| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
ergodox_ez: Update the algernon keymap to v1.2
|
|
Noticeable changes since the last pull request:
* The forced NKRO mode can be easily toggled off at compile-time, to
make the firmware compatible with certain operating systems.
* The `:;` key has changed behaviour: to access the `;` symbol, the key
needs to be double-tapped, instead of shifted.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both
the **base** and the **experimental** layers.
* The arrow and navigation keys were redone, they are now more
accessible, but the navigation keys require an extra tap to access.
* The **Emacs** layer is gone, replaced by a simplified
**navigation and media** layer.
* `LEAD v` types the firmware version, and the keymap version.
* On the **experimental** layer, the `L` and `Q`, and the `K` and `G`
keys were swapped.
* The **Steno** layer gained a few more `#` and `*` keys, to make it
easier on my fingers.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
|
|
|
|
* fixes from tmk's repo
* rename keyboard to keyboards
|
|
* enable 4 levels
* remove breathing stuff
* update channels, comments, hex
|
|
|
|
Warning reductions
|
|
I haven't had a chance to update the Arch base box in a while so using the Ubuntu one is far more likely to succeed for a new user (I did test that box recently as I traded my ErgoDox EZ to a friend and needed to reprogram it for him).
|
|
Unfortunately the supported targets, like "quick", "all", "clean",
and so on has to be repeated two extra times, but this is the best
I can do with my makefile skills.
|
|
|
|
|
|
* Added WS2812 support for KC60
* Reorganized WS2812 support into its own keymap
* Fixed relative link in README
* Moved WS2812 mention in README to the bottom
* Fixed titling in WS2812 README
* Reverted KC60 Makefile and default keymap back
* Moved RGB specific config.h to ws2812 keymap folder
* Added my personal keymap
* Updated compiled hex
* Reverted KC60 files to 3f6fac47 before pull request #419
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Added WS2812 support for KC60
* Reorganized WS2812 support into its own keymap
* Fixed relative link in README
* Moved WS2812 mention in README to the bottom
* Fixed titling in WS2812 README
* Reverted KC60 Makefile and default keymap back
* Moved RGB specific config.h to ws2812 keymap folder
|
|
|
|
* sorts out keycodes
* move midi around
* remove mbed
* replaces keymap with qmk/keymap_common
* fixes keymap.h
* keymap, config, quantum rearrange
* removes unneeded lufa stuff
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* More documentation
* Saving crontab for user on host
* Restructuring in keeping with recent changes to conventions
* Simplify submitting my fave cbbrowne keystroke by using SEND_STRING()
* Local change, not apropos to have in this repo
* Simplify logic; no need to return so much
* Add in a version key
* Add docs
* Split build date into a separate DEFINE
* Ensure there is a value even if not working within a git repo
* Should not include the compiled code in the repo
* compiled.hex files should not be included in the repo; they represent generated compiled code
* Fix spelling in comment
* Remove more generated files
* Add rule to ignore contents of .build directories; their contents are generated
* Revert removals of compiled files
|
|
|
|
|
|
|
|
Compared to the previous version, the following noteworthy changes have
been made to the keymap:
* The keyboard starts in NKRO mode, bootmagic and other things are
disabled.
* A STENO layer was added, to be used with Plover.
* An experimental layout was added, something halfway between Dvorak and
Capewell-Dvorak. A work in progress.
* `LEAD y` types \o/.
* Some keys on the BASE layer have been moved around:
- `?` moved to the left pinky, left of `Q`.
- `=` shifted one row down, but `F11` stayed where it was.
- `-` on the left half was replaced by `Tab`.
- `Tab`'s original position is taken by a `Media Next`/`Media Prev`
key.
- `:` now inputs `;` when shifted.
* `ESC` cancels the **HUN** layer too, not just modifiers.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
|
|
This adds the keyboard and keymap built, along with the QMK firmware's
git hash (or a timestamp), to OPT_DEFS. That, in turn, allows keymaps to
make use of these information, and do whatever they want with it. For
example, one could print them on `LEADER v` like this:
```c
SEQ_ONE_KEY (KC_V) {
SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
}
```
This addresses #366.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
|
|
* Don't save the ctags file in the repo.
* Initial support for the KC60 board. Only 5x5 working so far.
* Rename because this isn't the same KC60 as others.
* Add in some generic layout.
Pins seem to be in the right order except the 6th column spews
gibberish.
* Don't need this for now.
* Move this to some other folder.
* Trying again to start over.
* Don't need to start over because I figured out why the 'broken' stuff wasn't working.
* Attempt to enable backlighting. It's on on pin B7 like other boards.
* Fix last port changes and fix LED control in keymap.
* Trying some other LED code.
* Bootloader needs to be bigger. Disabling backlight for now.
* Simplify LED code while I try to figure it out.
* Turn back on backlighting.
* Backlighting works now. Just need to get levels or breathing working.
* Trying to allow for turning off the LEDs before I get to brightness levels.
* The missing link: need to run the init_ports function for LEDs to work properly.
* Removing breathing stuff since it bricks the board.
* Clean up default layer.
* Cleanup keymap, KC60 doesn't support a 5th right bottom-row button.
* Add in the keymap I want for now.
* Back to escape by default.
* Move my personal keymap to the new place for keymaps.
* Add the version number for clarity.
|
|
* adds support for GH60 Satan keyboard
ANSI 125 layout, capslock and backlight implemented, support for
WS2812LED strip included
* added Phantom and GH60 Satan to travis
|
|
* More documentation
* Saving crontab for user on host
* Restructuring in keeping with recent changes to conventions
* Simplify submitting my fave cbbrowne keystroke by using SEND_STRING()
* Local change, not apropos to have in this repo
* Simplify logic; no need to return so much
|
|
ANSI 125 layout, capslock and scrolllock implemented, support for
WS2812LED strip included.
|
|
|
|
|
|
|
|
* .build containment implemented
* no destructive variable setting - builds in either folder
* make from 3 places
* cleans before each build
* make from root with keyboard=keyboard, keymap=keymap
* make from keyboard/keyboard with keymap=keymap
* make from keymaps/keymap
* only implemented on planck
* adds color diag to avr-gcc
* makefiles for all plancks, clean-up
* quick build-all makefile for plancks
* reformatting of make output (colors)
* color toggle, tmk path corrections
* correct if statement for color
* move config.h to main makefile, updates preonic, atomic
* format update, all keyboards targets
* makefile optional for build all target, alps and arrow_pad updated
* alps updated
* make planck default, trying out travis recipe for all-keyboards
* all-keymaps target, different travis recipe
* updates alps64
* updates keyboards to new format
* updates clue* projects
* all projects updated, specialise EZ .hex, let .hex through
* updates travis
* automatically find root, keyboard, keymap
* silent echo, cleaned-up mass make output
* updates all keyboards' .hex files except EZ
* Rename Bantam44.c to bantam44.c
* Rename Bantam44.h to bantam44.h
* nananana
* adds six key keyboard
* does same to ez as rest
* updates send_string example
* brings ergodox_ez up to date
* updates template/new project script
* adds sixkeyboard
* adds readme for sixkeyboard
* adds sixkeyboard to travis
* filenames, gitignore mess
* define clock prescaler stuff manually
* make quick, size test example
* documentation and dfu-no-build
|
|
Rearranged the layer toggles and keys.
|
|
|
|
* clean trailing ws in Vagrantfile and util/avr_setup.sh
* replace triple quotes with heredoc.
Ruby doesn't have triple quotes; that's a Python thing. This was just being
parsed as multiple strings concatenated.
* add docker support to Vagrantfile
* make wants to find dfu-programmer in vagrant guest
|
|
|
