summaryrefslogtreecommitdiff
path: root/quantum/split_common
AgeCommit message (Collapse)Author
2021-07-03Add support for NO_PIN to all matrix types (#12238)Drashna Jaelre
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-07-02Switch split_common to CRC subsystem (#13418)Stefan Kerkmann
2021-06-18Extensible split data sync (#11930)Nick Brassel
* Extensible split data sync capability through transactions. - Split common transport has been split up between the transport layer and data layer. - Split "transactions" model used, with convergence between I2C and serial data definitions. - Slave matrix "generation count" is used to determine if the full slave matrix needs to be retrieved. - Encoders get the same "generation count" treatment. - All other blocks of data are synchronised when a change is detected. - All transmissions have a globally-configurable deadline before a transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms). - Added atomicity for all core-synced data, preventing partial updates - Added retries to AVR i2c_master's i2c_start, to minimise the number of failed transactions when interrupts are disabled on the slave due to atomicity checks. - Some keyboards have had slight modifications made in order to ensure that they still build due to firmware size restrictions. * Fixup LED_MATRIX compile. * Parameterise ERROR_DISCONNECT_COUNT.
2021-06-09Use single memcmp to determine if matrix changed. (#13064)Nick Brassel
* Use memcmp to determine if matrix changed. * Firmware size issues. * Add documentation for the lack of need of MATRIX_ROW_PINS/MATRIX_COL_PINS, when overriding low-level matrix functions.
2021-06-01Add weak refs on reading rows/cols. (#13062)Nick Brassel
2021-05-29run: qmk cformat --core-onlyJames Young
2021-05-20matrix: wait for row signal to go HIGH for every row (#12945)Michael Stapelberg
I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem.
2021-05-14Fix spelling mistake regarding LED Matrix in split_common. (#12888)Joakim Tufvegren
2021-05-02[CI] Format code according to conventions (#12772)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-01Fixing transport's led/rgb matrix suspend state logic (#12770)XScorpion2
2021-04-22[CI] Format code according to conventions (#12650)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-04-22LED Matrix: Split (#12633)Ryan
2021-03-25Adding keyboard level weak function for slave matrix scan (#12317)XScorpion2
2021-03-03Format code according to conventions (#12088)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-03-03Split RGB Matrix (#11055)XScorpion2
* Split RGB Matrix * Suspend State sync for rgb matrix
2021-02-28Refactor of USB code within split_common (#11890)Joel Challis
* Initial refactor of usb code within split_common * Add headers * Correct disable condition * Format * Align func name
2021-02-16Format code according to conventions (#11928)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-16Split transport mirror (#11046)XScorpion2
* Split transport mirror support * Updated RGB Matrix to respond to electrical events instead of key events * split matrix slave fix
2021-02-07Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-07Migrate some tmk_core files to quantum (#11791)Joel Challis
* Migrate some tmk_core files to quantum * Fix build errors
2021-01-17`qmk cformat`Nick Brassel
2021-01-18Keep track of last matrix activity. (#11552)Nick Brassel
Co-authored-by: Dasky <daskygit@users.noreply.github.com> Co-authored-by: Dasky <daskygit@users.noreply.github.com>
2021-01-15Revert "Keep track of last matrix activity (#10730)"Nick Brassel
This reverts commit 79d1db332477963555416d9fff82ecac4399bd52.
2021-01-13fix matrix_io_delay() timing in quantum/matrix.c (#9603)Takeshi ISHII
* fix matrix_io_delay() timing in quantum/matrix.c * Updated comments explaining the need for matrix_io_delay() in quantum/matrix.c * fix matrix_io_delay() timing in quantum/split_common/matrix.c * Update quantum/matrix.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update quantum/split_common/matrix.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update quantum/matrix.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update quantum/split_common/matrix.c Co-authored-by: Ryan <fauxpark@gmail.com> * add waitOutputPinValid() and wait_cpuclock() into quantum/quantum.h and tmk_core/common/wait.h * add matrix_output_select_delay() and matrix_output_unselect_delay() * fix quantum/matrix_common.c, tmk_core/common/matrix.h * fix tmk_core/common/wait.h * fix quantum/quantum.h, tmk_core/common/wait.h * waitOutputPinValid() rename to waitInputPinDelay() in quantum/quantum.h. * waitOutputPinValid() rename to waitInputPinDelay() in quantum/matrix_common.c * update tmk_core/common/wait.h * update comment in quantum/matrix.c, quantum/split_common/matrix.c * update quantum/quantum.h: Make more margin in the GPIO_INPUT_PIN_DELAY default value. Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-12Keep track of last matrix activity (#10730)Nick Brassel
* Allow recording of the last matrix activity time, to simplify implementation of display timeouts and the like. * Add requested changes from code review. * Simplify split matrix last changed.
2020-12-17Fix duplicate I2C_KEYMAP_START define (#11237)Ryan
2020-12-18Merge remote-tracking branch 'upstream/master' into developfauxpark
2020-12-17Run cformat and dos2unix manually (#11235)Ryan
2020-12-17Add modifier state to the split keyboard transport (#10400)Casey Webster
* Add modifier state to the split transport This adds modifier state to the i2c and serial transport for split keyboards. The purpose of this is to allow e.g. displaying modifier state on the slave side of a split keyboard on an oled. This adds one byte to the data transferred between halves. This also fixes a missing ifdef guard for BLACKLIGHT_ENABLE. Break modifiers into real/weak/oneshot Fix incorrect slave serial mod setting Fix typo in serial weal mod setter Fix build errors for the I2C code that I introduced Code cleanup and formatting per project preferences Correctly get oneshot mods Fix missing braces Remove unneeded ifdef guard Make the added state transport optional Add documentation for the new define to enable this feature Fix stray grave mark * Fix error introduced in conflict resolution
2020-12-11Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-11Normalise include statements in core code (#11153)Ryan
* Normalise include statements in core code * Missed one
2020-12-01[Split] Sync Timer feature (#10997)XScorpion2
A timer that is kept in sync between the halves of a split keyboard
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-10-02Fix SPLIT_KEYBOARD compilation for ATMega*U2, which doesn't have VBUS/OTG ↵sol
control (#10460) Co-authored-by: s-ol <s-ol@users.noreply.github.com>
2020-07-04add SPLIT_HAND_MATRIX_GRID support (#8685)Takeshi ISHII
Co-authored-by: Danny <nooges@users.noreply.github.com>
2020-06-10Fixed slave-side keyboard half unresponsiveness (#9360)Adrian
* Fixed slave-side keyboard half unresponsiveness due to how LUFA handles USB_Disable() * changes to formatting Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-03Move encoder_read to common location (#9003)Joel Challis
2020-05-22Fix build. (#9163)Nick Brassel
2020-05-21format code according to conventions [skip ci]QMK Bot
2020-05-21Slight speed increases for matrix scanning (#9150)Joel Challis
2020-05-21Use LUFA funcs for split_util (#8594)Joel Challis
2020-05-02Move encoder_read to common locationzvecr
2020-03-25Run clang-format manually to fix recently changed files (#8552)Joel Challis
2020-03-23Add Word Per Minute calculation feature (#8054)brickbots
* Add Word Per Minute calculation feature * Fix copyright info * Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs * Simplify logic for keycode filtering * Adding link from summary to wpm_feature info * Update docs/feature_wpm.md Typo in function prototype example in docs Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Add WPM transport via i2c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-02-25Split - Avoid race condition during matrix_init_quantum (#8235)Joel Challis
* Avoid race condition during matrix_init_quantum * spelling is hard
2020-02-21Allow 30us matrix delay to be keyboard/user overridable (#8216)Joel Challis
* Allow 30us matrix delay to be configurable via define * Move wait logic to matrix_common * Move wait logic to matrix_common - fix wait includes
2020-02-12Align split_common/matrix.c with matrix.c (#8153)Joel Challis
2020-02-04Reduce SPLIT_USB_TIMEOUT by 500ms (#7637)Joel Challis
* Update SPLIT_USB_TIMEOUT -500ms * Align keyboard level SPLIT_USB_TIMEOUT defaults * Align keyboard level SPLIT_USB_TIMEOUT_POLL * Review fixes
2020-01-24Update split serial code to use driver pattern (#7990)Joel Challis
* Move avr serial code to drivers * Update src+= serial.c to driver pattern
2020-01-19Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915)fauxpark
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards * Define diode direction for failing boards * Matching parentheses * Put onekey diode directions in top level config
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:31:57 +0000