summaryrefslogtreecommitdiff
path: root/keyboards/helix/rev2
AgeCommit message (Collapse)Author
2022-03-21[Keyboard] add oled_task_kb() into keyboards/helix/rev2/rev2.c (#16697)Takeshi ISHII
2022-03-15Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h ↵Ryan
(#16655)
2022-03-13helix:edvorakjp keymap change to use split_common (#16532)Takeshi ISHII
2022-03-10Remove `matrix_key_count()` (#16603)Ryan
* Remove `matrix_key_count()` * Remove `matrix_bitpop()`
2022-03-06[Keymap] Change helix:five_rows_jis keymap to use split_common (#16538)Takeshi ISHII
2022-03-06[Keymap] Change helix:fraanrosi keymap to use split_common (#16533)Takeshi ISHII
2022-03-06Change helix:five_rows keymap to use QMK standerd oled driver (#16539)Takeshi ISHII
2022-03-03Fix helix/rev2 not working properly when using split_common. (#16512)Takeshi ISHII
When helix/rev2 was using split_common, it didn't work properly and I couldn't type on the right hand side. The cause is that the following code, added in 0.16.0 to `quantum/keyboard.c`, does not include `quantum/split_common/split_util.h` but instead includes `keyboards/helix/rev2/split_util.h`. Therefore, `split_pre_init()/split_post_init()` in `quantum/split_common/split_util.c` was not called. ```c #ifdef SPLIT_KEYBOARD # include "split_util.h" #endif ```
2022-03-03Fix mistakes in the include path in `helix/rev2/local_features.mk`. (#16507)Takeshi ISHII
```diff --- a/keyboards/helix/rev2/local_features.mk +++ b/keyboards/helix/rev2/local_features.mk @@ -6,7 +6,7 @@ # KEYBOARD_LOCAL_FEATURES_MK := --include $(strip $(HELIX_TOP_DIR)/pico/override_helix_options.mk) ## File ded icated to maintenance +-include $(strip $(HELIX_TOP_DIR)/rev2/override_helix_options.mk) ## File dedicated to maintenance ```
2022-03-02Change 'helix/rev2:default' setting to use split_common (#16432)Takeshi ISHII
* add licenses message to helix/rev2 files * Minimize the processing of helix/rev2/local_features.mk * Changed helix/rev2 default setting to use split_common * fix helix/rev2:edvorakjp build error * Remove unnecessary '#include' from keymap.c * helix keymaps Workaround for build errors. five_rows_jis, fraanrosi, froggy, froggy_106, yshrsmz * Revert "fix helix/rev2:edvorakjp build error" This reverts commit 731dbbe15155b3efe2ff9f5ad61c7d0cf529e837. Separated into a single PR #16433. * Revert "Changed helix/rev2 default setting to use split_common" This reverts commit e76dbd7762e06e0781ee004213878b1a5029fa98. * add 'SPLIT_*_STATE_ENABLE' into helix/rev2/config.h * Revert "helix keymaps Workaround for build errors. five_rows_jis, fraanrosi, froggy, froggy_106, yshrsmz" This reverts commit 9b316c1c6a532f908f2ac430233089797ce7c794. * change helix:default to use split_common * change helix:five_rows to use split_common * add comment into helix/rev2/rules.mk * change helix:led_test to use split_common
2022-02-27fix helix/rev2:edvorakjp build error (#16433)Takeshi ISHII
'helix/rev2/keymaps/edvorakjp' was no longer buildable due to changes made by #14864. The reason is that the prototype of `oled_task_user()` was changed in keymaps/edvorakjp/oled.c, but keymaps/edvorakjp/oled.h was not changed. Therefore, I modified the prototype in keymaps/edvorakjp/oled.h.
2022-02-16Bodge for helix build failures (#16376)Joel Challis
2021-12-14Merge remote-tracking branch 'origin/master' into developDrashna Jael're
2021-12-14Remove unnecessary backslash-escapes in default keymaps (#15472)Ryan
* Remove unnecessary backslash-escapes in default keymaps * Remove unnecessary backslash-escapes in via keymaps * Remove unnecessary backslash-escapes in default-ish keymaps
2021-12-08Merge remote-tracking branch 'origin/master' into developDrashna Jael're
2021-12-07Remove references to Makefile in keyboard-level rules.mk (#15427)Ryan
2021-11-29[Core] Remove matrix_is_modified() and debounce_is_active() (#15349)Stefan Kerkmann
2021-11-02[Core] Change OLED task function to be boolean (#14864)Drashna Jaelre
* [Core] Add kb level callbacks to OLED driver * Update keyboards and keymaps * Update docs * Update userspace configs * Add fix for my keymap ... * update lefty
2021-09-17Merge remote-tracking branch 'origin/master' into developDrashna Jael're
2021-09-16[Keymap] Update Helix:five_rows OLED code (#14427)Takeshi ISHII
* Stop using snprintf() in keymaps/five_rows/oled_display.c. The binary size becomes 1350 bytes smaller. make HELIX=verbose,core-oled helix/rev2/sc:five_rows (104 bytes over) -> (95%, 1256 bytes free) make helix/rev3_5rows:five_rows (528 bytes over) -> (97%, 830 bytes free) * add matrix scan rate display to OLED for keymaps/five_rows * add matrix_output_unselect_delay.c to helix keymaps/five_rows * add GPLv2 header * apply review comment
2021-09-12Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-09-12Remove width, height and key_count from info.json (#14274)Ryan
2021-09-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-09-05Remove empty override functions (#14312)Ryan
* Remove empty override functions, 0-9 * Remove empty override functions, A-D * Remove empty override functions, E-H * Remove empty override functions, handwired * Remove empty override functions, I-L * Remove empty override functions, M-P * Remove empty override functions, Q-T * Remove empty override functions, U-Z
2021-09-01Change keyboard level include guards to `pragma once` (#14248)Ryan
* Change keyboard level include guards to `pragma once` And clean up a lot of layout macros * Oops * Remove dangling endif
2021-08-31[Keyboard] Helix use `post_rules.mk` (#14216)Takeshi ISHII
* Helix/pico use post_rules.mk insted of local_features.mk Tested with the following procedure. ``` git checkout 77a93fec79 (qmk/develop) make clean make helix/pico:all:check-md5 make helix/pico/sc:all:check-md5 git checkout helix_use_post_rules.mk make clean make helix/pico:all:check-md5 make helix/pico/sc:all:check-md5 ``` * Helix/rev2 use post_rules.mk Tested with the following procedure. ``` git checkout 77a93fec79 (qmk/develop) make clean make helix/pico:all:check-md5 make helix/pico/sc:all:check-md5 make helix/rev2:all:check-md5 make helix/rev2/sc:all:check-md5 git checkout helix_use_post_rules.mk make clean make helix/pico:all:check-md5 make helix/pico/sc:all:check-md5 make helix/rev2:all:check-md5 make helix/rev2/sc:all:check-md5 ```
2021-08-29[Keyboard] fix compile error `make helix/rev2/sc:all` (#14214)Takeshi ISHII
2021-08-24[Core] Refactor OLED to allow easy addition of other types (#13454)Xelus22
* add docs * core changes * update keyboards to new OLED * updated users to new OLED * update layouts to new OLED * fixup docs * drashna's suggestion * fix up docs * new keyboards with oled * core split changes * remaining keyboard files * Fix The Helix keyboards oled options * reflect develop Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-19[Keymap] fix helix:fraanrosi compile error caused by #13677. (#14061)Takeshi ISHII
I'm against using RGBLIGHT_ANIMATIONS because this happens. See also #8688.
2021-07-11Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-11Fixed the Helix keymap 'fraanrosi' compile issues (#13514)Takeshi ISHII
According to `helix/rev2/keymaps/fraanrosi/readme.md`, this keymap should be compiled with the following command: ``` make helix/rev2/under:fraanrosi ``` Therefore, when compiling all helix keymaps with the following command, an error occurs when compiling `fraanrosi`. ``` make helix:all ``` Therefore, add `LED_UNDERGLOW_ENABLE = yes` to `keymaps/fraanrosi/rules.mk` to suppress the error.
