summaryrefslogtreecommitdiff
path: root/tmk_core
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core')
-rw-r--r--tmk_core/common.mk19
-rw-r--r--tmk_core/common/arm_atsam/eeprom.c94
-rw-r--r--tmk_core/common/avr/suspend.c98
-rw-r--r--tmk_core/common/chibios/_wait.h2
-rw-r--r--tmk_core/common/chibios/chibios_config.h41
-rw-r--r--tmk_core/common/chibios/eeprom_stm32.c57
-rw-r--r--tmk_core/common/chibios/eeprom_stm32_defs.h19
-rw-r--r--tmk_core/common/chibios/flash_stm32.c43
-rw-r--r--tmk_core/common/chibios/suspend.c89
-rw-r--r--tmk_core/common/host.c15
-rw-r--r--tmk_core/common/host.h2
-rw-r--r--tmk_core/common/host_driver.h1
-rw-r--r--tmk_core/common/report.h6
-rw-r--r--tmk_core/common/suspend.h2
-rw-r--r--tmk_core/common/sync_timer.c2
-rw-r--r--tmk_core/common/sync_timer.h2
-rw-r--r--tmk_core/common/test/rules.mk1
-rw-r--r--tmk_core/protocol.mk9
-rw-r--r--tmk_core/protocol/adb.c535
-rw-r--r--tmk_core/protocol/adb.h106
-rw-r--r--tmk_core/protocol/chibios/chibios.c38
-rw-r--r--tmk_core/protocol/chibios/usb_main.c15
-rw-r--r--tmk_core/protocol/ibm4704.c185
-rw-r--r--tmk_core/protocol/ibm4704.h103
-rw-r--r--tmk_core/protocol/lufa.mk27
-rw-r--r--tmk_core/protocol/lufa/adafruit_ble.cpp701
-rw-r--r--tmk_core/protocol/lufa/adafruit_ble.h59
-rw-r--r--tmk_core/protocol/lufa/lufa.c48
-rw-r--r--tmk_core/protocol/lufa/lufa.h11
-rw-r--r--tmk_core/protocol/lufa/outputselect.c79
-rw-r--r--tmk_core/protocol/lufa/outputselect.h34
-rw-r--r--tmk_core/protocol/lufa/ringbuffer.hpp66
-rw-r--r--tmk_core/protocol/m0110.c583
-rw-r--r--tmk_core/protocol/m0110.h81
-rw-r--r--tmk_core/protocol/midi/qmk_midi.c41
-rw-r--r--tmk_core/protocol/news.c161
-rw-r--r--tmk_core/protocol/news.h48
-rw-r--r--tmk_core/protocol/next_kbd.c219
-rw-r--r--tmk_core/protocol/next_kbd.h60
-rw-r--r--tmk_core/protocol/usb_descriptor.c19
-rw-r--r--tmk_core/protocol/usb_hid/parser.h5
-rw-r--r--tmk_core/protocol/usb_hid/usb_hid.h6
-rw-r--r--tmk_core/protocol/vusb/vusb.c36
-rw-r--r--tmk_core/protocol/xt.h73
-rw-r--r--tmk_core/protocol/xt_interrupt.c166
-rw-r--r--tmk_core/readme.md11
46 files changed, 331 insertions, 3687 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk
index e44ff2f0ab..f0faa2dc3e 100644
--- a/tmk_core/common.mk
+++ b/tmk_core/common.mk
@@ -55,8 +55,6 @@ ifeq ($(strip $(NKRO_ENABLE)), yes)
$(info NKRO is not currently supported on V-USB, and has been disabled.)
else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
$(info NKRO is not currently supported with Bluetooth, and has been disabled.)
- else ifneq ($(BLUETOOTH),)
- $(info NKRO is not currently supported with Bluetooth, and has been disabled.)
else
TMK_COMMON_DEFS += -DNKRO_ENABLE
SHARED_EP_ENABLE = yes
@@ -77,23 +75,6 @@ ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes)
TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN
endif
-ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
- TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
- TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
-endif
-
-ifeq ($(strip $(BLUETOOTH)), AdafruitBLE)
- TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
- TMK_COMMON_DEFS += -DMODULE_ADAFRUIT_BLE
- TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
-endif
-
-ifeq ($(strip $(BLUETOOTH)), RN42)
- TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
- TMK_COMMON_DEFS += -DMODULE_RN42
- TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
-endif
-
ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes)
TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE
endif
diff --git a/tmk_core/common/arm_atsam/eeprom.c b/tmk_core/common/arm_atsam/eeprom.c
index ccd5d15a54..ff1a692623 100644
--- a/tmk_core/common/arm_atsam/eeprom.c
+++ b/tmk_core/common/arm_atsam/eeprom.c
@@ -13,24 +13,110 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-
#include "eeprom.h"
+#include "debug.h"
+#include "samd51j18a.h"
+#include "core_cm4.h"
+#include "component/nvmctrl.h"
#ifndef EEPROM_SIZE
# include "eeconfig.h"
# define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
#endif
-__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE];
+#ifndef MAX
+# define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef BUSY_RETRIES
+# define BUSY_RETRIES 10000
+#endif
+
+// #define DEBUG_EEPROM_OUTPUT
+
+/*
+ * Debug print utils
+ */
+#if defined(DEBUG_EEPROM_OUTPUT)
+# define eeprom_printf(fmt, ...) xprintf(fmt, ##__VA_ARGS__);
+#else /* NO_DEBUG */
+# define eeprom_printf(fmt, ...)
+#endif /* NO_DEBUG */
+
+__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE] = {0};
+volatile uint8_t * SmartEEPROM8 = (uint8_t *)SEEPROM_ADDR;
+
+static inline bool eeprom_is_busy(void) {
+ int timeout = BUSY_RETRIES;
+ while (NVMCTRL->SEESTAT.bit.BUSY && timeout-- > 0)
+ ;
+
+ return NVMCTRL->SEESTAT.bit.BUSY;
+}
+
+static uint32_t get_virtual_eeprom_size(void) {
+ // clang-format off
+ static const uint32_t VIRTUAL_EEPROM_MAP[11][8] = {
+ /* 4 8 16 32 64 128 256 512 */
+ /* 0*/ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ /* 1*/ { 512, 1024, 2048, 4096, 4096, 4096, 4096, 4096 },
+ /* 2*/ { 512, 1024, 2048, 4096, 8192, 8192, 8192, 8192 },
+ /* 3*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 },
+ /* 4*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 },
+ /* 5*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 },
+ /* 6*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 },
+ /* 7*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 },
+ /* 8*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 },
+ /* 9*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 },
+ /*10*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 },
+ };
+ // clang-format on
+
+ static uint32_t virtual_eeprom_size = UINT32_MAX;
+ if (virtual_eeprom_size == UINT32_MAX) {
+ virtual_eeprom_size = VIRTUAL_EEPROM_MAP[NVMCTRL->SEESTAT.bit.PSZ][NVMCTRL->SEESTAT.bit.SBLK];
+ }
+ // eeprom_printf("get_virtual_eeprom_size:: %d:%d:%d\n", NVMCTRL->SEESTAT.bit.PSZ, NVMCTRL->SEESTAT.bit.SBLK, virtual_eeprom_size);
+ return virtual_eeprom_size;
+}
uint8_t eeprom_read_byte(const uint8_t *addr) {
uintptr_t offset = (uintptr_t)addr;
- return buffer[offset];
+ if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) {
+ eeprom_printf("eeprom_read_byte:: out of bounds\n");
+ return 0x0;
+ }
+
+ if (get_virtual_eeprom_size() == 0) {
+ return buffer[offset];
+ }
+
+ if (eeprom_is_busy()) {
+ eeprom_printf("eeprom_write_byte:: timeout\n");
+ return 0x0;
+ }
+
+ return SmartEEPROM8[offset];
}
void eeprom_write_byte(uint8_t *addr, uint8_t value) {
uintptr_t offset = (uintptr_t)addr;
- buffer[offset] = value;
+ if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) {
+ eeprom_printf("eeprom_write_byte:: out of bounds\n");
+ return;
+ }
+
+ if (get_virtual_eeprom_size() == 0) {
+ buffer[offset] = value;
+ return;
+ }
+
+ if (eeprom_is_busy()) {
+ eeprom_printf("eeprom_write_byte:: timeout\n");
+ return;
+ }
+
+ SmartEEPROM8[offset] = value;
}
uint16_t eeprom_read_word(const uint16_t *addr) {
diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c
index 690d7f38ca..b614746e6c 100644
--- a/tmk_core/common/avr/suspend.c
+++ b/tmk_core/common/avr/suspend.c
@@ -16,25 +16,6 @@
# include "vusb.h"
#endif
-#ifdef BACKLIGHT_ENABLE
-# include "backlight.h"
-#endif
-
-#ifdef AUDIO_ENABLE
-# include "audio.h"
-#endif /* AUDIO_ENABLE */
-
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
-# include "rgblight.h"
-#endif
-
-#ifdef LED_MATRIX_ENABLE
-# include "led_matrix.h"
-#endif
-#ifdef RGB_MATRIX_ENABLE
-# include "rgb_matrix.h"
-#endif
-
/** \brief Suspend idle
*
* FIXME: needs doc
@@ -50,17 +31,6 @@ void suspend_idle(uint8_t time) {
// TODO: This needs some cleanup
-/** \brief Run keyboard level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_user(void) {}
-/** \brief Run keyboard level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
-
#if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect)
// clang-format off
@@ -135,41 +105,9 @@ void suspend_power_down(void) {
if (!vusb_suspended) return;
#endif
- suspend_power_down_kb();
+ suspend_power_down_quantum();
#ifndef NO_SUSPEND_POWER_DOWN
- // Turn off backlight
-# ifdef BACKLIGHT_ENABLE
- backlight_set(0);
-# endif
-
- // Turn off LED indicators
- uint8_t leds_off = 0;
-# if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
- if (is_backlight_enabled()) {
- // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off
- leds_off |= (1 << USB_LED_CAPS_LOCK);
- }
-# endif
- led_set(leds_off);
-
- // Turn off audio
-# ifdef AUDIO_ENABLE
- stop_all_notes();
-# endif
-
- // Turn off underglow
-# if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
- rgblight_suspend();
-# endif
-
-# if defined(LED_MATRIX_ENABLE)
- led_matrix_set_suspend_state(true);
-# endif
-# if defined(RGB_MATRIX_ENABLE)
- rgb_matrix_set_suspend_state(true);
-# endif
-
// Enter sleep state if possible (ie, the MCU has a watchdog timeout interrupt)
# if defined(WDT_vect)
power_down(WDTO_15MS);
@@ -189,18 +127,6 @@ bool suspend_wakeup_condition(void) {
return false;
}
-/** \brief run user level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_user(void) {}
-
-/** \brief run keyboard level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
-
/** \brief run immediately after wakeup
*
* FIXME: needs doc
@@ -209,27 +135,7 @@ void suspend_wakeup_init(void) {
// clear keyboard state
clear_keyboard();
- // Turn on backlight
-#ifdef BACKLIGHT_ENABLE
- backlight_init();
-#endif
-
- // Restore LED indicators
- led_set(host_keyboard_leds());
-
- // Wake up underglow
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
- rgblight_wakeup();
-#endif
-
-#if defined(LED_MATRIX_ENABLE)
- led_matrix_set_suspend_state(false);
-#endif
-#if defined(RGB_MATRIX_ENABLE)
- rgb_matrix_set_suspend_state(false);
-#endif
-
- suspend_wakeup_init_kb();
+ suspend_wakeup_init_quantum();
}
#if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect)
diff --git a/tmk_core/common/chibios/_wait.h b/tmk_core/common/chibios/_wait.h
index b740afbd24..2f36c64a2e 100644
--- a/tmk_core/common/chibios/_wait.h
+++ b/tmk_core/common/chibios/_wait.h
@@ -43,8 +43,6 @@ void wait_us(uint16_t duration);
#include "_wait.c"
-#define CPU_CLOCK STM32_SYSCLK
-
/* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus
* to which the GPIO is connected.
* The connected buses differ depending on the various series of MCUs.
diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h
index 23c65f9428..c35f589557 100644
--- a/tmk_core/common/chibios/chibios_config.h
+++ b/tmk_core/common/chibios/chibios_config.h
@@ -19,22 +19,33 @@
# define SPLIT_USB_DETECT // Force this on when dedicated pin is not used
#endif
-#if defined(STM32F1XX)
-# define USE_GPIOV1
-#endif
+// STM32 compatibility
+#if defined(MCU_STM32)
+# define CPU_CLOCK STM32_SYSCLK
-#if defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32L1XX)
-# define USE_I2CV1
-#endif
+# if defined(STM32F1XX)
+# define USE_GPIOV1
+# define PAL_MODE_ALTERNATE_OPENDRAIN PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# define PAL_MODE_ALTERNATE_PUSHPULL PAL_MODE_STM32_ALTERNATE_PUSHPULL
+# else
+# define PAL_OUTPUT_TYPE_OPENDRAIN PAL_STM32_OTYPE_OPENDRAIN
+# define PAL_OUTPUT_TYPE_PUSHPULL PAL_STM32_OTYPE_PUSHPULL
+# define PAL_OUTPUT_SPEED_HIGHEST PAL_STM32_OSPEED_HIGHEST
+# define PAL_PUPDR_FLOATING PAL_STM32_PUPDR_FLOATING
+# endif
-// teensy
-#if defined(K20x) || defined(KL2x)
-# define USE_I2CV1
-# define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed
-# define USE_GPIOV1
-# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY
+# if defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32L1XX)
+# define USE_I2CV1
+# endif
#endif
-#if defined(MK66F18)
-# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY
-#endif
+// teensy compatibility
+#if defined(MCU_KINETIS)
+# define CPU_CLOCK KINETIS_SYSCLK_FREQUENCY
+
+# if defined(K20x) || defined(KL2x)
+# define USE_I2CV1
+# define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed
+# define USE_GPIOV1
+# endif
+#endif \ No newline at end of file
diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/tmk_core/common/chibios/eeprom_stm32.c
index 1fdf8c1e29..acc6a48516 100644
--- a/tmk_core/common/chibios/eeprom_stm32.c
+++ b/tmk_core/common/chibios/eeprom_stm32.c
@@ -620,48 +620,11 @@ uint16_t EEPROM_ReadDataWord(uint16_t Address) {
}
/*****************************************************************************
- * Wrap library in AVR style functions.
+ * Bind to eeprom_driver.c
*******************************************************************************/
-uint8_t eeprom_read_byte(const uint8_t *Address) { return EEPROM_ReadDataByte((const uintptr_t)Address); }
+void eeprom_driver_init(void) { EEPROM_Init(); }
-void eeprom_write_byte(uint8_t *Address, uint8_t Value) { EEPROM_WriteDataByte((uintptr_t)Address, Value); }
-
-void eeprom_update_byte(uint8_t *Address, uint8_t Value) { EEPROM_WriteDataByte((uintptr_t)Address, Value); }
-
-uint16_t eeprom_read_word(const uint16_t *Address) { return EEPROM_ReadDataWord((const uintptr_t)Address); }
-
-void eeprom_write_word(uint16_t *Address, uint16_t Value) { EEPROM_WriteDataWord((uintptr_t)Address, Value); }
-
-void eeprom_update_word(uint16_t *Address, uint16_t Value) { EEPROM_WriteDataWord((uintptr_t)Address, Value); }
-
-uint32_t eeprom_read_dword(const uint32_t *Address) {
- const uint16_t p = (const uintptr_t)Address;
- /* Check word alignment */
- if (p % 2) {
- /* Not aligned */
- return (uint32_t)EEPROM_ReadDataByte(p) | (uint32_t)(EEPROM_ReadDataWord(p + 1) << 8) | (uint32_t)(EEPROM_ReadDataByte(p + 3) << 24);
- } else {
- /* Aligned */
- return EEPROM_ReadDataWord(p) | (EEPROM_ReadDataWord(p + 2) << 16);
- }
-}
-
-void eeprom_write_dword(uint32_t *Address, uint32_t Value) {
- uint16_t p = (const uintptr_t)Address;
- /* Check word alignment */
- if (p % 2) {
- /* Not aligned */
- EEPROM_WriteDataByte(p, (uint8_t)Value);
- EEPROM_WriteDataWord(p + 1, (uint16_t)(Value >> 8));
- EEPROM_WriteDataByte(p + 3, (uint8_t)(Value >> 24));
- } else {
- /* Aligned */
- EEPROM_WriteDataWord(p, (uint16_t)Value);
- EEPROM_WriteDataWord(p + 2, (uint16_t)(Value >> 16));
- }
-}
-
-void eeprom_update_dword(uint32_t *Address, uint32_t Value) { eeprom_write_dword(Address, Value); }
+void eeprom_driver_erase(void) { EEPROM_Erase(); }
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *src = (const uint8_t *)addr;
@@ -670,14 +633,14 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
/* Check word alignment */
if (len && (uintptr_t)src % 2) {
/* Read the unaligned first byte */
- *dest++ = eeprom_read_byte(src++);
+ *dest++ = EEPROM_ReadDataByte((const uintptr_t)src++);
--len;
}
uint16_t value;
bool aligned = ((uintptr_t)dest % 2 == 0);
while (len > 1) {
- value = eeprom_read_word((uint16_t *)src);
+ value = EEPROM_ReadDataWord((const uintptr_t)((uint16_t *)src));
if (aligned) {
*(uint16_t *)dest = value;
dest += 2;
@@ -689,7 +652,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
len -= 2;
}
if (len) {
- *dest = eeprom_read_byte(src);
+ *dest = EEPROM_ReadDataByte((const uintptr_t)src);
}
}
@@ -700,7 +663,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
/* Check word alignment */
if (len && (uintptr_t)dest % 2) {
/* Write the unaligned first byte */
- eeprom_write_byte(dest++, *src++);
+ EEPROM_WriteDataByte((uintptr_t)dest++, *src++);
--len;
}
@@ -712,15 +675,13 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
} else {
value = *(uint8_t *)src | (*(uint8_t *)(src + 1) << 8);
}
- eeprom_write_word((uint16_t *)dest, value);
+ EEPROM_WriteDataWord((uintptr_t)((uint16_t *)dest), value);
dest += 2;
src += 2;
len -= 2;
}
if (len) {
- eeprom_write_byte(dest, *src);
+ EEPROM_WriteDataByte((uintptr_t)dest, *src);
}
}
-
-void eeprom_update_block(const void *buf, void *addr, size_t len) { eeprom_write_block(buf, addr, len); }
diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/tmk_core/common/chibios/eeprom_stm32_defs.h
index 22b4ab858e..3499796264 100644
--- a/tmk_core/common/chibios/eeprom_stm32_defs.h
+++ b/tmk_core/common/chibios/eeprom_stm32_defs.h
@@ -32,6 +32,13 @@
# ifndef FEE_PAGE_COUNT
# define FEE_PAGE_COUNT 4 // How many pages are used
# endif
+# elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE)
+# ifndef FEE_PAGE_SIZE
+# define FEE_PAGE_SIZE 0x4000 // Page size = 16KByte
+# endif
+# ifndef FEE_PAGE_COUNT
+# define FEE_PAGE_COUNT 1 // How many pages are used
+# endif
# endif
#endif
@@ -40,17 +47,21 @@
# define FEE_MCU_FLASH_SIZE 32 // Size in Kb
# elif defined(STM32F103xB) || defined(STM32F072xB) || defined(STM32F070xB)
# define FEE_MCU_FLASH_SIZE 128 // Size in Kb
-# elif defined(STM32F303xC)
+# elif defined(STM32F303xC) || defined(STM32F401xC)
# define FEE_MCU_FLASH_SIZE 256 // Size in Kb
-# elif defined(STM32F103xE)
+# elif defined(STM32F103xE) || defined(STM32F401xE) || defined(STM32F411xE)
# define FEE_MCU_FLASH_SIZE 512 // Size in Kb
+# elif defined(STM32F405xG)
+# define FEE_MCU_FLASH_SIZE 1024 // Size in Kb
# endif
#endif
/* Start of the emulated eeprom */
#if !defined(FEE_PAGE_BASE_ADDRESS)
-# if 0
-/* TODO: Add support for F4 */
+# if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE)
+# ifndef FEE_PAGE_BASE_ADDRESS
+# define FEE_PAGE_BASE_ADDRESS 0x08004000 // bodge to force 2nd 16k page
+# endif
# else
# ifndef FEE_FLASH_BASE
# define FEE_FLASH_BASE 0x8000000
diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c
index 6b80ff71c3..35fb0eebdb 100644
--- a/tmk_core/common/chibios/flash_stm32.c
+++ b/tmk_core/common/chibios/flash_stm32.c
@@ -19,10 +19,33 @@
#include <hal.h>
#include "flash_stm32.h"
-#if defined(EEPROM_EMU_STM32F103xB)
+#if defined(STM32F1XX)
# define FLASH_SR_WRPERR FLASH_SR_WRPRTERR
#endif
+#if defined(STM32F4XX)
+# define FLASH_SR_PGERR (FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR)
+
+# define FLASH_KEY1 0x45670123U
+# define FLASH_KEY2 0xCDEF89ABU
+
+static uint8_t ADDR2PAGE(uint32_t Page_Address) {
+ switch (Page_Address) {
+ case 0x08000000 ... 0x08003FFF:
+ return 0;
+ case 0x08004000 ... 0x08007FFF:
+ return 1;
+ case 0x08008000 ... 0x0800BFFF:
+ return 2;
+ case 0x0800C000 ... 0x0800FFFF:
+ return 3;
+ }
+
+ // TODO: bad times...
+ return 7;
+}
+#endif
+
/* Delay definition */
#define EraseTimeout ((uint32_t)0x00000FFF)
#define ProgramTimeout ((uint32_t)0x0000001F)
@@ -53,7 +76,9 @@ FLASH_Status FLASH_GetStatus(void) {
if ((FLASH->SR & FLASH_SR_WRPERR) != 0) return FLASH_ERROR_WRP;
+#if defined(FLASH_OBR_OPTERR)
if ((FLASH->SR & FLASH_OBR_OPTERR) != 0) return FLASH_ERROR_OPT;
+#endif
return FLASH_COMPLETE;
}
@@ -95,15 +120,24 @@ FLASH_Status FLASH_ErasePage(uint32_t Page_Address) {
if (status == FLASH_COMPLETE) {
/* if the previous operation is completed, proceed to erase the page */
+#if defined(FLASH_CR_SNB)
+ FLASH->CR &= ~FLASH_CR_SNB;
+ FLASH->CR |= FLASH_CR_SER | (ADDR2PAGE(Page_Address) << FLASH_CR_SNB_Pos);
+#else
FLASH->CR |= FLASH_CR_PER;
FLASH->AR = Page_Address;
+#endif
FLASH->CR |= FLASH_CR_STRT;
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(EraseTimeout);
if (status != FLASH_TIMEOUT) {
- /* if the erase operation is completed, disable the PER Bit */
+ /* if the erase operation is completed, disable the configured Bits */
+#if defined(FLASH_CR_SNB)
+ FLASH->CR &= ~(FLASH_CR_SER | FLASH_CR_SNB);
+#else
FLASH->CR &= ~FLASH_CR_PER;
+#endif
}
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR);
}
@@ -126,6 +160,11 @@ FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) {
status = FLASH_WaitForLastOperation(ProgramTimeout);
if (status == FLASH_COMPLETE) {
/* if the previous operation is completed, proceed to program the new data */
+
+#if defined(FLASH_CR_PSIZE)
+ FLASH->CR &= ~FLASH_CR_PSIZE;
+ FLASH->CR |= FLASH_CR_PSIZE_0;
+#endif
FLASH->CR |= FLASH_CR_PG;
*(__IO uint16_t*)Address = Data;
/* Wait for last operation to be completed */
diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c
index 38517e06f0..9310a99920 100644
--- a/tmk_core/common/chibios/suspend.c
+++ b/tmk_core/common/chibios/suspend.c
@@ -7,30 +7,12 @@
#include "action.h"
#include "action_util.h"
#include "mousekey.h"
+#include "programmable_button.h"
#include "host.h"
#include "suspend.h"
#include "led.h"
#include "wait.h"
-#ifdef AUDIO_ENABLE
-# include "audio.h"
-#endif /* AUDIO_ENABLE */
-
-#ifdef BACKLIGHT_ENABLE
-# include "backlight.h"
-#endif
-
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
-# include "rgblight.h"
-#endif
-
-#ifdef LED_MATRIX_ENABLE
-# include "led_matrix.h"
-#endif
-#ifdef RGB_MATRIX_ENABLE
-# include "rgb_matrix.h"
-#endif
-
/** \brief suspend idle
*
* FIXME: needs doc
@@ -40,61 +22,12 @@ void suspend_idle(uint8_t time) {
wait_ms(time);
}
-/** \brief Run keyboard level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_user(void) {}
-/** \brief Run keyboard level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
-
/** \brief suspend power down
*
* FIXME: needs doc
*/
void suspend_power_down(void) {
-#ifdef BACKLIGHT_ENABLE
- backlight_set(0);
-#endif
-
-#ifdef LED_MATRIX_ENABLE
- led_matrix_task();
-#endif
-#ifdef RGB_MATRIX_ENABLE
- rgb_matrix_task();
-#endif
-
- // Turn off LED indicators
- uint8_t leds_off = 0;
-#if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
- if (is_backlight_enabled()) {
- // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off
- leds_off |= (1 << USB_LED_CAPS_LOCK);
- }
-#endif
- led_set(leds_off);
-
- // TODO: figure out what to power down and how
- // shouldn't power down TPM/FTM if we want a breathing LED
- // also shouldn't power down USB
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
- rgblight_suspend();
-#endif
-
-#if defined(LED_MATRIX_ENABLE)
- led_matrix_set_suspend_state(true);
-#endif
-#if defined(RGB_MATRIX_ENABLE)
- rgb_matrix_set_suspend_state(true);
-#endif
-#ifdef AUDIO_ENABLE
- stop_all_notes();
-#endif /* AUDIO_ENABLE */
-
- suspend_power_down_kb();
+ suspend_power_down_quantum();
// on AVR, this enables the watchdog for 15ms (max), and goes to
// SLEEP_MODE_PWR_DOWN
@@ -147,23 +80,13 @@ void suspend_wakeup_init(void) {
#ifdef MOUSEKEY_ENABLE
mousekey_clear();
#endif /* MOUSEKEY_ENABLE */
+#ifdef PROGRAMMABLE_BUTTON_ENABLE
+ programmable_button_clear();
+#endif /* PROGRAMMABLE_BUTTON_ENABLE */
#ifdef EXTRAKEY_ENABLE
host_system_send(0);
host_consumer_send(0);
#endif /* EXTRAKEY_ENABLE */
-#ifdef BACKLIGHT_ENABLE
- backlight_init();
-#endif /* BACKLIGHT_ENABLE */
- led_set(host_keyboard_leds());
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
- rgblight_wakeup();
-#endif
-#if defined(LED_MATRIX_ENABLE)
- led_matrix_set_suspend_state(false);
-#endif
-#if defined(RGB_MATRIX_ENABLE)
- rgb_matrix_set_suspend_state(false);
-#endif
- suspend_wakeup_init_kb();
+ suspend_wakeup_init_quantum();
}
diff --git a/tmk_core/common/host.c b/tmk_core/common/host.c
index f0c396b189..56d4bb0847 100644
--- a/tmk_core/common/host.c
+++ b/tmk_core/common/host.c
@@ -30,8 +30,9 @@ extern keymap_config_t keymap_config;
#endif
static host_driver_t *driver;
-static uint16_t last_system_report = 0;
-static uint16_t last_consumer_report = 0;
+static uint16_t last_system_report = 0;
+static uint16_t last_consumer_report = 0;
+static uint32_t last_programmable_button_report = 0;
void host_set_driver(host_driver_t *d) { driver = d; }
@@ -122,6 +123,16 @@ void host_digitizer_send(digitizer_t *digitizer) {
__attribute__((weak)) void send_digitizer(report_digitizer_t *report) {}
+void host_programmable_button_send(uint32_t report) {
+ if (report == last_programmable_button_report) return;
+ last_programmable_button_report = report;
+
+ if (!driver) return;
+ (*driver->send_programmable_button)(report);
+}
+
uint16_t host_last_system_report(void) { return last_system_report; }
uint16_t host_last_consumer_report(void) { return last_consumer_report; }
+
+uint32_t host_last_programmable_button_report(void) { return last_programmable_button_report; }
diff --git a/tmk_core/common/host.h b/tmk_core/common/host.h
index 2cffef6e15..6b15f0d0c1 100644
--- a/tmk_core/common/host.h
+++ b/tmk_core/common/host.h
@@ -47,9 +47,11 @@ void host_keyboard_send(report_keyboard_t *report);
void host_mouse_send(report_mouse_t *report);
void host_system_send(uint16_t data);
void host_consumer_send(uint16_t data);
+void host_programmable_button_send(uint32_t data);
uint16_t host_last_system_report(void);
uint16_t host_last_consumer_report(void);
+uint32_t host_last_programmable_button_report(void);
#ifdef __cplusplus
}
diff --git a/tmk_core/common/host_driver.h b/tmk_core/common/host_driver.h
index 2aebca043d..affd0dcb34 100644
--- a/tmk_core/common/host_driver.h
+++ b/tmk_core/common/host_driver.h
@@ -29,6 +29,7 @@ typedef struct {
void (*send_mouse)(report_mouse_t *);
void (*send_system)(uint16_t);
void (*send_consumer)(uint16_t);
+ void (*send_programmable_button)(uint32_t);
} host_driver_t;
void send_digitizer(report_digitizer_t *report); \ No newline at end of file
diff --git a/tmk_core/common/report.h b/tmk_core/common/report.h
index f2223e8063..1adc892f3b 100644
--- a/tmk_core/common/report.h
+++ b/tmk_core/common/report.h
@@ -29,6 +29,7 @@ enum hid_report_ids {
REPORT_ID_MOUSE,
REPORT_ID_SYSTEM,
REPORT_ID_CONSUMER,
+ REPORT_ID_PROGRAMMABLE_BUTTON,
REPORT_ID_NKRO,
REPORT_ID_JOYSTICK,
REPORT_ID_DIGITIZER
@@ -196,6 +197,11 @@ typedef struct {
} __attribute__((packed)) report_extra_t;
typedef struct {
+ uint8_t report_id;
+ uint32_t usage;
+} __attribute__((packed)) report_programmable_button_t;
+
+typedef struct {
#ifdef MOUSE_SHARED_EP
uint8_t report_id;
#endif
diff --git a/tmk_core/common/suspend.h b/tmk_core/common/suspend.h
index 95845e4b63..081735f90e 100644
--- a/tmk_core/common/suspend.h
+++ b/tmk_core/common/suspend.h
@@ -10,8 +10,10 @@ void suspend_wakeup_init(void);
void suspend_wakeup_init_user(void);
void suspend_wakeup_init_kb(void);
+void suspend_wakeup_init_quantum(void);
void suspend_power_down_user(void);
void suspend_power_down_kb(void);
+void suspend_power_down_quantum(void);
#ifndef USB_SUSPEND_WAKEUP_DELAY
# define USB_SUSPEND_WAKEUP_DELAY 0
diff --git a/tmk_core/common/sync_timer.c b/tmk_core/common/sync_timer.c
index 68b92d8b43..de24b463b6 100644
--- a/tmk_core/common/sync_timer.c
+++ b/tmk_core/common/sync_timer.c
@@ -26,7 +26,7 @@ SOFTWARE.
#include "sync_timer.h"
#include "keyboard.h"
-#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER)
+#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER)
volatile int32_t sync_timer_ms;
void sync_timer_init(void) { sync_timer_ms = 0; }
diff --git a/tmk_core/common/sync_timer.h b/tmk_core/common/sync_timer.h
index 744e2b50d5..9ddef45bb2 100644
--- a/tmk_core/common/sync_timer.h
+++ b/tmk_core/common/sync_timer.h
@@ -32,7 +32,7 @@ SOFTWARE.
extern "C" {
#endif
-#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER)
+#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER)
void sync_timer_init(void);
void sync_timer_update(uint32_t time);
uint16_t sync_timer_read(void);
diff --git a/tmk_core/common/test/rules.mk b/tmk_core/common/test/rules.mk
index 48632a095b..73d2302da7 100644
--- a/tmk_core/common/test/rules.mk
+++ b/tmk_core/common/test/rules.mk
@@ -16,6 +16,7 @@ eeprom_stm32_tiny_INC := $(eeprom_stm32_INC)
eeprom_stm32_large_INC := $(eeprom_stm32_INC)
eeprom_stm32_SRC := \
+ $(TOP_DIR)/drivers/eeprom/eeprom_driver.c \
$(TMK_PATH)/common/test/eeprom_stm32_tests.cpp \
$(TMK_PATH)/common/test/flash_stm32_mock.c \
$(TMK_PATH)/common/chibios/eeprom_stm32.c
diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk
index b61f2f5463..30c87a0f12 100644
--- a/tmk_core/protocol.mk
+++ b/tmk_core/protocol.mk
@@ -45,15 +45,6 @@ ifeq ($(strip $(SERIAL_MOUSE_USE_UART)), yes)
SRC += $(PROTOCOL_DIR)/serial_uart.c
endif
-ifeq ($(strip $(ADB_MOUSE_ENABLE)), yes)
- OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
-endif
-
-ifeq ($(strip $(XT_ENABLE)), yes)
- SRC += $(PROTOCOL_DIR)/xt_interrupt.c
- OPT_DEFS += -DXT_ENABLE
-endif
-
ifeq ($(strip $(USB_HID_ENABLE)), yes)
include $(TMK_DIR)/protocol/usb_hid.mk
endif
diff --git a/tmk_core/protocol/adb.c b/tmk_core/protocol/adb.c
deleted file mode 100644
index 367f1b09fa..0000000000
--- a/tmk_core/protocol/adb.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
-Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
-Copyright 2013 Shay Green <gblargg@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <util/delay.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "adb.h"
-#include "print.h"
-
-// GCC doesn't inline functions normally
-#define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT))
-#define data_hi() (ADB_DDR &= ~(1 << ADB_DATA_BIT))
-#define data_in() (ADB_PIN & (1 << ADB_DATA_BIT))
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo(void);
-static inline void psw_hi(void);
-static inline bool psw_in(void);
-#endif
-
-static inline void attention(void);
-static inline void place_bit0(void);
-static inline void place_bit1(void);
-static inline void send_byte(uint8_t data);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-
-void adb_host_init(void) {
- ADB_PORT &= ~(1 << ADB_DATA_BIT);
- data_hi();
-#ifdef ADB_PSW_BIT
- psw_hi();
-#endif
-}
-
-#ifdef ADB_PSW_BIT
-bool adb_host_psw(void) { return psw_in(); }
-#endif
-
-/*
- * Don't call this in a row without the delay, otherwise it makes some of poor controllers
- * overloaded and misses strokes. Recommended interval is 12ms.
