summaryrefslogtreecommitdiff
path: root/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c')
-rw-r--r--tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c528
1 files changed, 528 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c
new file mode 100644
index 0000000000..be390f7a71
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC43XX/ethernet_api.c
@@ -0,0 +1,528 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Contribution by Nitin Bhaskar(nitin.bhaskar.27.09@gmail.com)
+ */
+#include "ethernet_api.h"
+
+#include <string.h>
+#include "cmsis.h"
+#include "mbed_interface.h"
+#include "toolchain.h"
+#include "mbed_error.h"
+#include "pinmap.h"
+
+#define NEW_LOGIC 0
+#define NEW_ETH_BUFFER 0
+
+#if NEW_ETH_BUFFER
+
+#define NUM_RX_FRAG 4 // Number of Rx Fragments (== packets)
+#define NUM_TX_FRAG 3 // Number of Tx Fragments (== packets)
+
+#define ETH_MAX_FLEN 1536 // Maximum Ethernet Frame Size
+#define ETH_FRAG_SIZE ETH_MAX_FLEN // Packet Fragment size (same as packet length)
+
+#else
+
+// Memfree calculation:
+// (16 * 1024) - ((2 * 4 * NUM_RX) + (2 * 4 * NUM_RX) + (0x300 * NUM_RX) +
+// (2 * 4 * NUM_TX) + (1 * 4 * NUM_TX) + (0x300 * NUM_TX)) = 8556
+/* EMAC Memory Buffer configuration for 16K Ethernet RAM. */
+#define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */
+#define NUM_TX_FRAG 3 /* Num.of TX Fragments 3*1536= 4.6kB */
+//#define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */
+
+//#define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */
+#define ETH_FRAG_SIZE 0x300 /* Packet Fragment size 1536/2 Bytes */
+#define ETH_MAX_FLEN 0x300 /* Max. Ethernet Frame Size */
+
+const int ethernet_MTU_SIZE = 0x300;
+
+#endif
+
+#define ETHERNET_ADDR_SIZE 6
+
+/* Descriptors Fields bits */
+#define TRDES_OWN_BIT (1U<<31) /* Own bit in RDES0 & TDES0 */
+#define RX_END_RING (1<<15) /* Receive End of Ring bit in RDES1 */
+#define RX_NXTDESC_FLAG (1<<14) /* Second Address Chained bit in RDES1 */
+#define TX_LAST_SEGM (1<<29) /* Last Segment bit in TDES0 */
+#define TX_FIRST_SEGM (1<<28) /* First Segment bit in TDES0 */
+#define TX_END_RING (1<<21) /* Transmit End of Ring bit in TDES0 */
+#define TX_NXTDESC_FLAG (1<<20) /* Second Address Chained bit in TDES0 */
+
+PACKED struct RX_DESC_TypeDef { /* RX Descriptor struct */
+ unsigned int Status;
+ unsigned int Ctrl;
+ unsigned int BufAddr1;
+ unsigned int NextDescAddr;
+};
+typedef struct RX_DESC_TypeDef RX_DESC_TypeDef;
+
+PACKED struct TX_DESC_TypeDef { /* TX Descriptor struct */
+ unsigned int Status;
+ unsigned int Ctrl;
+ unsigned int BufAddr1;
+ unsigned int NextDescAddr;
+};
+typedef struct TX_DESC_TypeDef TX_DESC_TypeDef;
+
+/* ETHMODE RMII SELECT */
+#define RMII_SELECT 0x04
+/* define to tell PHY about write operation */
+#define MII_WRITE (1 << 1)
+/* define to tell PHY about read operation */
+#define MII_READ (0 << 1)
+/* define to enable duplex mode */
+#define MAC_DUPLEX_MODE (1 << 11)
+
+/* MAC_FRAME_FILTER register bit defines */
+#define MAC_FRAME_FILTER_PR (1 << 0) /* Promiscuous Mode */
+#define MAC_FRAME_FILTER_RA (1UL << 31) /* Receive all */
+
+/* MAC_CONFIG register bit defines */
+#define MAC_CONFIG_RE (1 << 2) /* Receiver enable */
+#define MAC_CONFIG_TE (1 << 3) /* Transmitter Enable */
+
+/* DMA_OP_MODE register bit defines */
+#define DMA_OP_MODE_SSR (1 << 1) /* Start/stop receive */
+#define DMA_OP_MODE_SST (1 << 13) /* Start/Stop Transmission Command */
+
+/* DMA_INT_EN register bit defines */
+#define DMA_INT_EN_TIE (1 << 0) /* Transmit interrupt enable */
+#define DMA_INT_EN_TSE (1 << 1) /* Transmit stopped enable */
+#define DMA_INT_EN_TUE (1 << 2) /* Transmit buffer unavailable enable */
+#define DMA_INT_EN_TJE (1 << 3) /* Transmit jabber timeout enable */
+#define DMA_INT_EN_OVE (1 << 4) /* Overflow interrupt enable */
+#define DMA_INT_EN_UNE (1 << 5) /* Underflow interrupt enable */
+#define DMA_INT_EN_RIE (1 << 6) /* Receive interrupt enable */
+#define DMA_INT_EN_RUE (1 << 7) /* Receive buffer unavailable enable */
+#define DMA_INT_EN_RSE (1 << 8) /* Received stopped enable */
+#define DMA_INT_EN_RWE (1 << 9) /* Receive watchdog timeout enable */
+#define DMA_INT_EN_ETE (1 << 10) /* Early transmit interrupt enable */
+#define DMA_INT_EN_FBE (1 << 13) /* Fatal bus error enable */
+#define DMA_INT_EN_ERE (1 << 14) /* Early receive interrupt enable */
+#define DMA_INT_EN_AIE (1 << 15) /* Abnormal interrupt summary enable */
+#define DMA_INT_EN_NIE (1 << 16) /* Normal interrupt summary enable */
+
+
+
+/* PHY Support Register */
+#define SUPP_SPEED 0x00004000 /* Reduced MII Logic Current Speed */
+//#define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */
+#define SUPP_RES_RMII 0x00000000 /* Reset Reduced MII Logic */
+
+/* MII Management Command Register */
+#define MCMD_READ 0x00000001 /* MII Read */
+#define MCMD_SCAN 0x00000002 /* MII Scan continuously */
+
+#define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
+#define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
+
+/* MII Management Address Register */
+#define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */
+#define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
+
+/* MII Management Indicators Register */
+#define MIND_BUSY 0x00000001 /* MII is Busy */
+#define MIND_SCAN 0x00000002 /* MII Scanning in Progress */
+#define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */
+#define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */
+
+/* DP83848C PHY Registers */
+#define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
+#define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
+#define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
+#define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
+#define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
+#define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
+#define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
+#define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
+
+/* PHY Extended Registers */
+#define PHY_REG_STS 0x10 /* Status Register */
+#define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
+#define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
+#define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
+#define PHY_REG_RECR 0x15 /* Receive Error Counter */
+#define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
+#define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
+#define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
+#define PHY_REG_PHYCR 0x19 /* PHY Control Register */
+#define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
+#define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
+#define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
+
+#define PHY_REG_SCSR 0x1F /* PHY Special Control/Status Register */
+
