1 files changed, 396 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L1/serial_api.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L1/serial_api.c
new file mode 100755
index 0000000000..7698824df8
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32L1/serial_api.c
@@ -0,0 +1,396 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+
+#define UART_NUM (5)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0};
+
+static uart_irq_handler irq_handler;
+
+UART_HandleTypeDef UartHandle;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+static void init_uart(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+    UartHandle.Init.BaudRate   = obj->baudrate;
+    UartHandle.Init.WordLength = obj->databits;
+    UartHandle.Init.StopBits   = obj->stopbits;
+    UartHandle.Init.Parity     = obj->parity;
+    UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
+
+    if (obj->pin_rx == NC) {
+        UartHandle.Init.Mode = UART_MODE_TX;
+    } else if (obj->pin_tx == NC) {
+        UartHandle.Init.Mode = UART_MODE_RX;
+    } else {
+        UartHandle.Init.Mode = UART_MODE_TX_RX;
+    }
+
+    HAL_UART_Init(&UartHandle);
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+    // Determine the UART to use (UART_1, UART_2, ...)
+    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+    // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+    obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+    MBED_ASSERT(obj->uart != (UARTName)NC);
+
+    // Enable UART clock
+    if (obj->uart == UART_1) {
+        __USART1_CLK_ENABLE();
+        obj->index = 0;
+    }
+
+    if (obj->uart == UART_2) {
+        __USART2_CLK_ENABLE();
+        obj->index = 1;
+    }
+
+    if (obj->uart == UART_3) {
+        __USART3_CLK_ENABLE();
+        obj->index = 2;
+    }
+
+#if defined(USART4_BASE)
+    if (obj->uart == UART_4) {
+        __UART4_CLK_ENABLE();
+        obj->index = 3;
+    }
+#endif
+#if defined(USART5_BASE)
+    if (obj->uart == UART_5) {
+        __UART5_CLK_ENABLE();
+        obj->index = 4;
+    }
+#endif
+
+    // Configure the UART pins
+    pinmap_pinout(tx, PinMap_UART_TX);
+    pinmap_pinout(rx, PinMap_UART_RX);
+    if (tx != NC) {
+        pin_mode(tx, PullUp);
+    }
+    if (rx != NC) {
+        pin_mode(rx, PullUp);
+    }
+
+    // Configure UART
+    obj->baudrate = 9600;
+    obj->databits = UART_WORDLENGTH_8B;
+    obj->stopbits = UART_STOPBITS_1;
+    obj->parity   = UART_PARITY_NONE;
+    obj->pin_tx   = tx;
+    obj->pin_rx   = rx;
+
+    init_uart(obj);
+
+    // For stdio management
+    if (obj->uart == STDIO_UART) {
+        stdio_uart_inited = 1;
+        memcpy(&stdio_uart, obj, sizeof(serial_t));
+    }
+}
+
+void serial_free(serial_t *obj)
+{
+    // Reset UART and disable clock
+    if (obj->uart == UART_1) {
+        __USART1_FORCE_RESET();
+        __USART1_RELEASE_RESET();
+        __USART1_CLK_DISABLE();
+    }
+
+    if (obj->uart == UART_2) {
+        __USART2_FORCE_RESET();
+        __USART2_RELEASE_RESET();
+        __USART2_CLK_DISABLE();
+    }
+
+    if (obj->uart == UART_3) {
+        __USART3_FORCE_RESET();
+        __USART3_RELEASE_RESET();
+        __USART3_CLK_DISABLE();
+    }
+
+#if defined(USART4_BASE)
+    if (obj->uart == UART_4) {
+        __UART4_FORCE_RESET();
+        __UART4_RELEASE_RESET();
+        __UART4_CLK_DISABLE();
+    }
+#endif
+#if defined(USART5_BASE)
+    if (obj->uart == UART_5) {
+        __UART5_FORCE_RESET();
+        __UART5_RELEASE_RESET();
+        __UART5_CLK_DISABLE();
+    }
+#endif
+
+    // Configure GPIOs
+    pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+    serial_irq_ids[obj->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+    obj->baudrate = baudrate;
+    init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+    if (data_bits == 9) {
+        obj->databits = UART_WORDLENGTH_9B;
+    } else {
+        obj->databits = UART_WORDLENGTH_8B;
+    }
+
+    switch (parity) {
+        case ParityOdd:
+        case ParityForced0:
+            obj->parity = UART_PARITY_ODD;
+            break;
+        case ParityEven:
+        case ParityForced1:
+            obj->parity = UART_PARITY_EVEN;
