summaryrefslogtreecommitdiff
path: root/keyboards/ergodox_infinity/config.h
AgeCommit message (Collapse)Author
2021-09-12Align ChibiOS I2C defs with other drivers (#14399)Joel Challis
* Align ChibiOS I2C defs with other drivers * Update keyboards/xelus/valor_frl_tkl/config.h Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-01Change keyboard level include guards to `pragma once` (#14248)Ryan
* Change keyboard level include guards to `pragma once` And clean up a lot of layout macros * Oops * Remove dangling endif
2021-08-22Make solo half of split keyboards (more) usable. (#13523)Joakim Tufvegren
* Make solo half of split keyboards (more) usable. Using only one half of a split keyboard (that's using the split_common framework to communicate) is not a great experience, since several read timeouts per scan cycle cause an unusably slow scan rate. This change blocks all split communication attempts for 500 ms (configurable) after an error occurs, causing the scan rate to become at least _more_ usable, but might need some tweaking to work fully on most keyboards. One read timeout still needs to occur after the 500 ms has passed, and if that timeout isn't low enough, some scan cycles may still be too slow. * Fix lint complaint. * Require 25 consecutive comm errors to see comms as disconnected. The number of max errors can be overridden by defining `SPLIT_MAX_CONNECTION_ERRORS`. * Add comments to new defines, and ability to disable disconnection check. Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible by most relevant numbers for the description. * Make lint happy ...again * Only update `connection_check_timer` when needed. * Add new defines to split keyboard documentation. * Move connection timeout logic to transport.c, add `is_transport_connected`. * Use split_common disconnection logic in matrix.c. Instead of doing more or less the same thing twice. * Move disconnection logic to `transport_master`. Is a cleaner implementation, and causes the scan rate while disconnected to increase instead of decrease. * Lint fixes. * Lower default `SERIAL_USART_TIMEOUT` to 20 ms. The read timeout must be low enough to not cause exessively long scan cycles when using a solo split half. 10 ms was determined from testing to work fine even with the slowest defined baudrate of 19200 (5 ms was too low for that case), so 20 ms should be fine for most cases. * Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h Was somewhat mistakenly included in an earlier PR. * Fix building with `USE_I2C`. * Reduce built firmware size. Not really sure why this works, the idea was taken from tzarc's work on split disconnection. * Tweak and improve opt-out for split disconnection logic. There are now two ways to opt out from this feature: * Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable the connection status checks (also affects the slave matrix reset logic in matrix.c, though). * Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the communication throttling while disconnected. Will make the firmware smaller. * Make split disconnection logic work with custom transports. Includes a fallback implementation for keyboards using a custom split_util.c but not a custom matrix.c (currently no such keyboard seems to be merged, though). * Remove unnecessary include of timer.h Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2021-07-19Switch Ergodox Infinity over to split_common (#13481)Joakim Tufvegren
2021-07-07Use the new ST7565 driver on Ergodox Infinity (#13165)Joakim Tufvegren
2021-06-10Migrate keyboards using uGFX to LED_MATRIX (#9657)Joakim Tufvegren
2019-01-27Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)Konstantin Đorđević
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2018-06-06Sweeping Visualizer for Ergodox Inifinity (#3136)Oryhara
* started work on halfkeyboard * update to keymap * halfkey layouts complete for dvorak and qwerty * added plover layout to halfkeyboard mapping * fixed error in dvorak layout right hand * fixed error in dvorak layout right hand, comments updated * thing * added minus and equals to normal layouts * added minus and equals to normal layouts * adde visualizer matching halfkeyboard mappings * adde visualizer matching halfkeyboard mappings * updated keymaps for mirror handedness functionality for all layers. Also added visualizer code for distinct color for each layer, and LCD text displaying the current layer. * had a KC_TILD where should have had KC_GRAV * its spelled KC_GRAVE * mouskeys and some visualizer work. * added LED backlight visuals * trying to get visualizer working * Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude * consolidated my custom animations into visualizer.c in my keymap directory * LED backlight keys animation KITT scanner * moved my custom rules.mk to my keymap folder * undoing changes i shouldn't have done * more fixes * updated comments on the visulizer code * steno keys added to plover layout * updated halfkeyboard rules to allow steno mode * adding my stuff back after hard reset * added a plover layout back in for androud steno app * fixed layer toggle typo * merged again * visualizer decided to have a conflict again. fixed. * keymap change to add mouse keys and put layer switching on shortcuts layer * made the ergodox LEDs scan left to right and back again * visualizer work * KITTSCANNER finally * fixed right hand shortcuts layer and removed handedness switching for base layer so jump in gaming works corrrectly * added another sweep that goes full on over both boards then full off in both directions * added function key layer and cleaned up some layer switching
2018-04-04Update input:club boards to use the proper vendor and deviceKaleb Elwert
2018-02-08Merge ChibiOS and LUFA descriptor support (#2362)fredizzimo
* Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2017-08-23Creates a layouts/ folder for keymaps shared between keyboards (#1609)Jack Humbert
* include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches