summaryrefslogtreecommitdiff
path: root/.github/workflows
AgeCommit message (Collapse)Author
2021-07-09enable manual trigger for api data (#13000)Zach White
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-18Make sure 'cformat' only runs on core files (#12909)Erovia
Co-authored-by: Zach White <skullydazed@drpepper.org>
2021-05-10Improve our CI tests (#11476)Zach White
* add a test and dry-run to qmk generate-api * add a dry-run to qmk pyformat * Add a --dry-run to qmk cformat * reverse the order of nose2 and flake8 tests * run CI test against cformat and pyformat * fix programming errors * tweak job name * fix argument * refine the files we select * fix stack trace in --ci * make cformat exit clean * fix c file extensions * decouple CI from pyformat * remove --ci arg * make ci happy * use the environment var instead * change output to text * fix log message * replace tabs
2021-03-06fix CI job: api-data->api_dataZach White
2021-03-06upload api data to spacesZach White
2021-02-15[CI] Format develop (#11893)Joel Challis
2021-02-06[CI] Auto Formatting - Swap from direct commit to PR (#11229)Joel Challis
* Swap from direct commit to PR * Fix up
2020-12-16Yet another stab at trying to get github actions to push (#11230)Joel Challis
2020-12-13Another attempt to fix formatting workflow (#11187)Joel Challis
2020-12-11CI automated format fixes (#11179)Joel Challis
* Format all C files for now, till diff logic works within CI * Fix recursion of dos2unix
2020-12-10CI: Add workflow for codebase formatting (#7382)Joel Challis
* Add workflow for codebase formatting * stash * review comments * Swap to a more complete push action
2020-12-06Use patch bump for auto tagging workflow (#11137)Joel Challis
2020-12-06CI: Add workflow for tagging essential modified files (#7384)Joel Challis
* Add workflow for tagging essential modified files * Update inline with recent actions * align rules to labeler * Update .github/workflows/auto_tag.yaml
2020-11-22identify the qmk-botZach White
2020-11-22Fix failed develop updates within CI (#11001)Joel Challis
* Fix inverted logic * skip locked instead of fail
2020-11-21push the API data for develop as well (#10852)Zach White
2020-11-21Rebase develop after a master push (#10812)Zach White
* rebase develop after a master push * limit this to qmk/qmk_firmware * change to a merge strategy * GITHUB_TOKEN isn't needed * check for .locked in develop * break up into more steps
2020-11-10Improve the QMK Lint workflow (#10909)Zach White
* properly set the exit_code * handle the case where exit_code is greater than 255
2020-11-10CI: Add docs build and deploy workflow (#7448)Joel Challis
* Add docs build and deploy workflow * Remove old travis docs workflow * update to cli command * Tidy up for review * formatting * Update to pass style checks * Update lib/python/qmk/cli/docs.py Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com> * Review comments - build->generate, use of verbose * Add docs * Update to match recent actions * Run within base_container * Convert cli to generate-docs * Convert cli to generate-docs - restore old file * Convert cli to generate-docs * Update docs Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
2020-11-07Add qmk info -l to show the layouts too (#10882)Zach White
2020-11-07New command: qmk lint (#10761)Zach White
* Basic qmk lint command * check for keymap readme * change the workflow from qmk info to qmk lint * add a strict mode * parsing -> parse * document qmk lint * small info logging cleanup * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * honor --strict in more places * change the job name to lint Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-31protect against those who develop with their fork on master (#10815)Joel Challis
2020-10-27add rsync to the api update processZach White
2020-10-25Generate api data on each push (#10609)Zach White
* add new qmk generate-api command, to generate a complete set of API data. * Generate api data and push it to the keyboard repo * fix typo * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * fixup api workflow * remove file-changes-action * use a more mainstream github action * fix yaml error * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * more uniform date handling * make flake8 happy * Update lib/python/qmk/decorators.py Co-authored-by: Erovia <Erovia@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-10-20Update PR labeler to use pull_request_target (#10695)Joel Challis
* Update labeler to use pull_request_target * Add back whitespace * Add CI label
2020-10-18Initial auto PR labeler config (#9814)Joel Challis
* Initial auto PR labeler config * Update .github/labeler.yml Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update since develop merged Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-09-05Update file changes action (#10245)Ryan
2020-08-17Swap git diff logic to github action when running qmk info (#9978)Joel Challis
* swap git diff logic to github action * Print out layouts when linting
2020-06-20CI: Run 'qmk info' on keyboard changes (#9212)Joel Challis
2020-04-19Update cli CI checkout to v2 (#8823)Joel Challis
2020-02-08CI: Add workflow for CLI testing (#7357)Joel Challis
Create GitHub Actions cli test workflow and remove travis runs of 'qmk pytest'
2019-10-26Revert "Initial actions/labeler config (#7091)" (#7156)Joel Challis
This reverts commit 32fdf4805ae8d76649fa821275cc2333c5e8bba9.
2019-10-25Initial actions/labeler config (#7091)Joel Challis
* Initial actions/labeler config * Initial actions/labeler config - add extra from review