2021-07-06`keymap_extras`: Remove deprecated defines (#12949)Ryan
2021-06-18Extensible split data sync (#11930)Nick Brassel
* Extensible split data sync capability through transactions. - Split common transport has been split up between the transport layer and data layer. - Split "transactions" model used, with convergence between I2C and serial data definitions. - Slave matrix "generation count" is used to determine if the full slave matrix needs to be retrieved. - Encoders get the same "generation count" treatment. - All other blocks of data are synchronised when a change is detected. - All transmissions have a globally-configurable deadline before a transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms). - Added atomicity for all core-synced data, preventing partial updates - Added retries to AVR i2c_master's i2c_start, to minimise the number of failed transactions when interrupts are disabled on the slave due to atomicity checks. - Some keyboards have had slight modifications made in order to ensure that they still build due to firmware size restrictions. * Fixup LED_MATRIX compile. * Parameterise ERROR_DISCONNECT_COUNT.
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-11Remove KEYMAP and LAYOUT_kc (#12160)Zach White
* alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc
2021-04-09[Keymap] Remove LAYOUT_kc macros from edvorakjp keymaps (#12217)Ryo Maeda
2021-04-04[Keymap] cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows (#12259)Takeshi ISHII
* cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows * Made the layout data easier to read. * helix/rev2/keymaps/five_rows/keymap.c * helix/rev3_5rows/keymaps/five_rows/keymap.c * The following two were made the same. * keymaps/five_rows/config.h * keymaps/five_rows/oled_display.c The binary of the compilation result has not changed. * update keyboards/helix/rev2/keymaps/five_rows/rules.mk KEYBOARD_LOCAL_FEATURES_MK was moved to the end. * add '#define DISABLE_SYNC_TIMER' into helix/rev3_5rows/keymaps/five_rows/config.h The sync timer features worsen the matrix scan rate of the Helix keyboard. I'm not sure if it makes sense to have sync timer features enabled on the Helix keyboard. So in my keymap I disable this.
2021-02-19Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-19[Keymap] Adding fraanrosi keymap. (changes applied) (#11862)Franco Rosi
* Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) * Se añade Keymap. * Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. * Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. * Update keymap.md * Rename keymap.md to readme.md * Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. * -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. * Update readme.md * Update readme.md * Update readme.md * adding helix-keyboard.png * Update readme.md * -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). * Cambios en el Keymap para mayor comodidad del uso del mouse. * Update readme.md * Update readme.md * -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. * Update readme.md * Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". * Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. * Update Readme.mp * Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. * Update readme.md * Clean up, organization, indent fixes * Update readme.md * Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) * Se añade Keymap. * Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. * Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. * Update keymap.md * Rename keymap.md to readme.md * Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. * -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. * Update readme.md * Update readme.md * Update readme.md * adding helix-keyboard.png * Update readme.md * -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). * Cambios en el Keymap para mayor comodidad del uso del mouse. * Update readme.md * Update readme.md * -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. * Update readme.md * Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". * Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. * Update Readme.mp * Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. * Update readme.md * Update readme.md * Clean up, organization, indent fixes * Update readme.md Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) Se añade Keymap. Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. Update keymap.md Rename keymap.md to readme.md Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. Update readme.md Update readme.md Update readme.md adding helix-keyboard.png Update readme.md -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). Cambios en el Keymap para mayor comodidad del uso del mouse. Update readme.md Update readme.md -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. Update readme.md Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. Update Readme.mp Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. Update readme.md Clean up, organization, indent fixes Update readme.md * Changes and corrections were made to Pull Request. * Since the last change, readme.md and comment in keymap.c were to be updated.
2021-02-06Remove legacy print backward compatiblitly (#11805)Joel Challis
* Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes
2021-01-20Remove `DESCRIPTION`, H-J (#11616)Ryan
2020-12-26[Keymap] update rules.mk and config.h of `helix/rev2:five_rows` (#11302)Takeshi ISHII
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk: oled selection, led animation selection * add OLED_UPDATE_INTERVAL support into keyboards/helix/rev2/keymaps/five_rows/oled_display.c Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks. * Add 'HELIX=debug/no-debug' option into 'helix/rev2/keymaps/five_rows/rules.mk'
2020-12-21Initial list of keyboards to exclude from CI (#11213)Zach White
2020-12-20[Keymap] fix keyboards/helix/rev2/keymaps/default/oled_display.c (#11228)Takeshi ISHII
Fixed the OLED display on the right side as it was showing some garbage. 右側のOLEDディスプレイにゴミが表示されていたのを修正しました。
2020-12-16Normalise include statements in keyboard code (#11185)Ryan
2020-12-15[Keymap] Helix default keymap oled update (#11152)MakotoKurauchi
* update keyboards/helix/rev2/local_features.mk - Improved parsing of the `HELIX =` option * add 'is_mac_mode()' into keyboards/helix/rev2/rev2.c * update helix/rev2/keymaps/default/keymap.c: use rgblight query functions * Makes the OLED driver used by the helix:default keymap switchable. * use TOP/drivers/oled/oled_driver.c `make helix:default` or `make OLED_SELECT=core helix:default` * use helix/local_drivers/ssd1306.c `make OLED_SELECT=local helix:default` * Separated the OLED related code from keymap.c and moved it to oled_display.c. * Change the 'led_test' keymap to follow the changes in the 'default' keymap. * update helix/rev2/keymaps/default/oled_display.c * add '#define OLED_UPDATE_INTERVAL 50' into keyboards/helix/rev2/config.h * Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks * add readme.md for helix/rev2 * Apply drashna's suggestions to rev2.c. * Apply drashna's suggestions to rev3_4rows.c, rev3_5rows.c. Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-17[Keymap] clean up helix:five_rows keymap (#10866)Takeshi ISHII
* Makes the OLED driver used by the helix:five_rows keymap switchable. * use TOP/drivers/oled/oled_driver.c `make HELIX=stdole helix:five_rows` * use helix/local_drivers/ssd1306.c `make HELIX=oled helix:five_rows` * Separated the OLED related code from keymap.c and moved it to oled_display.c. * scan rate without OLED * make HELIX=verbose,dispoff,scan helix/rev2:five_rows use Helix original code text data bss dec hex filename 18880 58 235 19173 4ae5 .build/helix_rev2_five_rows.elf matrix scan frequency: 1590 * make HELIX=verbose,dispoff,scan,sc helix/rev2:five_rows use split_common code text data bss dec hex filename 18554 40 231 18825 4989 .build/helix_rev2_five_rows.elf matrix scan frequency: 1202 * scan rate with helix/local_drivers/ssd1306.c * make HELIX=verbose,dispoff,scan,oled helix/rev2:five_rows use Helix original code text data bss dec hex filename 24048 196 342 24586 600a .build/helix_rev2_five_rows.elf matrix scan frequency: 739 * make HELIX=verbose,dispoff,scan,sc,oled helix/rev2:five_rows use split_common code text data bss dec hex filename 23750 176 338 24264 5ec8 .build/helix_rev2_five_rows.elf matrix scan frequency: 642 * scan rate with drivers/oled/oled_driver.c * make HELIX=verbose,dispoff,scan,stdole helix/rev2:five_rows use Helix original code text data bss dec hex filename 24590 210 798 25598 63fe .build/helix_rev2_five_rows.elf matrix scan frequency: 293 * make HELIX=verbose,dispoff,scan,sc,stdole helix/rev2:five_rows use split_common code text data bss dec hex filename 24290 190 794 25274 62ba .build/helix_rev2_five_rows.elf matrix scan frequency: 277 * clean up helix/rev2/keymaps/five_rows/keymap.c * update five_rows/oled_display.c * update helix/rev2/keymaps/five_rows/keymap.c: remove LAYOUT_kc() * Ported the keymap from helix/rev2:five_rows to helix/rev3_5rows:five_rows. * update five_rows/oled_display.c * add License comment
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-06-25Fix error_log complaint about Helix boards (#9528)Ryan