summaryrefslogtreecommitdiff
path: root/keyboards/doro67
AgeCommit message (Collapse)Author
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-02-09Remove FAUXCLICKY feature (deprecated) (#11829)Drashna Jaelre
2021-01-15Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-01-15Remove `DESCRIPTION`, B-D (#11513)Ryan
2021-01-07clean up generate-api errorsZach White
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-21Refactor to use led config - Part 5 (#10975)Joel Challis
* Refactor to use led config * Refactor to use led config * Refactor to use led config
2020-08-07Remove HD44780 References, Part 2 (#9918)James Young
* remove HD44780_ENABLE rules: C-F * remove HD44780_ENABLE config: C-F
2020-05-15[Keymap] Update personal userspace and keymaps (#9082)Konstantin Đorđević
* Replace custom RCTRL implementation with built-in LM Caveat: sends LCtrl instead of RCtrl * Enable VIA support in KBD6X keymap * Disable LTO on ChibiOS boards * Disable locking support and Magic keycodes for all keymaps * Organize and annotate rules.mk and config.h files * Enable Console for Melody96 keymap * L_RANGE_KEYMAP → LAYERS_KEYMAP * Revert "Replace custom RCTRL implementation with built-in LM" This reverts commit 17d706a82d7e31b53cd84efeb9b2ddb9922a2368. * Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps * Enable Bootmagic Lite for all VIA keymaps
2020-04-09[Keymap] Update personal userspace and keymaps (#8747)Konstantin Đorđević
* Update mousekey parameters in userspace * Disable GRAVE_ESC in boards where it isn't used * Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X * Disable RGB controls when Fn/Caps indicator lights are on * Use LTO_ENABLE instead of setting -flto directly * Add led_update_keymap, use SS_LCTL instead of SS_LCTRL * Change TAPPING_TOGGLE from 2 to 3
2020-03-14VIA Support: Doro 67 (#8399)MechMerlin
* add via keymap for doro67 * have more sensible VID and PID * apply the same VIA changes to the regular PCB * Update keyboards/doro67/rgb/keymaps/via/keymap.c * Update keyboards/doro67/regular/config.h * fix some formatting * add via support for multi doro67
2020-01-29Trim firmware sizes from default rules.mk, part 1 (#8027)ridingqwerty
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files * Correct some 'rules.mk' in boards buried under vendor folders * PR8027 patch Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2019-10-05Cleanup rules.mk for 32U4 keyboards, A-F (#6804)fauxpark
* Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps
2019-09-23[Keyboard] 65_ansi_blocker support for Doro67 (#6791)MechMerlin
* rename LAYOUT to LAYOUT_65_blocker_ansi * rename LAYOUT macro * enable LAYOUT_65_blocker_ansi community layout support and remove uneeded lines of code * rename LAYOUT to LAYOUT_65_blocker_ansi * rename LAYOUT macro * enable LAYOUT_65_blocker_ansi community layout support * enable LAYOUT_65_blocker_ansi support * fix rename mess up * add QMK Configurator support with the new rename * rename blocker_ansi to ansi_blocker as it rolls off the tongue easier
2019-09-05Add personal Doro67 multi keymap, fix bug in KBD6X keymap (#6674)Konstantin Đorđević
* Add missing void parameter declarations to *_light functions * Add doro67/multi:konstantin keymap * Allow FNLK to be canceled with Esc * Function layer → Fn layer in keymap comments
2019-09-03[Keyboard] Doro67 cleanup (#6514)Konstantin Đorđević
Add spacing to LAYOUT macros, add layout comments, improve consistency, fix ISO layout bug * Remove placeholder comments in regular.h and rgb.h * Change K## to k## in multi.h and regular.h * Add alignment whitespace in Doro67 LAYOUT macros * Update multi default keymaps and add layout comments * Update rgb default keymap and add layout comments * Add RESET to Fn layer in multi default keymaps * Replace KC_GESC with KC_ESC in rgb default keymap for consistency with other Doro keymaps * Update regular default keymap and add layout comments * WIP * Replace odd F1, F2 with proper split LShift/Backspace keys in default_multi * Minor fixes and tweaks in multi default keymaps * Fix Enter and NUHS positions in multi LAYOUT_iso * Return true in process_record_user in rgb default keymap * Update Enter position in multi info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update labels in multi info.json to match the default keymaps
