1 files changed, 176 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/PinNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/PinNames.h
new file mode 100644
index 0000000000..9a0e81a15b
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/PinNames.h
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC11U Pin Names
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+    P0_24 = 24,
+    P0_25 = 25,
+    P0_26 = 26,
+    P0_27 = 27,
+
+    P1_0 = 32,
+    P1_1 = 33,
+    P1_2 = 34,
+    P1_3 = 35,
+    P1_4 = 36,
+    P1_5 = 37,
+    P1_6 = 38,
+    P1_7 = 39,
+    P1_8 = 40,
+    P1_9 = 41,
+    P1_10 = 42,
+    P1_11 = 43,
+    P1_12 = 44,
+    P1_13 = 45,
+    P1_14 = 46,
+    P1_15 = 47,
+    P1_16 = 48,
+    P1_17 = 49,
+    P1_18 = 50,
+    P1_19 = 51,
+    P1_20 = 52,
+    P1_21 = 53,
+    P1_22 = 54,
+    P1_23 = 55,
+    P1_24 = 56,
+    P1_25 = 57,
+    P1_26 = 58,
+    P1_27 = 59,
+    P1_28 = 60,
+    P1_29 = 61,
+
+    P1_31 = 63,
+
+    // LED Names
+    LED1 = P1_24,
+    LED2 = P1_25,
+    LED3 = P1_26,
+    LED4 = P0_0,
+    LED5 = P1_3,
+    LED6 = P1_2,
+    LED7 = P1_1,
+    LED8 = P1_0,
+
+    // BTN Names
+    BTN1 = P0_16,
+    BTN2 = P0_1,
+    
+    // UART
+    UART_TX = P0_19,
+    UART_RX = P0_18,
+
+    // Arduino Shield Receptacles Names
+    D0 = P0_18,
+    D1 = P0_19,
+    D2 = P1_17,
+    D3 = P1_24,
+    D4 = P1_5,
+    D5 = P0_1,
+    D6 = P1_27,
+    D7 = P0_7,
+    D8 = P0_2,
+    D9 = P1_25,
+    D10= P1_23,
+    D11= P0_21,
+    D12= P0_22,
+    D13= P1_15,
+    D14= P0_5,
+    D15= P0_4,
+
+    A0 = P0_11,
+    A1 = P0_12,
+    A2 = P0_13,
+    A3 = P0_16,
+    A4 = P0_5, // same port as SDA
+    A5 = P0_4, // same port as SCL
+    
+    SDA= P0_5, // same port as A4
+    SCL= P0_4, // same port as A5
+    
+    //SD Card pins
+    SDMOSI = P0_9,
+    SDMISO = P0_8,
+    SDSCLK = P1_29,
+    SDSSEL = P1_12,
+    
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    CHANNEL0 = FLEX_INT0_IRQn,
+    CHANNEL1 = FLEX_INT1_IRQn,
+    CHANNEL2 = FLEX_INT2_IRQn,
+    CHANNEL3 = FLEX_INT3_IRQn,
+    CHANNEL4 = FLEX_INT4_IRQn,
+    CHANNEL5 = FLEX_INT5_IRQn,
+    CHANNEL6 = FLEX_INT6_IRQn,
+    CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif