diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c new file mode 100644 index 0000000000..4a77084092 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_DISCO_F051R8/PeripheralPins.c @@ -0,0 +1,151 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#include "PeripheralPins.h" + +// ===== +// Note: Commented lines are alternative possibilities which are not used per default. +// If you change them, you will have also to modify the corresponding xxx_api.c file +// for pwmout, analogin, analogout, ... +// ===== + +//*** ADC *** + +const PinMap PinMap_ADC[] = { + {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN0 + {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1 + {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2 + {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3 + {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4 + {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN5 + {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6 + {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7 + {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8 + {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9 + {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN10 + {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11 + {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12 + {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13 + {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN14 + {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN15 + {NC, NC, 0} +}; + +//*** I2C *** + +const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {NC, NC, 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {NC, NC, 0} +}; + +//*** PWM *** + +// TIM1 cannot be used because already used by the us_ticker +const PinMap PinMap_PWM[] = { + {PA_4, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1 + {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1 +// {PA_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM16)}, // TIM16_CH1 + {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2 +// {PA_7, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_TIM14)}, // TIM14_CH1 +// {PA_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_TIM17)}, // TIM17_CH1 + {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3 + {PB_1, PWM_14, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_TIM14)}, // TIM14_CH1 +// {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4 + {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1 + {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2 + {PB_6, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1N + {PB_7, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1N + {PB_8, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM16)}, // TIM16_CH1 + {PB_9, PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF2_TIM17)}, // TIM17_CH1 + {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH1 + {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM15)}, // TIM15_CH2 +// {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_TIM15)}, // TIM15_CH1N + {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH1 + {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH2 + {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH3 + {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF1_TIM3)}, // TIM3_CH4 + {NC, NC, 0} +}; + +//*** SERIAL *** + +const PinMap PinMap_UART_TX[] = { + {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NC, 0} +}; + +const PinMap PinMap_UART_RX[] = { + {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NC, 0} +}; + +//*** SPI *** + +const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLDOWN, GPIO_AF0_SPI2)}, + {NC, NC, 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI1)}, + {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF0_SPI2)}, + {NC, NC, 0} +}; |