summaryrefslogtreecommitdiff
path: root/keyboards/kc60
AgeCommit message (Collapse)Author
2023-02-08Migrate `MCU` and `BOOTLOADER` to data-driven (#19529)Ryan
2023-02-07Remove unused Bootmagic row/col defines from config.h (#19761)Ryan
2023-02-06Remove unused `GRAVE_ESC_CTRL_OVERRIDE` from config.h (#19752)Ryan
2023-02-03Debounce defines cleanup (#19742)Ryan
* Clean up `DEBOUNCE` in config.h, 0-9 * Clean up `DEBOUNCE` in config.h, A * Clean up `DEBOUNCE` in config.h, B * Clean up `DEBOUNCE` in config.h, C * Clean up `DEBOUNCE` in config.h, D * Clean up `DEBOUNCE` in config.h, E * Clean up `DEBOUNCE` in config.h, F * Clean up `DEBOUNCE` in config.h, G * Clean up `DEBOUNCE` in config.h, H * Clean up `DEBOUNCE` in config.h, handwired * Clean up `DEBOUNCE` in config.h, I * Clean up `DEBOUNCE` in config.h, J * Clean up `DEBOUNCE` in config.h, K * Clean up `DEBOUNCE` in config.h, L * Clean up `DEBOUNCE` in config.h, M * Clean up `DEBOUNCE` in config.h, N * Clean up `DEBOUNCE` in config.h, O * Clean up `DEBOUNCE` in config.h, P * Clean up `DEBOUNCE` in config.h, Q * Clean up `DEBOUNCE` in config.h, R * Clean up `DEBOUNCE` in config.h, S * Clean up `DEBOUNCE` in config.h, T * Clean up `DEBOUNCE` in config.h, U * Clean up `DEBOUNCE` in config.h, V * Clean up `DEBOUNCE` in config.h, W * Clean up `DEBOUNCE` in config.h, X * Clean up `DEBOUNCE` in config.h, Y * Clean up `DEBOUNCE` in config.h, Z * Remove default debounce from info.json * Migrate non-default debounce to info.json
2023-02-03Remove unused `MATRIX_HAS_GHOST` from config.h (#19726)Ryan
2023-01-30Clean up Force NKRO in config.h (#19718)Ryan
2023-01-31Remove usages of config_common.h from config.h files. (#19714)Nick Brassel
2023-01-10Migrate `LAYOUTS` to data driven (#19541)Ryan
* Migrate `LAYOUTS` to data driven, 0-9 * Migrate `LAYOUTS` to data driven, A * Migrate `LAYOUTS` to data driven, B * Migrate `LAYOUTS` to data driven, C * Migrate `LAYOUTS` to data driven, D * Migrate `LAYOUTS` to data driven, E * Migrate `LAYOUTS` to data driven, F * Migrate `LAYOUTS` to data driven, G * Migrate `LAYOUTS` to data driven, H * Migrate `LAYOUTS` to data driven, handwired * Migrate `LAYOUTS` to data driven, I * Migrate `LAYOUTS` to data driven, J * Migrate `LAYOUTS` to data driven, K * Migrate `LAYOUTS` to data driven, L * Migrate `LAYOUTS` to data driven, M * Migrate `LAYOUTS` to data driven, N * Migrate `LAYOUTS` to data driven, O * Migrate `LAYOUTS` to data driven, P * Migrate `LAYOUTS` to data driven, Q * Migrate `LAYOUTS` to data driven, R * Migrate `LAYOUTS` to data driven, S * Migrate `LAYOUTS` to data driven, T * Migrate `LAYOUTS` to data driven, U * Migrate `LAYOUTS` to data driven, V * Migrate `LAYOUTS` to data driven, W * Migrate `LAYOUTS` to data driven, X * Migrate `LAYOUTS` to data driven, Y * Migrate `LAYOUTS` to data driven, Z
2022-12-30Remove useless line continuations (#19399)Ryan
2022-11-06Reworked backlight keycodes. (#18961)Nick Brassel
Co-authored-by: Ryan <fauxpark@gmail.com>
2022-10-20Remove legacy Grave Escape keycodes (#18787)Ryan
2022-10-19Remove legacy Debug keycode (#18769)Ryan
* `DEBUG` -> `DB_TOGG`, default-ish keymaps * `DEBUG` -> `DB_TOGG`, user keymaps * `DEBUG` -> `DB_TOGG`, community layouts * `DEBUG` -> `DB_TOGG`, userspace * `DEBUG` -> `DB_TOGG`, docs & core
2022-10-15Remove legacy keycodes, part 5 (#18710)Ryan
* `KC_SLCK` -> `KC_SCRL` * `KC_NLCK` -> `KC_NUM`
2022-10-15led_update_kb -> led_update_ports where appropriate (#18716)Jouke Witteveen
Following #14452, less boilerplate is needed to customize indicator led control.
2022-10-15Remove RGBLIGHT_ANIMATION and clean up effect defines for G-K (#18726)Drashna Jaelre
2022-10-13Remove keymaps that still reference legacy macros (#18693)Joel Challis
2022-08-21RESET -> QK_BOOT user keymaps (#17940)Joel Challis
2022-08-06Remove `UNUSED_PINS` (#17931)Nick Brassel
2022-08-03Move keyboard USB IDs and strings to data driven: K (#17846)Ryan
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2022-07-18Update noroadsleft userspace and keymaps (2022-07-18) (#17714)James Young
* kbdfans/kbd75/rev1:noroadsleft - remove LAYOUT_75_ansi_wkl definition * coseyfannitutti/discipline:noroadsleft - change KC_GESC to KC_ESC * update Quantum keycode instances in noroadsleft keymaps - `RESET` -> `QK_BOOT` - `EEP_RST` -> `EE_CLR` - `DEBUG` -> `DB_TOGG` * create and add G_PWD macro
2022-05-15RESET -> QK_BOOT default keymaps (#17037)Joel Challis
2022-03-15Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h ↵Ryan
(#16655)
2021-12-13Update noroadsleft userspace and keymaps (2021-12-13) (#15470)James Young
* remove macroMode functionality * update kbdfans/kbd75/rev1:noroadsleft keymap - replace `_______` instances with `XXXXXXX` on System layer - add line breaks between keymap layers
2021-12-09Tidy up NKRO_ENABLE rules (#15382)Ryan
2021-12-01Tidy up `SLEEP_LED_ENABLE` rules (#15362)Ryan
2021-11-09Merge remote-tracking branch 'upstream/master' into developJames Young
2021-11-09Update noroadsleft userspace and keymaps (2021-11-09) (#15099)James Young
2021-11-05Remove `BOOTMAGIC_ENABLE = lite` option (#15002)James Young
* remove BOOTMAGIC_ENABLE=lite setting * change keyboard BOOTMAGIC_ENABLE rules Edits keyboard-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keyboard BOOTMAGIC_ENABLE inline comments Edits keyboard-level BOOTMAGIC_ENABLE inline comments to "Enable Bootmagic Lite". * change keymap BOOTMAGIC_ENABLE rules Edits keymap-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keymap BOOTMAGIC_ENABLE inline comments Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * change layout/user BOOTMAGIC_ENABLE rules/comments Edits instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * update non-rules.mk BOOTMAGIC_ENABLE references in keyboards/ * remove docs references to Full Bootmagic * convert data-driven Bootmagic Lite instances * remove Bootmagic Lite bodge from data-driven generation * Merge remote-tracking branch 'upstream/develop' into rm/bootmagic-full_q4a * update docs/ja/config_options.md per mtei * update docs/faq_misc.md per mtei Remove remaining Full Bootmagic reference.
2021-10-25Remove unused KEYBOARD_LOCK_ENABLE from rules (#14920)Drashna Jaelre
2021-09-12Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)Ryan
2021-09-12Remove width, height and key_count from info.json (#14274)Ryan
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-06Migrate SHIFT_ESC and RGB `fn_actions` to Grave Escape and RGB keycodes (#13360)Ryan
2021-06-02Update noroadsleft userspace and keymaps (2021-06-02) (#13086)James Young
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-03Update noroadsleft userspace and keymaps (2021-05-03) (#12796)James Young
* Set Dvorak as the standard base layer * Remove unneeded includes * Remove custom handling for Quake 2 Have now rewritten my in-game configuration to use Dvorak mapping instead of QWERTY, which means I don't need any of this stuff. * Clean up comments in KC60 keymap
2021-04-26Update noroadsleft userspace and keymaps (2021-04-26) (#12711)James Young
* Update noroadsleft userspace and keymaps (2021-04-26) - add Discipline keymap - move Emulated Non-US Backslash, Numeric Keypad and F13-F24 code fully to userspace - re-add some custom keycode handling I accidentally deleted - update VRSN keycode - update KC60 and userspace readmes * remove Git readme from kc60 keymap * update kc60:noroadsleft readme Concatenates this readme into one file, and updates the image links.
2021-02-10Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-10[Keymap] add noroadsleft userspace; add and update keymaps (#11686)James Young
2021-01-11Remove unused `action_get_macro()` usages in user files (#11165)Ryan
2020-12-24`qmk fileformat`: only print complaints, and fix some of them (#11278)Ryan
2020-11-02KC60 refactor (#10834)Ryan
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-06-10Add VIA support to KC60 (#9351)James Young
* Add VIA support to KC60 * enable Bootmagic Lite
2020-04-15KC60 Refactor (#8782)James Young
2020-01-30Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)ridingqwerty
2019-11-05[Keymap] Updates to noroadsleft keymap for KC60 (2019-11-05) (#7265)James Young
* Rename layers_keymap to layer_names * Update Escape and Left Control keys - change KC_GESC to KC_ESC - change KC_LCTL to MT(MOD_LCTL, KC_GRV) * Disable features I don't use Makes the firmware lean. Why? Because I can. :D * Update the readme files * Add KC_F13 through KC_F24 emulation ... and update the readme files accordingly. * Update rules/config - Swap EXTRAFLAGS for LINK_TIME_OPTIMIZATION_ENABLE - remove NO_ACTION_MACRO and NO_ACTION_FUNCTION - Re-enable COMMAND * concatenate full-length and short layer names * enable dynamic macros * update readme files
2019-10-21Cleanup rules.mk for 32U4 keyboards, I-K (#7097)fauxpark
* Cleanup rules.mk for 32U4 keyboards, I-K * Clean up ivy rules.mk
2019-08-30Migrate ACTION_BACKLIGHT_* to BL_* (#6299)fauxpark
* Branch point for 2019 Aug 30 Breaking Change * LUFA USB descriptor cleanup (#4871) * Fix indentation * Fix braces * Expand descriptor headers * Align descriptor elements * Nicer formatting * Tidy up preprocessor statements * Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418 * Tidy up comments * Tweak ordering of HID report elements (no functional changes) * We don't need all of these newlines * Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense * Ask nicely * Add some more comments * Change indentation back to 4 spaces * Add changelog entry * Language Keymap extras backport from ZSA fork (#6198) * Swedish extra keymap refactor * Fix swedish $ sign definition (#81) * Fix br abnt2 keymap compilation error * Add PR changelog doc * Update PR6198.md * Enforce clang-format (#6293) * Enforce clang-format on commit for core files * forgot about tests * Migrate ACTION_LAYER_MOMENTARYs to MO() (#5176) * Migrate ACTION_LAYER_MOMENTARYs to MO() * Add changelog entry * Update docs/ChangeLog/20190830/PR5176.md Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com> * Migrate ACTION_BACKLIGHT_* to BL_* * Add changelog * Update docs/ChangeLog/20190830/PR6299.md Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
2019-07-16Remove commented out MCUs in rules.mk (#5884)fauxpark
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:27:36 +0000