- *
- * Thanks a lot, blargg!
- * <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919>
- * <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139>
- */
-uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); }
-
-#ifdef ADB_MOUSE_ENABLE
-__attribute__((weak)) void adb_mouse_init(void) { return; }
-
-__attribute__((weak)) void adb_mouse_task(void) { return; }
-
-uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); }
-#endif
-
-// This sends Talk command to read data from register and returns length of the data.
-uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
- for (int8_t i = 0; i < len; i++) buf[i] = 0;
-
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_TALK | reg);
- place_bit0(); // Stopbit(0)
- // TODO: Service Request(Srq):
- // Device holds low part of comannd stopbit for 140-260us
- //
- // Command:
- // ......._ ______________________ ___ ............_ -------
- // | | | | | | |
- // Command | | | | | Data bytes | |
- // ........|___| | 140-260 |__| |_............|___|
- // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
- //
- // Command without data:
- // ......._ __________________________
- // | |
- // Command | |
- // ........|___| | 140-260 |
- // |stop0 | Tlt Stop-to-Start |
- //
- // Service Request:
- // ......._ ______ ___ ............_ -------
- // | 140-260 | | | | | |
- // Command | Service Request | | | | Data bytes | |
- // ........|___________________| |__| |_............|___|
- // |stop0 | |start1| |stop0 |
- // ......._ __________
- // | 140-260 |
- // Command | Service Request |
- // ........|___________________|
- // |stop0 |
- // This can be happened?
- // ......._ ______________________ ___ ............_ -----
- // | | | | | | 140-260 |
- // Command | | | | | Data bytes | Service Request |
- // ........|___| | 140-260 |__| |_............|_________________|
- // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
- //
- // "Service requests are issued by the devices during a very specific time at the
- // end of the reception of the command packet.
- // If a device in need of service issues a service request, it must do so within
- // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs."
- //
- // "A device sends a Service Request signal by holding the bus low during the low
- // portion of the stop bit of any command or data transaction. The device must lengthen
- // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15."
- // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf
- if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored
- xprintf("R");
- sei();
- return 0;
- }
- if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us)
- sei();
- return 0; // No data from device(not error);
- }
-
- // start bit(1)
- if (!wait_data_hi(40)) {
- xprintf("S");
- sei();
- return 0;
- }
- if (!wait_data_lo(100)) {
- xprintf("s");
- sei();
- return 0;
- }
-
- uint8_t n = 0; // bit count
- do {
- //
- // |<- bit_cell_max(130) ->|
- // | |<- lo ->|
- // | | |<-hi->|
- // _______
- // | | |
- // | 130-lo | lo-hi |
- // |________| |
- //
- uint8_t lo = (uint8_t)wait_data_hi(130);
- if (!lo) goto error; // no more bit or after stop bit
-
- uint8_t hi = (uint8_t)wait_data_lo(lo);
- if (!hi) goto error; // stop bit extedned by Srq?
-
- if (n / 8 >= len) continue; // can't store in buf
-
- buf[n / 8] <<= 1;
- if ((130 - lo) < (lo - hi)) {
- buf[n / 8] |= 1;
- }
- } while (++n);
-
-error:
- sei();
- return n / 8;
-}
-
-uint16_t adb_host_talk(uint8_t addr, uint8_t reg) {
- uint8_t len;
- uint8_t buf[8];
- len = adb_host_talk_buf(addr, reg, buf, 8);
- if (len != 2) return 0;
- return (buf[0] << 8 | buf[1]);
-}
-
-void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_LISTEN | reg);
- place_bit0(); // Stopbit(0)
- // TODO: Service Request
- _delay_us(200); // Tlt/Stop to Start
- place_bit1(); // Startbit(1)
- for (int8_t i = 0; i < len; i++) {
- send_byte(buf[i]);
- // xprintf("%02X ", buf[i]);
- }
- place_bit0(); // Stopbit(0);
- sei();
-}
-
-void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) {
- uint8_t buf[2] = {data_h, data_l};
- adb_host_listen_buf(addr, reg, buf, 2);
-}
-
-void adb_host_flush(uint8_t addr) {
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_FLUSH);
- place_bit0(); // Stopbit(0)
- _delay_us(200); // Tlt/Stop to Start
- sei();
-}
-
-// send state of LEDs
-void adb_host_kbd_led(uint8_t led) {
- // Listen Register2
- // upper byte: not used
- // lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock
- adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07);
-}
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo() {
- ADB_DDR |= (1 << ADB_PSW_BIT);
- ADB_PORT &= ~(1 << ADB_PSW_BIT);
-}
-static inline void psw_hi() {
- ADB_PORT |= (1 << ADB_PSW_BIT);
- ADB_DDR &= ~(1 << ADB_PSW_BIT);
-}
-static inline bool psw_in() {
- ADB_PORT |= (1 << ADB_PSW_BIT);
- ADB_DDR &= ~(1 << ADB_PSW_BIT);
- return ADB_PIN & (1 << ADB_PSW_BIT);
-}
-#endif
-
-static inline void attention(void) {
- data_lo();
- _delay_us(800 - 35); // bit1 holds lo for 35 more
- place_bit1();
-}
-
-static inline void place_bit0(void) {
- data_lo();
- _delay_us(65);
- data_hi();
- _delay_us(35);
-}
-
-static inline void place_bit1(void) {
- data_lo();
- _delay_us(35);
- data_hi();
- _delay_us(65);
-}
-
-static inline void send_byte(uint8_t data) {
- for (int i = 0; i < 8; i++) {
- if (data & (0x80 >> i))
- place_bit1();
- else
- place_bit0();
- }
-}
-
-// These are carefully coded to take 6 cycles of overhead.
-// inline asm approach became too convoluted
-static inline uint16_t wait_data_lo(uint16_t us) {
- do {
- if (!data_in()) break;
- _delay_us(1 - (6 * 1000000.0 / F_CPU));
- } while (--us);
- return us;
-}
-
-static inline uint16_t wait_data_hi(uint16_t us) {
- do {
- if (data_in()) break;
- _delay_us(1 - (6 * 1000000.0 / F_CPU));
- } while (--us);
- return us;
-}
-
-/*
-ADB Protocol
-============
-
-Resources
----------
-ADB - The Untold Story: Space Aliens Ate My Mouse
- http://developer.apple.com/legacy/mac/library/#technotes/hw/hw_01.html
-ADB Manager
- http://developer.apple.com/legacy/mac/library/documentation/mac/pdf/Devices/ADB_Manager.pdf
- Service request(5-17)
-Apple IIgs Hardware Reference Second Edition [Chapter6 p121]
- ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
-ADB Keycode
- http://72.0.193.250/Documentation/macppc/adbkeycodes/
- http://m0115.web.fc2.com/m0115.jpg
- [Inside Macintosh volume V, pages 191-192]
- http://www.opensource.apple.com/source/IOHIDFamily/IOHIDFamily-421.18.3/IOHIDFamily/Cosmo_USB2ADB.c
-ADB Signaling
- http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
-ADB Overview & History
- http://en.wikipedia.org/wiki/Apple_Desktop_Bus
-Microchip Application Note: ADB device(with code for PIC16C)
- http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
-AVR ATtiny2131 ADB to PS/2 converter(Japanese)
- http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
-
-
-Pinouts
--------
- ADB female socket from the front:
- __________
- | | <--- top
- | 4o o3 |
- |2o o1|
- | == |
- |________| <--- bottom
- | | <--- 4pins
-
-
- ADB female socket from bottom:
-
- ========== <--- front
- | |
- | |
- |2o o1|
- |4o o3|
- ---------- <--- back
-
- 1: Data
- 2: Power SW(low when press Power key)
- 3: Vcc(5V)
- 4: GND
-
-
-Commands
---------
- ADB command is 1byte and consists of 4bit-address, 2bit-command
- type and 2bit-register. The commands are always sent by Host.
-
- Command format:
- 7 6 5 4 3 2 1 0
- | | | |------------ address
- | |-------- command type
- | |---- register
-
- bits commands
- ------------------------------------------------------
- - - - - 0 0 0 0 Send Reset(reset all devices)
- A A A A 0 0 0 1 Flush(reset a device)
- - - - - 0 0 1 0 Reserved
- - - - - 0 0 1 1 Reserved
- - - - - 0 1 - - Reserved
- A A A A 1 0 R R Listen(write to a device)
- A A A A 1 1 R R Talk(read from a device)
-
- The command to read keycodes from keyboard is 0x2C which
- consist of keyboard address 2 and Talk against register 0.
-
- Address:
- 2: keyboard
- 3: mice
-
- Registers:
- 0: application(keyboard uses this to store its data.)
- 1: application
- 2: application(keyboard uses this for LEDs and state of modifiers)
- 3: status and command
-
-
-Communication
--------------
- This is a minimum information for keyboard communication.
- See "Resources" for detail.
-
- Signaling:
-
- ~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
-
- |800us | |7 Command 0| | | |15-64 Data 0|Stopbit(0)
- +Attention | | | +Startbit(1)
- +Startbit(1) | +Tlt(140-260us)
- +stopbit(0)
-
- Bit cells:
-
- bit0: ______~~~
- 65 :35us
-
- bit1: ___~~~~~~
- 35 :65us
-
- bit0 low time: 60-70% of bit cell(42-91us)
- bit1 low time: 30-40% of bit cell(21-52us)
- bit cell time: 70-130us
- [from Apple IIgs Hardware Reference Second Edition]
-
- Criterion for bit0/1:
- After 55us if line is low/high then bit is 0/1.
-
- Attention & start bit:
- Host asserts low in 560-1040us then places start bit(1).
-
- Tlt(Stop to Start):
- Bus stays high in 140-260us then device places start bit(1).
-
- Global reset:
- Host asserts low in 2.8-5.2ms. All devices are forced to reset.
-
- Service request from device(Srq):
- Device can request to send at commad(Global only?) stop bit.
- Requesting device keeps low for 140-260us at stop bit of command.
-
-
-Keyboard Data(Register0)
- This 16bit data can contains two keycodes and two released flags.
- First keycode is palced in upper byte. When one keyocode is sent,
- lower byte is 0xFF.
- Release flag is 1 when key is released.
-
- 1514 . . . . . 8 7 6 . . . . . 0
- | | | | | | | | | +-+-+-+-+-+-+- Keycode2
- | | | | | | | | +--------------- Released2(1 when the key is released)
- | +-+-+-+-+-+-+----------------- Keycode1
- +------------------------------- Released1(1 when the key is released)
-
- Keycodes:
- Scancode consists of 7bit keycode and 1bit release flag.
- Device can send two keycodes at once. If just one keycode is sent
- keycode1 contains it and keyocode2 is 0xFF.
-
- Power switch:
- You can read the state from PSW line(active low) however
- the switch has a special scancode 0x7F7F, so you can
- also read from Data line. It uses 0xFFFF for release scancode.
-
-Keyboard LEDs & state of keys(Register2)
- This register hold current state of three LEDs and nine keys.
- The state of LEDs can be changed by sending Listen command.
-
- 1514 . . . . . . 7 6 5 . 3 2 1 0
- | | | | | | | | | | | | | | | +- LED1(NumLock)
- | | | | | | | | | | | | | | +--- LED2(CapsLock)
- | | | | | | | | | | | | | +----- LED3(ScrollLock)
- | | | | | | | | | | +-+-+------- Reserved
- | | | | | | | | | +------------- ScrollLock
- | | | | | | | | +--------------- NumLock
- | | | | | | | +----------------- Apple/Command
- | | | | | | +------------------- Option
- | | | | | +--------------------- Shift
- | | | | +----------------------- Control
- | | | +------------------------- Reset/Power
- | | +--------------------------- CapsLock
- | +----------------------------- Delete
- +------------------------------- Reserved
-
-Address, Handler ID and bits(Register3)
- 1514131211 . . 8 7 . . . . . . 0
- | | | | | | | | | | | | | | | |
- | | | | | | | | +-+-+-+-+-+-+-+- Handler ID
- | | | | +-+-+-+----------------- Address
- | | | +------------------------- 0
- | | +--------------------------- Service request enable(1 = enabled)
- | +----------------------------- Exceptional event(alwyas 1 if not used)
- +------------------------------- 0
-
-ADB Bit Cells
- bit cell time: 70-130us
- low part of bit0: 60-70% of bit cell
- low part of bit1: 30-40% of bit cell
-
- bit cell time 70us 130us
- --------------------------------------------
- low part of bit0 42-49 78-91
- high part of bit0 21-28 39-52
- low part of bit1 21-28 39-52
- high part of bit1 42-49 78-91
-
-
- bit0:
- 70us bit cell:
- ____________~~~~~~
- 42-49 21-28
-
- 130us bit cell:
- ____________~~~~~~
- 78-91 39-52
-
- bit1:
- 70us bit cell:
- ______~~~~~~~~~~~~
- 21-28 42-49
-
- 130us bit cell:
- ______~~~~~~~~~~~~
- 39-52 78-91
-
- [from Apple IIgs Hardware Reference Second Edition]
-
-Keyboard Handle ID
- Apple Standard Keyboard M0116: 0x01
- Apple Extended Keyboard M0115: 0x02
- Apple Extended Keyboard II M3501: 0x02
- Apple Adjustable Keybaord: 0x10
-
- http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802
-
-END_OF_ADB
-*/
diff --git a/tmk_core/protocol/adb.h b/tmk_core/protocol/adb.h
deleted file mode 100644
index fe8becc2d5..0000000000
--- a/tmk_core/protocol/adb.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#if !(defined(ADB_PORT) && defined(ADB_PIN) && defined(ADB_DDR) && defined(ADB_DATA_BIT))
-# error "ADB port setting is required in config.h"
-#endif
-
-#define ADB_POWER 0x7F
-#define ADB_CAPS 0x39
-
-/* ADB commands */
-// Default Address
-#define ADB_ADDR_0 0
-#define ADB_ADDR_DONGLE 1
-#define ADB_ADDR_KEYBOARD 2
-#define ADB_ADDR_MOUSE 3
-#define ADB_ADDR_TABLET 4
-#define ADB_ADDR_APPLIANCE 7
-#define ADB_ADDR_8 8
-#define ADB_ADDR_9 9
-#define ADB_ADDR_10 10
-#define ADB_ADDR_11 11
-#define ADB_ADDR_12 12
-#define ADB_ADDR_13 13
-#define ADB_ADDR_14 14
-#define ADB_ADDR_15 15
-// for temporary purpose, do not use for polling
-#define ADB_ADDR_TMP 15
-#define ADB_ADDR_MOUSE_POLL 10
-// Command Type
-#define ADB_CMD_RESET 0
-#define ADB_CMD_FLUSH 1
-#define ADB_CMD_LISTEN 8
-#define ADB_CMD_TALK 12
-// Register
-#define ADB_REG_0 0
-#define ADB_REG_1 1
-#define ADB_REG_2 2
-#define ADB_REG_3 3
-
-/* ADB keyboard handler id */
-#define ADB_HANDLER_STD 0x01 /* IIGS, M0116 */
-#define ADB_HANDLER_AEK 0x02 /* M0115, M3501 */
-#define ADB_HANDLER_AEK_RMOD 0x03 /* M0115, M3501, alternate mode enableing right modifiers */
-#define ADB_HANDLER_STD_ISO 0x04 /* M0118, ISO swapping keys */
-#define ADB_HANDLER_AEK_ISO 0x05 /* M0115, M3501, ISO swapping keys */
-#define ADB_HANDLER_M1242_ANSI 0x10 /* Adjustable keyboard */
-#define ADB_HANDLER_CLASSIC1_MOUSE 0x01
-#define ADB_HANDLER_CLASSIC2_MOUSE 0x02
-#define ADB_HANDLER_EXTENDED_MOUSE 0x04
-#define ADB_HANDLER_TURBO_MOUSE 0x32
-
-// ADB host
-void adb_host_init(void);
-bool adb_host_psw(void);
-uint16_t adb_host_talk(uint8_t addr, uint8_t reg);
-uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
-void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l);
-void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
-void adb_host_flush(uint8_t addr);
-void adb_host_kbd_led(uint8_t led);
-uint16_t adb_host_kbd_recv(void);
-uint16_t adb_host_mouse_recv(void);
-
-// ADB Mouse
-void adb_mouse_task(void);
-void adb_mouse_init(void);
diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c
index 78a2e3fcbb..c860328c80 100644
--- a/tmk_core/protocol/chibios/chibios.c
+++ b/tmk_core/protocol/chibios/chibios.c
@@ -27,6 +27,7 @@
#include "keyboard.h"
#include "action.h"
#include "action_util.h"
+#include "usb_device_state.h"
#include "mousekey.h"
#include "led.h"
#include "sendchar.h"
@@ -42,12 +43,6 @@
#ifdef SLEEP_LED_ENABLE
# include "sleep_led.h"
#endif
-#ifdef SERIAL_LINK_ENABLE
-# include "serial_link/system/serial_link.h"
-#endif
-#ifdef VISUALIZER_ENABLE
-# include "visualizer/visualizer.h"
-#endif
#ifdef MIDI_ENABLE
# include "qmk_midi.h"
#endif
@@ -139,6 +134,8 @@ void boardInit(void) {
}
void protocol_setup(void) {
+ usb_device_state_init();
+
// TESTING
// chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
@@ -154,19 +151,11 @@ void protocol_init(void) {
setup_midi();
#endif
-#ifdef SERIAL_LINK_ENABLE
- init_serial_link();
-#endif
-
-#ifdef VISUALIZER_ENABLE
- visualizer_init();
-#endif
-
host_driver_t *driver = NULL;
- /* Wait until the USB or serial link is active */
+ /* Wait until USB is active */
while (true) {
-#if defined(WAIT_FOR_USB) || defined(SERIAL_LINK_ENABLE)
+#if defined(WAIT_FOR_USB)
if (USB_DRIVER.state == USB_ACTIVE) {
driver = &chibios_driver;
break;
@@ -175,13 +164,6 @@ void protocol_init(void) {
driver = &chibios_driver;
break;
#endif
-#ifdef SERIAL_LINK_ENABLE
- if (is_serial_link_connected()) {
- driver = get_serial_link_driver();
- break;
- }
- serial_link_update();
-#endif
wait_ms(50);
}
@@ -211,14 +193,8 @@ void protocol_task(void) {
#if !defined(NO_USB_STARTUP_CHECK)
if (USB_DRIVER.state == USB_SUSPENDED) {
print("[s]");
-# ifdef VISUALIZER_ENABLE
- visualizer_suspend();
-# endif
while (USB_DRIVER.state == USB_SUSPENDED) {
/* Do this in the suspended state */
-# ifdef SERIAL_LINK_ENABLE
- serial_link_update();
-# endif
suspend_power_down(); // on AVR this deep sleeps for 15ms
/* Remote wakeup */
if (suspend_wakeup_condition()) {
@@ -232,10 +208,6 @@ void protocol_task(void) {
# ifdef MOUSEKEY_ENABLE
mousekey_send();
# endif /* MOUSEKEY_ENABLE */
-
-# ifdef VISUALIZER_ENABLE
- visualizer_resume();
-# endif
}
#endif
diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c
index cc282e6a9b..9b139b3992 100644
--- a/tmk_core/protocol/chibios/usb_main.c
+++ b/tmk_core/protocol/chibios/usb_main.c
@@ -39,6 +39,7 @@
# include "led.h"
#endif
#include "wait.h"
+#include "usb_device_state.h"
#include "usb_descriptor.h"
#include "usb_driver.h"
@@ -412,6 +413,7 @@ static inline bool usb_event_queue_dequeue(usbevent_t *event) {
}
static inline void usb_event_suspend_handler(void) {
+ usb_device_state_set_suspend(USB_DRIVER.configuration != 0, USB_DRIVER.configuration);
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif /* SLEEP_LED_ENABLE */
@@ -419,6 +421,7 @@ static inline void usb_event_suspend_handler(void) {
static inline void usb_event_wakeup_handler(void) {
suspend_wakeup_init();
+ usb_device_state_set_resume(USB_DRIVER.configuration != 0, USB_DRIVER.configuration);
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
// NOTE: converters may not accept this
@@ -440,6 +443,15 @@ void usb_event_queue_task(void) {
last_suspend_state = false;
usb_event_wakeup_handler();
break;
+ case USB_EVENT_CONFIGURED:
+ usb_device_state_set_configuration(USB_DRIVER.configuration != 0, USB_DRIVER.configuration);
+ break;
+ case USB_EVENT_UNCONFIGURED:
+ usb_device_state_set_configuration(false, 0);
+ break;
+ case USB_EVENT_RESET:
+ usb_device_state_set_reset();
+ break;
default:
// Nothing to do, we don't handle it.
break;
@@ -482,13 +494,14 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) {
if (last_suspend_state) {
usb_event_queue_enqueue(USB_EVENT_WAKEUP);
}
+ usb_event_queue_enqueue(USB_EVENT_CONFIGURED);
return;
case USB_EVENT_SUSPEND:
- usb_event_queue_enqueue(USB_EVENT_SUSPEND);
/* Falls into.*/
case USB_EVENT_UNCONFIGURED:
/* Falls into.*/
case USB_EVENT_RESET:
+ usb_event_queue_enqueue(event);
for (int i = 0; i < NUM_USB_DRIVERS; i++) {
chSysLockFromISR();
/* Disconnection event on suspend.*/
diff --git a/tmk_core/protocol/ibm4704.c b/tmk_core/protocol/ibm4704.c
deleted file mode 100644
index a19443976e..0000000000
--- a/tmk_core/protocol/ibm4704.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
-Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com>
-*/
-#include <stdbool.h>
-#include <util/delay.h>
-#include "debug.h"
-#include "ring_buffer.h"
-#include "ibm4704.h"
-
-#define WAIT(stat, us, err) \
- do { \
- if (!wait_##stat(us)) { \
- ibm4704_error = err; \
- goto ERROR; \
- } \
- } while (0)
-
-uint8_t ibm4704_error = 0;
-
-void ibm4704_init(void) {
- inhibit(); // keep keyboard from sending
- IBM4704_INT_INIT();
- IBM4704_INT_ON();
- idle(); // allow keyboard sending
-}
-
-/*
-Host to Keyboard
-----------------
-Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part.
-
- ____ __ __ __ __ __ __ __ __ __ ________
-Clock \______/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
- ^ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ___
-Data ____|__/ X____X____X____X____X____X____X____X____X____X \___
- | Start 0 1 2 3 4 5 6 7 P Stop
- Request by host
-
-Start bit: can be long as 300-350us.
-Request: Host pulls Clock line down to request to send a command.
-Timing: After Request keyboard pull up Data and down Clock line to low for start bit.
- After request host release Clock line once Data line becomes hi.
- Host writes a bit while Clock is hi and Keyboard reads while low.
-Stop bit: Host releases or pulls up Data line to hi after 9th clock and waits for keyboard pull down the line to lo.
-*/
-uint8_t ibm4704_send(uint8_t data) {
- bool parity = true; // odd parity
- ibm4704_error = 0;
-
- IBM4704_INT_OFF();
-
- /* Request to send */
- idle();
- clock_lo();
-
- /* wait for Start bit(Clock:lo/Data:hi) */
- WAIT(data_hi, 300, 0x30);
-
- /* Data bit */
- for (uint8_t i = 0; i < 8; i++) {
- WAIT(clock_hi, 100, 0x40 + i);
- if (data & (1 << i)) {
- parity = !parity;
- data_hi();
- } else {
- data_lo();
- }
- WAIT(clock_lo, 100, 0x48 + i);
- }
-
- /* Parity bit */
- WAIT(clock_hi, 100, 0x34);
- if (parity) {
- data_hi();
- } else {
- data_lo();
- }
- WAIT(clock_lo, 100, 0x35);
-
- /* Stop bit */
- WAIT(clock_hi, 100, 0x34);
- data_hi();
-
- /* End */
- WAIT(data_lo, 100, 0x36);
-
- idle();
- IBM4704_INT_ON();
- return 0;
-ERROR:
- idle();
- if (ibm4704_error > 0x30) {
- xprintf("S:%02X ", ibm4704_error);
- }
- IBM4704_INT_ON();
- return -1;
-}
-
-/* wait forever to receive data */
-uint8_t ibm4704_recv_response(void) {
- while (!rbuf_has_data()) {
- _delay_ms(1);
- }
- return rbuf_dequeue();
-}
-
-uint8_t ibm4704_recv(void) {
- if (rbuf_has_data()) {
- return rbuf_dequeue();
- } else {
- return -1;
- }
-}
-
-/*
-Keyboard to Host
-----------------
-Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part.
-
- ____ __ __ __ __ __ __ __ __ __ _______
-Clock \_____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
- ____ ____ ____ ____ ____ ____ ____ ____ ____ ____
-Data ____/ X____X____X____X____X____X____X____X____X____X________
- Start 0 1 2 3 4 5 6 7 P Stop
-
-Start bit: can be long as 300-350us.
-Inhibit: Pull Data line down to inhibit keyboard to send.
-Timing: Host reads bit while Clock is hi.(rising edge)
-Stop bit: Keyboard pulls down Data line to lo after 9th clock.
-*/
-ISR(IBM4704_INT_VECT) {
- static enum { BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, PARITY, STOP } state = BIT0;
- // LSB first
- static uint8_t data = 0;
- // Odd parity
- static uint8_t parity = false;
-
- ibm4704_error = 0;
-
- switch (state) {
- case BIT0:
- case BIT1:
- case BIT2:
- case BIT3:
- case BIT4:
- case BIT5:
- case BIT6:
- case BIT7:
- data >>= 1;
- if (data_in()) {
- data |= 0x80;
- parity = !parity;
- }
- break;
- case PARITY:
- if (data_in()) {
- parity = !parity;
- }
- if (!parity) goto ERROR;
- break;
- case STOP:
- // Data:Low
- WAIT(data_lo, 100, state);
- if (!rbuf_enqueue(data)) {
- print("rbuf: full\n");
- }
- ibm4704_error = IBM4704_ERR_NONE;
- goto DONE;
- break;
- default:
- goto ERROR;
- }
- state++;
- goto RETURN;
-ERROR:
- ibm4704_error = state;
- while (ibm4704_send(0xFE)) _delay_ms(1); // resend
- xprintf("R:%02X%02X\n", state, data);
-DONE:
- state = BIT0;
- data = 0;
- parity = false;
-RETURN:
- return;
-}
diff --git a/tmk_core/protocol/ibm4704.h b/tmk_core/protocol/ibm4704.h
deleted file mode 100644
index 4f88d148b3..0000000000
--- a/tmk_core/protocol/ibm4704.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-Copyright 2014 Jun WAKO <wakojun@gmail.com>
-*/
-
-#pragma once
-
-#define IBM4704_ERR_NONE 0
-#define IBM4704_ERR_PARITY 0x70
-
-void ibm4704_init(void);
-uint8_t ibm4704_send(uint8_t data);
-uint8_t ibm4704_recv_response(void);
-uint8_t ibm4704_recv(void);
-
-/* Check pin configuration */
-#if !(defined(IBM4704_CLOCK_PORT) && defined(IBM4704_CLOCK_PIN) && defined(IBM4704_CLOCK_DDR) && defined(IBM4704_CLOCK_BIT))
-# error "ibm4704 clock pin configuration is required in config.h"
-#endif
-
-#if !(defined(IBM4704_DATA_PORT) && defined(IBM4704_DATA_PIN) && defined(IBM4704_DATA_DDR) && defined(IBM4704_DATA_BIT))
-# error "ibm4704 data pin configuration is required in config.h"
-#endif
-
-/*--------------------------------------------------------------------
- * static functions
- *------------------------------------------------------------------*/
-static inline void clock_lo(void) {
- IBM4704_CLOCK_PORT &= ~(1 << IBM4704_CLOCK_BIT);
- IBM4704_CLOCK_DDR |= (1 << IBM4704_CLOCK_BIT);
-}
-static inline void clock_hi(void) {
- /* input with pull up */
- IBM4704_CLOCK_DDR &= ~(1 << IBM4704_CLOCK_BIT);
- IBM4704_CLOCK_PORT |= (1 << IBM4704_CLOCK_BIT);
-}
-static inline bool clock_in(void) {
- IBM4704_CLOCK_DDR &= ~(1 << IBM4704_CLOCK_BIT);
- IBM4704_CLOCK_PORT |= (1 << IBM4704_CLOCK_BIT);
- _delay_us(1);
- return IBM4704_CLOCK_PIN & (1 << IBM4704_CLOCK_BIT);
-}
-static inline void data_lo(void) {
- IBM4704_DATA_PORT &= ~(1 << IBM4704_DATA_BIT);
- IBM4704_DATA_DDR |= (1 << IBM4704_DATA_BIT);
-}
-static inline void data_hi(void) {
- /* input with pull up */
- IBM4704_DATA_DDR &= ~(1 << IBM4704_DATA_BIT);
- IBM4704_DATA_PORT |= (1 << IBM4704_DATA_BIT);
-}
-static inline bool data_in(void) {
- IBM4704_DATA_DDR &= ~(1 << IBM4704_DATA_BIT);
- IBM4704_DATA_PORT |= (1 << IBM4704_DATA_BIT);
- _delay_us(1);
- return IBM4704_DATA_PIN & (1 << IBM4704_DATA_BIT);
-}
-
-static inline uint16_t wait_clock_lo(uint16_t us) {
- while (clock_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_clock_hi(uint16_t us) {
- while (!clock_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_data_lo(uint16_t us) {
- while (data_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_data_hi(uint16_t us) {
- while (!data_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-
-/* idle state that device can send */
-static inline void idle(void) {
- clock_hi();
- data_hi();
-}
-
-/* inhibit device to send
- * keyboard checks Data line on start bit(Data:hi) and it stops sending if Data line is low.
- */
-static inline void inhibit(void) {
- clock_hi();
- data_lo();
-}
diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa.mk
index c8935dacb7..00fec478ac 100644
--- a/tmk_core/protocol/lufa.mk
+++ b/tmk_core/protocol/lufa.mk
@@ -3,7 +3,6 @@ LUFA_DIR = protocol/lufa
# Path to the LUFA library
LUFA_PATH = $(LIB_PATH)/lufa
-
# Create the LUFA source path variables by including the LUFA makefile
ifneq (, $(wildcard $(LUFA_PATH)/LUFA/Build/lufa_sources.mk))
# New build system from 20120730
@@ -22,23 +21,6 @@ ifeq ($(strip $(MIDI_ENABLE)), yes)
include $(TMK_PATH)/protocol/midi.mk
endif
-ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
- LUFA_SRC += outputselect.c \
- $(TMK_DIR)/protocol/serial_uart.c
-endif
-
-ifeq ($(strip $(BLUETOOTH)), AdafruitBLE)
- LUFA_SRC += spi_master.c \
- analog.c \
- outputselect.c \
- $(LUFA_DIR)/adafruit_ble.cpp
-endif
-
-ifeq ($(strip $(BLUETOOTH)), RN42)
- LUFA_SRC += outputselect.c \
- $(TMK_DIR)/protocol/serial_uart.c
-endif
-
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
LUFA_SRC += $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c
endif
@@ -50,19 +32,10 @@ SRC += $(LUFA_DIR)/usb_util.c
VPATH += $(TMK_PATH)/$(LUFA_DIR)
VPATH += $(LUFA_PATH)
-# Option modules
-#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
-#endif
-
-#ifdef EXTRAKEY_ENABLE
-#endif
-
# LUFA library compile-time options and predefined tokens
LUFA_OPTS = -DUSB_DEVICE_ONLY
LUFA_OPTS += -DUSE_FLASH_DESCRIPTORS
LUFA_OPTS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-#LUFA_OPTS += -DINTERRUPT_CONTROL_ENDPOINT
-LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -DFIXED_NUM_CONFIGURATIONS=1
diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp
deleted file mode 100644
index 3f2cc35734..0000000000
--- a/tmk_core/protocol/lufa/adafruit_ble.cpp
+++ /dev/null
@@ -1,701 +0,0 @@
-#include "adafruit_ble.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <alloca.h>
-#include "debug.h"
-#include "timer.h"
-#include "action_util.h"
-#include "ringbuffer.hpp"
-#include <string.h>
-#include "spi_master.h"
-#include "wait.h"
-#include "analog.h"
-#include "progmem.h"
-
-// These are the pin assignments for the 32u4 boards.
-// You may define them to something else in your config.h
-// if yours is wired up differently.
-#ifndef AdafruitBleResetPin
-# define AdafruitBleResetPin D4
-#endif
-
-#ifndef AdafruitBleCSPin
-# define AdafruitBleCSPin B4
-#endif
-
-#ifndef AdafruitBleIRQPin
-# define AdafruitBleIRQPin E6
-#endif
-
-#ifndef AdafruitBleSpiClockSpeed
-# define AdafruitBleSpiClockSpeed 4000000UL // SCK frequency
-#endif
-
-#define SCK_DIVISOR (F_CPU / AdafruitBleSpiClockSpeed)
-
-#define SAMPLE_BATTERY
-#define ConnectionUpdateInterval 1000 /* milliseconds */
-
-#ifndef BATTERY_LEVEL_PIN
-# define BATTERY_LEVEL_PIN B5
-#endif
-
-static struct {
- bool is_connected;
- bool initialized;
- bool configured;
-
-#define ProbedEvents 1
-#define UsingEvents 2
- bool event_flags;
-
-#ifdef SAMPLE_BATTERY
- uint16_t last_battery_update;
- uint32_t vbat;
-#endif
- uint16_t last_connection_update;
-} state;
-
-// Commands are encoded using SDEP and sent via SPI
-// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md
-
-#define SdepMaxPayload 16
-struct sdep_msg {
- uint8_t type;
- uint8_t cmd_low;
- uint8_t cmd_high;
- struct __attribute__((packed)) {
- uint8_t len : 7;
- uint8_t more : 1;
- };
- uint8_t payload[SdepMaxPayload];
-} __attribute__((packed));
-
-// The recv latency is relatively high, so when we're hammering keys quickly,
-// we want to avoid waiting for the responses in the matrix loop. We maintain
-// a short queue for that. Since there is quite a lot of space overhead for
-// the AT command representation wrapped up in SDEP, we queue the minimal
-// information here.
-
-enum queue_type {
- QTKeyReport, // 1-byte modifier + 6-byte key report
- QTConsumer, // 16-bit key code
-#ifdef MOUSE_ENABLE
- QTMouseMove, // 4-byte mouse report
-#endif
-};
-
-struct queue_item {
- enum queue_type queue_type;
- uint16_t added;
- union __attribute__((packed)) {
- struct __attribute__((packed)) {
- uint8_t modifier;
- uint8_t keys[6];
- } key;
-
- uint16_t consumer;
- struct __attribute__((packed)) {
- int8_t x, y, scroll, pan;
- uint8_t buttons;
- } mousemove;
- };
-};
-
-// Items that we wish to send
-static RingBuffer<queue_item, 40> send_buf;
-// Pending response; while pending, we can't send any more requests.
-// This records the time at which we sent the command for which we
-// are expecting a response.
-static RingBuffer<uint16_t, 2> resp_buf;
-
-static bool process_queue_item(struct queue_item *item, uint16_t timeout);
-
-enum sdep_type {
- SdepCommand = 0x10,
- SdepResponse = 0x20,
- SdepAlert = 0x40,
- SdepError = 0x80,
- SdepSlaveNotReady = 0xFE, // Try again later
- SdepSlaveOverflow = 0xFF, // You read more data than is available
-};
-
-enum ble_cmd {
- BleInitialize = 0xBEEF,
- BleAtWrapper = 0x0A00,
- BleUartTx = 0x0A01,
- BleUartRx = 0x0A02,
-};
-
-enum ble_system_event_bits {
- BleSystemConnected = 0,
- BleSystemDisconnected = 1,
- BleSystemUartRx = 8,
- BleSystemMidiRx = 10,
-};
-
-#define SdepTimeout 150 /* milliseconds */
-#define SdepShortTimeout 10 /* milliseconds */
-#define SdepBackOff 25 /* microseconds */
-#define BatteryUpdateInterval 10000 /* milliseconds */
-
-static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout);
-static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false);
-
-// Send a single SDEP packet
-static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) {
- spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
- uint16_t timerStart = timer_read();
- bool success = false;
- bool ready = false;
-
- do {
- ready = spi_write(msg->type) != SdepSlaveNotReady;
- if (ready) {
- break;
- }
-
- // Release it and let it initialize
- spi_stop();
- wait_us(SdepBackOff);
- spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
- } while (timer_elapsed(timerStart) < timeout);
-
- if (ready) {
- // Slave is ready; send the rest of the packet
- spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len);
- success = true;
- }
-
- spi_stop();
-
- return success;
-}
-
-static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) {
- msg->type = SdepCommand;
- msg->cmd_low = command & 0xFF;
- msg->cmd_high = command >> 8;
- msg->len = len;
- msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0;
-
- static_assert(sizeof(*msg) == 20, "msg is correctly packed");
-
- memcpy(msg->payload, payload, len);
-}
-
-// Read a single SDEP packet
-static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) {
- bool success = false;
- uint16_t timerStart = timer_read();
- bool ready = false;
-
- do {
- ready = readPin(AdafruitBleIRQPin);
- if (ready) {
- break;
- }
- wait_us(1);
- } while (timer_elapsed(timerStart) < timeout);
-
- if (ready) {
- spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
-
- do {
- // Read the command type, waiting for the data to be ready
- msg->type = spi_read();
- if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) {
- // Release it and let it initialize
- spi_stop();
- wait_us(SdepBackOff);
- spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR);
- continue;
- }
-
- // Read the rest of the header
- spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)));
-
- // and get the payload if there is any
- if (msg->len <= SdepMaxPayload) {
- spi_receive(msg->payload, msg->len);
- }
- success = true;
- break;
- } while (timer_elapsed(timerStart) < timeout);
-
- spi_stop();
- }
- return success;
-}
-
-static void resp_buf_read_one(bool greedy) {
- uint16_t last_send;
- if (!resp_buf.peek(last_send)) {
- return;
- }
-
- if (readPin(AdafruitBleIRQPin)) {
- struct sdep_msg msg;
-
- again:
- if (sdep_recv_pkt(&msg, SdepTimeout)) {
- if (!msg.more) {
- // We got it; consume this entry
- resp_buf.get(last_send);
- dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send));
- }
-
- if (greedy && resp_buf.peek(last_send) && readPin(AdafruitBleIRQPin)) {
- goto again;
- }
- }
-
- } else if (timer_elapsed(last_send) > SdepTimeout * 2) {
- dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size());
-
- // Timed out: consume this entry
- resp_buf.get(last_send);
- }
-}
-
-static void send_buf_send_one(uint16_t timeout = SdepTimeout) {
- struct queue_item item;
-
- // Don't send anything more until we get an ACK
- if (!resp_buf.empty()) {
- return;
- }
-
- if (!send_buf.peek(item)) {
- return;
- }
- if (process_queue_item(&item, timeout)) {
- // commit that peek
- send_buf.get(item);
- dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size());
- } else {
- dprint("failed to send, will retry\n");
- wait_ms(SdepTimeout);
- resp_buf_read_one(true);
- }
-}
-
-static void resp_buf_wait(const char *cmd) {
- bool didPrint = false;
- while (!resp_buf.empty()) {
- if (!didPrint) {
- dprintf("wait on buf for %s\n", cmd);
- didPrint = true;
- }
- resp_buf_read_one(true);
- }
-}
-
-static bool ble_init(void) {
- state.initialized = false;
- state.configured = false;
- state.is_connected = false;
-
- setPinInput(AdafruitBleIRQPin);
-
- spi_init();
-
- // Perform a hardware reset
- setPinOutput(AdafruitBleResetPin);
- writePinHigh(AdafruitBleResetPin);
- writePinLow(AdafruitBleResetPin);
- wait_ms(10);
- writePinHigh(AdafruitBleResetPin);
-
- wait_ms(1000); // Give it a second to initialize
-
- state.initialized = true;
- return state.initialized;
-}
-
-static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; }
-
-static bool read_response(char *resp, uint16_t resplen, bool verbose) {
- char *dest = resp;
- char *end = dest + resplen;
-
- while (true) {
- struct sdep_msg msg;
-
- if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) {
- dprint("sdep_recv_pkt failed\n");
- return false;
- }
-
- if (msg.type != SdepResponse) {
- *resp = 0;
- return false;
- }
-
- uint8_t len = min(msg.len, end - dest);
- if (len > 0) {
- memcpy(dest, msg.payload, len);
- dest += len;
- }
-
- if (!msg.more) {
- // No more data is expected!
- break;
- }
- }
-
- // Ensure the response is NUL terminated
- *dest = 0;
-
- // "Parse" the result text; we want to snip off the trailing OK or ERROR line
- // Rewind past the possible trailing CRLF so that we can strip it
- --dest;
- while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) {
- *dest = 0;
- --dest;
- }
-
- // Look back for start of preceeding line
- char *last_line = strrchr(resp, '\n');
- if (last_line) {
- ++last_line;
- } else {
- last_line = resp;
- }
-
- bool success = false;
- static const char kOK[] PROGMEM = "OK";
-
- success = !strcmp_P(last_line, kOK);
-
- if (verbose || !success) {
- dprintf("result: %s\n", resp);
- }
- return success;
-}
-
-static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) {
- const char * end = cmd + strlen(cmd);
- struct sdep_msg msg;
-
- if (verbose) {
- dprintf("ble send: %s\n", cmd);
- }
-
- if (resp) {
- // They want to decode the response, so we need to flush and wait
- // for all pending I/O to finish before we start this one, so
- // that we don't confuse the results
- resp_buf_wait(cmd);
- *resp = 0;
- }
-
- // Fragment the command into a series of SDEP packets
- while (end - cmd > SdepMaxPayload) {
- sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true);
- if (!sdep_send_pkt(&msg, timeout)) {
- return false;
- }
- cmd += SdepMaxPayload;
- }
-
- sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false);
- if (!sdep_send_pkt(&msg, timeout)) {
- return false;
- }
-
- if (resp == NULL) {
- uint16_t now = timer_read();
- while (!resp_buf.enqueue(now)) {
- resp_buf_read_one(false);
- }
- uint16_t later = timer_read();
- if (TIMER_DIFF_16(later, now) > 0) {
- dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now));
- }
- return true;
- }
-
- return read_response(resp, resplen, verbose);
-}
-
-bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) {
- char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1);
- strcpy_P(cmdbuf, cmd);
- return at_command(cmdbuf, resp, resplen, verbose);
-}
-
-bool adafruit_ble_is_connected(void) { return state.is_connected; }
-
-bool adafruit_ble_enable_keyboard(void) {
- char resbuf[128];
-
- if (!state.initialized && !ble_init()) {
- return false;
- }
-
- state.configured = false;
-
- // Disable command echo
- static const char kEcho[] PROGMEM = "ATE=0";
- // Make the advertised name match the keyboard
- static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT);
- // Turn on keyboard support
- static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1";
-
- // Adjust intervals to improve latency. This causes the "central"
- // system (computer/tablet) to poll us every 10-30 ms. We can't
- // set a smaller value than 10ms, and 30ms seems to be the natural
- // processing time on my macbook. Keeping it constrained to that
- // feels reasonable to type to.
- static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,";
-
- // Reset the device so that it picks up the above changes
- static const char kATZ[] PROGMEM = "ATZ";
-
- // Turn down the power level a bit
- static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12";
- static PGM_P const configure_commands[] PROGMEM = {
- kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ,
- };
-
- uint8_t i;
- for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) {
- PGM_P cmd;
- memcpy_P(&cmd, configure_commands + i, sizeof(cmd));
-
- if (!at_command_P(cmd, resbuf, sizeof(resbuf))) {
- dprintf("failed BLE command: %S: %s\n", cmd, resbuf);
- goto fail;
- }
- }
-
- state.configured = true;
-
- // Check connection status in a little while; allow the ATZ time
- // to kick in.
- state.last_connection_update = timer_read();
-fail:
- return state.configured;
-}
-
-static void set_connected(bool connected) {
- if (connected != state.is_connected) {
- if (connected) {
- dprint("BLE connected\n");
- } else {
- dprint("BLE disconnected\n");
- }
- state.is_connected = connected;
-
- // TODO: if modifiers are down on the USB interface and
- // we cut over to BLE or vice versa, they will remain stuck.
- // This feels like a good point to do something like clearing
- // the keyboard and/or generating a fake all keys up message.
- // However, I've noticed that it takes a couple of seconds
- // for macOS to to start recognizing key presses after BLE
- // is in the connected state, so I worry that doing that
- // here may not be good enough.
- }
-}
-
-void adafruit_ble_task(void) {
- char resbuf[48];
-
- if (!state.configured && !adafruit_ble_enable_keyboard()) {
- return;
- }
- resp_buf_read_one(true);
- send_buf_send_one(SdepShortTimeout);
-
- if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(AdafruitBleIRQPin)) {
- // Must be an event update
- if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) {
- uint32_t mask = strtoul(resbuf, NULL, 16);
-
- if (mask & BleSystemConnected) {
- set_connected(true);
- } else if (mask & BleSystemDisconnected) {
- set_connected(false);
- }
- }
- }
-
- if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) {
- bool shouldPoll = true;
- if (!(state.event_flags & ProbedEvents)) {
- // Request notifications about connection status changes.
- // This only works in SPIFRIEND firmware > 0.6.7, which is why
- // we check for this conditionally here.
- // Note that at the time of writing, HID reports only work correctly
- // with Apple products on firmware version 0.6.7!
- // https://forums.adafruit.com/viewtopic.php?f=8&t=104052
- if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) {
- at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf));
- state.event_flags |= UsingEvents;
- }
- state.event_flags |= ProbedEvents;
-
- // leave shouldPoll == true so that we check at least once
- // before relying solely on events
- } else {
- shouldPoll = false;
- }
-
- static const char kGetConn[] PROGMEM = "AT+GAPGETCONN";
- state.last_connection_update = timer_read();
-
- if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) {
- set_connected(atoi(resbuf));
- }
- }
-
-#ifdef SAMPLE_BATTERY
- if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) {
- state.last_battery_update = timer_read();
-
- state.vbat = analogReadPin(BATTERY_LEVEL_PIN);
- }
-#endif
-}
-
-static bool process_queue_item(struct queue_item *item, uint16_t timeout) {
- char cmdbuf[48];
- char fmtbuf[64];
-
- // Arrange to re-check connection after keys have settled
- state.last_connection_update = timer_read();
-
-#if 1
- if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) {
- dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added));
- }
-#endif
-
- switch (item->queue_type) {
- case QTKeyReport:
- strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x"));
- snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]);
- return at_command(cmdbuf, NULL, 0, true, timeout);
-
- case QTConsumer:
- strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x"));
- snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer);
- return at_command(cmdbuf, NULL, 0, true, timeout);
-
-#ifdef MOUSE_ENABLE
- case QTMouseMove:
- strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d"));
- snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan);
- if (!at_command(cmdbuf, NULL, 0, true, timeout)) {
- return false;
- }
- strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON="));
- if (item->mousemove.buttons & MOUSE_BTN1) {
- strcat(cmdbuf, "L");
- }
- if (item->mousemove.buttons & MOUSE_BTN2) {
- strcat(cmdbuf, "R");
- }
- if (item->mousemove.buttons & MOUSE_BTN3) {
- strcat(cmdbuf, "M");
- }
- if (item->mousemove.buttons == 0) {
- strcat(cmdbuf, "0");
- }
- return at_command(cmdbuf, NULL, 0, true, timeout);
-#endif
- default:
- return true;
- }
-}
-
-void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) {
- struct queue_item item;
- bool didWait = false;
-
- item.queue_type = QTKeyReport;
- item.key.modifier = hid_modifier_mask;
- item.added = timer_read();
-
- while (nkeys >= 0) {
- item.key.keys[0] = keys[0];
- item.key.keys[1] = nkeys >= 1 ? keys[1] : 0;
- item.key.keys[2] = nkeys >= 2 ? keys[2] : 0;
- item.key.keys[3] = nkeys >= 3 ? keys[3] : 0;
- item.key.keys[4] = nkeys >= 4 ? keys[4] : 0;
- item.key.keys[5] = nkeys >= 5 ? keys[5] : 0;
-
- if (!send_buf.enqueue(item)) {
- if (!didWait) {
- dprint("wait for buf space\n");
- didWait = true;
- }
- send_buf_send_one();
- continue;
- }
-
- if (nkeys <= 6) {
- return;
- }
-
- nkeys -= 6;
- keys += 6;
- }
-}
-
-void adafruit_ble_send_consumer_key(uint16_t usage) {
- struct queue_item item;
-
- item.queue_type = QTConsumer;
- item.consumer = usage;
-
- while (!send_buf.enqueue(item)) {
- send_buf_send_one();
- }
-}
-
-#ifdef MOUSE_ENABLE
-void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) {
- struct queue_item item;
-
- item.queue_type = QTMouseMove;
- item.mousemove.x = x;
- item.mousemove.y = y;
- item.mousemove.scroll = scroll;
- item.mousemove.pan = pan;
- item.mousemove.buttons = buttons;
-
- while (!send_buf.enqueue(item)) {
- send_buf_send_one();
- }
-}
-#endif
-
-uint32_t adafruit_ble_read_battery_voltage(void) { return state.vbat; }
-
-bool adafruit_ble_set_mode_leds(bool on) {
- if (!state.configured) {
- return false;
- }
-
- // The "mode" led is the red blinky one
- at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0);
-
- // Pin 19 is the blue "connected" LED; turn that off too.
- // When turning LEDs back on, don't turn that LED on if we're
- // not connected, as that would be confusing.
- at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0);
- return true;
-}
-
-// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel
-bool adafruit_ble_set_power_level(int8_t level) {
- char cmd[46];
- if (!state.configured) {
- return false;
- }
- snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level);
- return at_command(cmd, NULL, 0, false);
-}
diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/tmk_core/protocol/lufa/adafruit_ble.h
deleted file mode 100644
index b43e0771d9..0000000000
--- a/tmk_core/protocol/lufa/adafruit_ble.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Bluetooth Low Energy Protocol for QMK.
- * Author: Wez Furlong, 2016
- * Supports the Adafruit BLE board built around the nRF51822 chip.
- */
-
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <string.h>
-
-#include "config_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Instruct the module to enable HID keyboard support and reset */
-extern bool adafruit_ble_enable_keyboard(void);
-
-/* Query to see if the BLE module is connected */
-extern bool adafruit_ble_query_is_connected(void);
-
-/* Returns true if we believe that the BLE module is connected.
- * This uses our cached understanding that is maintained by
- * calling ble_task() periodically. */
-extern bool adafruit_ble_is_connected(void);
-
-/* Call this periodically to process BLE-originated things */
-extern void adafruit_ble_task(void);
-
-/* Generates keypress events for a set of keys.
- * The hid modifier mask specifies the state of the modifier keys for
- * this set of keys.
- * Also sends a key release indicator, so that the keys do not remain
- * held down. */
-extern void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys);
-
-/* Send a consumer usage.
- * (milliseconds) */
-extern void adafruit_ble_send_consumer_key(uint16_t usage);
-
-#ifdef MOUSE_ENABLE
-/* Send a mouse/wheel movement report.
- * The parameters are signed and indicate positive or negative direction
- * change. */
-extern void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons);
-#endif
-
-/* Compute battery voltage by reading an analog pin.
- * Returns the integer number of millivolts */
-extern uint32_t adafruit_ble_read_battery_voltage(void);
-
-extern bool adafruit_ble_set_mode_leds(bool on);
-extern bool adafruit_ble_set_power_level(int8_t level);
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c
index 5b56e8a03c..753762358d 100644
--- a/tmk_core/protocol/lufa/lufa.c
+++ b/tmk_core/protocol/lufa/lufa.c
@@ -52,6 +52,7 @@
#include "usb_descriptor.h"
#include "lufa.h"
#include "quantum.h"
+#include "usb_device_state.h"
#include <util/atomic.h>
#ifdef NKRO_ENABLE
@@ -142,7 +143,8 @@ static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
-host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer};
+static void send_programmable_button(uint32_t data);
+host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button};
#ifdef VIRTSER_ENABLE
// clang-format off
@@ -413,7 +415,10 @@ void EVENT_USB_Device_Disconnect(void) {
*
* FIXME: Needs doc
*/
-void EVENT_USB_Device_Reset(void) { print("[R]"); }
+void EVENT_USB_Device_Reset(void) {
+ print("[R]");
+ usb_device_state_set_reset();
+}
/** \brief Event USB Device Connect
*
@@ -421,6 +426,8 @@ void EVENT_USB_Device_Reset(void) { print("[R]"); }
*/
void EVENT_USB_Device_Suspend() {
print("[S]");
+ usb_device_state_set_suspend(USB_Device_ConfigurationNumber != 0, USB_Device_ConfigurationNumber);
+
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif
@@ -436,6 +443,8 @@ void EVENT_USB_Device_WakeUp() {
suspend_wakeup_init();
#endif
+ usb_device_state_set_resume(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber);
+
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
// NOTE: converters may not accept this
@@ -528,6 +537,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) {
/* Setup digitizer endpoint */
ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1);
#endif
+
+ usb_device_state_set_configuration(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber);
}
/* FIXME: Expose this table in the docs somehow
@@ -760,29 +771,35 @@ static void send_mouse(report_mouse_t *report) {
#endif
}
-/** \brief Send Extra
- *
- * FIXME: Needs doc
- */
-#ifdef EXTRAKEY_ENABLE
-static void send_extra(uint8_t report_id, uint16_t data) {
+#if defined(EXTRAKEY_ENABLE) || defined(PROGRAMMABLE_BUTTON_ENABLE)
+static void send_report(void *report, size_t size) {
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured) return;
- static report_extra_t r;
- r = (report_extra_t){.report_id = report_id, .usage = data};
Endpoint_SelectEndpoint(SHARED_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
- Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
+ Endpoint_Write_Stream_LE(report, size, NULL);
Endpoint_ClearIN();
}
#endif
+/** \brief Send Extra
+ *
+ * FIXME: Needs doc
+ */
+#ifdef EXTRAKEY_ENABLE
+static void send_extra(uint8_t report_id, uint16_t data) {
+ static report_extra_t r;
+ r = (report_extra_t){.report_id = report_id, .usage = data};
+ send_report(&r, sizeof(r));
+}
+#endif
+
/** \brief Send System
*
* FIXME: Needs doc
@@ -822,6 +839,14 @@ static void send_consumer(uint16_t data) {
#endif
}
+static void send_programmable_button(uint32_t data) {
+#ifdef PROGRAMMABLE_BUTTON_ENABLE
+ static report_programmable_button_t r;
+ r = (report_programmable_button_t){.report_id = REPORT_ID_PROGRAMMABLE_BUTTON, .usage = data};
+ send_report(&r, sizeof(r));
+#endif
+}
+
/*******************************************************************************
* sendchar
******************************************************************************/
@@ -1044,6 +1069,7 @@ void protocol_setup(void) {
#endif
setup_mcu();
+ usb_device_state_init();
keyboard_setup();
}
diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h
index 348a84c031..6a5205609e 100644
--- a/tmk_core/protocol/lufa/lufa.h
+++ b/tmk_core/protocol/lufa/lufa.h
@@ -56,14 +56,3 @@ extern host_driver_t lufa_driver;
#ifdef __cplusplus
}
#endif
-
-#ifdef API_ENABLE
-# include "api.h"
-#endif
-
-#ifdef API_SYSEX_ENABLE
-# include "api_sysex.h"
-// Allocate space for encoding overhead.
-// The header and terminator are not stored to save a few bytes of precious ram
-# define MIDI_SYSEX_BUFFER (API_SYSEX_MAX_SIZE + API_SYSEX_MAX_SIZE / 7 + (API_SYSEX_MAX_SIZE % 7 ? 1 : 0))
-#endif
diff --git a/tmk_core/protocol/lufa/outputselect.c b/tmk_core/protocol/lufa/outputselect.c
deleted file mode 100644
index f758c65280..0000000000
--- a/tmk_core/protocol/lufa/outputselect.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-Copyright 2017 Priyadi Iman Nurcahyo
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "outputselect.h"
-
-#if defined(PROTOCOL_LUFA)
-# include "lufa.h"
-#endif
-
-#ifdef MODULE_ADAFRUIT_BLE
-# include "adafruit_ble.h"
-#endif
-
-uint8_t desired_output = OUTPUT_DEFAULT;
-
-/** \brief Set Output
- *
- * FIXME: Needs doc
- */
-void set_output(uint8_t output) {
- set_output_user(output);
- desired_output = output;
-}
-
-/** \brief Set Output User
- *
- * FIXME: Needs doc
- */
-__attribute__((weak)) void set_output_user(uint8_t output) {}
-
-static bool is_usb_configured(void) {
-#if defined(PROTOCOL_LUFA)
- return USB_DeviceState == DEVICE_STATE_Configured;
-#endif
-}
-
-/** \brief Auto Detect Output
- *
- * FIXME: Needs doc
- */
-uint8_t auto_detect_output(void) {
- if (is_usb_configured()) {
- return OUTPUT_USB;
- }
-
-#ifdef MODULE_ADAFRUIT_BLE
- if (adafruit_ble_is_connected()) {
- return OUTPUT_BLUETOOTH;
- }
-#endif
-
-#ifdef BLUETOOTH_ENABLE
- return OUTPUT_BLUETOOTH; // should check if BT is connected here
-#endif
-
- return OUTPUT_NONE;
-}
-
-/** \brief Where To Send
- *
- * FIXME: Needs doc
- */
-uint8_t where_to_send(void) {
- if (desired_output == OUTPUT_AUTO) {
- return auto_detect_output();
- }
- return desired_output;
-}
diff --git a/tmk_core/protocol/lufa/outputselect.h b/tmk_core/protocol/lufa/outputselect.h
deleted file mode 100644
index c4548e1122..0000000000
--- a/tmk_core/protocol/lufa/outputselect.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2017 Priyadi Iman Nurcahyo
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include <stdint.h>
-
-enum outputs {
- OUTPUT_AUTO,
-
- OUTPUT_NONE,
- OUTPUT_USB,
- OUTPUT_BLUETOOTH
-};
-
-#ifndef OUTPUT_DEFAULT
-# define OUTPUT_DEFAULT OUTPUT_AUTO
-#endif
-
-void set_output(uint8_t output);
-void set_output_user(uint8_t output);
-uint8_t auto_detect_output(void);
-uint8_t where_to_send(void);
diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/tmk_core/protocol/lufa/ringbuffer.hpp
deleted file mode 100644
index 70a3c4881d..0000000000
--- a/tmk_core/protocol/lufa/ringbuffer.hpp
+++ /dev/null
@@ -1,66 +0,0 @@
-#pragma once
-// A simple ringbuffer holding Size elements of type T
-template <typename T, uint8_t Size>
-class RingBuffer {
- protected:
- T buf_[Size];
- uint8_t head_{0}, tail_{0};
- public:
- inline uint8_t nextPosition(uint8_t position) {
- return (position + 1) % Size;
- }
-
- inline uint8_t prevPosition(uint8_t position) {
- if (position == 0) {
- return Size - 1;
- }
- return position - 1;
- }
-
- inline bool enqueue(const T &item) {
- static_assert(Size > 1, "RingBuffer size must be > 1");
- uint8_t next = nextPosition(head_);
- if (next == tail_) {
- // Full
- return false;
- }
-
- buf_[head_] = item;
- head_ = next;
- return true;
- }
-
- inline bool get(T &dest, bool commit = true) {
- auto tail = tail_;
- if (tail == head_) {
- // No more data
- return false;
- }
-
- dest = buf_[tail];
- tail = nextPosition(tail);
-
- if (commit) {
- tail_ = tail;
- }
- return true;
- }
-
- inline bool empty() const { return head_ == tail_; }
-
- inline uint8_t size() const {
- int diff = head_ - tail_;
- if (diff >= 0) {
- return diff;
- }
- return Size + diff;
- }
-
- inline T& front() {
- return buf_[tail_];
- }
-
- inline bool peek(T &item) {
- return get(item, false);
- }
-};
diff --git a/tmk_core/protocol/m0110.c b/tmk_core/protocol/m0110.c
deleted file mode 100644
index 64f2fa50ab..0000000000
--- a/tmk_core/protocol/m0110.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/*
-Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-/* M0110A Support was contributed by skagon@github */
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "m0110.h"
-#include "debug.h"
-
-static inline uint8_t raw2scan(uint8_t raw);
-static inline uint8_t inquiry(void);
-static inline uint8_t instant(void);
-static inline void clock_lo(void);
-static inline void clock_hi(void);
-static inline bool clock_in(void);
-static inline void data_lo(void);
-static inline void data_hi(void);
-static inline bool data_in(void);
-static inline uint16_t wait_clock_lo(uint16_t us);
-static inline uint16_t wait_clock_hi(uint16_t us);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-static inline void idle(void);
-static inline void request(void);
-
-#define WAIT_US(stat, us, err) \
- do { \
- if (!wait_##stat(us)) { \
- m0110_error = err; \
- goto ERROR; \
- } \
- } while (0)
-
-#define WAIT_MS(stat, ms, err) \
- do { \
- uint16_t _ms = ms; \
- while (_ms) { \
- if (wait_##stat(1000)) { \
- break; \
- } \
- _ms--; \
- } \
- if (_ms == 0) { \
- m0110_error = err; \
- goto ERROR; \
- } \
- } while (0)
-
-#define KEY(raw) ((raw)&0x7f)
-#define IS_BREAK(raw) (((raw)&0x80) == 0x80)
-
-uint8_t m0110_error = 0;
-
-void m0110_init(void) {
- idle();
- _delay_ms(1000);
-
- /* Not needed to initialize in fact.
- uint8_t data;
- m0110_send(M0110_MODEL);
- data = m0110_recv();
- print("m0110_init model: "); print_hex8(data); print("\n");
-
- m0110_send(M0110_TEST);
- data = m0110_recv();
- print("m0110_init test: "); print_hex8(data); print("\n");
- */
-}
-
-uint8_t m0110_send(uint8_t data) {
- m0110_error = 0;
-
- request();
- WAIT_MS(clock_lo, 250, 1); // keyboard may block long time
- for (uint8_t bit = 0x80; bit; bit >>= 1) {
- WAIT_US(clock_lo, 250, 3);
- if (data & bit) {
- data_hi();
- } else {
- data_lo();
- }
- WAIT_US(clock_hi, 200, 4);
- }
- _delay_us(100); // hold last bit for 80us
- idle();
- return 1;
-ERROR:
- print("m0110_send err: ");
- print_hex8(m0110_error);
- print("\n");
- _delay_ms(500);
- idle();
- return 0;
-}
-
-uint8_t m0110_recv(void) {
- uint8_t data = 0;
- m0110_error = 0;
-
- WAIT_MS(clock_lo, 250, 1); // keyboard may block long time
- for (uint8_t i = 0; i < 8; i++) {
- data <<= 1;
- WAIT_US(clock_lo, 200, 2);
- WAIT_US(clock_hi, 200, 3);
- if (data_in()) {
- data |= 1;
- }
- }
- idle();
- return data;
-ERROR:
- print("m0110_recv err: ");
- print_hex8(m0110_error);
- print("\n");
- _delay_ms(500);
- idle();
- return 0xFF;
-}
-
-/*
-Handling for exceptional case of key combinations for M0110A
-
-Shift and Calc/Arrow key could be operated simultaneously:
-
- Case Shift Arrow Events Interpret
- -------------------------------------------------------------------
- 1 Down Down 71, 79, DD Calc(d)*a *b
- 2 Down Up 71, 79, UU Arrow&Calc(u)*a
- 3 Up Down F1, 79, DD Shift(u) *c
- 4 Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
-
- Case Shift Calc Events Interpret
- -------------------------------------------------------------------
- 5(1) Down Down 71, 71, 79, DD Shift(d) and Cacl(d)
- 6(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a
- 7(1) Up Down F1, 71, 79, DD Shift(u) and Calc(d)
- 8(4) Up Up F1, F1, 79, UU Shift(ux2) and Arrow&Calc(u)*a
-
-During Calc key is hold:
- Case Shift Arrow Events Interpret
- -------------------------------------------------------------------
- A(3) ---- Down F1, 79, DD Shift(u) *c
- B ---- Up 79, UU Arrow&Calc(u)*a
- C Down ---- F1, 71 Shift(u) and Shift(d)
- D Up ---- F1 Shift(u)
- E Hold Down 79, DD Normal
- F Hold Up 79, UU Arrow&Calc(u)*a
- G(1) Down Down F1, 71, 79, DD Shift(u)*b and Calc(d)*a
- H(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a
- I(3) Up Down F1, F1, 79, DD Shift(ux2) *c
- J(4) Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
-
- Case Shift Calc Events Interpret
- -------------------------------------------------------------------
- K(1) ---- Down 71, 79, DD Calc(d)*a
- L(4) ---- Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
- M(1) Hold Down 71, 79, DD Calc(d)*a
- N Hold Up 79, UU Arrow&Calc(u)*a
-
- Where DD/UU indicates part of Keypad Down/Up event.
- *a: Impossible to distinguish btween Arrow and Calc event.
- *b: Shift(d) event is ignored.
- *c: Arrow/Calc(d) event is ignored.
-*/
-uint8_t m0110_recv_key(void) {
- static uint8_t keybuf = 0x00;
- static uint8_t keybuf2 = 0x00;
- static uint8_t rawbuf = 0x00;
- uint8_t raw, raw2, raw3;
-
- if (keybuf) {
- raw = keybuf;
- keybuf = 0x00;
- return raw;
- }
- if (keybuf2) {
- raw = keybuf2;
- keybuf2 = 0x00;
- return raw;
- }
-
- if (rawbuf) {
- raw = rawbuf;
- rawbuf = 0x00;
- } else {
- raw = instant(); // Use INSTANT for better response. Should be INQUIRY ?
- }
- switch (KEY(raw)) {
- case M0110_KEYPAD:
- raw2 = instant();
- switch (KEY(raw2)) {
- case M0110_ARROW_UP:
- case M0110_ARROW_DOWN:
- case M0110_ARROW_LEFT:
- case M0110_ARROW_RIGHT:
- if (IS_BREAK(raw2)) {
- // Case B,F,N:
- keybuf = (raw2scan(raw2) | M0110_CALC_OFFSET); // Calc(u)
- return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); // Arrow(u)
- }
- break;
- }
- // Keypad or Arrow
- return (raw2scan(raw2) | M0110_KEYPAD_OFFSET);
- break;
- case M0110_SHIFT:
- raw2 = instant();
- switch (KEY(raw2)) {
- case M0110_SHIFT:
- // Case: 5-8,C,G,H
- rawbuf = raw2;
- return raw2scan(raw); // Shift(d/u)
- break;
- case M0110_KEYPAD:
- // Shift + Arrow, Calc, or etc.
- raw3 = instant();
- switch (KEY(raw3)) {
- case M0110_ARROW_UP:
- case M0110_ARROW_DOWN:
- case M0110_ARROW_LEFT:
- case M0110_ARROW_RIGHT:
- if (IS_BREAK(raw)) {
- if (IS_BREAK(raw3)) {
- // Case 4:
- print("(4)\n");
- keybuf2 = raw2scan(raw); // Shift(u)
- keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u)
- return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u)
- } else {
- // Case 3:
- print("(3)\n");
- return (raw2scan(raw)); // Shift(u)
- }
- } else {
- if (IS_BREAK(raw3)) {
- // Case 2:
- print("(2)\n");
- keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u)
- return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u)
- } else {
- // Case 1:
- print("(1)\n");
- return (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(d)
- }
- }
- break;
- default:
- // Shift + Keypad
- keybuf = (raw2scan(raw3) | M0110_KEYPAD_OFFSET);
- return raw2scan(raw); // Shift(d/u)
- break;
- }
- break;
- default:
- // Shift + Normal keys
- keybuf = raw2scan(raw2);
- return raw2scan(raw); // Shift(d/u)
- break;
- }
- break;
- default:
- // Normal keys
- return raw2scan(raw);
- break;
- }
-}
-
-static inline uint8_t raw2scan(uint8_t raw) { return (raw == M0110_NULL) ? M0110_NULL : ((raw == M0110_ERROR) ? M0110_ERROR : (((raw & 0x80) | ((raw & 0x7F) >> 1)))); }
-
-static inline uint8_t inquiry(void) {
- m0110_send(M0110_INQUIRY);
- return m0110_recv();
-}
-
-static inline uint8_t instant(void) {
- m0110_send(M0110_INSTANT);
- uint8_t data = m0110_recv();
- if (data != M0110_NULL) {
- debug_hex(data);
- debug(" ");
- }
- return data;
-}
-
-static inline void clock_lo() {
- M0110_CLOCK_PORT &= ~(1 << M0110_CLOCK_BIT);
- M0110_CLOCK_DDR |= (1 << M0110_CLOCK_BIT);
-}
-static inline void clock_hi() {
- /* input with pull up */
- M0110_CLOCK_DDR &= ~(1 << M0110_CLOCK_BIT);
- M0110_CLOCK_PORT |= (1 << M0110_CLOCK_BIT);
-}
-static inline bool clock_in() {
- M0110_CLOCK_DDR &= ~(1 << M0110_CLOCK_BIT);
- M0110_CLOCK_PORT |= (1 << M0110_CLOCK_BIT);
- _delay_us(1);
- return M0110_CLOCK_PIN & (1 << M0110_CLOCK_BIT);
-}
-static inline void data_lo() {
- M0110_DATA_PORT &= ~(1 << M0110_DATA_BIT);
- M0110_DATA_DDR |= (1 << M0110_DATA_BIT);
-}
-static inline void data_hi() {
- /* input with pull up */
- M0110_DATA_DDR &= ~(1 << M0110_DATA_BIT);
- M0110_DATA_PORT |= (1 << M0110_DATA_BIT);
-}
-static inline bool data_in() {
- M0110_DATA_DDR &= ~(1 << M0110_DATA_BIT);
- M0110_DATA_PORT |= (1 << M0110_DATA_BIT);
- _delay_us(1);
- return M0110_DATA_PIN & (1 << M0110_DATA_BIT);
-}
-
-static inline uint16_t wait_clock_lo(uint16_t us) {
- while (clock_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_clock_hi(uint16_t us) {
- while (!clock_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_data_lo(uint16_t us) {
- while (data_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-static inline uint16_t wait_data_hi(uint16_t us) {
- while (!data_in() && us) {
- asm("");
- _delay_us(1);
- us--;
- }
- return us;
-}
-
-static inline void idle(void) {
- clock_hi();
- data_hi();
-}
-
-static inline void request(void) {
- clock_hi();
- data_lo();
-}
-
-/*
-Primitive M0110 Library for AVR
-==============================
-
-
-Signaling
----------
-CLOCK is always from KEYBOARD. DATA are sent with MSB first.