+#define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
+#define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
+#define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
+#define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
+#define PHY_AUTO_NEG 0x1000 /* Select Auto Negotiation */
+
+#define DP83848C_DEF_ADR 0x01 /* Default PHY device address */
+#define DP83848C_ID 0x20005C90 /* PHY Identifier - DP83848C */
+
+#define LAN8720_ID 0x0007C0F0 /* PHY Identifier - LAN8720 */
+
+#define PHY_STS_LINK 0x0001 /* PHY Status Link Mask */
+#define PHY_STS_SPEED 0x0002 /* PHY Status Speed Mask */
+#define PHY_STS_DUPLEX 0x0004 /* PHY Status Duplex Mask */
+
+#define PHY_BMCR_RESET 0x8000 /* PHY Reset */
+
+#define PHY_BMSR_LINK 0x0004 /* PHY BMSR Link valid */
+
+#define PHY_SCSR_100MBIT 0x0008 /* Speed: 1=100 MBit, 0=10Mbit */
+#define PHY_SCSR_DUPLEX 0x0010 /* PHY Duplex Mask */
+
+static int phy_read(unsigned int PhyReg);
+static int phy_write(unsigned int PhyReg, unsigned short Data);
+
+static void txdscr_init(void);
+static void rxdscr_init(void);
+
+#if defined (__ICCARM__)
+# define AHBSRAM1
+#elif defined(TOOLCHAIN_GCC_CR)
+# define AHBSRAM1 __attribute__((section(".data.$RamPeriph32")))
+#else
+# define AHBSRAM1 __attribute__((section("AHBSRAM1"),aligned))
+#endif
+
+AHBSRAM1 volatile uint8_t rxbuf[NUM_RX_FRAG][ETH_FRAG_SIZE];
+AHBSRAM1 volatile uint8_t txbuf[NUM_TX_FRAG][ETH_FRAG_SIZE];
+AHBSRAM1 volatile RX_DESC_TypeDef rxdesc[NUM_RX_FRAG];
+AHBSRAM1 volatile TX_DESC_TypeDef txdesc[NUM_TX_FRAG];
+
+#ifndef min
+#define min(x, y) (((x)<(y))?(x):(y))
+#endif
+
+static uint32_t phy_id = 0;
+static uint32_t TxDescIndex = 0;
+static uint32_t RxDescIndex = 0;
+static uint32_t RxOffset = 0;
+
+/*----------------------------------------------------------------------------
+ Ethernet Device initialize
+ *----------------------------------------------------------------------------*/
+int ethernet_init()
+{
+ int regv, tout;
+ char mac[ETHERNET_ADDR_SIZE];
+
+ pin_function(PC_0, (SCU_MODE_INACT | FUNC3)); /* Enable ENET RX CLK */
+ pin_function(P1_19, (SCU_MODE_INACT | FUNC0)); /* Enable ENET TX CLK */
+
+ /* Ethernet pinmuxing */
+ pin_function(P2_0, SCU_PINIO_FAST | FUNC7); /* ENET_MDC */
+ pin_function(P1_17, SCU_PINIO_FAST | FUNC3); /* ENET_MDIO */
+ pin_function(P1_18, SCU_PINIO_FAST | FUNC3); /* ENET_TXD0 */
+ pin_function(P1_20, SCU_PINIO_FAST | FUNC3); /* ENET_TXD1 */
+ pin_function(P1_19, SCU_PINIO_FAST | FUNC0); /* ENET_REF */
+ pin_function(P0_1, SCU_PINIO_FAST | FUNC6); /* ENET_TX_EN */
+ pin_function(P1_15, SCU_PINIO_FAST | FUNC3); /* ENET_RXD0 */
+ pin_function(P0_0, SCU_PINIO_FAST | FUNC2); /* ENET_RXD1 */
+ pin_function(P1_16, SCU_PINIO_FAST | FUNC3); /* ENET_CRS */
+ pin_function(PC_9, SCU_PINIO_FAST | FUNC3); /* ENET_RX_ER */
+ pin_function(P1_16, SCU_PINIO_FAST | FUNC7); /* ENET_RXDV */
+
+ LPC_CREG->CREG6 |= RMII_SELECT;
+
+ /* perform RGU soft reset */
+ LPC_RGU->RESET_CTRL0 = 1 << 22;
+ LPC_RGU->RESET_CTRL0 = 0;
+
+ /* Wait until reset is performed */
+ while(1) {
+ if (LPC_RGU->RESET_ACTIVE_STATUS0 & (1 << 22))
+ break;
+ }
+
+ /* Reset MAC DMA Controller */
+ LPC_ETHERNET->DMA_BUS_MODE |= 0x01;
+ while(LPC_ETHERNET->DMA_BUS_MODE & 0x01);
+
+ phy_write(PHY_REG_BMCR, PHY_BMCR_RESET); /* perform PHY reset */
+
+ for(tout = 0x20000; ; tout--) { /* Wait for hardware reset to end. */
+ regv = phy_read(PHY_REG_BMCR);
+ if(regv < 0 || tout == 0) {
+ return -1; /* Error */
+ }
+ if(!(regv & PHY_BMCR_RESET)) {
+ break; /* Reset complete. */
+ }
+ }
+
+ phy_id = (phy_read(PHY_REG_IDR1) << 16);
+ phy_id |= (phy_read(PHY_REG_IDR2) & 0XFFF0);
+
+ if (phy_id != DP83848C_ID && phy_id != LAN8720_ID) {
+ error("Unknown Ethernet PHY (%x)", (unsigned int)phy_id);
+ }
+
+ ethernet_set_link(-1, 0);
+
+ /* Set the Ethernet MAC Address registers */
+ ethernet_address(mac);
+ LPC_ETHERNET->MAC_ADDR0_HIGH = (mac[5] << 8) | mac[4];
+ LPC_ETHERNET->MAC_ADDR0_LOW = (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0];
+
+ txdscr_init(); /* initialize DMA TX Descriptor */
+ rxdscr_init(); /* initialize DMA RX Descriptor */
+
+ /* Configure Filter */
+ LPC_ETHERNET->MAC_FRAME_FILTER = MAC_FRAME_FILTER_PR | MAC_FRAME_FILTER_RA;
+
+ /* Enable Receiver and Transmitter */
+ LPC_ETHERNET->MAC_CONFIG |= (MAC_CONFIG_RE | MAC_CONFIG_TE);
+
+ //LPC_ETHERNET->DMA_INT_EN = DMA_INT_EN_NIE | DMA_INT_EN_RIE | DMA_INT_EN_TJE; /* Enable EMAC interrupts. */
+
+ /* Start Transmission & Receive processes */
+ LPC_ETHERNET->DMA_OP_MODE |= (DMA_OP_MODE_SST | DMA_OP_MODE_SSR);
+
+ return 0;
+}
+
+/*----------------------------------------------------------------------------
+ Ethernet Device Uninitialize
+ *----------------------------------------------------------------------------*/
+void ethernet_free()
+{
+}
+
+/*----------------------------------------------------------------------------
+ Ethernet write
+ *----------------------------------------------------------------------------*/
+int ethernet_write(const char *data, int slen)
+{
+ if (slen > ETH_FRAG_SIZE)
+ return -1;
+
+ txdesc[TxDescIndex].Ctrl = slen;
+ memcpy((void *)txdesc[TxDescIndex].BufAddr1, data, slen);
+ return slen;
+}
+
+/*----------------------------------------------------------------------------
+ Ethernet Send
+ *----------------------------------------------------------------------------*/
+int ethernet_send()
+{
+ int s = txdesc[TxDescIndex].Ctrl;
+ txdesc[TxDescIndex].Status |= TRDES_OWN_BIT;
+ LPC_ETHERNET->DMA_TRANS_POLL_DEMAND = 1; // Wake Up the DMA if it's in Suspended Mode
+ TxDescIndex++;
+ if (TxDescIndex == NUM_TX_FRAG)
+ TxDescIndex = 0;
+
+ return s;
+}
+
+/*----------------------------------------------------------------------------
+ Ethernet receive
+ *----------------------------------------------------------------------------*/
+int ethernet_receive()
+{
+ int i, slen = 0;
+ for (i = RxDescIndex;; i++) {
+ if (rxdesc[i].Status & TRDES_OWN_BIT)
+ return (slen - RxOffset);
+ else
+ slen += (rxdesc[i].Status >> 16) & 0x03FFF;
+ }
+ return 0;
+}
+
+
+/*----------------------------------------------------------------------------
+ Ethernet read
+ *----------------------------------------------------------------------------*/
+int ethernet_read(char *data, int dlen)
+{
+ int copylen;
+ uint32_t *pSrc = (uint32_t *)rxdesc[RxDescIndex].BufAddr1;
+ copylen = (rxdesc[RxDescIndex].Status >> 16) & 0x03FFF;
+ if (rxdesc[RxDescIndex].Status & TRDES_OWN_BIT || (dlen + RxOffset) > copylen)
+ return -1;
+
+ if ((dlen + RxOffset) == copylen) {
+ memcpy(&pSrc[RxOffset], data, copylen);
+ rxdesc[RxDescIndex].Status = TRDES_OWN_BIT;
+ RxDescIndex++;
+ RxOffset = 0;
+ if (RxDescIndex == NUM_RX_FRAG)
+ RxDescIndex = 0;
+ } else if ((dlen + RxOffset) < copylen) {
+ copylen = dlen;
+ memcpy(&pSrc[RxOffset], data, copylen);
+ RxOffset += dlen;
+ }
+ return copylen;
+}
+
+int ethernet_link(void)
+{
+
+ if (phy_id == DP83848C_ID) {
+ return (phy_read(PHY_REG_STS) & PHY_STS_LINK);
+ } else { // LAN8720_ID
+ return (phy_read(PHY_REG_BMSR) & PHY_BMSR_LINK);
+ }
+}
+
+static int phy_write(unsigned int PhyReg, unsigned short Data)
+{
+ unsigned int timeOut;
+
+ while(LPC_ETHERNET->MAC_MII_ADDR & MIND_BUSY);
+ LPC_ETHERNET->MAC_MII_ADDR = (DP83848C_DEF_ADR<<11) | (PhyReg<<6) | MII_WRITE;
+ LPC_ETHERNET->MAC_MII_DATA = Data;
+ LPC_ETHERNET->MAC_MII_ADDR |= MIND_BUSY; // Start PHY Write Cycle
+
+ /* Wait utill operation completed */
+ for (timeOut = 0; timeOut < MII_WR_TOUT; timeOut++) {
+ if ((LPC_ETHERNET->MAC_MII_ADDR & MIND_BUSY) == 0) {
+ break;
+ }
+ }
+
+ return -1;
+}
+
+static int phy_read(unsigned int PhyReg)
+{
+ unsigned int timeOut;
+
+ while(LPC_ETHERNET->MAC_MII_ADDR & MIND_BUSY);
+ LPC_ETHERNET->MAC_MII_ADDR = (DP83848C_DEF_ADR<<11) | (PhyReg<<6) | MII_READ;
+ LPC_ETHERNET->MAC_MII_ADDR |= MIND_BUSY;
+
+ for(timeOut = 0; timeOut < MII_RD_TOUT; timeOut++) { /* Wait until operation completed */
+ if((LPC_ETHERNET->MAC_MII_ADDR & MIND_BUSY) == 0) {
+ return LPC_ETHERNET->MAC_MII_DATA; /* Return a 16-bit value. */
+ }
+ }
+
+ return -1;
+}
+
+static void txdscr_init()
+{
+ int i;
+
+ for(i = 0; i < NUM_TX_FRAG; i++) {
+ txdesc[i].Status = TX_LAST_SEGM | TX_FIRST_SEGM;;
+ txdesc[i].Ctrl = 0;
+ txdesc[i].BufAddr1 = (uint32_t)&txbuf[i];
+ if (i == (NUM_RX_FRAG - 1)) {
+ txdesc[i].Status |= TX_END_RING;
+ }
+ }
+
+ LPC_ETHERNET->DMA_TRANS_DES_ADDR = (uint32_t)txdesc; /* Set EMAC Transmit Descriptor Registers. */
+}
+
+
+static void rxdscr_init()
+{
+ int i;
+
+ for(i = 0; i < NUM_RX_FRAG; i++) {
+ rxdesc[i].Status = TRDES_OWN_BIT;
+ rxdesc[i].Ctrl = ETH_FRAG_SIZE;
+ rxdesc[i].BufAddr1 = (uint32_t)&rxbuf[i];
+ if (i == (NUM_RX_FRAG - 1)) {
+ rxdesc[i].Ctrl |= RX_END_RING;
+ }
+ }
+
+ LPC_ETHERNET->DMA_REC_DES_ADDR = (uint32_t)rxdesc; /* Set EMAC Receive Descriptor Registers. */
+}
+
+void ethernet_address(char *mac)
+{
+ mbed_mac_address(mac);
+}
+
+void ethernet_set_link(int speed, int duplex)
+{
+ volatile unsigned short phy_data;
+ int tout;
+
+ if((speed < 0) || (speed > 1)) {
+
+ phy_data = PHY_AUTO_NEG;
+
+ } else {
+
+ phy_data = (((unsigned short) speed << 13) |
+ ((unsigned short) duplex << 8));
+ }
+
+ phy_write(PHY_REG_BMCR, phy_data);
+
+ for(tout = 100; tout; tout--) {
+ __NOP(); /* A short delay */
+ }
+
+ switch(phy_id) {
+ case DP83848C_ID:
+
+ phy_data = phy_read(PHY_REG_STS);
+
+ if(phy_data & PHY_STS_DUPLEX) {
+ /* Full duplex is enabled. */
+ LPC_ETHERNET->MAC_CONFIG |= MAC_DUPLEX_MODE;
+ } else {
+ LPC_ETHERNET->MAC_CONFIG &= ~MAC_DUPLEX_MODE;
+ }
+
+ if(phy_data & PHY_STS_SPEED) {
+ LPC_ETHERNET->MAC_CONFIG &= ~SUPP_SPEED;
+ } else {
+ LPC_ETHERNET->MAC_CONFIG |= SUPP_SPEED;
+ }
+ break;
+
+ case LAN8720_ID:
+
+ for(tout = 100; tout; tout--) {
+ phy_data = phy_read(PHY_REG_BMSR);
+ if (phy_data & PHY_STS_DUPLEX)
+ break;
+ }
+
+ if (phy_data & PHY_STS_DUPLEX) {
+ /* Full duplex is enabled. */
+ LPC_ETHERNET->MAC_CONFIG |= MAC_DUPLEX_MODE;
+ } else {
+ LPC_ETHERNET->MAC_CONFIG &= ~MAC_DUPLEX_MODE;
+ }
+
+ if(phy_data & PHY_STS_SPEED) {
+ LPC_ETHERNET->MAC_CONFIG &= ~SUPP_SPEED;
+ } else {
+ LPC_ETHERNET->MAC_CONFIG |= SUPP_SPEED;
+ }
+ break;
+ }
+}
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-01 20:55:11 +0000