summaryrefslogtreecommitdiff
path: root/keyboards/ergotravel/keymaps
AgeCommit message (Collapse)Author
2023-12-12Rename `RGBLED_NUM` -> `RGBLIGHT_LED_COUNT` (#22570)Ryan
2023-11-27Remove userspace keymaps (#22544)Joel Challis
2023-03-08Remove empty rules.mk from keymaps (#20056)Joel Challis
2022-10-16Remove legacy keycodes, part 6 (#18740)Ryan
* `KC_RSHIFT` -> `KC_RSFT` * `KC_RCTRL` -> `KC_RCTL` * `KC_LSHIFT` -> `KC_LSFT` * `KC_LCTRL` -> `KC_LCTL`
2022-10-15Remove RGBLIGHT_ANIMTION and clean up effect defines for 0-F (#18725)Drashna Jaelre
2022-09-06Remove legacy USE_SERIAL define (#18292)Dasky
* Remove legacy USE_SERIAL define * tidy up missed comments
2022-08-27Clean-up of `#define _ADJUST 16` instances (#18182)James Young
* enum layer_names: 40percentclub/nori default keymap * enum layer_names: ergotravel default keymap * enum layer_names: handwired/atreus50 default keymap * enum layer_names: handwired/ortho5x13 default keymap * enum layer_names: keebio/levinson default keymap * enum layer_names: keebio/nyquist default keymap * enum layer_names: keebio/rorschach default keymap * enum layer_names: keebio/viterbi default keymap * enum layer_names: keebio/wavelet default keymap * enum layer_names: lets_split default keymap * enum layer_names: maple_computing/launchpad reference keymaps Update `default` and `default_rgb` keymaps. * enum layer_names: maple_computing/minidox default keymap * enum layer_names: miniaxe reference keymaps Update `default` and `underglow` keymaps. * enum layer_names: omkbd/ergodash/mini default keymap * enum layer_names: omkbd/ergodash/rev1 default keymap * enum layer_names: orthodox default keymap * enum layer_names: unikeyboard/divergetm2 default keymap * enum layer_names: woodkeys/scarletbandana default keymap * add _Static_assert to keymap_introspection.c
2022-08-21RESET -> QK_BOOT user keymaps (#17940)Joel Challis
2022-07-02[Keymap] Update Miryoku (#16482)Manna Harbour
2022-05-15RESET -> QK_BOOT default keymaps (#17037)Joel Challis
2021-12-14Remove unnecessary backslash-escapes in default keymaps (#15472)Ryan
* Remove unnecessary backslash-escapes in default keymaps * Remove unnecessary backslash-escapes in via keymaps * Remove unnecessary backslash-escapes in default-ish keymaps
2021-11-05Remove `BOOTMAGIC_ENABLE = lite` option (#15002)James Young
* remove BOOTMAGIC_ENABLE=lite setting * change keyboard BOOTMAGIC_ENABLE rules Edits keyboard-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keyboard BOOTMAGIC_ENABLE inline comments Edits keyboard-level BOOTMAGIC_ENABLE inline comments to "Enable Bootmagic Lite". * change keymap BOOTMAGIC_ENABLE rules Edits keymap-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keymap BOOTMAGIC_ENABLE inline comments Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * change layout/user BOOTMAGIC_ENABLE rules/comments Edits instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * update non-rules.mk BOOTMAGIC_ENABLE references in keyboards/ * remove docs references to Full Bootmagic * convert data-driven Bootmagic Lite instances * remove Bootmagic Lite bodge from data-driven generation * Merge remote-tracking branch 'upstream/develop' into rm/bootmagic-full_q4a * update docs/ja/config_options.md per mtei * update docs/faq_misc.md per mtei Remove remaining Full Bootmagic reference.
2021-10-15[Keymap] Update Miryoku (#14827)Manna Harbour
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-03[Keymap] Update Miryoku (#13307)Manna Harbour
Fix reddit link Duplicate open parenthesis next to close parenthesis on NSSL Add customisation instructions Add lily58 Add gergo Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com> Clean up LAYOUT macro formatting Add alternative vi-style navigation layout Add kyria Add minidox Change order of keyboards Add iris Expand TOC Re-order userspace subheadings Add atreus Add customisation section Add split_3x5_3 and split_3x6_3 layouts Add for_science Fix wrong paths in keyboard config.h and keymap.c headings Fix keyboard ordering Fix blank lines around headings Add compatibility with new org-mode version. Remove keyboards/crkbd now covered by layouts/split_3x6_3 Add Halmak Alphabetise alternative alpha arrangements Move build options out of base layer alphas headings Add list of keyboards supporting split_3x5_3 layout Enable Auto Shift and Retro Shift Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping) Change kyria thumb key mapping Add planck_mit layout Remove alternative bottom row support from ortho_4x12 Remove minidox - Covered by split_3x5_3 layout Add moonlander Remove KC_ macros Add 60_ansi layout Add ortho_5x15 layout Closes manna-harbour/qmk_firmware#5 Co-authored-by: Rob <rob@debank.tv> Fix typo (manna-harbour/qmk_firmware#7) Author: sonnius <sonnius@users.noreply.github.com> Add redox_w (manna-harbour/qmk_firmware#8) Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Add AUTO_SHIFT_NO_SETUP to reduce firmware size Update image paths Add instructions to checkout development branch Add kyria extended thumbs option, change default, add KLE Change clipboard keys - Change order to be mirror of windows bindings - Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster bindings for Undo and Redo - Add alternative bindings - Fun Cluster (original miryoku bindings) - Mac - Windows - Change prefix for local macros from X_ to U_ Disable Retro Shift, enable Auto Shift for non-alphas Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)" Add Experimental Features section Update miryoku image link Update cover image link Add dactyl_manuform/4x5 Add cutomisation examples Add https to remote example Fix dactyl_manuform/4x5 subset mapping Add extended thumbs to ortho_4x12 Update Colemak Mod-DH naming Closes manna-harbour/qmk_firmware#13 Add dactyl_manuform/5x6 Resolves manna-harbour/qmk_firmware#14 Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com> Add note on FORCE_LAYOUT - Needed to use EXTENDED_THUMBS on planck Add parent directories to keyboard headings and re-order Add keyboardio/atreus Resolves manna-harbour/qmk_firmware#15 Add torn Resolves manna-harbour/qmk_firmware#16 Author: Brian Romanko <hello@bromanko.com> Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Change map to zip - Adds support for python3, still compatible with python2. Resolves manna-harbour/qmk_firmware#10 Resolves manna-harbour/qmk_firmware#19 Co-authored-by: Ori <ori@oribarbut.com> Add python-version Add sofle Add ergotravel Add ortho_5x12 Add ortho_4x10 Add :main no header argument to C code blocks resolves manna-harbour/qmk_firmware#11 resolves manna-harbour/qmk_firmware#12 Co-authored-by: RubioJr9 <u0893472@utah.edu> Add flipped layers and inverted-T nav alternative layouts - Separate tap_table into alphas_table and thumbs_table - Add mode argument to table-layout-half - Remove layer_name - Rename layers - Add mods and clipboard to MBO and mirror - Add MIRYOKU_LAYERS=FLIP - Add MIRYOKU_NAV=INVERTEDT Add layer diagrams Update contact section Update links for Bilateral Combinations and Retro Shift Add description and no reverse angle option to 60_ansi layout Update list of keyboards supporting community layouts - and example build command lines Change moonlander thumb keys Update list of keyboards supporting split_3x5_3 Add license to tangled C source files
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2020-10-15Add VIA code to ergoTravel (#10493)Harshit Goel
* Add VIA code to ergoTravel, VendorId changed to allow via * Update LTO_ENABLE for via * Accept comments from the QMK PR discussion * Restore original rules.mk from qmk master, update via rules to remove redundant bootmagic * rules update * find and use unique VID without qmk. Used 0x4A50, did not find clash * Removed unused via layer * Reset hard to last clean commit, redo changes for Hex Translation and Enum
2020-05-302020 May 30 Breaking Changes Update (#9215)James Young
* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
2019-12-09[Keymap] ergotravel updates (#7588)Yan-Fa Li
* Update rules.mk so it compiles again * Updates * Update keyboards/ergotravel/keymaps/yanfali/rules.mk * Update keyboards/ergotravel/keymaps/yanfali/rules.mk * Update keyboards/ergotravel/keymaps/yanfali/rules.mk
2019-11-20Remove keymap_config extern from default keymaps (#7399)Drashna Jaelre
* Remove keymap_config extern from default keymaps * Revert unicode Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :( Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-10-05Cleanup rules.mk for 32U4 keyboards, A-F (#6804)fauxpark
* Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps
2019-09-01Run dos2unix on whole repo (#6644)Drashna Jaelre
2019-05-07[Keymap] crkbd/keymaps/rs: add rs keymap to corne keyboard and adapt others ↵Olivier Poitrey
(#5181) Update all my keymaps to work with 40 keys. Refactor code using Userspace.
2019-03-13[Keymap] Add atreus, ergotravel and org60 keymaps (#5381)Jarred Steenvoorden
* Add atreus, ergotravel and org60 keymaps * Cleanup my keymap config files
2019-02-18Migrate ACTION_LAYER_TAP_TOGGLEs to TT()fauxpark
2019-02-17convert to unix line-endings [skip ci]QMK Bot
2019-02-17Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154)fauxpark
2019-02-17convert to unix line-endings [skip ci]QMK Bot
2019-02-16Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)fauxpark
2019-02-07Merge ErgoTravel default keymap to match Group Buy orders (#5071)Pierre Constantineau
2019-01-25rs: code friendly keymap for preonic, iris and my preonic clone (#4303)Olivier Poitrey
I worked on those keymap to simplify the use of 60% keyboards for coders. Instead of trying to mimic planck, this keymap remove raise/lower layer complexity and keep some important sign keys for coder in the upper right side pretty much the same way as they are on a full keyboard. A karabiner configuration is also provided to mimic most of the keymap features on the macbook internal keyboard for when you are forced to use it.
2018-12-18Keymap: A Planck style keymap with iris flair (#4677)Yan-Fa Li
* A Planck style keymap with iris flair - Re-arrange layers to be more planck like. - move backspace to right thumb - replace backspace with minus, more useful for coding - replace center keys with brackets - MT(MOD_LCTRL and ESCAPE) - Use QMK-DFU for bootloader - add a soft reset to keymap * Feedback from reviewers - remove redundant define (noroadsleft) - remove unused layer switch case (drashna)
2018-10-15convert to unix line-endings [skip ci]QMK Bot
2018-10-15Fix ErgoTravel BoardDrashna Jaelre
It was not properly including the "config_common" files, and was causing it to break on the configurator. Additionally, updated this to use the split common code.
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-06-13Configurator layout repair for Ergodone, Ergodox Infinity and ErgoTravel (#3173)noroadsleft
* Ergodone refactor * Ergodox Infinity refactor * Ergotravel refactor * Ergotravel configurator layout update * Fixing include on Ergodox Infinity narze keymap
2018-06-05adding all ErgoTravel Files (#3129)Pierre Constantineau
* adding all ErgoTravel Files * fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 14:50:19 +0000