summaryrefslogtreecommitdiff
path: root/keyboards/ymdk_np21
AgeCommit message (Collapse)Author
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-03-10Refactor to use led config - Part 6 (#12115)Joel Challis
* Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * revert changes
2021-01-07clean up generate-api errorsZach White
2020-11-16[Keyboard] YMDK NP21: correct numpad layout matrix (#10874)Cole Helbling
I noticed that my KC_PPLS and KC_PENT keys weren't actually doing anything. By looking at the ortho_6x4 layout, I guessed that maybe the pins were incorrect and guessed the proper ones. Now, my numpad is fully functional.
2020-08-31[Keyboard] YMDK NP21 refactor (#10181)Ryan
2020-05-17Remove `DEBUG_LEVEL` from V-USB rules.mk (#9117)Ryan
2020-03-31V-USB: Consolidate usbconfig.h's into a single file (#8584)Ryan
2020-03-28V-USB: Use structs for USB descriptors (#8572)Ryan
* V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass
2020-03-26V-USB: Use manufacturer and product strings from config.h (#7797)Ryan
* V-USB: Use manufacturer and product strings from config.h * Update board configs
2020-03-09Remove NO_UART defines from config.h for V-USB boards (#8351)Ryan
2020-02-07[Keyboard] YMDK NP21: matrix and keymap refactor (#8112)James Young
* YMDK NP21: matrix and keymap refactor - refactored layout macros - LAYOUT_ortho_6x4 orients the keyboard with the USB port to the back instead of to the right - LAYOUT uses the previous sideways orientation (included for backwards compatibility) - removed redundant includes from ymdk_np21.h - added a readme for the default keymap * add Configurator layout support
2020-01-23Fix LED configuration for PS2AVRGB boards (#7989)fauxpark
* Fix LED configuration for PS2AVRGB boards * Undo backlight on state changes
2020-01-20Invert Num Lock LED state (#7945)clovervidia
2020-01-18Remove custom backlight code for PS2AVRGB boards (#7775)fauxpark
* Remove custom backlight code for PS2AVRGB boards * Remove custom driver setting * BACKLIGHT_BREATHING goes in config.h, not here * Don't need to include backlight.c again here either * Turn on backlight for Canoe * Disable console on a few boards due to oversize
2020-01-02Remove custom matrix from PS2AVRGB boards (#7396)fauxpark
* Remove custom matrix from PS2AVRGB boards * Add custom backlight.c to SRC for bminiex, for now * Add missing DIODE_DIRECTIONs
2019-11-23[Keyboard] Update ATmega32A readme files to match template (#7462)Joel Challis
* Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review
2019-11-15Set device version from config.h for V-USB boards (#7316)fauxpark
2019-11-15Add support for configurable polling interval and power usage o… (#7336)fauxpark
* Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now
2019-11-03Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245)fauxpark
* Convert remaining PS2AVRGB boards to I2C WS2812 driver * Add back functions to make the custom matrices happy
2019-09-20Cleanup rules.mk for 32A and 328P keyboards (#6767)fauxpark
2019-01-26Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
2018-10-01Fix YMDK NP21 keyboard to use proper keyboard level functions (#3042)Drashna Jaelre
* Use proper function levels * Add matrix init functions * Convert KEYMAP to LAYOUT Or @mechmerlin is going to hunt me down and harm me... probably :) * Fix conflict issues
2018-07-23ps2avrgb: fix incorrect avr ports specified (for numlock and capslock LEDs) ↵Kenneth Aloysius
(#3453) * Add M6-A keymap * Update XD60 keymap * Update XD60 keymap readme * Update JJ40 and Let's Split keymaps * Add readme for M6-A * Fix typo, update JJ40 README * Update jj40 readme * Cleanup jj40 keymap * Revert Let's Split QWERTY layer to default before #2010 * Update numpad layers * Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer * Keep ASCII art consistent with keymap * Staryu: initial port * Add personal keymap * Added and updated READMEs * Fix: default keymap for staryu * Rudimentary backlight support. * Enabled mousekeys for default keymap * use QMK_KEYBOARD_H and LAYOUT * Update readme.md for NIU mini: flash using avrdude * Fix missing linebreaks for Staryu README * Update readme.md * Update PS2AVRGB boards with new matrix.c * Update canoe matrix.c; untested * Fix canoe.c for building (needs matrix_scan_user and matrix_init_user) * Add personal Iris keymap * Update keymap * Update keymap * Update keymap, disable backlighting and underglow * Move PrintScreen button * Add README * Update personal keymaps * Add INS key * Limit USB max power consumption, change Fn to MENU * Remove Numpad layer (easy to accidentally toggle) * Fix backlighting for ps2avrgb * Update comments to refer to actual pin naming * Possible fix for xyverz ortho keymap: define RGBLED_NUM * Make led_set_user in backlight.c overridable * Add changes to address points raised in code review, untested (don't have build env right now)
2018-01-28Support for YMDK NP21 (#2316)sanosis
* ymdk_np21 initial support Base support of ymdk_np21 - based on jj40. Full grid layout * Update README.md Replacing description. * Adding YMDK NP21 to comunity list. Adding YMDK NP21 to community supported list.