+            break;
+        default: // ParityNone
+            obj->parity = UART_PARITY_NONE;
+            break;
+    }
+
+    if (stop_bits == 2) {
+        obj->stopbits = UART_STOPBITS_2;
+    } else {
+        obj->stopbits = UART_STOPBITS_1;
+    }
+
+    init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(UARTName name, int id)
+{
+    UartHandle.Instance = (USART_TypeDef *)name;
+    if (serial_irq_ids[id] != 0) {
+        if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
+            irq_handler(serial_irq_ids[id], TxIrq);
+            __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TC);
+        }
+        if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
+            irq_handler(serial_irq_ids[id], RxIrq);
+            __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
+        }
+    }
+}
+
+static void uart1_irq(void)
+{
+    uart_irq(UART_1, 0);
+}
+
+static void uart2_irq(void)
+{
+    uart_irq(UART_2, 1);
+}
+
+static void uart3_irq(void)
+{
+    uart_irq(UART_3, 2);
+}
+
+#if defined(USART4_BASE)
+static void uart4_irq(void)
+{
+    uart_irq(UART_4, 3);
+}
+#endif
+
+#if defined(USART5_BASE)
+static void uart5_irq(void)
+{
+    uart_irq(UART_5, 4);
+}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+    irq_handler = handler;
+    serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+    IRQn_Type irq_n = (IRQn_Type)0;
+    uint32_t vector = 0;
+
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+    if (obj->uart == UART_1) {
+        irq_n = USART1_IRQn;
+        vector = (uint32_t)&uart1_irq;
+    }
+
+    if (obj->uart == UART_2) {
+        irq_n = USART2_IRQn;
+        vector = (uint32_t)&uart2_irq;
+    }
+
+    if (obj->uart == UART_3) {
+        irq_n = USART3_IRQn;
+        vector = (uint32_t)&uart3_irq;
+    }
+
+#if defined(USART4_BASE)
+    if (obj->uart == UART_4) {
+        irq_n = UART4_IRQn;
+        vector = (uint32_t)&uart4_irq;
+    }
+#endif
+
+#if defined(USART5_BASE)
+    if (obj->uart == UART_5) {
+        irq_n = UART5_IRQn;
+        vector = (uint32_t)&uart5_irq;
+    }
+#endif
+
+    if (enable) {
+
+        if (irq == RxIrq) {
+            __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
+        } else { // TxIrq
+            __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
+        }
+
+        NVIC_SetVector(irq_n, vector);
+        NVIC_EnableIRQ(irq_n);
+
+    } else { // disable
+
+        int all_disabled = 0;
+
+        if (irq == RxIrq) {
+            __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
+            // Check if TxIrq is disabled too
+            if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
+        } else { // TxIrq
+            __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
+            // Check if RxIrq is disabled too
+            if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
+        }
+
+        if (all_disabled) NVIC_DisableIRQ(irq_n);
+
+    }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+    USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+    while (!serial_readable(obj));
+    return (int)(uart->DR & 0xFF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+    USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+    while (!serial_writable(obj));
+    uart->DR = (uint32_t)(c & 0xFF);
+}
+
+int serial_readable(serial_t *obj)
+{
+    int status;
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    // Check if data is received
+    status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
+    return status;
+}
+
+int serial_writable(serial_t *obj)
+{
+    int status;
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    // Check if data is transmitted
+    status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
+    return status;
+}
+
+void serial_clear(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_TXE);
+    __HAL_UART_CLEAR_FLAG(&UartHandle, UART_FLAG_RXNE);
+}
+
+void serial_pinout_tx(PinName tx)
+{
+    pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    HAL_LIN_SendBreak(&UartHandle);
+}
+
+void serial_break_clear(serial_t *obj)
+{
+}
+
+#endif