summaryrefslogtreecommitdiff
path: root/keyboards/jj40
AgeCommit message (Collapse)Author
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-27Remove legacy BACKLIGHT_CUSTOM_DRIVER option (#13731)Joel Challis
2021-07-06`keymap_extras`: Remove deprecated defines (#12949)Ryan
2021-05-11Remove KEYMAP and LAYOUT_kc (#12160)Zach White
* alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc
2021-04-12Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172)James Young
2021-02-09Remove FAUXCLICKY feature (deprecated) (#11829)Drashna Jaelre
2021-01-30Merge remote-tracking branch 'origin/master' into developZach White
2021-01-30Add a <FEATURE>_SUPPORTED flag (#9058)Zach White
* Initial attempt at allowing keyboards to indicate what features they do not support * try to use a for loop instead * Update disable_features.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * add a few more features * remove my test fixture * disable things that make all:all suggested" Co-authored-by: Zach White <skullydazed@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-01-11Remove unused `action_get_macro()` usages in user files (#11165)Ryan
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-10-25Rename keyboard-level readmes to lower-case (#10759)Erovia
This is the recommendation in the [PR Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it will make working with them easier in the CLI/API/etc.
2020-09-11Add VIA support for JJ40 (#10263)Alvaro Muente
* via support * Removing backspaces from jj40 keymap.c * Updating jj40/via/rules.mk
2020-09-06[Keyboard] Update JJ40 VID and PID (#10215)Alvaro Muente
Co-authored-by: Alvaro <afmuente@outlook.com>
2020-07-09Create ajp10304 userspace and ortho_4x12 layout. (#9304)ajp10304
2020-05-07jj28 (jj40 SuperMicro) update (#8885)Stefano
* jj28 (jj40 SuperMicro) update * Update keyboards/jj40/keymaps/stevexyz/config.h Co-Authored-By: Joel Challis <git@zvecr.com> * removed jpegs * Update keyboards/jj40/keymaps/stevexyz/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/jj40/keymaps/stevexyz/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/jj40/keymaps/stevexyz/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: stevexyz <warste@removethisandleavegoogle.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-31V-USB: Consolidate usbconfig.h's into a single file (#8584)Ryan
2020-03-28V-USB: Use structs for USB descriptors (#8572)Ryan
* V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass
2020-03-26V-USB: Use manufacturer and product strings from config.h (#7797)Ryan
* V-USB: Use manufacturer and product strings from config.h * Update board configs
2020-03-09Remove NO_UART defines from config.h for V-USB boards (#8351)Ryan
2020-01-30Remove filesize changes from default-ish rules.mk files, sans handwired (#8040)ridingqwerty
2020-01-18Remove custom backlight code for PS2AVRGB boards (#7775)fauxpark
* Remove custom backlight code for PS2AVRGB boards * Remove custom driver setting * BACKLIGHT_BREATHING goes in config.h, not here * Don't need to include backlight.c again here either * Turn on backlight for Canoe * Disable console on a few boards due to oversize
2020-01-02Remove custom matrix from PS2AVRGB boards (#7396)fauxpark
* Remove custom matrix from PS2AVRGB boards * Add custom backlight.c to SRC for bminiex, for now * Add missing DIODE_DIRECTIONs
2019-11-23[Keyboard] Update ATmega32A readme files to match template (#7462)Joel Challis
* Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review
2019-11-21[Keyboard] Update default keymaps to use `layer_state_t` (#7444)Drashna Jaelre
* Update default keymaps to use `layer_state_t` * Convert binon32 as get_highest_layer in default keymaps
2019-11-15Set device version from config.h for V-USB boards (#7316)fauxpark
2019-11-15Add support for configurable polling interval and power usage o… (#7336)fauxpark
* Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now
2019-10-29 Refactor ps2avrgb i2c ws2812 to core (#7183)Joel Challis
* Refactor ps2avrgb i2c ws2812 to core * Refactor jj40 to use ws2812 i2c driver * Refactor ps2avrgb template to use ws2812 i2c driver * Add ws2812 stub files * clang-format and driver config * Add ws2812 driver docs * Fix default config values * Update tmk_core/protocol/vusb/main.c Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-09-20Cleanup rules.mk for 32A and 328P keyboards (#6767)fauxpark
2019-08-24[Keymap] a keymap to "transform" a jj40 info a simil Alpha28, to enjoy its ↵Stefano
simplicity and power (#6599)
2019-08-08[Keymap] removes gamelayer, finally got rgb working (#5817)Florian B
* removes gamelayer, finally got rgb working * lowercasing readme * changed to layout_ortho_4x12 * rules.mk: Removed BACKLIGHT_CUSTOM_DRIVER
2019-06-07[Keymap] Update jj40:cockpit keymap (#6089)Domantas Petrauskas
* Add JJ40 Cockpit keymap * Fix lower layer symbols * Improve documentation JJ40 Cockpit * Add screen backlight controls jj40:cockpit * Update docs jj40:cockpit
2019-06-06Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)Drashna Jaelre
2019-04-08[Keyboard] Refactor jj40 to current standards (#5574)zvecr
* Refactor jj40 in line with current ps2avrgb template * Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID * Add backlight pwm bodge till #4324 lands * Increase planck keymap compatibility
2019-03-14Align use of atmega32a program script (#5259)zvecr
* Remove duplicate 'program' files and refactor to use atmega32a_program.py * Update readme references from 'program' to 'atmega32a_program.py'
2019-02-18 Relocate usb_detach to utils (#5121)zvecr
* Relocate usb_detach to utils * Relocate usb_detach to utils - fix up files after move
2019-02-17Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154)fauxpark
2019-01-30[Keyboard] Jj40 doc (#4914)wanleg
* Update README.md * Update README.md * Update README.md * Update README.md
2019-01-26Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
2019-01-13Modified URLs to point to new locationsJeremy Bernhardt
2019-01-04Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)noroadsleft
* Remove QUANTUM_DIR code blocks from keyboard rules This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect entire keyboards. * remove QUANTUM_DIR code blocks from rules for default keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect default keymaps. * remove QUANTUM_DIR code blocks from rules for user keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect "user" keymaps. (It's actually any keymap that isn't named `default`.) * remove QUANTUM_DIR code blocks from rules for community layouts This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for community layouts. * remove QUANTUM_DIR code blocks from rules for userspaces This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for userspaces.
2018-11-27Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319)Konstantin Đorđević
2018-10-22Keyboard: JJ40 Refactor and Configurator support (#3197)noroadsleft
* Deleted LAYOUTS = planck_grid from rules.mk * Refactor * Configurator support * Fixed offset layout matrix macro * Readded LAYOUT_kc_ortho_4x12 matrix alias * Refactor: rename LAYOUT_offset_right macro as LAYOUT_planck_1x2uR
2018-10-15Keymap: add JJ40 Skewwhiffy layout (#4135)Kenny Hung
2018-10-11Keymap: Undo my backlight workaround (#4122)Oscillope
* Update jj40 keymap for easier pgup/pgdn * Backlight problem fixed by a previous commit
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-04Keymap: Added a keymap like a JIS keyboard for JJ 40. (#3847)marksard
2018-07-23ps2avrgb: fix incorrect avr ports specified (for numlock and capslock LEDs) ↵Kenneth Aloysius
(#3453) * Add M6-A keymap * Update XD60 keymap * Update XD60 keymap readme * Update JJ40 and Let's Split keymaps * Add readme for M6-A * Fix typo, update JJ40 README * Update jj40 readme * Cleanup jj40 keymap * Revert Let's Split QWERTY layer to default before #2010 * Update numpad layers * Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer * Keep ASCII art consistent with keymap * Staryu: initial port * Add personal keymap * Added and updated READMEs * Fix: default keymap for staryu * Rudimentary backlight support. * Enabled mousekeys for default keymap * use QMK_KEYBOARD_H and LAYOUT * Update readme.md for NIU mini: flash using avrdude * Fix missing linebreaks for Staryu README * Update readme.md * Update PS2AVRGB boards with new matrix.c * Update canoe matrix.c; untested * Fix canoe.c for building (needs matrix_scan_user and matrix_init_user) * Add personal Iris keymap * Update keymap * Update keymap * Update keymap, disable backlighting and underglow * Move PrintScreen button * Add README * Update personal keymaps * Add INS key * Limit USB max power consumption, change Fn to MENU * Remove Numpad layer (easy to accidentally toggle) * Fix backlighting for ps2avrgb * Update comments to refer to actual pin naming * Possible fix for xyverz ortho keymap: define RGBLED_NUM * Make led_set_user in backlight.c overridable * Add changes to address points raised in code review, untested (don't have build env right now)
2018-07-14AJP10304 Atreus 50 layout (#3403)ajp10304
2018-06-28added a description how to flash jj40 in windows (#3247)sgugler
2018-06-12Fix jj40 capslock and minor keymap updates (#3168)Oscillope
* Adjust TAPPING_TERM to make accessing the nav layer easier * JJ40: Add RESET key to lower layer. * Disable all lock LEDs on "oscillope" keymap. I'm not 100% sure why yet, but attempting to turn on a lock LED on my v1 JJ40 PCB causes the PCB to become unresponsive. The easy fix is to just disable all of the lock LEDs, since I don't have any LEDs on my keyboard anyway. Many thanks to u/wanleg on Reddit for suggesting this fix: https://www.reddit.com/r/olkb/comments/8en8f1/strange_caps_lock_behavior/e06kcaf/
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 12:57:13 +0000