summaryrefslogtreecommitdiff
path: root/keyboards/orthodox/keymaps
AgeCommit message (Collapse)Author
2023-03-08Remove empty rules.mk from keymaps (#20056)Joel Challis
2023-01-31Remove usages of config_common.h from config.h files. (#19714)Nick Brassel
2022-12-30Remove useless line continuations (#19399)Ryan
2022-11-29[Keymap] Drashna updates for 0.19 (#19175)Drashna Jaelre
* Fix up bastardkb boards since blackpill support is officially added. * Check for blackpill version, not elite c. * Add checks in chibiOS config since multiple ARM controllers supported. * Rework rules.mk for keymaps to better handle arm vs avr support * Start moving away from `matrix_*_*` functions. * `housekeeping_task_*` instead of `matrix_scan_*` * `keyboard_(pre|post)_init_*` instead of `matrix_init_*` * Add ℂℴmⅈℂ unicode input method. * Clean up unicode code to be more compact and flexible. * Remove/move Pro Micro LED commands to userspace and better filter them * Fixup OLED code * Use newer quantum keycode functions/preprocessors rather than manual bit manipulation * Make unicode mode render much more compact/simple. * Make qmk secrets more self contained * Remove custom implementation of split watchdog
2022-11-22Update use of legacy keycodes (#19120)Joel Challis
2022-10-22Deprecate `VLK_TOG` for `VK_TOGG` (#18807)Ryan
2022-10-16Remove legacy keycodes, part 6 (#18740)Ryan
* `KC_RSHIFT` -> `KC_RSFT` * `KC_RCTRL` -> `KC_RCTL` * `KC_LSHIFT` -> `KC_LSFT` * `KC_LCTRL` -> `KC_LCTL`
2022-10-15Remove legacy keycodes, part 5 (#18710)Ryan
* `KC_SLCK` -> `KC_SCRL` * `KC_NLCK` -> `KC_NUM`
2022-10-15Remove RGBLIGHT_ANIMATION and clean up effect defines for L-Q (#18727)Drashna Jaelre
2022-10-13Remove legacy keycodes, part 4 (#18683)Ryan
* `KC_PGDOWN` -> `KC_PGDN` * `KC_PSCREEN` -> `KC_PSCR` * `KC_SCOLON` -> `KC_SCLN` * `KC_BSLASH` -> `KC_BSLS` * `KC_BSPACE` -> `KC_BSPC`
2022-09-06Remove legacy USE_SERIAL define (#18292)Dasky
* Remove legacy USE_SERIAL define * tidy up missed comments
2022-08-28Switch over MANUFACTURER and PRODUCT to string literals (#18183)Ryan
2022-08-27Clean-up of `#define _ADJUST 16` instances (#18182)James Young
* enum layer_names: 40percentclub/nori default keymap * enum layer_names: ergotravel default keymap * enum layer_names: handwired/atreus50 default keymap * enum layer_names: handwired/ortho5x13 default keymap * enum layer_names: keebio/levinson default keymap * enum layer_names: keebio/nyquist default keymap * enum layer_names: keebio/rorschach default keymap * enum layer_names: keebio/viterbi default keymap * enum layer_names: keebio/wavelet default keymap * enum layer_names: lets_split default keymap * enum layer_names: maple_computing/launchpad reference keymaps Update `default` and `default_rgb` keymaps. * enum layer_names: maple_computing/minidox default keymap * enum layer_names: miniaxe reference keymaps Update `default` and `underglow` keymaps. * enum layer_names: omkbd/ergodash/mini default keymap * enum layer_names: omkbd/ergodash/rev1 default keymap * enum layer_names: orthodox default keymap * enum layer_names: unikeyboard/divergetm2 default keymap * enum layer_names: woodkeys/scarletbandana default keymap * add _Static_assert to keymap_introspection.c
2022-08-21RESET -> QK_BOOT user keymaps (#17940)Joel Challis
2022-05-30[Keymap] Drashna update for post Q2 merge (#17241)Drashna Jaelre
2022-05-15RESET -> QK_BOOT default keymaps (#17037)Joel Challis
2022-04-12[Keyboard] Add userspace pdl and a handwired board (#14199)Daniel Perrett
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2021-12-14[Keymap] Unicode and Pointing Device and Autocorect for drashna keymaps (#15415)Drashna Jaelre
2021-12-14Remove unnecessary backslash-escapes in default keymaps (#15472)Ryan
* Remove unnecessary backslash-escapes in default keymaps * Remove unnecessary backslash-escapes in via keymaps * Remove unnecessary backslash-escapes in default-ish keymaps
2021-10-10[Keymap] orthodox keymap for shaymdev (#14660)Shay Merrill
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-21[Keymap] Drashna's Improve OLEDs and custom Split code (#14063)Drashna Jaelre
* Fill the oleds with right mods * Enable double mods on x32 oleds * Disable forced NKRO * Make oleds fancy only on good MCUs * Overhaul oled display * Further enhance oled, with kitty! * Final oled form * Not working transport * Transport id of woring * Add acceleration * fix button placement for accel macro * Fix accelartion location and behavior * Remove OLED sync code * Fix alignment issue * Remove audio hack * Fix up zima keymap * Add matrix slave scan function and cleanup drashna.h * Clean up user space * Allow userspace sync to be disable-able * Fix weird issue with audio * Fix alignment issue with user split sync * Disable second rgb matrix task * Disable additional animations * Change dynamic keymap settings * Hacky fix for borked corne * Add Blackpill (F411) support to tractyl manuform * remove manual via eeprom reset * Remove all references to rgblight twinkle * Fix issues with config processing
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-26[Keymap] Drashna's Defaults cleanup (#13722)Drashna Jaelre
2021-07-19[Bug] Develop - Change uint32_t to layer_state_t (#13596)Xelus22
* fix sat75 * update uint32_t to layer_state
2021-05-25[Keymap] Update to Drashna keymap and user code (based on develop) (#12936)Drashna Jaelre
2021-02-23Merge remote-tracking branch 'origin/master' into developDrashna Jael're
2021-02-23[Keymap] Drashna Updates - Split+OLED edition (#11968)Drashna Jaelre
2021-02-15Audio system overhaul (#11820)Drashna Jaelre
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit bfe468ef1 start morphing wavetable 474d100b5 refined a bit 208bee10f play_notes working 3e6478b0b start in-place documentation of dac settings 3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right) 73853d651 5 voices at 44.1khz dfb401b95 limit voices to working number 9632b3379 configuration for the ez 6241f3f3b notes working in a new way * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commit splits off the plank example keymap from commit f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both * refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac * refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation pulls three copies of the same code into one function which should improve readability and maintainability :-) * refactoring: move common code of arm and avr implementation into a separate/new file * refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs * refactoring: audio_avr_pwm - replacing function defines with plain register defines aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing * add audio-arm-pwm since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx) this code works on a "BluePill" clone, with an STM32F103C8B * clang-format changes on quantum/audio/* only * audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths * audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup) * refactoring: remove unused file from/for atmel-avr chips * refactoring: remove unused (avr) wavetable file * audio_arm_dac: adapt dac_end callback to changed chibios DAC api the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object. this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count * audio-arm-dac: show a compile-warning on undefined audio-pins Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio_arm_dac: switch from exemplary wavetable generation to sine only sine+triangle+squrare is exemplary, and not realy fit for "production" use 'stairs' are usefull for debugging (hardware, with an oscilloscope) * audio_arm_dac: enable output buffers in the STM32 to drive external loads without any additional ciruitry - external opamps and such * audio: prevent out-of-bounds array access * audio_arm_dac: add output-frequency correcting factor * audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition and do some code-cleanup, refine documentation, ... * audio_arm_pwm: increase pwm frequency for "higher fidelity" on the previous .frequency=100000 higher frequency musical notes came out wrong (frequency measured on a Tektronix TDS2014B) note | freq | arm-pwm C2 | 65.4 | 65.491 C5 | 523.25 | 523.93 C6 | 1046.5 | 1053.38 C7 | 2093 | 2129 C8 | 4186 | 4350.91 with .frequency = 500000 C8 | 4186 | 4204.6 * audio refactoring: remove unused variables * audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second * audio: allow feature selection in rules.mk so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up) or select the "pin alternate" pwm mode, for example on STM32F103 * audio-refactoring: move codeblocks in audio.[ch] into more coherent groups and add some inline documentation * audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm] untangeling the relation between audio.c and the two drivers and adding more documenting comments :-) * audio_avr_pwm: getting it back into working condition, and cleanup+refactor * audio-refactoring: documentation and typo fixes Co-Authored-By: Nick Brassel <nick@tzarc.org> * audio-refactoring: cleanup defines, inludes and remove debug-prints * audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged' * audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers * audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable * audio_chibios_dac: math.h has fmod for this * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface * audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines have the user select a pin by configuration in rules.mk instead of a define in config.h has the advantage of beeing in a common form/pattern across all audio-driver implementations * audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines * audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played * audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency... * audio-refactoring: get 'play_note' working again with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue * audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment) * audio-refactoring: moore documentation and some cleanup * audio-avr-pwm: no fallback on unset AUDIO_PIN this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy * audio-refactoring: untangling terminology: voice->tone the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet) * audio-pwm: allow freq=0 aka a pause/rest in a SONG continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion) * audio-refactoring: audio_advance_note -> audio_advance_state since it does not only affect 'one note', but the internally kept state as a whole * audio-refactoring: untangling terminology: polyphony the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time * audio-chibios-dac: add zero-crossing feature have tones only change/stop when the waveform approaches zero - to avoid audible clicks note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too * audio-refactoring: feature: time-multiplexing of tones on a single output channel this feature was in the original avr-pwm implementation misnomed as "polyphony" with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) ) * audio-avr-pwm: get music-mode working (again) on AVRs with both pwm channels, or either one of the two :-) play_notes worked already - but music_mode uses play_note * audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note * audio-arm-dac: per define selectable sample-luts plus generation script in ./util * audio-refactoring: heh, avr has a MIN... * audio-refactoring: add basic dac audio-driver based on the current/master implementation whereas current=d96380e65496912e0f68e6531565f4b45efd1623 which is the state of things before this whole audio-refactoring branch boiled down to interface with the refactored audio system = removing all redundant state-managing and frequency calculation * audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER * audio-arm-pwm: split the software/hardware implementations into separate files which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained * audio-refactoring: update documentation * audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic * audio-arm-dac: dac_additive: stop the hardware when the last sample completed the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes * audio-refactoring: make function-namespace consistent - all (public) audio functions start with audio_ - also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note * audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_ * audio-arm-dac: update (inline) documentation regarding MAX for sample values * audio-chibios-dac: remove zero-crossing feature didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway * audio-arm-dac: dac_basic: respect the configured sample-rate * audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle like it already does in the avr implementation * audio-refactoring: get VIBRATO working (again) with all drivers (verified with chibios_[dac|pwm]) * audio-arm-dac: zero-crossing feature (Mk II) wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones * audio-refactoring: re-add note-resting -> introduce short_rest inbetween - introduce a short pause/rest between two notes of the same frequency, to separate them audibly - also updating the refactoring comments * audio-refactoring: cleanup refactoring remnants remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system also updates the TODOS * audio-refactoring: reserve negative numbers as unitialized frequencies to allow the valid tone/frequency f=0Hz == rest/pause * audio-refactoring: FIX: first note of melody was missing the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone and some code-indentations/cleanup of related parts * audio-arm-dac: fix hardware init-click due to wron .init= value * audio-refactoring: new conveniance function: audio_play_click which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c * audio-refactoring: use milliseconds instead of seconds for 'click' parameters clicks are supposed to be short, seconds make little sense * audio-refactoring: use timer ticks instead of counters local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway * audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks * audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines * audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace * audio.c: stop notes after new ones have been started avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks * audio.c: bugfix: actually play a pause instead of just idling/stopping which lead the pwm drivers to stop entirely... * audio-arm-pwm: pwm-software: add inverted output new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT * audio-arm-dac: basic: handle piezo configured&wired to both audio pins * audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring * audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps avoids running into issues when the uint32 of the timer overflows * audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST * audio_arm_dac: basic: add missing bracket * audio.c: fix delta calculation was in the wrong place, needs to use the 'last_timestamp' before it was reset * audio-refactoring: buildfix: wrong legacy macro for set_timbre * audio.c: 16bit timerstamps suffice * audio-refactoring: separate includes for AVR and chibios * audio-refactoring: timbre: use uint8 instead of float * audio-refactoring: duration: use uint16 for internal per-tone/note state * audio-refactoring: tonemultiplexing: use uint16 instead of float * audio-arm-dac: additive: set second pin output-low used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE * audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h to be consistent with how other features are handled in QMK * audio-refactoring: buildfix: wrong legacy macro for set_tempo * audio-arm-dac: additive: set second pin output-low -- FIXUP * audio.c: do duration<>ms conversion in uint instead of float on AVR, to save a couple of bytes in the firmware size * audio-refactoring: cleanup eeprom defines/usage for ARM, avr is handled automagically through the avr libc and common_features.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio.h: throw an error if OFF is larger than MAX * audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise. the extra pusles probably matter little, since this is no high-fidelity sound generation :P * audio-arm-dac: additive: move zero-crossing code out of dac_value_generate which is/should be user-overridable == simple, and doing one thing: providing sample values state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback * audio-arm-dac: dac-additive: zero-crossing: ramping up or down after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output * audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause * audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF 1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P * audio-arm-dac: update synth_sample/_wavetable for new pin-defines * audio-arm-dac: default for AUDIO_DAC_VALUE_OFF turned out that zero or max are bad default choices: when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late * audio-arm-dac: additive: use DAC for negative pin instead of PAL, which only allows the pin to be configured as output; LOW or HIGH * audio-arm-dac: more compile-time configuration checks * audio-refactoring: typo fixed * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: add defines for B-pin as primary/only speaker also updates documentation. * audio-refactoring: update documentation with proton-c config.h example * audio-refactoring: move glissando (TODO) to