summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-22Initial USB2422 driver (#14835)Joel Challis
2021-10-20Relocate PS2 code (#14895)Joel Challis
* Relocate ps2 protocol code * clang * Move makefile logic
2021-10-18[Core] Add support for RISC-V builds and GD32VF103 MCU (#12508)Stefan Kerkmann
* Add support for RISC-V builds and GD32VF103 MCU * Add toolchain selection in chibios.mk based on the mcu selected in mcu_selection.mk * Reorder and added comments to chibios.mk to have a streamlined makefile * Add GD32VF103 mcu to possible targets for QMK. * Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent then rewriting every driver. * Add GigaDevice DFU bootloader as flash target, please note that dfu-util of at least version 0.10 is needed. * Add analog driver compatibility * Add apa102 bitbang driver compatibility * Add ws2812 bitbang driver compatibility * Add eeprom in flash emulation compatibility * Allow faster re-builds with ccache * Add SiPeed Longan Nano to platform files * Add SiPeed Longan Nano Onekeys * Make quine compatible with other bootloaders * Support builds with picolibc * Add risc-v toolchain to arch and debian/ubuntu scripts
2021-10-09Remove QWIIC_DRIVERS (#14174)Joel Challis
2021-10-08Improve Adafruit BLE configuration defines (#14749)Ryan
* Improve Adafruit BLE configuration defines * Formatting
2021-10-07Purge uGFX. (#14720)Nick Brassel
* Purge uGFX. * Remove remnants of visualizer. * Remove remnants of uGFX.
2021-09-21Relocate Adafruit BLE code (#14530)Ryan
2021-09-15Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-09-15[Bug] Fix IS31fl3741 driver to accept 1 or 2 addresses (#14451)Drashna Jaelre
Co-authored-by: Joel Challis <git@zvecr.com>
2021-09-14Refactor use of STM32_SYSCLK (#14430)Joel Challis
* Refactor use of STM32_SYSCLK * clang
2021-09-05[Core] Add `is_oled_scrolling` (#14305)JayceFayne
2021-08-24[Core] Refactor OLED to allow easy addition of other types (#13454)Xelus22
* add docs * core changes * update keyboards to new OLED * updated users to new OLED * update layouts to new OLED * fixup docs * drashna's suggestion * fix up docs * new keyboards with oled * core split changes * remaining keyboard files * Fix The Helix keyboards oled options * reflect develop Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-21[Core] Fix copypasta issue with pmw3360 sensor config (#14106)Drashna Jaelre
2021-08-20Improve pmw3360 sensor and make it more hardware agnostic (#14097)Drashna Jaelre
2021-08-21Fix up compilation issues. (#14095)Nick Brassel
2021-08-19[Core] Speed up pimoroni trackball driver (#13823)Dasky
2021-08-17Relocate platform specific drivers (#13894)Joel Challis
* Relocate platform specific drivers * Move stm eeprom * Tidy up slightly
2021-08-13Fix pmw3360 code to only output debug info if mouse debugging is enabled ↵Drashna Jaelre
(#13993)
2021-07-31__flash? (#13799)Joel Challis
2021-07-31Move some led drivers to common folder (#13749)Joel Challis
* Move some led drivers to common folder
2021-07-31[develop] Fix pimoroni trackball read address (#13810)Dasky
2021-07-27Align AW20216 driver (#13712)Joel Challis
* Align AW20216 driver * Update drivers/awinic/aw20216.h Co-authored-by: Ryan <fauxpark@gmail.com> * Review comments * formatting fixes * stop if start failed? * review comments Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-25[Bug] Include gpio.h in solenoid driver for GPIO Control functions (#13716)Drashna Jaelre
2021-07-25Haptic: driver-> feature (#13713)Joel Challis
2021-07-15Dual RGB Matrix IS31FL3737 driver support to address #13442 (#13457)Chris Cullin
* initial commit * removed changes to write_pwm_buffer * backward compatbility added * fixed issue with backward compatibility * documentation update * removed unneccessary comment. branched from master * updated per comments #13457 * removed blank line * cformat on diff files
2021-07-12Enable g_is31_leds PROGMEM for RGB Matrix IS31FL3737 driver (#13480)Chris Cullin
2021-07-03AW20216 use register increment for framebuffer flushes (#13430)Gigahawk
