summaryrefslogtreecommitdiff
path: root/keyboards/chimera_ortho
AgeCommit message (Collapse)Author
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-02-27remove keyboard_folder from info.jsonZach White
2021-02-06Remove legacy print backward compatiblitly (#11805)Joel Challis
* Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes
2021-02-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-06Serial refactor (#11521)Ryan
2021-01-30fix chimera_ortho:gordon so it compilesZach White
2021-01-15Remove `DESCRIPTION`, B-D (#11513)Ryan
2020-01-29Trim firmware sizes from default rules.mk, part 1 (#8027)ridingqwerty
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files * Correct some 'rules.mk' in boards buried under vendor folders * PR8027 patch Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2019-10-05Cleanup rules.mk for 32U4 keyboards, A-F (#6804)fauxpark
* Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps
2019-09-11Tidy up backlight header use to avoid build issues (#6714)Joel Challis
2019-07-16Remove commented out MCUs in rules.mk (#5884)fauxpark
2019-03-01[Keymap] DCompact Layout Updates pt. 3 (#5209)Dan
* Fix whitespace and Markdown errors * Add DCompact layout implementation for Levinson keyboard * Rename README.md to readme.md * Rename README.md to readme.md * Rename README.md to readme.md * Update keyboards/keebio/levinson/keymaps/dcompact/keymap.c Co-Authored-By: loksonarius <loksonarius@users.noreply.github.com> * Update keyboards/keebio/levinson/keymaps/dcompact/keymap.c Co-Authored-By: loksonarius <loksonarius@users.noreply.github.com>
2019-01-27Fix `1<col` instead of `1<<col` typo in matrix_is_on()James Churchill
2019-01-26Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
2019-01-13Modified URLs to point to new locationsJeremy Bernhardt
2019-01-11Remove empty fn_actions[]fauxpark
2018-12-14Keyboard: Chimera Ortho refactor (#4652)noroadsleft
* Layout macro refactor - Renamed KC_KEYMAP to LAYOUT_kc - Renamed KEYMAP to LAYOUT - moved LAYOUT above LAYOUT_kc (Hoping this encourages users to use LAYOUT.) - updated layout macro name in info.json - white space changes for readability * Keymap refactor: default Default keymap now uses `#include QMK_KEYBOARD_H` and LAYOUT macro (from KC_KEYMAP/LAYOUT_kc). Keymap was also refactored to use process_record_user function instead of deprecated action_get_macro from TMK. Also moved LONGPRESS_DELAY and LAYER_TOGGLE_DELAY definitions to config.h. * Keymap refactor: dcompact - Changed chimera_ortho.h include for QMK_KEYBOARD_H - Updated layout name on keymap layers * Coding conventions fix in default keymap * Keymap refactor: gordon - Changed chimera_ortho.h include for QMK_KEYBOARD_H - Removed redundant includes of action_layer.h and process_tap_dance.h (superseded by QMK_KEYBOARD_H) - Removed redundant definitions for KC_NO and KC_TRNS - Updated layout name on keymap layers
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-06-19DCompact Update 1 (#3202)Dan
* Add Plover layer to DCompact from Planck default * Fix up and update DCompact READMEs * Add missing Steno features * Switch flags to re-enable extrakeys * Fix compilation bug in Chimera layout
2018-06-07Add DCompact Layout for Chimera Ortho and Planck Keyboards (#3145)Dan
* Clone default chimera-o layout * Make changes for base layer * Enable mouse suppport flag * Implement majority of DAD layout * Add mouse movement keys * Fine tune mouse control and fix tap toggle * Fix mouse button locations * Set adpater LED colors for layers * Increase responsiveness of key taps * Update layout for thumb comfort * Rename layout and add README * Add comments to keymap * Implement DCompact layout for Planck * Copy over DCompact README to planck * Fix up odds and ends for Planck
2018-04-11Remove bootloader from info.jsonsskullY
2018-04-07Pull information from config.h and rules.mk (#2711)skullydazed
* Pull information from config.h and rules.mk * Readd the kbd75 maintainer
2018-02-16Added Chimera LS and Chimera Ergo (#2335)GlenPickle
* Added Chimera Ortho keymap * added readme * fixed hardware link * Added KC_KEYMAP * resolving conflict * Added Chimera LS and Chimera Ergo * Added rules file * fixed rule files * Added Chimera Ortho keymap * Added KC_KEYMAP * Added Chimera LS and Chimera Ergo * fixed rule files * fixed rule files * fixed image links * Added KC_KEYMAP * Added Chimera LS and Chimera Ergo * Added Chimera Ortho keymap * fixed rule files * fixed rule files * fixed image links * Fixed KEYMAP vs KC_KEYMAP
2018-02-06Remove _quantum functions from custom matrix.c codeU-LANDSRAAD\drashna
2018-01-12Add Daniel Gordon's Ergodox Infinity and ChimeraDaniel Gordon
* gordon.c defines many aliases for KC codes. * gordon.c defines many advanced tap dance functions. * This is a squashed commit of about 6 months of work on chimera and ergodox infinity changes. * Ignore the change-id below. Change-Id: I83927139e8a80fe08992ae91ec7d62571498f7f7
2018-01-05Update info.jsonJack Humbert
2018-01-04Add info.json file for Chimera Ortho (#2217)Daniel Gordon
* Add info.json file for Chimera Ortho * Correct LAYOUT to KEYMAP Correct LAYOUT to KEYMAP in chimera ortho's json.info
2017-11-27Updates bootloader settings, adds file size check (#2029)Jack Humbert
* pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-10-31Chimera Ortho Readme (#1943)GlenPickle
* Added Chimera Ortho keymap * added readme * fixed hardware link
2017-10-31Added Chimera Ortho keymapWilliam Wilson