summaryrefslogtreecommitdiff
path: root/keyboards/torn
AgeCommit message (Collapse)Author
2023-10-13Dedupe I2C, SPI, UART driver inclusions (#22253)Ryan
2023-08-15OLED: driver naming cleanups (#21710)Ryan
2023-05-01Move `USB_MAX_POWER_CONSUMPTION` to data driven (#20648)Ryan
2023-04-01Move split layouts to data driven (#20290)Ryan
2023-03-20Clean up usage of `QMK_KEYBOARD_H` (#20167)Ryan
2023-03-17Remove trailing zeroes in info.json layouts (#20156)Ryan
2023-02-26Move encoder config to data driven (#19923)Ryan
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-08Migrate `MCU` and `BOOTLOADER` to data-driven (#19529)Ryan
2023-02-03Debounce defines cleanup (#19742)Ryan
* Clean up `DEBOUNCE` in config.h, 0-9 * Clean up `DEBOUNCE` in config.h, A * Clean up `DEBOUNCE` in config.h, B * Clean up `DEBOUNCE` in config.h, C * Clean up `DEBOUNCE` in config.h, D * Clean up `DEBOUNCE` in config.h, E * Clean up `DEBOUNCE` in config.h, F * Clean up `DEBOUNCE` in config.h, G * Clean up `DEBOUNCE` in config.h, H * Clean up `DEBOUNCE` in config.h, handwired * Clean up `DEBOUNCE` in config.h, I * Clean up `DEBOUNCE` in config.h, J * Clean up `DEBOUNCE` in config.h, K * Clean up `DEBOUNCE` in config.h, L * Clean up `DEBOUNCE` in config.h, M * Clean up `DEBOUNCE` in config.h, N * Clean up `DEBOUNCE` in config.h, O * Clean up `DEBOUNCE` in config.h, P * Clean up `DEBOUNCE` in config.h, Q * Clean up `DEBOUNCE` in config.h, R * Clean up `DEBOUNCE` in config.h, S * Clean up `DEBOUNCE` in config.h, T * Clean up `DEBOUNCE` in config.h, U * Clean up `DEBOUNCE` in config.h, V * Clean up `DEBOUNCE` in config.h, W * Clean up `DEBOUNCE` in config.h, X * Clean up `DEBOUNCE` in config.h, Y * Clean up `DEBOUNCE` in config.h, Z * Remove default debounce from info.json * Migrate non-default debounce to info.json
2023-01-31Remove usages of config_common.h from config.h files. (#19714)Nick Brassel
2022-12-13Remove IGNORE_MOD_TAP_INTERRUPT_PER_KEY in favour of ↵precondition
HOLD_ON_OTHER_KEY_PRESS_PER_KEY (#15741)
2022-10-11Remove legacy keycodes, part 3 (#18669)Ryan
* `KC__VOLDOWN` -> `KC_VOLD` * `KC__VOLUP` -> `KC_VOLU` * `KC__MUTE` -> `KC_MUTE` * `KC_POWER` -> `KC_PWR`
2022-08-30Use a macro to compute the size of arrays at compile time (#18044)Jeff Epler
* Add ARRAY_SIZE and CEILING utility macros * Apply a coccinelle patch to use ARRAY_SIZE * fix up some straggling items * Fix 'make test:secure' * Enhance ARRAY_SIZE macro to reject acting on pointers The previous definition would not produce a diagnostic for ``` int *p; size_t num_elem = ARRAY_SIZE(p) ``` but the new one will. * explicitly get definition of ARRAY_SIZE * Convert to ARRAY_SIZE when const is involved The following spatch finds additional instances where the array is const and the division is by the size of the type, not the size of the first element: ``` @ rule5a using "empty.iso" @ type T; const T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) @ rule6a using "empty.iso" @ type T; const T[] E; @@ - sizeof(E)/sizeof(T) + ARRAY_SIZE(E) ``` * New instances of ARRAY_SIZE added since initial spatch run * Use `ARRAY_SIZE` in docs (found by grep) * Manually use ARRAY_SIZE hs_set is expected to be the same size as uint16_t, though it's made of two 8-bit integers * Just like char, sizeof(uint8_t) is guaranteed to be 1 This is at least true on any plausible system where qmk is actually used. Per my understanding it's universally true, assuming that uint8_t exists: https://stackoverflow.com/questions/48655310/can-i-assume-that-sizeofuint8-t-1 * Run qmk-format on core C files touched in this branch Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-08-06Remove `UNUSED_PINS` (#17931)Nick Brassel
2022-08-04Move keyboard USB IDs and strings to data driven: T (#17899)Ryan
2022-07-02[Keymap] Update Miryoku (#16482)Manna Harbour
2021-12-01Tidy up `SLEEP_LED_ENABLE` rules (#15362)Ryan
2021-11-02[Core] Change OLED task function to be boolean (#14864)Drashna Jaelre
* [Core] Add kb level callbacks to OLED driver * Update keyboards and keymaps * Update docs * Update userspace configs * Add fix for my keymap ... * update lefty
2021-10-15[Keymap] Update Miryoku (#14827)Manna Harbour
2021-09-12Remove width, height and key_count from info.json (#14274)Ryan
2021-09-10Change USBasp and bootloadHID bootloaders to lowercase (#14354)Ryan
2021-08-24[Core] Refactor OLED to allow easy addition of other types (#13454)Xelus22
* add docs * core changes * update keyboards to new OLED * updated users to new OLED * update layouts to new OLED * fixup docs * drashna's suggestion * fix up docs * new keyboards with oled * core split changes * remaining keyboard files * Fix The Helix keyboards oled options * reflect develop Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-03Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-03[Keymap] Update Miryoku (#13307)Manna Harbour
Fix reddit link Duplicate open parenthesis next to close parenthesis on NSSL Add customisation instructions Add lily58 Add gergo Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com> Clean up LAYOUT macro formatting Add alternative vi-style navigation layout Add kyria Add minidox Change order of keyboards Add iris Expand TOC Re-order userspace subheadings Add atreus Add customisation section Add split_3x5_3 and split_3x6_3 layouts Add for_science Fix wrong paths in keyboard config.h and keymap.c headings Fix keyboard ordering Fix blank lines around headings Add compatibility with new org-mode version. Remove keyboards/crkbd now covered by layouts/split_3x6_3 Add Halmak Alphabetise alternative alpha arrangements Move build options out of base layer alphas headings Add list of keyboards supporting split_3x5_3 layout Enable Auto Shift and Retro Shift Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping) Change kyria thumb key mapping Add planck_mit layout Remove alternative bottom row support from ortho_4x12 Remove minidox - Covered by split_3x5_3 layout Add moonlander Remove KC_ macros Add 60_ansi layout Add ortho_5x15 layout Closes manna-harbour/qmk_firmware#5 Co-authored-by: Rob <rob@debank.tv> Fix typo (manna-harbour/qmk_firmware#7) Author: sonnius <sonnius@users.noreply.github.com> Add redox_w (manna-harbour/qmk_firmware#8) Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Add AUTO_SHIFT_NO_SETUP to reduce firmware size Update image paths Add instructions to checkout development branch Add kyria extended thumbs option, change default, add KLE Change clipboard keys - Change order to be mirror of windows bindings - Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster bindings for Undo and Redo - Add alternative bindings - Fun Cluster (original miryoku bindings) - Mac - Windows - Change prefix for local macros from X_ to U_ Disable Retro Shift, enable Auto Shift for non-alphas Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)" Add Experimental Features section Update miryoku image link Update cover image link Add dactyl_manuform/4x5 Add cutomisation examples Add https to remote example Fix dactyl_manuform/4x5 subset mapping Add extended thumbs to ortho_4x12 Update Colemak Mod-DH naming Closes manna-harbour/qmk_firmware#13 Add dactyl_manuform/5x6 Resolves manna-harbour/qmk_firmware#14 Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com> Add note on FORCE_LAYOUT - Needed to use EXTENDED_THUMBS on planck Add parent directories to keyboard headings and re-order Add keyboardio/atreus Resolves manna-harbour/qmk_firmware#15 Add torn Resolves manna-harbour/qmk_firmware#16 Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Change map to zip - Adds support for python3, still compatible with python2. Resolves manna-harbour/qmk_firmware#10 Resolves manna-harbour/qmk_firmware#19 Co-authored-by: Ori <ori@oribarbut.com> Add python-version Add sofle Add ergotravel Add ortho_5x12 Add ortho_4x10 Add :main no header argument to C code blocks resolves manna-harbour/qmk_firmware#11 resolves manna-harbour/qmk_firmware#12 Co-authored-by: RubioJr9 <u0893472@utah.edu> Add flipped layers and inverted-T nav alternative layouts - Separate tap_table into alphas_table and thumbs_table - Add mode argument to table-layout-half - Remove layer_name - Rename layers - Add mods and clipboard to MBO and mirror - Add MIRYOKU_LAYERS=FLIP - Add MIRYOKU_NAV=INVERTEDT Add layer diagrams Update contact section Update links for Bilateral Combinations and Retro Shift Add description and no reverse angle option to 60_ansi layout Update list of keyboards supporting community layouts - and example build command lines Change moonlander thumb keys Update list of keyboards supporting split_3x5_3 Add license to tangled C source files
2021-06-26Error log cleanup (#13349)Zach White
* error log cleanup: 40percentclub/25 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x5 * error log cleanup: 40percentclub/4x4 ☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x8 ☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x16 * error log cleanup: 40percentclub/5x5 ☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x5 * error log cleanup: 40percentclub/nori ☒ 40percentclub/nori: Claims to support a community layout that does not exist: ortho_4x8 * error log cleanup: barracuda ☒ barracuda: Claims to support a community layout that does not exist: ortho_3x11 * error log cleanup: bpiphany/frosty_flake ☒ keyboards/bpiphany/frosty_flake/frosty_flake.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! * error log cleanup: bpiphany/pegasushoof/2013 ☒ keyboards/bpiphany/pegasushoof/2013/2013.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! * error cleanup: bpiphany/pegasushoof/2015 ☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_iso: Nested layout macro detected. Matrix data not available! * error log cleanup: 40percentclub ☒ 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x10 ☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x10 * error cleanup: converter/usb_usb ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! * error cleanup: ergo42 ☒ ergo42/rev1: Claims to support a community layout that does not exist: ortho_4x14 * error cleanup: handwired/412_64 ☒ handwired/412_64: Claims to support a community layout that does not exist: ortho_4x16 * error log cleanup: handwired/tritium_numpad ☒ handwired/tritium_numpad: Claims to support a community layout that does not exist: nontra_6x4 * error log cleanup: handwired/xealous/rev1 ☒ handwired/xealous/rev1: Claims to support a community layout that does not exist: split60 * error log cleanup: kbdfans/kbd67/rev2 ⚠ kbdfans/kbd67/rev2: info.json uses alias name LAYOUT_65_ansi_blocker_splitbs instead of LAYOUT_65_ansi_blocker_split_bs * error cleanup: keebio/nyquist ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! * error cleanup: kindakeyboards/conone65 ☒ kindakeyboards/conone65: Claims to support a community layout that does not exist: 65_iso_split_bs * error cleanup: latinpadble ☒ latinpadble: Claims to support a community layout that does not exist: pad * error cleanup: masterworks/classy_tkl/rev_a ☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_ansi_wkl * error cleanup: meira ⚠ meira/featherble: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT ⚠ meira/promicro: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT * error cleanup: nopunin10did/jabberwocky ⚠ nopunin10did/jabberwocky: MANUFACTURER in config.h is overwriting manufacturer in info.json * error cleanup: ok60 ☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift * error cleanup: ok60 ☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift * error cleanup: planck ☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ⚠ planck/thk: DEBOUNCE in config.h is overwriting debounce in info.json ⚠ planck/thk: DEVICE_VER in config.h is overwriting usb.device_ver in info.json ⚠ planck/thk: DIODE_DIRECTION in config.h is overwriting diode_direction in info.json ⚠ planck/thk: MANUFACTURER in config.h is overwriting manufacturer in info.json ⚠ planck/thk: PRODUCT_ID in config.h is overwriting usb.pid in info.json ⚠ planck/thk: VENDOR_ID in config.h is overwriting usb.vid in info.json ⚠ planck/thk: QMK_ESC_OUTPUT in config.h is overwriting qmk_lufa_bootloader.esc_output in info.json ⚠ planck/thk: QMK_ESC_INPUT in config.h is overwriting qmk_lufa_bootloader.esc_input in info.json ⚠ planck/thk: QMK_LED in config.h is overwriting qmk_lufa_bootloader.led in info.json ⚠ planck/thk: QMK_SPEAKER in config.h is overwriting qmk_lufa_bootloader.speaker in info.json ⚠ planck/thk: Matrix pins are specified in both info.json and config.h, the config.h values win. ⚠ planck/thk: LAYOUTS in rules.mk is overwriting community_layouts in info.json ⚠ planck/thk: Feature mousekey is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature extrakey is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature console is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature command is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature sleep_led is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature nkro is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature backlight is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature rgblight is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature bluetooth is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature audio is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature encoder is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature dip_switch is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature bootmagic_lite is specified in both info.json and rules.mk, the rules.mk value wins. * error cleanup: primekb/prime_m ☒ primekb/prime_m: Claims to support a community layout that does not exist: ortho_5x6 * error cleanup: rgbkb/sol/rev2 ⚠ rgbkb/sol/rev2: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(BACKLIGHT_LEDS + FULLHAND_LEDS)' * error log cleanup: shk9 ☒ shk9: Claims to support a community layout that does not exist: ortho_3x3 * error log cleanup: sowbug ⚠ sowbug/68keys: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: 'DRIVER_LED_TOTAL' ⚠ sowbug/ansi_tkl: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(DRIVER_LED_TOTAL)' * error log cleanup: torn ☒ torn: Claims to support a community layout that does not exist: split_3x6_4 * error cleanup: ymdk/np24/u4rgb6 ☒ ymdk/np24/u4rgb6: Claims to support a community layout that does not exist: ortho_4x6 * error cleanup: masterworks/classy_tkl/rev_a ☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_iso_wkl
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-21Convert Encoder callbacks to be boolean functions (#12805)Drashna Jaelre
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2021-03-16[Keyboard] Fix issue with process_record_kb in Torn (#12189)Kyle McAlpine
2021-01-24[Keyboard] Add layout to torn keyboard (#11684)Brian Romanko
2021-01-13[Keyboard] Improvements for the Torn keyboard (#11268)Richard Titmuss
* Add bongo cat animation * Map all keys on base layer ... to make it easier to test newly built keyboards. The encoders are optional and can be placed in different locations. * Fix Torn in QMK configurator This removes additional variables defined in the keymap.c file, so that the default firmware can be compiled by the configurator. Co-authored-by: Richard Titmuss <richardt@spotify.com>
2020-12-05Add a custom keymap for Torn keyboard (#11017)Alexander Dergachev
2020-09-19[Keyboard] Add Torn keyboard (#10207)Richard Titmuss
* Add Torn keyboard * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> * Remove via json file * Add mcp23081_pin_t * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: Drashna Jaelre <drashna@live.com> * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Richard Titmuss <richardt@spotify.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>