summaryrefslogtreecommitdiff
path: root/docs
AgeCommit message (Collapse)Author
2022-07-14[Code] Add solid reactive gradient mode (#17228)Albert Y
2022-07-14[Core] PMW33XX drivers overhaul (#17613)Stefan Kerkmann
* PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme
2022-07-12Cirque trackpad features: circular scroll, inertial cursor (#17482)Daniel Kao
2022-07-13Grammar fixes for docs/feature_converters.md (#17652)James Young
2022-07-13Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-12[Docs] Add Encoder requirements to PR Checklist doc (#17634)Drashna Jaelre
Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-07-13Merge remote-tracking branch 'origin/master' into developzvecr
2022-07-13Add basic secure docs (#17577)Joel Challis
2022-07-08Add converter docs (#17593)Joel Challis
2022-07-07Make debounce() signal changes in the cooked matrix as return value (#17554)Stefan Kerkmann
2022-07-03Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-04Attempt to discourage manual MSYS install for new users (#17556)Joel Challis
2022-07-03Tentative Teensy 3.5 support (#14420)Ryan
* Tentative Teensy 3.5 support * Set firmware format to .hex for ARM Teensys * Got to "device descriptor failed" by comparing with Teensy 3.6 code * Drop down to 96MHz... * Bump back up to 120MHz
2022-07-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-02MSYS2 install: use MinGW python-qmk package (#17302)Ryan
* MSYS2 install: use MinGW python-qmk package * Add missing flashers * Note VC Redist for manual install * VC Redist no longer needed
2022-07-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-02Allow for RGB actions to take place on Keydown instead of Keyup (#16886)CoffeeIsLife
* Allow for switch on keydown * add docs
2022-07-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-02Add note about qmk doctor in newbs_flashing.md (#15688)ripdog
Co-authored-by: Drashna Jaelre <drashna@live.com>
2022-07-02Feature-ify Send String (#17275)Ryan
2022-07-02PoC: Swap Escape and Caps (#16336)Osamu Aoki
2022-07-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-02Add Zsh note for tab complete (#17226)jack
2022-07-02Add cli command to import keyboard|keymap|kbfirmware (#16668)Joel Challis
2022-07-02Added Wait time to sending each Keys for Dynamic Macros function (#16800)FREEWING.JP
Co-authored-by: Joel Challis <git@zvecr.com>
2022-07-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-07-02Add LED backlight/indicator info to reference_info_json.md (#17010)Josh Hinnebusch
Co-authored-by: Joel Challis <git@zvecr.com>
2022-07-02RP2040 emulated EEPROM. (#17519)Nick Brassel
2022-07-02[QP] Add ILI9488 support. (#17438)Nick Brassel
2022-06-30[Core] Add Raspberry Pi RP2040 support (#14877)Stefan Kerkmann
* Disable RESET keycode because of naming conflicts * Add Pico SDK as submodule * Add RP2040 build support to QMK * Adjust USB endpoint structs for RP2040 * Add RP2040 bootloader and double-tap reset routine * Add generic and pro micro RP2040 boards * Add RP2040 onekey keyboard * Add WS2812 PIO DMA enabled driver and documentation Supports regular and open-drain output configuration. RP2040 GPIOs are sadly not 5V tolerant, so this is a bit use-less or needs extra hardware or you take the risk to fry your hardware. * Adjust SIO Driver for RP2040 * Adjust I2C Driver for RP2040 * Adjust SPI Driver for RP2040 * Add PIO serial driver and documentation * Add general RP2040 documentation * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376)Nick Brassel
2022-06-29Update feature_split_keyboard.md to add extra detail about left and right ↵ihatechoosingusernames
matrices. (#17492)
2022-06-25improvements for Cirque Pinnacle trackpads (#17091)Thomas Kriechbaumer
2022-06-24Do not enable PERMISSIVE_HOLD when TAPPING_TERM exceeds 500ms (#15674)precondition
2022-06-23Refactor steno and add `STENO_PROTOCOL = [all|txbolt|geminipr]` (#17065)precondition
* Refactor steno into STENO_ENABLE_[ALL|GEMINI|BOLT] * Update stenography documentation * STENO_ENABLE_TXBOLT → STENO_ENABLE_BOLT TXBOLT is a better name but BOLT is more consistent with the pre-existing TX Bolt related constants, which all drop the "TX " prefix * Comments * STENO_ENABLE_[GEMINI|BOLT|ALL] → STENO_PROTOCOL = [geminipr|txbolt|all] * Add note on lacking V-USB support * Clear chord at the end of the switch(mode){send_steno_chord} block * Return true if NOEVENT * update_chord_xxx → add_xxx_key_to_chord * Enable the defines for all the protocols if STENO_PROTOCOL = all * Mention how to use `steno_set_mode` * Set the default steno protocol to "all" This is done so that existing keymaps invoking `steno_set_mode` don't all suddenly break * Add data driver equivalents for stenography feature * Document format of serial steno packets (Thanks dnaq) * Add missing comma
2022-06-23Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-06-23Update ref_functions.md (replaced deprecated `RESET`) (#17436)David Kosorin
2022-06-23Added global current to all other issi drivers who don't have it (#17448)Jamal Bouajjaj
2022-06-22Cirque Attenuation Setting (#17342)Kyle McCreery
2022-06-21Fix RGB heatmap to use XY positions and use correct led limits (#17184)Dasky
* Fix RGB heatmap to use XY positions * lower effect area limit and make configurable * tidy up macro * Fix triggering in both directions. * add docs * fix bug when decreasing value * performance tweak
2022-06-20Allow encoder config from info.json (#17295)Joel Challis
2022-06-21Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-06-21[Docs] clarify inner array of direct pin matrix (#17437)evils
2022-06-19IS31FL3737 Global Current Setting (#17420)Jamal Bouajjaj
2022-06-19[Core] Mouse key kinetic mode fix (#17176)Albert Y
Co-authored-by: Drashna Jaelre <drashna@live.com>
2022-06-18Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-06-19Add a note about using differents MCU family (#17416)coliss86
2022-06-19Make default layer size 16-bit (#15286)Drashna Jaelre
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2022-06-18[Core] Split ChibiOS usart split driver in protocol and hardware driver part ↵Stefan Kerkmann
(#16669)
2022-06-17[Core] Allow usage of ChibiOS's SIO driver for split keyboards (#15907)Stefan Kerkmann