diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301')
4 files changed, 429 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralNames.h new file mode 100644 index 0000000000..705034a2fb --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralNames.h @@ -0,0 +1,87 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_0 = (int)LPC_USART_BASE +} UARTName; + +typedef enum { + I2C_0 = (int)LPC_I2C_BASE +} I2CName; + +typedef enum { + ADC0_0 = 0, + ADC0_1, + ADC0_2, + ADC0_3, + ADC0_4, + ADC0_5, + ADC0_6, + ADC0_7 +} ADCName; + +typedef enum { + SPI_0 = (int)LPC_SSP0_BASE, + SPI_1 = (int)LPC_SSP1_BASE +} SPIName; + +typedef enum { + PWM_1 = 0, + PWM_2, + PWM_3, + PWM_4, + PWM_5, + PWM_6, + PWM_7, + PWM_8, + PWM_9, + PWM_10, + PWM_11 +} PWMName; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_0 + +// Default peripherals +#define MBED_SPI0 p5, p6, p7, p8 +#define MBED_SPI1 p11, p12, p13, p14 + +#define MBED_UART0 p9, p10 +#define MBED_UARTUSB USBTX, USBRX + +#define MBED_I2C0 p28, p27 + +#define MBED_ANALOGIN0 p15 +#define MBED_ANALOGIN1 p16 +#define MBED_ANALOGIN2 p17 +#define MBED_ANALOGIN3 p18 +#define MBED_ANALOGIN4 p19 +#define MBED_ANALOGIN5 p20 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralPins.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralPins.c new file mode 100644 index 0000000000..b583d12c1b --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PeripheralPins.c @@ -0,0 +1,117 @@ + +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "PeripheralPins.h" + +/************ADC***************/ +const PinMap PinMap_ADC[] = { + {P0_11, ADC0_0, 0x02}, + {P0_12, ADC0_1, 0x02}, + {P0_13, ADC0_2, 0x02}, + {P0_14, ADC0_3, 0x02}, + {P0_15, ADC0_4, 0x02}, + {P0_16, ADC0_5, 0x01}, + {P0_22, ADC0_6, 0x01}, + {P0_23, ADC0_7, 0x01}, + {NC , NC , 0 } +}; + +/************I2C***************/ +const PinMap PinMap_I2C_SDA[] = { + {P0_5, I2C_0, 1}, + {NC , NC , 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {P0_4, I2C_0, 1}, + {NC , NC, 0} +}; + +/************UART***************/ +const PinMap PinMap_UART_TX[] = { + {P0_19, UART_0, 1}, + {P1_13, UART_0, 3}, + {P1_27, UART_0, 2}, + { NC , NC , 0} +}; + +const PinMap PinMap_UART_RX[] = { + {P0_18, UART_0, 1}, + {P1_14, UART_0, 3}, + {P1_26, UART_0, 2}, + {NC , NC , 0} +}; + +/************SPI***************/ +const PinMap PinMap_SPI_SCLK[] = { + {P0_6 , SPI_0, 0x02}, + {P0_10, SPI_0, 0x02}, + {P1_29, SPI_0, 0x01}, + {P1_15, SPI_1, 0x03}, + {P1_20, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MOSI[] = { + {P0_9 , SPI_0, 0x01}, + {P0_21, SPI_1, 0x02}, + {P1_22, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {P0_8 , SPI_0, 0x01}, + {P0_22, SPI_1, 0x03}, + {P1_21, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {P0_2 , SPI_0, 0x01}, + {P1_19, SPI_1, 0x02}, + {P1_23, SPI_1, 0x02}, + {NC , NC , 0} +}; + +/************PWM***************/ +/* To have a PWM where we can change both the period and the duty cycle, + * we need an entire timer. With the following conventions: + * * MR3 is used for the PWM period + * * MR0, MR1, MR2 are used for the duty cycle + */ +const PinMap PinMap_PWM[] = { + /* CT16B0 */ + {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2}, /* MR0 */ + {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2}, /* MR1 */ + {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2}, /* MR2 */ + + /* CT16B1 */ + {P0_21, PWM_4, 1}, /* MR0 */ + {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1}, /* MR1 */ + + /* CT32B0 */ + {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1}, /* MR0 */ + {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1}, /* MR1 */ + {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1}, /* MR2 */ + + /* CT32B1 */ + {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1}, /* MR0 */ + {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1}, /* MR1 */ + {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1}, /* MR2 */ + + {NC, NC, 0} +}; diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h new file mode 100644 index 0000000000..6688e3caff --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/PinNames.h @@ -0,0 +1,166 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC11U Pin Names + P0_0 = 0, + P0_1 = 1, + P0_2 = 2, + P0_3 = 3, + P0_4 = 4, + P0_5 = 5, + P0_6 = 6, + P0_7 = 7, + P0_8 = 8, + P0_9 = 9, + P0_10 = 10, + P0_11 = 11, + P0_12 = 12, + P0_13 = 13, + P0_14 = 14, + P0_15 = 15, + P0_16 = 16, + P0_17 = 17, + P0_18 = 18, + P0_19 = 19, + P0_20 = 20, + P0_21 = 21, + P0_22 = 22, + P0_23 = 23, + P0_24 = 24, + P0_25 = 25, + P0_26 = 26, + P0_27 = 27, + + P1_0 = 32, + P1_1 = 33, + P1_2 = 34, + P1_3 = 35, + P1_4 = 36, + P1_5 = 37, + P1_6 = 38, + P1_7 = 39, + P1_8 = 40, + P1_9 = 41, + P1_10 = 42, + P1_11 = 43, + P1_12 = 44, + P1_13 = 45, + P1_14 = 46, + P1_15 = 47, + P1_16 = 48, + P1_17 = 49, + P1_18 = 50, + P1_19 = 51, + P1_20 = 52, + P1_21 = 53, + P1_22 = 54, + P1_23 = 55, + P1_24 = 56, + P1_25 = 57, + P1_26 = 58, + P1_27 = 59, + P1_28 = 60, + P1_29 = 61, + + P1_31 = 63, + + // mbed DIP Pin Names + p5 = P0_9, + p6 = P0_8, + p7 = P1_29, + p8 = P0_2, + p9 = P1_27, + p10 = P1_26, + p11 = P1_22, + p12 = P1_21, + p13 = P1_20, + p14 = P1_23, + p15 = P0_11, + p16 = P0_12, + p17 = P0_13, + p18 = P0_14, + p19 = P0_16, + p20 = P0_22, + p21 = P0_7, + p22 = P0_17, + p23 = P1_17, + p24 = P1_18, + p25 = P1_24, + p26 = P1_25, + p27 = P0_4, + p28 = P0_5, + p29 = P1_5, + p30 = P1_2, + + p33 = P0_3, + p34 = P1_15, + p35 = P0_20, + p36 = P0_21, + + // Other mbed Pin Names + LED1 = P1_8, + LED2 = P1_9, + LED3 = P1_10, + LED4 = P1_11, + + USBTX = P0_19, + USBRX = P0_18, + + // Not connected + NC = (int)0xFFFFFFFF, +} PinName; + +typedef enum { + CHANNEL0 = FLEX_INT0_IRQn, + CHANNEL1 = FLEX_INT1_IRQn, + CHANNEL2 = FLEX_INT2_IRQn, + CHANNEL3 = FLEX_INT3_IRQn, + CHANNEL4 = FLEX_INT4_IRQn, + CHANNEL5 = FLEX_INT5_IRQn, + CHANNEL6 = FLEX_INT6_IRQn, + CHANNEL7 = FLEX_INT7_IRQn +} Channel; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/device.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/device.h new file mode 100644 index 0000000000..ab3d323804 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U24_301/device.h @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 1 +#define DEVICE_LOCALFILESYSTEM 1 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif |