summaryrefslogtreecommitdiff
path: root/keyboards/planck/rev6
AgeCommit message (Collapse)Author
2021-09-30Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633)Ryan
2021-09-12Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)Ryan
2021-09-12Remove width, height and key_count from info.json (#14274)Ryan
2021-08-16Remove MIDI Configuration boilerplate (#11151)James Young
* remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> * fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} + ``` * align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} + ``` * remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-24Clean up remaining RGB_DISABLE_WHEN_USB_SUSPENDED defines (#13689)Drashna Jaelre
2021-07-24Remove deprecated callbacks for encoders and dip switches (#13404)Drashna Jaelre
2021-07-01Convert Dip Switch callbacks to boolean functions (#13399)Drashna Jaelre
2021-06-30Remove `API_SYSEX_ENABLE`s from rules.mk (#13389)Ryan
2021-06-09Fix RGB/LED Suspend defines (#13146)Drashna Jaelre
2021-06-08Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)Ryan
* Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-04-25Add RGB matrix suspend wake function for Planck/rev6 (#12290)Albert Y
* Add RGB matrix suspend wake function for Planck/rev6 * Update suggested definition to allow user override. Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: filterpaper <filterpaper@localhost> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-04-22VIA support for Planck Rev6 (#9144)George Wietor
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: George Wietor <george@LIGHT-GRAY.local> Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2021-03-13Document LED physical location index for Planck and Preonic (#12147)Albert Y
Co-authored-by: filterpaper <filterpaper@localhost>
2021-02-27remove keyboard_folder from info.jsonZach White
2021-02-15Audio system overhaul (#11820)Drashna Jaelre
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit bfe468ef1 start morphing wavetable 474d100b5 refined a bit 208bee10f play_notes working 3e6478b0b start in-place documentation of dac settings 3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right) 73853d651 5 voices at 44.1khz dfb401b95 limit voices to working number 9632b3379 configuration for the ez 6241f3f3b notes working in a new way * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commit splits off the plank example keymap from commit f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both * refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac * refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation pulls three copies of the same code into one function which should improve readability and maintainability :-) * refactoring: move common code of arm and avr implementation into a separate/new file * refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs * refactoring: audio_avr_pwm - replacing function defines with plain register defines aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing * add audio-arm-pwm since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx) this code works on a "BluePill" clone, with an STM32F103C8B * clang-format changes on quantum/audio/* only * audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths * audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup) * refactoring: remove unused file from/for atmel-avr chips * refactoring: remove unused (avr) wavetable file * audio_arm_dac: adapt dac_end callback to changed chibios DAC api the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object. this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count * audio-arm-dac: show a compile-warning on undefined audio-pins Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio_arm_dac: switch from exemplary wavetable generation to sine only sine+triangle+squrare is exemplary, and not realy fit for "production" use 'stairs' are usefull for debugging (hardware, with an oscilloscope) * audio_arm_dac: enable output buffers in the STM32 to drive external loads without any additional ciruitry - external opamps and such * audio: prevent out-of-bounds array access * audio_arm_dac: add output-frequency correcting factor * audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition and do some code-cleanup, refine documentation, ... * audio_arm_pwm: increase pwm frequency for "higher fidelity" on the previous .frequency=100000 higher frequency musical notes came out wrong (frequency measured on a Tektronix TDS2014B) note | freq | arm-pwm C2 | 65.4 | 65.491 C5 | 523.25 | 523.93 C6 | 1046.5 | 1053.38 C7 | 2093 | 2129 C8 | 4186 | 4350.91 with .frequency = 500000 C8 | 4186 | 4204.6 * audio refactoring: remove unused variables * audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second * audio: allow feature selection in rules.mk so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up) or select the "pin alternate" pwm mode, for example on STM32F103 * audio-refactoring: move codeblocks in audio.[ch] into more coherent groups and add some inline documentation * audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm] untangeling the relation between audio.c and the two drivers and adding more documenting comments :-) * audio_avr_pwm: getting it back into working condition, and cleanup+refactor * audio-refactoring: documentation and typo fixes Co-Authored-By: Nick Brassel <nick@tzarc.org> * audio-refactoring: cleanup defines, inludes and remove debug-prints * audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged' * audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers * audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable * audio_chibios_dac: math.h has fmod for this * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface * audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines have the user select a pin by configuration in rules.mk instead of a define in config.h has the advantage of beeing in a common form/pattern across all audio-driver implementations * audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines * audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played * audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency... * audio-refactoring: get 'play_note' working again with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue * audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment) * audio-refactoring: moore documentation and some cleanup * audio-avr-pwm: no fallback on unset AUDIO_PIN this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy * audio-refactoring: untangling terminology: voice->tone the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet) * audio-pwm: allow freq=0 aka a pause/rest in a SONG continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion) * audio-refactoring: audio_advance_note -> audio_advance_state since it does not only affect 'one note', but the internally kept state as a whole * audio-refactoring: untangling terminology: polyphony the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time * audio-chibios-dac: add zero-crossing feature have tones only change/stop when the waveform approaches zero - to avoid audible clicks note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too * audio-refactoring: feature: time-multiplexing of tones on a single output channel this feature was in the original avr-pwm implementation misnomed as "polyphony" with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) ) * audio-avr-pwm: get music-mode working (again) on AVRs with both pwm channels, or either one of the two :-) play_notes worked already - but music_mode uses play_note * audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note * audio-arm-dac: per define selectable sample-luts plus generation script in ./util * audio-refactoring: heh, avr has a MIN... * audio-refactoring: add basic dac audio-driver based on the current/master implementation whereas current=d96380e65496912e0f68e6531565f4b45efd1623 which is the state of things before this whole audio-refactoring branch boiled down to interface with the refactored audio system = removing all redundant state-managing and frequency calculation * audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER * audio-arm-pwm: split the software/hardware implementations into separate files which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained * audio-refactoring: update documentation * audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic * audio-arm-dac: dac_additive: stop the hardware when the last sample completed the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes * audio-refactoring: make function-namespace consistent - all (public) audio functions start with audio_ - also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note * audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_ * audio-arm-dac: update (inline) documentation regarding MAX for sample values * audio-chibios-dac: remove zero-crossing feature didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway * audio-arm-dac: dac_basic: respect the configured sample-rate * audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle like it already does in the avr implementation * audio-refactoring: get VIBRATO working (again) with all drivers (verified with chibios_[dac|pwm]) * audio-arm-dac: zero-crossing feature (Mk II) wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones * audio-refactoring: re-add note-resting -> introduce short_rest inbetween - introduce a short pause/rest between two notes of the same frequency, to separate them audibly - also updating the refactoring comments * audio-refactoring: cleanup refactoring remnants remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system also updates the TODOS * audio-refactoring: reserve negative numbers as unitialized frequencies to allow the valid tone/frequency f=0Hz == rest/pause * audio-refactoring: FIX: first note of melody was missing the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone and some code-indentations/cleanup of related parts * audio-arm-dac: fix hardware init-click due to wron .init= value * audio-refactoring: new conveniance function: audio_play_click which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c * audio-refactoring: use milliseconds instead of seconds for 'click' parameters clicks are supposed to be short, seconds make little sense * audio-refactoring: use timer ticks instead of counters local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway * audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks * audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines * audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace * audio.c: stop notes after new ones have been started avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks * audio.c: bugfix: actually play a pause instead of just idling/stopping which lead the pwm drivers to stop entirely... * audio-arm-pwm: pwm-software: add inverted output new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT * audio-arm-dac: basic: handle piezo configured&wired to both audio pins * audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring * audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps avoids running into issues when the uint32 of the timer overflows * audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST * audio_arm_dac: basic: add missing bracket * audio.c: fix delta calculation was in the wrong place, needs to use the 'last_timestamp' before it was reset * audio-refactoring: buildfix: wrong legacy macro for set_timbre * audio.c: 16bit timerstamps suffice * audio-refactoring: separate includes for AVR and chibios * audio-refactoring: timbre: use uint8 instead of float * audio-refactoring: duration: use uint16 for internal per-tone/note state * audio-refactoring: tonemultiplexing: use uint16 instead of float * audio-arm-dac: additive: set second pin output-low used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE * audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h to be consistent with how other features are handled in QMK * audio-refactoring: buildfix: wrong legacy macro for set_tempo * audio-arm-dac: additive: set second pin output-low -- FIXUP * audio.c: do duration<>ms conversion in uint instead of float on AVR, to save a couple of bytes in the firmware size * audio-refactoring: cleanup eeprom defines/usage for ARM, avr is handled automagically through the avr libc and common_features.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio.h: throw an error if OFF is larger than MAX * audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise. the extra pusles probably matter little, since this is no high-fidelity sound generation :P * audio-arm-dac: additive: move zero-crossing code out of dac_value_generate which is/should be user-overridable == simple, and doing one thing: providing sample values state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback * audio-arm-dac: dac-additive: zero-crossing: ramping up or down after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output * audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause * audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF 1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P * audio-arm-dac: update synth_sample/_wavetable for new pin-defines * audio-arm-dac: default for AUDIO_DAC_VALUE_OFF turned out that zero or max are bad default choices: when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late * audio-arm-dac: additive: use DAC for negative pin instead of PAL, which only allows the pin to be configured as output; LOW or HIGH * audio-arm-dac: more compile-time configuration checks * audio-refactoring: typo fixed * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: add defines for B-pin as primary/only speaker also updates documentation. * audio-refactoring: update documentation with proton-c config.h example * audio-refactoring: move glissando (TODO) to voices.c refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input? * audio-refactoring: cleanup: one round of aspell -c * audio-avr-pwm: back to AUDIO_PIN since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5 so there is no need to deal with separate defines like AUDIO_PIN_B5 * audio-refactoring: add technical documentation audio_driver.md which moves some in-code documentation there * audio-arm-dac: move AUDIO_PIN checks into c-code instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler) * audio-arm-dac: compile-fix: set AUDIO_PIN if unset workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error" * audio-refactoring: document tone-multiplexing feature * audio-refactoring: Apply suggestions from documentation review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-refactoring: Update docs/audio_driver.md * audio-refactoring: docs: fix markdown newlines Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>). Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-arm-dac: additive: fix AUDIO_PIN_ALT handling * audio-arm-pwm: align define naming with other drivers Co-authored-by: Joel Challis <git@zvecr.com> * audio-refactoring: set detault tempo to 120 and add documentation for the override * audio-refactoring: update backlight define checks to new AUDIO_PIN names * audio-refactoring: reworking PWM related defines to be more consistent with other QMK code Co-authored-by: Joel Challis <git@zvecr.com> * audio-arm: have the state-update-timer user configurable defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c) stm32f1 might need to set this to GPTD4, since 6 and 8 are not available * audio-refactoring: PLAY_NOTE_ARRAY was already removed in master * Add prototype for startup * Update chibiOS dac basic to disable pins on stop * Add defaults for Proton C * avoid hanging audio if note is completely missed * Don't redefine pins if they're already defined * Define A4 and A5 for CTPC support * Add license headers to keymap files * Remove figlet? comments * Add DAC config to audio driver docs * Apply suggestions from code review Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Add license header to py files * correct license header * Add JohSchneider's name to modified files AKA credit where credit's due * Set executable permission and change interpeter * Add 'wave' to pip requirements * Improve documentation * Add some settings I missed * Strip AUDIO_DRIVER to parse the name correctly * fix depreciated * Update util/audio_generate_dac_lut.py Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Fix type in clueboard config * Apply suggestions from tzarc Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Johannes <you@example.com> Co-authored-by: JohSchneider <JohSchneider@googlemail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joshua Diamond <josh@windowoffire.com> Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2021-01-27Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-01-27Remove `MIDI_ENABLE_STRICT` from keyboards' config.h (#11679)Ryan
2021-01-21ChibiOS conf migrations... take 11 (#11646)Nick Brassel
* Allow forcing re-migration. * ChibiOS conf upgrade for acheron/arctic acheron/arctic - 2aedbe9103fff6c37e596c33c9ed337957647368 * ChibiOS conf upgrade for acheron/austin acheron/austin - c2f4e3b7fc9f1c3d64f47d139bc58367afeca1b7 * ChibiOS conf upgrade for acheron/keebspcb acheron/keebspcb - 1ba976e409732bfa5c0487dd33e20bec06852ce4 * ChibiOS conf upgrade for acheron/lasgweloth acheron/lasgweloth - 01a2e70d0d86de0ff05d0b898a6e3b4428ee1581 * ChibiOS conf upgrade for aeboards/ext65/rev2 aeboards/ext65/rev2 - 3c9a45cafb4ed6d9672aaff4548b105193633a87 * ChibiOS conf upgrade for ai03/vega ai03/vega - 1bd0dfccb99baa69bacd2d55f2bfa72019b8bf80 * ChibiOS conf upgrade for akegata_denki/device_one akegata_denki/device_one - a013823188660f5fca37c5763f160f8646aed7a7 * ChibiOS conf upgrade for at_at/660m at_at/660m - 9999583e8bec2772046132a22818482d24e18c84 * ChibiOS conf upgrade for box75 box75 - 1126206109a942237eea96f3a9608e3c9ed55f8e * ChibiOS conf upgrade for bt66tech/bt66tech60 bt66tech/bt66tech60 - b69120638a8b2c86c008fd0592be918383d8a454 * ChibiOS conf upgrade for cannonkeys/an_c cannonkeys/an_c - c755f6caaccbe2b30d95661a3d441b836534c29f * ChibiOS conf upgrade for cannonkeys/atlas cannonkeys/atlas - 1a18c55492a834b82715516ea4cd4d3d94508743 * ChibiOS conf upgrade for cannonkeys/chimera65 cannonkeys/chimera65 - 6bf226ef353da9106c381a8ac95a9b90529327e5 * ChibiOS conf upgrade for cannonkeys/db60 cannonkeys/db60 - 07e3246f8e3adc5b6918809e6a5aa1ad064b9a09 * ChibiOS conf upgrade for cannonkeys/devastatingtkl cannonkeys/devastatingtkl - 907d258e29eb7e35b1f868c1ea6148bfd1e3a3f2 * ChibiOS conf upgrade for cannonkeys/instant60 cannonkeys/instant60 - ac876ff6746b08839a3936dd4126b52683b763f4 * ChibiOS conf upgrade for cannonkeys/instant65 cannonkeys/instant65 - 3b8c89ec5fecbdb35cccb00c45e64a798528dbda * ChibiOS conf upgrade for cannonkeys/iron165 cannonkeys/iron165 - 0814ec4067d9857b0134e38384f272cf7172fb03 * ChibiOS conf upgrade for cannonkeys/obliterated75 cannonkeys/obliterated75 - 0f376e5d9a232c62e9c60f8fdc81d12732352ddc * ChibiOS conf upgrade for cannonkeys/onyx cannonkeys/onyx - d35134ebe09046b91ab176035d3742d80b23ed8e * ChibiOS conf upgrade for cannonkeys/ortho48 cannonkeys/ortho48 - 828dbfbb013ff4fefe75044b3c9fd31fec5e95a1 * ChibiOS conf upgrade for cannonkeys/ortho60 cannonkeys/ortho60 - 2aca4dd4234e0dac828f5fa15ae5b3bc3c0605dc * ChibiOS conf upgrade for cannonkeys/ortho75 cannonkeys/ortho75 - 4af8aaaded0ff53e9c01473f5968cc169f268647 * ChibiOS conf upgrade for cannonkeys/practice60 cannonkeys/practice60 - e01df551d9483eeb3f825fcc453317fe65f674b5 * ChibiOS conf upgrade for cannonkeys/practice65 cannonkeys/practice65 - 156163789d4c96cdd4787895788c1d02a2367f5c * ChibiOS conf upgrade for cannonkeys/rekt1800 cannonkeys/rekt1800 - 15882afb6373dea3e5f7ed13c19744ee2463f3bf * ChibiOS conf upgrade for cannonkeys/sagittarius cannonkeys/sagittarius - f49fee611ffcc02cb3dc7f249fc8c83f136907b9 * ChibiOS conf upgrade for cannonkeys/satisfaction75 cannonkeys/satisfaction75 - 2c9fbbea3a38820774f6ff436ef51017b545475a * ChibiOS conf upgrade for cannonkeys/savage65 cannonkeys/savage65 - ddd764be363c46f3e9b1a16151bd02d8f66b2dd4 * ChibiOS conf upgrade for cannonkeys/tmov2 cannonkeys/tmov2 - 7af36cd2a42015838b77697624e90008ffa72778 * ChibiOS conf upgrade for cannonkeys/tsukuyomi cannonkeys/tsukuyomi - a120bea5dacb2cd6f143458cece46d2860ea196d * ChibiOS conf upgrade for cheshire/curiosity cheshire/curiosity - 93d8fe3b7a8e028d4b015941ee71b50afe86bc8a * ChibiOS conf upgrade for coarse/cordillera coarse/cordillera - 7d986d3f534786f302cbf74a5e6b7e51ffe60093 * ChibiOS conf upgrade for converter/siemens_tastatur converter/siemens_tastatur - 3f79f1467bbc56f284aceafd76ab5c6a1cbb68f4 * ChibiOS conf upgrade for cutie_club/borsdorf cutie_club/borsdorf - f8c6015b7aacfd5edef4f22f719eea30660005e7 * ChibiOS conf upgrade for dekunukem/duckypad dekunukem/duckypad - d9c162d0867d3925cca2e653a3a3870eac2d23d2 * ChibiOS conf upgrade for ebastler/isometria_75/rev1 ebastler/isometria_75/rev1 - 2ecdd00b8c6cc794a7014747185b88374d5766c0 * ChibiOS conf upgrade for ergodox_infinity ergodox_infinity - 76736c701db22e890764481c25bd38badf32a1cf * ChibiOS conf upgrade for ergodox_stm32 ergodox_stm32 - a7bdb0b7822617ca0f9d316a082874ac0fef5964 * ChibiOS conf upgrade for function96 function96 - 1b9e394a86dab24b85d160afe9281b5e7652afe2 * ChibiOS conf upgrade for geekboards/macropad_v2 geekboards/macropad_v2 - de261e46a42cc7b7ff793e26200669f94b1dbb18 * ChibiOS conf upgrade for generic_panda/panda65_01 generic_panda/panda65_01 - 592d2443033875e0309506aa8cb5212389054458 * ChibiOS conf upgrade for handwired/ck4x4 handwired/ck4x4 - 9d7d4af7f2d787afd638e976334cd37c490040d7 * ChibiOS conf upgrade for handwired/onekey/blackpill_f401 handwired/onekey/blackpill_f401 - c9257a30203b3a0e5aa18b35e07281fcd043ab5d * ChibiOS conf upgrade for handwired/onekey/blackpill_f411 handwired/onekey/blackpill_f411 - dfccc2c6b245cfb561faba60c9f3fc7af8c3db30 * ChibiOS conf upgrade for handwired/onekey/bluepill handwired/onekey/bluepill - 393f4b94e9a0fbc9cd00de1acde346ad72250b4a * ChibiOS conf upgrade for handwired/onekey/stm32f0_disco handwired/onekey/stm32f0_disco - d827881f9bed09fd41c7c4e9d066e96b6643a099 * ChibiOS conf upgrade for handwired/onekey/teensy_32 handwired/onekey/teensy_32 - dd90f6c823da80ba43afa41249a2bdbbab98b04c * ChibiOS conf upgrade for handwired/onekey/teensy_lc handwired/onekey/teensy_lc - 34596f2eeb62403cce532d20cf893ebd77fe2d05 * ChibiOS conf upgrade for handwired/pill60/blackpill_f401 handwired/pill60/blackpill_f401 - 20bbccb5058085076357f4fa956eede2c0af86e8 * ChibiOS conf upgrade for handwired/pill60/blackpill_f411 handwired/pill60/blackpill_f411 - e03a4c3ec3b9ba65b8067126a039a8eb2cd10e51 * ChibiOS conf upgrade for handwired/pill60/bluepill handwired/pill60/bluepill - 2fb721fb4376cde2067eed1c0c8acbf3bf5851c3 * ChibiOS conf upgrade for handwired/riblee_f401 handwired/riblee_f401 - 2823cd98d64c91b146dae343a32176d51772952b * ChibiOS conf upgrade for handwired/riblee_f411 handwired/riblee_f411 - 5cf7589c9a11c4ed14e7d28676ac836fbb07d013 * ChibiOS conf upgrade for handwired/sono1 handwired/sono1 - d972acee03efb4917fc42f7d72c0a416b67ebd4a * ChibiOS conf upgrade for handwired/t111 handwired/t111 - f947c1d59025fe04e7d7b999d80e20277be4366c * ChibiOS conf upgrade for handwired/twadlee/tp69 handwired/twadlee/tp69 - 48ab62464ba1f2651f4468cbec7c6058e3b8c158 * ChibiOS conf upgrade for handwired/z150 handwired/z150 - 35e85696845e965d7f2dcdb372ed20c17d42c2bb * ChibiOS conf upgrade for hub20 hub20 - f094036a182169b5a73f89f09f2ccaa3e5fc9e7e * ChibiOS conf upgrade for iron180 iron180 - 5efb6f21c848b3c964795d9debddceac7628933d * ChibiOS conf upgrade for jm60 jm60 - dbbdbe8b27b3c1d0a25981b2f75728d163d5d299 * ChibiOS conf upgrade for keebio/bdn9/rev2 keebio/bdn9/rev2 - 0031632523dddfc8f7b3a02cf9c5990ebbb3856d * ChibiOS conf upgrade for keebio/choconum keebio/choconum - 4484ef6936a497610ca5ae4d378bc07b2bc1b1c7 * ChibiOS conf upgrade for matrix/m20add matrix/m20add - 6068aeff5b14c26de8838180f4397800abe9f1aa * ChibiOS conf upgrade for matrix/noah matrix/noah - fcde175fb1d3f5bf0716ac5a880c2cc9ab4bbf7f * ChibiOS conf upgrade for misterknife/knife66 misterknife/knife66 - e7f3ceffb94fb8e680da2af27fa7cb1a0a52b699 * ChibiOS conf upgrade for misterknife/knife66_iso misterknife/knife66_iso - ee027db939c098f908f70f02ffa9cc3952139f70 * ChibiOS conf upgrade for nebula12 nebula12 - 2f3a25b6675dcd0fabe75e7bb63038d3cac19610 * ChibiOS conf upgrade for nemui nemui - 4030faa372512f766fd747876cb28176302453f9 * ChibiOS conf upgrade for nibiria/stream15 nibiria/stream15 - fd7b09affa208403099ef9bff1b756fac0d4f918 * ChibiOS conf upgrade for nightingale_studios/hailey nightingale_studios/hailey - 496a44b2f789cc59a6110c7c1c41d57e59c722be * ChibiOS conf upgrade for planck/rev6 planck/rev6 - 6fb8f0bc21b4ab774ce3d339fdf6f25d96059f10 * ChibiOS conf upgrade for primekb/meridian primekb/meridian - 8021ed99e8bdf92faab806780186cc924dd59e50 * ChibiOS conf upgrade for projectkb/alice projectkb/alice - ad7678d475a14c54f28b62d1c1b15f5b4c4448bc * ChibiOS conf upgrade for projectkb/signature87 projectkb/signature87 - de61338b0a5c477f39c000df8117dd3017c2643d * ChibiOS conf upgrade for ramonimbao/squishy65 ramonimbao/squishy65 - 2ea1a8b18c39d0e193bbbf5836191874d3aafc53 * ChibiOS conf upgrade for ramonimbao/wete ramonimbao/wete - a80b3b309f06566adcdf20234d81c1d5aa599b00 * ChibiOS conf upgrade for rart/rartlice rart/rartlice - c8c80c302428d62bb8b08e3185509a233a94f5f0 * ChibiOS conf upgrade for retro_75 retro_75 - 7434e266bba43ded8ca1ff75d77faa506473ca91 * ChibiOS conf upgrade for rocketboard_16 rocketboard_16 - 1182a8730a84b58eba5a470286b6db6134d36f54 * ChibiOS conf upgrade for satt/vision satt/vision - c85a28a8d7e321511a17a7e7084d0a7876d1779a * ChibiOS conf upgrade for technika technika - 7c59de348f0ec5f6ac9e260806a87aaf16fbafa2 * ChibiOS conf upgrade for tkc/godspeed75 tkc/godspeed75 - e447b39dca393736fbf289049699d5b4748bb8c6 * ChibiOS conf upgrade for tkw/stoutgat/v2/f411 tkw/stoutgat/v2/f411 - 58e9b909379ad107affbff0508e3923264b75426 * ChibiOS conf upgrade for viktus/styrka viktus/styrka - 36bf0921be79a8b037fdc25343584574a312be60 * ChibiOS conf upgrade for westfoxtrot/prophet westfoxtrot/prophet - 80036c8f986c8d3261d6b0748d2057eccab6430b * ChibiOS conf upgrade for whitefox whitefox - c9eccac0196c3e2e2ea6c90d3036283a3eabff2c * ChibiOS conf upgrade for wolfmarkclub/wm1 wolfmarkclub/wm1 - 0d22a426255b829a7805bd6a3ff927198b1e31b4 * ChibiOS conf upgrade for xelus/kangaroo xelus/kangaroo - fdb1ffb66f4841f662e968929f058d4fd403c97e * ChibiOS conf upgrade for xelus/trinityxttkl xelus/trinityxttkl - a9641e5b39b7bb38351b9109f0f381837b2e8e79 * ChibiOS conf upgrade for xelus/valor_frl_tkl xelus/valor_frl_tkl - 6c3b577852736a68727ec319c30712b3088e65cd * ChibiOS conf upgrade for xiaomi/mk02 xiaomi/mk02 - 4c1406ebfee73551a844ef7ab29fc5788d7e875c * ChibiOS conf upgrade for zoo/wampus zoo/wampus - 930c903e85478e220a235f45593c03512c66bc2a * ChibiOS conf upgrade for zvecr/split_blackpill zvecr/split_blackpill - c0e3e1583262e4cb0ebfe2efa6356ed6c5c957ca
2020-12-23Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-23Remove comments about custom ldscript for Teensy LC (#11224)Ryan
2020-12-03Add board specific to Proton-C, with usual defaults turned on. (#10976)Nick Brassel
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-08-15[Keyboard] Fix Planck/Rev6 compiler issue (#9953)Drashna Jaelre
Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.
2020-07-16planck/rev6: Enable WS2812 LED matrix with pwm driversRiley Inman
2020-05-302020 May 30 Breaking Changes Update (#9215)James Young
* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
2020-01-30Trim firmware sizes from default rules.mk, part 3 (#8045)ridingqwerty
2019-11-14[Core] Cleanup rules.mk for F303 keyboards (#7306)fauxpark
* Cleanup rules.mk for F303 keyboards * Fix small typo
2019-11-07[Keyboard] Enable RGB Light on ARM OLKB Keyboards (#7293)Drashna Jaelre
* Enable RGBLight on Planck Rev6 * Enable RGBLight on Preonic Rev3 All hail zvecr!