2021-07-02[Core] Unite half-duplex and full-duplex serial drivers (#13081)Stefan Kerkmann
* Unite half-duplex and full-duplex serial driver. * Add full duplex operation mode to the interrupt based driver * Delete DMA UART based full duplex driver * The new driver targets #11930 * Fix freezes with failing transactions in half-duplex * Increase default serial TX/RX buffer size to 128 bytes * Correctly use bool instead of size_t Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-06-23Allow settable SPI divisor for AW20216 driver, set default to 4 (#13309)Gigahawk
2021-06-23Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-06-23Optional OLED splash screen and fixed OLED i2c execution time saving (#12294)David Hoelscher
* Made OLED splash screen optional to reduce memory and fixed OLED i2c execution time saving * moved OLED address updates into their respective conditional checks
2021-06-21eeprom_i2c driver: added EXTERNAL_EEPROM_WP_PIN configuration option. (#12617)Purdea Andrei
2021-06-21Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-06-21Move optical sensor code to drivers folder (#13044)Drashna Jaelre
2021-06-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-06-20OLED font easter egg (#13269)Ryan
2021-06-19Add Per Key exclusions for Haptic Feedback (#12386)Roland Huber
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19ST7565 invert (#13237)Ryan
2021-06-19Add oled_invert (#13172)Ignaz Kevenaar
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-18Extensible split data sync (#11930)Nick Brassel
* Extensible split data sync capability through transactions. - Split common transport has been split up between the transport layer and data layer. - Split "transactions" model used, with convergence between I2C and serial data definitions. - Slave matrix "generation count" is used to determine if the full slave matrix needs to be retrieved. - Encoders get the same "generation count" treatment. - All other blocks of data are synchronised when a change is detected. - All transmissions have a globally-configurable deadline before a transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms). - Added atomicity for all core-synced data, preventing partial updates - Added retries to AVR i2c_master's i2c_start, to minimise the number of failed transactions when interrupts are disabled on the slave due to atomicity checks. - Some keyboards have had slight modifications made in order to ensure that they still build due to firmware size restrictions. * Fixup LED_MATRIX compile. * Parameterise ERROR_DISCONNECT_COUNT.
2021-06-17Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-06-17OLED driver tweaks (#13215)Ryan
2021-06-15Fix overrun in oled_write_raw when not at (0, 0) (#13204)Jonathan Rascher
2021-06-15Fix overrun in st7565_write_raw when not at (0, 0) (#13209)Jonathan Rascher
2021-06-10Add ST7565 LCD driver (#13089)Ryan
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10GMMK Pro RGB Support (#13147)Gigahawk
* Enable SPI1 for GMMK pro * Setup initial boilerplate for new LED driver * RGB matrix minimally functional * Map full LED matrix * Return keymap to default * Fix printscreen LED mapping * Reduce max brightness * Default values for AW20216 * Add documentation for AW20216 * Disable console and warnings * Run cformat * Update drivers/awinic/aw20216.h Co-authored-by: Drashna Jaelre <drashna@live.com> * make aw struct match issi struct Co-authored-by: Drashna Jaelre <drashna@live.com> * add led location defines Co-authored-by: Drashna Jaelre <drashna@live.com> * Use led pin definitions in keyboard.c * Add driver indices to led map * Fix elif typo * Run cformat * Update docs * Fix typo in docs * Document global brightness limits Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-08`spi_master` Kinetis support (#13098)Ryan
2021-06-03Tidy up spi_master includes (#13053)Ryan
2021-06-03Fix up WS2812 SPI driver on F072. (#13022)Nick Brassel
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only