-
-1) IDLE: both lines are high.
- CLOCK ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- DATA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-2) KEYBOARD->HOST: HOST reads bit on rising edge.
- CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
- DATA ~~~~~~~~~~~~X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
- <--> 160us(clock low)
- <---> 180us(clock high)
-
-3) HOST->KEYBOARD: HOST asserts bit on falling edge.
- CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
- DATA ~~~~~~|_____X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
- <----> 840us(request to send by host) <---> 80us(hold DATA)
- <--> 180us(clock low)
- <---> 220us(clock high)
-
-
-Protocol
---------
-COMMAND:
- Inquiry 0x10 get key event with block
- Instant 0x12 get key event
- Model 0x14 get model number(M0110 responds with 0x09)
- bit 7 1 if another device connected(used when keypad exists?)
- bit4-6 next device model number
- bit1-3 keyboard model number
- bit 0 always 1
- Test 0x16 test(ACK:0x7D/NAK:0x77)
-
-KEY EVENT:
- bit 7 key state(0:press 1:release)
- bit 6-1 scan code(see below)
- bit 0 always 1
- To get scan code use this: ((bits&(1<<7)) | ((bits&0x7F))>>1).
-
- Note: On the M0110A, Keypad keys and Arrow keys are preceded by 0x79.
- Moreover, some Keypad keys(=, /, * and +) are preceded by 0x71 on press and 0xF1 on release.
-
-ARROW KEYS:
- Arrow keys and Calc keys(+,*,/,= on keypad) share same byte sequence and preceding byte of
- Calc keys(0x71 and 0xF1) means press and release event of SHIFT. This causes a very confusing situation,
- it is difficult or impossible to tell Calc key from Arrow key plus SHIFT in some cases.
-
- Raw key events:
- press release
- ---------------- ----------------
- Left: 0x79, 0x0D 0x79, 0x8D
- Right: 0x79, 0x05 0x79, 0x85
- Up: 0x79, 0x1B 0x79, 0x9B
- Down: 0x79, 0x11 0x79, 0x91
- Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D
- Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85
- Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B
- Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91
-
-
-RAW CODE:
- M0110A
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- |-----------------------------------------------------' | |---------------|
- |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- |---------------------------------------------------------' |-----------|Ent|
- |Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
- `---------------------------------------------------------' `---------------'
- ,---------------------------------------------------------. ,---------------.
- | 65| 25| 27| 29| 2B| 2F| 2D| 35| 39| 33| 3B| 37| 31| 67| |+0F|*11|*1B|*05|
- |---------------------------------------------------------| |---------------|
- | 61| 19| 1B| 1D| 1F| 23| 21| 41| 45| 3F| 47| 43| 3D| | |+33|+37|+39|+1D|
- |-----------------------------------------------------' | |---------------|
- | 73| 01| 03| 05| 07| 0B| 09| 4D| 51| 4B| 53| 4F| 49| |+2D|+2F|+31|*0D|
- |---------------------------------------------------------| |---------------|
- | 71| 0D| 0F| 11| 13| 17| 5B| 5D| 27| 5F| 59| 71|+1B| |+27|+29|+2B| |
- |---------------------------------------------------------' |-----------|+19|
- | 75| 6F| 63 | 55|+0D|+05|+11| | +25|+03| |
- `---------------------------------------------------------' `---------------'
- + 0x79, 0xDD / 0xF1, 0xUU
- * 0x71, 0x79,DD / 0xF1, 0x79, 0xUU
-
-
-MODEL NUMBER:
- M0110: 0x09 00001001 : model number 4 (100)
- M0110A: 0x0B 00001011 : model number 5 (101)
- M0110 & M0120: ???
-
-
-Scan Code
----------
- m0110_recv_key() function returns following scan codes instead of M0110 raw codes.
- Scan codes are 1 byte size and MSB(bit7) is set when key is released.
-
- scancode = ((raw&0x80) | ((raw&0x7F)>>1))
-
- M0110 M0120
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -|Lft|Rgt|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9|Up |
- |---------------------------------------------------------| |---------------|
- |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6|Dn |
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /| | | 1| 2| 3| |
- `---------------------------------------------------------' |-----------|Ent|
- |Opt|Mac | Space |Enter|Opt| | 0| .| |
- `------------------------------------------------' `---------------'
- ,---------------------------------------------------------. ,---------------.
- | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 4E| 46| 42|
- |---------------------------------------------------------| |---------------|
- | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4D|
- |---------------------------------------------------------| |---------------|
- | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 48|
- |---------------------------------------------------------| |---------------|
- | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| | 53| 54| 55| |
- `---------------------------------------------------------' |-----------| 4C|
- | 3A| 37| 31 | 34| 3A| | 52| 41| |
- `------------------------------------------------' `---------------'
-
- International keyboard(See page 22 of "Technical Info for 128K/512K")
- ,---------------------------------------------------------.
- | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33|
- |---------------------------------------------------------|
- | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
- |------------------------------------------------------ |
- | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| |
- |---------------------------------------------------------|
- | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38|
- `---------------------------------------------------------'
- | 3A| 37| 34 | 31| 3A|
- `------------------------------------------------'
-
- M0110A
- ,---------------------------------------------------------. ,---------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
- |---------------------------------------------------------| |---------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- |-----------------------------------------------------' | |---------------|
- |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
- |---------------------------------------------------------| |---------------|
- |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- |---------------------------------------------------------' |-----------|Ent|
- |Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
- `---------------------------------------------------------' `---------------'
- ,---------------------------------------------------------. ,---------------.
- | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
- |---------------------------------------------------------| |---------------|
- | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E|
- |-----------------------------------------------------' | |---------------|
- | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66|
- |---------------------------------------------------------| |---------------|
- | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| |
- |---------------------------------------------------------' |-----------| 4C|
- | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| |
- `---------------------------------------------------------' `---------------'
-
-
-References
-----------
-Technical Info for 128K/512K and Plus
- ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20128K.pdf
- ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20Plus.pdf
-Protocol:
- Page 20 of Tech Info for 128K/512K
- http://www.mac.linux-m68k.org/devel/plushw.php
-Connector:
- Page 20 of Tech Info for 128K/512K
- http://www.kbdbabel.org/conn/kbd_connector_macplus.png
-Signaling:
- http://www.kbdbabel.org/signaling/kbd_signaling_mac.png
- http://typematic.blog.shinobi.jp/Entry/14/
-M0110 raw scan codes:
- Page 22 of Tech Info for 128K/512K
- Page 07 of Tech Info for Plus
- http://m0115.web.fc2.com/m0110.jpg
- http://m0115.web.fc2.com/m0110a.jpg
-*/
diff --git a/tmk_core/protocol/m0110.h b/tmk_core/protocol/m0110.h
deleted file mode 100644
index 63ff3e90ec..0000000000
--- a/tmk_core/protocol/m0110.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-/* port settings for clock and data line */
-#if !(defined(M0110_CLOCK_PORT) && defined(M0110_CLOCK_PIN) && defined(M0110_CLOCK_DDR) && defined(M0110_CLOCK_BIT))
-# error "M0110 clock port setting is required in config.h"
-#endif
-
-#if !(defined(M0110_DATA_PORT) && defined(M0110_DATA_PIN) && defined(M0110_DATA_DDR) && defined(M0110_DATA_BIT))
-# error "M0110 data port setting is required in config.h"
-#endif
-
-/* Commands */
-#define M0110_INQUIRY 0x10
-#define M0110_INSTANT 0x14
-#define M0110_MODEL 0x16
-#define M0110_TEST 0x36
-
-/* Response(raw byte from M0110) */
-#define M0110_NULL 0x7B
-#define M0110_KEYPAD 0x79
-#define M0110_TEST_ACK 0x7D
-#define M0110_TEST_NAK 0x77
-#define M0110_SHIFT 0x71
-#define M0110_ARROW_UP 0x1B
-#define M0110_ARROW_DOWN 0x11
-#define M0110_ARROW_LEFT 0x0D
-#define M0110_ARROW_RIGHT 0x05
-
-/* This inidcates no response. */
-#define M0110_ERROR 0xFF
-
-/* scan code offset for keypad and arrow keys */
-#define M0110_KEYPAD_OFFSET 0x40
-#define M0110_CALC_OFFSET 0x60
-
-extern uint8_t m0110_error;
-
-/* host role */
-void m0110_init(void);
-uint8_t m0110_send(uint8_t data);
-uint8_t m0110_recv(void);
-uint8_t m0110_recv_key(void);
-uint8_t m0110_inquiry(void);
-uint8_t m0110_instant(void);
diff --git a/tmk_core/protocol/midi/qmk_midi.c b/tmk_core/protocol/midi/qmk_midi.c
index c18dbf9930..3a454d61ae 100644
--- a/tmk_core/protocol/midi/qmk_midi.c
+++ b/tmk_core/protocol/midi/qmk_midi.c
@@ -4,9 +4,6 @@
#include "midi.h"
#include "usb_descriptor.h"
#include "process_midi.h"
-#if API_SYSEX_ENABLE
-# include "api_sysex.h"
-#endif
/*******************************************************************************
* MIDI
@@ -124,41 +121,6 @@ static void cc_callback(MidiDevice* device, uint8_t chan, uint8_t num, uint8_t v
// midi_send_cc(device, (chan + 1) % 16, num, val);
}
-#ifdef API_SYSEX_ENABLE
-uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0};
-
-static void sysex_callback(MidiDevice* device, uint16_t start, uint8_t length, uint8_t* data) {
- // SEND_STRING("\n");
- // send_word(start);
- // SEND_STRING(": ");
- // Don't store the header
- int16_t pos = start - 4;
- for (uint8_t place = 0; place < length; place++) {
- // send_byte(*data);
- if (pos >= 0) {
- if (*data == 0xF7) {
- // SEND_STRING("\nRD: ");
- // for (uint8_t i = 0; i < start + place + 1; i++){
- // send_byte(midi_buffer[i]);
- // SEND_STRING(" ");
- // }
- const unsigned decoded_length = sysex_decoded_length(pos);
- uint8_t decoded[API_SYSEX_MAX_SIZE];
- sysex_decode(decoded, midi_buffer, pos);
- process_api(decoded_length, decoded);
- return;
- } else if (pos >= MIDI_SYSEX_BUFFER) {
- return;
- }
- midi_buffer[pos] = *data;
- }
- // SEND_STRING(" ");
- data++;
- pos++;
- }
-}
-#endif
-
void midi_init(void);
void setup_midi(void) {
@@ -170,7 +132,4 @@ void setup_midi(void) {
midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
midi_register_cc_callback(&midi_device, cc_callback);
-#ifdef API_SYSEX_ENABLE
- midi_register_sysex_callback(&midi_device, sysex_callback);
-#endif
}
diff --git a/tmk_core/protocol/news.c b/tmk_core/protocol/news.c
deleted file mode 100644
index 4463e8dd42..0000000000
--- a/tmk_core/protocol/news.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
-Copyright 2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "news.h"
-
-void news_init(void) { NEWS_KBD_RX_INIT(); }
-
-// RX ring buffer
-#define RBUF_SIZE 8
-static uint8_t rbuf[RBUF_SIZE];
-static uint8_t rbuf_head = 0;
-static uint8_t rbuf_tail = 0;
-
-uint8_t news_recv(void) {
- uint8_t data = 0;
- if (rbuf_head == rbuf_tail) {
- return 0;
- }
-
- data = rbuf[rbuf_tail];
- rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
- return data;
-}
-
-// USART RX complete interrupt
-ISR(NEWS_KBD_RX_VECT) {
- uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
- if (next != rbuf_tail) {
- rbuf[rbuf_head] = NEWS_KBD_RX_DATA;
- rbuf_head = next;
- }
-}
-
-/*
-SONY NEWS Keyboard Protocol
-===========================
-
-Resources
----------
- Mouse protocol of NWA-5461(Japanese)
- http://groups.google.com/group/fj.sys.news/browse_thread/thread/a01b3e3ac6ae5b2d
-
- SONY NEWS Info(Japanese)
- http://katsu.watanabe.name/doc/sonynews/
-
-
-Pinouts
--------
- EIA 232 male connector from NWP-5461
- -------------
- \ 1 2 3 4 5 /
- \ 6 7 8 9 /
- ---------
- 1 VCC
- 2 BZ(Speaker)
- 3 Keyboard Data(from keyboard MCU TxD)
- 4 NC
- 5 GND
- 6 Unknown Input(to keyboard MCU RxD via schmitt trigger)
- 7 Mouse Data(from Mouse Ext connector)
- 8 Unknown Input(to Keyboard MCU Input via diode and buffer)
- 9 FG
- NOTE: Two LED on keyboard are controlled by pin 6,8?
-
- EIA 232 male connector from NWP-411A
- -------------
- \ 1 2 3 4 5 /
- \ 6 7 8 9 /
- ---------
- 1 VCC
- 2 BZ(Speaker)
- 3 Keyboard Data(from keyboard MCU TxD)
- 4 NC
- 5 GND
- 6 NC
- 7 Mouse Data(from Mouse Ext connector)
- 8 NC
- 9 FG
- NOTE: These are just from my guess and not confirmed.
-
-
-Signaling
----------
- ~~~~~~~~~~ ____XOO0X111X222X333X444X555X666X777~~~~ ~~~~~~~
- Idle Start LSB MSB Stop Idle
-
- Idle: High
- Start bit: Low
- Stop bit: High
- Bit order: LSB first
-
- Baud rate: 9600
- Interface: TTL level(5V) UART
-
- NOTE: This is observed on NWP-5461 with its DIP switch all OFF.
-
-
-Format
-------
- MSB LSB
- 7 6 5 4 3 2 1 0 bit
- | | | | | | | |
- | +-+-+-+-+-+-+-- scan code(00-7F)
- +---------------- break flag: sets when released
-
-
-Scan Codes
-----------
- SONY NEWS NWP-5461
- ,---. ,------------------------, ,------------------------. ,---------.
- | 7A| | 01 | 02 | 03 | 04 | 05 | | 06 | 07 | 08 | 09 | 0A | | 68 | 69 | ,-----------.
- `---' `------------------------' `------------------------' `---------' | 64| 65| 52|
- ,-------------------------------------------------------------. ,---. ,---------------|
- | 0B| 0C| 0D| 0E| 0F| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19 | | 6A| | 4B| 4C| 4D| 4E|
- |-------------------------------------------------------------| |---| |---------------|
- | 1A | 1B| 1C| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| | | 6B| | 4F| 50| 51| 56|
- |---------------------------------------------------------' | |---| |---------------|
- | 28 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35 | | 6C| | 53| 54| 55| |
- |-------------------------------------------------------------| |---| |-----------| 5A|
- | 36 | 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42 | | 6D| | 57| 59| 58| |
- |-------------------------------------------------------------| |---| |---------------|
- | 43 | 44 | 45 | 46 | 47 | 48| 49| 4A | | 6E| | 66| 5B| 5C| 5D|
- `-------------------------------------------------------------' `---' `---------------'
-*/
diff --git a/tmk_core/protocol/news.h b/tmk_core/protocol/news.h
deleted file mode 100644
index 327a13856d..0000000000
--- a/tmk_core/protocol/news.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-Copyright 2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-/*
- * Primitive PS/2 Library for AVR
- */
-
-/* host role */
-void news_init(void);
-uint8_t news_recv(void);
-
-/* device role */
diff --git a/tmk_core/protocol/next_kbd.c b/tmk_core/protocol/next_kbd.c
deleted file mode 100644
index 6f118e6172..0000000000
--- a/tmk_core/protocol/next_kbd.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
-
-NeXT non-ADB Keyboard Protocol
-
-Copyright 2013, Benjamin Gould (bgould@github.com)
-
-Based on:
-TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license
-
-Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB
-Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html
-Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <util/atomic.h>
-#include <util/delay.h>
-#include "next_kbd.h"
-#include "debug.h"
-
-static inline void out_lo(void);
-static inline void out_hi(void);
-static inline void query(void);
-static inline void reset(void);
-static inline uint32_t response(void);
-
-/* The keyboard sends signal with 50us pulse width on OUT line
- * while it seems to miss the 50us pulse on In line.
- * next_kbd_set_leds() often fails to sync LED status with 50us
- * but it works well with 51us(+1us) on TMK converter(ATMeaga32u2) at least.
- * TODO: test on Teensy and Pro Micro configuration
- */
-#define out_hi_delay(intervals) \
- do { \
- out_hi(); \
- _delay_us((NEXT_KBD_TIMING + 1) * intervals); \
- } while (0);
-#define out_lo_delay(intervals) \
- do { \
- out_lo(); \
- _delay_us((NEXT_KBD_TIMING + 1) * intervals); \
- } while (0);
-#define query_delay(intervals) \
- do { \
- query(); \
- _delay_us((NEXT_KBD_TIMING + 1) * intervals); \
- } while (0);
-#define reset_delay(intervals) \
- do { \
- reset(); \
- _delay_us((NEXT_KBD_TIMING + 1) * intervals); \
- } while (0);
-
-void next_kbd_init(void) {
- out_hi();
- NEXT_KBD_IN_DDR &= ~(1 << NEXT_KBD_IN_BIT); // KBD_IN to input
- NEXT_KBD_IN_PORT |= (1 << NEXT_KBD_IN_BIT); // KBD_IN pull up
-
- query_delay(5);
- reset_delay(8);
-
- query_delay(5);
- reset_delay(8);
-}
-
-void next_kbd_set_leds(bool left, bool right) {
- cli();
- out_lo_delay(9);
-
- out_hi_delay(3);
- out_lo_delay(1);
-
- if (left) {
- out_hi_delay(1);
- } else {
- out_lo_delay(1);
- }
-
- if (right) {
- out_hi_delay(1);
- } else {
- out_lo_delay(1);
- }
-
- out_lo_delay(7);
- out_hi();
- sei();
-}
-
-#define NEXT_KBD_READ (NEXT_KBD_IN_PIN & (1 << NEXT_KBD_IN_BIT))
-uint32_t next_kbd_recv(void) {
- // First check to make sure that the keyboard is actually connected;
- // if not, just return
- // TODO: reflect the status of the keyboard in a return code
- if (!NEXT_KBD_READ) {
- sei();
- return 0;
- }
-
- query();
- uint32_t resp = response();
-
- return resp;
-}
-
-static inline uint32_t response(void) {
- cli();
-
- // try a 5ms read; this should be called after the query method has
- // been run so if a key is pressed we should get a response within
- // 5ms; if not then send a reset and exit
- uint8_t i = 0;
- uint32_t data = 0;
- uint16_t reset_timeout = 50000;
- while (NEXT_KBD_READ && reset_timeout) {
- asm("");
- _delay_us(1);
- reset_timeout--;
- }
- if (!reset_timeout) {
- reset();
- sei();
- return 0;
- }
- _delay_us(NEXT_KBD_TIMING / 2);
- for (; i < 22; i++) {
- if (NEXT_KBD_READ) {
- data |= ((uint32_t)1 << i);
- /* Note:
- * My testing with the ATmega32u4 showed that there might
- * something wrong with the timing here; by the end of the
- * second data byte some of the modifiers can get bumped out
- * to the next bit over if we just cycle through the data
- * based on the expected interval. There is a bit (i = 10)
- * in the middle of the data that is always on followed by
- * one that is always off - so we'll use that to reset our
- * timing in case we've gotten ahead of the keyboard;
- */
- if (i == 10) {
- i++;
- while (NEXT_KBD_READ)
- ;
- _delay_us(NEXT_KBD_TIMING / 2);
- }
- } else {
- /* redundant - but I don't want to remove if it might screw
- * up the timing
- */
- data |= ((uint32_t)0 << i);
- }
- _delay_us(NEXT_KBD_TIMING);
- }
-
- sei();
-
- return data;
-}
-
-static inline void out_lo(void) {
- NEXT_KBD_OUT_PORT &= ~(1 << NEXT_KBD_OUT_BIT);
- NEXT_KBD_OUT_DDR |= (1 << NEXT_KBD_OUT_BIT);
-}
-
-static inline void out_hi(void) {
- /* input with pull up */
- NEXT_KBD_OUT_DDR &= ~(1 << NEXT_KBD_OUT_BIT);
- NEXT_KBD_OUT_PORT |= (1 << NEXT_KBD_OUT_BIT);
-}
-
-static inline void query(void) {
- out_lo_delay(5);
- out_hi_delay(1);
- out_lo_delay(3);
- out_hi();
-}
-
-static inline void reset(void) {
- out_lo_delay(1);
- out_hi_delay(4);
- out_lo_delay(1);
- out_hi_delay(6);
- out_lo_delay(10);
- out_hi();
-}
diff --git a/tmk_core/protocol/next_kbd.h b/tmk_core/protocol/next_kbd.h
deleted file mode 100644
index 1249ebf392..0000000000
--- a/tmk_core/protocol/next_kbd.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-NeXT non-ADB Keyboard Protocol
-
-Copyright 2013, Benjamin Gould (bgould@github.com)
-
-Based on:
-TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license
-
-Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB
-Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html
-Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#pragma once
-
-#include <stdbool.h>
-
-#define NEXT_KBD_KMBUS_IDLE 0x300600
-#define NEXT_KBD_TIMING 50
-
-extern uint8_t next_kbd_error;
-
-/* host role */
-void next_kbd_init(void);
-void next_kbd_set_leds(bool left, bool right);
-uint32_t next_kbd_recv(void);
diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c
index 099964ae56..a43755f899 100644
--- a/tmk_core/protocol/usb_descriptor.c
+++ b/tmk_core/protocol/usb_descriptor.c
@@ -237,6 +237,25 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = {
HID_RI_END_COLLECTION(0),
#endif
+#ifdef PROGRAMMABLE_BUTTON_ENABLE
+ HID_RI_USAGE_PAGE(8, 0x0C), // Consumer
+ HID_RI_USAGE(8, 0x01), // Consumer Control
+ HID_RI_COLLECTION(8, 0x01), // Application
+ HID_RI_REPORT_ID(8, REPORT_ID_PROGRAMMABLE_BUTTON),
+ HID_RI_USAGE(8, 0x03), // Programmable Buttons
+ HID_RI_COLLECTION(8, 0x04), // Named Array
+ HID_RI_USAGE_PAGE(8, 0x09), // Button
+ HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1
+ HID_RI_USAGE_MAXIMUM(8, 0x20), // Button 32
+ HID_RI_LOGICAL_MINIMUM(8, 0x00),
+ HID_RI_LOGICAL_MAXIMUM(8, 0x01),
+ HID_RI_REPORT_COUNT(8, 32),
+ HID_RI_REPORT_SIZE(8, 1),
+ HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+ HID_RI_END_COLLECTION(0),
+ HID_RI_END_COLLECTION(0),
+#endif
+
#ifdef NKRO_ENABLE
HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop
HID_RI_USAGE(8, 0x06), // Keyboard
diff --git a/tmk_core/protocol/usb_hid/parser.h b/tmk_core/protocol/usb_hid/parser.h
index 036281fa66..ba35b7af5a 100644
--- a/tmk_core/protocol/usb_hid/parser.h
+++ b/tmk_core/protocol/usb_hid/parser.h
@@ -1,5 +1,4 @@
-#ifndef PARSER_H
-#define PARSER_H
+#pragma once
#include "hid.h"
#include "report.h"
@@ -11,5 +10,3 @@ public:
uint16_t time_stamp;
virtual void Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf);
};
-
-#endif
diff --git a/tmk_core/protocol/usb_hid/usb_hid.h b/tmk_core/protocol/usb_hid/usb_hid.h
index 083b68d1f5..5cb5f5d035 100644
--- a/tmk_core/protocol/usb_hid/usb_hid.h
+++ b/tmk_core/protocol/usb_hid/usb_hid.h
@@ -1,10 +1,6 @@
-#ifndef USB_HID_H
-#define USB_HID_H
+#pragma once
#include "report.h"
-
extern report_keyboard_t usb_hid_keyboard_report;
extern uint16_t usb_hid_time_stamp;
-
-#endif
diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c
index 485b20c900..e4db5d0654 100644
--- a/tmk_core/protocol/vusb/vusb.c
+++ b/tmk_core/protocol/vusb/vusb.c
@@ -226,8 +226,9 @@ static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
+static void send_programmable_button(uint32_t data);
-static host_driver_t driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer};
+static host_driver_t driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button};
host_driver_t *vusb_driver(void) { return &driver; }
@@ -296,6 +297,19 @@ void send_digitizer(report_digitizer_t *report) {
#ifdef DIGITIZER_ENABLE
if (usbInterruptIsReadyShared()) {
usbSetInterruptShared((void *)report, sizeof(report_digitizer_t));
+#endif
+}
+
+static void send_programmable_button(uint32_t data) {
+#ifdef PROGRAMMABLE_BUTTON_ENABLE
+ static report_programmable_button_t report = {
+ .report_id = REPORT_ID_PROGRAMMABLE_BUTTON,
+ };
+
+ report.usage = data;
+
+ if (usbInterruptIsReadyShared()) {
+ usbSetInterruptShared((void *)&report, sizeof(report));
}
#endif
}
@@ -558,6 +572,26 @@ const PROGMEM uchar shared_hid_report[] = {
0xC0 // End Collection
#endif
+#ifdef PROGRAMMABLE_BUTTON_ENABLE
+ // Programmable buttons report descriptor
+ 0x05, 0x0C, // Usage Page (Consumer)
+ 0x09, 0x01, // Usage (Consumer Control)
+ 0xA1, 0x01, // Collection (Application)
+ 0x85, REPORT_ID_PROGRAMMABLE_BUTTON, // Report ID
+ 0x09, 0x03, // Usage (Programmable Buttons)
+ 0xA1, 0x04, // Collection (Named Array)
+ 0x05, 0x09, // Usage Page (Button)
+ 0x19, 0x01, // Usage Minimum (Button 1)
+ 0x29, 0x20, // Usage Maximum (Button 32)
+ 0x15, 0x00, // Logical Minimum (0)
+ 0x25, 0x01, // Logical Maximum (1)
+ 0x95, 0x20, // Report Count (32)
+ 0x75, 0x01, // Report Size (1)
+ 0x81, 0x02, // Input (Data, Variable, Absolute)
+ 0xC0, // End Collection
+ 0xC0 // End Collection
+#endif
+
#ifdef SHARED_EP_ENABLE
};
#endif
diff --git a/tmk_core/protocol/xt.h b/tmk_core/protocol/xt.h
deleted file mode 100644
index 538ff0e459..0000000000
--- a/tmk_core/protocol/xt.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-Copyright 2018 Jun WAKO <wakojun@gmail.com>
-Copyright 2016 Ethan Apodaca <papodaca@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-#include "quantum.h"
-
-#define XT_DATA_IN() \
- do { \
- setPinInput(XT_DATA_PIN); \
- writePinHigh(XT_DATA_PIN); \
- } while (0)
-
-#define XT_DATA_READ() readPin(XT_DATA_PIN)
-
-#define XT_DATA_LO() \
- do { \
- writePinLow(XT_DATA_PIN); \
- setPinOutput(XT_DATA_PIN); \
- } while (0)
-
-#define XT_CLOCK_IN() \
- do { \
- setPinInput(XT_CLOCK_PIN); \
- writePinHigh(XT_CLOCK_PIN); \
- } while (0)
-
-#define XT_CLOCK_READ() readPin(XT_CLOCK_PIN)
-
-#define XT_CLOCK_LO() \
- do { \
- writePinLow(XT_CLOCK_PIN); \
- setPinOutput(XT_CLOCK_PIN); \
- } while (0)
-
-void xt_host_init(void);
-
-uint8_t xt_host_recv(void);
diff --git a/tmk_core/protocol/xt_interrupt.c b/tmk_core/protocol/xt_interrupt.c
deleted file mode 100644
index ba9d71848f..0000000000
--- a/tmk_core/protocol/xt_interrupt.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
-Copyright 2018 Jun WAKO <wakojun@gmail.com>
-Copyright 2016 Ethan Apodaca <papodaca@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/interrupt.h>
-#include "xt.h"
-#include "wait.h"
-#include "debug.h"
-
-static inline uint8_t pbuf_dequeue(void);
-static inline void pbuf_enqueue(uint8_t data);
-static inline bool pbuf_has_data(void);
-static inline void pbuf_clear(void);
-
-void xt_host_init(void) {
- XT_INT_INIT();
- XT_INT_OFF();
-
- /* hard reset */
-#ifdef XT_RESET
- XT_RESET();
-#endif
-
- /* soft reset: pull clock line down for 20ms */
- XT_DATA_LO();
- XT_CLOCK_LO();
- wait_ms(20);
-
- /* input mode with pullup */
- XT_CLOCK_IN();
- XT_DATA_IN();
-
- XT_INT_ON();
-}
-
-/* get data received by interrupt */
-uint8_t xt_host_recv(void) {
- if (pbuf_has_data()) {
- return pbuf_dequeue();
- } else {
- return 0;
- }
-}
-
-ISR(XT_INT_VECT) {
- /*
- * XT signal format consits of 10 or 9 clocks and sends start bits and 8-bit data,
- * which should be read on falling edge of clock.
- *
- * start(0), start(1), bit0, bit1, bit2, bit3, bit4, bit5, bit6, bit7
- *
- * Original IBM XT keyboard sends start(0) bit while some of clones don't.
- * Start(0) bit is read as low on data line while start(1) as high.
- *
- * https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol
- */
- static enum { START, BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7 } state = START;
- static uint8_t data = 0;
-
- uint8_t dbit = XT_DATA_READ();
-
- // This is needed if using PCINT which can be called on both falling and rising edge
- // if (XT_CLOCK_READ()) return;
-
- switch (state) {
- case START:
- // ignore start(0) bit
- if (!dbit) return;
- break;
- case BIT0 ... BIT7:
- data >>= 1;
- if (dbit) data |= 0x80;
- break;
- }
- if (state++ == BIT7) {
- pbuf_enqueue(data);
- state = START;
- data = 0;
- }
- return;
-}
-
-/*--------------------------------------------------------------------
- * Ring buffer to store scan codes from keyboard
- *------------------------------------------------------------------*/
-#define PBUF_SIZE 32
-static uint8_t pbuf[PBUF_SIZE];
-static uint8_t pbuf_head = 0;
-static uint8_t pbuf_tail = 0;
-
-static inline void pbuf_enqueue(uint8_t data) {
- uint8_t sreg = SREG;
- cli();
- uint8_t next = (pbuf_head + 1) % PBUF_SIZE;
- if (next != pbuf_tail) {
- pbuf[pbuf_head] = data;
- pbuf_head = next;
- } else {
- dprintf("pbuf: full\n");
- }
- SREG = sreg;
-}
-
-static inline uint8_t pbuf_dequeue(void) {
- uint8_t val = 0;
-
- uint8_t sreg = SREG;
- cli();
- if (pbuf_head != pbuf_tail) {
- val = pbuf[pbuf_tail];
- pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE;
- }
- SREG = sreg;
-
- return val;
-}
-
-static inline bool pbuf_has_data(void) {
- uint8_t sreg = SREG;
- cli();
- bool has_data = (pbuf_head != pbuf_tail);
- SREG = sreg;
- return has_data;
-}
-
-static inline void pbuf_clear(void) {
- uint8_t sreg = SREG;
- cli();
- pbuf_head = pbuf_tail = 0;
- SREG = sreg;
-}
diff --git a/tmk_core/readme.md b/tmk_core/readme.md
index a754cfee42..a47dc88185 100644
--- a/tmk_core/readme.md
+++ b/tmk_core/readme.md
@@ -25,7 +25,6 @@ These features can be used in your keyboard.
* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
* USB NKRO - 248 keys(+ 8 modifiers) simultaneously
* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device
-* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols
* User Function - Customizable function of key with writing code
* Macro - Very primitive at this time
* Keyboard Tricks - Oneshot modifier and modifier with tapping feature
@@ -84,9 +83,9 @@ Architecture
/ /| Keys/Mouse | Protocol |d| | Action | | | Protocol |
/__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix |
|.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________
- || || |----------->| UART |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /|
- || Host || | Console | |e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
- ||________||/.<-----------| |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / /
+ || || |----------->| UART |v| | Keymap | | | | Keys / /_/_/_/_/_/_/_/ /|
+ || Host || | Console | |e| | Mousekey | | | |<----------/ /_/_/_/_/_/_/_/ / /
+ ||________||/.<-----------| |r| | Report | | | | Control / /_/_/_/_/_/_/_/ / /
`_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ /
|_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/
+---------------------------------------------+ Keyboard
@@ -134,10 +133,6 @@ Files and Directories
* lufa/ - LUFA USB stack
* vusb/ - Objective Development V-USB
* ps2.c - PS/2 protocol
-* adb.c - Apple Desktop Bus protocol
-* m0110.c - Macintosh 128K/512K/Plus keyboard protocol
-* news.c - Sony NEWS keyboard protocol
-* x68k.c - Sharp X68000 keyboard protocol
* serial_soft.c - Asynchronous Serial protocol implemented by software