2019-07-16Remove commented out MCUs in rules.mk (#5884)fauxpark
2019-06-06Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)Drashna Jaelre
2019-05-14[Keyboard] Added capslock LED support to the Doro67 Multi PCB. (#5875)Nicholas Shaff
2019-05-07rgb_led struct conversion (aka: Per led (key) type rgb matrix effects - part ↵XScorpion2
2) (#5783) * Initial conversion of the rgb_led struct * Converting last keyboard & updating effects to take advantage of the new structure * New struct should not be const * Updated docs * Changing define ___ for no led to NO_LED * Missed converting some keymap usages of the old struct layout
2019-04-30[Keyboard] doro67 readme clarification (#5736)Daniel Peregolise
* readme clarification * Apply suggestions from code review verbiage updates Co-Authored-By: dperegolise <danielperegolise@gmail.com> * mechmerlin suggested verbiage
2019-04-29Updated rgb_led struct field modifier to flags (#5619)XScorpion2
Updated effects to test led flags Updated massdrop to use new flags field for led toggle
2019-04-21[Keyboard] Doro67 RGB PCB (#5677)MechMerlin
* initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * initial commit * get rid of some of the vanilla code * set up matrix and pins * Create LAYOUT macro and an appropriate keymap * support for caps lock LED * add some documentation to the doro67 parent readme * align the language used in the several readme files * Use RGB Matrix and fix enter key bug * fix formatting * remove merge conflict artifacts * make a more useful default keymap * add configurator support for the RGB pcb * fix rgb matrix based on new info. Multipler should be reversed * forgot to actually set the pin output for caps lock led * fix offset keys in layer 1 keymap * code cleanup * use macros for the rgb_led calculations struct * set RGB led num to 67 as I mistakenly counted the caps lock led * cleanup config.h file * add RGB note in readme * get consistent naming in config file * fix some inconsistencies * readjust matrix and get rid of macros based on drashna's suggestions
2019-04-03[Keyboard] Doro67 Multi PCB port (#5539)Nicholas Shaff
* Initial portover of the doro68.json with corrected column pins. * Initial setup of LAYOUT_ansi and it's use in the default keymap. * Added F keys to default kemap on layer 1. * Added split space (and everything else) layout and a base keymap to be updated. * Renamed split_space to multi. * Changed product_id for doro. * Created a basic doro LAYOUT_iso and default keymap. * Copied over basic layout and keymap. * Added readme.md for doro67 multi. * Removed basic keyboad layout and keymap because it's a separate PCB. * Added backlight controls to the various keymaps. * Added explicit backlight pin define. * Increased number of backlight levels for flexibility. * Removed unnecessary line slashes and unified keymcaps. * Corrected ISO layout and switched position with multi. * Added keymap readme.md files. * Corrected ISO keymap. * Added Layouts to info.json for toolbox. * Re-added slashes as they were necessary here... * Corrected info.json/keymap discreptancies. * Updated copyright messages (and fixed small readme error). * Added missing line break spaces in readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Small alignment adjustment on the default keymap readme.md Co-Authored-By: ShadeDream <nick@shadedream.com>
2019-02-19get doro67 led workingmechmerlin
2019-02-13[Keyboard] New Keyboard: Doro67 Regular PCB (#5115)MechMerlin
* initial commit with edits to vanilla code * Add QMK Configurator support * add an appropriately generated keymap * pins, matrices, and features added in * moved it all to a regular directory. It's called regular as that's what it's called in the group buy. In the future we will have other directories for the other PCBs that are delivered to customers. * forgot caps lock led support * Update keyboards/doro67/regular/keymaps/default/config.h Use the NAME Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/doro67/regular/readme.md Be more explicit Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>