2019-10-25Cleanup rules.mk for 32U4 keyboards, N-Q (#7147)fauxpark
2019-09-21[Keyboard] fix OLKB layout macro aliases (#6761)noroadsleft
2019-09-03Add Dip Switch as a core feature (#6140)Drashna Jaelre
* Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-07-16Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328)Drashna Jaelre
* Remove the need to set NUM_OF_ENCODERS Instead, calculate the size of the array, and use that instead * Add hack for split common support * Remove NUM_OF_ENCODERS from keyboard config Can be reverted, if needed
2019-06-19[Keyboard] Planck Layout Macro Refactor, Part II (#6156)noroadsleft
* Move layout macros to revision folders * Update Planck EZ layout macros Planck EZ only supports one layout (centered 2u spacebar). Deleted all the other macros. * Flesh out QMK Configurator support Give each Planck revision its own info.json file. * Readme updates - give each revision its own readme - add the Planck EZ to the main Planck readme * Fix layout macro for Planck EZ Previous matrix didn't compile because the electrical matrix defined a k3b location, which was unused by the physical arguments. Drashna was kind enough to confirm the Planck EZ's matrix for me. Co-authored-by: Drashna Jaelre <drashna@live.com> * Pretend the Planck EZ supports ortho_4x12 layout The hardware doesn't, but doing so prevents CI errors because the default keymap uses LAYOUT_planck_grid. Going to pretend LAYOUT_ortho_4x12 is a valid layout for the Planck EZ. * Update Planck EZ's URL in info.json Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-06-12[Keyboard] Planck: Layout Macro Refactor (#4402)noroadsleft
* Planck: layout macro refactor Unified layout macro names across AVR and ARM boards. Currently certain layout macros are specific to either AVR or ARM when used in the QMK Configurator. If an AVR-specific macro is used for a Planck rev. 6, or an ARM-specific macro on a rev. 5 or earlier, the user receives a compile error. * Update keyboards/planck/planck.h per @drashna Changed KC_LAYOUT_ortho_4x12 alias to LAYOUT_kc_ortho_4x12. Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Add KC_KEYMAP alias for LAYOUT_kc macro per @drashna Update keyboards/planck/planck.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Fix LAYOUT_planck_1x2uC macro for Planck rev6 Thanks to drashna for testing. * Fix inline comment regarding revisions * Add specific info.json file for Planck rev6
2019-06-06Fix debounce conflicts in a few boardsDrashna Jaelre
2019-04-29Fix Planck and Preonic builds (#5658)noroadsleft
* Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-01-26Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
2019-01-10Adds Proton C Conversion (#4661)Jack Humbert
* adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2018-10-26add support for encoders to coreJack Humbert
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-08-27Fixes STM32F303XC timer issue for Planck Rev 6 (#3777)ishtob
* Adding my personal planck keymap * Adding readme.md to my keymap * Create my userspace add users/ishtob/ * Moved macros off keymap macros now exsists in my userspace, moved them off keyboard specific keymaps * Create my userspace add users/ishtob/ * rebase from main QMK repo * fixed compile error with planck rev6 keymap * fixed compile error with planck rev6 keymap * Revert "Merge branch 'master' of https://github.com/ishtob/qmk_firmware" This reverts commit 6c8a9a6eec7ec311802338ea361099612182465d, reversing changes made to 5c598d9a53a7f794d5be283ac40ca97631ae5578. * fixed issue where compile errors if private macro file is not present * Revert "fixed issue where compile errors if private macro file is not present" This reverts commit e0035df48ffb9a95aa94e8339c58ef539e0449cf. * Fixed STM32 timer issue with Planck Rev6 with tap mods * Revert "fixed compile error with planck rev6 keymap" This reverts commit 5c598d9a53a7f794d5be283ac40ca97631ae5578. * Revert "Revert "fixed compile error with planck rev6 keymap"" This reverts commit c36896ca718f8b9bb3c653d7532797e9129477e3. * Fixed compile issues with my personal userspace and keymap utilizing the userspace
2018-07-16Adds support for Planck Rev 6 (#2666)Jack Humbert
* initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT