summaryrefslogtreecommitdiff
path: root/tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp')
-rw-r--r--tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp98
1 files changed, 98 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp
new file mode 100644
index 0000000000..8e70c3c299
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/mbed/freopen/TextLCD.cpp
@@ -0,0 +1,98 @@
+/* mbed TextLCD Library
+ * Copyright (c) 2007-2009 sford
+ * Released under the MIT License: http://mbed.org/license/mit
+ */
+
+#include "TextLCD.h"
+#include "mbed.h"
+
+/*
+ * useful info found at http://www.a-netz.de/lcd.en.php
+ *
+ * Initialisation
+ * ==============
+ *
+ * After attaching the supply voltage/after a reset, the display needs to be brought in to a defined state
+ *
+ * - wait approximately 15 ms so the display is ready to execute commands
+ * - Execute the command 0x30 ("Display Settings") three times (wait 1,64ms after each command, the busy flag cannot be queried now).
+ * - The display is in 8 bit mode, so if you have only connected 4 data pins you should only transmit the higher nibble of each command.
+ * - If you want to use the 4 bit mode, now you can execute the command to switch over to this mode now.
+ * - Execute the "clear display" command
+ *
+ * Timing
+ * ======
+ *
+ * Nearly all commands transmitted to the display need 40us for execution.
+ * Exceptions are the commands "Clear Display and Reset" and "Set Cursor to Start Position"
+ * These commands need 1.64ms for execution. These timings are valid for all displays working with an
+ * internal clock of 250kHz. But I do not know any displays that use other frequencies. Any time you
+ * can use the busy flag to test if the display is ready to accept the next command.
+ *
+ * _e is kept high apart from calling clock
+ * _rw is kept 0 (write) apart from actions that uyse it differently
+ * _rs is set by the data/command writes
+ */
+
+TextLCD::TextLCD(PinName rs, PinName rw, PinName e, PinName d0, PinName d1,
+ PinName d2, PinName d3, const char *name) : TextDisplay(name), _rw(rw), _rs(rs),
+ _e(e), _d(d0, d1, d2, d3) {
+
+ _rw = 0;
+ _e = 1;
+ _rs = 0; // command mode
+
+ // Should theoretically wait 15ms, but most things will be powered up pre-reset
+ // so i'll disable that for the minute. If implemented, could wait 15ms post reset
+ // instead
+ // wait(0.015);
+
+ // send "Display Settings" 3 times (Only top nibble of 0x30 as we've got 4-bit bus)
+ for(int i=0; i<3; i++) {
+ writeByte(0x3);
+ wait(0.00164); // this command takes 1.64ms, so wait for it
+ }
+ writeByte(0x2); // 4-bit mode
+
+ writeCommand(0x28); // Function set 001 BW N F - -
+ writeCommand(0x0C);
+ writeCommand(0x6); // Cursor Direction and Display Shift : 0000 01 CD S (CD 0-left, 1-right S(hift) 0-no, 1-yes
+ cls();
+}
+
+void TextLCD::character(int column, int row, int c) {
+ int address = 0x80 + (row * 40) + column; // memory starts at 0x80, and is 40 chars long per row
+ writeCommand(address);
+ writeData(c);
+}
+
+int TextLCD::columns() {
+ return 16;
+}
+
+int TextLCD::rows() {
+ return 2;
+}
+
+void TextLCD::writeByte(int value) {
+ _d = value >> 4;
+ wait(0.000040f); // most instructions take 40us
+ _e = 0;
+ wait(0.000040f);
+ _e = 1;
+ _d = value >> 0;
+ wait(0.000040f);
+ _e = 0;
+ wait(0.000040f); // most instructions take 40us
+ _e = 1;
+}
+
+void TextLCD::writeCommand(int command) {
+ _rs = 0;
+ writeByte(command);
+}
+
+void TextLCD::writeData(int data) {
+ _rs = 1;
+ writeByte(data);
+}