summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-29Fixup the gitbook configskullY
2017-06-29remove extraneous configskullY
2017-06-29remove the rest of the new pluginsskullY
2017-06-29remove most of the new pluginsskullY
2017-06-29remove dangling commasJack Humbert
2017-06-29add missing commaskullY
2017-06-29Add some gitboot pluginsskullY
2017-06-29Polish up custom_quantum_functionsskullY
2017-06-29use default base namesJack Humbert
2017-06-29testing out new homeJack Humbert
2017-06-29restructure summaryJack Humbert
2017-06-28Flesh out the quantum_keycodes documentationskullY
2017-06-29restructure keycode docsJack Humbert
2017-06-28adds config options mdJack Humbert
2017-06-28Rough draft for a document on understanding QMKskullY
2017-06-28update some copyright headersJack Humbert
2017-06-28cleanup nyquistJack Humbert
2017-06-28cleanup orthodoxJack Humbert
2017-06-28cleanup lets_splitJack Humbert
2017-06-27create initial code of conductJack Humbert
2017-06-27Merge pull request #1445 from qmk/dual_audioJack Humbert
Allow for duophony (C6 and B5) and B5 audio
2017-06-27don't let timer1 exist without b5 being enabledJack Humbert
2017-06-27add new arguements, docsJack Humbert
2017-06-27Merge branch 'master' of https://github.com/qmk/qmk_firmware into dual_audioJack Humbert
2017-06-27no glideJack Humbert
2017-06-27working duopholyJack Humbert
2017-06-27b5 audioJack Humbert
2017-06-27Add eclipse to the _summaryJack Humbert
2017-06-27Adds parenthesis where they might be neededJack Humbert
Addresses #764
2017-06-27Merge pull request #1441 from lindhe/swedishErez Zukerman
Create sv_SE Qwerty layout for ErgoDox EZ
2017-06-27Create sv_SE Qwerty layout for ErgoDoxAndreas Lindhé
*NOTE:* it might still be desirable to set the software layout to sv_SE in your OS. Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration I have tried making this as close of a match I could between the [default ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a standard Swedish Qwerty layout. Notable differences from default: ================================= * There are three special character buttons (acute accent, circumflex/tilde and apostrophe/asterisk) that don't have any buttons to map to naturally. I've put these at other places: * Acute accent (´) can be found in the lower left corner, conveniently placed to reach for making an é. * Apostrophe (') was put in the lower left corner, close to acute accent. * Circumflex (^) and asterisk (*) was placed in the lower right corner. * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left those out. I could only get the buttons to produce a single one of the characters. How can I get it to work properly? * The Alt button on right thumb was exchanged for AltGr (RAlt). * I changed the backslash in the numpad (layer 1) for a minus. Thought it was more sensible. * I didn't find a good place for the "<>|" button, so that one was left out. That is a problem that really needs to be resolved. Pipe can be found on layer one, however.
2017-06-26Allow mod swapping for mod tap (MT) (#1202)Jack Humbert
* allow mod swapping for mod tap * quick include * fix the mod swapping * make changes consistent with action code * fix bug * re-enable no gui, etc * fix binary comps * solid logic
2017-06-25Merge pull request #1431 from rai-suta/masterJack Humbert
Bugg fix and add keymap for testing JIS_KEYCODE switch.
2017-06-25Whitefox LED control (#1432)Ethan Madden
* use new grave_esc functionality * Port LED control from Ergodox Infinity to Whitefox
2017-06-25add support for Orthodox keyboard (#1436)Art Ortenburger
* Added orthodox * Modified readme * Modified readme * Modified readme * Updated makefile * Fixed keymap issues * Modified serial communications to allow for over 8 columns * Fixed sizeof command * Fixed some typing issues * Testing issue #1191 (n-column split i2c slave) Based on initial OrthoDox (serial) config by @reddragond and others, this attempts to add TWI (I2C) support. Relevant: <https://github.com/qmk/qmk_firmware/issues/1191> - per @ahtn recommendation, using memcpy for moving slave matrix into slave sending buffer - slave buffer has been enlarged using sizeof(matrix_row_t) - note: i2c.h now includes matrix.h - note: matrix.c includes <string.h> * Added i2c keymap - right col still not working * orthodox: re-added i2c keymap, based on serial * orthodox / issue #1191: trying 9-bit serial - orthodox serial protocol now sends 9 bits per row, instead of 16. Technically it's using MATRIX_COLS, so it might work generically. - ROW_MASK is #defined in serial.c to truncate the checksums to prevent overflows causing false errors. This macro should be renamed if it's kept. * Revert "Fixed sizeof command" This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9. Changes had been made to the lets_split serial driver for testing which mirrored the multi-byte-row changes made to support the orthodox. As the lets_split does not require these changes, and new improvements had been added to the orthodox port only, this commit reverts them. Because the new code could potentially reduce latency over the serial transport, it may be desirable to re-add in the future, by backporting the current working orthodox code. * orthodox: default serial keymap improvements - formatting has been improved - a few keys have been shifted, mainly in Raise and Lower layers, to be more like the default Planck layout - Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play Still To Do: - duplicate for TWI - Alt modifier - GUI modifier * orthodox: failed attempt at 16b/row TWI - duplicated updated serial keymap for "i2c" - removed string.h/memcpy, instead - hardcoded copying of six bytes per update - still doesn't work; master reports interconnect errors on txled * orthodox: adjusted default keymap - this is applied to both 'serial' and 'i2c' keymaps - Alt and GUI have been added, as they were missing - comma and period persist across more layers; Home/PgUp and End/PgDn have been moved slightly to accommodate * orthodox: revert TWI support to minimum to debug - disabled ssd1306 and hardware locking in build configuration - increased TWI buffer from 0x10 to 0x20 bytes - decreased TWI clock from 400000 to 100000 - removed hardcoded TWI multi-byte sending/receiving An 'i2c' build of this was found to work on a rev1 Orthodox, although slave-side col9 was understandably not working. When testing-time permits, features will be gradually re-enabled towards getting the full matrix supported over TWI. * orthodox: TWI (i2c) is working, kludge for col9 The TWI interconnect ("i2c" in directories and build config) is now working for the Orthodox, including the slave half's column #9. This is intended as an interim solution, as it's a kludge, not a fix. Rather than a working multi-byte implementation, the two col9 keys' bits are packed-into and unpacked-from the two unused bits in row1. Furthermore, the TWI clock constant has been reduced to 100000 from 400000, as testing revealed the higher value just didn't work. Testing also found that (with this kludge) increasing the TWI buffer was not necessary. This commit leaves many commented-out lines in matrix.c from previous testing, which will be removed in a future commit once the interconnects' multi-byte problems have been debugged more thoroughly. * orthodox: updated readme.md The readme for the Orthodox now includes a description of the keyboard, allusions to its author and availability, a linked photo, and links to the evolving build guide and the current keymap on KLE. This update has been prepared with /u/Deductivemonkee's assistance.
2017-06-25updates olkb readmes #1362Jack Humbert
2017-06-26Add a keymap for testing JIS_KEYCODE.rai-suta
2017-06-26Fix bug.rai-suta
2017-06-25Merge pull request #1427 from blakedietz/masterJack Humbert
Add keymaps for ergodox ez, hhkb and jd45 under user blakedietz
2017-06-25Merge pull request #1429 from fredizzimo/fixes_for_emulatorJack Humbert
Minor fixes to support the emulator
2017-06-25Change M_2_PI to 2 * PI as it should beFred Sundvik
2017-06-24Add keymaps for ergodox ez, hhkb and jd45 under user blakedietzBlake Dietz
2017-06-24Remove the DIODE_DIRECTION defines from lets_split so we can close #1067skullY
2017-06-24Fix #1135 by changing the default to at90usb1286skullY
2017-06-24Update _summary.mdJack Humbert
2017-06-24Merge pull request #1425 from kynikos/patch-1Jack Humbert
Fix typo
2017-06-24Merge pull request #1426 from rai-suta/masterJack Humbert
Add JIS_KEYCODE layout for send_string()
2017-06-24Add JIS_KEYCODE layout for send_string()rai-suta
2017-06-24Fix typoDario Giovannetti
2017-06-23update docs for ispJack Humbert