1 files changed, 130 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/PinNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/PinNames.h
new file mode 100644
index 0000000000..3db5f772a8
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/PinNames.h
@@ -0,0 +1,130 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  3
+
+typedef enum {
+    NC = (int)0xFFFFFFFF,
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = NC,
+    p9  = NC,
+    p10 = NC,
+    p11 = NC,
+    p12 = NC,
+    p13 = 13,
+    p14 = NC,
+    p15 = NC,
+    p16 = 16,
+    p17 = 17,
+    p18 = NC,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = NC,
+    p29 = 29,
+    p30 = 30,
+    p31 = 31,
+
+    LED1    = p7,
+    LED2    = p13,
+
+    BUTTON0 = p16,
+    BUTTON1 = p17,
+
+    RX_PIN_NUMBER  = p23,
+    TX_PIN_NUMBER  = p25,
+
+    // mBed interface Pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER,
+
+    SPI_PSELMOSI0 = p24,
+    SPI_PSELMISO0 = p29,
+    SPI_PSELSS0   = p6,
+    SPI_PSELSCK0  = p21,
+
+    SPIS_PSELMOSI = p24,
+    SPIS_PSELMISO = p29,
+    SPIS_PSELSS   = p6,
+    SPIS_PSELSCK  = p21,
+
+    I2C_SDA0 = p22,
+    I2C_SCL0 = p20,
+
+    A0  = p0,
+    A1  = p1,
+    A2  = p2,
+    A3  = p3,
+    A4  = p4,
+    A5  = p5,
+
+    SWIO = p19,
+    VERF0 = p0,
+
+    // SPI for controlling internal flash, don't use it.
+    FLASH_SPIMOSI = 15,
+    FLASH_SPIMISO = 9,
+    FLASH_SPICS   = 28,
+    FLASH_SPICLK  = 11,
+    // Not connected
+    CTS_PIN_NUMBER= NC,
+    RTS_PIN_NUMBER= NC,
+    SPI_PSELMOSI1 = NC,
+    SPI_PSELMISO1 = NC,
+    SPI_PSELSS1   = NC,
+    SPI_PSELSCK1  = NC,
+    LED3          = NC,
+    LED4          = NC
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif