diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_smc.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_smc.h | 566 |
1 files changed, 566 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_smc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_smc.h new file mode 100644 index 0000000000..05ca69643c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_smc.h @@ -0,0 +1,566 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K64P144M120SF5RM, Rev.2, January 2014 +** Version: rev. 2.5, 2014-02-10 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-08-12) +** Initial version. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** MCG - registers updated. +** PORTA, PORTB, PORTC, PORTE - registers for digital filter removed. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-09) +** DMA - EARS register removed. +** AIPS0, AIPS1 - MPRA register updated. +** - rev. 2.3 (2014-01-24) +** Update according to reference manual rev. 2 +** ENET, MCG, MCM, SIM, USB - registers updated +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK64F12.h +** Update of SystemInit() and SystemCoreClockUpdate() functions. +** - rev. 2.5 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK64F12.h +** Update of SystemInit() and SystemCoreClockUpdate() functions. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_SMC_REGISTERS_H__ +#define __HW_SMC_REGISTERS_H__ + +#include "MK64F12.h" +#include "fsl_bitaccess.h" + +/* + * MK64F12 SMC + * + * System Mode Controller + * + * Registers defined in this header file: + * - HW_SMC_PMPROT - Power Mode Protection register + * - HW_SMC_PMCTRL - Power Mode Control register + * - HW_SMC_VLLSCTRL - VLLS Control register + * - HW_SMC_PMSTAT - Power Mode Status register + * + * - hw_smc_t - Struct containing all module registers. + */ + +#define HW_SMC_INSTANCE_COUNT (1U) /*!< Number of instances of the SMC module. */ + +/******************************************************************************* + * HW_SMC_PMPROT - Power Mode Protection register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMPROT - Power Mode Protection register (RW) + * + * Reset value: 0x00U + * + * This register provides protection for entry into any low-power run or stop + * mode. The enabling of the low-power run or stop mode occurs by configuring the + * Power Mode Control register (PMCTRL). The PMPROT register can be written only + * once after any system reset. If the MCU is configured for a disallowed or + * reserved power mode, the MCU remains in its current power mode. For example, if the + * MCU is in normal RUN mode and AVLP is 0, an attempt to enter VLPR mode using + * PMCTRL[RUNM] is blocked and PMCTRL[RUNM] remains 00b, indicating the MCU is + * still in Normal Run mode. This register is reset on Chip Reset not VLLS and by + * reset types that trigger Chip Reset not VLLS. It is unaffected by reset types + * that do not trigger Chip Reset not VLLS. See the Reset section details for more + * information. + */ +typedef union _hw_smc_pmprot +{ + uint8_t U; + struct _hw_smc_pmprot_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t AVLLS : 1; /*!< [1] Allow Very-Low-Leakage Stop Mode */ + uint8_t RESERVED1 : 1; /*!< [2] */ + uint8_t ALLS : 1; /*!< [3] Allow Low-Leakage Stop Mode */ + uint8_t RESERVED2 : 1; /*!< [4] */ + uint8_t AVLP : 1; /*!< [5] Allow Very-Low-Power Modes */ + uint8_t RESERVED3 : 2; /*!< [7:6] */ + } B; +} hw_smc_pmprot_t; + +/*! + * @name Constants and macros for entire SMC_PMPROT register + */ +/*@{*/ +#define HW_SMC_PMPROT_ADDR(x) ((x) + 0x0U) + +#define HW_SMC_PMPROT(x) (*(__IO hw_smc_pmprot_t *) HW_SMC_PMPROT_ADDR(x)) +#define HW_SMC_PMPROT_RD(x) (HW_SMC_PMPROT(x).U) +#define HW_SMC_PMPROT_WR(x, v) (HW_SMC_PMPROT(x).U = (v)) +#define HW_SMC_PMPROT_SET(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) | (v))) +#define HW_SMC_PMPROT_CLR(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) & ~(v))) +#define HW_SMC_PMPROT_TOG(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMPROT bitfields + */ + +/*! + * @name Register SMC_PMPROT, field AVLLS[1] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write once + * bit allows the MCU to enter any very-low-leakage stop mode (VLLSx). + * + * Values: + * - 0 - Any VLLSx mode is not allowed + * - 1 - Any VLLSx mode is allowed + */ +/*@{*/ +#define BP_SMC_PMPROT_AVLLS (1U) /*!< Bit position for SMC_PMPROT_AVLLS. */ +#define BM_SMC_PMPROT_AVLLS (0x02U) /*!< Bit mask for SMC_PMPROT_AVLLS. */ +#define BS_SMC_PMPROT_AVLLS (1U) /*!< Bit field size in bits for SMC_PMPROT_AVLLS. */ + +/*! @brief Read current value of the SMC_PMPROT_AVLLS field. */ +#define BR_SMC_PMPROT_AVLLS(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLLS)) + +/*! @brief Format value for bitfield SMC_PMPROT_AVLLS. */ +#define BF_SMC_PMPROT_AVLLS(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_AVLLS) & BM_SMC_PMPROT_AVLLS) + +/*! @brief Set the AVLLS field to a new value. */ +#define BW_SMC_PMPROT_AVLLS(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLLS) = (v)) +/*@}*/ + +/*! + * @name Register SMC_PMPROT, field ALLS[3] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write-once + * field allows the MCU to enter any low-leakage stop mode (LLS). + * + * Values: + * - 0 - LLS is not allowed + * - 1 - LLS is allowed + */ +/*@{*/ +#define BP_SMC_PMPROT_ALLS (3U) /*!< Bit position for SMC_PMPROT_ALLS. */ +#define BM_SMC_PMPROT_ALLS (0x08U) /*!< Bit mask for SMC_PMPROT_ALLS. */ +#define BS_SMC_PMPROT_ALLS (1U) /*!< Bit field size in bits for SMC_PMPROT_ALLS. */ + +/*! @brief Read current value of the SMC_PMPROT_ALLS field. */ +#define BR_SMC_PMPROT_ALLS(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_ALLS)) + +/*! @brief Format value for bitfield SMC_PMPROT_ALLS. */ +#define BF_SMC_PMPROT_ALLS(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_ALLS) & BM_SMC_PMPROT_ALLS) + +/*! @brief Set the ALLS field to a new value. */ +#define BW_SMC_PMPROT_ALLS(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_ALLS) = (v)) +/*@}*/ + +/*! + * @name Register SMC_PMPROT, field AVLP[5] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write-once + * field allows the MCU to enter any very-low-power mode (VLPR, VLPW, and VLPS). + * + * Values: + * - 0 - VLPR, VLPW, and VLPS are not allowed. + * - 1 - VLPR, VLPW, and VLPS are allowed. + */ +/*@{*/ +#define BP_SMC_PMPROT_AVLP (5U) /*!< Bit position for SMC_PMPROT_AVLP. */ +#define BM_SMC_PMPROT_AVLP (0x20U) /*!< Bit mask for SMC_PMPROT_AVLP. */ +#define BS_SMC_PMPROT_AVLP (1U) /*!< Bit field size in bits for SMC_PMPROT_AVLP. */ + +/*! @brief Read current value of the SMC_PMPROT_AVLP field. */ +#define BR_SMC_PMPROT_AVLP(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLP)) + +/*! @brief Format value for bitfield SMC_PMPROT_AVLP. */ +#define BF_SMC_PMPROT_AVLP(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_AVLP) & BM_SMC_PMPROT_AVLP) + +/*! @brief Set the AVLP field to a new value. */ +#define BW_SMC_PMPROT_AVLP(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SMC_PMCTRL - Power Mode Control register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMCTRL - Power Mode Control register (RW) + * + * Reset value: 0x00U + * + * The PMCTRL register controls entry into low-power Run and Stop modes, + * provided that the selected power mode is allowed via an appropriate setting of the + * protection (PMPROT) register. This register is reset on Chip POR not VLLS and by + * reset types that trigger Chip POR not VLLS. It is unaffected by reset types + * that do not trigger Chip POR not VLLS. See the Reset section details for more + * information. + */ +typedef union _hw_smc_pmctrl +{ + uint8_t U; + struct _hw_smc_pmctrl_bitfields + { + uint8_t STOPM : 3; /*!< [2:0] Stop Mode Control */ + uint8_t STOPA : 1; /*!< [3] Stop Aborted */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t RUNM : 2; /*!< [6:5] Run Mode Control */ + uint8_t LPWUI : 1; /*!< [7] Low-Power Wake Up On Interrupt */ + } B; +} hw_smc_pmctrl_t; + +/*! + * @name Constants and macros for entire SMC_PMCTRL register + */ +/*@{*/ +#define HW_SMC_PMCTRL_ADDR(x) ((x) + 0x1U) + +#define HW_SMC_PMCTRL(x) (*(__IO hw_smc_pmctrl_t *) HW_SMC_PMCTRL_ADDR(x)) +#define HW_SMC_PMCTRL_RD(x) (HW_SMC_PMCTRL(x).U) +#define HW_SMC_PMCTRL_WR(x, v) (HW_SMC_PMCTRL(x).U = (v)) +#define HW_SMC_PMCTRL_SET(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) | (v))) +#define HW_SMC_PMCTRL_CLR(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) & ~(v))) +#define HW_SMC_PMCTRL_TOG(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMCTRL bitfields + */ + +/*! + * @name Register SMC_PMCTRL, field STOPM[2:0] (RW) + * + * When written, controls entry into the selected stop mode when Sleep-Now or + * Sleep-On-Exit mode is entered with SLEEPDEEP=1 . Writes to this field are + * blocked if the protection level has not been enabled using the PMPROT register. + * After any system reset, this field is cleared by hardware on any successful write + * to the PMPROT register. When set to VLLSx, the VLLSM field in the VLLSCTRL + * register is used to further select the particular VLLS submode which will be + * entered. + * + * Values: + * - 000 - Normal Stop (STOP) + * - 001 - Reserved + * - 010 - Very-Low-Power Stop (VLPS) + * - 011 - Low-Leakage Stop (LLS) + * - 100 - Very-Low-Leakage Stop (VLLSx) + * - 101 - Reserved + * - 110 - Reseved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SMC_PMCTRL_STOPM (0U) /*!< Bit position for SMC_PMCTRL_STOPM. */ +#define BM_SMC_PMCTRL_STOPM (0x07U) /*!< Bit mask for SMC_PMCTRL_STOPM. */ +#define BS_SMC_PMCTRL_STOPM (3U) /*!< Bit field size in bits for SMC_PMCTRL_STOPM. */ + +/*! @brief Read current value of the SMC_PMCTRL_STOPM field. */ +#define BR_SMC_PMCTRL_STOPM(x) (HW_SMC_PMCTRL(x).B.STOPM) + +/*! @brief Format value for bitfield SMC_PMCTRL_STOPM. */ +#define BF_SMC_PMCTRL_STOPM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMCTRL_STOPM) & BM_SMC_PMCTRL_STOPM) + +/*! @brief Set the STOPM field to a new value. */ +#define BW_SMC_PMCTRL_STOPM(x, v) (HW_SMC_PMCTRL_WR(x, (HW_SMC_PMCTRL_RD(x) & ~BM_SMC_PMCTRL_STOPM) | BF_SMC_PMCTRL_STOPM(v))) +/*@}*/ + +/*! + * @name Register SMC_PMCTRL, field STOPA[3] (RO) + * + * When set, this read-only status bit indicates an interrupt or reset occured + * during the previous stop mode entry sequence, preventing the system from + * entering that mode. This field is cleared by hardware at the beginning of any stop + * mode entry sequence and is set if the sequence was aborted. + * + * Values: + * - 0 - The previous stop mode entry was successsful. + * - 1 - The previous stop mode entry was aborted. + */ +/*@{*/ +#define BP_SMC_PMCTRL_STOPA (3U) /*!< Bit position for SMC_PMCTRL_STOPA. */ +#define BM_SMC_PMCTRL_STOPA (0x08U) /*!< Bit mask for SMC_PMCTRL_STOPA. */ +#define BS_SMC_PMCTRL_STOPA (1U) /*!< Bit field size in bits for SMC_PMCTRL_STOPA. */ + +/*! @brief Read current value of the SMC_PMCTRL_STOPA field. */ +#define BR_SMC_PMCTRL_STOPA(x) (BITBAND_ACCESS8(HW_SMC_PMCTRL_ADDR(x), BP_SMC_PMCTRL_STOPA)) +/*@}*/ + +/*! + * @name Register SMC_PMCTRL, field RUNM[6:5] (RW) + * + * When written, causes entry into the selected run mode. Writes to this field + * are blocked if the protection level has not been enabled using the PMPROT + * register. RUNM may be set to VLPR only when PMSTAT=RUN. After being written to + * VLPR, RUNM should not be written back to RUN until PMSTAT=VLPR. + * + * Values: + * - 00 - Normal Run mode (RUN) + * - 01 - Reserved + * - 10 - Very-Low-Power Run mode (VLPR) + * - 11 - Reserved + */ +/*@{*/ +#define BP_SMC_PMCTRL_RUNM (5U) /*!< Bit position for SMC_PMCTRL_RUNM. */ +#define BM_SMC_PMCTRL_RUNM (0x60U) /*!< Bit mask for SMC_PMCTRL_RUNM. */ +#define BS_SMC_PMCTRL_RUNM (2U) /*!< Bit field size in bits for SMC_PMCTRL_RUNM. */ + +/*! @brief Read current value of the SMC_PMCTRL_RUNM field. */ +#define BR_SMC_PMCTRL_RUNM(x) (HW_SMC_PMCTRL(x).B.RUNM) + +/*! @brief Format value for bitfield SMC_PMCTRL_RUNM. */ +#define BF_SMC_PMCTRL_RUNM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMCTRL_RUNM) & BM_SMC_PMCTRL_RUNM) + +/*! @brief Set the RUNM field to a new value. */ +#define BW_SMC_PMCTRL_RUNM(x, v) (HW_SMC_PMCTRL_WR(x, (HW_SMC_PMCTRL_RD(x) & ~BM_SMC_PMCTRL_RUNM) | BF_SMC_PMCTRL_RUNM(v))) +/*@}*/ + +/*! + * @name Register SMC_PMCTRL, field LPWUI[7] (RW) + * + * Causes the SMC to exit to normal RUN mode when any active MCU interrupt + * occurs while in a VLP mode (VLPR, VLPW or VLPS). If VLPS mode was entered directly + * from RUN mode, the SMC will always exit back to normal RUN mode regardless of + * the LPWUI setting. LPWUI must be modified only while the system is in RUN + * mode, that is, when PMSTAT=RUN. + * + * Values: + * - 0 - The system remains in a VLP mode on an interrupt + * - 1 - The system exits to Normal RUN mode on an interrupt + */ +/*@{*/ +#define BP_SMC_PMCTRL_LPWUI (7U) /*!< Bit position for SMC_PMCTRL_LPWUI. */ +#define BM_SMC_PMCTRL_LPWUI (0x80U) /*!< Bit mask for SMC_PMCTRL_LPWUI. */ +#define BS_SMC_PMCTRL_LPWUI (1U) /*!< Bit field size in bits for SMC_PMCTRL_LPWUI. */ + +/*! @brief Read current value of the SMC_PMCTRL_LPWUI field. */ +#define BR_SMC_PMCTRL_LPWUI(x) (BITBAND_ACCESS8(HW_SMC_PMCTRL_ADDR(x), BP_SMC_PMCTRL_LPWUI)) + +/*! @brief Format value for bitfield SMC_PMCTRL_LPWUI. */ +#define BF_SMC_PMCTRL_LPWUI(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMCTRL_LPWUI) & BM_SMC_PMCTRL_LPWUI) + +/*! @brief Set the LPWUI field to a new value. */ +#define BW_SMC_PMCTRL_LPWUI(x, v) (BITBAND_ACCESS8(HW_SMC_PMCTRL_ADDR(x), BP_SMC_PMCTRL_LPWUI) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SMC_VLLSCTRL - VLLS Control register + ******************************************************************************/ + +/*! + * @brief HW_SMC_VLLSCTRL - VLLS Control register (RW) + * + * Reset value: 0x03U + * + * The VLLSCTRL register controls features related to VLLS modes. This register + * is reset on Chip POR not VLLS and by reset types that trigger Chip POR not + * VLLS. It is unaffected by reset types that do not trigger Chip POR not VLLS. See + * the Reset section details for more information. + */ +typedef union _hw_smc_vllsctrl +{ + uint8_t U; + struct _hw_smc_vllsctrl_bitfields + { + uint8_t VLLSM : 3; /*!< [2:0] VLLS Mode Control */ + uint8_t RESERVED0 : 2; /*!< [4:3] */ + uint8_t PORPO : 1; /*!< [5] POR Power Option */ + uint8_t RESERVED1 : 2; /*!< [7:6] */ + } B; +} hw_smc_vllsctrl_t; + +/*! + * @name Constants and macros for entire SMC_VLLSCTRL register + */ +/*@{*/ +#define HW_SMC_VLLSCTRL_ADDR(x) ((x) + 0x2U) + +#define HW_SMC_VLLSCTRL(x) (*(__IO hw_smc_vllsctrl_t *) HW_SMC_VLLSCTRL_ADDR(x)) +#define HW_SMC_VLLSCTRL_RD(x) (HW_SMC_VLLSCTRL(x).U) +#define HW_SMC_VLLSCTRL_WR(x, v) (HW_SMC_VLLSCTRL(x).U = (v)) +#define HW_SMC_VLLSCTRL_SET(x, v) (HW_SMC_VLLSCTRL_WR(x, HW_SMC_VLLSCTRL_RD(x) | (v))) +#define HW_SMC_VLLSCTRL_CLR(x, v) (HW_SMC_VLLSCTRL_WR(x, HW_SMC_VLLSCTRL_RD(x) & ~(v))) +#define HW_SMC_VLLSCTRL_TOG(x, v) (HW_SMC_VLLSCTRL_WR(x, HW_SMC_VLLSCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_VLLSCTRL bitfields + */ + +/*! + * @name Register SMC_VLLSCTRL, field VLLSM[2:0] (RW) + * + * Controls which VLLS sub-mode to enter if STOPM=VLLS. + * + * Values: + * - 000 - VLLS0 + * - 001 - VLLS1 + * - 010 - VLLS2 + * - 011 - VLLS3 + * - 100 - Reserved + * - 101 - Reserved + * - 110 - Reserved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SMC_VLLSCTRL_VLLSM (0U) /*!< Bit position for SMC_VLLSCTRL_VLLSM. */ +#define BM_SMC_VLLSCTRL_VLLSM (0x07U) /*!< Bit mask for SMC_VLLSCTRL_VLLSM. */ +#define BS_SMC_VLLSCTRL_VLLSM (3U) /*!< Bit field size in bits for SMC_VLLSCTRL_VLLSM. */ + +/*! @brief Read current value of the SMC_VLLSCTRL_VLLSM field. */ +#define BR_SMC_VLLSCTRL_VLLSM(x) (HW_SMC_VLLSCTRL(x).B.VLLSM) + +/*! @brief Format value for bitfield SMC_VLLSCTRL_VLLSM. */ +#define BF_SMC_VLLSCTRL_VLLSM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_VLLSCTRL_VLLSM) & BM_SMC_VLLSCTRL_VLLSM) + +/*! @brief Set the VLLSM field to a new value. */ +#define BW_SMC_VLLSCTRL_VLLSM(x, v) (HW_SMC_VLLSCTRL_WR(x, (HW_SMC_VLLSCTRL_RD(x) & ~BM_SMC_VLLSCTRL_VLLSM) | BF_SMC_VLLSCTRL_VLLSM(v))) +/*@}*/ + +/*! + * @name Register SMC_VLLSCTRL, field PORPO[5] (RW) + * + * Controls whether the POR detect circuit (for brown-out detection) is enabled + * in VLLS0 mode. + * + * Values: + * - 0 - POR detect circuit is enabled in VLLS0. + * - 1 - POR detect circuit is disabled in VLLS0. + */ +/*@{*/ +#define BP_SMC_VLLSCTRL_PORPO (5U) /*!< Bit position for SMC_VLLSCTRL_PORPO. */ +#define BM_SMC_VLLSCTRL_PORPO (0x20U) /*!< Bit mask for SMC_VLLSCTRL_PORPO. */ +#define BS_SMC_VLLSCTRL_PORPO (1U) /*!< Bit field size in bits for SMC_VLLSCTRL_PORPO. */ + +/*! @brief Read current value of the SMC_VLLSCTRL_PORPO field. */ +#define BR_SMC_VLLSCTRL_PORPO(x) (BITBAND_ACCESS8(HW_SMC_VLLSCTRL_ADDR(x), BP_SMC_VLLSCTRL_PORPO)) + +/*! @brief Format value for bitfield SMC_VLLSCTRL_PORPO. */ +#define BF_SMC_VLLSCTRL_PORPO(v) ((uint8_t)((uint8_t)(v) << BP_SMC_VLLSCTRL_PORPO) & BM_SMC_VLLSCTRL_PORPO) + +/*! @brief Set the PORPO field to a new value. */ +#define BW_SMC_VLLSCTRL_PORPO(x, v) (BITBAND_ACCESS8(HW_SMC_VLLSCTRL_ADDR(x), BP_SMC_VLLSCTRL_PORPO) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SMC_PMSTAT - Power Mode Status register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMSTAT - Power Mode Status register (RO) + * + * Reset value: 0x01U + * + * PMSTAT is a read-only, one-hot register which indicates the current power + * mode of the system. This register is reset on Chip POR not VLLS and by reset + * types that trigger Chip POR not VLLS. It is unaffected by reset types that do not + * trigger Chip POR not VLLS. See the Reset section details for more information. + */ +typedef union _hw_smc_pmstat +{ + uint8_t U; + struct _hw_smc_pmstat_bitfields + { + uint8_t PMSTAT : 7; /*!< [6:0] */ + uint8_t RESERVED0 : 1; /*!< [7] */ + } B; +} hw_smc_pmstat_t; + +/*! + * @name Constants and macros for entire SMC_PMSTAT register + */ +/*@{*/ +#define HW_SMC_PMSTAT_ADDR(x) ((x) + 0x3U) + +#define HW_SMC_PMSTAT(x) (*(__I hw_smc_pmstat_t *) HW_SMC_PMSTAT_ADDR(x)) +#define HW_SMC_PMSTAT_RD(x) (HW_SMC_PMSTAT(x).U) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMSTAT bitfields + */ + +/*! + * @name Register SMC_PMSTAT, field PMSTAT[6:0] (RO) + * + * When debug is enabled, the PMSTAT will not update to STOP or VLPS + */ +/*@{*/ +#define BP_SMC_PMSTAT_PMSTAT (0U) /*!< Bit position for SMC_PMSTAT_PMSTAT. */ +#define BM_SMC_PMSTAT_PMSTAT (0x7FU) /*!< Bit mask for SMC_PMSTAT_PMSTAT. */ +#define BS_SMC_PMSTAT_PMSTAT (7U) /*!< Bit field size in bits for SMC_PMSTAT_PMSTAT. */ + +/*! @brief Read current value of the SMC_PMSTAT_PMSTAT field. */ +#define BR_SMC_PMSTAT_PMSTAT(x) (HW_SMC_PMSTAT(x).B.PMSTAT) +/*@}*/ + +/******************************************************************************* + * hw_smc_t - module struct + ******************************************************************************/ +/*! + * @brief All SMC module registers. + */ +#pragma pack(1) +typedef struct _hw_smc +{ + __IO hw_smc_pmprot_t PMPROT; /*!< [0x0] Power Mode Protection register */ + __IO hw_smc_pmctrl_t PMCTRL; /*!< [0x1] Power Mode Control register */ + __IO hw_smc_vllsctrl_t VLLSCTRL; /*!< [0x2] VLLS Control register */ + __I hw_smc_pmstat_t PMSTAT; /*!< [0x3] Power Mode Status register */ +} hw_smc_t; +#pragma pack() + +/*! @brief Macro to access all SMC registers. */ +/*! @param x SMC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_SMC(SMC_BASE)</code>. */ +#define HW_SMC(x) (*(hw_smc_t *)(x)) + +#endif /* __HW_SMC_REGISTERS_H__ */ +/* EOF */ |