voices.c refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input? * audio-refactoring: cleanup: one round of aspell -c * audio-avr-pwm: back to AUDIO_PIN since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5 so there is no need to deal with separate defines like AUDIO_PIN_B5 * audio-refactoring: add technical documentation audio_driver.md which moves some in-code documentation there * audio-arm-dac: move AUDIO_PIN checks into c-code instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler) * audio-arm-dac: compile-fix: set AUDIO_PIN if unset workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error" * audio-refactoring: document tone-multiplexing feature * audio-refactoring: Apply suggestions from documentation review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-refactoring: Update docs/audio_driver.md * audio-refactoring: docs: fix markdown newlines Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>). Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-arm-dac: additive: fix AUDIO_PIN_ALT handling * audio-arm-pwm: align define naming with other drivers Co-authored-by: Joel Challis <git@zvecr.com> * audio-refactoring: set detault tempo to 120 and add documentation for the override * audio-refactoring: update backlight define checks to new AUDIO_PIN names * audio-refactoring: reworking PWM related defines to be more consistent with other QMK code Co-authored-by: Joel Challis <git@zvecr.com> * audio-arm: have the state-update-timer user configurable defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c) stm32f1 might need to set this to GPTD4, since 6 and 8 are not available * audio-refactoring: PLAY_NOTE_ARRAY was already removed in master * Add prototype for startup * Update chibiOS dac basic to disable pins on stop * Add defaults for Proton C * avoid hanging audio if note is completely missed * Don't redefine pins if they're already defined * Define A4 and A5 for CTPC support * Add license headers to keymap files * Remove figlet? comments * Add DAC config to audio driver docs * Apply suggestions from code review Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Add license header to py files * correct license header * Add JohSchneider's name to modified files AKA credit where credit's due * Set executable permission and change interpeter * Add 'wave' to pip requirements * Improve documentation * Add some settings I missed * Strip AUDIO_DRIVER to parse the name correctly * fix depreciated * Update util/audio_generate_dac_lut.py Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Fix type in clueboard config * Apply suggestions from tzarc Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Johannes <you@example.com> Co-authored-by: JohSchneider <JohSchneider@googlemail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joshua Diamond <josh@windowoffire.com> Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2020-01-26Ensure setPinInput actually sets input high-Z (#6237)Mikkel Jeppesen
* Ensure setPinInput actually sets input high-z * Fixed _PIN_ADDRESS Macro arguments as recommended by vomindoraan * Fixed instances of setInput to use new behavour * Changed kmac matrix to use input with pullups * Update keyboards/gh60/revc/revc.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fixed input state for unselect_rows * fixed merge conflict * Updated all instances of older uses of setPinInput() * Fixed naming mistake Co-authored-by: fauxpark <fauxpark@gmail.com>
2019-11-21[Keyboard] Update default keymaps to use `layer_state_t` (#7444)Drashna Jaelre
* Update default keymaps to use `layer_state_t` * Convert binon32 as get_highest_layer in default keymaps
2019-11-20[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)Drashna Jaelre
* Add Kyria Keymap * Enable all RGBLIGHT Animations for ARM and high capacity AVR * Reduce GNUC version for __has_include * Cleanup Ortho 4x12 Community layout * Update Collide 39 keymap * Cleanup Keymaps * Enable full 30 LEDs for Ergodox * Change EEPROM Load timing * Use RGB Matrix on Planck Rev6 * Use correct keymap swap * Enable everything for ARM * Only enable rgb sleep on avr until crash is fixed * Add additional Kyria keymap config * Overhaul Kyria OLED display * Improve kyria keymap based on usage * Minor tweaks to rules * Update OLED code to truncate properly * Fix RGB Light layer indication * Switch all of biton32 to get_highest_layer function * Fix OLED Keylogger display * Run qmk cformat over all of my user files * Slight tweak to kyria based on usage * Move around LALT_T config * Add comments about base wrappers to keymaps * Another cformat pass * Temp fix for VUSB boards and NKRO * Convert tabs to spaces in rules.mk files * Only enable RGBLight if it's enabled * Add Encoder Flip setting * Update OLED font file
2019-10-28[Keymap] Updating keymaps (#7170)Xyverz
* Added WOW layer * Initial commit for this branch. Still a work in progress. * Added Rorschach keyboard layout. * Simplified keymap Removed the media layer to help simplify things. Also corrected some keymap mistakes in the Qwerty and Colemak layers. * Added ErgoTravel keymap. * reverted to previous layout. * Added Sol keyboard layout. * Minor changes to keymap. * more changes * Added sol graphic by Kagerufu and Cardiactuna * Added colemak layer because I can. * more changes to sol layout * Streamlined Sol layout * minor tweaks to sol layout * further revisions to sol keymap. * Removing deprecated #include statements from my keymaps * Standardizing keymap `include` lines. * Minor change to keymap. Swapped ESC with GRV on all alpha layers. * Tweaks to Atreus62 Keymap Added a layer for FPS RPG Loot Shooters. * Fixed readme.md for Atreus keymap. Replaced "Keymap" with "Layer" in illustrations for continuity's sake * More readme.md clean-up More clarification in the Atreus readme file. * Next verse, same as the first. * Changes to Sol layout Bringing my Sol layout more in line with my other Orthos. * Fixed keymap GUI. Replaced left-hand "RGUI" with "LGUI" on all layers as it should be. * Added ALPS64 keymap * Formatting corrections * fixes to config.h and keymap.c * Fixed errors This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h and removes an stupid comma at the end of each LAYOUT stanza in keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me. * Fixed orthodox keymap config.h file I hope this one fixes the problem. *sigh* * Making suggested changes for PR#6192 Thanks to noroadsleft, fauxpark, and drashna. Still have more work to do, but at least these suggestions have been applied. * Fixing build errors Travis has shown me the error of my ways... * More fixes and corrections Those pesky semicolons... * More Fixes. * Removing unneeded code snippet. * fixed omitted semicolons * Code updates to my keymaps Updating the code for my Iris, Atreus62, and Atreus keymaps. * Fixed Atreus62 Keymap I forgot to add in the aliases for LOWER, RAISE, and ADJUST. * Added userspace Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro * Fixing code that disables LEDs on ProMicros Also tidied up my ErgoTravel keymap. * Moving userspace to new branch Moving my userspace to a new branch for the sake of keeping things clean on the master branch. * Added F13-F15 to Atreus62 Layout. * Update readme.md. * Updated Phantom keymap to current keymap standards * Phantom keymap updates Further updates - tidying and removing cruft. Thank you zvecr on Discord for the help! * Standards Updates Bringing my Kinesis keymap up to current code standards * Adding a readme * Bring GH60 code to standard * Utilizing layouts for 60_ansi and tkl_ansi Moving my GH60 and Phantom keymaps into layouts/community/ * Alps64 layout removal Removing my Alps64 keymap now that I've setup my 60_ansi layout. * Moved Clueboard layout to community/66_ansi. * Additions to 66_ansi config.h * Bringing keymaps up to standard. * More updates to keymaps. * Syntax updates * Revert "Syntax updates" This reverts commit a892b2d9fcc0d4ba8fc22d676d5414120cc2c183. * Moved WIP keymaps Moved my WIP keymaps to my wip_keymaps branch to keep my master clean * Updates requested by noroadsleft * more changes per noroadsleft More fixes as requested by noroadsleft. Further tidy-up and standardization of my keymap code.
2019-10-25Cleanup rules.mk for 32U4 keyboards, N-Q (#7147)fauxpark
2019-09-07[Keymap] Big Drashna code update (#6639)Drashna Jaelre
