1 files changed, 117 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PeripheralPins.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PeripheralPins.c
new file mode 100644
index 0000000000..aba0732521
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PeripheralPins.c
@@ -0,0 +1,117 @@
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {P0_11, ADC0_0, 0x02},
+    {P0_12, ADC0_1, 0x02},
+    {P0_13, ADC0_2, 0x02},
+    {P0_14, ADC0_3, 0x02},
+    {P0_15, ADC0_4, 0x02},
+    {P0_16, ADC0_5, 0x01},
+    {P0_22, ADC0_6, 0x01},
+    {P0_23, ADC0_7, 0x01},
+    {NC   , NC    , 0   }
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {P0_5, I2C_0, 1},
+    {NC  , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {P0_4, I2C_0, 1},
+    {NC  , NC,    0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {P0_19, UART_0, 1},
+    {P1_13, UART_0, 3},
+    {P1_27, UART_0, 2},
+    { NC  , NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {P0_18, UART_0, 1},
+    {P1_14, UART_0, 3},
+    {P1_26, UART_0, 2},
+    {NC   , NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    {P0_6 , SPI_0, 0x02},
+    {P0_10, SPI_0, 0x02},
+    {P1_29, SPI_0, 0x01},
+    {P1_15, SPI_1, 0x03},
+    {P1_20, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {P0_9 , SPI_0, 0x01},
+    {P0_21, SPI_1, 0x02},
+    {P1_22, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {P0_8 , SPI_0, 0x01},
+    {P0_22, SPI_1, 0x03},
+    {P1_21, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {P0_2 , SPI_0, 0x01},
+    {P1_19, SPI_1, 0x02},
+    {P1_23, SPI_1, 0x02},
+    {NC   , NC   , 0}
+};
+
+/************PWM***************/
+/* To have a PWM where we can change both the period and the duty cycle,
+ * we need an entire timer. With the following conventions:
+ *   * MR3 is used for the PWM period
+ *   * MR0, MR1, MR2 are used for the duty cycle
+ */
+const PinMap PinMap_PWM[] = {
+    /* CT16B0 */
+    {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2},    /* MR0 */
+    {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2},   /* MR1 */
+    {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2},   /* MR2 */
+
+    /* CT16B1 */
+    {P0_21, PWM_4, 1},                      /* MR0 */
+    {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1},   /* MR1 */
+
+    /* CT32B0 */
+    {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1},   /* MR0 */
+    {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1},   /* MR1 */
+    {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1},   /* MR2 */
+
+    /* CT32B1 */
+    {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1},  /* MR0 */
+    {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1},  /* MR1 */
+    {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1},  /* MR2 */
+
+    {NC, NC, 0}
+};