* Add a quefrency keymap * New Alt-ernate layouts * Enable Per Key Tapping Term to preserve sanity * Use underglow and mod lights for status on Corne * Update the drashna_ms keymap for quefrency * Disable Audio since there isn't enough space * Update KC_MAKE to ues :flash target * Cleanup ergodox layout * Enable i2c support for Iris * Add keymap support for CG_SWAP * Enable RGB Matrix Shutdown mode * enable heatmap * Update gitlab CI to install python3 * Remove game macros These are no longer needed, and haven't been used in ages * Cleanup planck layout * Add RGB Matrix fun and RGB cleanup * Add keycode and config for RGB Matrix idle animations * Clean up rgb idle animation code * Add rgb idle keycode to keymaps * Fix issues with rgb matrix idle animation * Fix some handling for idle animation * Reduce idle animation timeout to 15s to be more reasonable * fix up rgb stuff * Fix isses with rgb functions not being called for matrix * Use custom EEPROM Magic Number so testing is easier * Extend Default Layer macro to support a lot more layers * Fix bjohnson macropad * Adjust KC_MAKE to process mods for more consistent behavior * Fix up rgb stuff on corne * Corne OLED Overhaul * Fixes a number of issues with weirdness. * Fixes issues with keylogger (should be more reliable now) * Modulaize the OLED render sections * Rewrite layer display code * Update URL for Font Editor Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows. * Update polling rate on all keebs * Fix planck ez layout config * Remove macros from Viterbi
2019-07-22[Keymap] Drashna's Feature madness (#6128)Drashna Jaelre
* Fix my Tap Dance issues after I broke them * Cleanup and organization of userspace documentation As well as some additional cleanup of functions due to review of documentation. * Enable Tapdance on Glow and remove more animations * Revert to Eager PR debouncing * Add better check for startup animation * Move where RGB Matrix defines are listed * Limit RGB Matrix max val * Update keyboard for Iris Rev 3 conflicts * Enable encoder support on planck ez * Remove is_master check from corne\'s OLED code * Overhaul OLED screens for my Corne * One last removal * Show RGB valu On both sides * Updates for OLED display info * Fix compile issues for rgb config * Disabled Space Cadet for all drashna keymaps * Fix OLED Screen configs * Minor OLED Tweaks * Revert some Iris changes * Fix song include * Handle MAKE macro for the Corne boards better * Add super hacky-hack for eeconfig initialization * Add audio support for Fractal since Elite Cs support it * Add defines for keycode steps * Add White layout * Update Corne RGB info * Add fun effects to layer indication for RGB Matrix enabled boards * Use proper define for product name detection * Update formatting * Use custom timeout mechanism for OLED timeout * Fix up OLED screen HSV code for new HSV structure * Better handle turning off RGB Matrix when sleeping * Disable MultiSplash Animation * Change Iris back to using serial * Why was RGB disabled?!?!?! * Limit val in rgb_matrix_layer_helper function * Remove EECONFIG setting for RGB matrix
2019-05-06[Keymap] RGB Changes for Drashna Keyboards (#5803)Drashna Jaelre
* Disable a bunch of reactive modes * Enable rgb matrix for Corne Keyboard * Convert CRKBD to rgb matrix * Add Gergo keyboard layout * Make Diablo 3 tap dance better * Add basic support for Planck EZ * Fix RGB Matrix stuff * Fix keycodes for Planck EZ * Update CRKBD OLED stuff * Fix typo for sleep on ergodox glow * Improve my gergo layout * Scrolling OLED key logger! * Change gergo layout * Hnadle unicode keycodes if unicode is disabled * Disable COMMAND/CONSOLE for gergo * Fix right side control * Re-enable LTO for all platforms Since I got updated arm gcc binaries that no longer error out on lto * Update formatting to match newer community standards Poor 2 space * Re-alight startup animation to use new HUE range * Streamline gitlab ci scripts * Disabled Space Cadet * Add support for breathing table * Enable new LTO Option And clean up defines that will now be repeatitive * Remove vscode settings * Additional formatting cleanup of config.h files
2019-04-22[Keymap] Update to Drashna Keymaps (#5594)Drashna Jaelre
* Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed
2019-04-05Remove user keymap changesDrashna Jaelre
2019-04-05Additional cleanup of orthodox files and keymapsDrashna Jaelre
2019-03-19 Cleanup Default Keymaps (#5442)Drashna Jaelre
* Cleanup Default Keymaps to conform to QMK Firmware standards * Minor fixes * Revert some changes
2019-02-17Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154)fauxpark
2019-02-16Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)fauxpark
2019-02-13[Keymap] Update to Drashna keymaps and Userspace (#5122)Drashna Jaelre
* Proper rules include * Minor tweaks * Minor tweaks * Add Desitny 2 Swapped layout support * Add keycode to keylogger * Convert my viterbi keymaps * Fix Orthodox keyboard * Add more default layers * Make default layer keycodes more optimized * Update gitlab CI yaml file * Rev6 Cleanup * Fix KC_MAKE macro * Update GitLab CI yaml file * More GitLab CI changes * One final GitLab CI change * Optimize KC_MAKE * Reformatting of config * Feature creeeeeeep * Planck Rev6 updates
2019-01-27Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)Konstantin Đorđević
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2019-01-26Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
2018-12-31Keymap: Update for Drashna code - Proton C Prep Edition (#4708)Drashna Jaelre
* Make CRKBD keylogger output actually show tap keys * check MT/LT for twinkling * Add ortho 5x12 support for fractal keyboard * Use newer interface for setting pins/ports * Remove custom unicode methods * Reomve unicode input info * Odd rules issue * Redefine REST note to be more pleasing * Properly disable PM LEDs with GPIO commands * Update gitlab CI yaml file * Remove extra mod tap check * Remove initial state on ergodox glow * Rev6 Cleanup * Fix KC_MAKE macro * Update GitLab CI yaml file * More GitLab CI changes * One final GitLab CI change * Remove unneeded unicode support * Optimize KC_MAKE
2018-11-26Update to drashna userspace and keymaps (#4459)Drashna Jaelre
* Fix reversed bool check in layer_state_set * Add Quefrency 65 for a friend * Add Ergodox EZ Glow keymap * Add RGB Matrix Code * Further changes to rgb matrix ErgoDox EZ * Update bjohnson keymaps * Fix CRKBD display * Overhaul to corne keyboard * Narrow scope for keylogger * Minor layout tweaks to Corne Keyboard * additional CRKBD tweaks * Minor tweaks to CRKBD * Add all characters for keylogger * Ergodox EZ Glow overhaul * Fix Ergodox EZ Glow layer colors * Increase Tapping Term for Corne Keyboard * Fix unicode-ish * Revert some changes * Add layer specific lighting effects * Some minor tweaks to ergodox glow config * revert changes to ergodox files * Update Glow readme * Add more tapping term defines * Fix changes * Fix ergodox keymap * Hopefully fix sleeping * Disable layer indications if rgb matrix is disabled * Add support for sleeping and rgb layer change toggle to ergodox ez glow * Make RGB Layer Indication Great Again * Make Unicode Great Again * Remove placeholder define Co-Authored-By: drashna <drashna@live.com> * Remove placeholder define Co-Authored-By: drashna <drashna@live.com> * Remove old EEPROM Reset keycode
2018-10-28Minor updates to keymapsDrashna Jaelre
2018-10-15Update to drashna keymaps and userspace - RGB edition (#4143)Drashna Jaelre
* Fix up userspace after feature merges * Add new macros for keyboard layouts * Keep new layouts in keymap for easy reference * Cleanup layouts * Fix CRKBD wrappers * Fix up comments * Fix spacing in orthodox base layer * ergodox related cleanup * Make KC_MAKE only flash when holding shift * Add option to fast compile boards * Clean up rgb modes to save space * Re-enable Swap Hands on my Iris
2018-08-29Yet another update to drashna keymaps and userspace (#3787)Drashna Jaelre
* Make tap function inline * Use better makefile keyboard detection * Remove Copy-Paste macro * Add F11/F12 to Iris * Minor tweaks to userspace config * Set audio clicky randomness to 1.5 * Set NO_DEBUG to only be set if console is not enabled * Move NO_MUSIC_MODE to userspace config.h * Reduce Ergodox Debounce * Add Planck Light config * Use OSM for ortho 4x12 * Music Mode changes for planck light * Cleanup do to shutdown user and other fixes in Master * Add and use 'shutdown_user' fzunction * Remove global NO_MUSIC_MODE define * Add NO_MUSIC_MODE to individual keymaps * Change layer colors * Remove NO_PRINT and NO_DEBUG from userspace config.h Since these are automatically disabled if the console isn't enabled. * Remove backlight code if backlight isn't enabled * Remove Twinkle from Ergodox * Disable RGB twinkling and enable PSM * Clean up RGB matrix code * Clean up planck light indicators * Clean up tap code * Rules cleanup for ortho 4x12 * Fix up userspace template * Revert "Clean up tap code" This reverts commit 09f64d6d67aa021c3b5ac86a9a739a5ca2b9c1ec. * Organize includes * userspace cleanup * Fix modifier spelling error * Fix userspace rules * Disable Permissive Hold again * Minor clean up * Fix Tap stuff * Viterbi Updates for file size