diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212')
40 files changed, 86891 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212.h new file mode 100644 index 0000000000..fd48b0f8c2 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212.h @@ -0,0 +1,10137 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** GNU C Compiler - CodeSourcery Sourcery G++ +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** CMSIS Peripheral Access Layer for MK22F51212 +** +** Copyright (c) 1997 - 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/*! + * @file MK22F51212.h + * @version 2.5 + * @date 2014-05-06 + * @brief CMSIS Peripheral Access Layer for MK22F51212 + * + * CMSIS Peripheral Access Layer for MK22F51212 + */ + + +/* ---------------------------------------------------------------------------- + -- MCU activation + ---------------------------------------------------------------------------- */ + +/* Prevention from multiple including the same memory map */ +#if !defined(MK22F51212_H_) /* Check if memory map has not been already included */ +#define MK22F51212_H_ +#define MCU_MK22F51212 + +/* Check if another memory map has not been also included */ +#if (defined(MCU_ACTIVE)) + #error MK22F51212 memory map: There is already included another memory map. Only one memory map can be included. +#endif /* (defined(MCU_ACTIVE)) */ +#define MCU_ACTIVE + +#include <stdint.h> + +/** Memory map major version (memory maps with equal major version number are + * compatible) */ +#define MCU_MEM_MAP_VERSION 0x0200u +/** Memory map minor version */ +#define MCU_MEM_MAP_VERSION_MINOR 0x0005u + +/** + * @brief Macro to calculate address of an aliased word in the peripheral + * bitband area for a peripheral register and bit (bit band region 0x40000000 to + * 0x400FFFFF). + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Address of the aliased word in the peripheral bitband area. + */ +#define BITBAND_REGADDR(Reg,Bit) (0x42000000u + (32u*((uint32_t)&(Reg) - (uint32_t)0x40000000u)) + (4u*((uint32_t)(Bit)))) +/** + * @brief Macro to access a single bit of a peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. Can + * be used for peripherals with 32bit access allowed. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_REG32(Reg,Bit) (*((uint32_t volatile*)(BITBAND_REGADDR(Reg,Bit)))) +#define BITBAND_REG(Reg,Bit) (BITBAND_REG32(Reg,Bit)) +/** + * @brief Macro to access a single bit of a peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. Can + * be used for peripherals with 16bit access allowed. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_REG16(Reg,Bit) (*((uint16_t volatile*)(BITBAND_REGADDR(Reg,Bit)))) +/** + * @brief Macro to access a single bit of a peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. Can + * be used for peripherals with 8bit access allowed. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_REG8(Reg,Bit) (*((uint8_t volatile*)(BITBAND_REGADDR(Reg,Bit)))) + +/* ---------------------------------------------------------------------------- + -- Interrupt vector numbers + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup Interrupt_vector_numbers Interrupt vector numbers + * @{ + */ + +/** Interrupt Number Definitions */ +#define NUMBER_OF_INT_VECTORS 102 /**< Number of interrupts in the Vector table */ + +typedef enum IRQn { + /* Core interrupts */ + NonMaskableInt_IRQn = -14, /**< Non Maskable Interrupt */ + HardFault_IRQn = -13, /**< Cortex-M4 SV Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /**< Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */ + + /* Device specific interrupts */ + DMA0_IRQn = 0, /**< DMA Channel 0 Transfer Complete */ + DMA1_IRQn = 1, /**< DMA Channel 1 Transfer Complete */ + DMA2_IRQn = 2, /**< DMA Channel 2 Transfer Complete */ + DMA3_IRQn = 3, /**< DMA Channel 3 Transfer Complete */ + DMA4_IRQn = 4, /**< DMA Channel 4 Transfer Complete */ + DMA5_IRQn = 5, /**< DMA Channel 5 Transfer Complete */ + DMA6_IRQn = 6, /**< DMA Channel 6 Transfer Complete */ + DMA7_IRQn = 7, /**< DMA Channel 7 Transfer Complete */ + DMA8_IRQn = 8, /**< DMA Channel 8 Transfer Complete */ + DMA9_IRQn = 9, /**< DMA Channel 9 Transfer Complete */ + DMA10_IRQn = 10, /**< DMA Channel 10 Transfer Complete */ + DMA11_IRQn = 11, /**< DMA Channel 11 Transfer Complete */ + DMA12_IRQn = 12, /**< DMA Channel 12 Transfer Complete */ + DMA13_IRQn = 13, /**< DMA Channel 13 Transfer Complete */ + DMA14_IRQn = 14, /**< DMA Channel 14 Transfer Complete */ + DMA15_IRQn = 15, /**< DMA Channel 15 Transfer Complete */ + DMA_Error_IRQn = 16, /**< DMA Error Interrupt */ + MCM_IRQn = 17, /**< Normal Interrupt */ + FTF_IRQn = 18, /**< FTFA Command complete interrupt */ + Read_Collision_IRQn = 19, /**< Read Collision Interrupt */ + LVD_LVW_IRQn = 20, /**< Low Voltage Detect, Low Voltage Warning */ + LLW_IRQn = 21, /**< Low Leakage Wakeup */ + Watchdog_IRQn = 22, /**< WDOG Interrupt */ + RNG_IRQn = 23, /**< RNG Interrupt */ + I2C0_IRQn = 24, /**< I2C0 interrupt */ + I2C1_IRQn = 25, /**< I2C1 interrupt */ + SPI0_IRQn = 26, /**< SPI0 Interrupt */ + SPI1_IRQn = 27, /**< SPI1 Interrupt */ + I2S0_Tx_IRQn = 28, /**< I2S0 transmit interrupt */ + I2S0_Rx_IRQn = 29, /**< I2S0 receive interrupt */ + LPUART0_IRQn = 30, /**< LPUART0 status/error interrupt */ + UART0_RX_TX_IRQn = 31, /**< UART0 Receive/Transmit interrupt */ + UART0_ERR_IRQn = 32, /**< UART0 Error interrupt */ + UART1_RX_TX_IRQn = 33, /**< UART1 Receive/Transmit interrupt */ + UART1_ERR_IRQn = 34, /**< UART1 Error interrupt */ + UART2_RX_TX_IRQn = 35, /**< UART2 Receive/Transmit interrupt */ + UART2_ERR_IRQn = 36, /**< UART2 Error interrupt */ + Reserved53_IRQn = 37, /**< Reserved interrupt 53 */ + Reserved54_IRQn = 38, /**< Reserved interrupt 54 */ + ADC0_IRQn = 39, /**< ADC0 interrupt */ + CMP0_IRQn = 40, /**< CMP0 interrupt */ + CMP1_IRQn = 41, /**< CMP1 interrupt */ + FTM0_IRQn = 42, /**< FTM0 fault, overflow and channels interrupt */ + FTM1_IRQn = 43, /**< FTM1 fault, overflow and channels interrupt */ + FTM2_IRQn = 44, /**< FTM2 fault, overflow and channels interrupt */ + Reserved61_IRQn = 45, /**< Reserved interrupt 61 */ + RTC_IRQn = 46, /**< RTC interrupt */ + RTC_Seconds_IRQn = 47, /**< RTC seconds interrupt */ + PIT0_IRQn = 48, /**< PIT timer channel 0 interrupt */ + PIT1_IRQn = 49, /**< PIT timer channel 1 interrupt */ + PIT2_IRQn = 50, /**< PIT timer channel 2 interrupt */ + PIT3_IRQn = 51, /**< PIT timer channel 3 interrupt */ + PDB0_IRQn = 52, /**< PDB0 Interrupt */ + USB0_IRQn = 53, /**< USB0 interrupt */ + Reserved70_IRQn = 54, /**< Reserved interrupt 70 */ + Reserved71_IRQn = 55, /**< Reserved interrupt 71 */ + DAC0_IRQn = 56, /**< DAC0 interrupt */ + MCG_IRQn = 57, /**< MCG Interrupt */ + LPTimer_IRQn = 58, /**< LPTimer interrupt */ + PORTA_IRQn = 59, /**< Port A interrupt */ + PORTB_IRQn = 60, /**< Port B interrupt */ + PORTC_IRQn = 61, /**< Port C interrupt */ + PORTD_IRQn = 62, /**< Port D interrupt */ + PORTE_IRQn = 63, /**< Port E interrupt */ + SWI_IRQn = 64, /**< Software interrupt */ + Reserved81_IRQn = 65, /**< Reserved interrupt 81 */ + Reserved82_IRQn = 66, /**< Reserved interrupt 82 */ + Reserved83_IRQn = 67, /**< Reserved interrupt 83 */ + Reserved84_IRQn = 68, /**< Reserved interrupt 84 */ + Reserved85_IRQn = 69, /**< Reserved interrupt 85 */ + Reserved86_IRQn = 70, /**< Reserved interrupt 86 */ + FTM3_IRQn = 71, /**< FTM3 fault, overflow and channels interrupt */ + DAC1_IRQn = 72, /**< DAC1 interrupt */ + ADC1_IRQn = 73, /**< ADC1 interrupt */ + Reserved90_IRQn = 74, /**< Reserved Interrupt 90 */ + Reserved91_IRQn = 75, /**< Reserved Interrupt 91 */ + Reserved92_IRQn = 76, /**< Reserved Interrupt 92 */ + Reserved93_IRQn = 77, /**< Reserved Interrupt 93 */ + Reserved94_IRQn = 78, /**< Reserved Interrupt 94 */ + Reserved95_IRQn = 79, /**< Reserved Interrupt 95 */ + Reserved96_IRQn = 80, /**< Reserved Interrupt 96 */ + Reserved97_IRQn = 81, /**< Reserved Interrupt 97 */ + Reserved98_IRQn = 82, /**< Reserved Interrupt 98 */ + Reserved99_IRQn = 83, /**< Reserved Interrupt 99 */ + Reserved100_IRQn = 84, /**< Reserved Interrupt 100 */ + Reserved101_IRQn = 85 /**< Reserved Interrupt 101 */ +} IRQn_Type; + +/*! + * @} + */ /* end of group Interrupt_vector_numbers */ + + +/* ---------------------------------------------------------------------------- + -- Cortex M4 Core Configuration + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup Cortex_Core_Configuration Cortex M4 Core Configuration + * @{ + */ + +#define __MPU_PRESENT 0 /**< Defines if an MPU is present or not */ +#define __NVIC_PRIO_BITS 4 /**< Number of priority bits implemented in the NVIC */ +#define __Vendor_SysTickConfig 0 /**< Vendor specific implementation of SysTickConfig is defined */ +#define __FPU_PRESENT 1 /**< Defines if an FPU is present or not */ + +#include "core_cm4.h" /* Core Peripheral Access Layer */ +#include "system_MK22F51212.h" /* Device specific configuration file */ + +/*! + * @} + */ /* end of group Cortex_Core_Configuration */ + + +/* ---------------------------------------------------------------------------- + -- Device Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup Peripheral_access_layer Device Peripheral Access Layer + * @{ + */ + + +/* +** Start of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma push + #pragma anon_unions +#elif defined(__CWCC__) + #pragma push + #pragma cpp_extensions on +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=extended +#else + #error Not supported compiler type +#endif + +/* ---------------------------------------------------------------------------- + -- ADC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup ADC_Peripheral_Access_Layer ADC Peripheral Access Layer + * @{ + */ + +/** ADC - Register Layout Typedef */ +typedef struct { + __IO uint32_t SC1[2]; /**< ADC Status and Control Registers 1, array offset: 0x0, array step: 0x4 */ + __IO uint32_t CFG1; /**< ADC Configuration Register 1, offset: 0x8 */ + __IO uint32_t CFG2; /**< ADC Configuration Register 2, offset: 0xC */ + __I uint32_t R[2]; /**< ADC Data Result Register, array offset: 0x10, array step: 0x4 */ + __IO uint32_t CV1; /**< Compare Value Registers, offset: 0x18 */ + __IO uint32_t CV2; /**< Compare Value Registers, offset: 0x1C */ + __IO uint32_t SC2; /**< Status and Control Register 2, offset: 0x20 */ + __IO uint32_t SC3; /**< Status and Control Register 3, offset: 0x24 */ + __IO uint32_t OFS; /**< ADC Offset Correction Register, offset: 0x28 */ + __IO uint32_t PG; /**< ADC Plus-Side Gain Register, offset: 0x2C */ + __IO uint32_t MG; /**< ADC Minus-Side Gain Register, offset: 0x30 */ + __IO uint32_t CLPD; /**< ADC Plus-Side General Calibration Value Register, offset: 0x34 */ + __IO uint32_t CLPS; /**< ADC Plus-Side General Calibration Value Register, offset: 0x38 */ + __IO uint32_t CLP4; /**< ADC Plus-Side General Calibration Value Register, offset: 0x3C */ + __IO uint32_t CLP3; /**< ADC Plus-Side General Calibration Value Register, offset: 0x40 */ + __IO uint32_t CLP2; /**< ADC Plus-Side General Calibration Value Register, offset: 0x44 */ + __IO uint32_t CLP1; /**< ADC Plus-Side General Calibration Value Register, offset: 0x48 */ + __IO uint32_t CLP0; /**< ADC Plus-Side General Calibration Value Register, offset: 0x4C */ + uint8_t RESERVED_0[4]; + __IO uint32_t CLMD; /**< ADC Minus-Side General Calibration Value Register, offset: 0x54 */ + __IO uint32_t CLMS; /**< ADC Minus-Side General Calibration Value Register, offset: 0x58 */ + __IO uint32_t CLM4; /**< ADC Minus-Side General Calibration Value Register, offset: 0x5C */ + __IO uint32_t CLM3; /**< ADC Minus-Side General Calibration Value Register, offset: 0x60 */ + __IO uint32_t CLM2; /**< ADC Minus-Side General Calibration Value Register, offset: 0x64 */ + __IO uint32_t CLM1; /**< ADC Minus-Side General Calibration Value Register, offset: 0x68 */ + __IO uint32_t CLM0; /**< ADC Minus-Side General Calibration Value Register, offset: 0x6C */ +} ADC_Type, *ADC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- ADC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup ADC_Register_Accessor_Macros ADC - Register accessor macros + * @{ + */ + + +/* ADC - Register accessors */ +#define ADC_SC1_REG(base,index) ((base)->SC1[index]) +#define ADC_CFG1_REG(base) ((base)->CFG1) +#define ADC_CFG2_REG(base) ((base)->CFG2) +#define ADC_R_REG(base,index) ((base)->R[index]) +#define ADC_CV1_REG(base) ((base)->CV1) +#define ADC_CV2_REG(base) ((base)->CV2) +#define ADC_SC2_REG(base) ((base)->SC2) +#define ADC_SC3_REG(base) ((base)->SC3) +#define ADC_OFS_REG(base) ((base)->OFS) +#define ADC_PG_REG(base) ((base)->PG) +#define ADC_MG_REG(base) ((base)->MG) +#define ADC_CLPD_REG(base) ((base)->CLPD) +#define ADC_CLPS_REG(base) ((base)->CLPS) +#define ADC_CLP4_REG(base) ((base)->CLP4) +#define ADC_CLP3_REG(base) ((base)->CLP3) +#define ADC_CLP2_REG(base) ((base)->CLP2) +#define ADC_CLP1_REG(base) ((base)->CLP1) +#define ADC_CLP0_REG(base) ((base)->CLP0) +#define ADC_CLMD_REG(base) ((base)->CLMD) +#define ADC_CLMS_REG(base) ((base)->CLMS) +#define ADC_CLM4_REG(base) ((base)->CLM4) +#define ADC_CLM3_REG(base) ((base)->CLM3) +#define ADC_CLM2_REG(base) ((base)->CLM2) +#define ADC_CLM1_REG(base) ((base)->CLM1) +#define ADC_CLM0_REG(base) ((base)->CLM0) + +/*! + * @} + */ /* end of group ADC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- ADC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup ADC_Register_Masks ADC Register Masks + * @{ + */ + +/* SC1 Bit Fields */ +#define ADC_SC1_ADCH_MASK 0x1Fu +#define ADC_SC1_ADCH_SHIFT 0 +#define ADC_SC1_ADCH(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC1_ADCH_SHIFT))&ADC_SC1_ADCH_MASK) +#define ADC_SC1_DIFF_MASK 0x20u +#define ADC_SC1_DIFF_SHIFT 5 +#define ADC_SC1_AIEN_MASK 0x40u +#define ADC_SC1_AIEN_SHIFT 6 +#define ADC_SC1_COCO_MASK 0x80u +#define ADC_SC1_COCO_SHIFT 7 +/* CFG1 Bit Fields */ +#define ADC_CFG1_ADICLK_MASK 0x3u +#define ADC_CFG1_ADICLK_SHIFT 0 +#define ADC_CFG1_ADICLK(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_ADICLK_SHIFT))&ADC_CFG1_ADICLK_MASK) +#define ADC_CFG1_MODE_MASK 0xCu +#define ADC_CFG1_MODE_SHIFT 2 +#define ADC_CFG1_MODE(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_MODE_SHIFT))&ADC_CFG1_MODE_MASK) +#define ADC_CFG1_ADLSMP_MASK 0x10u +#define ADC_CFG1_ADLSMP_SHIFT 4 +#define ADC_CFG1_ADIV_MASK 0x60u +#define ADC_CFG1_ADIV_SHIFT 5 +#define ADC_CFG1_ADIV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_ADIV_SHIFT))&ADC_CFG1_ADIV_MASK) +#define ADC_CFG1_ADLPC_MASK 0x80u +#define ADC_CFG1_ADLPC_SHIFT 7 +/* CFG2 Bit Fields */ +#define ADC_CFG2_ADLSTS_MASK 0x3u +#define ADC_CFG2_ADLSTS_SHIFT 0 +#define ADC_CFG2_ADLSTS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG2_ADLSTS_SHIFT))&ADC_CFG2_ADLSTS_MASK) +#define ADC_CFG2_ADHSC_MASK 0x4u +#define ADC_CFG2_ADHSC_SHIFT 2 +#define ADC_CFG2_ADACKEN_MASK 0x8u +#define ADC_CFG2_ADACKEN_SHIFT 3 +#define ADC_CFG2_MUXSEL_MASK 0x10u +#define ADC_CFG2_MUXSEL_SHIFT 4 +/* R Bit Fields */ +#define ADC_R_D_MASK 0xFFFFu +#define ADC_R_D_SHIFT 0 +#define ADC_R_D(x) (((uint32_t)(((uint32_t)(x))<<ADC_R_D_SHIFT))&ADC_R_D_MASK) +/* CV1 Bit Fields */ +#define ADC_CV1_CV_MASK 0xFFFFu +#define ADC_CV1_CV_SHIFT 0 +#define ADC_CV1_CV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CV1_CV_SHIFT))&ADC_CV1_CV_MASK) +/* CV2 Bit Fields */ +#define ADC_CV2_CV_MASK 0xFFFFu +#define ADC_CV2_CV_SHIFT 0 +#define ADC_CV2_CV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CV2_CV_SHIFT))&ADC_CV2_CV_MASK) +/* SC2 Bit Fields */ +#define ADC_SC2_REFSEL_MASK 0x3u +#define ADC_SC2_REFSEL_SHIFT 0 +#define ADC_SC2_REFSEL(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC2_REFSEL_SHIFT))&ADC_SC2_REFSEL_MASK) +#define ADC_SC2_DMAEN_MASK 0x4u +#define ADC_SC2_DMAEN_SHIFT 2 +#define ADC_SC2_ACREN_MASK 0x8u +#define ADC_SC2_ACREN_SHIFT 3 +#define ADC_SC2_ACFGT_MASK 0x10u +#define ADC_SC2_ACFGT_SHIFT 4 +#define ADC_SC2_ACFE_MASK 0x20u +#define ADC_SC2_ACFE_SHIFT 5 +#define ADC_SC2_ADTRG_MASK 0x40u +#define ADC_SC2_ADTRG_SHIFT 6 +#define ADC_SC2_ADACT_MASK 0x80u +#define ADC_SC2_ADACT_SHIFT 7 +/* SC3 Bit Fields */ +#define ADC_SC3_AVGS_MASK 0x3u +#define ADC_SC3_AVGS_SHIFT 0 +#define ADC_SC3_AVGS(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC3_AVGS_SHIFT))&ADC_SC3_AVGS_MASK) +#define ADC_SC3_AVGE_MASK 0x4u +#define ADC_SC3_AVGE_SHIFT 2 +#define ADC_SC3_ADCO_MASK 0x8u +#define ADC_SC3_ADCO_SHIFT 3 +#define ADC_SC3_CALF_MASK 0x40u +#define ADC_SC3_CALF_SHIFT 6 +#define ADC_SC3_CAL_MASK 0x80u +#define ADC_SC3_CAL_SHIFT 7 +/* OFS Bit Fields */ +#define ADC_OFS_OFS_MASK 0xFFFFu +#define ADC_OFS_OFS_SHIFT 0 +#define ADC_OFS_OFS(x) (((uint32_t)(((uint32_t)(x))<<ADC_OFS_OFS_SHIFT))&ADC_OFS_OFS_MASK) +/* PG Bit Fields */ +#define ADC_PG_PG_MASK 0xFFFFu +#define ADC_PG_PG_SHIFT 0 +#define ADC_PG_PG(x) (((uint32_t)(((uint32_t)(x))<<ADC_PG_PG_SHIFT))&ADC_PG_PG_MASK) +/* MG Bit Fields */ +#define ADC_MG_MG_MASK 0xFFFFu +#define ADC_MG_MG_SHIFT 0 +#define ADC_MG_MG(x) (((uint32_t)(((uint32_t)(x))<<ADC_MG_MG_SHIFT))&ADC_MG_MG_MASK) +/* CLPD Bit Fields */ +#define ADC_CLPD_CLPD_MASK 0x3Fu +#define ADC_CLPD_CLPD_SHIFT 0 +#define ADC_CLPD_CLPD(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLPD_CLPD_SHIFT))&ADC_CLPD_CLPD_MASK) +/* CLPS Bit Fields */ +#define ADC_CLPS_CLPS_MASK 0x3Fu +#define ADC_CLPS_CLPS_SHIFT 0 +#define ADC_CLPS_CLPS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLPS_CLPS_SHIFT))&ADC_CLPS_CLPS_MASK) +/* CLP4 Bit Fields */ +#define ADC_CLP4_CLP4_MASK 0x3FFu +#define ADC_CLP4_CLP4_SHIFT 0 +#define ADC_CLP4_CLP4(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP4_CLP4_SHIFT))&ADC_CLP4_CLP4_MASK) +/* CLP3 Bit Fields */ +#define ADC_CLP3_CLP3_MASK 0x1FFu +#define ADC_CLP3_CLP3_SHIFT 0 +#define ADC_CLP3_CLP3(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP3_CLP3_SHIFT))&ADC_CLP3_CLP3_MASK) +/* CLP2 Bit Fields */ +#define ADC_CLP2_CLP2_MASK 0xFFu +#define ADC_CLP2_CLP2_SHIFT 0 +#define ADC_CLP2_CLP2(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP2_CLP2_SHIFT))&ADC_CLP2_CLP2_MASK) +/* CLP1 Bit Fields */ +#define ADC_CLP1_CLP1_MASK 0x7Fu +#define ADC_CLP1_CLP1_SHIFT 0 +#define ADC_CLP1_CLP1(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP1_CLP1_SHIFT))&ADC_CLP1_CLP1_MASK) +/* CLP0 Bit Fields */ +#define ADC_CLP0_CLP0_MASK 0x3Fu +#define ADC_CLP0_CLP0_SHIFT 0 +#define ADC_CLP0_CLP0(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP0_CLP0_SHIFT))&ADC_CLP0_CLP0_MASK) +/* CLMD Bit Fields */ +#define ADC_CLMD_CLMD_MASK 0x3Fu +#define ADC_CLMD_CLMD_SHIFT 0 +#define ADC_CLMD_CLMD(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLMD_CLMD_SHIFT))&ADC_CLMD_CLMD_MASK) +/* CLMS Bit Fields */ +#define ADC_CLMS_CLMS_MASK 0x3Fu +#define ADC_CLMS_CLMS_SHIFT 0 +#define ADC_CLMS_CLMS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLMS_CLMS_SHIFT))&ADC_CLMS_CLMS_MASK) +/* CLM4 Bit Fields */ +#define ADC_CLM4_CLM4_MASK 0x3FFu +#define ADC_CLM4_CLM4_SHIFT 0 +#define ADC_CLM4_CLM4(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM4_CLM4_SHIFT))&ADC_CLM4_CLM4_MASK) +/* CLM3 Bit Fields */ +#define ADC_CLM3_CLM3_MASK 0x1FFu +#define ADC_CLM3_CLM3_SHIFT 0 +#define ADC_CLM3_CLM3(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM3_CLM3_SHIFT))&ADC_CLM3_CLM3_MASK) +/* CLM2 Bit Fields */ +#define ADC_CLM2_CLM2_MASK 0xFFu +#define ADC_CLM2_CLM2_SHIFT 0 +#define ADC_CLM2_CLM2(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM2_CLM2_SHIFT))&ADC_CLM2_CLM2_MASK) +/* CLM1 Bit Fields */ +#define ADC_CLM1_CLM1_MASK 0x7Fu +#define ADC_CLM1_CLM1_SHIFT 0 +#define ADC_CLM1_CLM1(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM1_CLM1_SHIFT))&ADC_CLM1_CLM1_MASK) +/* CLM0 Bit Fields */ +#define ADC_CLM0_CLM0_MASK 0x3Fu +#define ADC_CLM0_CLM0_SHIFT 0 +#define ADC_CLM0_CLM0(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM0_CLM0_SHIFT))&ADC_CLM0_CLM0_MASK) + +/*! + * @} + */ /* end of group ADC_Register_Masks */ + + +/* ADC - Peripheral instance base addresses */ +/** Peripheral ADC0 base address */ +#define ADC0_BASE (0x4003B000u) +/** Peripheral ADC0 base pointer */ +#define ADC0 ((ADC_Type *)ADC0_BASE) +#define ADC0_BASE_PTR (ADC0) +/** Peripheral ADC1 base address */ +#define ADC1_BASE (0x40027000u) +/** Peripheral ADC1 base pointer */ +#define ADC1 ((ADC_Type *)ADC1_BASE) +#define ADC1_BASE_PTR (ADC1) +/** Array initializer of ADC peripheral base addresses */ +#define ADC_BASE_ADDRS { ADC0_BASE, ADC1_BASE } +/** Array initializer of ADC peripheral base pointers */ +#define ADC_BASE_PTRS { ADC0, ADC1 } +/** Interrupt vectors for the ADC peripheral type */ +#define ADC_IRQS { ADC0_IRQn, ADC1_IRQn } + +/* ---------------------------------------------------------------------------- + -- ADC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup ADC_Register_Accessor_Macros ADC - Register accessor macros + * @{ + */ + + +/* ADC - Register instance definitions */ +/* ADC0 */ +#define ADC0_SC1A ADC_SC1_REG(ADC0,0) +#define ADC0_SC1B ADC_SC1_REG(ADC0,1) +#define ADC0_CFG1 ADC_CFG1_REG(ADC0) +#define ADC0_CFG2 ADC_CFG2_REG(ADC0) +#define ADC0_RA ADC_R_REG(ADC0,0) +#define ADC0_RB ADC_R_REG(ADC0,1) +#define ADC0_CV1 ADC_CV1_REG(ADC0) +#define ADC0_CV2 ADC_CV2_REG(ADC0) +#define ADC0_SC2 ADC_SC2_REG(ADC0) +#define ADC0_SC3 ADC_SC3_REG(ADC0) +#define ADC0_OFS ADC_OFS_REG(ADC0) +#define ADC0_PG ADC_PG_REG(ADC0) +#define ADC0_MG ADC_MG_REG(ADC0) +#define ADC0_CLPD ADC_CLPD_REG(ADC0) +#define ADC0_CLPS ADC_CLPS_REG(ADC0) +#define ADC0_CLP4 ADC_CLP4_REG(ADC0) +#define ADC0_CLP3 ADC_CLP3_REG(ADC0) +#define ADC0_CLP2 ADC_CLP2_REG(ADC0) +#define ADC0_CLP1 ADC_CLP1_REG(ADC0) +#define ADC0_CLP0 ADC_CLP0_REG(ADC0) +#define ADC0_CLMD ADC_CLMD_REG(ADC0) +#define ADC0_CLMS ADC_CLMS_REG(ADC0) +#define ADC0_CLM4 ADC_CLM4_REG(ADC0) +#define ADC0_CLM3 ADC_CLM3_REG(ADC0) +#define ADC0_CLM2 ADC_CLM2_REG(ADC0) +#define ADC0_CLM1 ADC_CLM1_REG(ADC0) +#define ADC0_CLM0 ADC_CLM0_REG(ADC0) +/* ADC1 */ +#define ADC1_SC1A ADC_SC1_REG(ADC1,0) +#define ADC1_SC1B ADC_SC1_REG(ADC1,1) +#define ADC1_CFG1 ADC_CFG1_REG(ADC1) +#define ADC1_CFG2 ADC_CFG2_REG(ADC1) +#define ADC1_RA ADC_R_REG(ADC1,0) +#define ADC1_RB ADC_R_REG(ADC1,1) +#define ADC1_CV1 ADC_CV1_REG(ADC1) +#define ADC1_CV2 ADC_CV2_REG(ADC1) +#define ADC1_SC2 ADC_SC2_REG(ADC1) +#define ADC1_SC3 ADC_SC3_REG(ADC1) +#define ADC1_OFS ADC_OFS_REG(ADC1) +#define ADC1_PG ADC_PG_REG(ADC1) +#define ADC1_MG ADC_MG_REG(ADC1) +#define ADC1_CLPD ADC_CLPD_REG(ADC1) +#define ADC1_CLPS ADC_CLPS_REG(ADC1) +#define ADC1_CLP4 ADC_CLP4_REG(ADC1) +#define ADC1_CLP3 ADC_CLP3_REG(ADC1) +#define ADC1_CLP2 ADC_CLP2_REG(ADC1) +#define ADC1_CLP1 ADC_CLP1_REG(ADC1) +#define ADC1_CLP0 ADC_CLP0_REG(ADC1) +#define ADC1_CLMD ADC_CLMD_REG(ADC1) +#define ADC1_CLMS ADC_CLMS_REG(ADC1) +#define ADC1_CLM4 ADC_CLM4_REG(ADC1) +#define ADC1_CLM3 ADC_CLM3_REG(ADC1) +#define ADC1_CLM2 ADC_CLM2_REG(ADC1) +#define ADC1_CLM1 ADC_CLM1_REG(ADC1) +#define ADC1_CLM0 ADC_CLM0_REG(ADC1) + +/* ADC - Register array accessors */ +#define ADC0_SC1(index) ADC_SC1_REG(ADC0,index) +#define ADC1_SC1(index) ADC_SC1_REG(ADC1,index) +#define ADC0_R(index) ADC_R_REG(ADC0,index) +#define ADC1_R(index) ADC_R_REG(ADC1,index) + +/*! + * @} + */ /* end of group ADC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group ADC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- CMP Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CMP_Peripheral_Access_Layer CMP Peripheral Access Layer + * @{ + */ + +/** CMP - Register Layout Typedef */ +typedef struct { + __IO uint8_t CR0; /**< CMP Control Register 0, offset: 0x0 */ + __IO uint8_t CR1; /**< CMP Control Register 1, offset: 0x1 */ + __IO uint8_t FPR; /**< CMP Filter Period Register, offset: 0x2 */ + __IO uint8_t SCR; /**< CMP Status and Control Register, offset: 0x3 */ + __IO uint8_t DACCR; /**< DAC Control Register, offset: 0x4 */ + __IO uint8_t MUXCR; /**< MUX Control Register, offset: 0x5 */ +} CMP_Type, *CMP_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- CMP - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CMP_Register_Accessor_Macros CMP - Register accessor macros + * @{ + */ + + +/* CMP - Register accessors */ +#define CMP_CR0_REG(base) ((base)->CR0) +#define CMP_CR1_REG(base) ((base)->CR1) +#define CMP_FPR_REG(base) ((base)->FPR) +#define CMP_SCR_REG(base) ((base)->SCR) +#define CMP_DACCR_REG(base) ((base)->DACCR) +#define CMP_MUXCR_REG(base) ((base)->MUXCR) + +/*! + * @} + */ /* end of group CMP_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- CMP Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CMP_Register_Masks CMP Register Masks + * @{ + */ + +/* CR0 Bit Fields */ +#define CMP_CR0_HYSTCTR_MASK 0x3u +#define CMP_CR0_HYSTCTR_SHIFT 0 +#define CMP_CR0_HYSTCTR(x) (((uint8_t)(((uint8_t)(x))<<CMP_CR0_HYSTCTR_SHIFT))&CMP_CR0_HYSTCTR_MASK) +#define CMP_CR0_FILTER_CNT_MASK 0x70u +#define CMP_CR0_FILTER_CNT_SHIFT 4 +#define CMP_CR0_FILTER_CNT(x) (((uint8_t)(((uint8_t)(x))<<CMP_CR0_FILTER_CNT_SHIFT))&CMP_CR0_FILTER_CNT_MASK) +/* CR1 Bit Fields */ +#define CMP_CR1_EN_MASK 0x1u +#define CMP_CR1_EN_SHIFT 0 +#define CMP_CR1_OPE_MASK 0x2u +#define CMP_CR1_OPE_SHIFT 1 +#define CMP_CR1_COS_MASK 0x4u +#define CMP_CR1_COS_SHIFT 2 +#define CMP_CR1_INV_MASK 0x8u +#define CMP_CR1_INV_SHIFT 3 +#define CMP_CR1_PMODE_MASK 0x10u +#define CMP_CR1_PMODE_SHIFT 4 +#define CMP_CR1_TRIGM_MASK 0x20u +#define CMP_CR1_TRIGM_SHIFT 5 +#define CMP_CR1_WE_MASK 0x40u +#define CMP_CR1_WE_SHIFT 6 +#define CMP_CR1_SE_MASK 0x80u +#define CMP_CR1_SE_SHIFT 7 +/* FPR Bit Fields */ +#define CMP_FPR_FILT_PER_MASK 0xFFu +#define CMP_FPR_FILT_PER_SHIFT 0 +#define CMP_FPR_FILT_PER(x) (((uint8_t)(((uint8_t)(x))<<CMP_FPR_FILT_PER_SHIFT))&CMP_FPR_FILT_PER_MASK) +/* SCR Bit Fields */ +#define CMP_SCR_COUT_MASK 0x1u +#define CMP_SCR_COUT_SHIFT 0 +#define CMP_SCR_CFF_MASK 0x2u +#define CMP_SCR_CFF_SHIFT 1 +#define CMP_SCR_CFR_MASK 0x4u +#define CMP_SCR_CFR_SHIFT 2 +#define CMP_SCR_IEF_MASK 0x8u +#define CMP_SCR_IEF_SHIFT 3 +#define CMP_SCR_IER_MASK 0x10u +#define CMP_SCR_IER_SHIFT 4 +#define CMP_SCR_DMAEN_MASK 0x40u +#define CMP_SCR_DMAEN_SHIFT 6 +/* DACCR Bit Fields */ +#define CMP_DACCR_VOSEL_MASK 0x3Fu +#define CMP_DACCR_VOSEL_SHIFT 0 +#define CMP_DACCR_VOSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_DACCR_VOSEL_SHIFT))&CMP_DACCR_VOSEL_MASK) +#define CMP_DACCR_VRSEL_MASK 0x40u +#define CMP_DACCR_VRSEL_SHIFT 6 +#define CMP_DACCR_DACEN_MASK 0x80u +#define CMP_DACCR_DACEN_SHIFT 7 +/* MUXCR Bit Fields */ +#define CMP_MUXCR_MSEL_MASK 0x7u +#define CMP_MUXCR_MSEL_SHIFT 0 +#define CMP_MUXCR_MSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_MUXCR_MSEL_SHIFT))&CMP_MUXCR_MSEL_MASK) +#define CMP_MUXCR_PSEL_MASK 0x38u +#define CMP_MUXCR_PSEL_SHIFT 3 +#define CMP_MUXCR_PSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_MUXCR_PSEL_SHIFT))&CMP_MUXCR_PSEL_MASK) + +/*! + * @} + */ /* end of group CMP_Register_Masks */ + + +/* CMP - Peripheral instance base addresses */ +/** Peripheral CMP0 base address */ +#define CMP0_BASE (0x40073000u) +/** Peripheral CMP0 base pointer */ +#define CMP0 ((CMP_Type *)CMP0_BASE) +#define CMP0_BASE_PTR (CMP0) +/** Peripheral CMP1 base address */ +#define CMP1_BASE (0x40073008u) +/** Peripheral CMP1 base pointer */ +#define CMP1 ((CMP_Type *)CMP1_BASE) +#define CMP1_BASE_PTR (CMP1) +/** Array initializer of CMP peripheral base addresses */ +#define CMP_BASE_ADDRS { CMP0_BASE, CMP1_BASE } +/** Array initializer of CMP peripheral base pointers */ +#define CMP_BASE_PTRS { CMP0, CMP1 } +/** Interrupt vectors for the CMP peripheral type */ +#define CMP_IRQS { CMP0_IRQn, CMP1_IRQn } + +/* ---------------------------------------------------------------------------- + -- CMP - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CMP_Register_Accessor_Macros CMP - Register accessor macros + * @{ + */ + + +/* CMP - Register instance definitions */ +/* CMP0 */ +#define CMP0_CR0 CMP_CR0_REG(CMP0) +#define CMP0_CR1 CMP_CR1_REG(CMP0) +#define CMP0_FPR CMP_FPR_REG(CMP0) +#define CMP0_SCR CMP_SCR_REG(CMP0) +#define CMP0_DACCR CMP_DACCR_REG(CMP0) +#define CMP0_MUXCR CMP_MUXCR_REG(CMP0) +/* CMP1 */ +#define CMP1_CR0 CMP_CR0_REG(CMP1) +#define CMP1_CR1 CMP_CR1_REG(CMP1) +#define CMP1_FPR CMP_FPR_REG(CMP1) +#define CMP1_SCR CMP_SCR_REG(CMP1) +#define CMP1_DACCR CMP_DACCR_REG(CMP1) +#define CMP1_MUXCR CMP_MUXCR_REG(CMP1) + +/*! + * @} + */ /* end of group CMP_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group CMP_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- CRC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CRC_Peripheral_Access_Layer CRC Peripheral Access Layer + * @{ + */ + +/** CRC - Register Layout Typedef */ +typedef struct { + union { /* offset: 0x0 */ + struct { /* offset: 0x0 */ + __IO uint16_t DATAL; /**< CRC_DATAL register., offset: 0x0 */ + __IO uint16_t DATAH; /**< CRC_DATAH register., offset: 0x2 */ + } ACCESS16BIT; + __IO uint32_t DATA; /**< CRC Data register, offset: 0x0 */ + struct { /* offset: 0x0 */ + __IO uint8_t DATALL; /**< CRC_DATALL register., offset: 0x0 */ + __IO uint8_t DATALU; /**< CRC_DATALU register., offset: 0x1 */ + __IO uint8_t DATAHL; /**< CRC_DATAHL register., offset: 0x2 */ + __IO uint8_t DATAHU; /**< CRC_DATAHU register., offset: 0x3 */ + } ACCESS8BIT; + }; + union { /* offset: 0x4 */ + struct { /* offset: 0x4 */ + __IO uint16_t GPOLYL; /**< CRC_GPOLYL register., offset: 0x4 */ + __IO uint16_t GPOLYH; /**< CRC_GPOLYH register., offset: 0x6 */ + } GPOLY_ACCESS16BIT; + __IO uint32_t GPOLY; /**< CRC Polynomial register, offset: 0x4 */ + struct { /* offset: 0x4 */ + __IO uint8_t GPOLYLL; /**< CRC_GPOLYLL register., offset: 0x4 */ + __IO uint8_t GPOLYLU; /**< CRC_GPOLYLU register., offset: 0x5 */ + __IO uint8_t GPOLYHL; /**< CRC_GPOLYHL register., offset: 0x6 */ + __IO uint8_t GPOLYHU; /**< CRC_GPOLYHU register., offset: 0x7 */ + } GPOLY_ACCESS8BIT; + }; + union { /* offset: 0x8 */ + __IO uint32_t CTRL; /**< CRC Control register, offset: 0x8 */ + struct { /* offset: 0x8 */ + uint8_t RESERVED_0[3]; + __IO uint8_t CTRLHU; /**< CRC_CTRLHU register., offset: 0xB */ + } CTRL_ACCESS8BIT; + }; +} CRC_Type, *CRC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- CRC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CRC_Register_Accessor_Macros CRC - Register accessor macros + * @{ + */ + + +/* CRC - Register accessors */ +#define CRC_DATAL_REG(base) ((base)->ACCESS16BIT.DATAL) +#define CRC_DATAH_REG(base) ((base)->ACCESS16BIT.DATAH) +#define CRC_DATA_REG(base) ((base)->DATA) +#define CRC_DATALL_REG(base) ((base)->ACCESS8BIT.DATALL) +#define CRC_DATALU_REG(base) ((base)->ACCESS8BIT.DATALU) +#define CRC_DATAHL_REG(base) ((base)->ACCESS8BIT.DATAHL) +#define CRC_DATAHU_REG(base) ((base)->ACCESS8BIT.DATAHU) +#define CRC_GPOLYL_REG(base) ((base)->GPOLY_ACCESS16BIT.GPOLYL) +#define CRC_GPOLYH_REG(base) ((base)->GPOLY_ACCESS16BIT.GPOLYH) +#define CRC_GPOLY_REG(base) ((base)->GPOLY) +#define CRC_GPOLYLL_REG(base) ((base)->GPOLY_ACCESS8BIT.GPOLYLL) +#define CRC_GPOLYLU_REG(base) ((base)->GPOLY_ACCESS8BIT.GPOLYLU) +#define CRC_GPOLYHL_REG(base) ((base)->GPOLY_ACCESS8BIT.GPOLYHL) +#define CRC_GPOLYHU_REG(base) ((base)->GPOLY_ACCESS8BIT.GPOLYHU) +#define CRC_CTRL_REG(base) ((base)->CTRL) +#define CRC_CTRLHU_REG(base) ((base)->CTRL_ACCESS8BIT.CTRLHU) + +/*! + * @} + */ /* end of group CRC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- CRC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CRC_Register_Masks CRC Register Masks + * @{ + */ + +/* DATAL Bit Fields */ +#define CRC_DATAL_DATAL_MASK 0xFFFFu +#define CRC_DATAL_DATAL_SHIFT 0 +#define CRC_DATAL_DATAL(x) (((uint16_t)(((uint16_t)(x))<<CRC_DATAL_DATAL_SHIFT))&CRC_DATAL_DATAL_MASK) +/* DATAH Bit Fields */ +#define CRC_DATAH_DATAH_MASK 0xFFFFu +#define CRC_DATAH_DATAH_SHIFT 0 +#define CRC_DATAH_DATAH(x) (((uint16_t)(((uint16_t)(x))<<CRC_DATAH_DATAH_SHIFT))&CRC_DATAH_DATAH_MASK) +/* DATA Bit Fields */ +#define CRC_DATA_LL_MASK 0xFFu +#define CRC_DATA_LL_SHIFT 0 +#define CRC_DATA_LL(x) (((uint32_t)(((uint32_t)(x))<<CRC_DATA_LL_SHIFT))&CRC_DATA_LL_MASK) +#define CRC_DATA_LU_MASK 0xFF00u +#define CRC_DATA_LU_SHIFT 8 +#define CRC_DATA_LU(x) (((uint32_t)(((uint32_t)(x))<<CRC_DATA_LU_SHIFT))&CRC_DATA_LU_MASK) +#define CRC_DATA_HL_MASK 0xFF0000u +#define CRC_DATA_HL_SHIFT 16 +#define CRC_DATA_HL(x) (((uint32_t)(((uint32_t)(x))<<CRC_DATA_HL_SHIFT))&CRC_DATA_HL_MASK) +#define CRC_DATA_HU_MASK 0xFF000000u +#define CRC_DATA_HU_SHIFT 24 +#define CRC_DATA_HU(x) (((uint32_t)(((uint32_t)(x))<<CRC_DATA_HU_SHIFT))&CRC_DATA_HU_MASK) +/* DATALL Bit Fields */ +#define CRC_DATALL_DATALL_MASK 0xFFu +#define CRC_DATALL_DATALL_SHIFT 0 +#define CRC_DATALL_DATALL(x) (((uint8_t)(((uint8_t)(x))<<CRC_DATALL_DATALL_SHIFT))&CRC_DATALL_DATALL_MASK) +/* DATALU Bit Fields */ +#define CRC_DATALU_DATALU_MASK 0xFFu +#define CRC_DATALU_DATALU_SHIFT 0 +#define CRC_DATALU_DATALU(x) (((uint8_t)(((uint8_t)(x))<<CRC_DATALU_DATALU_SHIFT))&CRC_DATALU_DATALU_MASK) +/* DATAHL Bit Fields */ +#define CRC_DATAHL_DATAHL_MASK 0xFFu +#define CRC_DATAHL_DATAHL_SHIFT 0 +#define CRC_DATAHL_DATAHL(x) (((uint8_t)(((uint8_t)(x))<<CRC_DATAHL_DATAHL_SHIFT))&CRC_DATAHL_DATAHL_MASK) +/* DATAHU Bit Fields */ +#define CRC_DATAHU_DATAHU_MASK 0xFFu +#define CRC_DATAHU_DATAHU_SHIFT 0 +#define CRC_DATAHU_DATAHU(x) (((uint8_t)(((uint8_t)(x))<<CRC_DATAHU_DATAHU_SHIFT))&CRC_DATAHU_DATAHU_MASK) +/* GPOLYL Bit Fields */ +#define CRC_GPOLYL_GPOLYL_MASK 0xFFFFu +#define CRC_GPOLYL_GPOLYL_SHIFT 0 +#define CRC_GPOLYL_GPOLYL(x) (((uint16_t)(((uint16_t)(x))<<CRC_GPOLYL_GPOLYL_SHIFT))&CRC_GPOLYL_GPOLYL_MASK) +/* GPOLYH Bit Fields */ +#define CRC_GPOLYH_GPOLYH_MASK 0xFFFFu +#define CRC_GPOLYH_GPOLYH_SHIFT 0 +#define CRC_GPOLYH_GPOLYH(x) (((uint16_t)(((uint16_t)(x))<<CRC_GPOLYH_GPOLYH_SHIFT))&CRC_GPOLYH_GPOLYH_MASK) +/* GPOLY Bit Fields */ +#define CRC_GPOLY_LOW_MASK 0xFFFFu +#define CRC_GPOLY_LOW_SHIFT 0 +#define CRC_GPOLY_LOW(x) (((uint32_t)(((uint32_t)(x))<<CRC_GPOLY_LOW_SHIFT))&CRC_GPOLY_LOW_MASK) +#define CRC_GPOLY_HIGH_MASK 0xFFFF0000u +#define CRC_GPOLY_HIGH_SHIFT 16 +#define CRC_GPOLY_HIGH(x) (((uint32_t)(((uint32_t)(x))<<CRC_GPOLY_HIGH_SHIFT))&CRC_GPOLY_HIGH_MASK) +/* GPOLYLL Bit Fields */ +#define CRC_GPOLYLL_GPOLYLL_MASK 0xFFu +#define CRC_GPOLYLL_GPOLYLL_SHIFT 0 +#define CRC_GPOLYLL_GPOLYLL(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYLL_GPOLYLL_SHIFT))&CRC_GPOLYLL_GPOLYLL_MASK) +/* GPOLYLU Bit Fields */ +#define CRC_GPOLYLU_GPOLYLU_MASK 0xFFu +#define CRC_GPOLYLU_GPOLYLU_SHIFT 0 +#define CRC_GPOLYLU_GPOLYLU(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYLU_GPOLYLU_SHIFT))&CRC_GPOLYLU_GPOLYLU_MASK) +/* GPOLYHL Bit Fields */ +#define CRC_GPOLYHL_GPOLYHL_MASK 0xFFu +#define CRC_GPOLYHL_GPOLYHL_SHIFT 0 +#define CRC_GPOLYHL_GPOLYHL(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYHL_GPOLYHL_SHIFT))&CRC_GPOLYHL_GPOLYHL_MASK) +/* GPOLYHU Bit Fields */ +#define CRC_GPOLYHU_GPOLYHU_MASK 0xFFu +#define CRC_GPOLYHU_GPOLYHU_SHIFT 0 +#define CRC_GPOLYHU_GPOLYHU(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYHU_GPOLYHU_SHIFT))&CRC_GPOLYHU_GPOLYHU_MASK) +/* CTRL Bit Fields */ +#define CRC_CTRL_TCRC_MASK 0x1000000u +#define CRC_CTRL_TCRC_SHIFT 24 +#define CRC_CTRL_WAS_MASK 0x2000000u +#define CRC_CTRL_WAS_SHIFT 25 +#define CRC_CTRL_FXOR_MASK 0x4000000u +#define CRC_CTRL_FXOR_SHIFT 26 +#define CRC_CTRL_TOTR_MASK 0x30000000u +#define CRC_CTRL_TOTR_SHIFT 28 +#define CRC_CTRL_TOTR(x) (((uint32_t)(((uint32_t)(x))<<CRC_CTRL_TOTR_SHIFT))&CRC_CTRL_TOTR_MASK) +#define CRC_CTRL_TOT_MASK 0xC0000000u +#define CRC_CTRL_TOT_SHIFT 30 +#define CRC_CTRL_TOT(x) (((uint32_t)(((uint32_t)(x))<<CRC_CTRL_TOT_SHIFT))&CRC_CTRL_TOT_MASK) +/* CTRLHU Bit Fields */ +#define CRC_CTRLHU_TCRC_MASK 0x1u +#define CRC_CTRLHU_TCRC_SHIFT 0 +#define CRC_CTRLHU_WAS_MASK 0x2u +#define CRC_CTRLHU_WAS_SHIFT 1 +#define CRC_CTRLHU_FXOR_MASK 0x4u +#define CRC_CTRLHU_FXOR_SHIFT 2 +#define CRC_CTRLHU_TOTR_MASK 0x30u +#define CRC_CTRLHU_TOTR_SHIFT 4 +#define CRC_CTRLHU_TOTR(x) (((uint8_t)(((uint8_t)(x))<<CRC_CTRLHU_TOTR_SHIFT))&CRC_CTRLHU_TOTR_MASK) +#define CRC_CTRLHU_TOT_MASK 0xC0u +#define CRC_CTRLHU_TOT_SHIFT 6 +#define CRC_CTRLHU_TOT(x) (((uint8_t)(((uint8_t)(x))<<CRC_CTRLHU_TOT_SHIFT))&CRC_CTRLHU_TOT_MASK) + +/*! + * @} + */ /* end of group CRC_Register_Masks */ + + +/* CRC - Peripheral instance base addresses */ +/** Peripheral CRC base address */ +#define CRC_BASE (0x40032000u) +/** Peripheral CRC base pointer */ +#define CRC0 ((CRC_Type *)CRC_BASE) +#define CRC_BASE_PTR (CRC0) +/** Array initializer of CRC peripheral base addresses */ +#define CRC_BASE_ADDRS { CRC_BASE } +/** Array initializer of CRC peripheral base pointers */ +#define CRC_BASE_PTRS { CRC0 } + +/* ---------------------------------------------------------------------------- + -- CRC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup CRC_Register_Accessor_Macros CRC - Register accessor macros + * @{ + */ + + +/* CRC - Register instance definitions */ +/* CRC */ +#define CRC_DATA CRC_DATA_REG(CRC0) +#define CRC_DATAL CRC_DATAL_REG(CRC0) +#define CRC_DATALL CRC_DATALL_REG(CRC0) +#define CRC_DATALU CRC_DATALU_REG(CRC0) +#define CRC_DATAH CRC_DATAH_REG(CRC0) +#define CRC_DATAHL CRC_DATAHL_REG(CRC0) +#define CRC_DATAHU CRC_DATAHU_REG(CRC0) +#define CRC_GPOLY CRC_GPOLY_REG(CRC0) +#define CRC_GPOLYL CRC_GPOLYL_REG(CRC0) +#define CRC_GPOLYLL CRC_GPOLYLL_REG(CRC0) +#define CRC_GPOLYLU CRC_GPOLYLU_REG(CRC0) +#define CRC_GPOLYH CRC_GPOLYH_REG(CRC0) +#define CRC_GPOLYHL CRC_GPOLYHL_REG(CRC0) +#define CRC_GPOLYHU CRC_GPOLYHU_REG(CRC0) +#define CRC_CTRL CRC_CTRL_REG(CRC0) +#define CRC_CTRLHU CRC_CTRLHU_REG(CRC0) + +/*! + * @} + */ /* end of group CRC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group CRC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- DAC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DAC_Peripheral_Access_Layer DAC Peripheral Access Layer + * @{ + */ + +/** DAC - Register Layout Typedef */ +typedef struct { + struct { /* offset: 0x0, array step: 0x2 */ + __IO uint8_t DATL; /**< DAC Data Low Register, array offset: 0x0, array step: 0x2 */ + __IO uint8_t DATH; /**< DAC Data High Register, array offset: 0x1, array step: 0x2 */ + } DAT[16]; + __IO uint8_t SR; /**< DAC Status Register, offset: 0x20 */ + __IO uint8_t C0; /**< DAC Control Register, offset: 0x21 */ + __IO uint8_t C1; /**< DAC Control Register 1, offset: 0x22 */ + __IO uint8_t C2; /**< DAC Control Register 2, offset: 0x23 */ +} DAC_Type, *DAC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- DAC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DAC_Register_Accessor_Macros DAC - Register accessor macros + * @{ + */ + + +/* DAC - Register accessors */ +#define DAC_DATL_REG(base,index) ((base)->DAT[index].DATL) +#define DAC_DATH_REG(base,index) ((base)->DAT[index].DATH) +#define DAC_SR_REG(base) ((base)->SR) +#define DAC_C0_REG(base) ((base)->C0) +#define DAC_C1_REG(base) ((base)->C1) +#define DAC_C2_REG(base) ((base)->C2) + +/*! + * @} + */ /* end of group DAC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- DAC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DAC_Register_Masks DAC Register Masks + * @{ + */ + +/* DATL Bit Fields */ +#define DAC_DATL_DATA0_MASK 0xFFu +#define DAC_DATL_DATA0_SHIFT 0 +#define DAC_DATL_DATA0(x) (((uint8_t)(((uint8_t)(x))<<DAC_DATL_DATA0_SHIFT))&DAC_DATL_DATA0_MASK) +/* DATH Bit Fields */ +#define DAC_DATH_DATA1_MASK 0xFu +#define DAC_DATH_DATA1_SHIFT 0 +#define DAC_DATH_DATA1(x) (((uint8_t)(((uint8_t)(x))<<DAC_DATH_DATA1_SHIFT))&DAC_DATH_DATA1_MASK) +/* SR Bit Fields */ +#define DAC_SR_DACBFRPBF_MASK 0x1u +#define DAC_SR_DACBFRPBF_SHIFT 0 +#define DAC_SR_DACBFRPTF_MASK 0x2u +#define DAC_SR_DACBFRPTF_SHIFT 1 +#define DAC_SR_DACBFWMF_MASK 0x4u +#define DAC_SR_DACBFWMF_SHIFT 2 +/* C0 Bit Fields */ +#define DAC_C0_DACBBIEN_MASK 0x1u +#define DAC_C0_DACBBIEN_SHIFT 0 +#define DAC_C0_DACBTIEN_MASK 0x2u +#define DAC_C0_DACBTIEN_SHIFT 1 +#define DAC_C0_DACBWIEN_MASK 0x4u +#define DAC_C0_DACBWIEN_SHIFT 2 +#define DAC_C0_LPEN_MASK 0x8u +#define DAC_C0_LPEN_SHIFT 3 +#define DAC_C0_DACSWTRG_MASK 0x10u +#define DAC_C0_DACSWTRG_SHIFT 4 +#define DAC_C0_DACTRGSEL_MASK 0x20u +#define DAC_C0_DACTRGSEL_SHIFT 5 +#define DAC_C0_DACRFS_MASK 0x40u +#define DAC_C0_DACRFS_SHIFT 6 +#define DAC_C0_DACEN_MASK 0x80u +#define DAC_C0_DACEN_SHIFT 7 +/* C1 Bit Fields */ +#define DAC_C1_DACBFEN_MASK 0x1u +#define DAC_C1_DACBFEN_SHIFT 0 +#define DAC_C1_DACBFMD_MASK 0x6u +#define DAC_C1_DACBFMD_SHIFT 1 +#define DAC_C1_DACBFMD(x) (((uint8_t)(((uint8_t)(x))<<DAC_C1_DACBFMD_SHIFT))&DAC_C1_DACBFMD_MASK) +#define DAC_C1_DACBFWM_MASK 0x18u +#define DAC_C1_DACBFWM_SHIFT 3 +#define DAC_C1_DACBFWM(x) (((uint8_t)(((uint8_t)(x))<<DAC_C1_DACBFWM_SHIFT))&DAC_C1_DACBFWM_MASK) +#define DAC_C1_DMAEN_MASK 0x80u +#define DAC_C1_DMAEN_SHIFT 7 +/* C2 Bit Fields */ +#define DAC_C2_DACBFUP_MASK 0xFu +#define DAC_C2_DACBFUP_SHIFT 0 +#define DAC_C2_DACBFUP(x) (((uint8_t)(((uint8_t)(x))<<DAC_C2_DACBFUP_SHIFT))&DAC_C2_DACBFUP_MASK) +#define DAC_C2_DACBFRP_MASK 0xF0u +#define DAC_C2_DACBFRP_SHIFT 4 +#define DAC_C2_DACBFRP(x) (((uint8_t)(((uint8_t)(x))<<DAC_C2_DACBFRP_SHIFT))&DAC_C2_DACBFRP_MASK) + +/*! + * @} + */ /* end of group DAC_Register_Masks */ + + +/* DAC - Peripheral instance base addresses */ +/** Peripheral DAC0 base address */ +#define DAC0_BASE (0x4003F000u) +/** Peripheral DAC0 base pointer */ +#define DAC0 ((DAC_Type *)DAC0_BASE) +#define DAC0_BASE_PTR (DAC0) +/** Peripheral DAC1 base address */ +#define DAC1_BASE (0x40028000u) +/** Peripheral DAC1 base pointer */ +#define DAC1 ((DAC_Type *)DAC1_BASE) +#define DAC1_BASE_PTR (DAC1) +/** Array initializer of DAC peripheral base addresses */ +#define DAC_BASE_ADDRS { DAC0_BASE, DAC1_BASE } +/** Array initializer of DAC peripheral base pointers */ +#define DAC_BASE_PTRS { DAC0, DAC1 } +/** Interrupt vectors for the DAC peripheral type */ +#define DAC_IRQS { DAC0_IRQn, DAC1_IRQn } + +/* ---------------------------------------------------------------------------- + -- DAC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DAC_Register_Accessor_Macros DAC - Register accessor macros + * @{ + */ + + +/* DAC - Register instance definitions */ +/* DAC0 */ +#define DAC0_DAT0L DAC_DATL_REG(DAC0,0) +#define DAC0_DAT0H DAC_DATH_REG(DAC0,0) +#define DAC0_DAT1L DAC_DATL_REG(DAC0,1) +#define DAC0_DAT1H DAC_DATH_REG(DAC0,1) +#define DAC0_DAT2L DAC_DATL_REG(DAC0,2) +#define DAC0_DAT2H DAC_DATH_REG(DAC0,2) +#define DAC0_DAT3L DAC_DATL_REG(DAC0,3) +#define DAC0_DAT3H DAC_DATH_REG(DAC0,3) +#define DAC0_DAT4L DAC_DATL_REG(DAC0,4) +#define DAC0_DAT4H DAC_DATH_REG(DAC0,4) +#define DAC0_DAT5L DAC_DATL_REG(DAC0,5) +#define DAC0_DAT5H DAC_DATH_REG(DAC0,5) +#define DAC0_DAT6L DAC_DATL_REG(DAC0,6) +#define DAC0_DAT6H DAC_DATH_REG(DAC0,6) +#define DAC0_DAT7L DAC_DATL_REG(DAC0,7) +#define DAC0_DAT7H DAC_DATH_REG(DAC0,7) +#define DAC0_DAT8L DAC_DATL_REG(DAC0,8) +#define DAC0_DAT8H DAC_DATH_REG(DAC0,8) +#define DAC0_DAT9L DAC_DATL_REG(DAC0,9) +#define DAC0_DAT9H DAC_DATH_REG(DAC0,9) +#define DAC0_DAT10L DAC_DATL_REG(DAC0,10) +#define DAC0_DAT10H DAC_DATH_REG(DAC0,10) +#define DAC0_DAT11L DAC_DATL_REG(DAC0,11) +#define DAC0_DAT11H DAC_DATH_REG(DAC0,11) +#define DAC0_DAT12L DAC_DATL_REG(DAC0,12) +#define DAC0_DAT12H DAC_DATH_REG(DAC0,12) +#define DAC0_DAT13L DAC_DATL_REG(DAC0,13) +#define DAC0_DAT13H DAC_DATH_REG(DAC0,13) +#define DAC0_DAT14L DAC_DATL_REG(DAC0,14) +#define DAC0_DAT14H DAC_DATH_REG(DAC0,14) +#define DAC0_DAT15L DAC_DATL_REG(DAC0,15) +#define DAC0_DAT15H DAC_DATH_REG(DAC0,15) +#define DAC0_SR DAC_SR_REG(DAC0) +#define DAC0_C0 DAC_C0_REG(DAC0) +#define DAC0_C1 DAC_C1_REG(DAC0) +#define DAC0_C2 DAC_C2_REG(DAC0) +/* DAC1 */ +#define DAC1_DAT0L DAC_DATL_REG(DAC1,0) +#define DAC1_DAT0H DAC_DATH_REG(DAC1,0) +#define DAC1_DAT1L DAC_DATL_REG(DAC1,1) +#define DAC1_DAT1H DAC_DATH_REG(DAC1,1) +#define DAC1_DAT2L DAC_DATL_REG(DAC1,2) +#define DAC1_DAT2H DAC_DATH_REG(DAC1,2) +#define DAC1_DAT3L DAC_DATL_REG(DAC1,3) +#define DAC1_DAT3H DAC_DATH_REG(DAC1,3) +#define DAC1_DAT4L DAC_DATL_REG(DAC1,4) +#define DAC1_DAT4H DAC_DATH_REG(DAC1,4) +#define DAC1_DAT5L DAC_DATL_REG(DAC1,5) +#define DAC1_DAT5H DAC_DATH_REG(DAC1,5) +#define DAC1_DAT6L DAC_DATL_REG(DAC1,6) +#define DAC1_DAT6H DAC_DATH_REG(DAC1,6) +#define DAC1_DAT7L DAC_DATL_REG(DAC1,7) +#define DAC1_DAT7H DAC_DATH_REG(DAC1,7) +#define DAC1_DAT8L DAC_DATL_REG(DAC1,8) +#define DAC1_DAT8H DAC_DATH_REG(DAC1,8) +#define DAC1_DAT9L DAC_DATL_REG(DAC1,9) +#define DAC1_DAT9H DAC_DATH_REG(DAC1,9) +#define DAC1_DAT10L DAC_DATL_REG(DAC1,10) +#define DAC1_DAT10H DAC_DATH_REG(DAC1,10) +#define DAC1_DAT11L DAC_DATL_REG(DAC1,11) +#define DAC1_DAT11H DAC_DATH_REG(DAC1,11) +#define DAC1_DAT12L DAC_DATL_REG(DAC1,12) +#define DAC1_DAT12H DAC_DATH_REG(DAC1,12) +#define DAC1_DAT13L DAC_DATL_REG(DAC1,13) +#define DAC1_DAT13H DAC_DATH_REG(DAC1,13) +#define DAC1_DAT14L DAC_DATL_REG(DAC1,14) +#define DAC1_DAT14H DAC_DATH_REG(DAC1,14) +#define DAC1_DAT15L DAC_DATL_REG(DAC1,15) +#define DAC1_DAT15H DAC_DATH_REG(DAC1,15) +#define DAC1_SR DAC_SR_REG(DAC1) +#define DAC1_C0 DAC_C0_REG(DAC1) +#define DAC1_C1 DAC_C1_REG(DAC1) +#define DAC1_C2 DAC_C2_REG(DAC1) + +/* DAC - Register array accessors */ +#define DAC0_DATL(index) DAC_DATL_REG(DAC0,index) +#define DAC1_DATL(index) DAC_DATL_REG(DAC1,index) +#define DAC0_DATH(index) DAC_DATH_REG(DAC0,index) +#define DAC1_DATH(index) DAC_DATH_REG(DAC1,index) + +/*! + * @} + */ /* end of group DAC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group DAC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- DMA Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMA_Peripheral_Access_Layer DMA Peripheral Access Layer + * @{ + */ + +/** DMA - Register Layout Typedef */ +typedef struct { + __IO uint32_t CR; /**< Control Register, offset: 0x0 */ + __I uint32_t ES; /**< Error Status Register, offset: 0x4 */ + uint8_t RESERVED_0[4]; + __IO uint32_t ERQ; /**< Enable Request Register, offset: 0xC */ + uint8_t RESERVED_1[4]; + __IO uint32_t EEI; /**< Enable Error Interrupt Register, offset: 0x14 */ + __O uint8_t CEEI; /**< Clear Enable Error Interrupt Register, offset: 0x18 */ + __O uint8_t SEEI; /**< Set Enable Error Interrupt Register, offset: 0x19 */ + __O uint8_t CERQ; /**< Clear Enable Request Register, offset: 0x1A */ + __O uint8_t SERQ; /**< Set Enable Request Register, offset: 0x1B */ + __O uint8_t CDNE; /**< Clear DONE Status Bit Register, offset: 0x1C */ + __O uint8_t SSRT; /**< Set START Bit Register, offset: 0x1D */ + __O uint8_t CERR; /**< Clear Error Register, offset: 0x1E */ + __O uint8_t CINT; /**< Clear Interrupt Request Register, offset: 0x1F */ + uint8_t RESERVED_2[4]; + __IO uint32_t INT; /**< Interrupt Request Register, offset: 0x24 */ + uint8_t RESERVED_3[4]; + __IO uint32_t ERR; /**< Error Register, offset: 0x2C */ + uint8_t RESERVED_4[4]; + __I uint32_t HRS; /**< Hardware Request Status Register, offset: 0x34 */ + uint8_t RESERVED_5[12]; + __IO uint32_t EARS; /**< Enable Asynchronous Request in Stop Register, offset: 0x44 */ + uint8_t RESERVED_6[184]; + __IO uint8_t DCHPRI3; /**< Channel n Priority Register, offset: 0x100 */ + __IO uint8_t DCHPRI2; /**< Channel n Priority Register, offset: 0x101 */ + __IO uint8_t DCHPRI1; /**< Channel n Priority Register, offset: 0x102 */ + __IO uint8_t DCHPRI0; /**< Channel n Priority Register, offset: 0x103 */ + __IO uint8_t DCHPRI7; /**< Channel n Priority Register, offset: 0x104 */ + __IO uint8_t DCHPRI6; /**< Channel n Priority Register, offset: 0x105 */ + __IO uint8_t DCHPRI5; /**< Channel n Priority Register, offset: 0x106 */ + __IO uint8_t DCHPRI4; /**< Channel n Priority Register, offset: 0x107 */ + __IO uint8_t DCHPRI11; /**< Channel n Priority Register, offset: 0x108 */ + __IO uint8_t DCHPRI10; /**< Channel n Priority Register, offset: 0x109 */ + __IO uint8_t DCHPRI9; /**< Channel n Priority Register, offset: 0x10A */ + __IO uint8_t DCHPRI8; /**< Channel n Priority Register, offset: 0x10B */ + __IO uint8_t DCHPRI15; /**< Channel n Priority Register, offset: 0x10C */ + __IO uint8_t DCHPRI14; /**< Channel n Priority Register, offset: 0x10D */ + __IO uint8_t DCHPRI13; /**< Channel n Priority Register, offset: 0x10E */ + __IO uint8_t DCHPRI12; /**< Channel n Priority Register, offset: 0x10F */ + uint8_t RESERVED_7[3824]; + struct { /* offset: 0x1000, array step: 0x20 */ + __IO uint32_t SADDR; /**< TCD Source Address, array offset: 0x1000, array step: 0x20 */ + __IO uint16_t SOFF; /**< TCD Signed Source Address Offset, array offset: 0x1004, array step: 0x20 */ + __IO uint16_t ATTR; /**< TCD Transfer Attributes, array offset: 0x1006, array step: 0x20 */ + union { /* offset: 0x1008, array step: 0x20 */ + __IO uint32_t NBYTES_MLNO; /**< TCD Minor Byte Count (Minor Loop Disabled), array offset: 0x1008, array step: 0x20 */ + __IO uint32_t NBYTES_MLOFFNO; /**< TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled), array offset: 0x1008, array step: 0x20 */ + __IO uint32_t NBYTES_MLOFFYES; /**< TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled), array offset: 0x1008, array step: 0x20 */ + }; + __IO uint32_t SLAST; /**< TCD Last Source Address Adjustment, array offset: 0x100C, array step: 0x20 */ + __IO uint32_t DADDR; /**< TCD Destination Address, array offset: 0x1010, array step: 0x20 */ + __IO uint16_t DOFF; /**< TCD Signed Destination Address Offset, array offset: 0x1014, array step: 0x20 */ + union { /* offset: 0x1016, array step: 0x20 */ + __IO uint16_t CITER_ELINKNO; /**< TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled), array offset: 0x1016, array step: 0x20 */ + __IO uint16_t CITER_ELINKYES; /**< TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled), array offset: 0x1016, array step: 0x20 */ + }; + __IO uint32_t DLAST_SGA; /**< TCD Last Destination Address Adjustment/Scatter Gather Address, array offset: 0x1018, array step: 0x20 */ + __IO uint16_t CSR; /**< TCD Control and Status, array offset: 0x101C, array step: 0x20 */ + union { /* offset: 0x101E, array step: 0x20 */ + __IO uint16_t BITER_ELINKNO; /**< TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled), array offset: 0x101E, array step: 0x20 */ + __IO uint16_t BITER_ELINKYES; /**< TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled), array offset: 0x101E, array step: 0x20 */ + }; + } TCD[16]; +} DMA_Type, *DMA_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- DMA - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMA_Register_Accessor_Macros DMA - Register accessor macros + * @{ + */ + + +/* DMA - Register accessors */ +#define DMA_CR_REG(base) ((base)->CR) +#define DMA_ES_REG(base) ((base)->ES) +#define DMA_ERQ_REG(base) ((base)->ERQ) +#define DMA_EEI_REG(base) ((base)->EEI) +#define DMA_CEEI_REG(base) ((base)->CEEI) +#define DMA_SEEI_REG(base) ((base)->SEEI) +#define DMA_CERQ_REG(base) ((base)->CERQ) +#define DMA_SERQ_REG(base) ((base)->SERQ) +#define DMA_CDNE_REG(base) ((base)->CDNE) +#define DMA_SSRT_REG(base) ((base)->SSRT) +#define DMA_CERR_REG(base) ((base)->CERR) +#define DMA_CINT_REG(base) ((base)->CINT) +#define DMA_INT_REG(base) ((base)->INT) +#define DMA_ERR_REG(base) ((base)->ERR) +#define DMA_HRS_REG(base) ((base)->HRS) +#define DMA_EARS_REG(base) ((base)->EARS) +#define DMA_DCHPRI3_REG(base) ((base)->DCHPRI3) +#define DMA_DCHPRI2_REG(base) ((base)->DCHPRI2) +#define DMA_DCHPRI1_REG(base) ((base)->DCHPRI1) +#define DMA_DCHPRI0_REG(base) ((base)->DCHPRI0) +#define DMA_DCHPRI7_REG(base) ((base)->DCHPRI7) +#define DMA_DCHPRI6_REG(base) ((base)->DCHPRI6) +#define DMA_DCHPRI5_REG(base) ((base)->DCHPRI5) +#define DMA_DCHPRI4_REG(base) ((base)->DCHPRI4) +#define DMA_DCHPRI11_REG(base) ((base)->DCHPRI11) +#define DMA_DCHPRI10_REG(base) ((base)->DCHPRI10) +#define DMA_DCHPRI9_REG(base) ((base)->DCHPRI9) +#define DMA_DCHPRI8_REG(base) ((base)->DCHPRI8) +#define DMA_DCHPRI15_REG(base) ((base)->DCHPRI15) +#define DMA_DCHPRI14_REG(base) ((base)->DCHPRI14) +#define DMA_DCHPRI13_REG(base) ((base)->DCHPRI13) +#define DMA_DCHPRI12_REG(base) ((base)->DCHPRI12) +#define DMA_SADDR_REG(base,index) ((base)->TCD[index].SADDR) +#define DMA_SOFF_REG(base,index) ((base)->TCD[index].SOFF) +#define DMA_ATTR_REG(base,index) ((base)->TCD[index].ATTR) +#define DMA_NBYTES_MLNO_REG(base,index) ((base)->TCD[index].NBYTES_MLNO) +#define DMA_NBYTES_MLOFFNO_REG(base,index) ((base)->TCD[index].NBYTES_MLOFFNO) +#define DMA_NBYTES_MLOFFYES_REG(base,index) ((base)->TCD[index].NBYTES_MLOFFYES) +#define DMA_SLAST_REG(base,index) ((base)->TCD[index].SLAST) +#define DMA_DADDR_REG(base,index) ((base)->TCD[index].DADDR) +#define DMA_DOFF_REG(base,index) ((base)->TCD[index].DOFF) +#define DMA_CITER_ELINKNO_REG(base,index) ((base)->TCD[index].CITER_ELINKNO) +#define DMA_CITER_ELINKYES_REG(base,index) ((base)->TCD[index].CITER_ELINKYES) +#define DMA_DLAST_SGA_REG(base,index) ((base)->TCD[index].DLAST_SGA) +#define DMA_CSR_REG(base,index) ((base)->TCD[index].CSR) +#define DMA_BITER_ELINKNO_REG(base,index) ((base)->TCD[index].BITER_ELINKNO) +#define DMA_BITER_ELINKYES_REG(base,index) ((base)->TCD[index].BITER_ELINKYES) + +/*! + * @} + */ /* end of group DMA_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- DMA Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMA_Register_Masks DMA Register Masks + * @{ + */ + +/* CR Bit Fields */ +#define DMA_CR_EDBG_MASK 0x2u +#define DMA_CR_EDBG_SHIFT 1 +#define DMA_CR_ERCA_MASK 0x4u +#define DMA_CR_ERCA_SHIFT 2 +#define DMA_CR_HOE_MASK 0x10u +#define DMA_CR_HOE_SHIFT 4 +#define DMA_CR_HALT_MASK 0x20u +#define DMA_CR_HALT_SHIFT 5 +#define DMA_CR_CLM_MASK 0x40u +#define DMA_CR_CLM_SHIFT 6 +#define DMA_CR_EMLM_MASK 0x80u +#define DMA_CR_EMLM_SHIFT 7 +#define DMA_CR_ECX_MASK 0x10000u +#define DMA_CR_ECX_SHIFT 16 +#define DMA_CR_CX_MASK 0x20000u +#define DMA_CR_CX_SHIFT 17 +/* ES Bit Fields */ +#define DMA_ES_DBE_MASK 0x1u +#define DMA_ES_DBE_SHIFT 0 +#define DMA_ES_SBE_MASK 0x2u +#define DMA_ES_SBE_SHIFT 1 +#define DMA_ES_SGE_MASK 0x4u +#define DMA_ES_SGE_SHIFT 2 +#define DMA_ES_NCE_MASK 0x8u +#define DMA_ES_NCE_SHIFT 3 +#define DMA_ES_DOE_MASK 0x10u +#define DMA_ES_DOE_SHIFT 4 +#define DMA_ES_DAE_MASK 0x20u +#define DMA_ES_DAE_SHIFT 5 +#define DMA_ES_SOE_MASK 0x40u +#define DMA_ES_SOE_SHIFT 6 +#define DMA_ES_SAE_MASK 0x80u +#define DMA_ES_SAE_SHIFT 7 +#define DMA_ES_ERRCHN_MASK 0xF00u +#define DMA_ES_ERRCHN_SHIFT 8 +#define DMA_ES_ERRCHN(x) (((uint32_t)(((uint32_t)(x))<<DMA_ES_ERRCHN_SHIFT))&DMA_ES_ERRCHN_MASK) +#define DMA_ES_CPE_MASK 0x4000u +#define DMA_ES_CPE_SHIFT 14 +#define DMA_ES_ECX_MASK 0x10000u +#define DMA_ES_ECX_SHIFT 16 +#define DMA_ES_VLD_MASK 0x80000000u +#define DMA_ES_VLD_SHIFT 31 +/* ERQ Bit Fields */ +#define DMA_ERQ_ERQ0_MASK 0x1u +#define DMA_ERQ_ERQ0_SHIFT 0 +#define DMA_ERQ_ERQ1_MASK 0x2u +#define DMA_ERQ_ERQ1_SHIFT 1 +#define DMA_ERQ_ERQ2_MASK 0x4u +#define DMA_ERQ_ERQ2_SHIFT 2 +#define DMA_ERQ_ERQ3_MASK 0x8u +#define DMA_ERQ_ERQ3_SHIFT 3 +#define DMA_ERQ_ERQ4_MASK 0x10u +#define DMA_ERQ_ERQ4_SHIFT 4 +#define DMA_ERQ_ERQ5_MASK 0x20u +#define DMA_ERQ_ERQ5_SHIFT 5 +#define DMA_ERQ_ERQ6_MASK 0x40u +#define DMA_ERQ_ERQ6_SHIFT 6 +#define DMA_ERQ_ERQ7_MASK 0x80u +#define DMA_ERQ_ERQ7_SHIFT 7 +#define DMA_ERQ_ERQ8_MASK 0x100u +#define DMA_ERQ_ERQ8_SHIFT 8 +#define DMA_ERQ_ERQ9_MASK 0x200u +#define DMA_ERQ_ERQ9_SHIFT 9 +#define DMA_ERQ_ERQ10_MASK 0x400u +#define DMA_ERQ_ERQ10_SHIFT 10 +#define DMA_ERQ_ERQ11_MASK 0x800u +#define DMA_ERQ_ERQ11_SHIFT 11 +#define DMA_ERQ_ERQ12_MASK 0x1000u +#define DMA_ERQ_ERQ12_SHIFT 12 +#define DMA_ERQ_ERQ13_MASK 0x2000u +#define DMA_ERQ_ERQ13_SHIFT 13 +#define DMA_ERQ_ERQ14_MASK 0x4000u +#define DMA_ERQ_ERQ14_SHIFT 14 +#define DMA_ERQ_ERQ15_MASK 0x8000u +#define DMA_ERQ_ERQ15_SHIFT 15 +/* EEI Bit Fields */ +#define DMA_EEI_EEI0_MASK 0x1u +#define DMA_EEI_EEI0_SHIFT 0 +#define DMA_EEI_EEI1_MASK 0x2u +#define DMA_EEI_EEI1_SHIFT 1 +#define DMA_EEI_EEI2_MASK 0x4u +#define DMA_EEI_EEI2_SHIFT 2 +#define DMA_EEI_EEI3_MASK 0x8u +#define DMA_EEI_EEI3_SHIFT 3 +#define DMA_EEI_EEI4_MASK 0x10u +#define DMA_EEI_EEI4_SHIFT 4 +#define DMA_EEI_EEI5_MASK 0x20u +#define DMA_EEI_EEI5_SHIFT 5 +#define DMA_EEI_EEI6_MASK 0x40u +#define DMA_EEI_EEI6_SHIFT 6 +#define DMA_EEI_EEI7_MASK 0x80u +#define DMA_EEI_EEI7_SHIFT 7 +#define DMA_EEI_EEI8_MASK 0x100u +#define DMA_EEI_EEI8_SHIFT 8 +#define DMA_EEI_EEI9_MASK 0x200u +#define DMA_EEI_EEI9_SHIFT 9 +#define DMA_EEI_EEI10_MASK 0x400u +#define DMA_EEI_EEI10_SHIFT 10 +#define DMA_EEI_EEI11_MASK 0x800u +#define DMA_EEI_EEI11_SHIFT 11 +#define DMA_EEI_EEI12_MASK 0x1000u +#define DMA_EEI_EEI12_SHIFT 12 +#define DMA_EEI_EEI13_MASK 0x2000u +#define DMA_EEI_EEI13_SHIFT 13 +#define DMA_EEI_EEI14_MASK 0x4000u +#define DMA_EEI_EEI14_SHIFT 14 +#define DMA_EEI_EEI15_MASK 0x8000u +#define DMA_EEI_EEI15_SHIFT 15 +/* CEEI Bit Fields */ +#define DMA_CEEI_CEEI_MASK 0xFu +#define DMA_CEEI_CEEI_SHIFT 0 +#define DMA_CEEI_CEEI(x) (((uint8_t)(((uint8_t)(x))<<DMA_CEEI_CEEI_SHIFT))&DMA_CEEI_CEEI_MASK) +#define DMA_CEEI_CAEE_MASK 0x40u +#define DMA_CEEI_CAEE_SHIFT 6 +#define DMA_CEEI_NOP_MASK 0x80u +#define DMA_CEEI_NOP_SHIFT 7 +/* SEEI Bit Fields */ +#define DMA_SEEI_SEEI_MASK 0xFu +#define DMA_SEEI_SEEI_SHIFT 0 +#define DMA_SEEI_SEEI(x) (((uint8_t)(((uint8_t)(x))<<DMA_SEEI_SEEI_SHIFT))&DMA_SEEI_SEEI_MASK) +#define DMA_SEEI_SAEE_MASK 0x40u +#define DMA_SEEI_SAEE_SHIFT 6 +#define DMA_SEEI_NOP_MASK 0x80u +#define DMA_SEEI_NOP_SHIFT 7 +/* CERQ Bit Fields */ +#define DMA_CERQ_CERQ_MASK 0xFu +#define DMA_CERQ_CERQ_SHIFT 0 +#define DMA_CERQ_CERQ(x) (((uint8_t)(((uint8_t)(x))<<DMA_CERQ_CERQ_SHIFT))&DMA_CERQ_CERQ_MASK) +#define DMA_CERQ_CAER_MASK 0x40u +#define DMA_CERQ_CAER_SHIFT 6 +#define DMA_CERQ_NOP_MASK 0x80u +#define DMA_CERQ_NOP_SHIFT 7 +/* SERQ Bit Fields */ +#define DMA_SERQ_SERQ_MASK 0xFu +#define DMA_SERQ_SERQ_SHIFT 0 +#define DMA_SERQ_SERQ(x) (((uint8_t)(((uint8_t)(x))<<DMA_SERQ_SERQ_SHIFT))&DMA_SERQ_SERQ_MASK) +#define DMA_SERQ_SAER_MASK 0x40u +#define DMA_SERQ_SAER_SHIFT 6 +#define DMA_SERQ_NOP_MASK 0x80u +#define DMA_SERQ_NOP_SHIFT 7 +/* CDNE Bit Fields */ +#define DMA_CDNE_CDNE_MASK 0xFu +#define DMA_CDNE_CDNE_SHIFT 0 +#define DMA_CDNE_CDNE(x) (((uint8_t)(((uint8_t)(x))<<DMA_CDNE_CDNE_SHIFT))&DMA_CDNE_CDNE_MASK) +#define DMA_CDNE_CADN_MASK 0x40u +#define DMA_CDNE_CADN_SHIFT 6 +#define DMA_CDNE_NOP_MASK 0x80u +#define DMA_CDNE_NOP_SHIFT 7 +/* SSRT Bit Fields */ +#define DMA_SSRT_SSRT_MASK 0xFu +#define DMA_SSRT_SSRT_SHIFT 0 +#define DMA_SSRT_SSRT(x) (((uint8_t)(((uint8_t)(x))<<DMA_SSRT_SSRT_SHIFT))&DMA_SSRT_SSRT_MASK) +#define DMA_SSRT_SAST_MASK 0x40u +#define DMA_SSRT_SAST_SHIFT 6 +#define DMA_SSRT_NOP_MASK 0x80u +#define DMA_SSRT_NOP_SHIFT 7 +/* CERR Bit Fields */ +#define DMA_CERR_CERR_MASK 0xFu +#define DMA_CERR_CERR_SHIFT 0 +#define DMA_CERR_CERR(x) (((uint8_t)(((uint8_t)(x))<<DMA_CERR_CERR_SHIFT))&DMA_CERR_CERR_MASK) +#define DMA_CERR_CAEI_MASK 0x40u +#define DMA_CERR_CAEI_SHIFT 6 +#define DMA_CERR_NOP_MASK 0x80u +#define DMA_CERR_NOP_SHIFT 7 +/* CINT Bit Fields */ +#define DMA_CINT_CINT_MASK 0xFu +#define DMA_CINT_CINT_SHIFT 0 +#define DMA_CINT_CINT(x) (((uint8_t)(((uint8_t)(x))<<DMA_CINT_CINT_SHIFT))&DMA_CINT_CINT_MASK) +#define DMA_CINT_CAIR_MASK 0x40u +#define DMA_CINT_CAIR_SHIFT 6 +#define DMA_CINT_NOP_MASK 0x80u +#define DMA_CINT_NOP_SHIFT 7 +/* INT Bit Fields */ +#define DMA_INT_INT0_MASK 0x1u +#define DMA_INT_INT0_SHIFT 0 +#define DMA_INT_INT1_MASK 0x2u +#define DMA_INT_INT1_SHIFT 1 +#define DMA_INT_INT2_MASK 0x4u +#define DMA_INT_INT2_SHIFT 2 +#define DMA_INT_INT3_MASK 0x8u +#define DMA_INT_INT3_SHIFT 3 +#define DMA_INT_INT4_MASK 0x10u +#define DMA_INT_INT4_SHIFT 4 +#define DMA_INT_INT5_MASK 0x20u +#define DMA_INT_INT5_SHIFT 5 +#define DMA_INT_INT6_MASK 0x40u +#define DMA_INT_INT6_SHIFT 6 +#define DMA_INT_INT7_MASK 0x80u +#define DMA_INT_INT7_SHIFT 7 +#define DMA_INT_INT8_MASK 0x100u +#define DMA_INT_INT8_SHIFT 8 +#define DMA_INT_INT9_MASK 0x200u +#define DMA_INT_INT9_SHIFT 9 +#define DMA_INT_INT10_MASK 0x400u +#define DMA_INT_INT10_SHIFT 10 +#define DMA_INT_INT11_MASK 0x800u +#define DMA_INT_INT11_SHIFT 11 +#define DMA_INT_INT12_MASK 0x1000u +#define DMA_INT_INT12_SHIFT 12 +#define DMA_INT_INT13_MASK 0x2000u +#define DMA_INT_INT13_SHIFT 13 +#define DMA_INT_INT14_MASK 0x4000u +#define DMA_INT_INT14_SHIFT 14 +#define DMA_INT_INT15_MASK 0x8000u +#define DMA_INT_INT15_SHIFT 15 +/* ERR Bit Fields */ +#define DMA_ERR_ERR0_MASK 0x1u +#define DMA_ERR_ERR0_SHIFT 0 +#define DMA_ERR_ERR1_MASK 0x2u +#define DMA_ERR_ERR1_SHIFT 1 +#define DMA_ERR_ERR2_MASK 0x4u +#define DMA_ERR_ERR2_SHIFT 2 +#define DMA_ERR_ERR3_MASK 0x8u +#define DMA_ERR_ERR3_SHIFT 3 +#define DMA_ERR_ERR4_MASK 0x10u +#define DMA_ERR_ERR4_SHIFT 4 +#define DMA_ERR_ERR5_MASK 0x20u +#define DMA_ERR_ERR5_SHIFT 5 +#define DMA_ERR_ERR6_MASK 0x40u +#define DMA_ERR_ERR6_SHIFT 6 +#define DMA_ERR_ERR7_MASK 0x80u +#define DMA_ERR_ERR7_SHIFT 7 +#define DMA_ERR_ERR8_MASK 0x100u +#define DMA_ERR_ERR8_SHIFT 8 +#define DMA_ERR_ERR9_MASK 0x200u +#define DMA_ERR_ERR9_SHIFT 9 +#define DMA_ERR_ERR10_MASK 0x400u +#define DMA_ERR_ERR10_SHIFT 10 +#define DMA_ERR_ERR11_MASK 0x800u +#define DMA_ERR_ERR11_SHIFT 11 +#define DMA_ERR_ERR12_MASK 0x1000u +#define DMA_ERR_ERR12_SHIFT 12 +#define DMA_ERR_ERR13_MASK 0x2000u +#define DMA_ERR_ERR13_SHIFT 13 +#define DMA_ERR_ERR14_MASK 0x4000u +#define DMA_ERR_ERR14_SHIFT 14 +#define DMA_ERR_ERR15_MASK 0x8000u +#define DMA_ERR_ERR15_SHIFT 15 +/* HRS Bit Fields */ +#define DMA_HRS_HRS0_MASK 0x1u +#define DMA_HRS_HRS0_SHIFT 0 +#define DMA_HRS_HRS1_MASK 0x2u +#define DMA_HRS_HRS1_SHIFT 1 +#define DMA_HRS_HRS2_MASK 0x4u +#define DMA_HRS_HRS2_SHIFT 2 +#define DMA_HRS_HRS3_MASK 0x8u +#define DMA_HRS_HRS3_SHIFT 3 +#define DMA_HRS_HRS4_MASK 0x10u +#define DMA_HRS_HRS4_SHIFT 4 +#define DMA_HRS_HRS5_MASK 0x20u +#define DMA_HRS_HRS5_SHIFT 5 +#define DMA_HRS_HRS6_MASK 0x40u +#define DMA_HRS_HRS6_SHIFT 6 +#define DMA_HRS_HRS7_MASK 0x80u +#define DMA_HRS_HRS7_SHIFT 7 +#define DMA_HRS_HRS8_MASK 0x100u +#define DMA_HRS_HRS8_SHIFT 8 +#define DMA_HRS_HRS9_MASK 0x200u +#define DMA_HRS_HRS9_SHIFT 9 +#define DMA_HRS_HRS10_MASK 0x400u +#define DMA_HRS_HRS10_SHIFT 10 +#define DMA_HRS_HRS11_MASK 0x800u +#define DMA_HRS_HRS11_SHIFT 11 +#define DMA_HRS_HRS12_MASK 0x1000u +#define DMA_HRS_HRS12_SHIFT 12 +#define DMA_HRS_HRS13_MASK 0x2000u +#define DMA_HRS_HRS13_SHIFT 13 +#define DMA_HRS_HRS14_MASK 0x4000u +#define DMA_HRS_HRS14_SHIFT 14 +#define DMA_HRS_HRS15_MASK 0x8000u +#define DMA_HRS_HRS15_SHIFT 15 +/* EARS Bit Fields */ +#define DMA_EARS_EDREQ_0_MASK 0x1u +#define DMA_EARS_EDREQ_0_SHIFT 0 +#define DMA_EARS_EDREQ_1_MASK 0x2u +#define DMA_EARS_EDREQ_1_SHIFT 1 +#define DMA_EARS_EDREQ_2_MASK 0x4u +#define DMA_EARS_EDREQ_2_SHIFT 2 +#define DMA_EARS_EDREQ_3_MASK 0x8u +#define DMA_EARS_EDREQ_3_SHIFT 3 +#define DMA_EARS_EDREQ_4_MASK 0x10u +#define DMA_EARS_EDREQ_4_SHIFT 4 +#define DMA_EARS_EDREQ_5_MASK 0x20u +#define DMA_EARS_EDREQ_5_SHIFT 5 +#define DMA_EARS_EDREQ_6_MASK 0x40u +#define DMA_EARS_EDREQ_6_SHIFT 6 +#define DMA_EARS_EDREQ_7_MASK 0x80u +#define DMA_EARS_EDREQ_7_SHIFT 7 +#define DMA_EARS_EDREQ_8_MASK 0x100u +#define DMA_EARS_EDREQ_8_SHIFT 8 +#define DMA_EARS_EDREQ_9_MASK 0x200u +#define DMA_EARS_EDREQ_9_SHIFT 9 +#define DMA_EARS_EDREQ_10_MASK 0x400u +#define DMA_EARS_EDREQ_10_SHIFT 10 +#define DMA_EARS_EDREQ_11_MASK 0x800u +#define DMA_EARS_EDREQ_11_SHIFT 11 +#define DMA_EARS_EDREQ_12_MASK 0x1000u +#define DMA_EARS_EDREQ_12_SHIFT 12 +#define DMA_EARS_EDREQ_13_MASK 0x2000u +#define DMA_EARS_EDREQ_13_SHIFT 13 +#define DMA_EARS_EDREQ_14_MASK 0x4000u +#define DMA_EARS_EDREQ_14_SHIFT 14 +#define DMA_EARS_EDREQ_15_MASK 0x8000u +#define DMA_EARS_EDREQ_15_SHIFT 15 +/* DCHPRI3 Bit Fields */ +#define DMA_DCHPRI3_CHPRI_MASK 0xFu +#define DMA_DCHPRI3_CHPRI_SHIFT 0 +#define DMA_DCHPRI3_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI3_CHPRI_SHIFT))&DMA_DCHPRI3_CHPRI_MASK) +#define DMA_DCHPRI3_DPA_MASK 0x40u +#define DMA_DCHPRI3_DPA_SHIFT 6 +#define DMA_DCHPRI3_ECP_MASK 0x80u +#define DMA_DCHPRI3_ECP_SHIFT 7 +/* DCHPRI2 Bit Fields */ +#define DMA_DCHPRI2_CHPRI_MASK 0xFu +#define DMA_DCHPRI2_CHPRI_SHIFT 0 +#define DMA_DCHPRI2_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI2_CHPRI_SHIFT))&DMA_DCHPRI2_CHPRI_MASK) +#define DMA_DCHPRI2_DPA_MASK 0x40u +#define DMA_DCHPRI2_DPA_SHIFT 6 +#define DMA_DCHPRI2_ECP_MASK 0x80u +#define DMA_DCHPRI2_ECP_SHIFT 7 +/* DCHPRI1 Bit Fields */ +#define DMA_DCHPRI1_CHPRI_MASK 0xFu +#define DMA_DCHPRI1_CHPRI_SHIFT 0 +#define DMA_DCHPRI1_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI1_CHPRI_SHIFT))&DMA_DCHPRI1_CHPRI_MASK) +#define DMA_DCHPRI1_DPA_MASK 0x40u +#define DMA_DCHPRI1_DPA_SHIFT 6 +#define DMA_DCHPRI1_ECP_MASK 0x80u +#define DMA_DCHPRI1_ECP_SHIFT 7 +/* DCHPRI0 Bit Fields */ +#define DMA_DCHPRI0_CHPRI_MASK 0xFu +#define DMA_DCHPRI0_CHPRI_SHIFT 0 +#define DMA_DCHPRI0_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI0_CHPRI_SHIFT))&DMA_DCHPRI0_CHPRI_MASK) +#define DMA_DCHPRI0_DPA_MASK 0x40u +#define DMA_DCHPRI0_DPA_SHIFT 6 +#define DMA_DCHPRI0_ECP_MASK 0x80u +#define DMA_DCHPRI0_ECP_SHIFT 7 +/* DCHPRI7 Bit Fields */ +#define DMA_DCHPRI7_CHPRI_MASK 0xFu +#define DMA_DCHPRI7_CHPRI_SHIFT 0 +#define DMA_DCHPRI7_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI7_CHPRI_SHIFT))&DMA_DCHPRI7_CHPRI_MASK) +#define DMA_DCHPRI7_DPA_MASK 0x40u +#define DMA_DCHPRI7_DPA_SHIFT 6 +#define DMA_DCHPRI7_ECP_MASK 0x80u +#define DMA_DCHPRI7_ECP_SHIFT 7 +/* DCHPRI6 Bit Fields */ +#define DMA_DCHPRI6_CHPRI_MASK 0xFu +#define DMA_DCHPRI6_CHPRI_SHIFT 0 +#define DMA_DCHPRI6_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI6_CHPRI_SHIFT))&DMA_DCHPRI6_CHPRI_MASK) +#define DMA_DCHPRI6_DPA_MASK 0x40u +#define DMA_DCHPRI6_DPA_SHIFT 6 +#define DMA_DCHPRI6_ECP_MASK 0x80u +#define DMA_DCHPRI6_ECP_SHIFT 7 +/* DCHPRI5 Bit Fields */ +#define DMA_DCHPRI5_CHPRI_MASK 0xFu +#define DMA_DCHPRI5_CHPRI_SHIFT 0 +#define DMA_DCHPRI5_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI5_CHPRI_SHIFT))&DMA_DCHPRI5_CHPRI_MASK) +#define DMA_DCHPRI5_DPA_MASK 0x40u +#define DMA_DCHPRI5_DPA_SHIFT 6 +#define DMA_DCHPRI5_ECP_MASK 0x80u +#define DMA_DCHPRI5_ECP_SHIFT 7 +/* DCHPRI4 Bit Fields */ +#define DMA_DCHPRI4_CHPRI_MASK 0xFu +#define DMA_DCHPRI4_CHPRI_SHIFT 0 +#define DMA_DCHPRI4_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI4_CHPRI_SHIFT))&DMA_DCHPRI4_CHPRI_MASK) +#define DMA_DCHPRI4_DPA_MASK 0x40u +#define DMA_DCHPRI4_DPA_SHIFT 6 +#define DMA_DCHPRI4_ECP_MASK 0x80u +#define DMA_DCHPRI4_ECP_SHIFT 7 +/* DCHPRI11 Bit Fields */ +#define DMA_DCHPRI11_CHPRI_MASK 0xFu +#define DMA_DCHPRI11_CHPRI_SHIFT 0 +#define DMA_DCHPRI11_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI11_CHPRI_SHIFT))&DMA_DCHPRI11_CHPRI_MASK) +#define DMA_DCHPRI11_DPA_MASK 0x40u +#define DMA_DCHPRI11_DPA_SHIFT 6 +#define DMA_DCHPRI11_ECP_MASK 0x80u +#define DMA_DCHPRI11_ECP_SHIFT 7 +/* DCHPRI10 Bit Fields */ +#define DMA_DCHPRI10_CHPRI_MASK 0xFu +#define DMA_DCHPRI10_CHPRI_SHIFT 0 +#define DMA_DCHPRI10_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI10_CHPRI_SHIFT))&DMA_DCHPRI10_CHPRI_MASK) +#define DMA_DCHPRI10_DPA_MASK 0x40u +#define DMA_DCHPRI10_DPA_SHIFT 6 +#define DMA_DCHPRI10_ECP_MASK 0x80u +#define DMA_DCHPRI10_ECP_SHIFT 7 +/* DCHPRI9 Bit Fields */ +#define DMA_DCHPRI9_CHPRI_MASK 0xFu +#define DMA_DCHPRI9_CHPRI_SHIFT 0 +#define DMA_DCHPRI9_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI9_CHPRI_SHIFT))&DMA_DCHPRI9_CHPRI_MASK) +#define DMA_DCHPRI9_DPA_MASK 0x40u +#define DMA_DCHPRI9_DPA_SHIFT 6 +#define DMA_DCHPRI9_ECP_MASK 0x80u +#define DMA_DCHPRI9_ECP_SHIFT 7 +/* DCHPRI8 Bit Fields */ +#define DMA_DCHPRI8_CHPRI_MASK 0xFu +#define DMA_DCHPRI8_CHPRI_SHIFT 0 +#define DMA_DCHPRI8_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI8_CHPRI_SHIFT))&DMA_DCHPRI8_CHPRI_MASK) +#define DMA_DCHPRI8_DPA_MASK 0x40u +#define DMA_DCHPRI8_DPA_SHIFT 6 +#define DMA_DCHPRI8_ECP_MASK 0x80u +#define DMA_DCHPRI8_ECP_SHIFT 7 +/* DCHPRI15 Bit Fields */ +#define DMA_DCHPRI15_CHPRI_MASK 0xFu +#define DMA_DCHPRI15_CHPRI_SHIFT 0 +#define DMA_DCHPRI15_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI15_CHPRI_SHIFT))&DMA_DCHPRI15_CHPRI_MASK) +#define DMA_DCHPRI15_DPA_MASK 0x40u +#define DMA_DCHPRI15_DPA_SHIFT 6 +#define DMA_DCHPRI15_ECP_MASK 0x80u +#define DMA_DCHPRI15_ECP_SHIFT 7 +/* DCHPRI14 Bit Fields */ +#define DMA_DCHPRI14_CHPRI_MASK 0xFu +#define DMA_DCHPRI14_CHPRI_SHIFT 0 +#define DMA_DCHPRI14_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI14_CHPRI_SHIFT))&DMA_DCHPRI14_CHPRI_MASK) +#define DMA_DCHPRI14_DPA_MASK 0x40u +#define DMA_DCHPRI14_DPA_SHIFT 6 +#define DMA_DCHPRI14_ECP_MASK 0x80u +#define DMA_DCHPRI14_ECP_SHIFT 7 +/* DCHPRI13 Bit Fields */ +#define DMA_DCHPRI13_CHPRI_MASK 0xFu +#define DMA_DCHPRI13_CHPRI_SHIFT 0 +#define DMA_DCHPRI13_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI13_CHPRI_SHIFT))&DMA_DCHPRI13_CHPRI_MASK) +#define DMA_DCHPRI13_DPA_MASK 0x40u +#define DMA_DCHPRI13_DPA_SHIFT 6 +#define DMA_DCHPRI13_ECP_MASK 0x80u +#define DMA_DCHPRI13_ECP_SHIFT 7 +/* DCHPRI12 Bit Fields */ +#define DMA_DCHPRI12_CHPRI_MASK 0xFu +#define DMA_DCHPRI12_CHPRI_SHIFT 0 +#define DMA_DCHPRI12_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI12_CHPRI_SHIFT))&DMA_DCHPRI12_CHPRI_MASK) +#define DMA_DCHPRI12_DPA_MASK 0x40u +#define DMA_DCHPRI12_DPA_SHIFT 6 +#define DMA_DCHPRI12_ECP_MASK 0x80u +#define DMA_DCHPRI12_ECP_SHIFT 7 +/* SADDR Bit Fields */ +#define DMA_SADDR_SADDR_MASK 0xFFFFFFFFu +#define DMA_SADDR_SADDR_SHIFT 0 +#define DMA_SADDR_SADDR(x) (((uint32_t)(((uint32_t)(x))<<DMA_SADDR_SADDR_SHIFT))&DMA_SADDR_SADDR_MASK) +/* SOFF Bit Fields */ +#define DMA_SOFF_SOFF_MASK 0xFFFFu +#define DMA_SOFF_SOFF_SHIFT 0 +#define DMA_SOFF_SOFF(x) (((uint16_t)(((uint16_t)(x))<<DMA_SOFF_SOFF_SHIFT))&DMA_SOFF_SOFF_MASK) +/* ATTR Bit Fields */ +#define DMA_ATTR_DSIZE_MASK 0x7u +#define DMA_ATTR_DSIZE_SHIFT 0 +#define DMA_ATTR_DSIZE(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_DSIZE_SHIFT))&DMA_ATTR_DSIZE_MASK) +#define DMA_ATTR_DMOD_MASK 0xF8u +#define DMA_ATTR_DMOD_SHIFT 3 +#define DMA_ATTR_DMOD(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_DMOD_SHIFT))&DMA_ATTR_DMOD_MASK) +#define DMA_ATTR_SSIZE_MASK 0x700u +#define DMA_ATTR_SSIZE_SHIFT 8 +#define DMA_ATTR_SSIZE(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_SSIZE_SHIFT))&DMA_ATTR_SSIZE_MASK) +#define DMA_ATTR_SMOD_MASK 0xF800u +#define DMA_ATTR_SMOD_SHIFT 11 +#define DMA_ATTR_SMOD(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_SMOD_SHIFT))&DMA_ATTR_SMOD_MASK) +/* NBYTES_MLNO Bit Fields */ +#define DMA_NBYTES_MLNO_NBYTES_MASK 0xFFFFFFFFu +#define DMA_NBYTES_MLNO_NBYTES_SHIFT 0 +#define DMA_NBYTES_MLNO_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLNO_NBYTES_SHIFT))&DMA_NBYTES_MLNO_NBYTES_MASK) +/* NBYTES_MLOFFNO Bit Fields */ +#define DMA_NBYTES_MLOFFNO_NBYTES_MASK 0x3FFFFFFFu +#define DMA_NBYTES_MLOFFNO_NBYTES_SHIFT 0 +#define DMA_NBYTES_MLOFFNO_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFNO_NBYTES_SHIFT))&DMA_NBYTES_MLOFFNO_NBYTES_MASK) +#define DMA_NBYTES_MLOFFNO_DMLOE_MASK 0x40000000u +#define DMA_NBYTES_MLOFFNO_DMLOE_SHIFT 30 +#define DMA_NBYTES_MLOFFNO_SMLOE_MASK 0x80000000u +#define DMA_NBYTES_MLOFFNO_SMLOE_SHIFT 31 +/* NBYTES_MLOFFYES Bit Fields */ +#define DMA_NBYTES_MLOFFYES_NBYTES_MASK 0x3FFu +#define DMA_NBYTES_MLOFFYES_NBYTES_SHIFT 0 +#define DMA_NBYTES_MLOFFYES_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFYES_NBYTES_SHIFT))&DMA_NBYTES_MLOFFYES_NBYTES_MASK) +#define DMA_NBYTES_MLOFFYES_MLOFF_MASK 0x3FFFFC00u +#define DMA_NBYTES_MLOFFYES_MLOFF_SHIFT 10 +#define DMA_NBYTES_MLOFFYES_MLOFF(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFYES_MLOFF_SHIFT))&DMA_NBYTES_MLOFFYES_MLOFF_MASK) +#define DMA_NBYTES_MLOFFYES_DMLOE_MASK 0x40000000u +#define DMA_NBYTES_MLOFFYES_DMLOE_SHIFT 30 +#define DMA_NBYTES_MLOFFYES_SMLOE_MASK 0x80000000u +#define DMA_NBYTES_MLOFFYES_SMLOE_SHIFT 31 +/* SLAST Bit Fields */ +#define DMA_SLAST_SLAST_MASK 0xFFFFFFFFu +#define DMA_SLAST_SLAST_SHIFT 0 +#define DMA_SLAST_SLAST(x) (((uint32_t)(((uint32_t)(x))<<DMA_SLAST_SLAST_SHIFT))&DMA_SLAST_SLAST_MASK) +/* DADDR Bit Fields */ +#define DMA_DADDR_DADDR_MASK 0xFFFFFFFFu +#define DMA_DADDR_DADDR_SHIFT 0 +#define DMA_DADDR_DADDR(x) (((uint32_t)(((uint32_t)(x))<<DMA_DADDR_DADDR_SHIFT))&DMA_DADDR_DADDR_MASK) +/* DOFF Bit Fields */ +#define DMA_DOFF_DOFF_MASK 0xFFFFu +#define DMA_DOFF_DOFF_SHIFT 0 +#define DMA_DOFF_DOFF(x) (((uint16_t)(((uint16_t)(x))<<DMA_DOFF_DOFF_SHIFT))&DMA_DOFF_DOFF_MASK) +/* CITER_ELINKNO Bit Fields */ +#define DMA_CITER_ELINKNO_CITER_MASK 0x7FFFu +#define DMA_CITER_ELINKNO_CITER_SHIFT 0 +#define DMA_CITER_ELINKNO_CITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKNO_CITER_SHIFT))&DMA_CITER_ELINKNO_CITER_MASK) +#define DMA_CITER_ELINKNO_ELINK_MASK 0x8000u +#define DMA_CITER_ELINKNO_ELINK_SHIFT 15 +/* CITER_ELINKYES Bit Fields */ +#define DMA_CITER_ELINKYES_CITER_MASK 0x1FFu +#define DMA_CITER_ELINKYES_CITER_SHIFT 0 +#define DMA_CITER_ELINKYES_CITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKYES_CITER_SHIFT))&DMA_CITER_ELINKYES_CITER_MASK) +#define DMA_CITER_ELINKYES_LINKCH_MASK 0x1E00u +#define DMA_CITER_ELINKYES_LINKCH_SHIFT 9 +#define DMA_CITER_ELINKYES_LINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKYES_LINKCH_SHIFT))&DMA_CITER_ELINKYES_LINKCH_MASK) +#define DMA_CITER_ELINKYES_ELINK_MASK 0x8000u +#define DMA_CITER_ELINKYES_ELINK_SHIFT 15 +/* DLAST_SGA Bit Fields */ +#define DMA_DLAST_SGA_DLASTSGA_MASK 0xFFFFFFFFu +#define DMA_DLAST_SGA_DLASTSGA_SHIFT 0 +#define DMA_DLAST_SGA_DLASTSGA(x) (((uint32_t)(((uint32_t)(x))<<DMA_DLAST_SGA_DLASTSGA_SHIFT))&DMA_DLAST_SGA_DLASTSGA_MASK) +/* CSR Bit Fields */ +#define DMA_CSR_START_MASK 0x1u +#define DMA_CSR_START_SHIFT 0 +#define DMA_CSR_INTMAJOR_MASK 0x2u +#define DMA_CSR_INTMAJOR_SHIFT 1 +#define DMA_CSR_INTHALF_MASK 0x4u +#define DMA_CSR_INTHALF_SHIFT 2 +#define DMA_CSR_DREQ_MASK 0x8u +#define DMA_CSR_DREQ_SHIFT 3 +#define DMA_CSR_ESG_MASK 0x10u +#define DMA_CSR_ESG_SHIFT 4 +#define DMA_CSR_MAJORELINK_MASK 0x20u +#define DMA_CSR_MAJORELINK_SHIFT 5 +#define DMA_CSR_ACTIVE_MASK 0x40u +#define DMA_CSR_ACTIVE_SHIFT 6 +#define DMA_CSR_DONE_MASK 0x80u +#define DMA_CSR_DONE_SHIFT 7 +#define DMA_CSR_MAJORLINKCH_MASK 0xF00u +#define DMA_CSR_MAJORLINKCH_SHIFT 8 +#define DMA_CSR_MAJORLINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_CSR_MAJORLINKCH_SHIFT))&DMA_CSR_MAJORLINKCH_MASK) +#define DMA_CSR_BWC_MASK 0xC000u +#define DMA_CSR_BWC_SHIFT 14 +#define DMA_CSR_BWC(x) (((uint16_t)(((uint16_t)(x))<<DMA_CSR_BWC_SHIFT))&DMA_CSR_BWC_MASK) +/* BITER_ELINKNO Bit Fields */ +#define DMA_BITER_ELINKNO_BITER_MASK 0x7FFFu +#define DMA_BITER_ELINKNO_BITER_SHIFT 0 +#define DMA_BITER_ELINKNO_BITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKNO_BITER_SHIFT))&DMA_BITER_ELINKNO_BITER_MASK) +#define DMA_BITER_ELINKNO_ELINK_MASK 0x8000u +#define DMA_BITER_ELINKNO_ELINK_SHIFT 15 +/* BITER_ELINKYES Bit Fields */ +#define DMA_BITER_ELINKYES_BITER_MASK 0x1FFu +#define DMA_BITER_ELINKYES_BITER_SHIFT 0 +#define DMA_BITER_ELINKYES_BITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKYES_BITER_SHIFT))&DMA_BITER_ELINKYES_BITER_MASK) +#define DMA_BITER_ELINKYES_LINKCH_MASK 0x1E00u +#define DMA_BITER_ELINKYES_LINKCH_SHIFT 9 +#define DMA_BITER_ELINKYES_LINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKYES_LINKCH_SHIFT))&DMA_BITER_ELINKYES_LINKCH_MASK) +#define DMA_BITER_ELINKYES_ELINK_MASK 0x8000u +#define DMA_BITER_ELINKYES_ELINK_SHIFT 15 + +/*! + * @} + */ /* end of group DMA_Register_Masks */ + + +/* DMA - Peripheral instance base addresses */ +/** Peripheral DMA base address */ +#define DMA_BASE (0x40008000u) +/** Peripheral DMA base pointer */ +#define DMA0 ((DMA_Type *)DMA_BASE) +#define DMA_BASE_PTR (DMA0) +/** Array initializer of DMA peripheral base addresses */ +#define DMA_BASE_ADDRS { DMA_BASE } +/** Array initializer of DMA peripheral base pointers */ +#define DMA_BASE_PTRS { DMA0 } +/** Interrupt vectors for the DMA peripheral type */ +#define DMA_CHN_IRQS { DMA0_IRQn, DMA1_IRQn, DMA2_IRQn, DMA3_IRQn, DMA4_IRQn, DMA5_IRQn, DMA6_IRQn, DMA7_IRQn, DMA8_IRQn, DMA9_IRQn, DMA10_IRQn, DMA11_IRQn, DMA12_IRQn, DMA13_IRQn, DMA14_IRQn, DMA15_IRQn } +#define DMA_ERROR_IRQS { DMA_Error_IRQn } + +/* ---------------------------------------------------------------------------- + -- DMA - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMA_Register_Accessor_Macros DMA - Register accessor macros + * @{ + */ + + +/* DMA - Register instance definitions */ +/* DMA */ +#define DMA_CR DMA_CR_REG(DMA0) +#define DMA_ES DMA_ES_REG(DMA0) +#define DMA_ERQ DMA_ERQ_REG(DMA0) +#define DMA_EEI DMA_EEI_REG(DMA0) +#define DMA_CEEI DMA_CEEI_REG(DMA0) +#define DMA_SEEI DMA_SEEI_REG(DMA0) +#define DMA_CERQ DMA_CERQ_REG(DMA0) +#define DMA_SERQ DMA_SERQ_REG(DMA0) +#define DMA_CDNE DMA_CDNE_REG(DMA0) +#define DMA_SSRT DMA_SSRT_REG(DMA0) +#define DMA_CERR DMA_CERR_REG(DMA0) +#define DMA_CINT DMA_CINT_REG(DMA0) +#define DMA_INT DMA_INT_REG(DMA0) +#define DMA_ERR DMA_ERR_REG(DMA0) +#define DMA_HRS DMA_HRS_REG(DMA0) +#define DMA_EARS DMA_EARS_REG(DMA0) +#define DMA_DCHPRI3 DMA_DCHPRI3_REG(DMA0) +#define DMA_DCHPRI2 DMA_DCHPRI2_REG(DMA0) +#define DMA_DCHPRI1 DMA_DCHPRI1_REG(DMA0) +#define DMA_DCHPRI0 DMA_DCHPRI0_REG(DMA0) +#define DMA_DCHPRI7 DMA_DCHPRI7_REG(DMA0) +#define DMA_DCHPRI6 DMA_DCHPRI6_REG(DMA0) +#define DMA_DCHPRI5 DMA_DCHPRI5_REG(DMA0) +#define DMA_DCHPRI4 DMA_DCHPRI4_REG(DMA0) +#define DMA_DCHPRI11 DMA_DCHPRI11_REG(DMA0) +#define DMA_DCHPRI10 DMA_DCHPRI10_REG(DMA0) +#define DMA_DCHPRI9 DMA_DCHPRI9_REG(DMA0) +#define DMA_DCHPRI8 DMA_DCHPRI8_REG(DMA0) +#define DMA_DCHPRI15 DMA_DCHPRI15_REG(DMA0) +#define DMA_DCHPRI14 DMA_DCHPRI14_REG(DMA0) +#define DMA_DCHPRI13 DMA_DCHPRI13_REG(DMA0) +#define DMA_DCHPRI12 DMA_DCHPRI12_REG(DMA0) +#define DMA_TCD0_SADDR DMA_SADDR_REG(DMA0,0) +#define DMA_TCD0_SOFF DMA_SOFF_REG(DMA0,0) +#define DMA_TCD0_ATTR DMA_ATTR_REG(DMA0,0) +#define DMA_TCD0_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,0) +#define DMA_TCD0_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,0) +#define DMA_TCD0_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,0) +#define DMA_TCD0_SLAST DMA_SLAST_REG(DMA0,0) +#define DMA_TCD0_DADDR DMA_DADDR_REG(DMA0,0) +#define DMA_TCD0_DOFF DMA_DOFF_REG(DMA0,0) +#define DMA_TCD0_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,0) +#define DMA_TCD0_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,0) +#define DMA_TCD0_DLASTSGA DMA_DLAST_SGA_REG(DMA0,0) +#define DMA_TCD0_CSR DMA_CSR_REG(DMA0,0) +#define DMA_TCD0_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,0) +#define DMA_TCD0_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,0) +#define DMA_TCD1_SADDR DMA_SADDR_REG(DMA0,1) +#define DMA_TCD1_SOFF DMA_SOFF_REG(DMA0,1) +#define DMA_TCD1_ATTR DMA_ATTR_REG(DMA0,1) +#define DMA_TCD1_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,1) +#define DMA_TCD1_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,1) +#define DMA_TCD1_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,1) +#define DMA_TCD1_SLAST DMA_SLAST_REG(DMA0,1) +#define DMA_TCD1_DADDR DMA_DADDR_REG(DMA0,1) +#define DMA_TCD1_DOFF DMA_DOFF_REG(DMA0,1) +#define DMA_TCD1_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,1) +#define DMA_TCD1_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,1) +#define DMA_TCD1_DLASTSGA DMA_DLAST_SGA_REG(DMA0,1) +#define DMA_TCD1_CSR DMA_CSR_REG(DMA0,1) +#define DMA_TCD1_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,1) +#define DMA_TCD1_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,1) +#define DMA_TCD2_SADDR DMA_SADDR_REG(DMA0,2) +#define DMA_TCD2_SOFF DMA_SOFF_REG(DMA0,2) +#define DMA_TCD2_ATTR DMA_ATTR_REG(DMA0,2) +#define DMA_TCD2_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,2) +#define DMA_TCD2_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,2) +#define DMA_TCD2_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,2) +#define DMA_TCD2_SLAST DMA_SLAST_REG(DMA0,2) +#define DMA_TCD2_DADDR DMA_DADDR_REG(DMA0,2) +#define DMA_TCD2_DOFF DMA_DOFF_REG(DMA0,2) +#define DMA_TCD2_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,2) +#define DMA_TCD2_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,2) +#define DMA_TCD2_DLASTSGA DMA_DLAST_SGA_REG(DMA0,2) +#define DMA_TCD2_CSR DMA_CSR_REG(DMA0,2) +#define DMA_TCD2_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,2) +#define DMA_TCD2_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,2) +#define DMA_TCD3_SADDR DMA_SADDR_REG(DMA0,3) +#define DMA_TCD3_SOFF DMA_SOFF_REG(DMA0,3) +#define DMA_TCD3_ATTR DMA_ATTR_REG(DMA0,3) +#define DMA_TCD3_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,3) +#define DMA_TCD3_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,3) +#define DMA_TCD3_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,3) +#define DMA_TCD3_SLAST DMA_SLAST_REG(DMA0,3) +#define DMA_TCD3_DADDR DMA_DADDR_REG(DMA0,3) +#define DMA_TCD3_DOFF DMA_DOFF_REG(DMA0,3) +#define DMA_TCD3_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,3) +#define DMA_TCD3_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,3) +#define DMA_TCD3_DLASTSGA DMA_DLAST_SGA_REG(DMA0,3) +#define DMA_TCD3_CSR DMA_CSR_REG(DMA0,3) +#define DMA_TCD3_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,3) +#define DMA_TCD3_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,3) +#define DMA_TCD4_SADDR DMA_SADDR_REG(DMA0,4) +#define DMA_TCD4_SOFF DMA_SOFF_REG(DMA0,4) +#define DMA_TCD4_ATTR DMA_ATTR_REG(DMA0,4) +#define DMA_TCD4_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,4) +#define DMA_TCD4_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,4) +#define DMA_TCD4_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,4) +#define DMA_TCD4_SLAST DMA_SLAST_REG(DMA0,4) +#define DMA_TCD4_DADDR DMA_DADDR_REG(DMA0,4) +#define DMA_TCD4_DOFF DMA_DOFF_REG(DMA0,4) +#define DMA_TCD4_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,4) +#define DMA_TCD4_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,4) +#define DMA_TCD4_DLASTSGA DMA_DLAST_SGA_REG(DMA0,4) +#define DMA_TCD4_CSR DMA_CSR_REG(DMA0,4) +#define DMA_TCD4_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,4) +#define DMA_TCD4_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,4) +#define DMA_TCD5_SADDR DMA_SADDR_REG(DMA0,5) +#define DMA_TCD5_SOFF DMA_SOFF_REG(DMA0,5) +#define DMA_TCD5_ATTR DMA_ATTR_REG(DMA0,5) +#define DMA_TCD5_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,5) +#define DMA_TCD5_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,5) +#define DMA_TCD5_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,5) +#define DMA_TCD5_SLAST DMA_SLAST_REG(DMA0,5) +#define DMA_TCD5_DADDR DMA_DADDR_REG(DMA0,5) +#define DMA_TCD5_DOFF DMA_DOFF_REG(DMA0,5) +#define DMA_TCD5_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,5) +#define DMA_TCD5_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,5) +#define DMA_TCD5_DLASTSGA DMA_DLAST_SGA_REG(DMA0,5) +#define DMA_TCD5_CSR DMA_CSR_REG(DMA0,5) +#define DMA_TCD5_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,5) +#define DMA_TCD5_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,5) +#define DMA_TCD6_SADDR DMA_SADDR_REG(DMA0,6) +#define DMA_TCD6_SOFF DMA_SOFF_REG(DMA0,6) +#define DMA_TCD6_ATTR DMA_ATTR_REG(DMA0,6) +#define DMA_TCD6_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,6) +#define DMA_TCD6_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,6) +#define DMA_TCD6_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,6) +#define DMA_TCD6_SLAST DMA_SLAST_REG(DMA0,6) +#define DMA_TCD6_DADDR DMA_DADDR_REG(DMA0,6) +#define DMA_TCD6_DOFF DMA_DOFF_REG(DMA0,6) +#define DMA_TCD6_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,6) +#define DMA_TCD6_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,6) +#define DMA_TCD6_DLASTSGA DMA_DLAST_SGA_REG(DMA0,6) +#define DMA_TCD6_CSR DMA_CSR_REG(DMA0,6) +#define DMA_TCD6_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,6) +#define DMA_TCD6_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,6) +#define DMA_TCD7_SADDR DMA_SADDR_REG(DMA0,7) +#define DMA_TCD7_SOFF DMA_SOFF_REG(DMA0,7) +#define DMA_TCD7_ATTR DMA_ATTR_REG(DMA0,7) +#define DMA_TCD7_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,7) +#define DMA_TCD7_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,7) +#define DMA_TCD7_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,7) +#define DMA_TCD7_SLAST DMA_SLAST_REG(DMA0,7) +#define DMA_TCD7_DADDR DMA_DADDR_REG(DMA0,7) +#define DMA_TCD7_DOFF DMA_DOFF_REG(DMA0,7) +#define DMA_TCD7_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,7) +#define DMA_TCD7_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,7) +#define DMA_TCD7_DLASTSGA DMA_DLAST_SGA_REG(DMA0,7) +#define DMA_TCD7_CSR DMA_CSR_REG(DMA0,7) +#define DMA_TCD7_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,7) +#define DMA_TCD7_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,7) +#define DMA_TCD8_SADDR DMA_SADDR_REG(DMA0,8) +#define DMA_TCD8_SOFF DMA_SOFF_REG(DMA0,8) +#define DMA_TCD8_ATTR DMA_ATTR_REG(DMA0,8) +#define DMA_TCD8_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,8) +#define DMA_TCD8_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,8) +#define DMA_TCD8_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,8) +#define DMA_TCD8_SLAST DMA_SLAST_REG(DMA0,8) +#define DMA_TCD8_DADDR DMA_DADDR_REG(DMA0,8) +#define DMA_TCD8_DOFF DMA_DOFF_REG(DMA0,8) +#define DMA_TCD8_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,8) +#define DMA_TCD8_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,8) +#define DMA_TCD8_DLASTSGA DMA_DLAST_SGA_REG(DMA0,8) +#define DMA_TCD8_CSR DMA_CSR_REG(DMA0,8) +#define DMA_TCD8_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,8) +#define DMA_TCD8_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,8) +#define DMA_TCD9_SADDR DMA_SADDR_REG(DMA0,9) +#define DMA_TCD9_SOFF DMA_SOFF_REG(DMA0,9) +#define DMA_TCD9_ATTR DMA_ATTR_REG(DMA0,9) +#define DMA_TCD9_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,9) +#define DMA_TCD9_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,9) +#define DMA_TCD9_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,9) +#define DMA_TCD9_SLAST DMA_SLAST_REG(DMA0,9) +#define DMA_TCD9_DADDR DMA_DADDR_REG(DMA0,9) +#define DMA_TCD9_DOFF DMA_DOFF_REG(DMA0,9) +#define DMA_TCD9_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,9) +#define DMA_TCD9_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,9) +#define DMA_TCD9_DLASTSGA DMA_DLAST_SGA_REG(DMA0,9) +#define DMA_TCD9_CSR DMA_CSR_REG(DMA0,9) +#define DMA_TCD9_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,9) +#define DMA_TCD9_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,9) +#define DMA_TCD10_SADDR DMA_SADDR_REG(DMA0,10) +#define DMA_TCD10_SOFF DMA_SOFF_REG(DMA0,10) +#define DMA_TCD10_ATTR DMA_ATTR_REG(DMA0,10) +#define DMA_TCD10_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,10) +#define DMA_TCD10_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,10) +#define DMA_TCD10_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,10) +#define DMA_TCD10_SLAST DMA_SLAST_REG(DMA0,10) +#define DMA_TCD10_DADDR DMA_DADDR_REG(DMA0,10) +#define DMA_TCD10_DOFF DMA_DOFF_REG(DMA0,10) +#define DMA_TCD10_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,10) +#define DMA_TCD10_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,10) +#define DMA_TCD10_DLASTSGA DMA_DLAST_SGA_REG(DMA0,10) +#define DMA_TCD10_CSR DMA_CSR_REG(DMA0,10) +#define DMA_TCD10_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,10) +#define DMA_TCD10_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,10) +#define DMA_TCD11_SADDR DMA_SADDR_REG(DMA0,11) +#define DMA_TCD11_SOFF DMA_SOFF_REG(DMA0,11) +#define DMA_TCD11_ATTR DMA_ATTR_REG(DMA0,11) +#define DMA_TCD11_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,11) +#define DMA_TCD11_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,11) +#define DMA_TCD11_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,11) +#define DMA_TCD11_SLAST DMA_SLAST_REG(DMA0,11) +#define DMA_TCD11_DADDR DMA_DADDR_REG(DMA0,11) +#define DMA_TCD11_DOFF DMA_DOFF_REG(DMA0,11) +#define DMA_TCD11_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,11) +#define DMA_TCD11_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,11) +#define DMA_TCD11_DLASTSGA DMA_DLAST_SGA_REG(DMA0,11) +#define DMA_TCD11_CSR DMA_CSR_REG(DMA0,11) +#define DMA_TCD11_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,11) +#define DMA_TCD11_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,11) +#define DMA_TCD12_SADDR DMA_SADDR_REG(DMA0,12) +#define DMA_TCD12_SOFF DMA_SOFF_REG(DMA0,12) +#define DMA_TCD12_ATTR DMA_ATTR_REG(DMA0,12) +#define DMA_TCD12_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,12) +#define DMA_TCD12_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,12) +#define DMA_TCD12_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,12) +#define DMA_TCD12_SLAST DMA_SLAST_REG(DMA0,12) +#define DMA_TCD12_DADDR DMA_DADDR_REG(DMA0,12) +#define DMA_TCD12_DOFF DMA_DOFF_REG(DMA0,12) +#define DMA_TCD12_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,12) +#define DMA_TCD12_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,12) +#define DMA_TCD12_DLASTSGA DMA_DLAST_SGA_REG(DMA0,12) +#define DMA_TCD12_CSR DMA_CSR_REG(DMA0,12) +#define DMA_TCD12_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,12) +#define DMA_TCD12_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,12) +#define DMA_TCD13_SADDR DMA_SADDR_REG(DMA0,13) +#define DMA_TCD13_SOFF DMA_SOFF_REG(DMA0,13) +#define DMA_TCD13_ATTR DMA_ATTR_REG(DMA0,13) +#define DMA_TCD13_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,13) +#define DMA_TCD13_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,13) +#define DMA_TCD13_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,13) +#define DMA_TCD13_SLAST DMA_SLAST_REG(DMA0,13) +#define DMA_TCD13_DADDR DMA_DADDR_REG(DMA0,13) +#define DMA_TCD13_DOFF DMA_DOFF_REG(DMA0,13) +#define DMA_TCD13_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,13) +#define DMA_TCD13_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,13) +#define DMA_TCD13_DLASTSGA DMA_DLAST_SGA_REG(DMA0,13) +#define DMA_TCD13_CSR DMA_CSR_REG(DMA0,13) +#define DMA_TCD13_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,13) +#define DMA_TCD13_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,13) +#define DMA_TCD14_SADDR DMA_SADDR_REG(DMA0,14) +#define DMA_TCD14_SOFF DMA_SOFF_REG(DMA0,14) +#define DMA_TCD14_ATTR DMA_ATTR_REG(DMA0,14) +#define DMA_TCD14_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,14) +#define DMA_TCD14_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,14) +#define DMA_TCD14_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,14) +#define DMA_TCD14_SLAST DMA_SLAST_REG(DMA0,14) +#define DMA_TCD14_DADDR DMA_DADDR_REG(DMA0,14) +#define DMA_TCD14_DOFF DMA_DOFF_REG(DMA0,14) +#define DMA_TCD14_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,14) +#define DMA_TCD14_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,14) +#define DMA_TCD14_DLASTSGA DMA_DLAST_SGA_REG(DMA0,14) +#define DMA_TCD14_CSR DMA_CSR_REG(DMA0,14) +#define DMA_TCD14_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,14) +#define DMA_TCD14_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,14) +#define DMA_TCD15_SADDR DMA_SADDR_REG(DMA0,15) +#define DMA_TCD15_SOFF DMA_SOFF_REG(DMA0,15) +#define DMA_TCD15_ATTR DMA_ATTR_REG(DMA0,15) +#define DMA_TCD15_NBYTES_MLNO DMA_NBYTES_MLNO_REG(DMA0,15) +#define DMA_TCD15_NBYTES_MLOFFNO DMA_NBYTES_MLOFFNO_REG(DMA0,15) +#define DMA_TCD15_NBYTES_MLOFFYES DMA_NBYTES_MLOFFYES_REG(DMA0,15) +#define DMA_TCD15_SLAST DMA_SLAST_REG(DMA0,15) +#define DMA_TCD15_DADDR DMA_DADDR_REG(DMA0,15) +#define DMA_TCD15_DOFF DMA_DOFF_REG(DMA0,15) +#define DMA_TCD15_CITER_ELINKNO DMA_CITER_ELINKNO_REG(DMA0,15) +#define DMA_TCD15_CITER_ELINKYES DMA_CITER_ELINKYES_REG(DMA0,15) +#define DMA_TCD15_DLASTSGA DMA_DLAST_SGA_REG(DMA0,15) +#define DMA_TCD15_CSR DMA_CSR_REG(DMA0,15) +#define DMA_TCD15_BITER_ELINKNO DMA_BITER_ELINKNO_REG(DMA0,15) +#define DMA_TCD15_BITER_ELINKYES DMA_BITER_ELINKYES_REG(DMA0,15) + +/* DMA - Register array accessors */ +#define DMA_SADDR(index) DMA_SADDR_REG(DMA0,index) +#define DMA_SOFF(index) DMA_SOFF_REG(DMA0,index) +#define DMA_ATTR(index) DMA_ATTR_REG(DMA0,index) +#define DMA_NBYTES_MLNO(index) DMA_NBYTES_MLNO_REG(DMA0,index) +#define DMA_NBYTES_MLOFFNO(index) DMA_NBYTES_MLOFFNO_REG(DMA0,index) +#define DMA_NBYTES_MLOFFYES(index) DMA_NBYTES_MLOFFYES_REG(DMA0,index) +#define DMA_SLAST(index) DMA_SLAST_REG(DMA0,index) +#define DMA_DADDR(index) DMA_DADDR_REG(DMA0,index) +#define DMA_DOFF(index) DMA_DOFF_REG(DMA0,index) +#define DMA_CITER_ELINKNO(index) DMA_CITER_ELINKNO_REG(DMA0,index) +#define DMA_CITER_ELINKYES(index) DMA_CITER_ELINKYES_REG(DMA0,index) +#define DMA_DLAST_SGA(index) DMA_DLAST_SGA_REG(DMA0,index) +#define DMA_CSR(index) DMA_CSR_REG(DMA0,index) +#define DMA_BITER_ELINKNO(index) DMA_BITER_ELINKNO_REG(DMA0,index) +#define DMA_BITER_ELINKYES(index) DMA_BITER_ELINKYES_REG(DMA0,index) + +/*! + * @} + */ /* end of group DMA_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group DMA_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- DMAMUX Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMAMUX_Peripheral_Access_Layer DMAMUX Peripheral Access Layer + * @{ + */ + +/** DMAMUX - Register Layout Typedef */ +typedef struct { + __IO uint8_t CHCFG[16]; /**< Channel Configuration register, array offset: 0x0, array step: 0x1 */ +} DMAMUX_Type, *DMAMUX_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- DMAMUX - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMAMUX_Register_Accessor_Macros DMAMUX - Register accessor macros + * @{ + */ + + +/* DMAMUX - Register accessors */ +#define DMAMUX_CHCFG_REG(base,index) ((base)->CHCFG[index]) + +/*! + * @} + */ /* end of group DMAMUX_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- DMAMUX Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMAMUX_Register_Masks DMAMUX Register Masks + * @{ + */ + +/* CHCFG Bit Fields */ +#define DMAMUX_CHCFG_SOURCE_MASK 0x3Fu +#define DMAMUX_CHCFG_SOURCE_SHIFT 0 +#define DMAMUX_CHCFG_SOURCE(x) (((uint8_t)(((uint8_t)(x))<<DMAMUX_CHCFG_SOURCE_SHIFT))&DMAMUX_CHCFG_SOURCE_MASK) +#define DMAMUX_CHCFG_TRIG_MASK 0x40u +#define DMAMUX_CHCFG_TRIG_SHIFT 6 +#define DMAMUX_CHCFG_ENBL_MASK 0x80u +#define DMAMUX_CHCFG_ENBL_SHIFT 7 + +/*! + * @} + */ /* end of group DMAMUX_Register_Masks */ + + +/* DMAMUX - Peripheral instance base addresses */ +/** Peripheral DMAMUX base address */ +#define DMAMUX_BASE (0x40021000u) +/** Peripheral DMAMUX base pointer */ +#define DMAMUX ((DMAMUX_Type *)DMAMUX_BASE) +#define DMAMUX_BASE_PTR (DMAMUX) +/** Array initializer of DMAMUX peripheral base addresses */ +#define DMAMUX_BASE_ADDRS { DMAMUX_BASE } +/** Array initializer of DMAMUX peripheral base pointers */ +#define DMAMUX_BASE_PTRS { DMAMUX } + +/* ---------------------------------------------------------------------------- + -- DMAMUX - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup DMAMUX_Register_Accessor_Macros DMAMUX - Register accessor macros + * @{ + */ + + +/* DMAMUX - Register instance definitions */ +/* DMAMUX */ +#define DMAMUX_CHCFG0 DMAMUX_CHCFG_REG(DMAMUX,0) +#define DMAMUX_CHCFG1 DMAMUX_CHCFG_REG(DMAMUX,1) +#define DMAMUX_CHCFG2 DMAMUX_CHCFG_REG(DMAMUX,2) +#define DMAMUX_CHCFG3 DMAMUX_CHCFG_REG(DMAMUX,3) +#define DMAMUX_CHCFG4 DMAMUX_CHCFG_REG(DMAMUX,4) +#define DMAMUX_CHCFG5 DMAMUX_CHCFG_REG(DMAMUX,5) +#define DMAMUX_CHCFG6 DMAMUX_CHCFG_REG(DMAMUX,6) +#define DMAMUX_CHCFG7 DMAMUX_CHCFG_REG(DMAMUX,7) +#define DMAMUX_CHCFG8 DMAMUX_CHCFG_REG(DMAMUX,8) +#define DMAMUX_CHCFG9 DMAMUX_CHCFG_REG(DMAMUX,9) +#define DMAMUX_CHCFG10 DMAMUX_CHCFG_REG(DMAMUX,10) +#define DMAMUX_CHCFG11 DMAMUX_CHCFG_REG(DMAMUX,11) +#define DMAMUX_CHCFG12 DMAMUX_CHCFG_REG(DMAMUX,12) +#define DMAMUX_CHCFG13 DMAMUX_CHCFG_REG(DMAMUX,13) +#define DMAMUX_CHCFG14 DMAMUX_CHCFG_REG(DMAMUX,14) +#define DMAMUX_CHCFG15 DMAMUX_CHCFG_REG(DMAMUX,15) + +/* DMAMUX - Register array accessors */ +#define DMAMUX_CHCFG(index) DMAMUX_CHCFG_REG(DMAMUX,index) + +/*! + * @} + */ /* end of group DMAMUX_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group DMAMUX_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- EWM Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup EWM_Peripheral_Access_Layer EWM Peripheral Access Layer + * @{ + */ + +/** EWM - Register Layout Typedef */ +typedef struct { + __IO uint8_t CTRL; /**< Control Register, offset: 0x0 */ + __O uint8_t SERV; /**< Service Register, offset: 0x1 */ + __IO uint8_t CMPL; /**< Compare Low Register, offset: 0x2 */ + __IO uint8_t CMPH; /**< Compare High Register, offset: 0x3 */ + uint8_t RESERVED_0[1]; + __IO uint8_t CLKPRESCALER; /**< Clock Prescaler Register, offset: 0x5 */ +} EWM_Type, *EWM_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- EWM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup EWM_Register_Accessor_Macros EWM - Register accessor macros + * @{ + */ + + +/* EWM - Register accessors */ +#define EWM_CTRL_REG(base) ((base)->CTRL) +#define EWM_SERV_REG(base) ((base)->SERV) +#define EWM_CMPL_REG(base) ((base)->CMPL) +#define EWM_CMPH_REG(base) ((base)->CMPH) +#define EWM_CLKPRESCALER_REG(base) ((base)->CLKPRESCALER) + +/*! + * @} + */ /* end of group EWM_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- EWM Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup EWM_Register_Masks EWM Register Masks + * @{ + */ + +/* CTRL Bit Fields */ +#define EWM_CTRL_EWMEN_MASK 0x1u +#define EWM_CTRL_EWMEN_SHIFT 0 +#define EWM_CTRL_ASSIN_MASK 0x2u +#define EWM_CTRL_ASSIN_SHIFT 1 +#define EWM_CTRL_INEN_MASK 0x4u +#define EWM_CTRL_INEN_SHIFT 2 +#define EWM_CTRL_INTEN_MASK 0x8u +#define EWM_CTRL_INTEN_SHIFT 3 +/* SERV Bit Fields */ +#define EWM_SERV_SERVICE_MASK 0xFFu +#define EWM_SERV_SERVICE_SHIFT 0 +#define EWM_SERV_SERVICE(x) (((uint8_t)(((uint8_t)(x))<<EWM_SERV_SERVICE_SHIFT))&EWM_SERV_SERVICE_MASK) +/* CMPL Bit Fields */ +#define EWM_CMPL_COMPAREL_MASK 0xFFu +#define EWM_CMPL_COMPAREL_SHIFT 0 +#define EWM_CMPL_COMPAREL(x) (((uint8_t)(((uint8_t)(x))<<EWM_CMPL_COMPAREL_SHIFT))&EWM_CMPL_COMPAREL_MASK) +/* CMPH Bit Fields */ +#define EWM_CMPH_COMPAREH_MASK 0xFFu +#define EWM_CMPH_COMPAREH_SHIFT 0 +#define EWM_CMPH_COMPAREH(x) (((uint8_t)(((uint8_t)(x))<<EWM_CMPH_COMPAREH_SHIFT))&EWM_CMPH_COMPAREH_MASK) +/* CLKPRESCALER Bit Fields */ +#define EWM_CLKPRESCALER_CLK_DIV_MASK 0xFFu +#define EWM_CLKPRESCALER_CLK_DIV_SHIFT 0 +#define EWM_CLKPRESCALER_CLK_DIV(x) (((uint8_t)(((uint8_t)(x))<<EWM_CLKPRESCALER_CLK_DIV_SHIFT))&EWM_CLKPRESCALER_CLK_DIV_MASK) + +/*! + * @} + */ /* end of group EWM_Register_Masks */ + + +/* EWM - Peripheral instance base addresses */ +/** Peripheral EWM base address */ +#define EWM_BASE (0x40061000u) +/** Peripheral EWM base pointer */ +#define EWM ((EWM_Type *)EWM_BASE) +#define EWM_BASE_PTR (EWM) +/** Array initializer of EWM peripheral base addresses */ +#define EWM_BASE_ADDRS { EWM_BASE } +/** Array initializer of EWM peripheral base pointers */ +#define EWM_BASE_PTRS { EWM } +/** Interrupt vectors for the EWM peripheral type */ +#define EWM_IRQS { Watchdog_IRQn } + +/* ---------------------------------------------------------------------------- + -- EWM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup EWM_Register_Accessor_Macros EWM - Register accessor macros + * @{ + */ + + +/* EWM - Register instance definitions */ +/* EWM */ +#define EWM_CTRL EWM_CTRL_REG(EWM) +#define EWM_SERV EWM_SERV_REG(EWM) +#define EWM_CMPL EWM_CMPL_REG(EWM) +#define EWM_CMPH EWM_CMPH_REG(EWM) +#define EWM_CLKPRESCALER EWM_CLKPRESCALER_REG(EWM) + +/*! + * @} + */ /* end of group EWM_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group EWM_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- FB Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FB_Peripheral_Access_Layer FB Peripheral Access Layer + * @{ + */ + +/** FB - Register Layout Typedef */ +typedef struct { + struct { /* offset: 0x0, array step: 0xC */ + __IO uint32_t CSAR; /**< Chip Select Address Register, array offset: 0x0, array step: 0xC */ + __IO uint32_t CSMR; /**< Chip Select Mask Register, array offset: 0x4, array step: 0xC */ + __IO uint32_t CSCR; /**< Chip Select Control Register, array offset: 0x8, array step: 0xC */ + } CS[6]; + uint8_t RESERVED_0[24]; + __IO uint32_t CSPMCR; /**< Chip Select port Multiplexing Control Register, offset: 0x60 */ +} FB_Type, *FB_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- FB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FB_Register_Accessor_Macros FB - Register accessor macros + * @{ + */ + + +/* FB - Register accessors */ +#define FB_CSAR_REG(base,index) ((base)->CS[index].CSAR) +#define FB_CSMR_REG(base,index) ((base)->CS[index].CSMR) +#define FB_CSCR_REG(base,index) ((base)->CS[index].CSCR) +#define FB_CSPMCR_REG(base) ((base)->CSPMCR) + +/*! + * @} + */ /* end of group FB_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- FB Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FB_Register_Masks FB Register Masks + * @{ + */ + +/* CSAR Bit Fields */ +#define FB_CSAR_BA_MASK 0xFFFF0000u +#define FB_CSAR_BA_SHIFT 16 +#define FB_CSAR_BA(x) (((uint32_t)(((uint32_t)(x))<<FB_CSAR_BA_SHIFT))&FB_CSAR_BA_MASK) +/* CSMR Bit Fields */ +#define FB_CSMR_V_MASK 0x1u +#define FB_CSMR_V_SHIFT 0 +#define FB_CSMR_WP_MASK 0x100u +#define FB_CSMR_WP_SHIFT 8 +#define FB_CSMR_BAM_MASK 0xFFFF0000u +#define FB_CSMR_BAM_SHIFT 16 +#define FB_CSMR_BAM(x) (((uint32_t)(((uint32_t)(x))<<FB_CSMR_BAM_SHIFT))&FB_CSMR_BAM_MASK) +/* CSCR Bit Fields */ +#define FB_CSCR_BSTW_MASK 0x8u +#define FB_CSCR_BSTW_SHIFT 3 +#define FB_CSCR_BSTR_MASK 0x10u +#define FB_CSCR_BSTR_SHIFT 4 +#define FB_CSCR_BEM_MASK 0x20u +#define FB_CSCR_BEM_SHIFT 5 +#define FB_CSCR_PS_MASK 0xC0u +#define FB_CSCR_PS_SHIFT 6 +#define FB_CSCR_PS(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_PS_SHIFT))&FB_CSCR_PS_MASK) +#define FB_CSCR_AA_MASK 0x100u +#define FB_CSCR_AA_SHIFT 8 +#define FB_CSCR_BLS_MASK 0x200u +#define FB_CSCR_BLS_SHIFT 9 +#define FB_CSCR_WS_MASK 0xFC00u +#define FB_CSCR_WS_SHIFT 10 +#define FB_CSCR_WS(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_WS_SHIFT))&FB_CSCR_WS_MASK) +#define FB_CSCR_WRAH_MASK 0x30000u +#define FB_CSCR_WRAH_SHIFT 16 +#define FB_CSCR_WRAH(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_WRAH_SHIFT))&FB_CSCR_WRAH_MASK) +#define FB_CSCR_RDAH_MASK 0xC0000u +#define FB_CSCR_RDAH_SHIFT 18 +#define FB_CSCR_RDAH(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_RDAH_SHIFT))&FB_CSCR_RDAH_MASK) +#define FB_CSCR_ASET_MASK 0x300000u +#define FB_CSCR_ASET_SHIFT 20 +#define FB_CSCR_ASET(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_ASET_SHIFT))&FB_CSCR_ASET_MASK) +#define FB_CSCR_EXTS_MASK 0x400000u +#define FB_CSCR_EXTS_SHIFT 22 +#define FB_CSCR_SWSEN_MASK 0x800000u +#define FB_CSCR_SWSEN_SHIFT 23 +#define FB_CSCR_SWS_MASK 0xFC000000u +#define FB_CSCR_SWS_SHIFT 26 +#define FB_CSCR_SWS(x) (((uint32_t)(((uint32_t)(x))<<FB_CSCR_SWS_SHIFT))&FB_CSCR_SWS_MASK) +/* CSPMCR Bit Fields */ +#define FB_CSPMCR_GROUP5_MASK 0xF000u +#define FB_CSPMCR_GROUP5_SHIFT 12 +#define FB_CSPMCR_GROUP5(x) (((uint32_t)(((uint32_t)(x))<<FB_CSPMCR_GROUP5_SHIFT))&FB_CSPMCR_GROUP5_MASK) +#define FB_CSPMCR_GROUP4_MASK 0xF0000u +#define FB_CSPMCR_GROUP4_SHIFT 16 +#define FB_CSPMCR_GROUP4(x) (((uint32_t)(((uint32_t)(x))<<FB_CSPMCR_GROUP4_SHIFT))&FB_CSPMCR_GROUP4_MASK) +#define FB_CSPMCR_GROUP3_MASK 0xF00000u +#define FB_CSPMCR_GROUP3_SHIFT 20 +#define FB_CSPMCR_GROUP3(x) (((uint32_t)(((uint32_t)(x))<<FB_CSPMCR_GROUP3_SHIFT))&FB_CSPMCR_GROUP3_MASK) +#define FB_CSPMCR_GROUP2_MASK 0xF000000u +#define FB_CSPMCR_GROUP2_SHIFT 24 +#define FB_CSPMCR_GROUP2(x) (((uint32_t)(((uint32_t)(x))<<FB_CSPMCR_GROUP2_SHIFT))&FB_CSPMCR_GROUP2_MASK) +#define FB_CSPMCR_GROUP1_MASK 0xF0000000u +#define FB_CSPMCR_GROUP1_SHIFT 28 +#define FB_CSPMCR_GROUP1(x) (((uint32_t)(((uint32_t)(x))<<FB_CSPMCR_GROUP1_SHIFT))&FB_CSPMCR_GROUP1_MASK) + +/*! + * @} + */ /* end of group FB_Register_Masks */ + + +/* FB - Peripheral instance base addresses */ +/** Peripheral FB base address */ +#define FB_BASE (0x4000C000u) +/** Peripheral FB base pointer */ +#define FB ((FB_Type *)FB_BASE) +#define FB_BASE_PTR (FB) +/** Array initializer of FB peripheral base addresses */ +#define FB_BASE_ADDRS { FB_BASE } +/** Array initializer of FB peripheral base pointers */ +#define FB_BASE_PTRS { FB } + +/* ---------------------------------------------------------------------------- + -- FB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FB_Register_Accessor_Macros FB - Register accessor macros + * @{ + */ + + +/* FB - Register instance definitions */ +/* FB */ +#define FB_CSAR0 FB_CSAR_REG(FB,0) +#define FB_CSMR0 FB_CSMR_REG(FB,0) +#define FB_CSCR0 FB_CSCR_REG(FB,0) +#define FB_CSAR1 FB_CSAR_REG(FB,1) +#define FB_CSMR1 FB_CSMR_REG(FB,1) +#define FB_CSCR1 FB_CSCR_REG(FB,1) +#define FB_CSAR2 FB_CSAR_REG(FB,2) +#define FB_CSMR2 FB_CSMR_REG(FB,2) +#define FB_CSCR2 FB_CSCR_REG(FB,2) +#define FB_CSAR3 FB_CSAR_REG(FB,3) +#define FB_CSMR3 FB_CSMR_REG(FB,3) +#define FB_CSCR3 FB_CSCR_REG(FB,3) +#define FB_CSAR4 FB_CSAR_REG(FB,4) +#define FB_CSMR4 FB_CSMR_REG(FB,4) +#define FB_CSCR4 FB_CSCR_REG(FB,4) +#define FB_CSAR5 FB_CSAR_REG(FB,5) +#define FB_CSMR5 FB_CSMR_REG(FB,5) +#define FB_CSCR5 FB_CSCR_REG(FB,5) +#define FB_CSPMCR FB_CSPMCR_REG(FB) + +/* FB - Register array accessors */ +#define FB_CSAR(index) FB_CSAR_REG(FB,index) +#define FB_CSMR(index) FB_CSMR_REG(FB,index) +#define FB_CSCR(index) FB_CSCR_REG(FB,index) + +/*! + * @} + */ /* end of group FB_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group FB_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- FMC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FMC_Peripheral_Access_Layer FMC Peripheral Access Layer + * @{ + */ + +/** FMC - Register Layout Typedef */ +typedef struct { + __IO uint32_t PFAPR; /**< Flash Access Protection Register, offset: 0x0 */ + __IO uint32_t PFB0CR; /**< Flash Bank 0 Control Register, offset: 0x4 */ + __IO uint32_t PFB1CR; /**< Flash Bank 1 Control Register, offset: 0x8 */ + uint8_t RESERVED_0[244]; + __IO uint32_t TAGVDW0S[8]; /**< Cache Tag Storage, array offset: 0x100, array step: 0x4 */ + __IO uint32_t TAGVDW1S[8]; /**< Cache Tag Storage, array offset: 0x120, array step: 0x4 */ + __IO uint32_t TAGVDW2S[8]; /**< Cache Tag Storage, array offset: 0x140, array step: 0x4 */ + __IO uint32_t TAGVDW3S[8]; /**< Cache Tag Storage, array offset: 0x160, array step: 0x4 */ + uint8_t RESERVED_1[128]; + struct { /* offset: 0x200, array step: index*0x40, index2*0x8 */ + __IO uint32_t DATA_U; /**< Cache Data Storage (upper word), array offset: 0x200, array step: index*0x40, index2*0x8 */ + __IO uint32_t DATA_L; /**< Cache Data Storage (lower word), array offset: 0x204, array step: index*0x40, index2*0x8 */ + } SET[4][8]; +} FMC_Type, *FMC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- FMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FMC_Register_Accessor_Macros FMC - Register accessor macros + * @{ + */ + + +/* FMC - Register accessors */ +#define FMC_PFAPR_REG(base) ((base)->PFAPR) +#define FMC_PFB0CR_REG(base) ((base)->PFB0CR) +#define FMC_PFB1CR_REG(base) ((base)->PFB1CR) +#define FMC_TAGVDW0S_REG(base,index) ((base)->TAGVDW0S[index]) +#define FMC_TAGVDW1S_REG(base,index) ((base)->TAGVDW1S[index]) +#define FMC_TAGVDW2S_REG(base,index) ((base)->TAGVDW2S[index]) +#define FMC_TAGVDW3S_REG(base,index) ((base)->TAGVDW3S[index]) +#define FMC_DATA_U_REG(base,index,index2) ((base)->SET[index][index2].DATA_U) +#define FMC_DATA_L_REG(base,index,index2) ((base)->SET[index][index2].DATA_L) + +/*! + * @} + */ /* end of group FMC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- FMC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FMC_Register_Masks FMC Register Masks + * @{ + */ + +/* PFAPR Bit Fields */ +#define FMC_PFAPR_M0AP_MASK 0x3u +#define FMC_PFAPR_M0AP_SHIFT 0 +#define FMC_PFAPR_M0AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M0AP_SHIFT))&FMC_PFAPR_M0AP_MASK) +#define FMC_PFAPR_M1AP_MASK 0xCu +#define FMC_PFAPR_M1AP_SHIFT 2 +#define FMC_PFAPR_M1AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M1AP_SHIFT))&FMC_PFAPR_M1AP_MASK) +#define FMC_PFAPR_M2AP_MASK 0x30u +#define FMC_PFAPR_M2AP_SHIFT 4 +#define FMC_PFAPR_M2AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M2AP_SHIFT))&FMC_PFAPR_M2AP_MASK) +#define FMC_PFAPR_M3AP_MASK 0xC0u +#define FMC_PFAPR_M3AP_SHIFT 6 +#define FMC_PFAPR_M3AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M3AP_SHIFT))&FMC_PFAPR_M3AP_MASK) +#define FMC_PFAPR_M4AP_MASK 0x300u +#define FMC_PFAPR_M4AP_SHIFT 8 +#define FMC_PFAPR_M4AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M4AP_SHIFT))&FMC_PFAPR_M4AP_MASK) +#define FMC_PFAPR_M5AP_MASK 0xC00u +#define FMC_PFAPR_M5AP_SHIFT 10 +#define FMC_PFAPR_M5AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M5AP_SHIFT))&FMC_PFAPR_M5AP_MASK) +#define FMC_PFAPR_M6AP_MASK 0x3000u +#define FMC_PFAPR_M6AP_SHIFT 12 +#define FMC_PFAPR_M6AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M6AP_SHIFT))&FMC_PFAPR_M6AP_MASK) +#define FMC_PFAPR_M7AP_MASK 0xC000u +#define FMC_PFAPR_M7AP_SHIFT 14 +#define FMC_PFAPR_M7AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M7AP_SHIFT))&FMC_PFAPR_M7AP_MASK) +#define FMC_PFAPR_M0PFD_MASK 0x10000u +#define FMC_PFAPR_M0PFD_SHIFT 16 +#define FMC_PFAPR_M1PFD_MASK 0x20000u +#define FMC_PFAPR_M1PFD_SHIFT 17 +#define FMC_PFAPR_M2PFD_MASK 0x40000u +#define FMC_PFAPR_M2PFD_SHIFT 18 +#define FMC_PFAPR_M3PFD_MASK 0x80000u +#define FMC_PFAPR_M3PFD_SHIFT 19 +#define FMC_PFAPR_M4PFD_MASK 0x100000u +#define FMC_PFAPR_M4PFD_SHIFT 20 +#define FMC_PFAPR_M5PFD_MASK 0x200000u +#define FMC_PFAPR_M5PFD_SHIFT 21 +#define FMC_PFAPR_M6PFD_MASK 0x400000u +#define FMC_PFAPR_M6PFD_SHIFT 22 +#define FMC_PFAPR_M7PFD_MASK 0x800000u +#define FMC_PFAPR_M7PFD_SHIFT 23 +/* PFB0CR Bit Fields */ +#define FMC_PFB0CR_B0SEBE_MASK 0x1u +#define FMC_PFB0CR_B0SEBE_SHIFT 0 +#define FMC_PFB0CR_B0IPE_MASK 0x2u +#define FMC_PFB0CR_B0IPE_SHIFT 1 +#define FMC_PFB0CR_B0DPE_MASK 0x4u +#define FMC_PFB0CR_B0DPE_SHIFT 2 +#define FMC_PFB0CR_B0ICE_MASK 0x8u +#define FMC_PFB0CR_B0ICE_SHIFT 3 +#define FMC_PFB0CR_B0DCE_MASK 0x10u +#define FMC_PFB0CR_B0DCE_SHIFT 4 +#define FMC_PFB0CR_CRC_MASK 0xE0u +#define FMC_PFB0CR_CRC_SHIFT 5 +#define FMC_PFB0CR_CRC(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CRC_SHIFT))&FMC_PFB0CR_CRC_MASK) +#define FMC_PFB0CR_B0MW_MASK 0x60000u +#define FMC_PFB0CR_B0MW_SHIFT 17 +#define FMC_PFB0CR_B0MW(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_B0MW_SHIFT))&FMC_PFB0CR_B0MW_MASK) +#define FMC_PFB0CR_S_B_INV_MASK 0x80000u +#define FMC_PFB0CR_S_B_INV_SHIFT 19 +#define FMC_PFB0CR_CINV_WAY_MASK 0xF00000u +#define FMC_PFB0CR_CINV_WAY_SHIFT 20 +#define FMC_PFB0CR_CINV_WAY(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CINV_WAY_SHIFT))&FMC_PFB0CR_CINV_WAY_MASK) +#define FMC_PFB0CR_CLCK_WAY_MASK 0xF000000u +#define FMC_PFB0CR_CLCK_WAY_SHIFT 24 +#define FMC_PFB0CR_CLCK_WAY(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CLCK_WAY_SHIFT))&FMC_PFB0CR_CLCK_WAY_MASK) +#define FMC_PFB0CR_B0RWSC_MASK 0xF0000000u +#define FMC_PFB0CR_B0RWSC_SHIFT 28 +#define FMC_PFB0CR_B0RWSC(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_B0RWSC_SHIFT))&FMC_PFB0CR_B0RWSC_MASK) +/* PFB1CR Bit Fields */ +#define FMC_PFB1CR_B1SEBE_MASK 0x1u +#define FMC_PFB1CR_B1SEBE_SHIFT 0 +#define FMC_PFB1CR_B1IPE_MASK 0x2u +#define FMC_PFB1CR_B1IPE_SHIFT 1 +#define FMC_PFB1CR_B1DPE_MASK 0x4u +#define FMC_PFB1CR_B1DPE_SHIFT 2 +#define FMC_PFB1CR_B1ICE_MASK 0x8u +#define FMC_PFB1CR_B1ICE_SHIFT 3 +#define FMC_PFB1CR_B1DCE_MASK 0x10u +#define FMC_PFB1CR_B1DCE_SHIFT 4 +#define FMC_PFB1CR_B1MW_MASK 0x60000u +#define FMC_PFB1CR_B1MW_SHIFT 17 +#define FMC_PFB1CR_B1MW(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB1CR_B1MW_SHIFT))&FMC_PFB1CR_B1MW_MASK) +#define FMC_PFB1CR_B1RWSC_MASK 0xF0000000u +#define FMC_PFB1CR_B1RWSC_SHIFT 28 +#define FMC_PFB1CR_B1RWSC(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB1CR_B1RWSC_SHIFT))&FMC_PFB1CR_B1RWSC_MASK) +/* TAGVDW0S Bit Fields */ +#define FMC_TAGVDW0S_valid_MASK 0x1u +#define FMC_TAGVDW0S_valid_SHIFT 0 +#define FMC_TAGVDW0S_tag_MASK 0x7FFE0u +#define FMC_TAGVDW0S_tag_SHIFT 5 +#define FMC_TAGVDW0S_tag(x) (((uint32_t)(((uint32_t)(x))<<FMC_TAGVDW0S_tag_SHIFT))&FMC_TAGVDW0S_tag_MASK) +/* TAGVDW1S Bit Fields */ +#define FMC_TAGVDW1S_valid_MASK 0x1u +#define FMC_TAGVDW1S_valid_SHIFT 0 +#define FMC_TAGVDW1S_tag_MASK 0x7FFE0u +#define FMC_TAGVDW1S_tag_SHIFT 5 +#define FMC_TAGVDW1S_tag(x) (((uint32_t)(((uint32_t)(x))<<FMC_TAGVDW1S_tag_SHIFT))&FMC_TAGVDW1S_tag_MASK) +/* TAGVDW2S Bit Fields */ +#define FMC_TAGVDW2S_valid_MASK 0x1u +#define FMC_TAGVDW2S_valid_SHIFT 0 +#define FMC_TAGVDW2S_tag_MASK 0x7FFE0u +#define FMC_TAGVDW2S_tag_SHIFT 5 +#define FMC_TAGVDW2S_tag(x) (((uint32_t)(((uint32_t)(x))<<FMC_TAGVDW2S_tag_SHIFT))&FMC_TAGVDW2S_tag_MASK) +/* TAGVDW3S Bit Fields */ +#define FMC_TAGVDW3S_valid_MASK 0x1u +#define FMC_TAGVDW3S_valid_SHIFT 0 +#define FMC_TAGVDW3S_tag_MASK 0x7FFE0u +#define FMC_TAGVDW3S_tag_SHIFT 5 +#define FMC_TAGVDW3S_tag(x) (((uint32_t)(((uint32_t)(x))<<FMC_TAGVDW3S_tag_SHIFT))&FMC_TAGVDW3S_tag_MASK) +/* DATA_U Bit Fields */ +#define FMC_DATA_U_data_MASK 0xFFFFFFFFu +#define FMC_DATA_U_data_SHIFT 0 +#define FMC_DATA_U_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATA_U_data_SHIFT))&FMC_DATA_U_data_MASK) +/* DATA_L Bit Fields */ +#define FMC_DATA_L_data_MASK 0xFFFFFFFFu +#define FMC_DATA_L_data_SHIFT 0 +#define FMC_DATA_L_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATA_L_data_SHIFT))&FMC_DATA_L_data_MASK) + +/*! + * @} + */ /* end of group FMC_Register_Masks */ + + +/* FMC - Peripheral instance base addresses */ +/** Peripheral FMC base address */ +#define FMC_BASE (0x4001F000u) +/** Peripheral FMC base pointer */ +#define FMC ((FMC_Type *)FMC_BASE) +#define FMC_BASE_PTR (FMC) +/** Array initializer of FMC peripheral base addresses */ +#define FMC_BASE_ADDRS { FMC_BASE } +/** Array initializer of FMC peripheral base pointers */ +#define FMC_BASE_PTRS { FMC } + +/* ---------------------------------------------------------------------------- + -- FMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FMC_Register_Accessor_Macros FMC - Register accessor macros + * @{ + */ + + +/* FMC - Register instance definitions */ +/* FMC */ +#define FMC_PFAPR FMC_PFAPR_REG(FMC) +#define FMC_PFB0CR FMC_PFB0CR_REG(FMC) +#define FMC_PFB1CR FMC_PFB1CR_REG(FMC) +#define FMC_TAGVDW0S0 FMC_TAGVDW0S_REG(FMC,0) +#define FMC_TAGVDW0S1 FMC_TAGVDW0S_REG(FMC,1) +#define FMC_TAGVDW0S2 FMC_TAGVDW0S_REG(FMC,2) +#define FMC_TAGVDW0S3 FMC_TAGVDW0S_REG(FMC,3) +#define FMC_TAGVDW0S4 FMC_TAGVDW0S_REG(FMC,4) +#define FMC_TAGVDW0S5 FMC_TAGVDW0S_REG(FMC,5) +#define FMC_TAGVDW0S6 FMC_TAGVDW0S_REG(FMC,6) +#define FMC_TAGVDW0S7 FMC_TAGVDW0S_REG(FMC,7) +#define FMC_TAGVDW1S0 FMC_TAGVDW1S_REG(FMC,0) +#define FMC_TAGVDW1S1 FMC_TAGVDW1S_REG(FMC,1) +#define FMC_TAGVDW1S2 FMC_TAGVDW1S_REG(FMC,2) +#define FMC_TAGVDW1S3 FMC_TAGVDW1S_REG(FMC,3) +#define FMC_TAGVDW1S4 FMC_TAGVDW1S_REG(FMC,4) +#define FMC_TAGVDW1S5 FMC_TAGVDW1S_REG(FMC,5) +#define FMC_TAGVDW1S6 FMC_TAGVDW1S_REG(FMC,6) +#define FMC_TAGVDW1S7 FMC_TAGVDW1S_REG(FMC,7) +#define FMC_TAGVDW2S0 FMC_TAGVDW2S_REG(FMC,0) +#define FMC_TAGVDW2S1 FMC_TAGVDW2S_REG(FMC,1) +#define FMC_TAGVDW2S2 FMC_TAGVDW2S_REG(FMC,2) +#define FMC_TAGVDW2S3 FMC_TAGVDW2S_REG(FMC,3) +#define FMC_TAGVDW2S4 FMC_TAGVDW2S_REG(FMC,4) +#define FMC_TAGVDW2S5 FMC_TAGVDW2S_REG(FMC,5) +#define FMC_TAGVDW2S6 FMC_TAGVDW2S_REG(FMC,6) +#define FMC_TAGVDW2S7 FMC_TAGVDW2S_REG(FMC,7) +#define FMC_TAGVDW3S0 FMC_TAGVDW3S_REG(FMC,0) +#define FMC_TAGVDW3S1 FMC_TAGVDW3S_REG(FMC,1) +#define FMC_TAGVDW3S2 FMC_TAGVDW3S_REG(FMC,2) +#define FMC_TAGVDW3S3 FMC_TAGVDW3S_REG(FMC,3) +#define FMC_TAGVDW3S4 FMC_TAGVDW3S_REG(FMC,4) +#define FMC_TAGVDW3S5 FMC_TAGVDW3S_REG(FMC,5) +#define FMC_TAGVDW3S6 FMC_TAGVDW3S_REG(FMC,6) +#define FMC_TAGVDW3S7 FMC_TAGVDW3S_REG(FMC,7) +#define FMC_DATAW0S0U FMC_DATA_U_REG(FMC,0,0) +#define FMC_DATAW0S0L FMC_DATA_L_REG(FMC,0,0) +#define FMC_DATAW0S1U FMC_DATA_U_REG(FMC,0,1) +#define FMC_DATAW0S1L FMC_DATA_L_REG(FMC,0,1) +#define FMC_DATAW0S2U FMC_DATA_U_REG(FMC,0,2) +#define FMC_DATAW0S2L FMC_DATA_L_REG(FMC,0,2) +#define FMC_DATAW0S3U FMC_DATA_U_REG(FMC,0,3) +#define FMC_DATAW0S3L FMC_DATA_L_REG(FMC,0,3) +#define FMC_DATAW0S4U FMC_DATA_U_REG(FMC,0,4) +#define FMC_DATAW0S4L FMC_DATA_L_REG(FMC,0,4) +#define FMC_DATAW0S5U FMC_DATA_U_REG(FMC,0,5) +#define FMC_DATAW0S5L FMC_DATA_L_REG(FMC,0,5) +#define FMC_DATAW0S6U FMC_DATA_U_REG(FMC,0,6) +#define FMC_DATAW0S6L FMC_DATA_L_REG(FMC,0,6) +#define FMC_DATAW0S7U FMC_DATA_U_REG(FMC,0,7) +#define FMC_DATAW0S7L FMC_DATA_L_REG(FMC,0,7) +#define FMC_DATAW1S0U FMC_DATA_U_REG(FMC,1,0) +#define FMC_DATAW1S0L FMC_DATA_L_REG(FMC,1,0) +#define FMC_DATAW1S1U FMC_DATA_U_REG(FMC,1,1) +#define FMC_DATAW1S1L FMC_DATA_L_REG(FMC,1,1) +#define FMC_DATAW1S2U FMC_DATA_U_REG(FMC,1,2) +#define FMC_DATAW1S2L FMC_DATA_L_REG(FMC,1,2) +#define FMC_DATAW1S3U FMC_DATA_U_REG(FMC,1,3) +#define FMC_DATAW1S3L FMC_DATA_L_REG(FMC,1,3) +#define FMC_DATAW1S4U FMC_DATA_U_REG(FMC,1,4) +#define FMC_DATAW1S4L FMC_DATA_L_REG(FMC,1,4) +#define FMC_DATAW1S5U FMC_DATA_U_REG(FMC,1,5) +#define FMC_DATAW1S5L FMC_DATA_L_REG(FMC,1,5) +#define FMC_DATAW1S6U FMC_DATA_U_REG(FMC,1,6) +#define FMC_DATAW1S6L FMC_DATA_L_REG(FMC,1,6) +#define FMC_DATAW1S7U FMC_DATA_U_REG(FMC,1,7) +#define FMC_DATAW1S7L FMC_DATA_L_REG(FMC,1,7) +#define FMC_DATAW2S0U FMC_DATA_U_REG(FMC,2,0) +#define FMC_DATAW2S0L FMC_DATA_L_REG(FMC,2,0) +#define FMC_DATAW2S1U FMC_DATA_U_REG(FMC,2,1) +#define FMC_DATAW2S1L FMC_DATA_L_REG(FMC,2,1) +#define FMC_DATAW2S2U FMC_DATA_U_REG(FMC,2,2) +#define FMC_DATAW2S2L FMC_DATA_L_REG(FMC,2,2) +#define FMC_DATAW2S3U FMC_DATA_U_REG(FMC,2,3) +#define FMC_DATAW2S3L FMC_DATA_L_REG(FMC,2,3) +#define FMC_DATAW2S4U FMC_DATA_U_REG(FMC,2,4) +#define FMC_DATAW2S4L FMC_DATA_L_REG(FMC,2,4) +#define FMC_DATAW2S5U FMC_DATA_U_REG(FMC,2,5) +#define FMC_DATAW2S5L FMC_DATA_L_REG(FMC,2,5) +#define FMC_DATAW2S6U FMC_DATA_U_REG(FMC,2,6) +#define FMC_DATAW2S6L FMC_DATA_L_REG(FMC,2,6) +#define FMC_DATAW2S7U FMC_DATA_U_REG(FMC,2,7) +#define FMC_DATAW2S7L FMC_DATA_L_REG(FMC,2,7) +#define FMC_DATAW3S0U FMC_DATA_U_REG(FMC,3,0) +#define FMC_DATAW3S0L FMC_DATA_L_REG(FMC,3,0) +#define FMC_DATAW3S1U FMC_DATA_U_REG(FMC,3,1) +#define FMC_DATAW3S1L FMC_DATA_L_REG(FMC,3,1) +#define FMC_DATAW3S2U FMC_DATA_U_REG(FMC,3,2) +#define FMC_DATAW3S2L FMC_DATA_L_REG(FMC,3,2) +#define FMC_DATAW3S3U FMC_DATA_U_REG(FMC,3,3) +#define FMC_DATAW3S3L FMC_DATA_L_REG(FMC,3,3) +#define FMC_DATAW3S4U FMC_DATA_U_REG(FMC,3,4) +#define FMC_DATAW3S4L FMC_DATA_L_REG(FMC,3,4) +#define FMC_DATAW3S5U FMC_DATA_U_REG(FMC,3,5) +#define FMC_DATAW3S5L FMC_DATA_L_REG(FMC,3,5) +#define FMC_DATAW3S6U FMC_DATA_U_REG(FMC,3,6) +#define FMC_DATAW3S6L FMC_DATA_L_REG(FMC,3,6) +#define FMC_DATAW3S7U FMC_DATA_U_REG(FMC,3,7) +#define FMC_DATAW3S7L FMC_DATA_L_REG(FMC,3,7) + +/* FMC - Register array accessors */ +#define FMC_TAGVDW0S(index) FMC_TAGVDW0S_REG(FMC,index) +#define FMC_TAGVDW1S(index) FMC_TAGVDW1S_REG(FMC,index) +#define FMC_TAGVDW2S(index) FMC_TAGVDW2S_REG(FMC,index) +#define FMC_TAGVDW3S(index) FMC_TAGVDW3S_REG(FMC,index) +#define FMC_DATA_U(index,index2) FMC_DATA_U_REG(FMC,index,index2) +#define FMC_DATA_L(index,index2) FMC_DATA_L_REG(FMC,index,index2) + +/*! + * @} + */ /* end of group FMC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group FMC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- FTFA Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTFA_Peripheral_Access_Layer FTFA Peripheral Access Layer + * @{ + */ + +/** FTFA - Register Layout Typedef */ +typedef struct { + __IO uint8_t FSTAT; /**< Flash Status Register, offset: 0x0 */ + __IO uint8_t FCNFG; /**< Flash Configuration Register, offset: 0x1 */ + __I uint8_t FSEC; /**< Flash Security Register, offset: 0x2 */ + __I uint8_t FOPT; /**< Flash Option Register, offset: 0x3 */ + __IO uint8_t FCCOB3; /**< Flash Common Command Object Registers, offset: 0x4 */ + __IO uint8_t FCCOB2; /**< Flash Common Command Object Registers, offset: 0x5 */ + __IO uint8_t FCCOB1; /**< Flash Common Command Object Registers, offset: 0x6 */ + __IO uint8_t FCCOB0; /**< Flash Common Command Object Registers, offset: 0x7 */ + __IO uint8_t FCCOB7; /**< Flash Common Command Object Registers, offset: 0x8 */ + __IO uint8_t FCCOB6; /**< Flash Common Command Object Registers, offset: 0x9 */ + __IO uint8_t FCCOB5; /**< Flash Common Command Object Registers, offset: 0xA */ + __IO uint8_t FCCOB4; /**< Flash Common Command Object Registers, offset: 0xB */ + __IO uint8_t FCCOBB; /**< Flash Common Command Object Registers, offset: 0xC */ + __IO uint8_t FCCOBA; /**< Flash Common Command Object Registers, offset: 0xD */ + __IO uint8_t FCCOB9; /**< Flash Common Command Object Registers, offset: 0xE */ + __IO uint8_t FCCOB8; /**< Flash Common Command Object Registers, offset: 0xF */ + __IO uint8_t FPROT3; /**< Program Flash Protection Registers, offset: 0x10 */ + __IO uint8_t FPROT2; /**< Program Flash Protection Registers, offset: 0x11 */ + __IO uint8_t FPROT1; /**< Program Flash Protection Registers, offset: 0x12 */ + __IO uint8_t FPROT0; /**< Program Flash Protection Registers, offset: 0x13 */ + uint8_t RESERVED_0[4]; + __I uint8_t XACCH3; /**< Execute-only Access Registers, offset: 0x18 */ + __I uint8_t XACCH2; /**< Execute-only Access Registers, offset: 0x19 */ + __I uint8_t XACCH1; /**< Execute-only Access Registers, offset: 0x1A */ + __I uint8_t XACCH0; /**< Execute-only Access Registers, offset: 0x1B */ + __I uint8_t XACCL3; /**< Execute-only Access Registers, offset: 0x1C */ + __I uint8_t XACCL2; /**< Execute-only Access Registers, offset: 0x1D */ + __I uint8_t XACCL1; /**< Execute-only Access Registers, offset: 0x1E */ + __I uint8_t XACCL0; /**< Execute-only Access Registers, offset: 0x1F */ + __I uint8_t SACCH3; /**< Supervisor-only Access Registers, offset: 0x20 */ + __I uint8_t SACCH2; /**< Supervisor-only Access Registers, offset: 0x21 */ + __I uint8_t SACCH1; /**< Supervisor-only Access Registers, offset: 0x22 */ + __I uint8_t SACCH0; /**< Supervisor-only Access Registers, offset: 0x23 */ + __I uint8_t SACCL3; /**< Supervisor-only Access Registers, offset: 0x24 */ + __I uint8_t SACCL2; /**< Supervisor-only Access Registers, offset: 0x25 */ + __I uint8_t SACCL1; /**< Supervisor-only Access Registers, offset: 0x26 */ + __I uint8_t SACCL0; /**< Supervisor-only Access Registers, offset: 0x27 */ + __I uint8_t FACSS; /**< Flash Access Segment Size Register, offset: 0x28 */ + uint8_t RESERVED_1[2]; + __I uint8_t FACSN; /**< Flash Access Segment Number Register, offset: 0x2B */ +} FTFA_Type, *FTFA_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- FTFA - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTFA_Register_Accessor_Macros FTFA - Register accessor macros + * @{ + */ + + +/* FTFA - Register accessors */ +#define FTFA_FSTAT_REG(base) ((base)->FSTAT) +#define FTFA_FCNFG_REG(base) ((base)->FCNFG) +#define FTFA_FSEC_REG(base) ((base)->FSEC) +#define FTFA_FOPT_REG(base) ((base)->FOPT) +#define FTFA_FCCOB3_REG(base) ((base)->FCCOB3) +#define FTFA_FCCOB2_REG(base) ((base)->FCCOB2) +#define FTFA_FCCOB1_REG(base) ((base)->FCCOB1) +#define FTFA_FCCOB0_REG(base) ((base)->FCCOB0) +#define FTFA_FCCOB7_REG(base) ((base)->FCCOB7) +#define FTFA_FCCOB6_REG(base) ((base)->FCCOB6) +#define FTFA_FCCOB5_REG(base) ((base)->FCCOB5) +#define FTFA_FCCOB4_REG(base) ((base)->FCCOB4) +#define FTFA_FCCOBB_REG(base) ((base)->FCCOBB) +#define FTFA_FCCOBA_REG(base) ((base)->FCCOBA) +#define FTFA_FCCOB9_REG(base) ((base)->FCCOB9) +#define FTFA_FCCOB8_REG(base) ((base)->FCCOB8) +#define FTFA_FPROT3_REG(base) ((base)->FPROT3) +#define FTFA_FPROT2_REG(base) ((base)->FPROT2) +#define FTFA_FPROT1_REG(base) ((base)->FPROT1) +#define FTFA_FPROT0_REG(base) ((base)->FPROT0) +#define FTFA_XACCH3_REG(base) ((base)->XACCH3) +#define FTFA_XACCH2_REG(base) ((base)->XACCH2) +#define FTFA_XACCH1_REG(base) ((base)->XACCH1) +#define FTFA_XACCH0_REG(base) ((base)->XACCH0) +#define FTFA_XACCL3_REG(base) ((base)->XACCL3) +#define FTFA_XACCL2_REG(base) ((base)->XACCL2) +#define FTFA_XACCL1_REG(base) ((base)->XACCL1) +#define FTFA_XACCL0_REG(base) ((base)->XACCL0) +#define FTFA_SACCH3_REG(base) ((base)->SACCH3) +#define FTFA_SACCH2_REG(base) ((base)->SACCH2) +#define FTFA_SACCH1_REG(base) ((base)->SACCH1) +#define FTFA_SACCH0_REG(base) ((base)->SACCH0) +#define FTFA_SACCL3_REG(base) ((base)->SACCL3) +#define FTFA_SACCL2_REG(base) ((base)->SACCL2) +#define FTFA_SACCL1_REG(base) ((base)->SACCL1) +#define FTFA_SACCL0_REG(base) ((base)->SACCL0) +#define FTFA_FACSS_REG(base) ((base)->FACSS) +#define FTFA_FACSN_REG(base) ((base)->FACSN) + +/*! + * @} + */ /* end of group FTFA_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- FTFA Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTFA_Register_Masks FTFA Register Masks + * @{ + */ + +/* FSTAT Bit Fields */ +#define FTFA_FSTAT_MGSTAT0_MASK 0x1u +#define FTFA_FSTAT_MGSTAT0_SHIFT 0 +#define FTFA_FSTAT_FPVIOL_MASK 0x10u +#define FTFA_FSTAT_FPVIOL_SHIFT 4 +#define FTFA_FSTAT_ACCERR_MASK 0x20u +#define FTFA_FSTAT_ACCERR_SHIFT 5 +#define FTFA_FSTAT_RDCOLERR_MASK 0x40u +#define FTFA_FSTAT_RDCOLERR_SHIFT 6 +#define FTFA_FSTAT_CCIF_MASK 0x80u +#define FTFA_FSTAT_CCIF_SHIFT 7 +/* FCNFG Bit Fields */ +#define FTFA_FCNFG_ERSSUSP_MASK 0x10u +#define FTFA_FCNFG_ERSSUSP_SHIFT 4 +#define FTFA_FCNFG_ERSAREQ_MASK 0x20u +#define FTFA_FCNFG_ERSAREQ_SHIFT 5 +#define FTFA_FCNFG_RDCOLLIE_MASK 0x40u +#define FTFA_FCNFG_RDCOLLIE_SHIFT 6 +#define FTFA_FCNFG_CCIE_MASK 0x80u +#define FTFA_FCNFG_CCIE_SHIFT 7 +/* FSEC Bit Fields */ +#define FTFA_FSEC_SEC_MASK 0x3u +#define FTFA_FSEC_SEC_SHIFT 0 +#define FTFA_FSEC_SEC(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FSEC_SEC_SHIFT))&FTFA_FSEC_SEC_MASK) +#define FTFA_FSEC_FSLACC_MASK 0xCu +#define FTFA_FSEC_FSLACC_SHIFT 2 +#define FTFA_FSEC_FSLACC(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FSEC_FSLACC_SHIFT))&FTFA_FSEC_FSLACC_MASK) +#define FTFA_FSEC_MEEN_MASK 0x30u +#define FTFA_FSEC_MEEN_SHIFT 4 +#define FTFA_FSEC_MEEN(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FSEC_MEEN_SHIFT))&FTFA_FSEC_MEEN_MASK) +#define FTFA_FSEC_KEYEN_MASK 0xC0u +#define FTFA_FSEC_KEYEN_SHIFT 6 +#define FTFA_FSEC_KEYEN(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FSEC_KEYEN_SHIFT))&FTFA_FSEC_KEYEN_MASK) +/* FOPT Bit Fields */ +#define FTFA_FOPT_OPT_MASK 0xFFu +#define FTFA_FOPT_OPT_SHIFT 0 +#define FTFA_FOPT_OPT(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FOPT_OPT_SHIFT))&FTFA_FOPT_OPT_MASK) +/* FCCOB3 Bit Fields */ +#define FTFA_FCCOB3_CCOBn_MASK 0xFFu +#define FTFA_FCCOB3_CCOBn_SHIFT 0 +#define FTFA_FCCOB3_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB3_CCOBn_SHIFT))&FTFA_FCCOB3_CCOBn_MASK) +/* FCCOB2 Bit Fields */ +#define FTFA_FCCOB2_CCOBn_MASK 0xFFu +#define FTFA_FCCOB2_CCOBn_SHIFT 0 +#define FTFA_FCCOB2_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB2_CCOBn_SHIFT))&FTFA_FCCOB2_CCOBn_MASK) +/* FCCOB1 Bit Fields */ +#define FTFA_FCCOB1_CCOBn_MASK 0xFFu +#define FTFA_FCCOB1_CCOBn_SHIFT 0 +#define FTFA_FCCOB1_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB1_CCOBn_SHIFT))&FTFA_FCCOB1_CCOBn_MASK) +/* FCCOB0 Bit Fields */ +#define FTFA_FCCOB0_CCOBn_MASK 0xFFu +#define FTFA_FCCOB0_CCOBn_SHIFT 0 +#define FTFA_FCCOB0_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB0_CCOBn_SHIFT))&FTFA_FCCOB0_CCOBn_MASK) +/* FCCOB7 Bit Fields */ +#define FTFA_FCCOB7_CCOBn_MASK 0xFFu +#define FTFA_FCCOB7_CCOBn_SHIFT 0 +#define FTFA_FCCOB7_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB7_CCOBn_SHIFT))&FTFA_FCCOB7_CCOBn_MASK) +/* FCCOB6 Bit Fields */ +#define FTFA_FCCOB6_CCOBn_MASK 0xFFu +#define FTFA_FCCOB6_CCOBn_SHIFT 0 +#define FTFA_FCCOB6_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB6_CCOBn_SHIFT))&FTFA_FCCOB6_CCOBn_MASK) +/* FCCOB5 Bit Fields */ +#define FTFA_FCCOB5_CCOBn_MASK 0xFFu +#define FTFA_FCCOB5_CCOBn_SHIFT 0 +#define FTFA_FCCOB5_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB5_CCOBn_SHIFT))&FTFA_FCCOB5_CCOBn_MASK) +/* FCCOB4 Bit Fields */ +#define FTFA_FCCOB4_CCOBn_MASK 0xFFu +#define FTFA_FCCOB4_CCOBn_SHIFT 0 +#define FTFA_FCCOB4_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB4_CCOBn_SHIFT))&FTFA_FCCOB4_CCOBn_MASK) +/* FCCOBB Bit Fields */ +#define FTFA_FCCOBB_CCOBn_MASK 0xFFu +#define FTFA_FCCOBB_CCOBn_SHIFT 0 +#define FTFA_FCCOBB_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOBB_CCOBn_SHIFT))&FTFA_FCCOBB_CCOBn_MASK) +/* FCCOBA Bit Fields */ +#define FTFA_FCCOBA_CCOBn_MASK 0xFFu +#define FTFA_FCCOBA_CCOBn_SHIFT 0 +#define FTFA_FCCOBA_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOBA_CCOBn_SHIFT))&FTFA_FCCOBA_CCOBn_MASK) +/* FCCOB9 Bit Fields */ +#define FTFA_FCCOB9_CCOBn_MASK 0xFFu +#define FTFA_FCCOB9_CCOBn_SHIFT 0 +#define FTFA_FCCOB9_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB9_CCOBn_SHIFT))&FTFA_FCCOB9_CCOBn_MASK) +/* FCCOB8 Bit Fields */ +#define FTFA_FCCOB8_CCOBn_MASK 0xFFu +#define FTFA_FCCOB8_CCOBn_SHIFT 0 +#define FTFA_FCCOB8_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FCCOB8_CCOBn_SHIFT))&FTFA_FCCOB8_CCOBn_MASK) +/* FPROT3 Bit Fields */ +#define FTFA_FPROT3_PROT_MASK 0xFFu +#define FTFA_FPROT3_PROT_SHIFT 0 +#define FTFA_FPROT3_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FPROT3_PROT_SHIFT))&FTFA_FPROT3_PROT_MASK) +/* FPROT2 Bit Fields */ +#define FTFA_FPROT2_PROT_MASK 0xFFu +#define FTFA_FPROT2_PROT_SHIFT 0 +#define FTFA_FPROT2_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FPROT2_PROT_SHIFT))&FTFA_FPROT2_PROT_MASK) +/* FPROT1 Bit Fields */ +#define FTFA_FPROT1_PROT_MASK 0xFFu +#define FTFA_FPROT1_PROT_SHIFT 0 +#define FTFA_FPROT1_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FPROT1_PROT_SHIFT))&FTFA_FPROT1_PROT_MASK) +/* FPROT0 Bit Fields */ +#define FTFA_FPROT0_PROT_MASK 0xFFu +#define FTFA_FPROT0_PROT_SHIFT 0 +#define FTFA_FPROT0_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FPROT0_PROT_SHIFT))&FTFA_FPROT0_PROT_MASK) +/* XACCH3 Bit Fields */ +#define FTFA_XACCH3_XA_MASK 0xFFu +#define FTFA_XACCH3_XA_SHIFT 0 +#define FTFA_XACCH3_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCH3_XA_SHIFT))&FTFA_XACCH3_XA_MASK) +/* XACCH2 Bit Fields */ +#define FTFA_XACCH2_XA_MASK 0xFFu +#define FTFA_XACCH2_XA_SHIFT 0 +#define FTFA_XACCH2_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCH2_XA_SHIFT))&FTFA_XACCH2_XA_MASK) +/* XACCH1 Bit Fields */ +#define FTFA_XACCH1_XA_MASK 0xFFu +#define FTFA_XACCH1_XA_SHIFT 0 +#define FTFA_XACCH1_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCH1_XA_SHIFT))&FTFA_XACCH1_XA_MASK) +/* XACCH0 Bit Fields */ +#define FTFA_XACCH0_XA_MASK 0xFFu +#define FTFA_XACCH0_XA_SHIFT 0 +#define FTFA_XACCH0_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCH0_XA_SHIFT))&FTFA_XACCH0_XA_MASK) +/* XACCL3 Bit Fields */ +#define FTFA_XACCL3_XA_MASK 0xFFu +#define FTFA_XACCL3_XA_SHIFT 0 +#define FTFA_XACCL3_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCL3_XA_SHIFT))&FTFA_XACCL3_XA_MASK) +/* XACCL2 Bit Fields */ +#define FTFA_XACCL2_XA_MASK 0xFFu +#define FTFA_XACCL2_XA_SHIFT 0 +#define FTFA_XACCL2_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCL2_XA_SHIFT))&FTFA_XACCL2_XA_MASK) +/* XACCL1 Bit Fields */ +#define FTFA_XACCL1_XA_MASK 0xFFu +#define FTFA_XACCL1_XA_SHIFT 0 +#define FTFA_XACCL1_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCL1_XA_SHIFT))&FTFA_XACCL1_XA_MASK) +/* XACCL0 Bit Fields */ +#define FTFA_XACCL0_XA_MASK 0xFFu +#define FTFA_XACCL0_XA_SHIFT 0 +#define FTFA_XACCL0_XA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_XACCL0_XA_SHIFT))&FTFA_XACCL0_XA_MASK) +/* SACCH3 Bit Fields */ +#define FTFA_SACCH3_SA_MASK 0xFFu +#define FTFA_SACCH3_SA_SHIFT 0 +#define FTFA_SACCH3_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCH3_SA_SHIFT))&FTFA_SACCH3_SA_MASK) +/* SACCH2 Bit Fields */ +#define FTFA_SACCH2_SA_MASK 0xFFu +#define FTFA_SACCH2_SA_SHIFT 0 +#define FTFA_SACCH2_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCH2_SA_SHIFT))&FTFA_SACCH2_SA_MASK) +/* SACCH1 Bit Fields */ +#define FTFA_SACCH1_SA_MASK 0xFFu +#define FTFA_SACCH1_SA_SHIFT 0 +#define FTFA_SACCH1_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCH1_SA_SHIFT))&FTFA_SACCH1_SA_MASK) +/* SACCH0 Bit Fields */ +#define FTFA_SACCH0_SA_MASK 0xFFu +#define FTFA_SACCH0_SA_SHIFT 0 +#define FTFA_SACCH0_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCH0_SA_SHIFT))&FTFA_SACCH0_SA_MASK) +/* SACCL3 Bit Fields */ +#define FTFA_SACCL3_SA_MASK 0xFFu +#define FTFA_SACCL3_SA_SHIFT 0 +#define FTFA_SACCL3_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCL3_SA_SHIFT))&FTFA_SACCL3_SA_MASK) +/* SACCL2 Bit Fields */ +#define FTFA_SACCL2_SA_MASK 0xFFu +#define FTFA_SACCL2_SA_SHIFT 0 +#define FTFA_SACCL2_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCL2_SA_SHIFT))&FTFA_SACCL2_SA_MASK) +/* SACCL1 Bit Fields */ +#define FTFA_SACCL1_SA_MASK 0xFFu +#define FTFA_SACCL1_SA_SHIFT 0 +#define FTFA_SACCL1_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCL1_SA_SHIFT))&FTFA_SACCL1_SA_MASK) +/* SACCL0 Bit Fields */ +#define FTFA_SACCL0_SA_MASK 0xFFu +#define FTFA_SACCL0_SA_SHIFT 0 +#define FTFA_SACCL0_SA(x) (((uint8_t)(((uint8_t)(x))<<FTFA_SACCL0_SA_SHIFT))&FTFA_SACCL0_SA_MASK) +/* FACSS Bit Fields */ +#define FTFA_FACSS_SGSIZE_MASK 0xFFu +#define FTFA_FACSS_SGSIZE_SHIFT 0 +#define FTFA_FACSS_SGSIZE(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FACSS_SGSIZE_SHIFT))&FTFA_FACSS_SGSIZE_MASK) +/* FACSN Bit Fields */ +#define FTFA_FACSN_NUMSG_MASK 0xFFu +#define FTFA_FACSN_NUMSG_SHIFT 0 +#define FTFA_FACSN_NUMSG(x) (((uint8_t)(((uint8_t)(x))<<FTFA_FACSN_NUMSG_SHIFT))&FTFA_FACSN_NUMSG_MASK) + +/*! + * @} + */ /* end of group FTFA_Register_Masks */ + + +/* FTFA - Peripheral instance base addresses */ +/** Peripheral FTFA base address */ +#define FTFA_BASE (0x40020000u) +/** Peripheral FTFA base pointer */ +#define FTFA ((FTFA_Type *)FTFA_BASE) +#define FTFA_BASE_PTR (FTFA) +/** Array initializer of FTFA peripheral base addresses */ +#define FTFA_BASE_ADDRS { FTFA_BASE } +/** Array initializer of FTFA peripheral base pointers */ +#define FTFA_BASE_PTRS { FTFA } +/** Interrupt vectors for the FTFA peripheral type */ +#define FTFA_COMMAND_COMPLETE_IRQS { FTF_IRQn } +#define FTFA_READ_COLLISION_IRQS { Read_Collision_IRQn } + +/* ---------------------------------------------------------------------------- + -- FTFA - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTFA_Register_Accessor_Macros FTFA - Register accessor macros + * @{ + */ + + +/* FTFA - Register instance definitions */ +/* FTFA */ +#define FTFA_FSTAT FTFA_FSTAT_REG(FTFA) +#define FTFA_FCNFG FTFA_FCNFG_REG(FTFA) +#define FTFA_FSEC FTFA_FSEC_REG(FTFA) +#define FTFA_FOPT FTFA_FOPT_REG(FTFA) +#define FTFA_FCCOB3 FTFA_FCCOB3_REG(FTFA) +#define FTFA_FCCOB2 FTFA_FCCOB2_REG(FTFA) +#define FTFA_FCCOB1 FTFA_FCCOB1_REG(FTFA) +#define FTFA_FCCOB0 FTFA_FCCOB0_REG(FTFA) +#define FTFA_FCCOB7 FTFA_FCCOB7_REG(FTFA) +#define FTFA_FCCOB6 FTFA_FCCOB6_REG(FTFA) +#define FTFA_FCCOB5 FTFA_FCCOB5_REG(FTFA) +#define FTFA_FCCOB4 FTFA_FCCOB4_REG(FTFA) +#define FTFA_FCCOBB FTFA_FCCOBB_REG(FTFA) +#define FTFA_FCCOBA FTFA_FCCOBA_REG(FTFA) +#define FTFA_FCCOB9 FTFA_FCCOB9_REG(FTFA) +#define FTFA_FCCOB8 FTFA_FCCOB8_REG(FTFA) +#define FTFA_FPROT3 FTFA_FPROT3_REG(FTFA) +#define FTFA_FPROT2 FTFA_FPROT2_REG(FTFA) +#define FTFA_FPROT1 FTFA_FPROT1_REG(FTFA) +#define FTFA_FPROT0 FTFA_FPROT0_REG(FTFA) +#define FTFA_XACCH3 FTFA_XACCH3_REG(FTFA) +#define FTFA_XACCH2 FTFA_XACCH2_REG(FTFA) +#define FTFA_XACCH1 FTFA_XACCH1_REG(FTFA) +#define FTFA_XACCH0 FTFA_XACCH0_REG(FTFA) +#define FTFA_XACCL3 FTFA_XACCL3_REG(FTFA) +#define FTFA_XACCL2 FTFA_XACCL2_REG(FTFA) +#define FTFA_XACCL1 FTFA_XACCL1_REG(FTFA) +#define FTFA_XACCL0 FTFA_XACCL0_REG(FTFA) +#define FTFA_SACCH3 FTFA_SACCH3_REG(FTFA) +#define FTFA_SACCH2 FTFA_SACCH2_REG(FTFA) +#define FTFA_SACCH1 FTFA_SACCH1_REG(FTFA) +#define FTFA_SACCH0 FTFA_SACCH0_REG(FTFA) +#define FTFA_SACCL3 FTFA_SACCL3_REG(FTFA) +#define FTFA_SACCL2 FTFA_SACCL2_REG(FTFA) +#define FTFA_SACCL1 FTFA_SACCL1_REG(FTFA) +#define FTFA_SACCL0 FTFA_SACCL0_REG(FTFA) +#define FTFA_FACSS FTFA_FACSS_REG(FTFA) +#define FTFA_FACSN FTFA_FACSN_REG(FTFA) + +/*! + * @} + */ /* end of group FTFA_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group FTFA_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- FTM Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTM_Peripheral_Access_Layer FTM Peripheral Access Layer + * @{ + */ + +/** FTM - Register Layout Typedef */ +typedef struct { + __IO uint32_t SC; /**< Status And Control, offset: 0x0 */ + __IO uint32_t CNT; /**< Counter, offset: 0x4 */ + __IO uint32_t MOD; /**< Modulo, offset: 0x8 */ + struct { /* offset: 0xC, array step: 0x8 */ + __IO uint32_t CnSC; /**< Channel (n) Status And Control, array offset: 0xC, array step: 0x8 */ + __IO uint32_t CnV; /**< Channel (n) Value, array offset: 0x10, array step: 0x8 */ + } CONTROLS[8]; + __IO uint32_t CNTIN; /**< Counter Initial Value, offset: 0x4C */ + __IO uint32_t STATUS; /**< Capture And Compare Status, offset: 0x50 */ + __IO uint32_t MODE; /**< Features Mode Selection, offset: 0x54 */ + __IO uint32_t SYNC; /**< Synchronization, offset: 0x58 */ + __IO uint32_t OUTINIT; /**< Initial State For Channels Output, offset: 0x5C */ + __IO uint32_t OUTMASK; /**< Output Mask, offset: 0x60 */ + __IO uint32_t COMBINE; /**< Function For Linked Channels, offset: 0x64 */ + __IO uint32_t DEADTIME; /**< Deadtime Insertion Control, offset: 0x68 */ + __IO uint32_t EXTTRIG; /**< FTM External Trigger, offset: 0x6C */ + __IO uint32_t POL; /**< Channels Polarity, offset: 0x70 */ + __IO uint32_t FMS; /**< Fault Mode Status, offset: 0x74 */ + __IO uint32_t FILTER; /**< Input Capture Filter Control, offset: 0x78 */ + __IO uint32_t FLTCTRL; /**< Fault Control, offset: 0x7C */ + __IO uint32_t QDCTRL; /**< Quadrature Decoder Control And Status, offset: 0x80 */ + __IO uint32_t CONF; /**< Configuration, offset: 0x84 */ + __IO uint32_t FLTPOL; /**< FTM Fault Input Polarity, offset: 0x88 */ + __IO uint32_t SYNCONF; /**< Synchronization Configuration, offset: 0x8C */ + __IO uint32_t INVCTRL; /**< FTM Inverting Control, offset: 0x90 */ + __IO uint32_t SWOCTRL; /**< FTM Software Output Control, offset: 0x94 */ + __IO uint32_t PWMLOAD; /**< FTM PWM Load, offset: 0x98 */ +} FTM_Type, *FTM_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- FTM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTM_Register_Accessor_Macros FTM - Register accessor macros + * @{ + */ + + +/* FTM - Register accessors */ +#define FTM_SC_REG(base) ((base)->SC) +#define FTM_CNT_REG(base) ((base)->CNT) +#define FTM_MOD_REG(base) ((base)->MOD) +#define FTM_CnSC_REG(base,index) ((base)->CONTROLS[index].CnSC) +#define FTM_CnV_REG(base,index) ((base)->CONTROLS[index].CnV) +#define FTM_CNTIN_REG(base) ((base)->CNTIN) +#define FTM_STATUS_REG(base) ((base)->STATUS) +#define FTM_MODE_REG(base) ((base)->MODE) +#define FTM_SYNC_REG(base) ((base)->SYNC) +#define FTM_OUTINIT_REG(base) ((base)->OUTINIT) +#define FTM_OUTMASK_REG(base) ((base)->OUTMASK) +#define FTM_COMBINE_REG(base) ((base)->COMBINE) +#define FTM_DEADTIME_REG(base) ((base)->DEADTIME) +#define FTM_EXTTRIG_REG(base) ((base)->EXTTRIG) +#define FTM_POL_REG(base) ((base)->POL) +#define FTM_FMS_REG(base) ((base)->FMS) +#define FTM_FILTER_REG(base) ((base)->FILTER) +#define FTM_FLTCTRL_REG(base) ((base)->FLTCTRL) +#define FTM_QDCTRL_REG(base) ((base)->QDCTRL) +#define FTM_CONF_REG(base) ((base)->CONF) +#define FTM_FLTPOL_REG(base) ((base)->FLTPOL) +#define FTM_SYNCONF_REG(base) ((base)->SYNCONF) +#define FTM_INVCTRL_REG(base) ((base)->INVCTRL) +#define FTM_SWOCTRL_REG(base) ((base)->SWOCTRL) +#define FTM_PWMLOAD_REG(base) ((base)->PWMLOAD) + +/*! + * @} + */ /* end of group FTM_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- FTM Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTM_Register_Masks FTM Register Masks + * @{ + */ + +/* SC Bit Fields */ +#define FTM_SC_PS_MASK 0x7u +#define FTM_SC_PS_SHIFT 0 +#define FTM_SC_PS(x) (((uint32_t)(((uint32_t)(x))<<FTM_SC_PS_SHIFT))&FTM_SC_PS_MASK) +#define FTM_SC_CLKS_MASK 0x18u +#define FTM_SC_CLKS_SHIFT 3 +#define FTM_SC_CLKS(x) (((uint32_t)(((uint32_t)(x))<<FTM_SC_CLKS_SHIFT))&FTM_SC_CLKS_MASK) +#define FTM_SC_CPWMS_MASK 0x20u +#define FTM_SC_CPWMS_SHIFT 5 +#define FTM_SC_TOIE_MASK 0x40u +#define FTM_SC_TOIE_SHIFT 6 +#define FTM_SC_TOF_MASK 0x80u +#define FTM_SC_TOF_SHIFT 7 +/* CNT Bit Fields */ +#define FTM_CNT_COUNT_MASK 0xFFFFu +#define FTM_CNT_COUNT_SHIFT 0 +#define FTM_CNT_COUNT(x) (((uint32_t)(((uint32_t)(x))<<FTM_CNT_COUNT_SHIFT))&FTM_CNT_COUNT_MASK) +/* MOD Bit Fields */ +#define FTM_MOD_MOD_MASK 0xFFFFu +#define FTM_MOD_MOD_SHIFT 0 +#define FTM_MOD_MOD(x) (((uint32_t)(((uint32_t)(x))<<FTM_MOD_MOD_SHIFT))&FTM_MOD_MOD_MASK) +/* CnSC Bit Fields */ +#define FTM_CnSC_DMA_MASK 0x1u +#define FTM_CnSC_DMA_SHIFT 0 +#define FTM_CnSC_ICRST_MASK 0x2u +#define FTM_CnSC_ICRST_SHIFT 1 +#define FTM_CnSC_ELSA_MASK 0x4u +#define FTM_CnSC_ELSA_SHIFT 2 +#define FTM_CnSC_ELSB_MASK 0x8u +#define FTM_CnSC_ELSB_SHIFT 3 +#define FTM_CnSC_MSA_MASK 0x10u +#define FTM_CnSC_MSA_SHIFT 4 +#define FTM_CnSC_MSB_MASK 0x20u +#define FTM_CnSC_MSB_SHIFT 5 +#define FTM_CnSC_CHIE_MASK 0x40u +#define FTM_CnSC_CHIE_SHIFT 6 +#define FTM_CnSC_CHF_MASK 0x80u +#define FTM_CnSC_CHF_SHIFT 7 +/* CnV Bit Fields */ +#define FTM_CnV_VAL_MASK 0xFFFFu +#define FTM_CnV_VAL_SHIFT 0 +#define FTM_CnV_VAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_CnV_VAL_SHIFT))&FTM_CnV_VAL_MASK) +/* CNTIN Bit Fields */ +#define FTM_CNTIN_INIT_MASK 0xFFFFu +#define FTM_CNTIN_INIT_SHIFT 0 +#define FTM_CNTIN_INIT(x) (((uint32_t)(((uint32_t)(x))<<FTM_CNTIN_INIT_SHIFT))&FTM_CNTIN_INIT_MASK) +/* STATUS Bit Fields */ +#define FTM_STATUS_CH0F_MASK 0x1u +#define FTM_STATUS_CH0F_SHIFT 0 +#define FTM_STATUS_CH1F_MASK 0x2u +#define FTM_STATUS_CH1F_SHIFT 1 +#define FTM_STATUS_CH2F_MASK 0x4u +#define FTM_STATUS_CH2F_SHIFT 2 +#define FTM_STATUS_CH3F_MASK 0x8u +#define FTM_STATUS_CH3F_SHIFT 3 +#define FTM_STATUS_CH4F_MASK 0x10u +#define FTM_STATUS_CH4F_SHIFT 4 +#define FTM_STATUS_CH5F_MASK 0x20u +#define FTM_STATUS_CH5F_SHIFT 5 +#define FTM_STATUS_CH6F_MASK 0x40u +#define FTM_STATUS_CH6F_SHIFT 6 +#define FTM_STATUS_CH7F_MASK 0x80u +#define FTM_STATUS_CH7F_SHIFT 7 +/* MODE Bit Fields */ +#define FTM_MODE_FTMEN_MASK 0x1u +#define FTM_MODE_FTMEN_SHIFT 0 +#define FTM_MODE_INIT_MASK 0x2u +#define FTM_MODE_INIT_SHIFT 1 +#define FTM_MODE_WPDIS_MASK 0x4u +#define FTM_MODE_WPDIS_SHIFT 2 +#define FTM_MODE_PWMSYNC_MASK 0x8u +#define FTM_MODE_PWMSYNC_SHIFT 3 +#define FTM_MODE_CAPTEST_MASK 0x10u +#define FTM_MODE_CAPTEST_SHIFT 4 +#define FTM_MODE_FAULTM_MASK 0x60u +#define FTM_MODE_FAULTM_SHIFT 5 +#define FTM_MODE_FAULTM(x) (((uint32_t)(((uint32_t)(x))<<FTM_MODE_FAULTM_SHIFT))&FTM_MODE_FAULTM_MASK) +#define FTM_MODE_FAULTIE_MASK 0x80u +#define FTM_MODE_FAULTIE_SHIFT 7 +/* SYNC Bit Fields */ +#define FTM_SYNC_CNTMIN_MASK 0x1u +#define FTM_SYNC_CNTMIN_SHIFT 0 +#define FTM_SYNC_CNTMAX_MASK 0x2u +#define FTM_SYNC_CNTMAX_SHIFT 1 +#define FTM_SYNC_REINIT_MASK 0x4u +#define FTM_SYNC_REINIT_SHIFT 2 +#define FTM_SYNC_SYNCHOM_MASK 0x8u +#define FTM_SYNC_SYNCHOM_SHIFT 3 +#define FTM_SYNC_TRIG0_MASK 0x10u +#define FTM_SYNC_TRIG0_SHIFT 4 +#define FTM_SYNC_TRIG1_MASK 0x20u +#define FTM_SYNC_TRIG1_SHIFT 5 +#define FTM_SYNC_TRIG2_MASK 0x40u +#define FTM_SYNC_TRIG2_SHIFT 6 +#define FTM_SYNC_SWSYNC_MASK 0x80u +#define FTM_SYNC_SWSYNC_SHIFT 7 +/* OUTINIT Bit Fields */ +#define FTM_OUTINIT_CH0OI_MASK 0x1u +#define FTM_OUTINIT_CH0OI_SHIFT 0 +#define FTM_OUTINIT_CH1OI_MASK 0x2u +#define FTM_OUTINIT_CH1OI_SHIFT 1 +#define FTM_OUTINIT_CH2OI_MASK 0x4u +#define FTM_OUTINIT_CH2OI_SHIFT 2 +#define FTM_OUTINIT_CH3OI_MASK 0x8u +#define FTM_OUTINIT_CH3OI_SHIFT 3 +#define FTM_OUTINIT_CH4OI_MASK 0x10u +#define FTM_OUTINIT_CH4OI_SHIFT 4 +#define FTM_OUTINIT_CH5OI_MASK 0x20u +#define FTM_OUTINIT_CH5OI_SHIFT 5 +#define FTM_OUTINIT_CH6OI_MASK 0x40u +#define FTM_OUTINIT_CH6OI_SHIFT 6 +#define FTM_OUTINIT_CH7OI_MASK 0x80u +#define FTM_OUTINIT_CH7OI_SHIFT 7 +/* OUTMASK Bit Fields */ +#define FTM_OUTMASK_CH0OM_MASK 0x1u +#define FTM_OUTMASK_CH0OM_SHIFT 0 +#define FTM_OUTMASK_CH1OM_MASK 0x2u +#define FTM_OUTMASK_CH1OM_SHIFT 1 +#define FTM_OUTMASK_CH2OM_MASK 0x4u +#define FTM_OUTMASK_CH2OM_SHIFT 2 +#define FTM_OUTMASK_CH3OM_MASK 0x8u +#define FTM_OUTMASK_CH3OM_SHIFT 3 +#define FTM_OUTMASK_CH4OM_MASK 0x10u +#define FTM_OUTMASK_CH4OM_SHIFT 4 +#define FTM_OUTMASK_CH5OM_MASK 0x20u +#define FTM_OUTMASK_CH5OM_SHIFT 5 +#define FTM_OUTMASK_CH6OM_MASK 0x40u +#define FTM_OUTMASK_CH6OM_SHIFT 6 +#define FTM_OUTMASK_CH7OM_MASK 0x80u +#define FTM_OUTMASK_CH7OM_SHIFT 7 +/* COMBINE Bit Fields */ +#define FTM_COMBINE_COMBINE0_MASK 0x1u +#define FTM_COMBINE_COMBINE0_SHIFT 0 +#define FTM_COMBINE_COMP0_MASK 0x2u +#define FTM_COMBINE_COMP0_SHIFT 1 +#define FTM_COMBINE_DECAPEN0_MASK 0x4u +#define FTM_COMBINE_DECAPEN0_SHIFT 2 +#define FTM_COMBINE_DECAP0_MASK 0x8u +#define FTM_COMBINE_DECAP0_SHIFT 3 +#define FTM_COMBINE_DTEN0_MASK 0x10u +#define FTM_COMBINE_DTEN0_SHIFT 4 +#define FTM_COMBINE_SYNCEN0_MASK 0x20u +#define FTM_COMBINE_SYNCEN0_SHIFT 5 +#define FTM_COMBINE_FAULTEN0_MASK 0x40u +#define FTM_COMBINE_FAULTEN0_SHIFT 6 +#define FTM_COMBINE_COMBINE1_MASK 0x100u +#define FTM_COMBINE_COMBINE1_SHIFT 8 +#define FTM_COMBINE_COMP1_MASK 0x200u +#define FTM_COMBINE_COMP1_SHIFT 9 +#define FTM_COMBINE_DECAPEN1_MASK 0x400u +#define FTM_COMBINE_DECAPEN1_SHIFT 10 +#define FTM_COMBINE_DECAP1_MASK 0x800u +#define FTM_COMBINE_DECAP1_SHIFT 11 +#define FTM_COMBINE_DTEN1_MASK 0x1000u +#define FTM_COMBINE_DTEN1_SHIFT 12 +#define FTM_COMBINE_SYNCEN1_MASK 0x2000u +#define FTM_COMBINE_SYNCEN1_SHIFT 13 +#define FTM_COMBINE_FAULTEN1_MASK 0x4000u +#define FTM_COMBINE_FAULTEN1_SHIFT 14 +#define FTM_COMBINE_COMBINE2_MASK 0x10000u +#define FTM_COMBINE_COMBINE2_SHIFT 16 +#define FTM_COMBINE_COMP2_MASK 0x20000u +#define FTM_COMBINE_COMP2_SHIFT 17 +#define FTM_COMBINE_DECAPEN2_MASK 0x40000u +#define FTM_COMBINE_DECAPEN2_SHIFT 18 +#define FTM_COMBINE_DECAP2_MASK 0x80000u +#define FTM_COMBINE_DECAP2_SHIFT 19 +#define FTM_COMBINE_DTEN2_MASK 0x100000u +#define FTM_COMBINE_DTEN2_SHIFT 20 +#define FTM_COMBINE_SYNCEN2_MASK 0x200000u +#define FTM_COMBINE_SYNCEN2_SHIFT 21 +#define FTM_COMBINE_FAULTEN2_MASK 0x400000u +#define FTM_COMBINE_FAULTEN2_SHIFT 22 +#define FTM_COMBINE_COMBINE3_MASK 0x1000000u +#define FTM_COMBINE_COMBINE3_SHIFT 24 +#define FTM_COMBINE_COMP3_MASK 0x2000000u +#define FTM_COMBINE_COMP3_SHIFT 25 +#define FTM_COMBINE_DECAPEN3_MASK 0x4000000u +#define FTM_COMBINE_DECAPEN3_SHIFT 26 +#define FTM_COMBINE_DECAP3_MASK 0x8000000u +#define FTM_COMBINE_DECAP3_SHIFT 27 +#define FTM_COMBINE_DTEN3_MASK 0x10000000u +#define FTM_COMBINE_DTEN3_SHIFT 28 +#define FTM_COMBINE_SYNCEN3_MASK 0x20000000u +#define FTM_COMBINE_SYNCEN3_SHIFT 29 +#define FTM_COMBINE_FAULTEN3_MASK 0x40000000u +#define FTM_COMBINE_FAULTEN3_SHIFT 30 +/* DEADTIME Bit Fields */ +#define FTM_DEADTIME_DTVAL_MASK 0x3Fu +#define FTM_DEADTIME_DTVAL_SHIFT 0 +#define FTM_DEADTIME_DTVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_DEADTIME_DTVAL_SHIFT))&FTM_DEADTIME_DTVAL_MASK) +#define FTM_DEADTIME_DTPS_MASK 0xC0u +#define FTM_DEADTIME_DTPS_SHIFT 6 +#define FTM_DEADTIME_DTPS(x) (((uint32_t)(((uint32_t)(x))<<FTM_DEADTIME_DTPS_SHIFT))&FTM_DEADTIME_DTPS_MASK) +/* EXTTRIG Bit Fields */ +#define FTM_EXTTRIG_CH2TRIG_MASK 0x1u +#define FTM_EXTTRIG_CH2TRIG_SHIFT 0 +#define FTM_EXTTRIG_CH3TRIG_MASK 0x2u +#define FTM_EXTTRIG_CH3TRIG_SHIFT 1 +#define FTM_EXTTRIG_CH4TRIG_MASK 0x4u +#define FTM_EXTTRIG_CH4TRIG_SHIFT 2 +#define FTM_EXTTRIG_CH5TRIG_MASK 0x8u +#define FTM_EXTTRIG_CH5TRIG_SHIFT 3 +#define FTM_EXTTRIG_CH0TRIG_MASK 0x10u +#define FTM_EXTTRIG_CH0TRIG_SHIFT 4 +#define FTM_EXTTRIG_CH1TRIG_MASK 0x20u +#define FTM_EXTTRIG_CH1TRIG_SHIFT 5 +#define FTM_EXTTRIG_INITTRIGEN_MASK 0x40u +#define FTM_EXTTRIG_INITTRIGEN_SHIFT 6 +#define FTM_EXTTRIG_TRIGF_MASK 0x80u +#define FTM_EXTTRIG_TRIGF_SHIFT 7 +/* POL Bit Fields */ +#define FTM_POL_POL0_MASK 0x1u +#define FTM_POL_POL0_SHIFT 0 +#define FTM_POL_POL1_MASK 0x2u +#define FTM_POL_POL1_SHIFT 1 +#define FTM_POL_POL2_MASK 0x4u +#define FTM_POL_POL2_SHIFT 2 +#define FTM_POL_POL3_MASK 0x8u +#define FTM_POL_POL3_SHIFT 3 +#define FTM_POL_POL4_MASK 0x10u +#define FTM_POL_POL4_SHIFT 4 +#define FTM_POL_POL5_MASK 0x20u +#define FTM_POL_POL5_SHIFT 5 +#define FTM_POL_POL6_MASK 0x40u +#define FTM_POL_POL6_SHIFT 6 +#define FTM_POL_POL7_MASK 0x80u +#define FTM_POL_POL7_SHIFT 7 +/* FMS Bit Fields */ +#define FTM_FMS_FAULTF0_MASK 0x1u +#define FTM_FMS_FAULTF0_SHIFT 0 +#define FTM_FMS_FAULTF1_MASK 0x2u +#define FTM_FMS_FAULTF1_SHIFT 1 +#define FTM_FMS_FAULTF2_MASK 0x4u +#define FTM_FMS_FAULTF2_SHIFT 2 +#define FTM_FMS_FAULTF3_MASK 0x8u +#define FTM_FMS_FAULTF3_SHIFT 3 +#define FTM_FMS_FAULTIN_MASK 0x20u +#define FTM_FMS_FAULTIN_SHIFT 5 +#define FTM_FMS_WPEN_MASK 0x40u +#define FTM_FMS_WPEN_SHIFT 6 +#define FTM_FMS_FAULTF_MASK 0x80u +#define FTM_FMS_FAULTF_SHIFT 7 +/* FILTER Bit Fields */ +#define FTM_FILTER_CH0FVAL_MASK 0xFu +#define FTM_FILTER_CH0FVAL_SHIFT 0 +#define FTM_FILTER_CH0FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH0FVAL_SHIFT))&FTM_FILTER_CH0FVAL_MASK) +#define FTM_FILTER_CH1FVAL_MASK 0xF0u +#define FTM_FILTER_CH1FVAL_SHIFT 4 +#define FTM_FILTER_CH1FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH1FVAL_SHIFT))&FTM_FILTER_CH1FVAL_MASK) +#define FTM_FILTER_CH2FVAL_MASK 0xF00u +#define FTM_FILTER_CH2FVAL_SHIFT 8 +#define FTM_FILTER_CH2FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH2FVAL_SHIFT))&FTM_FILTER_CH2FVAL_MASK) +#define FTM_FILTER_CH3FVAL_MASK 0xF000u +#define FTM_FILTER_CH3FVAL_SHIFT 12 +#define FTM_FILTER_CH3FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH3FVAL_SHIFT))&FTM_FILTER_CH3FVAL_MASK) +/* FLTCTRL Bit Fields */ +#define FTM_FLTCTRL_FAULT0EN_MASK 0x1u +#define FTM_FLTCTRL_FAULT0EN_SHIFT 0 +#define FTM_FLTCTRL_FAULT1EN_MASK 0x2u +#define FTM_FLTCTRL_FAULT1EN_SHIFT 1 +#define FTM_FLTCTRL_FAULT2EN_MASK 0x4u +#define FTM_FLTCTRL_FAULT2EN_SHIFT 2 +#define FTM_FLTCTRL_FAULT3EN_MASK 0x8u +#define FTM_FLTCTRL_FAULT3EN_SHIFT 3 +#define FTM_FLTCTRL_FFLTR0EN_MASK 0x10u +#define FTM_FLTCTRL_FFLTR0EN_SHIFT 4 +#define FTM_FLTCTRL_FFLTR1EN_MASK 0x20u +#define FTM_FLTCTRL_FFLTR1EN_SHIFT 5 +#define FTM_FLTCTRL_FFLTR2EN_MASK 0x40u +#define FTM_FLTCTRL_FFLTR2EN_SHIFT 6 +#define FTM_FLTCTRL_FFLTR3EN_MASK 0x80u +#define FTM_FLTCTRL_FFLTR3EN_SHIFT 7 +#define FTM_FLTCTRL_FFVAL_MASK 0xF00u +#define FTM_FLTCTRL_FFVAL_SHIFT 8 +#define FTM_FLTCTRL_FFVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FLTCTRL_FFVAL_SHIFT))&FTM_FLTCTRL_FFVAL_MASK) +/* QDCTRL Bit Fields */ +#define FTM_QDCTRL_QUADEN_MASK 0x1u +#define FTM_QDCTRL_QUADEN_SHIFT 0 +#define FTM_QDCTRL_TOFDIR_MASK 0x2u +#define FTM_QDCTRL_TOFDIR_SHIFT 1 +#define FTM_QDCTRL_QUADIR_MASK 0x4u +#define FTM_QDCTRL_QUADIR_SHIFT 2 +#define FTM_QDCTRL_QUADMODE_MASK 0x8u +#define FTM_QDCTRL_QUADMODE_SHIFT 3 +#define FTM_QDCTRL_PHBPOL_MASK 0x10u +#define FTM_QDCTRL_PHBPOL_SHIFT 4 +#define FTM_QDCTRL_PHAPOL_MASK 0x20u +#define FTM_QDCTRL_PHAPOL_SHIFT 5 +#define FTM_QDCTRL_PHBFLTREN_MASK 0x40u +#define FTM_QDCTRL_PHBFLTREN_SHIFT 6 +#define FTM_QDCTRL_PHAFLTREN_MASK 0x80u +#define FTM_QDCTRL_PHAFLTREN_SHIFT 7 +/* CONF Bit Fields */ +#define FTM_CONF_NUMTOF_MASK 0x1Fu +#define FTM_CONF_NUMTOF_SHIFT 0 +#define FTM_CONF_NUMTOF(x) (((uint32_t)(((uint32_t)(x))<<FTM_CONF_NUMTOF_SHIFT))&FTM_CONF_NUMTOF_MASK) +#define FTM_CONF_BDMMODE_MASK 0xC0u +#define FTM_CONF_BDMMODE_SHIFT 6 +#define FTM_CONF_BDMMODE(x) (((uint32_t)(((uint32_t)(x))<<FTM_CONF_BDMMODE_SHIFT))&FTM_CONF_BDMMODE_MASK) +#define FTM_CONF_GTBEEN_MASK 0x200u +#define FTM_CONF_GTBEEN_SHIFT 9 +#define FTM_CONF_GTBEOUT_MASK 0x400u +#define FTM_CONF_GTBEOUT_SHIFT 10 +/* FLTPOL Bit Fields */ +#define FTM_FLTPOL_FLT0POL_MASK 0x1u +#define FTM_FLTPOL_FLT0POL_SHIFT 0 +#define FTM_FLTPOL_FLT1POL_MASK 0x2u +#define FTM_FLTPOL_FLT1POL_SHIFT 1 +#define FTM_FLTPOL_FLT2POL_MASK 0x4u +#define FTM_FLTPOL_FLT2POL_SHIFT 2 +#define FTM_FLTPOL_FLT3POL_MASK 0x8u +#define FTM_FLTPOL_FLT3POL_SHIFT 3 +/* SYNCONF Bit Fields */ +#define FTM_SYNCONF_HWTRIGMODE_MASK 0x1u +#define FTM_SYNCONF_HWTRIGMODE_SHIFT 0 +#define FTM_SYNCONF_CNTINC_MASK 0x4u +#define FTM_SYNCONF_CNTINC_SHIFT 2 +#define FTM_SYNCONF_INVC_MASK 0x10u +#define FTM_SYNCONF_INVC_SHIFT 4 +#define FTM_SYNCONF_SWOC_MASK 0x20u +#define FTM_SYNCONF_SWOC_SHIFT 5 +#define FTM_SYNCONF_SYNCMODE_MASK 0x80u +#define FTM_SYNCONF_SYNCMODE_SHIFT 7 +#define FTM_SYNCONF_SWRSTCNT_MASK 0x100u +#define FTM_SYNCONF_SWRSTCNT_SHIFT 8 +#define FTM_SYNCONF_SWWRBUF_MASK 0x200u +#define FTM_SYNCONF_SWWRBUF_SHIFT 9 +#define FTM_SYNCONF_SWOM_MASK 0x400u +#define FTM_SYNCONF_SWOM_SHIFT 10 +#define FTM_SYNCONF_SWINVC_MASK 0x800u +#define FTM_SYNCONF_SWINVC_SHIFT 11 +#define FTM_SYNCONF_SWSOC_MASK 0x1000u +#define FTM_SYNCONF_SWSOC_SHIFT 12 +#define FTM_SYNCONF_HWRSTCNT_MASK 0x10000u +#define FTM_SYNCONF_HWRSTCNT_SHIFT 16 +#define FTM_SYNCONF_HWWRBUF_MASK 0x20000u +#define FTM_SYNCONF_HWWRBUF_SHIFT 17 +#define FTM_SYNCONF_HWOM_MASK 0x40000u +#define FTM_SYNCONF_HWOM_SHIFT 18 +#define FTM_SYNCONF_HWINVC_MASK 0x80000u +#define FTM_SYNCONF_HWINVC_SHIFT 19 +#define FTM_SYNCONF_HWSOC_MASK 0x100000u +#define FTM_SYNCONF_HWSOC_SHIFT 20 +/* INVCTRL Bit Fields */ +#define FTM_INVCTRL_INV0EN_MASK 0x1u +#define FTM_INVCTRL_INV0EN_SHIFT 0 +#define FTM_INVCTRL_INV1EN_MASK 0x2u +#define FTM_INVCTRL_INV1EN_SHIFT 1 +#define FTM_INVCTRL_INV2EN_MASK 0x4u +#define FTM_INVCTRL_INV2EN_SHIFT 2 +#define FTM_INVCTRL_INV3EN_MASK 0x8u +#define FTM_INVCTRL_INV3EN_SHIFT 3 +/* SWOCTRL Bit Fields */ +#define FTM_SWOCTRL_CH0OC_MASK 0x1u +#define FTM_SWOCTRL_CH0OC_SHIFT 0 +#define FTM_SWOCTRL_CH1OC_MASK 0x2u +#define FTM_SWOCTRL_CH1OC_SHIFT 1 +#define FTM_SWOCTRL_CH2OC_MASK 0x4u +#define FTM_SWOCTRL_CH2OC_SHIFT 2 +#define FTM_SWOCTRL_CH3OC_MASK 0x8u +#define FTM_SWOCTRL_CH3OC_SHIFT 3 +#define FTM_SWOCTRL_CH4OC_MASK 0x10u +#define FTM_SWOCTRL_CH4OC_SHIFT 4 +#define FTM_SWOCTRL_CH5OC_MASK 0x20u +#define FTM_SWOCTRL_CH5OC_SHIFT 5 +#define FTM_SWOCTRL_CH6OC_MASK 0x40u +#define FTM_SWOCTRL_CH6OC_SHIFT 6 +#define FTM_SWOCTRL_CH7OC_MASK 0x80u +#define FTM_SWOCTRL_CH7OC_SHIFT 7 +#define FTM_SWOCTRL_CH0OCV_MASK 0x100u +#define FTM_SWOCTRL_CH0OCV_SHIFT 8 +#define FTM_SWOCTRL_CH1OCV_MASK 0x200u +#define FTM_SWOCTRL_CH1OCV_SHIFT 9 +#define FTM_SWOCTRL_CH2OCV_MASK 0x400u +#define FTM_SWOCTRL_CH2OCV_SHIFT 10 +#define FTM_SWOCTRL_CH3OCV_MASK 0x800u +#define FTM_SWOCTRL_CH3OCV_SHIFT 11 +#define FTM_SWOCTRL_CH4OCV_MASK 0x1000u +#define FTM_SWOCTRL_CH4OCV_SHIFT 12 +#define FTM_SWOCTRL_CH5OCV_MASK 0x2000u +#define FTM_SWOCTRL_CH5OCV_SHIFT 13 +#define FTM_SWOCTRL_CH6OCV_MASK 0x4000u +#define FTM_SWOCTRL_CH6OCV_SHIFT 14 +#define FTM_SWOCTRL_CH7OCV_MASK 0x8000u +#define FTM_SWOCTRL_CH7OCV_SHIFT 15 +/* PWMLOAD Bit Fields */ +#define FTM_PWMLOAD_CH0SEL_MASK 0x1u +#define FTM_PWMLOAD_CH0SEL_SHIFT 0 +#define FTM_PWMLOAD_CH1SEL_MASK 0x2u +#define FTM_PWMLOAD_CH1SEL_SHIFT 1 +#define FTM_PWMLOAD_CH2SEL_MASK 0x4u +#define FTM_PWMLOAD_CH2SEL_SHIFT 2 +#define FTM_PWMLOAD_CH3SEL_MASK 0x8u +#define FTM_PWMLOAD_CH3SEL_SHIFT 3 +#define FTM_PWMLOAD_CH4SEL_MASK 0x10u +#define FTM_PWMLOAD_CH4SEL_SHIFT 4 +#define FTM_PWMLOAD_CH5SEL_MASK 0x20u +#define FTM_PWMLOAD_CH5SEL_SHIFT 5 +#define FTM_PWMLOAD_CH6SEL_MASK 0x40u +#define FTM_PWMLOAD_CH6SEL_SHIFT 6 +#define FTM_PWMLOAD_CH7SEL_MASK 0x80u +#define FTM_PWMLOAD_CH7SEL_SHIFT 7 +#define FTM_PWMLOAD_LDOK_MASK 0x200u +#define FTM_PWMLOAD_LDOK_SHIFT 9 + +/*! + * @} + */ /* end of group FTM_Register_Masks */ + + +/* FTM - Peripheral instance base addresses */ +/** Peripheral FTM0 base address */ +#define FTM0_BASE (0x40038000u) +/** Peripheral FTM0 base pointer */ +#define FTM0 ((FTM_Type *)FTM0_BASE) +#define FTM0_BASE_PTR (FTM0) +/** Peripheral FTM1 base address */ +#define FTM1_BASE (0x40039000u) +/** Peripheral FTM1 base pointer */ +#define FTM1 ((FTM_Type *)FTM1_BASE) +#define FTM1_BASE_PTR (FTM1) +/** Peripheral FTM2 base address */ +#define FTM2_BASE (0x4003A000u) +/** Peripheral FTM2 base pointer */ +#define FTM2 ((FTM_Type *)FTM2_BASE) +#define FTM2_BASE_PTR (FTM2) +/** Peripheral FTM3 base address */ +#define FTM3_BASE (0x40026000u) +/** Peripheral FTM3 base pointer */ +#define FTM3 ((FTM_Type *)FTM3_BASE) +#define FTM3_BASE_PTR (FTM3) +/** Array initializer of FTM peripheral base addresses */ +#define FTM_BASE_ADDRS { FTM0_BASE, FTM1_BASE, FTM2_BASE, FTM3_BASE } +/** Array initializer of FTM peripheral base pointers */ +#define FTM_BASE_PTRS { FTM0, FTM1, FTM2, FTM3 } +/** Interrupt vectors for the FTM peripheral type */ +#define FTM_IRQS { FTM0_IRQn, FTM1_IRQn, FTM2_IRQn, FTM3_IRQn } + +/* ---------------------------------------------------------------------------- + -- FTM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup FTM_Register_Accessor_Macros FTM - Register accessor macros + * @{ + */ + + +/* FTM - Register instance definitions */ +/* FTM0 */ +#define FTM0_SC FTM_SC_REG(FTM0) +#define FTM0_CNT FTM_CNT_REG(FTM0) +#define FTM0_MOD FTM_MOD_REG(FTM0) +#define FTM0_C0SC FTM_CnSC_REG(FTM0,0) +#define FTM0_C0V FTM_CnV_REG(FTM0,0) +#define FTM0_C1SC FTM_CnSC_REG(FTM0,1) +#define FTM0_C1V FTM_CnV_REG(FTM0,1) +#define FTM0_C2SC FTM_CnSC_REG(FTM0,2) +#define FTM0_C2V FTM_CnV_REG(FTM0,2) +#define FTM0_C3SC FTM_CnSC_REG(FTM0,3) +#define FTM0_C3V FTM_CnV_REG(FTM0,3) +#define FTM0_C4SC FTM_CnSC_REG(FTM0,4) +#define FTM0_C4V FTM_CnV_REG(FTM0,4) +#define FTM0_C5SC FTM_CnSC_REG(FTM0,5) +#define FTM0_C5V FTM_CnV_REG(FTM0,5) +#define FTM0_C6SC FTM_CnSC_REG(FTM0,6) +#define FTM0_C6V FTM_CnV_REG(FTM0,6) +#define FTM0_C7SC FTM_CnSC_REG(FTM0,7) +#define FTM0_C7V FTM_CnV_REG(FTM0,7) +#define FTM0_CNTIN FTM_CNTIN_REG(FTM0) +#define FTM0_STATUS FTM_STATUS_REG(FTM0) +#define FTM0_MODE FTM_MODE_REG(FTM0) +#define FTM0_SYNC FTM_SYNC_REG(FTM0) +#define FTM0_OUTINIT FTM_OUTINIT_REG(FTM0) +#define FTM0_OUTMASK FTM_OUTMASK_REG(FTM0) +#define FTM0_COMBINE FTM_COMBINE_REG(FTM0) +#define FTM0_DEADTIME FTM_DEADTIME_REG(FTM0) +#define FTM0_EXTTRIG FTM_EXTTRIG_REG(FTM0) +#define FTM0_POL FTM_POL_REG(FTM0) +#define FTM0_FMS FTM_FMS_REG(FTM0) +#define FTM0_FILTER FTM_FILTER_REG(FTM0) +#define FTM0_FLTCTRL FTM_FLTCTRL_REG(FTM0) +#define FTM0_QDCTRL FTM_QDCTRL_REG(FTM0) +#define FTM0_CONF FTM_CONF_REG(FTM0) +#define FTM0_FLTPOL FTM_FLTPOL_REG(FTM0) +#define FTM0_SYNCONF FTM_SYNCONF_REG(FTM0) +#define FTM0_INVCTRL FTM_INVCTRL_REG(FTM0) +#define FTM0_SWOCTRL FTM_SWOCTRL_REG(FTM0) +#define FTM0_PWMLOAD FTM_PWMLOAD_REG(FTM0) +/* FTM1 */ +#define FTM1_SC FTM_SC_REG(FTM1) +#define FTM1_CNT FTM_CNT_REG(FTM1) +#define FTM1_MOD FTM_MOD_REG(FTM1) +#define FTM1_C0SC FTM_CnSC_REG(FTM1,0) +#define FTM1_C0V FTM_CnV_REG(FTM1,0) +#define FTM1_C1SC FTM_CnSC_REG(FTM1,1) +#define FTM1_C1V FTM_CnV_REG(FTM1,1) +#define FTM1_CNTIN FTM_CNTIN_REG(FTM1) +#define FTM1_STATUS FTM_STATUS_REG(FTM1) +#define FTM1_MODE FTM_MODE_REG(FTM1) +#define FTM1_SYNC FTM_SYNC_REG(FTM1) +#define FTM1_OUTINIT FTM_OUTINIT_REG(FTM1) +#define FTM1_OUTMASK FTM_OUTMASK_REG(FTM1) +#define FTM1_COMBINE FTM_COMBINE_REG(FTM1) +#define FTM1_DEADTIME FTM_DEADTIME_REG(FTM1) +#define FTM1_EXTTRIG FTM_EXTTRIG_REG(FTM1) +#define FTM1_POL FTM_POL_REG(FTM1) +#define FTM1_FMS FTM_FMS_REG(FTM1) +#define FTM1_FILTER FTM_FILTER_REG(FTM1) +#define FTM1_FLTCTRL FTM_FLTCTRL_REG(FTM1) +#define FTM1_QDCTRL FTM_QDCTRL_REG(FTM1) +#define FTM1_CONF FTM_CONF_REG(FTM1) +#define FTM1_FLTPOL FTM_FLTPOL_REG(FTM1) +#define FTM1_SYNCONF FTM_SYNCONF_REG(FTM1) +#define FTM1_INVCTRL FTM_INVCTRL_REG(FTM1) +#define FTM1_SWOCTRL FTM_SWOCTRL_REG(FTM1) +#define FTM1_PWMLOAD FTM_PWMLOAD_REG(FTM1) +/* FTM2 */ +#define FTM2_SC FTM_SC_REG(FTM2) +#define FTM2_CNT FTM_CNT_REG(FTM2) +#define FTM2_MOD FTM_MOD_REG(FTM2) +#define FTM2_C0SC FTM_CnSC_REG(FTM2,0) +#define FTM2_C0V FTM_CnV_REG(FTM2,0) +#define FTM2_C1SC FTM_CnSC_REG(FTM2,1) +#define FTM2_C1V FTM_CnV_REG(FTM2,1) +#define FTM2_CNTIN FTM_CNTIN_REG(FTM2) +#define FTM2_STATUS FTM_STATUS_REG(FTM2) +#define FTM2_MODE FTM_MODE_REG(FTM2) +#define FTM2_SYNC FTM_SYNC_REG(FTM2) +#define FTM2_OUTINIT FTM_OUTINIT_REG(FTM2) +#define FTM2_OUTMASK FTM_OUTMASK_REG(FTM2) +#define FTM2_COMBINE FTM_COMBINE_REG(FTM2) +#define FTM2_DEADTIME FTM_DEADTIME_REG(FTM2) +#define FTM2_EXTTRIG FTM_EXTTRIG_REG(FTM2) +#define FTM2_POL FTM_POL_REG(FTM2) +#define FTM2_FMS FTM_FMS_REG(FTM2) +#define FTM2_FILTER FTM_FILTER_REG(FTM2) +#define FTM2_FLTCTRL FTM_FLTCTRL_REG(FTM2) +#define FTM2_QDCTRL FTM_QDCTRL_REG(FTM2) +#define FTM2_CONF FTM_CONF_REG(FTM2) +#define FTM2_FLTPOL FTM_FLTPOL_REG(FTM2) +#define FTM2_SYNCONF FTM_SYNCONF_REG(FTM2) +#define FTM2_INVCTRL FTM_INVCTRL_REG(FTM2) +#define FTM2_SWOCTRL FTM_SWOCTRL_REG(FTM2) +#define FTM2_PWMLOAD FTM_PWMLOAD_REG(FTM2) +/* FTM3 */ +#define FTM3_SC FTM_SC_REG(FTM3) +#define FTM3_CNT FTM_CNT_REG(FTM3) +#define FTM3_MOD FTM_MOD_REG(FTM3) +#define FTM3_C0SC FTM_CnSC_REG(FTM3,0) +#define FTM3_C0V FTM_CnV_REG(FTM3,0) +#define FTM3_C1SC FTM_CnSC_REG(FTM3,1) +#define FTM3_C1V FTM_CnV_REG(FTM3,1) +#define FTM3_C2SC FTM_CnSC_REG(FTM3,2) +#define FTM3_C2V FTM_CnV_REG(FTM3,2) +#define FTM3_C3SC FTM_CnSC_REG(FTM3,3) +#define FTM3_C3V FTM_CnV_REG(FTM3,3) +#define FTM3_C4SC FTM_CnSC_REG(FTM3,4) +#define FTM3_C4V FTM_CnV_REG(FTM3,4) +#define FTM3_C5SC FTM_CnSC_REG(FTM3,5) +#define FTM3_C5V FTM_CnV_REG(FTM3,5) +#define FTM3_C6SC FTM_CnSC_REG(FTM3,6) +#define FTM3_C6V FTM_CnV_REG(FTM3,6) +#define FTM3_C7SC FTM_CnSC_REG(FTM3,7) +#define FTM3_C7V FTM_CnV_REG(FTM3,7) +#define FTM3_CNTIN FTM_CNTIN_REG(FTM3) +#define FTM3_STATUS FTM_STATUS_REG(FTM3) +#define FTM3_MODE FTM_MODE_REG(FTM3) +#define FTM3_SYNC FTM_SYNC_REG(FTM3) +#define FTM3_OUTINIT FTM_OUTINIT_REG(FTM3) +#define FTM3_OUTMASK FTM_OUTMASK_REG(FTM3) +#define FTM3_COMBINE FTM_COMBINE_REG(FTM3) +#define FTM3_DEADTIME FTM_DEADTIME_REG(FTM3) +#define FTM3_EXTTRIG FTM_EXTTRIG_REG(FTM3) +#define FTM3_POL FTM_POL_REG(FTM3) +#define FTM3_FMS FTM_FMS_REG(FTM3) +#define FTM3_FILTER FTM_FILTER_REG(FTM3) +#define FTM3_FLTCTRL FTM_FLTCTRL_REG(FTM3) +#define FTM3_QDCTRL FTM_QDCTRL_REG(FTM3) +#define FTM3_CONF FTM_CONF_REG(FTM3) +#define FTM3_FLTPOL FTM_FLTPOL_REG(FTM3) +#define FTM3_SYNCONF FTM_SYNCONF_REG(FTM3) +#define FTM3_INVCTRL FTM_INVCTRL_REG(FTM3) +#define FTM3_SWOCTRL FTM_SWOCTRL_REG(FTM3) +#define FTM3_PWMLOAD FTM_PWMLOAD_REG(FTM3) + +/* FTM - Register array accessors */ +#define FTM0_CnSC(index) FTM_CnSC_REG(FTM0,index) +#define FTM1_CnSC(index) FTM_CnSC_REG(FTM1,index) +#define FTM2_CnSC(index) FTM_CnSC_REG(FTM2,index) +#define FTM3_CnSC(index) FTM_CnSC_REG(FTM3,index) +#define FTM0_CnV(index) FTM_CnV_REG(FTM0,index) +#define FTM1_CnV(index) FTM_CnV_REG(FTM1,index) +#define FTM2_CnV(index) FTM_CnV_REG(FTM2,index) +#define FTM3_CnV(index) FTM_CnV_REG(FTM3,index) + +/*! + * @} + */ /* end of group FTM_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group FTM_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- GPIO Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup GPIO_Peripheral_Access_Layer GPIO Peripheral Access Layer + * @{ + */ + +/** GPIO - Register Layout Typedef */ +typedef struct { + __IO uint32_t PDOR; /**< Port Data Output Register, offset: 0x0 */ + __O uint32_t PSOR; /**< Port Set Output Register, offset: 0x4 */ + __O uint32_t PCOR; /**< Port Clear Output Register, offset: 0x8 */ + __O uint32_t PTOR; /**< Port Toggle Output Register, offset: 0xC */ + __I uint32_t PDIR; /**< Port Data Input Register, offset: 0x10 */ + __IO uint32_t PDDR; /**< Port Data Direction Register, offset: 0x14 */ +} GPIO_Type, *GPIO_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- GPIO - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup GPIO_Register_Accessor_Macros GPIO - Register accessor macros + * @{ + */ + + +/* GPIO - Register accessors */ +#define GPIO_PDOR_REG(base) ((base)->PDOR) +#define GPIO_PSOR_REG(base) ((base)->PSOR) +#define GPIO_PCOR_REG(base) ((base)->PCOR) +#define GPIO_PTOR_REG(base) ((base)->PTOR) +#define GPIO_PDIR_REG(base) ((base)->PDIR) +#define GPIO_PDDR_REG(base) ((base)->PDDR) + +/*! + * @} + */ /* end of group GPIO_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- GPIO Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup GPIO_Register_Masks GPIO Register Masks + * @{ + */ + +/* PDOR Bit Fields */ +#define GPIO_PDOR_PDO_MASK 0xFFFFFFFFu +#define GPIO_PDOR_PDO_SHIFT 0 +#define GPIO_PDOR_PDO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDOR_PDO_SHIFT))&GPIO_PDOR_PDO_MASK) +/* PSOR Bit Fields */ +#define GPIO_PSOR_PTSO_MASK 0xFFFFFFFFu +#define GPIO_PSOR_PTSO_SHIFT 0 +#define GPIO_PSOR_PTSO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PSOR_PTSO_SHIFT))&GPIO_PSOR_PTSO_MASK) +/* PCOR Bit Fields */ +#define GPIO_PCOR_PTCO_MASK 0xFFFFFFFFu +#define GPIO_PCOR_PTCO_SHIFT 0 +#define GPIO_PCOR_PTCO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PCOR_PTCO_SHIFT))&GPIO_PCOR_PTCO_MASK) +/* PTOR Bit Fields */ +#define GPIO_PTOR_PTTO_MASK 0xFFFFFFFFu +#define GPIO_PTOR_PTTO_SHIFT 0 +#define GPIO_PTOR_PTTO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PTOR_PTTO_SHIFT))&GPIO_PTOR_PTTO_MASK) +/* PDIR Bit Fields */ +#define GPIO_PDIR_PDI_MASK 0xFFFFFFFFu +#define GPIO_PDIR_PDI_SHIFT 0 +#define GPIO_PDIR_PDI(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDIR_PDI_SHIFT))&GPIO_PDIR_PDI_MASK) +/* PDDR Bit Fields */ +#define GPIO_PDDR_PDD_MASK 0xFFFFFFFFu +#define GPIO_PDDR_PDD_SHIFT 0 +#define GPIO_PDDR_PDD(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDDR_PDD_SHIFT))&GPIO_PDDR_PDD_MASK) + +/*! + * @} + */ /* end of group GPIO_Register_Masks */ + + +/* GPIO - Peripheral instance base addresses */ +/** Peripheral PTA base address */ +#define PTA_BASE (0x400FF000u) +/** Peripheral PTA base pointer */ +#define PTA ((GPIO_Type *)PTA_BASE) +#define PTA_BASE_PTR (PTA) +/** Peripheral PTB base address */ +#define PTB_BASE (0x400FF040u) +/** Peripheral PTB base pointer */ +#define PTB ((GPIO_Type *)PTB_BASE) +#define PTB_BASE_PTR (PTB) +/** Peripheral PTC base address */ +#define PTC_BASE (0x400FF080u) +/** Peripheral PTC base pointer */ +#define PTC ((GPIO_Type *)PTC_BASE) +#define PTC_BASE_PTR (PTC) +/** Peripheral PTD base address */ +#define PTD_BASE (0x400FF0C0u) +/** Peripheral PTD base pointer */ +#define PTD ((GPIO_Type *)PTD_BASE) +#define PTD_BASE_PTR (PTD) +/** Peripheral PTE base address */ +#define PTE_BASE (0x400FF100u) +/** Peripheral PTE base pointer */ +#define PTE ((GPIO_Type *)PTE_BASE) +#define PTE_BASE_PTR (PTE) +/** Array initializer of GPIO peripheral base addresses */ +#define GPIO_BASE_ADDRS { PTA_BASE, PTB_BASE, PTC_BASE, PTD_BASE, PTE_BASE } +/** Array initializer of GPIO peripheral base pointers */ +#define GPIO_BASE_PTRS { PTA, PTB, PTC, PTD, PTE } + +/* ---------------------------------------------------------------------------- + -- GPIO - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup GPIO_Register_Accessor_Macros GPIO - Register accessor macros + * @{ + */ + + +/* GPIO - Register instance definitions */ +/* PTA */ +#define GPIOA_PDOR GPIO_PDOR_REG(PTA) +#define GPIOA_PSOR GPIO_PSOR_REG(PTA) +#define GPIOA_PCOR GPIO_PCOR_REG(PTA) +#define GPIOA_PTOR GPIO_PTOR_REG(PTA) +#define GPIOA_PDIR GPIO_PDIR_REG(PTA) +#define GPIOA_PDDR GPIO_PDDR_REG(PTA) +/* PTB */ +#define GPIOB_PDOR GPIO_PDOR_REG(PTB) +#define GPIOB_PSOR GPIO_PSOR_REG(PTB) +#define GPIOB_PCOR GPIO_PCOR_REG(PTB) +#define GPIOB_PTOR GPIO_PTOR_REG(PTB) +#define GPIOB_PDIR GPIO_PDIR_REG(PTB) +#define GPIOB_PDDR GPIO_PDDR_REG(PTB) +/* PTC */ +#define GPIOC_PDOR GPIO_PDOR_REG(PTC) +#define GPIOC_PSOR GPIO_PSOR_REG(PTC) +#define GPIOC_PCOR GPIO_PCOR_REG(PTC) +#define GPIOC_PTOR GPIO_PTOR_REG(PTC) +#define GPIOC_PDIR GPIO_PDIR_REG(PTC) +#define GPIOC_PDDR GPIO_PDDR_REG(PTC) +/* PTD */ +#define GPIOD_PDOR GPIO_PDOR_REG(PTD) +#define GPIOD_PSOR GPIO_PSOR_REG(PTD) +#define GPIOD_PCOR GPIO_PCOR_REG(PTD) +#define GPIOD_PTOR GPIO_PTOR_REG(PTD) +#define GPIOD_PDIR GPIO_PDIR_REG(PTD) +#define GPIOD_PDDR GPIO_PDDR_REG(PTD) +/* PTE */ +#define GPIOE_PDOR GPIO_PDOR_REG(PTE) +#define GPIOE_PSOR GPIO_PSOR_REG(PTE) +#define GPIOE_PCOR GPIO_PCOR_REG(PTE) +#define GPIOE_PTOR GPIO_PTOR_REG(PTE) +#define GPIOE_PDIR GPIO_PDIR_REG(PTE) +#define GPIOE_PDDR GPIO_PDDR_REG(PTE) + +/*! + * @} + */ /* end of group GPIO_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group GPIO_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- I2C Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2C_Peripheral_Access_Layer I2C Peripheral Access Layer + * @{ + */ + +/** I2C - Register Layout Typedef */ +typedef struct { + __IO uint8_t A1; /**< I2C Address Register 1, offset: 0x0 */ + __IO uint8_t F; /**< I2C Frequency Divider register, offset: 0x1 */ + __IO uint8_t C1; /**< I2C Control Register 1, offset: 0x2 */ + __IO uint8_t S; /**< I2C Status register, offset: 0x3 */ + __IO uint8_t D; /**< I2C Data I/O register, offset: 0x4 */ + __IO uint8_t C2; /**< I2C Control Register 2, offset: 0x5 */ + __IO uint8_t FLT; /**< I2C Programmable Input Glitch Filter register, offset: 0x6 */ + __IO uint8_t RA; /**< I2C Range Address register, offset: 0x7 */ + __IO uint8_t SMB; /**< I2C SMBus Control and Status register, offset: 0x8 */ + __IO uint8_t A2; /**< I2C Address Register 2, offset: 0x9 */ + __IO uint8_t SLTH; /**< I2C SCL Low Timeout Register High, offset: 0xA */ + __IO uint8_t SLTL; /**< I2C SCL Low Timeout Register Low, offset: 0xB */ +} I2C_Type, *I2C_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- I2C - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2C_Register_Accessor_Macros I2C - Register accessor macros + * @{ + */ + + +/* I2C - Register accessors */ +#define I2C_A1_REG(base) ((base)->A1) +#define I2C_F_REG(base) ((base)->F) +#define I2C_C1_REG(base) ((base)->C1) +#define I2C_S_REG(base) ((base)->S) +#define I2C_D_REG(base) ((base)->D) +#define I2C_C2_REG(base) ((base)->C2) +#define I2C_FLT_REG(base) ((base)->FLT) +#define I2C_RA_REG(base) ((base)->RA) +#define I2C_SMB_REG(base) ((base)->SMB) +#define I2C_A2_REG(base) ((base)->A2) +#define I2C_SLTH_REG(base) ((base)->SLTH) +#define I2C_SLTL_REG(base) ((base)->SLTL) + +/*! + * @} + */ /* end of group I2C_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- I2C Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2C_Register_Masks I2C Register Masks + * @{ + */ + +/* A1 Bit Fields */ +#define I2C_A1_AD_MASK 0xFEu +#define I2C_A1_AD_SHIFT 1 +#define I2C_A1_AD(x) (((uint8_t)(((uint8_t)(x))<<I2C_A1_AD_SHIFT))&I2C_A1_AD_MASK) +/* F Bit Fields */ +#define I2C_F_ICR_MASK 0x3Fu +#define I2C_F_ICR_SHIFT 0 +#define I2C_F_ICR(x) (((uint8_t)(((uint8_t)(x))<<I2C_F_ICR_SHIFT))&I2C_F_ICR_MASK) +#define I2C_F_MULT_MASK 0xC0u +#define I2C_F_MULT_SHIFT 6 +#define I2C_F_MULT(x) (((uint8_t)(((uint8_t)(x))<<I2C_F_MULT_SHIFT))&I2C_F_MULT_MASK) +/* C1 Bit Fields */ +#define I2C_C1_DMAEN_MASK 0x1u +#define I2C_C1_DMAEN_SHIFT 0 +#define I2C_C1_WUEN_MASK 0x2u +#define I2C_C1_WUEN_SHIFT 1 +#define I2C_C1_RSTA_MASK 0x4u +#define I2C_C1_RSTA_SHIFT 2 +#define I2C_C1_TXAK_MASK 0x8u +#define I2C_C1_TXAK_SHIFT 3 +#define I2C_C1_TX_MASK 0x10u +#define I2C_C1_TX_SHIFT 4 +#define I2C_C1_MST_MASK 0x20u +#define I2C_C1_MST_SHIFT 5 +#define I2C_C1_IICIE_MASK 0x40u +#define I2C_C1_IICIE_SHIFT 6 +#define I2C_C1_IICEN_MASK 0x80u +#define I2C_C1_IICEN_SHIFT 7 +/* S Bit Fields */ +#define I2C_S_RXAK_MASK 0x1u +#define I2C_S_RXAK_SHIFT 0 +#define I2C_S_IICIF_MASK 0x2u +#define I2C_S_IICIF_SHIFT 1 +#define I2C_S_SRW_MASK 0x4u +#define I2C_S_SRW_SHIFT 2 +#define I2C_S_RAM_MASK 0x8u +#define I2C_S_RAM_SHIFT 3 +#define I2C_S_ARBL_MASK 0x10u +#define I2C_S_ARBL_SHIFT 4 +#define I2C_S_BUSY_MASK 0x20u +#define I2C_S_BUSY_SHIFT 5 +#define I2C_S_IAAS_MASK 0x40u +#define I2C_S_IAAS_SHIFT 6 +#define I2C_S_TCF_MASK 0x80u +#define I2C_S_TCF_SHIFT 7 +/* D Bit Fields */ +#define I2C_D_DATA_MASK 0xFFu +#define I2C_D_DATA_SHIFT 0 +#define I2C_D_DATA(x) (((uint8_t)(((uint8_t)(x))<<I2C_D_DATA_SHIFT))&I2C_D_DATA_MASK) +/* C2 Bit Fields */ +#define I2C_C2_AD_MASK 0x7u +#define I2C_C2_AD_SHIFT 0 +#define I2C_C2_AD(x) (((uint8_t)(((uint8_t)(x))<<I2C_C2_AD_SHIFT))&I2C_C2_AD_MASK) +#define I2C_C2_RMEN_MASK 0x8u +#define I2C_C2_RMEN_SHIFT 3 +#define I2C_C2_SBRC_MASK 0x10u +#define I2C_C2_SBRC_SHIFT 4 +#define I2C_C2_HDRS_MASK 0x20u +#define I2C_C2_HDRS_SHIFT 5 +#define I2C_C2_ADEXT_MASK 0x40u +#define I2C_C2_ADEXT_SHIFT 6 +#define I2C_C2_GCAEN_MASK 0x80u +#define I2C_C2_GCAEN_SHIFT 7 +/* FLT Bit Fields */ +#define I2C_FLT_FLT_MASK 0xFu +#define I2C_FLT_FLT_SHIFT 0 +#define I2C_FLT_FLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_FLT_FLT_SHIFT))&I2C_FLT_FLT_MASK) +#define I2C_FLT_STARTF_MASK 0x10u +#define I2C_FLT_STARTF_SHIFT 4 +#define I2C_FLT_SSIE_MASK 0x20u +#define I2C_FLT_SSIE_SHIFT 5 +#define I2C_FLT_STOPF_MASK 0x40u +#define I2C_FLT_STOPF_SHIFT 6 +#define I2C_FLT_SHEN_MASK 0x80u +#define I2C_FLT_SHEN_SHIFT 7 +/* RA Bit Fields */ +#define I2C_RA_RAD_MASK 0xFEu +#define I2C_RA_RAD_SHIFT 1 +#define I2C_RA_RAD(x) (((uint8_t)(((uint8_t)(x))<<I2C_RA_RAD_SHIFT))&I2C_RA_RAD_MASK) +/* SMB Bit Fields */ +#define I2C_SMB_SHTF2IE_MASK 0x1u +#define I2C_SMB_SHTF2IE_SHIFT 0 +#define I2C_SMB_SHTF2_MASK 0x2u +#define I2C_SMB_SHTF2_SHIFT 1 +#define I2C_SMB_SHTF1_MASK 0x4u +#define I2C_SMB_SHTF1_SHIFT 2 +#define I2C_SMB_SLTF_MASK 0x8u +#define I2C_SMB_SLTF_SHIFT 3 +#define I2C_SMB_TCKSEL_MASK 0x10u +#define I2C_SMB_TCKSEL_SHIFT 4 +#define I2C_SMB_SIICAEN_MASK 0x20u +#define I2C_SMB_SIICAEN_SHIFT 5 +#define I2C_SMB_ALERTEN_MASK 0x40u +#define I2C_SMB_ALERTEN_SHIFT 6 +#define I2C_SMB_FACK_MASK 0x80u +#define I2C_SMB_FACK_SHIFT 7 +/* A2 Bit Fields */ +#define I2C_A2_SAD_MASK 0xFEu +#define I2C_A2_SAD_SHIFT 1 +#define I2C_A2_SAD(x) (((uint8_t)(((uint8_t)(x))<<I2C_A2_SAD_SHIFT))&I2C_A2_SAD_MASK) +/* SLTH Bit Fields */ +#define I2C_SLTH_SSLT_MASK 0xFFu +#define I2C_SLTH_SSLT_SHIFT 0 +#define I2C_SLTH_SSLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_SLTH_SSLT_SHIFT))&I2C_SLTH_SSLT_MASK) +/* SLTL Bit Fields */ +#define I2C_SLTL_SSLT_MASK 0xFFu +#define I2C_SLTL_SSLT_SHIFT 0 +#define I2C_SLTL_SSLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_SLTL_SSLT_SHIFT))&I2C_SLTL_SSLT_MASK) + +/*! + * @} + */ /* end of group I2C_Register_Masks */ + + +/* I2C - Peripheral instance base addresses */ +/** Peripheral I2C0 base address */ +#define I2C0_BASE (0x40066000u) +/** Peripheral I2C0 base pointer */ +#define I2C0 ((I2C_Type *)I2C0_BASE) +#define I2C0_BASE_PTR (I2C0) +/** Peripheral I2C1 base address */ +#define I2C1_BASE (0x40067000u) +/** Peripheral I2C1 base pointer */ +#define I2C1 ((I2C_Type *)I2C1_BASE) +#define I2C1_BASE_PTR (I2C1) +/** Array initializer of I2C peripheral base addresses */ +#define I2C_BASE_ADDRS { I2C0_BASE, I2C1_BASE } +/** Array initializer of I2C peripheral base pointers */ +#define I2C_BASE_PTRS { I2C0, I2C1 } +/** Interrupt vectors for the I2C peripheral type */ +#define I2C_IRQS { I2C0_IRQn, I2C1_IRQn } + +/* ---------------------------------------------------------------------------- + -- I2C - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2C_Register_Accessor_Macros I2C - Register accessor macros + * @{ + */ + + +/* I2C - Register instance definitions */ +/* I2C0 */ +#define I2C0_A1 I2C_A1_REG(I2C0) +#define I2C0_F I2C_F_REG(I2C0) +#define I2C0_C1 I2C_C1_REG(I2C0) +#define I2C0_S I2C_S_REG(I2C0) +#define I2C0_D I2C_D_REG(I2C0) +#define I2C0_C2 I2C_C2_REG(I2C0) +#define I2C0_FLT I2C_FLT_REG(I2C0) +#define I2C0_RA I2C_RA_REG(I2C0) +#define I2C0_SMB I2C_SMB_REG(I2C0) +#define I2C0_A2 I2C_A2_REG(I2C0) +#define I2C0_SLTH I2C_SLTH_REG(I2C0) +#define I2C0_SLTL I2C_SLTL_REG(I2C0) +/* I2C1 */ +#define I2C1_A1 I2C_A1_REG(I2C1) +#define I2C1_F I2C_F_REG(I2C1) +#define I2C1_C1 I2C_C1_REG(I2C1) +#define I2C1_S I2C_S_REG(I2C1) +#define I2C1_D I2C_D_REG(I2C1) +#define I2C1_C2 I2C_C2_REG(I2C1) +#define I2C1_FLT I2C_FLT_REG(I2C1) +#define I2C1_RA I2C_RA_REG(I2C1) +#define I2C1_SMB I2C_SMB_REG(I2C1) +#define I2C1_A2 I2C_A2_REG(I2C1) +#define I2C1_SLTH I2C_SLTH_REG(I2C1) +#define I2C1_SLTL I2C_SLTL_REG(I2C1) + +/*! + * @} + */ /* end of group I2C_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group I2C_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- I2S Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2S_Peripheral_Access_Layer I2S Peripheral Access Layer + * @{ + */ + +/** I2S - Register Layout Typedef */ +typedef struct { + __IO uint32_t TCSR; /**< SAI Transmit Control Register, offset: 0x0 */ + __IO uint32_t TCR1; /**< SAI Transmit Configuration 1 Register, offset: 0x4 */ + __IO uint32_t TCR2; /**< SAI Transmit Configuration 2 Register, offset: 0x8 */ + __IO uint32_t TCR3; /**< SAI Transmit Configuration 3 Register, offset: 0xC */ + __IO uint32_t TCR4; /**< SAI Transmit Configuration 4 Register, offset: 0x10 */ + __IO uint32_t TCR5; /**< SAI Transmit Configuration 5 Register, offset: 0x14 */ + uint8_t RESERVED_0[8]; + __O uint32_t TDR[1]; /**< SAI Transmit Data Register, array offset: 0x20, array step: 0x4 */ + uint8_t RESERVED_1[28]; + __I uint32_t TFR[1]; /**< SAI Transmit FIFO Register, array offset: 0x40, array step: 0x4 */ + uint8_t RESERVED_2[28]; + __IO uint32_t TMR; /**< SAI Transmit Mask Register, offset: 0x60 */ + uint8_t RESERVED_3[28]; + __IO uint32_t RCSR; /**< SAI Receive Control Register, offset: 0x80 */ + __IO uint32_t RCR1; /**< SAI Receive Configuration 1 Register, offset: 0x84 */ + __IO uint32_t RCR2; /**< SAI Receive Configuration 2 Register, offset: 0x88 */ + __IO uint32_t RCR3; /**< SAI Receive Configuration 3 Register, offset: 0x8C */ + __IO uint32_t RCR4; /**< SAI Receive Configuration 4 Register, offset: 0x90 */ + __IO uint32_t RCR5; /**< SAI Receive Configuration 5 Register, offset: 0x94 */ + uint8_t RESERVED_4[8]; + __I uint32_t RDR[1]; /**< SAI Receive Data Register, array offset: 0xA0, array step: 0x4 */ + uint8_t RESERVED_5[28]; + __I uint32_t RFR[1]; /**< SAI Receive FIFO Register, array offset: 0xC0, array step: 0x4 */ + uint8_t RESERVED_6[28]; + __IO uint32_t RMR; /**< SAI Receive Mask Register, offset: 0xE0 */ + uint8_t RESERVED_7[28]; + __IO uint32_t MCR; /**< SAI MCLK Control Register, offset: 0x100 */ + __IO uint32_t MDR; /**< SAI MCLK Divide Register, offset: 0x104 */ +} I2S_Type, *I2S_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- I2S - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2S_Register_Accessor_Macros I2S - Register accessor macros + * @{ + */ + + +/* I2S - Register accessors */ +#define I2S_TCSR_REG(base) ((base)->TCSR) +#define I2S_TCR1_REG(base) ((base)->TCR1) +#define I2S_TCR2_REG(base) ((base)->TCR2) +#define I2S_TCR3_REG(base) ((base)->TCR3) +#define I2S_TCR4_REG(base) ((base)->TCR4) +#define I2S_TCR5_REG(base) ((base)->TCR5) +#define I2S_TDR_REG(base,index) ((base)->TDR[index]) +#define I2S_TFR_REG(base,index) ((base)->TFR[index]) +#define I2S_TMR_REG(base) ((base)->TMR) +#define I2S_RCSR_REG(base) ((base)->RCSR) +#define I2S_RCR1_REG(base) ((base)->RCR1) +#define I2S_RCR2_REG(base) ((base)->RCR2) +#define I2S_RCR3_REG(base) ((base)->RCR3) +#define I2S_RCR4_REG(base) ((base)->RCR4) +#define I2S_RCR5_REG(base) ((base)->RCR5) +#define I2S_RDR_REG(base,index) ((base)->RDR[index]) +#define I2S_RFR_REG(base,index) ((base)->RFR[index]) +#define I2S_RMR_REG(base) ((base)->RMR) +#define I2S_MCR_REG(base) ((base)->MCR) +#define I2S_MDR_REG(base) ((base)->MDR) + +/*! + * @} + */ /* end of group I2S_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- I2S Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2S_Register_Masks I2S Register Masks + * @{ + */ + +/* TCSR Bit Fields */ +#define I2S_TCSR_FRDE_MASK 0x1u +#define I2S_TCSR_FRDE_SHIFT 0 +#define I2S_TCSR_FWDE_MASK 0x2u +#define I2S_TCSR_FWDE_SHIFT 1 +#define I2S_TCSR_FRIE_MASK 0x100u +#define I2S_TCSR_FRIE_SHIFT 8 +#define I2S_TCSR_FWIE_MASK 0x200u +#define I2S_TCSR_FWIE_SHIFT 9 +#define I2S_TCSR_FEIE_MASK 0x400u +#define I2S_TCSR_FEIE_SHIFT 10 +#define I2S_TCSR_SEIE_MASK 0x800u +#define I2S_TCSR_SEIE_SHIFT 11 +#define I2S_TCSR_WSIE_MASK 0x1000u +#define I2S_TCSR_WSIE_SHIFT 12 +#define I2S_TCSR_FRF_MASK 0x10000u +#define I2S_TCSR_FRF_SHIFT 16 +#define I2S_TCSR_FWF_MASK 0x20000u +#define I2S_TCSR_FWF_SHIFT 17 +#define I2S_TCSR_FEF_MASK 0x40000u +#define I2S_TCSR_FEF_SHIFT 18 +#define I2S_TCSR_SEF_MASK 0x80000u +#define I2S_TCSR_SEF_SHIFT 19 +#define I2S_TCSR_WSF_MASK 0x100000u +#define I2S_TCSR_WSF_SHIFT 20 +#define I2S_TCSR_SR_MASK 0x1000000u +#define I2S_TCSR_SR_SHIFT 24 +#define I2S_TCSR_FR_MASK 0x2000000u +#define I2S_TCSR_FR_SHIFT 25 +#define I2S_TCSR_BCE_MASK 0x10000000u +#define I2S_TCSR_BCE_SHIFT 28 +#define I2S_TCSR_DBGE_MASK 0x20000000u +#define I2S_TCSR_DBGE_SHIFT 29 +#define I2S_TCSR_STOPE_MASK 0x40000000u +#define I2S_TCSR_STOPE_SHIFT 30 +#define I2S_TCSR_TE_MASK 0x80000000u +#define I2S_TCSR_TE_SHIFT 31 +/* TCR1 Bit Fields */ +#define I2S_TCR1_TFW_MASK 0x7u +#define I2S_TCR1_TFW_SHIFT 0 +#define I2S_TCR1_TFW(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR1_TFW_SHIFT))&I2S_TCR1_TFW_MASK) +/* TCR2 Bit Fields */ +#define I2S_TCR2_DIV_MASK 0xFFu +#define I2S_TCR2_DIV_SHIFT 0 +#define I2S_TCR2_DIV(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_DIV_SHIFT))&I2S_TCR2_DIV_MASK) +#define I2S_TCR2_BCD_MASK 0x1000000u +#define I2S_TCR2_BCD_SHIFT 24 +#define I2S_TCR2_BCP_MASK 0x2000000u +#define I2S_TCR2_BCP_SHIFT 25 +#define I2S_TCR2_MSEL_MASK 0xC000000u +#define I2S_TCR2_MSEL_SHIFT 26 +#define I2S_TCR2_MSEL(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_MSEL_SHIFT))&I2S_TCR2_MSEL_MASK) +#define I2S_TCR2_BCI_MASK 0x10000000u +#define I2S_TCR2_BCI_SHIFT 28 +#define I2S_TCR2_BCS_MASK 0x20000000u +#define I2S_TCR2_BCS_SHIFT 29 +#define I2S_TCR2_SYNC_MASK 0xC0000000u +#define I2S_TCR2_SYNC_SHIFT 30 +#define I2S_TCR2_SYNC(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_SYNC_SHIFT))&I2S_TCR2_SYNC_MASK) +/* TCR3 Bit Fields */ +#define I2S_TCR3_WDFL_MASK 0xFu +#define I2S_TCR3_WDFL_SHIFT 0 +#define I2S_TCR3_WDFL(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR3_WDFL_SHIFT))&I2S_TCR3_WDFL_MASK) +#define I2S_TCR3_TCE_MASK 0x10000u +#define I2S_TCR3_TCE_SHIFT 16 +/* TCR4 Bit Fields */ +#define I2S_TCR4_FSD_MASK 0x1u +#define I2S_TCR4_FSD_SHIFT 0 +#define I2S_TCR4_FSP_MASK 0x2u +#define I2S_TCR4_FSP_SHIFT 1 +#define I2S_TCR4_ONDEM_MASK 0x4u +#define I2S_TCR4_ONDEM_SHIFT 2 +#define I2S_TCR4_FSE_MASK 0x8u +#define I2S_TCR4_FSE_SHIFT 3 +#define I2S_TCR4_MF_MASK 0x10u +#define I2S_TCR4_MF_SHIFT 4 +#define I2S_TCR4_SYWD_MASK 0x1F00u +#define I2S_TCR4_SYWD_SHIFT 8 +#define I2S_TCR4_SYWD(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR4_SYWD_SHIFT))&I2S_TCR4_SYWD_MASK) +#define I2S_TCR4_FRSZ_MASK 0xF0000u +#define I2S_TCR4_FRSZ_SHIFT 16 +#define I2S_TCR4_FRSZ(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR4_FRSZ_SHIFT))&I2S_TCR4_FRSZ_MASK) +#define I2S_TCR4_FPACK_MASK 0x3000000u +#define I2S_TCR4_FPACK_SHIFT 24 +#define I2S_TCR4_FPACK(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR4_FPACK_SHIFT))&I2S_TCR4_FPACK_MASK) +#define I2S_TCR4_FCONT_MASK 0x10000000u +#define I2S_TCR4_FCONT_SHIFT 28 +/* TCR5 Bit Fields */ +#define I2S_TCR5_FBT_MASK 0x1F00u +#define I2S_TCR5_FBT_SHIFT 8 +#define I2S_TCR5_FBT(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_FBT_SHIFT))&I2S_TCR5_FBT_MASK) +#define I2S_TCR5_W0W_MASK 0x1F0000u +#define I2S_TCR5_W0W_SHIFT 16 +#define I2S_TCR5_W0W(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_W0W_SHIFT))&I2S_TCR5_W0W_MASK) +#define I2S_TCR5_WNW_MASK 0x1F000000u +#define I2S_TCR5_WNW_SHIFT 24 +#define I2S_TCR5_WNW(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_WNW_SHIFT))&I2S_TCR5_WNW_MASK) +/* TDR Bit Fields */ +#define I2S_TDR_TDR_MASK 0xFFFFFFFFu +#define I2S_TDR_TDR_SHIFT 0 +#define I2S_TDR_TDR(x) (((uint32_t)(((uint32_t)(x))<<I2S_TDR_TDR_SHIFT))&I2S_TDR_TDR_MASK) +/* TFR Bit Fields */ +#define I2S_TFR_RFP_MASK 0xFu +#define I2S_TFR_RFP_SHIFT 0 +#define I2S_TFR_RFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_TFR_RFP_SHIFT))&I2S_TFR_RFP_MASK) +#define I2S_TFR_WFP_MASK 0xF0000u +#define I2S_TFR_WFP_SHIFT 16 +#define I2S_TFR_WFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_TFR_WFP_SHIFT))&I2S_TFR_WFP_MASK) +/* TMR Bit Fields */ +#define I2S_TMR_TWM_MASK 0xFFFFu +#define I2S_TMR_TWM_SHIFT 0 +#define I2S_TMR_TWM(x) (((uint32_t)(((uint32_t)(x))<<I2S_TMR_TWM_SHIFT))&I2S_TMR_TWM_MASK) +/* RCSR Bit Fields */ +#define I2S_RCSR_FRDE_MASK 0x1u +#define I2S_RCSR_FRDE_SHIFT 0 +#define I2S_RCSR_FWDE_MASK 0x2u +#define I2S_RCSR_FWDE_SHIFT 1 +#define I2S_RCSR_FRIE_MASK 0x100u +#define I2S_RCSR_FRIE_SHIFT 8 +#define I2S_RCSR_FWIE_MASK 0x200u +#define I2S_RCSR_FWIE_SHIFT 9 +#define I2S_RCSR_FEIE_MASK 0x400u +#define I2S_RCSR_FEIE_SHIFT 10 +#define I2S_RCSR_SEIE_MASK 0x800u +#define I2S_RCSR_SEIE_SHIFT 11 +#define I2S_RCSR_WSIE_MASK 0x1000u +#define I2S_RCSR_WSIE_SHIFT 12 +#define I2S_RCSR_FRF_MASK 0x10000u +#define I2S_RCSR_FRF_SHIFT 16 +#define I2S_RCSR_FWF_MASK 0x20000u +#define I2S_RCSR_FWF_SHIFT 17 +#define I2S_RCSR_FEF_MASK 0x40000u +#define I2S_RCSR_FEF_SHIFT 18 +#define I2S_RCSR_SEF_MASK 0x80000u +#define I2S_RCSR_SEF_SHIFT 19 +#define I2S_RCSR_WSF_MASK 0x100000u +#define I2S_RCSR_WSF_SHIFT 20 +#define I2S_RCSR_SR_MASK 0x1000000u +#define I2S_RCSR_SR_SHIFT 24 +#define I2S_RCSR_FR_MASK 0x2000000u +#define I2S_RCSR_FR_SHIFT 25 +#define I2S_RCSR_BCE_MASK 0x10000000u +#define I2S_RCSR_BCE_SHIFT 28 +#define I2S_RCSR_DBGE_MASK 0x20000000u +#define I2S_RCSR_DBGE_SHIFT 29 +#define I2S_RCSR_STOPE_MASK 0x40000000u +#define I2S_RCSR_STOPE_SHIFT 30 +#define I2S_RCSR_RE_MASK 0x80000000u +#define I2S_RCSR_RE_SHIFT 31 +/* RCR1 Bit Fields */ +#define I2S_RCR1_RFW_MASK 0x7u +#define I2S_RCR1_RFW_SHIFT 0 +#define I2S_RCR1_RFW(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR1_RFW_SHIFT))&I2S_RCR1_RFW_MASK) +/* RCR2 Bit Fields */ +#define I2S_RCR2_DIV_MASK 0xFFu +#define I2S_RCR2_DIV_SHIFT 0 +#define I2S_RCR2_DIV(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_DIV_SHIFT))&I2S_RCR2_DIV_MASK) +#define I2S_RCR2_BCD_MASK 0x1000000u +#define I2S_RCR2_BCD_SHIFT 24 +#define I2S_RCR2_BCP_MASK 0x2000000u +#define I2S_RCR2_BCP_SHIFT 25 +#define I2S_RCR2_MSEL_MASK 0xC000000u +#define I2S_RCR2_MSEL_SHIFT 26 +#define I2S_RCR2_MSEL(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_MSEL_SHIFT))&I2S_RCR2_MSEL_MASK) +#define I2S_RCR2_BCI_MASK 0x10000000u +#define I2S_RCR2_BCI_SHIFT 28 +#define I2S_RCR2_BCS_MASK 0x20000000u +#define I2S_RCR2_BCS_SHIFT 29 +#define I2S_RCR2_SYNC_MASK 0xC0000000u +#define I2S_RCR2_SYNC_SHIFT 30 +#define I2S_RCR2_SYNC(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_SYNC_SHIFT))&I2S_RCR2_SYNC_MASK) +/* RCR3 Bit Fields */ +#define I2S_RCR3_WDFL_MASK 0xFu +#define I2S_RCR3_WDFL_SHIFT 0 +#define I2S_RCR3_WDFL(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR3_WDFL_SHIFT))&I2S_RCR3_WDFL_MASK) +#define I2S_RCR3_RCE_MASK 0x10000u +#define I2S_RCR3_RCE_SHIFT 16 +/* RCR4 Bit Fields */ +#define I2S_RCR4_FSD_MASK 0x1u +#define I2S_RCR4_FSD_SHIFT 0 +#define I2S_RCR4_FSP_MASK 0x2u +#define I2S_RCR4_FSP_SHIFT 1 +#define I2S_RCR4_ONDEM_MASK 0x4u +#define I2S_RCR4_ONDEM_SHIFT 2 +#define I2S_RCR4_FSE_MASK 0x8u +#define I2S_RCR4_FSE_SHIFT 3 +#define I2S_RCR4_MF_MASK 0x10u +#define I2S_RCR4_MF_SHIFT 4 +#define I2S_RCR4_SYWD_MASK 0x1F00u +#define I2S_RCR4_SYWD_SHIFT 8 +#define I2S_RCR4_SYWD(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR4_SYWD_SHIFT))&I2S_RCR4_SYWD_MASK) +#define I2S_RCR4_FRSZ_MASK 0xF0000u +#define I2S_RCR4_FRSZ_SHIFT 16 +#define I2S_RCR4_FRSZ(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR4_FRSZ_SHIFT))&I2S_RCR4_FRSZ_MASK) +#define I2S_RCR4_FPACK_MASK 0x3000000u +#define I2S_RCR4_FPACK_SHIFT 24 +#define I2S_RCR4_FPACK(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR4_FPACK_SHIFT))&I2S_RCR4_FPACK_MASK) +#define I2S_RCR4_FCONT_MASK 0x10000000u +#define I2S_RCR4_FCONT_SHIFT 28 +/* RCR5 Bit Fields */ +#define I2S_RCR5_FBT_MASK 0x1F00u +#define I2S_RCR5_FBT_SHIFT 8 +#define I2S_RCR5_FBT(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_FBT_SHIFT))&I2S_RCR5_FBT_MASK) +#define I2S_RCR5_W0W_MASK 0x1F0000u +#define I2S_RCR5_W0W_SHIFT 16 +#define I2S_RCR5_W0W(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_W0W_SHIFT))&I2S_RCR5_W0W_MASK) +#define I2S_RCR5_WNW_MASK 0x1F000000u +#define I2S_RCR5_WNW_SHIFT 24 +#define I2S_RCR5_WNW(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_WNW_SHIFT))&I2S_RCR5_WNW_MASK) +/* RDR Bit Fields */ +#define I2S_RDR_RDR_MASK 0xFFFFFFFFu +#define I2S_RDR_RDR_SHIFT 0 +#define I2S_RDR_RDR(x) (((uint32_t)(((uint32_t)(x))<<I2S_RDR_RDR_SHIFT))&I2S_RDR_RDR_MASK) +/* RFR Bit Fields */ +#define I2S_RFR_RFP_MASK 0xFu +#define I2S_RFR_RFP_SHIFT 0 +#define I2S_RFR_RFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_RFR_RFP_SHIFT))&I2S_RFR_RFP_MASK) +#define I2S_RFR_WFP_MASK 0xF0000u +#define I2S_RFR_WFP_SHIFT 16 +#define I2S_RFR_WFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_RFR_WFP_SHIFT))&I2S_RFR_WFP_MASK) +/* RMR Bit Fields */ +#define I2S_RMR_RWM_MASK 0xFFFFu +#define I2S_RMR_RWM_SHIFT 0 +#define I2S_RMR_RWM(x) (((uint32_t)(((uint32_t)(x))<<I2S_RMR_RWM_SHIFT))&I2S_RMR_RWM_MASK) +/* MCR Bit Fields */ +#define I2S_MCR_MICS_MASK 0x3000000u +#define I2S_MCR_MICS_SHIFT 24 +#define I2S_MCR_MICS(x) (((uint32_t)(((uint32_t)(x))<<I2S_MCR_MICS_SHIFT))&I2S_MCR_MICS_MASK) +#define I2S_MCR_MOE_MASK 0x40000000u +#define I2S_MCR_MOE_SHIFT 30 +#define I2S_MCR_DUF_MASK 0x80000000u +#define I2S_MCR_DUF_SHIFT 31 +/* MDR Bit Fields */ +#define I2S_MDR_DIVIDE_MASK 0xFFFu +#define I2S_MDR_DIVIDE_SHIFT 0 +#define I2S_MDR_DIVIDE(x) (((uint32_t)(((uint32_t)(x))<<I2S_MDR_DIVIDE_SHIFT))&I2S_MDR_DIVIDE_MASK) +#define I2S_MDR_FRACT_MASK 0xFF000u +#define I2S_MDR_FRACT_SHIFT 12 +#define I2S_MDR_FRACT(x) (((uint32_t)(((uint32_t)(x))<<I2S_MDR_FRACT_SHIFT))&I2S_MDR_FRACT_MASK) + +/*! + * @} + */ /* end of group I2S_Register_Masks */ + + +/* I2S - Peripheral instance base addresses */ +/** Peripheral I2S0 base address */ +#define I2S0_BASE (0x4002F000u) +/** Peripheral I2S0 base pointer */ +#define I2S0 ((I2S_Type *)I2S0_BASE) +#define I2S0_BASE_PTR (I2S0) +/** Array initializer of I2S peripheral base addresses */ +#define I2S_BASE_ADDRS { I2S0_BASE } +/** Array initializer of I2S peripheral base pointers */ +#define I2S_BASE_PTRS { I2S0 } +/** Interrupt vectors for the I2S peripheral type */ +#define I2S_RX_IRQS { I2S0_Rx_IRQn } +#define I2S_TX_IRQS { I2S0_Tx_IRQn } + +/* ---------------------------------------------------------------------------- + -- I2S - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup I2S_Register_Accessor_Macros I2S - Register accessor macros + * @{ + */ + + +/* I2S - Register instance definitions */ +/* I2S0 */ +#define I2S0_TCSR I2S_TCSR_REG(I2S0) +#define I2S0_TCR1 I2S_TCR1_REG(I2S0) +#define I2S0_TCR2 I2S_TCR2_REG(I2S0) +#define I2S0_TCR3 I2S_TCR3_REG(I2S0) +#define I2S0_TCR4 I2S_TCR4_REG(I2S0) +#define I2S0_TCR5 I2S_TCR5_REG(I2S0) +#define I2S0_TDR0 I2S_TDR_REG(I2S0,0) +#define I2S0_TFR0 I2S_TFR_REG(I2S0,0) +#define I2S0_TMR I2S_TMR_REG(I2S0) +#define I2S0_RCSR I2S_RCSR_REG(I2S0) +#define I2S0_RCR1 I2S_RCR1_REG(I2S0) +#define I2S0_RCR2 I2S_RCR2_REG(I2S0) +#define I2S0_RCR3 I2S_RCR3_REG(I2S0) +#define I2S0_RCR4 I2S_RCR4_REG(I2S0) +#define I2S0_RCR5 I2S_RCR5_REG(I2S0) +#define I2S0_RDR0 I2S_RDR_REG(I2S0,0) +#define I2S0_RFR0 I2S_RFR_REG(I2S0,0) +#define I2S0_RMR I2S_RMR_REG(I2S0) +#define I2S0_MCR I2S_MCR_REG(I2S0) +#define I2S0_MDR I2S_MDR_REG(I2S0) + +/* I2S - Register array accessors */ +#define I2S0_TDR(index) I2S_TDR_REG(I2S0,index) +#define I2S0_TFR(index) I2S_TFR_REG(I2S0,index) +#define I2S0_RDR(index) I2S_RDR_REG(I2S0,index) +#define I2S0_RFR(index) I2S_RFR_REG(I2S0,index) + +/*! + * @} + */ /* end of group I2S_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group I2S_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- LLWU Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LLWU_Peripheral_Access_Layer LLWU Peripheral Access Layer + * @{ + */ + +/** LLWU - Register Layout Typedef */ +typedef struct { + __IO uint8_t PE1; /**< LLWU Pin Enable 1 register, offset: 0x0 */ + __IO uint8_t PE2; /**< LLWU Pin Enable 2 register, offset: 0x1 */ + __IO uint8_t PE3; /**< LLWU Pin Enable 3 register, offset: 0x2 */ + __IO uint8_t PE4; /**< LLWU Pin Enable 4 register, offset: 0x3 */ + __IO uint8_t ME; /**< LLWU Module Enable register, offset: 0x4 */ + __IO uint8_t F1; /**< LLWU Flag 1 register, offset: 0x5 */ + __IO uint8_t F2; /**< LLWU Flag 2 register, offset: 0x6 */ + __I uint8_t F3; /**< LLWU Flag 3 register, offset: 0x7 */ + __IO uint8_t FILT1; /**< LLWU Pin Filter 1 register, offset: 0x8 */ + __IO uint8_t FILT2; /**< LLWU Pin Filter 2 register, offset: 0x9 */ +} LLWU_Type, *LLWU_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- LLWU - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LLWU_Register_Accessor_Macros LLWU - Register accessor macros + * @{ + */ + + +/* LLWU - Register accessors */ +#define LLWU_PE1_REG(base) ((base)->PE1) +#define LLWU_PE2_REG(base) ((base)->PE2) +#define LLWU_PE3_REG(base) ((base)->PE3) +#define LLWU_PE4_REG(base) ((base)->PE4) +#define LLWU_ME_REG(base) ((base)->ME) +#define LLWU_F1_REG(base) ((base)->F1) +#define LLWU_F2_REG(base) ((base)->F2) +#define LLWU_F3_REG(base) ((base)->F3) +#define LLWU_FILT1_REG(base) ((base)->FILT1) +#define LLWU_FILT2_REG(base) ((base)->FILT2) + +/*! + * @} + */ /* end of group LLWU_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- LLWU Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LLWU_Register_Masks LLWU Register Masks + * @{ + */ + +/* PE1 Bit Fields */ +#define LLWU_PE1_WUPE0_MASK 0x3u +#define LLWU_PE1_WUPE0_SHIFT 0 +#define LLWU_PE1_WUPE0(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE0_SHIFT))&LLWU_PE1_WUPE0_MASK) +#define LLWU_PE1_WUPE1_MASK 0xCu +#define LLWU_PE1_WUPE1_SHIFT 2 +#define LLWU_PE1_WUPE1(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE1_SHIFT))&LLWU_PE1_WUPE1_MASK) +#define LLWU_PE1_WUPE2_MASK 0x30u +#define LLWU_PE1_WUPE2_SHIFT 4 +#define LLWU_PE1_WUPE2(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE2_SHIFT))&LLWU_PE1_WUPE2_MASK) +#define LLWU_PE1_WUPE3_MASK 0xC0u +#define LLWU_PE1_WUPE3_SHIFT 6 +#define LLWU_PE1_WUPE3(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE3_SHIFT))&LLWU_PE1_WUPE3_MASK) +/* PE2 Bit Fields */ +#define LLWU_PE2_WUPE4_MASK 0x3u +#define LLWU_PE2_WUPE4_SHIFT 0 +#define LLWU_PE2_WUPE4(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE4_SHIFT))&LLWU_PE2_WUPE4_MASK) +#define LLWU_PE2_WUPE5_MASK 0xCu +#define LLWU_PE2_WUPE5_SHIFT 2 +#define LLWU_PE2_WUPE5(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE5_SHIFT))&LLWU_PE2_WUPE5_MASK) +#define LLWU_PE2_WUPE6_MASK 0x30u +#define LLWU_PE2_WUPE6_SHIFT 4 +#define LLWU_PE2_WUPE6(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE6_SHIFT))&LLWU_PE2_WUPE6_MASK) +#define LLWU_PE2_WUPE7_MASK 0xC0u +#define LLWU_PE2_WUPE7_SHIFT 6 +#define LLWU_PE2_WUPE7(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE7_SHIFT))&LLWU_PE2_WUPE7_MASK) +/* PE3 Bit Fields */ +#define LLWU_PE3_WUPE8_MASK 0x3u +#define LLWU_PE3_WUPE8_SHIFT 0 +#define LLWU_PE3_WUPE8(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE8_SHIFT))&LLWU_PE3_WUPE8_MASK) +#define LLWU_PE3_WUPE9_MASK 0xCu +#define LLWU_PE3_WUPE9_SHIFT 2 +#define LLWU_PE3_WUPE9(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE9_SHIFT))&LLWU_PE3_WUPE9_MASK) +#define LLWU_PE3_WUPE10_MASK 0x30u +#define LLWU_PE3_WUPE10_SHIFT 4 +#define LLWU_PE3_WUPE10(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE10_SHIFT))&LLWU_PE3_WUPE10_MASK) +#define LLWU_PE3_WUPE11_MASK 0xC0u +#define LLWU_PE3_WUPE11_SHIFT 6 +#define LLWU_PE3_WUPE11(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE11_SHIFT))&LLWU_PE3_WUPE11_MASK) +/* PE4 Bit Fields */ +#define LLWU_PE4_WUPE12_MASK 0x3u +#define LLWU_PE4_WUPE12_SHIFT 0 +#define LLWU_PE4_WUPE12(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE12_SHIFT))&LLWU_PE4_WUPE12_MASK) +#define LLWU_PE4_WUPE13_MASK 0xCu +#define LLWU_PE4_WUPE13_SHIFT 2 +#define LLWU_PE4_WUPE13(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE13_SHIFT))&LLWU_PE4_WUPE13_MASK) +#define LLWU_PE4_WUPE14_MASK 0x30u +#define LLWU_PE4_WUPE14_SHIFT 4 +#define LLWU_PE4_WUPE14(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE14_SHIFT))&LLWU_PE4_WUPE14_MASK) +#define LLWU_PE4_WUPE15_MASK 0xC0u +#define LLWU_PE4_WUPE15_SHIFT 6 +#define LLWU_PE4_WUPE15(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE15_SHIFT))&LLWU_PE4_WUPE15_MASK) +/* ME Bit Fields */ +#define LLWU_ME_WUME0_MASK 0x1u +#define LLWU_ME_WUME0_SHIFT 0 +#define LLWU_ME_WUME1_MASK 0x2u +#define LLWU_ME_WUME1_SHIFT 1 +#define LLWU_ME_WUME2_MASK 0x4u +#define LLWU_ME_WUME2_SHIFT 2 +#define LLWU_ME_WUME3_MASK 0x8u +#define LLWU_ME_WUME3_SHIFT 3 +#define LLWU_ME_WUME4_MASK 0x10u +#define LLWU_ME_WUME4_SHIFT 4 +#define LLWU_ME_WUME5_MASK 0x20u +#define LLWU_ME_WUME5_SHIFT 5 +#define LLWU_ME_WUME6_MASK 0x40u +#define LLWU_ME_WUME6_SHIFT 6 +#define LLWU_ME_WUME7_MASK 0x80u +#define LLWU_ME_WUME7_SHIFT 7 +/* F1 Bit Fields */ +#define LLWU_F1_WUF0_MASK 0x1u +#define LLWU_F1_WUF0_SHIFT 0 +#define LLWU_F1_WUF1_MASK 0x2u +#define LLWU_F1_WUF1_SHIFT 1 +#define LLWU_F1_WUF2_MASK 0x4u +#define LLWU_F1_WUF2_SHIFT 2 +#define LLWU_F1_WUF3_MASK 0x8u +#define LLWU_F1_WUF3_SHIFT 3 +#define LLWU_F1_WUF4_MASK 0x10u +#define LLWU_F1_WUF4_SHIFT 4 +#define LLWU_F1_WUF5_MASK 0x20u +#define LLWU_F1_WUF5_SHIFT 5 +#define LLWU_F1_WUF6_MASK 0x40u +#define LLWU_F1_WUF6_SHIFT 6 +#define LLWU_F1_WUF7_MASK 0x80u +#define LLWU_F1_WUF7_SHIFT 7 +/* F2 Bit Fields */ +#define LLWU_F2_WUF8_MASK 0x1u +#define LLWU_F2_WUF8_SHIFT 0 +#define LLWU_F2_WUF9_MASK 0x2u +#define LLWU_F2_WUF9_SHIFT 1 +#define LLWU_F2_WUF10_MASK 0x4u +#define LLWU_F2_WUF10_SHIFT 2 +#define LLWU_F2_WUF11_MASK 0x8u +#define LLWU_F2_WUF11_SHIFT 3 +#define LLWU_F2_WUF12_MASK 0x10u +#define LLWU_F2_WUF12_SHIFT 4 +#define LLWU_F2_WUF13_MASK 0x20u +#define LLWU_F2_WUF13_SHIFT 5 +#define LLWU_F2_WUF14_MASK 0x40u +#define LLWU_F2_WUF14_SHIFT 6 +#define LLWU_F2_WUF15_MASK 0x80u +#define LLWU_F2_WUF15_SHIFT 7 +/* F3 Bit Fields */ +#define LLWU_F3_MWUF0_MASK 0x1u +#define LLWU_F3_MWUF0_SHIFT 0 +#define LLWU_F3_MWUF1_MASK 0x2u +#define LLWU_F3_MWUF1_SHIFT 1 +#define LLWU_F3_MWUF2_MASK 0x4u +#define LLWU_F3_MWUF2_SHIFT 2 +#define LLWU_F3_MWUF3_MASK 0x8u +#define LLWU_F3_MWUF3_SHIFT 3 +#define LLWU_F3_MWUF4_MASK 0x10u +#define LLWU_F3_MWUF4_SHIFT 4 +#define LLWU_F3_MWUF5_MASK 0x20u +#define LLWU_F3_MWUF5_SHIFT 5 +#define LLWU_F3_MWUF6_MASK 0x40u +#define LLWU_F3_MWUF6_SHIFT 6 +#define LLWU_F3_MWUF7_MASK 0x80u +#define LLWU_F3_MWUF7_SHIFT 7 +/* FILT1 Bit Fields */ +#define LLWU_FILT1_FILTSEL_MASK 0xFu +#define LLWU_FILT1_FILTSEL_SHIFT 0 +#define LLWU_FILT1_FILTSEL(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT1_FILTSEL_SHIFT))&LLWU_FILT1_FILTSEL_MASK) +#define LLWU_FILT1_FILTE_MASK 0x60u +#define LLWU_FILT1_FILTE_SHIFT 5 +#define LLWU_FILT1_FILTE(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT1_FILTE_SHIFT))&LLWU_FILT1_FILTE_MASK) +#define LLWU_FILT1_FILTF_MASK 0x80u +#define LLWU_FILT1_FILTF_SHIFT 7 +/* FILT2 Bit Fields */ +#define LLWU_FILT2_FILTSEL_MASK 0xFu +#define LLWU_FILT2_FILTSEL_SHIFT 0 +#define LLWU_FILT2_FILTSEL(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT2_FILTSEL_SHIFT))&LLWU_FILT2_FILTSEL_MASK) +#define LLWU_FILT2_FILTE_MASK 0x60u +#define LLWU_FILT2_FILTE_SHIFT 5 +#define LLWU_FILT2_FILTE(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT2_FILTE_SHIFT))&LLWU_FILT2_FILTE_MASK) +#define LLWU_FILT2_FILTF_MASK 0x80u +#define LLWU_FILT2_FILTF_SHIFT 7 + +/*! + * @} + */ /* end of group LLWU_Register_Masks */ + + +/* LLWU - Peripheral instance base addresses */ +/** Peripheral LLWU base address */ +#define LLWU_BASE (0x4007C000u) +/** Peripheral LLWU base pointer */ +#define LLWU ((LLWU_Type *)LLWU_BASE) +#define LLWU_BASE_PTR (LLWU) +/** Array initializer of LLWU peripheral base addresses */ +#define LLWU_BASE_ADDRS { LLWU_BASE } +/** Array initializer of LLWU peripheral base pointers */ +#define LLWU_BASE_PTRS { LLWU } +/** Interrupt vectors for the LLWU peripheral type */ +#define LLWU_IRQS { LLW_IRQn } + +/* ---------------------------------------------------------------------------- + -- LLWU - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LLWU_Register_Accessor_Macros LLWU - Register accessor macros + * @{ + */ + + +/* LLWU - Register instance definitions */ +/* LLWU */ +#define LLWU_PE1 LLWU_PE1_REG(LLWU) +#define LLWU_PE2 LLWU_PE2_REG(LLWU) +#define LLWU_PE3 LLWU_PE3_REG(LLWU) +#define LLWU_PE4 LLWU_PE4_REG(LLWU) +#define LLWU_ME LLWU_ME_REG(LLWU) +#define LLWU_F1 LLWU_F1_REG(LLWU) +#define LLWU_F2 LLWU_F2_REG(LLWU) +#define LLWU_F3 LLWU_F3_REG(LLWU) +#define LLWU_FILT1 LLWU_FILT1_REG(LLWU) +#define LLWU_FILT2 LLWU_FILT2_REG(LLWU) + +/*! + * @} + */ /* end of group LLWU_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group LLWU_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- LPTMR Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPTMR_Peripheral_Access_Layer LPTMR Peripheral Access Layer + * @{ + */ + +/** LPTMR - Register Layout Typedef */ +typedef struct { + __IO uint32_t CSR; /**< Low Power Timer Control Status Register, offset: 0x0 */ + __IO uint32_t PSR; /**< Low Power Timer Prescale Register, offset: 0x4 */ + __IO uint32_t CMR; /**< Low Power Timer Compare Register, offset: 0x8 */ + __IO uint32_t CNR; /**< Low Power Timer Counter Register, offset: 0xC */ +} LPTMR_Type, *LPTMR_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- LPTMR - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPTMR_Register_Accessor_Macros LPTMR - Register accessor macros + * @{ + */ + + +/* LPTMR - Register accessors */ +#define LPTMR_CSR_REG(base) ((base)->CSR) +#define LPTMR_PSR_REG(base) ((base)->PSR) +#define LPTMR_CMR_REG(base) ((base)->CMR) +#define LPTMR_CNR_REG(base) ((base)->CNR) + +/*! + * @} + */ /* end of group LPTMR_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- LPTMR Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPTMR_Register_Masks LPTMR Register Masks + * @{ + */ + +/* CSR Bit Fields */ +#define LPTMR_CSR_TEN_MASK 0x1u +#define LPTMR_CSR_TEN_SHIFT 0 +#define LPTMR_CSR_TMS_MASK 0x2u +#define LPTMR_CSR_TMS_SHIFT 1 +#define LPTMR_CSR_TFC_MASK 0x4u +#define LPTMR_CSR_TFC_SHIFT 2 +#define LPTMR_CSR_TPP_MASK 0x8u +#define LPTMR_CSR_TPP_SHIFT 3 +#define LPTMR_CSR_TPS_MASK 0x30u +#define LPTMR_CSR_TPS_SHIFT 4 +#define LPTMR_CSR_TPS(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CSR_TPS_SHIFT))&LPTMR_CSR_TPS_MASK) +#define LPTMR_CSR_TIE_MASK 0x40u +#define LPTMR_CSR_TIE_SHIFT 6 +#define LPTMR_CSR_TCF_MASK 0x80u +#define LPTMR_CSR_TCF_SHIFT 7 +/* PSR Bit Fields */ +#define LPTMR_PSR_PCS_MASK 0x3u +#define LPTMR_PSR_PCS_SHIFT 0 +#define LPTMR_PSR_PCS(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_PSR_PCS_SHIFT))&LPTMR_PSR_PCS_MASK) +#define LPTMR_PSR_PBYP_MASK 0x4u +#define LPTMR_PSR_PBYP_SHIFT 2 +#define LPTMR_PSR_PRESCALE_MASK 0x78u +#define LPTMR_PSR_PRESCALE_SHIFT 3 +#define LPTMR_PSR_PRESCALE(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_PSR_PRESCALE_SHIFT))&LPTMR_PSR_PRESCALE_MASK) +/* CMR Bit Fields */ +#define LPTMR_CMR_COMPARE_MASK 0xFFFFu +#define LPTMR_CMR_COMPARE_SHIFT 0 +#define LPTMR_CMR_COMPARE(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CMR_COMPARE_SHIFT))&LPTMR_CMR_COMPARE_MASK) +/* CNR Bit Fields */ +#define LPTMR_CNR_COUNTER_MASK 0xFFFFu +#define LPTMR_CNR_COUNTER_SHIFT 0 +#define LPTMR_CNR_COUNTER(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CNR_COUNTER_SHIFT))&LPTMR_CNR_COUNTER_MASK) + +/*! + * @} + */ /* end of group LPTMR_Register_Masks */ + + +/* LPTMR - Peripheral instance base addresses */ +/** Peripheral LPTMR0 base address */ +#define LPTMR0_BASE (0x40040000u) +/** Peripheral LPTMR0 base pointer */ +#define LPTMR0 ((LPTMR_Type *)LPTMR0_BASE) +#define LPTMR0_BASE_PTR (LPTMR0) +/** Array initializer of LPTMR peripheral base addresses */ +#define LPTMR_BASE_ADDRS { LPTMR0_BASE } +/** Array initializer of LPTMR peripheral base pointers */ +#define LPTMR_BASE_PTRS { LPTMR0 } +/** Interrupt vectors for the LPTMR peripheral type */ +#define LPTMR_IRQS { LPTimer_IRQn } + +/* ---------------------------------------------------------------------------- + -- LPTMR - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPTMR_Register_Accessor_Macros LPTMR - Register accessor macros + * @{ + */ + + +/* LPTMR - Register instance definitions */ +/* LPTMR0 */ +#define LPTMR0_CSR LPTMR_CSR_REG(LPTMR0) +#define LPTMR0_PSR LPTMR_PSR_REG(LPTMR0) +#define LPTMR0_CMR LPTMR_CMR_REG(LPTMR0) +#define LPTMR0_CNR LPTMR_CNR_REG(LPTMR0) + +/*! + * @} + */ /* end of group LPTMR_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group LPTMR_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- LPUART Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPUART_Peripheral_Access_Layer LPUART Peripheral Access Layer + * @{ + */ + +/** LPUART - Register Layout Typedef */ +typedef struct { + __IO uint32_t BAUD; /**< LPUART Baud Rate Register, offset: 0x0 */ + __IO uint32_t STAT; /**< LPUART Status Register, offset: 0x4 */ + __IO uint32_t CTRL; /**< LPUART Control Register, offset: 0x8 */ + __IO uint32_t DATA; /**< LPUART Data Register, offset: 0xC */ + __IO uint32_t MATCH; /**< LPUART Match Address Register, offset: 0x10 */ + __IO uint32_t MODIR; /**< LPUART Modem IrDA Register, offset: 0x14 */ +} LPUART_Type, *LPUART_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- LPUART - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPUART_Register_Accessor_Macros LPUART - Register accessor macros + * @{ + */ + + +/* LPUART - Register accessors */ +#define LPUART_BAUD_REG(base) ((base)->BAUD) +#define LPUART_STAT_REG(base) ((base)->STAT) +#define LPUART_CTRL_REG(base) ((base)->CTRL) +#define LPUART_DATA_REG(base) ((base)->DATA) +#define LPUART_MATCH_REG(base) ((base)->MATCH) +#define LPUART_MODIR_REG(base) ((base)->MODIR) + +/*! + * @} + */ /* end of group LPUART_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- LPUART Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPUART_Register_Masks LPUART Register Masks + * @{ + */ + +/* BAUD Bit Fields */ +#define LPUART_BAUD_SBR_MASK 0x1FFFu +#define LPUART_BAUD_SBR_SHIFT 0 +#define LPUART_BAUD_SBR(x) (((uint32_t)(((uint32_t)(x))<<LPUART_BAUD_SBR_SHIFT))&LPUART_BAUD_SBR_MASK) +#define LPUART_BAUD_SBNS_MASK 0x2000u +#define LPUART_BAUD_SBNS_SHIFT 13 +#define LPUART_BAUD_RXEDGIE_MASK 0x4000u +#define LPUART_BAUD_RXEDGIE_SHIFT 14 +#define LPUART_BAUD_LBKDIE_MASK 0x8000u +#define LPUART_BAUD_LBKDIE_SHIFT 15 +#define LPUART_BAUD_RESYNCDIS_MASK 0x10000u +#define LPUART_BAUD_RESYNCDIS_SHIFT 16 +#define LPUART_BAUD_BOTHEDGE_MASK 0x20000u +#define LPUART_BAUD_BOTHEDGE_SHIFT 17 +#define LPUART_BAUD_MATCFG_MASK 0xC0000u +#define LPUART_BAUD_MATCFG_SHIFT 18 +#define LPUART_BAUD_MATCFG(x) (((uint32_t)(((uint32_t)(x))<<LPUART_BAUD_MATCFG_SHIFT))&LPUART_BAUD_MATCFG_MASK) +#define LPUART_BAUD_RDMAE_MASK 0x200000u +#define LPUART_BAUD_RDMAE_SHIFT 21 +#define LPUART_BAUD_TDMAE_MASK 0x800000u +#define LPUART_BAUD_TDMAE_SHIFT 23 +#define LPUART_BAUD_OSR_MASK 0x1F000000u +#define LPUART_BAUD_OSR_SHIFT 24 +#define LPUART_BAUD_OSR(x) (((uint32_t)(((uint32_t)(x))<<LPUART_BAUD_OSR_SHIFT))&LPUART_BAUD_OSR_MASK) +#define LPUART_BAUD_M10_MASK 0x20000000u +#define LPUART_BAUD_M10_SHIFT 29 +#define LPUART_BAUD_MAEN2_MASK 0x40000000u +#define LPUART_BAUD_MAEN2_SHIFT 30 +#define LPUART_BAUD_MAEN1_MASK 0x80000000u +#define LPUART_BAUD_MAEN1_SHIFT 31 +/* STAT Bit Fields */ +#define LPUART_STAT_MA2F_MASK 0x4000u +#define LPUART_STAT_MA2F_SHIFT 14 +#define LPUART_STAT_MA1F_MASK 0x8000u +#define LPUART_STAT_MA1F_SHIFT 15 +#define LPUART_STAT_PF_MASK 0x10000u +#define LPUART_STAT_PF_SHIFT 16 +#define LPUART_STAT_FE_MASK 0x20000u +#define LPUART_STAT_FE_SHIFT 17 +#define LPUART_STAT_NF_MASK 0x40000u +#define LPUART_STAT_NF_SHIFT 18 +#define LPUART_STAT_OR_MASK 0x80000u +#define LPUART_STAT_OR_SHIFT 19 +#define LPUART_STAT_IDLE_MASK 0x100000u +#define LPUART_STAT_IDLE_SHIFT 20 +#define LPUART_STAT_RDRF_MASK 0x200000u +#define LPUART_STAT_RDRF_SHIFT 21 +#define LPUART_STAT_TC_MASK 0x400000u +#define LPUART_STAT_TC_SHIFT 22 +#define LPUART_STAT_TDRE_MASK 0x800000u +#define LPUART_STAT_TDRE_SHIFT 23 +#define LPUART_STAT_RAF_MASK 0x1000000u +#define LPUART_STAT_RAF_SHIFT 24 +#define LPUART_STAT_LBKDE_MASK 0x2000000u +#define LPUART_STAT_LBKDE_SHIFT 25 +#define LPUART_STAT_BRK13_MASK 0x4000000u +#define LPUART_STAT_BRK13_SHIFT 26 +#define LPUART_STAT_RWUID_MASK 0x8000000u +#define LPUART_STAT_RWUID_SHIFT 27 +#define LPUART_STAT_RXINV_MASK 0x10000000u +#define LPUART_STAT_RXINV_SHIFT 28 +#define LPUART_STAT_MSBF_MASK 0x20000000u +#define LPUART_STAT_MSBF_SHIFT 29 +#define LPUART_STAT_RXEDGIF_MASK 0x40000000u +#define LPUART_STAT_RXEDGIF_SHIFT 30 +#define LPUART_STAT_LBKDIF_MASK 0x80000000u +#define LPUART_STAT_LBKDIF_SHIFT 31 +/* CTRL Bit Fields */ +#define LPUART_CTRL_PT_MASK 0x1u +#define LPUART_CTRL_PT_SHIFT 0 +#define LPUART_CTRL_PE_MASK 0x2u +#define LPUART_CTRL_PE_SHIFT 1 +#define LPUART_CTRL_ILT_MASK 0x4u +#define LPUART_CTRL_ILT_SHIFT 2 +#define LPUART_CTRL_WAKE_MASK 0x8u +#define LPUART_CTRL_WAKE_SHIFT 3 +#define LPUART_CTRL_M_MASK 0x10u +#define LPUART_CTRL_M_SHIFT 4 +#define LPUART_CTRL_RSRC_MASK 0x20u +#define LPUART_CTRL_RSRC_SHIFT 5 +#define LPUART_CTRL_DOZEEN_MASK 0x40u +#define LPUART_CTRL_DOZEEN_SHIFT 6 +#define LPUART_CTRL_LOOPS_MASK 0x80u +#define LPUART_CTRL_LOOPS_SHIFT 7 +#define LPUART_CTRL_IDLECFG_MASK 0x700u +#define LPUART_CTRL_IDLECFG_SHIFT 8 +#define LPUART_CTRL_IDLECFG(x) (((uint32_t)(((uint32_t)(x))<<LPUART_CTRL_IDLECFG_SHIFT))&LPUART_CTRL_IDLECFG_MASK) +#define LPUART_CTRL_MA2IE_MASK 0x4000u +#define LPUART_CTRL_MA2IE_SHIFT 14 +#define LPUART_CTRL_MA1IE_MASK 0x8000u +#define LPUART_CTRL_MA1IE_SHIFT 15 +#define LPUART_CTRL_SBK_MASK 0x10000u +#define LPUART_CTRL_SBK_SHIFT 16 +#define LPUART_CTRL_RWU_MASK 0x20000u +#define LPUART_CTRL_RWU_SHIFT 17 +#define LPUART_CTRL_RE_MASK 0x40000u +#define LPUART_CTRL_RE_SHIFT 18 +#define LPUART_CTRL_TE_MASK 0x80000u +#define LPUART_CTRL_TE_SHIFT 19 +#define LPUART_CTRL_ILIE_MASK 0x100000u +#define LPUART_CTRL_ILIE_SHIFT 20 +#define LPUART_CTRL_RIE_MASK 0x200000u +#define LPUART_CTRL_RIE_SHIFT 21 +#define LPUART_CTRL_TCIE_MASK 0x400000u +#define LPUART_CTRL_TCIE_SHIFT 22 +#define LPUART_CTRL_TIE_MASK 0x800000u +#define LPUART_CTRL_TIE_SHIFT 23 +#define LPUART_CTRL_PEIE_MASK 0x1000000u +#define LPUART_CTRL_PEIE_SHIFT 24 +#define LPUART_CTRL_FEIE_MASK 0x2000000u +#define LPUART_CTRL_FEIE_SHIFT 25 +#define LPUART_CTRL_NEIE_MASK 0x4000000u +#define LPUART_CTRL_NEIE_SHIFT 26 +#define LPUART_CTRL_ORIE_MASK 0x8000000u +#define LPUART_CTRL_ORIE_SHIFT 27 +#define LPUART_CTRL_TXINV_MASK 0x10000000u +#define LPUART_CTRL_TXINV_SHIFT 28 +#define LPUART_CTRL_TXDIR_MASK 0x20000000u +#define LPUART_CTRL_TXDIR_SHIFT 29 +#define LPUART_CTRL_R9T8_MASK 0x40000000u +#define LPUART_CTRL_R9T8_SHIFT 30 +#define LPUART_CTRL_R8T9_MASK 0x80000000u +#define LPUART_CTRL_R8T9_SHIFT 31 +/* DATA Bit Fields */ +#define LPUART_DATA_R0T0_MASK 0x1u +#define LPUART_DATA_R0T0_SHIFT 0 +#define LPUART_DATA_R1T1_MASK 0x2u +#define LPUART_DATA_R1T1_SHIFT 1 +#define LPUART_DATA_R2T2_MASK 0x4u +#define LPUART_DATA_R2T2_SHIFT 2 +#define LPUART_DATA_R3T3_MASK 0x8u +#define LPUART_DATA_R3T3_SHIFT 3 +#define LPUART_DATA_R4T4_MASK 0x10u +#define LPUART_DATA_R4T4_SHIFT 4 +#define LPUART_DATA_R5T5_MASK 0x20u +#define LPUART_DATA_R5T5_SHIFT 5 +#define LPUART_DATA_R6T6_MASK 0x40u +#define LPUART_DATA_R6T6_SHIFT 6 +#define LPUART_DATA_R7T7_MASK 0x80u +#define LPUART_DATA_R7T7_SHIFT 7 +#define LPUART_DATA_R8T8_MASK 0x100u +#define LPUART_DATA_R8T8_SHIFT 8 +#define LPUART_DATA_R9T9_MASK 0x200u +#define LPUART_DATA_R9T9_SHIFT 9 +#define LPUART_DATA_IDLINE_MASK 0x800u +#define LPUART_DATA_IDLINE_SHIFT 11 +#define LPUART_DATA_RXEMPT_MASK 0x1000u +#define LPUART_DATA_RXEMPT_SHIFT 12 +#define LPUART_DATA_FRETSC_MASK 0x2000u +#define LPUART_DATA_FRETSC_SHIFT 13 +#define LPUART_DATA_PARITYE_MASK 0x4000u +#define LPUART_DATA_PARITYE_SHIFT 14 +#define LPUART_DATA_NOISY_MASK 0x8000u +#define LPUART_DATA_NOISY_SHIFT 15 +/* MATCH Bit Fields */ +#define LPUART_MATCH_MA1_MASK 0x3FFu +#define LPUART_MATCH_MA1_SHIFT 0 +#define LPUART_MATCH_MA1(x) (((uint32_t)(((uint32_t)(x))<<LPUART_MATCH_MA1_SHIFT))&LPUART_MATCH_MA1_MASK) +#define LPUART_MATCH_MA2_MASK 0x3FF0000u +#define LPUART_MATCH_MA2_SHIFT 16 +#define LPUART_MATCH_MA2(x) (((uint32_t)(((uint32_t)(x))<<LPUART_MATCH_MA2_SHIFT))&LPUART_MATCH_MA2_MASK) +/* MODIR Bit Fields */ +#define LPUART_MODIR_TXCTSE_MASK 0x1u +#define LPUART_MODIR_TXCTSE_SHIFT 0 +#define LPUART_MODIR_TXRTSE_MASK 0x2u +#define LPUART_MODIR_TXRTSE_SHIFT 1 +#define LPUART_MODIR_TXRTSPOL_MASK 0x4u +#define LPUART_MODIR_TXRTSPOL_SHIFT 2 +#define LPUART_MODIR_RXRTSE_MASK 0x8u +#define LPUART_MODIR_RXRTSE_SHIFT 3 +#define LPUART_MODIR_TXCTSC_MASK 0x10u +#define LPUART_MODIR_TXCTSC_SHIFT 4 +#define LPUART_MODIR_TXCTSSRC_MASK 0x20u +#define LPUART_MODIR_TXCTSSRC_SHIFT 5 +#define LPUART_MODIR_TNP_MASK 0x30000u +#define LPUART_MODIR_TNP_SHIFT 16 +#define LPUART_MODIR_TNP(x) (((uint32_t)(((uint32_t)(x))<<LPUART_MODIR_TNP_SHIFT))&LPUART_MODIR_TNP_MASK) +#define LPUART_MODIR_IREN_MASK 0x40000u +#define LPUART_MODIR_IREN_SHIFT 18 + +/*! + * @} + */ /* end of group LPUART_Register_Masks */ + + +/* LPUART - Peripheral instance base addresses */ +/** Peripheral LPUART0 base address */ +#define LPUART0_BASE (0x4002A000u) +/** Peripheral LPUART0 base pointer */ +#define LPUART0 ((LPUART_Type *)LPUART0_BASE) +#define LPUART0_BASE_PTR (LPUART0) +/** Array initializer of LPUART peripheral base addresses */ +#define LPUART_BASE_ADDRS { LPUART0_BASE } +/** Array initializer of LPUART peripheral base pointers */ +#define LPUART_BASE_PTRS { LPUART0 } +/** Interrupt vectors for the LPUART peripheral type */ +#define LPUART_RX_TX_IRQS { LPUART0_IRQn } +#define LPUART_ERR_IRQS { LPUART0_IRQn } + +/* ---------------------------------------------------------------------------- + -- LPUART - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup LPUART_Register_Accessor_Macros LPUART - Register accessor macros + * @{ + */ + + +/* LPUART - Register instance definitions */ +/* LPUART0 */ +#define LPUART0_BAUD LPUART_BAUD_REG(LPUART0) +#define LPUART0_STAT LPUART_STAT_REG(LPUART0) +#define LPUART0_CTRL LPUART_CTRL_REG(LPUART0) +#define LPUART0_DATA LPUART_DATA_REG(LPUART0) +#define LPUART0_MATCH LPUART_MATCH_REG(LPUART0) +#define LPUART0_MODIR LPUART_MODIR_REG(LPUART0) + +/*! + * @} + */ /* end of group LPUART_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group LPUART_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- MCG Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCG_Peripheral_Access_Layer MCG Peripheral Access Layer + * @{ + */ + +/** MCG - Register Layout Typedef */ +typedef struct { + __IO uint8_t C1; /**< MCG Control 1 Register, offset: 0x0 */ + __IO uint8_t C2; /**< MCG Control 2 Register, offset: 0x1 */ + __IO uint8_t C3; /**< MCG Control 3 Register, offset: 0x2 */ + __IO uint8_t C4; /**< MCG Control 4 Register, offset: 0x3 */ + __IO uint8_t C5; /**< MCG Control 5 Register, offset: 0x4 */ + __IO uint8_t C6; /**< MCG Control 6 Register, offset: 0x5 */ + __IO uint8_t S; /**< MCG Status Register, offset: 0x6 */ + uint8_t RESERVED_0[1]; + __IO uint8_t SC; /**< MCG Status and Control Register, offset: 0x8 */ + uint8_t RESERVED_1[1]; + __IO uint8_t ATCVH; /**< MCG Auto Trim Compare Value High Register, offset: 0xA */ + __IO uint8_t ATCVL; /**< MCG Auto Trim Compare Value Low Register, offset: 0xB */ + __IO uint8_t C7; /**< MCG Control 7 Register, offset: 0xC */ + __IO uint8_t C8; /**< MCG Control 8 Register, offset: 0xD */ +} MCG_Type, *MCG_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- MCG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCG_Register_Accessor_Macros MCG - Register accessor macros + * @{ + */ + + +/* MCG - Register accessors */ +#define MCG_C1_REG(base) ((base)->C1) +#define MCG_C2_REG(base) ((base)->C2) +#define MCG_C3_REG(base) ((base)->C3) +#define MCG_C4_REG(base) ((base)->C4) +#define MCG_C5_REG(base) ((base)->C5) +#define MCG_C6_REG(base) ((base)->C6) +#define MCG_S_REG(base) ((base)->S) +#define MCG_SC_REG(base) ((base)->SC) +#define MCG_ATCVH_REG(base) ((base)->ATCVH) +#define MCG_ATCVL_REG(base) ((base)->ATCVL) +#define MCG_C7_REG(base) ((base)->C7) +#define MCG_C8_REG(base) ((base)->C8) + +/*! + * @} + */ /* end of group MCG_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- MCG Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCG_Register_Masks MCG Register Masks + * @{ + */ + +/* C1 Bit Fields */ +#define MCG_C1_IREFSTEN_MASK 0x1u +#define MCG_C1_IREFSTEN_SHIFT 0 +#define MCG_C1_IRCLKEN_MASK 0x2u +#define MCG_C1_IRCLKEN_SHIFT 1 +#define MCG_C1_IREFS_MASK 0x4u +#define MCG_C1_IREFS_SHIFT 2 +#define MCG_C1_FRDIV_MASK 0x38u +#define MCG_C1_FRDIV_SHIFT 3 +#define MCG_C1_FRDIV(x) (((uint8_t)(((uint8_t)(x))<<MCG_C1_FRDIV_SHIFT))&MCG_C1_FRDIV_MASK) +#define MCG_C1_CLKS_MASK 0xC0u +#define MCG_C1_CLKS_SHIFT 6 +#define MCG_C1_CLKS(x) (((uint8_t)(((uint8_t)(x))<<MCG_C1_CLKS_SHIFT))&MCG_C1_CLKS_MASK) +/* C2 Bit Fields */ +#define MCG_C2_IRCS_MASK 0x1u +#define MCG_C2_IRCS_SHIFT 0 +#define MCG_C2_LP_MASK 0x2u +#define MCG_C2_LP_SHIFT 1 +#define MCG_C2_EREFS_MASK 0x4u +#define MCG_C2_EREFS_SHIFT 2 +#define MCG_C2_HGO_MASK 0x8u +#define MCG_C2_HGO_SHIFT 3 +#define MCG_C2_RANGE_MASK 0x30u +#define MCG_C2_RANGE_SHIFT 4 +#define MCG_C2_RANGE(x) (((uint8_t)(((uint8_t)(x))<<MCG_C2_RANGE_SHIFT))&MCG_C2_RANGE_MASK) +#define MCG_C2_FCFTRIM_MASK 0x40u +#define MCG_C2_FCFTRIM_SHIFT 6 +#define MCG_C2_LOCRE0_MASK 0x80u +#define MCG_C2_LOCRE0_SHIFT 7 +/* C3 Bit Fields */ +#define MCG_C3_SCTRIM_MASK 0xFFu +#define MCG_C3_SCTRIM_SHIFT 0 +#define MCG_C3_SCTRIM(x) (((uint8_t)(((uint8_t)(x))<<MCG_C3_SCTRIM_SHIFT))&MCG_C3_SCTRIM_MASK) +/* C4 Bit Fields */ +#define MCG_C4_SCFTRIM_MASK 0x1u +#define MCG_C4_SCFTRIM_SHIFT 0 +#define MCG_C4_FCTRIM_MASK 0x1Eu +#define MCG_C4_FCTRIM_SHIFT 1 +#define MCG_C4_FCTRIM(x) (((uint8_t)(((uint8_t)(x))<<MCG_C4_FCTRIM_SHIFT))&MCG_C4_FCTRIM_MASK) +#define MCG_C4_DRST_DRS_MASK 0x60u +#define MCG_C4_DRST_DRS_SHIFT 5 +#define MCG_C4_DRST_DRS(x) (((uint8_t)(((uint8_t)(x))<<MCG_C4_DRST_DRS_SHIFT))&MCG_C4_DRST_DRS_MASK) +#define MCG_C4_DMX32_MASK 0x80u +#define MCG_C4_DMX32_SHIFT 7 +/* C5 Bit Fields */ +#define MCG_C5_PRDIV0_MASK 0x1Fu +#define MCG_C5_PRDIV0_SHIFT 0 +#define MCG_C5_PRDIV0(x) (((uint8_t)(((uint8_t)(x))<<MCG_C5_PRDIV0_SHIFT))&MCG_C5_PRDIV0_MASK) +#define MCG_C5_PLLSTEN0_MASK 0x20u +#define MCG_C5_PLLSTEN0_SHIFT 5 +#define MCG_C5_PLLCLKEN0_MASK 0x40u +#define MCG_C5_PLLCLKEN0_SHIFT 6 +/* C6 Bit Fields */ +#define MCG_C6_VDIV0_MASK 0x1Fu +#define MCG_C6_VDIV0_SHIFT 0 +#define MCG_C6_VDIV0(x) (((uint8_t)(((uint8_t)(x))<<MCG_C6_VDIV0_SHIFT))&MCG_C6_VDIV0_MASK) +#define MCG_C6_CME0_MASK 0x20u +#define MCG_C6_CME0_SHIFT 5 +#define MCG_C6_PLLS_MASK 0x40u +#define MCG_C6_PLLS_SHIFT 6 +#define MCG_C6_LOLIE0_MASK 0x80u +#define MCG_C6_LOLIE0_SHIFT 7 +/* S Bit Fields */ +#define MCG_S_IRCST_MASK 0x1u +#define MCG_S_IRCST_SHIFT 0 +#define MCG_S_OSCINIT0_MASK 0x2u +#define MCG_S_OSCINIT0_SHIFT 1 +#define MCG_S_CLKST_MASK 0xCu +#define MCG_S_CLKST_SHIFT 2 +#define MCG_S_CLKST(x) (((uint8_t)(((uint8_t)(x))<<MCG_S_CLKST_SHIFT))&MCG_S_CLKST_MASK) +#define MCG_S_IREFST_MASK 0x10u +#define MCG_S_IREFST_SHIFT 4 +#define MCG_S_PLLST_MASK 0x20u +#define MCG_S_PLLST_SHIFT 5 +#define MCG_S_LOCK0_MASK 0x40u +#define MCG_S_LOCK0_SHIFT 6 +#define MCG_S_LOLS0_MASK 0x80u +#define MCG_S_LOLS0_SHIFT 7 +/* SC Bit Fields */ +#define MCG_SC_LOCS0_MASK 0x1u +#define MCG_SC_LOCS0_SHIFT 0 +#define MCG_SC_FCRDIV_MASK 0xEu +#define MCG_SC_FCRDIV_SHIFT 1 +#define MCG_SC_FCRDIV(x) (((uint8_t)(((uint8_t)(x))<<MCG_SC_FCRDIV_SHIFT))&MCG_SC_FCRDIV_MASK) +#define MCG_SC_FLTPRSRV_MASK 0x10u +#define MCG_SC_FLTPRSRV_SHIFT 4 +#define MCG_SC_ATMF_MASK 0x20u +#define MCG_SC_ATMF_SHIFT 5 +#define MCG_SC_ATMS_MASK 0x40u +#define MCG_SC_ATMS_SHIFT 6 +#define MCG_SC_ATME_MASK 0x80u +#define MCG_SC_ATME_SHIFT 7 +/* ATCVH Bit Fields */ +#define MCG_ATCVH_ATCVH_MASK 0xFFu +#define MCG_ATCVH_ATCVH_SHIFT 0 +#define MCG_ATCVH_ATCVH(x) (((uint8_t)(((uint8_t)(x))<<MCG_ATCVH_ATCVH_SHIFT))&MCG_ATCVH_ATCVH_MASK) +/* ATCVL Bit Fields */ +#define MCG_ATCVL_ATCVL_MASK 0xFFu +#define MCG_ATCVL_ATCVL_SHIFT 0 +#define MCG_ATCVL_ATCVL(x) (((uint8_t)(((uint8_t)(x))<<MCG_ATCVL_ATCVL_SHIFT))&MCG_ATCVL_ATCVL_MASK) +/* C7 Bit Fields */ +#define MCG_C7_OSCSEL_MASK 0x3u +#define MCG_C7_OSCSEL_SHIFT 0 +#define MCG_C7_OSCSEL(x) (((uint8_t)(((uint8_t)(x))<<MCG_C7_OSCSEL_SHIFT))&MCG_C7_OSCSEL_MASK) +/* C8 Bit Fields */ +#define MCG_C8_LOCS1_MASK 0x1u +#define MCG_C8_LOCS1_SHIFT 0 +#define MCG_C8_CME1_MASK 0x20u +#define MCG_C8_CME1_SHIFT 5 +#define MCG_C8_LOLRE_MASK 0x40u +#define MCG_C8_LOLRE_SHIFT 6 +#define MCG_C8_LOCRE1_MASK 0x80u +#define MCG_C8_LOCRE1_SHIFT 7 + +/*! + * @} + */ /* end of group MCG_Register_Masks */ + + +/* MCG - Peripheral instance base addresses */ +/** Peripheral MCG base address */ +#define MCG_BASE (0x40064000u) +/** Peripheral MCG base pointer */ +#define MCG ((MCG_Type *)MCG_BASE) +#define MCG_BASE_PTR (MCG) +/** Array initializer of MCG peripheral base addresses */ +#define MCG_BASE_ADDRS { MCG_BASE } +/** Array initializer of MCG peripheral base pointers */ +#define MCG_BASE_PTRS { MCG } + +/* ---------------------------------------------------------------------------- + -- MCG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCG_Register_Accessor_Macros MCG - Register accessor macros + * @{ + */ + + +/* MCG - Register instance definitions */ +/* MCG */ +#define MCG_C1 MCG_C1_REG(MCG) +#define MCG_C2 MCG_C2_REG(MCG) +#define MCG_C3 MCG_C3_REG(MCG) +#define MCG_C4 MCG_C4_REG(MCG) +#define MCG_C5 MCG_C5_REG(MCG) +#define MCG_C6 MCG_C6_REG(MCG) +#define MCG_S MCG_S_REG(MCG) +#define MCG_SC MCG_SC_REG(MCG) +#define MCG_ATCVH MCG_ATCVH_REG(MCG) +#define MCG_ATCVL MCG_ATCVL_REG(MCG) +#define MCG_C7 MCG_C7_REG(MCG) +#define MCG_C8 MCG_C8_REG(MCG) + +/*! + * @} + */ /* end of group MCG_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group MCG_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- MCM Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCM_Peripheral_Access_Layer MCM Peripheral Access Layer + * @{ + */ + +/** MCM - Register Layout Typedef */ +typedef struct { + uint8_t RESERVED_0[8]; + __I uint16_t PLASC; /**< Crossbar Switch (AXBS) Slave Configuration, offset: 0x8 */ + __I uint16_t PLAMC; /**< Crossbar Switch (AXBS) Master Configuration, offset: 0xA */ + __IO uint32_t PLACR; /**< Crossbar Switch (AXBS) Control Register, offset: 0xC */ + __IO uint32_t ISCR; /**< Interrupt Status and Control Register, offset: 0x10 */ + uint8_t RESERVED_1[44]; + __IO uint32_t CPO; /**< Compute Operation Control Register, offset: 0x40 */ +} MCM_Type, *MCM_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- MCM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCM_Register_Accessor_Macros MCM - Register accessor macros + * @{ + */ + + +/* MCM - Register accessors */ +#define MCM_PLASC_REG(base) ((base)->PLASC) +#define MCM_PLAMC_REG(base) ((base)->PLAMC) +#define MCM_PLACR_REG(base) ((base)->PLACR) +#define MCM_ISCR_REG(base) ((base)->ISCR) +#define MCM_CPO_REG(base) ((base)->CPO) + +/*! + * @} + */ /* end of group MCM_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- MCM Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCM_Register_Masks MCM Register Masks + * @{ + */ + +/* PLASC Bit Fields */ +#define MCM_PLASC_ASC_MASK 0xFFu +#define MCM_PLASC_ASC_SHIFT 0 +#define MCM_PLASC_ASC(x) (((uint16_t)(((uint16_t)(x))<<MCM_PLASC_ASC_SHIFT))&MCM_PLASC_ASC_MASK) +/* PLAMC Bit Fields */ +#define MCM_PLAMC_AMC_MASK 0xFFu +#define MCM_PLAMC_AMC_SHIFT 0 +#define MCM_PLAMC_AMC(x) (((uint16_t)(((uint16_t)(x))<<MCM_PLAMC_AMC_SHIFT))&MCM_PLAMC_AMC_MASK) +/* PLACR Bit Fields */ +#define MCM_PLACR_ARB_MASK 0x200u +#define MCM_PLACR_ARB_SHIFT 9 +/* ISCR Bit Fields */ +#define MCM_ISCR_FIOC_MASK 0x100u +#define MCM_ISCR_FIOC_SHIFT 8 +#define MCM_ISCR_FDZC_MASK 0x200u +#define MCM_ISCR_FDZC_SHIFT 9 +#define MCM_ISCR_FOFC_MASK 0x400u +#define MCM_ISCR_FOFC_SHIFT 10 +#define MCM_ISCR_FUFC_MASK 0x800u +#define MCM_ISCR_FUFC_SHIFT 11 +#define MCM_ISCR_FIXC_MASK 0x1000u +#define MCM_ISCR_FIXC_SHIFT 12 +#define MCM_ISCR_FIDC_MASK 0x8000u +#define MCM_ISCR_FIDC_SHIFT 15 +#define MCM_ISCR_FIOCE_MASK 0x1000000u +#define MCM_ISCR_FIOCE_SHIFT 24 +#define MCM_ISCR_FDZCE_MASK 0x2000000u +#define MCM_ISCR_FDZCE_SHIFT 25 +#define MCM_ISCR_FOFCE_MASK 0x4000000u +#define MCM_ISCR_FOFCE_SHIFT 26 +#define MCM_ISCR_FUFCE_MASK 0x8000000u +#define MCM_ISCR_FUFCE_SHIFT 27 +#define MCM_ISCR_FIXCE_MASK 0x10000000u +#define MCM_ISCR_FIXCE_SHIFT 28 +#define MCM_ISCR_FIDCE_MASK 0x80000000u +#define MCM_ISCR_FIDCE_SHIFT 31 +/* CPO Bit Fields */ +#define MCM_CPO_CPOREQ_MASK 0x1u +#define MCM_CPO_CPOREQ_SHIFT 0 +#define MCM_CPO_CPOACK_MASK 0x2u +#define MCM_CPO_CPOACK_SHIFT 1 +#define MCM_CPO_CPOWOI_MASK 0x4u +#define MCM_CPO_CPOWOI_SHIFT 2 + +/*! + * @} + */ /* end of group MCM_Register_Masks */ + + +/* MCM - Peripheral instance base addresses */ +/** Peripheral MCM base address */ +#define MCM_BASE (0xE0080000u) +/** Peripheral MCM base pointer */ +#define MCM ((MCM_Type *)MCM_BASE) +#define MCM_BASE_PTR (MCM) +/** Array initializer of MCM peripheral base addresses */ +#define MCM_BASE_ADDRS { MCM_BASE } +/** Array initializer of MCM peripheral base pointers */ +#define MCM_BASE_PTRS { MCM } + +/* ---------------------------------------------------------------------------- + -- MCM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup MCM_Register_Accessor_Macros MCM - Register accessor macros + * @{ + */ + + +/* MCM - Register instance definitions */ +/* MCM */ +#define MCM_PLASC MCM_PLASC_REG(MCM) +#define MCM_PLAMC MCM_PLAMC_REG(MCM) +#define MCM_PLACR MCM_PLACR_REG(MCM) +#define MCM_ISCR MCM_ISCR_REG(MCM) +#define MCM_CPO MCM_CPO_REG(MCM) + +/*! + * @} + */ /* end of group MCM_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group MCM_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- NV Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup NV_Peripheral_Access_Layer NV Peripheral Access Layer + * @{ + */ + +/** NV - Register Layout Typedef */ +typedef struct { + __I uint8_t BACKKEY3; /**< Backdoor Comparison Key 3., offset: 0x0 */ + __I uint8_t BACKKEY2; /**< Backdoor Comparison Key 2., offset: 0x1 */ + __I uint8_t BACKKEY1; /**< Backdoor Comparison Key 1., offset: 0x2 */ + __I uint8_t BACKKEY0; /**< Backdoor Comparison Key 0., offset: 0x3 */ + __I uint8_t BACKKEY7; /**< Backdoor Comparison Key 7., offset: 0x4 */ + __I uint8_t BACKKEY6; /**< Backdoor Comparison Key 6., offset: 0x5 */ + __I uint8_t BACKKEY5; /**< Backdoor Comparison Key 5., offset: 0x6 */ + __I uint8_t BACKKEY4; /**< Backdoor Comparison Key 4., offset: 0x7 */ + __I uint8_t FPROT3; /**< Non-volatile P-Flash Protection 1 - Low Register, offset: 0x8 */ + __I uint8_t FPROT2; /**< Non-volatile P-Flash Protection 1 - High Register, offset: 0x9 */ + __I uint8_t FPROT1; /**< Non-volatile P-Flash Protection 0 - Low Register, offset: 0xA */ + __I uint8_t FPROT0; /**< Non-volatile P-Flash Protection 0 - High Register, offset: 0xB */ + __I uint8_t FSEC; /**< Non-volatile Flash Security Register, offset: 0xC */ + __I uint8_t FOPT; /**< Non-volatile Flash Option Register, offset: 0xD */ +} NV_Type, *NV_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- NV - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup NV_Register_Accessor_Macros NV - Register accessor macros + * @{ + */ + + +/* NV - Register accessors */ +#define NV_BACKKEY3_REG(base) ((base)->BACKKEY3) +#define NV_BACKKEY2_REG(base) ((base)->BACKKEY2) +#define NV_BACKKEY1_REG(base) ((base)->BACKKEY1) +#define NV_BACKKEY0_REG(base) ((base)->BACKKEY0) +#define NV_BACKKEY7_REG(base) ((base)->BACKKEY7) +#define NV_BACKKEY6_REG(base) ((base)->BACKKEY6) +#define NV_BACKKEY5_REG(base) ((base)->BACKKEY5) +#define NV_BACKKEY4_REG(base) ((base)->BACKKEY4) +#define NV_FPROT3_REG(base) ((base)->FPROT3) +#define NV_FPROT2_REG(base) ((base)->FPROT2) +#define NV_FPROT1_REG(base) ((base)->FPROT1) +#define NV_FPROT0_REG(base) ((base)->FPROT0) +#define NV_FSEC_REG(base) ((base)->FSEC) +#define NV_FOPT_REG(base) ((base)->FOPT) + +/*! + * @} + */ /* end of group NV_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- NV Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup NV_Register_Masks NV Register Masks + * @{ + */ + +/* BACKKEY3 Bit Fields */ +#define NV_BACKKEY3_KEY_MASK 0xFFu +#define NV_BACKKEY3_KEY_SHIFT 0 +#define NV_BACKKEY3_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY3_KEY_SHIFT))&NV_BACKKEY3_KEY_MASK) +/* BACKKEY2 Bit Fields */ +#define NV_BACKKEY2_KEY_MASK 0xFFu +#define NV_BACKKEY2_KEY_SHIFT 0 +#define NV_BACKKEY2_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY2_KEY_SHIFT))&NV_BACKKEY2_KEY_MASK) +/* BACKKEY1 Bit Fields */ +#define NV_BACKKEY1_KEY_MASK 0xFFu +#define NV_BACKKEY1_KEY_SHIFT 0 +#define NV_BACKKEY1_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY1_KEY_SHIFT))&NV_BACKKEY1_KEY_MASK) +/* BACKKEY0 Bit Fields */ +#define NV_BACKKEY0_KEY_MASK 0xFFu +#define NV_BACKKEY0_KEY_SHIFT 0 +#define NV_BACKKEY0_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY0_KEY_SHIFT))&NV_BACKKEY0_KEY_MASK) +/* BACKKEY7 Bit Fields */ +#define NV_BACKKEY7_KEY_MASK 0xFFu +#define NV_BACKKEY7_KEY_SHIFT 0 +#define NV_BACKKEY7_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY7_KEY_SHIFT))&NV_BACKKEY7_KEY_MASK) +/* BACKKEY6 Bit Fields */ +#define NV_BACKKEY6_KEY_MASK 0xFFu +#define NV_BACKKEY6_KEY_SHIFT 0 +#define NV_BACKKEY6_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY6_KEY_SHIFT))&NV_BACKKEY6_KEY_MASK) +/* BACKKEY5 Bit Fields */ +#define NV_BACKKEY5_KEY_MASK 0xFFu +#define NV_BACKKEY5_KEY_SHIFT 0 +#define NV_BACKKEY5_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY5_KEY_SHIFT))&NV_BACKKEY5_KEY_MASK) +/* BACKKEY4 Bit Fields */ +#define NV_BACKKEY4_KEY_MASK 0xFFu +#define NV_BACKKEY4_KEY_SHIFT 0 +#define NV_BACKKEY4_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY4_KEY_SHIFT))&NV_BACKKEY4_KEY_MASK) +/* FPROT3 Bit Fields */ +#define NV_FPROT3_PROT_MASK 0xFFu +#define NV_FPROT3_PROT_SHIFT 0 +#define NV_FPROT3_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT3_PROT_SHIFT))&NV_FPROT3_PROT_MASK) +/* FPROT2 Bit Fields */ +#define NV_FPROT2_PROT_MASK 0xFFu +#define NV_FPROT2_PROT_SHIFT 0 +#define NV_FPROT2_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT2_PROT_SHIFT))&NV_FPROT2_PROT_MASK) +/* FPROT1 Bit Fields */ +#define NV_FPROT1_PROT_MASK 0xFFu +#define NV_FPROT1_PROT_SHIFT 0 +#define NV_FPROT1_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT1_PROT_SHIFT))&NV_FPROT1_PROT_MASK) +/* FPROT0 Bit Fields */ +#define NV_FPROT0_PROT_MASK 0xFFu +#define NV_FPROT0_PROT_SHIFT 0 +#define NV_FPROT0_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT0_PROT_SHIFT))&NV_FPROT0_PROT_MASK) +/* FSEC Bit Fields */ +#define NV_FSEC_SEC_MASK 0x3u +#define NV_FSEC_SEC_SHIFT 0 +#define NV_FSEC_SEC(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_SEC_SHIFT))&NV_FSEC_SEC_MASK) +#define NV_FSEC_FSLACC_MASK 0xCu +#define NV_FSEC_FSLACC_SHIFT 2 +#define NV_FSEC_FSLACC(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_FSLACC_SHIFT))&NV_FSEC_FSLACC_MASK) +#define NV_FSEC_MEEN_MASK 0x30u +#define NV_FSEC_MEEN_SHIFT 4 +#define NV_FSEC_MEEN(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_MEEN_SHIFT))&NV_FSEC_MEEN_MASK) +#define NV_FSEC_KEYEN_MASK 0xC0u +#define NV_FSEC_KEYEN_SHIFT 6 +#define NV_FSEC_KEYEN(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_KEYEN_SHIFT))&NV_FSEC_KEYEN_MASK) +/* FOPT Bit Fields */ +#define NV_FOPT_LPBOOT_MASK 0x1u +#define NV_FOPT_LPBOOT_SHIFT 0 +#define NV_FOPT_EZPORT_DIS_MASK 0x2u +#define NV_FOPT_EZPORT_DIS_SHIFT 1 +#define NV_FOPT_NMI_DIS_MASK 0x4u +#define NV_FOPT_NMI_DIS_SHIFT 2 +#define NV_FOPT_FAST_INIT_MASK 0x20u +#define NV_FOPT_FAST_INIT_SHIFT 5 + +/*! + * @} + */ /* end of group NV_Register_Masks */ + + +/* NV - Peripheral instance base addresses */ +/** Peripheral FTFA_FlashConfig base address */ +#define FTFA_FlashConfig_BASE (0x400u) +/** Peripheral FTFA_FlashConfig base pointer */ +#define FTFA_FlashConfig ((NV_Type *)FTFA_FlashConfig_BASE) +#define FTFA_FlashConfig_BASE_PTR (FTFA_FlashConfig) +/** Array initializer of NV peripheral base addresses */ +#define NV_BASE_ADDRS { FTFA_FlashConfig_BASE } +/** Array initializer of NV peripheral base pointers */ +#define NV_BASE_PTRS { FTFA_FlashConfig } + +/* ---------------------------------------------------------------------------- + -- NV - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup NV_Register_Accessor_Macros NV - Register accessor macros + * @{ + */ + + +/* NV - Register instance definitions */ +/* FTFA_FlashConfig */ +#define NV_BACKKEY3 NV_BACKKEY3_REG(FTFA_FlashConfig) +#define NV_BACKKEY2 NV_BACKKEY2_REG(FTFA_FlashConfig) +#define NV_BACKKEY1 NV_BACKKEY1_REG(FTFA_FlashConfig) +#define NV_BACKKEY0 NV_BACKKEY0_REG(FTFA_FlashConfig) +#define NV_BACKKEY7 NV_BACKKEY7_REG(FTFA_FlashConfig) +#define NV_BACKKEY6 NV_BACKKEY6_REG(FTFA_FlashConfig) +#define NV_BACKKEY5 NV_BACKKEY5_REG(FTFA_FlashConfig) +#define NV_BACKKEY4 NV_BACKKEY4_REG(FTFA_FlashConfig) +#define NV_FPROT3 NV_FPROT3_REG(FTFA_FlashConfig) +#define NV_FPROT2 NV_FPROT2_REG(FTFA_FlashConfig) +#define NV_FPROT1 NV_FPROT1_REG(FTFA_FlashConfig) +#define NV_FPROT0 NV_FPROT0_REG(FTFA_FlashConfig) +#define NV_FSEC NV_FSEC_REG(FTFA_FlashConfig) +#define NV_FOPT NV_FOPT_REG(FTFA_FlashConfig) + +/*! + * @} + */ /* end of group NV_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group NV_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- OSC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup OSC_Peripheral_Access_Layer OSC Peripheral Access Layer + * @{ + */ + +/** OSC - Register Layout Typedef */ +typedef struct { + __IO uint8_t CR; /**< OSC Control Register, offset: 0x0 */ + uint8_t RESERVED_0[1]; + __IO uint8_t DIV; /**< OSC_DIV, offset: 0x2 */ +} OSC_Type, *OSC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- OSC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup OSC_Register_Accessor_Macros OSC - Register accessor macros + * @{ + */ + + +/* OSC - Register accessors */ +#define OSC_CR_REG(base) ((base)->CR) +#define OSC_DIV_REG(base) ((base)->DIV) + +/*! + * @} + */ /* end of group OSC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- OSC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup OSC_Register_Masks OSC Register Masks + * @{ + */ + +/* CR Bit Fields */ +#define OSC_CR_SC16P_MASK 0x1u +#define OSC_CR_SC16P_SHIFT 0 +#define OSC_CR_SC8P_MASK 0x2u +#define OSC_CR_SC8P_SHIFT 1 +#define OSC_CR_SC4P_MASK 0x4u +#define OSC_CR_SC4P_SHIFT 2 +#define OSC_CR_SC2P_MASK 0x8u +#define OSC_CR_SC2P_SHIFT 3 +#define OSC_CR_EREFSTEN_MASK 0x20u +#define OSC_CR_EREFSTEN_SHIFT 5 +#define OSC_CR_ERCLKEN_MASK 0x80u +#define OSC_CR_ERCLKEN_SHIFT 7 +/* DIV Bit Fields */ +#define OSC_DIV_ERPS_MASK 0xC0u +#define OSC_DIV_ERPS_SHIFT 6 +#define OSC_DIV_ERPS(x) (((uint8_t)(((uint8_t)(x))<<OSC_DIV_ERPS_SHIFT))&OSC_DIV_ERPS_MASK) + +/*! + * @} + */ /* end of group OSC_Register_Masks */ + + +/* OSC - Peripheral instance base addresses */ +/** Peripheral OSC base address */ +#define OSC_BASE (0x40065000u) +/** Peripheral OSC base pointer */ +#define OSC ((OSC_Type *)OSC_BASE) +#define OSC_BASE_PTR (OSC) +/** Array initializer of OSC peripheral base addresses */ +#define OSC_BASE_ADDRS { OSC_BASE } +/** Array initializer of OSC peripheral base pointers */ +#define OSC_BASE_PTRS { OSC } + +/* ---------------------------------------------------------------------------- + -- OSC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup OSC_Register_Accessor_Macros OSC - Register accessor macros + * @{ + */ + + +/* OSC - Register instance definitions */ +/* OSC */ +#define OSC_CR OSC_CR_REG(OSC) +#define OSC_DIV OSC_DIV_REG(OSC) + +/*! + * @} + */ /* end of group OSC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group OSC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- PDB Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PDB_Peripheral_Access_Layer PDB Peripheral Access Layer + * @{ + */ + +/** PDB - Register Layout Typedef */ +typedef struct { + __IO uint32_t SC; /**< Status and Control register, offset: 0x0 */ + __IO uint32_t MOD; /**< Modulus register, offset: 0x4 */ + __I uint32_t CNT; /**< Counter register, offset: 0x8 */ + __IO uint32_t IDLY; /**< Interrupt Delay register, offset: 0xC */ + struct { /* offset: 0x10, array step: 0x28 */ + __IO uint32_t C1; /**< Channel n Control register 1, array offset: 0x10, array step: 0x28 */ + __IO uint32_t S; /**< Channel n Status register, array offset: 0x14, array step: 0x28 */ + __IO uint32_t DLY[2]; /**< Channel n Delay 0 register..Channel n Delay 1 register, array offset: 0x18, array step: index*0x28, index2*0x4 */ + uint8_t RESERVED_0[24]; + } CH[2]; + uint8_t RESERVED_0[240]; + struct { /* offset: 0x150, array step: 0x8 */ + __IO uint32_t INTC; /**< DAC Interval Trigger n Control register, array offset: 0x150, array step: 0x8 */ + __IO uint32_t INT; /**< DAC Interval n register, array offset: 0x154, array step: 0x8 */ + } DAC[2]; + uint8_t RESERVED_1[48]; + __IO uint32_t POEN; /**< Pulse-Out n Enable register, offset: 0x190 */ + __IO uint32_t PODLY[2]; /**< Pulse-Out n Delay register, array offset: 0x194, array step: 0x4 */ +} PDB_Type, *PDB_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- PDB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PDB_Register_Accessor_Macros PDB - Register accessor macros + * @{ + */ + + +/* PDB - Register accessors */ +#define PDB_SC_REG(base) ((base)->SC) +#define PDB_MOD_REG(base) ((base)->MOD) +#define PDB_CNT_REG(base) ((base)->CNT) +#define PDB_IDLY_REG(base) ((base)->IDLY) +#define PDB_C1_REG(base,index) ((base)->CH[index].C1) +#define PDB_S_REG(base,index) ((base)->CH[index].S) +#define PDB_DLY_REG(base,index,index2) ((base)->CH[index].DLY[index2]) +#define PDB_INTC_REG(base,index) ((base)->DAC[index].INTC) +#define PDB_INT_REG(base,index) ((base)->DAC[index].INT) +#define PDB_POEN_REG(base) ((base)->POEN) +#define PDB_PODLY_REG(base,index) ((base)->PODLY[index]) + +/*! + * @} + */ /* end of group PDB_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- PDB Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PDB_Register_Masks PDB Register Masks + * @{ + */ + +/* SC Bit Fields */ +#define PDB_SC_LDOK_MASK 0x1u +#define PDB_SC_LDOK_SHIFT 0 +#define PDB_SC_CONT_MASK 0x2u +#define PDB_SC_CONT_SHIFT 1 +#define PDB_SC_MULT_MASK 0xCu +#define PDB_SC_MULT_SHIFT 2 +#define PDB_SC_MULT(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_MULT_SHIFT))&PDB_SC_MULT_MASK) +#define PDB_SC_PDBIE_MASK 0x20u +#define PDB_SC_PDBIE_SHIFT 5 +#define PDB_SC_PDBIF_MASK 0x40u +#define PDB_SC_PDBIF_SHIFT 6 +#define PDB_SC_PDBEN_MASK 0x80u +#define PDB_SC_PDBEN_SHIFT 7 +#define PDB_SC_TRGSEL_MASK 0xF00u +#define PDB_SC_TRGSEL_SHIFT 8 +#define PDB_SC_TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_TRGSEL_SHIFT))&PDB_SC_TRGSEL_MASK) +#define PDB_SC_PRESCALER_MASK 0x7000u +#define PDB_SC_PRESCALER_SHIFT 12 +#define PDB_SC_PRESCALER(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_PRESCALER_SHIFT))&PDB_SC_PRESCALER_MASK) +#define PDB_SC_DMAEN_MASK 0x8000u +#define PDB_SC_DMAEN_SHIFT 15 +#define PDB_SC_SWTRIG_MASK 0x10000u +#define PDB_SC_SWTRIG_SHIFT 16 +#define PDB_SC_PDBEIE_MASK 0x20000u +#define PDB_SC_PDBEIE_SHIFT 17 +#define PDB_SC_LDMOD_MASK 0xC0000u +#define PDB_SC_LDMOD_SHIFT 18 +#define PDB_SC_LDMOD(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_LDMOD_SHIFT))&PDB_SC_LDMOD_MASK) +/* MOD Bit Fields */ +#define PDB_MOD_MOD_MASK 0xFFFFu +#define PDB_MOD_MOD_SHIFT 0 +#define PDB_MOD_MOD(x) (((uint32_t)(((uint32_t)(x))<<PDB_MOD_MOD_SHIFT))&PDB_MOD_MOD_MASK) +/* CNT Bit Fields */ +#define PDB_CNT_CNT_MASK 0xFFFFu +#define PDB_CNT_CNT_SHIFT 0 +#define PDB_CNT_CNT(x) (((uint32_t)(((uint32_t)(x))<<PDB_CNT_CNT_SHIFT))&PDB_CNT_CNT_MASK) +/* IDLY Bit Fields */ +#define PDB_IDLY_IDLY_MASK 0xFFFFu +#define PDB_IDLY_IDLY_SHIFT 0 +#define PDB_IDLY_IDLY(x) (((uint32_t)(((uint32_t)(x))<<PDB_IDLY_IDLY_SHIFT))&PDB_IDLY_IDLY_MASK) +/* C1 Bit Fields */ +#define PDB_C1_EN_MASK 0xFFu +#define PDB_C1_EN_SHIFT 0 +#define PDB_C1_EN(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_EN_SHIFT))&PDB_C1_EN_MASK) +#define PDB_C1_TOS_MASK 0xFF00u +#define PDB_C1_TOS_SHIFT 8 +#define PDB_C1_TOS(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_TOS_SHIFT))&PDB_C1_TOS_MASK) +#define PDB_C1_BB_MASK 0xFF0000u +#define PDB_C1_BB_SHIFT 16 +#define PDB_C1_BB(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_BB_SHIFT))&PDB_C1_BB_MASK) +/* S Bit Fields */ +#define PDB_S_ERR_MASK 0xFFu +#define PDB_S_ERR_SHIFT 0 +#define PDB_S_ERR(x) (((uint32_t)(((uint32_t)(x))<<PDB_S_ERR_SHIFT))&PDB_S_ERR_MASK) +#define PDB_S_CF_MASK 0xFF0000u +#define PDB_S_CF_SHIFT 16 +#define PDB_S_CF(x) (((uint32_t)(((uint32_t)(x))<<PDB_S_CF_SHIFT))&PDB_S_CF_MASK) +/* DLY Bit Fields */ +#define PDB_DLY_DLY_MASK 0xFFFFu +#define PDB_DLY_DLY_SHIFT 0 +#define PDB_DLY_DLY(x) (((uint32_t)(((uint32_t)(x))<<PDB_DLY_DLY_SHIFT))&PDB_DLY_DLY_MASK) +/* INTC Bit Fields */ +#define PDB_INTC_TOE_MASK 0x1u +#define PDB_INTC_TOE_SHIFT 0 +#define PDB_INTC_EXT_MASK 0x2u +#define PDB_INTC_EXT_SHIFT 1 +/* INT Bit Fields */ +#define PDB_INT_INT_MASK 0xFFFFu +#define PDB_INT_INT_SHIFT 0 +#define PDB_INT_INT(x) (((uint32_t)(((uint32_t)(x))<<PDB_INT_INT_SHIFT))&PDB_INT_INT_MASK) +/* POEN Bit Fields */ +#define PDB_POEN_POEN_MASK 0xFFu +#define PDB_POEN_POEN_SHIFT 0 +#define PDB_POEN_POEN(x) (((uint32_t)(((uint32_t)(x))<<PDB_POEN_POEN_SHIFT))&PDB_POEN_POEN_MASK) +/* PODLY Bit Fields */ +#define PDB_PODLY_DLY2_MASK 0xFFFFu +#define PDB_PODLY_DLY2_SHIFT 0 +#define PDB_PODLY_DLY2(x) (((uint32_t)(((uint32_t)(x))<<PDB_PODLY_DLY2_SHIFT))&PDB_PODLY_DLY2_MASK) +#define PDB_PODLY_DLY1_MASK 0xFFFF0000u +#define PDB_PODLY_DLY1_SHIFT 16 +#define PDB_PODLY_DLY1(x) (((uint32_t)(((uint32_t)(x))<<PDB_PODLY_DLY1_SHIFT))&PDB_PODLY_DLY1_MASK) + +/*! + * @} + */ /* end of group PDB_Register_Masks */ + + +/* PDB - Peripheral instance base addresses */ +/** Peripheral PDB0 base address */ +#define PDB0_BASE (0x40036000u) +/** Peripheral PDB0 base pointer */ +#define PDB0 ((PDB_Type *)PDB0_BASE) +#define PDB0_BASE_PTR (PDB0) +/** Array initializer of PDB peripheral base addresses */ +#define PDB_BASE_ADDRS { PDB0_BASE } +/** Array initializer of PDB peripheral base pointers */ +#define PDB_BASE_PTRS { PDB0 } +/** Interrupt vectors for the PDB peripheral type */ +#define PDB_IRQS { PDB0_IRQn } + +/* ---------------------------------------------------------------------------- + -- PDB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PDB_Register_Accessor_Macros PDB - Register accessor macros + * @{ + */ + + +/* PDB - Register instance definitions */ +/* PDB0 */ +#define PDB0_SC PDB_SC_REG(PDB0) +#define PDB0_MOD PDB_MOD_REG(PDB0) +#define PDB0_CNT PDB_CNT_REG(PDB0) +#define PDB0_IDLY PDB_IDLY_REG(PDB0) +#define PDB0_CH0C1 PDB_C1_REG(PDB0,0) +#define PDB0_CH0S PDB_S_REG(PDB0,0) +#define PDB0_CH0DLY0 PDB_DLY_REG(PDB0,0,0) +#define PDB0_CH0DLY1 PDB_DLY_REG(PDB0,0,1) +#define PDB0_CH1C1 PDB_C1_REG(PDB0,1) +#define PDB0_CH1S PDB_S_REG(PDB0,1) +#define PDB0_CH1DLY0 PDB_DLY_REG(PDB0,1,0) +#define PDB0_CH1DLY1 PDB_DLY_REG(PDB0,1,1) +#define PDB0_DACINTC0 PDB_INTC_REG(PDB0,0) +#define PDB0_DACINT0 PDB_INT_REG(PDB0,0) +#define PDB0_DACINTC1 PDB_INTC_REG(PDB0,1) +#define PDB0_DACINT1 PDB_INT_REG(PDB0,1) +#define PDB0_POEN PDB_POEN_REG(PDB0) +#define PDB0_PO0DLY PDB_PODLY_REG(PDB0,0) +#define PDB0_PO1DLY PDB_PODLY_REG(PDB0,1) + +/* PDB - Register array accessors */ +#define PDB0_C1(index) PDB_C1_REG(PDB0,index) +#define PDB0_S(index) PDB_S_REG(PDB0,index) +#define PDB0_DLY(index,index2) PDB_DLY_REG(PDB0,index,index2) +#define PDB0_INTC(index) PDB_INTC_REG(PDB0,index) +#define PDB0_INT(index) PDB_INT_REG(PDB0,index) +#define PDB0_PODLY(index) PDB_PODLY_REG(PDB0,index) + +/*! + * @} + */ /* end of group PDB_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group PDB_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- PIT Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PIT_Peripheral_Access_Layer PIT Peripheral Access Layer + * @{ + */ + +/** PIT - Register Layout Typedef */ +typedef struct { + __IO uint32_t MCR; /**< PIT Module Control Register, offset: 0x0 */ + uint8_t RESERVED_0[252]; + struct { /* offset: 0x100, array step: 0x10 */ + __IO uint32_t LDVAL; /**< Timer Load Value Register, array offset: 0x100, array step: 0x10 */ + __I uint32_t CVAL; /**< Current Timer Value Register, array offset: 0x104, array step: 0x10 */ + __IO uint32_t TCTRL; /**< Timer Control Register, array offset: 0x108, array step: 0x10 */ + __IO uint32_t TFLG; /**< Timer Flag Register, array offset: 0x10C, array step: 0x10 */ + } CHANNEL[4]; +} PIT_Type, *PIT_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- PIT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PIT_Register_Accessor_Macros PIT - Register accessor macros + * @{ + */ + + +/* PIT - Register accessors */ +#define PIT_MCR_REG(base) ((base)->MCR) +#define PIT_LDVAL_REG(base,index) ((base)->CHANNEL[index].LDVAL) +#define PIT_CVAL_REG(base,index) ((base)->CHANNEL[index].CVAL) +#define PIT_TCTRL_REG(base,index) ((base)->CHANNEL[index].TCTRL) +#define PIT_TFLG_REG(base,index) ((base)->CHANNEL[index].TFLG) + +/*! + * @} + */ /* end of group PIT_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- PIT Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PIT_Register_Masks PIT Register Masks + * @{ + */ + +/* MCR Bit Fields */ +#define PIT_MCR_FRZ_MASK 0x1u +#define PIT_MCR_FRZ_SHIFT 0 +#define PIT_MCR_MDIS_MASK 0x2u +#define PIT_MCR_MDIS_SHIFT 1 +/* LDVAL Bit Fields */ +#define PIT_LDVAL_TSV_MASK 0xFFFFFFFFu +#define PIT_LDVAL_TSV_SHIFT 0 +#define PIT_LDVAL_TSV(x) (((uint32_t)(((uint32_t)(x))<<PIT_LDVAL_TSV_SHIFT))&PIT_LDVAL_TSV_MASK) +/* CVAL Bit Fields */ +#define PIT_CVAL_TVL_MASK 0xFFFFFFFFu +#define PIT_CVAL_TVL_SHIFT 0 +#define PIT_CVAL_TVL(x) (((uint32_t)(((uint32_t)(x))<<PIT_CVAL_TVL_SHIFT))&PIT_CVAL_TVL_MASK) +/* TCTRL Bit Fields */ +#define PIT_TCTRL_TEN_MASK 0x1u +#define PIT_TCTRL_TEN_SHIFT 0 +#define PIT_TCTRL_TIE_MASK 0x2u +#define PIT_TCTRL_TIE_SHIFT 1 +#define PIT_TCTRL_CHN_MASK 0x4u +#define PIT_TCTRL_CHN_SHIFT 2 +/* TFLG Bit Fields */ +#define PIT_TFLG_TIF_MASK 0x1u +#define PIT_TFLG_TIF_SHIFT 0 + +/*! + * @} + */ /* end of group PIT_Register_Masks */ + + +/* PIT - Peripheral instance base addresses */ +/** Peripheral PIT base address */ +#define PIT_BASE (0x40037000u) +/** Peripheral PIT base pointer */ +#define PIT ((PIT_Type *)PIT_BASE) +#define PIT_BASE_PTR (PIT) +/** Array initializer of PIT peripheral base addresses */ +#define PIT_BASE_ADDRS { PIT_BASE } +/** Array initializer of PIT peripheral base pointers */ +#define PIT_BASE_PTRS { PIT } +/** Interrupt vectors for the PIT peripheral type */ +#define PIT_IRQS { PIT0_IRQn, PIT1_IRQn, PIT2_IRQn, PIT3_IRQn } + +/* ---------------------------------------------------------------------------- + -- PIT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PIT_Register_Accessor_Macros PIT - Register accessor macros + * @{ + */ + + +/* PIT - Register instance definitions */ +/* PIT */ +#define PIT_MCR PIT_MCR_REG(PIT) +#define PIT_LDVAL0 PIT_LDVAL_REG(PIT,0) +#define PIT_CVAL0 PIT_CVAL_REG(PIT,0) +#define PIT_TCTRL0 PIT_TCTRL_REG(PIT,0) +#define PIT_TFLG0 PIT_TFLG_REG(PIT,0) +#define PIT_LDVAL1 PIT_LDVAL_REG(PIT,1) +#define PIT_CVAL1 PIT_CVAL_REG(PIT,1) +#define PIT_TCTRL1 PIT_TCTRL_REG(PIT,1) +#define PIT_TFLG1 PIT_TFLG_REG(PIT,1) +#define PIT_LDVAL2 PIT_LDVAL_REG(PIT,2) +#define PIT_CVAL2 PIT_CVAL_REG(PIT,2) +#define PIT_TCTRL2 PIT_TCTRL_REG(PIT,2) +#define PIT_TFLG2 PIT_TFLG_REG(PIT,2) +#define PIT_LDVAL3 PIT_LDVAL_REG(PIT,3) +#define PIT_CVAL3 PIT_CVAL_REG(PIT,3) +#define PIT_TCTRL3 PIT_TCTRL_REG(PIT,3) +#define PIT_TFLG3 PIT_TFLG_REG(PIT,3) + +/* PIT - Register array accessors */ +#define PIT_LDVAL(index) PIT_LDVAL_REG(PIT,index) +#define PIT_CVAL(index) PIT_CVAL_REG(PIT,index) +#define PIT_TCTRL(index) PIT_TCTRL_REG(PIT,index) +#define PIT_TFLG(index) PIT_TFLG_REG(PIT,index) + +/*! + * @} + */ /* end of group PIT_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group PIT_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- PMC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PMC_Peripheral_Access_Layer PMC Peripheral Access Layer + * @{ + */ + +/** PMC - Register Layout Typedef */ +typedef struct { + __IO uint8_t LVDSC1; /**< Low Voltage Detect Status And Control 1 register, offset: 0x0 */ + __IO uint8_t LVDSC2; /**< Low Voltage Detect Status And Control 2 register, offset: 0x1 */ + __IO uint8_t REGSC; /**< Regulator Status And Control register, offset: 0x2 */ +} PMC_Type, *PMC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- PMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PMC_Register_Accessor_Macros PMC - Register accessor macros + * @{ + */ + + +/* PMC - Register accessors */ +#define PMC_LVDSC1_REG(base) ((base)->LVDSC1) +#define PMC_LVDSC2_REG(base) ((base)->LVDSC2) +#define PMC_REGSC_REG(base) ((base)->REGSC) + +/*! + * @} + */ /* end of group PMC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- PMC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PMC_Register_Masks PMC Register Masks + * @{ + */ + +/* LVDSC1 Bit Fields */ +#define PMC_LVDSC1_LVDV_MASK 0x3u +#define PMC_LVDSC1_LVDV_SHIFT 0 +#define PMC_LVDSC1_LVDV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC1_LVDV_SHIFT))&PMC_LVDSC1_LVDV_MASK) +#define PMC_LVDSC1_LVDRE_MASK 0x10u +#define PMC_LVDSC1_LVDRE_SHIFT 4 +#define PMC_LVDSC1_LVDIE_MASK 0x20u +#define PMC_LVDSC1_LVDIE_SHIFT 5 +#define PMC_LVDSC1_LVDACK_MASK 0x40u +#define PMC_LVDSC1_LVDACK_SHIFT 6 +#define PMC_LVDSC1_LVDF_MASK 0x80u +#define PMC_LVDSC1_LVDF_SHIFT 7 +/* LVDSC2 Bit Fields */ +#define PMC_LVDSC2_LVWV_MASK 0x3u +#define PMC_LVDSC2_LVWV_SHIFT 0 +#define PMC_LVDSC2_LVWV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC2_LVWV_SHIFT))&PMC_LVDSC2_LVWV_MASK) +#define PMC_LVDSC2_LVWIE_MASK 0x20u +#define PMC_LVDSC2_LVWIE_SHIFT 5 +#define PMC_LVDSC2_LVWACK_MASK 0x40u +#define PMC_LVDSC2_LVWACK_SHIFT 6 +#define PMC_LVDSC2_LVWF_MASK 0x80u +#define PMC_LVDSC2_LVWF_SHIFT 7 +/* REGSC Bit Fields */ +#define PMC_REGSC_BGBE_MASK 0x1u +#define PMC_REGSC_BGBE_SHIFT 0 +#define PMC_REGSC_REGONS_MASK 0x4u +#define PMC_REGSC_REGONS_SHIFT 2 +#define PMC_REGSC_ACKISO_MASK 0x8u +#define PMC_REGSC_ACKISO_SHIFT 3 +#define PMC_REGSC_BGEN_MASK 0x10u +#define PMC_REGSC_BGEN_SHIFT 4 + +/*! + * @} + */ /* end of group PMC_Register_Masks */ + + +/* PMC - Peripheral instance base addresses */ +/** Peripheral PMC base address */ +#define PMC_BASE (0x4007D000u) +/** Peripheral PMC base pointer */ +#define PMC ((PMC_Type *)PMC_BASE) +#define PMC_BASE_PTR (PMC) +/** Array initializer of PMC peripheral base addresses */ +#define PMC_BASE_ADDRS { PMC_BASE } +/** Array initializer of PMC peripheral base pointers */ +#define PMC_BASE_PTRS { PMC } +/** Interrupt vectors for the PMC peripheral type */ +#define PMC_IRQS { LVD_LVW_IRQn } + +/* ---------------------------------------------------------------------------- + -- PMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PMC_Register_Accessor_Macros PMC - Register accessor macros + * @{ + */ + + +/* PMC - Register instance definitions */ +/* PMC */ +#define PMC_LVDSC1 PMC_LVDSC1_REG(PMC) +#define PMC_LVDSC2 PMC_LVDSC2_REG(PMC) +#define PMC_REGSC PMC_REGSC_REG(PMC) + +/*! + * @} + */ /* end of group PMC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group PMC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- PORT Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PORT_Peripheral_Access_Layer PORT Peripheral Access Layer + * @{ + */ + +/** PORT - Register Layout Typedef */ +typedef struct { + __IO uint32_t PCR[32]; /**< Pin Control Register n, array offset: 0x0, array step: 0x4 */ + __O uint32_t GPCLR; /**< Global Pin Control Low Register, offset: 0x80 */ + __O uint32_t GPCHR; /**< Global Pin Control High Register, offset: 0x84 */ + uint8_t RESERVED_0[24]; + __IO uint32_t ISFR; /**< Interrupt Status Flag Register, offset: 0xA0 */ + uint8_t RESERVED_1[28]; + __IO uint32_t DFER; /**< Digital Filter Enable Register, offset: 0xC0 */ + __IO uint32_t DFCR; /**< Digital Filter Clock Register, offset: 0xC4 */ + __IO uint32_t DFWR; /**< Digital Filter Width Register, offset: 0xC8 */ +} PORT_Type, *PORT_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- PORT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PORT_Register_Accessor_Macros PORT - Register accessor macros + * @{ + */ + + +/* PORT - Register accessors */ +#define PORT_PCR_REG(base,index) ((base)->PCR[index]) +#define PORT_GPCLR_REG(base) ((base)->GPCLR) +#define PORT_GPCHR_REG(base) ((base)->GPCHR) +#define PORT_ISFR_REG(base) ((base)->ISFR) +#define PORT_DFER_REG(base) ((base)->DFER) +#define PORT_DFCR_REG(base) ((base)->DFCR) +#define PORT_DFWR_REG(base) ((base)->DFWR) + +/*! + * @} + */ /* end of group PORT_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- PORT Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PORT_Register_Masks PORT Register Masks + * @{ + */ + +/* PCR Bit Fields */ +#define PORT_PCR_PS_MASK 0x1u +#define PORT_PCR_PS_SHIFT 0 +#define PORT_PCR_PE_MASK 0x2u +#define PORT_PCR_PE_SHIFT 1 +#define PORT_PCR_SRE_MASK 0x4u +#define PORT_PCR_SRE_SHIFT 2 +#define PORT_PCR_PFE_MASK 0x10u +#define PORT_PCR_PFE_SHIFT 4 +#define PORT_PCR_ODE_MASK 0x20u +#define PORT_PCR_ODE_SHIFT 5 +#define PORT_PCR_DSE_MASK 0x40u +#define PORT_PCR_DSE_SHIFT 6 +#define PORT_PCR_MUX_MASK 0x700u +#define PORT_PCR_MUX_SHIFT 8 +#define PORT_PCR_MUX(x) (((uint32_t)(((uint32_t)(x))<<PORT_PCR_MUX_SHIFT))&PORT_PCR_MUX_MASK) +#define PORT_PCR_LK_MASK 0x8000u +#define PORT_PCR_LK_SHIFT 15 +#define PORT_PCR_IRQC_MASK 0xF0000u +#define PORT_PCR_IRQC_SHIFT 16 +#define PORT_PCR_IRQC(x) (((uint32_t)(((uint32_t)(x))<<PORT_PCR_IRQC_SHIFT))&PORT_PCR_IRQC_MASK) +#define PORT_PCR_ISF_MASK 0x1000000u +#define PORT_PCR_ISF_SHIFT 24 +/* GPCLR Bit Fields */ +#define PORT_GPCLR_GPWD_MASK 0xFFFFu +#define PORT_GPCLR_GPWD_SHIFT 0 +#define PORT_GPCLR_GPWD(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCLR_GPWD_SHIFT))&PORT_GPCLR_GPWD_MASK) +#define PORT_GPCLR_GPWE_MASK 0xFFFF0000u +#define PORT_GPCLR_GPWE_SHIFT 16 +#define PORT_GPCLR_GPWE(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCLR_GPWE_SHIFT))&PORT_GPCLR_GPWE_MASK) +/* GPCHR Bit Fields */ +#define PORT_GPCHR_GPWD_MASK 0xFFFFu +#define PORT_GPCHR_GPWD_SHIFT 0 +#define PORT_GPCHR_GPWD(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCHR_GPWD_SHIFT))&PORT_GPCHR_GPWD_MASK) +#define PORT_GPCHR_GPWE_MASK 0xFFFF0000u +#define PORT_GPCHR_GPWE_SHIFT 16 +#define PORT_GPCHR_GPWE(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCHR_GPWE_SHIFT))&PORT_GPCHR_GPWE_MASK) +/* ISFR Bit Fields */ +#define PORT_ISFR_ISF_MASK 0xFFFFFFFFu +#define PORT_ISFR_ISF_SHIFT 0 +#define PORT_ISFR_ISF(x) (((uint32_t)(((uint32_t)(x))<<PORT_ISFR_ISF_SHIFT))&PORT_ISFR_ISF_MASK) +/* DFER Bit Fields */ +#define PORT_DFER_DFE_MASK 0xFFFFFFFFu +#define PORT_DFER_DFE_SHIFT 0 +#define PORT_DFER_DFE(x) (((uint32_t)(((uint32_t)(x))<<PORT_DFER_DFE_SHIFT))&PORT_DFER_DFE_MASK) +/* DFCR Bit Fields */ +#define PORT_DFCR_CS_MASK 0x1u +#define PORT_DFCR_CS_SHIFT 0 +/* DFWR Bit Fields */ +#define PORT_DFWR_FILT_MASK 0x1Fu +#define PORT_DFWR_FILT_SHIFT 0 +#define PORT_DFWR_FILT(x) (((uint32_t)(((uint32_t)(x))<<PORT_DFWR_FILT_SHIFT))&PORT_DFWR_FILT_MASK) + +/*! + * @} + */ /* end of group PORT_Register_Masks */ + + +/* PORT - Peripheral instance base addresses */ +/** Peripheral PORTA base address */ +#define PORTA_BASE (0x40049000u) +/** Peripheral PORTA base pointer */ +#define PORTA ((PORT_Type *)PORTA_BASE) +#define PORTA_BASE_PTR (PORTA) +/** Peripheral PORTB base address */ +#define PORTB_BASE (0x4004A000u) +/** Peripheral PORTB base pointer */ +#define PORTB ((PORT_Type *)PORTB_BASE) +#define PORTB_BASE_PTR (PORTB) +/** Peripheral PORTC base address */ +#define PORTC_BASE (0x4004B000u) +/** Peripheral PORTC base pointer */ +#define PORTC ((PORT_Type *)PORTC_BASE) +#define PORTC_BASE_PTR (PORTC) +/** Peripheral PORTD base address */ +#define PORTD_BASE (0x4004C000u) +/** Peripheral PORTD base pointer */ +#define PORTD ((PORT_Type *)PORTD_BASE) +#define PORTD_BASE_PTR (PORTD) +/** Peripheral PORTE base address */ +#define PORTE_BASE (0x4004D000u) +/** Peripheral PORTE base pointer */ +#define PORTE ((PORT_Type *)PORTE_BASE) +#define PORTE_BASE_PTR (PORTE) +/** Array initializer of PORT peripheral base addresses */ +#define PORT_BASE_ADDRS { PORTA_BASE, PORTB_BASE, PORTC_BASE, PORTD_BASE, PORTE_BASE } +/** Array initializer of PORT peripheral base pointers */ +#define PORT_BASE_PTRS { PORTA, PORTB, PORTC, PORTD, PORTE } +/** Interrupt vectors for the PORT peripheral type */ +#define PORT_IRQS { PORTA_IRQn, PORTB_IRQn, PORTC_IRQn, PORTD_IRQn, PORTE_IRQn } + +/* ---------------------------------------------------------------------------- + -- PORT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup PORT_Register_Accessor_Macros PORT - Register accessor macros + * @{ + */ + + +/* PORT - Register instance definitions */ +/* PORTA */ +#define PORTA_PCR0 PORT_PCR_REG(PORTA,0) +#define PORTA_PCR1 PORT_PCR_REG(PORTA,1) +#define PORTA_PCR2 PORT_PCR_REG(PORTA,2) +#define PORTA_PCR3 PORT_PCR_REG(PORTA,3) +#define PORTA_PCR4 PORT_PCR_REG(PORTA,4) +#define PORTA_PCR5 PORT_PCR_REG(PORTA,5) +#define PORTA_PCR6 PORT_PCR_REG(PORTA,6) +#define PORTA_PCR7 PORT_PCR_REG(PORTA,7) +#define PORTA_PCR8 PORT_PCR_REG(PORTA,8) +#define PORTA_PCR9 PORT_PCR_REG(PORTA,9) +#define PORTA_PCR10 PORT_PCR_REG(PORTA,10) +#define PORTA_PCR11 PORT_PCR_REG(PORTA,11) +#define PORTA_PCR12 PORT_PCR_REG(PORTA,12) +#define PORTA_PCR13 PORT_PCR_REG(PORTA,13) +#define PORTA_PCR14 PORT_PCR_REG(PORTA,14) +#define PORTA_PCR15 PORT_PCR_REG(PORTA,15) +#define PORTA_PCR16 PORT_PCR_REG(PORTA,16) +#define PORTA_PCR17 PORT_PCR_REG(PORTA,17) +#define PORTA_PCR18 PORT_PCR_REG(PORTA,18) +#define PORTA_PCR19 PORT_PCR_REG(PORTA,19) +#define PORTA_PCR20 PORT_PCR_REG(PORTA,20) +#define PORTA_PCR21 PORT_PCR_REG(PORTA,21) +#define PORTA_PCR22 PORT_PCR_REG(PORTA,22) +#define PORTA_PCR23 PORT_PCR_REG(PORTA,23) +#define PORTA_PCR24 PORT_PCR_REG(PORTA,24) +#define PORTA_PCR25 PORT_PCR_REG(PORTA,25) +#define PORTA_PCR26 PORT_PCR_REG(PORTA,26) +#define PORTA_PCR27 PORT_PCR_REG(PORTA,27) +#define PORTA_PCR28 PORT_PCR_REG(PORTA,28) +#define PORTA_PCR29 PORT_PCR_REG(PORTA,29) +#define PORTA_PCR30 PORT_PCR_REG(PORTA,30) +#define PORTA_PCR31 PORT_PCR_REG(PORTA,31) +#define PORTA_GPCLR PORT_GPCLR_REG(PORTA) +#define PORTA_GPCHR PORT_GPCHR_REG(PORTA) +#define PORTA_ISFR PORT_ISFR_REG(PORTA) +/* PORTB */ +#define PORTB_PCR0 PORT_PCR_REG(PORTB,0) +#define PORTB_PCR1 PORT_PCR_REG(PORTB,1) +#define PORTB_PCR2 PORT_PCR_REG(PORTB,2) +#define PORTB_PCR3 PORT_PCR_REG(PORTB,3) +#define PORTB_PCR4 PORT_PCR_REG(PORTB,4) +#define PORTB_PCR5 PORT_PCR_REG(PORTB,5) +#define PORTB_PCR6 PORT_PCR_REG(PORTB,6) +#define PORTB_PCR7 PORT_PCR_REG(PORTB,7) +#define PORTB_PCR8 PORT_PCR_REG(PORTB,8) +#define PORTB_PCR9 PORT_PCR_REG(PORTB,9) +#define PORTB_PCR10 PORT_PCR_REG(PORTB,10) +#define PORTB_PCR11 PORT_PCR_REG(PORTB,11) +#define PORTB_PCR12 PORT_PCR_REG(PORTB,12) +#define PORTB_PCR13 PORT_PCR_REG(PORTB,13) +#define PORTB_PCR14 PORT_PCR_REG(PORTB,14) +#define PORTB_PCR15 PORT_PCR_REG(PORTB,15) +#define PORTB_PCR16 PORT_PCR_REG(PORTB,16) +#define PORTB_PCR17 PORT_PCR_REG(PORTB,17) +#define PORTB_PCR18 PORT_PCR_REG(PORTB,18) +#define PORTB_PCR19 PORT_PCR_REG(PORTB,19) +#define PORTB_PCR20 PORT_PCR_REG(PORTB,20) +#define PORTB_PCR21 PORT_PCR_REG(PORTB,21) +#define PORTB_PCR22 PORT_PCR_REG(PORTB,22) +#define PORTB_PCR23 PORT_PCR_REG(PORTB,23) +#define PORTB_PCR24 PORT_PCR_REG(PORTB,24) +#define PORTB_PCR25 PORT_PCR_REG(PORTB,25) +#define PORTB_PCR26 PORT_PCR_REG(PORTB,26) +#define PORTB_PCR27 PORT_PCR_REG(PORTB,27) +#define PORTB_PCR28 PORT_PCR_REG(PORTB,28) +#define PORTB_PCR29 PORT_PCR_REG(PORTB,29) +#define PORTB_PCR30 PORT_PCR_REG(PORTB,30) +#define PORTB_PCR31 PORT_PCR_REG(PORTB,31) +#define PORTB_GPCLR PORT_GPCLR_REG(PORTB) +#define PORTB_GPCHR PORT_GPCHR_REG(PORTB) +#define PORTB_ISFR PORT_ISFR_REG(PORTB) +/* PORTC */ +#define PORTC_PCR0 PORT_PCR_REG(PORTC,0) +#define PORTC_PCR1 PORT_PCR_REG(PORTC,1) +#define PORTC_PCR2 PORT_PCR_REG(PORTC,2) +#define PORTC_PCR3 PORT_PCR_REG(PORTC,3) +#define PORTC_PCR4 PORT_PCR_REG(PORTC,4) +#define PORTC_PCR5 PORT_PCR_REG(PORTC,5) +#define PORTC_PCR6 PORT_PCR_REG(PORTC,6) +#define PORTC_PCR7 PORT_PCR_REG(PORTC,7) +#define PORTC_PCR8 PORT_PCR_REG(PORTC,8) +#define PORTC_PCR9 PORT_PCR_REG(PORTC,9) +#define PORTC_PCR10 PORT_PCR_REG(PORTC,10) +#define PORTC_PCR11 PORT_PCR_REG(PORTC,11) +#define PORTC_PCR12 PORT_PCR_REG(PORTC,12) +#define PORTC_PCR13 PORT_PCR_REG(PORTC,13) +#define PORTC_PCR14 PORT_PCR_REG(PORTC,14) +#define PORTC_PCR15 PORT_PCR_REG(PORTC,15) +#define PORTC_PCR16 PORT_PCR_REG(PORTC,16) +#define PORTC_PCR17 PORT_PCR_REG(PORTC,17) +#define PORTC_PCR18 PORT_PCR_REG(PORTC,18) +#define PORTC_PCR19 PORT_PCR_REG(PORTC,19) +#define PORTC_PCR20 PORT_PCR_REG(PORTC,20) +#define PORTC_PCR21 PORT_PCR_REG(PORTC,21) +#define PORTC_PCR22 PORT_PCR_REG(PORTC,22) +#define PORTC_PCR23 PORT_PCR_REG(PORTC,23) +#define PORTC_PCR24 PORT_PCR_REG(PORTC,24) +#define PORTC_PCR25 PORT_PCR_REG(PORTC,25) +#define PORTC_PCR26 PORT_PCR_REG(PORTC,26) +#define PORTC_PCR27 PORT_PCR_REG(PORTC,27) +#define PORTC_PCR28 PORT_PCR_REG(PORTC,28) +#define PORTC_PCR29 PORT_PCR_REG(PORTC,29) +#define PORTC_PCR30 PORT_PCR_REG(PORTC,30) +#define PORTC_PCR31 PORT_PCR_REG(PORTC,31) +#define PORTC_GPCLR PORT_GPCLR_REG(PORTC) +#define PORTC_GPCHR PORT_GPCHR_REG(PORTC) +#define PORTC_ISFR PORT_ISFR_REG(PORTC) +/* PORTD */ +#define PORTD_PCR0 PORT_PCR_REG(PORTD,0) +#define PORTD_PCR1 PORT_PCR_REG(PORTD,1) +#define PORTD_PCR2 PORT_PCR_REG(PORTD,2) +#define PORTD_PCR3 PORT_PCR_REG(PORTD,3) +#define PORTD_PCR4 PORT_PCR_REG(PORTD,4) +#define PORTD_PCR5 PORT_PCR_REG(PORTD,5) +#define PORTD_PCR6 PORT_PCR_REG(PORTD,6) +#define PORTD_PCR7 PORT_PCR_REG(PORTD,7) +#define PORTD_PCR8 PORT_PCR_REG(PORTD,8) +#define PORTD_PCR9 PORT_PCR_REG(PORTD,9) +#define PORTD_PCR10 PORT_PCR_REG(PORTD,10) +#define PORTD_PCR11 PORT_PCR_REG(PORTD,11) +#define PORTD_PCR12 PORT_PCR_REG(PORTD,12) +#define PORTD_PCR13 PORT_PCR_REG(PORTD,13) +#define PORTD_PCR14 PORT_PCR_REG(PORTD,14) +#define PORTD_PCR15 PORT_PCR_REG(PORTD,15) +#define PORTD_PCR16 PORT_PCR_REG(PORTD,16) +#define PORTD_PCR17 PORT_PCR_REG(PORTD,17) +#define PORTD_PCR18 PORT_PCR_REG(PORTD,18) +#define PORTD_PCR19 PORT_PCR_REG(PORTD,19) +#define PORTD_PCR20 PORT_PCR_REG(PORTD,20) +#define PORTD_PCR21 PORT_PCR_REG(PORTD,21) +#define PORTD_PCR22 PORT_PCR_REG(PORTD,22) +#define PORTD_PCR23 PORT_PCR_REG(PORTD,23) +#define PORTD_PCR24 PORT_PCR_REG(PORTD,24) +#define PORTD_PCR25 PORT_PCR_REG(PORTD,25) +#define PORTD_PCR26 PORT_PCR_REG(PORTD,26) +#define PORTD_PCR27 PORT_PCR_REG(PORTD,27) +#define PORTD_PCR28 PORT_PCR_REG(PORTD,28) +#define PORTD_PCR29 PORT_PCR_REG(PORTD,29) +#define PORTD_PCR30 PORT_PCR_REG(PORTD,30) +#define PORTD_PCR31 PORT_PCR_REG(PORTD,31) +#define PORTD_GPCLR PORT_GPCLR_REG(PORTD) +#define PORTD_GPCHR PORT_GPCHR_REG(PORTD) +#define PORTD_ISFR PORT_ISFR_REG(PORTD) +#define PORTD_DFER PORT_DFER_REG(PORTD) +#define PORTD_DFCR PORT_DFCR_REG(PORTD) +#define PORTD_DFWR PORT_DFWR_REG(PORTD) +/* PORTE */ +#define PORTE_PCR0 PORT_PCR_REG(PORTE,0) +#define PORTE_PCR1 PORT_PCR_REG(PORTE,1) +#define PORTE_PCR2 PORT_PCR_REG(PORTE,2) +#define PORTE_PCR3 PORT_PCR_REG(PORTE,3) +#define PORTE_PCR4 PORT_PCR_REG(PORTE,4) +#define PORTE_PCR5 PORT_PCR_REG(PORTE,5) +#define PORTE_PCR6 PORT_PCR_REG(PORTE,6) +#define PORTE_PCR7 PORT_PCR_REG(PORTE,7) +#define PORTE_PCR8 PORT_PCR_REG(PORTE,8) +#define PORTE_PCR9 PORT_PCR_REG(PORTE,9) +#define PORTE_PCR10 PORT_PCR_REG(PORTE,10) +#define PORTE_PCR11 PORT_PCR_REG(PORTE,11) +#define PORTE_PCR12 PORT_PCR_REG(PORTE,12) +#define PORTE_PCR13 PORT_PCR_REG(PORTE,13) +#define PORTE_PCR14 PORT_PCR_REG(PORTE,14) +#define PORTE_PCR15 PORT_PCR_REG(PORTE,15) +#define PORTE_PCR16 PORT_PCR_REG(PORTE,16) +#define PORTE_PCR17 PORT_PCR_REG(PORTE,17) +#define PORTE_PCR18 PORT_PCR_REG(PORTE,18) +#define PORTE_PCR19 PORT_PCR_REG(PORTE,19) +#define PORTE_PCR20 PORT_PCR_REG(PORTE,20) +#define PORTE_PCR21 PORT_PCR_REG(PORTE,21) +#define PORTE_PCR22 PORT_PCR_REG(PORTE,22) +#define PORTE_PCR23 PORT_PCR_REG(PORTE,23) +#define PORTE_PCR24 PORT_PCR_REG(PORTE,24) +#define PORTE_PCR25 PORT_PCR_REG(PORTE,25) +#define PORTE_PCR26 PORT_PCR_REG(PORTE,26) +#define PORTE_PCR27 PORT_PCR_REG(PORTE,27) +#define PORTE_PCR28 PORT_PCR_REG(PORTE,28) +#define PORTE_PCR29 PORT_PCR_REG(PORTE,29) +#define PORTE_PCR30 PORT_PCR_REG(PORTE,30) +#define PORTE_PCR31 PORT_PCR_REG(PORTE,31) +#define PORTE_GPCLR PORT_GPCLR_REG(PORTE) +#define PORTE_GPCHR PORT_GPCHR_REG(PORTE) +#define PORTE_ISFR PORT_ISFR_REG(PORTE) + +/* PORT - Register array accessors */ +#define PORTA_PCR(index) PORT_PCR_REG(PORTA,index) +#define PORTB_PCR(index) PORT_PCR_REG(PORTB,index) +#define PORTC_PCR(index) PORT_PCR_REG(PORTC,index) +#define PORTD_PCR(index) PORT_PCR_REG(PORTD,index) +#define PORTE_PCR(index) PORT_PCR_REG(PORTE,index) + +/*! + * @} + */ /* end of group PORT_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group PORT_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- RCM Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RCM_Peripheral_Access_Layer RCM Peripheral Access Layer + * @{ + */ + +/** RCM - Register Layout Typedef */ +typedef struct { + __I uint8_t SRS0; /**< System Reset Status Register 0, offset: 0x0 */ + __I uint8_t SRS1; /**< System Reset Status Register 1, offset: 0x1 */ + uint8_t RESERVED_0[2]; + __IO uint8_t RPFC; /**< Reset Pin Filter Control register, offset: 0x4 */ + __IO uint8_t RPFW; /**< Reset Pin Filter Width register, offset: 0x5 */ + uint8_t RESERVED_1[1]; + __I uint8_t MR; /**< Mode Register, offset: 0x7 */ + __IO uint8_t SSRS0; /**< Sticky System Reset Status Register 0, offset: 0x8 */ + __IO uint8_t SSRS1; /**< Sticky System Reset Status Register 1, offset: 0x9 */ +} RCM_Type, *RCM_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- RCM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RCM_Register_Accessor_Macros RCM - Register accessor macros + * @{ + */ + + +/* RCM - Register accessors */ +#define RCM_SRS0_REG(base) ((base)->SRS0) +#define RCM_SRS1_REG(base) ((base)->SRS1) +#define RCM_RPFC_REG(base) ((base)->RPFC) +#define RCM_RPFW_REG(base) ((base)->RPFW) +#define RCM_MR_REG(base) ((base)->MR) +#define RCM_SSRS0_REG(base) ((base)->SSRS0) +#define RCM_SSRS1_REG(base) ((base)->SSRS1) + +/*! + * @} + */ /* end of group RCM_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- RCM Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RCM_Register_Masks RCM Register Masks + * @{ + */ + +/* SRS0 Bit Fields */ +#define RCM_SRS0_WAKEUP_MASK 0x1u +#define RCM_SRS0_WAKEUP_SHIFT 0 +#define RCM_SRS0_LVD_MASK 0x2u +#define RCM_SRS0_LVD_SHIFT 1 +#define RCM_SRS0_LOC_MASK 0x4u +#define RCM_SRS0_LOC_SHIFT 2 +#define RCM_SRS0_LOL_MASK 0x8u +#define RCM_SRS0_LOL_SHIFT 3 +#define RCM_SRS0_WDOG_MASK 0x20u +#define RCM_SRS0_WDOG_SHIFT 5 +#define RCM_SRS0_PIN_MASK 0x40u +#define RCM_SRS0_PIN_SHIFT 6 +#define RCM_SRS0_POR_MASK 0x80u +#define RCM_SRS0_POR_SHIFT 7 +/* SRS1 Bit Fields */ +#define RCM_SRS1_JTAG_MASK 0x1u +#define RCM_SRS1_JTAG_SHIFT 0 +#define RCM_SRS1_LOCKUP_MASK 0x2u +#define RCM_SRS1_LOCKUP_SHIFT 1 +#define RCM_SRS1_SW_MASK 0x4u +#define RCM_SRS1_SW_SHIFT 2 +#define RCM_SRS1_MDM_AP_MASK 0x8u +#define RCM_SRS1_MDM_AP_SHIFT 3 +#define RCM_SRS1_EZPT_MASK 0x10u +#define RCM_SRS1_EZPT_SHIFT 4 +#define RCM_SRS1_SACKERR_MASK 0x20u +#define RCM_SRS1_SACKERR_SHIFT 5 +/* RPFC Bit Fields */ +#define RCM_RPFC_RSTFLTSRW_MASK 0x3u +#define RCM_RPFC_RSTFLTSRW_SHIFT 0 +#define RCM_RPFC_RSTFLTSRW(x) (((uint8_t)(((uint8_t)(x))<<RCM_RPFC_RSTFLTSRW_SHIFT))&RCM_RPFC_RSTFLTSRW_MASK) +#define RCM_RPFC_RSTFLTSS_MASK 0x4u +#define RCM_RPFC_RSTFLTSS_SHIFT 2 +/* RPFW Bit Fields */ +#define RCM_RPFW_RSTFLTSEL_MASK 0x1Fu +#define RCM_RPFW_RSTFLTSEL_SHIFT 0 +#define RCM_RPFW_RSTFLTSEL(x) (((uint8_t)(((uint8_t)(x))<<RCM_RPFW_RSTFLTSEL_SHIFT))&RCM_RPFW_RSTFLTSEL_MASK) +/* MR Bit Fields */ +#define RCM_MR_EZP_MS_MASK 0x2u +#define RCM_MR_EZP_MS_SHIFT 1 +/* SSRS0 Bit Fields */ +#define RCM_SSRS0_SWAKEUP_MASK 0x1u +#define RCM_SSRS0_SWAKEUP_SHIFT 0 +#define RCM_SSRS0_SLVD_MASK 0x2u +#define RCM_SSRS0_SLVD_SHIFT 1 +#define RCM_SSRS0_SLOC_MASK 0x4u +#define RCM_SSRS0_SLOC_SHIFT 2 +#define RCM_SSRS0_SLOL_MASK 0x8u +#define RCM_SSRS0_SLOL_SHIFT 3 +#define RCM_SSRS0_SWDOG_MASK 0x20u +#define RCM_SSRS0_SWDOG_SHIFT 5 +#define RCM_SSRS0_SPIN_MASK 0x40u +#define RCM_SSRS0_SPIN_SHIFT 6 +#define RCM_SSRS0_SPOR_MASK 0x80u +#define RCM_SSRS0_SPOR_SHIFT 7 +/* SSRS1 Bit Fields */ +#define RCM_SSRS1_SJTAG_MASK 0x1u +#define RCM_SSRS1_SJTAG_SHIFT 0 +#define RCM_SSRS1_SLOCKUP_MASK 0x2u +#define RCM_SSRS1_SLOCKUP_SHIFT 1 +#define RCM_SSRS1_SSW_MASK 0x4u +#define RCM_SSRS1_SSW_SHIFT 2 +#define RCM_SSRS1_SMDM_AP_MASK 0x8u +#define RCM_SSRS1_SMDM_AP_SHIFT 3 +#define RCM_SSRS1_SEZPT_MASK 0x10u +#define RCM_SSRS1_SEZPT_SHIFT 4 +#define RCM_SSRS1_SSACKERR_MASK 0x20u +#define RCM_SSRS1_SSACKERR_SHIFT 5 + +/*! + * @} + */ /* end of group RCM_Register_Masks */ + + +/* RCM - Peripheral instance base addresses */ +/** Peripheral RCM base address */ +#define RCM_BASE (0x4007F000u) +/** Peripheral RCM base pointer */ +#define RCM ((RCM_Type *)RCM_BASE) +#define RCM_BASE_PTR (RCM) +/** Array initializer of RCM peripheral base addresses */ +#define RCM_BASE_ADDRS { RCM_BASE } +/** Array initializer of RCM peripheral base pointers */ +#define RCM_BASE_PTRS { RCM } + +/* ---------------------------------------------------------------------------- + -- RCM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RCM_Register_Accessor_Macros RCM - Register accessor macros + * @{ + */ + + +/* RCM - Register instance definitions */ +/* RCM */ +#define RCM_SRS0 RCM_SRS0_REG(RCM) +#define RCM_SRS1 RCM_SRS1_REG(RCM) +#define RCM_RPFC RCM_RPFC_REG(RCM) +#define RCM_RPFW RCM_RPFW_REG(RCM) +#define RCM_MR RCM_MR_REG(RCM) +#define RCM_SSRS0 RCM_SSRS0_REG(RCM) +#define RCM_SSRS1 RCM_SSRS1_REG(RCM) + +/*! + * @} + */ /* end of group RCM_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group RCM_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- RFSYS Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFSYS_Peripheral_Access_Layer RFSYS Peripheral Access Layer + * @{ + */ + +/** RFSYS - Register Layout Typedef */ +typedef struct { + __IO uint32_t REG[8]; /**< Register file register, array offset: 0x0, array step: 0x4 */ +} RFSYS_Type, *RFSYS_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- RFSYS - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFSYS_Register_Accessor_Macros RFSYS - Register accessor macros + * @{ + */ + + +/* RFSYS - Register accessors */ +#define RFSYS_REG_REG(base,index) ((base)->REG[index]) + +/*! + * @} + */ /* end of group RFSYS_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- RFSYS Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFSYS_Register_Masks RFSYS Register Masks + * @{ + */ + +/* REG Bit Fields */ +#define RFSYS_REG_LL_MASK 0xFFu +#define RFSYS_REG_LL_SHIFT 0 +#define RFSYS_REG_LL(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_LL_SHIFT))&RFSYS_REG_LL_MASK) +#define RFSYS_REG_LH_MASK 0xFF00u +#define RFSYS_REG_LH_SHIFT 8 +#define RFSYS_REG_LH(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_LH_SHIFT))&RFSYS_REG_LH_MASK) +#define RFSYS_REG_HL_MASK 0xFF0000u +#define RFSYS_REG_HL_SHIFT 16 +#define RFSYS_REG_HL(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_HL_SHIFT))&RFSYS_REG_HL_MASK) +#define RFSYS_REG_HH_MASK 0xFF000000u +#define RFSYS_REG_HH_SHIFT 24 +#define RFSYS_REG_HH(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_HH_SHIFT))&RFSYS_REG_HH_MASK) + +/*! + * @} + */ /* end of group RFSYS_Register_Masks */ + + +/* RFSYS - Peripheral instance base addresses */ +/** Peripheral RFSYS base address */ +#define RFSYS_BASE (0x40041000u) +/** Peripheral RFSYS base pointer */ +#define RFSYS ((RFSYS_Type *)RFSYS_BASE) +#define RFSYS_BASE_PTR (RFSYS) +/** Array initializer of RFSYS peripheral base addresses */ +#define RFSYS_BASE_ADDRS { RFSYS_BASE } +/** Array initializer of RFSYS peripheral base pointers */ +#define RFSYS_BASE_PTRS { RFSYS } + +/* ---------------------------------------------------------------------------- + -- RFSYS - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFSYS_Register_Accessor_Macros RFSYS - Register accessor macros + * @{ + */ + + +/* RFSYS - Register instance definitions */ +/* RFSYS */ +#define RFSYS_REG0 RFSYS_REG_REG(RFSYS,0) +#define RFSYS_REG1 RFSYS_REG_REG(RFSYS,1) +#define RFSYS_REG2 RFSYS_REG_REG(RFSYS,2) +#define RFSYS_REG3 RFSYS_REG_REG(RFSYS,3) +#define RFSYS_REG4 RFSYS_REG_REG(RFSYS,4) +#define RFSYS_REG5 RFSYS_REG_REG(RFSYS,5) +#define RFSYS_REG6 RFSYS_REG_REG(RFSYS,6) +#define RFSYS_REG7 RFSYS_REG_REG(RFSYS,7) + +/* RFSYS - Register array accessors */ +#define RFSYS_REG(index) RFSYS_REG_REG(RFSYS,index) + +/*! + * @} + */ /* end of group RFSYS_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group RFSYS_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- RFVBAT Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFVBAT_Peripheral_Access_Layer RFVBAT Peripheral Access Layer + * @{ + */ + +/** RFVBAT - Register Layout Typedef */ +typedef struct { + __IO uint32_t REG[8]; /**< VBAT register file register, array offset: 0x0, array step: 0x4 */ +} RFVBAT_Type, *RFVBAT_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- RFVBAT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFVBAT_Register_Accessor_Macros RFVBAT - Register accessor macros + * @{ + */ + + +/* RFVBAT - Register accessors */ +#define RFVBAT_REG_REG(base,index) ((base)->REG[index]) + +/*! + * @} + */ /* end of group RFVBAT_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- RFVBAT Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFVBAT_Register_Masks RFVBAT Register Masks + * @{ + */ + +/* REG Bit Fields */ +#define RFVBAT_REG_LL_MASK 0xFFu +#define RFVBAT_REG_LL_SHIFT 0 +#define RFVBAT_REG_LL(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_LL_SHIFT))&RFVBAT_REG_LL_MASK) +#define RFVBAT_REG_LH_MASK 0xFF00u +#define RFVBAT_REG_LH_SHIFT 8 +#define RFVBAT_REG_LH(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_LH_SHIFT))&RFVBAT_REG_LH_MASK) +#define RFVBAT_REG_HL_MASK 0xFF0000u +#define RFVBAT_REG_HL_SHIFT 16 +#define RFVBAT_REG_HL(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_HL_SHIFT))&RFVBAT_REG_HL_MASK) +#define RFVBAT_REG_HH_MASK 0xFF000000u +#define RFVBAT_REG_HH_SHIFT 24 +#define RFVBAT_REG_HH(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_HH_SHIFT))&RFVBAT_REG_HH_MASK) + +/*! + * @} + */ /* end of group RFVBAT_Register_Masks */ + + +/* RFVBAT - Peripheral instance base addresses */ +/** Peripheral RFVBAT base address */ +#define RFVBAT_BASE (0x4003E000u) +/** Peripheral RFVBAT base pointer */ +#define RFVBAT ((RFVBAT_Type *)RFVBAT_BASE) +#define RFVBAT_BASE_PTR (RFVBAT) +/** Array initializer of RFVBAT peripheral base addresses */ +#define RFVBAT_BASE_ADDRS { RFVBAT_BASE } +/** Array initializer of RFVBAT peripheral base pointers */ +#define RFVBAT_BASE_PTRS { RFVBAT } + +/* ---------------------------------------------------------------------------- + -- RFVBAT - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RFVBAT_Register_Accessor_Macros RFVBAT - Register accessor macros + * @{ + */ + + +/* RFVBAT - Register instance definitions */ +/* RFVBAT */ +#define RFVBAT_REG0 RFVBAT_REG_REG(RFVBAT,0) +#define RFVBAT_REG1 RFVBAT_REG_REG(RFVBAT,1) +#define RFVBAT_REG2 RFVBAT_REG_REG(RFVBAT,2) +#define RFVBAT_REG3 RFVBAT_REG_REG(RFVBAT,3) +#define RFVBAT_REG4 RFVBAT_REG_REG(RFVBAT,4) +#define RFVBAT_REG5 RFVBAT_REG_REG(RFVBAT,5) +#define RFVBAT_REG6 RFVBAT_REG_REG(RFVBAT,6) +#define RFVBAT_REG7 RFVBAT_REG_REG(RFVBAT,7) + +/* RFVBAT - Register array accessors */ +#define RFVBAT_REG(index) RFVBAT_REG_REG(RFVBAT,index) + +/*! + * @} + */ /* end of group RFVBAT_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group RFVBAT_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- RNG Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RNG_Peripheral_Access_Layer RNG Peripheral Access Layer + * @{ + */ + +/** RNG - Register Layout Typedef */ +typedef struct { + __IO uint32_t CR; /**< RNGA Control Register, offset: 0x0 */ + __I uint32_t SR; /**< RNGA Status Register, offset: 0x4 */ + __O uint32_t ER; /**< RNGA Entropy Register, offset: 0x8 */ + __I uint32_t OR; /**< RNGA Output Register, offset: 0xC */ +} RNG_Type, *RNG_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- RNG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RNG_Register_Accessor_Macros RNG - Register accessor macros + * @{ + */ + + +/* RNG - Register accessors */ +#define RNG_CR_REG(base) ((base)->CR) +#define RNG_SR_REG(base) ((base)->SR) +#define RNG_ER_REG(base) ((base)->ER) +#define RNG_OR_REG(base) ((base)->OR) + +/*! + * @} + */ /* end of group RNG_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- RNG Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RNG_Register_Masks RNG Register Masks + * @{ + */ + +/* CR Bit Fields */ +#define RNG_CR_GO_MASK 0x1u +#define RNG_CR_GO_SHIFT 0 +#define RNG_CR_HA_MASK 0x2u +#define RNG_CR_HA_SHIFT 1 +#define RNG_CR_INTM_MASK 0x4u +#define RNG_CR_INTM_SHIFT 2 +#define RNG_CR_CLRI_MASK 0x8u +#define RNG_CR_CLRI_SHIFT 3 +#define RNG_CR_SLP_MASK 0x10u +#define RNG_CR_SLP_SHIFT 4 +/* SR Bit Fields */ +#define RNG_SR_SECV_MASK 0x1u +#define RNG_SR_SECV_SHIFT 0 +#define RNG_SR_LRS_MASK 0x2u +#define RNG_SR_LRS_SHIFT 1 +#define RNG_SR_ORU_MASK 0x4u +#define RNG_SR_ORU_SHIFT 2 +#define RNG_SR_ERRI_MASK 0x8u +#define RNG_SR_ERRI_SHIFT 3 +#define RNG_SR_SLP_MASK 0x10u +#define RNG_SR_SLP_SHIFT 4 +#define RNG_SR_OREG_LVL_MASK 0xFF00u +#define RNG_SR_OREG_LVL_SHIFT 8 +#define RNG_SR_OREG_LVL(x) (((uint32_t)(((uint32_t)(x))<<RNG_SR_OREG_LVL_SHIFT))&RNG_SR_OREG_LVL_MASK) +#define RNG_SR_OREG_SIZE_MASK 0xFF0000u +#define RNG_SR_OREG_SIZE_SHIFT 16 +#define RNG_SR_OREG_SIZE(x) (((uint32_t)(((uint32_t)(x))<<RNG_SR_OREG_SIZE_SHIFT))&RNG_SR_OREG_SIZE_MASK) +/* ER Bit Fields */ +#define RNG_ER_EXT_ENT_MASK 0xFFFFFFFFu +#define RNG_ER_EXT_ENT_SHIFT 0 +#define RNG_ER_EXT_ENT(x) (((uint32_t)(((uint32_t)(x))<<RNG_ER_EXT_ENT_SHIFT))&RNG_ER_EXT_ENT_MASK) +/* OR Bit Fields */ +#define RNG_OR_RANDOUT_MASK 0xFFFFFFFFu +#define RNG_OR_RANDOUT_SHIFT 0 +#define RNG_OR_RANDOUT(x) (((uint32_t)(((uint32_t)(x))<<RNG_OR_RANDOUT_SHIFT))&RNG_OR_RANDOUT_MASK) + +/*! + * @} + */ /* end of group RNG_Register_Masks */ + + +/* RNG - Peripheral instance base addresses */ +/** Peripheral RNG base address */ +#define RNG_BASE (0x40029000u) +/** Peripheral RNG base pointer */ +#define RNG ((RNG_Type *)RNG_BASE) +#define RNG_BASE_PTR (RNG) +/** Array initializer of RNG peripheral base addresses */ +#define RNG_BASE_ADDRS { RNG_BASE } +/** Array initializer of RNG peripheral base pointers */ +#define RNG_BASE_PTRS { RNG } +/** Interrupt vectors for the RNG peripheral type */ +#define RNG_IRQS { RNG_IRQn } + +/* ---------------------------------------------------------------------------- + -- RNG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RNG_Register_Accessor_Macros RNG - Register accessor macros + * @{ + */ + + +/* RNG - Register instance definitions */ +/* RNG */ +#define RNG_CR RNG_CR_REG(RNG) +#define RNG_SR RNG_SR_REG(RNG) +#define RNG_ER RNG_ER_REG(RNG) +#define RNG_OR RNG_OR_REG(RNG) + +/*! + * @} + */ /* end of group RNG_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group RNG_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- RTC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RTC_Peripheral_Access_Layer RTC Peripheral Access Layer + * @{ + */ + +/** RTC - Register Layout Typedef */ +typedef struct { + __IO uint32_t TSR; /**< RTC Time Seconds Register, offset: 0x0 */ + __IO uint32_t TPR; /**< RTC Time Prescaler Register, offset: 0x4 */ + __IO uint32_t TAR; /**< RTC Time Alarm Register, offset: 0x8 */ + __IO uint32_t TCR; /**< RTC Time Compensation Register, offset: 0xC */ + __IO uint32_t CR; /**< RTC Control Register, offset: 0x10 */ + __IO uint32_t SR; /**< RTC Status Register, offset: 0x14 */ + __IO uint32_t LR; /**< RTC Lock Register, offset: 0x18 */ + __IO uint32_t IER; /**< RTC Interrupt Enable Register, offset: 0x1C */ + uint8_t RESERVED_0[2016]; + __IO uint32_t WAR; /**< RTC Write Access Register, offset: 0x800 */ + __IO uint32_t RAR; /**< RTC Read Access Register, offset: 0x804 */ +} RTC_Type, *RTC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- RTC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RTC_Register_Accessor_Macros RTC - Register accessor macros + * @{ + */ + + +/* RTC - Register accessors */ +#define RTC_TSR_REG(base) ((base)->TSR) +#define RTC_TPR_REG(base) ((base)->TPR) +#define RTC_TAR_REG(base) ((base)->TAR) +#define RTC_TCR_REG(base) ((base)->TCR) +#define RTC_CR_REG(base) ((base)->CR) +#define RTC_SR_REG(base) ((base)->SR) +#define RTC_LR_REG(base) ((base)->LR) +#define RTC_IER_REG(base) ((base)->IER) +#define RTC_WAR_REG(base) ((base)->WAR) +#define RTC_RAR_REG(base) ((base)->RAR) + +/*! + * @} + */ /* end of group RTC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- RTC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RTC_Register_Masks RTC Register Masks + * @{ + */ + +/* TSR Bit Fields */ +#define RTC_TSR_TSR_MASK 0xFFFFFFFFu +#define RTC_TSR_TSR_SHIFT 0 +#define RTC_TSR_TSR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TSR_TSR_SHIFT))&RTC_TSR_TSR_MASK) +/* TPR Bit Fields */ +#define RTC_TPR_TPR_MASK 0xFFFFu +#define RTC_TPR_TPR_SHIFT 0 +#define RTC_TPR_TPR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TPR_TPR_SHIFT))&RTC_TPR_TPR_MASK) +/* TAR Bit Fields */ +#define RTC_TAR_TAR_MASK 0xFFFFFFFFu +#define RTC_TAR_TAR_SHIFT 0 +#define RTC_TAR_TAR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TAR_TAR_SHIFT))&RTC_TAR_TAR_MASK) +/* TCR Bit Fields */ +#define RTC_TCR_TCR_MASK 0xFFu +#define RTC_TCR_TCR_SHIFT 0 +#define RTC_TCR_TCR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_TCR_SHIFT))&RTC_TCR_TCR_MASK) +#define RTC_TCR_CIR_MASK 0xFF00u +#define RTC_TCR_CIR_SHIFT 8 +#define RTC_TCR_CIR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_CIR_SHIFT))&RTC_TCR_CIR_MASK) +#define RTC_TCR_TCV_MASK 0xFF0000u +#define RTC_TCR_TCV_SHIFT 16 +#define RTC_TCR_TCV(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_TCV_SHIFT))&RTC_TCR_TCV_MASK) +#define RTC_TCR_CIC_MASK 0xFF000000u +#define RTC_TCR_CIC_SHIFT 24 +#define RTC_TCR_CIC(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_CIC_SHIFT))&RTC_TCR_CIC_MASK) +/* CR Bit Fields */ +#define RTC_CR_SWR_MASK 0x1u +#define RTC_CR_SWR_SHIFT 0 +#define RTC_CR_WPE_MASK 0x2u +#define RTC_CR_WPE_SHIFT 1 +#define RTC_CR_SUP_MASK 0x4u +#define RTC_CR_SUP_SHIFT 2 +#define RTC_CR_UM_MASK 0x8u +#define RTC_CR_UM_SHIFT 3 +#define RTC_CR_WPS_MASK 0x10u +#define RTC_CR_WPS_SHIFT 4 +#define RTC_CR_OSCE_MASK 0x100u +#define RTC_CR_OSCE_SHIFT 8 +#define RTC_CR_CLKO_MASK 0x200u +#define RTC_CR_CLKO_SHIFT 9 +#define RTC_CR_SC16P_MASK 0x400u +#define RTC_CR_SC16P_SHIFT 10 +#define RTC_CR_SC8P_MASK 0x800u +#define RTC_CR_SC8P_SHIFT 11 +#define RTC_CR_SC4P_MASK 0x1000u +#define RTC_CR_SC4P_SHIFT 12 +#define RTC_CR_SC2P_MASK 0x2000u +#define RTC_CR_SC2P_SHIFT 13 +/* SR Bit Fields */ +#define RTC_SR_TIF_MASK 0x1u +#define RTC_SR_TIF_SHIFT 0 +#define RTC_SR_TOF_MASK 0x2u +#define RTC_SR_TOF_SHIFT 1 +#define RTC_SR_TAF_MASK 0x4u +#define RTC_SR_TAF_SHIFT 2 +#define RTC_SR_TCE_MASK 0x10u +#define RTC_SR_TCE_SHIFT 4 +/* LR Bit Fields */ +#define RTC_LR_TCL_MASK 0x8u +#define RTC_LR_TCL_SHIFT 3 +#define RTC_LR_CRL_MASK 0x10u +#define RTC_LR_CRL_SHIFT 4 +#define RTC_LR_SRL_MASK 0x20u +#define RTC_LR_SRL_SHIFT 5 +#define RTC_LR_LRL_MASK 0x40u +#define RTC_LR_LRL_SHIFT 6 +/* IER Bit Fields */ +#define RTC_IER_TIIE_MASK 0x1u +#define RTC_IER_TIIE_SHIFT 0 +#define RTC_IER_TOIE_MASK 0x2u +#define RTC_IER_TOIE_SHIFT 1 +#define RTC_IER_TAIE_MASK 0x4u +#define RTC_IER_TAIE_SHIFT 2 +#define RTC_IER_TSIE_MASK 0x10u +#define RTC_IER_TSIE_SHIFT 4 +#define RTC_IER_WPON_MASK 0x80u +#define RTC_IER_WPON_SHIFT 7 +/* WAR Bit Fields */ +#define RTC_WAR_TSRW_MASK 0x1u +#define RTC_WAR_TSRW_SHIFT 0 +#define RTC_WAR_TPRW_MASK 0x2u +#define RTC_WAR_TPRW_SHIFT 1 +#define RTC_WAR_TARW_MASK 0x4u +#define RTC_WAR_TARW_SHIFT 2 +#define RTC_WAR_TCRW_MASK 0x8u +#define RTC_WAR_TCRW_SHIFT 3 +#define RTC_WAR_CRW_MASK 0x10u +#define RTC_WAR_CRW_SHIFT 4 +#define RTC_WAR_SRW_MASK 0x20u +#define RTC_WAR_SRW_SHIFT 5 +#define RTC_WAR_LRW_MASK 0x40u +#define RTC_WAR_LRW_SHIFT 6 +#define RTC_WAR_IERW_MASK 0x80u +#define RTC_WAR_IERW_SHIFT 7 +/* RAR Bit Fields */ +#define RTC_RAR_TSRR_MASK 0x1u +#define RTC_RAR_TSRR_SHIFT 0 +#define RTC_RAR_TPRR_MASK 0x2u +#define RTC_RAR_TPRR_SHIFT 1 +#define RTC_RAR_TARR_MASK 0x4u +#define RTC_RAR_TARR_SHIFT 2 +#define RTC_RAR_TCRR_MASK 0x8u +#define RTC_RAR_TCRR_SHIFT 3 +#define RTC_RAR_CRR_MASK 0x10u +#define RTC_RAR_CRR_SHIFT 4 +#define RTC_RAR_SRR_MASK 0x20u +#define RTC_RAR_SRR_SHIFT 5 +#define RTC_RAR_LRR_MASK 0x40u +#define RTC_RAR_LRR_SHIFT 6 +#define RTC_RAR_IERR_MASK 0x80u +#define RTC_RAR_IERR_SHIFT 7 + +/*! + * @} + */ /* end of group RTC_Register_Masks */ + + +/* RTC - Peripheral instance base addresses */ +/** Peripheral RTC base address */ +#define RTC_BASE (0x4003D000u) +/** Peripheral RTC base pointer */ +#define RTC ((RTC_Type *)RTC_BASE) +#define RTC_BASE_PTR (RTC) +/** Array initializer of RTC peripheral base addresses */ +#define RTC_BASE_ADDRS { RTC_BASE } +/** Array initializer of RTC peripheral base pointers */ +#define RTC_BASE_PTRS { RTC } +/** Interrupt vectors for the RTC peripheral type */ +#define RTC_IRQS { RTC_IRQn } +#define RTC_SECONDS_IRQS { RTC_Seconds_IRQn } + +/* ---------------------------------------------------------------------------- + -- RTC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup RTC_Register_Accessor_Macros RTC - Register accessor macros + * @{ + */ + + +/* RTC - Register instance definitions */ +/* RTC */ +#define RTC_TSR RTC_TSR_REG(RTC) +#define RTC_TPR RTC_TPR_REG(RTC) +#define RTC_TAR RTC_TAR_REG(RTC) +#define RTC_TCR RTC_TCR_REG(RTC) +#define RTC_CR RTC_CR_REG(RTC) +#define RTC_SR RTC_SR_REG(RTC) +#define RTC_LR RTC_LR_REG(RTC) +#define RTC_IER RTC_IER_REG(RTC) +#define RTC_WAR RTC_WAR_REG(RTC) +#define RTC_RAR RTC_RAR_REG(RTC) + +/*! + * @} + */ /* end of group RTC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group RTC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- SIM Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SIM_Peripheral_Access_Layer SIM Peripheral Access Layer + * @{ + */ + +/** SIM - Register Layout Typedef */ +typedef struct { + __IO uint32_t SOPT1; /**< System Options Register 1, offset: 0x0 */ + __IO uint32_t SOPT1CFG; /**< SOPT1 Configuration Register, offset: 0x4 */ + uint8_t RESERVED_0[4092]; + __IO uint32_t SOPT2; /**< System Options Register 2, offset: 0x1004 */ + uint8_t RESERVED_1[4]; + __IO uint32_t SOPT4; /**< System Options Register 4, offset: 0x100C */ + __IO uint32_t SOPT5; /**< System Options Register 5, offset: 0x1010 */ + uint8_t RESERVED_2[4]; + __IO uint32_t SOPT7; /**< System Options Register 7, offset: 0x1018 */ + __IO uint32_t SOPT8; /**< System Options Register 8, offset: 0x101C */ + uint8_t RESERVED_3[4]; + __I uint32_t SDID; /**< System Device Identification Register, offset: 0x1024 */ + uint8_t RESERVED_4[12]; + __IO uint32_t SCGC4; /**< System Clock Gating Control Register 4, offset: 0x1034 */ + __IO uint32_t SCGC5; /**< System Clock Gating Control Register 5, offset: 0x1038 */ + __IO uint32_t SCGC6; /**< System Clock Gating Control Register 6, offset: 0x103C */ + __IO uint32_t SCGC7; /**< System Clock Gating Control Register 7, offset: 0x1040 */ + __IO uint32_t CLKDIV1; /**< System Clock Divider Register 1, offset: 0x1044 */ + __IO uint32_t CLKDIV2; /**< System Clock Divider Register 2, offset: 0x1048 */ + __IO uint32_t FCFG1; /**< Flash Configuration Register 1, offset: 0x104C */ + __I uint32_t FCFG2; /**< Flash Configuration Register 2, offset: 0x1050 */ + __I uint32_t UIDH; /**< Unique Identification Register High, offset: 0x1054 */ + __I uint32_t UIDMH; /**< Unique Identification Register Mid-High, offset: 0x1058 */ + __I uint32_t UIDML; /**< Unique Identification Register Mid Low, offset: 0x105C */ + __I uint32_t UIDL; /**< Unique Identification Register Low, offset: 0x1060 */ +} SIM_Type, *SIM_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- SIM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SIM_Register_Accessor_Macros SIM - Register accessor macros + * @{ + */ + + +/* SIM - Register accessors */ +#define SIM_SOPT1_REG(base) ((base)->SOPT1) +#define SIM_SOPT1CFG_REG(base) ((base)->SOPT1CFG) +#define SIM_SOPT2_REG(base) ((base)->SOPT2) +#define SIM_SOPT4_REG(base) ((base)->SOPT4) +#define SIM_SOPT5_REG(base) ((base)->SOPT5) +#define SIM_SOPT7_REG(base) ((base)->SOPT7) +#define SIM_SOPT8_REG(base) ((base)->SOPT8) +#define SIM_SDID_REG(base) ((base)->SDID) +#define SIM_SCGC4_REG(base) ((base)->SCGC4) +#define SIM_SCGC5_REG(base) ((base)->SCGC5) +#define SIM_SCGC6_REG(base) ((base)->SCGC6) +#define SIM_SCGC7_REG(base) ((base)->SCGC7) +#define SIM_CLKDIV1_REG(base) ((base)->CLKDIV1) +#define SIM_CLKDIV2_REG(base) ((base)->CLKDIV2) +#define SIM_FCFG1_REG(base) ((base)->FCFG1) +#define SIM_FCFG2_REG(base) ((base)->FCFG2) +#define SIM_UIDH_REG(base) ((base)->UIDH) +#define SIM_UIDMH_REG(base) ((base)->UIDMH) +#define SIM_UIDML_REG(base) ((base)->UIDML) +#define SIM_UIDL_REG(base) ((base)->UIDL) + +/*! + * @} + */ /* end of group SIM_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- SIM Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SIM_Register_Masks SIM Register Masks + * @{ + */ + +/* SOPT1 Bit Fields */ +#define SIM_SOPT1_RAMSIZE_MASK 0xF000u +#define SIM_SOPT1_RAMSIZE_SHIFT 12 +#define SIM_SOPT1_RAMSIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT1_RAMSIZE_SHIFT))&SIM_SOPT1_RAMSIZE_MASK) +#define SIM_SOPT1_OSC32KOUT_MASK 0x30000u +#define SIM_SOPT1_OSC32KOUT_SHIFT 16 +#define SIM_SOPT1_OSC32KOUT(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT1_OSC32KOUT_SHIFT))&SIM_SOPT1_OSC32KOUT_MASK) +#define SIM_SOPT1_OSC32KSEL_MASK 0xC0000u +#define SIM_SOPT1_OSC32KSEL_SHIFT 18 +#define SIM_SOPT1_OSC32KSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT1_OSC32KSEL_SHIFT))&SIM_SOPT1_OSC32KSEL_MASK) +#define SIM_SOPT1_USBVSTBY_MASK 0x20000000u +#define SIM_SOPT1_USBVSTBY_SHIFT 29 +#define SIM_SOPT1_USBSSTBY_MASK 0x40000000u +#define SIM_SOPT1_USBSSTBY_SHIFT 30 +#define SIM_SOPT1_USBREGEN_MASK 0x80000000u +#define SIM_SOPT1_USBREGEN_SHIFT 31 +/* SOPT1CFG Bit Fields */ +#define SIM_SOPT1CFG_URWE_MASK 0x1000000u +#define SIM_SOPT1CFG_URWE_SHIFT 24 +#define SIM_SOPT1CFG_UVSWE_MASK 0x2000000u +#define SIM_SOPT1CFG_UVSWE_SHIFT 25 +#define SIM_SOPT1CFG_USSWE_MASK 0x4000000u +#define SIM_SOPT1CFG_USSWE_SHIFT 26 +/* SOPT2 Bit Fields */ +#define SIM_SOPT2_RTCCLKOUTSEL_MASK 0x10u +#define SIM_SOPT2_RTCCLKOUTSEL_SHIFT 4 +#define SIM_SOPT2_CLKOUTSEL_MASK 0xE0u +#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 +#define SIM_SOPT2_CLKOUTSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_CLKOUTSEL_SHIFT))&SIM_SOPT2_CLKOUTSEL_MASK) +#define SIM_SOPT2_FBSL_MASK 0x300u +#define SIM_SOPT2_FBSL_SHIFT 8 +#define SIM_SOPT2_FBSL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_FBSL_SHIFT))&SIM_SOPT2_FBSL_MASK) +#define SIM_SOPT2_TRACECLKSEL_MASK 0x1000u +#define SIM_SOPT2_TRACECLKSEL_SHIFT 12 +#define SIM_SOPT2_PLLFLLSEL_MASK 0x30000u +#define SIM_SOPT2_PLLFLLSEL_SHIFT 16 +#define SIM_SOPT2_PLLFLLSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_PLLFLLSEL_SHIFT))&SIM_SOPT2_PLLFLLSEL_MASK) +#define SIM_SOPT2_USBSRC_MASK 0x40000u +#define SIM_SOPT2_USBSRC_SHIFT 18 +#define SIM_SOPT2_LPUARTSRC_MASK 0xC000000u +#define SIM_SOPT2_LPUARTSRC_SHIFT 26 +#define SIM_SOPT2_LPUARTSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_LPUARTSRC_SHIFT))&SIM_SOPT2_LPUARTSRC_MASK) +/* SOPT4 Bit Fields */ +#define SIM_SOPT4_FTM0FLT0_MASK 0x1u +#define SIM_SOPT4_FTM0FLT0_SHIFT 0 +#define SIM_SOPT4_FTM0FLT1_MASK 0x2u +#define SIM_SOPT4_FTM0FLT1_SHIFT 1 +#define SIM_SOPT4_FTM1FLT0_MASK 0x10u +#define SIM_SOPT4_FTM1FLT0_SHIFT 4 +#define SIM_SOPT4_FTM2FLT0_MASK 0x100u +#define SIM_SOPT4_FTM2FLT0_SHIFT 8 +#define SIM_SOPT4_FTM3FLT0_MASK 0x1000u +#define SIM_SOPT4_FTM3FLT0_SHIFT 12 +#define SIM_SOPT4_FTM1CH0SRC_MASK 0xC0000u +#define SIM_SOPT4_FTM1CH0SRC_SHIFT 18 +#define SIM_SOPT4_FTM1CH0SRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT4_FTM1CH0SRC_SHIFT))&SIM_SOPT4_FTM1CH0SRC_MASK) +#define SIM_SOPT4_FTM2CH0SRC_MASK 0x300000u +#define SIM_SOPT4_FTM2CH0SRC_SHIFT 20 +#define SIM_SOPT4_FTM2CH0SRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT4_FTM2CH0SRC_SHIFT))&SIM_SOPT4_FTM2CH0SRC_MASK) +#define SIM_SOPT4_FTM2CH1SRC_MASK 0x400000u +#define SIM_SOPT4_FTM2CH1SRC_SHIFT 22 +#define SIM_SOPT4_FTM0CLKSEL_MASK 0x1000000u +#define SIM_SOPT4_FTM0CLKSEL_SHIFT 24 +#define SIM_SOPT4_FTM1CLKSEL_MASK 0x2000000u +#define SIM_SOPT4_FTM1CLKSEL_SHIFT 25 +#define SIM_SOPT4_FTM2CLKSEL_MASK 0x4000000u +#define SIM_SOPT4_FTM2CLKSEL_SHIFT 26 +#define SIM_SOPT4_FTM3CLKSEL_MASK 0x8000000u +#define SIM_SOPT4_FTM3CLKSEL_SHIFT 27 +#define SIM_SOPT4_FTM0TRG0SRC_MASK 0x10000000u +#define SIM_SOPT4_FTM0TRG0SRC_SHIFT 28 +#define SIM_SOPT4_FTM0TRG1SRC_MASK 0x20000000u +#define SIM_SOPT4_FTM0TRG1SRC_SHIFT 29 +#define SIM_SOPT4_FTM3TRG0SRC_MASK 0x40000000u +#define SIM_SOPT4_FTM3TRG0SRC_SHIFT 30 +#define SIM_SOPT4_FTM3TRG1SRC_MASK 0x80000000u +#define SIM_SOPT4_FTM3TRG1SRC_SHIFT 31 +/* SOPT5 Bit Fields */ +#define SIM_SOPT5_UART0TXSRC_MASK 0x3u +#define SIM_SOPT5_UART0TXSRC_SHIFT 0 +#define SIM_SOPT5_UART0TXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART0TXSRC_SHIFT))&SIM_SOPT5_UART0TXSRC_MASK) +#define SIM_SOPT5_UART0RXSRC_MASK 0xCu +#define SIM_SOPT5_UART0RXSRC_SHIFT 2 +#define SIM_SOPT5_UART0RXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART0RXSRC_SHIFT))&SIM_SOPT5_UART0RXSRC_MASK) +#define SIM_SOPT5_UART1TXSRC_MASK 0x30u +#define SIM_SOPT5_UART1TXSRC_SHIFT 4 +#define SIM_SOPT5_UART1TXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART1TXSRC_SHIFT))&SIM_SOPT5_UART1TXSRC_MASK) +#define SIM_SOPT5_UART1RXSRC_MASK 0xC0u +#define SIM_SOPT5_UART1RXSRC_SHIFT 6 +#define SIM_SOPT5_UART1RXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART1RXSRC_SHIFT))&SIM_SOPT5_UART1RXSRC_MASK) +#define SIM_SOPT5_LPUART0RXSRC_MASK 0xC0000u +#define SIM_SOPT5_LPUART0RXSRC_SHIFT 18 +#define SIM_SOPT5_LPUART0RXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_LPUART0RXSRC_SHIFT))&SIM_SOPT5_LPUART0RXSRC_MASK) +/* SOPT7 Bit Fields */ +#define SIM_SOPT7_ADC0TRGSEL_MASK 0xFu +#define SIM_SOPT7_ADC0TRGSEL_SHIFT 0 +#define SIM_SOPT7_ADC0TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT7_ADC0TRGSEL_SHIFT))&SIM_SOPT7_ADC0TRGSEL_MASK) +#define SIM_SOPT7_ADC0PRETRGSEL_MASK 0x10u +#define SIM_SOPT7_ADC0PRETRGSEL_SHIFT 4 +#define SIM_SOPT7_ADC0ALTTRGEN_MASK 0x80u +#define SIM_SOPT7_ADC0ALTTRGEN_SHIFT 7 +#define SIM_SOPT7_ADC1TRGSEL_MASK 0xF00u +#define SIM_SOPT7_ADC1TRGSEL_SHIFT 8 +#define SIM_SOPT7_ADC1TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT7_ADC1TRGSEL_SHIFT))&SIM_SOPT7_ADC1TRGSEL_MASK) +#define SIM_SOPT7_ADC1PRETRGSEL_MASK 0x1000u +#define SIM_SOPT7_ADC1PRETRGSEL_SHIFT 12 +#define SIM_SOPT7_ADC1ALTTRGEN_MASK 0x8000u +#define SIM_SOPT7_ADC1ALTTRGEN_SHIFT 15 +/* SOPT8 Bit Fields */ +#define SIM_SOPT8_FTM0SYNCBIT_MASK 0x1u +#define SIM_SOPT8_FTM0SYNCBIT_SHIFT 0 +#define SIM_SOPT8_FTM1SYNCBIT_MASK 0x2u +#define SIM_SOPT8_FTM1SYNCBIT_SHIFT 1 +#define SIM_SOPT8_FTM2SYNCBIT_MASK 0x4u +#define SIM_SOPT8_FTM2SYNCBIT_SHIFT 2 +#define SIM_SOPT8_FTM3SYNCBIT_MASK 0x8u +#define SIM_SOPT8_FTM3SYNCBIT_SHIFT 3 +#define SIM_SOPT8_FTM0OCH0SRC_MASK 0x10000u +#define SIM_SOPT8_FTM0OCH0SRC_SHIFT 16 +#define SIM_SOPT8_FTM0OCH1SRC_MASK 0x20000u +#define SIM_SOPT8_FTM0OCH1SRC_SHIFT 17 +#define SIM_SOPT8_FTM0OCH2SRC_MASK 0x40000u +#define SIM_SOPT8_FTM0OCH2SRC_SHIFT 18 +#define SIM_SOPT8_FTM0OCH3SRC_MASK 0x80000u +#define SIM_SOPT8_FTM0OCH3SRC_SHIFT 19 +#define SIM_SOPT8_FTM0OCH4SRC_MASK 0x100000u +#define SIM_SOPT8_FTM0OCH4SRC_SHIFT 20 +#define SIM_SOPT8_FTM0OCH5SRC_MASK 0x200000u +#define SIM_SOPT8_FTM0OCH5SRC_SHIFT 21 +#define SIM_SOPT8_FTM0OCH6SRC_MASK 0x400000u +#define SIM_SOPT8_FTM0OCH6SRC_SHIFT 22 +#define SIM_SOPT8_FTM0OCH7SRC_MASK 0x800000u +#define SIM_SOPT8_FTM0OCH7SRC_SHIFT 23 +#define SIM_SOPT8_FTM3OCH0SRC_MASK 0x1000000u +#define SIM_SOPT8_FTM3OCH0SRC_SHIFT 24 +#define SIM_SOPT8_FTM3OCH1SRC_MASK 0x2000000u +#define SIM_SOPT8_FTM3OCH1SRC_SHIFT 25 +#define SIM_SOPT8_FTM3OCH2SRC_MASK 0x4000000u +#define SIM_SOPT8_FTM3OCH2SRC_SHIFT 26 +#define SIM_SOPT8_FTM3OCH3SRC_MASK 0x8000000u +#define SIM_SOPT8_FTM3OCH3SRC_SHIFT 27 +#define SIM_SOPT8_FTM3OCH4SRC_MASK 0x10000000u +#define SIM_SOPT8_FTM3OCH4SRC_SHIFT 28 +#define SIM_SOPT8_FTM3OCH5SRC_MASK 0x20000000u +#define SIM_SOPT8_FTM3OCH5SRC_SHIFT 29 +#define SIM_SOPT8_FTM3OCH6SRC_MASK 0x40000000u +#define SIM_SOPT8_FTM3OCH6SRC_SHIFT 30 +#define SIM_SOPT8_FTM3OCH7SRC_MASK 0x80000000u +#define SIM_SOPT8_FTM3OCH7SRC_SHIFT 31 +/* SDID Bit Fields */ +#define SIM_SDID_PINID_MASK 0xFu +#define SIM_SDID_PINID_SHIFT 0 +#define SIM_SDID_PINID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_PINID_SHIFT))&SIM_SDID_PINID_MASK) +#define SIM_SDID_FAMID_MASK 0x70u +#define SIM_SDID_FAMID_SHIFT 4 +#define SIM_SDID_FAMID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_FAMID_SHIFT))&SIM_SDID_FAMID_MASK) +#define SIM_SDID_DIEID_MASK 0xF80u +#define SIM_SDID_DIEID_SHIFT 7 +#define SIM_SDID_DIEID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_DIEID_SHIFT))&SIM_SDID_DIEID_MASK) +#define SIM_SDID_REVID_MASK 0xF000u +#define SIM_SDID_REVID_SHIFT 12 +#define SIM_SDID_REVID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_REVID_SHIFT))&SIM_SDID_REVID_MASK) +#define SIM_SDID_SERIESID_MASK 0xF00000u +#define SIM_SDID_SERIESID_SHIFT 20 +#define SIM_SDID_SERIESID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_SERIESID_SHIFT))&SIM_SDID_SERIESID_MASK) +#define SIM_SDID_SUBFAMID_MASK 0xF000000u +#define SIM_SDID_SUBFAMID_SHIFT 24 +#define SIM_SDID_SUBFAMID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_SUBFAMID_SHIFT))&SIM_SDID_SUBFAMID_MASK) +#define SIM_SDID_FAMILYID_MASK 0xF0000000u +#define SIM_SDID_FAMILYID_SHIFT 28 +#define SIM_SDID_FAMILYID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_FAMILYID_SHIFT))&SIM_SDID_FAMILYID_MASK) +/* SCGC4 Bit Fields */ +#define SIM_SCGC4_EWM_MASK 0x2u +#define SIM_SCGC4_EWM_SHIFT 1 +#define SIM_SCGC4_I2C0_MASK 0x40u +#define SIM_SCGC4_I2C0_SHIFT 6 +#define SIM_SCGC4_I2C1_MASK 0x80u +#define SIM_SCGC4_I2C1_SHIFT 7 +#define SIM_SCGC4_UART0_MASK 0x400u +#define SIM_SCGC4_UART0_SHIFT 10 +#define SIM_SCGC4_UART1_MASK 0x800u +#define SIM_SCGC4_UART1_SHIFT 11 +#define SIM_SCGC4_UART2_MASK 0x1000u +#define SIM_SCGC4_UART2_SHIFT 12 +#define SIM_SCGC4_USBOTG_MASK 0x40000u +#define SIM_SCGC4_USBOTG_SHIFT 18 +#define SIM_SCGC4_CMP_MASK 0x80000u +#define SIM_SCGC4_CMP_SHIFT 19 +#define SIM_SCGC4_VREF_MASK 0x100000u +#define SIM_SCGC4_VREF_SHIFT 20 +/* SCGC5 Bit Fields */ +#define SIM_SCGC5_LPTMR_MASK 0x1u +#define SIM_SCGC5_LPTMR_SHIFT 0 +#define SIM_SCGC5_PORTA_MASK 0x200u +#define SIM_SCGC5_PORTA_SHIFT 9 +#define SIM_SCGC5_PORTB_MASK 0x400u +#define SIM_SCGC5_PORTB_SHIFT 10 +#define SIM_SCGC5_PORTC_MASK 0x800u +#define SIM_SCGC5_PORTC_SHIFT 11 +#define SIM_SCGC5_PORTD_MASK 0x1000u +#define SIM_SCGC5_PORTD_SHIFT 12 +#define SIM_SCGC5_PORTE_MASK 0x2000u +#define SIM_SCGC5_PORTE_SHIFT 13 +/* SCGC6 Bit Fields */ +#define SIM_SCGC6_FTF_MASK 0x1u +#define SIM_SCGC6_FTF_SHIFT 0 +#define SIM_SCGC6_DMAMUX_MASK 0x2u +#define SIM_SCGC6_DMAMUX_SHIFT 1 +#define SIM_SCGC6_FTM3_MASK 0x40u +#define SIM_SCGC6_FTM3_SHIFT 6 +#define SIM_SCGC6_ADC1_MASK 0x80u +#define SIM_SCGC6_ADC1_SHIFT 7 +#define SIM_SCGC6_DAC1_MASK 0x100u +#define SIM_SCGC6_DAC1_SHIFT 8 +#define SIM_SCGC6_RNGA_MASK 0x200u +#define SIM_SCGC6_RNGA_SHIFT 9 +#define SIM_SCGC6_LPUART0_MASK 0x400u +#define SIM_SCGC6_LPUART0_SHIFT 10 +#define SIM_SCGC6_SPI0_MASK 0x1000u +#define SIM_SCGC6_SPI0_SHIFT 12 +#define SIM_SCGC6_SPI1_MASK 0x2000u +#define SIM_SCGC6_SPI1_SHIFT 13 +#define SIM_SCGC6_I2S_MASK 0x8000u +#define SIM_SCGC6_I2S_SHIFT 15 +#define SIM_SCGC6_CRC_MASK 0x40000u +#define SIM_SCGC6_CRC_SHIFT 18 +#define SIM_SCGC6_PDB_MASK 0x400000u +#define SIM_SCGC6_PDB_SHIFT 22 +#define SIM_SCGC6_PIT_MASK 0x800000u +#define SIM_SCGC6_PIT_SHIFT 23 +#define SIM_SCGC6_FTM0_MASK 0x1000000u +#define SIM_SCGC6_FTM0_SHIFT 24 +#define SIM_SCGC6_FTM1_MASK 0x2000000u +#define SIM_SCGC6_FTM1_SHIFT 25 +#define SIM_SCGC6_FTM2_MASK 0x4000000u +#define SIM_SCGC6_FTM2_SHIFT 26 +#define SIM_SCGC6_ADC0_MASK 0x8000000u +#define SIM_SCGC6_ADC0_SHIFT 27 +#define SIM_SCGC6_RTC_MASK 0x20000000u +#define SIM_SCGC6_RTC_SHIFT 29 +#define SIM_SCGC6_DAC0_MASK 0x80000000u +#define SIM_SCGC6_DAC0_SHIFT 31 +/* SCGC7 Bit Fields */ +#define SIM_SCGC7_FLEXBUS_MASK 0x1u +#define SIM_SCGC7_FLEXBUS_SHIFT 0 +#define SIM_SCGC7_DMA_MASK 0x2u +#define SIM_SCGC7_DMA_SHIFT 1 +/* CLKDIV1 Bit Fields */ +#define SIM_CLKDIV1_OUTDIV4_MASK 0xF0000u +#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 +#define SIM_CLKDIV1_OUTDIV4(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV4_SHIFT))&SIM_CLKDIV1_OUTDIV4_MASK) +#define SIM_CLKDIV1_OUTDIV3_MASK 0xF00000u +#define SIM_CLKDIV1_OUTDIV3_SHIFT 20 +#define SIM_CLKDIV1_OUTDIV3(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV3_SHIFT))&SIM_CLKDIV1_OUTDIV3_MASK) +#define SIM_CLKDIV1_OUTDIV2_MASK 0xF000000u +#define SIM_CLKDIV1_OUTDIV2_SHIFT 24 +#define SIM_CLKDIV1_OUTDIV2(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV2_SHIFT))&SIM_CLKDIV1_OUTDIV2_MASK) +#define SIM_CLKDIV1_OUTDIV1_MASK 0xF0000000u +#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 +#define SIM_CLKDIV1_OUTDIV1(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV1_SHIFT))&SIM_CLKDIV1_OUTDIV1_MASK) +/* CLKDIV2 Bit Fields */ +#define SIM_CLKDIV2_USBFRAC_MASK 0x1u +#define SIM_CLKDIV2_USBFRAC_SHIFT 0 +#define SIM_CLKDIV2_USBDIV_MASK 0xEu +#define SIM_CLKDIV2_USBDIV_SHIFT 1 +#define SIM_CLKDIV2_USBDIV(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV2_USBDIV_SHIFT))&SIM_CLKDIV2_USBDIV_MASK) +/* FCFG1 Bit Fields */ +#define SIM_FCFG1_FLASHDIS_MASK 0x1u +#define SIM_FCFG1_FLASHDIS_SHIFT 0 +#define SIM_FCFG1_FLASHDOZE_MASK 0x2u +#define SIM_FCFG1_FLASHDOZE_SHIFT 1 +#define SIM_FCFG1_PFSIZE_MASK 0xF000000u +#define SIM_FCFG1_PFSIZE_SHIFT 24 +#define SIM_FCFG1_PFSIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG1_PFSIZE_SHIFT))&SIM_FCFG1_PFSIZE_MASK) +/* FCFG2 Bit Fields */ +#define SIM_FCFG2_MAXADDR1_MASK 0x7F0000u +#define SIM_FCFG2_MAXADDR1_SHIFT 16 +#define SIM_FCFG2_MAXADDR1(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG2_MAXADDR1_SHIFT))&SIM_FCFG2_MAXADDR1_MASK) +#define SIM_FCFG2_MAXADDR0_MASK 0x7F000000u +#define SIM_FCFG2_MAXADDR0_SHIFT 24 +#define SIM_FCFG2_MAXADDR0(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG2_MAXADDR0_SHIFT))&SIM_FCFG2_MAXADDR0_MASK) +/* UIDH Bit Fields */ +#define SIM_UIDH_UID_MASK 0xFFFFFFFFu +#define SIM_UIDH_UID_SHIFT 0 +#define SIM_UIDH_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDH_UID_SHIFT))&SIM_UIDH_UID_MASK) +/* UIDMH Bit Fields */ +#define SIM_UIDMH_UID_MASK 0xFFFFFFFFu +#define SIM_UIDMH_UID_SHIFT 0 +#define SIM_UIDMH_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDMH_UID_SHIFT))&SIM_UIDMH_UID_MASK) +/* UIDML Bit Fields */ +#define SIM_UIDML_UID_MASK 0xFFFFFFFFu +#define SIM_UIDML_UID_SHIFT 0 +#define SIM_UIDML_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDML_UID_SHIFT))&SIM_UIDML_UID_MASK) +/* UIDL Bit Fields */ +#define SIM_UIDL_UID_MASK 0xFFFFFFFFu +#define SIM_UIDL_UID_SHIFT 0 +#define SIM_UIDL_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDL_UID_SHIFT))&SIM_UIDL_UID_MASK) + +/*! + * @} + */ /* end of group SIM_Register_Masks */ + + +/* SIM - Peripheral instance base addresses */ +/** Peripheral SIM base address */ +#define SIM_BASE (0x40047000u) +/** Peripheral SIM base pointer */ +#define SIM ((SIM_Type *)SIM_BASE) +#define SIM_BASE_PTR (SIM) +/** Array initializer of SIM peripheral base addresses */ +#define SIM_BASE_ADDRS { SIM_BASE } +/** Array initializer of SIM peripheral base pointers */ +#define SIM_BASE_PTRS { SIM } + +/* ---------------------------------------------------------------------------- + -- SIM - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SIM_Register_Accessor_Macros SIM - Register accessor macros + * @{ + */ + + +/* SIM - Register instance definitions */ +/* SIM */ +#define SIM_SOPT1 SIM_SOPT1_REG(SIM) +#define SIM_SOPT1CFG SIM_SOPT1CFG_REG(SIM) +#define SIM_SOPT2 SIM_SOPT2_REG(SIM) +#define SIM_SOPT4 SIM_SOPT4_REG(SIM) +#define SIM_SOPT5 SIM_SOPT5_REG(SIM) +#define SIM_SOPT7 SIM_SOPT7_REG(SIM) +#define SIM_SOPT8 SIM_SOPT8_REG(SIM) +#define SIM_SDID SIM_SDID_REG(SIM) +#define SIM_SCGC4 SIM_SCGC4_REG(SIM) +#define SIM_SCGC5 SIM_SCGC5_REG(SIM) +#define SIM_SCGC6 SIM_SCGC6_REG(SIM) +#define SIM_SCGC7 SIM_SCGC7_REG(SIM) +#define SIM_CLKDIV1 SIM_CLKDIV1_REG(SIM) +#define SIM_CLKDIV2 SIM_CLKDIV2_REG(SIM) +#define SIM_FCFG1 SIM_FCFG1_REG(SIM) +#define SIM_FCFG2 SIM_FCFG2_REG(SIM) +#define SIM_UIDH SIM_UIDH_REG(SIM) +#define SIM_UIDMH SIM_UIDMH_REG(SIM) +#define SIM_UIDML SIM_UIDML_REG(SIM) +#define SIM_UIDL SIM_UIDL_REG(SIM) + +/*! + * @} + */ /* end of group SIM_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group SIM_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- SMC Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SMC_Peripheral_Access_Layer SMC Peripheral Access Layer + * @{ + */ + +/** SMC - Register Layout Typedef */ +typedef struct { + __IO uint8_t PMPROT; /**< Power Mode Protection register, offset: 0x0 */ + __IO uint8_t PMCTRL; /**< Power Mode Control register, offset: 0x1 */ + __IO uint8_t STOPCTRL; /**< Stop Control Register, offset: 0x2 */ + __I uint8_t PMSTAT; /**< Power Mode Status register, offset: 0x3 */ +} SMC_Type, *SMC_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- SMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SMC_Register_Accessor_Macros SMC - Register accessor macros + * @{ + */ + + +/* SMC - Register accessors */ +#define SMC_PMPROT_REG(base) ((base)->PMPROT) +#define SMC_PMCTRL_REG(base) ((base)->PMCTRL) +#define SMC_STOPCTRL_REG(base) ((base)->STOPCTRL) +#define SMC_PMSTAT_REG(base) ((base)->PMSTAT) + +/*! + * @} + */ /* end of group SMC_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- SMC Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SMC_Register_Masks SMC Register Masks + * @{ + */ + +/* PMPROT Bit Fields */ +#define SMC_PMPROT_AVLLS_MASK 0x2u +#define SMC_PMPROT_AVLLS_SHIFT 1 +#define SMC_PMPROT_ALLS_MASK 0x8u +#define SMC_PMPROT_ALLS_SHIFT 3 +#define SMC_PMPROT_AVLP_MASK 0x20u +#define SMC_PMPROT_AVLP_SHIFT 5 +#define SMC_PMPROT_AHSRUN_MASK 0x80u +#define SMC_PMPROT_AHSRUN_SHIFT 7 +/* PMCTRL Bit Fields */ +#define SMC_PMCTRL_STOPM_MASK 0x7u +#define SMC_PMCTRL_STOPM_SHIFT 0 +#define SMC_PMCTRL_STOPM(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMCTRL_STOPM_SHIFT))&SMC_PMCTRL_STOPM_MASK) +#define SMC_PMCTRL_STOPA_MASK 0x8u +#define SMC_PMCTRL_STOPA_SHIFT 3 +#define SMC_PMCTRL_RUNM_MASK 0x60u +#define SMC_PMCTRL_RUNM_SHIFT 5 +#define SMC_PMCTRL_RUNM(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMCTRL_RUNM_SHIFT))&SMC_PMCTRL_RUNM_MASK) +/* STOPCTRL Bit Fields */ +#define SMC_STOPCTRL_LLSM_MASK 0x7u +#define SMC_STOPCTRL_LLSM_SHIFT 0 +#define SMC_STOPCTRL_LLSM(x) (((uint8_t)(((uint8_t)(x))<<SMC_STOPCTRL_LLSM_SHIFT))&SMC_STOPCTRL_LLSM_MASK) +#define SMC_STOPCTRL_PORPO_MASK 0x20u +#define SMC_STOPCTRL_PORPO_SHIFT 5 +#define SMC_STOPCTRL_PSTOPO_MASK 0xC0u +#define SMC_STOPCTRL_PSTOPO_SHIFT 6 +#define SMC_STOPCTRL_PSTOPO(x) (((uint8_t)(((uint8_t)(x))<<SMC_STOPCTRL_PSTOPO_SHIFT))&SMC_STOPCTRL_PSTOPO_MASK) +/* PMSTAT Bit Fields */ +#define SMC_PMSTAT_PMSTAT_MASK 0xFFu +#define SMC_PMSTAT_PMSTAT_SHIFT 0 +#define SMC_PMSTAT_PMSTAT(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMSTAT_PMSTAT_SHIFT))&SMC_PMSTAT_PMSTAT_MASK) + +/*! + * @} + */ /* end of group SMC_Register_Masks */ + + +/* SMC - Peripheral instance base addresses */ +/** Peripheral SMC base address */ +#define SMC_BASE (0x4007E000u) +/** Peripheral SMC base pointer */ +#define SMC ((SMC_Type *)SMC_BASE) +#define SMC_BASE_PTR (SMC) +/** Array initializer of SMC peripheral base addresses */ +#define SMC_BASE_ADDRS { SMC_BASE } +/** Array initializer of SMC peripheral base pointers */ +#define SMC_BASE_PTRS { SMC } + +/* ---------------------------------------------------------------------------- + -- SMC - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SMC_Register_Accessor_Macros SMC - Register accessor macros + * @{ + */ + + +/* SMC - Register instance definitions */ +/* SMC */ +#define SMC_PMPROT SMC_PMPROT_REG(SMC) +#define SMC_PMCTRL SMC_PMCTRL_REG(SMC) +#define SMC_STOPCTRL SMC_STOPCTRL_REG(SMC) +#define SMC_PMSTAT SMC_PMSTAT_REG(SMC) + +/*! + * @} + */ /* end of group SMC_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group SMC_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- SPI Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SPI_Peripheral_Access_Layer SPI Peripheral Access Layer + * @{ + */ + +/** SPI - Register Layout Typedef */ +typedef struct { + __IO uint32_t MCR; /**< Module Configuration Register, offset: 0x0 */ + uint8_t RESERVED_0[4]; + __IO uint32_t TCR; /**< Transfer Count Register, offset: 0x8 */ + union { /* offset: 0xC */ + __IO uint32_t CTAR[2]; /**< Clock and Transfer Attributes Register (In Master Mode), array offset: 0xC, array step: 0x4 */ + __IO uint32_t CTAR_SLAVE[1]; /**< Clock and Transfer Attributes Register (In Slave Mode), array offset: 0xC, array step: 0x4 */ + }; + uint8_t RESERVED_1[24]; + __IO uint32_t SR; /**< Status Register, offset: 0x2C */ + __IO uint32_t RSER; /**< DMA/Interrupt Request Select and Enable Register, offset: 0x30 */ + union { /* offset: 0x34 */ + __IO uint32_t PUSHR; /**< PUSH TX FIFO Register In Master Mode, offset: 0x34 */ + __IO uint32_t PUSHR_SLAVE; /**< PUSH TX FIFO Register In Slave Mode, offset: 0x34 */ + }; + __I uint32_t POPR; /**< POP RX FIFO Register, offset: 0x38 */ + __I uint32_t TXFR0; /**< Transmit FIFO Registers, offset: 0x3C */ + __I uint32_t TXFR1; /**< Transmit FIFO Registers, offset: 0x40 */ + __I uint32_t TXFR2; /**< Transmit FIFO Registers, offset: 0x44 */ + __I uint32_t TXFR3; /**< Transmit FIFO Registers, offset: 0x48 */ + uint8_t RESERVED_2[48]; + __I uint32_t RXFR0; /**< Receive FIFO Registers, offset: 0x7C */ + __I uint32_t RXFR1; /**< Receive FIFO Registers, offset: 0x80 */ + __I uint32_t RXFR2; /**< Receive FIFO Registers, offset: 0x84 */ + __I uint32_t RXFR3; /**< Receive FIFO Registers, offset: 0x88 */ +} SPI_Type, *SPI_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- SPI - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SPI_Register_Accessor_Macros SPI - Register accessor macros + * @{ + */ + + +/* SPI - Register accessors */ +#define SPI_MCR_REG(base) ((base)->MCR) +#define SPI_TCR_REG(base) ((base)->TCR) +#define SPI_CTAR_REG(base,index2) ((base)->CTAR[index2]) +#define SPI_CTAR_SLAVE_REG(base,index2) ((base)->CTAR_SLAVE[index2]) +#define SPI_SR_REG(base) ((base)->SR) +#define SPI_RSER_REG(base) ((base)->RSER) +#define SPI_PUSHR_REG(base) ((base)->PUSHR) +#define SPI_PUSHR_SLAVE_REG(base) ((base)->PUSHR_SLAVE) +#define SPI_POPR_REG(base) ((base)->POPR) +#define SPI_TXFR0_REG(base) ((base)->TXFR0) +#define SPI_TXFR1_REG(base) ((base)->TXFR1) +#define SPI_TXFR2_REG(base) ((base)->TXFR2) +#define SPI_TXFR3_REG(base) ((base)->TXFR3) +#define SPI_RXFR0_REG(base) ((base)->RXFR0) +#define SPI_RXFR1_REG(base) ((base)->RXFR1) +#define SPI_RXFR2_REG(base) ((base)->RXFR2) +#define SPI_RXFR3_REG(base) ((base)->RXFR3) + +/*! + * @} + */ /* end of group SPI_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- SPI Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SPI_Register_Masks SPI Register Masks + * @{ + */ + +/* MCR Bit Fields */ +#define SPI_MCR_HALT_MASK 0x1u +#define SPI_MCR_HALT_SHIFT 0 +#define SPI_MCR_SMPL_PT_MASK 0x300u +#define SPI_MCR_SMPL_PT_SHIFT 8 +#define SPI_MCR_SMPL_PT(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_SMPL_PT_SHIFT))&SPI_MCR_SMPL_PT_MASK) +#define SPI_MCR_CLR_RXF_MASK 0x400u +#define SPI_MCR_CLR_RXF_SHIFT 10 +#define SPI_MCR_CLR_TXF_MASK 0x800u +#define SPI_MCR_CLR_TXF_SHIFT 11 +#define SPI_MCR_DIS_RXF_MASK 0x1000u +#define SPI_MCR_DIS_RXF_SHIFT 12 +#define SPI_MCR_DIS_TXF_MASK 0x2000u +#define SPI_MCR_DIS_TXF_SHIFT 13 +#define SPI_MCR_MDIS_MASK 0x4000u +#define SPI_MCR_MDIS_SHIFT 14 +#define SPI_MCR_DOZE_MASK 0x8000u +#define SPI_MCR_DOZE_SHIFT 15 +#define SPI_MCR_PCSIS_MASK 0x3F0000u +#define SPI_MCR_PCSIS_SHIFT 16 +#define SPI_MCR_PCSIS(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_PCSIS_SHIFT))&SPI_MCR_PCSIS_MASK) +#define SPI_MCR_ROOE_MASK 0x1000000u +#define SPI_MCR_ROOE_SHIFT 24 +#define SPI_MCR_PCSSE_MASK 0x2000000u +#define SPI_MCR_PCSSE_SHIFT 25 +#define SPI_MCR_MTFE_MASK 0x4000000u +#define SPI_MCR_MTFE_SHIFT 26 +#define SPI_MCR_FRZ_MASK 0x8000000u +#define SPI_MCR_FRZ_SHIFT 27 +#define SPI_MCR_DCONF_MASK 0x30000000u +#define SPI_MCR_DCONF_SHIFT 28 +#define SPI_MCR_DCONF(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_DCONF_SHIFT))&SPI_MCR_DCONF_MASK) +#define SPI_MCR_CONT_SCKE_MASK 0x40000000u +#define SPI_MCR_CONT_SCKE_SHIFT 30 +#define SPI_MCR_MSTR_MASK 0x80000000u +#define SPI_MCR_MSTR_SHIFT 31 +/* TCR Bit Fields */ +#define SPI_TCR_SPI_TCNT_MASK 0xFFFF0000u +#define SPI_TCR_SPI_TCNT_SHIFT 16 +#define SPI_TCR_SPI_TCNT(x) (((uint32_t)(((uint32_t)(x))<<SPI_TCR_SPI_TCNT_SHIFT))&SPI_TCR_SPI_TCNT_MASK) +/* CTAR Bit Fields */ +#define SPI_CTAR_BR_MASK 0xFu +#define SPI_CTAR_BR_SHIFT 0 +#define SPI_CTAR_BR(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_BR_SHIFT))&SPI_CTAR_BR_MASK) +#define SPI_CTAR_DT_MASK 0xF0u +#define SPI_CTAR_DT_SHIFT 4 +#define SPI_CTAR_DT(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_DT_SHIFT))&SPI_CTAR_DT_MASK) +#define SPI_CTAR_ASC_MASK 0xF00u +#define SPI_CTAR_ASC_SHIFT 8 +#define SPI_CTAR_ASC(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_ASC_SHIFT))&SPI_CTAR_ASC_MASK) +#define SPI_CTAR_CSSCK_MASK 0xF000u +#define SPI_CTAR_CSSCK_SHIFT 12 +#define SPI_CTAR_CSSCK(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_CSSCK_SHIFT))&SPI_CTAR_CSSCK_MASK) +#define SPI_CTAR_PBR_MASK 0x30000u +#define SPI_CTAR_PBR_SHIFT 16 +#define SPI_CTAR_PBR(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PBR_SHIFT))&SPI_CTAR_PBR_MASK) +#define SPI_CTAR_PDT_MASK 0xC0000u +#define SPI_CTAR_PDT_SHIFT 18 +#define SPI_CTAR_PDT(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PDT_SHIFT))&SPI_CTAR_PDT_MASK) +#define SPI_CTAR_PASC_MASK 0x300000u +#define SPI_CTAR_PASC_SHIFT 20 +#define SPI_CTAR_PASC(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PASC_SHIFT))&SPI_CTAR_PASC_MASK) +#define SPI_CTAR_PCSSCK_MASK 0xC00000u +#define SPI_CTAR_PCSSCK_SHIFT 22 +#define SPI_CTAR_PCSSCK(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PCSSCK_SHIFT))&SPI_CTAR_PCSSCK_MASK) +#define SPI_CTAR_LSBFE_MASK 0x1000000u +#define SPI_CTAR_LSBFE_SHIFT 24 +#define SPI_CTAR_CPHA_MASK 0x2000000u +#define SPI_CTAR_CPHA_SHIFT 25 +#define SPI_CTAR_CPOL_MASK 0x4000000u +#define SPI_CTAR_CPOL_SHIFT 26 +#define SPI_CTAR_FMSZ_MASK 0x78000000u +#define SPI_CTAR_FMSZ_SHIFT 27 +#define SPI_CTAR_FMSZ(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_FMSZ_SHIFT))&SPI_CTAR_FMSZ_MASK) +#define SPI_CTAR_DBR_MASK 0x80000000u +#define SPI_CTAR_DBR_SHIFT 31 +/* CTAR_SLAVE Bit Fields */ +#define SPI_CTAR_SLAVE_CPHA_MASK 0x2000000u +#define SPI_CTAR_SLAVE_CPHA_SHIFT 25 +#define SPI_CTAR_SLAVE_CPOL_MASK 0x4000000u +#define SPI_CTAR_SLAVE_CPOL_SHIFT 26 +#define SPI_CTAR_SLAVE_FMSZ_MASK 0xF8000000u +#define SPI_CTAR_SLAVE_FMSZ_SHIFT 27 +#define SPI_CTAR_SLAVE_FMSZ(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_SLAVE_FMSZ_SHIFT))&SPI_CTAR_SLAVE_FMSZ_MASK) +/* SR Bit Fields */ +#define SPI_SR_POPNXTPTR_MASK 0xFu +#define SPI_SR_POPNXTPTR_SHIFT 0 +#define SPI_SR_POPNXTPTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_POPNXTPTR_SHIFT))&SPI_SR_POPNXTPTR_MASK) +#define SPI_SR_RXCTR_MASK 0xF0u +#define SPI_SR_RXCTR_SHIFT 4 +#define SPI_SR_RXCTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_RXCTR_SHIFT))&SPI_SR_RXCTR_MASK) +#define SPI_SR_TXNXTPTR_MASK 0xF00u +#define SPI_SR_TXNXTPTR_SHIFT 8 +#define SPI_SR_TXNXTPTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_TXNXTPTR_SHIFT))&SPI_SR_TXNXTPTR_MASK) +#define SPI_SR_TXCTR_MASK 0xF000u +#define SPI_SR_TXCTR_SHIFT 12 +#define SPI_SR_TXCTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_TXCTR_SHIFT))&SPI_SR_TXCTR_MASK) +#define SPI_SR_RFDF_MASK 0x20000u +#define SPI_SR_RFDF_SHIFT 17 +#define SPI_SR_RFOF_MASK 0x80000u +#define SPI_SR_RFOF_SHIFT 19 +#define SPI_SR_TFFF_MASK 0x2000000u +#define SPI_SR_TFFF_SHIFT 25 +#define SPI_SR_TFUF_MASK 0x8000000u +#define SPI_SR_TFUF_SHIFT 27 +#define SPI_SR_EOQF_MASK 0x10000000u +#define SPI_SR_EOQF_SHIFT 28 +#define SPI_SR_TXRXS_MASK 0x40000000u +#define SPI_SR_TXRXS_SHIFT 30 +#define SPI_SR_TCF_MASK 0x80000000u +#define SPI_SR_TCF_SHIFT 31 +/* RSER Bit Fields */ +#define SPI_RSER_RFDF_DIRS_MASK 0x10000u +#define SPI_RSER_RFDF_DIRS_SHIFT 16 +#define SPI_RSER_RFDF_RE_MASK 0x20000u +#define SPI_RSER_RFDF_RE_SHIFT 17 +#define SPI_RSER_RFOF_RE_MASK 0x80000u +#define SPI_RSER_RFOF_RE_SHIFT 19 +#define SPI_RSER_TFFF_DIRS_MASK 0x1000000u +#define SPI_RSER_TFFF_DIRS_SHIFT 24 +#define SPI_RSER_TFFF_RE_MASK 0x2000000u +#define SPI_RSER_TFFF_RE_SHIFT 25 +#define SPI_RSER_TFUF_RE_MASK 0x8000000u +#define SPI_RSER_TFUF_RE_SHIFT 27 +#define SPI_RSER_EOQF_RE_MASK 0x10000000u +#define SPI_RSER_EOQF_RE_SHIFT 28 +#define SPI_RSER_TCF_RE_MASK 0x80000000u +#define SPI_RSER_TCF_RE_SHIFT 31 +/* PUSHR Bit Fields */ +#define SPI_PUSHR_TXDATA_MASK 0xFFFFu +#define SPI_PUSHR_TXDATA_SHIFT 0 +#define SPI_PUSHR_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_TXDATA_SHIFT))&SPI_PUSHR_TXDATA_MASK) +#define SPI_PUSHR_PCS_MASK 0x3F0000u +#define SPI_PUSHR_PCS_SHIFT 16 +#define SPI_PUSHR_PCS(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_PCS_SHIFT))&SPI_PUSHR_PCS_MASK) +#define SPI_PUSHR_CTCNT_MASK 0x4000000u +#define SPI_PUSHR_CTCNT_SHIFT 26 +#define SPI_PUSHR_EOQ_MASK 0x8000000u +#define SPI_PUSHR_EOQ_SHIFT 27 +#define SPI_PUSHR_CTAS_MASK 0x70000000u +#define SPI_PUSHR_CTAS_SHIFT 28 +#define SPI_PUSHR_CTAS(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_CTAS_SHIFT))&SPI_PUSHR_CTAS_MASK) +#define SPI_PUSHR_CONT_MASK 0x80000000u +#define SPI_PUSHR_CONT_SHIFT 31 +/* PUSHR_SLAVE Bit Fields */ +#define SPI_PUSHR_SLAVE_TXDATA_MASK 0xFFFFFFFFu +#define SPI_PUSHR_SLAVE_TXDATA_SHIFT 0 +#define SPI_PUSHR_SLAVE_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_SLAVE_TXDATA_SHIFT))&SPI_PUSHR_SLAVE_TXDATA_MASK) +/* POPR Bit Fields */ +#define SPI_POPR_RXDATA_MASK 0xFFFFFFFFu +#define SPI_POPR_RXDATA_SHIFT 0 +#define SPI_POPR_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_POPR_RXDATA_SHIFT))&SPI_POPR_RXDATA_MASK) +/* TXFR0 Bit Fields */ +#define SPI_TXFR0_TXDATA_MASK 0xFFFFu +#define SPI_TXFR0_TXDATA_SHIFT 0 +#define SPI_TXFR0_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR0_TXDATA_SHIFT))&SPI_TXFR0_TXDATA_MASK) +#define SPI_TXFR0_TXCMD_TXDATA_MASK 0xFFFF0000u +#define SPI_TXFR0_TXCMD_TXDATA_SHIFT 16 +#define SPI_TXFR0_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR0_TXCMD_TXDATA_SHIFT))&SPI_TXFR0_TXCMD_TXDATA_MASK) +/* TXFR1 Bit Fields */ +#define SPI_TXFR1_TXDATA_MASK 0xFFFFu +#define SPI_TXFR1_TXDATA_SHIFT 0 +#define SPI_TXFR1_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR1_TXDATA_SHIFT))&SPI_TXFR1_TXDATA_MASK) +#define SPI_TXFR1_TXCMD_TXDATA_MASK 0xFFFF0000u +#define SPI_TXFR1_TXCMD_TXDATA_SHIFT 16 +#define SPI_TXFR1_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR1_TXCMD_TXDATA_SHIFT))&SPI_TXFR1_TXCMD_TXDATA_MASK) +/* TXFR2 Bit Fields */ +#define SPI_TXFR2_TXDATA_MASK 0xFFFFu +#define SPI_TXFR2_TXDATA_SHIFT 0 +#define SPI_TXFR2_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR2_TXDATA_SHIFT))&SPI_TXFR2_TXDATA_MASK) +#define SPI_TXFR2_TXCMD_TXDATA_MASK 0xFFFF0000u +#define SPI_TXFR2_TXCMD_TXDATA_SHIFT 16 +#define SPI_TXFR2_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR2_TXCMD_TXDATA_SHIFT))&SPI_TXFR2_TXCMD_TXDATA_MASK) +/* TXFR3 Bit Fields */ +#define SPI_TXFR3_TXDATA_MASK 0xFFFFu +#define SPI_TXFR3_TXDATA_SHIFT 0 +#define SPI_TXFR3_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR3_TXDATA_SHIFT))&SPI_TXFR3_TXDATA_MASK) +#define SPI_TXFR3_TXCMD_TXDATA_MASK 0xFFFF0000u +#define SPI_TXFR3_TXCMD_TXDATA_SHIFT 16 +#define SPI_TXFR3_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR3_TXCMD_TXDATA_SHIFT))&SPI_TXFR3_TXCMD_TXDATA_MASK) +/* RXFR0 Bit Fields */ +#define SPI_RXFR0_RXDATA_MASK 0xFFFFFFFFu +#define SPI_RXFR0_RXDATA_SHIFT 0 +#define SPI_RXFR0_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR0_RXDATA_SHIFT))&SPI_RXFR0_RXDATA_MASK) +/* RXFR1 Bit Fields */ +#define SPI_RXFR1_RXDATA_MASK 0xFFFFFFFFu +#define SPI_RXFR1_RXDATA_SHIFT 0 +#define SPI_RXFR1_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR1_RXDATA_SHIFT))&SPI_RXFR1_RXDATA_MASK) +/* RXFR2 Bit Fields */ +#define SPI_RXFR2_RXDATA_MASK 0xFFFFFFFFu +#define SPI_RXFR2_RXDATA_SHIFT 0 +#define SPI_RXFR2_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR2_RXDATA_SHIFT))&SPI_RXFR2_RXDATA_MASK) +/* RXFR3 Bit Fields */ +#define SPI_RXFR3_RXDATA_MASK 0xFFFFFFFFu +#define SPI_RXFR3_RXDATA_SHIFT 0 +#define SPI_RXFR3_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR3_RXDATA_SHIFT))&SPI_RXFR3_RXDATA_MASK) + +/*! + * @} + */ /* end of group SPI_Register_Masks */ + + +/* SPI - Peripheral instance base addresses */ +/** Peripheral SPI0 base address */ +#define SPI0_BASE (0x4002C000u) +/** Peripheral SPI0 base pointer */ +#define SPI0 ((SPI_Type *)SPI0_BASE) +#define SPI0_BASE_PTR (SPI0) +/** Peripheral SPI1 base address */ +#define SPI1_BASE (0x4002D000u) +/** Peripheral SPI1 base pointer */ +#define SPI1 ((SPI_Type *)SPI1_BASE) +#define SPI1_BASE_PTR (SPI1) +/** Array initializer of SPI peripheral base addresses */ +#define SPI_BASE_ADDRS { SPI0_BASE, SPI1_BASE } +/** Array initializer of SPI peripheral base pointers */ +#define SPI_BASE_PTRS { SPI0, SPI1 } +/** Interrupt vectors for the SPI peripheral type */ +#define SPI_IRQS { SPI0_IRQn, SPI1_IRQn } + +/* ---------------------------------------------------------------------------- + -- SPI - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup SPI_Register_Accessor_Macros SPI - Register accessor macros + * @{ + */ + + +/* SPI - Register instance definitions */ +/* SPI0 */ +#define SPI0_MCR SPI_MCR_REG(SPI0) +#define SPI0_TCR SPI_TCR_REG(SPI0) +#define SPI0_CTAR0 SPI_CTAR_REG(SPI0,0) +#define SPI0_CTAR0_SLAVE SPI_CTAR_SLAVE_REG(SPI0,0) +#define SPI0_CTAR1 SPI_CTAR_REG(SPI0,1) +#define SPI0_SR SPI_SR_REG(SPI0) +#define SPI0_RSER SPI_RSER_REG(SPI0) +#define SPI0_PUSHR SPI_PUSHR_REG(SPI0) +#define SPI0_PUSHR_SLAVE SPI_PUSHR_SLAVE_REG(SPI0) +#define SPI0_POPR SPI_POPR_REG(SPI0) +#define SPI0_TXFR0 SPI_TXFR0_REG(SPI0) +#define SPI0_TXFR1 SPI_TXFR1_REG(SPI0) +#define SPI0_TXFR2 SPI_TXFR2_REG(SPI0) +#define SPI0_TXFR3 SPI_TXFR3_REG(SPI0) +#define SPI0_RXFR0 SPI_RXFR0_REG(SPI0) +#define SPI0_RXFR1 SPI_RXFR1_REG(SPI0) +#define SPI0_RXFR2 SPI_RXFR2_REG(SPI0) +#define SPI0_RXFR3 SPI_RXFR3_REG(SPI0) +/* SPI1 */ +#define SPI1_MCR SPI_MCR_REG(SPI1) +#define SPI1_TCR SPI_TCR_REG(SPI1) +#define SPI1_CTAR0 SPI_CTAR_REG(SPI1,0) +#define SPI1_CTAR0_SLAVE SPI_CTAR_SLAVE_REG(SPI1,0) +#define SPI1_CTAR1 SPI_CTAR_REG(SPI1,1) +#define SPI1_SR SPI_SR_REG(SPI1) +#define SPI1_RSER SPI_RSER_REG(SPI1) +#define SPI1_PUSHR SPI_PUSHR_REG(SPI1) +#define SPI1_PUSHR_SLAVE SPI_PUSHR_SLAVE_REG(SPI1) +#define SPI1_POPR SPI_POPR_REG(SPI1) +#define SPI1_TXFR0 SPI_TXFR0_REG(SPI1) +#define SPI1_TXFR1 SPI_TXFR1_REG(SPI1) +#define SPI1_TXFR2 SPI_TXFR2_REG(SPI1) +#define SPI1_TXFR3 SPI_TXFR3_REG(SPI1) +#define SPI1_RXFR0 SPI_RXFR0_REG(SPI1) +#define SPI1_RXFR1 SPI_RXFR1_REG(SPI1) +#define SPI1_RXFR2 SPI_RXFR2_REG(SPI1) +#define SPI1_RXFR3 SPI_RXFR3_REG(SPI1) + +/* SPI - Register array accessors */ +#define SPI0_CTAR(index2) SPI_CTAR_REG(SPI0,index2) +#define SPI1_CTAR(index2) SPI_CTAR_REG(SPI1,index2) +#define SPI0_CTAR_SLAVE(index2) SPI_CTAR_SLAVE_REG(SPI0,index2) +#define SPI1_CTAR_SLAVE(index2) SPI_CTAR_SLAVE_REG(SPI1,index2) + +/*! + * @} + */ /* end of group SPI_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group SPI_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- UART Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup UART_Peripheral_Access_Layer UART Peripheral Access Layer + * @{ + */ + +/** UART - Register Layout Typedef */ +typedef struct { + __IO uint8_t BDH; /**< UART Baud Rate Registers: High, offset: 0x0 */ + __IO uint8_t BDL; /**< UART Baud Rate Registers: Low, offset: 0x1 */ + __IO uint8_t C1; /**< UART Control Register 1, offset: 0x2 */ + __IO uint8_t C2; /**< UART Control Register 2, offset: 0x3 */ + __I uint8_t S1; /**< UART Status Register 1, offset: 0x4 */ + __IO uint8_t S2; /**< UART Status Register 2, offset: 0x5 */ + __IO uint8_t C3; /**< UART Control Register 3, offset: 0x6 */ + __IO uint8_t D; /**< UART Data Register, offset: 0x7 */ + __IO uint8_t MA1; /**< UART Match Address Registers 1, offset: 0x8 */ + __IO uint8_t MA2; /**< UART Match Address Registers 2, offset: 0x9 */ + __IO uint8_t C4; /**< UART Control Register 4, offset: 0xA */ + __IO uint8_t C5; /**< UART Control Register 5, offset: 0xB */ + __I uint8_t ED; /**< UART Extended Data Register, offset: 0xC */ + __IO uint8_t MODEM; /**< UART Modem Register, offset: 0xD */ + __IO uint8_t IR; /**< UART Infrared Register, offset: 0xE */ + uint8_t RESERVED_0[1]; + __IO uint8_t PFIFO; /**< UART FIFO Parameters, offset: 0x10 */ + __IO uint8_t CFIFO; /**< UART FIFO Control Register, offset: 0x11 */ + __IO uint8_t SFIFO; /**< UART FIFO Status Register, offset: 0x12 */ + __IO uint8_t TWFIFO; /**< UART FIFO Transmit Watermark, offset: 0x13 */ + __I uint8_t TCFIFO; /**< UART FIFO Transmit Count, offset: 0x14 */ + __IO uint8_t RWFIFO; /**< UART FIFO Receive Watermark, offset: 0x15 */ + __I uint8_t RCFIFO; /**< UART FIFO Receive Count, offset: 0x16 */ + uint8_t RESERVED_1[1]; + __IO uint8_t C7816; /**< UART 7816 Control Register, offset: 0x18 */ + __IO uint8_t IE7816; /**< UART 7816 Interrupt Enable Register, offset: 0x19 */ + __IO uint8_t IS7816; /**< UART 7816 Interrupt Status Register, offset: 0x1A */ + __IO uint8_t WP7816; /**< UART 7816 Wait Parameter Register, offset: 0x1B */ + __IO uint8_t WN7816; /**< UART 7816 Wait N Register, offset: 0x1C */ + __IO uint8_t WF7816; /**< UART 7816 Wait FD Register, offset: 0x1D */ + __IO uint8_t ET7816; /**< UART 7816 Error Threshold Register, offset: 0x1E */ + __IO uint8_t TL7816; /**< UART 7816 Transmit Length Register, offset: 0x1F */ + uint8_t RESERVED_2[26]; + __IO uint8_t AP7816A_T0; /**< UART 7816 ATR Duration Timer Register A, offset: 0x3A */ + __IO uint8_t AP7816B_T0; /**< UART 7816 ATR Duration Timer Register B, offset: 0x3B */ + union { /* offset: 0x3C */ + struct { /* offset: 0x3C */ + __IO uint8_t WP7816A_T0; /**< UART 7816 Wait Parameter Register A, offset: 0x3C */ + __IO uint8_t WP7816B_T0; /**< UART 7816 Wait Parameter Register B, offset: 0x3D */ + } TYPE0; + struct { /* offset: 0x3C */ + __IO uint8_t WP7816A_T1; /**< UART 7816 Wait Parameter Register A, offset: 0x3C */ + __IO uint8_t WP7816B_T1; /**< UART 7816 Wait Parameter Register B, offset: 0x3D */ + } TYPE1; + }; + __IO uint8_t WGP7816_T1; /**< UART 7816 Wait and Guard Parameter Register, offset: 0x3E */ + __IO uint8_t WP7816C_T1; /**< UART 7816 Wait Parameter Register C, offset: 0x3F */ +} UART_Type, *UART_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- UART - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup UART_Register_Accessor_Macros UART - Register accessor macros + * @{ + */ + + +/* UART - Register accessors */ +#define UART_BDH_REG(base) ((base)->BDH) +#define UART_BDL_REG(base) ((base)->BDL) +#define UART_C1_REG(base) ((base)->C1) +#define UART_C2_REG(base) ((base)->C2) +#define UART_S1_REG(base) ((base)->S1) +#define UART_S2_REG(base) ((base)->S2) +#define UART_C3_REG(base) ((base)->C3) +#define UART_D_REG(base) ((base)->D) +#define UART_MA1_REG(base) ((base)->MA1) +#define UART_MA2_REG(base) ((base)->MA2) +#define UART_C4_REG(base) ((base)->C4) +#define UART_C5_REG(base) ((base)->C5) +#define UART_ED_REG(base) ((base)->ED) +#define UART_MODEM_REG(base) ((base)->MODEM) +#define UART_IR_REG(base) ((base)->IR) +#define UART_PFIFO_REG(base) ((base)->PFIFO) +#define UART_CFIFO_REG(base) ((base)->CFIFO) +#define UART_SFIFO_REG(base) ((base)->SFIFO) +#define UART_TWFIFO_REG(base) ((base)->TWFIFO) +#define UART_TCFIFO_REG(base) ((base)->TCFIFO) +#define UART_RWFIFO_REG(base) ((base)->RWFIFO) +#define UART_RCFIFO_REG(base) ((base)->RCFIFO) +#define UART_C7816_REG(base) ((base)->C7816) +#define UART_IE7816_REG(base) ((base)->IE7816) +#define UART_IS7816_REG(base) ((base)->IS7816) +#define UART_WP7816_REG(base) ((base)->WP7816) +#define UART_WN7816_REG(base) ((base)->WN7816) +#define UART_WF7816_REG(base) ((base)->WF7816) +#define UART_ET7816_REG(base) ((base)->ET7816) +#define UART_TL7816_REG(base) ((base)->TL7816) +#define UART_AP7816A_T0_REG(base) ((base)->AP7816A_T0) +#define UART_AP7816B_T0_REG(base) ((base)->AP7816B_T0) +#define UART_WP7816A_T0_REG(base) ((base)->TYPE0.WP7816A_T0) +#define UART_WP7816B_T0_REG(base) ((base)->TYPE0.WP7816B_T0) +#define UART_WP7816A_T1_REG(base) ((base)->TYPE1.WP7816A_T1) +#define UART_WP7816B_T1_REG(base) ((base)->TYPE1.WP7816B_T1) +#define UART_WGP7816_T1_REG(base) ((base)->WGP7816_T1) +#define UART_WP7816C_T1_REG(base) ((base)->WP7816C_T1) + +/*! + * @} + */ /* end of group UART_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- UART Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup UART_Register_Masks UART Register Masks + * @{ + */ + +/* BDH Bit Fields */ +#define UART_BDH_SBR_MASK 0x1Fu +#define UART_BDH_SBR_SHIFT 0 +#define UART_BDH_SBR(x) (((uint8_t)(((uint8_t)(x))<<UART_BDH_SBR_SHIFT))&UART_BDH_SBR_MASK) +#define UART_BDH_RXEDGIE_MASK 0x40u +#define UART_BDH_RXEDGIE_SHIFT 6 +#define UART_BDH_LBKDIE_MASK 0x80u +#define UART_BDH_LBKDIE_SHIFT 7 +/* BDL Bit Fields */ +#define UART_BDL_SBR_MASK 0xFFu +#define UART_BDL_SBR_SHIFT 0 +#define UART_BDL_SBR(x) (((uint8_t)(((uint8_t)(x))<<UART_BDL_SBR_SHIFT))&UART_BDL_SBR_MASK) +/* C1 Bit Fields */ +#define UART_C1_PT_MASK 0x1u +#define UART_C1_PT_SHIFT 0 +#define UART_C1_PE_MASK 0x2u +#define UART_C1_PE_SHIFT 1 +#define UART_C1_ILT_MASK 0x4u +#define UART_C1_ILT_SHIFT 2 +#define UART_C1_WAKE_MASK 0x8u +#define UART_C1_WAKE_SHIFT 3 +#define UART_C1_M_MASK 0x10u +#define UART_C1_M_SHIFT 4 +#define UART_C1_RSRC_MASK 0x20u +#define UART_C1_RSRC_SHIFT 5 +#define UART_C1_UARTSWAI_MASK 0x40u +#define UART_C1_UARTSWAI_SHIFT 6 +#define UART_C1_LOOPS_MASK 0x80u +#define UART_C1_LOOPS_SHIFT 7 +/* C2 Bit Fields */ +#define UART_C2_SBK_MASK 0x1u +#define UART_C2_SBK_SHIFT 0 +#define UART_C2_RWU_MASK 0x2u +#define UART_C2_RWU_SHIFT 1 +#define UART_C2_RE_MASK 0x4u +#define UART_C2_RE_SHIFT 2 +#define UART_C2_TE_MASK 0x8u +#define UART_C2_TE_SHIFT 3 +#define UART_C2_ILIE_MASK 0x10u +#define UART_C2_ILIE_SHIFT 4 +#define UART_C2_RIE_MASK 0x20u +#define UART_C2_RIE_SHIFT 5 +#define UART_C2_TCIE_MASK 0x40u +#define UART_C2_TCIE_SHIFT 6 +#define UART_C2_TIE_MASK 0x80u +#define UART_C2_TIE_SHIFT 7 +/* S1 Bit Fields */ +#define UART_S1_PF_MASK 0x1u +#define UART_S1_PF_SHIFT 0 +#define UART_S1_FE_MASK 0x2u +#define UART_S1_FE_SHIFT 1 +#define UART_S1_NF_MASK 0x4u +#define UART_S1_NF_SHIFT 2 +#define UART_S1_OR_MASK 0x8u +#define UART_S1_OR_SHIFT 3 +#define UART_S1_IDLE_MASK 0x10u +#define UART_S1_IDLE_SHIFT 4 +#define UART_S1_RDRF_MASK 0x20u +#define UART_S1_RDRF_SHIFT 5 +#define UART_S1_TC_MASK 0x40u +#define UART_S1_TC_SHIFT 6 +#define UART_S1_TDRE_MASK 0x80u +#define UART_S1_TDRE_SHIFT 7 +/* S2 Bit Fields */ +#define UART_S2_RAF_MASK 0x1u +#define UART_S2_RAF_SHIFT 0 +#define UART_S2_LBKDE_MASK 0x2u +#define UART_S2_LBKDE_SHIFT 1 +#define UART_S2_BRK13_MASK 0x4u +#define UART_S2_BRK13_SHIFT 2 +#define UART_S2_RWUID_MASK 0x8u +#define UART_S2_RWUID_SHIFT 3 +#define UART_S2_RXINV_MASK 0x10u +#define UART_S2_RXINV_SHIFT 4 +#define UART_S2_MSBF_MASK 0x20u +#define UART_S2_MSBF_SHIFT 5 +#define UART_S2_RXEDGIF_MASK 0x40u +#define UART_S2_RXEDGIF_SHIFT 6 +#define UART_S2_LBKDIF_MASK 0x80u +#define UART_S2_LBKDIF_SHIFT 7 +/* C3 Bit Fields */ +#define UART_C3_PEIE_MASK 0x1u +#define UART_C3_PEIE_SHIFT 0 +#define UART_C3_FEIE_MASK 0x2u +#define UART_C3_FEIE_SHIFT 1 +#define UART_C3_NEIE_MASK 0x4u +#define UART_C3_NEIE_SHIFT 2 +#define UART_C3_ORIE_MASK 0x8u +#define UART_C3_ORIE_SHIFT 3 +#define UART_C3_TXINV_MASK 0x10u +#define UART_C3_TXINV_SHIFT 4 +#define UART_C3_TXDIR_MASK 0x20u +#define UART_C3_TXDIR_SHIFT 5 +#define UART_C3_T8_MASK 0x40u +#define UART_C3_T8_SHIFT 6 +#define UART_C3_R8_MASK 0x80u +#define UART_C3_R8_SHIFT 7 +/* D Bit Fields */ +#define UART_D_RT_MASK 0xFFu +#define UART_D_RT_SHIFT 0 +#define UART_D_RT(x) (((uint8_t)(((uint8_t)(x))<<UART_D_RT_SHIFT))&UART_D_RT_MASK) +/* MA1 Bit Fields */ +#define UART_MA1_MA_MASK 0xFFu +#define UART_MA1_MA_SHIFT 0 +#define UART_MA1_MA(x) (((uint8_t)(((uint8_t)(x))<<UART_MA1_MA_SHIFT))&UART_MA1_MA_MASK) +/* MA2 Bit Fields */ +#define UART_MA2_MA_MASK 0xFFu +#define UART_MA2_MA_SHIFT 0 +#define UART_MA2_MA(x) (((uint8_t)(((uint8_t)(x))<<UART_MA2_MA_SHIFT))&UART_MA2_MA_MASK) +/* C4 Bit Fields */ +#define UART_C4_BRFA_MASK 0x1Fu +#define UART_C4_BRFA_SHIFT 0 +#define UART_C4_BRFA(x) (((uint8_t)(((uint8_t)(x))<<UART_C4_BRFA_SHIFT))&UART_C4_BRFA_MASK) +#define UART_C4_M10_MASK 0x20u +#define UART_C4_M10_SHIFT 5 +#define UART_C4_MAEN2_MASK 0x40u +#define UART_C4_MAEN2_SHIFT 6 +#define UART_C4_MAEN1_MASK 0x80u +#define UART_C4_MAEN1_SHIFT 7 +/* C5 Bit Fields */ +#define UART_C5_RDMAS_MASK 0x20u +#define UART_C5_RDMAS_SHIFT 5 +#define UART_C5_TDMAS_MASK 0x80u +#define UART_C5_TDMAS_SHIFT 7 +/* ED Bit Fields */ +#define UART_ED_PARITYE_MASK 0x40u +#define UART_ED_PARITYE_SHIFT 6 +#define UART_ED_NOISY_MASK 0x80u +#define UART_ED_NOISY_SHIFT 7 +/* MODEM Bit Fields */ +#define UART_MODEM_TXCTSE_MASK 0x1u +#define UART_MODEM_TXCTSE_SHIFT 0 +#define UART_MODEM_TXRTSE_MASK 0x2u +#define UART_MODEM_TXRTSE_SHIFT 1 +#define UART_MODEM_TXRTSPOL_MASK 0x4u +#define UART_MODEM_TXRTSPOL_SHIFT 2 +#define UART_MODEM_RXRTSE_MASK 0x8u +#define UART_MODEM_RXRTSE_SHIFT 3 +/* IR Bit Fields */ +#define UART_IR_TNP_MASK 0x3u +#define UART_IR_TNP_SHIFT 0 +#define UART_IR_TNP(x) (((uint8_t)(((uint8_t)(x))<<UART_IR_TNP_SHIFT))&UART_IR_TNP_MASK) +#define UART_IR_IREN_MASK 0x4u +#define UART_IR_IREN_SHIFT 2 +/* PFIFO Bit Fields */ +#define UART_PFIFO_RXFIFOSIZE_MASK 0x7u +#define UART_PFIFO_RXFIFOSIZE_SHIFT 0 +#define UART_PFIFO_RXFIFOSIZE(x) (((uint8_t)(((uint8_t)(x))<<UART_PFIFO_RXFIFOSIZE_SHIFT))&UART_PFIFO_RXFIFOSIZE_MASK) +#define UART_PFIFO_RXFE_MASK 0x8u +#define UART_PFIFO_RXFE_SHIFT 3 +#define UART_PFIFO_TXFIFOSIZE_MASK 0x70u +#define UART_PFIFO_TXFIFOSIZE_SHIFT 4 +#define UART_PFIFO_TXFIFOSIZE(x) (((uint8_t)(((uint8_t)(x))<<UART_PFIFO_TXFIFOSIZE_SHIFT))&UART_PFIFO_TXFIFOSIZE_MASK) +#define UART_PFIFO_TXFE_MASK 0x80u +#define UART_PFIFO_TXFE_SHIFT 7 +/* CFIFO Bit Fields */ +#define UART_CFIFO_RXUFE_MASK 0x1u +#define UART_CFIFO_RXUFE_SHIFT 0 +#define UART_CFIFO_TXOFE_MASK 0x2u +#define UART_CFIFO_TXOFE_SHIFT 1 +#define UART_CFIFO_RXOFE_MASK 0x4u +#define UART_CFIFO_RXOFE_SHIFT 2 +#define UART_CFIFO_RXFLUSH_MASK 0x40u +#define UART_CFIFO_RXFLUSH_SHIFT 6 +#define UART_CFIFO_TXFLUSH_MASK 0x80u +#define UART_CFIFO_TXFLUSH_SHIFT 7 +/* SFIFO Bit Fields */ +#define UART_SFIFO_RXUF_MASK 0x1u +#define UART_SFIFO_RXUF_SHIFT 0 +#define UART_SFIFO_TXOF_MASK 0x2u +#define UART_SFIFO_TXOF_SHIFT 1 +#define UART_SFIFO_RXOF_MASK 0x4u +#define UART_SFIFO_RXOF_SHIFT 2 +#define UART_SFIFO_RXEMPT_MASK 0x40u +#define UART_SFIFO_RXEMPT_SHIFT 6 +#define UART_SFIFO_TXEMPT_MASK 0x80u +#define UART_SFIFO_TXEMPT_SHIFT 7 +/* TWFIFO Bit Fields */ +#define UART_TWFIFO_TXWATER_MASK 0xFFu +#define UART_TWFIFO_TXWATER_SHIFT 0 +#define UART_TWFIFO_TXWATER(x) (((uint8_t)(((uint8_t)(x))<<UART_TWFIFO_TXWATER_SHIFT))&UART_TWFIFO_TXWATER_MASK) +/* TCFIFO Bit Fields */ +#define UART_TCFIFO_TXCOUNT_MASK 0xFFu +#define UART_TCFIFO_TXCOUNT_SHIFT 0 +#define UART_TCFIFO_TXCOUNT(x) (((uint8_t)(((uint8_t)(x))<<UART_TCFIFO_TXCOUNT_SHIFT))&UART_TCFIFO_TXCOUNT_MASK) +/* RWFIFO Bit Fields */ +#define UART_RWFIFO_RXWATER_MASK 0xFFu +#define UART_RWFIFO_RXWATER_SHIFT 0 +#define UART_RWFIFO_RXWATER(x) (((uint8_t)(((uint8_t)(x))<<UART_RWFIFO_RXWATER_SHIFT))&UART_RWFIFO_RXWATER_MASK) +/* RCFIFO Bit Fields */ +#define UART_RCFIFO_RXCOUNT_MASK 0xFFu +#define UART_RCFIFO_RXCOUNT_SHIFT 0 +#define UART_RCFIFO_RXCOUNT(x) (((uint8_t)(((uint8_t)(x))<<UART_RCFIFO_RXCOUNT_SHIFT))&UART_RCFIFO_RXCOUNT_MASK) +/* C7816 Bit Fields */ +#define UART_C7816_ISO_7816E_MASK 0x1u +#define UART_C7816_ISO_7816E_SHIFT 0 +#define UART_C7816_TTYPE_MASK 0x2u +#define UART_C7816_TTYPE_SHIFT 1 +#define UART_C7816_INIT_MASK 0x4u +#define UART_C7816_INIT_SHIFT 2 +#define UART_C7816_ANACK_MASK 0x8u +#define UART_C7816_ANACK_SHIFT 3 +#define UART_C7816_ONACK_MASK 0x10u +#define UART_C7816_ONACK_SHIFT 4 +/* IE7816 Bit Fields */ +#define UART_IE7816_RXTE_MASK 0x1u +#define UART_IE7816_RXTE_SHIFT 0 +#define UART_IE7816_TXTE_MASK 0x2u +#define UART_IE7816_TXTE_SHIFT 1 +#define UART_IE7816_GTVE_MASK 0x4u +#define UART_IE7816_GTVE_SHIFT 2 +#define UART_IE7816_ADTE_MASK 0x8u +#define UART_IE7816_ADTE_SHIFT 3 +#define UART_IE7816_INITDE_MASK 0x10u +#define UART_IE7816_INITDE_SHIFT 4 +#define UART_IE7816_BWTE_MASK 0x20u +#define UART_IE7816_BWTE_SHIFT 5 +#define UART_IE7816_CWTE_MASK 0x40u +#define UART_IE7816_CWTE_SHIFT 6 +#define UART_IE7816_WTE_MASK 0x80u +#define UART_IE7816_WTE_SHIFT 7 +/* IS7816 Bit Fields */ +#define UART_IS7816_RXT_MASK 0x1u +#define UART_IS7816_RXT_SHIFT 0 +#define UART_IS7816_TXT_MASK 0x2u +#define UART_IS7816_TXT_SHIFT 1 +#define UART_IS7816_GTV_MASK 0x4u +#define UART_IS7816_GTV_SHIFT 2 +#define UART_IS7816_ADT_MASK 0x8u +#define UART_IS7816_ADT_SHIFT 3 +#define UART_IS7816_INITD_MASK 0x10u +#define UART_IS7816_INITD_SHIFT 4 +#define UART_IS7816_BWT_MASK 0x20u +#define UART_IS7816_BWT_SHIFT 5 +#define UART_IS7816_CWT_MASK 0x40u +#define UART_IS7816_CWT_SHIFT 6 +#define UART_IS7816_WT_MASK 0x80u +#define UART_IS7816_WT_SHIFT 7 +/* WP7816 Bit Fields */ +#define UART_WP7816_WTX_MASK 0xFFu +#define UART_WP7816_WTX_SHIFT 0 +#define UART_WP7816_WTX(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816_WTX_SHIFT))&UART_WP7816_WTX_MASK) +/* WN7816 Bit Fields */ +#define UART_WN7816_GTN_MASK 0xFFu +#define UART_WN7816_GTN_SHIFT 0 +#define UART_WN7816_GTN(x) (((uint8_t)(((uint8_t)(x))<<UART_WN7816_GTN_SHIFT))&UART_WN7816_GTN_MASK) +/* WF7816 Bit Fields */ +#define UART_WF7816_GTFD_MASK 0xFFu +#define UART_WF7816_GTFD_SHIFT 0 +#define UART_WF7816_GTFD(x) (((uint8_t)(((uint8_t)(x))<<UART_WF7816_GTFD_SHIFT))&UART_WF7816_GTFD_MASK) +/* ET7816 Bit Fields */ +#define UART_ET7816_RXTHRESHOLD_MASK 0xFu +#define UART_ET7816_RXTHRESHOLD_SHIFT 0 +#define UART_ET7816_RXTHRESHOLD(x) (((uint8_t)(((uint8_t)(x))<<UART_ET7816_RXTHRESHOLD_SHIFT))&UART_ET7816_RXTHRESHOLD_MASK) +#define UART_ET7816_TXTHRESHOLD_MASK 0xF0u +#define UART_ET7816_TXTHRESHOLD_SHIFT 4 +#define UART_ET7816_TXTHRESHOLD(x) (((uint8_t)(((uint8_t)(x))<<UART_ET7816_TXTHRESHOLD_SHIFT))&UART_ET7816_TXTHRESHOLD_MASK) +/* TL7816 Bit Fields */ +#define UART_TL7816_TLEN_MASK 0xFFu +#define UART_TL7816_TLEN_SHIFT 0 +#define UART_TL7816_TLEN(x) (((uint8_t)(((uint8_t)(x))<<UART_TL7816_TLEN_SHIFT))&UART_TL7816_TLEN_MASK) +/* AP7816A_T0 Bit Fields */ +#define UART_AP7816A_T0_ADTI_H_MASK 0xFFu +#define UART_AP7816A_T0_ADTI_H_SHIFT 0 +#define UART_AP7816A_T0_ADTI_H(x) (((uint8_t)(((uint8_t)(x))<<UART_AP7816A_T0_ADTI_H_SHIFT))&UART_AP7816A_T0_ADTI_H_MASK) +/* AP7816B_T0 Bit Fields */ +#define UART_AP7816B_T0_ADTI_L_MASK 0xFFu +#define UART_AP7816B_T0_ADTI_L_SHIFT 0 +#define UART_AP7816B_T0_ADTI_L(x) (((uint8_t)(((uint8_t)(x))<<UART_AP7816B_T0_ADTI_L_SHIFT))&UART_AP7816B_T0_ADTI_L_MASK) +/* WP7816A_T0 Bit Fields */ +#define UART_WP7816A_T0_WI_H_MASK 0xFFu +#define UART_WP7816A_T0_WI_H_SHIFT 0 +#define UART_WP7816A_T0_WI_H(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816A_T0_WI_H_SHIFT))&UART_WP7816A_T0_WI_H_MASK) +/* WP7816B_T0 Bit Fields */ +#define UART_WP7816B_T0_WI_L_MASK 0xFFu +#define UART_WP7816B_T0_WI_L_SHIFT 0 +#define UART_WP7816B_T0_WI_L(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816B_T0_WI_L_SHIFT))&UART_WP7816B_T0_WI_L_MASK) +/* WP7816A_T1 Bit Fields */ +#define UART_WP7816A_T1_BWI_H_MASK 0xFFu +#define UART_WP7816A_T1_BWI_H_SHIFT 0 +#define UART_WP7816A_T1_BWI_H(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816A_T1_BWI_H_SHIFT))&UART_WP7816A_T1_BWI_H_MASK) +/* WP7816B_T1 Bit Fields */ +#define UART_WP7816B_T1_BWI_L_MASK 0xFFu +#define UART_WP7816B_T1_BWI_L_SHIFT 0 +#define UART_WP7816B_T1_BWI_L(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816B_T1_BWI_L_SHIFT))&UART_WP7816B_T1_BWI_L_MASK) +/* WGP7816_T1 Bit Fields */ +#define UART_WGP7816_T1_BGI_MASK 0xFu +#define UART_WGP7816_T1_BGI_SHIFT 0 +#define UART_WGP7816_T1_BGI(x) (((uint8_t)(((uint8_t)(x))<<UART_WGP7816_T1_BGI_SHIFT))&UART_WGP7816_T1_BGI_MASK) +#define UART_WGP7816_T1_CWI1_MASK 0xF0u +#define UART_WGP7816_T1_CWI1_SHIFT 4 +#define UART_WGP7816_T1_CWI1(x) (((uint8_t)(((uint8_t)(x))<<UART_WGP7816_T1_CWI1_SHIFT))&UART_WGP7816_T1_CWI1_MASK) +/* WP7816C_T1 Bit Fields */ +#define UART_WP7816C_T1_CWI2_MASK 0x1Fu +#define UART_WP7816C_T1_CWI2_SHIFT 0 +#define UART_WP7816C_T1_CWI2(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816C_T1_CWI2_SHIFT))&UART_WP7816C_T1_CWI2_MASK) + +/*! + * @} + */ /* end of group UART_Register_Masks */ + + +/* UART - Peripheral instance base addresses */ +/** Peripheral UART0 base address */ +#define UART0_BASE (0x4006A000u) +/** Peripheral UART0 base pointer */ +#define UART0 ((UART_Type *)UART0_BASE) +#define UART0_BASE_PTR (UART0) +/** Peripheral UART1 base address */ +#define UART1_BASE (0x4006B000u) +/** Peripheral UART1 base pointer */ +#define UART1 ((UART_Type *)UART1_BASE) +#define UART1_BASE_PTR (UART1) +/** Peripheral UART2 base address */ +#define UART2_BASE (0x4006C000u) +/** Peripheral UART2 base pointer */ +#define UART2 ((UART_Type *)UART2_BASE) +#define UART2_BASE_PTR (UART2) +/** Array initializer of UART peripheral base addresses */ +#define UART_BASE_ADDRS { UART0_BASE, UART1_BASE, UART2_BASE } +/** Array initializer of UART peripheral base pointers */ +#define UART_BASE_PTRS { UART0, UART1, UART2 } +/** Interrupt vectors for the UART peripheral type */ +#define UART_RX_TX_IRQS { UART0_RX_TX_IRQn, UART1_RX_TX_IRQn, UART2_RX_TX_IRQn } +#define UART_ERR_IRQS { UART0_ERR_IRQn, UART1_ERR_IRQn, UART2_ERR_IRQn } + +/* ---------------------------------------------------------------------------- + -- UART - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup UART_Register_Accessor_Macros UART - Register accessor macros + * @{ + */ + + +/* UART - Register instance definitions */ +/* UART0 */ +#define UART0_BDH UART_BDH_REG(UART0) +#define UART0_BDL UART_BDL_REG(UART0) +#define UART0_C1 UART_C1_REG(UART0) +#define UART0_C2 UART_C2_REG(UART0) +#define UART0_S1 UART_S1_REG(UART0) +#define UART0_S2 UART_S2_REG(UART0) +#define UART0_C3 UART_C3_REG(UART0) +#define UART0_D UART_D_REG(UART0) +#define UART0_MA1 UART_MA1_REG(UART0) +#define UART0_MA2 UART_MA2_REG(UART0) +#define UART0_C4 UART_C4_REG(UART0) +#define UART0_C5 UART_C5_REG(UART0) +#define UART0_ED UART_ED_REG(UART0) +#define UART0_MODEM UART_MODEM_REG(UART0) +#define UART0_IR UART_IR_REG(UART0) +#define UART0_PFIFO UART_PFIFO_REG(UART0) +#define UART0_CFIFO UART_CFIFO_REG(UART0) +#define UART0_SFIFO UART_SFIFO_REG(UART0) +#define UART0_TWFIFO UART_TWFIFO_REG(UART0) +#define UART0_TCFIFO UART_TCFIFO_REG(UART0) +#define UART0_RWFIFO UART_RWFIFO_REG(UART0) +#define UART0_RCFIFO UART_RCFIFO_REG(UART0) +#define UART0_C7816 UART_C7816_REG(UART0) +#define UART0_IE7816 UART_IE7816_REG(UART0) +#define UART0_IS7816 UART_IS7816_REG(UART0) +#define UART0_WP7816 UART_WP7816_REG(UART0) +#define UART0_WN7816 UART_WN7816_REG(UART0) +#define UART0_WF7816 UART_WF7816_REG(UART0) +#define UART0_ET7816 UART_ET7816_REG(UART0) +#define UART0_TL7816 UART_TL7816_REG(UART0) +#define UART0_AP7816A_T0 UART_AP7816A_T0_REG(UART0) +#define UART0_AP7816B_T0 UART_AP7816B_T0_REG(UART0) +#define UART0_WP7816A_T0 UART_WP7816A_T0_REG(UART0) +#define UART0_WP7816A_T1 UART_WP7816A_T1_REG(UART0) +#define UART0_WP7816B_T0 UART_WP7816B_T0_REG(UART0) +#define UART0_WP7816B_T1 UART_WP7816B_T1_REG(UART0) +#define UART0_WGP7816_T1 UART_WGP7816_T1_REG(UART0) +#define UART0_WP7816C_T1 UART_WP7816C_T1_REG(UART0) +/* UART1 */ +#define UART1_BDH UART_BDH_REG(UART1) +#define UART1_BDL UART_BDL_REG(UART1) +#define UART1_C1 UART_C1_REG(UART1) +#define UART1_C2 UART_C2_REG(UART1) +#define UART1_S1 UART_S1_REG(UART1) +#define UART1_S2 UART_S2_REG(UART1) +#define UART1_C3 UART_C3_REG(UART1) +#define UART1_D UART_D_REG(UART1) +#define UART1_MA1 UART_MA1_REG(UART1) +#define UART1_MA2 UART_MA2_REG(UART1) +#define UART1_C4 UART_C4_REG(UART1) +#define UART1_C5 UART_C5_REG(UART1) +#define UART1_ED UART_ED_REG(UART1) +#define UART1_MODEM UART_MODEM_REG(UART1) +#define UART1_IR UART_IR_REG(UART1) +#define UART1_PFIFO UART_PFIFO_REG(UART1) +#define UART1_CFIFO UART_CFIFO_REG(UART1) +#define UART1_SFIFO UART_SFIFO_REG(UART1) +#define UART1_TWFIFO UART_TWFIFO_REG(UART1) +#define UART1_TCFIFO UART_TCFIFO_REG(UART1) +#define UART1_RWFIFO UART_RWFIFO_REG(UART1) +#define UART1_RCFIFO UART_RCFIFO_REG(UART1) +/* UART2 */ +#define UART2_BDH UART_BDH_REG(UART2) +#define UART2_BDL UART_BDL_REG(UART2) +#define UART2_C1 UART_C1_REG(UART2) +#define UART2_C2 UART_C2_REG(UART2) +#define UART2_S1 UART_S1_REG(UART2) +#define UART2_S2 UART_S2_REG(UART2) +#define UART2_C3 UART_C3_REG(UART2) +#define UART2_D UART_D_REG(UART2) +#define UART2_MA1 UART_MA1_REG(UART2) +#define UART2_MA2 UART_MA2_REG(UART2) +#define UART2_C4 UART_C4_REG(UART2) +#define UART2_C5 UART_C5_REG(UART2) +#define UART2_ED UART_ED_REG(UART2) +#define UART2_MODEM UART_MODEM_REG(UART2) +#define UART2_IR UART_IR_REG(UART2) +#define UART2_PFIFO UART_PFIFO_REG(UART2) +#define UART2_CFIFO UART_CFIFO_REG(UART2) +#define UART2_SFIFO UART_SFIFO_REG(UART2) +#define UART2_TWFIFO UART_TWFIFO_REG(UART2) +#define UART2_TCFIFO UART_TCFIFO_REG(UART2) +#define UART2_RWFIFO UART_RWFIFO_REG(UART2) +#define UART2_RCFIFO UART_RCFIFO_REG(UART2) + +/*! + * @} + */ /* end of group UART_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group UART_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- USB Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup USB_Peripheral_Access_Layer USB Peripheral Access Layer + * @{ + */ + +/** USB - Register Layout Typedef */ +typedef struct { + __I uint8_t PERID; /**< Peripheral ID register, offset: 0x0 */ + uint8_t RESERVED_0[3]; + __I uint8_t IDCOMP; /**< Peripheral ID Complement register, offset: 0x4 */ + uint8_t RESERVED_1[3]; + __I uint8_t REV; /**< Peripheral Revision register, offset: 0x8 */ + uint8_t RESERVED_2[3]; + __I uint8_t ADDINFO; /**< Peripheral Additional Info register, offset: 0xC */ + uint8_t RESERVED_3[3]; + __IO uint8_t OTGISTAT; /**< OTG Interrupt Status register, offset: 0x10 */ + uint8_t RESERVED_4[3]; + __IO uint8_t OTGICR; /**< OTG Interrupt Control register, offset: 0x14 */ + uint8_t RESERVED_5[3]; + __IO uint8_t OTGSTAT; /**< OTG Status register, offset: 0x18 */ + uint8_t RESERVED_6[3]; + __IO uint8_t OTGCTL; /**< OTG Control register, offset: 0x1C */ + uint8_t RESERVED_7[99]; + __IO uint8_t ISTAT; /**< Interrupt Status register, offset: 0x80 */ + uint8_t RESERVED_8[3]; + __IO uint8_t INTEN; /**< Interrupt Enable register, offset: 0x84 */ + uint8_t RESERVED_9[3]; + __IO uint8_t ERRSTAT; /**< Error Interrupt Status register, offset: 0x88 */ + uint8_t RESERVED_10[3]; + __IO uint8_t ERREN; /**< Error Interrupt Enable register, offset: 0x8C */ + uint8_t RESERVED_11[3]; + __I uint8_t STAT; /**< Status register, offset: 0x90 */ + uint8_t RESERVED_12[3]; + __IO uint8_t CTL; /**< Control register, offset: 0x94 */ + uint8_t RESERVED_13[3]; + __IO uint8_t ADDR; /**< Address register, offset: 0x98 */ + uint8_t RESERVED_14[3]; + __IO uint8_t BDTPAGE1; /**< BDT Page register 1, offset: 0x9C */ + uint8_t RESERVED_15[3]; + __IO uint8_t FRMNUML; /**< Frame Number register Low, offset: 0xA0 */ + uint8_t RESERVED_16[3]; + __IO uint8_t FRMNUMH; /**< Frame Number register High, offset: 0xA4 */ + uint8_t RESERVED_17[3]; + __IO uint8_t TOKEN; /**< Token register, offset: 0xA8 */ + uint8_t RESERVED_18[3]; + __IO uint8_t SOFTHLD; /**< SOF Threshold register, offset: 0xAC */ + uint8_t RESERVED_19[3]; + __IO uint8_t BDTPAGE2; /**< BDT Page Register 2, offset: 0xB0 */ + uint8_t RESERVED_20[3]; + __IO uint8_t BDTPAGE3; /**< BDT Page Register 3, offset: 0xB4 */ + uint8_t RESERVED_21[11]; + struct { /* offset: 0xC0, array step: 0x4 */ + __IO uint8_t ENDPT; /**< Endpoint Control register, array offset: 0xC0, array step: 0x4 */ + uint8_t RESERVED_0[3]; + } ENDPOINT[16]; + __IO uint8_t USBCTRL; /**< USB Control register, offset: 0x100 */ + uint8_t RESERVED_22[3]; + __I uint8_t OBSERVE; /**< USB OTG Observe register, offset: 0x104 */ + uint8_t RESERVED_23[3]; + __IO uint8_t CONTROL; /**< USB OTG Control register, offset: 0x108 */ + uint8_t RESERVED_24[3]; + __IO uint8_t USBTRC0; /**< USB Transceiver Control register 0, offset: 0x10C */ + uint8_t RESERVED_25[7]; + __IO uint8_t USBFRMADJUST; /**< Frame Adjust Register, offset: 0x114 */ + uint8_t RESERVED_26[43]; + __IO uint8_t CLK_RECOVER_CTRL; /**< USB Clock recovery control, offset: 0x140 */ + uint8_t RESERVED_27[3]; + __IO uint8_t CLK_RECOVER_IRC_EN; /**< IRC48M oscillator enable register, offset: 0x144 */ + uint8_t RESERVED_28[23]; + __IO uint8_t CLK_RECOVER_INT_STATUS; /**< Clock recovery separated interrupt status, offset: 0x15C */ +} USB_Type, *USB_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- USB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup USB_Register_Accessor_Macros USB - Register accessor macros + * @{ + */ + + +/* USB - Register accessors */ +#define USB_PERID_REG(base) ((base)->PERID) +#define USB_IDCOMP_REG(base) ((base)->IDCOMP) +#define USB_REV_REG(base) ((base)->REV) +#define USB_ADDINFO_REG(base) ((base)->ADDINFO) +#define USB_OTGISTAT_REG(base) ((base)->OTGISTAT) +#define USB_OTGICR_REG(base) ((base)->OTGICR) +#define USB_OTGSTAT_REG(base) ((base)->OTGSTAT) +#define USB_OTGCTL_REG(base) ((base)->OTGCTL) +#define USB_ISTAT_REG(base) ((base)->ISTAT) +#define USB_INTEN_REG(base) ((base)->INTEN) +#define USB_ERRSTAT_REG(base) ((base)->ERRSTAT) +#define USB_ERREN_REG(base) ((base)->ERREN) +#define USB_STAT_REG(base) ((base)->STAT) +#define USB_CTL_REG(base) ((base)->CTL) +#define USB_ADDR_REG(base) ((base)->ADDR) +#define USB_BDTPAGE1_REG(base) ((base)->BDTPAGE1) +#define USB_FRMNUML_REG(base) ((base)->FRMNUML) +#define USB_FRMNUMH_REG(base) ((base)->FRMNUMH) +#define USB_TOKEN_REG(base) ((base)->TOKEN) +#define USB_SOFTHLD_REG(base) ((base)->SOFTHLD) +#define USB_BDTPAGE2_REG(base) ((base)->BDTPAGE2) +#define USB_BDTPAGE3_REG(base) ((base)->BDTPAGE3) +#define USB_ENDPT_REG(base,index) ((base)->ENDPOINT[index].ENDPT) +#define USB_USBCTRL_REG(base) ((base)->USBCTRL) +#define USB_OBSERVE_REG(base) ((base)->OBSERVE) +#define USB_CONTROL_REG(base) ((base)->CONTROL) +#define USB_USBTRC0_REG(base) ((base)->USBTRC0) +#define USB_USBFRMADJUST_REG(base) ((base)->USBFRMADJUST) +#define USB_CLK_RECOVER_CTRL_REG(base) ((base)->CLK_RECOVER_CTRL) +#define USB_CLK_RECOVER_IRC_EN_REG(base) ((base)->CLK_RECOVER_IRC_EN) +#define USB_CLK_RECOVER_INT_STATUS_REG(base) ((base)->CLK_RECOVER_INT_STATUS) + +/*! + * @} + */ /* end of group USB_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- USB Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup USB_Register_Masks USB Register Masks + * @{ + */ + +/* PERID Bit Fields */ +#define USB_PERID_ID_MASK 0x3Fu +#define USB_PERID_ID_SHIFT 0 +#define USB_PERID_ID(x) (((uint8_t)(((uint8_t)(x))<<USB_PERID_ID_SHIFT))&USB_PERID_ID_MASK) +/* IDCOMP Bit Fields */ +#define USB_IDCOMP_NID_MASK 0x3Fu +#define USB_IDCOMP_NID_SHIFT 0 +#define USB_IDCOMP_NID(x) (((uint8_t)(((uint8_t)(x))<<USB_IDCOMP_NID_SHIFT))&USB_IDCOMP_NID_MASK) +/* REV Bit Fields */ +#define USB_REV_REV_MASK 0xFFu +#define USB_REV_REV_SHIFT 0 +#define USB_REV_REV(x) (((uint8_t)(((uint8_t)(x))<<USB_REV_REV_SHIFT))&USB_REV_REV_MASK) +/* ADDINFO Bit Fields */ +#define USB_ADDINFO_IEHOST_MASK 0x1u +#define USB_ADDINFO_IEHOST_SHIFT 0 +/* OTGISTAT Bit Fields */ +#define USB_OTGISTAT_AVBUSCHG_MASK 0x1u +#define USB_OTGISTAT_AVBUSCHG_SHIFT 0 +#define USB_OTGISTAT_B_SESS_CHG_MASK 0x4u +#define USB_OTGISTAT_B_SESS_CHG_SHIFT 2 +#define USB_OTGISTAT_SESSVLDCHG_MASK 0x8u +#define USB_OTGISTAT_SESSVLDCHG_SHIFT 3 +#define USB_OTGISTAT_LINE_STATE_CHG_MASK 0x20u +#define USB_OTGISTAT_LINE_STATE_CHG_SHIFT 5 +#define USB_OTGISTAT_ONEMSEC_MASK 0x40u +#define USB_OTGISTAT_ONEMSEC_SHIFT 6 +#define USB_OTGISTAT_IDCHG_MASK 0x80u +#define USB_OTGISTAT_IDCHG_SHIFT 7 +/* OTGICR Bit Fields */ +#define USB_OTGICR_AVBUSEN_MASK 0x1u +#define USB_OTGICR_AVBUSEN_SHIFT 0 +#define USB_OTGICR_BSESSEN_MASK 0x4u +#define USB_OTGICR_BSESSEN_SHIFT 2 +#define USB_OTGICR_SESSVLDEN_MASK 0x8u +#define USB_OTGICR_SESSVLDEN_SHIFT 3 +#define USB_OTGICR_LINESTATEEN_MASK 0x20u +#define USB_OTGICR_LINESTATEEN_SHIFT 5 +#define USB_OTGICR_ONEMSECEN_MASK 0x40u +#define USB_OTGICR_ONEMSECEN_SHIFT 6 +#define USB_OTGICR_IDEN_MASK 0x80u +#define USB_OTGICR_IDEN_SHIFT 7 +/* OTGSTAT Bit Fields */ +#define USB_OTGSTAT_AVBUSVLD_MASK 0x1u +#define USB_OTGSTAT_AVBUSVLD_SHIFT 0 +#define USB_OTGSTAT_BSESSEND_MASK 0x4u +#define USB_OTGSTAT_BSESSEND_SHIFT 2 +#define USB_OTGSTAT_SESS_VLD_MASK 0x8u +#define USB_OTGSTAT_SESS_VLD_SHIFT 3 +#define USB_OTGSTAT_LINESTATESTABLE_MASK 0x20u +#define USB_OTGSTAT_LINESTATESTABLE_SHIFT 5 +#define USB_OTGSTAT_ONEMSECEN_MASK 0x40u +#define USB_OTGSTAT_ONEMSECEN_SHIFT 6 +#define USB_OTGSTAT_ID_MASK 0x80u +#define USB_OTGSTAT_ID_SHIFT 7 +/* OTGCTL Bit Fields */ +#define USB_OTGCTL_OTGEN_MASK 0x4u +#define USB_OTGCTL_OTGEN_SHIFT 2 +#define USB_OTGCTL_DMLOW_MASK 0x10u +#define USB_OTGCTL_DMLOW_SHIFT 4 +#define USB_OTGCTL_DPLOW_MASK 0x20u +#define USB_OTGCTL_DPLOW_SHIFT 5 +#define USB_OTGCTL_DPHIGH_MASK 0x80u +#define USB_OTGCTL_DPHIGH_SHIFT 7 +/* ISTAT Bit Fields */ +#define USB_ISTAT_USBRST_MASK 0x1u +#define USB_ISTAT_USBRST_SHIFT 0 +#define USB_ISTAT_ERROR_MASK 0x2u +#define USB_ISTAT_ERROR_SHIFT 1 +#define USB_ISTAT_SOFTOK_MASK 0x4u +#define USB_ISTAT_SOFTOK_SHIFT 2 +#define USB_ISTAT_TOKDNE_MASK 0x8u +#define USB_ISTAT_TOKDNE_SHIFT 3 +#define USB_ISTAT_SLEEP_MASK 0x10u +#define USB_ISTAT_SLEEP_SHIFT 4 +#define USB_ISTAT_RESUME_MASK 0x20u +#define USB_ISTAT_RESUME_SHIFT 5 +#define USB_ISTAT_ATTACH_MASK 0x40u +#define USB_ISTAT_ATTACH_SHIFT 6 +#define USB_ISTAT_STALL_MASK 0x80u +#define USB_ISTAT_STALL_SHIFT 7 +/* INTEN Bit Fields */ +#define USB_INTEN_USBRSTEN_MASK 0x1u +#define USB_INTEN_USBRSTEN_SHIFT 0 +#define USB_INTEN_ERROREN_MASK 0x2u +#define USB_INTEN_ERROREN_SHIFT 1 +#define USB_INTEN_SOFTOKEN_MASK 0x4u +#define USB_INTEN_SOFTOKEN_SHIFT 2 +#define USB_INTEN_TOKDNEEN_MASK 0x8u +#define USB_INTEN_TOKDNEEN_SHIFT 3 +#define USB_INTEN_SLEEPEN_MASK 0x10u +#define USB_INTEN_SLEEPEN_SHIFT 4 +#define USB_INTEN_RESUMEEN_MASK 0x20u +#define USB_INTEN_RESUMEEN_SHIFT 5 +#define USB_INTEN_ATTACHEN_MASK 0x40u +#define USB_INTEN_ATTACHEN_SHIFT 6 +#define USB_INTEN_STALLEN_MASK 0x80u +#define USB_INTEN_STALLEN_SHIFT 7 +/* ERRSTAT Bit Fields */ +#define USB_ERRSTAT_PIDERR_MASK 0x1u +#define USB_ERRSTAT_PIDERR_SHIFT 0 +#define USB_ERRSTAT_CRC5EOF_MASK 0x2u +#define USB_ERRSTAT_CRC5EOF_SHIFT 1 +#define USB_ERRSTAT_CRC16_MASK 0x4u +#define USB_ERRSTAT_CRC16_SHIFT 2 +#define USB_ERRSTAT_DFN8_MASK 0x8u +#define USB_ERRSTAT_DFN8_SHIFT 3 +#define USB_ERRSTAT_BTOERR_MASK 0x10u +#define USB_ERRSTAT_BTOERR_SHIFT 4 +#define USB_ERRSTAT_DMAERR_MASK 0x20u +#define USB_ERRSTAT_DMAERR_SHIFT 5 +#define USB_ERRSTAT_BTSERR_MASK 0x80u +#define USB_ERRSTAT_BTSERR_SHIFT 7 +/* ERREN Bit Fields */ +#define USB_ERREN_PIDERREN_MASK 0x1u +#define USB_ERREN_PIDERREN_SHIFT 0 +#define USB_ERREN_CRC5EOFEN_MASK 0x2u +#define USB_ERREN_CRC5EOFEN_SHIFT 1 +#define USB_ERREN_CRC16EN_MASK 0x4u +#define USB_ERREN_CRC16EN_SHIFT 2 +#define USB_ERREN_DFN8EN_MASK 0x8u +#define USB_ERREN_DFN8EN_SHIFT 3 +#define USB_ERREN_BTOERREN_MASK 0x10u +#define USB_ERREN_BTOERREN_SHIFT 4 +#define USB_ERREN_DMAERREN_MASK 0x20u +#define USB_ERREN_DMAERREN_SHIFT 5 +#define USB_ERREN_BTSERREN_MASK 0x80u +#define USB_ERREN_BTSERREN_SHIFT 7 +/* STAT Bit Fields */ +#define USB_STAT_ODD_MASK 0x4u +#define USB_STAT_ODD_SHIFT 2 +#define USB_STAT_TX_MASK 0x8u +#define USB_STAT_TX_SHIFT 3 +#define USB_STAT_ENDP_MASK 0xF0u +#define USB_STAT_ENDP_SHIFT 4 +#define USB_STAT_ENDP(x) (((uint8_t)(((uint8_t)(x))<<USB_STAT_ENDP_SHIFT))&USB_STAT_ENDP_MASK) +/* CTL Bit Fields */ +#define USB_CTL_USBENSOFEN_MASK 0x1u +#define USB_CTL_USBENSOFEN_SHIFT 0 +#define USB_CTL_ODDRST_MASK 0x2u +#define USB_CTL_ODDRST_SHIFT 1 +#define USB_CTL_RESUME_MASK 0x4u +#define USB_CTL_RESUME_SHIFT 2 +#define USB_CTL_HOSTMODEEN_MASK 0x8u +#define USB_CTL_HOSTMODEEN_SHIFT 3 +#define USB_CTL_RESET_MASK 0x10u +#define USB_CTL_RESET_SHIFT 4 +#define USB_CTL_TXSUSPENDTOKENBUSY_MASK 0x20u +#define USB_CTL_TXSUSPENDTOKENBUSY_SHIFT 5 +#define USB_CTL_SE0_MASK 0x40u +#define USB_CTL_SE0_SHIFT 6 +#define USB_CTL_JSTATE_MASK 0x80u +#define USB_CTL_JSTATE_SHIFT 7 +/* ADDR Bit Fields */ +#define USB_ADDR_ADDR_MASK 0x7Fu +#define USB_ADDR_ADDR_SHIFT 0 +#define USB_ADDR_ADDR(x) (((uint8_t)(((uint8_t)(x))<<USB_ADDR_ADDR_SHIFT))&USB_ADDR_ADDR_MASK) +#define USB_ADDR_LSEN_MASK 0x80u +#define USB_ADDR_LSEN_SHIFT 7 +/* BDTPAGE1 Bit Fields */ +#define USB_BDTPAGE1_BDTBA_MASK 0xFEu +#define USB_BDTPAGE1_BDTBA_SHIFT 1 +#define USB_BDTPAGE1_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE1_BDTBA_SHIFT))&USB_BDTPAGE1_BDTBA_MASK) +/* FRMNUML Bit Fields */ +#define USB_FRMNUML_FRM_MASK 0xFFu +#define USB_FRMNUML_FRM_SHIFT 0 +#define USB_FRMNUML_FRM(x) (((uint8_t)(((uint8_t)(x))<<USB_FRMNUML_FRM_SHIFT))&USB_FRMNUML_FRM_MASK) +/* FRMNUMH Bit Fields */ +#define USB_FRMNUMH_FRM_MASK 0x7u +#define USB_FRMNUMH_FRM_SHIFT 0 +#define USB_FRMNUMH_FRM(x) (((uint8_t)(((uint8_t)(x))<<USB_FRMNUMH_FRM_SHIFT))&USB_FRMNUMH_FRM_MASK) +/* TOKEN Bit Fields */ +#define USB_TOKEN_TOKENENDPT_MASK 0xFu +#define USB_TOKEN_TOKENENDPT_SHIFT 0 +#define USB_TOKEN_TOKENENDPT(x) (((uint8_t)(((uint8_t)(x))<<USB_TOKEN_TOKENENDPT_SHIFT))&USB_TOKEN_TOKENENDPT_MASK) +#define USB_TOKEN_TOKENPID_MASK 0xF0u +#define USB_TOKEN_TOKENPID_SHIFT 4 +#define USB_TOKEN_TOKENPID(x) (((uint8_t)(((uint8_t)(x))<<USB_TOKEN_TOKENPID_SHIFT))&USB_TOKEN_TOKENPID_MASK) +/* SOFTHLD Bit Fields */ +#define USB_SOFTHLD_CNT_MASK 0xFFu +#define USB_SOFTHLD_CNT_SHIFT 0 +#define USB_SOFTHLD_CNT(x) (((uint8_t)(((uint8_t)(x))<<USB_SOFTHLD_CNT_SHIFT))&USB_SOFTHLD_CNT_MASK) +/* BDTPAGE2 Bit Fields */ +#define USB_BDTPAGE2_BDTBA_MASK 0xFFu +#define USB_BDTPAGE2_BDTBA_SHIFT 0 +#define USB_BDTPAGE2_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE2_BDTBA_SHIFT))&USB_BDTPAGE2_BDTBA_MASK) +/* BDTPAGE3 Bit Fields */ +#define USB_BDTPAGE3_BDTBA_MASK 0xFFu +#define USB_BDTPAGE3_BDTBA_SHIFT 0 +#define USB_BDTPAGE3_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE3_BDTBA_SHIFT))&USB_BDTPAGE3_BDTBA_MASK) +/* ENDPT Bit Fields */ +#define USB_ENDPT_EPHSHK_MASK 0x1u +#define USB_ENDPT_EPHSHK_SHIFT 0 +#define USB_ENDPT_EPSTALL_MASK 0x2u +#define USB_ENDPT_EPSTALL_SHIFT 1 +#define USB_ENDPT_EPTXEN_MASK 0x4u +#define USB_ENDPT_EPTXEN_SHIFT 2 +#define USB_ENDPT_EPRXEN_MASK 0x8u +#define USB_ENDPT_EPRXEN_SHIFT 3 +#define USB_ENDPT_EPCTLDIS_MASK 0x10u +#define USB_ENDPT_EPCTLDIS_SHIFT 4 +#define USB_ENDPT_RETRYDIS_MASK 0x40u +#define USB_ENDPT_RETRYDIS_SHIFT 6 +#define USB_ENDPT_HOSTWOHUB_MASK 0x80u +#define USB_ENDPT_HOSTWOHUB_SHIFT 7 +/* USBCTRL Bit Fields */ +#define USB_USBCTRL_PDE_MASK 0x40u +#define USB_USBCTRL_PDE_SHIFT 6 +#define USB_USBCTRL_SUSP_MASK 0x80u +#define USB_USBCTRL_SUSP_SHIFT 7 +/* OBSERVE Bit Fields */ +#define USB_OBSERVE_DMPD_MASK 0x10u +#define USB_OBSERVE_DMPD_SHIFT 4 +#define USB_OBSERVE_DPPD_MASK 0x40u +#define USB_OBSERVE_DPPD_SHIFT 6 +#define USB_OBSERVE_DPPU_MASK 0x80u +#define USB_OBSERVE_DPPU_SHIFT 7 +/* CONTROL Bit Fields */ +#define USB_CONTROL_DPPULLUPNONOTG_MASK 0x10u +#define USB_CONTROL_DPPULLUPNONOTG_SHIFT 4 +/* USBTRC0 Bit Fields */ +#define USB_USBTRC0_USB_RESUME_INT_MASK 0x1u +#define USB_USBTRC0_USB_RESUME_INT_SHIFT 0 +#define USB_USBTRC0_SYNC_DET_MASK 0x2u +#define USB_USBTRC0_SYNC_DET_SHIFT 1 +#define USB_USBTRC0_USB_CLK_RECOVERY_INT_MASK 0x4u +#define USB_USBTRC0_USB_CLK_RECOVERY_INT_SHIFT 2 +#define USB_USBTRC0_USBRESMEN_MASK 0x20u +#define USB_USBTRC0_USBRESMEN_SHIFT 5 +#define USB_USBTRC0_USBRESET_MASK 0x80u +#define USB_USBTRC0_USBRESET_SHIFT 7 +/* USBFRMADJUST Bit Fields */ +#define USB_USBFRMADJUST_ADJ_MASK 0xFFu +#define USB_USBFRMADJUST_ADJ_SHIFT 0 +#define USB_USBFRMADJUST_ADJ(x) (((uint8_t)(((uint8_t)(x))<<USB_USBFRMADJUST_ADJ_SHIFT))&USB_USBFRMADJUST_ADJ_MASK) +/* CLK_RECOVER_CTRL Bit Fields */ +#define USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN_MASK 0x20u +#define USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN_SHIFT 5 +#define USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN_MASK 0x40u +#define USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN_SHIFT 6 +#define USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN_MASK 0x80u +#define USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN_SHIFT 7 +/* CLK_RECOVER_IRC_EN Bit Fields */ +#define USB_CLK_RECOVER_IRC_EN_REG_EN_MASK 0x1u +#define USB_CLK_RECOVER_IRC_EN_REG_EN_SHIFT 0 +#define USB_CLK_RECOVER_IRC_EN_IRC_EN_MASK 0x2u +#define USB_CLK_RECOVER_IRC_EN_IRC_EN_SHIFT 1 +/* CLK_RECOVER_INT_STATUS Bit Fields */ +#define USB_CLK_RECOVER_INT_STATUS_OVF_ERROR_MASK 0x10u +#define USB_CLK_RECOVER_INT_STATUS_OVF_ERROR_SHIFT 4 + +/*! + * @} + */ /* end of group USB_Register_Masks */ + + +/* USB - Peripheral instance base addresses */ +/** Peripheral USB0 base address */ +#define USB0_BASE (0x40072000u) +/** Peripheral USB0 base pointer */ +#define USB0 ((USB_Type *)USB0_BASE) +#define USB0_BASE_PTR (USB0) +/** Array initializer of USB peripheral base addresses */ +#define USB_BASE_ADDRS { USB0_BASE } +/** Array initializer of USB peripheral base pointers */ +#define USB_BASE_PTRS { USB0 } +/** Interrupt vectors for the USB peripheral type */ +#define USB_IRQS { USB0_IRQn } + +/* ---------------------------------------------------------------------------- + -- USB - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup USB_Register_Accessor_Macros USB - Register accessor macros + * @{ + */ + + +/* USB - Register instance definitions */ +/* USB0 */ +#define USB0_PERID USB_PERID_REG(USB0) +#define USB0_IDCOMP USB_IDCOMP_REG(USB0) +#define USB0_REV USB_REV_REG(USB0) +#define USB0_ADDINFO USB_ADDINFO_REG(USB0) +#define USB0_OTGISTAT USB_OTGISTAT_REG(USB0) +#define USB0_OTGICR USB_OTGICR_REG(USB0) +#define USB0_OTGSTAT USB_OTGSTAT_REG(USB0) +#define USB0_OTGCTL USB_OTGCTL_REG(USB0) +#define USB0_ISTAT USB_ISTAT_REG(USB0) +#define USB0_INTEN USB_INTEN_REG(USB0) +#define USB0_ERRSTAT USB_ERRSTAT_REG(USB0) +#define USB0_ERREN USB_ERREN_REG(USB0) +#define USB0_STAT USB_STAT_REG(USB0) +#define USB0_CTL USB_CTL_REG(USB0) +#define USB0_ADDR USB_ADDR_REG(USB0) +#define USB0_BDTPAGE1 USB_BDTPAGE1_REG(USB0) +#define USB0_FRMNUML USB_FRMNUML_REG(USB0) +#define USB0_FRMNUMH USB_FRMNUMH_REG(USB0) +#define USB0_TOKEN USB_TOKEN_REG(USB0) +#define USB0_SOFTHLD USB_SOFTHLD_REG(USB0) +#define USB0_BDTPAGE2 USB_BDTPAGE2_REG(USB0) +#define USB0_BDTPAGE3 USB_BDTPAGE3_REG(USB0) +#define USB0_ENDPT0 USB_ENDPT_REG(USB0,0) +#define USB0_ENDPT1 USB_ENDPT_REG(USB0,1) +#define USB0_ENDPT2 USB_ENDPT_REG(USB0,2) +#define USB0_ENDPT3 USB_ENDPT_REG(USB0,3) +#define USB0_ENDPT4 USB_ENDPT_REG(USB0,4) +#define USB0_ENDPT5 USB_ENDPT_REG(USB0,5) +#define USB0_ENDPT6 USB_ENDPT_REG(USB0,6) +#define USB0_ENDPT7 USB_ENDPT_REG(USB0,7) +#define USB0_ENDPT8 USB_ENDPT_REG(USB0,8) +#define USB0_ENDPT9 USB_ENDPT_REG(USB0,9) +#define USB0_ENDPT10 USB_ENDPT_REG(USB0,10) +#define USB0_ENDPT11 USB_ENDPT_REG(USB0,11) +#define USB0_ENDPT12 USB_ENDPT_REG(USB0,12) +#define USB0_ENDPT13 USB_ENDPT_REG(USB0,13) +#define USB0_ENDPT14 USB_ENDPT_REG(USB0,14) +#define USB0_ENDPT15 USB_ENDPT_REG(USB0,15) +#define USB0_USBCTRL USB_USBCTRL_REG(USB0) +#define USB0_OBSERVE USB_OBSERVE_REG(USB0) +#define USB0_CONTROL USB_CONTROL_REG(USB0) +#define USB0_USBTRC0 USB_USBTRC0_REG(USB0) +#define USB0_USBFRMADJUST USB_USBFRMADJUST_REG(USB0) +#define USB0_CLK_RECOVER_CTRL USB_CLK_RECOVER_CTRL_REG(USB0) +#define USB0_CLK_RECOVER_IRC_EN USB_CLK_RECOVER_IRC_EN_REG(USB0) +#define USB0_CLK_RECOVER_INT_STATUS USB_CLK_RECOVER_INT_STATUS_REG(USB0) + +/* USB - Register array accessors */ +#define USB0_ENDPT(index) USB_ENDPT_REG(USB0,index) + +/*! + * @} + */ /* end of group USB_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group USB_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- VREF Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup VREF_Peripheral_Access_Layer VREF Peripheral Access Layer + * @{ + */ + +/** VREF - Register Layout Typedef */ +typedef struct { + __IO uint8_t TRM; /**< VREF Trim Register, offset: 0x0 */ + __IO uint8_t SC; /**< VREF Status and Control Register, offset: 0x1 */ +} VREF_Type, *VREF_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- VREF - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup VREF_Register_Accessor_Macros VREF - Register accessor macros + * @{ + */ + + +/* VREF - Register accessors */ +#define VREF_TRM_REG(base) ((base)->TRM) +#define VREF_SC_REG(base) ((base)->SC) + +/*! + * @} + */ /* end of group VREF_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- VREF Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup VREF_Register_Masks VREF Register Masks + * @{ + */ + +/* TRM Bit Fields */ +#define VREF_TRM_TRIM_MASK 0x3Fu +#define VREF_TRM_TRIM_SHIFT 0 +#define VREF_TRM_TRIM(x) (((uint8_t)(((uint8_t)(x))<<VREF_TRM_TRIM_SHIFT))&VREF_TRM_TRIM_MASK) +#define VREF_TRM_CHOPEN_MASK 0x40u +#define VREF_TRM_CHOPEN_SHIFT 6 +/* SC Bit Fields */ +#define VREF_SC_MODE_LV_MASK 0x3u +#define VREF_SC_MODE_LV_SHIFT 0 +#define VREF_SC_MODE_LV(x) (((uint8_t)(((uint8_t)(x))<<VREF_SC_MODE_LV_SHIFT))&VREF_SC_MODE_LV_MASK) +#define VREF_SC_VREFST_MASK 0x4u +#define VREF_SC_VREFST_SHIFT 2 +#define VREF_SC_ICOMPEN_MASK 0x20u +#define VREF_SC_ICOMPEN_SHIFT 5 +#define VREF_SC_REGEN_MASK 0x40u +#define VREF_SC_REGEN_SHIFT 6 +#define VREF_SC_VREFEN_MASK 0x80u +#define VREF_SC_VREFEN_SHIFT 7 + +/*! + * @} + */ /* end of group VREF_Register_Masks */ + + +/* VREF - Peripheral instance base addresses */ +/** Peripheral VREF base address */ +#define VREF_BASE (0x40074000u) +/** Peripheral VREF base pointer */ +#define VREF ((VREF_Type *)VREF_BASE) +#define VREF_BASE_PTR (VREF) +/** Array initializer of VREF peripheral base addresses */ +#define VREF_BASE_ADDRS { VREF_BASE } +/** Array initializer of VREF peripheral base pointers */ +#define VREF_BASE_PTRS { VREF } + +/* ---------------------------------------------------------------------------- + -- VREF - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup VREF_Register_Accessor_Macros VREF - Register accessor macros + * @{ + */ + + +/* VREF - Register instance definitions */ +/* VREF */ +#define VREF_TRM VREF_TRM_REG(VREF) +#define VREF_SC VREF_SC_REG(VREF) + +/*! + * @} + */ /* end of group VREF_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group VREF_Peripheral_Access_Layer */ + + +/* ---------------------------------------------------------------------------- + -- WDOG Peripheral Access Layer + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup WDOG_Peripheral_Access_Layer WDOG Peripheral Access Layer + * @{ + */ + +/** WDOG - Register Layout Typedef */ +typedef struct { + __IO uint16_t STCTRLH; /**< Watchdog Status and Control Register High, offset: 0x0 */ + __IO uint16_t STCTRLL; /**< Watchdog Status and Control Register Low, offset: 0x2 */ + __IO uint16_t TOVALH; /**< Watchdog Time-out Value Register High, offset: 0x4 */ + __IO uint16_t TOVALL; /**< Watchdog Time-out Value Register Low, offset: 0x6 */ + __IO uint16_t WINH; /**< Watchdog Window Register High, offset: 0x8 */ + __IO uint16_t WINL; /**< Watchdog Window Register Low, offset: 0xA */ + __IO uint16_t REFRESH; /**< Watchdog Refresh register, offset: 0xC */ + __IO uint16_t UNLOCK; /**< Watchdog Unlock register, offset: 0xE */ + __IO uint16_t TMROUTH; /**< Watchdog Timer Output Register High, offset: 0x10 */ + __IO uint16_t TMROUTL; /**< Watchdog Timer Output Register Low, offset: 0x12 */ + __IO uint16_t RSTCNT; /**< Watchdog Reset Count register, offset: 0x14 */ + __IO uint16_t PRESC; /**< Watchdog Prescaler register, offset: 0x16 */ +} WDOG_Type, *WDOG_MemMapPtr; + +/* ---------------------------------------------------------------------------- + -- WDOG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup WDOG_Register_Accessor_Macros WDOG - Register accessor macros + * @{ + */ + + +/* WDOG - Register accessors */ +#define WDOG_STCTRLH_REG(base) ((base)->STCTRLH) +#define WDOG_STCTRLL_REG(base) ((base)->STCTRLL) +#define WDOG_TOVALH_REG(base) ((base)->TOVALH) +#define WDOG_TOVALL_REG(base) ((base)->TOVALL) +#define WDOG_WINH_REG(base) ((base)->WINH) +#define WDOG_WINL_REG(base) ((base)->WINL) +#define WDOG_REFRESH_REG(base) ((base)->REFRESH) +#define WDOG_UNLOCK_REG(base) ((base)->UNLOCK) +#define WDOG_TMROUTH_REG(base) ((base)->TMROUTH) +#define WDOG_TMROUTL_REG(base) ((base)->TMROUTL) +#define WDOG_RSTCNT_REG(base) ((base)->RSTCNT) +#define WDOG_PRESC_REG(base) ((base)->PRESC) + +/*! + * @} + */ /* end of group WDOG_Register_Accessor_Macros */ + + +/* ---------------------------------------------------------------------------- + -- WDOG Register Masks + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup WDOG_Register_Masks WDOG Register Masks + * @{ + */ + +/* STCTRLH Bit Fields */ +#define WDOG_STCTRLH_WDOGEN_MASK 0x1u +#define WDOG_STCTRLH_WDOGEN_SHIFT 0 +#define WDOG_STCTRLH_CLKSRC_MASK 0x2u +#define WDOG_STCTRLH_CLKSRC_SHIFT 1 +#define WDOG_STCTRLH_IRQRSTEN_MASK 0x4u +#define WDOG_STCTRLH_IRQRSTEN_SHIFT 2 +#define WDOG_STCTRLH_WINEN_MASK 0x8u +#define WDOG_STCTRLH_WINEN_SHIFT 3 +#define WDOG_STCTRLH_ALLOWUPDATE_MASK 0x10u +#define WDOG_STCTRLH_ALLOWUPDATE_SHIFT 4 +#define WDOG_STCTRLH_DBGEN_MASK 0x20u +#define WDOG_STCTRLH_DBGEN_SHIFT 5 +#define WDOG_STCTRLH_STOPEN_MASK 0x40u +#define WDOG_STCTRLH_STOPEN_SHIFT 6 +#define WDOG_STCTRLH_WAITEN_MASK 0x80u +#define WDOG_STCTRLH_WAITEN_SHIFT 7 +#define WDOG_STCTRLH_TESTWDOG_MASK 0x400u +#define WDOG_STCTRLH_TESTWDOG_SHIFT 10 +#define WDOG_STCTRLH_TESTSEL_MASK 0x800u +#define WDOG_STCTRLH_TESTSEL_SHIFT 11 +#define WDOG_STCTRLH_BYTESEL_MASK 0x3000u +#define WDOG_STCTRLH_BYTESEL_SHIFT 12 +#define WDOG_STCTRLH_BYTESEL(x) (((uint16_t)(((uint16_t)(x))<<WDOG_STCTRLH_BYTESEL_SHIFT))&WDOG_STCTRLH_BYTESEL_MASK) +#define WDOG_STCTRLH_DISTESTWDOG_MASK 0x4000u +#define WDOG_STCTRLH_DISTESTWDOG_SHIFT 14 +/* STCTRLL Bit Fields */ +#define WDOG_STCTRLL_INTFLG_MASK 0x8000u +#define WDOG_STCTRLL_INTFLG_SHIFT 15 +/* TOVALH Bit Fields */ +#define WDOG_TOVALH_TOVALHIGH_MASK 0xFFFFu +#define WDOG_TOVALH_TOVALHIGH_SHIFT 0 +#define WDOG_TOVALH_TOVALHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TOVALH_TOVALHIGH_SHIFT))&WDOG_TOVALH_TOVALHIGH_MASK) +/* TOVALL Bit Fields */ +#define WDOG_TOVALL_TOVALLOW_MASK 0xFFFFu +#define WDOG_TOVALL_TOVALLOW_SHIFT 0 +#define WDOG_TOVALL_TOVALLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TOVALL_TOVALLOW_SHIFT))&WDOG_TOVALL_TOVALLOW_MASK) +/* WINH Bit Fields */ +#define WDOG_WINH_WINHIGH_MASK 0xFFFFu +#define WDOG_WINH_WINHIGH_SHIFT 0 +#define WDOG_WINH_WINHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_WINH_WINHIGH_SHIFT))&WDOG_WINH_WINHIGH_MASK) +/* WINL Bit Fields */ +#define WDOG_WINL_WINLOW_MASK 0xFFFFu +#define WDOG_WINL_WINLOW_SHIFT 0 +#define WDOG_WINL_WINLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_WINL_WINLOW_SHIFT))&WDOG_WINL_WINLOW_MASK) +/* REFRESH Bit Fields */ +#define WDOG_REFRESH_WDOGREFRESH_MASK 0xFFFFu +#define WDOG_REFRESH_WDOGREFRESH_SHIFT 0 +#define WDOG_REFRESH_WDOGREFRESH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_REFRESH_WDOGREFRESH_SHIFT))&WDOG_REFRESH_WDOGREFRESH_MASK) +/* UNLOCK Bit Fields */ +#define WDOG_UNLOCK_WDOGUNLOCK_MASK 0xFFFFu +#define WDOG_UNLOCK_WDOGUNLOCK_SHIFT 0 +#define WDOG_UNLOCK_WDOGUNLOCK(x) (((uint16_t)(((uint16_t)(x))<<WDOG_UNLOCK_WDOGUNLOCK_SHIFT))&WDOG_UNLOCK_WDOGUNLOCK_MASK) +/* TMROUTH Bit Fields */ +#define WDOG_TMROUTH_TIMEROUTHIGH_MASK 0xFFFFu +#define WDOG_TMROUTH_TIMEROUTHIGH_SHIFT 0 +#define WDOG_TMROUTH_TIMEROUTHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TMROUTH_TIMEROUTHIGH_SHIFT))&WDOG_TMROUTH_TIMEROUTHIGH_MASK) +/* TMROUTL Bit Fields */ +#define WDOG_TMROUTL_TIMEROUTLOW_MASK 0xFFFFu +#define WDOG_TMROUTL_TIMEROUTLOW_SHIFT 0 +#define WDOG_TMROUTL_TIMEROUTLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TMROUTL_TIMEROUTLOW_SHIFT))&WDOG_TMROUTL_TIMEROUTLOW_MASK) +/* RSTCNT Bit Fields */ +#define WDOG_RSTCNT_RSTCNT_MASK 0xFFFFu +#define WDOG_RSTCNT_RSTCNT_SHIFT 0 +#define WDOG_RSTCNT_RSTCNT(x) (((uint16_t)(((uint16_t)(x))<<WDOG_RSTCNT_RSTCNT_SHIFT))&WDOG_RSTCNT_RSTCNT_MASK) +/* PRESC Bit Fields */ +#define WDOG_PRESC_PRESCVAL_MASK 0x700u +#define WDOG_PRESC_PRESCVAL_SHIFT 8 +#define WDOG_PRESC_PRESCVAL(x) (((uint16_t)(((uint16_t)(x))<<WDOG_PRESC_PRESCVAL_SHIFT))&WDOG_PRESC_PRESCVAL_MASK) + +/*! + * @} + */ /* end of group WDOG_Register_Masks */ + + +/* WDOG - Peripheral instance base addresses */ +/** Peripheral WDOG base address */ +#define WDOG_BASE (0x40052000u) +/** Peripheral WDOG base pointer */ +#define WDOG ((WDOG_Type *)WDOG_BASE) +#define WDOG_BASE_PTR (WDOG) +/** Array initializer of WDOG peripheral base addresses */ +#define WDOG_BASE_ADDRS { WDOG_BASE } +/** Array initializer of WDOG peripheral base pointers */ +#define WDOG_BASE_PTRS { WDOG } +/** Interrupt vectors for the WDOG peripheral type */ +#define WDOG_IRQS { Watchdog_IRQn } + +/* ---------------------------------------------------------------------------- + -- WDOG - Register accessor macros + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup WDOG_Register_Accessor_Macros WDOG - Register accessor macros + * @{ + */ + + +/* WDOG - Register instance definitions */ +/* WDOG */ +#define WDOG_STCTRLH WDOG_STCTRLH_REG(WDOG) +#define WDOG_STCTRLL WDOG_STCTRLL_REG(WDOG) +#define WDOG_TOVALH WDOG_TOVALH_REG(WDOG) +#define WDOG_TOVALL WDOG_TOVALL_REG(WDOG) +#define WDOG_WINH WDOG_WINH_REG(WDOG) +#define WDOG_WINL WDOG_WINL_REG(WDOG) +#define WDOG_REFRESH WDOG_REFRESH_REG(WDOG) +#define WDOG_UNLOCK WDOG_UNLOCK_REG(WDOG) +#define WDOG_TMROUTH WDOG_TMROUTH_REG(WDOG) +#define WDOG_TMROUTL WDOG_TMROUTL_REG(WDOG) +#define WDOG_RSTCNT WDOG_RSTCNT_REG(WDOG) +#define WDOG_PRESC WDOG_PRESC_REG(WDOG) + +/*! + * @} + */ /* end of group WDOG_Register_Accessor_Macros */ + + +/*! + * @} + */ /* end of group WDOG_Peripheral_Access_Layer */ + + +/* +** End of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma pop +#elif defined(__CWCC__) + #pragma pop +#elif defined(__GNUC__) + /* leave anonymous unions enabled */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=default +#else + #error Not supported compiler type +#endif + +/*! + * @} + */ /* end of group Peripheral_access_layer */ + + +/* ---------------------------------------------------------------------------- + -- Backward Compatibility + ---------------------------------------------------------------------------- */ + +/*! + * @addtogroup Backward_Compatibility_Symbols Backward Compatibility + * @{ + */ + +#define MCG_C2_EREFS0_MASK MCG_C2_EREFS_MASK +#define MCG_C2_EREFS0_SHIFT MCG_C2_EREFS_SHIFT +#define MCG_C2_HGO0_MASK MCG_C2_HGO_MASK +#define MCG_C2_HGO0_SHIFT MCG_C2_HGO_SHIFT +#define MCG_C2_RANGE0_MASK MCG_C2_RANGE_MASK +#define MCG_C2_RANGE0_SHIFT MCG_C2_RANGE_SHIFT +#define MCG_C2_RANGE0(x) MCG_C2_RANGE(x) +#define MCM_ISR_REG(base) MCM_ISCR_REG(base) +#define MCM_ISR_FIOC_MASK MCM_ISCR_FIOC_MASK +#define MCM_ISR_FIOC_SHIFT MCM_ISCR_FIOC_SHIFT +#define MCM_ISR_FDZC_MASK MCM_ISCR_FDZC_MASK +#define MCM_ISR_FDZC_SHIFT MCM_ISCR_FDZC_SHIFT +#define MCM_ISR_FOFC_MASK MCM_ISCR_FOFC_MASK +#define MCM_ISR_FOFC_SHIFT MCM_ISCR_FOFC_SHIFT +#define MCM_ISR_FUFC_MASK MCM_ISCR_FUFC_MASK +#define MCM_ISR_FUFC_SHIFT MCM_ISCR_FUFC_SHIFT +#define MCM_ISR_FIXC_MASK MCM_ISCR_FIXC_MASK +#define MCM_ISR_FIXC_SHIFT MCM_ISCR_FIXC_SHIFT +#define MCM_ISR_FIDC_MASK MCM_ISCR_FIDC_MASK +#define MCM_ISR_FIDC_SHIFT MCM_ISCR_FIDC_SHIFT +#define MCM_ISR_FIOCE_MASK MCM_ISCR_FIOCE_MASK +#define MCM_ISR_FIOCE_SHIFT MCM_ISCR_FIOCE_SHIFT +#define MCM_ISR_FDZCE_MASK MCM_ISCR_FDZCE_MASK +#define MCM_ISR_FDZCE_SHIFT MCM_ISCR_FDZCE_SHIFT +#define MCM_ISR_FOFCE_MASK MCM_ISCR_FOFCE_MASK +#define MCM_ISR_FOFCE_SHIFT MCM_ISCR_FOFCE_SHIFT +#define MCM_ISR_FUFCE_MASK MCM_ISCR_FUFCE_MASK +#define MCM_ISR_FUFCE_SHIFT MCM_ISCR_FUFCE_SHIFT +#define MCM_ISR_FIXCE_MASK MCM_ISCR_FIXCE_MASK +#define MCM_ISR_FIXCE_SHIFT MCM_ISCR_FIXCE_SHIFT +#define MCM_ISR_FIDCE_MASK MCM_ISCR_FIDCE_MASK +#define MCM_ISR_FIDCE_SHIFT MCM_ISCR_FIDCE_SHIFT +#define USB_ADDINFO_IRQNUM_MASK This_symbol_has_been_deprecated +#define USB_ADDINFO_IRQNUM_SHIFT This_symbol_has_been_deprecated +#define USB_ADDINFO_IRQNUM(x) This_symbol_has_been_deprecated + +/*! + * @} + */ /* end of group Backward_Compatibility_Symbols */ + + +#else /* #if !defined(MK22F51212_H_) */ + /* There is already included the same memory map. Check if it is compatible (has the same major version) */ + #if (MCU_MEM_MAP_VERSION != 0x0200u) + #if (!defined(MCU_MEM_MAP_SUPPRESS_VERSION_WARNING)) + #warning There are included two not compatible versions of memory maps. Please check possible differences. + #endif /* (!defined(MCU_MEM_MAP_SUPPRESS_VERSION_WARNING)) */ + #endif /* (MCU_MEM_MAP_VERSION != 0x0200u) */ +#endif /* #if !defined(MK22F51212_H_) */ + +/* MK22F51212.h, eof. */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_adc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_adc.h new file mode 100644 index 0000000000..b99f9cb2d7 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_adc.h @@ -0,0 +1,2339 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_ADC_REGISTERS_H__ +#define __HW_ADC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 ADC + * + * Analog-to-Digital Converter + * + * Registers defined in this header file: + * - HW_ADC_SC1n - ADC Status and Control Registers 1 + * - HW_ADC_CFG1 - ADC Configuration Register 1 + * - HW_ADC_CFG2 - ADC Configuration Register 2 + * - HW_ADC_Rn - ADC Data Result Register + * - HW_ADC_CV1 - Compare Value Registers + * - HW_ADC_CV2 - Compare Value Registers + * - HW_ADC_SC2 - Status and Control Register 2 + * - HW_ADC_SC3 - Status and Control Register 3 + * - HW_ADC_OFS - ADC Offset Correction Register + * - HW_ADC_PG - ADC Plus-Side Gain Register + * - HW_ADC_MG - ADC Minus-Side Gain Register + * - HW_ADC_CLPD - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLPS - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLP4 - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLP3 - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLP2 - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLP1 - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLP0 - ADC Plus-Side General Calibration Value Register + * - HW_ADC_CLMD - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLMS - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLM4 - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLM3 - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLM2 - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLM1 - ADC Minus-Side General Calibration Value Register + * - HW_ADC_CLM0 - ADC Minus-Side General Calibration Value Register + * + * - hw_adc_t - Struct containing all module registers. + */ + +#define HW_ADC_INSTANCE_COUNT (2U) /*!< Number of instances of the ADC module. */ +#define HW_ADC0 (0U) /*!< Instance number for ADC0. */ +#define HW_ADC1 (1U) /*!< Instance number for ADC1. */ + +/******************************************************************************* + * HW_ADC_SC1n - ADC Status and Control Registers 1 + ******************************************************************************/ + +/*! + * @brief HW_ADC_SC1n - ADC Status and Control Registers 1 (RW) + * + * Reset value: 0x0000001FU + * + * SC1A is used for both software and hardware trigger modes of operation. To + * allow sequential conversions of the ADC to be triggered by internal peripherals, + * the ADC can have more than one status and control register: one for each + * conversion. The SC1B-SC1n registers indicate potentially multiple SC1 registers + * for use only in hardware trigger mode. See the chip configuration information + * about the number of SC1n registers specific to this device. The SC1n registers + * have identical fields, and are used in a "ping-pong" approach to control ADC + * operation. At any one point in time, only one of the SC1n registers is actively + * controlling ADC conversions. Updating SC1A while SC1n is actively controlling + * a conversion is allowed, and vice-versa for any of the SC1n registers specific + * to this MCU. Writing SC1A while SC1A is actively controlling a conversion + * aborts the current conversion. In Software Trigger mode, when SC2[ADTRG]=0, + * writes to SC1A subsequently initiate a new conversion, if SC1[ADCH] contains a + * value other than all 1s. Writing any of the SC1n registers while that specific + * SC1n register is actively controlling a conversion aborts the current conversion. + * None of the SC1B-SC1n registers are used for software trigger operation and + * therefore writes to the SC1B-SC1n registers do not initiate a new conversion. + */ +typedef union _hw_adc_sc1n +{ + uint32_t U; + struct _hw_adc_sc1n_bitfields + { + uint32_t ADCH : 5; /*!< [4:0] Input channel select */ + uint32_t DIFF : 1; /*!< [5] Differential Mode Enable */ + uint32_t AIEN : 1; /*!< [6] Interrupt Enable */ + uint32_t COCO : 1; /*!< [7] Conversion Complete Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_adc_sc1n_t; + +/*! + * @name Constants and macros for entire ADC_SC1n register + */ +/*@{*/ +#define HW_ADC_SC1n_COUNT (2U) + +#define HW_ADC_SC1n_ADDR(x, n) ((x) + 0x0U + (0x4U * (n))) + +#define HW_ADC_SC1n(x, n) (*(__IO hw_adc_sc1n_t *) HW_ADC_SC1n_ADDR(x, n)) +#define HW_ADC_SC1n_RD(x, n) (HW_ADC_SC1n(x, n).U) +#define HW_ADC_SC1n_WR(x, n, v) (HW_ADC_SC1n(x, n).U = (v)) +#define HW_ADC_SC1n_SET(x, n, v) (HW_ADC_SC1n_WR(x, n, HW_ADC_SC1n_RD(x, n) | (v))) +#define HW_ADC_SC1n_CLR(x, n, v) (HW_ADC_SC1n_WR(x, n, HW_ADC_SC1n_RD(x, n) & ~(v))) +#define HW_ADC_SC1n_TOG(x, n, v) (HW_ADC_SC1n_WR(x, n, HW_ADC_SC1n_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_SC1n bitfields + */ + +/*! + * @name Register ADC_SC1n, field ADCH[4:0] (RW) + * + * Selects one of the input channels. The input channel decode depends on the + * value of DIFF. DAD0-DAD3 are associated with the input pin pairs DADPx and + * DADMx. Some of the input channel options in the bitfield-setting descriptions might + * not be available for your device. For the actual ADC channel assignments for + * your device, see the Chip Configuration details. The successive approximation + * converter subsystem is turned off when the channel select bits are all set, + * that is, ADCH = 11111. This feature allows explicit disabling of the ADC and + * isolation of the input channel from all sources. Terminating continuous + * conversions this way prevents an additional single conversion from being performed. It + * is not necessary to set ADCH to all 1s to place the ADC in a low-power state + * when continuous conversions are not enabled because the module automatically + * enters a low-power state when a conversion completes. + * + * Values: + * - 00000 - When DIFF=0, DADP0 is selected as input; when DIFF=1, DAD0 is + * selected as input. + * - 00001 - When DIFF=0, DADP1 is selected as input; when DIFF=1, DAD1 is + * selected as input. + * - 00010 - When DIFF=0, DADP2 is selected as input; when DIFF=1, DAD2 is + * selected as input. + * - 00011 - When DIFF=0, DADP3 is selected as input; when DIFF=1, DAD3 is + * selected as input. + * - 00100 - When DIFF=0, AD4 is selected as input; when DIFF=1, it is reserved. + * - 00101 - When DIFF=0, AD5 is selected as input; when DIFF=1, it is reserved. + * - 00110 - When DIFF=0, AD6 is selected as input; when DIFF=1, it is reserved. + * - 00111 - When DIFF=0, AD7 is selected as input; when DIFF=1, it is reserved. + * - 01000 - When DIFF=0, AD8 is selected as input; when DIFF=1, it is reserved. + * - 01001 - When DIFF=0, AD9 is selected as input; when DIFF=1, it is reserved. + * - 01010 - When DIFF=0, AD10 is selected as input; when DIFF=1, it is reserved. + * - 01011 - When DIFF=0, AD11 is selected as input; when DIFF=1, it is reserved. + * - 01100 - When DIFF=0, AD12 is selected as input; when DIFF=1, it is reserved. + * - 01101 - When DIFF=0, AD13 is selected as input; when DIFF=1, it is reserved. + * - 01110 - When DIFF=0, AD14 is selected as input; when DIFF=1, it is reserved. + * - 01111 - When DIFF=0, AD15 is selected as input; when DIFF=1, it is reserved. + * - 10000 - When DIFF=0, AD16 is selected as input; when DIFF=1, it is reserved. + * - 10001 - When DIFF=0, AD17 is selected as input; when DIFF=1, it is reserved. + * - 10010 - When DIFF=0, AD18 is selected as input; when DIFF=1, it is reserved. + * - 10011 - When DIFF=0, AD19 is selected as input; when DIFF=1, it is reserved. + * - 10100 - When DIFF=0, AD20 is selected as input; when DIFF=1, it is reserved. + * - 10101 - When DIFF=0, AD21 is selected as input; when DIFF=1, it is reserved. + * - 10110 - When DIFF=0, AD22 is selected as input; when DIFF=1, it is reserved. + * - 10111 - When DIFF=0, AD23 is selected as input; when DIFF=1, it is reserved. + * - 11000 - Reserved. + * - 11001 - Reserved. + * - 11010 - When DIFF=0, Temp Sensor (single-ended) is selected as input; when + * DIFF=1, Temp Sensor (differential) is selected as input. + * - 11011 - When DIFF=0, Bandgap (single-ended) is selected as input; when + * DIFF=1, Bandgap (differential) is selected as input. + * - 11100 - Reserved. + * - 11101 - When DIFF=0,VREFSH is selected as input; when DIFF=1, -VREFSH + * (differential) is selected as input. Voltage reference selected is determined + * by SC2[REFSEL]. + * - 11110 - When DIFF=0,VREFSL is selected as input; when DIFF=1, it is + * reserved. Voltage reference selected is determined by SC2[REFSEL]. + * - 11111 - Module is disabled. + */ +/*@{*/ +#define BP_ADC_SC1n_ADCH (0U) /*!< Bit position for ADC_SC1n_ADCH. */ +#define BM_ADC_SC1n_ADCH (0x0000001FU) /*!< Bit mask for ADC_SC1n_ADCH. */ +#define BS_ADC_SC1n_ADCH (5U) /*!< Bit field size in bits for ADC_SC1n_ADCH. */ + +/*! @brief Read current value of the ADC_SC1n_ADCH field. */ +#define BR_ADC_SC1n_ADCH(x, n) (HW_ADC_SC1n(x, n).B.ADCH) + +/*! @brief Format value for bitfield ADC_SC1n_ADCH. */ +#define BF_ADC_SC1n_ADCH(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC1n_ADCH) & BM_ADC_SC1n_ADCH) + +/*! @brief Set the ADCH field to a new value. */ +#define BW_ADC_SC1n_ADCH(x, n, v) (HW_ADC_SC1n_WR(x, n, (HW_ADC_SC1n_RD(x, n) & ~BM_ADC_SC1n_ADCH) | BF_ADC_SC1n_ADCH(v))) +/*@}*/ + +/*! + * @name Register ADC_SC1n, field DIFF[5] (RW) + * + * Configures the ADC to operate in differential mode. When enabled, this mode + * automatically selects from the differential channels, and changes the + * conversion algorithm and the number of cycles to complete a conversion. + * + * Values: + * - 0 - Single-ended conversions and input channels are selected. + * - 1 - Differential conversions and input channels are selected. + */ +/*@{*/ +#define BP_ADC_SC1n_DIFF (5U) /*!< Bit position for ADC_SC1n_DIFF. */ +#define BM_ADC_SC1n_DIFF (0x00000020U) /*!< Bit mask for ADC_SC1n_DIFF. */ +#define BS_ADC_SC1n_DIFF (1U) /*!< Bit field size in bits for ADC_SC1n_DIFF. */ + +/*! @brief Read current value of the ADC_SC1n_DIFF field. */ +#define BR_ADC_SC1n_DIFF(x, n) (BITBAND_ACCESS32(HW_ADC_SC1n_ADDR(x, n), BP_ADC_SC1n_DIFF)) + +/*! @brief Format value for bitfield ADC_SC1n_DIFF. */ +#define BF_ADC_SC1n_DIFF(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC1n_DIFF) & BM_ADC_SC1n_DIFF) + +/*! @brief Set the DIFF field to a new value. */ +#define BW_ADC_SC1n_DIFF(x, n, v) (BITBAND_ACCESS32(HW_ADC_SC1n_ADDR(x, n), BP_ADC_SC1n_DIFF) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC1n, field AIEN[6] (RW) + * + * Enables conversion complete interrupts. When COCO becomes set while the + * respective AIEN is high, an interrupt is asserted. + * + * Values: + * - 0 - Conversion complete interrupt is disabled. + * - 1 - Conversion complete interrupt is enabled. + */ +/*@{*/ +#define BP_ADC_SC1n_AIEN (6U) /*!< Bit position for ADC_SC1n_AIEN. */ +#define BM_ADC_SC1n_AIEN (0x00000040U) /*!< Bit mask for ADC_SC1n_AIEN. */ +#define BS_ADC_SC1n_AIEN (1U) /*!< Bit field size in bits for ADC_SC1n_AIEN. */ + +/*! @brief Read current value of the ADC_SC1n_AIEN field. */ +#define BR_ADC_SC1n_AIEN(x, n) (BITBAND_ACCESS32(HW_ADC_SC1n_ADDR(x, n), BP_ADC_SC1n_AIEN)) + +/*! @brief Format value for bitfield ADC_SC1n_AIEN. */ +#define BF_ADC_SC1n_AIEN(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC1n_AIEN) & BM_ADC_SC1n_AIEN) + +/*! @brief Set the AIEN field to a new value. */ +#define BW_ADC_SC1n_AIEN(x, n, v) (BITBAND_ACCESS32(HW_ADC_SC1n_ADDR(x, n), BP_ADC_SC1n_AIEN) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC1n, field COCO[7] (RO) + * + * This is a read-only field that is set each time a conversion is completed + * when the compare function is disabled, or SC2[ACFE]=0 and the hardware average + * function is disabled, or SC3[AVGE]=0. When the compare function is enabled, or + * SC2[ACFE]=1, COCO is set upon completion of a conversion only if the compare + * result is true. When the hardware average function is enabled, or SC3[AVGE]=1, + * COCO is set upon completion of the selected number of conversions (determined + * by AVGS). COCO in SC1A is also set at the completion of a calibration sequence. + * COCO is cleared when the respective SC1n register is written or when the + * respective Rn register is read. + * + * Values: + * - 0 - Conversion is not completed. + * - 1 - Conversion is completed. + */ +/*@{*/ +#define BP_ADC_SC1n_COCO (7U) /*!< Bit position for ADC_SC1n_COCO. */ +#define BM_ADC_SC1n_COCO (0x00000080U) /*!< Bit mask for ADC_SC1n_COCO. */ +#define BS_ADC_SC1n_COCO (1U) /*!< Bit field size in bits for ADC_SC1n_COCO. */ + +/*! @brief Read current value of the ADC_SC1n_COCO field. */ +#define BR_ADC_SC1n_COCO(x, n) (BITBAND_ACCESS32(HW_ADC_SC1n_ADDR(x, n), BP_ADC_SC1n_COCO)) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CFG1 - ADC Configuration Register 1 + ******************************************************************************/ + +/*! + * @brief HW_ADC_CFG1 - ADC Configuration Register 1 (RW) + * + * Reset value: 0x00000000U + * + * The configuration Register 1 (CFG1) selects the mode of operation, clock + * source, clock divide, and configuration for low power or long sample time. + */ +typedef union _hw_adc_cfg1 +{ + uint32_t U; + struct _hw_adc_cfg1_bitfields + { + uint32_t ADICLK : 2; /*!< [1:0] Input Clock Select */ + uint32_t MODE : 2; /*!< [3:2] Conversion mode selection */ + uint32_t ADLSMP : 1; /*!< [4] Sample Time Configuration */ + uint32_t ADIV : 2; /*!< [6:5] Clock Divide Select */ + uint32_t ADLPC : 1; /*!< [7] Low-Power Configuration */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_adc_cfg1_t; + +/*! + * @name Constants and macros for entire ADC_CFG1 register + */ +/*@{*/ +#define HW_ADC_CFG1_ADDR(x) ((x) + 0x8U) + +#define HW_ADC_CFG1(x) (*(__IO hw_adc_cfg1_t *) HW_ADC_CFG1_ADDR(x)) +#define HW_ADC_CFG1_RD(x) (HW_ADC_CFG1(x).U) +#define HW_ADC_CFG1_WR(x, v) (HW_ADC_CFG1(x).U = (v)) +#define HW_ADC_CFG1_SET(x, v) (HW_ADC_CFG1_WR(x, HW_ADC_CFG1_RD(x) | (v))) +#define HW_ADC_CFG1_CLR(x, v) (HW_ADC_CFG1_WR(x, HW_ADC_CFG1_RD(x) & ~(v))) +#define HW_ADC_CFG1_TOG(x, v) (HW_ADC_CFG1_WR(x, HW_ADC_CFG1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CFG1 bitfields + */ + +/*! + * @name Register ADC_CFG1, field ADICLK[1:0] (RW) + * + * Selects the input clock source to generate the internal clock, ADCK. Note + * that when the ADACK clock source is selected, it is not required to be active + * prior to conversion start. When it is selected and it is not active prior to a + * conversion start, when CFG2[ADACKEN]=0, the asynchronous clock is activated at + * the start of a conversion and deactivated when conversions are terminated. In + * this case, there is an associated clock startup delay each time the clock + * source is re-activated. + * + * Values: + * - 00 - Bus clock + * - 01 - Alternate clock 2 (ALTCLK2) + * - 10 - Alternate clock (ALTCLK) + * - 11 - Asynchronous clock (ADACK) + */ +/*@{*/ +#define BP_ADC_CFG1_ADICLK (0U) /*!< Bit position for ADC_CFG1_ADICLK. */ +#define BM_ADC_CFG1_ADICLK (0x00000003U) /*!< Bit mask for ADC_CFG1_ADICLK. */ +#define BS_ADC_CFG1_ADICLK (2U) /*!< Bit field size in bits for ADC_CFG1_ADICLK. */ + +/*! @brief Read current value of the ADC_CFG1_ADICLK field. */ +#define BR_ADC_CFG1_ADICLK(x) (HW_ADC_CFG1(x).B.ADICLK) + +/*! @brief Format value for bitfield ADC_CFG1_ADICLK. */ +#define BF_ADC_CFG1_ADICLK(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG1_ADICLK) & BM_ADC_CFG1_ADICLK) + +/*! @brief Set the ADICLK field to a new value. */ +#define BW_ADC_CFG1_ADICLK(x, v) (HW_ADC_CFG1_WR(x, (HW_ADC_CFG1_RD(x) & ~BM_ADC_CFG1_ADICLK) | BF_ADC_CFG1_ADICLK(v))) +/*@}*/ + +/*! + * @name Register ADC_CFG1, field MODE[3:2] (RW) + * + * Selects the ADC resolution mode. + * + * Values: + * - 00 - When DIFF=0:It is single-ended 8-bit conversion; when DIFF=1, it is + * differential 9-bit conversion with 2's complement output. + * - 01 - When DIFF=0:It is single-ended 12-bit conversion ; when DIFF=1, it is + * differential 13-bit conversion with 2's complement output. + * - 10 - When DIFF=0:It is single-ended 10-bit conversion. ; when DIFF=1, it is + * differential 11-bit conversion with 2's complement output + * - 11 - When DIFF=0:It is single-ended 16-bit conversion..; when DIFF=1, it is + * differential 16-bit conversion with 2's complement output + */ +/*@{*/ +#define BP_ADC_CFG1_MODE (2U) /*!< Bit position for ADC_CFG1_MODE. */ +#define BM_ADC_CFG1_MODE (0x0000000CU) /*!< Bit mask for ADC_CFG1_MODE. */ +#define BS_ADC_CFG1_MODE (2U) /*!< Bit field size in bits for ADC_CFG1_MODE. */ + +/*! @brief Read current value of the ADC_CFG1_MODE field. */ +#define BR_ADC_CFG1_MODE(x) (HW_ADC_CFG1(x).B.MODE) + +/*! @brief Format value for bitfield ADC_CFG1_MODE. */ +#define BF_ADC_CFG1_MODE(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG1_MODE) & BM_ADC_CFG1_MODE) + +/*! @brief Set the MODE field to a new value. */ +#define BW_ADC_CFG1_MODE(x, v) (HW_ADC_CFG1_WR(x, (HW_ADC_CFG1_RD(x) & ~BM_ADC_CFG1_MODE) | BF_ADC_CFG1_MODE(v))) +/*@}*/ + +/*! + * @name Register ADC_CFG1, field ADLSMP[4] (RW) + * + * Selects between different sample times based on the conversion mode selected. + * This field adjusts the sample period to allow higher impedance inputs to be + * accurately sampled or to maximize conversion speed for lower impedance inputs. + * Longer sample times can also be used to lower overall power consumption if + * continuous conversions are enabled and high conversion rates are not required. + * When ADLSMP=1, the long sample time select bits, (ADLSTS[1:0]), can select the + * extent of the long sample time. + * + * Values: + * - 0 - Short sample time. + * - 1 - Long sample time. + */ +/*@{*/ +#define BP_ADC_CFG1_ADLSMP (4U) /*!< Bit position for ADC_CFG1_ADLSMP. */ +#define BM_ADC_CFG1_ADLSMP (0x00000010U) /*!< Bit mask for ADC_CFG1_ADLSMP. */ +#define BS_ADC_CFG1_ADLSMP (1U) /*!< Bit field size in bits for ADC_CFG1_ADLSMP. */ + +/*! @brief Read current value of the ADC_CFG1_ADLSMP field. */ +#define BR_ADC_CFG1_ADLSMP(x) (BITBAND_ACCESS32(HW_ADC_CFG1_ADDR(x), BP_ADC_CFG1_ADLSMP)) + +/*! @brief Format value for bitfield ADC_CFG1_ADLSMP. */ +#define BF_ADC_CFG1_ADLSMP(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG1_ADLSMP) & BM_ADC_CFG1_ADLSMP) + +/*! @brief Set the ADLSMP field to a new value. */ +#define BW_ADC_CFG1_ADLSMP(x, v) (BITBAND_ACCESS32(HW_ADC_CFG1_ADDR(x), BP_ADC_CFG1_ADLSMP) = (v)) +/*@}*/ + +/*! + * @name Register ADC_CFG1, field ADIV[6:5] (RW) + * + * Selects the divide ratio used by the ADC to generate the internal clock ADCK. + * + * Values: + * - 00 - The divide ratio is 1 and the clock rate is input clock. + * - 01 - The divide ratio is 2 and the clock rate is (input clock)/2. + * - 10 - The divide ratio is 4 and the clock rate is (input clock)/4. + * - 11 - The divide ratio is 8 and the clock rate is (input clock)/8. + */ +/*@{*/ +#define BP_ADC_CFG1_ADIV (5U) /*!< Bit position for ADC_CFG1_ADIV. */ +#define BM_ADC_CFG1_ADIV (0x00000060U) /*!< Bit mask for ADC_CFG1_ADIV. */ +#define BS_ADC_CFG1_ADIV (2U) /*!< Bit field size in bits for ADC_CFG1_ADIV. */ + +/*! @brief Read current value of the ADC_CFG1_ADIV field. */ +#define BR_ADC_CFG1_ADIV(x) (HW_ADC_CFG1(x).B.ADIV) + +/*! @brief Format value for bitfield ADC_CFG1_ADIV. */ +#define BF_ADC_CFG1_ADIV(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG1_ADIV) & BM_ADC_CFG1_ADIV) + +/*! @brief Set the ADIV field to a new value. */ +#define BW_ADC_CFG1_ADIV(x, v) (HW_ADC_CFG1_WR(x, (HW_ADC_CFG1_RD(x) & ~BM_ADC_CFG1_ADIV) | BF_ADC_CFG1_ADIV(v))) +/*@}*/ + +/*! + * @name Register ADC_CFG1, field ADLPC[7] (RW) + * + * Controls the power configuration of the successive approximation converter. + * This optimizes power consumption when higher sample rates are not required. + * + * Values: + * - 0 - Normal power configuration. + * - 1 - Low-power configuration. The power is reduced at the expense of maximum + * clock speed. + */ +/*@{*/ +#define BP_ADC_CFG1_ADLPC (7U) /*!< Bit position for ADC_CFG1_ADLPC. */ +#define BM_ADC_CFG1_ADLPC (0x00000080U) /*!< Bit mask for ADC_CFG1_ADLPC. */ +#define BS_ADC_CFG1_ADLPC (1U) /*!< Bit field size in bits for ADC_CFG1_ADLPC. */ + +/*! @brief Read current value of the ADC_CFG1_ADLPC field. */ +#define BR_ADC_CFG1_ADLPC(x) (BITBAND_ACCESS32(HW_ADC_CFG1_ADDR(x), BP_ADC_CFG1_ADLPC)) + +/*! @brief Format value for bitfield ADC_CFG1_ADLPC. */ +#define BF_ADC_CFG1_ADLPC(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG1_ADLPC) & BM_ADC_CFG1_ADLPC) + +/*! @brief Set the ADLPC field to a new value. */ +#define BW_ADC_CFG1_ADLPC(x, v) (BITBAND_ACCESS32(HW_ADC_CFG1_ADDR(x), BP_ADC_CFG1_ADLPC) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CFG2 - ADC Configuration Register 2 + ******************************************************************************/ + +/*! + * @brief HW_ADC_CFG2 - ADC Configuration Register 2 (RW) + * + * Reset value: 0x00000000U + * + * Configuration Register 2 (CFG2) selects the special high-speed configuration + * for very high speed conversions and selects the long sample time duration + * during long sample mode. + */ +typedef union _hw_adc_cfg2 +{ + uint32_t U; + struct _hw_adc_cfg2_bitfields + { + uint32_t ADLSTS : 2; /*!< [1:0] Long Sample Time Select */ + uint32_t ADHSC : 1; /*!< [2] High-Speed Configuration */ + uint32_t ADACKEN : 1; /*!< [3] Asynchronous Clock Output Enable */ + uint32_t MUXSEL : 1; /*!< [4] ADC Mux Select */ + uint32_t RESERVED0 : 27; /*!< [31:5] */ + } B; +} hw_adc_cfg2_t; + +/*! + * @name Constants and macros for entire ADC_CFG2 register + */ +/*@{*/ +#define HW_ADC_CFG2_ADDR(x) ((x) + 0xCU) + +#define HW_ADC_CFG2(x) (*(__IO hw_adc_cfg2_t *) HW_ADC_CFG2_ADDR(x)) +#define HW_ADC_CFG2_RD(x) (HW_ADC_CFG2(x).U) +#define HW_ADC_CFG2_WR(x, v) (HW_ADC_CFG2(x).U = (v)) +#define HW_ADC_CFG2_SET(x, v) (HW_ADC_CFG2_WR(x, HW_ADC_CFG2_RD(x) | (v))) +#define HW_ADC_CFG2_CLR(x, v) (HW_ADC_CFG2_WR(x, HW_ADC_CFG2_RD(x) & ~(v))) +#define HW_ADC_CFG2_TOG(x, v) (HW_ADC_CFG2_WR(x, HW_ADC_CFG2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CFG2 bitfields + */ + +/*! + * @name Register ADC_CFG2, field ADLSTS[1:0] (RW) + * + * Selects between the extended sample times when long sample time is selected, + * that is, when CFG1[ADLSMP]=1. This allows higher impedance inputs to be + * accurately sampled or to maximize conversion speed for lower impedance inputs. + * Longer sample times can also be used to lower overall power consumption when + * continuous conversions are enabled if high conversion rates are not required. + * + * Values: + * - 00 - Default longest sample time; 20 extra ADCK cycles; 24 ADCK cycles + * total. + * - 01 - 12 extra ADCK cycles; 16 ADCK cycles total sample time. + * - 10 - 6 extra ADCK cycles; 10 ADCK cycles total sample time. + * - 11 - 2 extra ADCK cycles; 6 ADCK cycles total sample time. + */ +/*@{*/ +#define BP_ADC_CFG2_ADLSTS (0U) /*!< Bit position for ADC_CFG2_ADLSTS. */ +#define BM_ADC_CFG2_ADLSTS (0x00000003U) /*!< Bit mask for ADC_CFG2_ADLSTS. */ +#define BS_ADC_CFG2_ADLSTS (2U) /*!< Bit field size in bits for ADC_CFG2_ADLSTS. */ + +/*! @brief Read current value of the ADC_CFG2_ADLSTS field. */ +#define BR_ADC_CFG2_ADLSTS(x) (HW_ADC_CFG2(x).B.ADLSTS) + +/*! @brief Format value for bitfield ADC_CFG2_ADLSTS. */ +#define BF_ADC_CFG2_ADLSTS(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG2_ADLSTS) & BM_ADC_CFG2_ADLSTS) + +/*! @brief Set the ADLSTS field to a new value. */ +#define BW_ADC_CFG2_ADLSTS(x, v) (HW_ADC_CFG2_WR(x, (HW_ADC_CFG2_RD(x) & ~BM_ADC_CFG2_ADLSTS) | BF_ADC_CFG2_ADLSTS(v))) +/*@}*/ + +/*! + * @name Register ADC_CFG2, field ADHSC[2] (RW) + * + * Configures the ADC for very high-speed operation. The conversion sequence is + * altered with 2 ADCK cycles added to the conversion time to allow higher speed + * conversion clocks. + * + * Values: + * - 0 - Normal conversion sequence selected. + * - 1 - High-speed conversion sequence selected with 2 additional ADCK cycles + * to total conversion time. + */ +/*@{*/ +#define BP_ADC_CFG2_ADHSC (2U) /*!< Bit position for ADC_CFG2_ADHSC. */ +#define BM_ADC_CFG2_ADHSC (0x00000004U) /*!< Bit mask for ADC_CFG2_ADHSC. */ +#define BS_ADC_CFG2_ADHSC (1U) /*!< Bit field size in bits for ADC_CFG2_ADHSC. */ + +/*! @brief Read current value of the ADC_CFG2_ADHSC field. */ +#define BR_ADC_CFG2_ADHSC(x) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_ADHSC)) + +/*! @brief Format value for bitfield ADC_CFG2_ADHSC. */ +#define BF_ADC_CFG2_ADHSC(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG2_ADHSC) & BM_ADC_CFG2_ADHSC) + +/*! @brief Set the ADHSC field to a new value. */ +#define BW_ADC_CFG2_ADHSC(x, v) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_ADHSC) = (v)) +/*@}*/ + +/*! + * @name Register ADC_CFG2, field ADACKEN[3] (RW) + * + * Enables the asynchronous clock source and the clock source output regardless + * of the conversion and status of CFG1[ADICLK]. Based on MCU configuration, the + * asynchronous clock may be used by other modules. See chip configuration + * information. Setting this field allows the clock to be used even while the ADC is + * idle or operating from a different clock source. Also, latency of initiating a + * single or first-continuous conversion with the asynchronous clock selected is + * reduced because the ADACK clock is already operational. + * + * Values: + * - 0 - Asynchronous clock output disabled; Asynchronous clock is enabled only + * if selected by ADICLK and a conversion is active. + * - 1 - Asynchronous clock and clock output is enabled regardless of the state + * of the ADC. + */ +/*@{*/ +#define BP_ADC_CFG2_ADACKEN (3U) /*!< Bit position for ADC_CFG2_ADACKEN. */ +#define BM_ADC_CFG2_ADACKEN (0x00000008U) /*!< Bit mask for ADC_CFG2_ADACKEN. */ +#define BS_ADC_CFG2_ADACKEN (1U) /*!< Bit field size in bits for ADC_CFG2_ADACKEN. */ + +/*! @brief Read current value of the ADC_CFG2_ADACKEN field. */ +#define BR_ADC_CFG2_ADACKEN(x) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_ADACKEN)) + +/*! @brief Format value for bitfield ADC_CFG2_ADACKEN. */ +#define BF_ADC_CFG2_ADACKEN(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG2_ADACKEN) & BM_ADC_CFG2_ADACKEN) + +/*! @brief Set the ADACKEN field to a new value. */ +#define BW_ADC_CFG2_ADACKEN(x, v) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_ADACKEN) = (v)) +/*@}*/ + +/*! + * @name Register ADC_CFG2, field MUXSEL[4] (RW) + * + * Changes the ADC mux setting to select between alternate sets of ADC channels. + * + * Values: + * - 0 - ADxxa channels are selected. + * - 1 - ADxxb channels are selected. + */ +/*@{*/ +#define BP_ADC_CFG2_MUXSEL (4U) /*!< Bit position for ADC_CFG2_MUXSEL. */ +#define BM_ADC_CFG2_MUXSEL (0x00000010U) /*!< Bit mask for ADC_CFG2_MUXSEL. */ +#define BS_ADC_CFG2_MUXSEL (1U) /*!< Bit field size in bits for ADC_CFG2_MUXSEL. */ + +/*! @brief Read current value of the ADC_CFG2_MUXSEL field. */ +#define BR_ADC_CFG2_MUXSEL(x) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_MUXSEL)) + +/*! @brief Format value for bitfield ADC_CFG2_MUXSEL. */ +#define BF_ADC_CFG2_MUXSEL(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CFG2_MUXSEL) & BM_ADC_CFG2_MUXSEL) + +/*! @brief Set the MUXSEL field to a new value. */ +#define BW_ADC_CFG2_MUXSEL(x, v) (BITBAND_ACCESS32(HW_ADC_CFG2_ADDR(x), BP_ADC_CFG2_MUXSEL) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_ADC_Rn - ADC Data Result Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_Rn - ADC Data Result Register (RO) + * + * Reset value: 0x00000000U + * + * The data result registers (Rn) contain the result of an ADC conversion of the + * channel selected by the corresponding status and channel control register + * (SC1A:SC1n). For every status and channel control register, there is a + * corresponding data result register. Unused bits in R n are cleared in unsigned + * right-aligned modes and carry the sign bit (MSB) in sign-extended 2's complement modes. + * For example, when configured for 10-bit single-ended mode, D[15:10] are + * cleared. When configured for 11-bit differential mode, D[15:10] carry the sign bit, + * that is, bit 10 extended through bit 15. The following table describes the + * behavior of the data result registers in the different modes of operation. Data + * result register description Conversion mode D15 D14 D13 D12 D11 D10 D9 D8 D7 + * D6 D5 D4 D3 D2 D1 D0 Format 16-bit differential S D D D D D D D D D D D D D D D + * Signed 2's complement 16-bit single-ended D D D D D D D D D D D D D D D D + * Unsigned right justified 13-bit differential S S S S D D D D D D D D D D D D + * Sign-extended 2's complement 12-bit single-ended 0 0 0 0 D D D D D D D D D D D D + * Unsigned right-justified 11-bit differential S S S S S S D D D D D D D D D D + * Sign-extended 2's complement 10-bit single-ended 0 0 0 0 0 0 D D D D D D D D D D + * Unsigned right-justified 9-bit differential S S S S S S S S D D D D D D D D + * Sign-extended 2's complement 8-bit single-ended 0 0 0 0 0 0 0 0 D D D D D D D D + * Unsigned right-justified S: Sign bit or sign bit extension; D: Data, which is + * 2's complement data if indicated + */ +typedef union _hw_adc_rn +{ + uint32_t U; + struct _hw_adc_rn_bitfields + { + uint32_t D : 16; /*!< [15:0] Data result */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_rn_t; + +/*! + * @name Constants and macros for entire ADC_Rn register + */ +/*@{*/ +#define HW_ADC_Rn_COUNT (2U) + +#define HW_ADC_Rn_ADDR(x, n) ((x) + 0x10U + (0x4U * (n))) + +#define HW_ADC_Rn(x, n) (*(__I hw_adc_rn_t *) HW_ADC_Rn_ADDR(x, n)) +#define HW_ADC_Rn_RD(x, n) (HW_ADC_Rn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual ADC_Rn bitfields + */ + +/*! + * @name Register ADC_Rn, field D[15:0] (RO) + */ +/*@{*/ +#define BP_ADC_Rn_D (0U) /*!< Bit position for ADC_Rn_D. */ +#define BM_ADC_Rn_D (0x0000FFFFU) /*!< Bit mask for ADC_Rn_D. */ +#define BS_ADC_Rn_D (16U) /*!< Bit field size in bits for ADC_Rn_D. */ + +/*! @brief Read current value of the ADC_Rn_D field. */ +#define BR_ADC_Rn_D(x, n) (HW_ADC_Rn(x, n).B.D) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CV1 - Compare Value Registers + ******************************************************************************/ + +/*! + * @brief HW_ADC_CV1 - Compare Value Registers (RW) + * + * Reset value: 0x00000000U + * + * The Compare Value Registers (CV1 and CV2) contain a compare value used to + * compare the conversion result when the compare function is enabled, that is, + * SC2[ACFE]=1. This register is formatted in the same way as the Rn registers in + * different modes of operation for both bit position definition and value format + * using unsigned or sign-extended 2's complement. Therefore, the compare function + * uses only the CVn fields that are related to the ADC mode of operation. The + * compare value 2 register (CV2) is used only when the compare range function is + * enabled, that is, SC2[ACREN]=1. + */ +typedef union _hw_adc_cv1 +{ + uint32_t U; + struct _hw_adc_cv1_bitfields + { + uint32_t CV : 16; /*!< [15:0] Compare Value. */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_cv1_t; + +/*! + * @name Constants and macros for entire ADC_CV1 register + */ +/*@{*/ +#define HW_ADC_CV1_ADDR(x) ((x) + 0x18U) + +#define HW_ADC_CV1(x) (*(__IO hw_adc_cv1_t *) HW_ADC_CV1_ADDR(x)) +#define HW_ADC_CV1_RD(x) (HW_ADC_CV1(x).U) +#define HW_ADC_CV1_WR(x, v) (HW_ADC_CV1(x).U = (v)) +#define HW_ADC_CV1_SET(x, v) (HW_ADC_CV1_WR(x, HW_ADC_CV1_RD(x) | (v))) +#define HW_ADC_CV1_CLR(x, v) (HW_ADC_CV1_WR(x, HW_ADC_CV1_RD(x) & ~(v))) +#define HW_ADC_CV1_TOG(x, v) (HW_ADC_CV1_WR(x, HW_ADC_CV1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CV1 bitfields + */ + +/*! + * @name Register ADC_CV1, field CV[15:0] (RW) + */ +/*@{*/ +#define BP_ADC_CV1_CV (0U) /*!< Bit position for ADC_CV1_CV. */ +#define BM_ADC_CV1_CV (0x0000FFFFU) /*!< Bit mask for ADC_CV1_CV. */ +#define BS_ADC_CV1_CV (16U) /*!< Bit field size in bits for ADC_CV1_CV. */ + +/*! @brief Read current value of the ADC_CV1_CV field. */ +#define BR_ADC_CV1_CV(x) (HW_ADC_CV1(x).B.CV) + +/*! @brief Format value for bitfield ADC_CV1_CV. */ +#define BF_ADC_CV1_CV(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CV1_CV) & BM_ADC_CV1_CV) + +/*! @brief Set the CV field to a new value. */ +#define BW_ADC_CV1_CV(x, v) (HW_ADC_CV1_WR(x, (HW_ADC_CV1_RD(x) & ~BM_ADC_CV1_CV) | BF_ADC_CV1_CV(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CV2 - Compare Value Registers + ******************************************************************************/ + +/*! + * @brief HW_ADC_CV2 - Compare Value Registers (RW) + * + * Reset value: 0x00000000U + * + * The Compare Value Registers (CV1 and CV2) contain a compare value used to + * compare the conversion result when the compare function is enabled, that is, + * SC2[ACFE]=1. This register is formatted in the same way as the Rn registers in + * different modes of operation for both bit position definition and value format + * using unsigned or sign-extended 2's complement. Therefore, the compare function + * uses only the CVn fields that are related to the ADC mode of operation. The + * compare value 2 register (CV2) is used only when the compare range function is + * enabled, that is, SC2[ACREN]=1. + */ +typedef union _hw_adc_cv2 +{ + uint32_t U; + struct _hw_adc_cv2_bitfields + { + uint32_t CV : 16; /*!< [15:0] Compare Value. */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_cv2_t; + +/*! + * @name Constants and macros for entire ADC_CV2 register + */ +/*@{*/ +#define HW_ADC_CV2_ADDR(x) ((x) + 0x1CU) + +#define HW_ADC_CV2(x) (*(__IO hw_adc_cv2_t *) HW_ADC_CV2_ADDR(x)) +#define HW_ADC_CV2_RD(x) (HW_ADC_CV2(x).U) +#define HW_ADC_CV2_WR(x, v) (HW_ADC_CV2(x).U = (v)) +#define HW_ADC_CV2_SET(x, v) (HW_ADC_CV2_WR(x, HW_ADC_CV2_RD(x) | (v))) +#define HW_ADC_CV2_CLR(x, v) (HW_ADC_CV2_WR(x, HW_ADC_CV2_RD(x) & ~(v))) +#define HW_ADC_CV2_TOG(x, v) (HW_ADC_CV2_WR(x, HW_ADC_CV2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CV2 bitfields + */ + +/*! + * @name Register ADC_CV2, field CV[15:0] (RW) + */ +/*@{*/ +#define BP_ADC_CV2_CV (0U) /*!< Bit position for ADC_CV2_CV. */ +#define BM_ADC_CV2_CV (0x0000FFFFU) /*!< Bit mask for ADC_CV2_CV. */ +#define BS_ADC_CV2_CV (16U) /*!< Bit field size in bits for ADC_CV2_CV. */ + +/*! @brief Read current value of the ADC_CV2_CV field. */ +#define BR_ADC_CV2_CV(x) (HW_ADC_CV2(x).B.CV) + +/*! @brief Format value for bitfield ADC_CV2_CV. */ +#define BF_ADC_CV2_CV(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CV2_CV) & BM_ADC_CV2_CV) + +/*! @brief Set the CV field to a new value. */ +#define BW_ADC_CV2_CV(x, v) (HW_ADC_CV2_WR(x, (HW_ADC_CV2_RD(x) & ~BM_ADC_CV2_CV) | BF_ADC_CV2_CV(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_SC2 - Status and Control Register 2 + ******************************************************************************/ + +/*! + * @brief HW_ADC_SC2 - Status and Control Register 2 (RW) + * + * Reset value: 0x00000000U + * + * The status and control register 2 (SC2) contains the conversion active, + * hardware/software trigger select, compare function, and voltage reference select of + * the ADC module. + */ +typedef union _hw_adc_sc2 +{ + uint32_t U; + struct _hw_adc_sc2_bitfields + { + uint32_t REFSEL : 2; /*!< [1:0] Voltage Reference Selection */ + uint32_t DMAEN : 1; /*!< [2] DMA Enable */ + uint32_t ACREN : 1; /*!< [3] Compare Function Range Enable */ + uint32_t ACFGT : 1; /*!< [4] Compare Function Greater Than Enable */ + uint32_t ACFE : 1; /*!< [5] Compare Function Enable */ + uint32_t ADTRG : 1; /*!< [6] Conversion Trigger Select */ + uint32_t ADACT : 1; /*!< [7] Conversion Active */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_adc_sc2_t; + +/*! + * @name Constants and macros for entire ADC_SC2 register + */ +/*@{*/ +#define HW_ADC_SC2_ADDR(x) ((x) + 0x20U) + +#define HW_ADC_SC2(x) (*(__IO hw_adc_sc2_t *) HW_ADC_SC2_ADDR(x)) +#define HW_ADC_SC2_RD(x) (HW_ADC_SC2(x).U) +#define HW_ADC_SC2_WR(x, v) (HW_ADC_SC2(x).U = (v)) +#define HW_ADC_SC2_SET(x, v) (HW_ADC_SC2_WR(x, HW_ADC_SC2_RD(x) | (v))) +#define HW_ADC_SC2_CLR(x, v) (HW_ADC_SC2_WR(x, HW_ADC_SC2_RD(x) & ~(v))) +#define HW_ADC_SC2_TOG(x, v) (HW_ADC_SC2_WR(x, HW_ADC_SC2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_SC2 bitfields + */ + +/*! + * @name Register ADC_SC2, field REFSEL[1:0] (RW) + * + * Selects the voltage reference source used for conversions. + * + * Values: + * - 00 - Default voltage reference pin pair, that is, external pins VREFH and + * VREFL + * - 01 - Alternate reference pair, that is, VALTH and VALTL . This pair may be + * additional external pins or internal sources depending on the MCU + * configuration. See the chip configuration information for details specific to this + * MCU + * - 10 - Reserved + * - 11 - Reserved + */ +/*@{*/ +#define BP_ADC_SC2_REFSEL (0U) /*!< Bit position for ADC_SC2_REFSEL. */ +#define BM_ADC_SC2_REFSEL (0x00000003U) /*!< Bit mask for ADC_SC2_REFSEL. */ +#define BS_ADC_SC2_REFSEL (2U) /*!< Bit field size in bits for ADC_SC2_REFSEL. */ + +/*! @brief Read current value of the ADC_SC2_REFSEL field. */ +#define BR_ADC_SC2_REFSEL(x) (HW_ADC_SC2(x).B.REFSEL) + +/*! @brief Format value for bitfield ADC_SC2_REFSEL. */ +#define BF_ADC_SC2_REFSEL(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_REFSEL) & BM_ADC_SC2_REFSEL) + +/*! @brief Set the REFSEL field to a new value. */ +#define BW_ADC_SC2_REFSEL(x, v) (HW_ADC_SC2_WR(x, (HW_ADC_SC2_RD(x) & ~BM_ADC_SC2_REFSEL) | BF_ADC_SC2_REFSEL(v))) +/*@}*/ + +/*! + * @name Register ADC_SC2, field DMAEN[2] (RW) + * + * Values: + * - 0 - DMA is disabled. + * - 1 - DMA is enabled and will assert the ADC DMA request during an ADC + * conversion complete event noted when any of the SC1n[COCO] flags is asserted. + */ +/*@{*/ +#define BP_ADC_SC2_DMAEN (2U) /*!< Bit position for ADC_SC2_DMAEN. */ +#define BM_ADC_SC2_DMAEN (0x00000004U) /*!< Bit mask for ADC_SC2_DMAEN. */ +#define BS_ADC_SC2_DMAEN (1U) /*!< Bit field size in bits for ADC_SC2_DMAEN. */ + +/*! @brief Read current value of the ADC_SC2_DMAEN field. */ +#define BR_ADC_SC2_DMAEN(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_DMAEN)) + +/*! @brief Format value for bitfield ADC_SC2_DMAEN. */ +#define BF_ADC_SC2_DMAEN(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_DMAEN) & BM_ADC_SC2_DMAEN) + +/*! @brief Set the DMAEN field to a new value. */ +#define BW_ADC_SC2_DMAEN(x, v) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_DMAEN) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC2, field ACREN[3] (RW) + * + * Configures the compare function to check if the conversion result of the + * input being monitored is either between or outside the range formed by CV1 and CV2 + * determined by the value of ACFGT. ACFE must be set for ACFGT to have any + * effect. + * + * Values: + * - 0 - Range function disabled. Only CV1 is compared. + * - 1 - Range function enabled. Both CV1 and CV2 are compared. + */ +/*@{*/ +#define BP_ADC_SC2_ACREN (3U) /*!< Bit position for ADC_SC2_ACREN. */ +#define BM_ADC_SC2_ACREN (0x00000008U) /*!< Bit mask for ADC_SC2_ACREN. */ +#define BS_ADC_SC2_ACREN (1U) /*!< Bit field size in bits for ADC_SC2_ACREN. */ + +/*! @brief Read current value of the ADC_SC2_ACREN field. */ +#define BR_ADC_SC2_ACREN(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACREN)) + +/*! @brief Format value for bitfield ADC_SC2_ACREN. */ +#define BF_ADC_SC2_ACREN(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_ACREN) & BM_ADC_SC2_ACREN) + +/*! @brief Set the ACREN field to a new value. */ +#define BW_ADC_SC2_ACREN(x, v) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACREN) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC2, field ACFGT[4] (RW) + * + * Configures the compare function to check the conversion result relative to + * the CV1 and CV2 based upon the value of ACREN. ACFE must be set for ACFGT to + * have any effect. + * + * Values: + * - 0 - Configures less than threshold, outside range not inclusive and inside + * range not inclusive; functionality based on the values placed in CV1 and + * CV2. + * - 1 - Configures greater than or equal to threshold, outside and inside + * ranges inclusive; functionality based on the values placed in CV1 and CV2. + */ +/*@{*/ +#define BP_ADC_SC2_ACFGT (4U) /*!< Bit position for ADC_SC2_ACFGT. */ +#define BM_ADC_SC2_ACFGT (0x00000010U) /*!< Bit mask for ADC_SC2_ACFGT. */ +#define BS_ADC_SC2_ACFGT (1U) /*!< Bit field size in bits for ADC_SC2_ACFGT. */ + +/*! @brief Read current value of the ADC_SC2_ACFGT field. */ +#define BR_ADC_SC2_ACFGT(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACFGT)) + +/*! @brief Format value for bitfield ADC_SC2_ACFGT. */ +#define BF_ADC_SC2_ACFGT(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_ACFGT) & BM_ADC_SC2_ACFGT) + +/*! @brief Set the ACFGT field to a new value. */ +#define BW_ADC_SC2_ACFGT(x, v) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACFGT) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC2, field ACFE[5] (RW) + * + * Enables the compare function. + * + * Values: + * - 0 - Compare function disabled. + * - 1 - Compare function enabled. + */ +/*@{*/ +#define BP_ADC_SC2_ACFE (5U) /*!< Bit position for ADC_SC2_ACFE. */ +#define BM_ADC_SC2_ACFE (0x00000020U) /*!< Bit mask for ADC_SC2_ACFE. */ +#define BS_ADC_SC2_ACFE (1U) /*!< Bit field size in bits for ADC_SC2_ACFE. */ + +/*! @brief Read current value of the ADC_SC2_ACFE field. */ +#define BR_ADC_SC2_ACFE(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACFE)) + +/*! @brief Format value for bitfield ADC_SC2_ACFE. */ +#define BF_ADC_SC2_ACFE(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_ACFE) & BM_ADC_SC2_ACFE) + +/*! @brief Set the ACFE field to a new value. */ +#define BW_ADC_SC2_ACFE(x, v) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ACFE) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC2, field ADTRG[6] (RW) + * + * Selects the type of trigger used for initiating a conversion. Two types of + * trigger are selectable: Software trigger: When software trigger is selected, a + * conversion is initiated following a write to SC1A. Hardware trigger: When + * hardware trigger is selected, a conversion is initiated following the assertion of + * the ADHWT input after a pulse of the ADHWTSn input. + * + * Values: + * - 0 - Software trigger selected. + * - 1 - Hardware trigger selected. + */ +/*@{*/ +#define BP_ADC_SC2_ADTRG (6U) /*!< Bit position for ADC_SC2_ADTRG. */ +#define BM_ADC_SC2_ADTRG (0x00000040U) /*!< Bit mask for ADC_SC2_ADTRG. */ +#define BS_ADC_SC2_ADTRG (1U) /*!< Bit field size in bits for ADC_SC2_ADTRG. */ + +/*! @brief Read current value of the ADC_SC2_ADTRG field. */ +#define BR_ADC_SC2_ADTRG(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ADTRG)) + +/*! @brief Format value for bitfield ADC_SC2_ADTRG. */ +#define BF_ADC_SC2_ADTRG(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC2_ADTRG) & BM_ADC_SC2_ADTRG) + +/*! @brief Set the ADTRG field to a new value. */ +#define BW_ADC_SC2_ADTRG(x, v) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ADTRG) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC2, field ADACT[7] (RO) + * + * Indicates that a conversion or hardware averaging is in progress. ADACT is + * set when a conversion is initiated and cleared when a conversion is completed or + * aborted. + * + * Values: + * - 0 - Conversion not in progress. + * - 1 - Conversion in progress. + */ +/*@{*/ +#define BP_ADC_SC2_ADACT (7U) /*!< Bit position for ADC_SC2_ADACT. */ +#define BM_ADC_SC2_ADACT (0x00000080U) /*!< Bit mask for ADC_SC2_ADACT. */ +#define BS_ADC_SC2_ADACT (1U) /*!< Bit field size in bits for ADC_SC2_ADACT. */ + +/*! @brief Read current value of the ADC_SC2_ADACT field. */ +#define BR_ADC_SC2_ADACT(x) (BITBAND_ACCESS32(HW_ADC_SC2_ADDR(x), BP_ADC_SC2_ADACT)) +/*@}*/ + +/******************************************************************************* + * HW_ADC_SC3 - Status and Control Register 3 + ******************************************************************************/ + +/*! + * @brief HW_ADC_SC3 - Status and Control Register 3 (RW) + * + * Reset value: 0x00000000U + * + * The Status and Control Register 3 (SC3) controls the calibration, continuous + * convert, and hardware averaging functions of the ADC module. + */ +typedef union _hw_adc_sc3 +{ + uint32_t U; + struct _hw_adc_sc3_bitfields + { + uint32_t AVGS : 2; /*!< [1:0] Hardware Average Select */ + uint32_t AVGE : 1; /*!< [2] Hardware Average Enable */ + uint32_t ADCO : 1; /*!< [3] Continuous Conversion Enable */ + uint32_t RESERVED0 : 2; /*!< [5:4] */ + uint32_t CALF : 1; /*!< [6] Calibration Failed Flag */ + uint32_t CAL : 1; /*!< [7] Calibration */ + uint32_t RESERVED1 : 24; /*!< [31:8] */ + } B; +} hw_adc_sc3_t; + +/*! + * @name Constants and macros for entire ADC_SC3 register + */ +/*@{*/ +#define HW_ADC_SC3_ADDR(x) ((x) + 0x24U) + +#define HW_ADC_SC3(x) (*(__IO hw_adc_sc3_t *) HW_ADC_SC3_ADDR(x)) +#define HW_ADC_SC3_RD(x) (HW_ADC_SC3(x).U) +#define HW_ADC_SC3_WR(x, v) (HW_ADC_SC3(x).U = (v)) +#define HW_ADC_SC3_SET(x, v) (HW_ADC_SC3_WR(x, HW_ADC_SC3_RD(x) | (v))) +#define HW_ADC_SC3_CLR(x, v) (HW_ADC_SC3_WR(x, HW_ADC_SC3_RD(x) & ~(v))) +#define HW_ADC_SC3_TOG(x, v) (HW_ADC_SC3_WR(x, HW_ADC_SC3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_SC3 bitfields + */ + +/*! + * @name Register ADC_SC3, field AVGS[1:0] (RW) + * + * Determines how many ADC conversions will be averaged to create the ADC + * average result. + * + * Values: + * - 00 - 4 samples averaged. + * - 01 - 8 samples averaged. + * - 10 - 16 samples averaged. + * - 11 - 32 samples averaged. + */ +/*@{*/ +#define BP_ADC_SC3_AVGS (0U) /*!< Bit position for ADC_SC3_AVGS. */ +#define BM_ADC_SC3_AVGS (0x00000003U) /*!< Bit mask for ADC_SC3_AVGS. */ +#define BS_ADC_SC3_AVGS (2U) /*!< Bit field size in bits for ADC_SC3_AVGS. */ + +/*! @brief Read current value of the ADC_SC3_AVGS field. */ +#define BR_ADC_SC3_AVGS(x) (HW_ADC_SC3(x).B.AVGS) + +/*! @brief Format value for bitfield ADC_SC3_AVGS. */ +#define BF_ADC_SC3_AVGS(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC3_AVGS) & BM_ADC_SC3_AVGS) + +/*! @brief Set the AVGS field to a new value. */ +#define BW_ADC_SC3_AVGS(x, v) (HW_ADC_SC3_WR(x, (HW_ADC_SC3_RD(x) & ~BM_ADC_SC3_AVGS) | BF_ADC_SC3_AVGS(v))) +/*@}*/ + +/*! + * @name Register ADC_SC3, field AVGE[2] (RW) + * + * Enables the hardware average function of the ADC. + * + * Values: + * - 0 - Hardware average function disabled. + * - 1 - Hardware average function enabled. + */ +/*@{*/ +#define BP_ADC_SC3_AVGE (2U) /*!< Bit position for ADC_SC3_AVGE. */ +#define BM_ADC_SC3_AVGE (0x00000004U) /*!< Bit mask for ADC_SC3_AVGE. */ +#define BS_ADC_SC3_AVGE (1U) /*!< Bit field size in bits for ADC_SC3_AVGE. */ + +/*! @brief Read current value of the ADC_SC3_AVGE field. */ +#define BR_ADC_SC3_AVGE(x) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_AVGE)) + +/*! @brief Format value for bitfield ADC_SC3_AVGE. */ +#define BF_ADC_SC3_AVGE(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC3_AVGE) & BM_ADC_SC3_AVGE) + +/*! @brief Set the AVGE field to a new value. */ +#define BW_ADC_SC3_AVGE(x, v) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_AVGE) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC3, field ADCO[3] (RW) + * + * Enables continuous conversions. + * + * Values: + * - 0 - One conversion or one set of conversions if the hardware average + * function is enabled, that is, AVGE=1, after initiating a conversion. + * - 1 - Continuous conversions or sets of conversions if the hardware average + * function is enabled, that is, AVGE=1, after initiating a conversion. + */ +/*@{*/ +#define BP_ADC_SC3_ADCO (3U) /*!< Bit position for ADC_SC3_ADCO. */ +#define BM_ADC_SC3_ADCO (0x00000008U) /*!< Bit mask for ADC_SC3_ADCO. */ +#define BS_ADC_SC3_ADCO (1U) /*!< Bit field size in bits for ADC_SC3_ADCO. */ + +/*! @brief Read current value of the ADC_SC3_ADCO field. */ +#define BR_ADC_SC3_ADCO(x) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_ADCO)) + +/*! @brief Format value for bitfield ADC_SC3_ADCO. */ +#define BF_ADC_SC3_ADCO(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC3_ADCO) & BM_ADC_SC3_ADCO) + +/*! @brief Set the ADCO field to a new value. */ +#define BW_ADC_SC3_ADCO(x, v) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_ADCO) = (v)) +/*@}*/ + +/*! + * @name Register ADC_SC3, field CALF[6] (RO) + * + * Displays the result of the calibration sequence. The calibration sequence + * will fail if SC2[ADTRG] = 1, any ADC register is written, or any stop mode is + * entered before the calibration sequence completes. Writing 1 to CALF clears it. + * + * Values: + * - 0 - Calibration completed normally. + * - 1 - Calibration failed. ADC accuracy specifications are not guaranteed. + */ +/*@{*/ +#define BP_ADC_SC3_CALF (6U) /*!< Bit position for ADC_SC3_CALF. */ +#define BM_ADC_SC3_CALF (0x00000040U) /*!< Bit mask for ADC_SC3_CALF. */ +#define BS_ADC_SC3_CALF (1U) /*!< Bit field size in bits for ADC_SC3_CALF. */ + +/*! @brief Read current value of the ADC_SC3_CALF field. */ +#define BR_ADC_SC3_CALF(x) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_CALF)) +/*@}*/ + +/*! + * @name Register ADC_SC3, field CAL[7] (RW) + * + * Begins the calibration sequence when set. This field stays set while the + * calibration is in progress and is cleared when the calibration sequence is + * completed. CALF must be checked to determine the result of the calibration sequence. + * Once started, the calibration routine cannot be interrupted by writes to the + * ADC registers or the results will be invalid and CALF will set. Setting CAL + * will abort any current conversion. + */ +/*@{*/ +#define BP_ADC_SC3_CAL (7U) /*!< Bit position for ADC_SC3_CAL. */ +#define BM_ADC_SC3_CAL (0x00000080U) /*!< Bit mask for ADC_SC3_CAL. */ +#define BS_ADC_SC3_CAL (1U) /*!< Bit field size in bits for ADC_SC3_CAL. */ + +/*! @brief Read current value of the ADC_SC3_CAL field. */ +#define BR_ADC_SC3_CAL(x) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_CAL)) + +/*! @brief Format value for bitfield ADC_SC3_CAL. */ +#define BF_ADC_SC3_CAL(v) ((uint32_t)((uint32_t)(v) << BP_ADC_SC3_CAL) & BM_ADC_SC3_CAL) + +/*! @brief Set the CAL field to a new value. */ +#define BW_ADC_SC3_CAL(x, v) (BITBAND_ACCESS32(HW_ADC_SC3_ADDR(x), BP_ADC_SC3_CAL) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_ADC_OFS - ADC Offset Correction Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_OFS - ADC Offset Correction Register (RW) + * + * Reset value: 0x00000004U + * + * The ADC Offset Correction Register (OFS) contains the user-selected or + * calibration-generated offset error correction value. This register is a 2's + * complement, left-justified, 16-bit value . The value in OFS is subtracted from the + * conversion and the result is transferred into the result registers, Rn. If the + * result is greater than the maximum or less than the minimum result value, it is + * forced to the appropriate limit for the current mode of operation. + */ +typedef union _hw_adc_ofs +{ + uint32_t U; + struct _hw_adc_ofs_bitfields + { + uint32_t OFS : 16; /*!< [15:0] Offset Error Correction Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_ofs_t; + +/*! + * @name Constants and macros for entire ADC_OFS register + */ +/*@{*/ +#define HW_ADC_OFS_ADDR(x) ((x) + 0x28U) + +#define HW_ADC_OFS(x) (*(__IO hw_adc_ofs_t *) HW_ADC_OFS_ADDR(x)) +#define HW_ADC_OFS_RD(x) (HW_ADC_OFS(x).U) +#define HW_ADC_OFS_WR(x, v) (HW_ADC_OFS(x).U = (v)) +#define HW_ADC_OFS_SET(x, v) (HW_ADC_OFS_WR(x, HW_ADC_OFS_RD(x) | (v))) +#define HW_ADC_OFS_CLR(x, v) (HW_ADC_OFS_WR(x, HW_ADC_OFS_RD(x) & ~(v))) +#define HW_ADC_OFS_TOG(x, v) (HW_ADC_OFS_WR(x, HW_ADC_OFS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_OFS bitfields + */ + +/*! + * @name Register ADC_OFS, field OFS[15:0] (RW) + */ +/*@{*/ +#define BP_ADC_OFS_OFS (0U) /*!< Bit position for ADC_OFS_OFS. */ +#define BM_ADC_OFS_OFS (0x0000FFFFU) /*!< Bit mask for ADC_OFS_OFS. */ +#define BS_ADC_OFS_OFS (16U) /*!< Bit field size in bits for ADC_OFS_OFS. */ + +/*! @brief Read current value of the ADC_OFS_OFS field. */ +#define BR_ADC_OFS_OFS(x) (HW_ADC_OFS(x).B.OFS) + +/*! @brief Format value for bitfield ADC_OFS_OFS. */ +#define BF_ADC_OFS_OFS(v) ((uint32_t)((uint32_t)(v) << BP_ADC_OFS_OFS) & BM_ADC_OFS_OFS) + +/*! @brief Set the OFS field to a new value. */ +#define BW_ADC_OFS_OFS(x, v) (HW_ADC_OFS_WR(x, (HW_ADC_OFS_RD(x) & ~BM_ADC_OFS_OFS) | BF_ADC_OFS_OFS(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_PG - ADC Plus-Side Gain Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_PG - ADC Plus-Side Gain Register (RW) + * + * Reset value: 0x00008200U + * + * The Plus-Side Gain Register (PG) contains the gain error correction for the + * plus-side input in differential mode or the overall conversion in single-ended + * mode. PG, a 16-bit real number in binary format, is the gain adjustment + * factor, with the radix point fixed between ADPG15 and ADPG14. This register must be + * written by the user with the value described in the calibration procedure. + * Otherwise, the gain error specifications may not be met. + */ +typedef union _hw_adc_pg +{ + uint32_t U; + struct _hw_adc_pg_bitfields + { + uint32_t PG : 16; /*!< [15:0] Plus-Side Gain */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_pg_t; + +/*! + * @name Constants and macros for entire ADC_PG register + */ +/*@{*/ +#define HW_ADC_PG_ADDR(x) ((x) + 0x2CU) + +#define HW_ADC_PG(x) (*(__IO hw_adc_pg_t *) HW_ADC_PG_ADDR(x)) +#define HW_ADC_PG_RD(x) (HW_ADC_PG(x).U) +#define HW_ADC_PG_WR(x, v) (HW_ADC_PG(x).U = (v)) +#define HW_ADC_PG_SET(x, v) (HW_ADC_PG_WR(x, HW_ADC_PG_RD(x) | (v))) +#define HW_ADC_PG_CLR(x, v) (HW_ADC_PG_WR(x, HW_ADC_PG_RD(x) & ~(v))) +#define HW_ADC_PG_TOG(x, v) (HW_ADC_PG_WR(x, HW_ADC_PG_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_PG bitfields + */ + +/*! + * @name Register ADC_PG, field PG[15:0] (RW) + */ +/*@{*/ +#define BP_ADC_PG_PG (0U) /*!< Bit position for ADC_PG_PG. */ +#define BM_ADC_PG_PG (0x0000FFFFU) /*!< Bit mask for ADC_PG_PG. */ +#define BS_ADC_PG_PG (16U) /*!< Bit field size in bits for ADC_PG_PG. */ + +/*! @brief Read current value of the ADC_PG_PG field. */ +#define BR_ADC_PG_PG(x) (HW_ADC_PG(x).B.PG) + +/*! @brief Format value for bitfield ADC_PG_PG. */ +#define BF_ADC_PG_PG(v) ((uint32_t)((uint32_t)(v) << BP_ADC_PG_PG) & BM_ADC_PG_PG) + +/*! @brief Set the PG field to a new value. */ +#define BW_ADC_PG_PG(x, v) (HW_ADC_PG_WR(x, (HW_ADC_PG_RD(x) & ~BM_ADC_PG_PG) | BF_ADC_PG_PG(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_MG - ADC Minus-Side Gain Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_MG - ADC Minus-Side Gain Register (RW) + * + * Reset value: 0x00008200U + * + * The Minus-Side Gain Register (MG) contains the gain error correction for the + * minus-side input in differential mode. This register is ignored in + * single-ended mode. MG, a 16-bit real number in binary format, is the gain adjustment + * factor, with the radix point fixed between ADMG15 and ADMG14. This register must + * be written by the user with the value described in the calibration procedure. + * Otherwise, the gain error specifications may not be met. + */ +typedef union _hw_adc_mg +{ + uint32_t U; + struct _hw_adc_mg_bitfields + { + uint32_t MG : 16; /*!< [15:0] Minus-Side Gain */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_adc_mg_t; + +/*! + * @name Constants and macros for entire ADC_MG register + */ +/*@{*/ +#define HW_ADC_MG_ADDR(x) ((x) + 0x30U) + +#define HW_ADC_MG(x) (*(__IO hw_adc_mg_t *) HW_ADC_MG_ADDR(x)) +#define HW_ADC_MG_RD(x) (HW_ADC_MG(x).U) +#define HW_ADC_MG_WR(x, v) (HW_ADC_MG(x).U = (v)) +#define HW_ADC_MG_SET(x, v) (HW_ADC_MG_WR(x, HW_ADC_MG_RD(x) | (v))) +#define HW_ADC_MG_CLR(x, v) (HW_ADC_MG_WR(x, HW_ADC_MG_RD(x) & ~(v))) +#define HW_ADC_MG_TOG(x, v) (HW_ADC_MG_WR(x, HW_ADC_MG_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_MG bitfields + */ + +/*! + * @name Register ADC_MG, field MG[15:0] (RW) + */ +/*@{*/ +#define BP_ADC_MG_MG (0U) /*!< Bit position for ADC_MG_MG. */ +#define BM_ADC_MG_MG (0x0000FFFFU) /*!< Bit mask for ADC_MG_MG. */ +#define BS_ADC_MG_MG (16U) /*!< Bit field size in bits for ADC_MG_MG. */ + +/*! @brief Read current value of the ADC_MG_MG field. */ +#define BR_ADC_MG_MG(x) (HW_ADC_MG(x).B.MG) + +/*! @brief Format value for bitfield ADC_MG_MG. */ +#define BF_ADC_MG_MG(v) ((uint32_t)((uint32_t)(v) << BP_ADC_MG_MG) & BM_ADC_MG_MG) + +/*! @brief Set the MG field to a new value. */ +#define BW_ADC_MG_MG(x, v) (HW_ADC_MG_WR(x, (HW_ADC_MG_RD(x) & ~BM_ADC_MG_MG) | BF_ADC_MG_MG(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLPD - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLPD - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x0000000AU + * + * The Plus-Side General Calibration Value Registers (CLPx) contain calibration + * information that is generated by the calibration function. These registers + * contain seven calibration values of varying widths: CLP0[5:0], CLP1[6:0], + * CLP2[7:0], CLP3[8:0], CLP4[9:0], CLPS[5:0], and CLPD[5:0]. CLPx are automatically set + * when the self-calibration sequence is done, that is, CAL is cleared. If these + * registers are written by the user after calibration, the linearity error + * specifications may not be met. + */ +typedef union _hw_adc_clpd +{ + uint32_t U; + struct _hw_adc_clpd_bitfields + { + uint32_t CLPD : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clpd_t; + +/*! + * @name Constants and macros for entire ADC_CLPD register + */ +/*@{*/ +#define HW_ADC_CLPD_ADDR(x) ((x) + 0x34U) + +#define HW_ADC_CLPD(x) (*(__IO hw_adc_clpd_t *) HW_ADC_CLPD_ADDR(x)) +#define HW_ADC_CLPD_RD(x) (HW_ADC_CLPD(x).U) +#define HW_ADC_CLPD_WR(x, v) (HW_ADC_CLPD(x).U = (v)) +#define HW_ADC_CLPD_SET(x, v) (HW_ADC_CLPD_WR(x, HW_ADC_CLPD_RD(x) | (v))) +#define HW_ADC_CLPD_CLR(x, v) (HW_ADC_CLPD_WR(x, HW_ADC_CLPD_RD(x) & ~(v))) +#define HW_ADC_CLPD_TOG(x, v) (HW_ADC_CLPD_WR(x, HW_ADC_CLPD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLPD bitfields + */ + +/*! + * @name Register ADC_CLPD, field CLPD[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLPD_CLPD (0U) /*!< Bit position for ADC_CLPD_CLPD. */ +#define BM_ADC_CLPD_CLPD (0x0000003FU) /*!< Bit mask for ADC_CLPD_CLPD. */ +#define BS_ADC_CLPD_CLPD (6U) /*!< Bit field size in bits for ADC_CLPD_CLPD. */ + +/*! @brief Read current value of the ADC_CLPD_CLPD field. */ +#define BR_ADC_CLPD_CLPD(x) (HW_ADC_CLPD(x).B.CLPD) + +/*! @brief Format value for bitfield ADC_CLPD_CLPD. */ +#define BF_ADC_CLPD_CLPD(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLPD_CLPD) & BM_ADC_CLPD_CLPD) + +/*! @brief Set the CLPD field to a new value. */ +#define BW_ADC_CLPD_CLPD(x, v) (HW_ADC_CLPD_WR(x, (HW_ADC_CLPD_RD(x) & ~BM_ADC_CLPD_CLPD) | BF_ADC_CLPD_CLPD(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLPS - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLPS - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000020U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clps +{ + uint32_t U; + struct _hw_adc_clps_bitfields + { + uint32_t CLPS : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clps_t; + +/*! + * @name Constants and macros for entire ADC_CLPS register + */ +/*@{*/ +#define HW_ADC_CLPS_ADDR(x) ((x) + 0x38U) + +#define HW_ADC_CLPS(x) (*(__IO hw_adc_clps_t *) HW_ADC_CLPS_ADDR(x)) +#define HW_ADC_CLPS_RD(x) (HW_ADC_CLPS(x).U) +#define HW_ADC_CLPS_WR(x, v) (HW_ADC_CLPS(x).U = (v)) +#define HW_ADC_CLPS_SET(x, v) (HW_ADC_CLPS_WR(x, HW_ADC_CLPS_RD(x) | (v))) +#define HW_ADC_CLPS_CLR(x, v) (HW_ADC_CLPS_WR(x, HW_ADC_CLPS_RD(x) & ~(v))) +#define HW_ADC_CLPS_TOG(x, v) (HW_ADC_CLPS_WR(x, HW_ADC_CLPS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLPS bitfields + */ + +/*! + * @name Register ADC_CLPS, field CLPS[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLPS_CLPS (0U) /*!< Bit position for ADC_CLPS_CLPS. */ +#define BM_ADC_CLPS_CLPS (0x0000003FU) /*!< Bit mask for ADC_CLPS_CLPS. */ +#define BS_ADC_CLPS_CLPS (6U) /*!< Bit field size in bits for ADC_CLPS_CLPS. */ + +/*! @brief Read current value of the ADC_CLPS_CLPS field. */ +#define BR_ADC_CLPS_CLPS(x) (HW_ADC_CLPS(x).B.CLPS) + +/*! @brief Format value for bitfield ADC_CLPS_CLPS. */ +#define BF_ADC_CLPS_CLPS(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLPS_CLPS) & BM_ADC_CLPS_CLPS) + +/*! @brief Set the CLPS field to a new value. */ +#define BW_ADC_CLPS_CLPS(x, v) (HW_ADC_CLPS_WR(x, (HW_ADC_CLPS_RD(x) & ~BM_ADC_CLPS_CLPS) | BF_ADC_CLPS_CLPS(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLP4 - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLP4 - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000200U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clp4 +{ + uint32_t U; + struct _hw_adc_clp4_bitfields + { + uint32_t CLP4 : 10; /*!< [9:0] */ + uint32_t RESERVED0 : 22; /*!< [31:10] */ + } B; +} hw_adc_clp4_t; + +/*! + * @name Constants and macros for entire ADC_CLP4 register + */ +/*@{*/ +#define HW_ADC_CLP4_ADDR(x) ((x) + 0x3CU) + +#define HW_ADC_CLP4(x) (*(__IO hw_adc_clp4_t *) HW_ADC_CLP4_ADDR(x)) +#define HW_ADC_CLP4_RD(x) (HW_ADC_CLP4(x).U) +#define HW_ADC_CLP4_WR(x, v) (HW_ADC_CLP4(x).U = (v)) +#define HW_ADC_CLP4_SET(x, v) (HW_ADC_CLP4_WR(x, HW_ADC_CLP4_RD(x) | (v))) +#define HW_ADC_CLP4_CLR(x, v) (HW_ADC_CLP4_WR(x, HW_ADC_CLP4_RD(x) & ~(v))) +#define HW_ADC_CLP4_TOG(x, v) (HW_ADC_CLP4_WR(x, HW_ADC_CLP4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLP4 bitfields + */ + +/*! + * @name Register ADC_CLP4, field CLP4[9:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLP4_CLP4 (0U) /*!< Bit position for ADC_CLP4_CLP4. */ +#define BM_ADC_CLP4_CLP4 (0x000003FFU) /*!< Bit mask for ADC_CLP4_CLP4. */ +#define BS_ADC_CLP4_CLP4 (10U) /*!< Bit field size in bits for ADC_CLP4_CLP4. */ + +/*! @brief Read current value of the ADC_CLP4_CLP4 field. */ +#define BR_ADC_CLP4_CLP4(x) (HW_ADC_CLP4(x).B.CLP4) + +/*! @brief Format value for bitfield ADC_CLP4_CLP4. */ +#define BF_ADC_CLP4_CLP4(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLP4_CLP4) & BM_ADC_CLP4_CLP4) + +/*! @brief Set the CLP4 field to a new value. */ +#define BW_ADC_CLP4_CLP4(x, v) (HW_ADC_CLP4_WR(x, (HW_ADC_CLP4_RD(x) & ~BM_ADC_CLP4_CLP4) | BF_ADC_CLP4_CLP4(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLP3 - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLP3 - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000100U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clp3 +{ + uint32_t U; + struct _hw_adc_clp3_bitfields + { + uint32_t CLP3 : 9; /*!< [8:0] */ + uint32_t RESERVED0 : 23; /*!< [31:9] */ + } B; +} hw_adc_clp3_t; + +/*! + * @name Constants and macros for entire ADC_CLP3 register + */ +/*@{*/ +#define HW_ADC_CLP3_ADDR(x) ((x) + 0x40U) + +#define HW_ADC_CLP3(x) (*(__IO hw_adc_clp3_t *) HW_ADC_CLP3_ADDR(x)) +#define HW_ADC_CLP3_RD(x) (HW_ADC_CLP3(x).U) +#define HW_ADC_CLP3_WR(x, v) (HW_ADC_CLP3(x).U = (v)) +#define HW_ADC_CLP3_SET(x, v) (HW_ADC_CLP3_WR(x, HW_ADC_CLP3_RD(x) | (v))) +#define HW_ADC_CLP3_CLR(x, v) (HW_ADC_CLP3_WR(x, HW_ADC_CLP3_RD(x) & ~(v))) +#define HW_ADC_CLP3_TOG(x, v) (HW_ADC_CLP3_WR(x, HW_ADC_CLP3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLP3 bitfields + */ + +/*! + * @name Register ADC_CLP3, field CLP3[8:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLP3_CLP3 (0U) /*!< Bit position for ADC_CLP3_CLP3. */ +#define BM_ADC_CLP3_CLP3 (0x000001FFU) /*!< Bit mask for ADC_CLP3_CLP3. */ +#define BS_ADC_CLP3_CLP3 (9U) /*!< Bit field size in bits for ADC_CLP3_CLP3. */ + +/*! @brief Read current value of the ADC_CLP3_CLP3 field. */ +#define BR_ADC_CLP3_CLP3(x) (HW_ADC_CLP3(x).B.CLP3) + +/*! @brief Format value for bitfield ADC_CLP3_CLP3. */ +#define BF_ADC_CLP3_CLP3(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLP3_CLP3) & BM_ADC_CLP3_CLP3) + +/*! @brief Set the CLP3 field to a new value. */ +#define BW_ADC_CLP3_CLP3(x, v) (HW_ADC_CLP3_WR(x, (HW_ADC_CLP3_RD(x) & ~BM_ADC_CLP3_CLP3) | BF_ADC_CLP3_CLP3(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLP2 - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLP2 - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000080U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clp2 +{ + uint32_t U; + struct _hw_adc_clp2_bitfields + { + uint32_t CLP2 : 8; /*!< [7:0] */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_adc_clp2_t; + +/*! + * @name Constants and macros for entire ADC_CLP2 register + */ +/*@{*/ +#define HW_ADC_CLP2_ADDR(x) ((x) + 0x44U) + +#define HW_ADC_CLP2(x) (*(__IO hw_adc_clp2_t *) HW_ADC_CLP2_ADDR(x)) +#define HW_ADC_CLP2_RD(x) (HW_ADC_CLP2(x).U) +#define HW_ADC_CLP2_WR(x, v) (HW_ADC_CLP2(x).U = (v)) +#define HW_ADC_CLP2_SET(x, v) (HW_ADC_CLP2_WR(x, HW_ADC_CLP2_RD(x) | (v))) +#define HW_ADC_CLP2_CLR(x, v) (HW_ADC_CLP2_WR(x, HW_ADC_CLP2_RD(x) & ~(v))) +#define HW_ADC_CLP2_TOG(x, v) (HW_ADC_CLP2_WR(x, HW_ADC_CLP2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLP2 bitfields + */ + +/*! + * @name Register ADC_CLP2, field CLP2[7:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLP2_CLP2 (0U) /*!< Bit position for ADC_CLP2_CLP2. */ +#define BM_ADC_CLP2_CLP2 (0x000000FFU) /*!< Bit mask for ADC_CLP2_CLP2. */ +#define BS_ADC_CLP2_CLP2 (8U) /*!< Bit field size in bits for ADC_CLP2_CLP2. */ + +/*! @brief Read current value of the ADC_CLP2_CLP2 field. */ +#define BR_ADC_CLP2_CLP2(x) (HW_ADC_CLP2(x).B.CLP2) + +/*! @brief Format value for bitfield ADC_CLP2_CLP2. */ +#define BF_ADC_CLP2_CLP2(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLP2_CLP2) & BM_ADC_CLP2_CLP2) + +/*! @brief Set the CLP2 field to a new value. */ +#define BW_ADC_CLP2_CLP2(x, v) (HW_ADC_CLP2_WR(x, (HW_ADC_CLP2_RD(x) & ~BM_ADC_CLP2_CLP2) | BF_ADC_CLP2_CLP2(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLP1 - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLP1 - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000040U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clp1 +{ + uint32_t U; + struct _hw_adc_clp1_bitfields + { + uint32_t CLP1 : 7; /*!< [6:0] */ + uint32_t RESERVED0 : 25; /*!< [31:7] */ + } B; +} hw_adc_clp1_t; + +/*! + * @name Constants and macros for entire ADC_CLP1 register + */ +/*@{*/ +#define HW_ADC_CLP1_ADDR(x) ((x) + 0x48U) + +#define HW_ADC_CLP1(x) (*(__IO hw_adc_clp1_t *) HW_ADC_CLP1_ADDR(x)) +#define HW_ADC_CLP1_RD(x) (HW_ADC_CLP1(x).U) +#define HW_ADC_CLP1_WR(x, v) (HW_ADC_CLP1(x).U = (v)) +#define HW_ADC_CLP1_SET(x, v) (HW_ADC_CLP1_WR(x, HW_ADC_CLP1_RD(x) | (v))) +#define HW_ADC_CLP1_CLR(x, v) (HW_ADC_CLP1_WR(x, HW_ADC_CLP1_RD(x) & ~(v))) +#define HW_ADC_CLP1_TOG(x, v) (HW_ADC_CLP1_WR(x, HW_ADC_CLP1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLP1 bitfields + */ + +/*! + * @name Register ADC_CLP1, field CLP1[6:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLP1_CLP1 (0U) /*!< Bit position for ADC_CLP1_CLP1. */ +#define BM_ADC_CLP1_CLP1 (0x0000007FU) /*!< Bit mask for ADC_CLP1_CLP1. */ +#define BS_ADC_CLP1_CLP1 (7U) /*!< Bit field size in bits for ADC_CLP1_CLP1. */ + +/*! @brief Read current value of the ADC_CLP1_CLP1 field. */ +#define BR_ADC_CLP1_CLP1(x) (HW_ADC_CLP1(x).B.CLP1) + +/*! @brief Format value for bitfield ADC_CLP1_CLP1. */ +#define BF_ADC_CLP1_CLP1(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLP1_CLP1) & BM_ADC_CLP1_CLP1) + +/*! @brief Set the CLP1 field to a new value. */ +#define BW_ADC_CLP1_CLP1(x, v) (HW_ADC_CLP1_WR(x, (HW_ADC_CLP1_RD(x) & ~BM_ADC_CLP1_CLP1) | BF_ADC_CLP1_CLP1(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLP0 - ADC Plus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLP0 - ADC Plus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000020U + * + * For more information, see CLPD register description. + */ +typedef union _hw_adc_clp0 +{ + uint32_t U; + struct _hw_adc_clp0_bitfields + { + uint32_t CLP0 : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clp0_t; + +/*! + * @name Constants and macros for entire ADC_CLP0 register + */ +/*@{*/ +#define HW_ADC_CLP0_ADDR(x) ((x) + 0x4CU) + +#define HW_ADC_CLP0(x) (*(__IO hw_adc_clp0_t *) HW_ADC_CLP0_ADDR(x)) +#define HW_ADC_CLP0_RD(x) (HW_ADC_CLP0(x).U) +#define HW_ADC_CLP0_WR(x, v) (HW_ADC_CLP0(x).U = (v)) +#define HW_ADC_CLP0_SET(x, v) (HW_ADC_CLP0_WR(x, HW_ADC_CLP0_RD(x) | (v))) +#define HW_ADC_CLP0_CLR(x, v) (HW_ADC_CLP0_WR(x, HW_ADC_CLP0_RD(x) & ~(v))) +#define HW_ADC_CLP0_TOG(x, v) (HW_ADC_CLP0_WR(x, HW_ADC_CLP0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLP0 bitfields + */ + +/*! + * @name Register ADC_CLP0, field CLP0[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLP0_CLP0 (0U) /*!< Bit position for ADC_CLP0_CLP0. */ +#define BM_ADC_CLP0_CLP0 (0x0000003FU) /*!< Bit mask for ADC_CLP0_CLP0. */ +#define BS_ADC_CLP0_CLP0 (6U) /*!< Bit field size in bits for ADC_CLP0_CLP0. */ + +/*! @brief Read current value of the ADC_CLP0_CLP0 field. */ +#define BR_ADC_CLP0_CLP0(x) (HW_ADC_CLP0(x).B.CLP0) + +/*! @brief Format value for bitfield ADC_CLP0_CLP0. */ +#define BF_ADC_CLP0_CLP0(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLP0_CLP0) & BM_ADC_CLP0_CLP0) + +/*! @brief Set the CLP0 field to a new value. */ +#define BW_ADC_CLP0_CLP0(x, v) (HW_ADC_CLP0_WR(x, (HW_ADC_CLP0_RD(x) & ~BM_ADC_CLP0_CLP0) | BF_ADC_CLP0_CLP0(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLMD - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLMD - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x0000000AU + * + * The Minus-Side General Calibration Value (CLMx) registers contain calibration + * information that is generated by the calibration function. These registers + * contain seven calibration values of varying widths: CLM0[5:0], CLM1[6:0], + * CLM2[7:0], CLM3[8:0], CLM4[9:0], CLMS[5:0], and CLMD[5:0]. CLMx are automatically + * set when the self-calibration sequence is done, that is, CAL is cleared. If + * these registers are written by the user after calibration, the linearity error + * specifications may not be met. + */ +typedef union _hw_adc_clmd +{ + uint32_t U; + struct _hw_adc_clmd_bitfields + { + uint32_t CLMD : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clmd_t; + +/*! + * @name Constants and macros for entire ADC_CLMD register + */ +/*@{*/ +#define HW_ADC_CLMD_ADDR(x) ((x) + 0x54U) + +#define HW_ADC_CLMD(x) (*(__IO hw_adc_clmd_t *) HW_ADC_CLMD_ADDR(x)) +#define HW_ADC_CLMD_RD(x) (HW_ADC_CLMD(x).U) +#define HW_ADC_CLMD_WR(x, v) (HW_ADC_CLMD(x).U = (v)) +#define HW_ADC_CLMD_SET(x, v) (HW_ADC_CLMD_WR(x, HW_ADC_CLMD_RD(x) | (v))) +#define HW_ADC_CLMD_CLR(x, v) (HW_ADC_CLMD_WR(x, HW_ADC_CLMD_RD(x) & ~(v))) +#define HW_ADC_CLMD_TOG(x, v) (HW_ADC_CLMD_WR(x, HW_ADC_CLMD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLMD bitfields + */ + +/*! + * @name Register ADC_CLMD, field CLMD[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLMD_CLMD (0U) /*!< Bit position for ADC_CLMD_CLMD. */ +#define BM_ADC_CLMD_CLMD (0x0000003FU) /*!< Bit mask for ADC_CLMD_CLMD. */ +#define BS_ADC_CLMD_CLMD (6U) /*!< Bit field size in bits for ADC_CLMD_CLMD. */ + +/*! @brief Read current value of the ADC_CLMD_CLMD field. */ +#define BR_ADC_CLMD_CLMD(x) (HW_ADC_CLMD(x).B.CLMD) + +/*! @brief Format value for bitfield ADC_CLMD_CLMD. */ +#define BF_ADC_CLMD_CLMD(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLMD_CLMD) & BM_ADC_CLMD_CLMD) + +/*! @brief Set the CLMD field to a new value. */ +#define BW_ADC_CLMD_CLMD(x, v) (HW_ADC_CLMD_WR(x, (HW_ADC_CLMD_RD(x) & ~BM_ADC_CLMD_CLMD) | BF_ADC_CLMD_CLMD(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLMS - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLMS - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000020U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clms +{ + uint32_t U; + struct _hw_adc_clms_bitfields + { + uint32_t CLMS : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clms_t; + +/*! + * @name Constants and macros for entire ADC_CLMS register + */ +/*@{*/ +#define HW_ADC_CLMS_ADDR(x) ((x) + 0x58U) + +#define HW_ADC_CLMS(x) (*(__IO hw_adc_clms_t *) HW_ADC_CLMS_ADDR(x)) +#define HW_ADC_CLMS_RD(x) (HW_ADC_CLMS(x).U) +#define HW_ADC_CLMS_WR(x, v) (HW_ADC_CLMS(x).U = (v)) +#define HW_ADC_CLMS_SET(x, v) (HW_ADC_CLMS_WR(x, HW_ADC_CLMS_RD(x) | (v))) +#define HW_ADC_CLMS_CLR(x, v) (HW_ADC_CLMS_WR(x, HW_ADC_CLMS_RD(x) & ~(v))) +#define HW_ADC_CLMS_TOG(x, v) (HW_ADC_CLMS_WR(x, HW_ADC_CLMS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLMS bitfields + */ + +/*! + * @name Register ADC_CLMS, field CLMS[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLMS_CLMS (0U) /*!< Bit position for ADC_CLMS_CLMS. */ +#define BM_ADC_CLMS_CLMS (0x0000003FU) /*!< Bit mask for ADC_CLMS_CLMS. */ +#define BS_ADC_CLMS_CLMS (6U) /*!< Bit field size in bits for ADC_CLMS_CLMS. */ + +/*! @brief Read current value of the ADC_CLMS_CLMS field. */ +#define BR_ADC_CLMS_CLMS(x) (HW_ADC_CLMS(x).B.CLMS) + +/*! @brief Format value for bitfield ADC_CLMS_CLMS. */ +#define BF_ADC_CLMS_CLMS(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLMS_CLMS) & BM_ADC_CLMS_CLMS) + +/*! @brief Set the CLMS field to a new value. */ +#define BW_ADC_CLMS_CLMS(x, v) (HW_ADC_CLMS_WR(x, (HW_ADC_CLMS_RD(x) & ~BM_ADC_CLMS_CLMS) | BF_ADC_CLMS_CLMS(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLM4 - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLM4 - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000200U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clm4 +{ + uint32_t U; + struct _hw_adc_clm4_bitfields + { + uint32_t CLM4 : 10; /*!< [9:0] */ + uint32_t RESERVED0 : 22; /*!< [31:10] */ + } B; +} hw_adc_clm4_t; + +/*! + * @name Constants and macros for entire ADC_CLM4 register + */ +/*@{*/ +#define HW_ADC_CLM4_ADDR(x) ((x) + 0x5CU) + +#define HW_ADC_CLM4(x) (*(__IO hw_adc_clm4_t *) HW_ADC_CLM4_ADDR(x)) +#define HW_ADC_CLM4_RD(x) (HW_ADC_CLM4(x).U) +#define HW_ADC_CLM4_WR(x, v) (HW_ADC_CLM4(x).U = (v)) +#define HW_ADC_CLM4_SET(x, v) (HW_ADC_CLM4_WR(x, HW_ADC_CLM4_RD(x) | (v))) +#define HW_ADC_CLM4_CLR(x, v) (HW_ADC_CLM4_WR(x, HW_ADC_CLM4_RD(x) & ~(v))) +#define HW_ADC_CLM4_TOG(x, v) (HW_ADC_CLM4_WR(x, HW_ADC_CLM4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLM4 bitfields + */ + +/*! + * @name Register ADC_CLM4, field CLM4[9:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLM4_CLM4 (0U) /*!< Bit position for ADC_CLM4_CLM4. */ +#define BM_ADC_CLM4_CLM4 (0x000003FFU) /*!< Bit mask for ADC_CLM4_CLM4. */ +#define BS_ADC_CLM4_CLM4 (10U) /*!< Bit field size in bits for ADC_CLM4_CLM4. */ + +/*! @brief Read current value of the ADC_CLM4_CLM4 field. */ +#define BR_ADC_CLM4_CLM4(x) (HW_ADC_CLM4(x).B.CLM4) + +/*! @brief Format value for bitfield ADC_CLM4_CLM4. */ +#define BF_ADC_CLM4_CLM4(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLM4_CLM4) & BM_ADC_CLM4_CLM4) + +/*! @brief Set the CLM4 field to a new value. */ +#define BW_ADC_CLM4_CLM4(x, v) (HW_ADC_CLM4_WR(x, (HW_ADC_CLM4_RD(x) & ~BM_ADC_CLM4_CLM4) | BF_ADC_CLM4_CLM4(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLM3 - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLM3 - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000100U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clm3 +{ + uint32_t U; + struct _hw_adc_clm3_bitfields + { + uint32_t CLM3 : 9; /*!< [8:0] */ + uint32_t RESERVED0 : 23; /*!< [31:9] */ + } B; +} hw_adc_clm3_t; + +/*! + * @name Constants and macros for entire ADC_CLM3 register + */ +/*@{*/ +#define HW_ADC_CLM3_ADDR(x) ((x) + 0x60U) + +#define HW_ADC_CLM3(x) (*(__IO hw_adc_clm3_t *) HW_ADC_CLM3_ADDR(x)) +#define HW_ADC_CLM3_RD(x) (HW_ADC_CLM3(x).U) +#define HW_ADC_CLM3_WR(x, v) (HW_ADC_CLM3(x).U = (v)) +#define HW_ADC_CLM3_SET(x, v) (HW_ADC_CLM3_WR(x, HW_ADC_CLM3_RD(x) | (v))) +#define HW_ADC_CLM3_CLR(x, v) (HW_ADC_CLM3_WR(x, HW_ADC_CLM3_RD(x) & ~(v))) +#define HW_ADC_CLM3_TOG(x, v) (HW_ADC_CLM3_WR(x, HW_ADC_CLM3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLM3 bitfields + */ + +/*! + * @name Register ADC_CLM3, field CLM3[8:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLM3_CLM3 (0U) /*!< Bit position for ADC_CLM3_CLM3. */ +#define BM_ADC_CLM3_CLM3 (0x000001FFU) /*!< Bit mask for ADC_CLM3_CLM3. */ +#define BS_ADC_CLM3_CLM3 (9U) /*!< Bit field size in bits for ADC_CLM3_CLM3. */ + +/*! @brief Read current value of the ADC_CLM3_CLM3 field. */ +#define BR_ADC_CLM3_CLM3(x) (HW_ADC_CLM3(x).B.CLM3) + +/*! @brief Format value for bitfield ADC_CLM3_CLM3. */ +#define BF_ADC_CLM3_CLM3(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLM3_CLM3) & BM_ADC_CLM3_CLM3) + +/*! @brief Set the CLM3 field to a new value. */ +#define BW_ADC_CLM3_CLM3(x, v) (HW_ADC_CLM3_WR(x, (HW_ADC_CLM3_RD(x) & ~BM_ADC_CLM3_CLM3) | BF_ADC_CLM3_CLM3(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLM2 - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLM2 - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000080U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clm2 +{ + uint32_t U; + struct _hw_adc_clm2_bitfields + { + uint32_t CLM2 : 8; /*!< [7:0] */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_adc_clm2_t; + +/*! + * @name Constants and macros for entire ADC_CLM2 register + */ +/*@{*/ +#define HW_ADC_CLM2_ADDR(x) ((x) + 0x64U) + +#define HW_ADC_CLM2(x) (*(__IO hw_adc_clm2_t *) HW_ADC_CLM2_ADDR(x)) +#define HW_ADC_CLM2_RD(x) (HW_ADC_CLM2(x).U) +#define HW_ADC_CLM2_WR(x, v) (HW_ADC_CLM2(x).U = (v)) +#define HW_ADC_CLM2_SET(x, v) (HW_ADC_CLM2_WR(x, HW_ADC_CLM2_RD(x) | (v))) +#define HW_ADC_CLM2_CLR(x, v) (HW_ADC_CLM2_WR(x, HW_ADC_CLM2_RD(x) & ~(v))) +#define HW_ADC_CLM2_TOG(x, v) (HW_ADC_CLM2_WR(x, HW_ADC_CLM2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLM2 bitfields + */ + +/*! + * @name Register ADC_CLM2, field CLM2[7:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLM2_CLM2 (0U) /*!< Bit position for ADC_CLM2_CLM2. */ +#define BM_ADC_CLM2_CLM2 (0x000000FFU) /*!< Bit mask for ADC_CLM2_CLM2. */ +#define BS_ADC_CLM2_CLM2 (8U) /*!< Bit field size in bits for ADC_CLM2_CLM2. */ + +/*! @brief Read current value of the ADC_CLM2_CLM2 field. */ +#define BR_ADC_CLM2_CLM2(x) (HW_ADC_CLM2(x).B.CLM2) + +/*! @brief Format value for bitfield ADC_CLM2_CLM2. */ +#define BF_ADC_CLM2_CLM2(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLM2_CLM2) & BM_ADC_CLM2_CLM2) + +/*! @brief Set the CLM2 field to a new value. */ +#define BW_ADC_CLM2_CLM2(x, v) (HW_ADC_CLM2_WR(x, (HW_ADC_CLM2_RD(x) & ~BM_ADC_CLM2_CLM2) | BF_ADC_CLM2_CLM2(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLM1 - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLM1 - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000040U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clm1 +{ + uint32_t U; + struct _hw_adc_clm1_bitfields + { + uint32_t CLM1 : 7; /*!< [6:0] */ + uint32_t RESERVED0 : 25; /*!< [31:7] */ + } B; +} hw_adc_clm1_t; + +/*! + * @name Constants and macros for entire ADC_CLM1 register + */ +/*@{*/ +#define HW_ADC_CLM1_ADDR(x) ((x) + 0x68U) + +#define HW_ADC_CLM1(x) (*(__IO hw_adc_clm1_t *) HW_ADC_CLM1_ADDR(x)) +#define HW_ADC_CLM1_RD(x) (HW_ADC_CLM1(x).U) +#define HW_ADC_CLM1_WR(x, v) (HW_ADC_CLM1(x).U = (v)) +#define HW_ADC_CLM1_SET(x, v) (HW_ADC_CLM1_WR(x, HW_ADC_CLM1_RD(x) | (v))) +#define HW_ADC_CLM1_CLR(x, v) (HW_ADC_CLM1_WR(x, HW_ADC_CLM1_RD(x) & ~(v))) +#define HW_ADC_CLM1_TOG(x, v) (HW_ADC_CLM1_WR(x, HW_ADC_CLM1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLM1 bitfields + */ + +/*! + * @name Register ADC_CLM1, field CLM1[6:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLM1_CLM1 (0U) /*!< Bit position for ADC_CLM1_CLM1. */ +#define BM_ADC_CLM1_CLM1 (0x0000007FU) /*!< Bit mask for ADC_CLM1_CLM1. */ +#define BS_ADC_CLM1_CLM1 (7U) /*!< Bit field size in bits for ADC_CLM1_CLM1. */ + +/*! @brief Read current value of the ADC_CLM1_CLM1 field. */ +#define BR_ADC_CLM1_CLM1(x) (HW_ADC_CLM1(x).B.CLM1) + +/*! @brief Format value for bitfield ADC_CLM1_CLM1. */ +#define BF_ADC_CLM1_CLM1(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLM1_CLM1) & BM_ADC_CLM1_CLM1) + +/*! @brief Set the CLM1 field to a new value. */ +#define BW_ADC_CLM1_CLM1(x, v) (HW_ADC_CLM1_WR(x, (HW_ADC_CLM1_RD(x) & ~BM_ADC_CLM1_CLM1) | BF_ADC_CLM1_CLM1(v))) +/*@}*/ + +/******************************************************************************* + * HW_ADC_CLM0 - ADC Minus-Side General Calibration Value Register + ******************************************************************************/ + +/*! + * @brief HW_ADC_CLM0 - ADC Minus-Side General Calibration Value Register (RW) + * + * Reset value: 0x00000020U + * + * For more information, see CLMD register description. + */ +typedef union _hw_adc_clm0 +{ + uint32_t U; + struct _hw_adc_clm0_bitfields + { + uint32_t CLM0 : 6; /*!< [5:0] */ + uint32_t RESERVED0 : 26; /*!< [31:6] */ + } B; +} hw_adc_clm0_t; + +/*! + * @name Constants and macros for entire ADC_CLM0 register + */ +/*@{*/ +#define HW_ADC_CLM0_ADDR(x) ((x) + 0x6CU) + +#define HW_ADC_CLM0(x) (*(__IO hw_adc_clm0_t *) HW_ADC_CLM0_ADDR(x)) +#define HW_ADC_CLM0_RD(x) (HW_ADC_CLM0(x).U) +#define HW_ADC_CLM0_WR(x, v) (HW_ADC_CLM0(x).U = (v)) +#define HW_ADC_CLM0_SET(x, v) (HW_ADC_CLM0_WR(x, HW_ADC_CLM0_RD(x) | (v))) +#define HW_ADC_CLM0_CLR(x, v) (HW_ADC_CLM0_WR(x, HW_ADC_CLM0_RD(x) & ~(v))) +#define HW_ADC_CLM0_TOG(x, v) (HW_ADC_CLM0_WR(x, HW_ADC_CLM0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual ADC_CLM0 bitfields + */ + +/*! + * @name Register ADC_CLM0, field CLM0[5:0] (RW) + * + * Calibration Value + */ +/*@{*/ +#define BP_ADC_CLM0_CLM0 (0U) /*!< Bit position for ADC_CLM0_CLM0. */ +#define BM_ADC_CLM0_CLM0 (0x0000003FU) /*!< Bit mask for ADC_CLM0_CLM0. */ +#define BS_ADC_CLM0_CLM0 (6U) /*!< Bit field size in bits for ADC_CLM0_CLM0. */ + +/*! @brief Read current value of the ADC_CLM0_CLM0 field. */ +#define BR_ADC_CLM0_CLM0(x) (HW_ADC_CLM0(x).B.CLM0) + +/*! @brief Format value for bitfield ADC_CLM0_CLM0. */ +#define BF_ADC_CLM0_CLM0(v) ((uint32_t)((uint32_t)(v) << BP_ADC_CLM0_CLM0) & BM_ADC_CLM0_CLM0) + +/*! @brief Set the CLM0 field to a new value. */ +#define BW_ADC_CLM0_CLM0(x, v) (HW_ADC_CLM0_WR(x, (HW_ADC_CLM0_RD(x) & ~BM_ADC_CLM0_CLM0) | BF_ADC_CLM0_CLM0(v))) +/*@}*/ + +/******************************************************************************* + * hw_adc_t - module struct + ******************************************************************************/ +/*! + * @brief All ADC module registers. + */ +#pragma pack(1) +typedef struct _hw_adc +{ + __IO hw_adc_sc1n_t SC1n[2]; /*!< [0x0] ADC Status and Control Registers 1 */ + __IO hw_adc_cfg1_t CFG1; /*!< [0x8] ADC Configuration Register 1 */ + __IO hw_adc_cfg2_t CFG2; /*!< [0xC] ADC Configuration Register 2 */ + __I hw_adc_rn_t Rn[2]; /*!< [0x10] ADC Data Result Register */ + __IO hw_adc_cv1_t CV1; /*!< [0x18] Compare Value Registers */ + __IO hw_adc_cv2_t CV2; /*!< [0x1C] Compare Value Registers */ + __IO hw_adc_sc2_t SC2; /*!< [0x20] Status and Control Register 2 */ + __IO hw_adc_sc3_t SC3; /*!< [0x24] Status and Control Register 3 */ + __IO hw_adc_ofs_t OFS; /*!< [0x28] ADC Offset Correction Register */ + __IO hw_adc_pg_t PG; /*!< [0x2C] ADC Plus-Side Gain Register */ + __IO hw_adc_mg_t MG; /*!< [0x30] ADC Minus-Side Gain Register */ + __IO hw_adc_clpd_t CLPD; /*!< [0x34] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clps_t CLPS; /*!< [0x38] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clp4_t CLP4; /*!< [0x3C] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clp3_t CLP3; /*!< [0x40] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clp2_t CLP2; /*!< [0x44] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clp1_t CLP1; /*!< [0x48] ADC Plus-Side General Calibration Value Register */ + __IO hw_adc_clp0_t CLP0; /*!< [0x4C] ADC Plus-Side General Calibration Value Register */ + uint8_t _reserved0[4]; + __IO hw_adc_clmd_t CLMD; /*!< [0x54] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clms_t CLMS; /*!< [0x58] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clm4_t CLM4; /*!< [0x5C] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clm3_t CLM3; /*!< [0x60] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clm2_t CLM2; /*!< [0x64] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clm1_t CLM1; /*!< [0x68] ADC Minus-Side General Calibration Value Register */ + __IO hw_adc_clm0_t CLM0; /*!< [0x6C] ADC Minus-Side General Calibration Value Register */ +} hw_adc_t; +#pragma pack() + +/*! @brief Macro to access all ADC registers. */ +/*! @param x ADC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_ADC(ADC0_BASE)</code>. */ +#define HW_ADC(x) (*(hw_adc_t *)(x)) + +#endif /* __HW_ADC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_aips.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_aips.h new file mode 100644 index 0000000000..cda0b16db6 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_aips.h @@ -0,0 +1,13604 @@ +/* + * Copyright (c) 2013, Freescale Semiconductor, Inc. + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_AIPS_REGISTERS_H__ +#define __HW_AIPS_REGISTERS_H__ + +#include "regs.h" + +/* + * MK22F51212 AIPS + * + * AIPS-Lite Bridge + * + * Registers defined in this header file: + * - HW_AIPS_MPRA - Master Privilege Register A + * - HW_AIPS_PACRA - Peripheral Access Control Register + * - HW_AIPS_PACRB - Peripheral Access Control Register + * - HW_AIPS_PACRC - Peripheral Access Control Register + * - HW_AIPS_PACRD - Peripheral Access Control Register + * - HW_AIPS_PACRE - Peripheral Access Control Register + * - HW_AIPS_PACRF - Peripheral Access Control Register + * - HW_AIPS_PACRG - Peripheral Access Control Register + * - HW_AIPS_PACRH - Peripheral Access Control Register + * - HW_AIPS_PACRI - Peripheral Access Control Register + * - HW_AIPS_PACRJ - Peripheral Access Control Register + * - HW_AIPS_PACRK - Peripheral Access Control Register + * - HW_AIPS_PACRL - Peripheral Access Control Register + * - HW_AIPS_PACRM - Peripheral Access Control Register + * - HW_AIPS_PACRN - Peripheral Access Control Register + * - HW_AIPS_PACRO - Peripheral Access Control Register + * - HW_AIPS_PACRP - Peripheral Access Control Register + * - HW_AIPS_PACRU - Peripheral Access Control Register + * + * - hw_aips_t - Struct containing all module registers. + */ + +//! @name Module base addresses +//@{ +#ifndef REGS_AIPS_BASE +#define HW_AIPS_INSTANCE_COUNT (1U) //!< Number of instances of the AIPS module. +#define HW_AIPS0 (0U) //!< Instance number for AIPS0. +#define REGS_AIPS0_BASE (0x40000000U) //!< Base address for AIPS0. + +//! @brief Table of base addresses for AIPS instances. +static const uint32_t __g_regs_AIPS_base_addresses[] = { + REGS_AIPS0_BASE, + }; + +//! @brief Get the base address of AIPS by instance number. +//! @param x AIPS instance number, from 0 through 0. +#define REGS_AIPS_BASE(x) (__g_regs_AIPS_base_addresses[(x)]) + +//! @brief Get the instance number given a base address. +//! @param b Base address for an instance of AIPS. +#define REGS_AIPS_INSTANCE(b) ((b) == REGS_AIPS0_BASE ? HW_AIPS0 : 0) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_MPRA - Master Privilege Register A +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_MPRA - Master Privilege Register A (RW) + * + * Reset value: 0x00000000U + * + * The MPRA specifies identical 4-bit fields defining the access-privilege level + * associated with a bus master to various peripherals on the chip. The register + * provides one field per bus master. At reset, the default value loaded into + * the MPRA fields is chip-specific. See the chip configuration details for the + * value of a particular device. A register field that maps to an unimplemented + * master or peripheral behaves as read-only-zero. Each master is assigned a logical + * ID from 0 to 15. See the master logical ID assignement table in the AIPS + * chip-specific information. + */ +typedef union _hw_aips_mpra +{ + uint32_t U; + struct _hw_aips_mpra_bitfields + { + uint32_t RESERVED0 : 32; //!< [31:0] + } B; +} hw_aips_mpra_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_MPRA register + */ +//@{ +#define HW_AIPS_MPRA_ADDR(x) (REGS_AIPS_BASE(x) + 0x0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_MPRA(x) (*(__IO hw_aips_mpra_t *) HW_AIPS_MPRA_ADDR(x)) +#define HW_AIPS_MPRA_RD(x) (HW_AIPS_MPRA(x).U) +#define HW_AIPS_MPRA_WR(x, v) (HW_AIPS_MPRA(x).U = (v)) +#define HW_AIPS_MPRA_SET(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) | (v))) +#define HW_AIPS_MPRA_CLR(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) & ~(v))) +#define HW_AIPS_MPRA_TOG(x, v) (HW_AIPS_MPRA_WR(x, HW_AIPS_MPRA_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_MPRA bitfields + */ + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRA - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRA - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * Each PACR register consists of eight 4-bit PACR fields. Each PACR field + * defines the access levels for a particular peripheral. The mapping between a + * peripheral and its PACR field is shown in the table below. The peripheral assignment + * to each PACR is defined by the memory map slot that the peripheral is + * assigned to. See this chip's memory map for the assignment of a particular + * peripheral. The following table shows the location of each peripheral's PACR field in + * the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] + * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 0x24 + * PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC PACR16 + * PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 PACR25 + * PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 + * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 PACR38 + * PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 0x48 + * PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH + * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 PACR65 + * PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 PACR75 + * PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 PACR84 + * PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 PACR94 + * PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 PACR103 + * 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 PACR111 + * 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 0x6C + * PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 + * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR A - D, + * which control peripheral slots 0 - 31, are shown below. The following + * section, PACRPeripheral Access Control Register , shows the register field + * descriptions for PACR E-P. All PACR registers are identical. They are divided into two + * sections because they occupy two non-contiguous address spaces. + */ +typedef union _hw_aips_pacra +{ + uint32_t U; + struct _hw_aips_pacra_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write protect + uint32_t SP4 : 1; //!< [14] Supervisor Protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted protect + uint32_t WP3 : 1; //!< [17] Write Protect + uint32_t SP3 : 1; //!< [18] Supervisor protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted Protect + uint32_t WP2 : 1; //!< [21] Write protect + uint32_t SP2 : 1; //!< [22] Supervisor Protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted Protect + uint32_t WP0 : 1; //!< [29] Write protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacra_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRA register + */ +//@{ +#define HW_AIPS_PACRA_ADDR(x) (REGS_AIPS_BASE(x) + 0x20U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRA(x) (*(__IO hw_aips_pacra_t *) HW_AIPS_PACRA_ADDR(x)) +#define HW_AIPS_PACRA_RD(x) (HW_AIPS_PACRA(x).U) +#define HW_AIPS_PACRA_WR(x, v) (HW_AIPS_PACRA(x).U = (v)) +#define HW_AIPS_PACRA_SET(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) | (v))) +#define HW_AIPS_PACRA_CLR(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) & ~(v))) +#define HW_AIPS_PACRA_TOG(x, v) (HW_AIPS_PACRA_WR(x, HW_AIPS_PACRA_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRA bitfields + */ + +/*! + * @name Register AIPS_PACRA, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP7 (0U) //!< Bit position for AIPS_PACRA_TP7. +#define BM_AIPS_PACRA_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRA_TP7. +#define BS_AIPS_PACRA_TP7 (1U) //!< Bit field size in bits for AIPS_PACRA_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP7 field. +#define BR_AIPS_PACRA_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP7. +#define BF_AIPS_PACRA_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP7), uint32_t) & BM_AIPS_PACRA_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRA_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP7 (1U) //!< Bit position for AIPS_PACRA_WP7. +#define BM_AIPS_PACRA_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRA_WP7. +#define BS_AIPS_PACRA_WP7 (1U) //!< Bit field size in bits for AIPS_PACRA_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP7 field. +#define BR_AIPS_PACRA_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP7. +#define BF_AIPS_PACRA_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP7), uint32_t) & BM_AIPS_PACRA_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRA_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP7 (2U) //!< Bit position for AIPS_PACRA_SP7. +#define BM_AIPS_PACRA_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRA_SP7. +#define BS_AIPS_PACRA_SP7 (1U) //!< Bit field size in bits for AIPS_PACRA_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP7 field. +#define BR_AIPS_PACRA_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP7. +#define BF_AIPS_PACRA_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP7), uint32_t) & BM_AIPS_PACRA_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRA_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP6 (4U) //!< Bit position for AIPS_PACRA_TP6. +#define BM_AIPS_PACRA_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRA_TP6. +#define BS_AIPS_PACRA_TP6 (1U) //!< Bit field size in bits for AIPS_PACRA_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP6 field. +#define BR_AIPS_PACRA_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP6. +#define BF_AIPS_PACRA_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP6), uint32_t) & BM_AIPS_PACRA_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRA_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP6 (5U) //!< Bit position for AIPS_PACRA_WP6. +#define BM_AIPS_PACRA_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRA_WP6. +#define BS_AIPS_PACRA_WP6 (1U) //!< Bit field size in bits for AIPS_PACRA_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP6 field. +#define BR_AIPS_PACRA_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP6. +#define BF_AIPS_PACRA_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP6), uint32_t) & BM_AIPS_PACRA_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRA_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP6 (6U) //!< Bit position for AIPS_PACRA_SP6. +#define BM_AIPS_PACRA_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRA_SP6. +#define BS_AIPS_PACRA_SP6 (1U) //!< Bit field size in bits for AIPS_PACRA_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP6 field. +#define BR_AIPS_PACRA_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP6. +#define BF_AIPS_PACRA_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP6), uint32_t) & BM_AIPS_PACRA_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRA_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP5 (8U) //!< Bit position for AIPS_PACRA_TP5. +#define BM_AIPS_PACRA_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRA_TP5. +#define BS_AIPS_PACRA_TP5 (1U) //!< Bit field size in bits for AIPS_PACRA_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP5 field. +#define BR_AIPS_PACRA_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP5. +#define BF_AIPS_PACRA_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP5), uint32_t) & BM_AIPS_PACRA_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRA_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP5 (9U) //!< Bit position for AIPS_PACRA_WP5. +#define BM_AIPS_PACRA_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRA_WP5. +#define BS_AIPS_PACRA_WP5 (1U) //!< Bit field size in bits for AIPS_PACRA_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP5 field. +#define BR_AIPS_PACRA_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP5. +#define BF_AIPS_PACRA_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP5), uint32_t) & BM_AIPS_PACRA_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRA_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP5 (10U) //!< Bit position for AIPS_PACRA_SP5. +#define BM_AIPS_PACRA_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRA_SP5. +#define BS_AIPS_PACRA_SP5 (1U) //!< Bit field size in bits for AIPS_PACRA_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP5 field. +#define BR_AIPS_PACRA_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP5. +#define BF_AIPS_PACRA_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP5), uint32_t) & BM_AIPS_PACRA_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRA_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP4 (12U) //!< Bit position for AIPS_PACRA_TP4. +#define BM_AIPS_PACRA_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRA_TP4. +#define BS_AIPS_PACRA_TP4 (1U) //!< Bit field size in bits for AIPS_PACRA_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP4 field. +#define BR_AIPS_PACRA_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP4. +#define BF_AIPS_PACRA_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP4), uint32_t) & BM_AIPS_PACRA_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRA_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP4 (13U) //!< Bit position for AIPS_PACRA_WP4. +#define BM_AIPS_PACRA_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRA_WP4. +#define BS_AIPS_PACRA_WP4 (1U) //!< Bit field size in bits for AIPS_PACRA_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP4 field. +#define BR_AIPS_PACRA_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP4. +#define BF_AIPS_PACRA_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP4), uint32_t) & BM_AIPS_PACRA_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRA_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP4 (14U) //!< Bit position for AIPS_PACRA_SP4. +#define BM_AIPS_PACRA_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRA_SP4. +#define BS_AIPS_PACRA_SP4 (1U) //!< Bit field size in bits for AIPS_PACRA_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP4 field. +#define BR_AIPS_PACRA_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP4. +#define BF_AIPS_PACRA_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP4), uint32_t) & BM_AIPS_PACRA_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRA_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP3 (16U) //!< Bit position for AIPS_PACRA_TP3. +#define BM_AIPS_PACRA_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRA_TP3. +#define BS_AIPS_PACRA_TP3 (1U) //!< Bit field size in bits for AIPS_PACRA_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP3 field. +#define BR_AIPS_PACRA_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP3. +#define BF_AIPS_PACRA_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP3), uint32_t) & BM_AIPS_PACRA_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRA_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP3 (17U) //!< Bit position for AIPS_PACRA_WP3. +#define BM_AIPS_PACRA_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRA_WP3. +#define BS_AIPS_PACRA_WP3 (1U) //!< Bit field size in bits for AIPS_PACRA_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP3 field. +#define BR_AIPS_PACRA_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP3. +#define BF_AIPS_PACRA_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP3), uint32_t) & BM_AIPS_PACRA_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRA_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP3 (18U) //!< Bit position for AIPS_PACRA_SP3. +#define BM_AIPS_PACRA_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRA_SP3. +#define BS_AIPS_PACRA_SP3 (1U) //!< Bit field size in bits for AIPS_PACRA_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP3 field. +#define BR_AIPS_PACRA_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP3. +#define BF_AIPS_PACRA_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP3), uint32_t) & BM_AIPS_PACRA_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRA_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP2 (20U) //!< Bit position for AIPS_PACRA_TP2. +#define BM_AIPS_PACRA_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRA_TP2. +#define BS_AIPS_PACRA_TP2 (1U) //!< Bit field size in bits for AIPS_PACRA_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP2 field. +#define BR_AIPS_PACRA_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP2. +#define BF_AIPS_PACRA_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP2), uint32_t) & BM_AIPS_PACRA_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRA_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP2 (21U) //!< Bit position for AIPS_PACRA_WP2. +#define BM_AIPS_PACRA_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRA_WP2. +#define BS_AIPS_PACRA_WP2 (1U) //!< Bit field size in bits for AIPS_PACRA_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP2 field. +#define BR_AIPS_PACRA_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP2. +#define BF_AIPS_PACRA_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP2), uint32_t) & BM_AIPS_PACRA_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRA_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP2 (22U) //!< Bit position for AIPS_PACRA_SP2. +#define BM_AIPS_PACRA_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRA_SP2. +#define BS_AIPS_PACRA_SP2 (1U) //!< Bit field size in bits for AIPS_PACRA_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP2 field. +#define BR_AIPS_PACRA_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP2. +#define BF_AIPS_PACRA_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP2), uint32_t) & BM_AIPS_PACRA_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRA_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP1 (24U) //!< Bit position for AIPS_PACRA_TP1. +#define BM_AIPS_PACRA_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRA_TP1. +#define BS_AIPS_PACRA_TP1 (1U) //!< Bit field size in bits for AIPS_PACRA_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP1 field. +#define BR_AIPS_PACRA_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP1. +#define BF_AIPS_PACRA_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP1), uint32_t) & BM_AIPS_PACRA_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRA_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP1 (25U) //!< Bit position for AIPS_PACRA_WP1. +#define BM_AIPS_PACRA_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRA_WP1. +#define BS_AIPS_PACRA_WP1 (1U) //!< Bit field size in bits for AIPS_PACRA_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP1 field. +#define BR_AIPS_PACRA_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP1. +#define BF_AIPS_PACRA_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP1), uint32_t) & BM_AIPS_PACRA_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRA_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP1 (26U) //!< Bit position for AIPS_PACRA_SP1. +#define BM_AIPS_PACRA_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRA_SP1. +#define BS_AIPS_PACRA_SP1 (1U) //!< Bit field size in bits for AIPS_PACRA_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP1 field. +#define BR_AIPS_PACRA_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP1. +#define BF_AIPS_PACRA_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP1), uint32_t) & BM_AIPS_PACRA_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRA_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRA_TP0 (28U) //!< Bit position for AIPS_PACRA_TP0. +#define BM_AIPS_PACRA_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRA_TP0. +#define BS_AIPS_PACRA_TP0 (1U) //!< Bit field size in bits for AIPS_PACRA_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_TP0 field. +#define BR_AIPS_PACRA_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_TP0. +#define BF_AIPS_PACRA_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_TP0), uint32_t) & BM_AIPS_PACRA_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRA_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRA_WP0 (29U) //!< Bit position for AIPS_PACRA_WP0. +#define BM_AIPS_PACRA_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRA_WP0. +#define BS_AIPS_PACRA_WP0 (1U) //!< Bit field size in bits for AIPS_PACRA_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_WP0 field. +#define BR_AIPS_PACRA_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_WP0. +#define BF_AIPS_PACRA_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_WP0), uint32_t) & BM_AIPS_PACRA_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRA_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRA, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRA_SP0 (30U) //!< Bit position for AIPS_PACRA_SP0. +#define BM_AIPS_PACRA_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRA_SP0. +#define BS_AIPS_PACRA_SP0 (1U) //!< Bit field size in bits for AIPS_PACRA_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRA_SP0 field. +#define BR_AIPS_PACRA_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRA_SP0. +#define BF_AIPS_PACRA_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRA_SP0), uint32_t) & BM_AIPS_PACRA_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRA_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRA_ADDR(x), BP_AIPS_PACRA_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRB - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRB - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * Each PACR register consists of eight 4-bit PACR fields. Each PACR field + * defines the access levels for a particular peripheral. The mapping between a + * peripheral and its PACR field is shown in the table below. The peripheral assignment + * to each PACR is defined by the memory map slot that the peripheral is + * assigned to. See this chip's memory map for the assignment of a particular + * peripheral. The following table shows the location of each peripheral's PACR field in + * the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] + * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 0x24 + * PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC PACR16 + * PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 PACR25 + * PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 + * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 PACR38 + * PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 0x48 + * PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH + * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 PACR65 + * PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 PACR75 + * PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 PACR84 + * PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 PACR94 + * PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 PACR103 + * 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 PACR111 + * 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 0x6C + * PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 + * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR A - D, + * which control peripheral slots 0 - 31, are shown below. The following + * section, PACRPeripheral Access Control Register , shows the register field + * descriptions for PACR E-P. All PACR registers are identical. They are divided into two + * sections because they occupy two non-contiguous address spaces. + */ +typedef union _hw_aips_pacrb +{ + uint32_t U; + struct _hw_aips_pacrb_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write protect + uint32_t SP4 : 1; //!< [14] Supervisor Protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted protect + uint32_t WP3 : 1; //!< [17] Write Protect + uint32_t SP3 : 1; //!< [18] Supervisor protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted Protect + uint32_t WP2 : 1; //!< [21] Write protect + uint32_t SP2 : 1; //!< [22] Supervisor Protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted Protect + uint32_t WP0 : 1; //!< [29] Write protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrb_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRB register + */ +//@{ +#define HW_AIPS_PACRB_ADDR(x) (REGS_AIPS_BASE(x) + 0x24U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRB(x) (*(__IO hw_aips_pacrb_t *) HW_AIPS_PACRB_ADDR(x)) +#define HW_AIPS_PACRB_RD(x) (HW_AIPS_PACRB(x).U) +#define HW_AIPS_PACRB_WR(x, v) (HW_AIPS_PACRB(x).U = (v)) +#define HW_AIPS_PACRB_SET(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) | (v))) +#define HW_AIPS_PACRB_CLR(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) & ~(v))) +#define HW_AIPS_PACRB_TOG(x, v) (HW_AIPS_PACRB_WR(x, HW_AIPS_PACRB_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRB bitfields + */ + +/*! + * @name Register AIPS_PACRB, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP7 (0U) //!< Bit position for AIPS_PACRB_TP7. +#define BM_AIPS_PACRB_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRB_TP7. +#define BS_AIPS_PACRB_TP7 (1U) //!< Bit field size in bits for AIPS_PACRB_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP7 field. +#define BR_AIPS_PACRB_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP7. +#define BF_AIPS_PACRB_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP7), uint32_t) & BM_AIPS_PACRB_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRB_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP7 (1U) //!< Bit position for AIPS_PACRB_WP7. +#define BM_AIPS_PACRB_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRB_WP7. +#define BS_AIPS_PACRB_WP7 (1U) //!< Bit field size in bits for AIPS_PACRB_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP7 field. +#define BR_AIPS_PACRB_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP7. +#define BF_AIPS_PACRB_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP7), uint32_t) & BM_AIPS_PACRB_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRB_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP7 (2U) //!< Bit position for AIPS_PACRB_SP7. +#define BM_AIPS_PACRB_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRB_SP7. +#define BS_AIPS_PACRB_SP7 (1U) //!< Bit field size in bits for AIPS_PACRB_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP7 field. +#define BR_AIPS_PACRB_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP7. +#define BF_AIPS_PACRB_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP7), uint32_t) & BM_AIPS_PACRB_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRB_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP6 (4U) //!< Bit position for AIPS_PACRB_TP6. +#define BM_AIPS_PACRB_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRB_TP6. +#define BS_AIPS_PACRB_TP6 (1U) //!< Bit field size in bits for AIPS_PACRB_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP6 field. +#define BR_AIPS_PACRB_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP6. +#define BF_AIPS_PACRB_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP6), uint32_t) & BM_AIPS_PACRB_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRB_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP6 (5U) //!< Bit position for AIPS_PACRB_WP6. +#define BM_AIPS_PACRB_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRB_WP6. +#define BS_AIPS_PACRB_WP6 (1U) //!< Bit field size in bits for AIPS_PACRB_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP6 field. +#define BR_AIPS_PACRB_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP6. +#define BF_AIPS_PACRB_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP6), uint32_t) & BM_AIPS_PACRB_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRB_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP6 (6U) //!< Bit position for AIPS_PACRB_SP6. +#define BM_AIPS_PACRB_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRB_SP6. +#define BS_AIPS_PACRB_SP6 (1U) //!< Bit field size in bits for AIPS_PACRB_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP6 field. +#define BR_AIPS_PACRB_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP6. +#define BF_AIPS_PACRB_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP6), uint32_t) & BM_AIPS_PACRB_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRB_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP5 (8U) //!< Bit position for AIPS_PACRB_TP5. +#define BM_AIPS_PACRB_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRB_TP5. +#define BS_AIPS_PACRB_TP5 (1U) //!< Bit field size in bits for AIPS_PACRB_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP5 field. +#define BR_AIPS_PACRB_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP5. +#define BF_AIPS_PACRB_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP5), uint32_t) & BM_AIPS_PACRB_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRB_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP5 (9U) //!< Bit position for AIPS_PACRB_WP5. +#define BM_AIPS_PACRB_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRB_WP5. +#define BS_AIPS_PACRB_WP5 (1U) //!< Bit field size in bits for AIPS_PACRB_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP5 field. +#define BR_AIPS_PACRB_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP5. +#define BF_AIPS_PACRB_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP5), uint32_t) & BM_AIPS_PACRB_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRB_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP5 (10U) //!< Bit position for AIPS_PACRB_SP5. +#define BM_AIPS_PACRB_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRB_SP5. +#define BS_AIPS_PACRB_SP5 (1U) //!< Bit field size in bits for AIPS_PACRB_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP5 field. +#define BR_AIPS_PACRB_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP5. +#define BF_AIPS_PACRB_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP5), uint32_t) & BM_AIPS_PACRB_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRB_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP4 (12U) //!< Bit position for AIPS_PACRB_TP4. +#define BM_AIPS_PACRB_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRB_TP4. +#define BS_AIPS_PACRB_TP4 (1U) //!< Bit field size in bits for AIPS_PACRB_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP4 field. +#define BR_AIPS_PACRB_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP4. +#define BF_AIPS_PACRB_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP4), uint32_t) & BM_AIPS_PACRB_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRB_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP4 (13U) //!< Bit position for AIPS_PACRB_WP4. +#define BM_AIPS_PACRB_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRB_WP4. +#define BS_AIPS_PACRB_WP4 (1U) //!< Bit field size in bits for AIPS_PACRB_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP4 field. +#define BR_AIPS_PACRB_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP4. +#define BF_AIPS_PACRB_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP4), uint32_t) & BM_AIPS_PACRB_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRB_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP4 (14U) //!< Bit position for AIPS_PACRB_SP4. +#define BM_AIPS_PACRB_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRB_SP4. +#define BS_AIPS_PACRB_SP4 (1U) //!< Bit field size in bits for AIPS_PACRB_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP4 field. +#define BR_AIPS_PACRB_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP4. +#define BF_AIPS_PACRB_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP4), uint32_t) & BM_AIPS_PACRB_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRB_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP3 (16U) //!< Bit position for AIPS_PACRB_TP3. +#define BM_AIPS_PACRB_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRB_TP3. +#define BS_AIPS_PACRB_TP3 (1U) //!< Bit field size in bits for AIPS_PACRB_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP3 field. +#define BR_AIPS_PACRB_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP3. +#define BF_AIPS_PACRB_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP3), uint32_t) & BM_AIPS_PACRB_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRB_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP3 (17U) //!< Bit position for AIPS_PACRB_WP3. +#define BM_AIPS_PACRB_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRB_WP3. +#define BS_AIPS_PACRB_WP3 (1U) //!< Bit field size in bits for AIPS_PACRB_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP3 field. +#define BR_AIPS_PACRB_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP3. +#define BF_AIPS_PACRB_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP3), uint32_t) & BM_AIPS_PACRB_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRB_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP3 (18U) //!< Bit position for AIPS_PACRB_SP3. +#define BM_AIPS_PACRB_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRB_SP3. +#define BS_AIPS_PACRB_SP3 (1U) //!< Bit field size in bits for AIPS_PACRB_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP3 field. +#define BR_AIPS_PACRB_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP3. +#define BF_AIPS_PACRB_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP3), uint32_t) & BM_AIPS_PACRB_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRB_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP2 (20U) //!< Bit position for AIPS_PACRB_TP2. +#define BM_AIPS_PACRB_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRB_TP2. +#define BS_AIPS_PACRB_TP2 (1U) //!< Bit field size in bits for AIPS_PACRB_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP2 field. +#define BR_AIPS_PACRB_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP2. +#define BF_AIPS_PACRB_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP2), uint32_t) & BM_AIPS_PACRB_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRB_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP2 (21U) //!< Bit position for AIPS_PACRB_WP2. +#define BM_AIPS_PACRB_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRB_WP2. +#define BS_AIPS_PACRB_WP2 (1U) //!< Bit field size in bits for AIPS_PACRB_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP2 field. +#define BR_AIPS_PACRB_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP2. +#define BF_AIPS_PACRB_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP2), uint32_t) & BM_AIPS_PACRB_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRB_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP2 (22U) //!< Bit position for AIPS_PACRB_SP2. +#define BM_AIPS_PACRB_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRB_SP2. +#define BS_AIPS_PACRB_SP2 (1U) //!< Bit field size in bits for AIPS_PACRB_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP2 field. +#define BR_AIPS_PACRB_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP2. +#define BF_AIPS_PACRB_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP2), uint32_t) & BM_AIPS_PACRB_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRB_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP1 (24U) //!< Bit position for AIPS_PACRB_TP1. +#define BM_AIPS_PACRB_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRB_TP1. +#define BS_AIPS_PACRB_TP1 (1U) //!< Bit field size in bits for AIPS_PACRB_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP1 field. +#define BR_AIPS_PACRB_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP1. +#define BF_AIPS_PACRB_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP1), uint32_t) & BM_AIPS_PACRB_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRB_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP1 (25U) //!< Bit position for AIPS_PACRB_WP1. +#define BM_AIPS_PACRB_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRB_WP1. +#define BS_AIPS_PACRB_WP1 (1U) //!< Bit field size in bits for AIPS_PACRB_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP1 field. +#define BR_AIPS_PACRB_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP1. +#define BF_AIPS_PACRB_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP1), uint32_t) & BM_AIPS_PACRB_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRB_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP1 (26U) //!< Bit position for AIPS_PACRB_SP1. +#define BM_AIPS_PACRB_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRB_SP1. +#define BS_AIPS_PACRB_SP1 (1U) //!< Bit field size in bits for AIPS_PACRB_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP1 field. +#define BR_AIPS_PACRB_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP1. +#define BF_AIPS_PACRB_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP1), uint32_t) & BM_AIPS_PACRB_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRB_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRB_TP0 (28U) //!< Bit position for AIPS_PACRB_TP0. +#define BM_AIPS_PACRB_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRB_TP0. +#define BS_AIPS_PACRB_TP0 (1U) //!< Bit field size in bits for AIPS_PACRB_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_TP0 field. +#define BR_AIPS_PACRB_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_TP0. +#define BF_AIPS_PACRB_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_TP0), uint32_t) & BM_AIPS_PACRB_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRB_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRB_WP0 (29U) //!< Bit position for AIPS_PACRB_WP0. +#define BM_AIPS_PACRB_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRB_WP0. +#define BS_AIPS_PACRB_WP0 (1U) //!< Bit field size in bits for AIPS_PACRB_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_WP0 field. +#define BR_AIPS_PACRB_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_WP0. +#define BF_AIPS_PACRB_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_WP0), uint32_t) & BM_AIPS_PACRB_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRB_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRB, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRB_SP0 (30U) //!< Bit position for AIPS_PACRB_SP0. +#define BM_AIPS_PACRB_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRB_SP0. +#define BS_AIPS_PACRB_SP0 (1U) //!< Bit field size in bits for AIPS_PACRB_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRB_SP0 field. +#define BR_AIPS_PACRB_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRB_SP0. +#define BF_AIPS_PACRB_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRB_SP0), uint32_t) & BM_AIPS_PACRB_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRB_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRB_ADDR(x), BP_AIPS_PACRB_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRC - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRC - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * Each PACR register consists of eight 4-bit PACR fields. Each PACR field + * defines the access levels for a particular peripheral. The mapping between a + * peripheral and its PACR field is shown in the table below. The peripheral assignment + * to each PACR is defined by the memory map slot that the peripheral is + * assigned to. See this chip's memory map for the assignment of a particular + * peripheral. The following table shows the location of each peripheral's PACR field in + * the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] + * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 0x24 + * PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC PACR16 + * PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 PACR25 + * PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 + * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 PACR38 + * PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 0x48 + * PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH + * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 PACR65 + * PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 PACR75 + * PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 PACR84 + * PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 PACR94 + * PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 PACR103 + * 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 PACR111 + * 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 0x6C + * PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 + * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR A - D, + * which control peripheral slots 0 - 31, are shown below. The following + * section, PACRPeripheral Access Control Register , shows the register field + * descriptions for PACR E-P. All PACR registers are identical. They are divided into two + * sections because they occupy two non-contiguous address spaces. + */ +typedef union _hw_aips_pacrc +{ + uint32_t U; + struct _hw_aips_pacrc_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write protect + uint32_t SP4 : 1; //!< [14] Supervisor Protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted protect + uint32_t WP3 : 1; //!< [17] Write Protect + uint32_t SP3 : 1; //!< [18] Supervisor protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted Protect + uint32_t WP2 : 1; //!< [21] Write protect + uint32_t SP2 : 1; //!< [22] Supervisor Protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted Protect + uint32_t WP0 : 1; //!< [29] Write protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrc_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRC register + */ +//@{ +#define HW_AIPS_PACRC_ADDR(x) (REGS_AIPS_BASE(x) + 0x28U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRC(x) (*(__IO hw_aips_pacrc_t *) HW_AIPS_PACRC_ADDR(x)) +#define HW_AIPS_PACRC_RD(x) (HW_AIPS_PACRC(x).U) +#define HW_AIPS_PACRC_WR(x, v) (HW_AIPS_PACRC(x).U = (v)) +#define HW_AIPS_PACRC_SET(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) | (v))) +#define HW_AIPS_PACRC_CLR(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) & ~(v))) +#define HW_AIPS_PACRC_TOG(x, v) (HW_AIPS_PACRC_WR(x, HW_AIPS_PACRC_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRC bitfields + */ + +/*! + * @name Register AIPS_PACRC, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP7 (0U) //!< Bit position for AIPS_PACRC_TP7. +#define BM_AIPS_PACRC_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRC_TP7. +#define BS_AIPS_PACRC_TP7 (1U) //!< Bit field size in bits for AIPS_PACRC_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP7 field. +#define BR_AIPS_PACRC_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP7. +#define BF_AIPS_PACRC_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP7), uint32_t) & BM_AIPS_PACRC_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRC_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP7 (1U) //!< Bit position for AIPS_PACRC_WP7. +#define BM_AIPS_PACRC_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRC_WP7. +#define BS_AIPS_PACRC_WP7 (1U) //!< Bit field size in bits for AIPS_PACRC_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP7 field. +#define BR_AIPS_PACRC_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP7. +#define BF_AIPS_PACRC_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP7), uint32_t) & BM_AIPS_PACRC_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRC_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP7 (2U) //!< Bit position for AIPS_PACRC_SP7. +#define BM_AIPS_PACRC_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRC_SP7. +#define BS_AIPS_PACRC_SP7 (1U) //!< Bit field size in bits for AIPS_PACRC_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP7 field. +#define BR_AIPS_PACRC_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP7. +#define BF_AIPS_PACRC_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP7), uint32_t) & BM_AIPS_PACRC_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRC_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP6 (4U) //!< Bit position for AIPS_PACRC_TP6. +#define BM_AIPS_PACRC_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRC_TP6. +#define BS_AIPS_PACRC_TP6 (1U) //!< Bit field size in bits for AIPS_PACRC_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP6 field. +#define BR_AIPS_PACRC_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP6. +#define BF_AIPS_PACRC_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP6), uint32_t) & BM_AIPS_PACRC_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRC_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP6 (5U) //!< Bit position for AIPS_PACRC_WP6. +#define BM_AIPS_PACRC_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRC_WP6. +#define BS_AIPS_PACRC_WP6 (1U) //!< Bit field size in bits for AIPS_PACRC_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP6 field. +#define BR_AIPS_PACRC_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP6. +#define BF_AIPS_PACRC_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP6), uint32_t) & BM_AIPS_PACRC_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRC_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP6 (6U) //!< Bit position for AIPS_PACRC_SP6. +#define BM_AIPS_PACRC_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRC_SP6. +#define BS_AIPS_PACRC_SP6 (1U) //!< Bit field size in bits for AIPS_PACRC_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP6 field. +#define BR_AIPS_PACRC_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP6. +#define BF_AIPS_PACRC_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP6), uint32_t) & BM_AIPS_PACRC_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRC_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP5 (8U) //!< Bit position for AIPS_PACRC_TP5. +#define BM_AIPS_PACRC_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRC_TP5. +#define BS_AIPS_PACRC_TP5 (1U) //!< Bit field size in bits for AIPS_PACRC_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP5 field. +#define BR_AIPS_PACRC_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP5. +#define BF_AIPS_PACRC_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP5), uint32_t) & BM_AIPS_PACRC_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRC_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP5 (9U) //!< Bit position for AIPS_PACRC_WP5. +#define BM_AIPS_PACRC_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRC_WP5. +#define BS_AIPS_PACRC_WP5 (1U) //!< Bit field size in bits for AIPS_PACRC_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP5 field. +#define BR_AIPS_PACRC_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP5. +#define BF_AIPS_PACRC_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP5), uint32_t) & BM_AIPS_PACRC_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRC_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP5 (10U) //!< Bit position for AIPS_PACRC_SP5. +#define BM_AIPS_PACRC_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRC_SP5. +#define BS_AIPS_PACRC_SP5 (1U) //!< Bit field size in bits for AIPS_PACRC_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP5 field. +#define BR_AIPS_PACRC_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP5. +#define BF_AIPS_PACRC_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP5), uint32_t) & BM_AIPS_PACRC_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRC_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP4 (12U) //!< Bit position for AIPS_PACRC_TP4. +#define BM_AIPS_PACRC_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRC_TP4. +#define BS_AIPS_PACRC_TP4 (1U) //!< Bit field size in bits for AIPS_PACRC_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP4 field. +#define BR_AIPS_PACRC_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP4. +#define BF_AIPS_PACRC_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP4), uint32_t) & BM_AIPS_PACRC_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRC_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP4 (13U) //!< Bit position for AIPS_PACRC_WP4. +#define BM_AIPS_PACRC_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRC_WP4. +#define BS_AIPS_PACRC_WP4 (1U) //!< Bit field size in bits for AIPS_PACRC_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP4 field. +#define BR_AIPS_PACRC_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP4. +#define BF_AIPS_PACRC_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP4), uint32_t) & BM_AIPS_PACRC_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRC_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP4 (14U) //!< Bit position for AIPS_PACRC_SP4. +#define BM_AIPS_PACRC_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRC_SP4. +#define BS_AIPS_PACRC_SP4 (1U) //!< Bit field size in bits for AIPS_PACRC_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP4 field. +#define BR_AIPS_PACRC_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP4. +#define BF_AIPS_PACRC_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP4), uint32_t) & BM_AIPS_PACRC_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRC_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP3 (16U) //!< Bit position for AIPS_PACRC_TP3. +#define BM_AIPS_PACRC_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRC_TP3. +#define BS_AIPS_PACRC_TP3 (1U) //!< Bit field size in bits for AIPS_PACRC_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP3 field. +#define BR_AIPS_PACRC_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP3. +#define BF_AIPS_PACRC_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP3), uint32_t) & BM_AIPS_PACRC_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRC_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP3 (17U) //!< Bit position for AIPS_PACRC_WP3. +#define BM_AIPS_PACRC_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRC_WP3. +#define BS_AIPS_PACRC_WP3 (1U) //!< Bit field size in bits for AIPS_PACRC_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP3 field. +#define BR_AIPS_PACRC_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP3. +#define BF_AIPS_PACRC_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP3), uint32_t) & BM_AIPS_PACRC_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRC_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP3 (18U) //!< Bit position for AIPS_PACRC_SP3. +#define BM_AIPS_PACRC_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRC_SP3. +#define BS_AIPS_PACRC_SP3 (1U) //!< Bit field size in bits for AIPS_PACRC_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP3 field. +#define BR_AIPS_PACRC_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP3. +#define BF_AIPS_PACRC_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP3), uint32_t) & BM_AIPS_PACRC_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRC_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP2 (20U) //!< Bit position for AIPS_PACRC_TP2. +#define BM_AIPS_PACRC_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRC_TP2. +#define BS_AIPS_PACRC_TP2 (1U) //!< Bit field size in bits for AIPS_PACRC_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP2 field. +#define BR_AIPS_PACRC_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP2. +#define BF_AIPS_PACRC_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP2), uint32_t) & BM_AIPS_PACRC_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRC_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP2 (21U) //!< Bit position for AIPS_PACRC_WP2. +#define BM_AIPS_PACRC_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRC_WP2. +#define BS_AIPS_PACRC_WP2 (1U) //!< Bit field size in bits for AIPS_PACRC_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP2 field. +#define BR_AIPS_PACRC_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP2. +#define BF_AIPS_PACRC_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP2), uint32_t) & BM_AIPS_PACRC_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRC_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP2 (22U) //!< Bit position for AIPS_PACRC_SP2. +#define BM_AIPS_PACRC_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRC_SP2. +#define BS_AIPS_PACRC_SP2 (1U) //!< Bit field size in bits for AIPS_PACRC_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP2 field. +#define BR_AIPS_PACRC_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP2. +#define BF_AIPS_PACRC_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP2), uint32_t) & BM_AIPS_PACRC_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRC_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP1 (24U) //!< Bit position for AIPS_PACRC_TP1. +#define BM_AIPS_PACRC_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRC_TP1. +#define BS_AIPS_PACRC_TP1 (1U) //!< Bit field size in bits for AIPS_PACRC_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP1 field. +#define BR_AIPS_PACRC_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP1. +#define BF_AIPS_PACRC_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP1), uint32_t) & BM_AIPS_PACRC_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRC_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP1 (25U) //!< Bit position for AIPS_PACRC_WP1. +#define BM_AIPS_PACRC_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRC_WP1. +#define BS_AIPS_PACRC_WP1 (1U) //!< Bit field size in bits for AIPS_PACRC_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP1 field. +#define BR_AIPS_PACRC_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP1. +#define BF_AIPS_PACRC_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP1), uint32_t) & BM_AIPS_PACRC_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRC_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP1 (26U) //!< Bit position for AIPS_PACRC_SP1. +#define BM_AIPS_PACRC_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRC_SP1. +#define BS_AIPS_PACRC_SP1 (1U) //!< Bit field size in bits for AIPS_PACRC_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP1 field. +#define BR_AIPS_PACRC_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP1. +#define BF_AIPS_PACRC_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP1), uint32_t) & BM_AIPS_PACRC_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRC_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRC_TP0 (28U) //!< Bit position for AIPS_PACRC_TP0. +#define BM_AIPS_PACRC_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRC_TP0. +#define BS_AIPS_PACRC_TP0 (1U) //!< Bit field size in bits for AIPS_PACRC_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_TP0 field. +#define BR_AIPS_PACRC_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_TP0. +#define BF_AIPS_PACRC_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_TP0), uint32_t) & BM_AIPS_PACRC_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRC_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRC_WP0 (29U) //!< Bit position for AIPS_PACRC_WP0. +#define BM_AIPS_PACRC_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRC_WP0. +#define BS_AIPS_PACRC_WP0 (1U) //!< Bit field size in bits for AIPS_PACRC_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_WP0 field. +#define BR_AIPS_PACRC_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_WP0. +#define BF_AIPS_PACRC_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_WP0), uint32_t) & BM_AIPS_PACRC_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRC_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRC, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRC_SP0 (30U) //!< Bit position for AIPS_PACRC_SP0. +#define BM_AIPS_PACRC_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRC_SP0. +#define BS_AIPS_PACRC_SP0 (1U) //!< Bit field size in bits for AIPS_PACRC_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRC_SP0 field. +#define BR_AIPS_PACRC_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRC_SP0. +#define BF_AIPS_PACRC_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRC_SP0), uint32_t) & BM_AIPS_PACRC_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRC_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRC_ADDR(x), BP_AIPS_PACRC_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRD - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRD - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * Each PACR register consists of eight 4-bit PACR fields. Each PACR field + * defines the access levels for a particular peripheral. The mapping between a + * peripheral and its PACR field is shown in the table below. The peripheral assignment + * to each PACR is defined by the memory map slot that the peripheral is + * assigned to. See this chip's memory map for the assignment of a particular + * peripheral. The following table shows the location of each peripheral's PACR field in + * the PACR registers. Offset Register [31:28] [27:24] [23:20] [19:16] [15:12] + * [11:8] [7:4] [3:0] 0x20 PACRA PACR0 PACR1 PACR2 PACR3 PACR4 PACR5 PACR6 PACR7 0x24 + * PACRB PACR8 PACR9 PACR10 PACR11 PACR12 PACR13 PACR14 PACR15 0x28 PACRC PACR16 + * PACR17 PACR18 PACR19 PACR20 PACR21 PACR22 PACR23 0x2C PACRD PACR24 PACR25 + * PACR26 PACR27 PACR28 PACR29 PACR30 PACR31 0x30 Reserved 0x34 Reserved 0x38 + * Reserved 0x3C Reserved 0x40 PACRE PACR32 PACR33 PACR34 PACR35 PACR36 PACR37 PACR38 + * PACR39 0x44 PACRF PACR40 PACR41 PACR42 PACR43 PACR44 PACR45 PACR46 PACR47 0x48 + * PACRG PACR48 PACR49 PACR50 PACR51 PACR52 PACR53 PACR54 PACR55 0x4C PACRH + * PACR56 PACR57 PACR58 PACR59 PACR60 PACR61 PACR62 PACR63 0x50 PACRI PACR64 PACR65 + * PACR66 PACR67 PACR68 PACR69 PACR70 PACR71 0x54 PACRJ PACR72 PACR73 PACR74 PACR75 + * PACR76 PACR77 PACR78 PACR79 0x58 PACRK PACR80 PACR81 PACR82 PACR83 PACR84 + * PACR85 PACR86 PACR87 0x5C PACRL PACR88 PACR89 PACR90 PACR91 PACR92 PACR93 PACR94 + * PACR95 0x60 PACRM PACR96 PACR97 PACR98 PACR99 PACR100 PACR101 PACR102 PACR103 + * 0x64 PACRN PACR104 PACR105 PACR106 PACR107 PACR108 PACR109 PACR110 PACR111 + * 0x68 PACRO PACR112 PACR113 PACR114 PACR115 PACR116 PACR117 PACR118 PACR119 0x6C + * PACRP PACR120 PACR121 PACR122 PACR123 PACR124 PACR125 PACR126 PACR127 0x80 + * PACRU PACR GBL0 PACR GBL1 Reserved The register field descriptions for PACR A - D, + * which control peripheral slots 0 - 31, are shown below. The following + * section, PACRPeripheral Access Control Register , shows the register field + * descriptions for PACR E-P. All PACR registers are identical. They are divided into two + * sections because they occupy two non-contiguous address spaces. + */ +typedef union _hw_aips_pacrd +{ + uint32_t U; + struct _hw_aips_pacrd_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write protect + uint32_t SP4 : 1; //!< [14] Supervisor Protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted protect + uint32_t WP3 : 1; //!< [17] Write Protect + uint32_t SP3 : 1; //!< [18] Supervisor protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted Protect + uint32_t WP2 : 1; //!< [21] Write protect + uint32_t SP2 : 1; //!< [22] Supervisor Protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted Protect + uint32_t WP0 : 1; //!< [29] Write protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrd_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRD register + */ +//@{ +#define HW_AIPS_PACRD_ADDR(x) (REGS_AIPS_BASE(x) + 0x2CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRD(x) (*(__IO hw_aips_pacrd_t *) HW_AIPS_PACRD_ADDR(x)) +#define HW_AIPS_PACRD_RD(x) (HW_AIPS_PACRD(x).U) +#define HW_AIPS_PACRD_WR(x, v) (HW_AIPS_PACRD(x).U = (v)) +#define HW_AIPS_PACRD_SET(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) | (v))) +#define HW_AIPS_PACRD_CLR(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) & ~(v))) +#define HW_AIPS_PACRD_TOG(x, v) (HW_AIPS_PACRD_WR(x, HW_AIPS_PACRD_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRD bitfields + */ + +/*! + * @name Register AIPS_PACRD, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP7 (0U) //!< Bit position for AIPS_PACRD_TP7. +#define BM_AIPS_PACRD_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRD_TP7. +#define BS_AIPS_PACRD_TP7 (1U) //!< Bit field size in bits for AIPS_PACRD_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP7 field. +#define BR_AIPS_PACRD_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP7. +#define BF_AIPS_PACRD_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP7), uint32_t) & BM_AIPS_PACRD_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRD_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP7 (1U) //!< Bit position for AIPS_PACRD_WP7. +#define BM_AIPS_PACRD_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRD_WP7. +#define BS_AIPS_PACRD_WP7 (1U) //!< Bit field size in bits for AIPS_PACRD_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP7 field. +#define BR_AIPS_PACRD_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP7. +#define BF_AIPS_PACRD_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP7), uint32_t) & BM_AIPS_PACRD_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRD_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP7 (2U) //!< Bit position for AIPS_PACRD_SP7. +#define BM_AIPS_PACRD_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRD_SP7. +#define BS_AIPS_PACRD_SP7 (1U) //!< Bit field size in bits for AIPS_PACRD_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP7 field. +#define BR_AIPS_PACRD_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP7. +#define BF_AIPS_PACRD_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP7), uint32_t) & BM_AIPS_PACRD_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRD_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP6 (4U) //!< Bit position for AIPS_PACRD_TP6. +#define BM_AIPS_PACRD_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRD_TP6. +#define BS_AIPS_PACRD_TP6 (1U) //!< Bit field size in bits for AIPS_PACRD_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP6 field. +#define BR_AIPS_PACRD_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP6. +#define BF_AIPS_PACRD_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP6), uint32_t) & BM_AIPS_PACRD_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRD_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP6 (5U) //!< Bit position for AIPS_PACRD_WP6. +#define BM_AIPS_PACRD_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRD_WP6. +#define BS_AIPS_PACRD_WP6 (1U) //!< Bit field size in bits for AIPS_PACRD_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP6 field. +#define BR_AIPS_PACRD_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP6. +#define BF_AIPS_PACRD_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP6), uint32_t) & BM_AIPS_PACRD_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRD_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP6 (6U) //!< Bit position for AIPS_PACRD_SP6. +#define BM_AIPS_PACRD_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRD_SP6. +#define BS_AIPS_PACRD_SP6 (1U) //!< Bit field size in bits for AIPS_PACRD_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP6 field. +#define BR_AIPS_PACRD_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP6. +#define BF_AIPS_PACRD_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP6), uint32_t) & BM_AIPS_PACRD_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRD_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP5 (8U) //!< Bit position for AIPS_PACRD_TP5. +#define BM_AIPS_PACRD_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRD_TP5. +#define BS_AIPS_PACRD_TP5 (1U) //!< Bit field size in bits for AIPS_PACRD_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP5 field. +#define BR_AIPS_PACRD_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP5. +#define BF_AIPS_PACRD_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP5), uint32_t) & BM_AIPS_PACRD_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRD_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP5 (9U) //!< Bit position for AIPS_PACRD_WP5. +#define BM_AIPS_PACRD_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRD_WP5. +#define BS_AIPS_PACRD_WP5 (1U) //!< Bit field size in bits for AIPS_PACRD_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP5 field. +#define BR_AIPS_PACRD_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP5. +#define BF_AIPS_PACRD_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP5), uint32_t) & BM_AIPS_PACRD_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRD_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP5 (10U) //!< Bit position for AIPS_PACRD_SP5. +#define BM_AIPS_PACRD_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRD_SP5. +#define BS_AIPS_PACRD_SP5 (1U) //!< Bit field size in bits for AIPS_PACRD_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP5 field. +#define BR_AIPS_PACRD_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP5. +#define BF_AIPS_PACRD_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP5), uint32_t) & BM_AIPS_PACRD_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRD_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP4 (12U) //!< Bit position for AIPS_PACRD_TP4. +#define BM_AIPS_PACRD_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRD_TP4. +#define BS_AIPS_PACRD_TP4 (1U) //!< Bit field size in bits for AIPS_PACRD_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP4 field. +#define BR_AIPS_PACRD_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP4. +#define BF_AIPS_PACRD_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP4), uint32_t) & BM_AIPS_PACRD_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRD_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP4 (13U) //!< Bit position for AIPS_PACRD_WP4. +#define BM_AIPS_PACRD_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRD_WP4. +#define BS_AIPS_PACRD_WP4 (1U) //!< Bit field size in bits for AIPS_PACRD_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP4 field. +#define BR_AIPS_PACRD_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP4. +#define BF_AIPS_PACRD_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP4), uint32_t) & BM_AIPS_PACRD_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRD_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP4 (14U) //!< Bit position for AIPS_PACRD_SP4. +#define BM_AIPS_PACRD_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRD_SP4. +#define BS_AIPS_PACRD_SP4 (1U) //!< Bit field size in bits for AIPS_PACRD_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP4 field. +#define BR_AIPS_PACRD_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP4. +#define BF_AIPS_PACRD_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP4), uint32_t) & BM_AIPS_PACRD_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRD_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP3 (16U) //!< Bit position for AIPS_PACRD_TP3. +#define BM_AIPS_PACRD_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRD_TP3. +#define BS_AIPS_PACRD_TP3 (1U) //!< Bit field size in bits for AIPS_PACRD_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP3 field. +#define BR_AIPS_PACRD_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP3. +#define BF_AIPS_PACRD_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP3), uint32_t) & BM_AIPS_PACRD_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRD_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP3 (17U) //!< Bit position for AIPS_PACRD_WP3. +#define BM_AIPS_PACRD_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRD_WP3. +#define BS_AIPS_PACRD_WP3 (1U) //!< Bit field size in bits for AIPS_PACRD_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP3 field. +#define BR_AIPS_PACRD_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP3. +#define BF_AIPS_PACRD_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP3), uint32_t) & BM_AIPS_PACRD_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRD_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP3 (18U) //!< Bit position for AIPS_PACRD_SP3. +#define BM_AIPS_PACRD_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRD_SP3. +#define BS_AIPS_PACRD_SP3 (1U) //!< Bit field size in bits for AIPS_PACRD_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP3 field. +#define BR_AIPS_PACRD_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP3. +#define BF_AIPS_PACRD_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP3), uint32_t) & BM_AIPS_PACRD_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRD_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP2 (20U) //!< Bit position for AIPS_PACRD_TP2. +#define BM_AIPS_PACRD_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRD_TP2. +#define BS_AIPS_PACRD_TP2 (1U) //!< Bit field size in bits for AIPS_PACRD_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP2 field. +#define BR_AIPS_PACRD_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP2. +#define BF_AIPS_PACRD_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP2), uint32_t) & BM_AIPS_PACRD_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRD_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP2 (21U) //!< Bit position for AIPS_PACRD_WP2. +#define BM_AIPS_PACRD_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRD_WP2. +#define BS_AIPS_PACRD_WP2 (1U) //!< Bit field size in bits for AIPS_PACRD_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP2 field. +#define BR_AIPS_PACRD_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP2. +#define BF_AIPS_PACRD_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP2), uint32_t) & BM_AIPS_PACRD_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRD_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP2 (22U) //!< Bit position for AIPS_PACRD_SP2. +#define BM_AIPS_PACRD_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRD_SP2. +#define BS_AIPS_PACRD_SP2 (1U) //!< Bit field size in bits for AIPS_PACRD_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP2 field. +#define BR_AIPS_PACRD_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP2. +#define BF_AIPS_PACRD_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP2), uint32_t) & BM_AIPS_PACRD_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRD_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP1 (24U) //!< Bit position for AIPS_PACRD_TP1. +#define BM_AIPS_PACRD_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRD_TP1. +#define BS_AIPS_PACRD_TP1 (1U) //!< Bit field size in bits for AIPS_PACRD_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP1 field. +#define BR_AIPS_PACRD_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP1. +#define BF_AIPS_PACRD_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP1), uint32_t) & BM_AIPS_PACRD_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRD_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP1 (25U) //!< Bit position for AIPS_PACRD_WP1. +#define BM_AIPS_PACRD_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRD_WP1. +#define BS_AIPS_PACRD_WP1 (1U) //!< Bit field size in bits for AIPS_PACRD_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP1 field. +#define BR_AIPS_PACRD_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP1. +#define BF_AIPS_PACRD_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP1), uint32_t) & BM_AIPS_PACRD_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRD_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP1 (26U) //!< Bit position for AIPS_PACRD_SP1. +#define BM_AIPS_PACRD_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRD_SP1. +#define BS_AIPS_PACRD_SP1 (1U) //!< Bit field size in bits for AIPS_PACRD_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP1 field. +#define BR_AIPS_PACRD_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP1. +#define BF_AIPS_PACRD_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP1), uint32_t) & BM_AIPS_PACRD_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRD_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRD_TP0 (28U) //!< Bit position for AIPS_PACRD_TP0. +#define BM_AIPS_PACRD_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRD_TP0. +#define BS_AIPS_PACRD_TP0 (1U) //!< Bit field size in bits for AIPS_PACRD_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_TP0 field. +#define BR_AIPS_PACRD_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_TP0. +#define BF_AIPS_PACRD_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_TP0), uint32_t) & BM_AIPS_PACRD_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRD_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRD_WP0 (29U) //!< Bit position for AIPS_PACRD_WP0. +#define BM_AIPS_PACRD_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRD_WP0. +#define BS_AIPS_PACRD_WP0 (1U) //!< Bit field size in bits for AIPS_PACRD_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_WP0 field. +#define BR_AIPS_PACRD_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_WP0. +#define BF_AIPS_PACRD_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_WP0), uint32_t) & BM_AIPS_PACRD_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRD_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRD, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRD_SP0 (30U) //!< Bit position for AIPS_PACRD_SP0. +#define BM_AIPS_PACRD_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRD_SP0. +#define BS_AIPS_PACRD_SP0 (1U) //!< Bit field size in bits for AIPS_PACRD_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRD_SP0 field. +#define BR_AIPS_PACRD_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRD_SP0. +#define BF_AIPS_PACRD_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRD_SP0), uint32_t) & BM_AIPS_PACRD_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRD_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRD_ADDR(x), BP_AIPS_PACRD_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRE - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRE - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacre +{ + uint32_t U; + struct _hw_aips_pacre_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacre_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRE register + */ +//@{ +#define HW_AIPS_PACRE_ADDR(x) (REGS_AIPS_BASE(x) + 0x40U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRE(x) (*(__IO hw_aips_pacre_t *) HW_AIPS_PACRE_ADDR(x)) +#define HW_AIPS_PACRE_RD(x) (HW_AIPS_PACRE(x).U) +#define HW_AIPS_PACRE_WR(x, v) (HW_AIPS_PACRE(x).U = (v)) +#define HW_AIPS_PACRE_SET(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) | (v))) +#define HW_AIPS_PACRE_CLR(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) & ~(v))) +#define HW_AIPS_PACRE_TOG(x, v) (HW_AIPS_PACRE_WR(x, HW_AIPS_PACRE_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRE bitfields + */ + +/*! + * @name Register AIPS_PACRE, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP7 (0U) //!< Bit position for AIPS_PACRE_TP7. +#define BM_AIPS_PACRE_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRE_TP7. +#define BS_AIPS_PACRE_TP7 (1U) //!< Bit field size in bits for AIPS_PACRE_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP7 field. +#define BR_AIPS_PACRE_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP7. +#define BF_AIPS_PACRE_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP7), uint32_t) & BM_AIPS_PACRE_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRE_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP7 (1U) //!< Bit position for AIPS_PACRE_WP7. +#define BM_AIPS_PACRE_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRE_WP7. +#define BS_AIPS_PACRE_WP7 (1U) //!< Bit field size in bits for AIPS_PACRE_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP7 field. +#define BR_AIPS_PACRE_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP7. +#define BF_AIPS_PACRE_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP7), uint32_t) & BM_AIPS_PACRE_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRE_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP7 (2U) //!< Bit position for AIPS_PACRE_SP7. +#define BM_AIPS_PACRE_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRE_SP7. +#define BS_AIPS_PACRE_SP7 (1U) //!< Bit field size in bits for AIPS_PACRE_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP7 field. +#define BR_AIPS_PACRE_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP7. +#define BF_AIPS_PACRE_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP7), uint32_t) & BM_AIPS_PACRE_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRE_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP6 (4U) //!< Bit position for AIPS_PACRE_TP6. +#define BM_AIPS_PACRE_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRE_TP6. +#define BS_AIPS_PACRE_TP6 (1U) //!< Bit field size in bits for AIPS_PACRE_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP6 field. +#define BR_AIPS_PACRE_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP6. +#define BF_AIPS_PACRE_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP6), uint32_t) & BM_AIPS_PACRE_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRE_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP6 (5U) //!< Bit position for AIPS_PACRE_WP6. +#define BM_AIPS_PACRE_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRE_WP6. +#define BS_AIPS_PACRE_WP6 (1U) //!< Bit field size in bits for AIPS_PACRE_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP6 field. +#define BR_AIPS_PACRE_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP6. +#define BF_AIPS_PACRE_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP6), uint32_t) & BM_AIPS_PACRE_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRE_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP6 (6U) //!< Bit position for AIPS_PACRE_SP6. +#define BM_AIPS_PACRE_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRE_SP6. +#define BS_AIPS_PACRE_SP6 (1U) //!< Bit field size in bits for AIPS_PACRE_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP6 field. +#define BR_AIPS_PACRE_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP6. +#define BF_AIPS_PACRE_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP6), uint32_t) & BM_AIPS_PACRE_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRE_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP5 (8U) //!< Bit position for AIPS_PACRE_TP5. +#define BM_AIPS_PACRE_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRE_TP5. +#define BS_AIPS_PACRE_TP5 (1U) //!< Bit field size in bits for AIPS_PACRE_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP5 field. +#define BR_AIPS_PACRE_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP5. +#define BF_AIPS_PACRE_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP5), uint32_t) & BM_AIPS_PACRE_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRE_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP5 (9U) //!< Bit position for AIPS_PACRE_WP5. +#define BM_AIPS_PACRE_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRE_WP5. +#define BS_AIPS_PACRE_WP5 (1U) //!< Bit field size in bits for AIPS_PACRE_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP5 field. +#define BR_AIPS_PACRE_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP5. +#define BF_AIPS_PACRE_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP5), uint32_t) & BM_AIPS_PACRE_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRE_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP5 (10U) //!< Bit position for AIPS_PACRE_SP5. +#define BM_AIPS_PACRE_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRE_SP5. +#define BS_AIPS_PACRE_SP5 (1U) //!< Bit field size in bits for AIPS_PACRE_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP5 field. +#define BR_AIPS_PACRE_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP5. +#define BF_AIPS_PACRE_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP5), uint32_t) & BM_AIPS_PACRE_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRE_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP4 (12U) //!< Bit position for AIPS_PACRE_TP4. +#define BM_AIPS_PACRE_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRE_TP4. +#define BS_AIPS_PACRE_TP4 (1U) //!< Bit field size in bits for AIPS_PACRE_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP4 field. +#define BR_AIPS_PACRE_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP4. +#define BF_AIPS_PACRE_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP4), uint32_t) & BM_AIPS_PACRE_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRE_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP4 (13U) //!< Bit position for AIPS_PACRE_WP4. +#define BM_AIPS_PACRE_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRE_WP4. +#define BS_AIPS_PACRE_WP4 (1U) //!< Bit field size in bits for AIPS_PACRE_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP4 field. +#define BR_AIPS_PACRE_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP4. +#define BF_AIPS_PACRE_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP4), uint32_t) & BM_AIPS_PACRE_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRE_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP4 (14U) //!< Bit position for AIPS_PACRE_SP4. +#define BM_AIPS_PACRE_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRE_SP4. +#define BS_AIPS_PACRE_SP4 (1U) //!< Bit field size in bits for AIPS_PACRE_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP4 field. +#define BR_AIPS_PACRE_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP4. +#define BF_AIPS_PACRE_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP4), uint32_t) & BM_AIPS_PACRE_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRE_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP3 (16U) //!< Bit position for AIPS_PACRE_TP3. +#define BM_AIPS_PACRE_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRE_TP3. +#define BS_AIPS_PACRE_TP3 (1U) //!< Bit field size in bits for AIPS_PACRE_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP3 field. +#define BR_AIPS_PACRE_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP3. +#define BF_AIPS_PACRE_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP3), uint32_t) & BM_AIPS_PACRE_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRE_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP3 (17U) //!< Bit position for AIPS_PACRE_WP3. +#define BM_AIPS_PACRE_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRE_WP3. +#define BS_AIPS_PACRE_WP3 (1U) //!< Bit field size in bits for AIPS_PACRE_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP3 field. +#define BR_AIPS_PACRE_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP3. +#define BF_AIPS_PACRE_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP3), uint32_t) & BM_AIPS_PACRE_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRE_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP3 (18U) //!< Bit position for AIPS_PACRE_SP3. +#define BM_AIPS_PACRE_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRE_SP3. +#define BS_AIPS_PACRE_SP3 (1U) //!< Bit field size in bits for AIPS_PACRE_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP3 field. +#define BR_AIPS_PACRE_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP3. +#define BF_AIPS_PACRE_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP3), uint32_t) & BM_AIPS_PACRE_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRE_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP2 (20U) //!< Bit position for AIPS_PACRE_TP2. +#define BM_AIPS_PACRE_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRE_TP2. +#define BS_AIPS_PACRE_TP2 (1U) //!< Bit field size in bits for AIPS_PACRE_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP2 field. +#define BR_AIPS_PACRE_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP2. +#define BF_AIPS_PACRE_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP2), uint32_t) & BM_AIPS_PACRE_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRE_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP2 (21U) //!< Bit position for AIPS_PACRE_WP2. +#define BM_AIPS_PACRE_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRE_WP2. +#define BS_AIPS_PACRE_WP2 (1U) //!< Bit field size in bits for AIPS_PACRE_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP2 field. +#define BR_AIPS_PACRE_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP2. +#define BF_AIPS_PACRE_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP2), uint32_t) & BM_AIPS_PACRE_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRE_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP2 (22U) //!< Bit position for AIPS_PACRE_SP2. +#define BM_AIPS_PACRE_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRE_SP2. +#define BS_AIPS_PACRE_SP2 (1U) //!< Bit field size in bits for AIPS_PACRE_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP2 field. +#define BR_AIPS_PACRE_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP2. +#define BF_AIPS_PACRE_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP2), uint32_t) & BM_AIPS_PACRE_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRE_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP1 (24U) //!< Bit position for AIPS_PACRE_TP1. +#define BM_AIPS_PACRE_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRE_TP1. +#define BS_AIPS_PACRE_TP1 (1U) //!< Bit field size in bits for AIPS_PACRE_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP1 field. +#define BR_AIPS_PACRE_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP1. +#define BF_AIPS_PACRE_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP1), uint32_t) & BM_AIPS_PACRE_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRE_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP1 (25U) //!< Bit position for AIPS_PACRE_WP1. +#define BM_AIPS_PACRE_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRE_WP1. +#define BS_AIPS_PACRE_WP1 (1U) //!< Bit field size in bits for AIPS_PACRE_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP1 field. +#define BR_AIPS_PACRE_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP1. +#define BF_AIPS_PACRE_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP1), uint32_t) & BM_AIPS_PACRE_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRE_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP1 (26U) //!< Bit position for AIPS_PACRE_SP1. +#define BM_AIPS_PACRE_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRE_SP1. +#define BS_AIPS_PACRE_SP1 (1U) //!< Bit field size in bits for AIPS_PACRE_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP1 field. +#define BR_AIPS_PACRE_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP1. +#define BF_AIPS_PACRE_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP1), uint32_t) & BM_AIPS_PACRE_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRE_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRE_TP0 (28U) //!< Bit position for AIPS_PACRE_TP0. +#define BM_AIPS_PACRE_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRE_TP0. +#define BS_AIPS_PACRE_TP0 (1U) //!< Bit field size in bits for AIPS_PACRE_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_TP0 field. +#define BR_AIPS_PACRE_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_TP0. +#define BF_AIPS_PACRE_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_TP0), uint32_t) & BM_AIPS_PACRE_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRE_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRE_WP0 (29U) //!< Bit position for AIPS_PACRE_WP0. +#define BM_AIPS_PACRE_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRE_WP0. +#define BS_AIPS_PACRE_WP0 (1U) //!< Bit field size in bits for AIPS_PACRE_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_WP0 field. +#define BR_AIPS_PACRE_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_WP0. +#define BF_AIPS_PACRE_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_WP0), uint32_t) & BM_AIPS_PACRE_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRE_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRE, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRE_SP0 (30U) //!< Bit position for AIPS_PACRE_SP0. +#define BM_AIPS_PACRE_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRE_SP0. +#define BS_AIPS_PACRE_SP0 (1U) //!< Bit field size in bits for AIPS_PACRE_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRE_SP0 field. +#define BR_AIPS_PACRE_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRE_SP0. +#define BF_AIPS_PACRE_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRE_SP0), uint32_t) & BM_AIPS_PACRE_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRE_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRE_ADDR(x), BP_AIPS_PACRE_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRF - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRF - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrf +{ + uint32_t U; + struct _hw_aips_pacrf_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrf_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRF register + */ +//@{ +#define HW_AIPS_PACRF_ADDR(x) (REGS_AIPS_BASE(x) + 0x44U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRF(x) (*(__IO hw_aips_pacrf_t *) HW_AIPS_PACRF_ADDR(x)) +#define HW_AIPS_PACRF_RD(x) (HW_AIPS_PACRF(x).U) +#define HW_AIPS_PACRF_WR(x, v) (HW_AIPS_PACRF(x).U = (v)) +#define HW_AIPS_PACRF_SET(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) | (v))) +#define HW_AIPS_PACRF_CLR(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) & ~(v))) +#define HW_AIPS_PACRF_TOG(x, v) (HW_AIPS_PACRF_WR(x, HW_AIPS_PACRF_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRF bitfields + */ + +/*! + * @name Register AIPS_PACRF, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP7 (0U) //!< Bit position for AIPS_PACRF_TP7. +#define BM_AIPS_PACRF_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRF_TP7. +#define BS_AIPS_PACRF_TP7 (1U) //!< Bit field size in bits for AIPS_PACRF_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP7 field. +#define BR_AIPS_PACRF_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP7. +#define BF_AIPS_PACRF_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP7), uint32_t) & BM_AIPS_PACRF_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRF_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP7 (1U) //!< Bit position for AIPS_PACRF_WP7. +#define BM_AIPS_PACRF_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRF_WP7. +#define BS_AIPS_PACRF_WP7 (1U) //!< Bit field size in bits for AIPS_PACRF_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP7 field. +#define BR_AIPS_PACRF_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP7. +#define BF_AIPS_PACRF_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP7), uint32_t) & BM_AIPS_PACRF_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRF_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP7 (2U) //!< Bit position for AIPS_PACRF_SP7. +#define BM_AIPS_PACRF_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRF_SP7. +#define BS_AIPS_PACRF_SP7 (1U) //!< Bit field size in bits for AIPS_PACRF_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP7 field. +#define BR_AIPS_PACRF_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP7. +#define BF_AIPS_PACRF_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP7), uint32_t) & BM_AIPS_PACRF_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRF_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP6 (4U) //!< Bit position for AIPS_PACRF_TP6. +#define BM_AIPS_PACRF_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRF_TP6. +#define BS_AIPS_PACRF_TP6 (1U) //!< Bit field size in bits for AIPS_PACRF_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP6 field. +#define BR_AIPS_PACRF_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP6. +#define BF_AIPS_PACRF_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP6), uint32_t) & BM_AIPS_PACRF_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRF_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP6 (5U) //!< Bit position for AIPS_PACRF_WP6. +#define BM_AIPS_PACRF_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRF_WP6. +#define BS_AIPS_PACRF_WP6 (1U) //!< Bit field size in bits for AIPS_PACRF_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP6 field. +#define BR_AIPS_PACRF_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP6. +#define BF_AIPS_PACRF_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP6), uint32_t) & BM_AIPS_PACRF_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRF_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP6 (6U) //!< Bit position for AIPS_PACRF_SP6. +#define BM_AIPS_PACRF_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRF_SP6. +#define BS_AIPS_PACRF_SP6 (1U) //!< Bit field size in bits for AIPS_PACRF_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP6 field. +#define BR_AIPS_PACRF_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP6. +#define BF_AIPS_PACRF_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP6), uint32_t) & BM_AIPS_PACRF_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRF_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP5 (8U) //!< Bit position for AIPS_PACRF_TP5. +#define BM_AIPS_PACRF_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRF_TP5. +#define BS_AIPS_PACRF_TP5 (1U) //!< Bit field size in bits for AIPS_PACRF_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP5 field. +#define BR_AIPS_PACRF_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP5. +#define BF_AIPS_PACRF_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP5), uint32_t) & BM_AIPS_PACRF_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRF_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP5 (9U) //!< Bit position for AIPS_PACRF_WP5. +#define BM_AIPS_PACRF_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRF_WP5. +#define BS_AIPS_PACRF_WP5 (1U) //!< Bit field size in bits for AIPS_PACRF_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP5 field. +#define BR_AIPS_PACRF_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP5. +#define BF_AIPS_PACRF_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP5), uint32_t) & BM_AIPS_PACRF_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRF_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP5 (10U) //!< Bit position for AIPS_PACRF_SP5. +#define BM_AIPS_PACRF_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRF_SP5. +#define BS_AIPS_PACRF_SP5 (1U) //!< Bit field size in bits for AIPS_PACRF_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP5 field. +#define BR_AIPS_PACRF_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP5. +#define BF_AIPS_PACRF_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP5), uint32_t) & BM_AIPS_PACRF_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRF_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP4 (12U) //!< Bit position for AIPS_PACRF_TP4. +#define BM_AIPS_PACRF_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRF_TP4. +#define BS_AIPS_PACRF_TP4 (1U) //!< Bit field size in bits for AIPS_PACRF_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP4 field. +#define BR_AIPS_PACRF_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP4. +#define BF_AIPS_PACRF_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP4), uint32_t) & BM_AIPS_PACRF_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRF_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP4 (13U) //!< Bit position for AIPS_PACRF_WP4. +#define BM_AIPS_PACRF_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRF_WP4. +#define BS_AIPS_PACRF_WP4 (1U) //!< Bit field size in bits for AIPS_PACRF_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP4 field. +#define BR_AIPS_PACRF_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP4. +#define BF_AIPS_PACRF_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP4), uint32_t) & BM_AIPS_PACRF_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRF_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP4 (14U) //!< Bit position for AIPS_PACRF_SP4. +#define BM_AIPS_PACRF_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRF_SP4. +#define BS_AIPS_PACRF_SP4 (1U) //!< Bit field size in bits for AIPS_PACRF_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP4 field. +#define BR_AIPS_PACRF_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP4. +#define BF_AIPS_PACRF_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP4), uint32_t) & BM_AIPS_PACRF_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRF_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP3 (16U) //!< Bit position for AIPS_PACRF_TP3. +#define BM_AIPS_PACRF_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRF_TP3. +#define BS_AIPS_PACRF_TP3 (1U) //!< Bit field size in bits for AIPS_PACRF_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP3 field. +#define BR_AIPS_PACRF_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP3. +#define BF_AIPS_PACRF_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP3), uint32_t) & BM_AIPS_PACRF_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRF_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP3 (17U) //!< Bit position for AIPS_PACRF_WP3. +#define BM_AIPS_PACRF_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRF_WP3. +#define BS_AIPS_PACRF_WP3 (1U) //!< Bit field size in bits for AIPS_PACRF_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP3 field. +#define BR_AIPS_PACRF_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP3. +#define BF_AIPS_PACRF_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP3), uint32_t) & BM_AIPS_PACRF_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRF_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP3 (18U) //!< Bit position for AIPS_PACRF_SP3. +#define BM_AIPS_PACRF_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRF_SP3. +#define BS_AIPS_PACRF_SP3 (1U) //!< Bit field size in bits for AIPS_PACRF_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP3 field. +#define BR_AIPS_PACRF_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP3. +#define BF_AIPS_PACRF_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP3), uint32_t) & BM_AIPS_PACRF_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRF_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP2 (20U) //!< Bit position for AIPS_PACRF_TP2. +#define BM_AIPS_PACRF_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRF_TP2. +#define BS_AIPS_PACRF_TP2 (1U) //!< Bit field size in bits for AIPS_PACRF_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP2 field. +#define BR_AIPS_PACRF_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP2. +#define BF_AIPS_PACRF_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP2), uint32_t) & BM_AIPS_PACRF_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRF_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP2 (21U) //!< Bit position for AIPS_PACRF_WP2. +#define BM_AIPS_PACRF_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRF_WP2. +#define BS_AIPS_PACRF_WP2 (1U) //!< Bit field size in bits for AIPS_PACRF_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP2 field. +#define BR_AIPS_PACRF_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP2. +#define BF_AIPS_PACRF_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP2), uint32_t) & BM_AIPS_PACRF_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRF_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP2 (22U) //!< Bit position for AIPS_PACRF_SP2. +#define BM_AIPS_PACRF_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRF_SP2. +#define BS_AIPS_PACRF_SP2 (1U) //!< Bit field size in bits for AIPS_PACRF_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP2 field. +#define BR_AIPS_PACRF_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP2. +#define BF_AIPS_PACRF_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP2), uint32_t) & BM_AIPS_PACRF_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRF_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP1 (24U) //!< Bit position for AIPS_PACRF_TP1. +#define BM_AIPS_PACRF_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRF_TP1. +#define BS_AIPS_PACRF_TP1 (1U) //!< Bit field size in bits for AIPS_PACRF_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP1 field. +#define BR_AIPS_PACRF_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP1. +#define BF_AIPS_PACRF_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP1), uint32_t) & BM_AIPS_PACRF_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRF_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP1 (25U) //!< Bit position for AIPS_PACRF_WP1. +#define BM_AIPS_PACRF_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRF_WP1. +#define BS_AIPS_PACRF_WP1 (1U) //!< Bit field size in bits for AIPS_PACRF_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP1 field. +#define BR_AIPS_PACRF_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP1. +#define BF_AIPS_PACRF_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP1), uint32_t) & BM_AIPS_PACRF_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRF_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP1 (26U) //!< Bit position for AIPS_PACRF_SP1. +#define BM_AIPS_PACRF_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRF_SP1. +#define BS_AIPS_PACRF_SP1 (1U) //!< Bit field size in bits for AIPS_PACRF_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP1 field. +#define BR_AIPS_PACRF_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP1. +#define BF_AIPS_PACRF_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP1), uint32_t) & BM_AIPS_PACRF_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRF_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRF_TP0 (28U) //!< Bit position for AIPS_PACRF_TP0. +#define BM_AIPS_PACRF_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRF_TP0. +#define BS_AIPS_PACRF_TP0 (1U) //!< Bit field size in bits for AIPS_PACRF_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_TP0 field. +#define BR_AIPS_PACRF_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_TP0. +#define BF_AIPS_PACRF_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_TP0), uint32_t) & BM_AIPS_PACRF_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRF_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRF_WP0 (29U) //!< Bit position for AIPS_PACRF_WP0. +#define BM_AIPS_PACRF_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRF_WP0. +#define BS_AIPS_PACRF_WP0 (1U) //!< Bit field size in bits for AIPS_PACRF_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_WP0 field. +#define BR_AIPS_PACRF_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_WP0. +#define BF_AIPS_PACRF_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_WP0), uint32_t) & BM_AIPS_PACRF_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRF_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRF, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRF_SP0 (30U) //!< Bit position for AIPS_PACRF_SP0. +#define BM_AIPS_PACRF_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRF_SP0. +#define BS_AIPS_PACRF_SP0 (1U) //!< Bit field size in bits for AIPS_PACRF_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRF_SP0 field. +#define BR_AIPS_PACRF_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRF_SP0. +#define BF_AIPS_PACRF_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRF_SP0), uint32_t) & BM_AIPS_PACRF_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRF_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRF_ADDR(x), BP_AIPS_PACRF_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRG - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRG - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrg +{ + uint32_t U; + struct _hw_aips_pacrg_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrg_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRG register + */ +//@{ +#define HW_AIPS_PACRG_ADDR(x) (REGS_AIPS_BASE(x) + 0x48U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRG(x) (*(__IO hw_aips_pacrg_t *) HW_AIPS_PACRG_ADDR(x)) +#define HW_AIPS_PACRG_RD(x) (HW_AIPS_PACRG(x).U) +#define HW_AIPS_PACRG_WR(x, v) (HW_AIPS_PACRG(x).U = (v)) +#define HW_AIPS_PACRG_SET(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) | (v))) +#define HW_AIPS_PACRG_CLR(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) & ~(v))) +#define HW_AIPS_PACRG_TOG(x, v) (HW_AIPS_PACRG_WR(x, HW_AIPS_PACRG_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRG bitfields + */ + +/*! + * @name Register AIPS_PACRG, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP7 (0U) //!< Bit position for AIPS_PACRG_TP7. +#define BM_AIPS_PACRG_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRG_TP7. +#define BS_AIPS_PACRG_TP7 (1U) //!< Bit field size in bits for AIPS_PACRG_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP7 field. +#define BR_AIPS_PACRG_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP7. +#define BF_AIPS_PACRG_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP7), uint32_t) & BM_AIPS_PACRG_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRG_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP7 (1U) //!< Bit position for AIPS_PACRG_WP7. +#define BM_AIPS_PACRG_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRG_WP7. +#define BS_AIPS_PACRG_WP7 (1U) //!< Bit field size in bits for AIPS_PACRG_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP7 field. +#define BR_AIPS_PACRG_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP7. +#define BF_AIPS_PACRG_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP7), uint32_t) & BM_AIPS_PACRG_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRG_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP7 (2U) //!< Bit position for AIPS_PACRG_SP7. +#define BM_AIPS_PACRG_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRG_SP7. +#define BS_AIPS_PACRG_SP7 (1U) //!< Bit field size in bits for AIPS_PACRG_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP7 field. +#define BR_AIPS_PACRG_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP7. +#define BF_AIPS_PACRG_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP7), uint32_t) & BM_AIPS_PACRG_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRG_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP6 (4U) //!< Bit position for AIPS_PACRG_TP6. +#define BM_AIPS_PACRG_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRG_TP6. +#define BS_AIPS_PACRG_TP6 (1U) //!< Bit field size in bits for AIPS_PACRG_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP6 field. +#define BR_AIPS_PACRG_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP6. +#define BF_AIPS_PACRG_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP6), uint32_t) & BM_AIPS_PACRG_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRG_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP6 (5U) //!< Bit position for AIPS_PACRG_WP6. +#define BM_AIPS_PACRG_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRG_WP6. +#define BS_AIPS_PACRG_WP6 (1U) //!< Bit field size in bits for AIPS_PACRG_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP6 field. +#define BR_AIPS_PACRG_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP6. +#define BF_AIPS_PACRG_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP6), uint32_t) & BM_AIPS_PACRG_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRG_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP6 (6U) //!< Bit position for AIPS_PACRG_SP6. +#define BM_AIPS_PACRG_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRG_SP6. +#define BS_AIPS_PACRG_SP6 (1U) //!< Bit field size in bits for AIPS_PACRG_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP6 field. +#define BR_AIPS_PACRG_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP6. +#define BF_AIPS_PACRG_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP6), uint32_t) & BM_AIPS_PACRG_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRG_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP5 (8U) //!< Bit position for AIPS_PACRG_TP5. +#define BM_AIPS_PACRG_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRG_TP5. +#define BS_AIPS_PACRG_TP5 (1U) //!< Bit field size in bits for AIPS_PACRG_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP5 field. +#define BR_AIPS_PACRG_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP5. +#define BF_AIPS_PACRG_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP5), uint32_t) & BM_AIPS_PACRG_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRG_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP5 (9U) //!< Bit position for AIPS_PACRG_WP5. +#define BM_AIPS_PACRG_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRG_WP5. +#define BS_AIPS_PACRG_WP5 (1U) //!< Bit field size in bits for AIPS_PACRG_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP5 field. +#define BR_AIPS_PACRG_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP5. +#define BF_AIPS_PACRG_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP5), uint32_t) & BM_AIPS_PACRG_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRG_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP5 (10U) //!< Bit position for AIPS_PACRG_SP5. +#define BM_AIPS_PACRG_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRG_SP5. +#define BS_AIPS_PACRG_SP5 (1U) //!< Bit field size in bits for AIPS_PACRG_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP5 field. +#define BR_AIPS_PACRG_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP5. +#define BF_AIPS_PACRG_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP5), uint32_t) & BM_AIPS_PACRG_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRG_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP4 (12U) //!< Bit position for AIPS_PACRG_TP4. +#define BM_AIPS_PACRG_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRG_TP4. +#define BS_AIPS_PACRG_TP4 (1U) //!< Bit field size in bits for AIPS_PACRG_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP4 field. +#define BR_AIPS_PACRG_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP4. +#define BF_AIPS_PACRG_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP4), uint32_t) & BM_AIPS_PACRG_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRG_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP4 (13U) //!< Bit position for AIPS_PACRG_WP4. +#define BM_AIPS_PACRG_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRG_WP4. +#define BS_AIPS_PACRG_WP4 (1U) //!< Bit field size in bits for AIPS_PACRG_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP4 field. +#define BR_AIPS_PACRG_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP4. +#define BF_AIPS_PACRG_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP4), uint32_t) & BM_AIPS_PACRG_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRG_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP4 (14U) //!< Bit position for AIPS_PACRG_SP4. +#define BM_AIPS_PACRG_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRG_SP4. +#define BS_AIPS_PACRG_SP4 (1U) //!< Bit field size in bits for AIPS_PACRG_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP4 field. +#define BR_AIPS_PACRG_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP4. +#define BF_AIPS_PACRG_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP4), uint32_t) & BM_AIPS_PACRG_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRG_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP3 (16U) //!< Bit position for AIPS_PACRG_TP3. +#define BM_AIPS_PACRG_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRG_TP3. +#define BS_AIPS_PACRG_TP3 (1U) //!< Bit field size in bits for AIPS_PACRG_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP3 field. +#define BR_AIPS_PACRG_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP3. +#define BF_AIPS_PACRG_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP3), uint32_t) & BM_AIPS_PACRG_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRG_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP3 (17U) //!< Bit position for AIPS_PACRG_WP3. +#define BM_AIPS_PACRG_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRG_WP3. +#define BS_AIPS_PACRG_WP3 (1U) //!< Bit field size in bits for AIPS_PACRG_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP3 field. +#define BR_AIPS_PACRG_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP3. +#define BF_AIPS_PACRG_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP3), uint32_t) & BM_AIPS_PACRG_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRG_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP3 (18U) //!< Bit position for AIPS_PACRG_SP3. +#define BM_AIPS_PACRG_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRG_SP3. +#define BS_AIPS_PACRG_SP3 (1U) //!< Bit field size in bits for AIPS_PACRG_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP3 field. +#define BR_AIPS_PACRG_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP3. +#define BF_AIPS_PACRG_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP3), uint32_t) & BM_AIPS_PACRG_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRG_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP2 (20U) //!< Bit position for AIPS_PACRG_TP2. +#define BM_AIPS_PACRG_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRG_TP2. +#define BS_AIPS_PACRG_TP2 (1U) //!< Bit field size in bits for AIPS_PACRG_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP2 field. +#define BR_AIPS_PACRG_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP2. +#define BF_AIPS_PACRG_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP2), uint32_t) & BM_AIPS_PACRG_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRG_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP2 (21U) //!< Bit position for AIPS_PACRG_WP2. +#define BM_AIPS_PACRG_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRG_WP2. +#define BS_AIPS_PACRG_WP2 (1U) //!< Bit field size in bits for AIPS_PACRG_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP2 field. +#define BR_AIPS_PACRG_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP2. +#define BF_AIPS_PACRG_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP2), uint32_t) & BM_AIPS_PACRG_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRG_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP2 (22U) //!< Bit position for AIPS_PACRG_SP2. +#define BM_AIPS_PACRG_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRG_SP2. +#define BS_AIPS_PACRG_SP2 (1U) //!< Bit field size in bits for AIPS_PACRG_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP2 field. +#define BR_AIPS_PACRG_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP2. +#define BF_AIPS_PACRG_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP2), uint32_t) & BM_AIPS_PACRG_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRG_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP1 (24U) //!< Bit position for AIPS_PACRG_TP1. +#define BM_AIPS_PACRG_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRG_TP1. +#define BS_AIPS_PACRG_TP1 (1U) //!< Bit field size in bits for AIPS_PACRG_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP1 field. +#define BR_AIPS_PACRG_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP1. +#define BF_AIPS_PACRG_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP1), uint32_t) & BM_AIPS_PACRG_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRG_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP1 (25U) //!< Bit position for AIPS_PACRG_WP1. +#define BM_AIPS_PACRG_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRG_WP1. +#define BS_AIPS_PACRG_WP1 (1U) //!< Bit field size in bits for AIPS_PACRG_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP1 field. +#define BR_AIPS_PACRG_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP1. +#define BF_AIPS_PACRG_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP1), uint32_t) & BM_AIPS_PACRG_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRG_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP1 (26U) //!< Bit position for AIPS_PACRG_SP1. +#define BM_AIPS_PACRG_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRG_SP1. +#define BS_AIPS_PACRG_SP1 (1U) //!< Bit field size in bits for AIPS_PACRG_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP1 field. +#define BR_AIPS_PACRG_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP1. +#define BF_AIPS_PACRG_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP1), uint32_t) & BM_AIPS_PACRG_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRG_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRG_TP0 (28U) //!< Bit position for AIPS_PACRG_TP0. +#define BM_AIPS_PACRG_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRG_TP0. +#define BS_AIPS_PACRG_TP0 (1U) //!< Bit field size in bits for AIPS_PACRG_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_TP0 field. +#define BR_AIPS_PACRG_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_TP0. +#define BF_AIPS_PACRG_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_TP0), uint32_t) & BM_AIPS_PACRG_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRG_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRG_WP0 (29U) //!< Bit position for AIPS_PACRG_WP0. +#define BM_AIPS_PACRG_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRG_WP0. +#define BS_AIPS_PACRG_WP0 (1U) //!< Bit field size in bits for AIPS_PACRG_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_WP0 field. +#define BR_AIPS_PACRG_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_WP0. +#define BF_AIPS_PACRG_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_WP0), uint32_t) & BM_AIPS_PACRG_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRG_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRG, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRG_SP0 (30U) //!< Bit position for AIPS_PACRG_SP0. +#define BM_AIPS_PACRG_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRG_SP0. +#define BS_AIPS_PACRG_SP0 (1U) //!< Bit field size in bits for AIPS_PACRG_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRG_SP0 field. +#define BR_AIPS_PACRG_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRG_SP0. +#define BF_AIPS_PACRG_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRG_SP0), uint32_t) & BM_AIPS_PACRG_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRG_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRG_ADDR(x), BP_AIPS_PACRG_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRH - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRH - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrh +{ + uint32_t U; + struct _hw_aips_pacrh_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrh_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRH register + */ +//@{ +#define HW_AIPS_PACRH_ADDR(x) (REGS_AIPS_BASE(x) + 0x4CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRH(x) (*(__IO hw_aips_pacrh_t *) HW_AIPS_PACRH_ADDR(x)) +#define HW_AIPS_PACRH_RD(x) (HW_AIPS_PACRH(x).U) +#define HW_AIPS_PACRH_WR(x, v) (HW_AIPS_PACRH(x).U = (v)) +#define HW_AIPS_PACRH_SET(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) | (v))) +#define HW_AIPS_PACRH_CLR(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) & ~(v))) +#define HW_AIPS_PACRH_TOG(x, v) (HW_AIPS_PACRH_WR(x, HW_AIPS_PACRH_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRH bitfields + */ + +/*! + * @name Register AIPS_PACRH, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP7 (0U) //!< Bit position for AIPS_PACRH_TP7. +#define BM_AIPS_PACRH_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRH_TP7. +#define BS_AIPS_PACRH_TP7 (1U) //!< Bit field size in bits for AIPS_PACRH_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP7 field. +#define BR_AIPS_PACRH_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP7. +#define BF_AIPS_PACRH_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP7), uint32_t) & BM_AIPS_PACRH_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRH_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP7 (1U) //!< Bit position for AIPS_PACRH_WP7. +#define BM_AIPS_PACRH_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRH_WP7. +#define BS_AIPS_PACRH_WP7 (1U) //!< Bit field size in bits for AIPS_PACRH_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP7 field. +#define BR_AIPS_PACRH_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP7. +#define BF_AIPS_PACRH_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP7), uint32_t) & BM_AIPS_PACRH_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRH_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP7 (2U) //!< Bit position for AIPS_PACRH_SP7. +#define BM_AIPS_PACRH_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRH_SP7. +#define BS_AIPS_PACRH_SP7 (1U) //!< Bit field size in bits for AIPS_PACRH_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP7 field. +#define BR_AIPS_PACRH_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP7. +#define BF_AIPS_PACRH_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP7), uint32_t) & BM_AIPS_PACRH_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRH_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP6 (4U) //!< Bit position for AIPS_PACRH_TP6. +#define BM_AIPS_PACRH_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRH_TP6. +#define BS_AIPS_PACRH_TP6 (1U) //!< Bit field size in bits for AIPS_PACRH_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP6 field. +#define BR_AIPS_PACRH_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP6. +#define BF_AIPS_PACRH_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP6), uint32_t) & BM_AIPS_PACRH_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRH_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP6 (5U) //!< Bit position for AIPS_PACRH_WP6. +#define BM_AIPS_PACRH_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRH_WP6. +#define BS_AIPS_PACRH_WP6 (1U) //!< Bit field size in bits for AIPS_PACRH_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP6 field. +#define BR_AIPS_PACRH_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP6. +#define BF_AIPS_PACRH_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP6), uint32_t) & BM_AIPS_PACRH_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRH_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP6 (6U) //!< Bit position for AIPS_PACRH_SP6. +#define BM_AIPS_PACRH_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRH_SP6. +#define BS_AIPS_PACRH_SP6 (1U) //!< Bit field size in bits for AIPS_PACRH_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP6 field. +#define BR_AIPS_PACRH_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP6. +#define BF_AIPS_PACRH_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP6), uint32_t) & BM_AIPS_PACRH_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRH_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP5 (8U) //!< Bit position for AIPS_PACRH_TP5. +#define BM_AIPS_PACRH_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRH_TP5. +#define BS_AIPS_PACRH_TP5 (1U) //!< Bit field size in bits for AIPS_PACRH_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP5 field. +#define BR_AIPS_PACRH_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP5. +#define BF_AIPS_PACRH_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP5), uint32_t) & BM_AIPS_PACRH_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRH_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP5 (9U) //!< Bit position for AIPS_PACRH_WP5. +#define BM_AIPS_PACRH_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRH_WP5. +#define BS_AIPS_PACRH_WP5 (1U) //!< Bit field size in bits for AIPS_PACRH_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP5 field. +#define BR_AIPS_PACRH_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP5. +#define BF_AIPS_PACRH_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP5), uint32_t) & BM_AIPS_PACRH_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRH_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP5 (10U) //!< Bit position for AIPS_PACRH_SP5. +#define BM_AIPS_PACRH_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRH_SP5. +#define BS_AIPS_PACRH_SP5 (1U) //!< Bit field size in bits for AIPS_PACRH_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP5 field. +#define BR_AIPS_PACRH_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP5. +#define BF_AIPS_PACRH_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP5), uint32_t) & BM_AIPS_PACRH_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRH_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP4 (12U) //!< Bit position for AIPS_PACRH_TP4. +#define BM_AIPS_PACRH_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRH_TP4. +#define BS_AIPS_PACRH_TP4 (1U) //!< Bit field size in bits for AIPS_PACRH_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP4 field. +#define BR_AIPS_PACRH_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP4. +#define BF_AIPS_PACRH_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP4), uint32_t) & BM_AIPS_PACRH_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRH_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP4 (13U) //!< Bit position for AIPS_PACRH_WP4. +#define BM_AIPS_PACRH_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRH_WP4. +#define BS_AIPS_PACRH_WP4 (1U) //!< Bit field size in bits for AIPS_PACRH_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP4 field. +#define BR_AIPS_PACRH_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP4. +#define BF_AIPS_PACRH_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP4), uint32_t) & BM_AIPS_PACRH_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRH_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP4 (14U) //!< Bit position for AIPS_PACRH_SP4. +#define BM_AIPS_PACRH_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRH_SP4. +#define BS_AIPS_PACRH_SP4 (1U) //!< Bit field size in bits for AIPS_PACRH_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP4 field. +#define BR_AIPS_PACRH_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP4. +#define BF_AIPS_PACRH_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP4), uint32_t) & BM_AIPS_PACRH_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRH_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP3 (16U) //!< Bit position for AIPS_PACRH_TP3. +#define BM_AIPS_PACRH_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRH_TP3. +#define BS_AIPS_PACRH_TP3 (1U) //!< Bit field size in bits for AIPS_PACRH_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP3 field. +#define BR_AIPS_PACRH_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP3. +#define BF_AIPS_PACRH_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP3), uint32_t) & BM_AIPS_PACRH_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRH_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP3 (17U) //!< Bit position for AIPS_PACRH_WP3. +#define BM_AIPS_PACRH_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRH_WP3. +#define BS_AIPS_PACRH_WP3 (1U) //!< Bit field size in bits for AIPS_PACRH_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP3 field. +#define BR_AIPS_PACRH_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP3. +#define BF_AIPS_PACRH_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP3), uint32_t) & BM_AIPS_PACRH_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRH_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP3 (18U) //!< Bit position for AIPS_PACRH_SP3. +#define BM_AIPS_PACRH_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRH_SP3. +#define BS_AIPS_PACRH_SP3 (1U) //!< Bit field size in bits for AIPS_PACRH_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP3 field. +#define BR_AIPS_PACRH_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP3. +#define BF_AIPS_PACRH_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP3), uint32_t) & BM_AIPS_PACRH_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRH_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP2 (20U) //!< Bit position for AIPS_PACRH_TP2. +#define BM_AIPS_PACRH_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRH_TP2. +#define BS_AIPS_PACRH_TP2 (1U) //!< Bit field size in bits for AIPS_PACRH_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP2 field. +#define BR_AIPS_PACRH_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP2. +#define BF_AIPS_PACRH_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP2), uint32_t) & BM_AIPS_PACRH_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRH_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP2 (21U) //!< Bit position for AIPS_PACRH_WP2. +#define BM_AIPS_PACRH_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRH_WP2. +#define BS_AIPS_PACRH_WP2 (1U) //!< Bit field size in bits for AIPS_PACRH_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP2 field. +#define BR_AIPS_PACRH_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP2. +#define BF_AIPS_PACRH_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP2), uint32_t) & BM_AIPS_PACRH_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRH_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP2 (22U) //!< Bit position for AIPS_PACRH_SP2. +#define BM_AIPS_PACRH_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRH_SP2. +#define BS_AIPS_PACRH_SP2 (1U) //!< Bit field size in bits for AIPS_PACRH_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP2 field. +#define BR_AIPS_PACRH_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP2. +#define BF_AIPS_PACRH_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP2), uint32_t) & BM_AIPS_PACRH_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRH_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP1 (24U) //!< Bit position for AIPS_PACRH_TP1. +#define BM_AIPS_PACRH_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRH_TP1. +#define BS_AIPS_PACRH_TP1 (1U) //!< Bit field size in bits for AIPS_PACRH_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP1 field. +#define BR_AIPS_PACRH_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP1. +#define BF_AIPS_PACRH_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP1), uint32_t) & BM_AIPS_PACRH_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRH_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP1 (25U) //!< Bit position for AIPS_PACRH_WP1. +#define BM_AIPS_PACRH_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRH_WP1. +#define BS_AIPS_PACRH_WP1 (1U) //!< Bit field size in bits for AIPS_PACRH_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP1 field. +#define BR_AIPS_PACRH_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP1. +#define BF_AIPS_PACRH_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP1), uint32_t) & BM_AIPS_PACRH_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRH_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP1 (26U) //!< Bit position for AIPS_PACRH_SP1. +#define BM_AIPS_PACRH_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRH_SP1. +#define BS_AIPS_PACRH_SP1 (1U) //!< Bit field size in bits for AIPS_PACRH_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP1 field. +#define BR_AIPS_PACRH_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP1. +#define BF_AIPS_PACRH_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP1), uint32_t) & BM_AIPS_PACRH_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRH_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRH_TP0 (28U) //!< Bit position for AIPS_PACRH_TP0. +#define BM_AIPS_PACRH_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRH_TP0. +#define BS_AIPS_PACRH_TP0 (1U) //!< Bit field size in bits for AIPS_PACRH_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_TP0 field. +#define BR_AIPS_PACRH_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_TP0. +#define BF_AIPS_PACRH_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_TP0), uint32_t) & BM_AIPS_PACRH_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRH_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRH_WP0 (29U) //!< Bit position for AIPS_PACRH_WP0. +#define BM_AIPS_PACRH_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRH_WP0. +#define BS_AIPS_PACRH_WP0 (1U) //!< Bit field size in bits for AIPS_PACRH_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_WP0 field. +#define BR_AIPS_PACRH_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_WP0. +#define BF_AIPS_PACRH_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_WP0), uint32_t) & BM_AIPS_PACRH_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRH_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRH, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRH_SP0 (30U) //!< Bit position for AIPS_PACRH_SP0. +#define BM_AIPS_PACRH_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRH_SP0. +#define BS_AIPS_PACRH_SP0 (1U) //!< Bit field size in bits for AIPS_PACRH_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRH_SP0 field. +#define BR_AIPS_PACRH_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRH_SP0. +#define BF_AIPS_PACRH_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRH_SP0), uint32_t) & BM_AIPS_PACRH_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRH_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRH_ADDR(x), BP_AIPS_PACRH_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRI - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRI - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacri +{ + uint32_t U; + struct _hw_aips_pacri_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacri_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRI register + */ +//@{ +#define HW_AIPS_PACRI_ADDR(x) (REGS_AIPS_BASE(x) + 0x50U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRI(x) (*(__IO hw_aips_pacri_t *) HW_AIPS_PACRI_ADDR(x)) +#define HW_AIPS_PACRI_RD(x) (HW_AIPS_PACRI(x).U) +#define HW_AIPS_PACRI_WR(x, v) (HW_AIPS_PACRI(x).U = (v)) +#define HW_AIPS_PACRI_SET(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) | (v))) +#define HW_AIPS_PACRI_CLR(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) & ~(v))) +#define HW_AIPS_PACRI_TOG(x, v) (HW_AIPS_PACRI_WR(x, HW_AIPS_PACRI_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRI bitfields + */ + +/*! + * @name Register AIPS_PACRI, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP7 (0U) //!< Bit position for AIPS_PACRI_TP7. +#define BM_AIPS_PACRI_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRI_TP7. +#define BS_AIPS_PACRI_TP7 (1U) //!< Bit field size in bits for AIPS_PACRI_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP7 field. +#define BR_AIPS_PACRI_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP7. +#define BF_AIPS_PACRI_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP7), uint32_t) & BM_AIPS_PACRI_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRI_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP7 (1U) //!< Bit position for AIPS_PACRI_WP7. +#define BM_AIPS_PACRI_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRI_WP7. +#define BS_AIPS_PACRI_WP7 (1U) //!< Bit field size in bits for AIPS_PACRI_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP7 field. +#define BR_AIPS_PACRI_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP7. +#define BF_AIPS_PACRI_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP7), uint32_t) & BM_AIPS_PACRI_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRI_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP7 (2U) //!< Bit position for AIPS_PACRI_SP7. +#define BM_AIPS_PACRI_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRI_SP7. +#define BS_AIPS_PACRI_SP7 (1U) //!< Bit field size in bits for AIPS_PACRI_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP7 field. +#define BR_AIPS_PACRI_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP7. +#define BF_AIPS_PACRI_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP7), uint32_t) & BM_AIPS_PACRI_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRI_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP6 (4U) //!< Bit position for AIPS_PACRI_TP6. +#define BM_AIPS_PACRI_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRI_TP6. +#define BS_AIPS_PACRI_TP6 (1U) //!< Bit field size in bits for AIPS_PACRI_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP6 field. +#define BR_AIPS_PACRI_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP6. +#define BF_AIPS_PACRI_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP6), uint32_t) & BM_AIPS_PACRI_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRI_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP6 (5U) //!< Bit position for AIPS_PACRI_WP6. +#define BM_AIPS_PACRI_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRI_WP6. +#define BS_AIPS_PACRI_WP6 (1U) //!< Bit field size in bits for AIPS_PACRI_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP6 field. +#define BR_AIPS_PACRI_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP6. +#define BF_AIPS_PACRI_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP6), uint32_t) & BM_AIPS_PACRI_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRI_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP6 (6U) //!< Bit position for AIPS_PACRI_SP6. +#define BM_AIPS_PACRI_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRI_SP6. +#define BS_AIPS_PACRI_SP6 (1U) //!< Bit field size in bits for AIPS_PACRI_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP6 field. +#define BR_AIPS_PACRI_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP6. +#define BF_AIPS_PACRI_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP6), uint32_t) & BM_AIPS_PACRI_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRI_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP5 (8U) //!< Bit position for AIPS_PACRI_TP5. +#define BM_AIPS_PACRI_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRI_TP5. +#define BS_AIPS_PACRI_TP5 (1U) //!< Bit field size in bits for AIPS_PACRI_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP5 field. +#define BR_AIPS_PACRI_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP5. +#define BF_AIPS_PACRI_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP5), uint32_t) & BM_AIPS_PACRI_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRI_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP5 (9U) //!< Bit position for AIPS_PACRI_WP5. +#define BM_AIPS_PACRI_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRI_WP5. +#define BS_AIPS_PACRI_WP5 (1U) //!< Bit field size in bits for AIPS_PACRI_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP5 field. +#define BR_AIPS_PACRI_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP5. +#define BF_AIPS_PACRI_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP5), uint32_t) & BM_AIPS_PACRI_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRI_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP5 (10U) //!< Bit position for AIPS_PACRI_SP5. +#define BM_AIPS_PACRI_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRI_SP5. +#define BS_AIPS_PACRI_SP5 (1U) //!< Bit field size in bits for AIPS_PACRI_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP5 field. +#define BR_AIPS_PACRI_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP5. +#define BF_AIPS_PACRI_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP5), uint32_t) & BM_AIPS_PACRI_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRI_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP4 (12U) //!< Bit position for AIPS_PACRI_TP4. +#define BM_AIPS_PACRI_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRI_TP4. +#define BS_AIPS_PACRI_TP4 (1U) //!< Bit field size in bits for AIPS_PACRI_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP4 field. +#define BR_AIPS_PACRI_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP4. +#define BF_AIPS_PACRI_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP4), uint32_t) & BM_AIPS_PACRI_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRI_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP4 (13U) //!< Bit position for AIPS_PACRI_WP4. +#define BM_AIPS_PACRI_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRI_WP4. +#define BS_AIPS_PACRI_WP4 (1U) //!< Bit field size in bits for AIPS_PACRI_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP4 field. +#define BR_AIPS_PACRI_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP4. +#define BF_AIPS_PACRI_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP4), uint32_t) & BM_AIPS_PACRI_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRI_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP4 (14U) //!< Bit position for AIPS_PACRI_SP4. +#define BM_AIPS_PACRI_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRI_SP4. +#define BS_AIPS_PACRI_SP4 (1U) //!< Bit field size in bits for AIPS_PACRI_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP4 field. +#define BR_AIPS_PACRI_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP4. +#define BF_AIPS_PACRI_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP4), uint32_t) & BM_AIPS_PACRI_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRI_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP3 (16U) //!< Bit position for AIPS_PACRI_TP3. +#define BM_AIPS_PACRI_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRI_TP3. +#define BS_AIPS_PACRI_TP3 (1U) //!< Bit field size in bits for AIPS_PACRI_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP3 field. +#define BR_AIPS_PACRI_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP3. +#define BF_AIPS_PACRI_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP3), uint32_t) & BM_AIPS_PACRI_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRI_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP3 (17U) //!< Bit position for AIPS_PACRI_WP3. +#define BM_AIPS_PACRI_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRI_WP3. +#define BS_AIPS_PACRI_WP3 (1U) //!< Bit field size in bits for AIPS_PACRI_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP3 field. +#define BR_AIPS_PACRI_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP3. +#define BF_AIPS_PACRI_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP3), uint32_t) & BM_AIPS_PACRI_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRI_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP3 (18U) //!< Bit position for AIPS_PACRI_SP3. +#define BM_AIPS_PACRI_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRI_SP3. +#define BS_AIPS_PACRI_SP3 (1U) //!< Bit field size in bits for AIPS_PACRI_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP3 field. +#define BR_AIPS_PACRI_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP3. +#define BF_AIPS_PACRI_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP3), uint32_t) & BM_AIPS_PACRI_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRI_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP2 (20U) //!< Bit position for AIPS_PACRI_TP2. +#define BM_AIPS_PACRI_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRI_TP2. +#define BS_AIPS_PACRI_TP2 (1U) //!< Bit field size in bits for AIPS_PACRI_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP2 field. +#define BR_AIPS_PACRI_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP2. +#define BF_AIPS_PACRI_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP2), uint32_t) & BM_AIPS_PACRI_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRI_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP2 (21U) //!< Bit position for AIPS_PACRI_WP2. +#define BM_AIPS_PACRI_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRI_WP2. +#define BS_AIPS_PACRI_WP2 (1U) //!< Bit field size in bits for AIPS_PACRI_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP2 field. +#define BR_AIPS_PACRI_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP2. +#define BF_AIPS_PACRI_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP2), uint32_t) & BM_AIPS_PACRI_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRI_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP2 (22U) //!< Bit position for AIPS_PACRI_SP2. +#define BM_AIPS_PACRI_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRI_SP2. +#define BS_AIPS_PACRI_SP2 (1U) //!< Bit field size in bits for AIPS_PACRI_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP2 field. +#define BR_AIPS_PACRI_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP2. +#define BF_AIPS_PACRI_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP2), uint32_t) & BM_AIPS_PACRI_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRI_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP1 (24U) //!< Bit position for AIPS_PACRI_TP1. +#define BM_AIPS_PACRI_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRI_TP1. +#define BS_AIPS_PACRI_TP1 (1U) //!< Bit field size in bits for AIPS_PACRI_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP1 field. +#define BR_AIPS_PACRI_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP1. +#define BF_AIPS_PACRI_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP1), uint32_t) & BM_AIPS_PACRI_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRI_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP1 (25U) //!< Bit position for AIPS_PACRI_WP1. +#define BM_AIPS_PACRI_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRI_WP1. +#define BS_AIPS_PACRI_WP1 (1U) //!< Bit field size in bits for AIPS_PACRI_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP1 field. +#define BR_AIPS_PACRI_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP1. +#define BF_AIPS_PACRI_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP1), uint32_t) & BM_AIPS_PACRI_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRI_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP1 (26U) //!< Bit position for AIPS_PACRI_SP1. +#define BM_AIPS_PACRI_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRI_SP1. +#define BS_AIPS_PACRI_SP1 (1U) //!< Bit field size in bits for AIPS_PACRI_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP1 field. +#define BR_AIPS_PACRI_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP1. +#define BF_AIPS_PACRI_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP1), uint32_t) & BM_AIPS_PACRI_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRI_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRI_TP0 (28U) //!< Bit position for AIPS_PACRI_TP0. +#define BM_AIPS_PACRI_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRI_TP0. +#define BS_AIPS_PACRI_TP0 (1U) //!< Bit field size in bits for AIPS_PACRI_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_TP0 field. +#define BR_AIPS_PACRI_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_TP0. +#define BF_AIPS_PACRI_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_TP0), uint32_t) & BM_AIPS_PACRI_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRI_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRI_WP0 (29U) //!< Bit position for AIPS_PACRI_WP0. +#define BM_AIPS_PACRI_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRI_WP0. +#define BS_AIPS_PACRI_WP0 (1U) //!< Bit field size in bits for AIPS_PACRI_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_WP0 field. +#define BR_AIPS_PACRI_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_WP0. +#define BF_AIPS_PACRI_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_WP0), uint32_t) & BM_AIPS_PACRI_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRI_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRI, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRI_SP0 (30U) //!< Bit position for AIPS_PACRI_SP0. +#define BM_AIPS_PACRI_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRI_SP0. +#define BS_AIPS_PACRI_SP0 (1U) //!< Bit field size in bits for AIPS_PACRI_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRI_SP0 field. +#define BR_AIPS_PACRI_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRI_SP0. +#define BF_AIPS_PACRI_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRI_SP0), uint32_t) & BM_AIPS_PACRI_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRI_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRI_ADDR(x), BP_AIPS_PACRI_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRJ - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRJ - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrj +{ + uint32_t U; + struct _hw_aips_pacrj_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrj_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRJ register + */ +//@{ +#define HW_AIPS_PACRJ_ADDR(x) (REGS_AIPS_BASE(x) + 0x54U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRJ(x) (*(__IO hw_aips_pacrj_t *) HW_AIPS_PACRJ_ADDR(x)) +#define HW_AIPS_PACRJ_RD(x) (HW_AIPS_PACRJ(x).U) +#define HW_AIPS_PACRJ_WR(x, v) (HW_AIPS_PACRJ(x).U = (v)) +#define HW_AIPS_PACRJ_SET(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) | (v))) +#define HW_AIPS_PACRJ_CLR(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) & ~(v))) +#define HW_AIPS_PACRJ_TOG(x, v) (HW_AIPS_PACRJ_WR(x, HW_AIPS_PACRJ_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRJ bitfields + */ + +/*! + * @name Register AIPS_PACRJ, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP7 (0U) //!< Bit position for AIPS_PACRJ_TP7. +#define BM_AIPS_PACRJ_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRJ_TP7. +#define BS_AIPS_PACRJ_TP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP7 field. +#define BR_AIPS_PACRJ_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP7. +#define BF_AIPS_PACRJ_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP7), uint32_t) & BM_AIPS_PACRJ_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRJ_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP7 (1U) //!< Bit position for AIPS_PACRJ_WP7. +#define BM_AIPS_PACRJ_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRJ_WP7. +#define BS_AIPS_PACRJ_WP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP7 field. +#define BR_AIPS_PACRJ_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP7. +#define BF_AIPS_PACRJ_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP7), uint32_t) & BM_AIPS_PACRJ_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRJ_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP7 (2U) //!< Bit position for AIPS_PACRJ_SP7. +#define BM_AIPS_PACRJ_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRJ_SP7. +#define BS_AIPS_PACRJ_SP7 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP7 field. +#define BR_AIPS_PACRJ_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP7. +#define BF_AIPS_PACRJ_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP7), uint32_t) & BM_AIPS_PACRJ_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRJ_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP6 (4U) //!< Bit position for AIPS_PACRJ_TP6. +#define BM_AIPS_PACRJ_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRJ_TP6. +#define BS_AIPS_PACRJ_TP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP6 field. +#define BR_AIPS_PACRJ_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP6. +#define BF_AIPS_PACRJ_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP6), uint32_t) & BM_AIPS_PACRJ_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRJ_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP6 (5U) //!< Bit position for AIPS_PACRJ_WP6. +#define BM_AIPS_PACRJ_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRJ_WP6. +#define BS_AIPS_PACRJ_WP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP6 field. +#define BR_AIPS_PACRJ_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP6. +#define BF_AIPS_PACRJ_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP6), uint32_t) & BM_AIPS_PACRJ_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRJ_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP6 (6U) //!< Bit position for AIPS_PACRJ_SP6. +#define BM_AIPS_PACRJ_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRJ_SP6. +#define BS_AIPS_PACRJ_SP6 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP6 field. +#define BR_AIPS_PACRJ_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP6. +#define BF_AIPS_PACRJ_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP6), uint32_t) & BM_AIPS_PACRJ_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRJ_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP5 (8U) //!< Bit position for AIPS_PACRJ_TP5. +#define BM_AIPS_PACRJ_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRJ_TP5. +#define BS_AIPS_PACRJ_TP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP5 field. +#define BR_AIPS_PACRJ_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP5. +#define BF_AIPS_PACRJ_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP5), uint32_t) & BM_AIPS_PACRJ_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRJ_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP5 (9U) //!< Bit position for AIPS_PACRJ_WP5. +#define BM_AIPS_PACRJ_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRJ_WP5. +#define BS_AIPS_PACRJ_WP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP5 field. +#define BR_AIPS_PACRJ_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP5. +#define BF_AIPS_PACRJ_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP5), uint32_t) & BM_AIPS_PACRJ_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRJ_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP5 (10U) //!< Bit position for AIPS_PACRJ_SP5. +#define BM_AIPS_PACRJ_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRJ_SP5. +#define BS_AIPS_PACRJ_SP5 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP5 field. +#define BR_AIPS_PACRJ_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP5. +#define BF_AIPS_PACRJ_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP5), uint32_t) & BM_AIPS_PACRJ_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRJ_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP4 (12U) //!< Bit position for AIPS_PACRJ_TP4. +#define BM_AIPS_PACRJ_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRJ_TP4. +#define BS_AIPS_PACRJ_TP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP4 field. +#define BR_AIPS_PACRJ_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP4. +#define BF_AIPS_PACRJ_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP4), uint32_t) & BM_AIPS_PACRJ_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRJ_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP4 (13U) //!< Bit position for AIPS_PACRJ_WP4. +#define BM_AIPS_PACRJ_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRJ_WP4. +#define BS_AIPS_PACRJ_WP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP4 field. +#define BR_AIPS_PACRJ_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP4. +#define BF_AIPS_PACRJ_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP4), uint32_t) & BM_AIPS_PACRJ_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRJ_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP4 (14U) //!< Bit position for AIPS_PACRJ_SP4. +#define BM_AIPS_PACRJ_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRJ_SP4. +#define BS_AIPS_PACRJ_SP4 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP4 field. +#define BR_AIPS_PACRJ_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP4. +#define BF_AIPS_PACRJ_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP4), uint32_t) & BM_AIPS_PACRJ_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRJ_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP3 (16U) //!< Bit position for AIPS_PACRJ_TP3. +#define BM_AIPS_PACRJ_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRJ_TP3. +#define BS_AIPS_PACRJ_TP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP3 field. +#define BR_AIPS_PACRJ_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP3. +#define BF_AIPS_PACRJ_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP3), uint32_t) & BM_AIPS_PACRJ_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRJ_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP3 (17U) //!< Bit position for AIPS_PACRJ_WP3. +#define BM_AIPS_PACRJ_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRJ_WP3. +#define BS_AIPS_PACRJ_WP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP3 field. +#define BR_AIPS_PACRJ_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP3. +#define BF_AIPS_PACRJ_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP3), uint32_t) & BM_AIPS_PACRJ_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRJ_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP3 (18U) //!< Bit position for AIPS_PACRJ_SP3. +#define BM_AIPS_PACRJ_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRJ_SP3. +#define BS_AIPS_PACRJ_SP3 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP3 field. +#define BR_AIPS_PACRJ_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP3. +#define BF_AIPS_PACRJ_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP3), uint32_t) & BM_AIPS_PACRJ_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRJ_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP2 (20U) //!< Bit position for AIPS_PACRJ_TP2. +#define BM_AIPS_PACRJ_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRJ_TP2. +#define BS_AIPS_PACRJ_TP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP2 field. +#define BR_AIPS_PACRJ_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP2. +#define BF_AIPS_PACRJ_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP2), uint32_t) & BM_AIPS_PACRJ_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRJ_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP2 (21U) //!< Bit position for AIPS_PACRJ_WP2. +#define BM_AIPS_PACRJ_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRJ_WP2. +#define BS_AIPS_PACRJ_WP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP2 field. +#define BR_AIPS_PACRJ_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP2. +#define BF_AIPS_PACRJ_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP2), uint32_t) & BM_AIPS_PACRJ_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRJ_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP2 (22U) //!< Bit position for AIPS_PACRJ_SP2. +#define BM_AIPS_PACRJ_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRJ_SP2. +#define BS_AIPS_PACRJ_SP2 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP2 field. +#define BR_AIPS_PACRJ_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP2. +#define BF_AIPS_PACRJ_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP2), uint32_t) & BM_AIPS_PACRJ_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRJ_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP1 (24U) //!< Bit position for AIPS_PACRJ_TP1. +#define BM_AIPS_PACRJ_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRJ_TP1. +#define BS_AIPS_PACRJ_TP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP1 field. +#define BR_AIPS_PACRJ_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP1. +#define BF_AIPS_PACRJ_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP1), uint32_t) & BM_AIPS_PACRJ_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRJ_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP1 (25U) //!< Bit position for AIPS_PACRJ_WP1. +#define BM_AIPS_PACRJ_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRJ_WP1. +#define BS_AIPS_PACRJ_WP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP1 field. +#define BR_AIPS_PACRJ_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP1. +#define BF_AIPS_PACRJ_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP1), uint32_t) & BM_AIPS_PACRJ_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRJ_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP1 (26U) //!< Bit position for AIPS_PACRJ_SP1. +#define BM_AIPS_PACRJ_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRJ_SP1. +#define BS_AIPS_PACRJ_SP1 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP1 field. +#define BR_AIPS_PACRJ_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP1. +#define BF_AIPS_PACRJ_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP1), uint32_t) & BM_AIPS_PACRJ_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRJ_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRJ_TP0 (28U) //!< Bit position for AIPS_PACRJ_TP0. +#define BM_AIPS_PACRJ_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRJ_TP0. +#define BS_AIPS_PACRJ_TP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_TP0 field. +#define BR_AIPS_PACRJ_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_TP0. +#define BF_AIPS_PACRJ_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_TP0), uint32_t) & BM_AIPS_PACRJ_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRJ_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRJ_WP0 (29U) //!< Bit position for AIPS_PACRJ_WP0. +#define BM_AIPS_PACRJ_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRJ_WP0. +#define BS_AIPS_PACRJ_WP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_WP0 field. +#define BR_AIPS_PACRJ_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_WP0. +#define BF_AIPS_PACRJ_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_WP0), uint32_t) & BM_AIPS_PACRJ_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRJ_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRJ, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRJ_SP0 (30U) //!< Bit position for AIPS_PACRJ_SP0. +#define BM_AIPS_PACRJ_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRJ_SP0. +#define BS_AIPS_PACRJ_SP0 (1U) //!< Bit field size in bits for AIPS_PACRJ_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRJ_SP0 field. +#define BR_AIPS_PACRJ_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRJ_SP0. +#define BF_AIPS_PACRJ_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRJ_SP0), uint32_t) & BM_AIPS_PACRJ_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRJ_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRJ_ADDR(x), BP_AIPS_PACRJ_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRK - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRK - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrk +{ + uint32_t U; + struct _hw_aips_pacrk_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrk_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRK register + */ +//@{ +#define HW_AIPS_PACRK_ADDR(x) (REGS_AIPS_BASE(x) + 0x58U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRK(x) (*(__IO hw_aips_pacrk_t *) HW_AIPS_PACRK_ADDR(x)) +#define HW_AIPS_PACRK_RD(x) (HW_AIPS_PACRK(x).U) +#define HW_AIPS_PACRK_WR(x, v) (HW_AIPS_PACRK(x).U = (v)) +#define HW_AIPS_PACRK_SET(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) | (v))) +#define HW_AIPS_PACRK_CLR(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) & ~(v))) +#define HW_AIPS_PACRK_TOG(x, v) (HW_AIPS_PACRK_WR(x, HW_AIPS_PACRK_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRK bitfields + */ + +/*! + * @name Register AIPS_PACRK, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP7 (0U) //!< Bit position for AIPS_PACRK_TP7. +#define BM_AIPS_PACRK_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRK_TP7. +#define BS_AIPS_PACRK_TP7 (1U) //!< Bit field size in bits for AIPS_PACRK_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP7 field. +#define BR_AIPS_PACRK_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP7. +#define BF_AIPS_PACRK_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP7), uint32_t) & BM_AIPS_PACRK_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRK_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP7 (1U) //!< Bit position for AIPS_PACRK_WP7. +#define BM_AIPS_PACRK_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRK_WP7. +#define BS_AIPS_PACRK_WP7 (1U) //!< Bit field size in bits for AIPS_PACRK_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP7 field. +#define BR_AIPS_PACRK_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP7. +#define BF_AIPS_PACRK_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP7), uint32_t) & BM_AIPS_PACRK_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRK_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP7 (2U) //!< Bit position for AIPS_PACRK_SP7. +#define BM_AIPS_PACRK_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRK_SP7. +#define BS_AIPS_PACRK_SP7 (1U) //!< Bit field size in bits for AIPS_PACRK_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP7 field. +#define BR_AIPS_PACRK_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP7. +#define BF_AIPS_PACRK_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP7), uint32_t) & BM_AIPS_PACRK_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRK_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP6 (4U) //!< Bit position for AIPS_PACRK_TP6. +#define BM_AIPS_PACRK_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRK_TP6. +#define BS_AIPS_PACRK_TP6 (1U) //!< Bit field size in bits for AIPS_PACRK_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP6 field. +#define BR_AIPS_PACRK_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP6. +#define BF_AIPS_PACRK_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP6), uint32_t) & BM_AIPS_PACRK_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRK_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP6 (5U) //!< Bit position for AIPS_PACRK_WP6. +#define BM_AIPS_PACRK_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRK_WP6. +#define BS_AIPS_PACRK_WP6 (1U) //!< Bit field size in bits for AIPS_PACRK_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP6 field. +#define BR_AIPS_PACRK_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP6. +#define BF_AIPS_PACRK_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP6), uint32_t) & BM_AIPS_PACRK_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRK_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP6 (6U) //!< Bit position for AIPS_PACRK_SP6. +#define BM_AIPS_PACRK_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRK_SP6. +#define BS_AIPS_PACRK_SP6 (1U) //!< Bit field size in bits for AIPS_PACRK_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP6 field. +#define BR_AIPS_PACRK_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP6. +#define BF_AIPS_PACRK_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP6), uint32_t) & BM_AIPS_PACRK_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRK_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP5 (8U) //!< Bit position for AIPS_PACRK_TP5. +#define BM_AIPS_PACRK_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRK_TP5. +#define BS_AIPS_PACRK_TP5 (1U) //!< Bit field size in bits for AIPS_PACRK_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP5 field. +#define BR_AIPS_PACRK_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP5. +#define BF_AIPS_PACRK_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP5), uint32_t) & BM_AIPS_PACRK_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRK_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP5 (9U) //!< Bit position for AIPS_PACRK_WP5. +#define BM_AIPS_PACRK_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRK_WP5. +#define BS_AIPS_PACRK_WP5 (1U) //!< Bit field size in bits for AIPS_PACRK_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP5 field. +#define BR_AIPS_PACRK_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP5. +#define BF_AIPS_PACRK_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP5), uint32_t) & BM_AIPS_PACRK_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRK_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP5 (10U) //!< Bit position for AIPS_PACRK_SP5. +#define BM_AIPS_PACRK_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRK_SP5. +#define BS_AIPS_PACRK_SP5 (1U) //!< Bit field size in bits for AIPS_PACRK_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP5 field. +#define BR_AIPS_PACRK_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP5. +#define BF_AIPS_PACRK_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP5), uint32_t) & BM_AIPS_PACRK_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRK_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP4 (12U) //!< Bit position for AIPS_PACRK_TP4. +#define BM_AIPS_PACRK_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRK_TP4. +#define BS_AIPS_PACRK_TP4 (1U) //!< Bit field size in bits for AIPS_PACRK_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP4 field. +#define BR_AIPS_PACRK_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP4. +#define BF_AIPS_PACRK_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP4), uint32_t) & BM_AIPS_PACRK_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRK_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP4 (13U) //!< Bit position for AIPS_PACRK_WP4. +#define BM_AIPS_PACRK_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRK_WP4. +#define BS_AIPS_PACRK_WP4 (1U) //!< Bit field size in bits for AIPS_PACRK_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP4 field. +#define BR_AIPS_PACRK_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP4. +#define BF_AIPS_PACRK_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP4), uint32_t) & BM_AIPS_PACRK_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRK_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP4 (14U) //!< Bit position for AIPS_PACRK_SP4. +#define BM_AIPS_PACRK_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRK_SP4. +#define BS_AIPS_PACRK_SP4 (1U) //!< Bit field size in bits for AIPS_PACRK_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP4 field. +#define BR_AIPS_PACRK_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP4. +#define BF_AIPS_PACRK_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP4), uint32_t) & BM_AIPS_PACRK_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRK_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP3 (16U) //!< Bit position for AIPS_PACRK_TP3. +#define BM_AIPS_PACRK_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRK_TP3. +#define BS_AIPS_PACRK_TP3 (1U) //!< Bit field size in bits for AIPS_PACRK_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP3 field. +#define BR_AIPS_PACRK_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP3. +#define BF_AIPS_PACRK_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP3), uint32_t) & BM_AIPS_PACRK_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRK_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP3 (17U) //!< Bit position for AIPS_PACRK_WP3. +#define BM_AIPS_PACRK_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRK_WP3. +#define BS_AIPS_PACRK_WP3 (1U) //!< Bit field size in bits for AIPS_PACRK_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP3 field. +#define BR_AIPS_PACRK_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP3. +#define BF_AIPS_PACRK_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP3), uint32_t) & BM_AIPS_PACRK_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRK_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP3 (18U) //!< Bit position for AIPS_PACRK_SP3. +#define BM_AIPS_PACRK_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRK_SP3. +#define BS_AIPS_PACRK_SP3 (1U) //!< Bit field size in bits for AIPS_PACRK_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP3 field. +#define BR_AIPS_PACRK_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP3. +#define BF_AIPS_PACRK_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP3), uint32_t) & BM_AIPS_PACRK_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRK_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP2 (20U) //!< Bit position for AIPS_PACRK_TP2. +#define BM_AIPS_PACRK_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRK_TP2. +#define BS_AIPS_PACRK_TP2 (1U) //!< Bit field size in bits for AIPS_PACRK_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP2 field. +#define BR_AIPS_PACRK_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP2. +#define BF_AIPS_PACRK_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP2), uint32_t) & BM_AIPS_PACRK_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRK_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP2 (21U) //!< Bit position for AIPS_PACRK_WP2. +#define BM_AIPS_PACRK_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRK_WP2. +#define BS_AIPS_PACRK_WP2 (1U) //!< Bit field size in bits for AIPS_PACRK_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP2 field. +#define BR_AIPS_PACRK_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP2. +#define BF_AIPS_PACRK_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP2), uint32_t) & BM_AIPS_PACRK_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRK_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP2 (22U) //!< Bit position for AIPS_PACRK_SP2. +#define BM_AIPS_PACRK_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRK_SP2. +#define BS_AIPS_PACRK_SP2 (1U) //!< Bit field size in bits for AIPS_PACRK_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP2 field. +#define BR_AIPS_PACRK_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP2. +#define BF_AIPS_PACRK_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP2), uint32_t) & BM_AIPS_PACRK_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRK_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP1 (24U) //!< Bit position for AIPS_PACRK_TP1. +#define BM_AIPS_PACRK_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRK_TP1. +#define BS_AIPS_PACRK_TP1 (1U) //!< Bit field size in bits for AIPS_PACRK_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP1 field. +#define BR_AIPS_PACRK_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP1. +#define BF_AIPS_PACRK_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP1), uint32_t) & BM_AIPS_PACRK_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRK_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP1 (25U) //!< Bit position for AIPS_PACRK_WP1. +#define BM_AIPS_PACRK_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRK_WP1. +#define BS_AIPS_PACRK_WP1 (1U) //!< Bit field size in bits for AIPS_PACRK_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP1 field. +#define BR_AIPS_PACRK_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP1. +#define BF_AIPS_PACRK_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP1), uint32_t) & BM_AIPS_PACRK_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRK_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP1 (26U) //!< Bit position for AIPS_PACRK_SP1. +#define BM_AIPS_PACRK_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRK_SP1. +#define BS_AIPS_PACRK_SP1 (1U) //!< Bit field size in bits for AIPS_PACRK_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP1 field. +#define BR_AIPS_PACRK_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP1. +#define BF_AIPS_PACRK_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP1), uint32_t) & BM_AIPS_PACRK_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRK_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRK_TP0 (28U) //!< Bit position for AIPS_PACRK_TP0. +#define BM_AIPS_PACRK_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRK_TP0. +#define BS_AIPS_PACRK_TP0 (1U) //!< Bit field size in bits for AIPS_PACRK_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_TP0 field. +#define BR_AIPS_PACRK_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_TP0. +#define BF_AIPS_PACRK_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_TP0), uint32_t) & BM_AIPS_PACRK_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRK_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRK_WP0 (29U) //!< Bit position for AIPS_PACRK_WP0. +#define BM_AIPS_PACRK_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRK_WP0. +#define BS_AIPS_PACRK_WP0 (1U) //!< Bit field size in bits for AIPS_PACRK_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_WP0 field. +#define BR_AIPS_PACRK_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_WP0. +#define BF_AIPS_PACRK_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_WP0), uint32_t) & BM_AIPS_PACRK_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRK_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRK, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRK_SP0 (30U) //!< Bit position for AIPS_PACRK_SP0. +#define BM_AIPS_PACRK_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRK_SP0. +#define BS_AIPS_PACRK_SP0 (1U) //!< Bit field size in bits for AIPS_PACRK_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRK_SP0 field. +#define BR_AIPS_PACRK_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRK_SP0. +#define BF_AIPS_PACRK_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRK_SP0), uint32_t) & BM_AIPS_PACRK_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRK_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRK_ADDR(x), BP_AIPS_PACRK_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRL - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRL - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrl +{ + uint32_t U; + struct _hw_aips_pacrl_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrl_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRL register + */ +//@{ +#define HW_AIPS_PACRL_ADDR(x) (REGS_AIPS_BASE(x) + 0x5CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRL(x) (*(__IO hw_aips_pacrl_t *) HW_AIPS_PACRL_ADDR(x)) +#define HW_AIPS_PACRL_RD(x) (HW_AIPS_PACRL(x).U) +#define HW_AIPS_PACRL_WR(x, v) (HW_AIPS_PACRL(x).U = (v)) +#define HW_AIPS_PACRL_SET(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) | (v))) +#define HW_AIPS_PACRL_CLR(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) & ~(v))) +#define HW_AIPS_PACRL_TOG(x, v) (HW_AIPS_PACRL_WR(x, HW_AIPS_PACRL_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRL bitfields + */ + +/*! + * @name Register AIPS_PACRL, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP7 (0U) //!< Bit position for AIPS_PACRL_TP7. +#define BM_AIPS_PACRL_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRL_TP7. +#define BS_AIPS_PACRL_TP7 (1U) //!< Bit field size in bits for AIPS_PACRL_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP7 field. +#define BR_AIPS_PACRL_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP7. +#define BF_AIPS_PACRL_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP7), uint32_t) & BM_AIPS_PACRL_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRL_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP7 (1U) //!< Bit position for AIPS_PACRL_WP7. +#define BM_AIPS_PACRL_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRL_WP7. +#define BS_AIPS_PACRL_WP7 (1U) //!< Bit field size in bits for AIPS_PACRL_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP7 field. +#define BR_AIPS_PACRL_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP7. +#define BF_AIPS_PACRL_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP7), uint32_t) & BM_AIPS_PACRL_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRL_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP7 (2U) //!< Bit position for AIPS_PACRL_SP7. +#define BM_AIPS_PACRL_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRL_SP7. +#define BS_AIPS_PACRL_SP7 (1U) //!< Bit field size in bits for AIPS_PACRL_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP7 field. +#define BR_AIPS_PACRL_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP7. +#define BF_AIPS_PACRL_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP7), uint32_t) & BM_AIPS_PACRL_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRL_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP6 (4U) //!< Bit position for AIPS_PACRL_TP6. +#define BM_AIPS_PACRL_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRL_TP6. +#define BS_AIPS_PACRL_TP6 (1U) //!< Bit field size in bits for AIPS_PACRL_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP6 field. +#define BR_AIPS_PACRL_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP6. +#define BF_AIPS_PACRL_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP6), uint32_t) & BM_AIPS_PACRL_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRL_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP6 (5U) //!< Bit position for AIPS_PACRL_WP6. +#define BM_AIPS_PACRL_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRL_WP6. +#define BS_AIPS_PACRL_WP6 (1U) //!< Bit field size in bits for AIPS_PACRL_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP6 field. +#define BR_AIPS_PACRL_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP6. +#define BF_AIPS_PACRL_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP6), uint32_t) & BM_AIPS_PACRL_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRL_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP6 (6U) //!< Bit position for AIPS_PACRL_SP6. +#define BM_AIPS_PACRL_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRL_SP6. +#define BS_AIPS_PACRL_SP6 (1U) //!< Bit field size in bits for AIPS_PACRL_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP6 field. +#define BR_AIPS_PACRL_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP6. +#define BF_AIPS_PACRL_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP6), uint32_t) & BM_AIPS_PACRL_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRL_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP5 (8U) //!< Bit position for AIPS_PACRL_TP5. +#define BM_AIPS_PACRL_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRL_TP5. +#define BS_AIPS_PACRL_TP5 (1U) //!< Bit field size in bits for AIPS_PACRL_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP5 field. +#define BR_AIPS_PACRL_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP5. +#define BF_AIPS_PACRL_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP5), uint32_t) & BM_AIPS_PACRL_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRL_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP5 (9U) //!< Bit position for AIPS_PACRL_WP5. +#define BM_AIPS_PACRL_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRL_WP5. +#define BS_AIPS_PACRL_WP5 (1U) //!< Bit field size in bits for AIPS_PACRL_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP5 field. +#define BR_AIPS_PACRL_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP5. +#define BF_AIPS_PACRL_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP5), uint32_t) & BM_AIPS_PACRL_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRL_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP5 (10U) //!< Bit position for AIPS_PACRL_SP5. +#define BM_AIPS_PACRL_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRL_SP5. +#define BS_AIPS_PACRL_SP5 (1U) //!< Bit field size in bits for AIPS_PACRL_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP5 field. +#define BR_AIPS_PACRL_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP5. +#define BF_AIPS_PACRL_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP5), uint32_t) & BM_AIPS_PACRL_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRL_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP4 (12U) //!< Bit position for AIPS_PACRL_TP4. +#define BM_AIPS_PACRL_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRL_TP4. +#define BS_AIPS_PACRL_TP4 (1U) //!< Bit field size in bits for AIPS_PACRL_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP4 field. +#define BR_AIPS_PACRL_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP4. +#define BF_AIPS_PACRL_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP4), uint32_t) & BM_AIPS_PACRL_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRL_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP4 (13U) //!< Bit position for AIPS_PACRL_WP4. +#define BM_AIPS_PACRL_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRL_WP4. +#define BS_AIPS_PACRL_WP4 (1U) //!< Bit field size in bits for AIPS_PACRL_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP4 field. +#define BR_AIPS_PACRL_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP4. +#define BF_AIPS_PACRL_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP4), uint32_t) & BM_AIPS_PACRL_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRL_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP4 (14U) //!< Bit position for AIPS_PACRL_SP4. +#define BM_AIPS_PACRL_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRL_SP4. +#define BS_AIPS_PACRL_SP4 (1U) //!< Bit field size in bits for AIPS_PACRL_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP4 field. +#define BR_AIPS_PACRL_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP4. +#define BF_AIPS_PACRL_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP4), uint32_t) & BM_AIPS_PACRL_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRL_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP3 (16U) //!< Bit position for AIPS_PACRL_TP3. +#define BM_AIPS_PACRL_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRL_TP3. +#define BS_AIPS_PACRL_TP3 (1U) //!< Bit field size in bits for AIPS_PACRL_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP3 field. +#define BR_AIPS_PACRL_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP3. +#define BF_AIPS_PACRL_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP3), uint32_t) & BM_AIPS_PACRL_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRL_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP3 (17U) //!< Bit position for AIPS_PACRL_WP3. +#define BM_AIPS_PACRL_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRL_WP3. +#define BS_AIPS_PACRL_WP3 (1U) //!< Bit field size in bits for AIPS_PACRL_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP3 field. +#define BR_AIPS_PACRL_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP3. +#define BF_AIPS_PACRL_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP3), uint32_t) & BM_AIPS_PACRL_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRL_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP3 (18U) //!< Bit position for AIPS_PACRL_SP3. +#define BM_AIPS_PACRL_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRL_SP3. +#define BS_AIPS_PACRL_SP3 (1U) //!< Bit field size in bits for AIPS_PACRL_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP3 field. +#define BR_AIPS_PACRL_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP3. +#define BF_AIPS_PACRL_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP3), uint32_t) & BM_AIPS_PACRL_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRL_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP2 (20U) //!< Bit position for AIPS_PACRL_TP2. +#define BM_AIPS_PACRL_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRL_TP2. +#define BS_AIPS_PACRL_TP2 (1U) //!< Bit field size in bits for AIPS_PACRL_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP2 field. +#define BR_AIPS_PACRL_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP2. +#define BF_AIPS_PACRL_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP2), uint32_t) & BM_AIPS_PACRL_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRL_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP2 (21U) //!< Bit position for AIPS_PACRL_WP2. +#define BM_AIPS_PACRL_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRL_WP2. +#define BS_AIPS_PACRL_WP2 (1U) //!< Bit field size in bits for AIPS_PACRL_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP2 field. +#define BR_AIPS_PACRL_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP2. +#define BF_AIPS_PACRL_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP2), uint32_t) & BM_AIPS_PACRL_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRL_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP2 (22U) //!< Bit position for AIPS_PACRL_SP2. +#define BM_AIPS_PACRL_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRL_SP2. +#define BS_AIPS_PACRL_SP2 (1U) //!< Bit field size in bits for AIPS_PACRL_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP2 field. +#define BR_AIPS_PACRL_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP2. +#define BF_AIPS_PACRL_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP2), uint32_t) & BM_AIPS_PACRL_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRL_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP1 (24U) //!< Bit position for AIPS_PACRL_TP1. +#define BM_AIPS_PACRL_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRL_TP1. +#define BS_AIPS_PACRL_TP1 (1U) //!< Bit field size in bits for AIPS_PACRL_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP1 field. +#define BR_AIPS_PACRL_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP1. +#define BF_AIPS_PACRL_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP1), uint32_t) & BM_AIPS_PACRL_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRL_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP1 (25U) //!< Bit position for AIPS_PACRL_WP1. +#define BM_AIPS_PACRL_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRL_WP1. +#define BS_AIPS_PACRL_WP1 (1U) //!< Bit field size in bits for AIPS_PACRL_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP1 field. +#define BR_AIPS_PACRL_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP1. +#define BF_AIPS_PACRL_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP1), uint32_t) & BM_AIPS_PACRL_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRL_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP1 (26U) //!< Bit position for AIPS_PACRL_SP1. +#define BM_AIPS_PACRL_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRL_SP1. +#define BS_AIPS_PACRL_SP1 (1U) //!< Bit field size in bits for AIPS_PACRL_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP1 field. +#define BR_AIPS_PACRL_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP1. +#define BF_AIPS_PACRL_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP1), uint32_t) & BM_AIPS_PACRL_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRL_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRL_TP0 (28U) //!< Bit position for AIPS_PACRL_TP0. +#define BM_AIPS_PACRL_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRL_TP0. +#define BS_AIPS_PACRL_TP0 (1U) //!< Bit field size in bits for AIPS_PACRL_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_TP0 field. +#define BR_AIPS_PACRL_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_TP0. +#define BF_AIPS_PACRL_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_TP0), uint32_t) & BM_AIPS_PACRL_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRL_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRL_WP0 (29U) //!< Bit position for AIPS_PACRL_WP0. +#define BM_AIPS_PACRL_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRL_WP0. +#define BS_AIPS_PACRL_WP0 (1U) //!< Bit field size in bits for AIPS_PACRL_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_WP0 field. +#define BR_AIPS_PACRL_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_WP0. +#define BF_AIPS_PACRL_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_WP0), uint32_t) & BM_AIPS_PACRL_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRL_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRL, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRL_SP0 (30U) //!< Bit position for AIPS_PACRL_SP0. +#define BM_AIPS_PACRL_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRL_SP0. +#define BS_AIPS_PACRL_SP0 (1U) //!< Bit field size in bits for AIPS_PACRL_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRL_SP0 field. +#define BR_AIPS_PACRL_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRL_SP0. +#define BF_AIPS_PACRL_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRL_SP0), uint32_t) & BM_AIPS_PACRL_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRL_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRL_ADDR(x), BP_AIPS_PACRL_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRM - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRM - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrm +{ + uint32_t U; + struct _hw_aips_pacrm_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrm_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRM register + */ +//@{ +#define HW_AIPS_PACRM_ADDR(x) (REGS_AIPS_BASE(x) + 0x60U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRM(x) (*(__IO hw_aips_pacrm_t *) HW_AIPS_PACRM_ADDR(x)) +#define HW_AIPS_PACRM_RD(x) (HW_AIPS_PACRM(x).U) +#define HW_AIPS_PACRM_WR(x, v) (HW_AIPS_PACRM(x).U = (v)) +#define HW_AIPS_PACRM_SET(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) | (v))) +#define HW_AIPS_PACRM_CLR(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) & ~(v))) +#define HW_AIPS_PACRM_TOG(x, v) (HW_AIPS_PACRM_WR(x, HW_AIPS_PACRM_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRM bitfields + */ + +/*! + * @name Register AIPS_PACRM, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP7 (0U) //!< Bit position for AIPS_PACRM_TP7. +#define BM_AIPS_PACRM_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRM_TP7. +#define BS_AIPS_PACRM_TP7 (1U) //!< Bit field size in bits for AIPS_PACRM_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP7 field. +#define BR_AIPS_PACRM_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP7. +#define BF_AIPS_PACRM_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP7), uint32_t) & BM_AIPS_PACRM_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRM_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP7 (1U) //!< Bit position for AIPS_PACRM_WP7. +#define BM_AIPS_PACRM_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRM_WP7. +#define BS_AIPS_PACRM_WP7 (1U) //!< Bit field size in bits for AIPS_PACRM_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP7 field. +#define BR_AIPS_PACRM_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP7. +#define BF_AIPS_PACRM_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP7), uint32_t) & BM_AIPS_PACRM_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRM_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP7 (2U) //!< Bit position for AIPS_PACRM_SP7. +#define BM_AIPS_PACRM_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRM_SP7. +#define BS_AIPS_PACRM_SP7 (1U) //!< Bit field size in bits for AIPS_PACRM_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP7 field. +#define BR_AIPS_PACRM_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP7. +#define BF_AIPS_PACRM_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP7), uint32_t) & BM_AIPS_PACRM_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRM_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP6 (4U) //!< Bit position for AIPS_PACRM_TP6. +#define BM_AIPS_PACRM_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRM_TP6. +#define BS_AIPS_PACRM_TP6 (1U) //!< Bit field size in bits for AIPS_PACRM_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP6 field. +#define BR_AIPS_PACRM_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP6. +#define BF_AIPS_PACRM_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP6), uint32_t) & BM_AIPS_PACRM_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRM_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP6 (5U) //!< Bit position for AIPS_PACRM_WP6. +#define BM_AIPS_PACRM_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRM_WP6. +#define BS_AIPS_PACRM_WP6 (1U) //!< Bit field size in bits for AIPS_PACRM_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP6 field. +#define BR_AIPS_PACRM_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP6. +#define BF_AIPS_PACRM_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP6), uint32_t) & BM_AIPS_PACRM_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRM_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP6 (6U) //!< Bit position for AIPS_PACRM_SP6. +#define BM_AIPS_PACRM_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRM_SP6. +#define BS_AIPS_PACRM_SP6 (1U) //!< Bit field size in bits for AIPS_PACRM_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP6 field. +#define BR_AIPS_PACRM_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP6. +#define BF_AIPS_PACRM_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP6), uint32_t) & BM_AIPS_PACRM_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRM_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP5 (8U) //!< Bit position for AIPS_PACRM_TP5. +#define BM_AIPS_PACRM_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRM_TP5. +#define BS_AIPS_PACRM_TP5 (1U) //!< Bit field size in bits for AIPS_PACRM_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP5 field. +#define BR_AIPS_PACRM_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP5. +#define BF_AIPS_PACRM_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP5), uint32_t) & BM_AIPS_PACRM_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRM_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP5 (9U) //!< Bit position for AIPS_PACRM_WP5. +#define BM_AIPS_PACRM_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRM_WP5. +#define BS_AIPS_PACRM_WP5 (1U) //!< Bit field size in bits for AIPS_PACRM_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP5 field. +#define BR_AIPS_PACRM_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP5. +#define BF_AIPS_PACRM_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP5), uint32_t) & BM_AIPS_PACRM_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRM_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP5 (10U) //!< Bit position for AIPS_PACRM_SP5. +#define BM_AIPS_PACRM_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRM_SP5. +#define BS_AIPS_PACRM_SP5 (1U) //!< Bit field size in bits for AIPS_PACRM_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP5 field. +#define BR_AIPS_PACRM_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP5. +#define BF_AIPS_PACRM_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP5), uint32_t) & BM_AIPS_PACRM_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRM_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP4 (12U) //!< Bit position for AIPS_PACRM_TP4. +#define BM_AIPS_PACRM_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRM_TP4. +#define BS_AIPS_PACRM_TP4 (1U) //!< Bit field size in bits for AIPS_PACRM_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP4 field. +#define BR_AIPS_PACRM_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP4. +#define BF_AIPS_PACRM_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP4), uint32_t) & BM_AIPS_PACRM_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRM_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP4 (13U) //!< Bit position for AIPS_PACRM_WP4. +#define BM_AIPS_PACRM_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRM_WP4. +#define BS_AIPS_PACRM_WP4 (1U) //!< Bit field size in bits for AIPS_PACRM_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP4 field. +#define BR_AIPS_PACRM_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP4. +#define BF_AIPS_PACRM_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP4), uint32_t) & BM_AIPS_PACRM_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRM_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP4 (14U) //!< Bit position for AIPS_PACRM_SP4. +#define BM_AIPS_PACRM_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRM_SP4. +#define BS_AIPS_PACRM_SP4 (1U) //!< Bit field size in bits for AIPS_PACRM_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP4 field. +#define BR_AIPS_PACRM_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP4. +#define BF_AIPS_PACRM_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP4), uint32_t) & BM_AIPS_PACRM_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRM_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP3 (16U) //!< Bit position for AIPS_PACRM_TP3. +#define BM_AIPS_PACRM_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRM_TP3. +#define BS_AIPS_PACRM_TP3 (1U) //!< Bit field size in bits for AIPS_PACRM_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP3 field. +#define BR_AIPS_PACRM_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP3. +#define BF_AIPS_PACRM_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP3), uint32_t) & BM_AIPS_PACRM_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRM_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP3 (17U) //!< Bit position for AIPS_PACRM_WP3. +#define BM_AIPS_PACRM_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRM_WP3. +#define BS_AIPS_PACRM_WP3 (1U) //!< Bit field size in bits for AIPS_PACRM_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP3 field. +#define BR_AIPS_PACRM_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP3. +#define BF_AIPS_PACRM_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP3), uint32_t) & BM_AIPS_PACRM_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRM_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP3 (18U) //!< Bit position for AIPS_PACRM_SP3. +#define BM_AIPS_PACRM_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRM_SP3. +#define BS_AIPS_PACRM_SP3 (1U) //!< Bit field size in bits for AIPS_PACRM_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP3 field. +#define BR_AIPS_PACRM_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP3. +#define BF_AIPS_PACRM_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP3), uint32_t) & BM_AIPS_PACRM_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRM_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP2 (20U) //!< Bit position for AIPS_PACRM_TP2. +#define BM_AIPS_PACRM_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRM_TP2. +#define BS_AIPS_PACRM_TP2 (1U) //!< Bit field size in bits for AIPS_PACRM_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP2 field. +#define BR_AIPS_PACRM_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP2. +#define BF_AIPS_PACRM_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP2), uint32_t) & BM_AIPS_PACRM_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRM_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP2 (21U) //!< Bit position for AIPS_PACRM_WP2. +#define BM_AIPS_PACRM_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRM_WP2. +#define BS_AIPS_PACRM_WP2 (1U) //!< Bit field size in bits for AIPS_PACRM_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP2 field. +#define BR_AIPS_PACRM_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP2. +#define BF_AIPS_PACRM_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP2), uint32_t) & BM_AIPS_PACRM_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRM_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP2 (22U) //!< Bit position for AIPS_PACRM_SP2. +#define BM_AIPS_PACRM_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRM_SP2. +#define BS_AIPS_PACRM_SP2 (1U) //!< Bit field size in bits for AIPS_PACRM_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP2 field. +#define BR_AIPS_PACRM_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP2. +#define BF_AIPS_PACRM_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP2), uint32_t) & BM_AIPS_PACRM_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRM_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP1 (24U) //!< Bit position for AIPS_PACRM_TP1. +#define BM_AIPS_PACRM_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRM_TP1. +#define BS_AIPS_PACRM_TP1 (1U) //!< Bit field size in bits for AIPS_PACRM_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP1 field. +#define BR_AIPS_PACRM_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP1. +#define BF_AIPS_PACRM_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP1), uint32_t) & BM_AIPS_PACRM_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRM_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP1 (25U) //!< Bit position for AIPS_PACRM_WP1. +#define BM_AIPS_PACRM_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRM_WP1. +#define BS_AIPS_PACRM_WP1 (1U) //!< Bit field size in bits for AIPS_PACRM_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP1 field. +#define BR_AIPS_PACRM_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP1. +#define BF_AIPS_PACRM_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP1), uint32_t) & BM_AIPS_PACRM_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRM_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP1 (26U) //!< Bit position for AIPS_PACRM_SP1. +#define BM_AIPS_PACRM_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRM_SP1. +#define BS_AIPS_PACRM_SP1 (1U) //!< Bit field size in bits for AIPS_PACRM_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP1 field. +#define BR_AIPS_PACRM_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP1. +#define BF_AIPS_PACRM_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP1), uint32_t) & BM_AIPS_PACRM_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRM_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRM_TP0 (28U) //!< Bit position for AIPS_PACRM_TP0. +#define BM_AIPS_PACRM_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRM_TP0. +#define BS_AIPS_PACRM_TP0 (1U) //!< Bit field size in bits for AIPS_PACRM_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_TP0 field. +#define BR_AIPS_PACRM_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_TP0. +#define BF_AIPS_PACRM_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_TP0), uint32_t) & BM_AIPS_PACRM_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRM_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRM_WP0 (29U) //!< Bit position for AIPS_PACRM_WP0. +#define BM_AIPS_PACRM_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRM_WP0. +#define BS_AIPS_PACRM_WP0 (1U) //!< Bit field size in bits for AIPS_PACRM_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_WP0 field. +#define BR_AIPS_PACRM_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_WP0. +#define BF_AIPS_PACRM_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_WP0), uint32_t) & BM_AIPS_PACRM_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRM_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRM, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRM_SP0 (30U) //!< Bit position for AIPS_PACRM_SP0. +#define BM_AIPS_PACRM_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRM_SP0. +#define BS_AIPS_PACRM_SP0 (1U) //!< Bit field size in bits for AIPS_PACRM_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRM_SP0 field. +#define BR_AIPS_PACRM_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRM_SP0. +#define BF_AIPS_PACRM_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRM_SP0), uint32_t) & BM_AIPS_PACRM_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRM_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRM_ADDR(x), BP_AIPS_PACRM_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRN - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRN - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrn +{ + uint32_t U; + struct _hw_aips_pacrn_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrn_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRN register + */ +//@{ +#define HW_AIPS_PACRN_ADDR(x) (REGS_AIPS_BASE(x) + 0x64U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRN(x) (*(__IO hw_aips_pacrn_t *) HW_AIPS_PACRN_ADDR(x)) +#define HW_AIPS_PACRN_RD(x) (HW_AIPS_PACRN(x).U) +#define HW_AIPS_PACRN_WR(x, v) (HW_AIPS_PACRN(x).U = (v)) +#define HW_AIPS_PACRN_SET(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) | (v))) +#define HW_AIPS_PACRN_CLR(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) & ~(v))) +#define HW_AIPS_PACRN_TOG(x, v) (HW_AIPS_PACRN_WR(x, HW_AIPS_PACRN_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRN bitfields + */ + +/*! + * @name Register AIPS_PACRN, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP7 (0U) //!< Bit position for AIPS_PACRN_TP7. +#define BM_AIPS_PACRN_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRN_TP7. +#define BS_AIPS_PACRN_TP7 (1U) //!< Bit field size in bits for AIPS_PACRN_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP7 field. +#define BR_AIPS_PACRN_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP7. +#define BF_AIPS_PACRN_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP7), uint32_t) & BM_AIPS_PACRN_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRN_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP7 (1U) //!< Bit position for AIPS_PACRN_WP7. +#define BM_AIPS_PACRN_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRN_WP7. +#define BS_AIPS_PACRN_WP7 (1U) //!< Bit field size in bits for AIPS_PACRN_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP7 field. +#define BR_AIPS_PACRN_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP7. +#define BF_AIPS_PACRN_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP7), uint32_t) & BM_AIPS_PACRN_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRN_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP7 (2U) //!< Bit position for AIPS_PACRN_SP7. +#define BM_AIPS_PACRN_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRN_SP7. +#define BS_AIPS_PACRN_SP7 (1U) //!< Bit field size in bits for AIPS_PACRN_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP7 field. +#define BR_AIPS_PACRN_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP7. +#define BF_AIPS_PACRN_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP7), uint32_t) & BM_AIPS_PACRN_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRN_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP6 (4U) //!< Bit position for AIPS_PACRN_TP6. +#define BM_AIPS_PACRN_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRN_TP6. +#define BS_AIPS_PACRN_TP6 (1U) //!< Bit field size in bits for AIPS_PACRN_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP6 field. +#define BR_AIPS_PACRN_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP6. +#define BF_AIPS_PACRN_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP6), uint32_t) & BM_AIPS_PACRN_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRN_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP6 (5U) //!< Bit position for AIPS_PACRN_WP6. +#define BM_AIPS_PACRN_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRN_WP6. +#define BS_AIPS_PACRN_WP6 (1U) //!< Bit field size in bits for AIPS_PACRN_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP6 field. +#define BR_AIPS_PACRN_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP6. +#define BF_AIPS_PACRN_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP6), uint32_t) & BM_AIPS_PACRN_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRN_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP6 (6U) //!< Bit position for AIPS_PACRN_SP6. +#define BM_AIPS_PACRN_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRN_SP6. +#define BS_AIPS_PACRN_SP6 (1U) //!< Bit field size in bits for AIPS_PACRN_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP6 field. +#define BR_AIPS_PACRN_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP6. +#define BF_AIPS_PACRN_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP6), uint32_t) & BM_AIPS_PACRN_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRN_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP5 (8U) //!< Bit position for AIPS_PACRN_TP5. +#define BM_AIPS_PACRN_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRN_TP5. +#define BS_AIPS_PACRN_TP5 (1U) //!< Bit field size in bits for AIPS_PACRN_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP5 field. +#define BR_AIPS_PACRN_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP5. +#define BF_AIPS_PACRN_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP5), uint32_t) & BM_AIPS_PACRN_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRN_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP5 (9U) //!< Bit position for AIPS_PACRN_WP5. +#define BM_AIPS_PACRN_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRN_WP5. +#define BS_AIPS_PACRN_WP5 (1U) //!< Bit field size in bits for AIPS_PACRN_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP5 field. +#define BR_AIPS_PACRN_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP5. +#define BF_AIPS_PACRN_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP5), uint32_t) & BM_AIPS_PACRN_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRN_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP5 (10U) //!< Bit position for AIPS_PACRN_SP5. +#define BM_AIPS_PACRN_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRN_SP5. +#define BS_AIPS_PACRN_SP5 (1U) //!< Bit field size in bits for AIPS_PACRN_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP5 field. +#define BR_AIPS_PACRN_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP5. +#define BF_AIPS_PACRN_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP5), uint32_t) & BM_AIPS_PACRN_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRN_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP4 (12U) //!< Bit position for AIPS_PACRN_TP4. +#define BM_AIPS_PACRN_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRN_TP4. +#define BS_AIPS_PACRN_TP4 (1U) //!< Bit field size in bits for AIPS_PACRN_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP4 field. +#define BR_AIPS_PACRN_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP4. +#define BF_AIPS_PACRN_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP4), uint32_t) & BM_AIPS_PACRN_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRN_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP4 (13U) //!< Bit position for AIPS_PACRN_WP4. +#define BM_AIPS_PACRN_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRN_WP4. +#define BS_AIPS_PACRN_WP4 (1U) //!< Bit field size in bits for AIPS_PACRN_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP4 field. +#define BR_AIPS_PACRN_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP4. +#define BF_AIPS_PACRN_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP4), uint32_t) & BM_AIPS_PACRN_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRN_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP4 (14U) //!< Bit position for AIPS_PACRN_SP4. +#define BM_AIPS_PACRN_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRN_SP4. +#define BS_AIPS_PACRN_SP4 (1U) //!< Bit field size in bits for AIPS_PACRN_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP4 field. +#define BR_AIPS_PACRN_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP4. +#define BF_AIPS_PACRN_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP4), uint32_t) & BM_AIPS_PACRN_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRN_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP3 (16U) //!< Bit position for AIPS_PACRN_TP3. +#define BM_AIPS_PACRN_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRN_TP3. +#define BS_AIPS_PACRN_TP3 (1U) //!< Bit field size in bits for AIPS_PACRN_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP3 field. +#define BR_AIPS_PACRN_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP3. +#define BF_AIPS_PACRN_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP3), uint32_t) & BM_AIPS_PACRN_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRN_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP3 (17U) //!< Bit position for AIPS_PACRN_WP3. +#define BM_AIPS_PACRN_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRN_WP3. +#define BS_AIPS_PACRN_WP3 (1U) //!< Bit field size in bits for AIPS_PACRN_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP3 field. +#define BR_AIPS_PACRN_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP3. +#define BF_AIPS_PACRN_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP3), uint32_t) & BM_AIPS_PACRN_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRN_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP3 (18U) //!< Bit position for AIPS_PACRN_SP3. +#define BM_AIPS_PACRN_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRN_SP3. +#define BS_AIPS_PACRN_SP3 (1U) //!< Bit field size in bits for AIPS_PACRN_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP3 field. +#define BR_AIPS_PACRN_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP3. +#define BF_AIPS_PACRN_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP3), uint32_t) & BM_AIPS_PACRN_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRN_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP2 (20U) //!< Bit position for AIPS_PACRN_TP2. +#define BM_AIPS_PACRN_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRN_TP2. +#define BS_AIPS_PACRN_TP2 (1U) //!< Bit field size in bits for AIPS_PACRN_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP2 field. +#define BR_AIPS_PACRN_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP2. +#define BF_AIPS_PACRN_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP2), uint32_t) & BM_AIPS_PACRN_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRN_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP2 (21U) //!< Bit position for AIPS_PACRN_WP2. +#define BM_AIPS_PACRN_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRN_WP2. +#define BS_AIPS_PACRN_WP2 (1U) //!< Bit field size in bits for AIPS_PACRN_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP2 field. +#define BR_AIPS_PACRN_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP2. +#define BF_AIPS_PACRN_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP2), uint32_t) & BM_AIPS_PACRN_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRN_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP2 (22U) //!< Bit position for AIPS_PACRN_SP2. +#define BM_AIPS_PACRN_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRN_SP2. +#define BS_AIPS_PACRN_SP2 (1U) //!< Bit field size in bits for AIPS_PACRN_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP2 field. +#define BR_AIPS_PACRN_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP2. +#define BF_AIPS_PACRN_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP2), uint32_t) & BM_AIPS_PACRN_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRN_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP1 (24U) //!< Bit position for AIPS_PACRN_TP1. +#define BM_AIPS_PACRN_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRN_TP1. +#define BS_AIPS_PACRN_TP1 (1U) //!< Bit field size in bits for AIPS_PACRN_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP1 field. +#define BR_AIPS_PACRN_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP1. +#define BF_AIPS_PACRN_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP1), uint32_t) & BM_AIPS_PACRN_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRN_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP1 (25U) //!< Bit position for AIPS_PACRN_WP1. +#define BM_AIPS_PACRN_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRN_WP1. +#define BS_AIPS_PACRN_WP1 (1U) //!< Bit field size in bits for AIPS_PACRN_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP1 field. +#define BR_AIPS_PACRN_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP1. +#define BF_AIPS_PACRN_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP1), uint32_t) & BM_AIPS_PACRN_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRN_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP1 (26U) //!< Bit position for AIPS_PACRN_SP1. +#define BM_AIPS_PACRN_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRN_SP1. +#define BS_AIPS_PACRN_SP1 (1U) //!< Bit field size in bits for AIPS_PACRN_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP1 field. +#define BR_AIPS_PACRN_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP1. +#define BF_AIPS_PACRN_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP1), uint32_t) & BM_AIPS_PACRN_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRN_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRN_TP0 (28U) //!< Bit position for AIPS_PACRN_TP0. +#define BM_AIPS_PACRN_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRN_TP0. +#define BS_AIPS_PACRN_TP0 (1U) //!< Bit field size in bits for AIPS_PACRN_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_TP0 field. +#define BR_AIPS_PACRN_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_TP0. +#define BF_AIPS_PACRN_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_TP0), uint32_t) & BM_AIPS_PACRN_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRN_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRN_WP0 (29U) //!< Bit position for AIPS_PACRN_WP0. +#define BM_AIPS_PACRN_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRN_WP0. +#define BS_AIPS_PACRN_WP0 (1U) //!< Bit field size in bits for AIPS_PACRN_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_WP0 field. +#define BR_AIPS_PACRN_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_WP0. +#define BF_AIPS_PACRN_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_WP0), uint32_t) & BM_AIPS_PACRN_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRN_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRN, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRN_SP0 (30U) //!< Bit position for AIPS_PACRN_SP0. +#define BM_AIPS_PACRN_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRN_SP0. +#define BS_AIPS_PACRN_SP0 (1U) //!< Bit field size in bits for AIPS_PACRN_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRN_SP0 field. +#define BR_AIPS_PACRN_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRN_SP0. +#define BF_AIPS_PACRN_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRN_SP0), uint32_t) & BM_AIPS_PACRN_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRN_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRN_ADDR(x), BP_AIPS_PACRN_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRO - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRO - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacro +{ + uint32_t U; + struct _hw_aips_pacro_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacro_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRO register + */ +//@{ +#define HW_AIPS_PACRO_ADDR(x) (REGS_AIPS_BASE(x) + 0x68U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRO(x) (*(__IO hw_aips_pacro_t *) HW_AIPS_PACRO_ADDR(x)) +#define HW_AIPS_PACRO_RD(x) (HW_AIPS_PACRO(x).U) +#define HW_AIPS_PACRO_WR(x, v) (HW_AIPS_PACRO(x).U = (v)) +#define HW_AIPS_PACRO_SET(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) | (v))) +#define HW_AIPS_PACRO_CLR(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) & ~(v))) +#define HW_AIPS_PACRO_TOG(x, v) (HW_AIPS_PACRO_WR(x, HW_AIPS_PACRO_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRO bitfields + */ + +/*! + * @name Register AIPS_PACRO, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP7 (0U) //!< Bit position for AIPS_PACRO_TP7. +#define BM_AIPS_PACRO_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRO_TP7. +#define BS_AIPS_PACRO_TP7 (1U) //!< Bit field size in bits for AIPS_PACRO_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP7 field. +#define BR_AIPS_PACRO_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP7. +#define BF_AIPS_PACRO_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP7), uint32_t) & BM_AIPS_PACRO_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRO_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP7 (1U) //!< Bit position for AIPS_PACRO_WP7. +#define BM_AIPS_PACRO_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRO_WP7. +#define BS_AIPS_PACRO_WP7 (1U) //!< Bit field size in bits for AIPS_PACRO_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP7 field. +#define BR_AIPS_PACRO_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP7. +#define BF_AIPS_PACRO_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP7), uint32_t) & BM_AIPS_PACRO_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRO_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP7 (2U) //!< Bit position for AIPS_PACRO_SP7. +#define BM_AIPS_PACRO_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRO_SP7. +#define BS_AIPS_PACRO_SP7 (1U) //!< Bit field size in bits for AIPS_PACRO_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP7 field. +#define BR_AIPS_PACRO_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP7. +#define BF_AIPS_PACRO_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP7), uint32_t) & BM_AIPS_PACRO_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRO_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP6 (4U) //!< Bit position for AIPS_PACRO_TP6. +#define BM_AIPS_PACRO_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRO_TP6. +#define BS_AIPS_PACRO_TP6 (1U) //!< Bit field size in bits for AIPS_PACRO_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP6 field. +#define BR_AIPS_PACRO_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP6. +#define BF_AIPS_PACRO_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP6), uint32_t) & BM_AIPS_PACRO_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRO_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP6 (5U) //!< Bit position for AIPS_PACRO_WP6. +#define BM_AIPS_PACRO_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRO_WP6. +#define BS_AIPS_PACRO_WP6 (1U) //!< Bit field size in bits for AIPS_PACRO_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP6 field. +#define BR_AIPS_PACRO_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP6. +#define BF_AIPS_PACRO_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP6), uint32_t) & BM_AIPS_PACRO_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRO_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP6 (6U) //!< Bit position for AIPS_PACRO_SP6. +#define BM_AIPS_PACRO_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRO_SP6. +#define BS_AIPS_PACRO_SP6 (1U) //!< Bit field size in bits for AIPS_PACRO_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP6 field. +#define BR_AIPS_PACRO_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP6. +#define BF_AIPS_PACRO_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP6), uint32_t) & BM_AIPS_PACRO_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRO_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP5 (8U) //!< Bit position for AIPS_PACRO_TP5. +#define BM_AIPS_PACRO_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRO_TP5. +#define BS_AIPS_PACRO_TP5 (1U) //!< Bit field size in bits for AIPS_PACRO_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP5 field. +#define BR_AIPS_PACRO_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP5. +#define BF_AIPS_PACRO_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP5), uint32_t) & BM_AIPS_PACRO_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRO_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP5 (9U) //!< Bit position for AIPS_PACRO_WP5. +#define BM_AIPS_PACRO_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRO_WP5. +#define BS_AIPS_PACRO_WP5 (1U) //!< Bit field size in bits for AIPS_PACRO_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP5 field. +#define BR_AIPS_PACRO_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP5. +#define BF_AIPS_PACRO_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP5), uint32_t) & BM_AIPS_PACRO_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRO_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP5 (10U) //!< Bit position for AIPS_PACRO_SP5. +#define BM_AIPS_PACRO_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRO_SP5. +#define BS_AIPS_PACRO_SP5 (1U) //!< Bit field size in bits for AIPS_PACRO_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP5 field. +#define BR_AIPS_PACRO_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP5. +#define BF_AIPS_PACRO_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP5), uint32_t) & BM_AIPS_PACRO_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRO_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP4 (12U) //!< Bit position for AIPS_PACRO_TP4. +#define BM_AIPS_PACRO_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRO_TP4. +#define BS_AIPS_PACRO_TP4 (1U) //!< Bit field size in bits for AIPS_PACRO_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP4 field. +#define BR_AIPS_PACRO_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP4. +#define BF_AIPS_PACRO_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP4), uint32_t) & BM_AIPS_PACRO_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRO_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP4 (13U) //!< Bit position for AIPS_PACRO_WP4. +#define BM_AIPS_PACRO_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRO_WP4. +#define BS_AIPS_PACRO_WP4 (1U) //!< Bit field size in bits for AIPS_PACRO_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP4 field. +#define BR_AIPS_PACRO_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP4. +#define BF_AIPS_PACRO_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP4), uint32_t) & BM_AIPS_PACRO_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRO_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP4 (14U) //!< Bit position for AIPS_PACRO_SP4. +#define BM_AIPS_PACRO_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRO_SP4. +#define BS_AIPS_PACRO_SP4 (1U) //!< Bit field size in bits for AIPS_PACRO_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP4 field. +#define BR_AIPS_PACRO_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP4. +#define BF_AIPS_PACRO_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP4), uint32_t) & BM_AIPS_PACRO_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRO_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP3 (16U) //!< Bit position for AIPS_PACRO_TP3. +#define BM_AIPS_PACRO_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRO_TP3. +#define BS_AIPS_PACRO_TP3 (1U) //!< Bit field size in bits for AIPS_PACRO_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP3 field. +#define BR_AIPS_PACRO_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP3. +#define BF_AIPS_PACRO_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP3), uint32_t) & BM_AIPS_PACRO_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRO_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP3 (17U) //!< Bit position for AIPS_PACRO_WP3. +#define BM_AIPS_PACRO_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRO_WP3. +#define BS_AIPS_PACRO_WP3 (1U) //!< Bit field size in bits for AIPS_PACRO_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP3 field. +#define BR_AIPS_PACRO_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP3. +#define BF_AIPS_PACRO_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP3), uint32_t) & BM_AIPS_PACRO_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRO_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP3 (18U) //!< Bit position for AIPS_PACRO_SP3. +#define BM_AIPS_PACRO_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRO_SP3. +#define BS_AIPS_PACRO_SP3 (1U) //!< Bit field size in bits for AIPS_PACRO_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP3 field. +#define BR_AIPS_PACRO_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP3. +#define BF_AIPS_PACRO_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP3), uint32_t) & BM_AIPS_PACRO_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRO_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP2 (20U) //!< Bit position for AIPS_PACRO_TP2. +#define BM_AIPS_PACRO_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRO_TP2. +#define BS_AIPS_PACRO_TP2 (1U) //!< Bit field size in bits for AIPS_PACRO_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP2 field. +#define BR_AIPS_PACRO_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP2. +#define BF_AIPS_PACRO_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP2), uint32_t) & BM_AIPS_PACRO_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRO_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP2 (21U) //!< Bit position for AIPS_PACRO_WP2. +#define BM_AIPS_PACRO_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRO_WP2. +#define BS_AIPS_PACRO_WP2 (1U) //!< Bit field size in bits for AIPS_PACRO_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP2 field. +#define BR_AIPS_PACRO_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP2. +#define BF_AIPS_PACRO_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP2), uint32_t) & BM_AIPS_PACRO_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRO_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP2 (22U) //!< Bit position for AIPS_PACRO_SP2. +#define BM_AIPS_PACRO_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRO_SP2. +#define BS_AIPS_PACRO_SP2 (1U) //!< Bit field size in bits for AIPS_PACRO_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP2 field. +#define BR_AIPS_PACRO_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP2. +#define BF_AIPS_PACRO_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP2), uint32_t) & BM_AIPS_PACRO_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRO_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP1 (24U) //!< Bit position for AIPS_PACRO_TP1. +#define BM_AIPS_PACRO_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRO_TP1. +#define BS_AIPS_PACRO_TP1 (1U) //!< Bit field size in bits for AIPS_PACRO_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP1 field. +#define BR_AIPS_PACRO_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP1. +#define BF_AIPS_PACRO_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP1), uint32_t) & BM_AIPS_PACRO_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRO_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP1 (25U) //!< Bit position for AIPS_PACRO_WP1. +#define BM_AIPS_PACRO_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRO_WP1. +#define BS_AIPS_PACRO_WP1 (1U) //!< Bit field size in bits for AIPS_PACRO_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP1 field. +#define BR_AIPS_PACRO_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP1. +#define BF_AIPS_PACRO_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP1), uint32_t) & BM_AIPS_PACRO_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRO_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP1 (26U) //!< Bit position for AIPS_PACRO_SP1. +#define BM_AIPS_PACRO_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRO_SP1. +#define BS_AIPS_PACRO_SP1 (1U) //!< Bit field size in bits for AIPS_PACRO_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP1 field. +#define BR_AIPS_PACRO_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP1. +#define BF_AIPS_PACRO_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP1), uint32_t) & BM_AIPS_PACRO_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRO_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRO_TP0 (28U) //!< Bit position for AIPS_PACRO_TP0. +#define BM_AIPS_PACRO_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRO_TP0. +#define BS_AIPS_PACRO_TP0 (1U) //!< Bit field size in bits for AIPS_PACRO_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_TP0 field. +#define BR_AIPS_PACRO_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_TP0. +#define BF_AIPS_PACRO_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_TP0), uint32_t) & BM_AIPS_PACRO_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRO_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRO_WP0 (29U) //!< Bit position for AIPS_PACRO_WP0. +#define BM_AIPS_PACRO_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRO_WP0. +#define BS_AIPS_PACRO_WP0 (1U) //!< Bit field size in bits for AIPS_PACRO_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_WP0 field. +#define BR_AIPS_PACRO_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_WP0. +#define BF_AIPS_PACRO_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_WP0), uint32_t) & BM_AIPS_PACRO_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRO_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRO, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRO_SP0 (30U) //!< Bit position for AIPS_PACRO_SP0. +#define BM_AIPS_PACRO_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRO_SP0. +#define BS_AIPS_PACRO_SP0 (1U) //!< Bit field size in bits for AIPS_PACRO_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRO_SP0 field. +#define BR_AIPS_PACRO_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRO_SP0. +#define BF_AIPS_PACRO_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRO_SP0), uint32_t) & BM_AIPS_PACRO_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRO_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRO_ADDR(x), BP_AIPS_PACRO_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRP - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRP - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * This section describes PACR registers E - P, which control peripheral slots + * 32 - 127. See PACRPeripheral Access Control Register for the description of + * these registers. + */ +typedef union _hw_aips_pacrp +{ + uint32_t U; + struct _hw_aips_pacrp_bitfields + { + uint32_t TP7 : 1; //!< [0] Trusted Protect + uint32_t WP7 : 1; //!< [1] Write Protect + uint32_t SP7 : 1; //!< [2] Supervisor Protect + uint32_t RESERVED0 : 1; //!< [3] + uint32_t TP6 : 1; //!< [4] Trusted Protect + uint32_t WP6 : 1; //!< [5] Write Protect + uint32_t SP6 : 1; //!< [6] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [7] + uint32_t TP5 : 1; //!< [8] Trusted Protect + uint32_t WP5 : 1; //!< [9] Write Protect + uint32_t SP5 : 1; //!< [10] Supervisor Protect + uint32_t RESERVED2 : 1; //!< [11] + uint32_t TP4 : 1; //!< [12] Trusted protect + uint32_t WP4 : 1; //!< [13] Write Protect + uint32_t SP4 : 1; //!< [14] Supervisor protect + uint32_t RESERVED3 : 1; //!< [15] + uint32_t TP3 : 1; //!< [16] Trusted Protect + uint32_t WP3 : 1; //!< [17] Write protect + uint32_t SP3 : 1; //!< [18] Supervisor Protect + uint32_t RESERVED4 : 1; //!< [19] + uint32_t TP2 : 1; //!< [20] Trusted protect + uint32_t WP2 : 1; //!< [21] Write Protect + uint32_t SP2 : 1; //!< [22] Supervisor protect + uint32_t RESERVED5 : 1; //!< [23] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write Protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED6 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor Protect + uint32_t RESERVED7 : 1; //!< [31] + } B; +} hw_aips_pacrp_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRP register + */ +//@{ +#define HW_AIPS_PACRP_ADDR(x) (REGS_AIPS_BASE(x) + 0x6CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRP(x) (*(__IO hw_aips_pacrp_t *) HW_AIPS_PACRP_ADDR(x)) +#define HW_AIPS_PACRP_RD(x) (HW_AIPS_PACRP(x).U) +#define HW_AIPS_PACRP_WR(x, v) (HW_AIPS_PACRP(x).U = (v)) +#define HW_AIPS_PACRP_SET(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) | (v))) +#define HW_AIPS_PACRP_CLR(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) & ~(v))) +#define HW_AIPS_PACRP_TOG(x, v) (HW_AIPS_PACRP_WR(x, HW_AIPS_PACRP_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRP bitfields + */ + +/*! + * @name Register AIPS_PACRP, field TP7[0] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP7 (0U) //!< Bit position for AIPS_PACRP_TP7. +#define BM_AIPS_PACRP_TP7 (0x00000001U) //!< Bit mask for AIPS_PACRP_TP7. +#define BS_AIPS_PACRP_TP7 (1U) //!< Bit field size in bits for AIPS_PACRP_TP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP7 field. +#define BR_AIPS_PACRP_TP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP7. +#define BF_AIPS_PACRP_TP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP7), uint32_t) & BM_AIPS_PACRP_TP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP7 field to a new value. +#define BW_AIPS_PACRP_TP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP7[1] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP7 (1U) //!< Bit position for AIPS_PACRP_WP7. +#define BM_AIPS_PACRP_WP7 (0x00000002U) //!< Bit mask for AIPS_PACRP_WP7. +#define BS_AIPS_PACRP_WP7 (1U) //!< Bit field size in bits for AIPS_PACRP_WP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP7 field. +#define BR_AIPS_PACRP_WP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP7. +#define BF_AIPS_PACRP_WP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP7), uint32_t) & BM_AIPS_PACRP_WP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP7 field to a new value. +#define BW_AIPS_PACRP_WP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP7[2] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP7 (2U) //!< Bit position for AIPS_PACRP_SP7. +#define BM_AIPS_PACRP_SP7 (0x00000004U) //!< Bit mask for AIPS_PACRP_SP7. +#define BS_AIPS_PACRP_SP7 (1U) //!< Bit field size in bits for AIPS_PACRP_SP7. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP7 field. +#define BR_AIPS_PACRP_SP7(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP7)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP7. +#define BF_AIPS_PACRP_SP7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP7), uint32_t) & BM_AIPS_PACRP_SP7) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP7 field to a new value. +#define BW_AIPS_PACRP_SP7(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP7) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP6[4] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP6 (4U) //!< Bit position for AIPS_PACRP_TP6. +#define BM_AIPS_PACRP_TP6 (0x00000010U) //!< Bit mask for AIPS_PACRP_TP6. +#define BS_AIPS_PACRP_TP6 (1U) //!< Bit field size in bits for AIPS_PACRP_TP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP6 field. +#define BR_AIPS_PACRP_TP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP6. +#define BF_AIPS_PACRP_TP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP6), uint32_t) & BM_AIPS_PACRP_TP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP6 field to a new value. +#define BW_AIPS_PACRP_TP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP6[5] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP6 (5U) //!< Bit position for AIPS_PACRP_WP6. +#define BM_AIPS_PACRP_WP6 (0x00000020U) //!< Bit mask for AIPS_PACRP_WP6. +#define BS_AIPS_PACRP_WP6 (1U) //!< Bit field size in bits for AIPS_PACRP_WP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP6 field. +#define BR_AIPS_PACRP_WP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP6. +#define BF_AIPS_PACRP_WP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP6), uint32_t) & BM_AIPS_PACRP_WP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP6 field to a new value. +#define BW_AIPS_PACRP_WP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP6[6] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP6 (6U) //!< Bit position for AIPS_PACRP_SP6. +#define BM_AIPS_PACRP_SP6 (0x00000040U) //!< Bit mask for AIPS_PACRP_SP6. +#define BS_AIPS_PACRP_SP6 (1U) //!< Bit field size in bits for AIPS_PACRP_SP6. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP6 field. +#define BR_AIPS_PACRP_SP6(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP6)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP6. +#define BF_AIPS_PACRP_SP6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP6), uint32_t) & BM_AIPS_PACRP_SP6) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP6 field to a new value. +#define BW_AIPS_PACRP_SP6(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP6) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP5[8] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP5 (8U) //!< Bit position for AIPS_PACRP_TP5. +#define BM_AIPS_PACRP_TP5 (0x00000100U) //!< Bit mask for AIPS_PACRP_TP5. +#define BS_AIPS_PACRP_TP5 (1U) //!< Bit field size in bits for AIPS_PACRP_TP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP5 field. +#define BR_AIPS_PACRP_TP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP5. +#define BF_AIPS_PACRP_TP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP5), uint32_t) & BM_AIPS_PACRP_TP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP5 field to a new value. +#define BW_AIPS_PACRP_TP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP5[9] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP5 (9U) //!< Bit position for AIPS_PACRP_WP5. +#define BM_AIPS_PACRP_WP5 (0x00000200U) //!< Bit mask for AIPS_PACRP_WP5. +#define BS_AIPS_PACRP_WP5 (1U) //!< Bit field size in bits for AIPS_PACRP_WP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP5 field. +#define BR_AIPS_PACRP_WP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP5. +#define BF_AIPS_PACRP_WP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP5), uint32_t) & BM_AIPS_PACRP_WP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP5 field to a new value. +#define BW_AIPS_PACRP_WP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP5[10] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP5 (10U) //!< Bit position for AIPS_PACRP_SP5. +#define BM_AIPS_PACRP_SP5 (0x00000400U) //!< Bit mask for AIPS_PACRP_SP5. +#define BS_AIPS_PACRP_SP5 (1U) //!< Bit field size in bits for AIPS_PACRP_SP5. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP5 field. +#define BR_AIPS_PACRP_SP5(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP5)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP5. +#define BF_AIPS_PACRP_SP5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP5), uint32_t) & BM_AIPS_PACRP_SP5) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP5 field to a new value. +#define BW_AIPS_PACRP_SP5(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP5) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP4[12] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP4 (12U) //!< Bit position for AIPS_PACRP_TP4. +#define BM_AIPS_PACRP_TP4 (0x00001000U) //!< Bit mask for AIPS_PACRP_TP4. +#define BS_AIPS_PACRP_TP4 (1U) //!< Bit field size in bits for AIPS_PACRP_TP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP4 field. +#define BR_AIPS_PACRP_TP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP4. +#define BF_AIPS_PACRP_TP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP4), uint32_t) & BM_AIPS_PACRP_TP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP4 field to a new value. +#define BW_AIPS_PACRP_TP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP4[13] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP4 (13U) //!< Bit position for AIPS_PACRP_WP4. +#define BM_AIPS_PACRP_WP4 (0x00002000U) //!< Bit mask for AIPS_PACRP_WP4. +#define BS_AIPS_PACRP_WP4 (1U) //!< Bit field size in bits for AIPS_PACRP_WP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP4 field. +#define BR_AIPS_PACRP_WP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP4. +#define BF_AIPS_PACRP_WP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP4), uint32_t) & BM_AIPS_PACRP_WP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP4 field to a new value. +#define BW_AIPS_PACRP_WP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP4[14] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP4 (14U) //!< Bit position for AIPS_PACRP_SP4. +#define BM_AIPS_PACRP_SP4 (0x00004000U) //!< Bit mask for AIPS_PACRP_SP4. +#define BS_AIPS_PACRP_SP4 (1U) //!< Bit field size in bits for AIPS_PACRP_SP4. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP4 field. +#define BR_AIPS_PACRP_SP4(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP4)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP4. +#define BF_AIPS_PACRP_SP4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP4), uint32_t) & BM_AIPS_PACRP_SP4) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP4 field to a new value. +#define BW_AIPS_PACRP_SP4(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP4) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP3[16] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP3 (16U) //!< Bit position for AIPS_PACRP_TP3. +#define BM_AIPS_PACRP_TP3 (0x00010000U) //!< Bit mask for AIPS_PACRP_TP3. +#define BS_AIPS_PACRP_TP3 (1U) //!< Bit field size in bits for AIPS_PACRP_TP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP3 field. +#define BR_AIPS_PACRP_TP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP3. +#define BF_AIPS_PACRP_TP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP3), uint32_t) & BM_AIPS_PACRP_TP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP3 field to a new value. +#define BW_AIPS_PACRP_TP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP3[17] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP3 (17U) //!< Bit position for AIPS_PACRP_WP3. +#define BM_AIPS_PACRP_WP3 (0x00020000U) //!< Bit mask for AIPS_PACRP_WP3. +#define BS_AIPS_PACRP_WP3 (1U) //!< Bit field size in bits for AIPS_PACRP_WP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP3 field. +#define BR_AIPS_PACRP_WP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP3. +#define BF_AIPS_PACRP_WP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP3), uint32_t) & BM_AIPS_PACRP_WP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP3 field to a new value. +#define BW_AIPS_PACRP_WP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP3[18] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP3 (18U) //!< Bit position for AIPS_PACRP_SP3. +#define BM_AIPS_PACRP_SP3 (0x00040000U) //!< Bit mask for AIPS_PACRP_SP3. +#define BS_AIPS_PACRP_SP3 (1U) //!< Bit field size in bits for AIPS_PACRP_SP3. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP3 field. +#define BR_AIPS_PACRP_SP3(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP3)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP3. +#define BF_AIPS_PACRP_SP3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP3), uint32_t) & BM_AIPS_PACRP_SP3) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP3 field to a new value. +#define BW_AIPS_PACRP_SP3(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP3) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP2[20] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP2 (20U) //!< Bit position for AIPS_PACRP_TP2. +#define BM_AIPS_PACRP_TP2 (0x00100000U) //!< Bit mask for AIPS_PACRP_TP2. +#define BS_AIPS_PACRP_TP2 (1U) //!< Bit field size in bits for AIPS_PACRP_TP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP2 field. +#define BR_AIPS_PACRP_TP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP2. +#define BF_AIPS_PACRP_TP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP2), uint32_t) & BM_AIPS_PACRP_TP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP2 field to a new value. +#define BW_AIPS_PACRP_TP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP2[21] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP2 (21U) //!< Bit position for AIPS_PACRP_WP2. +#define BM_AIPS_PACRP_WP2 (0x00200000U) //!< Bit mask for AIPS_PACRP_WP2. +#define BS_AIPS_PACRP_WP2 (1U) //!< Bit field size in bits for AIPS_PACRP_WP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP2 field. +#define BR_AIPS_PACRP_WP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP2. +#define BF_AIPS_PACRP_WP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP2), uint32_t) & BM_AIPS_PACRP_WP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP2 field to a new value. +#define BW_AIPS_PACRP_WP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP2[22] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attributeMPR x [MPL n ], and the MPR x [MPL n ] control bit for + * the master must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP2 (22U) //!< Bit position for AIPS_PACRP_SP2. +#define BM_AIPS_PACRP_SP2 (0x00400000U) //!< Bit mask for AIPS_PACRP_SP2. +#define BS_AIPS_PACRP_SP2 (1U) //!< Bit field size in bits for AIPS_PACRP_SP2. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP2 field. +#define BR_AIPS_PACRP_SP2(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP2)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP2. +#define BF_AIPS_PACRP_SP2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP2), uint32_t) & BM_AIPS_PACRP_SP2) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP2 field to a new value. +#define BW_AIPS_PACRP_SP2(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP2) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP1 (24U) //!< Bit position for AIPS_PACRP_TP1. +#define BM_AIPS_PACRP_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRP_TP1. +#define BS_AIPS_PACRP_TP1 (1U) //!< Bit field size in bits for AIPS_PACRP_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP1 field. +#define BR_AIPS_PACRP_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP1. +#define BF_AIPS_PACRP_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP1), uint32_t) & BM_AIPS_PACRP_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRP_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP1 (25U) //!< Bit position for AIPS_PACRP_WP1. +#define BM_AIPS_PACRP_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRP_WP1. +#define BS_AIPS_PACRP_WP1 (1U) //!< Bit field size in bits for AIPS_PACRP_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP1 field. +#define BR_AIPS_PACRP_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP1. +#define BF_AIPS_PACRP_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP1), uint32_t) & BM_AIPS_PACRP_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRP_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP1 (26U) //!< Bit position for AIPS_PACRP_SP1. +#define BM_AIPS_PACRP_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRP_SP1. +#define BS_AIPS_PACRP_SP1 (1U) //!< Bit field size in bits for AIPS_PACRP_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP1 field. +#define BR_AIPS_PACRP_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP1. +#define BF_AIPS_PACRP_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP1), uint32_t) & BM_AIPS_PACRP_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRP_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this bit is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRP_TP0 (28U) //!< Bit position for AIPS_PACRP_TP0. +#define BM_AIPS_PACRP_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRP_TP0. +#define BS_AIPS_PACRP_TP0 (1U) //!< Bit field size in bits for AIPS_PACRP_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_TP0 field. +#define BR_AIPS_PACRP_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_TP0. +#define BF_AIPS_PACRP_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_TP0), uint32_t) & BM_AIPS_PACRP_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRP_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRP_WP0 (29U) //!< Bit position for AIPS_PACRP_WP0. +#define BM_AIPS_PACRP_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRP_WP0. +#define BS_AIPS_PACRP_WP0 (1U) //!< Bit field size in bits for AIPS_PACRP_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_WP0 field. +#define BR_AIPS_PACRP_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_WP0. +#define BF_AIPS_PACRP_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_WP0), uint32_t) & BM_AIPS_PACRP_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRP_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRP, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRP_SP0 (30U) //!< Bit position for AIPS_PACRP_SP0. +#define BM_AIPS_PACRP_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRP_SP0. +#define BS_AIPS_PACRP_SP0 (1U) //!< Bit field size in bits for AIPS_PACRP_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRP_SP0 field. +#define BR_AIPS_PACRP_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRP_SP0. +#define BF_AIPS_PACRP_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRP_SP0), uint32_t) & BM_AIPS_PACRP_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRP_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRP_ADDR(x), BP_AIPS_PACRP_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_AIPS_PACRU - Peripheral Access Control Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_AIPS_PACRU - Peripheral Access Control Register (RW) + * + * Reset value: 0x00000000U + * + * PACRU defines the access levels for the two global spaces. + */ +typedef union _hw_aips_pacru +{ + uint32_t U; + struct _hw_aips_pacru_bitfields + { + uint32_t RESERVED0 : 24; //!< [23:0] + uint32_t TP1 : 1; //!< [24] Trusted Protect + uint32_t WP1 : 1; //!< [25] Write protect + uint32_t SP1 : 1; //!< [26] Supervisor Protect + uint32_t RESERVED1 : 1; //!< [27] + uint32_t TP0 : 1; //!< [28] Trusted Protect + uint32_t WP0 : 1; //!< [29] Write Protect + uint32_t SP0 : 1; //!< [30] Supervisor protect + uint32_t RESERVED2 : 1; //!< [31] + } B; +} hw_aips_pacru_t; +#endif + +/*! + * @name Constants and macros for entire AIPS_PACRU register + */ +//@{ +#define HW_AIPS_PACRU_ADDR(x) (REGS_AIPS_BASE(x) + 0x80U) + +#ifndef __LANGUAGE_ASM__ +#define HW_AIPS_PACRU(x) (*(__IO hw_aips_pacru_t *) HW_AIPS_PACRU_ADDR(x)) +#define HW_AIPS_PACRU_RD(x) (HW_AIPS_PACRU(x).U) +#define HW_AIPS_PACRU_WR(x, v) (HW_AIPS_PACRU(x).U = (v)) +#define HW_AIPS_PACRU_SET(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) | (v))) +#define HW_AIPS_PACRU_CLR(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) & ~(v))) +#define HW_AIPS_PACRU_TOG(x, v) (HW_AIPS_PACRU_WR(x, HW_AIPS_PACRU_RD(x) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual AIPS_PACRU bitfields + */ + +/*! + * @name Register AIPS_PACRU, field TP1[24] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRU_TP1 (24U) //!< Bit position for AIPS_PACRU_TP1. +#define BM_AIPS_PACRU_TP1 (0x01000000U) //!< Bit mask for AIPS_PACRU_TP1. +#define BS_AIPS_PACRU_TP1 (1U) //!< Bit field size in bits for AIPS_PACRU_TP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_TP1 field. +#define BR_AIPS_PACRU_TP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_TP1. +#define BF_AIPS_PACRU_TP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_TP1), uint32_t) & BM_AIPS_PACRU_TP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP1 field to a new value. +#define BW_AIPS_PACRU_TP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRU, field WP1[25] (RW) + * + * Determines whether the peripheral allows write accesss. When this bit is set + * and a write access is attempted, access terminates with an error response and + * no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRU_WP1 (25U) //!< Bit position for AIPS_PACRU_WP1. +#define BM_AIPS_PACRU_WP1 (0x02000000U) //!< Bit mask for AIPS_PACRU_WP1. +#define BS_AIPS_PACRU_WP1 (1U) //!< Bit field size in bits for AIPS_PACRU_WP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_WP1 field. +#define BR_AIPS_PACRU_WP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_WP1. +#define BF_AIPS_PACRU_WP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_WP1), uint32_t) & BM_AIPS_PACRU_WP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP1 field to a new value. +#define BW_AIPS_PACRU_WP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRU, field SP1[26] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * accesses. When this field is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control field for the master + * must be set. If not, access terminates with an error response and no + * peripheral access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRU_SP1 (26U) //!< Bit position for AIPS_PACRU_SP1. +#define BM_AIPS_PACRU_SP1 (0x04000000U) //!< Bit mask for AIPS_PACRU_SP1. +#define BS_AIPS_PACRU_SP1 (1U) //!< Bit field size in bits for AIPS_PACRU_SP1. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_SP1 field. +#define BR_AIPS_PACRU_SP1(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP1)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_SP1. +#define BF_AIPS_PACRU_SP1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_SP1), uint32_t) & BM_AIPS_PACRU_SP1) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP1 field to a new value. +#define BW_AIPS_PACRU_SP1(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP1) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRU, field TP0[28] (RW) + * + * Determines whether the peripheral allows accesses from an untrusted master. + * When this field is set and an access is attempted by an untrusted master, the + * access terminates with an error response and no peripheral access initiates . + * + * Values: + * - 0 - Accesses from an untrusted master are allowed. + * - 1 - Accesses from an untrusted master are not allowed. + */ +//@{ +#define BP_AIPS_PACRU_TP0 (28U) //!< Bit position for AIPS_PACRU_TP0. +#define BM_AIPS_PACRU_TP0 (0x10000000U) //!< Bit mask for AIPS_PACRU_TP0. +#define BS_AIPS_PACRU_TP0 (1U) //!< Bit field size in bits for AIPS_PACRU_TP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_TP0 field. +#define BR_AIPS_PACRU_TP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_TP0. +#define BF_AIPS_PACRU_TP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_TP0), uint32_t) & BM_AIPS_PACRU_TP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TP0 field to a new value. +#define BW_AIPS_PACRU_TP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_TP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRU, field WP0[29] (RW) + * + * Determines whether the peripheral allows write accessses. When this field is + * set and a write access is attempted, access terminates with an error response + * and no peripheral access initiates . + * + * Values: + * - 0 - This peripheral allows write accesses. + * - 1 - This peripheral is write protected. + */ +//@{ +#define BP_AIPS_PACRU_WP0 (29U) //!< Bit position for AIPS_PACRU_WP0. +#define BM_AIPS_PACRU_WP0 (0x20000000U) //!< Bit mask for AIPS_PACRU_WP0. +#define BS_AIPS_PACRU_WP0 (1U) //!< Bit field size in bits for AIPS_PACRU_WP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_WP0 field. +#define BR_AIPS_PACRU_WP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_WP0. +#define BF_AIPS_PACRU_WP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_WP0), uint32_t) & BM_AIPS_PACRU_WP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the WP0 field to a new value. +#define BW_AIPS_PACRU_WP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_WP0) = (v)) +#endif +//@} + +/*! + * @name Register AIPS_PACRU, field SP0[30] (RW) + * + * Determines whether the peripheral requires supervisor privilege level for + * access. When this bit is set, the master privilege level must indicate the + * supervisor access attribute, and the MPR x [MPL n ] control bit for the master must + * be set. If not, access terminates with an error response and no peripheral + * access initiates . + * + * Values: + * - 0 - This peripheral does not require supervisor privilege level for + * accesses. + * - 1 - This peripheral requires supervisor privilege level for accesses. + */ +//@{ +#define BP_AIPS_PACRU_SP0 (30U) //!< Bit position for AIPS_PACRU_SP0. +#define BM_AIPS_PACRU_SP0 (0x40000000U) //!< Bit mask for AIPS_PACRU_SP0. +#define BS_AIPS_PACRU_SP0 (1U) //!< Bit field size in bits for AIPS_PACRU_SP0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the AIPS_PACRU_SP0 field. +#define BR_AIPS_PACRU_SP0(x) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP0)) +#endif + +//! @brief Format value for bitfield AIPS_PACRU_SP0. +#define BF_AIPS_PACRU_SP0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_AIPS_PACRU_SP0), uint32_t) & BM_AIPS_PACRU_SP0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SP0 field to a new value. +#define BW_AIPS_PACRU_SP0(x, v) (BITBAND_ACCESS32(HW_AIPS_PACRU_ADDR(x), BP_AIPS_PACRU_SP0) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// hw_aips_t - module struct +//------------------------------------------------------------------------------------------- +/*! + * @brief All AIPS module registers. + */ +#ifndef __LANGUAGE_ASM__ +#pragma pack(1) +typedef struct _hw_aips +{ + __IO hw_aips_mpra_t MPRA; //!< [0x0] Master Privilege Register A + uint8_t _reserved0[28]; + __IO hw_aips_pacra_t PACRA; //!< [0x20] Peripheral Access Control Register + __IO hw_aips_pacrb_t PACRB; //!< [0x24] Peripheral Access Control Register + __IO hw_aips_pacrc_t PACRC; //!< [0x28] Peripheral Access Control Register + __IO hw_aips_pacrd_t PACRD; //!< [0x2C] Peripheral Access Control Register + uint8_t _reserved1[16]; + __IO hw_aips_pacre_t PACRE; //!< [0x40] Peripheral Access Control Register + __IO hw_aips_pacrf_t PACRF; //!< [0x44] Peripheral Access Control Register + __IO hw_aips_pacrg_t PACRG; //!< [0x48] Peripheral Access Control Register + __IO hw_aips_pacrh_t PACRH; //!< [0x4C] Peripheral Access Control Register + __IO hw_aips_pacri_t PACRI; //!< [0x50] Peripheral Access Control Register + __IO hw_aips_pacrj_t PACRJ; //!< [0x54] Peripheral Access Control Register + __IO hw_aips_pacrk_t PACRK; //!< [0x58] Peripheral Access Control Register + __IO hw_aips_pacrl_t PACRL; //!< [0x5C] Peripheral Access Control Register + __IO hw_aips_pacrm_t PACRM; //!< [0x60] Peripheral Access Control Register + __IO hw_aips_pacrn_t PACRN; //!< [0x64] Peripheral Access Control Register + __IO hw_aips_pacro_t PACRO; //!< [0x68] Peripheral Access Control Register + __IO hw_aips_pacrp_t PACRP; //!< [0x6C] Peripheral Access Control Register + uint8_t _reserved2[16]; + __IO hw_aips_pacru_t PACRU; //!< [0x80] Peripheral Access Control Register +} hw_aips_t; +#pragma pack() + +//! @brief Macro to access all AIPS registers. +//! @param x AIPS instance number. +//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, +//! use the '&' operator, like <code>&HW_AIPS(0)</code>. +#define HW_AIPS(x) (*(hw_aips_t *) REGS_AIPS_BASE(x)) +#endif + +#endif // __HW_AIPS_REGISTERS_H__ +// v22/130726/0.9 +// EOF diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_cmp.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_cmp.h new file mode 100644 index 0000000000..27d65af091 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_cmp.h @@ -0,0 +1,940 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_CMP_REGISTERS_H__ +#define __HW_CMP_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 CMP + * + * High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX) + * + * Registers defined in this header file: + * - HW_CMP_CR0 - CMP Control Register 0 + * - HW_CMP_CR1 - CMP Control Register 1 + * - HW_CMP_FPR - CMP Filter Period Register + * - HW_CMP_SCR - CMP Status and Control Register + * - HW_CMP_DACCR - DAC Control Register + * - HW_CMP_MUXCR - MUX Control Register + * + * - hw_cmp_t - Struct containing all module registers. + */ + +#define HW_CMP_INSTANCE_COUNT (2U) /*!< Number of instances of the CMP module. */ +#define HW_CMP0 (0U) /*!< Instance number for CMP0. */ +#define HW_CMP1 (1U) /*!< Instance number for CMP1. */ + +/******************************************************************************* + * HW_CMP_CR0 - CMP Control Register 0 + ******************************************************************************/ + +/*! + * @brief HW_CMP_CR0 - CMP Control Register 0 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_cr0 +{ + uint8_t U; + struct _hw_cmp_cr0_bitfields + { + uint8_t HYSTCTR : 2; /*!< [1:0] Comparator hard block hysteresis + * control */ + uint8_t RESERVED0 : 2; /*!< [3:2] */ + uint8_t FILTER_CNT : 3; /*!< [6:4] Filter Sample Count */ + uint8_t RESERVED1 : 1; /*!< [7] */ + } B; +} hw_cmp_cr0_t; + +/*! + * @name Constants and macros for entire CMP_CR0 register + */ +/*@{*/ +#define HW_CMP_CR0_ADDR(x) ((x) + 0x0U) + +#define HW_CMP_CR0(x) (*(__IO hw_cmp_cr0_t *) HW_CMP_CR0_ADDR(x)) +#define HW_CMP_CR0_RD(x) (HW_CMP_CR0(x).U) +#define HW_CMP_CR0_WR(x, v) (HW_CMP_CR0(x).U = (v)) +#define HW_CMP_CR0_SET(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) | (v))) +#define HW_CMP_CR0_CLR(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) & ~(v))) +#define HW_CMP_CR0_TOG(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_CR0 bitfields + */ + +/*! + * @name Register CMP_CR0, field HYSTCTR[1:0] (RW) + * + * Defines the programmable hysteresis level. The hysteresis values associated + * with each level are device-specific. See the Data Sheet of the device for the + * exact values. + * + * Values: + * - 00 - Level 0 + * - 01 - Level 1 + * - 10 - Level 2 + * - 11 - Level 3 + */ +/*@{*/ +#define BP_CMP_CR0_HYSTCTR (0U) /*!< Bit position for CMP_CR0_HYSTCTR. */ +#define BM_CMP_CR0_HYSTCTR (0x03U) /*!< Bit mask for CMP_CR0_HYSTCTR. */ +#define BS_CMP_CR0_HYSTCTR (2U) /*!< Bit field size in bits for CMP_CR0_HYSTCTR. */ + +/*! @brief Read current value of the CMP_CR0_HYSTCTR field. */ +#define BR_CMP_CR0_HYSTCTR(x) (HW_CMP_CR0(x).B.HYSTCTR) + +/*! @brief Format value for bitfield CMP_CR0_HYSTCTR. */ +#define BF_CMP_CR0_HYSTCTR(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_HYSTCTR) & BM_CMP_CR0_HYSTCTR) + +/*! @brief Set the HYSTCTR field to a new value. */ +#define BW_CMP_CR0_HYSTCTR(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_HYSTCTR) | BF_CMP_CR0_HYSTCTR(v))) +/*@}*/ + +/*! + * @name Register CMP_CR0, field FILTER_CNT[6:4] (RW) + * + * Represents the number of consecutive samples that must agree prior to the + * comparator ouput filter accepting a new output state. For information regarding + * filter programming and latency, see the Functional descriptionThe CMP module + * can be used to compare two analog input voltages applied to INP and INM. . + * + * Values: + * - 000 - Filter is disabled. If SE = 1, then COUT is a logic 0. This is not a + * legal state, and is not recommended. If SE = 0, COUT = COUTA. + * - 001 - One sample must agree. The comparator output is simply sampled. + * - 010 - 2 consecutive samples must agree. + * - 011 - 3 consecutive samples must agree. + * - 100 - 4 consecutive samples must agree. + * - 101 - 5 consecutive samples must agree. + * - 110 - 6 consecutive samples must agree. + * - 111 - 7 consecutive samples must agree. + */ +/*@{*/ +#define BP_CMP_CR0_FILTER_CNT (4U) /*!< Bit position for CMP_CR0_FILTER_CNT. */ +#define BM_CMP_CR0_FILTER_CNT (0x70U) /*!< Bit mask for CMP_CR0_FILTER_CNT. */ +#define BS_CMP_CR0_FILTER_CNT (3U) /*!< Bit field size in bits for CMP_CR0_FILTER_CNT. */ + +/*! @brief Read current value of the CMP_CR0_FILTER_CNT field. */ +#define BR_CMP_CR0_FILTER_CNT(x) (HW_CMP_CR0(x).B.FILTER_CNT) + +/*! @brief Format value for bitfield CMP_CR0_FILTER_CNT. */ +#define BF_CMP_CR0_FILTER_CNT(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_FILTER_CNT) & BM_CMP_CR0_FILTER_CNT) + +/*! @brief Set the FILTER_CNT field to a new value. */ +#define BW_CMP_CR0_FILTER_CNT(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_FILTER_CNT) | BF_CMP_CR0_FILTER_CNT(v))) +/*@}*/ + +/******************************************************************************* + * HW_CMP_CR1 - CMP Control Register 1 + ******************************************************************************/ + +/*! + * @brief HW_CMP_CR1 - CMP Control Register 1 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_cr1 +{ + uint8_t U; + struct _hw_cmp_cr1_bitfields + { + uint8_t EN : 1; /*!< [0] Comparator Module Enable */ + uint8_t OPE : 1; /*!< [1] Comparator Output Pin Enable */ + uint8_t COS : 1; /*!< [2] Comparator Output Select */ + uint8_t INV : 1; /*!< [3] Comparator INVERT */ + uint8_t PMODE : 1; /*!< [4] Power Mode Select */ + uint8_t TRIGM : 1; /*!< [5] Trigger Mode Enable */ + uint8_t WE : 1; /*!< [6] Windowing Enable */ + uint8_t SE : 1; /*!< [7] Sample Enable */ + } B; +} hw_cmp_cr1_t; + +/*! + * @name Constants and macros for entire CMP_CR1 register + */ +/*@{*/ +#define HW_CMP_CR1_ADDR(x) ((x) + 0x1U) + +#define HW_CMP_CR1(x) (*(__IO hw_cmp_cr1_t *) HW_CMP_CR1_ADDR(x)) +#define HW_CMP_CR1_RD(x) (HW_CMP_CR1(x).U) +#define HW_CMP_CR1_WR(x, v) (HW_CMP_CR1(x).U = (v)) +#define HW_CMP_CR1_SET(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) | (v))) +#define HW_CMP_CR1_CLR(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) & ~(v))) +#define HW_CMP_CR1_TOG(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_CR1 bitfields + */ + +/*! + * @name Register CMP_CR1, field EN[0] (RW) + * + * Enables the Analog Comparator module. When the module is not enabled, it + * remains in the off state, and consumes no power. When the user selects the same + * input from analog mux to the positive and negative port, the comparator is + * disabled automatically. + * + * Values: + * - 0 - Analog Comparator is disabled. + * - 1 - Analog Comparator is enabled. + */ +/*@{*/ +#define BP_CMP_CR1_EN (0U) /*!< Bit position for CMP_CR1_EN. */ +#define BM_CMP_CR1_EN (0x01U) /*!< Bit mask for CMP_CR1_EN. */ +#define BS_CMP_CR1_EN (1U) /*!< Bit field size in bits for CMP_CR1_EN. */ + +/*! @brief Read current value of the CMP_CR1_EN field. */ +#define BR_CMP_CR1_EN(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN)) + +/*! @brief Format value for bitfield CMP_CR1_EN. */ +#define BF_CMP_CR1_EN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_EN) & BM_CMP_CR1_EN) + +/*! @brief Set the EN field to a new value. */ +#define BW_CMP_CR1_EN(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field OPE[1] (RW) + * + * Values: + * - 0 - CMPO is not available on the associated CMPO output pin. If the + * comparator does not own the pin, this field has no effect. + * - 1 - CMPO is available on the associated CMPO output pin. The comparator + * output (CMPO) is driven out on the associated CMPO output pin if the + * comparator owns the pin. If the comparator does not own the field, this bit has no + * effect. + */ +/*@{*/ +#define BP_CMP_CR1_OPE (1U) /*!< Bit position for CMP_CR1_OPE. */ +#define BM_CMP_CR1_OPE (0x02U) /*!< Bit mask for CMP_CR1_OPE. */ +#define BS_CMP_CR1_OPE (1U) /*!< Bit field size in bits for CMP_CR1_OPE. */ + +/*! @brief Read current value of the CMP_CR1_OPE field. */ +#define BR_CMP_CR1_OPE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE)) + +/*! @brief Format value for bitfield CMP_CR1_OPE. */ +#define BF_CMP_CR1_OPE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_OPE) & BM_CMP_CR1_OPE) + +/*! @brief Set the OPE field to a new value. */ +#define BW_CMP_CR1_OPE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field COS[2] (RW) + * + * Values: + * - 0 - Set the filtered comparator output (CMPO) to equal COUT. + * - 1 - Set the unfiltered comparator output (CMPO) to equal COUTA. + */ +/*@{*/ +#define BP_CMP_CR1_COS (2U) /*!< Bit position for CMP_CR1_COS. */ +#define BM_CMP_CR1_COS (0x04U) /*!< Bit mask for CMP_CR1_COS. */ +#define BS_CMP_CR1_COS (1U) /*!< Bit field size in bits for CMP_CR1_COS. */ + +/*! @brief Read current value of the CMP_CR1_COS field. */ +#define BR_CMP_CR1_COS(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS)) + +/*! @brief Format value for bitfield CMP_CR1_COS. */ +#define BF_CMP_CR1_COS(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_COS) & BM_CMP_CR1_COS) + +/*! @brief Set the COS field to a new value. */ +#define BW_CMP_CR1_COS(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field INV[3] (RW) + * + * Allows selection of the polarity of the analog comparator function. It is + * also driven to the COUT output, on both the device pin and as SCR[COUT], when + * OPE=0. + * + * Values: + * - 0 - Does not invert the comparator output. + * - 1 - Inverts the comparator output. + */ +/*@{*/ +#define BP_CMP_CR1_INV (3U) /*!< Bit position for CMP_CR1_INV. */ +#define BM_CMP_CR1_INV (0x08U) /*!< Bit mask for CMP_CR1_INV. */ +#define BS_CMP_CR1_INV (1U) /*!< Bit field size in bits for CMP_CR1_INV. */ + +/*! @brief Read current value of the CMP_CR1_INV field. */ +#define BR_CMP_CR1_INV(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV)) + +/*! @brief Format value for bitfield CMP_CR1_INV. */ +#define BF_CMP_CR1_INV(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_INV) & BM_CMP_CR1_INV) + +/*! @brief Set the INV field to a new value. */ +#define BW_CMP_CR1_INV(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field PMODE[4] (RW) + * + * See the electrical specifications table in the device Data Sheet for details. + * + * Values: + * - 0 - Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower + * output propagation delay and lower current consumption. + * - 1 - High-Speed (HS) Comparison mode selected. In this mode, CMP has faster + * output propagation delay and higher current consumption. + */ +/*@{*/ +#define BP_CMP_CR1_PMODE (4U) /*!< Bit position for CMP_CR1_PMODE. */ +#define BM_CMP_CR1_PMODE (0x10U) /*!< Bit mask for CMP_CR1_PMODE. */ +#define BS_CMP_CR1_PMODE (1U) /*!< Bit field size in bits for CMP_CR1_PMODE. */ + +/*! @brief Read current value of the CMP_CR1_PMODE field. */ +#define BR_CMP_CR1_PMODE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE)) + +/*! @brief Format value for bitfield CMP_CR1_PMODE. */ +#define BF_CMP_CR1_PMODE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_PMODE) & BM_CMP_CR1_PMODE) + +/*! @brief Set the PMODE field to a new value. */ +#define BW_CMP_CR1_PMODE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field TRIGM[5] (RW) + * + * CMP and DAC are configured to CMP Trigger mode when CMP_CR1[TRIGM] is set to + * 1. In addition, the CMP should be enabled. If the DAC is to be used as a + * reference to the CMP, it should also be enabled. CMP Trigger mode depends on an + * external timer resource to periodically enable the CMP and 6-bit DAC in order to + * generate a triggered compare. Upon setting TRIGM, the CMP and DAC are placed + * in a standby state until an external timer resource trigger is received. See + * the chip configuration for details about the external timer resource. + * + * Values: + * - 0 - Trigger mode is disabled. + * - 1 - Trigger mode is enabled. + */ +/*@{*/ +#define BP_CMP_CR1_TRIGM (5U) /*!< Bit position for CMP_CR1_TRIGM. */ +#define BM_CMP_CR1_TRIGM (0x20U) /*!< Bit mask for CMP_CR1_TRIGM. */ +#define BS_CMP_CR1_TRIGM (1U) /*!< Bit field size in bits for CMP_CR1_TRIGM. */ + +/*! @brief Read current value of the CMP_CR1_TRIGM field. */ +#define BR_CMP_CR1_TRIGM(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_TRIGM)) + +/*! @brief Format value for bitfield CMP_CR1_TRIGM. */ +#define BF_CMP_CR1_TRIGM(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_TRIGM) & BM_CMP_CR1_TRIGM) + +/*! @brief Set the TRIGM field to a new value. */ +#define BW_CMP_CR1_TRIGM(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_TRIGM) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field WE[6] (RW) + * + * At any given time, either SE or WE can be set. If a write to this register + * attempts to set both, then SE is set and WE is cleared. However, avoid writing + * 1s to both field locations because this "11" case is reserved and may change in + * future implementations. + * + * Values: + * - 0 - Windowing mode is not selected. + * - 1 - Windowing mode is selected. + */ +/*@{*/ +#define BP_CMP_CR1_WE (6U) /*!< Bit position for CMP_CR1_WE. */ +#define BM_CMP_CR1_WE (0x40U) /*!< Bit mask for CMP_CR1_WE. */ +#define BS_CMP_CR1_WE (1U) /*!< Bit field size in bits for CMP_CR1_WE. */ + +/*! @brief Read current value of the CMP_CR1_WE field. */ +#define BR_CMP_CR1_WE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE)) + +/*! @brief Format value for bitfield CMP_CR1_WE. */ +#define BF_CMP_CR1_WE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_WE) & BM_CMP_CR1_WE) + +/*! @brief Set the WE field to a new value. */ +#define BW_CMP_CR1_WE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE) = (v)) +/*@}*/ + +/*! + * @name Register CMP_CR1, field SE[7] (RW) + * + * At any given time, either SE or WE can be set. If a write to this register + * attempts to set both, then SE is set and WE is cleared. However, avoid writing + * 1s to both field locations because this "11" case is reserved and may change in + * future implementations. + * + * Values: + * - 0 - Sampling mode is not selected. + * - 1 - Sampling mode is selected. + */ +/*@{*/ +#define BP_CMP_CR1_SE (7U) /*!< Bit position for CMP_CR1_SE. */ +#define BM_CMP_CR1_SE (0x80U) /*!< Bit mask for CMP_CR1_SE. */ +#define BS_CMP_CR1_SE (1U) /*!< Bit field size in bits for CMP_CR1_SE. */ + +/*! @brief Read current value of the CMP_CR1_SE field. */ +#define BR_CMP_CR1_SE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE)) + +/*! @brief Format value for bitfield CMP_CR1_SE. */ +#define BF_CMP_CR1_SE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_SE) & BM_CMP_CR1_SE) + +/*! @brief Set the SE field to a new value. */ +#define BW_CMP_CR1_SE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_CMP_FPR - CMP Filter Period Register + ******************************************************************************/ + +/*! + * @brief HW_CMP_FPR - CMP Filter Period Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_fpr +{ + uint8_t U; + struct _hw_cmp_fpr_bitfields + { + uint8_t FILT_PER : 8; /*!< [7:0] Filter Sample Period */ + } B; +} hw_cmp_fpr_t; + +/*! + * @name Constants and macros for entire CMP_FPR register + */ +/*@{*/ +#define HW_CMP_FPR_ADDR(x) ((x) + 0x2U) + +#define HW_CMP_FPR(x) (*(__IO hw_cmp_fpr_t *) HW_CMP_FPR_ADDR(x)) +#define HW_CMP_FPR_RD(x) (HW_CMP_FPR(x).U) +#define HW_CMP_FPR_WR(x, v) (HW_CMP_FPR(x).U = (v)) +#define HW_CMP_FPR_SET(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) | (v))) +#define HW_CMP_FPR_CLR(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) & ~(v))) +#define HW_CMP_FPR_TOG(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_FPR bitfields + */ + +/*! + * @name Register CMP_FPR, field FILT_PER[7:0] (RW) + * + * Specifies the sampling period, in bus clock cycles, of the comparator output + * filter, when CR1[SE]=0. Setting FILT_PER to 0x0 disables the filter. Filter + * programming and latency details appear in the Functional descriptionThe CMP + * module can be used to compare two analog input voltages applied to INP and INM. . + * This field has no effect when CR1[SE]=1. In that case, the external SAMPLE + * signal is used to determine the sampling period. + */ +/*@{*/ +#define BP_CMP_FPR_FILT_PER (0U) /*!< Bit position for CMP_FPR_FILT_PER. */ +#define BM_CMP_FPR_FILT_PER (0xFFU) /*!< Bit mask for CMP_FPR_FILT_PER. */ +#define BS_CMP_FPR_FILT_PER (8U) /*!< Bit field size in bits for CMP_FPR_FILT_PER. */ + +/*! @brief Read current value of the CMP_FPR_FILT_PER field. */ +#define BR_CMP_FPR_FILT_PER(x) (HW_CMP_FPR(x).U) + +/*! @brief Format value for bitfield CMP_FPR_FILT_PER. */ +#define BF_CMP_FPR_FILT_PER(v) ((uint8_t)((uint8_t)(v) << BP_CMP_FPR_FILT_PER) & BM_CMP_FPR_FILT_PER) + +/*! @brief Set the FILT_PER field to a new value. */ +#define BW_CMP_FPR_FILT_PER(x, v) (HW_CMP_FPR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_CMP_SCR - CMP Status and Control Register + ******************************************************************************/ + +/*! + * @brief HW_CMP_SCR - CMP Status and Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_scr +{ + uint8_t U; + struct _hw_cmp_scr_bitfields + { + uint8_t COUT : 1; /*!< [0] Analog Comparator Output */ + uint8_t CFF : 1; /*!< [1] Analog Comparator Flag Falling */ + uint8_t CFR : 1; /*!< [2] Analog Comparator Flag Rising */ + uint8_t IEF : 1; /*!< [3] Comparator Interrupt Enable Falling */ + uint8_t IER : 1; /*!< [4] Comparator Interrupt Enable Rising */ + uint8_t RESERVED0 : 1; /*!< [5] */ + uint8_t DMAEN : 1; /*!< [6] DMA Enable Control */ + uint8_t RESERVED1 : 1; /*!< [7] */ + } B; +} hw_cmp_scr_t; + +/*! + * @name Constants and macros for entire CMP_SCR register + */ +/*@{*/ +#define HW_CMP_SCR_ADDR(x) ((x) + 0x3U) + +#define HW_CMP_SCR(x) (*(__IO hw_cmp_scr_t *) HW_CMP_SCR_ADDR(x)) +#define HW_CMP_SCR_RD(x) (HW_CMP_SCR(x).U) +#define HW_CMP_SCR_WR(x, v) (HW_CMP_SCR(x).U = (v)) +#define HW_CMP_SCR_SET(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) | (v))) +#define HW_CMP_SCR_CLR(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) & ~(v))) +#define HW_CMP_SCR_TOG(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_SCR bitfields + */ + +/*! + * @name Register CMP_SCR, field COUT[0] (RO) + * + * Returns the current value of the Analog Comparator output, when read. The + * field is reset to 0 and will read as CR1[INV] when the Analog Comparator module + * is disabled, that is, when CR1[EN] = 0. Writes to this field are ignored. + */ +/*@{*/ +#define BP_CMP_SCR_COUT (0U) /*!< Bit position for CMP_SCR_COUT. */ +#define BM_CMP_SCR_COUT (0x01U) /*!< Bit mask for CMP_SCR_COUT. */ +#define BS_CMP_SCR_COUT (1U) /*!< Bit field size in bits for CMP_SCR_COUT. */ + +/*! @brief Read current value of the CMP_SCR_COUT field. */ +#define BR_CMP_SCR_COUT(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_COUT)) +/*@}*/ + +/*! + * @name Register CMP_SCR, field CFF[1] (W1C) + * + * Detects a falling-edge on COUT, when set, during normal operation. CFF is + * cleared by writing 1 to it. During Stop modes, CFF is level sensitive . + * + * Values: + * - 0 - Falling-edge on COUT has not been detected. + * - 1 - Falling-edge on COUT has occurred. + */ +/*@{*/ +#define BP_CMP_SCR_CFF (1U) /*!< Bit position for CMP_SCR_CFF. */ +#define BM_CMP_SCR_CFF (0x02U) /*!< Bit mask for CMP_SCR_CFF. */ +#define BS_CMP_SCR_CFF (1U) /*!< Bit field size in bits for CMP_SCR_CFF. */ + +/*! @brief Read current value of the CMP_SCR_CFF field. */ +#define BR_CMP_SCR_CFF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF)) + +/*! @brief Format value for bitfield CMP_SCR_CFF. */ +#define BF_CMP_SCR_CFF(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFF) & BM_CMP_SCR_CFF) + +/*! @brief Set the CFF field to a new value. */ +#define BW_CMP_SCR_CFF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF) = (v)) +/*@}*/ + +/*! + * @name Register CMP_SCR, field CFR[2] (W1C) + * + * Detects a rising-edge on COUT, when set, during normal operation. CFR is + * cleared by writing 1 to it. During Stop modes, CFR is level sensitive . + * + * Values: + * - 0 - Rising-edge on COUT has not been detected. + * - 1 - Rising-edge on COUT has occurred. + */ +/*@{*/ +#define BP_CMP_SCR_CFR (2U) /*!< Bit position for CMP_SCR_CFR. */ +#define BM_CMP_SCR_CFR (0x04U) /*!< Bit mask for CMP_SCR_CFR. */ +#define BS_CMP_SCR_CFR (1U) /*!< Bit field size in bits for CMP_SCR_CFR. */ + +/*! @brief Read current value of the CMP_SCR_CFR field. */ +#define BR_CMP_SCR_CFR(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR)) + +/*! @brief Format value for bitfield CMP_SCR_CFR. */ +#define BF_CMP_SCR_CFR(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFR) & BM_CMP_SCR_CFR) + +/*! @brief Set the CFR field to a new value. */ +#define BW_CMP_SCR_CFR(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR) = (v)) +/*@}*/ + +/*! + * @name Register CMP_SCR, field IEF[3] (RW) + * + * Enables the CFF interrupt from the CMP. When this field is set, an interrupt + * will be asserted when CFF is set. + * + * Values: + * - 0 - Interrupt is disabled. + * - 1 - Interrupt is enabled. + */ +/*@{*/ +#define BP_CMP_SCR_IEF (3U) /*!< Bit position for CMP_SCR_IEF. */ +#define BM_CMP_SCR_IEF (0x08U) /*!< Bit mask for CMP_SCR_IEF. */ +#define BS_CMP_SCR_IEF (1U) /*!< Bit field size in bits for CMP_SCR_IEF. */ + +/*! @brief Read current value of the CMP_SCR_IEF field. */ +#define BR_CMP_SCR_IEF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF)) + +/*! @brief Format value for bitfield CMP_SCR_IEF. */ +#define BF_CMP_SCR_IEF(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IEF) & BM_CMP_SCR_IEF) + +/*! @brief Set the IEF field to a new value. */ +#define BW_CMP_SCR_IEF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF) = (v)) +/*@}*/ + +/*! + * @name Register CMP_SCR, field IER[4] (RW) + * + * Enables the CFR interrupt from the CMP. When this field is set, an interrupt + * will be asserted when CFR is set. + * + * Values: + * - 0 - Interrupt is disabled. + * - 1 - Interrupt is enabled. + */ +/*@{*/ +#define BP_CMP_SCR_IER (4U) /*!< Bit position for CMP_SCR_IER. */ +#define BM_CMP_SCR_IER (0x10U) /*!< Bit mask for CMP_SCR_IER. */ +#define BS_CMP_SCR_IER (1U) /*!< Bit field size in bits for CMP_SCR_IER. */ + +/*! @brief Read current value of the CMP_SCR_IER field. */ +#define BR_CMP_SCR_IER(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER)) + +/*! @brief Format value for bitfield CMP_SCR_IER. */ +#define BF_CMP_SCR_IER(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IER) & BM_CMP_SCR_IER) + +/*! @brief Set the IER field to a new value. */ +#define BW_CMP_SCR_IER(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER) = (v)) +/*@}*/ + +/*! + * @name Register CMP_SCR, field DMAEN[6] (RW) + * + * Enables the DMA transfer triggered from the CMP module. When this field is + * set, a DMA request is asserted when CFR or CFF is set. + * + * Values: + * - 0 - DMA is disabled. + * - 1 - DMA is enabled. + */ +/*@{*/ +#define BP_CMP_SCR_DMAEN (6U) /*!< Bit position for CMP_SCR_DMAEN. */ +#define BM_CMP_SCR_DMAEN (0x40U) /*!< Bit mask for CMP_SCR_DMAEN. */ +#define BS_CMP_SCR_DMAEN (1U) /*!< Bit field size in bits for CMP_SCR_DMAEN. */ + +/*! @brief Read current value of the CMP_SCR_DMAEN field. */ +#define BR_CMP_SCR_DMAEN(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN)) + +/*! @brief Format value for bitfield CMP_SCR_DMAEN. */ +#define BF_CMP_SCR_DMAEN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_DMAEN) & BM_CMP_SCR_DMAEN) + +/*! @brief Set the DMAEN field to a new value. */ +#define BW_CMP_SCR_DMAEN(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_CMP_DACCR - DAC Control Register + ******************************************************************************/ + +/*! + * @brief HW_CMP_DACCR - DAC Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_daccr +{ + uint8_t U; + struct _hw_cmp_daccr_bitfields + { + uint8_t VOSEL : 6; /*!< [5:0] DAC Output Voltage Select */ + uint8_t VRSEL : 1; /*!< [6] Supply Voltage Reference Source Select */ + uint8_t DACEN : 1; /*!< [7] DAC Enable */ + } B; +} hw_cmp_daccr_t; + +/*! + * @name Constants and macros for entire CMP_DACCR register + */ +/*@{*/ +#define HW_CMP_DACCR_ADDR(x) ((x) + 0x4U) + +#define HW_CMP_DACCR(x) (*(__IO hw_cmp_daccr_t *) HW_CMP_DACCR_ADDR(x)) +#define HW_CMP_DACCR_RD(x) (HW_CMP_DACCR(x).U) +#define HW_CMP_DACCR_WR(x, v) (HW_CMP_DACCR(x).U = (v)) +#define HW_CMP_DACCR_SET(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) | (v))) +#define HW_CMP_DACCR_CLR(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) & ~(v))) +#define HW_CMP_DACCR_TOG(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_DACCR bitfields + */ + +/*! + * @name Register CMP_DACCR, field VOSEL[5:0] (RW) + * + * Selects an output voltage from one of 64 distinct levels. DACO = (V in /64) * + * (VOSEL[5:0] + 1) , so the DACO range is from V in /64 to V in . + */ +/*@{*/ +#define BP_CMP_DACCR_VOSEL (0U) /*!< Bit position for CMP_DACCR_VOSEL. */ +#define BM_CMP_DACCR_VOSEL (0x3FU) /*!< Bit mask for CMP_DACCR_VOSEL. */ +#define BS_CMP_DACCR_VOSEL (6U) /*!< Bit field size in bits for CMP_DACCR_VOSEL. */ + +/*! @brief Read current value of the CMP_DACCR_VOSEL field. */ +#define BR_CMP_DACCR_VOSEL(x) (HW_CMP_DACCR(x).B.VOSEL) + +/*! @brief Format value for bitfield CMP_DACCR_VOSEL. */ +#define BF_CMP_DACCR_VOSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VOSEL) & BM_CMP_DACCR_VOSEL) + +/*! @brief Set the VOSEL field to a new value. */ +#define BW_CMP_DACCR_VOSEL(x, v) (HW_CMP_DACCR_WR(x, (HW_CMP_DACCR_RD(x) & ~BM_CMP_DACCR_VOSEL) | BF_CMP_DACCR_VOSEL(v))) +/*@}*/ + +/*! + * @name Register CMP_DACCR, field VRSEL[6] (RW) + * + * Values: + * - 0 - V is selected as resistor ladder network supply reference V. in1 in + * - 1 - V is selected as resistor ladder network supply reference V. in2 in + */ +/*@{*/ +#define BP_CMP_DACCR_VRSEL (6U) /*!< Bit position for CMP_DACCR_VRSEL. */ +#define BM_CMP_DACCR_VRSEL (0x40U) /*!< Bit mask for CMP_DACCR_VRSEL. */ +#define BS_CMP_DACCR_VRSEL (1U) /*!< Bit field size in bits for CMP_DACCR_VRSEL. */ + +/*! @brief Read current value of the CMP_DACCR_VRSEL field. */ +#define BR_CMP_DACCR_VRSEL(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL)) + +/*! @brief Format value for bitfield CMP_DACCR_VRSEL. */ +#define BF_CMP_DACCR_VRSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VRSEL) & BM_CMP_DACCR_VRSEL) + +/*! @brief Set the VRSEL field to a new value. */ +#define BW_CMP_DACCR_VRSEL(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL) = (v)) +/*@}*/ + +/*! + * @name Register CMP_DACCR, field DACEN[7] (RW) + * + * Enables the DAC. When the DAC is disabled, it is powered down to conserve + * power. + * + * Values: + * - 0 - DAC is disabled. + * - 1 - DAC is enabled. + */ +/*@{*/ +#define BP_CMP_DACCR_DACEN (7U) /*!< Bit position for CMP_DACCR_DACEN. */ +#define BM_CMP_DACCR_DACEN (0x80U) /*!< Bit mask for CMP_DACCR_DACEN. */ +#define BS_CMP_DACCR_DACEN (1U) /*!< Bit field size in bits for CMP_DACCR_DACEN. */ + +/*! @brief Read current value of the CMP_DACCR_DACEN field. */ +#define BR_CMP_DACCR_DACEN(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN)) + +/*! @brief Format value for bitfield CMP_DACCR_DACEN. */ +#define BF_CMP_DACCR_DACEN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_DACEN) & BM_CMP_DACCR_DACEN) + +/*! @brief Set the DACEN field to a new value. */ +#define BW_CMP_DACCR_DACEN(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_CMP_MUXCR - MUX Control Register + ******************************************************************************/ + +/*! + * @brief HW_CMP_MUXCR - MUX Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_cmp_muxcr +{ + uint8_t U; + struct _hw_cmp_muxcr_bitfields + { + uint8_t MSEL : 3; /*!< [2:0] Minus Input Mux Control */ + uint8_t PSEL : 3; /*!< [5:3] Plus Input Mux Control */ + uint8_t RESERVED0 : 2; /*!< [7:6] Bit can be programmed to zero only + * . */ + } B; +} hw_cmp_muxcr_t; + +/*! + * @name Constants and macros for entire CMP_MUXCR register + */ +/*@{*/ +#define HW_CMP_MUXCR_ADDR(x) ((x) + 0x5U) + +#define HW_CMP_MUXCR(x) (*(__IO hw_cmp_muxcr_t *) HW_CMP_MUXCR_ADDR(x)) +#define HW_CMP_MUXCR_RD(x) (HW_CMP_MUXCR(x).U) +#define HW_CMP_MUXCR_WR(x, v) (HW_CMP_MUXCR(x).U = (v)) +#define HW_CMP_MUXCR_SET(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) | (v))) +#define HW_CMP_MUXCR_CLR(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) & ~(v))) +#define HW_CMP_MUXCR_TOG(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CMP_MUXCR bitfields + */ + +/*! + * @name Register CMP_MUXCR, field MSEL[2:0] (RW) + * + * Determines which input is selected for the minus input of the comparator. For + * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate + * operation selects the same input for both muxes, the comparator automatically + * shuts down to prevent itself from becoming a noise generator. + * + * Values: + * - 000 - IN0 + * - 001 - IN1 + * - 010 - IN2 + * - 011 - IN3 + * - 100 - IN4 + * - 101 - IN5 + * - 110 - IN6 + * - 111 - IN7 + */ +/*@{*/ +#define BP_CMP_MUXCR_MSEL (0U) /*!< Bit position for CMP_MUXCR_MSEL. */ +#define BM_CMP_MUXCR_MSEL (0x07U) /*!< Bit mask for CMP_MUXCR_MSEL. */ +#define BS_CMP_MUXCR_MSEL (3U) /*!< Bit field size in bits for CMP_MUXCR_MSEL. */ + +/*! @brief Read current value of the CMP_MUXCR_MSEL field. */ +#define BR_CMP_MUXCR_MSEL(x) (HW_CMP_MUXCR(x).B.MSEL) + +/*! @brief Format value for bitfield CMP_MUXCR_MSEL. */ +#define BF_CMP_MUXCR_MSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_MSEL) & BM_CMP_MUXCR_MSEL) + +/*! @brief Set the MSEL field to a new value. */ +#define BW_CMP_MUXCR_MSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_MSEL) | BF_CMP_MUXCR_MSEL(v))) +/*@}*/ + +/*! + * @name Register CMP_MUXCR, field PSEL[5:3] (RW) + * + * Determines which input is selected for the plus input of the comparator. For + * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate + * operation selects the same input for both muxes, the comparator automatically + * shuts down to prevent itself from becoming a noise generator. + * + * Values: + * - 000 - IN0 + * - 001 - IN1 + * - 010 - IN2 + * - 011 - IN3 + * - 100 - IN4 + * - 101 - IN5 + * - 110 - IN6 + * - 111 - IN7 + */ +/*@{*/ +#define BP_CMP_MUXCR_PSEL (3U) /*!< Bit position for CMP_MUXCR_PSEL. */ +#define BM_CMP_MUXCR_PSEL (0x38U) /*!< Bit mask for CMP_MUXCR_PSEL. */ +#define BS_CMP_MUXCR_PSEL (3U) /*!< Bit field size in bits for CMP_MUXCR_PSEL. */ + +/*! @brief Read current value of the CMP_MUXCR_PSEL field. */ +#define BR_CMP_MUXCR_PSEL(x) (HW_CMP_MUXCR(x).B.PSEL) + +/*! @brief Format value for bitfield CMP_MUXCR_PSEL. */ +#define BF_CMP_MUXCR_PSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_PSEL) & BM_CMP_MUXCR_PSEL) + +/*! @brief Set the PSEL field to a new value. */ +#define BW_CMP_MUXCR_PSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_PSEL) | BF_CMP_MUXCR_PSEL(v))) +/*@}*/ + +/******************************************************************************* + * hw_cmp_t - module struct + ******************************************************************************/ +/*! + * @brief All CMP module registers. + */ +#pragma pack(1) +typedef struct _hw_cmp +{ + __IO hw_cmp_cr0_t CR0; /*!< [0x0] CMP Control Register 0 */ + __IO hw_cmp_cr1_t CR1; /*!< [0x1] CMP Control Register 1 */ + __IO hw_cmp_fpr_t FPR; /*!< [0x2] CMP Filter Period Register */ + __IO hw_cmp_scr_t SCR; /*!< [0x3] CMP Status and Control Register */ + __IO hw_cmp_daccr_t DACCR; /*!< [0x4] DAC Control Register */ + __IO hw_cmp_muxcr_t MUXCR; /*!< [0x5] MUX Control Register */ +} hw_cmp_t; +#pragma pack() + +/*! @brief Macro to access all CMP registers. */ +/*! @param x CMP module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_CMP(CMP0_BASE)</code>. */ +#define HW_CMP(x) (*(hw_cmp_t *)(x)) + +#endif /* __HW_CMP_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_crc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_crc.h new file mode 100644 index 0000000000..00f2a723ab --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_crc.h @@ -0,0 +1,1406 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_CRC_REGISTERS_H__ +#define __HW_CRC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 CRC + * + * Cyclic Redundancy Check + * + * Registers defined in this header file: + * - HW_CRC_DATAL - CRC_DATAL register. + * - HW_CRC_DATAH - CRC_DATAH register. + * - HW_CRC_DATALL - CRC_DATALL register. + * - HW_CRC_DATALU - CRC_DATALU register. + * - HW_CRC_DATAHL - CRC_DATAHL register. + * - HW_CRC_DATAHU - CRC_DATAHU register. + * - HW_CRC_DATA - CRC Data register + * - HW_CRC_GPOLY - CRC Polynomial register + * - HW_CRC_GPOLYL - CRC_GPOLYL register. + * - HW_CRC_GPOLYH - CRC_GPOLYH register. + * - HW_CRC_GPOLYLL - CRC_GPOLYLL register. + * - HW_CRC_GPOLYLU - CRC_GPOLYLU register. + * - HW_CRC_GPOLYHL - CRC_GPOLYHL register. + * - HW_CRC_GPOLYHU - CRC_GPOLYHU register. + * - HW_CRC_CTRL - CRC Control register + * - HW_CRC_CTRLHU - CRC_CTRLHU register. + * + * - hw_crc_t - Struct containing all module registers. + */ + +#define HW_CRC_INSTANCE_COUNT (1U) /*!< Number of instances of the CRC module. */ + +/******************************************************************************* + * HW_CRC_DATAL - CRC_DATAL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATAL - CRC_DATAL register. (RW) + * + * Reset value: 0xFFFFU + */ +typedef union _hw_crc_datal +{ + uint16_t U; + struct _hw_crc_datal_bitfields + { + uint16_t DATAL : 16; /*!< [15:0] DATAL stores the lower 16 bits of + * the 16/32 bit CRC */ + } B; +} hw_crc_datal_t; + +/*! + * @name Constants and macros for entire CRC_DATAL register + */ +/*@{*/ +#define HW_CRC_DATAL_ADDR(x) ((x) + 0x0U) + +#define HW_CRC_DATAL(x) (*(__IO hw_crc_datal_t *) HW_CRC_DATAL_ADDR(x)) +#define HW_CRC_DATAL_RD(x) (HW_CRC_DATAL(x).U) +#define HW_CRC_DATAL_WR(x, v) (HW_CRC_DATAL(x).U = (v)) +#define HW_CRC_DATAL_SET(x, v) (HW_CRC_DATAL_WR(x, HW_CRC_DATAL_RD(x) | (v))) +#define HW_CRC_DATAL_CLR(x, v) (HW_CRC_DATAL_WR(x, HW_CRC_DATAL_RD(x) & ~(v))) +#define HW_CRC_DATAL_TOG(x, v) (HW_CRC_DATAL_WR(x, HW_CRC_DATAL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATAL bitfields + */ + +/*! + * @name Register CRC_DATAL, field DATAL[15:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATAL_DATAL (0U) /*!< Bit position for CRC_DATAL_DATAL. */ +#define BM_CRC_DATAL_DATAL (0xFFFFU) /*!< Bit mask for CRC_DATAL_DATAL. */ +#define BS_CRC_DATAL_DATAL (16U) /*!< Bit field size in bits for CRC_DATAL_DATAL. */ + +/*! @brief Read current value of the CRC_DATAL_DATAL field. */ +#define BR_CRC_DATAL_DATAL(x) (HW_CRC_DATAL(x).U) + +/*! @brief Format value for bitfield CRC_DATAL_DATAL. */ +#define BF_CRC_DATAL_DATAL(v) ((uint16_t)((uint16_t)(v) << BP_CRC_DATAL_DATAL) & BM_CRC_DATAL_DATAL) + +/*! @brief Set the DATAL field to a new value. */ +#define BW_CRC_DATAL_DATAL(x, v) (HW_CRC_DATAL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATAH - CRC_DATAH register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATAH - CRC_DATAH register. (RW) + * + * Reset value: 0xFFFFU + */ +typedef union _hw_crc_datah +{ + uint16_t U; + struct _hw_crc_datah_bitfields + { + uint16_t DATAH : 16; /*!< [15:0] DATAH stores the high 16 bits of the + * 16/32 bit CRC */ + } B; +} hw_crc_datah_t; + +/*! + * @name Constants and macros for entire CRC_DATAH register + */ +/*@{*/ +#define HW_CRC_DATAH_ADDR(x) ((x) + 0x2U) + +#define HW_CRC_DATAH(x) (*(__IO hw_crc_datah_t *) HW_CRC_DATAH_ADDR(x)) +#define HW_CRC_DATAH_RD(x) (HW_CRC_DATAH(x).U) +#define HW_CRC_DATAH_WR(x, v) (HW_CRC_DATAH(x).U = (v)) +#define HW_CRC_DATAH_SET(x, v) (HW_CRC_DATAH_WR(x, HW_CRC_DATAH_RD(x) | (v))) +#define HW_CRC_DATAH_CLR(x, v) (HW_CRC_DATAH_WR(x, HW_CRC_DATAH_RD(x) & ~(v))) +#define HW_CRC_DATAH_TOG(x, v) (HW_CRC_DATAH_WR(x, HW_CRC_DATAH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATAH bitfields + */ + +/*! + * @name Register CRC_DATAH, field DATAH[15:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATAH_DATAH (0U) /*!< Bit position for CRC_DATAH_DATAH. */ +#define BM_CRC_DATAH_DATAH (0xFFFFU) /*!< Bit mask for CRC_DATAH_DATAH. */ +#define BS_CRC_DATAH_DATAH (16U) /*!< Bit field size in bits for CRC_DATAH_DATAH. */ + +/*! @brief Read current value of the CRC_DATAH_DATAH field. */ +#define BR_CRC_DATAH_DATAH(x) (HW_CRC_DATAH(x).U) + +/*! @brief Format value for bitfield CRC_DATAH_DATAH. */ +#define BF_CRC_DATAH_DATAH(v) ((uint16_t)((uint16_t)(v) << BP_CRC_DATAH_DATAH) & BM_CRC_DATAH_DATAH) + +/*! @brief Set the DATAH field to a new value. */ +#define BW_CRC_DATAH_DATAH(x, v) (HW_CRC_DATAH_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATALL - CRC_DATALL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATALL - CRC_DATALL register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_datall +{ + uint8_t U; + struct _hw_crc_datall_bitfields + { + uint8_t DATALL : 8; /*!< [7:0] CRCLL stores the first 8 bits of the + * 32 bit DATA */ + } B; +} hw_crc_datall_t; + +/*! + * @name Constants and macros for entire CRC_DATALL register + */ +/*@{*/ +#define HW_CRC_DATALL_ADDR(x) ((x) + 0x0U) + +#define HW_CRC_DATALL(x) (*(__IO hw_crc_datall_t *) HW_CRC_DATALL_ADDR(x)) +#define HW_CRC_DATALL_RD(x) (HW_CRC_DATALL(x).U) +#define HW_CRC_DATALL_WR(x, v) (HW_CRC_DATALL(x).U = (v)) +#define HW_CRC_DATALL_SET(x, v) (HW_CRC_DATALL_WR(x, HW_CRC_DATALL_RD(x) | (v))) +#define HW_CRC_DATALL_CLR(x, v) (HW_CRC_DATALL_WR(x, HW_CRC_DATALL_RD(x) & ~(v))) +#define HW_CRC_DATALL_TOG(x, v) (HW_CRC_DATALL_WR(x, HW_CRC_DATALL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATALL bitfields + */ + +/*! + * @name Register CRC_DATALL, field DATALL[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATALL_DATALL (0U) /*!< Bit position for CRC_DATALL_DATALL. */ +#define BM_CRC_DATALL_DATALL (0xFFU) /*!< Bit mask for CRC_DATALL_DATALL. */ +#define BS_CRC_DATALL_DATALL (8U) /*!< Bit field size in bits for CRC_DATALL_DATALL. */ + +/*! @brief Read current value of the CRC_DATALL_DATALL field. */ +#define BR_CRC_DATALL_DATALL(x) (HW_CRC_DATALL(x).U) + +/*! @brief Format value for bitfield CRC_DATALL_DATALL. */ +#define BF_CRC_DATALL_DATALL(v) ((uint8_t)((uint8_t)(v) << BP_CRC_DATALL_DATALL) & BM_CRC_DATALL_DATALL) + +/*! @brief Set the DATALL field to a new value. */ +#define BW_CRC_DATALL_DATALL(x, v) (HW_CRC_DATALL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATALU - CRC_DATALU register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATALU - CRC_DATALU register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_datalu +{ + uint8_t U; + struct _hw_crc_datalu_bitfields + { + uint8_t DATALU : 8; /*!< [7:0] DATALL stores the second 8 bits of the + * 32 bit CRC */ + } B; +} hw_crc_datalu_t; + +/*! + * @name Constants and macros for entire CRC_DATALU register + */ +/*@{*/ +#define HW_CRC_DATALU_ADDR(x) ((x) + 0x1U) + +#define HW_CRC_DATALU(x) (*(__IO hw_crc_datalu_t *) HW_CRC_DATALU_ADDR(x)) +#define HW_CRC_DATALU_RD(x) (HW_CRC_DATALU(x).U) +#define HW_CRC_DATALU_WR(x, v) (HW_CRC_DATALU(x).U = (v)) +#define HW_CRC_DATALU_SET(x, v) (HW_CRC_DATALU_WR(x, HW_CRC_DATALU_RD(x) | (v))) +#define HW_CRC_DATALU_CLR(x, v) (HW_CRC_DATALU_WR(x, HW_CRC_DATALU_RD(x) & ~(v))) +#define HW_CRC_DATALU_TOG(x, v) (HW_CRC_DATALU_WR(x, HW_CRC_DATALU_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATALU bitfields + */ + +/*! + * @name Register CRC_DATALU, field DATALU[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATALU_DATALU (0U) /*!< Bit position for CRC_DATALU_DATALU. */ +#define BM_CRC_DATALU_DATALU (0xFFU) /*!< Bit mask for CRC_DATALU_DATALU. */ +#define BS_CRC_DATALU_DATALU (8U) /*!< Bit field size in bits for CRC_DATALU_DATALU. */ + +/*! @brief Read current value of the CRC_DATALU_DATALU field. */ +#define BR_CRC_DATALU_DATALU(x) (HW_CRC_DATALU(x).U) + +/*! @brief Format value for bitfield CRC_DATALU_DATALU. */ +#define BF_CRC_DATALU_DATALU(v) ((uint8_t)((uint8_t)(v) << BP_CRC_DATALU_DATALU) & BM_CRC_DATALU_DATALU) + +/*! @brief Set the DATALU field to a new value. */ +#define BW_CRC_DATALU_DATALU(x, v) (HW_CRC_DATALU_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATAHL - CRC_DATAHL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATAHL - CRC_DATAHL register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_datahl +{ + uint8_t U; + struct _hw_crc_datahl_bitfields + { + uint8_t DATAHL : 8; /*!< [7:0] DATAHL stores the third 8 bits of the + * 32 bit CRC */ + } B; +} hw_crc_datahl_t; + +/*! + * @name Constants and macros for entire CRC_DATAHL register + */ +/*@{*/ +#define HW_CRC_DATAHL_ADDR(x) ((x) + 0x2U) + +#define HW_CRC_DATAHL(x) (*(__IO hw_crc_datahl_t *) HW_CRC_DATAHL_ADDR(x)) +#define HW_CRC_DATAHL_RD(x) (HW_CRC_DATAHL(x).U) +#define HW_CRC_DATAHL_WR(x, v) (HW_CRC_DATAHL(x).U = (v)) +#define HW_CRC_DATAHL_SET(x, v) (HW_CRC_DATAHL_WR(x, HW_CRC_DATAHL_RD(x) | (v))) +#define HW_CRC_DATAHL_CLR(x, v) (HW_CRC_DATAHL_WR(x, HW_CRC_DATAHL_RD(x) & ~(v))) +#define HW_CRC_DATAHL_TOG(x, v) (HW_CRC_DATAHL_WR(x, HW_CRC_DATAHL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATAHL bitfields + */ + +/*! + * @name Register CRC_DATAHL, field DATAHL[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATAHL_DATAHL (0U) /*!< Bit position for CRC_DATAHL_DATAHL. */ +#define BM_CRC_DATAHL_DATAHL (0xFFU) /*!< Bit mask for CRC_DATAHL_DATAHL. */ +#define BS_CRC_DATAHL_DATAHL (8U) /*!< Bit field size in bits for CRC_DATAHL_DATAHL. */ + +/*! @brief Read current value of the CRC_DATAHL_DATAHL field. */ +#define BR_CRC_DATAHL_DATAHL(x) (HW_CRC_DATAHL(x).U) + +/*! @brief Format value for bitfield CRC_DATAHL_DATAHL. */ +#define BF_CRC_DATAHL_DATAHL(v) ((uint8_t)((uint8_t)(v) << BP_CRC_DATAHL_DATAHL) & BM_CRC_DATAHL_DATAHL) + +/*! @brief Set the DATAHL field to a new value. */ +#define BW_CRC_DATAHL_DATAHL(x, v) (HW_CRC_DATAHL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATAHU - CRC_DATAHU register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATAHU - CRC_DATAHU register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_datahu +{ + uint8_t U; + struct _hw_crc_datahu_bitfields + { + uint8_t DATAHU : 8; /*!< [7:0] DATAHU stores the fourth 8 bits of the + * 32 bit CRC */ + } B; +} hw_crc_datahu_t; + +/*! + * @name Constants and macros for entire CRC_DATAHU register + */ +/*@{*/ +#define HW_CRC_DATAHU_ADDR(x) ((x) + 0x3U) + +#define HW_CRC_DATAHU(x) (*(__IO hw_crc_datahu_t *) HW_CRC_DATAHU_ADDR(x)) +#define HW_CRC_DATAHU_RD(x) (HW_CRC_DATAHU(x).U) +#define HW_CRC_DATAHU_WR(x, v) (HW_CRC_DATAHU(x).U = (v)) +#define HW_CRC_DATAHU_SET(x, v) (HW_CRC_DATAHU_WR(x, HW_CRC_DATAHU_RD(x) | (v))) +#define HW_CRC_DATAHU_CLR(x, v) (HW_CRC_DATAHU_WR(x, HW_CRC_DATAHU_RD(x) & ~(v))) +#define HW_CRC_DATAHU_TOG(x, v) (HW_CRC_DATAHU_WR(x, HW_CRC_DATAHU_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATAHU bitfields + */ + +/*! + * @name Register CRC_DATAHU, field DATAHU[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_DATAHU_DATAHU (0U) /*!< Bit position for CRC_DATAHU_DATAHU. */ +#define BM_CRC_DATAHU_DATAHU (0xFFU) /*!< Bit mask for CRC_DATAHU_DATAHU. */ +#define BS_CRC_DATAHU_DATAHU (8U) /*!< Bit field size in bits for CRC_DATAHU_DATAHU. */ + +/*! @brief Read current value of the CRC_DATAHU_DATAHU field. */ +#define BR_CRC_DATAHU_DATAHU(x) (HW_CRC_DATAHU(x).U) + +/*! @brief Format value for bitfield CRC_DATAHU_DATAHU. */ +#define BF_CRC_DATAHU_DATAHU(v) ((uint8_t)((uint8_t)(v) << BP_CRC_DATAHU_DATAHU) & BM_CRC_DATAHU_DATAHU) + +/*! @brief Set the DATAHU field to a new value. */ +#define BW_CRC_DATAHU_DATAHU(x, v) (HW_CRC_DATAHU_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_DATA - CRC Data register + ******************************************************************************/ + +/*! + * @brief HW_CRC_DATA - CRC Data register (RW) + * + * Reset value: 0xFFFFFFFFU + * + * The CRC Data register contains the value of the seed, data, and checksum. + * When CTRL[WAS] is set, any write to the data register is regarded as the seed + * value. When CTRL[WAS] is cleared, any write to the data register is regarded as + * data for general CRC computation. In 16-bit CRC mode, the HU and HL fields are + * not used for programming the seed value, and reads of these fields return an + * indeterminate value. In 32-bit CRC mode, all fields are used for programming + * the seed value. When programming data values, the values can be written 8 bits, + * 16 bits, or 32 bits at a time, provided all bytes are contiguous; with MSB of + * data value written first. After all data values are written, the CRC result + * can be read from this data register. In 16-bit CRC mode, the CRC result is + * available in the LU and LL fields. In 32-bit CRC mode, all fields contain the + * result. Reads of this register at any time return the intermediate CRC value, + * provided the CRC module is configured. + */ +typedef union _hw_crc_data +{ + uint32_t U; + struct _hw_crc_data_bitfields + { + uint32_t LL : 8; /*!< [7:0] CRC Low Lower Byte */ + uint32_t LU : 8; /*!< [15:8] CRC Low Upper Byte */ + uint32_t HL : 8; /*!< [23:16] CRC High Lower Byte */ + uint32_t HU : 8; /*!< [31:24] CRC High Upper Byte */ + } B; +} hw_crc_data_t; + +/*! + * @name Constants and macros for entire CRC_DATA register + */ +/*@{*/ +#define HW_CRC_DATA_ADDR(x) ((x) + 0x0U) + +#define HW_CRC_DATA(x) (*(__IO hw_crc_data_t *) HW_CRC_DATA_ADDR(x)) +#define HW_CRC_DATA_RD(x) (HW_CRC_DATA(x).U) +#define HW_CRC_DATA_WR(x, v) (HW_CRC_DATA(x).U = (v)) +#define HW_CRC_DATA_SET(x, v) (HW_CRC_DATA_WR(x, HW_CRC_DATA_RD(x) | (v))) +#define HW_CRC_DATA_CLR(x, v) (HW_CRC_DATA_WR(x, HW_CRC_DATA_RD(x) & ~(v))) +#define HW_CRC_DATA_TOG(x, v) (HW_CRC_DATA_WR(x, HW_CRC_DATA_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_DATA bitfields + */ + +/*! + * @name Register CRC_DATA, field LL[7:0] (RW) + * + * When CTRL[WAS] is 1, values written to this field are part of the seed value. + * When CTRL[WAS] is 0, data written to this field is used for CRC checksum + * generation. + */ +/*@{*/ +#define BP_CRC_DATA_LL (0U) /*!< Bit position for CRC_DATA_LL. */ +#define BM_CRC_DATA_LL (0x000000FFU) /*!< Bit mask for CRC_DATA_LL. */ +#define BS_CRC_DATA_LL (8U) /*!< Bit field size in bits for CRC_DATA_LL. */ + +/*! @brief Read current value of the CRC_DATA_LL field. */ +#define BR_CRC_DATA_LL(x) (HW_CRC_DATA(x).B.LL) + +/*! @brief Format value for bitfield CRC_DATA_LL. */ +#define BF_CRC_DATA_LL(v) ((uint32_t)((uint32_t)(v) << BP_CRC_DATA_LL) & BM_CRC_DATA_LL) + +/*! @brief Set the LL field to a new value. */ +#define BW_CRC_DATA_LL(x, v) (HW_CRC_DATA_WR(x, (HW_CRC_DATA_RD(x) & ~BM_CRC_DATA_LL) | BF_CRC_DATA_LL(v))) +/*@}*/ + +/*! + * @name Register CRC_DATA, field LU[15:8] (RW) + * + * When CTRL[WAS] is 1, values written to this field are part of the seed value. + * When CTRL[WAS] is 0, data written to this field is used for CRC checksum + * generation. + */ +/*@{*/ +#define BP_CRC_DATA_LU (8U) /*!< Bit position for CRC_DATA_LU. */ +#define BM_CRC_DATA_LU (0x0000FF00U) /*!< Bit mask for CRC_DATA_LU. */ +#define BS_CRC_DATA_LU (8U) /*!< Bit field size in bits for CRC_DATA_LU. */ + +/*! @brief Read current value of the CRC_DATA_LU field. */ +#define BR_CRC_DATA_LU(x) (HW_CRC_DATA(x).B.LU) + +/*! @brief Format value for bitfield CRC_DATA_LU. */ +#define BF_CRC_DATA_LU(v) ((uint32_t)((uint32_t)(v) << BP_CRC_DATA_LU) & BM_CRC_DATA_LU) + +/*! @brief Set the LU field to a new value. */ +#define BW_CRC_DATA_LU(x, v) (HW_CRC_DATA_WR(x, (HW_CRC_DATA_RD(x) & ~BM_CRC_DATA_LU) | BF_CRC_DATA_LU(v))) +/*@}*/ + +/*! + * @name Register CRC_DATA, field HL[23:16] (RW) + * + * In 16-bit CRC mode (CTRL[TCRC] is 0), this field is not used for programming + * a seed value. In 32-bit CRC mode (CTRL[TCRC] is 1), values written to this + * field are part of the seed value when CTRL[WAS] is 1. When CTRL[WAS] is 0, data + * written to this field is used for CRC checksum generation in both 16-bit and + * 32-bit CRC modes. + */ +/*@{*/ +#define BP_CRC_DATA_HL (16U) /*!< Bit position for CRC_DATA_HL. */ +#define BM_CRC_DATA_HL (0x00FF0000U) /*!< Bit mask for CRC_DATA_HL. */ +#define BS_CRC_DATA_HL (8U) /*!< Bit field size in bits for CRC_DATA_HL. */ + +/*! @brief Read current value of the CRC_DATA_HL field. */ +#define BR_CRC_DATA_HL(x) (HW_CRC_DATA(x).B.HL) + +/*! @brief Format value for bitfield CRC_DATA_HL. */ +#define BF_CRC_DATA_HL(v) ((uint32_t)((uint32_t)(v) << BP_CRC_DATA_HL) & BM_CRC_DATA_HL) + +/*! @brief Set the HL field to a new value. */ +#define BW_CRC_DATA_HL(x, v) (HW_CRC_DATA_WR(x, (HW_CRC_DATA_RD(x) & ~BM_CRC_DATA_HL) | BF_CRC_DATA_HL(v))) +/*@}*/ + +/*! + * @name Register CRC_DATA, field HU[31:24] (RW) + * + * In 16-bit CRC mode (CTRL[TCRC] is 0), this field is not used for programming + * a seed value. In 32-bit CRC mode (CTRL[TCRC] is 1), values written to this + * field are part of the seed value when CTRL[WAS] is 1. When CTRL[WAS] is 0, data + * written to this field is used for CRC checksum generation in both 16-bit and + * 32-bit CRC modes. + */ +/*@{*/ +#define BP_CRC_DATA_HU (24U) /*!< Bit position for CRC_DATA_HU. */ +#define BM_CRC_DATA_HU (0xFF000000U) /*!< Bit mask for CRC_DATA_HU. */ +#define BS_CRC_DATA_HU (8U) /*!< Bit field size in bits for CRC_DATA_HU. */ + +/*! @brief Read current value of the CRC_DATA_HU field. */ +#define BR_CRC_DATA_HU(x) (HW_CRC_DATA(x).B.HU) + +/*! @brief Format value for bitfield CRC_DATA_HU. */ +#define BF_CRC_DATA_HU(v) ((uint32_t)((uint32_t)(v) << BP_CRC_DATA_HU) & BM_CRC_DATA_HU) + +/*! @brief Set the HU field to a new value. */ +#define BW_CRC_DATA_HU(x, v) (HW_CRC_DATA_WR(x, (HW_CRC_DATA_RD(x) & ~BM_CRC_DATA_HU) | BF_CRC_DATA_HU(v))) +/*@}*/ + +/******************************************************************************* + * HW_CRC_GPOLY - CRC Polynomial register + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLY - CRC Polynomial register (RW) + * + * Reset value: 0x00001021U + * + * This register contains the value of the polynomial for the CRC calculation. + * The HIGH field contains the upper 16 bits of the CRC polynomial, which are used + * only in 32-bit CRC mode. Writes to the HIGH field are ignored in 16-bit CRC + * mode. The LOW field contains the lower 16 bits of the CRC polynomial, which are + * used in both 16- and 32-bit CRC modes. + */ +typedef union _hw_crc_gpoly +{ + uint32_t U; + struct _hw_crc_gpoly_bitfields + { + uint32_t LOW : 16; /*!< [15:0] Low Polynominal Half-word */ + uint32_t HIGH : 16; /*!< [31:16] High Polynominal Half-word */ + } B; +} hw_crc_gpoly_t; + +/*! + * @name Constants and macros for entire CRC_GPOLY register + */ +/*@{*/ +#define HW_CRC_GPOLY_ADDR(x) ((x) + 0x4U) + +#define HW_CRC_GPOLY(x) (*(__IO hw_crc_gpoly_t *) HW_CRC_GPOLY_ADDR(x)) +#define HW_CRC_GPOLY_RD(x) (HW_CRC_GPOLY(x).U) +#define HW_CRC_GPOLY_WR(x, v) (HW_CRC_GPOLY(x).U = (v)) +#define HW_CRC_GPOLY_SET(x, v) (HW_CRC_GPOLY_WR(x, HW_CRC_GPOLY_RD(x) | (v))) +#define HW_CRC_GPOLY_CLR(x, v) (HW_CRC_GPOLY_WR(x, HW_CRC_GPOLY_RD(x) & ~(v))) +#define HW_CRC_GPOLY_TOG(x, v) (HW_CRC_GPOLY_WR(x, HW_CRC_GPOLY_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLY bitfields + */ + +/*! + * @name Register CRC_GPOLY, field LOW[15:0] (RW) + * + * Writable and readable in both 32-bit and 16-bit CRC modes. + */ +/*@{*/ +#define BP_CRC_GPOLY_LOW (0U) /*!< Bit position for CRC_GPOLY_LOW. */ +#define BM_CRC_GPOLY_LOW (0x0000FFFFU) /*!< Bit mask for CRC_GPOLY_LOW. */ +#define BS_CRC_GPOLY_LOW (16U) /*!< Bit field size in bits for CRC_GPOLY_LOW. */ + +/*! @brief Read current value of the CRC_GPOLY_LOW field. */ +#define BR_CRC_GPOLY_LOW(x) (HW_CRC_GPOLY(x).B.LOW) + +/*! @brief Format value for bitfield CRC_GPOLY_LOW. */ +#define BF_CRC_GPOLY_LOW(v) ((uint32_t)((uint32_t)(v) << BP_CRC_GPOLY_LOW) & BM_CRC_GPOLY_LOW) + +/*! @brief Set the LOW field to a new value. */ +#define BW_CRC_GPOLY_LOW(x, v) (HW_CRC_GPOLY_WR(x, (HW_CRC_GPOLY_RD(x) & ~BM_CRC_GPOLY_LOW) | BF_CRC_GPOLY_LOW(v))) +/*@}*/ + +/*! + * @name Register CRC_GPOLY, field HIGH[31:16] (RW) + * + * Writable and readable in 32-bit CRC mode (CTRL[TCRC] is 1). This field is not + * writable in 16-bit CRC mode (CTRL[TCRC] is 0). + */ +/*@{*/ +#define BP_CRC_GPOLY_HIGH (16U) /*!< Bit position for CRC_GPOLY_HIGH. */ +#define BM_CRC_GPOLY_HIGH (0xFFFF0000U) /*!< Bit mask for CRC_GPOLY_HIGH. */ +#define BS_CRC_GPOLY_HIGH (16U) /*!< Bit field size in bits for CRC_GPOLY_HIGH. */ + +/*! @brief Read current value of the CRC_GPOLY_HIGH field. */ +#define BR_CRC_GPOLY_HIGH(x) (HW_CRC_GPOLY(x).B.HIGH) + +/*! @brief Format value for bitfield CRC_GPOLY_HIGH. */ +#define BF_CRC_GPOLY_HIGH(v) ((uint32_t)((uint32_t)(v) << BP_CRC_GPOLY_HIGH) & BM_CRC_GPOLY_HIGH) + +/*! @brief Set the HIGH field to a new value. */ +#define BW_CRC_GPOLY_HIGH(x, v) (HW_CRC_GPOLY_WR(x, (HW_CRC_GPOLY_RD(x) & ~BM_CRC_GPOLY_HIGH) | BF_CRC_GPOLY_HIGH(v))) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYL - CRC_GPOLYL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYL - CRC_GPOLYL register. (RW) + * + * Reset value: 0xFFFFU + */ +typedef union _hw_crc_gpolyl +{ + uint16_t U; + struct _hw_crc_gpolyl_bitfields + { + uint16_t GPOLYL : 16; /*!< [15:0] POLYL stores the lower 16 bits of + * the 16/32 bit CRC polynomial value */ + } B; +} hw_crc_gpolyl_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYL register + */ +/*@{*/ +#define HW_CRC_GPOLYL_ADDR(x) ((x) + 0x4U) + +#define HW_CRC_GPOLYL(x) (*(__IO hw_crc_gpolyl_t *) HW_CRC_GPOLYL_ADDR(x)) +#define HW_CRC_GPOLYL_RD(x) (HW_CRC_GPOLYL(x).U) +#define HW_CRC_GPOLYL_WR(x, v) (HW_CRC_GPOLYL(x).U = (v)) +#define HW_CRC_GPOLYL_SET(x, v) (HW_CRC_GPOLYL_WR(x, HW_CRC_GPOLYL_RD(x) | (v))) +#define HW_CRC_GPOLYL_CLR(x, v) (HW_CRC_GPOLYL_WR(x, HW_CRC_GPOLYL_RD(x) & ~(v))) +#define HW_CRC_GPOLYL_TOG(x, v) (HW_CRC_GPOLYL_WR(x, HW_CRC_GPOLYL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYL bitfields + */ + +/*! + * @name Register CRC_GPOLYL, field GPOLYL[15:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYL_GPOLYL (0U) /*!< Bit position for CRC_GPOLYL_GPOLYL. */ +#define BM_CRC_GPOLYL_GPOLYL (0xFFFFU) /*!< Bit mask for CRC_GPOLYL_GPOLYL. */ +#define BS_CRC_GPOLYL_GPOLYL (16U) /*!< Bit field size in bits for CRC_GPOLYL_GPOLYL. */ + +/*! @brief Read current value of the CRC_GPOLYL_GPOLYL field. */ +#define BR_CRC_GPOLYL_GPOLYL(x) (HW_CRC_GPOLYL(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYL_GPOLYL. */ +#define BF_CRC_GPOLYL_GPOLYL(v) ((uint16_t)((uint16_t)(v) << BP_CRC_GPOLYL_GPOLYL) & BM_CRC_GPOLYL_GPOLYL) + +/*! @brief Set the GPOLYL field to a new value. */ +#define BW_CRC_GPOLYL_GPOLYL(x, v) (HW_CRC_GPOLYL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYH - CRC_GPOLYH register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYH - CRC_GPOLYH register. (RW) + * + * Reset value: 0xFFFFU + */ +typedef union _hw_crc_gpolyh +{ + uint16_t U; + struct _hw_crc_gpolyh_bitfields + { + uint16_t GPOLYH : 16; /*!< [15:0] POLYH stores the high 16 bits of + * the 16/32 bit CRC polynomial value */ + } B; +} hw_crc_gpolyh_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYH register + */ +/*@{*/ +#define HW_CRC_GPOLYH_ADDR(x) ((x) + 0x6U) + +#define HW_CRC_GPOLYH(x) (*(__IO hw_crc_gpolyh_t *) HW_CRC_GPOLYH_ADDR(x)) +#define HW_CRC_GPOLYH_RD(x) (HW_CRC_GPOLYH(x).U) +#define HW_CRC_GPOLYH_WR(x, v) (HW_CRC_GPOLYH(x).U = (v)) +#define HW_CRC_GPOLYH_SET(x, v) (HW_CRC_GPOLYH_WR(x, HW_CRC_GPOLYH_RD(x) | (v))) +#define HW_CRC_GPOLYH_CLR(x, v) (HW_CRC_GPOLYH_WR(x, HW_CRC_GPOLYH_RD(x) & ~(v))) +#define HW_CRC_GPOLYH_TOG(x, v) (HW_CRC_GPOLYH_WR(x, HW_CRC_GPOLYH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYH bitfields + */ + +/*! + * @name Register CRC_GPOLYH, field GPOLYH[15:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYH_GPOLYH (0U) /*!< Bit position for CRC_GPOLYH_GPOLYH. */ +#define BM_CRC_GPOLYH_GPOLYH (0xFFFFU) /*!< Bit mask for CRC_GPOLYH_GPOLYH. */ +#define BS_CRC_GPOLYH_GPOLYH (16U) /*!< Bit field size in bits for CRC_GPOLYH_GPOLYH. */ + +/*! @brief Read current value of the CRC_GPOLYH_GPOLYH field. */ +#define BR_CRC_GPOLYH_GPOLYH(x) (HW_CRC_GPOLYH(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYH_GPOLYH. */ +#define BF_CRC_GPOLYH_GPOLYH(v) ((uint16_t)((uint16_t)(v) << BP_CRC_GPOLYH_GPOLYH) & BM_CRC_GPOLYH_GPOLYH) + +/*! @brief Set the GPOLYH field to a new value. */ +#define BW_CRC_GPOLYH_GPOLYH(x, v) (HW_CRC_GPOLYH_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYLL - CRC_GPOLYLL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYLL - CRC_GPOLYLL register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_gpolyll +{ + uint8_t U; + struct _hw_crc_gpolyll_bitfields + { + uint8_t GPOLYLL : 8; /*!< [7:0] POLYLL stores the first 8 bits of the + * 32 bit CRC */ + } B; +} hw_crc_gpolyll_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYLL register + */ +/*@{*/ +#define HW_CRC_GPOLYLL_ADDR(x) ((x) + 0x4U) + +#define HW_CRC_GPOLYLL(x) (*(__IO hw_crc_gpolyll_t *) HW_CRC_GPOLYLL_ADDR(x)) +#define HW_CRC_GPOLYLL_RD(x) (HW_CRC_GPOLYLL(x).U) +#define HW_CRC_GPOLYLL_WR(x, v) (HW_CRC_GPOLYLL(x).U = (v)) +#define HW_CRC_GPOLYLL_SET(x, v) (HW_CRC_GPOLYLL_WR(x, HW_CRC_GPOLYLL_RD(x) | (v))) +#define HW_CRC_GPOLYLL_CLR(x, v) (HW_CRC_GPOLYLL_WR(x, HW_CRC_GPOLYLL_RD(x) & ~(v))) +#define HW_CRC_GPOLYLL_TOG(x, v) (HW_CRC_GPOLYLL_WR(x, HW_CRC_GPOLYLL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYLL bitfields + */ + +/*! + * @name Register CRC_GPOLYLL, field GPOLYLL[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYLL_GPOLYLL (0U) /*!< Bit position for CRC_GPOLYLL_GPOLYLL. */ +#define BM_CRC_GPOLYLL_GPOLYLL (0xFFU) /*!< Bit mask for CRC_GPOLYLL_GPOLYLL. */ +#define BS_CRC_GPOLYLL_GPOLYLL (8U) /*!< Bit field size in bits for CRC_GPOLYLL_GPOLYLL. */ + +/*! @brief Read current value of the CRC_GPOLYLL_GPOLYLL field. */ +#define BR_CRC_GPOLYLL_GPOLYLL(x) (HW_CRC_GPOLYLL(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYLL_GPOLYLL. */ +#define BF_CRC_GPOLYLL_GPOLYLL(v) ((uint8_t)((uint8_t)(v) << BP_CRC_GPOLYLL_GPOLYLL) & BM_CRC_GPOLYLL_GPOLYLL) + +/*! @brief Set the GPOLYLL field to a new value. */ +#define BW_CRC_GPOLYLL_GPOLYLL(x, v) (HW_CRC_GPOLYLL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYLU - CRC_GPOLYLU register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYLU - CRC_GPOLYLU register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_gpolylu +{ + uint8_t U; + struct _hw_crc_gpolylu_bitfields + { + uint8_t GPOLYLU : 8; /*!< [7:0] POLYLL stores the second 8 bits of + * the 32 bit CRC */ + } B; +} hw_crc_gpolylu_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYLU register + */ +/*@{*/ +#define HW_CRC_GPOLYLU_ADDR(x) ((x) + 0x5U) + +#define HW_CRC_GPOLYLU(x) (*(__IO hw_crc_gpolylu_t *) HW_CRC_GPOLYLU_ADDR(x)) +#define HW_CRC_GPOLYLU_RD(x) (HW_CRC_GPOLYLU(x).U) +#define HW_CRC_GPOLYLU_WR(x, v) (HW_CRC_GPOLYLU(x).U = (v)) +#define HW_CRC_GPOLYLU_SET(x, v) (HW_CRC_GPOLYLU_WR(x, HW_CRC_GPOLYLU_RD(x) | (v))) +#define HW_CRC_GPOLYLU_CLR(x, v) (HW_CRC_GPOLYLU_WR(x, HW_CRC_GPOLYLU_RD(x) & ~(v))) +#define HW_CRC_GPOLYLU_TOG(x, v) (HW_CRC_GPOLYLU_WR(x, HW_CRC_GPOLYLU_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYLU bitfields + */ + +/*! + * @name Register CRC_GPOLYLU, field GPOLYLU[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYLU_GPOLYLU (0U) /*!< Bit position for CRC_GPOLYLU_GPOLYLU. */ +#define BM_CRC_GPOLYLU_GPOLYLU (0xFFU) /*!< Bit mask for CRC_GPOLYLU_GPOLYLU. */ +#define BS_CRC_GPOLYLU_GPOLYLU (8U) /*!< Bit field size in bits for CRC_GPOLYLU_GPOLYLU. */ + +/*! @brief Read current value of the CRC_GPOLYLU_GPOLYLU field. */ +#define BR_CRC_GPOLYLU_GPOLYLU(x) (HW_CRC_GPOLYLU(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYLU_GPOLYLU. */ +#define BF_CRC_GPOLYLU_GPOLYLU(v) ((uint8_t)((uint8_t)(v) << BP_CRC_GPOLYLU_GPOLYLU) & BM_CRC_GPOLYLU_GPOLYLU) + +/*! @brief Set the GPOLYLU field to a new value. */ +#define BW_CRC_GPOLYLU_GPOLYLU(x, v) (HW_CRC_GPOLYLU_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYHL - CRC_GPOLYHL register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYHL - CRC_GPOLYHL register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_gpolyhl +{ + uint8_t U; + struct _hw_crc_gpolyhl_bitfields + { + uint8_t GPOLYHL : 8; /*!< [7:0] POLYHL stores the third 8 bits of the + * 32 bit CRC */ + } B; +} hw_crc_gpolyhl_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYHL register + */ +/*@{*/ +#define HW_CRC_GPOLYHL_ADDR(x) ((x) + 0x6U) + +#define HW_CRC_GPOLYHL(x) (*(__IO hw_crc_gpolyhl_t *) HW_CRC_GPOLYHL_ADDR(x)) +#define HW_CRC_GPOLYHL_RD(x) (HW_CRC_GPOLYHL(x).U) +#define HW_CRC_GPOLYHL_WR(x, v) (HW_CRC_GPOLYHL(x).U = (v)) +#define HW_CRC_GPOLYHL_SET(x, v) (HW_CRC_GPOLYHL_WR(x, HW_CRC_GPOLYHL_RD(x) | (v))) +#define HW_CRC_GPOLYHL_CLR(x, v) (HW_CRC_GPOLYHL_WR(x, HW_CRC_GPOLYHL_RD(x) & ~(v))) +#define HW_CRC_GPOLYHL_TOG(x, v) (HW_CRC_GPOLYHL_WR(x, HW_CRC_GPOLYHL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYHL bitfields + */ + +/*! + * @name Register CRC_GPOLYHL, field GPOLYHL[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYHL_GPOLYHL (0U) /*!< Bit position for CRC_GPOLYHL_GPOLYHL. */ +#define BM_CRC_GPOLYHL_GPOLYHL (0xFFU) /*!< Bit mask for CRC_GPOLYHL_GPOLYHL. */ +#define BS_CRC_GPOLYHL_GPOLYHL (8U) /*!< Bit field size in bits for CRC_GPOLYHL_GPOLYHL. */ + +/*! @brief Read current value of the CRC_GPOLYHL_GPOLYHL field. */ +#define BR_CRC_GPOLYHL_GPOLYHL(x) (HW_CRC_GPOLYHL(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYHL_GPOLYHL. */ +#define BF_CRC_GPOLYHL_GPOLYHL(v) ((uint8_t)((uint8_t)(v) << BP_CRC_GPOLYHL_GPOLYHL) & BM_CRC_GPOLYHL_GPOLYHL) + +/*! @brief Set the GPOLYHL field to a new value. */ +#define BW_CRC_GPOLYHL_GPOLYHL(x, v) (HW_CRC_GPOLYHL_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_CRC_GPOLYHU - CRC_GPOLYHU register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_GPOLYHU - CRC_GPOLYHU register. (RW) + * + * Reset value: 0xFFU + */ +typedef union _hw_crc_gpolyhu +{ + uint8_t U; + struct _hw_crc_gpolyhu_bitfields + { + uint8_t GPOLYHU : 8; /*!< [7:0] POLYHU stores the fourth 8 bits of + * the 32 bit CRC */ + } B; +} hw_crc_gpolyhu_t; + +/*! + * @name Constants and macros for entire CRC_GPOLYHU register + */ +/*@{*/ +#define HW_CRC_GPOLYHU_ADDR(x) ((x) + 0x7U) + +#define HW_CRC_GPOLYHU(x) (*(__IO hw_crc_gpolyhu_t *) HW_CRC_GPOLYHU_ADDR(x)) +#define HW_CRC_GPOLYHU_RD(x) (HW_CRC_GPOLYHU(x).U) +#define HW_CRC_GPOLYHU_WR(x, v) (HW_CRC_GPOLYHU(x).U = (v)) +#define HW_CRC_GPOLYHU_SET(x, v) (HW_CRC_GPOLYHU_WR(x, HW_CRC_GPOLYHU_RD(x) | (v))) +#define HW_CRC_GPOLYHU_CLR(x, v) (HW_CRC_GPOLYHU_WR(x, HW_CRC_GPOLYHU_RD(x) & ~(v))) +#define HW_CRC_GPOLYHU_TOG(x, v) (HW_CRC_GPOLYHU_WR(x, HW_CRC_GPOLYHU_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_GPOLYHU bitfields + */ + +/*! + * @name Register CRC_GPOLYHU, field GPOLYHU[7:0] (RW) + */ +/*@{*/ +#define BP_CRC_GPOLYHU_GPOLYHU (0U) /*!< Bit position for CRC_GPOLYHU_GPOLYHU. */ +#define BM_CRC_GPOLYHU_GPOLYHU (0xFFU) /*!< Bit mask for CRC_GPOLYHU_GPOLYHU. */ +#define BS_CRC_GPOLYHU_GPOLYHU (8U) /*!< Bit field size in bits for CRC_GPOLYHU_GPOLYHU. */ + +/*! @brief Read current value of the CRC_GPOLYHU_GPOLYHU field. */ +#define BR_CRC_GPOLYHU_GPOLYHU(x) (HW_CRC_GPOLYHU(x).U) + +/*! @brief Format value for bitfield CRC_GPOLYHU_GPOLYHU. */ +#define BF_CRC_GPOLYHU_GPOLYHU(v) ((uint8_t)((uint8_t)(v) << BP_CRC_GPOLYHU_GPOLYHU) & BM_CRC_GPOLYHU_GPOLYHU) + +/*! @brief Set the GPOLYHU field to a new value. */ +#define BW_CRC_GPOLYHU_GPOLYHU(x, v) (HW_CRC_GPOLYHU_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_CRC_CTRL - CRC Control register + ******************************************************************************/ + +/*! + * @brief HW_CRC_CTRL - CRC Control register (RW) + * + * Reset value: 0x00000000U + * + * This register controls the configuration and working of the CRC module. + * Appropriate bits must be set before starting a new CRC calculation. A new CRC + * calculation is initialized by asserting CTRL[WAS] and then writing the seed into + * the CRC data register. + */ +typedef union _hw_crc_ctrl +{ + uint32_t U; + struct _hw_crc_ctrl_bitfields + { + uint32_t RESERVED0 : 24; /*!< [23:0] */ + uint32_t TCRC : 1; /*!< [24] */ + uint32_t WAS : 1; /*!< [25] Write CRC Data Register As Seed */ + uint32_t FXOR : 1; /*!< [26] Complement Read Of CRC Data Register */ + uint32_t RESERVED1 : 1; /*!< [27] */ + uint32_t TOTR : 2; /*!< [29:28] Type Of Transpose For Read */ + uint32_t TOT : 2; /*!< [31:30] Type Of Transpose For Writes */ + } B; +} hw_crc_ctrl_t; + +/*! + * @name Constants and macros for entire CRC_CTRL register + */ +/*@{*/ +#define HW_CRC_CTRL_ADDR(x) ((x) + 0x8U) + +#define HW_CRC_CTRL(x) (*(__IO hw_crc_ctrl_t *) HW_CRC_CTRL_ADDR(x)) +#define HW_CRC_CTRL_RD(x) (HW_CRC_CTRL(x).U) +#define HW_CRC_CTRL_WR(x, v) (HW_CRC_CTRL(x).U = (v)) +#define HW_CRC_CTRL_SET(x, v) (HW_CRC_CTRL_WR(x, HW_CRC_CTRL_RD(x) | (v))) +#define HW_CRC_CTRL_CLR(x, v) (HW_CRC_CTRL_WR(x, HW_CRC_CTRL_RD(x) & ~(v))) +#define HW_CRC_CTRL_TOG(x, v) (HW_CRC_CTRL_WR(x, HW_CRC_CTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_CTRL bitfields + */ + +/*! + * @name Register CRC_CTRL, field TCRC[24] (RW) + * + * Width of CRC protocol. + * + * Values: + * - 0 - 16-bit CRC protocol. + * - 1 - 32-bit CRC protocol. + */ +/*@{*/ +#define BP_CRC_CTRL_TCRC (24U) /*!< Bit position for CRC_CTRL_TCRC. */ +#define BM_CRC_CTRL_TCRC (0x01000000U) /*!< Bit mask for CRC_CTRL_TCRC. */ +#define BS_CRC_CTRL_TCRC (1U) /*!< Bit field size in bits for CRC_CTRL_TCRC. */ + +/*! @brief Read current value of the CRC_CTRL_TCRC field. */ +#define BR_CRC_CTRL_TCRC(x) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_TCRC)) + +/*! @brief Format value for bitfield CRC_CTRL_TCRC. */ +#define BF_CRC_CTRL_TCRC(v) ((uint32_t)((uint32_t)(v) << BP_CRC_CTRL_TCRC) & BM_CRC_CTRL_TCRC) + +/*! @brief Set the TCRC field to a new value. */ +#define BW_CRC_CTRL_TCRC(x, v) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_TCRC) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRL, field WAS[25] (RW) + * + * When asserted, a value written to the CRC data register is considered a seed + * value. When deasserted, a value written to the CRC data register is taken as + * data for CRC computation. + * + * Values: + * - 0 - Writes to the CRC data register are data values. + * - 1 - Writes to the CRC data register are seed values. + */ +/*@{*/ +#define BP_CRC_CTRL_WAS (25U) /*!< Bit position for CRC_CTRL_WAS. */ +#define BM_CRC_CTRL_WAS (0x02000000U) /*!< Bit mask for CRC_CTRL_WAS. */ +#define BS_CRC_CTRL_WAS (1U) /*!< Bit field size in bits for CRC_CTRL_WAS. */ + +/*! @brief Read current value of the CRC_CTRL_WAS field. */ +#define BR_CRC_CTRL_WAS(x) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_WAS)) + +/*! @brief Format value for bitfield CRC_CTRL_WAS. */ +#define BF_CRC_CTRL_WAS(v) ((uint32_t)((uint32_t)(v) << BP_CRC_CTRL_WAS) & BM_CRC_CTRL_WAS) + +/*! @brief Set the WAS field to a new value. */ +#define BW_CRC_CTRL_WAS(x, v) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_WAS) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRL, field FXOR[26] (RW) + * + * Some CRC protocols require the final checksum to be XORed with 0xFFFFFFFF or + * 0xFFFF. Asserting this bit enables on the fly complementing of read data. + * + * Values: + * - 0 - No XOR on reading. + * - 1 - Invert or complement the read value of the CRC Data register. + */ +/*@{*/ +#define BP_CRC_CTRL_FXOR (26U) /*!< Bit position for CRC_CTRL_FXOR. */ +#define BM_CRC_CTRL_FXOR (0x04000000U) /*!< Bit mask for CRC_CTRL_FXOR. */ +#define BS_CRC_CTRL_FXOR (1U) /*!< Bit field size in bits for CRC_CTRL_FXOR. */ + +/*! @brief Read current value of the CRC_CTRL_FXOR field. */ +#define BR_CRC_CTRL_FXOR(x) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_FXOR)) + +/*! @brief Format value for bitfield CRC_CTRL_FXOR. */ +#define BF_CRC_CTRL_FXOR(v) ((uint32_t)((uint32_t)(v) << BP_CRC_CTRL_FXOR) & BM_CRC_CTRL_FXOR) + +/*! @brief Set the FXOR field to a new value. */ +#define BW_CRC_CTRL_FXOR(x, v) (BITBAND_ACCESS32(HW_CRC_CTRL_ADDR(x), BP_CRC_CTRL_FXOR) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRL, field TOTR[29:28] (RW) + * + * Identifies the transpose configuration of the value read from the CRC Data + * register. See the description of the transpose feature for the available + * transpose options. + * + * Values: + * - 00 - No transposition. + * - 01 - Bits in bytes are transposed; bytes are not transposed. + * - 10 - Both bits in bytes and bytes are transposed. + * - 11 - Only bytes are transposed; no bits in a byte are transposed. + */ +/*@{*/ +#define BP_CRC_CTRL_TOTR (28U) /*!< Bit position for CRC_CTRL_TOTR. */ +#define BM_CRC_CTRL_TOTR (0x30000000U) /*!< Bit mask for CRC_CTRL_TOTR. */ +#define BS_CRC_CTRL_TOTR (2U) /*!< Bit field size in bits for CRC_CTRL_TOTR. */ + +/*! @brief Read current value of the CRC_CTRL_TOTR field. */ +#define BR_CRC_CTRL_TOTR(x) (HW_CRC_CTRL(x).B.TOTR) + +/*! @brief Format value for bitfield CRC_CTRL_TOTR. */ +#define BF_CRC_CTRL_TOTR(v) ((uint32_t)((uint32_t)(v) << BP_CRC_CTRL_TOTR) & BM_CRC_CTRL_TOTR) + +/*! @brief Set the TOTR field to a new value. */ +#define BW_CRC_CTRL_TOTR(x, v) (HW_CRC_CTRL_WR(x, (HW_CRC_CTRL_RD(x) & ~BM_CRC_CTRL_TOTR) | BF_CRC_CTRL_TOTR(v))) +/*@}*/ + +/*! + * @name Register CRC_CTRL, field TOT[31:30] (RW) + * + * Defines the transpose configuration of the data written to the CRC data + * register. See the description of the transpose feature for the available transpose + * options. + * + * Values: + * - 00 - No transposition. + * - 01 - Bits in bytes are transposed; bytes are not transposed. + * - 10 - Both bits in bytes and bytes are transposed. + * - 11 - Only bytes are transposed; no bits in a byte are transposed. + */ +/*@{*/ +#define BP_CRC_CTRL_TOT (30U) /*!< Bit position for CRC_CTRL_TOT. */ +#define BM_CRC_CTRL_TOT (0xC0000000U) /*!< Bit mask for CRC_CTRL_TOT. */ +#define BS_CRC_CTRL_TOT (2U) /*!< Bit field size in bits for CRC_CTRL_TOT. */ + +/*! @brief Read current value of the CRC_CTRL_TOT field. */ +#define BR_CRC_CTRL_TOT(x) (HW_CRC_CTRL(x).B.TOT) + +/*! @brief Format value for bitfield CRC_CTRL_TOT. */ +#define BF_CRC_CTRL_TOT(v) ((uint32_t)((uint32_t)(v) << BP_CRC_CTRL_TOT) & BM_CRC_CTRL_TOT) + +/*! @brief Set the TOT field to a new value. */ +#define BW_CRC_CTRL_TOT(x, v) (HW_CRC_CTRL_WR(x, (HW_CRC_CTRL_RD(x) & ~BM_CRC_CTRL_TOT) | BF_CRC_CTRL_TOT(v))) +/*@}*/ +/******************************************************************************* + * HW_CRC_CTRLHU - CRC_CTRLHU register. + ******************************************************************************/ + +/*! + * @brief HW_CRC_CTRLHU - CRC_CTRLHU register. (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_crc_ctrlhu +{ + uint8_t U; + struct _hw_crc_ctrlhu_bitfields + { + uint8_t TCRC : 1; /*!< [0] */ + uint8_t WAS : 1; /*!< [1] */ + uint8_t FXOR : 1; /*!< [2] */ + uint8_t RESERVED0 : 1; /*!< [3] */ + uint8_t TOTR : 2; /*!< [5:4] */ + uint8_t TOT : 2; /*!< [7:6] */ + } B; +} hw_crc_ctrlhu_t; + +/*! + * @name Constants and macros for entire CRC_CTRLHU register + */ +/*@{*/ +#define HW_CRC_CTRLHU_ADDR(x) ((x) + 0xBU) + +#define HW_CRC_CTRLHU(x) (*(__IO hw_crc_ctrlhu_t *) HW_CRC_CTRLHU_ADDR(x)) +#define HW_CRC_CTRLHU_RD(x) (HW_CRC_CTRLHU(x).U) +#define HW_CRC_CTRLHU_WR(x, v) (HW_CRC_CTRLHU(x).U = (v)) +#define HW_CRC_CTRLHU_SET(x, v) (HW_CRC_CTRLHU_WR(x, HW_CRC_CTRLHU_RD(x) | (v))) +#define HW_CRC_CTRLHU_CLR(x, v) (HW_CRC_CTRLHU_WR(x, HW_CRC_CTRLHU_RD(x) & ~(v))) +#define HW_CRC_CTRLHU_TOG(x, v) (HW_CRC_CTRLHU_WR(x, HW_CRC_CTRLHU_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual CRC_CTRLHU bitfields + */ + +/*! + * @name Register CRC_CTRLHU, field TCRC[0] (RW) + * + * Values: + * - 0 - 16-bit CRC protocol. + * - 1 - 32-bit CRC protocol. + */ +/*@{*/ +#define BP_CRC_CTRLHU_TCRC (0U) /*!< Bit position for CRC_CTRLHU_TCRC. */ +#define BM_CRC_CTRLHU_TCRC (0x01U) /*!< Bit mask for CRC_CTRLHU_TCRC. */ +#define BS_CRC_CTRLHU_TCRC (1U) /*!< Bit field size in bits for CRC_CTRLHU_TCRC. */ + +/*! @brief Read current value of the CRC_CTRLHU_TCRC field. */ +#define BR_CRC_CTRLHU_TCRC(x) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_TCRC)) + +/*! @brief Format value for bitfield CRC_CTRLHU_TCRC. */ +#define BF_CRC_CTRLHU_TCRC(v) ((uint8_t)((uint8_t)(v) << BP_CRC_CTRLHU_TCRC) & BM_CRC_CTRLHU_TCRC) + +/*! @brief Set the TCRC field to a new value. */ +#define BW_CRC_CTRLHU_TCRC(x, v) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_TCRC) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRLHU, field WAS[1] (RW) + * + * Values: + * - 0 - Writes to CRC data register are data values. + * - 1 - Writes to CRC data reguster are seed values. + */ +/*@{*/ +#define BP_CRC_CTRLHU_WAS (1U) /*!< Bit position for CRC_CTRLHU_WAS. */ +#define BM_CRC_CTRLHU_WAS (0x02U) /*!< Bit mask for CRC_CTRLHU_WAS. */ +#define BS_CRC_CTRLHU_WAS (1U) /*!< Bit field size in bits for CRC_CTRLHU_WAS. */ + +/*! @brief Read current value of the CRC_CTRLHU_WAS field. */ +#define BR_CRC_CTRLHU_WAS(x) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_WAS)) + +/*! @brief Format value for bitfield CRC_CTRLHU_WAS. */ +#define BF_CRC_CTRLHU_WAS(v) ((uint8_t)((uint8_t)(v) << BP_CRC_CTRLHU_WAS) & BM_CRC_CTRLHU_WAS) + +/*! @brief Set the WAS field to a new value. */ +#define BW_CRC_CTRLHU_WAS(x, v) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_WAS) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRLHU, field FXOR[2] (RW) + * + * Values: + * - 0 - No XOR on reading. + * - 1 - Invert or complement the read value of CRC data register. + */ +/*@{*/ +#define BP_CRC_CTRLHU_FXOR (2U) /*!< Bit position for CRC_CTRLHU_FXOR. */ +#define BM_CRC_CTRLHU_FXOR (0x04U) /*!< Bit mask for CRC_CTRLHU_FXOR. */ +#define BS_CRC_CTRLHU_FXOR (1U) /*!< Bit field size in bits for CRC_CTRLHU_FXOR. */ + +/*! @brief Read current value of the CRC_CTRLHU_FXOR field. */ +#define BR_CRC_CTRLHU_FXOR(x) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_FXOR)) + +/*! @brief Format value for bitfield CRC_CTRLHU_FXOR. */ +#define BF_CRC_CTRLHU_FXOR(v) ((uint8_t)((uint8_t)(v) << BP_CRC_CTRLHU_FXOR) & BM_CRC_CTRLHU_FXOR) + +/*! @brief Set the FXOR field to a new value. */ +#define BW_CRC_CTRLHU_FXOR(x, v) (BITBAND_ACCESS8(HW_CRC_CTRLHU_ADDR(x), BP_CRC_CTRLHU_FXOR) = (v)) +/*@}*/ + +/*! + * @name Register CRC_CTRLHU, field TOTR[5:4] (RW) + * + * Values: + * - 00 - No Transposition. + * - 01 - Bits in bytes are transposed, bytes are not transposed. + * - 10 - Both bits in bytes and bytes are transposed. + * - 11 - Only bytes are transposed; no bits in a byte are transposed. + */ +/*@{*/ +#define BP_CRC_CTRLHU_TOTR (4U) /*!< Bit position for CRC_CTRLHU_TOTR. */ +#define BM_CRC_CTRLHU_TOTR (0x30U) /*!< Bit mask for CRC_CTRLHU_TOTR. */ +#define BS_CRC_CTRLHU_TOTR (2U) /*!< Bit field size in bits for CRC_CTRLHU_TOTR. */ + +/*! @brief Read current value of the CRC_CTRLHU_TOTR field. */ +#define BR_CRC_CTRLHU_TOTR(x) (HW_CRC_CTRLHU(x).B.TOTR) + +/*! @brief Format value for bitfield CRC_CTRLHU_TOTR. */ +#define BF_CRC_CTRLHU_TOTR(v) ((uint8_t)((uint8_t)(v) << BP_CRC_CTRLHU_TOTR) & BM_CRC_CTRLHU_TOTR) + +/*! @brief Set the TOTR field to a new value. */ +#define BW_CRC_CTRLHU_TOTR(x, v) (HW_CRC_CTRLHU_WR(x, (HW_CRC_CTRLHU_RD(x) & ~BM_CRC_CTRLHU_TOTR) | BF_CRC_CTRLHU_TOTR(v))) +/*@}*/ + +/*! + * @name Register CRC_CTRLHU, field TOT[7:6] (RW) + * + * Values: + * - 00 - No Transposition. + * - 01 - Bits in bytes are transposed, bytes are not transposed. + * - 10 - Both bits in bytes and bytes are transposed. + * - 11 - Only bytes are transposed; no bits in a byte are transposed. + */ +/*@{*/ +#define BP_CRC_CTRLHU_TOT (6U) /*!< Bit position for CRC_CTRLHU_TOT. */ +#define BM_CRC_CTRLHU_TOT (0xC0U) /*!< Bit mask for CRC_CTRLHU_TOT. */ +#define BS_CRC_CTRLHU_TOT (2U) /*!< Bit field size in bits for CRC_CTRLHU_TOT. */ + +/*! @brief Read current value of the CRC_CTRLHU_TOT field. */ +#define BR_CRC_CTRLHU_TOT(x) (HW_CRC_CTRLHU(x).B.TOT) + +/*! @brief Format value for bitfield CRC_CTRLHU_TOT. */ +#define BF_CRC_CTRLHU_TOT(v) ((uint8_t)((uint8_t)(v) << BP_CRC_CTRLHU_TOT) & BM_CRC_CTRLHU_TOT) + +/*! @brief Set the TOT field to a new value. */ +#define BW_CRC_CTRLHU_TOT(x, v) (HW_CRC_CTRLHU_WR(x, (HW_CRC_CTRLHU_RD(x) & ~BM_CRC_CTRLHU_TOT) | BF_CRC_CTRLHU_TOT(v))) +/*@}*/ + +/* +** Start of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma push + #pragma anon_unions +#elif defined(__CWCC__) + #pragma push + #pragma cpp_extensions on +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=extended +#else + #error Not supported compiler type +#endif + +/******************************************************************************* + * hw_crc_t - module struct + ******************************************************************************/ +/*! + * @brief All CRC module registers. + */ +#pragma pack(1) +typedef struct _hw_crc +{ + union { + struct { + __IO hw_crc_datal_t DATAL; /*!< [0x0] CRC_DATAL register. */ + __IO hw_crc_datah_t DATAH; /*!< [0x2] CRC_DATAH register. */ + } ACCESS16BIT; + struct { + __IO hw_crc_datall_t DATALL; /*!< [0x0] CRC_DATALL register. */ + __IO hw_crc_datalu_t DATALU; /*!< [0x1] CRC_DATALU register. */ + __IO hw_crc_datahl_t DATAHL; /*!< [0x2] CRC_DATAHL register. */ + __IO hw_crc_datahu_t DATAHU; /*!< [0x3] CRC_DATAHU register. */ + } ACCESS8BIT; + __IO hw_crc_data_t DATA; /*!< [0x0] CRC Data register */ + }; + union { + __IO hw_crc_gpoly_t GPOLY; /*!< [0x4] CRC Polynomial register */ + struct { + __IO hw_crc_gpolyl_t GPOLYL; /*!< [0x4] CRC_GPOLYL register. */ + __IO hw_crc_gpolyh_t GPOLYH; /*!< [0x6] CRC_GPOLYH register. */ + } GPOLY_ACCESS16BIT; + struct { + __IO hw_crc_gpolyll_t GPOLYLL; /*!< [0x4] CRC_GPOLYLL register. */ + __IO hw_crc_gpolylu_t GPOLYLU; /*!< [0x5] CRC_GPOLYLU register. */ + __IO hw_crc_gpolyhl_t GPOLYHL; /*!< [0x6] CRC_GPOLYHL register. */ + __IO hw_crc_gpolyhu_t GPOLYHU; /*!< [0x7] CRC_GPOLYHU register. */ + } GPOLY_ACCESS8BIT; + }; + union { + __IO hw_crc_ctrl_t CTRL; /*!< [0x8] CRC Control register */ + struct { + uint8_t _reserved0[3]; + __IO hw_crc_ctrlhu_t CTRLHU; /*!< [0xB] CRC_CTRLHU register. */ + } CTRL_ACCESS8BIT; + }; +} hw_crc_t; +#pragma pack() + +/*! @brief Macro to access all CRC registers. */ +/*! @param x CRC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_CRC(CRC_BASE)</code>. */ +#define HW_CRC(x) (*(hw_crc_t *)(x)) + +/* +** End of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma pop +#elif defined(__CWCC__) + #pragma pop +#elif defined(__GNUC__) + /* leave anonymous unions enabled */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=default +#else + #error Not supported compiler type +#endif + +#endif /* __HW_CRC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dac.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dac.h new file mode 100644 index 0000000000..87d4272df0 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dac.h @@ -0,0 +1,837 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_DAC_REGISTERS_H__ +#define __HW_DAC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 DAC + * + * 12-Bit Digital-to-Analog Converter + * + * Registers defined in this header file: + * - HW_DAC_DATnL - DAC Data Low Register + * - HW_DAC_DATnH - DAC Data High Register + * - HW_DAC_SR - DAC Status Register + * - HW_DAC_C0 - DAC Control Register + * - HW_DAC_C1 - DAC Control Register 1 + * - HW_DAC_C2 - DAC Control Register 2 + * + * - hw_dac_t - Struct containing all module registers. + */ + +#define HW_DAC_INSTANCE_COUNT (2U) /*!< Number of instances of the DAC module. */ +#define HW_DAC0 (0U) /*!< Instance number for DAC0. */ +#define HW_DAC1 (1U) /*!< Instance number for DAC1. */ + +/******************************************************************************* + * HW_DAC_DATnL - DAC Data Low Register + ******************************************************************************/ + +/*! + * @brief HW_DAC_DATnL - DAC Data Low Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_dac_datnl +{ + uint8_t U; + struct _hw_dac_datnl_bitfields + { + uint8_t DATA0 : 8; /*!< [7:0] */ + } B; +} hw_dac_datnl_t; + +/*! + * @name Constants and macros for entire DAC_DATnL register + */ +/*@{*/ +#define HW_DAC_DATnL_COUNT (16U) + +#define HW_DAC_DATnL_ADDR(x, n) ((x) + 0x0U + (0x2U * (n))) + +#define HW_DAC_DATnL(x, n) (*(__IO hw_dac_datnl_t *) HW_DAC_DATnL_ADDR(x, n)) +#define HW_DAC_DATnL_RD(x, n) (HW_DAC_DATnL(x, n).U) +#define HW_DAC_DATnL_WR(x, n, v) (HW_DAC_DATnL(x, n).U = (v)) +#define HW_DAC_DATnL_SET(x, n, v) (HW_DAC_DATnL_WR(x, n, HW_DAC_DATnL_RD(x, n) | (v))) +#define HW_DAC_DATnL_CLR(x, n, v) (HW_DAC_DATnL_WR(x, n, HW_DAC_DATnL_RD(x, n) & ~(v))) +#define HW_DAC_DATnL_TOG(x, n, v) (HW_DAC_DATnL_WR(x, n, HW_DAC_DATnL_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_DATnL bitfields + */ + +/*! + * @name Register DAC_DATnL, field DATA0[7:0] (RW) + * + * When the DAC buffer is not enabled, DATA[11:0] controls the output voltage + * based on the following formula: V out = V in * (1 + DACDAT0[11:0])/4096 When the + * DAC buffer is enabled, DATA is mapped to the 16-word buffer. + */ +/*@{*/ +#define BP_DAC_DATnL_DATA0 (0U) /*!< Bit position for DAC_DATnL_DATA0. */ +#define BM_DAC_DATnL_DATA0 (0xFFU) /*!< Bit mask for DAC_DATnL_DATA0. */ +#define BS_DAC_DATnL_DATA0 (8U) /*!< Bit field size in bits for DAC_DATnL_DATA0. */ + +/*! @brief Read current value of the DAC_DATnL_DATA0 field. */ +#define BR_DAC_DATnL_DATA0(x, n) (HW_DAC_DATnL(x, n).U) + +/*! @brief Format value for bitfield DAC_DATnL_DATA0. */ +#define BF_DAC_DATnL_DATA0(v) ((uint8_t)((uint8_t)(v) << BP_DAC_DATnL_DATA0) & BM_DAC_DATnL_DATA0) + +/*! @brief Set the DATA0 field to a new value. */ +#define BW_DAC_DATnL_DATA0(x, n, v) (HW_DAC_DATnL_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DAC_DATnH - DAC Data High Register + ******************************************************************************/ + +/*! + * @brief HW_DAC_DATnH - DAC Data High Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_dac_datnh +{ + uint8_t U; + struct _hw_dac_datnh_bitfields + { + uint8_t DATA1 : 4; /*!< [3:0] */ + uint8_t RESERVED0 : 4; /*!< [7:4] */ + } B; +} hw_dac_datnh_t; + +/*! + * @name Constants and macros for entire DAC_DATnH register + */ +/*@{*/ +#define HW_DAC_DATnH_COUNT (16U) + +#define HW_DAC_DATnH_ADDR(x, n) ((x) + 0x1U + (0x2U * (n))) + +#define HW_DAC_DATnH(x, n) (*(__IO hw_dac_datnh_t *) HW_DAC_DATnH_ADDR(x, n)) +#define HW_DAC_DATnH_RD(x, n) (HW_DAC_DATnH(x, n).U) +#define HW_DAC_DATnH_WR(x, n, v) (HW_DAC_DATnH(x, n).U = (v)) +#define HW_DAC_DATnH_SET(x, n, v) (HW_DAC_DATnH_WR(x, n, HW_DAC_DATnH_RD(x, n) | (v))) +#define HW_DAC_DATnH_CLR(x, n, v) (HW_DAC_DATnH_WR(x, n, HW_DAC_DATnH_RD(x, n) & ~(v))) +#define HW_DAC_DATnH_TOG(x, n, v) (HW_DAC_DATnH_WR(x, n, HW_DAC_DATnH_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_DATnH bitfields + */ + +/*! + * @name Register DAC_DATnH, field DATA1[3:0] (RW) + * + * When the DAC Buffer is not enabled, DATA[11:0] controls the output voltage + * based on the following formula. V out = V in * (1 + DACDAT0[11:0])/4096 When the + * DAC buffer is enabled, DATA[11:0] is mapped to the 16-word buffer. + */ +/*@{*/ +#define BP_DAC_DATnH_DATA1 (0U) /*!< Bit position for DAC_DATnH_DATA1. */ +#define BM_DAC_DATnH_DATA1 (0x0FU) /*!< Bit mask for DAC_DATnH_DATA1. */ +#define BS_DAC_DATnH_DATA1 (4U) /*!< Bit field size in bits for DAC_DATnH_DATA1. */ + +/*! @brief Read current value of the DAC_DATnH_DATA1 field. */ +#define BR_DAC_DATnH_DATA1(x, n) (HW_DAC_DATnH(x, n).B.DATA1) + +/*! @brief Format value for bitfield DAC_DATnH_DATA1. */ +#define BF_DAC_DATnH_DATA1(v) ((uint8_t)((uint8_t)(v) << BP_DAC_DATnH_DATA1) & BM_DAC_DATnH_DATA1) + +/*! @brief Set the DATA1 field to a new value. */ +#define BW_DAC_DATnH_DATA1(x, n, v) (HW_DAC_DATnH_WR(x, n, (HW_DAC_DATnH_RD(x, n) & ~BM_DAC_DATnH_DATA1) | BF_DAC_DATnH_DATA1(v))) +/*@}*/ + +/******************************************************************************* + * HW_DAC_SR - DAC Status Register + ******************************************************************************/ + +/*! + * @brief HW_DAC_SR - DAC Status Register (RW) + * + * Reset value: 0x02U + * + * If DMA is enabled, the flags can be cleared automatically by DMA when the DMA + * request is done. Writing 0 to a field clears it whereas writing 1 has no + * effect. After reset, DACBFRPTF is set and can be cleared by software, if needed. + * The flags are set only when the data buffer status is changed. + */ +typedef union _hw_dac_sr +{ + uint8_t U; + struct _hw_dac_sr_bitfields + { + uint8_t DACBFRPBF : 1; /*!< [0] DAC Buffer Read Pointer Bottom + * Position Flag */ + uint8_t DACBFRPTF : 1; /*!< [1] DAC Buffer Read Pointer Top Position + * Flag */ + uint8_t DACBFWMF : 1; /*!< [2] DAC Buffer Watermark Flag */ + uint8_t RESERVED0 : 5; /*!< [7:3] */ + } B; +} hw_dac_sr_t; + +/*! + * @name Constants and macros for entire DAC_SR register + */ +/*@{*/ +#define HW_DAC_SR_ADDR(x) ((x) + 0x20U) + +#define HW_DAC_SR(x) (*(__IO hw_dac_sr_t *) HW_DAC_SR_ADDR(x)) +#define HW_DAC_SR_RD(x) (HW_DAC_SR(x).U) +#define HW_DAC_SR_WR(x, v) (HW_DAC_SR(x).U = (v)) +#define HW_DAC_SR_SET(x, v) (HW_DAC_SR_WR(x, HW_DAC_SR_RD(x) | (v))) +#define HW_DAC_SR_CLR(x, v) (HW_DAC_SR_WR(x, HW_DAC_SR_RD(x) & ~(v))) +#define HW_DAC_SR_TOG(x, v) (HW_DAC_SR_WR(x, HW_DAC_SR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_SR bitfields + */ + +/*! + * @name Register DAC_SR, field DACBFRPBF[0] (RW) + * + * In FIFO mode, it is FIFO FULL status bit. It means FIFO read pointer equals + * Write Pointer because of Write Pointer increase. If this bit is set, any write + * to FIFO from either DMA or CPU is ignored by DAC. It is cleared if there is + * any DAC trigger making the DAC read pointer increase. Write to this bit is + * ignored in FIFO mode. + * + * Values: + * - 0 - The DAC buffer read pointer is not equal to C2[DACBFUP]. + * - 1 - The DAC buffer read pointer is equal to C2[DACBFUP]. + */ +/*@{*/ +#define BP_DAC_SR_DACBFRPBF (0U) /*!< Bit position for DAC_SR_DACBFRPBF. */ +#define BM_DAC_SR_DACBFRPBF (0x01U) /*!< Bit mask for DAC_SR_DACBFRPBF. */ +#define BS_DAC_SR_DACBFRPBF (1U) /*!< Bit field size in bits for DAC_SR_DACBFRPBF. */ + +/*! @brief Read current value of the DAC_SR_DACBFRPBF field. */ +#define BR_DAC_SR_DACBFRPBF(x) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFRPBF)) + +/*! @brief Format value for bitfield DAC_SR_DACBFRPBF. */ +#define BF_DAC_SR_DACBFRPBF(v) ((uint8_t)((uint8_t)(v) << BP_DAC_SR_DACBFRPBF) & BM_DAC_SR_DACBFRPBF) + +/*! @brief Set the DACBFRPBF field to a new value. */ +#define BW_DAC_SR_DACBFRPBF(x, v) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFRPBF) = (v)) +/*@}*/ + +/*! + * @name Register DAC_SR, field DACBFRPTF[1] (RW) + * + * In FIFO mode, it is FIFO nearly empty flag. It is set when only one data + * remains in FIFO. Any DAC trigger does not increase the Read Pointer if this bit is + * set to avoid any possible glitch or abrupt change at DAC output. It is + * cleared automatically if FIFO is not empty. + * + * Values: + * - 0 - The DAC buffer read pointer is not zero. + * - 1 - The DAC buffer read pointer is zero. + */ +/*@{*/ +#define BP_DAC_SR_DACBFRPTF (1U) /*!< Bit position for DAC_SR_DACBFRPTF. */ +#define BM_DAC_SR_DACBFRPTF (0x02U) /*!< Bit mask for DAC_SR_DACBFRPTF. */ +#define BS_DAC_SR_DACBFRPTF (1U) /*!< Bit field size in bits for DAC_SR_DACBFRPTF. */ + +/*! @brief Read current value of the DAC_SR_DACBFRPTF field. */ +#define BR_DAC_SR_DACBFRPTF(x) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFRPTF)) + +/*! @brief Format value for bitfield DAC_SR_DACBFRPTF. */ +#define BF_DAC_SR_DACBFRPTF(v) ((uint8_t)((uint8_t)(v) << BP_DAC_SR_DACBFRPTF) & BM_DAC_SR_DACBFRPTF) + +/*! @brief Set the DACBFRPTF field to a new value. */ +#define BW_DAC_SR_DACBFRPTF(x, v) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFRPTF) = (v)) +/*@}*/ + +/*! + * @name Register DAC_SR, field DACBFWMF[2] (RW) + * + * This bit is set if the remaining FIFO data is less than the watermark + * setting. It is cleared automatically by writing data into FIFO by DMA or CPU. Write + * to this bit is ignored in FIFO mode. + * + * Values: + * - 0 - The DAC buffer read pointer has not reached the watermark level. + * - 1 - The DAC buffer read pointer has reached the watermark level. + */ +/*@{*/ +#define BP_DAC_SR_DACBFWMF (2U) /*!< Bit position for DAC_SR_DACBFWMF. */ +#define BM_DAC_SR_DACBFWMF (0x04U) /*!< Bit mask for DAC_SR_DACBFWMF. */ +#define BS_DAC_SR_DACBFWMF (1U) /*!< Bit field size in bits for DAC_SR_DACBFWMF. */ + +/*! @brief Read current value of the DAC_SR_DACBFWMF field. */ +#define BR_DAC_SR_DACBFWMF(x) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFWMF)) + +/*! @brief Format value for bitfield DAC_SR_DACBFWMF. */ +#define BF_DAC_SR_DACBFWMF(v) ((uint8_t)((uint8_t)(v) << BP_DAC_SR_DACBFWMF) & BM_DAC_SR_DACBFWMF) + +/*! @brief Set the DACBFWMF field to a new value. */ +#define BW_DAC_SR_DACBFWMF(x, v) (BITBAND_ACCESS8(HW_DAC_SR_ADDR(x), BP_DAC_SR_DACBFWMF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DAC_C0 - DAC Control Register + ******************************************************************************/ + +/*! + * @brief HW_DAC_C0 - DAC Control Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_dac_c0 +{ + uint8_t U; + struct _hw_dac_c0_bitfields + { + uint8_t DACBBIEN : 1; /*!< [0] DAC Buffer Read Pointer Bottom Flag + * Interrupt Enable */ + uint8_t DACBTIEN : 1; /*!< [1] DAC Buffer Read Pointer Top Flag + * Interrupt Enable */ + uint8_t DACBWIEN : 1; /*!< [2] DAC Buffer Watermark Interrupt Enable + * */ + uint8_t LPEN : 1; /*!< [3] DAC Low Power Control */ + uint8_t DACSWTRG : 1; /*!< [4] DAC Software Trigger */ + uint8_t DACTRGSEL : 1; /*!< [5] DAC Trigger Select */ + uint8_t DACRFS : 1; /*!< [6] DAC Reference Select */ + uint8_t DACEN : 1; /*!< [7] DAC Enable */ + } B; +} hw_dac_c0_t; + +/*! + * @name Constants and macros for entire DAC_C0 register + */ +/*@{*/ +#define HW_DAC_C0_ADDR(x) ((x) + 0x21U) + +#define HW_DAC_C0(x) (*(__IO hw_dac_c0_t *) HW_DAC_C0_ADDR(x)) +#define HW_DAC_C0_RD(x) (HW_DAC_C0(x).U) +#define HW_DAC_C0_WR(x, v) (HW_DAC_C0(x).U = (v)) +#define HW_DAC_C0_SET(x, v) (HW_DAC_C0_WR(x, HW_DAC_C0_RD(x) | (v))) +#define HW_DAC_C0_CLR(x, v) (HW_DAC_C0_WR(x, HW_DAC_C0_RD(x) & ~(v))) +#define HW_DAC_C0_TOG(x, v) (HW_DAC_C0_WR(x, HW_DAC_C0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_C0 bitfields + */ + +/*! + * @name Register DAC_C0, field DACBBIEN[0] (RW) + * + * Values: + * - 0 - The DAC buffer read pointer bottom flag interrupt is disabled. + * - 1 - The DAC buffer read pointer bottom flag interrupt is enabled. + */ +/*@{*/ +#define BP_DAC_C0_DACBBIEN (0U) /*!< Bit position for DAC_C0_DACBBIEN. */ +#define BM_DAC_C0_DACBBIEN (0x01U) /*!< Bit mask for DAC_C0_DACBBIEN. */ +#define BS_DAC_C0_DACBBIEN (1U) /*!< Bit field size in bits for DAC_C0_DACBBIEN. */ + +/*! @brief Read current value of the DAC_C0_DACBBIEN field. */ +#define BR_DAC_C0_DACBBIEN(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBBIEN)) + +/*! @brief Format value for bitfield DAC_C0_DACBBIEN. */ +#define BF_DAC_C0_DACBBIEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACBBIEN) & BM_DAC_C0_DACBBIEN) + +/*! @brief Set the DACBBIEN field to a new value. */ +#define BW_DAC_C0_DACBBIEN(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBBIEN) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACBTIEN[1] (RW) + * + * Values: + * - 0 - The DAC buffer read pointer top flag interrupt is disabled. + * - 1 - The DAC buffer read pointer top flag interrupt is enabled. + */ +/*@{*/ +#define BP_DAC_C0_DACBTIEN (1U) /*!< Bit position for DAC_C0_DACBTIEN. */ +#define BM_DAC_C0_DACBTIEN (0x02U) /*!< Bit mask for DAC_C0_DACBTIEN. */ +#define BS_DAC_C0_DACBTIEN (1U) /*!< Bit field size in bits for DAC_C0_DACBTIEN. */ + +/*! @brief Read current value of the DAC_C0_DACBTIEN field. */ +#define BR_DAC_C0_DACBTIEN(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBTIEN)) + +/*! @brief Format value for bitfield DAC_C0_DACBTIEN. */ +#define BF_DAC_C0_DACBTIEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACBTIEN) & BM_DAC_C0_DACBTIEN) + +/*! @brief Set the DACBTIEN field to a new value. */ +#define BW_DAC_C0_DACBTIEN(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBTIEN) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACBWIEN[2] (RW) + * + * Values: + * - 0 - The DAC buffer watermark interrupt is disabled. + * - 1 - The DAC buffer watermark interrupt is enabled. + */ +/*@{*/ +#define BP_DAC_C0_DACBWIEN (2U) /*!< Bit position for DAC_C0_DACBWIEN. */ +#define BM_DAC_C0_DACBWIEN (0x04U) /*!< Bit mask for DAC_C0_DACBWIEN. */ +#define BS_DAC_C0_DACBWIEN (1U) /*!< Bit field size in bits for DAC_C0_DACBWIEN. */ + +/*! @brief Read current value of the DAC_C0_DACBWIEN field. */ +#define BR_DAC_C0_DACBWIEN(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBWIEN)) + +/*! @brief Format value for bitfield DAC_C0_DACBWIEN. */ +#define BF_DAC_C0_DACBWIEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACBWIEN) & BM_DAC_C0_DACBWIEN) + +/*! @brief Set the DACBWIEN field to a new value. */ +#define BW_DAC_C0_DACBWIEN(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACBWIEN) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field LPEN[3] (RW) + * + * See the 12-bit DAC electrical characteristics of the device data sheet for + * details on the impact of the modes below. + * + * Values: + * - 0 - High-Power mode + * - 1 - Low-Power mode + */ +/*@{*/ +#define BP_DAC_C0_LPEN (3U) /*!< Bit position for DAC_C0_LPEN. */ +#define BM_DAC_C0_LPEN (0x08U) /*!< Bit mask for DAC_C0_LPEN. */ +#define BS_DAC_C0_LPEN (1U) /*!< Bit field size in bits for DAC_C0_LPEN. */ + +/*! @brief Read current value of the DAC_C0_LPEN field. */ +#define BR_DAC_C0_LPEN(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_LPEN)) + +/*! @brief Format value for bitfield DAC_C0_LPEN. */ +#define BF_DAC_C0_LPEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_LPEN) & BM_DAC_C0_LPEN) + +/*! @brief Set the LPEN field to a new value. */ +#define BW_DAC_C0_LPEN(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_LPEN) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACSWTRG[4] (WORZ) + * + * Active high. This is a write-only field, which always reads 0. If DAC + * software trigger is selected and buffer is enabled, writing 1 to this field will + * advance the buffer read pointer once. + * + * Values: + * - 0 - The DAC soft trigger is not valid. + * - 1 - The DAC soft trigger is valid. + */ +/*@{*/ +#define BP_DAC_C0_DACSWTRG (4U) /*!< Bit position for DAC_C0_DACSWTRG. */ +#define BM_DAC_C0_DACSWTRG (0x10U) /*!< Bit mask for DAC_C0_DACSWTRG. */ +#define BS_DAC_C0_DACSWTRG (1U) /*!< Bit field size in bits for DAC_C0_DACSWTRG. */ + +/*! @brief Format value for bitfield DAC_C0_DACSWTRG. */ +#define BF_DAC_C0_DACSWTRG(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACSWTRG) & BM_DAC_C0_DACSWTRG) + +/*! @brief Set the DACSWTRG field to a new value. */ +#define BW_DAC_C0_DACSWTRG(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACSWTRG) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACTRGSEL[5] (RW) + * + * Values: + * - 0 - The DAC hardware trigger is selected. + * - 1 - The DAC software trigger is selected. + */ +/*@{*/ +#define BP_DAC_C0_DACTRGSEL (5U) /*!< Bit position for DAC_C0_DACTRGSEL. */ +#define BM_DAC_C0_DACTRGSEL (0x20U) /*!< Bit mask for DAC_C0_DACTRGSEL. */ +#define BS_DAC_C0_DACTRGSEL (1U) /*!< Bit field size in bits for DAC_C0_DACTRGSEL. */ + +/*! @brief Read current value of the DAC_C0_DACTRGSEL field. */ +#define BR_DAC_C0_DACTRGSEL(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACTRGSEL)) + +/*! @brief Format value for bitfield DAC_C0_DACTRGSEL. */ +#define BF_DAC_C0_DACTRGSEL(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACTRGSEL) & BM_DAC_C0_DACTRGSEL) + +/*! @brief Set the DACTRGSEL field to a new value. */ +#define BW_DAC_C0_DACTRGSEL(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACTRGSEL) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACRFS[6] (RW) + * + * Values: + * - 0 - The DAC selects DACREF_1 as the reference voltage. + * - 1 - The DAC selects DACREF_2 as the reference voltage. + */ +/*@{*/ +#define BP_DAC_C0_DACRFS (6U) /*!< Bit position for DAC_C0_DACRFS. */ +#define BM_DAC_C0_DACRFS (0x40U) /*!< Bit mask for DAC_C0_DACRFS. */ +#define BS_DAC_C0_DACRFS (1U) /*!< Bit field size in bits for DAC_C0_DACRFS. */ + +/*! @brief Read current value of the DAC_C0_DACRFS field. */ +#define BR_DAC_C0_DACRFS(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACRFS)) + +/*! @brief Format value for bitfield DAC_C0_DACRFS. */ +#define BF_DAC_C0_DACRFS(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACRFS) & BM_DAC_C0_DACRFS) + +/*! @brief Set the DACRFS field to a new value. */ +#define BW_DAC_C0_DACRFS(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACRFS) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C0, field DACEN[7] (RW) + * + * Starts the Programmable Reference Generator operation. + * + * Values: + * - 0 - The DAC system is disabled. + * - 1 - The DAC system is enabled. + */ +/*@{*/ +#define BP_DAC_C0_DACEN (7U) /*!< Bit position for DAC_C0_DACEN. */ +#define BM_DAC_C0_DACEN (0x80U) /*!< Bit mask for DAC_C0_DACEN. */ +#define BS_DAC_C0_DACEN (1U) /*!< Bit field size in bits for DAC_C0_DACEN. */ + +/*! @brief Read current value of the DAC_C0_DACEN field. */ +#define BR_DAC_C0_DACEN(x) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACEN)) + +/*! @brief Format value for bitfield DAC_C0_DACEN. */ +#define BF_DAC_C0_DACEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C0_DACEN) & BM_DAC_C0_DACEN) + +/*! @brief Set the DACEN field to a new value. */ +#define BW_DAC_C0_DACEN(x, v) (BITBAND_ACCESS8(HW_DAC_C0_ADDR(x), BP_DAC_C0_DACEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DAC_C1 - DAC Control Register 1 + ******************************************************************************/ + +/*! + * @brief HW_DAC_C1 - DAC Control Register 1 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_dac_c1 +{ + uint8_t U; + struct _hw_dac_c1_bitfields + { + uint8_t DACBFEN : 1; /*!< [0] DAC Buffer Enable */ + uint8_t DACBFMD : 2; /*!< [2:1] DAC Buffer Work Mode Select */ + uint8_t DACBFWM : 2; /*!< [4:3] DAC Buffer Watermark Select */ + uint8_t RESERVED0 : 2; /*!< [6:5] */ + uint8_t DMAEN : 1; /*!< [7] DMA Enable Select */ + } B; +} hw_dac_c1_t; + +/*! + * @name Constants and macros for entire DAC_C1 register + */ +/*@{*/ +#define HW_DAC_C1_ADDR(x) ((x) + 0x22U) + +#define HW_DAC_C1(x) (*(__IO hw_dac_c1_t *) HW_DAC_C1_ADDR(x)) +#define HW_DAC_C1_RD(x) (HW_DAC_C1(x).U) +#define HW_DAC_C1_WR(x, v) (HW_DAC_C1(x).U = (v)) +#define HW_DAC_C1_SET(x, v) (HW_DAC_C1_WR(x, HW_DAC_C1_RD(x) | (v))) +#define HW_DAC_C1_CLR(x, v) (HW_DAC_C1_WR(x, HW_DAC_C1_RD(x) & ~(v))) +#define HW_DAC_C1_TOG(x, v) (HW_DAC_C1_WR(x, HW_DAC_C1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_C1 bitfields + */ + +/*! + * @name Register DAC_C1, field DACBFEN[0] (RW) + * + * Values: + * - 0 - Buffer read pointer is disabled. The converted data is always the first + * word of the buffer. + * - 1 - Buffer read pointer is enabled. The converted data is the word that the + * read pointer points to. It means converted data can be from any word of + * the buffer. + */ +/*@{*/ +#define BP_DAC_C1_DACBFEN (0U) /*!< Bit position for DAC_C1_DACBFEN. */ +#define BM_DAC_C1_DACBFEN (0x01U) /*!< Bit mask for DAC_C1_DACBFEN. */ +#define BS_DAC_C1_DACBFEN (1U) /*!< Bit field size in bits for DAC_C1_DACBFEN. */ + +/*! @brief Read current value of the DAC_C1_DACBFEN field. */ +#define BR_DAC_C1_DACBFEN(x) (BITBAND_ACCESS8(HW_DAC_C1_ADDR(x), BP_DAC_C1_DACBFEN)) + +/*! @brief Format value for bitfield DAC_C1_DACBFEN. */ +#define BF_DAC_C1_DACBFEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C1_DACBFEN) & BM_DAC_C1_DACBFEN) + +/*! @brief Set the DACBFEN field to a new value. */ +#define BW_DAC_C1_DACBFEN(x, v) (BITBAND_ACCESS8(HW_DAC_C1_ADDR(x), BP_DAC_C1_DACBFEN) = (v)) +/*@}*/ + +/*! + * @name Register DAC_C1, field DACBFMD[2:1] (RW) + * + * Values: + * - 00 - Normal mode + * - 01 - Swing mode + * - 10 - One-Time Scan mode + * - 11 - FIFO mode + */ +/*@{*/ +#define BP_DAC_C1_DACBFMD (1U) /*!< Bit position for DAC_C1_DACBFMD. */ +#define BM_DAC_C1_DACBFMD (0x06U) /*!< Bit mask for DAC_C1_DACBFMD. */ +#define BS_DAC_C1_DACBFMD (2U) /*!< Bit field size in bits for DAC_C1_DACBFMD. */ + +/*! @brief Read current value of the DAC_C1_DACBFMD field. */ +#define BR_DAC_C1_DACBFMD(x) (HW_DAC_C1(x).B.DACBFMD) + +/*! @brief Format value for bitfield DAC_C1_DACBFMD. */ +#define BF_DAC_C1_DACBFMD(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C1_DACBFMD) & BM_DAC_C1_DACBFMD) + +/*! @brief Set the DACBFMD field to a new value. */ +#define BW_DAC_C1_DACBFMD(x, v) (HW_DAC_C1_WR(x, (HW_DAC_C1_RD(x) & ~BM_DAC_C1_DACBFMD) | BF_DAC_C1_DACBFMD(v))) +/*@}*/ + +/*! + * @name Register DAC_C1, field DACBFWM[4:3] (RW) + * + * In normal mode it controls when SR[DACBFWMF] is set. When the DAC buffer read + * pointer reaches the word defined by this field, which is 1-4 words away from + * the upper limit (DACBUP), SR[DACBFWMF] will be set. This allows user + * configuration of the watermark interrupt. In FIFO mode, it is FIFO watermark select + * field. + * + * Values: + * - 00 - In normal mode, 1 word . In FIFO mode, 2 or less than 2 data remaining + * in FIFO will set watermark status bit. + * - 01 - In normal mode, 2 words . In FIFO mode, Max/4 or less than Max/4 data + * remaining in FIFO will set watermark status bit. + * - 10 - In normal mode, 3 words . In FIFO mode, Max/2 or less than Max/2 data + * remaining in FIFO will set watermark status bit. + * - 11 - In normal mode, 4 words . In FIFO mode, Max-2 or less than Max-2 data + * remaining in FIFO will set watermark status bit. + */ +/*@{*/ +#define BP_DAC_C1_DACBFWM (3U) /*!< Bit position for DAC_C1_DACBFWM. */ +#define BM_DAC_C1_DACBFWM (0x18U) /*!< Bit mask for DAC_C1_DACBFWM. */ +#define BS_DAC_C1_DACBFWM (2U) /*!< Bit field size in bits for DAC_C1_DACBFWM. */ + +/*! @brief Read current value of the DAC_C1_DACBFWM field. */ +#define BR_DAC_C1_DACBFWM(x) (HW_DAC_C1(x).B.DACBFWM) + +/*! @brief Format value for bitfield DAC_C1_DACBFWM. */ +#define BF_DAC_C1_DACBFWM(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C1_DACBFWM) & BM_DAC_C1_DACBFWM) + +/*! @brief Set the DACBFWM field to a new value. */ +#define BW_DAC_C1_DACBFWM(x, v) (HW_DAC_C1_WR(x, (HW_DAC_C1_RD(x) & ~BM_DAC_C1_DACBFWM) | BF_DAC_C1_DACBFWM(v))) +/*@}*/ + +/*! + * @name Register DAC_C1, field DMAEN[7] (RW) + * + * Values: + * - 0 - DMA is disabled. + * - 1 - DMA is enabled. When DMA is enabled, the DMA request will be generated + * by original interrupts. The interrupts will not be presented on this + * module at the same time. + */ +/*@{*/ +#define BP_DAC_C1_DMAEN (7U) /*!< Bit position for DAC_C1_DMAEN. */ +#define BM_DAC_C1_DMAEN (0x80U) /*!< Bit mask for DAC_C1_DMAEN. */ +#define BS_DAC_C1_DMAEN (1U) /*!< Bit field size in bits for DAC_C1_DMAEN. */ + +/*! @brief Read current value of the DAC_C1_DMAEN field. */ +#define BR_DAC_C1_DMAEN(x) (BITBAND_ACCESS8(HW_DAC_C1_ADDR(x), BP_DAC_C1_DMAEN)) + +/*! @brief Format value for bitfield DAC_C1_DMAEN. */ +#define BF_DAC_C1_DMAEN(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C1_DMAEN) & BM_DAC_C1_DMAEN) + +/*! @brief Set the DMAEN field to a new value. */ +#define BW_DAC_C1_DMAEN(x, v) (BITBAND_ACCESS8(HW_DAC_C1_ADDR(x), BP_DAC_C1_DMAEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DAC_C2 - DAC Control Register 2 + ******************************************************************************/ + +/*! + * @brief HW_DAC_C2 - DAC Control Register 2 (RW) + * + * Reset value: 0x0FU + */ +typedef union _hw_dac_c2 +{ + uint8_t U; + struct _hw_dac_c2_bitfields + { + uint8_t DACBFUP : 4; /*!< [3:0] DAC Buffer Upper Limit */ + uint8_t DACBFRP : 4; /*!< [7:4] DAC Buffer Read Pointer */ + } B; +} hw_dac_c2_t; + +/*! + * @name Constants and macros for entire DAC_C2 register + */ +/*@{*/ +#define HW_DAC_C2_ADDR(x) ((x) + 0x23U) + +#define HW_DAC_C2(x) (*(__IO hw_dac_c2_t *) HW_DAC_C2_ADDR(x)) +#define HW_DAC_C2_RD(x) (HW_DAC_C2(x).U) +#define HW_DAC_C2_WR(x, v) (HW_DAC_C2(x).U = (v)) +#define HW_DAC_C2_SET(x, v) (HW_DAC_C2_WR(x, HW_DAC_C2_RD(x) | (v))) +#define HW_DAC_C2_CLR(x, v) (HW_DAC_C2_WR(x, HW_DAC_C2_RD(x) & ~(v))) +#define HW_DAC_C2_TOG(x, v) (HW_DAC_C2_WR(x, HW_DAC_C2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DAC_C2 bitfields + */ + +/*! + * @name Register DAC_C2, field DACBFUP[3:0] (RW) + * + * In normal mode it selects the upper limit of the DAC buffer. The buffer read + * pointer cannot exceed it. In FIFO mode it is the FIFO write pointer. User + * cannot set Buffer Up limit in FIFO mode. In Normal mode its reset value is MAX. + * When IP is configured to FIFO mode, this register becomes Write_Pointer, and its + * value is initially set to equal READ_POINTER automatically, and the FIFO + * status is empty. It is writable and user can configure it to the same address to + * reset FIFO as empty. + */ +/*@{*/ +#define BP_DAC_C2_DACBFUP (0U) /*!< Bit position for DAC_C2_DACBFUP. */ +#define BM_DAC_C2_DACBFUP (0x0FU) /*!< Bit mask for DAC_C2_DACBFUP. */ +#define BS_DAC_C2_DACBFUP (4U) /*!< Bit field size in bits for DAC_C2_DACBFUP. */ + +/*! @brief Read current value of the DAC_C2_DACBFUP field. */ +#define BR_DAC_C2_DACBFUP(x) (HW_DAC_C2(x).B.DACBFUP) + +/*! @brief Format value for bitfield DAC_C2_DACBFUP. */ +#define BF_DAC_C2_DACBFUP(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C2_DACBFUP) & BM_DAC_C2_DACBFUP) + +/*! @brief Set the DACBFUP field to a new value. */ +#define BW_DAC_C2_DACBFUP(x, v) (HW_DAC_C2_WR(x, (HW_DAC_C2_RD(x) & ~BM_DAC_C2_DACBFUP) | BF_DAC_C2_DACBFUP(v))) +/*@}*/ + +/*! + * @name Register DAC_C2, field DACBFRP[7:4] (RW) + * + * In normal mode it keeps the current value of the buffer read pointer. FIFO + * mode, it is the FIFO read pointer. It is writable in FIFO mode. User can + * configure it to same address to reset FIFO as empty. + */ +/*@{*/ +#define BP_DAC_C2_DACBFRP (4U) /*!< Bit position for DAC_C2_DACBFRP. */ +#define BM_DAC_C2_DACBFRP (0xF0U) /*!< Bit mask for DAC_C2_DACBFRP. */ +#define BS_DAC_C2_DACBFRP (4U) /*!< Bit field size in bits for DAC_C2_DACBFRP. */ + +/*! @brief Read current value of the DAC_C2_DACBFRP field. */ +#define BR_DAC_C2_DACBFRP(x) (HW_DAC_C2(x).B.DACBFRP) + +/*! @brief Format value for bitfield DAC_C2_DACBFRP. */ +#define BF_DAC_C2_DACBFRP(v) ((uint8_t)((uint8_t)(v) << BP_DAC_C2_DACBFRP) & BM_DAC_C2_DACBFRP) + +/*! @brief Set the DACBFRP field to a new value. */ +#define BW_DAC_C2_DACBFRP(x, v) (HW_DAC_C2_WR(x, (HW_DAC_C2_RD(x) & ~BM_DAC_C2_DACBFRP) | BF_DAC_C2_DACBFRP(v))) +/*@}*/ + +/******************************************************************************* + * hw_dac_t - module struct + ******************************************************************************/ +/*! + * @brief All DAC module registers. + */ +#pragma pack(1) +typedef struct _hw_dac +{ + struct { + __IO hw_dac_datnl_t DATnL; /*!< [0x0] DAC Data Low Register */ + __IO hw_dac_datnh_t DATnH; /*!< [0x1] DAC Data High Register */ + } DAT[16]; + __IO hw_dac_sr_t SR; /*!< [0x20] DAC Status Register */ + __IO hw_dac_c0_t C0; /*!< [0x21] DAC Control Register */ + __IO hw_dac_c1_t C1; /*!< [0x22] DAC Control Register 1 */ + __IO hw_dac_c2_t C2; /*!< [0x23] DAC Control Register 2 */ +} hw_dac_t; +#pragma pack() + +/*! @brief Macro to access all DAC registers. */ +/*! @param x DAC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_DAC(DAC0_BASE)</code>. */ +#define HW_DAC(x) (*(hw_dac_t *)(x)) + +#endif /* __HW_DAC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dma.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dma.h new file mode 100644 index 0000000000..689ef60329 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dma.h @@ -0,0 +1,5785 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_DMA_REGISTERS_H__ +#define __HW_DMA_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 DMA + * + * Enhanced direct memory access controller + * + * Registers defined in this header file: + * - HW_DMA_CR - Control Register + * - HW_DMA_ES - Error Status Register + * - HW_DMA_ERQ - Enable Request Register + * - HW_DMA_EEI - Enable Error Interrupt Register + * - HW_DMA_CEEI - Clear Enable Error Interrupt Register + * - HW_DMA_SEEI - Set Enable Error Interrupt Register + * - HW_DMA_CERQ - Clear Enable Request Register + * - HW_DMA_SERQ - Set Enable Request Register + * - HW_DMA_CDNE - Clear DONE Status Bit Register + * - HW_DMA_SSRT - Set START Bit Register + * - HW_DMA_CERR - Clear Error Register + * - HW_DMA_CINT - Clear Interrupt Request Register + * - HW_DMA_INT - Interrupt Request Register + * - HW_DMA_ERR - Error Register + * - HW_DMA_HRS - Hardware Request Status Register + * - HW_DMA_EARS - Enable Asynchronous Request in Stop Register + * - HW_DMA_DCHPRIn - Channel n Priority Register + * - HW_DMA_TCDn_SADDR - TCD Source Address + * - HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset + * - HW_DMA_TCDn_ATTR - TCD Transfer Attributes + * - HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) + * - HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) + * - HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) + * - HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment + * - HW_DMA_TCDn_DADDR - TCD Destination Address + * - HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset + * - HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) + * - HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) + * - HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address + * - HW_DMA_TCDn_CSR - TCD Control and Status + * - HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) + * - HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) + * + * - hw_dma_t - Struct containing all module registers. + */ + +#define HW_DMA_INSTANCE_COUNT (1U) /*!< Number of instances of the DMA module. */ + +/******************************************************************************* + * HW_DMA_CR - Control Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CR - Control Register (RW) + * + * Reset value: 0x00000000U + * + * The CR defines the basic operating configuration of the DMA. Arbitration can + * be configured to use either a fixed-priority or a round-robin scheme. For + * fixed-priority arbitration, the highest priority channel requesting service is + * selected to execute. The channel priority registers assign the priorities; see + * the DCHPRIn registers. For round-robin arbitration, the channel priorities are + * ignored and channels are cycled through (from high to low channel number) + * without regard to priority. For proper operation, writes to the CR register must be + * performed only when the DMA channels are inactive; that is, when + * TCDn_CSR[ACTIVE] bits are cleared. Minor loop offsets are address offset values added to + * the final source address (TCDn_SADDR) or destination address (TCDn_DADDR) upon + * minor loop completion. When minor loop offsets are enabled, the minor loop + * offset (MLOFF) is added to the final source address (TCDn_SADDR), to the final + * destination address (TCDn_DADDR), or to both prior to the addresses being + * written back into the TCD. If the major loop is complete, the minor loop offset is + * ignored and the major loop address offsets (TCDn_SLAST and TCDn_DLAST_SGA) are + * used to compute the next TCDn_SADDR and TCDn_DADDR values. When minor loop + * mapping is enabled (EMLM is 1), TCDn word2 is redefined. A portion of TCDn word2 + * is used to specify multiple fields: a source enable bit (SMLOE) to specify the + * minor loop offset should be applied to the source address (TCDn_SADDR) upon + * minor loop completion, a destination enable bit (DMLOE) to specify the minor + * loop offset should be applied to the destination address (TCDn_DADDR) upon minor + * loop completion, and the sign extended minor loop offset value (MLOFF). The + * same offset value (MLOFF) is used for both source and destination minor loop + * offsets. When either minor loop offset is enabled (SMLOE set or DMLOE set), the + * NBYTES field is reduced to 10 bits. When both minor loop offsets are disabled + * (SMLOE cleared and DMLOE cleared), the NBYTES field is a 30-bit vector. When + * minor loop mapping is disabled (EMLM is 0), all 32 bits of TCDn word2 are + * assigned to the NBYTES field. + */ +typedef union _hw_dma_cr +{ + uint32_t U; + struct _hw_dma_cr_bitfields + { + uint32_t RESERVED0 : 1; /*!< [0] Reserved. */ + uint32_t EDBG : 1; /*!< [1] Enable Debug */ + uint32_t ERCA : 1; /*!< [2] Enable Round Robin Channel Arbitration */ + uint32_t RESERVED1 : 1; /*!< [3] Reserved. */ + uint32_t HOE : 1; /*!< [4] Halt On Error */ + uint32_t HALT : 1; /*!< [5] Halt DMA Operations */ + uint32_t CLM : 1; /*!< [6] Continuous Link Mode */ + uint32_t EMLM : 1; /*!< [7] Enable Minor Loop Mapping */ + uint32_t RESERVED2 : 8; /*!< [15:8] */ + uint32_t ECX : 1; /*!< [16] Error Cancel Transfer */ + uint32_t CX : 1; /*!< [17] Cancel Transfer */ + uint32_t RESERVED3 : 14; /*!< [31:18] */ + } B; +} hw_dma_cr_t; + +/*! + * @name Constants and macros for entire DMA_CR register + */ +/*@{*/ +#define HW_DMA_CR_ADDR(x) ((x) + 0x0U) + +#define HW_DMA_CR(x) (*(__IO hw_dma_cr_t *) HW_DMA_CR_ADDR(x)) +#define HW_DMA_CR_RD(x) (HW_DMA_CR(x).U) +#define HW_DMA_CR_WR(x, v) (HW_DMA_CR(x).U = (v)) +#define HW_DMA_CR_SET(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) | (v))) +#define HW_DMA_CR_CLR(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) & ~(v))) +#define HW_DMA_CR_TOG(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_CR bitfields + */ + +/*! + * @name Register DMA_CR, field EDBG[1] (RW) + * + * Values: + * - 0 - When in debug mode, the DMA continues to operate. + * - 1 - When in debug mode, the DMA stalls the start of a new channel. + * Executing channels are allowed to complete. Channel execution resumes when the + * system exits debug mode or the EDBG bit is cleared. + */ +/*@{*/ +#define BP_DMA_CR_EDBG (1U) /*!< Bit position for DMA_CR_EDBG. */ +#define BM_DMA_CR_EDBG (0x00000002U) /*!< Bit mask for DMA_CR_EDBG. */ +#define BS_DMA_CR_EDBG (1U) /*!< Bit field size in bits for DMA_CR_EDBG. */ + +/*! @brief Read current value of the DMA_CR_EDBG field. */ +#define BR_DMA_CR_EDBG(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG)) + +/*! @brief Format value for bitfield DMA_CR_EDBG. */ +#define BF_DMA_CR_EDBG(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_EDBG) & BM_DMA_CR_EDBG) + +/*! @brief Set the EDBG field to a new value. */ +#define BW_DMA_CR_EDBG(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field ERCA[2] (RW) + * + * Values: + * - 0 - Fixed priority arbitration is used for channel selection . + * - 1 - Round robin arbitration is used for channel selection . + */ +/*@{*/ +#define BP_DMA_CR_ERCA (2U) /*!< Bit position for DMA_CR_ERCA. */ +#define BM_DMA_CR_ERCA (0x00000004U) /*!< Bit mask for DMA_CR_ERCA. */ +#define BS_DMA_CR_ERCA (1U) /*!< Bit field size in bits for DMA_CR_ERCA. */ + +/*! @brief Read current value of the DMA_CR_ERCA field. */ +#define BR_DMA_CR_ERCA(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA)) + +/*! @brief Format value for bitfield DMA_CR_ERCA. */ +#define BF_DMA_CR_ERCA(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_ERCA) & BM_DMA_CR_ERCA) + +/*! @brief Set the ERCA field to a new value. */ +#define BW_DMA_CR_ERCA(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field HOE[4] (RW) + * + * Values: + * - 0 - Normal operation + * - 1 - Any error causes the HALT bit to set. Subsequently, all service + * requests are ignored until the HALT bit is cleared. + */ +/*@{*/ +#define BP_DMA_CR_HOE (4U) /*!< Bit position for DMA_CR_HOE. */ +#define BM_DMA_CR_HOE (0x00000010U) /*!< Bit mask for DMA_CR_HOE. */ +#define BS_DMA_CR_HOE (1U) /*!< Bit field size in bits for DMA_CR_HOE. */ + +/*! @brief Read current value of the DMA_CR_HOE field. */ +#define BR_DMA_CR_HOE(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE)) + +/*! @brief Format value for bitfield DMA_CR_HOE. */ +#define BF_DMA_CR_HOE(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_HOE) & BM_DMA_CR_HOE) + +/*! @brief Set the HOE field to a new value. */ +#define BW_DMA_CR_HOE(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field HALT[5] (RW) + * + * Values: + * - 0 - Normal operation + * - 1 - Stall the start of any new channels. Executing channels are allowed to + * complete. Channel execution resumes when this bit is cleared. + */ +/*@{*/ +#define BP_DMA_CR_HALT (5U) /*!< Bit position for DMA_CR_HALT. */ +#define BM_DMA_CR_HALT (0x00000020U) /*!< Bit mask for DMA_CR_HALT. */ +#define BS_DMA_CR_HALT (1U) /*!< Bit field size in bits for DMA_CR_HALT. */ + +/*! @brief Read current value of the DMA_CR_HALT field. */ +#define BR_DMA_CR_HALT(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT)) + +/*! @brief Format value for bitfield DMA_CR_HALT. */ +#define BF_DMA_CR_HALT(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_HALT) & BM_DMA_CR_HALT) + +/*! @brief Set the HALT field to a new value. */ +#define BW_DMA_CR_HALT(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field CLM[6] (RW) + * + * Values: + * - 0 - A minor loop channel link made to itself goes through channel + * arbitration before being activated again. + * - 1 - A minor loop channel link made to itself does not go through channel + * arbitration before being activated again. Upon minor loop completion, the + * channel activates again if that channel has a minor loop channel link + * enabled and the link channel is itself. This effectively applies the minor loop + * offsets and restarts the next minor loop. + */ +/*@{*/ +#define BP_DMA_CR_CLM (6U) /*!< Bit position for DMA_CR_CLM. */ +#define BM_DMA_CR_CLM (0x00000040U) /*!< Bit mask for DMA_CR_CLM. */ +#define BS_DMA_CR_CLM (1U) /*!< Bit field size in bits for DMA_CR_CLM. */ + +/*! @brief Read current value of the DMA_CR_CLM field. */ +#define BR_DMA_CR_CLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM)) + +/*! @brief Format value for bitfield DMA_CR_CLM. */ +#define BF_DMA_CR_CLM(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_CLM) & BM_DMA_CR_CLM) + +/*! @brief Set the CLM field to a new value. */ +#define BW_DMA_CR_CLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field EMLM[7] (RW) + * + * Values: + * - 0 - Disabled. TCDn.word2 is defined as a 32-bit NBYTES field. + * - 1 - Enabled. TCDn.word2 is redefined to include individual enable fields, + * an offset field, and the NBYTES field. The individual enable fields allow + * the minor loop offset to be applied to the source address, the destination + * address, or both. The NBYTES field is reduced when either offset is + * enabled. + */ +/*@{*/ +#define BP_DMA_CR_EMLM (7U) /*!< Bit position for DMA_CR_EMLM. */ +#define BM_DMA_CR_EMLM (0x00000080U) /*!< Bit mask for DMA_CR_EMLM. */ +#define BS_DMA_CR_EMLM (1U) /*!< Bit field size in bits for DMA_CR_EMLM. */ + +/*! @brief Read current value of the DMA_CR_EMLM field. */ +#define BR_DMA_CR_EMLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM)) + +/*! @brief Format value for bitfield DMA_CR_EMLM. */ +#define BF_DMA_CR_EMLM(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_EMLM) & BM_DMA_CR_EMLM) + +/*! @brief Set the EMLM field to a new value. */ +#define BW_DMA_CR_EMLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field ECX[16] (RW) + * + * Values: + * - 0 - Normal operation + * - 1 - Cancel the remaining data transfer in the same fashion as the CX bit. + * Stop the executing channel and force the minor loop to finish. The cancel + * takes effect after the last write of the current read/write sequence. The + * ECX bit clears itself after the cancel is honored. In addition to + * cancelling the transfer, ECX treats the cancel as an error condition, thus updating + * the Error Status register (DMAx_ES) and generating an optional error + * interrupt. + */ +/*@{*/ +#define BP_DMA_CR_ECX (16U) /*!< Bit position for DMA_CR_ECX. */ +#define BM_DMA_CR_ECX (0x00010000U) /*!< Bit mask for DMA_CR_ECX. */ +#define BS_DMA_CR_ECX (1U) /*!< Bit field size in bits for DMA_CR_ECX. */ + +/*! @brief Read current value of the DMA_CR_ECX field. */ +#define BR_DMA_CR_ECX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX)) + +/*! @brief Format value for bitfield DMA_CR_ECX. */ +#define BF_DMA_CR_ECX(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_ECX) & BM_DMA_CR_ECX) + +/*! @brief Set the ECX field to a new value. */ +#define BW_DMA_CR_ECX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CR, field CX[17] (RW) + * + * Values: + * - 0 - Normal operation + * - 1 - Cancel the remaining data transfer. Stop the executing channel and + * force the minor loop to finish. The cancel takes effect after the last write + * of the current read/write sequence. The CX bit clears itself after the + * cancel has been honored. This cancel retires the channel normally as if the + * minor loop was completed. + */ +/*@{*/ +#define BP_DMA_CR_CX (17U) /*!< Bit position for DMA_CR_CX. */ +#define BM_DMA_CR_CX (0x00020000U) /*!< Bit mask for DMA_CR_CX. */ +#define BS_DMA_CR_CX (1U) /*!< Bit field size in bits for DMA_CR_CX. */ + +/*! @brief Read current value of the DMA_CR_CX field. */ +#define BR_DMA_CR_CX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX)) + +/*! @brief Format value for bitfield DMA_CR_CX. */ +#define BF_DMA_CR_CX(v) ((uint32_t)((uint32_t)(v) << BP_DMA_CR_CX) & BM_DMA_CR_CX) + +/*! @brief Set the CX field to a new value. */ +#define BW_DMA_CR_CX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_ES - Error Status Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_ES - Error Status Register (RO) + * + * Reset value: 0x00000000U + * + * The ES provides information concerning the last recorded channel error. + * Channel errors can be caused by: A configuration error, that is: An illegal setting + * in the transfer-control descriptor, or An illegal priority register setting + * in fixed-arbitration An error termination to a bus master read or write cycle + * See the Error Reporting and Handling section for more details. + */ +typedef union _hw_dma_es +{ + uint32_t U; + struct _hw_dma_es_bitfields + { + uint32_t DBE : 1; /*!< [0] Destination Bus Error */ + uint32_t SBE : 1; /*!< [1] Source Bus Error */ + uint32_t SGE : 1; /*!< [2] Scatter/Gather Configuration Error */ + uint32_t NCE : 1; /*!< [3] NBYTES/CITER Configuration Error */ + uint32_t DOE : 1; /*!< [4] Destination Offset Error */ + uint32_t DAE : 1; /*!< [5] Destination Address Error */ + uint32_t SOE : 1; /*!< [6] Source Offset Error */ + uint32_t SAE : 1; /*!< [7] Source Address Error */ + uint32_t ERRCHN : 4; /*!< [11:8] Error Channel Number or Canceled + * Channel Number */ + uint32_t RESERVED0 : 2; /*!< [13:12] */ + uint32_t CPE : 1; /*!< [14] Channel Priority Error */ + uint32_t RESERVED1 : 1; /*!< [15] */ + uint32_t ECX : 1; /*!< [16] Transfer Canceled */ + uint32_t RESERVED2 : 14; /*!< [30:17] */ + uint32_t VLD : 1; /*!< [31] */ + } B; +} hw_dma_es_t; + +/*! + * @name Constants and macros for entire DMA_ES register + */ +/*@{*/ +#define HW_DMA_ES_ADDR(x) ((x) + 0x4U) + +#define HW_DMA_ES(x) (*(__I hw_dma_es_t *) HW_DMA_ES_ADDR(x)) +#define HW_DMA_ES_RD(x) (HW_DMA_ES(x).U) +/*@}*/ + +/* + * Constants & macros for individual DMA_ES bitfields + */ + +/*! + * @name Register DMA_ES, field DBE[0] (RO) + * + * Values: + * - 0 - No destination bus error + * - 1 - The last recorded error was a bus error on a destination write + */ +/*@{*/ +#define BP_DMA_ES_DBE (0U) /*!< Bit position for DMA_ES_DBE. */ +#define BM_DMA_ES_DBE (0x00000001U) /*!< Bit mask for DMA_ES_DBE. */ +#define BS_DMA_ES_DBE (1U) /*!< Bit field size in bits for DMA_ES_DBE. */ + +/*! @brief Read current value of the DMA_ES_DBE field. */ +#define BR_DMA_ES_DBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DBE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field SBE[1] (RO) + * + * Values: + * - 0 - No source bus error + * - 1 - The last recorded error was a bus error on a source read + */ +/*@{*/ +#define BP_DMA_ES_SBE (1U) /*!< Bit position for DMA_ES_SBE. */ +#define BM_DMA_ES_SBE (0x00000002U) /*!< Bit mask for DMA_ES_SBE. */ +#define BS_DMA_ES_SBE (1U) /*!< Bit field size in bits for DMA_ES_SBE. */ + +/*! @brief Read current value of the DMA_ES_SBE field. */ +#define BR_DMA_ES_SBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SBE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field SGE[2] (RO) + * + * Values: + * - 0 - No scatter/gather configuration error + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_DLASTSGA field. This field is checked at the beginning of a scatter/gather + * operation after major loop completion if TCDn_CSR[ESG] is enabled. + * TCDn_DLASTSGA is not on a 32 byte boundary. + */ +/*@{*/ +#define BP_DMA_ES_SGE (2U) /*!< Bit position for DMA_ES_SGE. */ +#define BM_DMA_ES_SGE (0x00000004U) /*!< Bit mask for DMA_ES_SGE. */ +#define BS_DMA_ES_SGE (1U) /*!< Bit field size in bits for DMA_ES_SGE. */ + +/*! @brief Read current value of the DMA_ES_SGE field. */ +#define BR_DMA_ES_SGE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SGE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field NCE[3] (RO) + * + * Values: + * - 0 - No NBYTES/CITER configuration error + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_NBYTES or TCDn_CITER fields. TCDn_NBYTES is not a multiple of + * TCDn_ATTR[SSIZE] and TCDn_ATTR[DSIZE], or TCDn_CITER[CITER] is equal to zero, or + * TCDn_CITER[ELINK] is not equal to TCDn_BITER[ELINK] + */ +/*@{*/ +#define BP_DMA_ES_NCE (3U) /*!< Bit position for DMA_ES_NCE. */ +#define BM_DMA_ES_NCE (0x00000008U) /*!< Bit mask for DMA_ES_NCE. */ +#define BS_DMA_ES_NCE (1U) /*!< Bit field size in bits for DMA_ES_NCE. */ + +/*! @brief Read current value of the DMA_ES_NCE field. */ +#define BR_DMA_ES_NCE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_NCE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field DOE[4] (RO) + * + * Values: + * - 0 - No destination offset configuration error + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_DOFF field. TCDn_DOFF is inconsistent with TCDn_ATTR[DSIZE]. + */ +/*@{*/ +#define BP_DMA_ES_DOE (4U) /*!< Bit position for DMA_ES_DOE. */ +#define BM_DMA_ES_DOE (0x00000010U) /*!< Bit mask for DMA_ES_DOE. */ +#define BS_DMA_ES_DOE (1U) /*!< Bit field size in bits for DMA_ES_DOE. */ + +/*! @brief Read current value of the DMA_ES_DOE field. */ +#define BR_DMA_ES_DOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DOE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field DAE[5] (RO) + * + * Values: + * - 0 - No destination address configuration error + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_DADDR field. TCDn_DADDR is inconsistent with TCDn_ATTR[DSIZE]. + */ +/*@{*/ +#define BP_DMA_ES_DAE (5U) /*!< Bit position for DMA_ES_DAE. */ +#define BM_DMA_ES_DAE (0x00000020U) /*!< Bit mask for DMA_ES_DAE. */ +#define BS_DMA_ES_DAE (1U) /*!< Bit field size in bits for DMA_ES_DAE. */ + +/*! @brief Read current value of the DMA_ES_DAE field. */ +#define BR_DMA_ES_DAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DAE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field SOE[6] (RO) + * + * Values: + * - 0 - No source offset configuration error + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_SOFF field. TCDn_SOFF is inconsistent with TCDn_ATTR[SSIZE]. + */ +/*@{*/ +#define BP_DMA_ES_SOE (6U) /*!< Bit position for DMA_ES_SOE. */ +#define BM_DMA_ES_SOE (0x00000040U) /*!< Bit mask for DMA_ES_SOE. */ +#define BS_DMA_ES_SOE (1U) /*!< Bit field size in bits for DMA_ES_SOE. */ + +/*! @brief Read current value of the DMA_ES_SOE field. */ +#define BR_DMA_ES_SOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SOE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field SAE[7] (RO) + * + * Values: + * - 0 - No source address configuration error. + * - 1 - The last recorded error was a configuration error detected in the + * TCDn_SADDR field. TCDn_SADDR is inconsistent with TCDn_ATTR[SSIZE]. + */ +/*@{*/ +#define BP_DMA_ES_SAE (7U) /*!< Bit position for DMA_ES_SAE. */ +#define BM_DMA_ES_SAE (0x00000080U) /*!< Bit mask for DMA_ES_SAE. */ +#define BS_DMA_ES_SAE (1U) /*!< Bit field size in bits for DMA_ES_SAE. */ + +/*! @brief Read current value of the DMA_ES_SAE field. */ +#define BR_DMA_ES_SAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SAE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field ERRCHN[11:8] (RO) + * + * The channel number of the last recorded error (excluding CPE errors) or last + * recorded error canceled transfer. + */ +/*@{*/ +#define BP_DMA_ES_ERRCHN (8U) /*!< Bit position for DMA_ES_ERRCHN. */ +#define BM_DMA_ES_ERRCHN (0x00000F00U) /*!< Bit mask for DMA_ES_ERRCHN. */ +#define BS_DMA_ES_ERRCHN (4U) /*!< Bit field size in bits for DMA_ES_ERRCHN. */ + +/*! @brief Read current value of the DMA_ES_ERRCHN field. */ +#define BR_DMA_ES_ERRCHN(x) (HW_DMA_ES(x).B.ERRCHN) +/*@}*/ + +/*! + * @name Register DMA_ES, field CPE[14] (RO) + * + * Values: + * - 0 - No channel priority error + * - 1 - The last recorded error was a configuration error in the channel + * priorities . Channel priorities are not unique. + */ +/*@{*/ +#define BP_DMA_ES_CPE (14U) /*!< Bit position for DMA_ES_CPE. */ +#define BM_DMA_ES_CPE (0x00004000U) /*!< Bit mask for DMA_ES_CPE. */ +#define BS_DMA_ES_CPE (1U) /*!< Bit field size in bits for DMA_ES_CPE. */ + +/*! @brief Read current value of the DMA_ES_CPE field. */ +#define BR_DMA_ES_CPE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_CPE)) +/*@}*/ + +/*! + * @name Register DMA_ES, field ECX[16] (RO) + * + * Values: + * - 0 - No canceled transfers + * - 1 - The last recorded entry was a canceled transfer by the error cancel + * transfer input + */ +/*@{*/ +#define BP_DMA_ES_ECX (16U) /*!< Bit position for DMA_ES_ECX. */ +#define BM_DMA_ES_ECX (0x00010000U) /*!< Bit mask for DMA_ES_ECX. */ +#define BS_DMA_ES_ECX (1U) /*!< Bit field size in bits for DMA_ES_ECX. */ + +/*! @brief Read current value of the DMA_ES_ECX field. */ +#define BR_DMA_ES_ECX(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_ECX)) +/*@}*/ + +/*! + * @name Register DMA_ES, field VLD[31] (RO) + * + * Logical OR of all ERR status bits + * + * Values: + * - 0 - No ERR bits are set + * - 1 - At least one ERR bit is set indicating a valid error exists that has + * not been cleared + */ +/*@{*/ +#define BP_DMA_ES_VLD (31U) /*!< Bit position for DMA_ES_VLD. */ +#define BM_DMA_ES_VLD (0x80000000U) /*!< Bit mask for DMA_ES_VLD. */ +#define BS_DMA_ES_VLD (1U) /*!< Bit field size in bits for DMA_ES_VLD. */ + +/*! @brief Read current value of the DMA_ES_VLD field. */ +#define BR_DMA_ES_VLD(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_VLD)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_ERQ - Enable Request Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_ERQ - Enable Request Register (RW) + * + * Reset value: 0x00000000U + * + * The ERQ register provides a bit map for the 16 implemented channels to enable + * the request signal for each channel. The state of any given channel enable is + * directly affected by writes to this register; it is also affected by writes + * to the SERQ and CERQ. The {S,C}ERQ registers are provided so the request enable + * for a single channel can easily be modified without needing to perform a + * read-modify-write sequence to the ERQ. DMA request input signals and this enable + * request flag must be asserted before a channel's hardware service request is + * accepted. The state of the DMA enable request flag does not affect a channel + * service request made explicitly through software or a linked channel request. + */ +typedef union _hw_dma_erq +{ + uint32_t U; + struct _hw_dma_erq_bitfields + { + uint32_t ERQ0 : 1; /*!< [0] Enable DMA Request 0 */ + uint32_t ERQ1 : 1; /*!< [1] Enable DMA Request 1 */ + uint32_t ERQ2 : 1; /*!< [2] Enable DMA Request 2 */ + uint32_t ERQ3 : 1; /*!< [3] Enable DMA Request 3 */ + uint32_t ERQ4 : 1; /*!< [4] Enable DMA Request 4 */ + uint32_t ERQ5 : 1; /*!< [5] Enable DMA Request 5 */ + uint32_t ERQ6 : 1; /*!< [6] Enable DMA Request 6 */ + uint32_t ERQ7 : 1; /*!< [7] Enable DMA Request 7 */ + uint32_t ERQ8 : 1; /*!< [8] Enable DMA Request 8 */ + uint32_t ERQ9 : 1; /*!< [9] Enable DMA Request 9 */ + uint32_t ERQ10 : 1; /*!< [10] Enable DMA Request 10 */ + uint32_t ERQ11 : 1; /*!< [11] Enable DMA Request 11 */ + uint32_t ERQ12 : 1; /*!< [12] Enable DMA Request 12 */ + uint32_t ERQ13 : 1; /*!< [13] Enable DMA Request 13 */ + uint32_t ERQ14 : 1; /*!< [14] Enable DMA Request 14 */ + uint32_t ERQ15 : 1; /*!< [15] Enable DMA Request 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_dma_erq_t; + +/*! + * @name Constants and macros for entire DMA_ERQ register + */ +/*@{*/ +#define HW_DMA_ERQ_ADDR(x) ((x) + 0xCU) + +#define HW_DMA_ERQ(x) (*(__IO hw_dma_erq_t *) HW_DMA_ERQ_ADDR(x)) +#define HW_DMA_ERQ_RD(x) (HW_DMA_ERQ(x).U) +#define HW_DMA_ERQ_WR(x, v) (HW_DMA_ERQ(x).U = (v)) +#define HW_DMA_ERQ_SET(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) | (v))) +#define HW_DMA_ERQ_CLR(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) & ~(v))) +#define HW_DMA_ERQ_TOG(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_ERQ bitfields + */ + +/*! + * @name Register DMA_ERQ, field ERQ0[0] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ0 (0U) /*!< Bit position for DMA_ERQ_ERQ0. */ +#define BM_DMA_ERQ_ERQ0 (0x00000001U) /*!< Bit mask for DMA_ERQ_ERQ0. */ +#define BS_DMA_ERQ_ERQ0 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ0. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ0 field. */ +#define BR_DMA_ERQ_ERQ0(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ0. */ +#define BF_DMA_ERQ_ERQ0(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ0) & BM_DMA_ERQ_ERQ0) + +/*! @brief Set the ERQ0 field to a new value. */ +#define BW_DMA_ERQ_ERQ0(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ1[1] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ1 (1U) /*!< Bit position for DMA_ERQ_ERQ1. */ +#define BM_DMA_ERQ_ERQ1 (0x00000002U) /*!< Bit mask for DMA_ERQ_ERQ1. */ +#define BS_DMA_ERQ_ERQ1 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ1. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ1 field. */ +#define BR_DMA_ERQ_ERQ1(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ1. */ +#define BF_DMA_ERQ_ERQ1(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ1) & BM_DMA_ERQ_ERQ1) + +/*! @brief Set the ERQ1 field to a new value. */ +#define BW_DMA_ERQ_ERQ1(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ2[2] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ2 (2U) /*!< Bit position for DMA_ERQ_ERQ2. */ +#define BM_DMA_ERQ_ERQ2 (0x00000004U) /*!< Bit mask for DMA_ERQ_ERQ2. */ +#define BS_DMA_ERQ_ERQ2 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ2. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ2 field. */ +#define BR_DMA_ERQ_ERQ2(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ2. */ +#define BF_DMA_ERQ_ERQ2(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ2) & BM_DMA_ERQ_ERQ2) + +/*! @brief Set the ERQ2 field to a new value. */ +#define BW_DMA_ERQ_ERQ2(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ3[3] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ3 (3U) /*!< Bit position for DMA_ERQ_ERQ3. */ +#define BM_DMA_ERQ_ERQ3 (0x00000008U) /*!< Bit mask for DMA_ERQ_ERQ3. */ +#define BS_DMA_ERQ_ERQ3 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ3. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ3 field. */ +#define BR_DMA_ERQ_ERQ3(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ3. */ +#define BF_DMA_ERQ_ERQ3(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ3) & BM_DMA_ERQ_ERQ3) + +/*! @brief Set the ERQ3 field to a new value. */ +#define BW_DMA_ERQ_ERQ3(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ4[4] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ4 (4U) /*!< Bit position for DMA_ERQ_ERQ4. */ +#define BM_DMA_ERQ_ERQ4 (0x00000010U) /*!< Bit mask for DMA_ERQ_ERQ4. */ +#define BS_DMA_ERQ_ERQ4 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ4. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ4 field. */ +#define BR_DMA_ERQ_ERQ4(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ4. */ +#define BF_DMA_ERQ_ERQ4(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ4) & BM_DMA_ERQ_ERQ4) + +/*! @brief Set the ERQ4 field to a new value. */ +#define BW_DMA_ERQ_ERQ4(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ5[5] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ5 (5U) /*!< Bit position for DMA_ERQ_ERQ5. */ +#define BM_DMA_ERQ_ERQ5 (0x00000020U) /*!< Bit mask for DMA_ERQ_ERQ5. */ +#define BS_DMA_ERQ_ERQ5 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ5. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ5 field. */ +#define BR_DMA_ERQ_ERQ5(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ5. */ +#define BF_DMA_ERQ_ERQ5(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ5) & BM_DMA_ERQ_ERQ5) + +/*! @brief Set the ERQ5 field to a new value. */ +#define BW_DMA_ERQ_ERQ5(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ6[6] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ6 (6U) /*!< Bit position for DMA_ERQ_ERQ6. */ +#define BM_DMA_ERQ_ERQ6 (0x00000040U) /*!< Bit mask for DMA_ERQ_ERQ6. */ +#define BS_DMA_ERQ_ERQ6 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ6. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ6 field. */ +#define BR_DMA_ERQ_ERQ6(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ6. */ +#define BF_DMA_ERQ_ERQ6(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ6) & BM_DMA_ERQ_ERQ6) + +/*! @brief Set the ERQ6 field to a new value. */ +#define BW_DMA_ERQ_ERQ6(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ7[7] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ7 (7U) /*!< Bit position for DMA_ERQ_ERQ7. */ +#define BM_DMA_ERQ_ERQ7 (0x00000080U) /*!< Bit mask for DMA_ERQ_ERQ7. */ +#define BS_DMA_ERQ_ERQ7 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ7. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ7 field. */ +#define BR_DMA_ERQ_ERQ7(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ7. */ +#define BF_DMA_ERQ_ERQ7(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ7) & BM_DMA_ERQ_ERQ7) + +/*! @brief Set the ERQ7 field to a new value. */ +#define BW_DMA_ERQ_ERQ7(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ8[8] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ8 (8U) /*!< Bit position for DMA_ERQ_ERQ8. */ +#define BM_DMA_ERQ_ERQ8 (0x00000100U) /*!< Bit mask for DMA_ERQ_ERQ8. */ +#define BS_DMA_ERQ_ERQ8 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ8. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ8 field. */ +#define BR_DMA_ERQ_ERQ8(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ8. */ +#define BF_DMA_ERQ_ERQ8(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ8) & BM_DMA_ERQ_ERQ8) + +/*! @brief Set the ERQ8 field to a new value. */ +#define BW_DMA_ERQ_ERQ8(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ9[9] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ9 (9U) /*!< Bit position for DMA_ERQ_ERQ9. */ +#define BM_DMA_ERQ_ERQ9 (0x00000200U) /*!< Bit mask for DMA_ERQ_ERQ9. */ +#define BS_DMA_ERQ_ERQ9 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ9. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ9 field. */ +#define BR_DMA_ERQ_ERQ9(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ9. */ +#define BF_DMA_ERQ_ERQ9(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ9) & BM_DMA_ERQ_ERQ9) + +/*! @brief Set the ERQ9 field to a new value. */ +#define BW_DMA_ERQ_ERQ9(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ10[10] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ10 (10U) /*!< Bit position for DMA_ERQ_ERQ10. */ +#define BM_DMA_ERQ_ERQ10 (0x00000400U) /*!< Bit mask for DMA_ERQ_ERQ10. */ +#define BS_DMA_ERQ_ERQ10 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ10. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ10 field. */ +#define BR_DMA_ERQ_ERQ10(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ10. */ +#define BF_DMA_ERQ_ERQ10(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ10) & BM_DMA_ERQ_ERQ10) + +/*! @brief Set the ERQ10 field to a new value. */ +#define BW_DMA_ERQ_ERQ10(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ11[11] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ11 (11U) /*!< Bit position for DMA_ERQ_ERQ11. */ +#define BM_DMA_ERQ_ERQ11 (0x00000800U) /*!< Bit mask for DMA_ERQ_ERQ11. */ +#define BS_DMA_ERQ_ERQ11 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ11. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ11 field. */ +#define BR_DMA_ERQ_ERQ11(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ11. */ +#define BF_DMA_ERQ_ERQ11(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ11) & BM_DMA_ERQ_ERQ11) + +/*! @brief Set the ERQ11 field to a new value. */ +#define BW_DMA_ERQ_ERQ11(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ12[12] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ12 (12U) /*!< Bit position for DMA_ERQ_ERQ12. */ +#define BM_DMA_ERQ_ERQ12 (0x00001000U) /*!< Bit mask for DMA_ERQ_ERQ12. */ +#define BS_DMA_ERQ_ERQ12 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ12. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ12 field. */ +#define BR_DMA_ERQ_ERQ12(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ12. */ +#define BF_DMA_ERQ_ERQ12(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ12) & BM_DMA_ERQ_ERQ12) + +/*! @brief Set the ERQ12 field to a new value. */ +#define BW_DMA_ERQ_ERQ12(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ13[13] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ13 (13U) /*!< Bit position for DMA_ERQ_ERQ13. */ +#define BM_DMA_ERQ_ERQ13 (0x00002000U) /*!< Bit mask for DMA_ERQ_ERQ13. */ +#define BS_DMA_ERQ_ERQ13 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ13. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ13 field. */ +#define BR_DMA_ERQ_ERQ13(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ13. */ +#define BF_DMA_ERQ_ERQ13(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ13) & BM_DMA_ERQ_ERQ13) + +/*! @brief Set the ERQ13 field to a new value. */ +#define BW_DMA_ERQ_ERQ13(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ14[14] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ14 (14U) /*!< Bit position for DMA_ERQ_ERQ14. */ +#define BM_DMA_ERQ_ERQ14 (0x00004000U) /*!< Bit mask for DMA_ERQ_ERQ14. */ +#define BS_DMA_ERQ_ERQ14 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ14. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ14 field. */ +#define BR_DMA_ERQ_ERQ14(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ14. */ +#define BF_DMA_ERQ_ERQ14(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ14) & BM_DMA_ERQ_ERQ14) + +/*! @brief Set the ERQ14 field to a new value. */ +#define BW_DMA_ERQ_ERQ14(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERQ, field ERQ15[15] (RW) + * + * Values: + * - 0 - The DMA request signal for the corresponding channel is disabled + * - 1 - The DMA request signal for the corresponding channel is enabled + */ +/*@{*/ +#define BP_DMA_ERQ_ERQ15 (15U) /*!< Bit position for DMA_ERQ_ERQ15. */ +#define BM_DMA_ERQ_ERQ15 (0x00008000U) /*!< Bit mask for DMA_ERQ_ERQ15. */ +#define BS_DMA_ERQ_ERQ15 (1U) /*!< Bit field size in bits for DMA_ERQ_ERQ15. */ + +/*! @brief Read current value of the DMA_ERQ_ERQ15 field. */ +#define BR_DMA_ERQ_ERQ15(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15)) + +/*! @brief Format value for bitfield DMA_ERQ_ERQ15. */ +#define BF_DMA_ERQ_ERQ15(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERQ_ERQ15) & BM_DMA_ERQ_ERQ15) + +/*! @brief Set the ERQ15 field to a new value. */ +#define BW_DMA_ERQ_ERQ15(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_EEI - Enable Error Interrupt Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_EEI - Enable Error Interrupt Register (RW) + * + * Reset value: 0x00000000U + * + * The EEI register provides a bit map for the 16 channels to enable the error + * interrupt signal for each channel. The state of any given channel's error + * interrupt enable is directly affected by writes to this register; it is also + * affected by writes to the SEEI and CEEI. The {S,C}EEI are provided so the error + * interrupt enable for a single channel can easily be modified without the need to + * perform a read-modify-write sequence to the EEI register. The DMA error + * indicator and the error interrupt enable flag must be asserted before an error + * interrupt request for a given channel is asserted to the interrupt controller. + */ +typedef union _hw_dma_eei +{ + uint32_t U; + struct _hw_dma_eei_bitfields + { + uint32_t EEI0 : 1; /*!< [0] Enable Error Interrupt 0 */ + uint32_t EEI1 : 1; /*!< [1] Enable Error Interrupt 1 */ + uint32_t EEI2 : 1; /*!< [2] Enable Error Interrupt 2 */ + uint32_t EEI3 : 1; /*!< [3] Enable Error Interrupt 3 */ + uint32_t EEI4 : 1; /*!< [4] Enable Error Interrupt 4 */ + uint32_t EEI5 : 1; /*!< [5] Enable Error Interrupt 5 */ + uint32_t EEI6 : 1; /*!< [6] Enable Error Interrupt 6 */ + uint32_t EEI7 : 1; /*!< [7] Enable Error Interrupt 7 */ + uint32_t EEI8 : 1; /*!< [8] Enable Error Interrupt 8 */ + uint32_t EEI9 : 1; /*!< [9] Enable Error Interrupt 9 */ + uint32_t EEI10 : 1; /*!< [10] Enable Error Interrupt 10 */ + uint32_t EEI11 : 1; /*!< [11] Enable Error Interrupt 11 */ + uint32_t EEI12 : 1; /*!< [12] Enable Error Interrupt 12 */ + uint32_t EEI13 : 1; /*!< [13] Enable Error Interrupt 13 */ + uint32_t EEI14 : 1; /*!< [14] Enable Error Interrupt 14 */ + uint32_t EEI15 : 1; /*!< [15] Enable Error Interrupt 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_dma_eei_t; + +/*! + * @name Constants and macros for entire DMA_EEI register + */ +/*@{*/ +#define HW_DMA_EEI_ADDR(x) ((x) + 0x14U) + +#define HW_DMA_EEI(x) (*(__IO hw_dma_eei_t *) HW_DMA_EEI_ADDR(x)) +#define HW_DMA_EEI_RD(x) (HW_DMA_EEI(x).U) +#define HW_DMA_EEI_WR(x, v) (HW_DMA_EEI(x).U = (v)) +#define HW_DMA_EEI_SET(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) | (v))) +#define HW_DMA_EEI_CLR(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) & ~(v))) +#define HW_DMA_EEI_TOG(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_EEI bitfields + */ + +/*! + * @name Register DMA_EEI, field EEI0[0] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI0 (0U) /*!< Bit position for DMA_EEI_EEI0. */ +#define BM_DMA_EEI_EEI0 (0x00000001U) /*!< Bit mask for DMA_EEI_EEI0. */ +#define BS_DMA_EEI_EEI0 (1U) /*!< Bit field size in bits for DMA_EEI_EEI0. */ + +/*! @brief Read current value of the DMA_EEI_EEI0 field. */ +#define BR_DMA_EEI_EEI0(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0)) + +/*! @brief Format value for bitfield DMA_EEI_EEI0. */ +#define BF_DMA_EEI_EEI0(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI0) & BM_DMA_EEI_EEI0) + +/*! @brief Set the EEI0 field to a new value. */ +#define BW_DMA_EEI_EEI0(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI1[1] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI1 (1U) /*!< Bit position for DMA_EEI_EEI1. */ +#define BM_DMA_EEI_EEI1 (0x00000002U) /*!< Bit mask for DMA_EEI_EEI1. */ +#define BS_DMA_EEI_EEI1 (1U) /*!< Bit field size in bits for DMA_EEI_EEI1. */ + +/*! @brief Read current value of the DMA_EEI_EEI1 field. */ +#define BR_DMA_EEI_EEI1(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1)) + +/*! @brief Format value for bitfield DMA_EEI_EEI1. */ +#define BF_DMA_EEI_EEI1(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI1) & BM_DMA_EEI_EEI1) + +/*! @brief Set the EEI1 field to a new value. */ +#define BW_DMA_EEI_EEI1(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI2[2] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI2 (2U) /*!< Bit position for DMA_EEI_EEI2. */ +#define BM_DMA_EEI_EEI2 (0x00000004U) /*!< Bit mask for DMA_EEI_EEI2. */ +#define BS_DMA_EEI_EEI2 (1U) /*!< Bit field size in bits for DMA_EEI_EEI2. */ + +/*! @brief Read current value of the DMA_EEI_EEI2 field. */ +#define BR_DMA_EEI_EEI2(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2)) + +/*! @brief Format value for bitfield DMA_EEI_EEI2. */ +#define BF_DMA_EEI_EEI2(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI2) & BM_DMA_EEI_EEI2) + +/*! @brief Set the EEI2 field to a new value. */ +#define BW_DMA_EEI_EEI2(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI3[3] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI3 (3U) /*!< Bit position for DMA_EEI_EEI3. */ +#define BM_DMA_EEI_EEI3 (0x00000008U) /*!< Bit mask for DMA_EEI_EEI3. */ +#define BS_DMA_EEI_EEI3 (1U) /*!< Bit field size in bits for DMA_EEI_EEI3. */ + +/*! @brief Read current value of the DMA_EEI_EEI3 field. */ +#define BR_DMA_EEI_EEI3(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3)) + +/*! @brief Format value for bitfield DMA_EEI_EEI3. */ +#define BF_DMA_EEI_EEI3(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI3) & BM_DMA_EEI_EEI3) + +/*! @brief Set the EEI3 field to a new value. */ +#define BW_DMA_EEI_EEI3(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI4[4] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI4 (4U) /*!< Bit position for DMA_EEI_EEI4. */ +#define BM_DMA_EEI_EEI4 (0x00000010U) /*!< Bit mask for DMA_EEI_EEI4. */ +#define BS_DMA_EEI_EEI4 (1U) /*!< Bit field size in bits for DMA_EEI_EEI4. */ + +/*! @brief Read current value of the DMA_EEI_EEI4 field. */ +#define BR_DMA_EEI_EEI4(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4)) + +/*! @brief Format value for bitfield DMA_EEI_EEI4. */ +#define BF_DMA_EEI_EEI4(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI4) & BM_DMA_EEI_EEI4) + +/*! @brief Set the EEI4 field to a new value. */ +#define BW_DMA_EEI_EEI4(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI5[5] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI5 (5U) /*!< Bit position for DMA_EEI_EEI5. */ +#define BM_DMA_EEI_EEI5 (0x00000020U) /*!< Bit mask for DMA_EEI_EEI5. */ +#define BS_DMA_EEI_EEI5 (1U) /*!< Bit field size in bits for DMA_EEI_EEI5. */ + +/*! @brief Read current value of the DMA_EEI_EEI5 field. */ +#define BR_DMA_EEI_EEI5(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5)) + +/*! @brief Format value for bitfield DMA_EEI_EEI5. */ +#define BF_DMA_EEI_EEI5(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI5) & BM_DMA_EEI_EEI5) + +/*! @brief Set the EEI5 field to a new value. */ +#define BW_DMA_EEI_EEI5(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI6[6] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI6 (6U) /*!< Bit position for DMA_EEI_EEI6. */ +#define BM_DMA_EEI_EEI6 (0x00000040U) /*!< Bit mask for DMA_EEI_EEI6. */ +#define BS_DMA_EEI_EEI6 (1U) /*!< Bit field size in bits for DMA_EEI_EEI6. */ + +/*! @brief Read current value of the DMA_EEI_EEI6 field. */ +#define BR_DMA_EEI_EEI6(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6)) + +/*! @brief Format value for bitfield DMA_EEI_EEI6. */ +#define BF_DMA_EEI_EEI6(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI6) & BM_DMA_EEI_EEI6) + +/*! @brief Set the EEI6 field to a new value. */ +#define BW_DMA_EEI_EEI6(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI7[7] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI7 (7U) /*!< Bit position for DMA_EEI_EEI7. */ +#define BM_DMA_EEI_EEI7 (0x00000080U) /*!< Bit mask for DMA_EEI_EEI7. */ +#define BS_DMA_EEI_EEI7 (1U) /*!< Bit field size in bits for DMA_EEI_EEI7. */ + +/*! @brief Read current value of the DMA_EEI_EEI7 field. */ +#define BR_DMA_EEI_EEI7(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7)) + +/*! @brief Format value for bitfield DMA_EEI_EEI7. */ +#define BF_DMA_EEI_EEI7(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI7) & BM_DMA_EEI_EEI7) + +/*! @brief Set the EEI7 field to a new value. */ +#define BW_DMA_EEI_EEI7(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI8[8] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI8 (8U) /*!< Bit position for DMA_EEI_EEI8. */ +#define BM_DMA_EEI_EEI8 (0x00000100U) /*!< Bit mask for DMA_EEI_EEI8. */ +#define BS_DMA_EEI_EEI8 (1U) /*!< Bit field size in bits for DMA_EEI_EEI8. */ + +/*! @brief Read current value of the DMA_EEI_EEI8 field. */ +#define BR_DMA_EEI_EEI8(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8)) + +/*! @brief Format value for bitfield DMA_EEI_EEI8. */ +#define BF_DMA_EEI_EEI8(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI8) & BM_DMA_EEI_EEI8) + +/*! @brief Set the EEI8 field to a new value. */ +#define BW_DMA_EEI_EEI8(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI9[9] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI9 (9U) /*!< Bit position for DMA_EEI_EEI9. */ +#define BM_DMA_EEI_EEI9 (0x00000200U) /*!< Bit mask for DMA_EEI_EEI9. */ +#define BS_DMA_EEI_EEI9 (1U) /*!< Bit field size in bits for DMA_EEI_EEI9. */ + +/*! @brief Read current value of the DMA_EEI_EEI9 field. */ +#define BR_DMA_EEI_EEI9(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9)) + +/*! @brief Format value for bitfield DMA_EEI_EEI9. */ +#define BF_DMA_EEI_EEI9(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI9) & BM_DMA_EEI_EEI9) + +/*! @brief Set the EEI9 field to a new value. */ +#define BW_DMA_EEI_EEI9(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI10[10] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI10 (10U) /*!< Bit position for DMA_EEI_EEI10. */ +#define BM_DMA_EEI_EEI10 (0x00000400U) /*!< Bit mask for DMA_EEI_EEI10. */ +#define BS_DMA_EEI_EEI10 (1U) /*!< Bit field size in bits for DMA_EEI_EEI10. */ + +/*! @brief Read current value of the DMA_EEI_EEI10 field. */ +#define BR_DMA_EEI_EEI10(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10)) + +/*! @brief Format value for bitfield DMA_EEI_EEI10. */ +#define BF_DMA_EEI_EEI10(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI10) & BM_DMA_EEI_EEI10) + +/*! @brief Set the EEI10 field to a new value. */ +#define BW_DMA_EEI_EEI10(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI11[11] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI11 (11U) /*!< Bit position for DMA_EEI_EEI11. */ +#define BM_DMA_EEI_EEI11 (0x00000800U) /*!< Bit mask for DMA_EEI_EEI11. */ +#define BS_DMA_EEI_EEI11 (1U) /*!< Bit field size in bits for DMA_EEI_EEI11. */ + +/*! @brief Read current value of the DMA_EEI_EEI11 field. */ +#define BR_DMA_EEI_EEI11(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11)) + +/*! @brief Format value for bitfield DMA_EEI_EEI11. */ +#define BF_DMA_EEI_EEI11(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI11) & BM_DMA_EEI_EEI11) + +/*! @brief Set the EEI11 field to a new value. */ +#define BW_DMA_EEI_EEI11(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI12[12] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI12 (12U) /*!< Bit position for DMA_EEI_EEI12. */ +#define BM_DMA_EEI_EEI12 (0x00001000U) /*!< Bit mask for DMA_EEI_EEI12. */ +#define BS_DMA_EEI_EEI12 (1U) /*!< Bit field size in bits for DMA_EEI_EEI12. */ + +/*! @brief Read current value of the DMA_EEI_EEI12 field. */ +#define BR_DMA_EEI_EEI12(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12)) + +/*! @brief Format value for bitfield DMA_EEI_EEI12. */ +#define BF_DMA_EEI_EEI12(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI12) & BM_DMA_EEI_EEI12) + +/*! @brief Set the EEI12 field to a new value. */ +#define BW_DMA_EEI_EEI12(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI13[13] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI13 (13U) /*!< Bit position for DMA_EEI_EEI13. */ +#define BM_DMA_EEI_EEI13 (0x00002000U) /*!< Bit mask for DMA_EEI_EEI13. */ +#define BS_DMA_EEI_EEI13 (1U) /*!< Bit field size in bits for DMA_EEI_EEI13. */ + +/*! @brief Read current value of the DMA_EEI_EEI13 field. */ +#define BR_DMA_EEI_EEI13(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13)) + +/*! @brief Format value for bitfield DMA_EEI_EEI13. */ +#define BF_DMA_EEI_EEI13(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI13) & BM_DMA_EEI_EEI13) + +/*! @brief Set the EEI13 field to a new value. */ +#define BW_DMA_EEI_EEI13(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI14[14] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI14 (14U) /*!< Bit position for DMA_EEI_EEI14. */ +#define BM_DMA_EEI_EEI14 (0x00004000U) /*!< Bit mask for DMA_EEI_EEI14. */ +#define BS_DMA_EEI_EEI14 (1U) /*!< Bit field size in bits for DMA_EEI_EEI14. */ + +/*! @brief Read current value of the DMA_EEI_EEI14 field. */ +#define BR_DMA_EEI_EEI14(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14)) + +/*! @brief Format value for bitfield DMA_EEI_EEI14. */ +#define BF_DMA_EEI_EEI14(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI14) & BM_DMA_EEI_EEI14) + +/*! @brief Set the EEI14 field to a new value. */ +#define BW_DMA_EEI_EEI14(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EEI, field EEI15[15] (RW) + * + * Values: + * - 0 - The error signal for corresponding channel does not generate an error + * interrupt + * - 1 - The assertion of the error signal for corresponding channel generates + * an error interrupt request + */ +/*@{*/ +#define BP_DMA_EEI_EEI15 (15U) /*!< Bit position for DMA_EEI_EEI15. */ +#define BM_DMA_EEI_EEI15 (0x00008000U) /*!< Bit mask for DMA_EEI_EEI15. */ +#define BS_DMA_EEI_EEI15 (1U) /*!< Bit field size in bits for DMA_EEI_EEI15. */ + +/*! @brief Read current value of the DMA_EEI_EEI15 field. */ +#define BR_DMA_EEI_EEI15(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15)) + +/*! @brief Format value for bitfield DMA_EEI_EEI15. */ +#define BF_DMA_EEI_EEI15(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EEI_EEI15) & BM_DMA_EEI_EEI15) + +/*! @brief Set the EEI15 field to a new value. */ +#define BW_DMA_EEI_EEI15(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_CEEI - Clear Enable Error Interrupt Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CEEI - Clear Enable Error Interrupt Register (WO) + * + * Reset value: 0x00U + * + * The CEEI provides a simple memory-mapped mechanism to clear a given bit in + * the EEI to disable the error interrupt for a given channel. The data value on a + * register write causes the corresponding bit in the EEI to be cleared. Setting + * the CAEE bit provides a global clear function, forcing the EEI contents to be + * cleared, disabling all DMA request inputs. If the NOP bit is set, the command + * is ignored. This allows you to write multiple-byte registers as a 32-bit word. + * Reads of this register return all zeroes. + */ +typedef union _hw_dma_ceei +{ + uint8_t U; + struct _hw_dma_ceei_bitfields + { + uint8_t CEEI : 4; /*!< [3:0] Clear Enable Error Interrupt */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t CAEE : 1; /*!< [6] Clear All Enable Error Interrupts */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_ceei_t; + +/*! + * @name Constants and macros for entire DMA_CEEI register + */ +/*@{*/ +#define HW_DMA_CEEI_ADDR(x) ((x) + 0x18U) + +#define HW_DMA_CEEI(x) (*(__O hw_dma_ceei_t *) HW_DMA_CEEI_ADDR(x)) +#define HW_DMA_CEEI_RD(x) (HW_DMA_CEEI(x).U) +#define HW_DMA_CEEI_WR(x, v) (HW_DMA_CEEI(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_CEEI bitfields + */ + +/*! + * @name Register DMA_CEEI, field CEEI[3:0] (WORZ) + * + * Clears the corresponding bit in EEI + */ +/*@{*/ +#define BP_DMA_CEEI_CEEI (0U) /*!< Bit position for DMA_CEEI_CEEI. */ +#define BM_DMA_CEEI_CEEI (0x0FU) /*!< Bit mask for DMA_CEEI_CEEI. */ +#define BS_DMA_CEEI_CEEI (4U) /*!< Bit field size in bits for DMA_CEEI_CEEI. */ + +/*! @brief Format value for bitfield DMA_CEEI_CEEI. */ +#define BF_DMA_CEEI_CEEI(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CEEI_CEEI) & BM_DMA_CEEI_CEEI) + +/*! @brief Set the CEEI field to a new value. */ +#define BW_DMA_CEEI_CEEI(x, v) (HW_DMA_CEEI_WR(x, (HW_DMA_CEEI_RD(x) & ~BM_DMA_CEEI_CEEI) | BF_DMA_CEEI_CEEI(v))) +/*@}*/ + +/*! + * @name Register DMA_CEEI, field CAEE[6] (WORZ) + * + * Values: + * - 0 - Clear only the EEI bit specified in the CEEI field + * - 1 - Clear all bits in EEI + */ +/*@{*/ +#define BP_DMA_CEEI_CAEE (6U) /*!< Bit position for DMA_CEEI_CAEE. */ +#define BM_DMA_CEEI_CAEE (0x40U) /*!< Bit mask for DMA_CEEI_CAEE. */ +#define BS_DMA_CEEI_CAEE (1U) /*!< Bit field size in bits for DMA_CEEI_CAEE. */ + +/*! @brief Format value for bitfield DMA_CEEI_CAEE. */ +#define BF_DMA_CEEI_CAEE(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CEEI_CAEE) & BM_DMA_CEEI_CAEE) + +/*! @brief Set the CAEE field to a new value. */ +#define BW_DMA_CEEI_CAEE(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_CAEE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CEEI, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_CEEI_NOP (7U) /*!< Bit position for DMA_CEEI_NOP. */ +#define BM_DMA_CEEI_NOP (0x80U) /*!< Bit mask for DMA_CEEI_NOP. */ +#define BS_DMA_CEEI_NOP (1U) /*!< Bit field size in bits for DMA_CEEI_NOP. */ + +/*! @brief Format value for bitfield DMA_CEEI_NOP. */ +#define BF_DMA_CEEI_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CEEI_NOP) & BM_DMA_CEEI_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_CEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_SEEI - Set Enable Error Interrupt Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_SEEI - Set Enable Error Interrupt Register (WO) + * + * Reset value: 0x00U + * + * The SEEI provides a simple memory-mapped mechanism to set a given bit in the + * EEI to enable the error interrupt for a given channel. The data value on a + * register write causes the corresponding bit in the EEI to be set. Setting the + * SAEE bit provides a global set function, forcing the entire EEI contents to be + * set. If the NOP bit is set, the command is ignored. This allows you to write + * multiple-byte registers as a 32-bit word. Reads of this register return all + * zeroes. + */ +typedef union _hw_dma_seei +{ + uint8_t U; + struct _hw_dma_seei_bitfields + { + uint8_t SEEI : 4; /*!< [3:0] Set Enable Error Interrupt */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t SAEE : 1; /*!< [6] Sets All Enable Error Interrupts */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_seei_t; + +/*! + * @name Constants and macros for entire DMA_SEEI register + */ +/*@{*/ +#define HW_DMA_SEEI_ADDR(x) ((x) + 0x19U) + +#define HW_DMA_SEEI(x) (*(__O hw_dma_seei_t *) HW_DMA_SEEI_ADDR(x)) +#define HW_DMA_SEEI_RD(x) (HW_DMA_SEEI(x).U) +#define HW_DMA_SEEI_WR(x, v) (HW_DMA_SEEI(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_SEEI bitfields + */ + +/*! + * @name Register DMA_SEEI, field SEEI[3:0] (WORZ) + * + * Sets the corresponding bit in EEI + */ +/*@{*/ +#define BP_DMA_SEEI_SEEI (0U) /*!< Bit position for DMA_SEEI_SEEI. */ +#define BM_DMA_SEEI_SEEI (0x0FU) /*!< Bit mask for DMA_SEEI_SEEI. */ +#define BS_DMA_SEEI_SEEI (4U) /*!< Bit field size in bits for DMA_SEEI_SEEI. */ + +/*! @brief Format value for bitfield DMA_SEEI_SEEI. */ +#define BF_DMA_SEEI_SEEI(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SEEI_SEEI) & BM_DMA_SEEI_SEEI) + +/*! @brief Set the SEEI field to a new value. */ +#define BW_DMA_SEEI_SEEI(x, v) (HW_DMA_SEEI_WR(x, (HW_DMA_SEEI_RD(x) & ~BM_DMA_SEEI_SEEI) | BF_DMA_SEEI_SEEI(v))) +/*@}*/ + +/*! + * @name Register DMA_SEEI, field SAEE[6] (WORZ) + * + * Values: + * - 0 - Set only the EEI bit specified in the SEEI field. + * - 1 - Sets all bits in EEI + */ +/*@{*/ +#define BP_DMA_SEEI_SAEE (6U) /*!< Bit position for DMA_SEEI_SAEE. */ +#define BM_DMA_SEEI_SAEE (0x40U) /*!< Bit mask for DMA_SEEI_SAEE. */ +#define BS_DMA_SEEI_SAEE (1U) /*!< Bit field size in bits for DMA_SEEI_SAEE. */ + +/*! @brief Format value for bitfield DMA_SEEI_SAEE. */ +#define BF_DMA_SEEI_SAEE(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SEEI_SAEE) & BM_DMA_SEEI_SAEE) + +/*! @brief Set the SAEE field to a new value. */ +#define BW_DMA_SEEI_SAEE(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_SAEE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_SEEI, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_SEEI_NOP (7U) /*!< Bit position for DMA_SEEI_NOP. */ +#define BM_DMA_SEEI_NOP (0x80U) /*!< Bit mask for DMA_SEEI_NOP. */ +#define BS_DMA_SEEI_NOP (1U) /*!< Bit field size in bits for DMA_SEEI_NOP. */ + +/*! @brief Format value for bitfield DMA_SEEI_NOP. */ +#define BF_DMA_SEEI_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SEEI_NOP) & BM_DMA_SEEI_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_SEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_CERQ - Clear Enable Request Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CERQ - Clear Enable Request Register (WO) + * + * Reset value: 0x00U + * + * The CERQ provides a simple memory-mapped mechanism to clear a given bit in + * the ERQ to disable the DMA request for a given channel. The data value on a + * register write causes the corresponding bit in the ERQ to be cleared. Setting the + * CAER bit provides a global clear function, forcing the entire contents of the + * ERQ to be cleared, disabling all DMA request inputs. If NOP is set, the + * command is ignored. This allows you to write multiple-byte registers as a 32-bit + * word. Reads of this register return all zeroes. + */ +typedef union _hw_dma_cerq +{ + uint8_t U; + struct _hw_dma_cerq_bitfields + { + uint8_t CERQ : 4; /*!< [3:0] Clear Enable Request */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t CAER : 1; /*!< [6] Clear All Enable Requests */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_cerq_t; + +/*! + * @name Constants and macros for entire DMA_CERQ register + */ +/*@{*/ +#define HW_DMA_CERQ_ADDR(x) ((x) + 0x1AU) + +#define HW_DMA_CERQ(x) (*(__O hw_dma_cerq_t *) HW_DMA_CERQ_ADDR(x)) +#define HW_DMA_CERQ_RD(x) (HW_DMA_CERQ(x).U) +#define HW_DMA_CERQ_WR(x, v) (HW_DMA_CERQ(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_CERQ bitfields + */ + +/*! + * @name Register DMA_CERQ, field CERQ[3:0] (WORZ) + * + * Clears the corresponding bit in ERQ + */ +/*@{*/ +#define BP_DMA_CERQ_CERQ (0U) /*!< Bit position for DMA_CERQ_CERQ. */ +#define BM_DMA_CERQ_CERQ (0x0FU) /*!< Bit mask for DMA_CERQ_CERQ. */ +#define BS_DMA_CERQ_CERQ (4U) /*!< Bit field size in bits for DMA_CERQ_CERQ. */ + +/*! @brief Format value for bitfield DMA_CERQ_CERQ. */ +#define BF_DMA_CERQ_CERQ(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERQ_CERQ) & BM_DMA_CERQ_CERQ) + +/*! @brief Set the CERQ field to a new value. */ +#define BW_DMA_CERQ_CERQ(x, v) (HW_DMA_CERQ_WR(x, (HW_DMA_CERQ_RD(x) & ~BM_DMA_CERQ_CERQ) | BF_DMA_CERQ_CERQ(v))) +/*@}*/ + +/*! + * @name Register DMA_CERQ, field CAER[6] (WORZ) + * + * Values: + * - 0 - Clear only the ERQ bit specified in the CERQ field + * - 1 - Clear all bits in ERQ + */ +/*@{*/ +#define BP_DMA_CERQ_CAER (6U) /*!< Bit position for DMA_CERQ_CAER. */ +#define BM_DMA_CERQ_CAER (0x40U) /*!< Bit mask for DMA_CERQ_CAER. */ +#define BS_DMA_CERQ_CAER (1U) /*!< Bit field size in bits for DMA_CERQ_CAER. */ + +/*! @brief Format value for bitfield DMA_CERQ_CAER. */ +#define BF_DMA_CERQ_CAER(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERQ_CAER) & BM_DMA_CERQ_CAER) + +/*! @brief Set the CAER field to a new value. */ +#define BW_DMA_CERQ_CAER(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_CAER) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CERQ, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_CERQ_NOP (7U) /*!< Bit position for DMA_CERQ_NOP. */ +#define BM_DMA_CERQ_NOP (0x80U) /*!< Bit mask for DMA_CERQ_NOP. */ +#define BS_DMA_CERQ_NOP (1U) /*!< Bit field size in bits for DMA_CERQ_NOP. */ + +/*! @brief Format value for bitfield DMA_CERQ_NOP. */ +#define BF_DMA_CERQ_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERQ_NOP) & BM_DMA_CERQ_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_CERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_SERQ - Set Enable Request Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_SERQ - Set Enable Request Register (WO) + * + * Reset value: 0x00U + * + * The SERQ provides a simple memory-mapped mechanism to set a given bit in the + * ERQ to enable the DMA request for a given channel. The data value on a + * register write causes the corresponding bit in the ERQ to be set. Setting the SAER + * bit provides a global set function, forcing the entire contents of ERQ to be + * set. If the NOP bit is set, the command is ignored. This allows you to write + * multiple-byte registers as a 32-bit word. Reads of this register return all zeroes. + */ +typedef union _hw_dma_serq +{ + uint8_t U; + struct _hw_dma_serq_bitfields + { + uint8_t SERQ : 4; /*!< [3:0] Set enable request */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t SAER : 1; /*!< [6] Set All Enable Requests */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_serq_t; + +/*! + * @name Constants and macros for entire DMA_SERQ register + */ +/*@{*/ +#define HW_DMA_SERQ_ADDR(x) ((x) + 0x1BU) + +#define HW_DMA_SERQ(x) (*(__O hw_dma_serq_t *) HW_DMA_SERQ_ADDR(x)) +#define HW_DMA_SERQ_RD(x) (HW_DMA_SERQ(x).U) +#define HW_DMA_SERQ_WR(x, v) (HW_DMA_SERQ(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_SERQ bitfields + */ + +/*! + * @name Register DMA_SERQ, field SERQ[3:0] (WORZ) + * + * Sets the corresponding bit in ERQ + */ +/*@{*/ +#define BP_DMA_SERQ_SERQ (0U) /*!< Bit position for DMA_SERQ_SERQ. */ +#define BM_DMA_SERQ_SERQ (0x0FU) /*!< Bit mask for DMA_SERQ_SERQ. */ +#define BS_DMA_SERQ_SERQ (4U) /*!< Bit field size in bits for DMA_SERQ_SERQ. */ + +/*! @brief Format value for bitfield DMA_SERQ_SERQ. */ +#define BF_DMA_SERQ_SERQ(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SERQ_SERQ) & BM_DMA_SERQ_SERQ) + +/*! @brief Set the SERQ field to a new value. */ +#define BW_DMA_SERQ_SERQ(x, v) (HW_DMA_SERQ_WR(x, (HW_DMA_SERQ_RD(x) & ~BM_DMA_SERQ_SERQ) | BF_DMA_SERQ_SERQ(v))) +/*@}*/ + +/*! + * @name Register DMA_SERQ, field SAER[6] (WORZ) + * + * Values: + * - 0 - Set only the ERQ bit specified in the SERQ field + * - 1 - Set all bits in ERQ + */ +/*@{*/ +#define BP_DMA_SERQ_SAER (6U) /*!< Bit position for DMA_SERQ_SAER. */ +#define BM_DMA_SERQ_SAER (0x40U) /*!< Bit mask for DMA_SERQ_SAER. */ +#define BS_DMA_SERQ_SAER (1U) /*!< Bit field size in bits for DMA_SERQ_SAER. */ + +/*! @brief Format value for bitfield DMA_SERQ_SAER. */ +#define BF_DMA_SERQ_SAER(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SERQ_SAER) & BM_DMA_SERQ_SAER) + +/*! @brief Set the SAER field to a new value. */ +#define BW_DMA_SERQ_SAER(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_SAER) = (v)) +/*@}*/ + +/*! + * @name Register DMA_SERQ, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_SERQ_NOP (7U) /*!< Bit position for DMA_SERQ_NOP. */ +#define BM_DMA_SERQ_NOP (0x80U) /*!< Bit mask for DMA_SERQ_NOP. */ +#define BS_DMA_SERQ_NOP (1U) /*!< Bit field size in bits for DMA_SERQ_NOP. */ + +/*! @brief Format value for bitfield DMA_SERQ_NOP. */ +#define BF_DMA_SERQ_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SERQ_NOP) & BM_DMA_SERQ_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_SERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_CDNE - Clear DONE Status Bit Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CDNE - Clear DONE Status Bit Register (WO) + * + * Reset value: 0x00U + * + * The CDNE provides a simple memory-mapped mechanism to clear the DONE bit in + * the TCD of the given channel. The data value on a register write causes the + * DONE bit in the corresponding transfer control descriptor to be cleared. Setting + * the CADN bit provides a global clear function, forcing all DONE bits to be + * cleared. If the NOP bit is set, the command is ignored. This allows you to write + * multiple-byte registers as a 32-bit word. Reads of this register return all + * zeroes. + */ +typedef union _hw_dma_cdne +{ + uint8_t U; + struct _hw_dma_cdne_bitfields + { + uint8_t CDNE : 4; /*!< [3:0] Clear DONE Bit */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t CADN : 1; /*!< [6] Clears All DONE Bits */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_cdne_t; + +/*! + * @name Constants and macros for entire DMA_CDNE register + */ +/*@{*/ +#define HW_DMA_CDNE_ADDR(x) ((x) + 0x1CU) + +#define HW_DMA_CDNE(x) (*(__O hw_dma_cdne_t *) HW_DMA_CDNE_ADDR(x)) +#define HW_DMA_CDNE_RD(x) (HW_DMA_CDNE(x).U) +#define HW_DMA_CDNE_WR(x, v) (HW_DMA_CDNE(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_CDNE bitfields + */ + +/*! + * @name Register DMA_CDNE, field CDNE[3:0] (WORZ) + * + * Clears the corresponding bit in TCDn_CSR[DONE] + */ +/*@{*/ +#define BP_DMA_CDNE_CDNE (0U) /*!< Bit position for DMA_CDNE_CDNE. */ +#define BM_DMA_CDNE_CDNE (0x0FU) /*!< Bit mask for DMA_CDNE_CDNE. */ +#define BS_DMA_CDNE_CDNE (4U) /*!< Bit field size in bits for DMA_CDNE_CDNE. */ + +/*! @brief Format value for bitfield DMA_CDNE_CDNE. */ +#define BF_DMA_CDNE_CDNE(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CDNE_CDNE) & BM_DMA_CDNE_CDNE) + +/*! @brief Set the CDNE field to a new value. */ +#define BW_DMA_CDNE_CDNE(x, v) (HW_DMA_CDNE_WR(x, (HW_DMA_CDNE_RD(x) & ~BM_DMA_CDNE_CDNE) | BF_DMA_CDNE_CDNE(v))) +/*@}*/ + +/*! + * @name Register DMA_CDNE, field CADN[6] (WORZ) + * + * Values: + * - 0 - Clears only the TCDn_CSR[DONE] bit specified in the CDNE field + * - 1 - Clears all bits in TCDn_CSR[DONE] + */ +/*@{*/ +#define BP_DMA_CDNE_CADN (6U) /*!< Bit position for DMA_CDNE_CADN. */ +#define BM_DMA_CDNE_CADN (0x40U) /*!< Bit mask for DMA_CDNE_CADN. */ +#define BS_DMA_CDNE_CADN (1U) /*!< Bit field size in bits for DMA_CDNE_CADN. */ + +/*! @brief Format value for bitfield DMA_CDNE_CADN. */ +#define BF_DMA_CDNE_CADN(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CDNE_CADN) & BM_DMA_CDNE_CADN) + +/*! @brief Set the CADN field to a new value. */ +#define BW_DMA_CDNE_CADN(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_CADN) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CDNE, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_CDNE_NOP (7U) /*!< Bit position for DMA_CDNE_NOP. */ +#define BM_DMA_CDNE_NOP (0x80U) /*!< Bit mask for DMA_CDNE_NOP. */ +#define BS_DMA_CDNE_NOP (1U) /*!< Bit field size in bits for DMA_CDNE_NOP. */ + +/*! @brief Format value for bitfield DMA_CDNE_NOP. */ +#define BF_DMA_CDNE_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CDNE_NOP) & BM_DMA_CDNE_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_CDNE_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_SSRT - Set START Bit Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_SSRT - Set START Bit Register (WO) + * + * Reset value: 0x00U + * + * The SSRT provides a simple memory-mapped mechanism to set the START bit in + * the TCD of the given channel. The data value on a register write causes the + * START bit in the corresponding transfer control descriptor to be set. Setting the + * SAST bit provides a global set function, forcing all START bits to be set. If + * the NOP bit is set, the command is ignored. This allows you to write + * multiple-byte registers as a 32-bit word. Reads of this register return all zeroes. + */ +typedef union _hw_dma_ssrt +{ + uint8_t U; + struct _hw_dma_ssrt_bitfields + { + uint8_t SSRT : 4; /*!< [3:0] Set START Bit */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t SAST : 1; /*!< [6] Set All START Bits (activates all + * channels) */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_ssrt_t; + +/*! + * @name Constants and macros for entire DMA_SSRT register + */ +/*@{*/ +#define HW_DMA_SSRT_ADDR(x) ((x) + 0x1DU) + +#define HW_DMA_SSRT(x) (*(__O hw_dma_ssrt_t *) HW_DMA_SSRT_ADDR(x)) +#define HW_DMA_SSRT_RD(x) (HW_DMA_SSRT(x).U) +#define HW_DMA_SSRT_WR(x, v) (HW_DMA_SSRT(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_SSRT bitfields + */ + +/*! + * @name Register DMA_SSRT, field SSRT[3:0] (WORZ) + * + * Sets the corresponding bit in TCDn_CSR[START] + */ +/*@{*/ +#define BP_DMA_SSRT_SSRT (0U) /*!< Bit position for DMA_SSRT_SSRT. */ +#define BM_DMA_SSRT_SSRT (0x0FU) /*!< Bit mask for DMA_SSRT_SSRT. */ +#define BS_DMA_SSRT_SSRT (4U) /*!< Bit field size in bits for DMA_SSRT_SSRT. */ + +/*! @brief Format value for bitfield DMA_SSRT_SSRT. */ +#define BF_DMA_SSRT_SSRT(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SSRT_SSRT) & BM_DMA_SSRT_SSRT) + +/*! @brief Set the SSRT field to a new value. */ +#define BW_DMA_SSRT_SSRT(x, v) (HW_DMA_SSRT_WR(x, (HW_DMA_SSRT_RD(x) & ~BM_DMA_SSRT_SSRT) | BF_DMA_SSRT_SSRT(v))) +/*@}*/ + +/*! + * @name Register DMA_SSRT, field SAST[6] (WORZ) + * + * Values: + * - 0 - Set only the TCDn_CSR[START] bit specified in the SSRT field + * - 1 - Set all bits in TCDn_CSR[START] + */ +/*@{*/ +#define BP_DMA_SSRT_SAST (6U) /*!< Bit position for DMA_SSRT_SAST. */ +#define BM_DMA_SSRT_SAST (0x40U) /*!< Bit mask for DMA_SSRT_SAST. */ +#define BS_DMA_SSRT_SAST (1U) /*!< Bit field size in bits for DMA_SSRT_SAST. */ + +/*! @brief Format value for bitfield DMA_SSRT_SAST. */ +#define BF_DMA_SSRT_SAST(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SSRT_SAST) & BM_DMA_SSRT_SAST) + +/*! @brief Set the SAST field to a new value. */ +#define BW_DMA_SSRT_SAST(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_SAST) = (v)) +/*@}*/ + +/*! + * @name Register DMA_SSRT, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_SSRT_NOP (7U) /*!< Bit position for DMA_SSRT_NOP. */ +#define BM_DMA_SSRT_NOP (0x80U) /*!< Bit mask for DMA_SSRT_NOP. */ +#define BS_DMA_SSRT_NOP (1U) /*!< Bit field size in bits for DMA_SSRT_NOP. */ + +/*! @brief Format value for bitfield DMA_SSRT_NOP. */ +#define BF_DMA_SSRT_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_SSRT_NOP) & BM_DMA_SSRT_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_SSRT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_CERR - Clear Error Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CERR - Clear Error Register (WO) + * + * Reset value: 0x00U + * + * The CERR provides a simple memory-mapped mechanism to clear a given bit in + * the ERR to disable the error condition flag for a given channel. The given value + * on a register write causes the corresponding bit in the ERR to be cleared. + * Setting the CAEI bit provides a global clear function, forcing the ERR contents + * to be cleared, clearing all channel error indicators. If the NOP bit is set, + * the command is ignored. This allows you to write multiple-byte registers as a + * 32-bit word. Reads of this register return all zeroes. + */ +typedef union _hw_dma_cerr +{ + uint8_t U; + struct _hw_dma_cerr_bitfields + { + uint8_t CERR : 4; /*!< [3:0] Clear Error Indicator */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t CAEI : 1; /*!< [6] Clear All Error Indicators */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_cerr_t; + +/*! + * @name Constants and macros for entire DMA_CERR register + */ +/*@{*/ +#define HW_DMA_CERR_ADDR(x) ((x) + 0x1EU) + +#define HW_DMA_CERR(x) (*(__O hw_dma_cerr_t *) HW_DMA_CERR_ADDR(x)) +#define HW_DMA_CERR_RD(x) (HW_DMA_CERR(x).U) +#define HW_DMA_CERR_WR(x, v) (HW_DMA_CERR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_CERR bitfields + */ + +/*! + * @name Register DMA_CERR, field CERR[3:0] (WORZ) + * + * Clears the corresponding bit in ERR + */ +/*@{*/ +#define BP_DMA_CERR_CERR (0U) /*!< Bit position for DMA_CERR_CERR. */ +#define BM_DMA_CERR_CERR (0x0FU) /*!< Bit mask for DMA_CERR_CERR. */ +#define BS_DMA_CERR_CERR (4U) /*!< Bit field size in bits for DMA_CERR_CERR. */ + +/*! @brief Format value for bitfield DMA_CERR_CERR. */ +#define BF_DMA_CERR_CERR(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERR_CERR) & BM_DMA_CERR_CERR) + +/*! @brief Set the CERR field to a new value. */ +#define BW_DMA_CERR_CERR(x, v) (HW_DMA_CERR_WR(x, (HW_DMA_CERR_RD(x) & ~BM_DMA_CERR_CERR) | BF_DMA_CERR_CERR(v))) +/*@}*/ + +/*! + * @name Register DMA_CERR, field CAEI[6] (WORZ) + * + * Values: + * - 0 - Clear only the ERR bit specified in the CERR field + * - 1 - Clear all bits in ERR + */ +/*@{*/ +#define BP_DMA_CERR_CAEI (6U) /*!< Bit position for DMA_CERR_CAEI. */ +#define BM_DMA_CERR_CAEI (0x40U) /*!< Bit mask for DMA_CERR_CAEI. */ +#define BS_DMA_CERR_CAEI (1U) /*!< Bit field size in bits for DMA_CERR_CAEI. */ + +/*! @brief Format value for bitfield DMA_CERR_CAEI. */ +#define BF_DMA_CERR_CAEI(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERR_CAEI) & BM_DMA_CERR_CAEI) + +/*! @brief Set the CAEI field to a new value. */ +#define BW_DMA_CERR_CAEI(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_CAEI) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CERR, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_CERR_NOP (7U) /*!< Bit position for DMA_CERR_NOP. */ +#define BM_DMA_CERR_NOP (0x80U) /*!< Bit mask for DMA_CERR_NOP. */ +#define BS_DMA_CERR_NOP (1U) /*!< Bit field size in bits for DMA_CERR_NOP. */ + +/*! @brief Format value for bitfield DMA_CERR_NOP. */ +#define BF_DMA_CERR_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CERR_NOP) & BM_DMA_CERR_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_CERR_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_CINT - Clear Interrupt Request Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_CINT - Clear Interrupt Request Register (WO) + * + * Reset value: 0x00U + * + * The CINT provides a simple, memory-mapped mechanism to clear a given bit in + * the INT to disable the interrupt request for a given channel. The given value + * on a register write causes the corresponding bit in the INT to be cleared. + * Setting the CAIR bit provides a global clear function, forcing the entire contents + * of the INT to be cleared, disabling all DMA interrupt requests. If the NOP + * bit is set, the command is ignored. This allows you to write multiple-byte + * registers as a 32-bit word. Reads of this register return all zeroes. + */ +typedef union _hw_dma_cint +{ + uint8_t U; + struct _hw_dma_cint_bitfields + { + uint8_t CINT : 4; /*!< [3:0] Clear Interrupt Request */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t CAIR : 1; /*!< [6] Clear All Interrupt Requests */ + uint8_t NOP : 1; /*!< [7] No Op enable */ + } B; +} hw_dma_cint_t; + +/*! + * @name Constants and macros for entire DMA_CINT register + */ +/*@{*/ +#define HW_DMA_CINT_ADDR(x) ((x) + 0x1FU) + +#define HW_DMA_CINT(x) (*(__O hw_dma_cint_t *) HW_DMA_CINT_ADDR(x)) +#define HW_DMA_CINT_RD(x) (HW_DMA_CINT(x).U) +#define HW_DMA_CINT_WR(x, v) (HW_DMA_CINT(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual DMA_CINT bitfields + */ + +/*! + * @name Register DMA_CINT, field CINT[3:0] (WORZ) + * + * Clears the corresponding bit in INT + */ +/*@{*/ +#define BP_DMA_CINT_CINT (0U) /*!< Bit position for DMA_CINT_CINT. */ +#define BM_DMA_CINT_CINT (0x0FU) /*!< Bit mask for DMA_CINT_CINT. */ +#define BS_DMA_CINT_CINT (4U) /*!< Bit field size in bits for DMA_CINT_CINT. */ + +/*! @brief Format value for bitfield DMA_CINT_CINT. */ +#define BF_DMA_CINT_CINT(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CINT_CINT) & BM_DMA_CINT_CINT) + +/*! @brief Set the CINT field to a new value. */ +#define BW_DMA_CINT_CINT(x, v) (HW_DMA_CINT_WR(x, (HW_DMA_CINT_RD(x) & ~BM_DMA_CINT_CINT) | BF_DMA_CINT_CINT(v))) +/*@}*/ + +/*! + * @name Register DMA_CINT, field CAIR[6] (WORZ) + * + * Values: + * - 0 - Clear only the INT bit specified in the CINT field + * - 1 - Clear all bits in INT + */ +/*@{*/ +#define BP_DMA_CINT_CAIR (6U) /*!< Bit position for DMA_CINT_CAIR. */ +#define BM_DMA_CINT_CAIR (0x40U) /*!< Bit mask for DMA_CINT_CAIR. */ +#define BS_DMA_CINT_CAIR (1U) /*!< Bit field size in bits for DMA_CINT_CAIR. */ + +/*! @brief Format value for bitfield DMA_CINT_CAIR. */ +#define BF_DMA_CINT_CAIR(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CINT_CAIR) & BM_DMA_CINT_CAIR) + +/*! @brief Set the CAIR field to a new value. */ +#define BW_DMA_CINT_CAIR(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_CAIR) = (v)) +/*@}*/ + +/*! + * @name Register DMA_CINT, field NOP[7] (WORZ) + * + * Values: + * - 0 - Normal operation + * - 1 - No operation, ignore the other bits in this register + */ +/*@{*/ +#define BP_DMA_CINT_NOP (7U) /*!< Bit position for DMA_CINT_NOP. */ +#define BM_DMA_CINT_NOP (0x80U) /*!< Bit mask for DMA_CINT_NOP. */ +#define BS_DMA_CINT_NOP (1U) /*!< Bit field size in bits for DMA_CINT_NOP. */ + +/*! @brief Format value for bitfield DMA_CINT_NOP. */ +#define BF_DMA_CINT_NOP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_CINT_NOP) & BM_DMA_CINT_NOP) + +/*! @brief Set the NOP field to a new value. */ +#define BW_DMA_CINT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_NOP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_INT - Interrupt Request Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_INT - Interrupt Request Register (RW) + * + * Reset value: 0x00000000U + * + * The INT register provides a bit map for the 16 channels signaling the + * presence of an interrupt request for each channel. Depending on the appropriate bit + * setting in the transfer-control descriptors, the eDMA engine generates an + * interrupt on data transfer completion. The outputs of this register are directly + * routed to the interrupt controller (INTC). During the interrupt-service routine + * associated with any given channel, it is the software's responsibility to + * clear the appropriate bit, negating the interrupt request. Typically, a write to + * the CINT register in the interrupt service routine is used for this purpose. + * The state of any given channel's interrupt request is directly affected by + * writes to this register; it is also affected by writes to the CINT register. On + * writes to INT, a 1 in any bit position clears the corresponding channel's + * interrupt request. A zero in any bit position has no affect on the corresponding + * channel's current interrupt status. The CINT register is provided so the interrupt + * request for a single channel can easily be cleared without the need to + * perform a read-modify-write sequence to the INT register. + */ +typedef union _hw_dma_int +{ + uint32_t U; + struct _hw_dma_int_bitfields + { + uint32_t INT0 : 1; /*!< [0] Interrupt Request 0 */ + uint32_t INT1 : 1; /*!< [1] Interrupt Request 1 */ + uint32_t INT2 : 1; /*!< [2] Interrupt Request 2 */ + uint32_t INT3 : 1; /*!< [3] Interrupt Request 3 */ + uint32_t INT4 : 1; /*!< [4] Interrupt Request 4 */ + uint32_t INT5 : 1; /*!< [5] Interrupt Request 5 */ + uint32_t INT6 : 1; /*!< [6] Interrupt Request 6 */ + uint32_t INT7 : 1; /*!< [7] Interrupt Request 7 */ + uint32_t INT8 : 1; /*!< [8] Interrupt Request 8 */ + uint32_t INT9 : 1; /*!< [9] Interrupt Request 9 */ + uint32_t INT10 : 1; /*!< [10] Interrupt Request 10 */ + uint32_t INT11 : 1; /*!< [11] Interrupt Request 11 */ + uint32_t INT12 : 1; /*!< [12] Interrupt Request 12 */ + uint32_t INT13 : 1; /*!< [13] Interrupt Request 13 */ + uint32_t INT14 : 1; /*!< [14] Interrupt Request 14 */ + uint32_t INT15 : 1; /*!< [15] Interrupt Request 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_dma_int_t; + +/*! + * @name Constants and macros for entire DMA_INT register + */ +/*@{*/ +#define HW_DMA_INT_ADDR(x) ((x) + 0x24U) + +#define HW_DMA_INT(x) (*(__IO hw_dma_int_t *) HW_DMA_INT_ADDR(x)) +#define HW_DMA_INT_RD(x) (HW_DMA_INT(x).U) +#define HW_DMA_INT_WR(x, v) (HW_DMA_INT(x).U = (v)) +#define HW_DMA_INT_SET(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) | (v))) +#define HW_DMA_INT_CLR(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) & ~(v))) +#define HW_DMA_INT_TOG(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_INT bitfields + */ + +/*! + * @name Register DMA_INT, field INT0[0] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT0 (0U) /*!< Bit position for DMA_INT_INT0. */ +#define BM_DMA_INT_INT0 (0x00000001U) /*!< Bit mask for DMA_INT_INT0. */ +#define BS_DMA_INT_INT0 (1U) /*!< Bit field size in bits for DMA_INT_INT0. */ + +/*! @brief Read current value of the DMA_INT_INT0 field. */ +#define BR_DMA_INT_INT0(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0)) + +/*! @brief Format value for bitfield DMA_INT_INT0. */ +#define BF_DMA_INT_INT0(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT0) & BM_DMA_INT_INT0) + +/*! @brief Set the INT0 field to a new value. */ +#define BW_DMA_INT_INT0(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT1[1] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT1 (1U) /*!< Bit position for DMA_INT_INT1. */ +#define BM_DMA_INT_INT1 (0x00000002U) /*!< Bit mask for DMA_INT_INT1. */ +#define BS_DMA_INT_INT1 (1U) /*!< Bit field size in bits for DMA_INT_INT1. */ + +/*! @brief Read current value of the DMA_INT_INT1 field. */ +#define BR_DMA_INT_INT1(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1)) + +/*! @brief Format value for bitfield DMA_INT_INT1. */ +#define BF_DMA_INT_INT1(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT1) & BM_DMA_INT_INT1) + +/*! @brief Set the INT1 field to a new value. */ +#define BW_DMA_INT_INT1(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT2[2] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT2 (2U) /*!< Bit position for DMA_INT_INT2. */ +#define BM_DMA_INT_INT2 (0x00000004U) /*!< Bit mask for DMA_INT_INT2. */ +#define BS_DMA_INT_INT2 (1U) /*!< Bit field size in bits for DMA_INT_INT2. */ + +/*! @brief Read current value of the DMA_INT_INT2 field. */ +#define BR_DMA_INT_INT2(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2)) + +/*! @brief Format value for bitfield DMA_INT_INT2. */ +#define BF_DMA_INT_INT2(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT2) & BM_DMA_INT_INT2) + +/*! @brief Set the INT2 field to a new value. */ +#define BW_DMA_INT_INT2(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT3[3] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT3 (3U) /*!< Bit position for DMA_INT_INT3. */ +#define BM_DMA_INT_INT3 (0x00000008U) /*!< Bit mask for DMA_INT_INT3. */ +#define BS_DMA_INT_INT3 (1U) /*!< Bit field size in bits for DMA_INT_INT3. */ + +/*! @brief Read current value of the DMA_INT_INT3 field. */ +#define BR_DMA_INT_INT3(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3)) + +/*! @brief Format value for bitfield DMA_INT_INT3. */ +#define BF_DMA_INT_INT3(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT3) & BM_DMA_INT_INT3) + +/*! @brief Set the INT3 field to a new value. */ +#define BW_DMA_INT_INT3(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT4[4] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT4 (4U) /*!< Bit position for DMA_INT_INT4. */ +#define BM_DMA_INT_INT4 (0x00000010U) /*!< Bit mask for DMA_INT_INT4. */ +#define BS_DMA_INT_INT4 (1U) /*!< Bit field size in bits for DMA_INT_INT4. */ + +/*! @brief Read current value of the DMA_INT_INT4 field. */ +#define BR_DMA_INT_INT4(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4)) + +/*! @brief Format value for bitfield DMA_INT_INT4. */ +#define BF_DMA_INT_INT4(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT4) & BM_DMA_INT_INT4) + +/*! @brief Set the INT4 field to a new value. */ +#define BW_DMA_INT_INT4(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT5[5] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT5 (5U) /*!< Bit position for DMA_INT_INT5. */ +#define BM_DMA_INT_INT5 (0x00000020U) /*!< Bit mask for DMA_INT_INT5. */ +#define BS_DMA_INT_INT5 (1U) /*!< Bit field size in bits for DMA_INT_INT5. */ + +/*! @brief Read current value of the DMA_INT_INT5 field. */ +#define BR_DMA_INT_INT5(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5)) + +/*! @brief Format value for bitfield DMA_INT_INT5. */ +#define BF_DMA_INT_INT5(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT5) & BM_DMA_INT_INT5) + +/*! @brief Set the INT5 field to a new value. */ +#define BW_DMA_INT_INT5(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT6[6] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT6 (6U) /*!< Bit position for DMA_INT_INT6. */ +#define BM_DMA_INT_INT6 (0x00000040U) /*!< Bit mask for DMA_INT_INT6. */ +#define BS_DMA_INT_INT6 (1U) /*!< Bit field size in bits for DMA_INT_INT6. */ + +/*! @brief Read current value of the DMA_INT_INT6 field. */ +#define BR_DMA_INT_INT6(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6)) + +/*! @brief Format value for bitfield DMA_INT_INT6. */ +#define BF_DMA_INT_INT6(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT6) & BM_DMA_INT_INT6) + +/*! @brief Set the INT6 field to a new value. */ +#define BW_DMA_INT_INT6(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT7[7] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT7 (7U) /*!< Bit position for DMA_INT_INT7. */ +#define BM_DMA_INT_INT7 (0x00000080U) /*!< Bit mask for DMA_INT_INT7. */ +#define BS_DMA_INT_INT7 (1U) /*!< Bit field size in bits for DMA_INT_INT7. */ + +/*! @brief Read current value of the DMA_INT_INT7 field. */ +#define BR_DMA_INT_INT7(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7)) + +/*! @brief Format value for bitfield DMA_INT_INT7. */ +#define BF_DMA_INT_INT7(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT7) & BM_DMA_INT_INT7) + +/*! @brief Set the INT7 field to a new value. */ +#define BW_DMA_INT_INT7(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT8[8] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT8 (8U) /*!< Bit position for DMA_INT_INT8. */ +#define BM_DMA_INT_INT8 (0x00000100U) /*!< Bit mask for DMA_INT_INT8. */ +#define BS_DMA_INT_INT8 (1U) /*!< Bit field size in bits for DMA_INT_INT8. */ + +/*! @brief Read current value of the DMA_INT_INT8 field. */ +#define BR_DMA_INT_INT8(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8)) + +/*! @brief Format value for bitfield DMA_INT_INT8. */ +#define BF_DMA_INT_INT8(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT8) & BM_DMA_INT_INT8) + +/*! @brief Set the INT8 field to a new value. */ +#define BW_DMA_INT_INT8(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT9[9] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT9 (9U) /*!< Bit position for DMA_INT_INT9. */ +#define BM_DMA_INT_INT9 (0x00000200U) /*!< Bit mask for DMA_INT_INT9. */ +#define BS_DMA_INT_INT9 (1U) /*!< Bit field size in bits for DMA_INT_INT9. */ + +/*! @brief Read current value of the DMA_INT_INT9 field. */ +#define BR_DMA_INT_INT9(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9)) + +/*! @brief Format value for bitfield DMA_INT_INT9. */ +#define BF_DMA_INT_INT9(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT9) & BM_DMA_INT_INT9) + +/*! @brief Set the INT9 field to a new value. */ +#define BW_DMA_INT_INT9(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT10[10] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT10 (10U) /*!< Bit position for DMA_INT_INT10. */ +#define BM_DMA_INT_INT10 (0x00000400U) /*!< Bit mask for DMA_INT_INT10. */ +#define BS_DMA_INT_INT10 (1U) /*!< Bit field size in bits for DMA_INT_INT10. */ + +/*! @brief Read current value of the DMA_INT_INT10 field. */ +#define BR_DMA_INT_INT10(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10)) + +/*! @brief Format value for bitfield DMA_INT_INT10. */ +#define BF_DMA_INT_INT10(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT10) & BM_DMA_INT_INT10) + +/*! @brief Set the INT10 field to a new value. */ +#define BW_DMA_INT_INT10(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT11[11] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT11 (11U) /*!< Bit position for DMA_INT_INT11. */ +#define BM_DMA_INT_INT11 (0x00000800U) /*!< Bit mask for DMA_INT_INT11. */ +#define BS_DMA_INT_INT11 (1U) /*!< Bit field size in bits for DMA_INT_INT11. */ + +/*! @brief Read current value of the DMA_INT_INT11 field. */ +#define BR_DMA_INT_INT11(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11)) + +/*! @brief Format value for bitfield DMA_INT_INT11. */ +#define BF_DMA_INT_INT11(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT11) & BM_DMA_INT_INT11) + +/*! @brief Set the INT11 field to a new value. */ +#define BW_DMA_INT_INT11(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT12[12] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT12 (12U) /*!< Bit position for DMA_INT_INT12. */ +#define BM_DMA_INT_INT12 (0x00001000U) /*!< Bit mask for DMA_INT_INT12. */ +#define BS_DMA_INT_INT12 (1U) /*!< Bit field size in bits for DMA_INT_INT12. */ + +/*! @brief Read current value of the DMA_INT_INT12 field. */ +#define BR_DMA_INT_INT12(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12)) + +/*! @brief Format value for bitfield DMA_INT_INT12. */ +#define BF_DMA_INT_INT12(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT12) & BM_DMA_INT_INT12) + +/*! @brief Set the INT12 field to a new value. */ +#define BW_DMA_INT_INT12(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT13[13] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT13 (13U) /*!< Bit position for DMA_INT_INT13. */ +#define BM_DMA_INT_INT13 (0x00002000U) /*!< Bit mask for DMA_INT_INT13. */ +#define BS_DMA_INT_INT13 (1U) /*!< Bit field size in bits for DMA_INT_INT13. */ + +/*! @brief Read current value of the DMA_INT_INT13 field. */ +#define BR_DMA_INT_INT13(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13)) + +/*! @brief Format value for bitfield DMA_INT_INT13. */ +#define BF_DMA_INT_INT13(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT13) & BM_DMA_INT_INT13) + +/*! @brief Set the INT13 field to a new value. */ +#define BW_DMA_INT_INT13(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT14[14] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT14 (14U) /*!< Bit position for DMA_INT_INT14. */ +#define BM_DMA_INT_INT14 (0x00004000U) /*!< Bit mask for DMA_INT_INT14. */ +#define BS_DMA_INT_INT14 (1U) /*!< Bit field size in bits for DMA_INT_INT14. */ + +/*! @brief Read current value of the DMA_INT_INT14 field. */ +#define BR_DMA_INT_INT14(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14)) + +/*! @brief Format value for bitfield DMA_INT_INT14. */ +#define BF_DMA_INT_INT14(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT14) & BM_DMA_INT_INT14) + +/*! @brief Set the INT14 field to a new value. */ +#define BW_DMA_INT_INT14(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14) = (v)) +/*@}*/ + +/*! + * @name Register DMA_INT, field INT15[15] (W1C) + * + * Values: + * - 0 - The interrupt request for corresponding channel is cleared + * - 1 - The interrupt request for corresponding channel is active + */ +/*@{*/ +#define BP_DMA_INT_INT15 (15U) /*!< Bit position for DMA_INT_INT15. */ +#define BM_DMA_INT_INT15 (0x00008000U) /*!< Bit mask for DMA_INT_INT15. */ +#define BS_DMA_INT_INT15 (1U) /*!< Bit field size in bits for DMA_INT_INT15. */ + +/*! @brief Read current value of the DMA_INT_INT15 field. */ +#define BR_DMA_INT_INT15(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15)) + +/*! @brief Format value for bitfield DMA_INT_INT15. */ +#define BF_DMA_INT_INT15(v) ((uint32_t)((uint32_t)(v) << BP_DMA_INT_INT15) & BM_DMA_INT_INT15) + +/*! @brief Set the INT15 field to a new value. */ +#define BW_DMA_INT_INT15(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_ERR - Error Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_ERR - Error Register (RW) + * + * Reset value: 0x00000000U + * + * The ERR provides a bit map for the 16 channels, signaling the presence of an + * error for each channel. The eDMA engine signals the occurrence of an error + * condition by setting the appropriate bit in this register. The outputs of this + * register are enabled by the contents of the EEI, and then routed to the + * interrupt controller. During the execution of the interrupt-service routine associated + * with any DMA errors, it is software's responsibility to clear the appropriate + * bit, negating the error-interrupt request. Typically, a write to the CERR in + * the interrupt-service routine is used for this purpose. The normal DMA channel + * completion indicators (setting the transfer control descriptor DONE flag and + * the possible assertion of an interrupt request) are not affected when an error + * is detected. The contents of this register can also be polled because a + * non-zero value indicates the presence of a channel error regardless of the state of + * the EEI. The state of any given channel's error indicators is affected by + * writes to this register; it is also affected by writes to the CERR. On writes to + * the ERR, a one in any bit position clears the corresponding channel's error + * status. A zero in any bit position has no affect on the corresponding channel's + * current error status. The CERR is provided so the error indicator for a single + * channel can easily be cleared. + */ +typedef union _hw_dma_err +{ + uint32_t U; + struct _hw_dma_err_bitfields + { + uint32_t ERR0 : 1; /*!< [0] Error In Channel 0 */ + uint32_t ERR1 : 1; /*!< [1] Error In Channel 1 */ + uint32_t ERR2 : 1; /*!< [2] Error In Channel 2 */ + uint32_t ERR3 : 1; /*!< [3] Error In Channel 3 */ + uint32_t ERR4 : 1; /*!< [4] Error In Channel 4 */ + uint32_t ERR5 : 1; /*!< [5] Error In Channel 5 */ + uint32_t ERR6 : 1; /*!< [6] Error In Channel 6 */ + uint32_t ERR7 : 1; /*!< [7] Error In Channel 7 */ + uint32_t ERR8 : 1; /*!< [8] Error In Channel 8 */ + uint32_t ERR9 : 1; /*!< [9] Error In Channel 9 */ + uint32_t ERR10 : 1; /*!< [10] Error In Channel 10 */ + uint32_t ERR11 : 1; /*!< [11] Error In Channel 11 */ + uint32_t ERR12 : 1; /*!< [12] Error In Channel 12 */ + uint32_t ERR13 : 1; /*!< [13] Error In Channel 13 */ + uint32_t ERR14 : 1; /*!< [14] Error In Channel 14 */ + uint32_t ERR15 : 1; /*!< [15] Error In Channel 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_dma_err_t; + +/*! + * @name Constants and macros for entire DMA_ERR register + */ +/*@{*/ +#define HW_DMA_ERR_ADDR(x) ((x) + 0x2CU) + +#define HW_DMA_ERR(x) (*(__IO hw_dma_err_t *) HW_DMA_ERR_ADDR(x)) +#define HW_DMA_ERR_RD(x) (HW_DMA_ERR(x).U) +#define HW_DMA_ERR_WR(x, v) (HW_DMA_ERR(x).U = (v)) +#define HW_DMA_ERR_SET(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) | (v))) +#define HW_DMA_ERR_CLR(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) & ~(v))) +#define HW_DMA_ERR_TOG(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_ERR bitfields + */ + +/*! + * @name Register DMA_ERR, field ERR0[0] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR0 (0U) /*!< Bit position for DMA_ERR_ERR0. */ +#define BM_DMA_ERR_ERR0 (0x00000001U) /*!< Bit mask for DMA_ERR_ERR0. */ +#define BS_DMA_ERR_ERR0 (1U) /*!< Bit field size in bits for DMA_ERR_ERR0. */ + +/*! @brief Read current value of the DMA_ERR_ERR0 field. */ +#define BR_DMA_ERR_ERR0(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0)) + +/*! @brief Format value for bitfield DMA_ERR_ERR0. */ +#define BF_DMA_ERR_ERR0(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR0) & BM_DMA_ERR_ERR0) + +/*! @brief Set the ERR0 field to a new value. */ +#define BW_DMA_ERR_ERR0(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR1[1] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR1 (1U) /*!< Bit position for DMA_ERR_ERR1. */ +#define BM_DMA_ERR_ERR1 (0x00000002U) /*!< Bit mask for DMA_ERR_ERR1. */ +#define BS_DMA_ERR_ERR1 (1U) /*!< Bit field size in bits for DMA_ERR_ERR1. */ + +/*! @brief Read current value of the DMA_ERR_ERR1 field. */ +#define BR_DMA_ERR_ERR1(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1)) + +/*! @brief Format value for bitfield DMA_ERR_ERR1. */ +#define BF_DMA_ERR_ERR1(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR1) & BM_DMA_ERR_ERR1) + +/*! @brief Set the ERR1 field to a new value. */ +#define BW_DMA_ERR_ERR1(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR2[2] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR2 (2U) /*!< Bit position for DMA_ERR_ERR2. */ +#define BM_DMA_ERR_ERR2 (0x00000004U) /*!< Bit mask for DMA_ERR_ERR2. */ +#define BS_DMA_ERR_ERR2 (1U) /*!< Bit field size in bits for DMA_ERR_ERR2. */ + +/*! @brief Read current value of the DMA_ERR_ERR2 field. */ +#define BR_DMA_ERR_ERR2(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2)) + +/*! @brief Format value for bitfield DMA_ERR_ERR2. */ +#define BF_DMA_ERR_ERR2(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR2) & BM_DMA_ERR_ERR2) + +/*! @brief Set the ERR2 field to a new value. */ +#define BW_DMA_ERR_ERR2(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR3[3] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR3 (3U) /*!< Bit position for DMA_ERR_ERR3. */ +#define BM_DMA_ERR_ERR3 (0x00000008U) /*!< Bit mask for DMA_ERR_ERR3. */ +#define BS_DMA_ERR_ERR3 (1U) /*!< Bit field size in bits for DMA_ERR_ERR3. */ + +/*! @brief Read current value of the DMA_ERR_ERR3 field. */ +#define BR_DMA_ERR_ERR3(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3)) + +/*! @brief Format value for bitfield DMA_ERR_ERR3. */ +#define BF_DMA_ERR_ERR3(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR3) & BM_DMA_ERR_ERR3) + +/*! @brief Set the ERR3 field to a new value. */ +#define BW_DMA_ERR_ERR3(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR4[4] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR4 (4U) /*!< Bit position for DMA_ERR_ERR4. */ +#define BM_DMA_ERR_ERR4 (0x00000010U) /*!< Bit mask for DMA_ERR_ERR4. */ +#define BS_DMA_ERR_ERR4 (1U) /*!< Bit field size in bits for DMA_ERR_ERR4. */ + +/*! @brief Read current value of the DMA_ERR_ERR4 field. */ +#define BR_DMA_ERR_ERR4(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4)) + +/*! @brief Format value for bitfield DMA_ERR_ERR4. */ +#define BF_DMA_ERR_ERR4(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR4) & BM_DMA_ERR_ERR4) + +/*! @brief Set the ERR4 field to a new value. */ +#define BW_DMA_ERR_ERR4(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR5[5] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR5 (5U) /*!< Bit position for DMA_ERR_ERR5. */ +#define BM_DMA_ERR_ERR5 (0x00000020U) /*!< Bit mask for DMA_ERR_ERR5. */ +#define BS_DMA_ERR_ERR5 (1U) /*!< Bit field size in bits for DMA_ERR_ERR5. */ + +/*! @brief Read current value of the DMA_ERR_ERR5 field. */ +#define BR_DMA_ERR_ERR5(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5)) + +/*! @brief Format value for bitfield DMA_ERR_ERR5. */ +#define BF_DMA_ERR_ERR5(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR5) & BM_DMA_ERR_ERR5) + +/*! @brief Set the ERR5 field to a new value. */ +#define BW_DMA_ERR_ERR5(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR6[6] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR6 (6U) /*!< Bit position for DMA_ERR_ERR6. */ +#define BM_DMA_ERR_ERR6 (0x00000040U) /*!< Bit mask for DMA_ERR_ERR6. */ +#define BS_DMA_ERR_ERR6 (1U) /*!< Bit field size in bits for DMA_ERR_ERR6. */ + +/*! @brief Read current value of the DMA_ERR_ERR6 field. */ +#define BR_DMA_ERR_ERR6(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6)) + +/*! @brief Format value for bitfield DMA_ERR_ERR6. */ +#define BF_DMA_ERR_ERR6(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR6) & BM_DMA_ERR_ERR6) + +/*! @brief Set the ERR6 field to a new value. */ +#define BW_DMA_ERR_ERR6(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR7[7] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR7 (7U) /*!< Bit position for DMA_ERR_ERR7. */ +#define BM_DMA_ERR_ERR7 (0x00000080U) /*!< Bit mask for DMA_ERR_ERR7. */ +#define BS_DMA_ERR_ERR7 (1U) /*!< Bit field size in bits for DMA_ERR_ERR7. */ + +/*! @brief Read current value of the DMA_ERR_ERR7 field. */ +#define BR_DMA_ERR_ERR7(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7)) + +/*! @brief Format value for bitfield DMA_ERR_ERR7. */ +#define BF_DMA_ERR_ERR7(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR7) & BM_DMA_ERR_ERR7) + +/*! @brief Set the ERR7 field to a new value. */ +#define BW_DMA_ERR_ERR7(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR8[8] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR8 (8U) /*!< Bit position for DMA_ERR_ERR8. */ +#define BM_DMA_ERR_ERR8 (0x00000100U) /*!< Bit mask for DMA_ERR_ERR8. */ +#define BS_DMA_ERR_ERR8 (1U) /*!< Bit field size in bits for DMA_ERR_ERR8. */ + +/*! @brief Read current value of the DMA_ERR_ERR8 field. */ +#define BR_DMA_ERR_ERR8(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8)) + +/*! @brief Format value for bitfield DMA_ERR_ERR8. */ +#define BF_DMA_ERR_ERR8(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR8) & BM_DMA_ERR_ERR8) + +/*! @brief Set the ERR8 field to a new value. */ +#define BW_DMA_ERR_ERR8(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR9[9] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR9 (9U) /*!< Bit position for DMA_ERR_ERR9. */ +#define BM_DMA_ERR_ERR9 (0x00000200U) /*!< Bit mask for DMA_ERR_ERR9. */ +#define BS_DMA_ERR_ERR9 (1U) /*!< Bit field size in bits for DMA_ERR_ERR9. */ + +/*! @brief Read current value of the DMA_ERR_ERR9 field. */ +#define BR_DMA_ERR_ERR9(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9)) + +/*! @brief Format value for bitfield DMA_ERR_ERR9. */ +#define BF_DMA_ERR_ERR9(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR9) & BM_DMA_ERR_ERR9) + +/*! @brief Set the ERR9 field to a new value. */ +#define BW_DMA_ERR_ERR9(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR10[10] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR10 (10U) /*!< Bit position for DMA_ERR_ERR10. */ +#define BM_DMA_ERR_ERR10 (0x00000400U) /*!< Bit mask for DMA_ERR_ERR10. */ +#define BS_DMA_ERR_ERR10 (1U) /*!< Bit field size in bits for DMA_ERR_ERR10. */ + +/*! @brief Read current value of the DMA_ERR_ERR10 field. */ +#define BR_DMA_ERR_ERR10(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10)) + +/*! @brief Format value for bitfield DMA_ERR_ERR10. */ +#define BF_DMA_ERR_ERR10(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR10) & BM_DMA_ERR_ERR10) + +/*! @brief Set the ERR10 field to a new value. */ +#define BW_DMA_ERR_ERR10(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR11[11] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR11 (11U) /*!< Bit position for DMA_ERR_ERR11. */ +#define BM_DMA_ERR_ERR11 (0x00000800U) /*!< Bit mask for DMA_ERR_ERR11. */ +#define BS_DMA_ERR_ERR11 (1U) /*!< Bit field size in bits for DMA_ERR_ERR11. */ + +/*! @brief Read current value of the DMA_ERR_ERR11 field. */ +#define BR_DMA_ERR_ERR11(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11)) + +/*! @brief Format value for bitfield DMA_ERR_ERR11. */ +#define BF_DMA_ERR_ERR11(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR11) & BM_DMA_ERR_ERR11) + +/*! @brief Set the ERR11 field to a new value. */ +#define BW_DMA_ERR_ERR11(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR12[12] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR12 (12U) /*!< Bit position for DMA_ERR_ERR12. */ +#define BM_DMA_ERR_ERR12 (0x00001000U) /*!< Bit mask for DMA_ERR_ERR12. */ +#define BS_DMA_ERR_ERR12 (1U) /*!< Bit field size in bits for DMA_ERR_ERR12. */ + +/*! @brief Read current value of the DMA_ERR_ERR12 field. */ +#define BR_DMA_ERR_ERR12(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12)) + +/*! @brief Format value for bitfield DMA_ERR_ERR12. */ +#define BF_DMA_ERR_ERR12(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR12) & BM_DMA_ERR_ERR12) + +/*! @brief Set the ERR12 field to a new value. */ +#define BW_DMA_ERR_ERR12(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR13[13] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR13 (13U) /*!< Bit position for DMA_ERR_ERR13. */ +#define BM_DMA_ERR_ERR13 (0x00002000U) /*!< Bit mask for DMA_ERR_ERR13. */ +#define BS_DMA_ERR_ERR13 (1U) /*!< Bit field size in bits for DMA_ERR_ERR13. */ + +/*! @brief Read current value of the DMA_ERR_ERR13 field. */ +#define BR_DMA_ERR_ERR13(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13)) + +/*! @brief Format value for bitfield DMA_ERR_ERR13. */ +#define BF_DMA_ERR_ERR13(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR13) & BM_DMA_ERR_ERR13) + +/*! @brief Set the ERR13 field to a new value. */ +#define BW_DMA_ERR_ERR13(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR14[14] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR14 (14U) /*!< Bit position for DMA_ERR_ERR14. */ +#define BM_DMA_ERR_ERR14 (0x00004000U) /*!< Bit mask for DMA_ERR_ERR14. */ +#define BS_DMA_ERR_ERR14 (1U) /*!< Bit field size in bits for DMA_ERR_ERR14. */ + +/*! @brief Read current value of the DMA_ERR_ERR14 field. */ +#define BR_DMA_ERR_ERR14(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14)) + +/*! @brief Format value for bitfield DMA_ERR_ERR14. */ +#define BF_DMA_ERR_ERR14(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR14) & BM_DMA_ERR_ERR14) + +/*! @brief Set the ERR14 field to a new value. */ +#define BW_DMA_ERR_ERR14(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14) = (v)) +/*@}*/ + +/*! + * @name Register DMA_ERR, field ERR15[15] (W1C) + * + * Values: + * - 0 - An error in the corresponding channel has not occurred + * - 1 - An error in the corresponding channel has occurred + */ +/*@{*/ +#define BP_DMA_ERR_ERR15 (15U) /*!< Bit position for DMA_ERR_ERR15. */ +#define BM_DMA_ERR_ERR15 (0x00008000U) /*!< Bit mask for DMA_ERR_ERR15. */ +#define BS_DMA_ERR_ERR15 (1U) /*!< Bit field size in bits for DMA_ERR_ERR15. */ + +/*! @brief Read current value of the DMA_ERR_ERR15 field. */ +#define BR_DMA_ERR_ERR15(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15)) + +/*! @brief Format value for bitfield DMA_ERR_ERR15. */ +#define BF_DMA_ERR_ERR15(v) ((uint32_t)((uint32_t)(v) << BP_DMA_ERR_ERR15) & BM_DMA_ERR_ERR15) + +/*! @brief Set the ERR15 field to a new value. */ +#define BW_DMA_ERR_ERR15(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_HRS - Hardware Request Status Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_HRS - Hardware Request Status Register (RO) + * + * Reset value: 0x00000000U + * + * The HRS register provides a bit map for the DMA channels, signaling the + * presence of a hardware request for each channel. The hardware request status bits + * reflect the current state of the register and qualified (via the ERQ fields) + * DMA request signals as seen by the DMA's arbitration logic. This view into the + * hardware request signals may be used for debug purposes. These bits reflect the + * state of the request as seen by the arbitration logic. Therefore, this status + * is affected by the ERQ bits. + */ +typedef union _hw_dma_hrs +{ + uint32_t U; + struct _hw_dma_hrs_bitfields + { + uint32_t HRS0 : 1; /*!< [0] Hardware Request Status Channel 0 */ + uint32_t HRS1 : 1; /*!< [1] Hardware Request Status Channel 1 */ + uint32_t HRS2 : 1; /*!< [2] Hardware Request Status Channel 2 */ + uint32_t HRS3 : 1; /*!< [3] Hardware Request Status Channel 3 */ + uint32_t HRS4 : 1; /*!< [4] Hardware Request Status Channel 4 */ + uint32_t HRS5 : 1; /*!< [5] Hardware Request Status Channel 5 */ + uint32_t HRS6 : 1; /*!< [6] Hardware Request Status Channel 6 */ + uint32_t HRS7 : 1; /*!< [7] Hardware Request Status Channel 7 */ + uint32_t HRS8 : 1; /*!< [8] Hardware Request Status Channel 8 */ + uint32_t HRS9 : 1; /*!< [9] Hardware Request Status Channel 9 */ + uint32_t HRS10 : 1; /*!< [10] Hardware Request Status Channel 10 */ + uint32_t HRS11 : 1; /*!< [11] Hardware Request Status Channel 11 */ + uint32_t HRS12 : 1; /*!< [12] Hardware Request Status Channel 12 */ + uint32_t HRS13 : 1; /*!< [13] Hardware Request Status Channel 13 */ + uint32_t HRS14 : 1; /*!< [14] Hardware Request Status Channel 14 */ + uint32_t HRS15 : 1; /*!< [15] Hardware Request Status Channel 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] Reserved */ + } B; +} hw_dma_hrs_t; + +/*! + * @name Constants and macros for entire DMA_HRS register + */ +/*@{*/ +#define HW_DMA_HRS_ADDR(x) ((x) + 0x34U) + +#define HW_DMA_HRS(x) (*(__I hw_dma_hrs_t *) HW_DMA_HRS_ADDR(x)) +#define HW_DMA_HRS_RD(x) (HW_DMA_HRS(x).U) +/*@}*/ + +/* + * Constants & macros for individual DMA_HRS bitfields + */ + +/*! + * @name Register DMA_HRS, field HRS0[0] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 0 is not present + * - 1 - A hardware service request for channel 0 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS0 (0U) /*!< Bit position for DMA_HRS_HRS0. */ +#define BM_DMA_HRS_HRS0 (0x00000001U) /*!< Bit mask for DMA_HRS_HRS0. */ +#define BS_DMA_HRS_HRS0 (1U) /*!< Bit field size in bits for DMA_HRS_HRS0. */ + +/*! @brief Read current value of the DMA_HRS_HRS0 field. */ +#define BR_DMA_HRS_HRS0(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS0)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS1[1] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 1 is not present + * - 1 - A hardware service request for channel 1 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS1 (1U) /*!< Bit position for DMA_HRS_HRS1. */ +#define BM_DMA_HRS_HRS1 (0x00000002U) /*!< Bit mask for DMA_HRS_HRS1. */ +#define BS_DMA_HRS_HRS1 (1U) /*!< Bit field size in bits for DMA_HRS_HRS1. */ + +/*! @brief Read current value of the DMA_HRS_HRS1 field. */ +#define BR_DMA_HRS_HRS1(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS1)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS2[2] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 2 is not present + * - 1 - A hardware service request for channel 2 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS2 (2U) /*!< Bit position for DMA_HRS_HRS2. */ +#define BM_DMA_HRS_HRS2 (0x00000004U) /*!< Bit mask for DMA_HRS_HRS2. */ +#define BS_DMA_HRS_HRS2 (1U) /*!< Bit field size in bits for DMA_HRS_HRS2. */ + +/*! @brief Read current value of the DMA_HRS_HRS2 field. */ +#define BR_DMA_HRS_HRS2(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS2)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS3[3] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 3 is not present + * - 1 - A hardware service request for channel 3 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS3 (3U) /*!< Bit position for DMA_HRS_HRS3. */ +#define BM_DMA_HRS_HRS3 (0x00000008U) /*!< Bit mask for DMA_HRS_HRS3. */ +#define BS_DMA_HRS_HRS3 (1U) /*!< Bit field size in bits for DMA_HRS_HRS3. */ + +/*! @brief Read current value of the DMA_HRS_HRS3 field. */ +#define BR_DMA_HRS_HRS3(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS3)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS4[4] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 4 is not present + * - 1 - A hardware service request for channel 4 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS4 (4U) /*!< Bit position for DMA_HRS_HRS4. */ +#define BM_DMA_HRS_HRS4 (0x00000010U) /*!< Bit mask for DMA_HRS_HRS4. */ +#define BS_DMA_HRS_HRS4 (1U) /*!< Bit field size in bits for DMA_HRS_HRS4. */ + +/*! @brief Read current value of the DMA_HRS_HRS4 field. */ +#define BR_DMA_HRS_HRS4(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS4)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS5[5] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 5 is not present + * - 1 - A hardware service request for channel 5 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS5 (5U) /*!< Bit position for DMA_HRS_HRS5. */ +#define BM_DMA_HRS_HRS5 (0x00000020U) /*!< Bit mask for DMA_HRS_HRS5. */ +#define BS_DMA_HRS_HRS5 (1U) /*!< Bit field size in bits for DMA_HRS_HRS5. */ + +/*! @brief Read current value of the DMA_HRS_HRS5 field. */ +#define BR_DMA_HRS_HRS5(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS5)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS6[6] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 6 is not present + * - 1 - A hardware service request for channel 6 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS6 (6U) /*!< Bit position for DMA_HRS_HRS6. */ +#define BM_DMA_HRS_HRS6 (0x00000040U) /*!< Bit mask for DMA_HRS_HRS6. */ +#define BS_DMA_HRS_HRS6 (1U) /*!< Bit field size in bits for DMA_HRS_HRS6. */ + +/*! @brief Read current value of the DMA_HRS_HRS6 field. */ +#define BR_DMA_HRS_HRS6(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS6)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS7[7] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 7 is not present + * - 1 - A hardware service request for channel 7 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS7 (7U) /*!< Bit position for DMA_HRS_HRS7. */ +#define BM_DMA_HRS_HRS7 (0x00000080U) /*!< Bit mask for DMA_HRS_HRS7. */ +#define BS_DMA_HRS_HRS7 (1U) /*!< Bit field size in bits for DMA_HRS_HRS7. */ + +/*! @brief Read current value of the DMA_HRS_HRS7 field. */ +#define BR_DMA_HRS_HRS7(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS7)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS8[8] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 8 is not present + * - 1 - A hardware service request for channel 8 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS8 (8U) /*!< Bit position for DMA_HRS_HRS8. */ +#define BM_DMA_HRS_HRS8 (0x00000100U) /*!< Bit mask for DMA_HRS_HRS8. */ +#define BS_DMA_HRS_HRS8 (1U) /*!< Bit field size in bits for DMA_HRS_HRS8. */ + +/*! @brief Read current value of the DMA_HRS_HRS8 field. */ +#define BR_DMA_HRS_HRS8(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS8)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS9[9] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 9 is not present + * - 1 - A hardware service request for channel 9 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS9 (9U) /*!< Bit position for DMA_HRS_HRS9. */ +#define BM_DMA_HRS_HRS9 (0x00000200U) /*!< Bit mask for DMA_HRS_HRS9. */ +#define BS_DMA_HRS_HRS9 (1U) /*!< Bit field size in bits for DMA_HRS_HRS9. */ + +/*! @brief Read current value of the DMA_HRS_HRS9 field. */ +#define BR_DMA_HRS_HRS9(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS9)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS10[10] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 10 is not present + * - 1 - A hardware service request for channel 10 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS10 (10U) /*!< Bit position for DMA_HRS_HRS10. */ +#define BM_DMA_HRS_HRS10 (0x00000400U) /*!< Bit mask for DMA_HRS_HRS10. */ +#define BS_DMA_HRS_HRS10 (1U) /*!< Bit field size in bits for DMA_HRS_HRS10. */ + +/*! @brief Read current value of the DMA_HRS_HRS10 field. */ +#define BR_DMA_HRS_HRS10(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS10)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS11[11] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 11 is not present + * - 1 - A hardware service request for channel 11 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS11 (11U) /*!< Bit position for DMA_HRS_HRS11. */ +#define BM_DMA_HRS_HRS11 (0x00000800U) /*!< Bit mask for DMA_HRS_HRS11. */ +#define BS_DMA_HRS_HRS11 (1U) /*!< Bit field size in bits for DMA_HRS_HRS11. */ + +/*! @brief Read current value of the DMA_HRS_HRS11 field. */ +#define BR_DMA_HRS_HRS11(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS11)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS12[12] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 12 is not present + * - 1 - A hardware service request for channel 12 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS12 (12U) /*!< Bit position for DMA_HRS_HRS12. */ +#define BM_DMA_HRS_HRS12 (0x00001000U) /*!< Bit mask for DMA_HRS_HRS12. */ +#define BS_DMA_HRS_HRS12 (1U) /*!< Bit field size in bits for DMA_HRS_HRS12. */ + +/*! @brief Read current value of the DMA_HRS_HRS12 field. */ +#define BR_DMA_HRS_HRS12(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS12)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS13[13] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 13 is not present + * - 1 - A hardware service request for channel 13 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS13 (13U) /*!< Bit position for DMA_HRS_HRS13. */ +#define BM_DMA_HRS_HRS13 (0x00002000U) /*!< Bit mask for DMA_HRS_HRS13. */ +#define BS_DMA_HRS_HRS13 (1U) /*!< Bit field size in bits for DMA_HRS_HRS13. */ + +/*! @brief Read current value of the DMA_HRS_HRS13 field. */ +#define BR_DMA_HRS_HRS13(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS13)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS14[14] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 14 is not present + * - 1 - A hardware service request for channel 14 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS14 (14U) /*!< Bit position for DMA_HRS_HRS14. */ +#define BM_DMA_HRS_HRS14 (0x00004000U) /*!< Bit mask for DMA_HRS_HRS14. */ +#define BS_DMA_HRS_HRS14 (1U) /*!< Bit field size in bits for DMA_HRS_HRS14. */ + +/*! @brief Read current value of the DMA_HRS_HRS14 field. */ +#define BR_DMA_HRS_HRS14(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS14)) +/*@}*/ + +/*! + * @name Register DMA_HRS, field HRS15[15] (RO) + * + * The HRS bit for its respective channel remains asserted for the period when a + * Hardware Request is Present on the Channel. After the Request is completed + * and Channel is free , the HRS bit is automatically cleared by hardware. + * + * Values: + * - 0 - A hardware service request for channel 15 is not present + * - 1 - A hardware service request for channel 15 is present + */ +/*@{*/ +#define BP_DMA_HRS_HRS15 (15U) /*!< Bit position for DMA_HRS_HRS15. */ +#define BM_DMA_HRS_HRS15 (0x00008000U) /*!< Bit mask for DMA_HRS_HRS15. */ +#define BS_DMA_HRS_HRS15 (1U) /*!< Bit field size in bits for DMA_HRS_HRS15. */ + +/*! @brief Read current value of the DMA_HRS_HRS15 field. */ +#define BR_DMA_HRS_HRS15(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS15)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_EARS - Enable Asynchronous Request in Stop Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_EARS - Enable Asynchronous Request in Stop Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_dma_ears +{ + uint32_t U; + struct _hw_dma_ears_bitfields + { + uint32_t EDREQ_0 : 1; /*!< [0] Enable asynchronous DMA request in + * stop for channel 0. */ + uint32_t EDREQ_1 : 1; /*!< [1] Enable asynchronous DMA request in + * stop for channel 1. */ + uint32_t EDREQ_2 : 1; /*!< [2] Enable asynchronous DMA request in + * stop for channel 2. */ + uint32_t EDREQ_3 : 1; /*!< [3] Enable asynchronous DMA request in + * stop for channel 3. */ + uint32_t EDREQ_4 : 1; /*!< [4] Enable asynchronous DMA request in + * stop for channel 4 */ + uint32_t EDREQ_5 : 1; /*!< [5] Enable asynchronous DMA request in + * stop for channel 5 */ + uint32_t EDREQ_6 : 1; /*!< [6] Enable asynchronous DMA request in + * stop for channel 6 */ + uint32_t EDREQ_7 : 1; /*!< [7] Enable asynchronous DMA request in + * stop for channel 7 */ + uint32_t EDREQ_8 : 1; /*!< [8] Enable asynchronous DMA request in + * stop for channel 8 */ + uint32_t EDREQ_9 : 1; /*!< [9] Enable asynchronous DMA request in + * stop for channel 9 */ + uint32_t EDREQ_10 : 1; /*!< [10] Enable asynchronous DMA request in + * stop for channel 10 */ + uint32_t EDREQ_11 : 1; /*!< [11] Enable asynchronous DMA request in + * stop for channel 11 */ + uint32_t EDREQ_12 : 1; /*!< [12] Enable asynchronous DMA request in + * stop for channel 12 */ + uint32_t EDREQ_13 : 1; /*!< [13] Enable asynchronous DMA request in + * stop for channel 13 */ + uint32_t EDREQ_14 : 1; /*!< [14] Enable asynchronous DMA request in + * stop for channel 14 */ + uint32_t EDREQ_15 : 1; /*!< [15] Enable asynchronous DMA request in + * stop for channel 15 */ + uint32_t RESERVED0 : 16; /*!< [31:16] Reserved. */ + } B; +} hw_dma_ears_t; + +/*! + * @name Constants and macros for entire DMA_EARS register + */ +/*@{*/ +#define HW_DMA_EARS_ADDR(x) ((x) + 0x44U) + +#define HW_DMA_EARS(x) (*(__IO hw_dma_ears_t *) HW_DMA_EARS_ADDR(x)) +#define HW_DMA_EARS_RD(x) (HW_DMA_EARS(x).U) +#define HW_DMA_EARS_WR(x, v) (HW_DMA_EARS(x).U = (v)) +#define HW_DMA_EARS_SET(x, v) (HW_DMA_EARS_WR(x, HW_DMA_EARS_RD(x) | (v))) +#define HW_DMA_EARS_CLR(x, v) (HW_DMA_EARS_WR(x, HW_DMA_EARS_RD(x) & ~(v))) +#define HW_DMA_EARS_TOG(x, v) (HW_DMA_EARS_WR(x, HW_DMA_EARS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_EARS bitfields + */ + +/*! + * @name Register DMA_EARS, field EDREQ_0[0] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 0. + * - 1 - Enable asynchronous DMA request for channel 0. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_0 (0U) /*!< Bit position for DMA_EARS_EDREQ_0. */ +#define BM_DMA_EARS_EDREQ_0 (0x00000001U) /*!< Bit mask for DMA_EARS_EDREQ_0. */ +#define BS_DMA_EARS_EDREQ_0 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_0. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_0 field. */ +#define BR_DMA_EARS_EDREQ_0(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_0)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_0. */ +#define BF_DMA_EARS_EDREQ_0(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_0) & BM_DMA_EARS_EDREQ_0) + +/*! @brief Set the EDREQ_0 field to a new value. */ +#define BW_DMA_EARS_EDREQ_0(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_0) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_1[1] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 1 + * - 1 - Enable asynchronous DMA request for channel 1. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_1 (1U) /*!< Bit position for DMA_EARS_EDREQ_1. */ +#define BM_DMA_EARS_EDREQ_1 (0x00000002U) /*!< Bit mask for DMA_EARS_EDREQ_1. */ +#define BS_DMA_EARS_EDREQ_1 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_1. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_1 field. */ +#define BR_DMA_EARS_EDREQ_1(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_1)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_1. */ +#define BF_DMA_EARS_EDREQ_1(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_1) & BM_DMA_EARS_EDREQ_1) + +/*! @brief Set the EDREQ_1 field to a new value. */ +#define BW_DMA_EARS_EDREQ_1(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_1) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_2[2] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 2. + * - 1 - Enable asynchronous DMA request for channel 2. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_2 (2U) /*!< Bit position for DMA_EARS_EDREQ_2. */ +#define BM_DMA_EARS_EDREQ_2 (0x00000004U) /*!< Bit mask for DMA_EARS_EDREQ_2. */ +#define BS_DMA_EARS_EDREQ_2 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_2. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_2 field. */ +#define BR_DMA_EARS_EDREQ_2(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_2)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_2. */ +#define BF_DMA_EARS_EDREQ_2(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_2) & BM_DMA_EARS_EDREQ_2) + +/*! @brief Set the EDREQ_2 field to a new value. */ +#define BW_DMA_EARS_EDREQ_2(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_2) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_3[3] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 3. + * - 1 - Enable asynchronous DMA request for channel 3. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_3 (3U) /*!< Bit position for DMA_EARS_EDREQ_3. */ +#define BM_DMA_EARS_EDREQ_3 (0x00000008U) /*!< Bit mask for DMA_EARS_EDREQ_3. */ +#define BS_DMA_EARS_EDREQ_3 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_3. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_3 field. */ +#define BR_DMA_EARS_EDREQ_3(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_3)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_3. */ +#define BF_DMA_EARS_EDREQ_3(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_3) & BM_DMA_EARS_EDREQ_3) + +/*! @brief Set the EDREQ_3 field to a new value. */ +#define BW_DMA_EARS_EDREQ_3(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_3) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_4[4] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 4. + * - 1 - Enable asynchronous DMA request for channel 4. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_4 (4U) /*!< Bit position for DMA_EARS_EDREQ_4. */ +#define BM_DMA_EARS_EDREQ_4 (0x00000010U) /*!< Bit mask for DMA_EARS_EDREQ_4. */ +#define BS_DMA_EARS_EDREQ_4 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_4. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_4 field. */ +#define BR_DMA_EARS_EDREQ_4(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_4)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_4. */ +#define BF_DMA_EARS_EDREQ_4(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_4) & BM_DMA_EARS_EDREQ_4) + +/*! @brief Set the EDREQ_4 field to a new value. */ +#define BW_DMA_EARS_EDREQ_4(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_4) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_5[5] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 5. + * - 1 - Enable asynchronous DMA request for channel 5. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_5 (5U) /*!< Bit position for DMA_EARS_EDREQ_5. */ +#define BM_DMA_EARS_EDREQ_5 (0x00000020U) /*!< Bit mask for DMA_EARS_EDREQ_5. */ +#define BS_DMA_EARS_EDREQ_5 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_5. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_5 field. */ +#define BR_DMA_EARS_EDREQ_5(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_5)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_5. */ +#define BF_DMA_EARS_EDREQ_5(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_5) & BM_DMA_EARS_EDREQ_5) + +/*! @brief Set the EDREQ_5 field to a new value. */ +#define BW_DMA_EARS_EDREQ_5(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_5) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_6[6] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 6. + * - 1 - Enable asynchronous DMA request for channel 6. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_6 (6U) /*!< Bit position for DMA_EARS_EDREQ_6. */ +#define BM_DMA_EARS_EDREQ_6 (0x00000040U) /*!< Bit mask for DMA_EARS_EDREQ_6. */ +#define BS_DMA_EARS_EDREQ_6 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_6. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_6 field. */ +#define BR_DMA_EARS_EDREQ_6(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_6)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_6. */ +#define BF_DMA_EARS_EDREQ_6(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_6) & BM_DMA_EARS_EDREQ_6) + +/*! @brief Set the EDREQ_6 field to a new value. */ +#define BW_DMA_EARS_EDREQ_6(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_6) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_7[7] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 7. + * - 1 - Enable asynchronous DMA request for channel 7. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_7 (7U) /*!< Bit position for DMA_EARS_EDREQ_7. */ +#define BM_DMA_EARS_EDREQ_7 (0x00000080U) /*!< Bit mask for DMA_EARS_EDREQ_7. */ +#define BS_DMA_EARS_EDREQ_7 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_7. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_7 field. */ +#define BR_DMA_EARS_EDREQ_7(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_7)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_7. */ +#define BF_DMA_EARS_EDREQ_7(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_7) & BM_DMA_EARS_EDREQ_7) + +/*! @brief Set the EDREQ_7 field to a new value. */ +#define BW_DMA_EARS_EDREQ_7(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_7) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_8[8] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 8. + * - 1 - Enable asynchronous DMA request for channel 8. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_8 (8U) /*!< Bit position for DMA_EARS_EDREQ_8. */ +#define BM_DMA_EARS_EDREQ_8 (0x00000100U) /*!< Bit mask for DMA_EARS_EDREQ_8. */ +#define BS_DMA_EARS_EDREQ_8 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_8. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_8 field. */ +#define BR_DMA_EARS_EDREQ_8(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_8)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_8. */ +#define BF_DMA_EARS_EDREQ_8(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_8) & BM_DMA_EARS_EDREQ_8) + +/*! @brief Set the EDREQ_8 field to a new value. */ +#define BW_DMA_EARS_EDREQ_8(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_8) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_9[9] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 9. + * - 1 - Enable asynchronous DMA request for channel 9. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_9 (9U) /*!< Bit position for DMA_EARS_EDREQ_9. */ +#define BM_DMA_EARS_EDREQ_9 (0x00000200U) /*!< Bit mask for DMA_EARS_EDREQ_9. */ +#define BS_DMA_EARS_EDREQ_9 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_9. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_9 field. */ +#define BR_DMA_EARS_EDREQ_9(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_9)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_9. */ +#define BF_DMA_EARS_EDREQ_9(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_9) & BM_DMA_EARS_EDREQ_9) + +/*! @brief Set the EDREQ_9 field to a new value. */ +#define BW_DMA_EARS_EDREQ_9(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_9) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_10[10] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 10. + * - 1 - Enable asynchronous DMA request for channel 10. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_10 (10U) /*!< Bit position for DMA_EARS_EDREQ_10. */ +#define BM_DMA_EARS_EDREQ_10 (0x00000400U) /*!< Bit mask for DMA_EARS_EDREQ_10. */ +#define BS_DMA_EARS_EDREQ_10 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_10. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_10 field. */ +#define BR_DMA_EARS_EDREQ_10(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_10)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_10. */ +#define BF_DMA_EARS_EDREQ_10(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_10) & BM_DMA_EARS_EDREQ_10) + +/*! @brief Set the EDREQ_10 field to a new value. */ +#define BW_DMA_EARS_EDREQ_10(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_10) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_11[11] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 11. + * - 1 - Enable asynchronous DMA request for channel 11. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_11 (11U) /*!< Bit position for DMA_EARS_EDREQ_11. */ +#define BM_DMA_EARS_EDREQ_11 (0x00000800U) /*!< Bit mask for DMA_EARS_EDREQ_11. */ +#define BS_DMA_EARS_EDREQ_11 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_11. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_11 field. */ +#define BR_DMA_EARS_EDREQ_11(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_11)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_11. */ +#define BF_DMA_EARS_EDREQ_11(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_11) & BM_DMA_EARS_EDREQ_11) + +/*! @brief Set the EDREQ_11 field to a new value. */ +#define BW_DMA_EARS_EDREQ_11(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_11) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_12[12] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 12. + * - 1 - Enable asynchronous DMA request for channel 12. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_12 (12U) /*!< Bit position for DMA_EARS_EDREQ_12. */ +#define BM_DMA_EARS_EDREQ_12 (0x00001000U) /*!< Bit mask for DMA_EARS_EDREQ_12. */ +#define BS_DMA_EARS_EDREQ_12 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_12. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_12 field. */ +#define BR_DMA_EARS_EDREQ_12(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_12)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_12. */ +#define BF_DMA_EARS_EDREQ_12(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_12) & BM_DMA_EARS_EDREQ_12) + +/*! @brief Set the EDREQ_12 field to a new value. */ +#define BW_DMA_EARS_EDREQ_12(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_12) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_13[13] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 13. + * - 1 - Enable asynchronous DMA request for channel 13. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_13 (13U) /*!< Bit position for DMA_EARS_EDREQ_13. */ +#define BM_DMA_EARS_EDREQ_13 (0x00002000U) /*!< Bit mask for DMA_EARS_EDREQ_13. */ +#define BS_DMA_EARS_EDREQ_13 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_13. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_13 field. */ +#define BR_DMA_EARS_EDREQ_13(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_13)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_13. */ +#define BF_DMA_EARS_EDREQ_13(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_13) & BM_DMA_EARS_EDREQ_13) + +/*! @brief Set the EDREQ_13 field to a new value. */ +#define BW_DMA_EARS_EDREQ_13(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_13) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_14[14] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 14. + * - 1 - Enable asynchronous DMA request for channel 14. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_14 (14U) /*!< Bit position for DMA_EARS_EDREQ_14. */ +#define BM_DMA_EARS_EDREQ_14 (0x00004000U) /*!< Bit mask for DMA_EARS_EDREQ_14. */ +#define BS_DMA_EARS_EDREQ_14 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_14. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_14 field. */ +#define BR_DMA_EARS_EDREQ_14(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_14)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_14. */ +#define BF_DMA_EARS_EDREQ_14(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_14) & BM_DMA_EARS_EDREQ_14) + +/*! @brief Set the EDREQ_14 field to a new value. */ +#define BW_DMA_EARS_EDREQ_14(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_14) = (v)) +/*@}*/ + +/*! + * @name Register DMA_EARS, field EDREQ_15[15] (RW) + * + * Values: + * - 0 - Disable asynchronous DMA request for channel 15. + * - 1 - Enable asynchronous DMA request for channel 15. + */ +/*@{*/ +#define BP_DMA_EARS_EDREQ_15 (15U) /*!< Bit position for DMA_EARS_EDREQ_15. */ +#define BM_DMA_EARS_EDREQ_15 (0x00008000U) /*!< Bit mask for DMA_EARS_EDREQ_15. */ +#define BS_DMA_EARS_EDREQ_15 (1U) /*!< Bit field size in bits for DMA_EARS_EDREQ_15. */ + +/*! @brief Read current value of the DMA_EARS_EDREQ_15 field. */ +#define BR_DMA_EARS_EDREQ_15(x) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_15)) + +/*! @brief Format value for bitfield DMA_EARS_EDREQ_15. */ +#define BF_DMA_EARS_EDREQ_15(v) ((uint32_t)((uint32_t)(v) << BP_DMA_EARS_EDREQ_15) & BM_DMA_EARS_EDREQ_15) + +/*! @brief Set the EDREQ_15 field to a new value. */ +#define BW_DMA_EARS_EDREQ_15(x, v) (BITBAND_ACCESS32(HW_DMA_EARS_ADDR(x), BP_DMA_EARS_EDREQ_15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_DCHPRIn - Channel n Priority Register + ******************************************************************************/ + +/*! + * @brief HW_DMA_DCHPRIn - Channel n Priority Register (RW) + * + * Reset value: 0x00U + * + * When fixed-priority channel arbitration is enabled (CR[ERCA] = 0), the + * contents of these registers define the unique priorities associated with each + * channel . The channel priorities are evaluated by numeric value; for example, 0 is + * the lowest priority, 1 is the next priority, then 2, 3, etc. Software must + * program the channel priorities with unique values; otherwise, a configuration + * error is reported. The range of the priority value is limited to the values of 0 + * through 15. + */ +typedef union _hw_dma_dchprin +{ + uint8_t U; + struct _hw_dma_dchprin_bitfields + { + uint8_t CHPRI : 4; /*!< [3:0] Channel n Arbitration Priority */ + uint8_t RESERVED0 : 2; /*!< [5:4] */ + uint8_t DPA : 1; /*!< [6] Disable Preempt Ability */ + uint8_t ECP : 1; /*!< [7] Enable Channel Preemption */ + } B; +} hw_dma_dchprin_t; + +/*! + * @name Constants and macros for entire DMA_DCHPRIn register + */ +/*@{*/ +#define HW_DMA_DCHPRIn_COUNT (16U) + +#define HW_DMA_DCHPRIn_ADDR(x, n) ((x) + 0x100U + (0x1U * (n))) + +/* DMA channel index to DMA channel priority register array index conversion macro */ +#define HW_DMA_DCHPRIn_CHANNEL(n) (((n) & ~0x03U) | (3 - ((n) & 0x03U))) + +#define HW_DMA_DCHPRIn(x, n) (*(__IO hw_dma_dchprin_t *) HW_DMA_DCHPRIn_ADDR(x, n)) +#define HW_DMA_DCHPRIn_RD(x, n) (HW_DMA_DCHPRIn(x, n).U) +#define HW_DMA_DCHPRIn_WR(x, n, v) (HW_DMA_DCHPRIn(x, n).U = (v)) +#define HW_DMA_DCHPRIn_SET(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) | (v))) +#define HW_DMA_DCHPRIn_CLR(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) & ~(v))) +#define HW_DMA_DCHPRIn_TOG(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_DCHPRIn bitfields + */ + +/*! + * @name Register DMA_DCHPRIn, field CHPRI[3:0] (RW) + * + * Channel priority when fixed-priority arbitration is enabled Reset value for + * the channel priority fields, CHPRI, is equal to the corresponding channel + * number for each priority register, i.e., DCHPRI15[CHPRI] equals 0b1111. + */ +/*@{*/ +#define BP_DMA_DCHPRIn_CHPRI (0U) /*!< Bit position for DMA_DCHPRIn_CHPRI. */ +#define BM_DMA_DCHPRIn_CHPRI (0x0FU) /*!< Bit mask for DMA_DCHPRIn_CHPRI. */ +#define BS_DMA_DCHPRIn_CHPRI (4U) /*!< Bit field size in bits for DMA_DCHPRIn_CHPRI. */ + +/*! @brief Read current value of the DMA_DCHPRIn_CHPRI field. */ +#define BR_DMA_DCHPRIn_CHPRI(x, n) (HW_DMA_DCHPRIn(x, n).B.CHPRI) + +/*! @brief Format value for bitfield DMA_DCHPRIn_CHPRI. */ +#define BF_DMA_DCHPRIn_CHPRI(v) ((uint8_t)((uint8_t)(v) << BP_DMA_DCHPRIn_CHPRI) & BM_DMA_DCHPRIn_CHPRI) + +/*! @brief Set the CHPRI field to a new value. */ +#define BW_DMA_DCHPRIn_CHPRI(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, (HW_DMA_DCHPRIn_RD(x, n) & ~BM_DMA_DCHPRIn_CHPRI) | BF_DMA_DCHPRIn_CHPRI(v))) +/*@}*/ + +/*! + * @name Register DMA_DCHPRIn, field DPA[6] (RW) + * + * Values: + * - 0 - Channel n can suspend a lower priority channel + * - 1 - Channel n cannot suspend any channel, regardless of channel priority + */ +/*@{*/ +#define BP_DMA_DCHPRIn_DPA (6U) /*!< Bit position for DMA_DCHPRIn_DPA. */ +#define BM_DMA_DCHPRIn_DPA (0x40U) /*!< Bit mask for DMA_DCHPRIn_DPA. */ +#define BS_DMA_DCHPRIn_DPA (1U) /*!< Bit field size in bits for DMA_DCHPRIn_DPA. */ + +/*! @brief Read current value of the DMA_DCHPRIn_DPA field. */ +#define BR_DMA_DCHPRIn_DPA(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA)) + +/*! @brief Format value for bitfield DMA_DCHPRIn_DPA. */ +#define BF_DMA_DCHPRIn_DPA(v) ((uint8_t)((uint8_t)(v) << BP_DMA_DCHPRIn_DPA) & BM_DMA_DCHPRIn_DPA) + +/*! @brief Set the DPA field to a new value. */ +#define BW_DMA_DCHPRIn_DPA(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA) = (v)) +/*@}*/ + +/*! + * @name Register DMA_DCHPRIn, field ECP[7] (RW) + * + * Values: + * - 0 - Channel n cannot be suspended by a higher priority channel's service + * request + * - 1 - Channel n can be temporarily suspended by the service request of a + * higher priority channel + */ +/*@{*/ +#define BP_DMA_DCHPRIn_ECP (7U) /*!< Bit position for DMA_DCHPRIn_ECP. */ +#define BM_DMA_DCHPRIn_ECP (0x80U) /*!< Bit mask for DMA_DCHPRIn_ECP. */ +#define BS_DMA_DCHPRIn_ECP (1U) /*!< Bit field size in bits for DMA_DCHPRIn_ECP. */ + +/*! @brief Read current value of the DMA_DCHPRIn_ECP field. */ +#define BR_DMA_DCHPRIn_ECP(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP)) + +/*! @brief Format value for bitfield DMA_DCHPRIn_ECP. */ +#define BF_DMA_DCHPRIn_ECP(v) ((uint8_t)((uint8_t)(v) << BP_DMA_DCHPRIn_ECP) & BM_DMA_DCHPRIn_ECP) + +/*! @brief Set the ECP field to a new value. */ +#define BW_DMA_DCHPRIn_ECP(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_DMA_TCDn_SADDR - TCD Source Address + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_SADDR - TCD Source Address (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_dma_tcdn_saddr +{ + uint32_t U; + struct _hw_dma_tcdn_saddr_bitfields + { + uint32_t SADDR : 32; /*!< [31:0] Source Address */ + } B; +} hw_dma_tcdn_saddr_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_SADDR register + */ +/*@{*/ +#define HW_DMA_TCDn_SADDR_COUNT (16U) + +#define HW_DMA_TCDn_SADDR_ADDR(x, n) ((x) + 0x1000U + (0x20U * (n))) + +#define HW_DMA_TCDn_SADDR(x, n) (*(__IO hw_dma_tcdn_saddr_t *) HW_DMA_TCDn_SADDR_ADDR(x, n)) +#define HW_DMA_TCDn_SADDR_RD(x, n) (HW_DMA_TCDn_SADDR(x, n).U) +#define HW_DMA_TCDn_SADDR_WR(x, n, v) (HW_DMA_TCDn_SADDR(x, n).U = (v)) +#define HW_DMA_TCDn_SADDR_SET(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) | (v))) +#define HW_DMA_TCDn_SADDR_CLR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_SADDR_TOG(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_SADDR bitfields + */ + +/*! + * @name Register DMA_TCDn_SADDR, field SADDR[31:0] (RW) + * + * Memory address pointing to the source data. + */ +/*@{*/ +#define BP_DMA_TCDn_SADDR_SADDR (0U) /*!< Bit position for DMA_TCDn_SADDR_SADDR. */ +#define BM_DMA_TCDn_SADDR_SADDR (0xFFFFFFFFU) /*!< Bit mask for DMA_TCDn_SADDR_SADDR. */ +#define BS_DMA_TCDn_SADDR_SADDR (32U) /*!< Bit field size in bits for DMA_TCDn_SADDR_SADDR. */ + +/*! @brief Read current value of the DMA_TCDn_SADDR_SADDR field. */ +#define BR_DMA_TCDn_SADDR_SADDR(x, n) (HW_DMA_TCDn_SADDR(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_SADDR_SADDR. */ +#define BF_DMA_TCDn_SADDR_SADDR(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_SADDR_SADDR) & BM_DMA_TCDn_SADDR_SADDR) + +/*! @brief Set the SADDR field to a new value. */ +#define BW_DMA_TCDn_SADDR_SADDR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_dma_tcdn_soff +{ + uint16_t U; + struct _hw_dma_tcdn_soff_bitfields + { + uint16_t SOFF : 16; /*!< [15:0] Source address signed offset */ + } B; +} hw_dma_tcdn_soff_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_SOFF register + */ +/*@{*/ +#define HW_DMA_TCDn_SOFF_COUNT (16U) + +#define HW_DMA_TCDn_SOFF_ADDR(x, n) ((x) + 0x1004U + (0x20U * (n))) + +#define HW_DMA_TCDn_SOFF(x, n) (*(__IO hw_dma_tcdn_soff_t *) HW_DMA_TCDn_SOFF_ADDR(x, n)) +#define HW_DMA_TCDn_SOFF_RD(x, n) (HW_DMA_TCDn_SOFF(x, n).U) +#define HW_DMA_TCDn_SOFF_WR(x, n, v) (HW_DMA_TCDn_SOFF(x, n).U = (v)) +#define HW_DMA_TCDn_SOFF_SET(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) | (v))) +#define HW_DMA_TCDn_SOFF_CLR(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_SOFF_TOG(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_SOFF bitfields + */ + +/*! + * @name Register DMA_TCDn_SOFF, field SOFF[15:0] (RW) + * + * Sign-extended offset applied to the current source address to form the + * next-state value as each source read is completed. + */ +/*@{*/ +#define BP_DMA_TCDn_SOFF_SOFF (0U) /*!< Bit position for DMA_TCDn_SOFF_SOFF. */ +#define BM_DMA_TCDn_SOFF_SOFF (0xFFFFU) /*!< Bit mask for DMA_TCDn_SOFF_SOFF. */ +#define BS_DMA_TCDn_SOFF_SOFF (16U) /*!< Bit field size in bits for DMA_TCDn_SOFF_SOFF. */ + +/*! @brief Read current value of the DMA_TCDn_SOFF_SOFF field. */ +#define BR_DMA_TCDn_SOFF_SOFF(x, n) (HW_DMA_TCDn_SOFF(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_SOFF_SOFF. */ +#define BF_DMA_TCDn_SOFF_SOFF(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_SOFF_SOFF) & BM_DMA_TCDn_SOFF_SOFF) + +/*! @brief Set the SOFF field to a new value. */ +#define BW_DMA_TCDn_SOFF_SOFF(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_ATTR - TCD Transfer Attributes + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_ATTR - TCD Transfer Attributes (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_dma_tcdn_attr +{ + uint16_t U; + struct _hw_dma_tcdn_attr_bitfields + { + uint16_t DSIZE : 3; /*!< [2:0] Destination Data Transfer Size */ + uint16_t DMOD : 5; /*!< [7:3] Destination Address Modulo */ + uint16_t SSIZE : 3; /*!< [10:8] Source data transfer size */ + uint16_t SMOD : 5; /*!< [15:11] Source Address Modulo. */ + } B; +} hw_dma_tcdn_attr_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_ATTR register + */ +/*@{*/ +#define HW_DMA_TCDn_ATTR_COUNT (16U) + +#define HW_DMA_TCDn_ATTR_ADDR(x, n) ((x) + 0x1006U + (0x20U * (n))) + +#define HW_DMA_TCDn_ATTR(x, n) (*(__IO hw_dma_tcdn_attr_t *) HW_DMA_TCDn_ATTR_ADDR(x, n)) +#define HW_DMA_TCDn_ATTR_RD(x, n) (HW_DMA_TCDn_ATTR(x, n).U) +#define HW_DMA_TCDn_ATTR_WR(x, n, v) (HW_DMA_TCDn_ATTR(x, n).U = (v)) +#define HW_DMA_TCDn_ATTR_SET(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) | (v))) +#define HW_DMA_TCDn_ATTR_CLR(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_ATTR_TOG(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_ATTR bitfields + */ + +/*! + * @name Register DMA_TCDn_ATTR, field DSIZE[2:0] (RW) + * + * See the SSIZE definition + */ +/*@{*/ +#define BP_DMA_TCDn_ATTR_DSIZE (0U) /*!< Bit position for DMA_TCDn_ATTR_DSIZE. */ +#define BM_DMA_TCDn_ATTR_DSIZE (0x0007U) /*!< Bit mask for DMA_TCDn_ATTR_DSIZE. */ +#define BS_DMA_TCDn_ATTR_DSIZE (3U) /*!< Bit field size in bits for DMA_TCDn_ATTR_DSIZE. */ + +/*! @brief Read current value of the DMA_TCDn_ATTR_DSIZE field. */ +#define BR_DMA_TCDn_ATTR_DSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DSIZE) + +/*! @brief Format value for bitfield DMA_TCDn_ATTR_DSIZE. */ +#define BF_DMA_TCDn_ATTR_DSIZE(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_ATTR_DSIZE) & BM_DMA_TCDn_ATTR_DSIZE) + +/*! @brief Set the DSIZE field to a new value. */ +#define BW_DMA_TCDn_ATTR_DSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DSIZE) | BF_DMA_TCDn_ATTR_DSIZE(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_ATTR, field DMOD[7:3] (RW) + * + * See the SMOD definition + */ +/*@{*/ +#define BP_DMA_TCDn_ATTR_DMOD (3U) /*!< Bit position for DMA_TCDn_ATTR_DMOD. */ +#define BM_DMA_TCDn_ATTR_DMOD (0x00F8U) /*!< Bit mask for DMA_TCDn_ATTR_DMOD. */ +#define BS_DMA_TCDn_ATTR_DMOD (5U) /*!< Bit field size in bits for DMA_TCDn_ATTR_DMOD. */ + +/*! @brief Read current value of the DMA_TCDn_ATTR_DMOD field. */ +#define BR_DMA_TCDn_ATTR_DMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DMOD) + +/*! @brief Format value for bitfield DMA_TCDn_ATTR_DMOD. */ +#define BF_DMA_TCDn_ATTR_DMOD(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_ATTR_DMOD) & BM_DMA_TCDn_ATTR_DMOD) + +/*! @brief Set the DMOD field to a new value. */ +#define BW_DMA_TCDn_ATTR_DMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DMOD) | BF_DMA_TCDn_ATTR_DMOD(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_ATTR, field SSIZE[10:8] (RW) + * + * The attempted use of a Reserved encoding causes a configuration error. + * + * Values: + * - 000 - 8-bit + * - 001 - 16-bit + * - 010 - 32-bit + * - 011 - Reserved + * - 100 - 16-byte + * - 101 - 32-byte + * - 110 - Reserved + * - 111 - Reserved + */ +/*@{*/ +#define BP_DMA_TCDn_ATTR_SSIZE (8U) /*!< Bit position for DMA_TCDn_ATTR_SSIZE. */ +#define BM_DMA_TCDn_ATTR_SSIZE (0x0700U) /*!< Bit mask for DMA_TCDn_ATTR_SSIZE. */ +#define BS_DMA_TCDn_ATTR_SSIZE (3U) /*!< Bit field size in bits for DMA_TCDn_ATTR_SSIZE. */ + +/*! @brief Read current value of the DMA_TCDn_ATTR_SSIZE field. */ +#define BR_DMA_TCDn_ATTR_SSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SSIZE) + +/*! @brief Format value for bitfield DMA_TCDn_ATTR_SSIZE. */ +#define BF_DMA_TCDn_ATTR_SSIZE(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_ATTR_SSIZE) & BM_DMA_TCDn_ATTR_SSIZE) + +/*! @brief Set the SSIZE field to a new value. */ +#define BW_DMA_TCDn_ATTR_SSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SSIZE) | BF_DMA_TCDn_ATTR_SSIZE(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_ATTR, field SMOD[15:11] (RW) + * + * Values: + * - 0 - Source address modulo feature is disabled + */ +/*@{*/ +#define BP_DMA_TCDn_ATTR_SMOD (11U) /*!< Bit position for DMA_TCDn_ATTR_SMOD. */ +#define BM_DMA_TCDn_ATTR_SMOD (0xF800U) /*!< Bit mask for DMA_TCDn_ATTR_SMOD. */ +#define BS_DMA_TCDn_ATTR_SMOD (5U) /*!< Bit field size in bits for DMA_TCDn_ATTR_SMOD. */ + +/*! @brief Read current value of the DMA_TCDn_ATTR_SMOD field. */ +#define BR_DMA_TCDn_ATTR_SMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SMOD) + +/*! @brief Format value for bitfield DMA_TCDn_ATTR_SMOD. */ +#define BF_DMA_TCDn_ATTR_SMOD(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_ATTR_SMOD) & BM_DMA_TCDn_ATTR_SMOD) + +/*! @brief Set the SMOD field to a new value. */ +#define BW_DMA_TCDn_ATTR_SMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SMOD) | BF_DMA_TCDn_ATTR_SMOD(v))) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) (RW) + * + * Reset value: 0x00000000U + * + * This register, or one of the next two registers (TCD_NBYTES_MLOFFNO, + * TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which + * register to use depends on whether minor loop mapping is disabled, enabled but not + * used for this channel, or enabled and used. TCD word 2 is defined as follows + * if: Minor loop mapping is disabled (CR[EMLM] = 0) If minor loop mapping is + * enabled, see the TCD_NBYTES_MLOFFNO and TCD_NBYTES_MLOFFYES register descriptions + * for TCD word 2's definition. + */ +typedef union _hw_dma_tcdn_nbytes_mlno +{ + uint32_t U; + struct _hw_dma_tcdn_nbytes_mlno_bitfields + { + uint32_t NBYTES : 32; /*!< [31:0] Minor Byte Transfer Count */ + } B; +} hw_dma_tcdn_nbytes_mlno_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_NBYTES_MLNO register + */ +/*@{*/ +#define HW_DMA_TCDn_NBYTES_MLNO_COUNT (16U) + +#define HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n) ((x) + 0x1008U + (0x20U * (n))) + +#define HW_DMA_TCDn_NBYTES_MLNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mlno_t *) HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n)) +#define HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U) +#define HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U = (v)) +#define HW_DMA_TCDn_NBYTES_MLNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) | (v))) +#define HW_DMA_TCDn_NBYTES_MLNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_NBYTES_MLNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_NBYTES_MLNO bitfields + */ + +/*! + * @name Register DMA_TCDn_NBYTES_MLNO, field NBYTES[31:0] (RW) + * + * Number of bytes to be transferred in each service request of the channel. As + * a channel activates, the appropriate TCD contents load into the eDMA engine, + * and the appropriate reads and writes perform until the minor byte transfer + * count has transferred. This is an indivisible operation and cannot be halted. + * (Although, it may be stalled by using the bandwidth control field, or via + * preemption.) After the minor count is exhausted, the SADDR and DADDR values are + * written back into the TCD memory, the major iteration count is decremented and + * restored to the TCD memory. If the major iteration count is completed, additional + * processing is performed. An NBYTES value of 0x0000_0000 is interpreted as a 4 + * GB transfer. + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLNO_NBYTES (0U) /*!< Bit position for DMA_TCDn_NBYTES_MLNO_NBYTES. */ +#define BM_DMA_TCDn_NBYTES_MLNO_NBYTES (0xFFFFFFFFU) /*!< Bit mask for DMA_TCDn_NBYTES_MLNO_NBYTES. */ +#define BS_DMA_TCDn_NBYTES_MLNO_NBYTES (32U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLNO_NBYTES. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLNO_NBYTES field. */ +#define BR_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLNO_NBYTES. */ +#define BF_DMA_TCDn_NBYTES_MLNO_NBYTES(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLNO_NBYTES) & BM_DMA_TCDn_NBYTES_MLNO_NBYTES) + +/*! @brief Set the NBYTES field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) (RW) + * + * Reset value: 0x00000000U + * + * One of three registers (this register, TCD_NBYTES_MLNO, or + * TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which register to use + * depends on whether minor loop mapping is disabled, enabled but not used for + * this channel, or enabled and used. TCD word 2 is defined as follows if: Minor + * loop mapping is enabled (CR[EMLM] = 1) and SMLOE = 0 and DMLOE = 0 If minor + * loop mapping is enabled and SMLOE or DMLOE is set, then refer to the + * TCD_NBYTES_MLOFFYES register description. If minor loop mapping is disabled, then refer to + * the TCD_NBYTES_MLNO register description. + */ +typedef union _hw_dma_tcdn_nbytes_mloffno +{ + uint32_t U; + struct _hw_dma_tcdn_nbytes_mloffno_bitfields + { + uint32_t NBYTES : 30; /*!< [29:0] Minor Byte Transfer Count */ + uint32_t DMLOE : 1; /*!< [30] Destination Minor Loop Offset enable */ + uint32_t SMLOE : 1; /*!< [31] Source Minor Loop Offset Enable */ + } B; +} hw_dma_tcdn_nbytes_mloffno_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFNO register + */ +/*@{*/ +#define HW_DMA_TCDn_NBYTES_MLOFFNO_COUNT (16U) + +#define HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n) ((x) + 0x1008U + (0x20U * (n))) + +#define HW_DMA_TCDn_NBYTES_MLOFFNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffno_t *) HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n)) +#define HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U) +#define HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U = (v)) +#define HW_DMA_TCDn_NBYTES_MLOFFNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) | (v))) +#define HW_DMA_TCDn_NBYTES_MLOFFNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_NBYTES_MLOFFNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_NBYTES_MLOFFNO bitfields + */ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFNO, field NBYTES[29:0] (RW) + * + * Number of bytes to be transferred in each service request of the channel. As + * a channel activates, the appropriate TCD contents load into the eDMA engine, + * and the appropriate reads and writes perform until the minor byte transfer + * count has transferred. This is an indivisible operation and cannot be halted; + * although, it may be stalled by using the bandwidth control field, or via + * preemption. After the minor count is exhausted, the SADDR and DADDR values are written + * back into the TCD memory, the major iteration count is decremented and + * restored to the TCD memory. If the major iteration count is completed, additional + * processing is performed. + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. */ +#define BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0x3FFFFFFFU) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. */ +#define BS_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (30U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_NBYTES field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).B.NBYTES) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_NBYTES. */ +#define BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) & BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) + +/*! @brief Set the NBYTES field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFNO, field DMLOE[30] (RW) + * + * Selects whether the minor loop offset is applied to the destination address + * upon minor loop completion. + * + * Values: + * - 0 - The minor loop offset is not applied to the DADDR + * - 1 - The minor loop offset is applied to the DADDR + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (30U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. */ +#define BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (0x40000000U) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. */ +#define BS_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (1U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_DMLOE field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE)) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_DMLOE. */ +#define BF_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) & BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) + +/*! @brief Set the DMLOE field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFNO, field SMLOE[31] (RW) + * + * Selects whether the minor loop offset is applied to the source address upon + * minor loop completion. + * + * Values: + * - 0 - The minor loop offset is not applied to the SADDR + * - 1 - The minor loop offset is applied to the SADDR + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (31U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. */ +#define BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (0x80000000U) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. */ +#define BS_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (1U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_SMLOE field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE)) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_SMLOE. */ +#define BF_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) & BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) + +/*! @brief Set the SMLOE field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) = (v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) (RW) + * + * Reset value: 0x00000000U + * + * One of three registers (this register, TCD_NBYTES_MLNO, or + * TCD_NBYTES_MLOFFNO), defines the number of bytes to transfer per request. Which register to use + * depends on whether minor loop mapping is disabled, enabled but not used for + * this channel, or enabled and used. TCD word 2 is defined as follows if: Minor + * loop mapping is enabled (CR[EMLM] = 1) and Minor loop offset is enabled (SMLOE + * or DMLOE = 1) If minor loop mapping is enabled and SMLOE and DMLOE are cleared, + * then refer to the TCD_NBYTES_MLOFFNO register description. If minor loop + * mapping is disabled, then refer to the TCD_NBYTES_MLNO register description. + */ +typedef union _hw_dma_tcdn_nbytes_mloffyes +{ + uint32_t U; + struct _hw_dma_tcdn_nbytes_mloffyes_bitfields + { + uint32_t NBYTES : 10; /*!< [9:0] Minor Byte Transfer Count */ + uint32_t MLOFF : 20; /*!< [29:10] If SMLOE or DMLOE is set, this + * field represents a sign-extended offset applied to the source or destination + * address to form the next-state value after the minor loop completes. */ + uint32_t DMLOE : 1; /*!< [30] Destination Minor Loop Offset enable */ + uint32_t SMLOE : 1; /*!< [31] Source Minor Loop Offset Enable */ + } B; +} hw_dma_tcdn_nbytes_mloffyes_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFYES register + */ +/*@{*/ +#define HW_DMA_TCDn_NBYTES_MLOFFYES_COUNT (16U) + +#define HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n) ((x) + 0x1008U + (0x20U * (n))) + +#define HW_DMA_TCDn_NBYTES_MLOFFYES(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffyes_t *) HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n)) +#define HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U) +#define HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U = (v)) +#define HW_DMA_TCDn_NBYTES_MLOFFYES_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) | (v))) +#define HW_DMA_TCDn_NBYTES_MLOFFYES_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_NBYTES_MLOFFYES_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_NBYTES_MLOFFYES bitfields + */ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFYES, field NBYTES[9:0] (RW) + * + * Number of bytes to be transferred in each service request of the channel. As + * a channel activates, the appropriate TCD contents load into the eDMA engine, + * and the appropriate reads and writes perform until the minor byte transfer + * count has transferred. This is an indivisible operation and cannot be halted. + * (Although, it may be stalled by using the bandwidth control field, or via + * preemption.) After the minor count is exhausted, the SADDR and DADDR values are + * written back into the TCD memory, the major iteration count is decremented and + * restored to the TCD memory. If the major iteration count is completed, additional + * processing is performed. + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. */ +#define BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0x000003FFU) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. */ +#define BS_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (10U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_NBYTES field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.NBYTES) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_NBYTES. */ +#define BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) & BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) + +/*! @brief Set the NBYTES field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFYES, field MLOFF[29:10] (RW) + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (10U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. */ +#define BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (0x3FFFFC00U) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. */ +#define BS_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (20U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_MLOFF field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.MLOFF) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_MLOFF. */ +#define BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) & BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) + +/*! @brief Set the MLOFF field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) | BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFYES, field DMLOE[30] (RW) + * + * Selects whether the minor loop offset is applied to the destination address + * upon minor loop completion. + * + * Values: + * - 0 - The minor loop offset is not applied to the DADDR + * - 1 - The minor loop offset is applied to the DADDR + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (30U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. */ +#define BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (0x40000000U) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. */ +#define BS_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (1U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_DMLOE field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE)) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_DMLOE. */ +#define BF_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) & BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) + +/*! @brief Set the DMLOE field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_NBYTES_MLOFFYES, field SMLOE[31] (RW) + * + * Selects whether the minor loop offset is applied to the source address upon + * minor loop completion. + * + * Values: + * - 0 - The minor loop offset is not applied to the SADDR + * - 1 - The minor loop offset is applied to the SADDR + */ +/*@{*/ +#define BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (31U) /*!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. */ +#define BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (0x80000000U) /*!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. */ +#define BS_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (1U) /*!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. */ + +/*! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_SMLOE field. */ +#define BR_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE)) + +/*! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_SMLOE. */ +#define BF_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) & BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) + +/*! @brief Set the SMLOE field to a new value. */ +#define BW_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) = (v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_dma_tcdn_slast +{ + uint32_t U; + struct _hw_dma_tcdn_slast_bitfields + { + uint32_t SLAST : 32; /*!< [31:0] Last source Address Adjustment */ + } B; +} hw_dma_tcdn_slast_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_SLAST register + */ +/*@{*/ +#define HW_DMA_TCDn_SLAST_COUNT (16U) + +#define HW_DMA_TCDn_SLAST_ADDR(x, n) ((x) + 0x100CU + (0x20U * (n))) + +#define HW_DMA_TCDn_SLAST(x, n) (*(__IO hw_dma_tcdn_slast_t *) HW_DMA_TCDn_SLAST_ADDR(x, n)) +#define HW_DMA_TCDn_SLAST_RD(x, n) (HW_DMA_TCDn_SLAST(x, n).U) +#define HW_DMA_TCDn_SLAST_WR(x, n, v) (HW_DMA_TCDn_SLAST(x, n).U = (v)) +#define HW_DMA_TCDn_SLAST_SET(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) | (v))) +#define HW_DMA_TCDn_SLAST_CLR(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_SLAST_TOG(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_SLAST bitfields + */ + +/*! + * @name Register DMA_TCDn_SLAST, field SLAST[31:0] (RW) + * + * Adjustment value added to the source address at the completion of the major + * iteration count. This value can be applied to restore the source address to the + * initial value, or adjust the address to reference the next data structure. + * This register uses two's complement notation; the overflow bit is discarded. + */ +/*@{*/ +#define BP_DMA_TCDn_SLAST_SLAST (0U) /*!< Bit position for DMA_TCDn_SLAST_SLAST. */ +#define BM_DMA_TCDn_SLAST_SLAST (0xFFFFFFFFU) /*!< Bit mask for DMA_TCDn_SLAST_SLAST. */ +#define BS_DMA_TCDn_SLAST_SLAST (32U) /*!< Bit field size in bits for DMA_TCDn_SLAST_SLAST. */ + +/*! @brief Read current value of the DMA_TCDn_SLAST_SLAST field. */ +#define BR_DMA_TCDn_SLAST_SLAST(x, n) (HW_DMA_TCDn_SLAST(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_SLAST_SLAST. */ +#define BF_DMA_TCDn_SLAST_SLAST(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_SLAST_SLAST) & BM_DMA_TCDn_SLAST_SLAST) + +/*! @brief Set the SLAST field to a new value. */ +#define BW_DMA_TCDn_SLAST_SLAST(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_DADDR - TCD Destination Address + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_DADDR - TCD Destination Address (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_dma_tcdn_daddr +{ + uint32_t U; + struct _hw_dma_tcdn_daddr_bitfields + { + uint32_t DADDR : 32; /*!< [31:0] Destination Address */ + } B; +} hw_dma_tcdn_daddr_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_DADDR register + */ +/*@{*/ +#define HW_DMA_TCDn_DADDR_COUNT (16U) + +#define HW_DMA_TCDn_DADDR_ADDR(x, n) ((x) + 0x1010U + (0x20U * (n))) + +#define HW_DMA_TCDn_DADDR(x, n) (*(__IO hw_dma_tcdn_daddr_t *) HW_DMA_TCDn_DADDR_ADDR(x, n)) +#define HW_DMA_TCDn_DADDR_RD(x, n) (HW_DMA_TCDn_DADDR(x, n).U) +#define HW_DMA_TCDn_DADDR_WR(x, n, v) (HW_DMA_TCDn_DADDR(x, n).U = (v)) +#define HW_DMA_TCDn_DADDR_SET(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) | (v))) +#define HW_DMA_TCDn_DADDR_CLR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_DADDR_TOG(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_DADDR bitfields + */ + +/*! + * @name Register DMA_TCDn_DADDR, field DADDR[31:0] (RW) + * + * Memory address pointing to the destination data. + */ +/*@{*/ +#define BP_DMA_TCDn_DADDR_DADDR (0U) /*!< Bit position for DMA_TCDn_DADDR_DADDR. */ +#define BM_DMA_TCDn_DADDR_DADDR (0xFFFFFFFFU) /*!< Bit mask for DMA_TCDn_DADDR_DADDR. */ +#define BS_DMA_TCDn_DADDR_DADDR (32U) /*!< Bit field size in bits for DMA_TCDn_DADDR_DADDR. */ + +/*! @brief Read current value of the DMA_TCDn_DADDR_DADDR field. */ +#define BR_DMA_TCDn_DADDR_DADDR(x, n) (HW_DMA_TCDn_DADDR(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_DADDR_DADDR. */ +#define BF_DMA_TCDn_DADDR_DADDR(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_DADDR_DADDR) & BM_DMA_TCDn_DADDR_DADDR) + +/*! @brief Set the DADDR field to a new value. */ +#define BW_DMA_TCDn_DADDR_DADDR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_dma_tcdn_doff +{ + uint16_t U; + struct _hw_dma_tcdn_doff_bitfields + { + uint16_t DOFF : 16; /*!< [15:0] Destination Address Signed offset */ + } B; +} hw_dma_tcdn_doff_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_DOFF register + */ +/*@{*/ +#define HW_DMA_TCDn_DOFF_COUNT (16U) + +#define HW_DMA_TCDn_DOFF_ADDR(x, n) ((x) + 0x1014U + (0x20U * (n))) + +#define HW_DMA_TCDn_DOFF(x, n) (*(__IO hw_dma_tcdn_doff_t *) HW_DMA_TCDn_DOFF_ADDR(x, n)) +#define HW_DMA_TCDn_DOFF_RD(x, n) (HW_DMA_TCDn_DOFF(x, n).U) +#define HW_DMA_TCDn_DOFF_WR(x, n, v) (HW_DMA_TCDn_DOFF(x, n).U = (v)) +#define HW_DMA_TCDn_DOFF_SET(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) | (v))) +#define HW_DMA_TCDn_DOFF_CLR(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_DOFF_TOG(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_DOFF bitfields + */ + +/*! + * @name Register DMA_TCDn_DOFF, field DOFF[15:0] (RW) + * + * Sign-extended offset applied to the current destination address to form the + * next-state value as each destination write is completed. + */ +/*@{*/ +#define BP_DMA_TCDn_DOFF_DOFF (0U) /*!< Bit position for DMA_TCDn_DOFF_DOFF. */ +#define BM_DMA_TCDn_DOFF_DOFF (0xFFFFU) /*!< Bit mask for DMA_TCDn_DOFF_DOFF. */ +#define BS_DMA_TCDn_DOFF_DOFF (16U) /*!< Bit field size in bits for DMA_TCDn_DOFF_DOFF. */ + +/*! @brief Read current value of the DMA_TCDn_DOFF_DOFF field. */ +#define BR_DMA_TCDn_DOFF_DOFF(x, n) (HW_DMA_TCDn_DOFF(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_DOFF_DOFF. */ +#define BF_DMA_TCDn_DOFF_DOFF(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_DOFF_DOFF) & BM_DMA_TCDn_DOFF_DOFF) + +/*! @brief Set the DOFF field to a new value. */ +#define BW_DMA_TCDn_DOFF_DOFF(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW) + * + * Reset value: 0x0000U + * + * If TCDn_CITER[ELINK] is cleared, the TCDn_CITER register is defined as + * follows. + */ +typedef union _hw_dma_tcdn_citer_elinkno +{ + uint16_t U; + struct _hw_dma_tcdn_citer_elinkno_bitfields + { + uint16_t CITER : 15; /*!< [14:0] Current Major Iteration Count */ + uint16_t ELINK : 1; /*!< [15] Enable channel-to-channel linking on + * minor-loop complete */ + } B; +} hw_dma_tcdn_citer_elinkno_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_CITER_ELINKNO register + */ +/*@{*/ +#define HW_DMA_TCDn_CITER_ELINKNO_COUNT (16U) + +#define HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n) ((x) + 0x1016U + (0x20U * (n))) + +#define HW_DMA_TCDn_CITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_citer_elinkno_t *) HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n)) +#define HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U) +#define HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U = (v)) +#define HW_DMA_TCDn_CITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) | (v))) +#define HW_DMA_TCDn_CITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_CITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_CITER_ELINKNO bitfields + */ + +/*! + * @name Register DMA_TCDn_CITER_ELINKNO, field CITER[14:0] (RW) + * + * This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current + * major loop count for the channel. It is decremented each time the minor loop is + * completed and updated in the transfer control descriptor memory. After the + * major iteration count is exhausted, the channel performs a number of operations + * (e.g., final source and destination address calculations), optionally generating + * an interrupt to signal channel completion before reloading the CITER field + * from the beginning iteration count (BITER) field. When the CITER field is + * initially loaded by software, it must be set to the same value as that contained in + * the BITER field. If the channel is configured to execute a single service + * request, the initial values of BITER and CITER should be 0x0001. + */ +/*@{*/ +#define BP_DMA_TCDn_CITER_ELINKNO_CITER (0U) /*!< Bit position for DMA_TCDn_CITER_ELINKNO_CITER. */ +#define BM_DMA_TCDn_CITER_ELINKNO_CITER (0x7FFFU) /*!< Bit mask for DMA_TCDn_CITER_ELINKNO_CITER. */ +#define BS_DMA_TCDn_CITER_ELINKNO_CITER (15U) /*!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_CITER. */ + +/*! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_CITER field. */ +#define BR_DMA_TCDn_CITER_ELINKNO_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).B.CITER) + +/*! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_CITER. */ +#define BF_DMA_TCDn_CITER_ELINKNO_CITER(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CITER_ELINKNO_CITER) & BM_DMA_TCDn_CITER_ELINKNO_CITER) + +/*! @brief Set the CITER field to a new value. */ +#define BW_DMA_TCDn_CITER_ELINKNO_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKNO_CITER) | BF_DMA_TCDn_CITER_ELINKNO_CITER(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CITER_ELINKNO, field ELINK[15] (RW) + * + * As the channel completes the minor loop, this flag enables linking to another + * channel, defined by the LINKCH field. The link target channel initiates a + * channel service request via an internal mechanism that sets the TCDn_CSR[START] + * bit of the specified channel. If channel linking is disabled, the CITER value + * is extended to 15 bits in place of a link channel number. If the major loop is + * exhausted, this link mechanism is suppressed in favor of the MAJORELINK + * channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a + * configuration error is reported. + * + * Values: + * - 0 - The channel-to-channel linking is disabled + * - 1 - The channel-to-channel linking is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_CITER_ELINKNO_ELINK (15U) /*!< Bit position for DMA_TCDn_CITER_ELINKNO_ELINK. */ +#define BM_DMA_TCDn_CITER_ELINKNO_ELINK (0x8000U) /*!< Bit mask for DMA_TCDn_CITER_ELINKNO_ELINK. */ +#define BS_DMA_TCDn_CITER_ELINKNO_ELINK (1U) /*!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_ELINK. */ + +/*! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_ELINK field. */ +#define BR_DMA_TCDn_CITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK)) + +/*! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_ELINK. */ +#define BF_DMA_TCDn_CITER_ELINKNO_ELINK(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CITER_ELINKNO_ELINK) & BM_DMA_TCDn_CITER_ELINKNO_ELINK) + +/*! @brief Set the ELINK field to a new value. */ +#define BW_DMA_TCDn_CITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK) = (v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW) + * + * Reset value: 0x0000U + * + * If TCDn_CITER[ELINK] is set, the TCDn_CITER register is defined as follows. + */ +typedef union _hw_dma_tcdn_citer_elinkyes +{ + uint16_t U; + struct _hw_dma_tcdn_citer_elinkyes_bitfields + { + uint16_t CITER : 9; /*!< [8:0] Current Major Iteration Count */ + uint16_t LINKCH : 4; /*!< [12:9] Link Channel Number */ + uint16_t RESERVED0 : 2; /*!< [14:13] */ + uint16_t ELINK : 1; /*!< [15] Enable channel-to-channel linking on + * minor-loop complete */ + } B; +} hw_dma_tcdn_citer_elinkyes_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_CITER_ELINKYES register + */ +/*@{*/ +#define HW_DMA_TCDn_CITER_ELINKYES_COUNT (16U) + +#define HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n) ((x) + 0x1016U + (0x20U * (n))) + +#define HW_DMA_TCDn_CITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_citer_elinkyes_t *) HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n)) +#define HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U) +#define HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U = (v)) +#define HW_DMA_TCDn_CITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) | (v))) +#define HW_DMA_TCDn_CITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_CITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_CITER_ELINKYES bitfields + */ + +/*! + * @name Register DMA_TCDn_CITER_ELINKYES, field CITER[8:0] (RW) + * + * This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current + * major loop count for the channel. It is decremented each time the minor loop is + * completed and updated in the transfer control descriptor memory. After the + * major iteration count is exhausted, the channel performs a number of operations + * (e.g., final source and destination address calculations), optionally generating + * an interrupt to signal channel completion before reloading the CITER field + * from the beginning iteration count (BITER) field. When the CITER field is + * initially loaded by software, it must be set to the same value as that contained in + * the BITER field. If the channel is configured to execute a single service + * request, the initial values of BITER and CITER should be 0x0001. + */ +/*@{*/ +#define BP_DMA_TCDn_CITER_ELINKYES_CITER (0U) /*!< Bit position for DMA_TCDn_CITER_ELINKYES_CITER. */ +#define BM_DMA_TCDn_CITER_ELINKYES_CITER (0x01FFU) /*!< Bit mask for DMA_TCDn_CITER_ELINKYES_CITER. */ +#define BS_DMA_TCDn_CITER_ELINKYES_CITER (9U) /*!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_CITER. */ + +/*! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_CITER field. */ +#define BR_DMA_TCDn_CITER_ELINKYES_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.CITER) + +/*! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_CITER. */ +#define BF_DMA_TCDn_CITER_ELINKYES_CITER(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CITER_ELINKYES_CITER) & BM_DMA_TCDn_CITER_ELINKYES_CITER) + +/*! @brief Set the CITER field to a new value. */ +#define BW_DMA_TCDn_CITER_ELINKYES_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_CITER) | BF_DMA_TCDn_CITER_ELINKYES_CITER(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CITER_ELINKYES, field LINKCH[12:9] (RW) + * + * If channel-to-channel linking is enabled (ELINK = 1), then after the minor + * loop is exhausted, the eDMA engine initiates a channel service request to the + * channel defined by these four bits by setting that channel's TCDn_CSR[START] bit. + */ +/*@{*/ +#define BP_DMA_TCDn_CITER_ELINKYES_LINKCH (9U) /*!< Bit position for DMA_TCDn_CITER_ELINKYES_LINKCH. */ +#define BM_DMA_TCDn_CITER_ELINKYES_LINKCH (0x1E00U) /*!< Bit mask for DMA_TCDn_CITER_ELINKYES_LINKCH. */ +#define BS_DMA_TCDn_CITER_ELINKYES_LINKCH (4U) /*!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_LINKCH. */ + +/*! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_LINKCH field. */ +#define BR_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.LINKCH) + +/*! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_LINKCH. */ +#define BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CITER_ELINKYES_LINKCH) & BM_DMA_TCDn_CITER_ELINKYES_LINKCH) + +/*! @brief Set the LINKCH field to a new value. */ +#define BW_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_LINKCH) | BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CITER_ELINKYES, field ELINK[15] (RW) + * + * As the channel completes the minor loop, this flag enables linking to another + * channel, defined by the LINKCH field. The link target channel initiates a + * channel service request via an internal mechanism that sets the TCDn_CSR[START] + * bit of the specified channel. If channel linking is disabled, the CITER value + * is extended to 15 bits in place of a link channel number. If the major loop is + * exhausted, this link mechanism is suppressed in favor of the MAJORELINK + * channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a + * configuration error is reported. + * + * Values: + * - 0 - The channel-to-channel linking is disabled + * - 1 - The channel-to-channel linking is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_CITER_ELINKYES_ELINK (15U) /*!< Bit position for DMA_TCDn_CITER_ELINKYES_ELINK. */ +#define BM_DMA_TCDn_CITER_ELINKYES_ELINK (0x8000U) /*!< Bit mask for DMA_TCDn_CITER_ELINKYES_ELINK. */ +#define BS_DMA_TCDn_CITER_ELINKYES_ELINK (1U) /*!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_ELINK. */ + +/*! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_ELINK field. */ +#define BR_DMA_TCDn_CITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK)) + +/*! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_ELINK. */ +#define BF_DMA_TCDn_CITER_ELINKYES_ELINK(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CITER_ELINKYES_ELINK) & BM_DMA_TCDn_CITER_ELINKYES_ELINK) + +/*! @brief Set the ELINK field to a new value. */ +#define BW_DMA_TCDn_CITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK) = (v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_dma_tcdn_dlastsga +{ + uint32_t U; + struct _hw_dma_tcdn_dlastsga_bitfields + { + uint32_t DLASTSGA : 32; /*!< [31:0] */ + } B; +} hw_dma_tcdn_dlastsga_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_DLASTSGA register + */ +/*@{*/ +#define HW_DMA_TCDn_DLASTSGA_COUNT (16U) + +#define HW_DMA_TCDn_DLASTSGA_ADDR(x, n) ((x) + 0x1018U + (0x20U * (n))) + +#define HW_DMA_TCDn_DLASTSGA(x, n) (*(__IO hw_dma_tcdn_dlastsga_t *) HW_DMA_TCDn_DLASTSGA_ADDR(x, n)) +#define HW_DMA_TCDn_DLASTSGA_RD(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U) +#define HW_DMA_TCDn_DLASTSGA_WR(x, n, v) (HW_DMA_TCDn_DLASTSGA(x, n).U = (v)) +#define HW_DMA_TCDn_DLASTSGA_SET(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) | (v))) +#define HW_DMA_TCDn_DLASTSGA_CLR(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_DLASTSGA_TOG(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_DLASTSGA bitfields + */ + +/*! + * @name Register DMA_TCDn_DLASTSGA, field DLASTSGA[31:0] (RW) + * + * Destination last address adjustment or the memory address for the next + * transfer control descriptor to be loaded into this channel (scatter/gather). If + * (TCDn_CSR[ESG] = 0), then: Adjustment value added to the destination address at + * the completion of the major iteration count. This value can apply to restore the + * destination address to the initial value or adjust the address to reference + * the next data structure. This field uses two's complement notation for the + * final destination address adjustment. Otherwise: This address points to the + * beginning of a 0-modulo-32-byte region containing the next transfer control + * descriptor to be loaded into this channel. This channel reload is performed as the + * major iteration count completes. The scatter/gather address must be + * 0-modulo-32-byte, else a configuration error is reported. + */ +/*@{*/ +#define BP_DMA_TCDn_DLASTSGA_DLASTSGA (0U) /*!< Bit position for DMA_TCDn_DLASTSGA_DLASTSGA. */ +#define BM_DMA_TCDn_DLASTSGA_DLASTSGA (0xFFFFFFFFU) /*!< Bit mask for DMA_TCDn_DLASTSGA_DLASTSGA. */ +#define BS_DMA_TCDn_DLASTSGA_DLASTSGA (32U) /*!< Bit field size in bits for DMA_TCDn_DLASTSGA_DLASTSGA. */ + +/*! @brief Read current value of the DMA_TCDn_DLASTSGA_DLASTSGA field. */ +#define BR_DMA_TCDn_DLASTSGA_DLASTSGA(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U) + +/*! @brief Format value for bitfield DMA_TCDn_DLASTSGA_DLASTSGA. */ +#define BF_DMA_TCDn_DLASTSGA_DLASTSGA(v) ((uint32_t)((uint32_t)(v) << BP_DMA_TCDn_DLASTSGA_DLASTSGA) & BM_DMA_TCDn_DLASTSGA_DLASTSGA) + +/*! @brief Set the DLASTSGA field to a new value. */ +#define BW_DMA_TCDn_DLASTSGA_DLASTSGA(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_CSR - TCD Control and Status + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_CSR - TCD Control and Status (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_dma_tcdn_csr +{ + uint16_t U; + struct _hw_dma_tcdn_csr_bitfields + { + uint16_t START : 1; /*!< [0] Channel Start */ + uint16_t INTMAJOR : 1; /*!< [1] Enable an interrupt when major + * iteration count completes */ + uint16_t INTHALF : 1; /*!< [2] Enable an interrupt when major counter + * is half complete. */ + uint16_t DREQ : 1; /*!< [3] Disable Request */ + uint16_t ESG : 1; /*!< [4] Enable Scatter/Gather Processing */ + uint16_t MAJORELINK : 1; /*!< [5] Enable channel-to-channel linking + * on major loop complete */ + uint16_t ACTIVE : 1; /*!< [6] Channel Active */ + uint16_t DONE : 1; /*!< [7] Channel Done */ + uint16_t MAJORLINKCH : 4; /*!< [11:8] Link Channel Number */ + uint16_t RESERVED0 : 2; /*!< [13:12] */ + uint16_t BWC : 2; /*!< [15:14] Bandwidth Control */ + } B; +} hw_dma_tcdn_csr_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_CSR register + */ +/*@{*/ +#define HW_DMA_TCDn_CSR_COUNT (16U) + +#define HW_DMA_TCDn_CSR_ADDR(x, n) ((x) + 0x101CU + (0x20U * (n))) + +#define HW_DMA_TCDn_CSR(x, n) (*(__IO hw_dma_tcdn_csr_t *) HW_DMA_TCDn_CSR_ADDR(x, n)) +#define HW_DMA_TCDn_CSR_RD(x, n) (HW_DMA_TCDn_CSR(x, n).U) +#define HW_DMA_TCDn_CSR_WR(x, n, v) (HW_DMA_TCDn_CSR(x, n).U = (v)) +#define HW_DMA_TCDn_CSR_SET(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) | (v))) +#define HW_DMA_TCDn_CSR_CLR(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_CSR_TOG(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_CSR bitfields + */ + +/*! + * @name Register DMA_TCDn_CSR, field START[0] (RW) + * + * If this flag is set, the channel is requesting service. The eDMA hardware + * automatically clears this flag after the channel begins execution. + * + * Values: + * - 0 - The channel is not explicitly started + * - 1 - The channel is explicitly started via a software initiated service + * request + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_START (0U) /*!< Bit position for DMA_TCDn_CSR_START. */ +#define BM_DMA_TCDn_CSR_START (0x0001U) /*!< Bit mask for DMA_TCDn_CSR_START. */ +#define BS_DMA_TCDn_CSR_START (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_START. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_START field. */ +#define BR_DMA_TCDn_CSR_START(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_START. */ +#define BF_DMA_TCDn_CSR_START(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_START) & BM_DMA_TCDn_CSR_START) + +/*! @brief Set the START field to a new value. */ +#define BW_DMA_TCDn_CSR_START(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field INTMAJOR[1] (RW) + * + * If this flag is set, the channel generates an interrupt request by setting + * the appropriate bit in the INT when the current major iteration count reaches + * zero. + * + * Values: + * - 0 - The end-of-major loop interrupt is disabled + * - 1 - The end-of-major loop interrupt is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_INTMAJOR (1U) /*!< Bit position for DMA_TCDn_CSR_INTMAJOR. */ +#define BM_DMA_TCDn_CSR_INTMAJOR (0x0002U) /*!< Bit mask for DMA_TCDn_CSR_INTMAJOR. */ +#define BS_DMA_TCDn_CSR_INTMAJOR (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_INTMAJOR. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_INTMAJOR field. */ +#define BR_DMA_TCDn_CSR_INTMAJOR(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_INTMAJOR. */ +#define BF_DMA_TCDn_CSR_INTMAJOR(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_INTMAJOR) & BM_DMA_TCDn_CSR_INTMAJOR) + +/*! @brief Set the INTMAJOR field to a new value. */ +#define BW_DMA_TCDn_CSR_INTMAJOR(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field INTHALF[2] (RW) + * + * If this flag is set, the channel generates an interrupt request by setting + * the appropriate bit in the INT register when the current major iteration count + * reaches the halfway point. Specifically, the comparison performed by the eDMA + * engine is (CITER == (BITER >> 1)). This halfway point interrupt request is + * provided to support double-buffered (aka ping-pong) schemes or other types of data + * movement where the processor needs an early indication of the transfer's + * progress. If BITER is set, do not use INTHALF. Use INTMAJOR instead. + * + * Values: + * - 0 - The half-point interrupt is disabled + * - 1 - The half-point interrupt is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_INTHALF (2U) /*!< Bit position for DMA_TCDn_CSR_INTHALF. */ +#define BM_DMA_TCDn_CSR_INTHALF (0x0004U) /*!< Bit mask for DMA_TCDn_CSR_INTHALF. */ +#define BS_DMA_TCDn_CSR_INTHALF (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_INTHALF. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_INTHALF field. */ +#define BR_DMA_TCDn_CSR_INTHALF(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_INTHALF. */ +#define BF_DMA_TCDn_CSR_INTHALF(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_INTHALF) & BM_DMA_TCDn_CSR_INTHALF) + +/*! @brief Set the INTHALF field to a new value. */ +#define BW_DMA_TCDn_CSR_INTHALF(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field DREQ[3] (RW) + * + * If this flag is set, the eDMA hardware automatically clears the corresponding + * ERQ bit when the current major iteration count reaches zero. + * + * Values: + * - 0 - The channel's ERQ bit is not affected + * - 1 - The channel's ERQ bit is cleared when the major loop is complete + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_DREQ (3U) /*!< Bit position for DMA_TCDn_CSR_DREQ. */ +#define BM_DMA_TCDn_CSR_DREQ (0x0008U) /*!< Bit mask for DMA_TCDn_CSR_DREQ. */ +#define BS_DMA_TCDn_CSR_DREQ (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_DREQ. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_DREQ field. */ +#define BR_DMA_TCDn_CSR_DREQ(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_DREQ. */ +#define BF_DMA_TCDn_CSR_DREQ(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_DREQ) & BM_DMA_TCDn_CSR_DREQ) + +/*! @brief Set the DREQ field to a new value. */ +#define BW_DMA_TCDn_CSR_DREQ(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field ESG[4] (RW) + * + * As the channel completes the major loop, this flag enables scatter/gather + * processing in the current channel. If enabled, the eDMA engine uses DLASTSGA as a + * memory pointer to a 0-modulo-32 address containing a 32-byte data structure + * loaded as the transfer control descriptor into the local memory. To support the + * dynamic scatter/gather coherency model, this field is forced to zero when + * written to while the TCDn_CSR[DONE] bit is set. + * + * Values: + * - 0 - The current channel's TCD is normal format. + * - 1 - The current channel's TCD specifies a scatter gather format. The + * DLASTSGA field provides a memory pointer to the next TCD to be loaded into this + * channel after the major loop completes its execution. + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_ESG (4U) /*!< Bit position for DMA_TCDn_CSR_ESG. */ +#define BM_DMA_TCDn_CSR_ESG (0x0010U) /*!< Bit mask for DMA_TCDn_CSR_ESG. */ +#define BS_DMA_TCDn_CSR_ESG (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_ESG. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_ESG field. */ +#define BR_DMA_TCDn_CSR_ESG(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_ESG. */ +#define BF_DMA_TCDn_CSR_ESG(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_ESG) & BM_DMA_TCDn_CSR_ESG) + +/*! @brief Set the ESG field to a new value. */ +#define BW_DMA_TCDn_CSR_ESG(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field MAJORELINK[5] (RW) + * + * As the channel completes the major loop, this flag enables the linking to + * another channel, defined by MAJORLINKCH. The link target channel initiates a + * channel service request via an internal mechanism that sets the TCDn_CSR[START] + * bit of the specified channel. To support the dynamic linking coherency model, + * this field is forced to zero when written to while the TCDn_CSR[DONE] bit is set. + * + * Values: + * - 0 - The channel-to-channel linking is disabled + * - 1 - The channel-to-channel linking is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_MAJORELINK (5U) /*!< Bit position for DMA_TCDn_CSR_MAJORELINK. */ +#define BM_DMA_TCDn_CSR_MAJORELINK (0x0020U) /*!< Bit mask for DMA_TCDn_CSR_MAJORELINK. */ +#define BS_DMA_TCDn_CSR_MAJORELINK (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_MAJORELINK. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_MAJORELINK field. */ +#define BR_DMA_TCDn_CSR_MAJORELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_MAJORELINK. */ +#define BF_DMA_TCDn_CSR_MAJORELINK(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_MAJORELINK) & BM_DMA_TCDn_CSR_MAJORELINK) + +/*! @brief Set the MAJORELINK field to a new value. */ +#define BW_DMA_TCDn_CSR_MAJORELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field ACTIVE[6] (RW) + * + * This flag signals the channel is currently in execution. It is set when + * channel service begins, and the eDMA clears it as the minor loop completes or if + * any error condition is detected. This bit resets to zero. + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_ACTIVE (6U) /*!< Bit position for DMA_TCDn_CSR_ACTIVE. */ +#define BM_DMA_TCDn_CSR_ACTIVE (0x0040U) /*!< Bit mask for DMA_TCDn_CSR_ACTIVE. */ +#define BS_DMA_TCDn_CSR_ACTIVE (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_ACTIVE. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_ACTIVE field. */ +#define BR_DMA_TCDn_CSR_ACTIVE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_ACTIVE. */ +#define BF_DMA_TCDn_CSR_ACTIVE(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_ACTIVE) & BM_DMA_TCDn_CSR_ACTIVE) + +/*! @brief Set the ACTIVE field to a new value. */ +#define BW_DMA_TCDn_CSR_ACTIVE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field DONE[7] (RW) + * + * This flag indicates the eDMA has completed the major loop. The eDMA engine + * sets it as the CITER count reaches zero; The software clears it, or the hardware + * when the channel is activated. This bit must be cleared to write the + * MAJORELINK or ESG bits. + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_DONE (7U) /*!< Bit position for DMA_TCDn_CSR_DONE. */ +#define BM_DMA_TCDn_CSR_DONE (0x0080U) /*!< Bit mask for DMA_TCDn_CSR_DONE. */ +#define BS_DMA_TCDn_CSR_DONE (1U) /*!< Bit field size in bits for DMA_TCDn_CSR_DONE. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_DONE field. */ +#define BR_DMA_TCDn_CSR_DONE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE)) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_DONE. */ +#define BF_DMA_TCDn_CSR_DONE(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_DONE) & BM_DMA_TCDn_CSR_DONE) + +/*! @brief Set the DONE field to a new value. */ +#define BW_DMA_TCDn_CSR_DONE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE) = (v)) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field MAJORLINKCH[11:8] (RW) + * + * If (MAJORELINK = 0) then No channel-to-channel linking (or chaining) is + * performed after the major loop counter is exhausted. else After the major loop + * counter is exhausted, the eDMA engine initiates a channel service request at the + * channel defined by these six bits by setting that channel's TCDn_CSR[START] bit. + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_MAJORLINKCH (8U) /*!< Bit position for DMA_TCDn_CSR_MAJORLINKCH. */ +#define BM_DMA_TCDn_CSR_MAJORLINKCH (0x0F00U) /*!< Bit mask for DMA_TCDn_CSR_MAJORLINKCH. */ +#define BS_DMA_TCDn_CSR_MAJORLINKCH (4U) /*!< Bit field size in bits for DMA_TCDn_CSR_MAJORLINKCH. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_MAJORLINKCH field. */ +#define BR_DMA_TCDn_CSR_MAJORLINKCH(x, n) (HW_DMA_TCDn_CSR(x, n).B.MAJORLINKCH) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_MAJORLINKCH. */ +#define BF_DMA_TCDn_CSR_MAJORLINKCH(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_MAJORLINKCH) & BM_DMA_TCDn_CSR_MAJORLINKCH) + +/*! @brief Set the MAJORLINKCH field to a new value. */ +#define BW_DMA_TCDn_CSR_MAJORLINKCH(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_MAJORLINKCH) | BF_DMA_TCDn_CSR_MAJORLINKCH(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_CSR, field BWC[15:14] (RW) + * + * Throttles the amount of bus bandwidth consumed by the eDMA. In general, as + * the eDMA processes the minor loop, it continuously generates read/write + * sequences until the minor count is exhausted. This field forces the eDMA to stall + * after the completion of each read/write access to control the bus request + * bandwidth seen by the crossbar switch. If the source and destination sizes are equal, + * this field is ignored between the first and second transfers and after the + * last write of each minor loop. This behavior is a side effect of reducing + * start-up latency. + * + * Values: + * - 00 - No eDMA engine stalls + * - 01 - Reserved + * - 10 - eDMA engine stalls for 4 cycles after each r/w + * - 11 - eDMA engine stalls for 8 cycles after each r/w + */ +/*@{*/ +#define BP_DMA_TCDn_CSR_BWC (14U) /*!< Bit position for DMA_TCDn_CSR_BWC. */ +#define BM_DMA_TCDn_CSR_BWC (0xC000U) /*!< Bit mask for DMA_TCDn_CSR_BWC. */ +#define BS_DMA_TCDn_CSR_BWC (2U) /*!< Bit field size in bits for DMA_TCDn_CSR_BWC. */ + +/*! @brief Read current value of the DMA_TCDn_CSR_BWC field. */ +#define BR_DMA_TCDn_CSR_BWC(x, n) (HW_DMA_TCDn_CSR(x, n).B.BWC) + +/*! @brief Format value for bitfield DMA_TCDn_CSR_BWC. */ +#define BF_DMA_TCDn_CSR_BWC(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_CSR_BWC) & BM_DMA_TCDn_CSR_BWC) + +/*! @brief Set the BWC field to a new value. */ +#define BW_DMA_TCDn_CSR_BWC(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_BWC) | BF_DMA_TCDn_CSR_BWC(v))) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW) + * + * Reset value: 0x0000U + * + * If the TCDn_BITER[ELINK] bit is cleared, the TCDn_BITER register is defined + * as follows. + */ +typedef union _hw_dma_tcdn_biter_elinkno +{ + uint16_t U; + struct _hw_dma_tcdn_biter_elinkno_bitfields + { + uint16_t BITER : 15; /*!< [14:0] Starting Major Iteration Count */ + uint16_t ELINK : 1; /*!< [15] Enables channel-to-channel linking on + * minor loop complete */ + } B; +} hw_dma_tcdn_biter_elinkno_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_BITER_ELINKNO register + */ +/*@{*/ +#define HW_DMA_TCDn_BITER_ELINKNO_COUNT (16U) + +#define HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n) ((x) + 0x101EU + (0x20U * (n))) + +#define HW_DMA_TCDn_BITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_biter_elinkno_t *) HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n)) +#define HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U) +#define HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U = (v)) +#define HW_DMA_TCDn_BITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) | (v))) +#define HW_DMA_TCDn_BITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_BITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_BITER_ELINKNO bitfields + */ + +/*! + * @name Register DMA_TCDn_BITER_ELINKNO, field BITER[14:0] (RW) + * + * As the transfer control descriptor is first loaded by software, this 9-bit + * (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER + * field. As the major iteration count is exhausted, the contents of this field + * are reloaded into the CITER field. When the software loads the TCD, this field + * must be set equal to the corresponding CITER field; otherwise, a configuration + * error is reported. As the major iteration count is exhausted, the contents of + * this field is reloaded into the CITER field. If the channel is configured to + * execute a single service request, the initial values of BITER and CITER should + * be 0x0001. + */ +/*@{*/ +#define BP_DMA_TCDn_BITER_ELINKNO_BITER (0U) /*!< Bit position for DMA_TCDn_BITER_ELINKNO_BITER. */ +#define BM_DMA_TCDn_BITER_ELINKNO_BITER (0x7FFFU) /*!< Bit mask for DMA_TCDn_BITER_ELINKNO_BITER. */ +#define BS_DMA_TCDn_BITER_ELINKNO_BITER (15U) /*!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_BITER. */ + +/*! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_BITER field. */ +#define BR_DMA_TCDn_BITER_ELINKNO_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).B.BITER) + +/*! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_BITER. */ +#define BF_DMA_TCDn_BITER_ELINKNO_BITER(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_BITER_ELINKNO_BITER) & BM_DMA_TCDn_BITER_ELINKNO_BITER) + +/*! @brief Set the BITER field to a new value. */ +#define BW_DMA_TCDn_BITER_ELINKNO_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKNO_BITER) | BF_DMA_TCDn_BITER_ELINKNO_BITER(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_BITER_ELINKNO, field ELINK[15] (RW) + * + * As the channel completes the minor loop, this flag enables the linking to + * another channel, defined by BITER[LINKCH]. The link target channel initiates a + * channel service request via an internal mechanism that sets the TCDn_CSR[START] + * bit of the specified channel. If channel linking is disabled, the BITER value + * extends to 15 bits in place of a link channel number. If the major loop is + * exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel + * linking. When the software loads the TCD, this field must be set equal to the + * corresponding CITER field; otherwise, a configuration error is reported. As the + * major iteration count is exhausted, the contents of this field is reloaded + * into the CITER field. + * + * Values: + * - 0 - The channel-to-channel linking is disabled + * - 1 - The channel-to-channel linking is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_BITER_ELINKNO_ELINK (15U) /*!< Bit position for DMA_TCDn_BITER_ELINKNO_ELINK. */ +#define BM_DMA_TCDn_BITER_ELINKNO_ELINK (0x8000U) /*!< Bit mask for DMA_TCDn_BITER_ELINKNO_ELINK. */ +#define BS_DMA_TCDn_BITER_ELINKNO_ELINK (1U) /*!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_ELINK. */ + +/*! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_ELINK field. */ +#define BR_DMA_TCDn_BITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK)) + +/*! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_ELINK. */ +#define BF_DMA_TCDn_BITER_ELINKNO_ELINK(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_BITER_ELINKNO_ELINK) & BM_DMA_TCDn_BITER_ELINKNO_ELINK) + +/*! @brief Set the ELINK field to a new value. */ +#define BW_DMA_TCDn_BITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK) = (v)) +/*@}*/ +/******************************************************************************* + * HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) + ******************************************************************************/ + +/*! + * @brief HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW) + * + * Reset value: 0x0000U + * + * If the TCDn_BITER[ELINK] bit is set, the TCDn_BITER register is defined as + * follows. + */ +typedef union _hw_dma_tcdn_biter_elinkyes +{ + uint16_t U; + struct _hw_dma_tcdn_biter_elinkyes_bitfields + { + uint16_t BITER : 9; /*!< [8:0] Starting Major Iteration Count */ + uint16_t LINKCH : 4; /*!< [12:9] Link Channel Number */ + uint16_t RESERVED0 : 2; /*!< [14:13] */ + uint16_t ELINK : 1; /*!< [15] Enables channel-to-channel linking on + * minor loop complete */ + } B; +} hw_dma_tcdn_biter_elinkyes_t; + +/*! + * @name Constants and macros for entire DMA_TCDn_BITER_ELINKYES register + */ +/*@{*/ +#define HW_DMA_TCDn_BITER_ELINKYES_COUNT (16U) + +#define HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n) ((x) + 0x101EU + (0x20U * (n))) + +#define HW_DMA_TCDn_BITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_biter_elinkyes_t *) HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n)) +#define HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U) +#define HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U = (v)) +#define HW_DMA_TCDn_BITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) | (v))) +#define HW_DMA_TCDn_BITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~(v))) +#define HW_DMA_TCDn_BITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMA_TCDn_BITER_ELINKYES bitfields + */ + +/*! + * @name Register DMA_TCDn_BITER_ELINKYES, field BITER[8:0] (RW) + * + * As the transfer control descriptor is first loaded by software, this 9-bit + * (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER + * field. As the major iteration count is exhausted, the contents of this field + * are reloaded into the CITER field. When the software loads the TCD, this field + * must be set equal to the corresponding CITER field; otherwise, a configuration + * error is reported. As the major iteration count is exhausted, the contents of + * this field is reloaded into the CITER field. If the channel is configured to + * execute a single service request, the initial values of BITER and CITER should + * be 0x0001. + */ +/*@{*/ +#define BP_DMA_TCDn_BITER_ELINKYES_BITER (0U) /*!< Bit position for DMA_TCDn_BITER_ELINKYES_BITER. */ +#define BM_DMA_TCDn_BITER_ELINKYES_BITER (0x01FFU) /*!< Bit mask for DMA_TCDn_BITER_ELINKYES_BITER. */ +#define BS_DMA_TCDn_BITER_ELINKYES_BITER (9U) /*!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_BITER. */ + +/*! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_BITER field. */ +#define BR_DMA_TCDn_BITER_ELINKYES_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.BITER) + +/*! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_BITER. */ +#define BF_DMA_TCDn_BITER_ELINKYES_BITER(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_BITER_ELINKYES_BITER) & BM_DMA_TCDn_BITER_ELINKYES_BITER) + +/*! @brief Set the BITER field to a new value. */ +#define BW_DMA_TCDn_BITER_ELINKYES_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_BITER) | BF_DMA_TCDn_BITER_ELINKYES_BITER(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_BITER_ELINKYES, field LINKCH[12:9] (RW) + * + * If channel-to-channel linking is enabled (ELINK = 1), then after the minor + * loop is exhausted, the eDMA engine initiates a channel service request at the + * channel defined by these four bits by setting that channel's TCDn_CSR[START] + * bit. When the software loads the TCD, this field must be set equal to the + * corresponding CITER field; otherwise, a configuration error is reported. As the major + * iteration count is exhausted, the contents of this field is reloaded into the + * CITER field. + */ +/*@{*/ +#define BP_DMA_TCDn_BITER_ELINKYES_LINKCH (9U) /*!< Bit position for DMA_TCDn_BITER_ELINKYES_LINKCH. */ +#define BM_DMA_TCDn_BITER_ELINKYES_LINKCH (0x1E00U) /*!< Bit mask for DMA_TCDn_BITER_ELINKYES_LINKCH. */ +#define BS_DMA_TCDn_BITER_ELINKYES_LINKCH (4U) /*!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_LINKCH. */ + +/*! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_LINKCH field. */ +#define BR_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.LINKCH) + +/*! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_LINKCH. */ +#define BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_BITER_ELINKYES_LINKCH) & BM_DMA_TCDn_BITER_ELINKYES_LINKCH) + +/*! @brief Set the LINKCH field to a new value. */ +#define BW_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_LINKCH) | BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v))) +/*@}*/ + +/*! + * @name Register DMA_TCDn_BITER_ELINKYES, field ELINK[15] (RW) + * + * As the channel completes the minor loop, this flag enables the linking to + * another channel, defined by BITER[LINKCH]. The link target channel initiates a + * channel service request via an internal mechanism that sets the TCDn_CSR[START] + * bit of the specified channel. If channel linking disables, the BITER value + * extends to 15 bits in place of a link channel number. If the major loop is + * exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel + * linking. When the software loads the TCD, this field must be set equal to the + * corresponding CITER field; otherwise, a configuration error is reported. As the + * major iteration count is exhausted, the contents of this field is reloaded into + * the CITER field. + * + * Values: + * - 0 - The channel-to-channel linking is disabled + * - 1 - The channel-to-channel linking is enabled + */ +/*@{*/ +#define BP_DMA_TCDn_BITER_ELINKYES_ELINK (15U) /*!< Bit position for DMA_TCDn_BITER_ELINKYES_ELINK. */ +#define BM_DMA_TCDn_BITER_ELINKYES_ELINK (0x8000U) /*!< Bit mask for DMA_TCDn_BITER_ELINKYES_ELINK. */ +#define BS_DMA_TCDn_BITER_ELINKYES_ELINK (1U) /*!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_ELINK. */ + +/*! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_ELINK field. */ +#define BR_DMA_TCDn_BITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK)) + +/*! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_ELINK. */ +#define BF_DMA_TCDn_BITER_ELINKYES_ELINK(v) ((uint16_t)((uint16_t)(v) << BP_DMA_TCDn_BITER_ELINKYES_ELINK) & BM_DMA_TCDn_BITER_ELINKYES_ELINK) + +/*! @brief Set the ELINK field to a new value. */ +#define BW_DMA_TCDn_BITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK) = (v)) +/*@}*/ + +/* +** Start of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma push + #pragma anon_unions +#elif defined(__CWCC__) + #pragma push + #pragma cpp_extensions on +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=extended +#else + #error Not supported compiler type +#endif + +/******************************************************************************* + * hw_dma_t - module struct + ******************************************************************************/ +/*! + * @brief All DMA module registers. + */ +#pragma pack(1) +typedef struct _hw_dma +{ + __IO hw_dma_cr_t CR; /*!< [0x0] Control Register */ + __I hw_dma_es_t ES; /*!< [0x4] Error Status Register */ + uint8_t _reserved0[4]; + __IO hw_dma_erq_t ERQ; /*!< [0xC] Enable Request Register */ + uint8_t _reserved1[4]; + __IO hw_dma_eei_t EEI; /*!< [0x14] Enable Error Interrupt Register */ + __O hw_dma_ceei_t CEEI; /*!< [0x18] Clear Enable Error Interrupt Register */ + __O hw_dma_seei_t SEEI; /*!< [0x19] Set Enable Error Interrupt Register */ + __O hw_dma_cerq_t CERQ; /*!< [0x1A] Clear Enable Request Register */ + __O hw_dma_serq_t SERQ; /*!< [0x1B] Set Enable Request Register */ + __O hw_dma_cdne_t CDNE; /*!< [0x1C] Clear DONE Status Bit Register */ + __O hw_dma_ssrt_t SSRT; /*!< [0x1D] Set START Bit Register */ + __O hw_dma_cerr_t CERR; /*!< [0x1E] Clear Error Register */ + __O hw_dma_cint_t CINT; /*!< [0x1F] Clear Interrupt Request Register */ + uint8_t _reserved2[4]; + __IO hw_dma_int_t INT; /*!< [0x24] Interrupt Request Register */ + uint8_t _reserved3[4]; + __IO hw_dma_err_t ERR; /*!< [0x2C] Error Register */ + uint8_t _reserved4[4]; + __I hw_dma_hrs_t HRS; /*!< [0x34] Hardware Request Status Register */ + uint8_t _reserved5[12]; + __IO hw_dma_ears_t EARS; /*!< [0x44] Enable Asynchronous Request in Stop Register */ + uint8_t _reserved6[184]; + __IO hw_dma_dchprin_t DCHPRIn[16]; /*!< [0x100] Channel n Priority Register */ + uint8_t _reserved7[3824]; + struct { + __IO hw_dma_tcdn_saddr_t TCDn_SADDR; /*!< [0x1000] TCD Source Address */ + __IO hw_dma_tcdn_soff_t TCDn_SOFF; /*!< [0x1004] TCD Signed Source Address Offset */ + __IO hw_dma_tcdn_attr_t TCDn_ATTR; /*!< [0x1006] TCD Transfer Attributes */ + union { + __IO hw_dma_tcdn_nbytes_mlno_t TCDn_NBYTES_MLNO; /*!< [0x1008] TCD Minor Byte Count (Minor Loop Disabled) */ + __IO hw_dma_tcdn_nbytes_mloffno_t TCDn_NBYTES_MLOFFNO; /*!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) */ + __IO hw_dma_tcdn_nbytes_mloffyes_t TCDn_NBYTES_MLOFFYES; /*!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) */ + }; + __IO hw_dma_tcdn_slast_t TCDn_SLAST; /*!< [0x100C] TCD Last Source Address Adjustment */ + __IO hw_dma_tcdn_daddr_t TCDn_DADDR; /*!< [0x1010] TCD Destination Address */ + __IO hw_dma_tcdn_doff_t TCDn_DOFF; /*!< [0x1014] TCD Signed Destination Address Offset */ + union { + __IO hw_dma_tcdn_citer_elinkno_t TCDn_CITER_ELINKNO; /*!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) */ + __IO hw_dma_tcdn_citer_elinkyes_t TCDn_CITER_ELINKYES; /*!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) */ + }; + __IO hw_dma_tcdn_dlastsga_t TCDn_DLASTSGA; /*!< [0x1018] TCD Last Destination Address Adjustment/Scatter Gather Address */ + __IO hw_dma_tcdn_csr_t TCDn_CSR; /*!< [0x101C] TCD Control and Status */ + union { + __IO hw_dma_tcdn_biter_elinkno_t TCDn_BITER_ELINKNO; /*!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) */ + __IO hw_dma_tcdn_biter_elinkyes_t TCDn_BITER_ELINKYES; /*!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) */ + }; + } TCD[16]; +} hw_dma_t; +#pragma pack() + +/*! @brief Macro to access all DMA registers. */ +/*! @param x DMA module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_DMA(DMA_BASE)</code>. */ +#define HW_DMA(x) (*(hw_dma_t *)(x)) + +/* +** End of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma pop +#elif defined(__CWCC__) + #pragma pop +#elif defined(__GNUC__) + /* leave anonymous unions enabled */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=default +#else + #error Not supported compiler type +#endif + +#endif /* __HW_DMA_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dmamux.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dmamux.h new file mode 100644 index 0000000000..90d577099c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_dmamux.h @@ -0,0 +1,237 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_DMAMUX_REGISTERS_H__ +#define __HW_DMAMUX_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 DMAMUX + * + * DMA channel multiplexor + * + * Registers defined in this header file: + * - HW_DMAMUX_CHCFGn - Channel Configuration register + * + * - hw_dmamux_t - Struct containing all module registers. + */ + +#define HW_DMAMUX_INSTANCE_COUNT (1U) /*!< Number of instances of the DMAMUX module. */ + +/******************************************************************************* + * HW_DMAMUX_CHCFGn - Channel Configuration register + ******************************************************************************/ + +/*! + * @brief HW_DMAMUX_CHCFGn - Channel Configuration register (RW) + * + * Reset value: 0x00U + * + * Each of the DMA channels can be independently enabled/disabled and associated + * with one of the DMA slots (peripheral slots or always-on slots) in the + * system. Setting multiple CHCFG registers with the same source value will result in + * unpredictable behavior. Before changing the trigger or source settings, a DMA + * channel must be disabled via CHCFGn[ENBL]. + */ +typedef union _hw_dmamux_chcfgn +{ + uint8_t U; + struct _hw_dmamux_chcfgn_bitfields + { + uint8_t SOURCE : 6; /*!< [5:0] DMA Channel Source (Slot) */ + uint8_t TRIG : 1; /*!< [6] DMA Channel Trigger Enable */ + uint8_t ENBL : 1; /*!< [7] DMA Channel Enable */ + } B; +} hw_dmamux_chcfgn_t; + +/*! + * @name Constants and macros for entire DMAMUX_CHCFGn register + */ +/*@{*/ +#define HW_DMAMUX_CHCFGn_COUNT (16U) + +#define HW_DMAMUX_CHCFGn_ADDR(x, n) ((x) + 0x0U + (0x1U * (n))) + +#define HW_DMAMUX_CHCFGn(x, n) (*(__IO hw_dmamux_chcfgn_t *) HW_DMAMUX_CHCFGn_ADDR(x, n)) +#define HW_DMAMUX_CHCFGn_RD(x, n) (HW_DMAMUX_CHCFGn(x, n).U) +#define HW_DMAMUX_CHCFGn_WR(x, n, v) (HW_DMAMUX_CHCFGn(x, n).U = (v)) +#define HW_DMAMUX_CHCFGn_SET(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) | (v))) +#define HW_DMAMUX_CHCFGn_CLR(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) & ~(v))) +#define HW_DMAMUX_CHCFGn_TOG(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, HW_DMAMUX_CHCFGn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual DMAMUX_CHCFGn bitfields + */ + +/*! + * @name Register DMAMUX_CHCFGn, field SOURCE[5:0] (RW) + * + * Specifies which DMA source, if any, is routed to a particular DMA channel. + * See your device's chip configuration details for information about the + * peripherals and their slot numbers. + */ +/*@{*/ +#define BP_DMAMUX_CHCFGn_SOURCE (0U) /*!< Bit position for DMAMUX_CHCFGn_SOURCE. */ +#define BM_DMAMUX_CHCFGn_SOURCE (0x3FU) /*!< Bit mask for DMAMUX_CHCFGn_SOURCE. */ +#define BS_DMAMUX_CHCFGn_SOURCE (6U) /*!< Bit field size in bits for DMAMUX_CHCFGn_SOURCE. */ + +/*! @brief Read current value of the DMAMUX_CHCFGn_SOURCE field. */ +#define BR_DMAMUX_CHCFGn_SOURCE(x, n) (HW_DMAMUX_CHCFGn(x, n).B.SOURCE) + +/*! @brief Format value for bitfield DMAMUX_CHCFGn_SOURCE. */ +#define BF_DMAMUX_CHCFGn_SOURCE(v) ((uint8_t)((uint8_t)(v) << BP_DMAMUX_CHCFGn_SOURCE) & BM_DMAMUX_CHCFGn_SOURCE) + +/*! @brief Set the SOURCE field to a new value. */ +#define BW_DMAMUX_CHCFGn_SOURCE(x, n, v) (HW_DMAMUX_CHCFGn_WR(x, n, (HW_DMAMUX_CHCFGn_RD(x, n) & ~BM_DMAMUX_CHCFGn_SOURCE) | BF_DMAMUX_CHCFGn_SOURCE(v))) +/*@}*/ + +/*! + * @name Register DMAMUX_CHCFGn, field TRIG[6] (RW) + * + * Enables the periodic trigger capability for the triggered DMA channel. + * + * Values: + * - 0 - Triggering is disabled. If triggering is disabled and ENBL is set, the + * DMA Channel will simply route the specified source to the DMA channel. + * (Normal mode) + * - 1 - Triggering is enabled. If triggering is enabled and ENBL is set, the + * DMAMUX is in Periodic Trigger mode. + */ +/*@{*/ +#define BP_DMAMUX_CHCFGn_TRIG (6U) /*!< Bit position for DMAMUX_CHCFGn_TRIG. */ +#define BM_DMAMUX_CHCFGn_TRIG (0x40U) /*!< Bit mask for DMAMUX_CHCFGn_TRIG. */ +#define BS_DMAMUX_CHCFGn_TRIG (1U) /*!< Bit field size in bits for DMAMUX_CHCFGn_TRIG. */ + +/*! @brief Read current value of the DMAMUX_CHCFGn_TRIG field. */ +#define BR_DMAMUX_CHCFGn_TRIG(x, n) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_TRIG)) + +/*! @brief Format value for bitfield DMAMUX_CHCFGn_TRIG. */ +#define BF_DMAMUX_CHCFGn_TRIG(v) ((uint8_t)((uint8_t)(v) << BP_DMAMUX_CHCFGn_TRIG) & BM_DMAMUX_CHCFGn_TRIG) + +/*! @brief Set the TRIG field to a new value. */ +#define BW_DMAMUX_CHCFGn_TRIG(x, n, v) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_TRIG) = (v)) +/*@}*/ + +/*! + * @name Register DMAMUX_CHCFGn, field ENBL[7] (RW) + * + * Enables the DMA channel. + * + * Values: + * - 0 - DMA channel is disabled. This mode is primarily used during + * configuration of the DMAMux. The DMA has separate channel enables/disables, which + * should be used to disable or reconfigure a DMA channel. + * - 1 - DMA channel is enabled + */ +/*@{*/ +#define BP_DMAMUX_CHCFGn_ENBL (7U) /*!< Bit position for DMAMUX_CHCFGn_ENBL. */ +#define BM_DMAMUX_CHCFGn_ENBL (0x80U) /*!< Bit mask for DMAMUX_CHCFGn_ENBL. */ +#define BS_DMAMUX_CHCFGn_ENBL (1U) /*!< Bit field size in bits for DMAMUX_CHCFGn_ENBL. */ + +/*! @brief Read current value of the DMAMUX_CHCFGn_ENBL field. */ +#define BR_DMAMUX_CHCFGn_ENBL(x, n) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_ENBL)) + +/*! @brief Format value for bitfield DMAMUX_CHCFGn_ENBL. */ +#define BF_DMAMUX_CHCFGn_ENBL(v) ((uint8_t)((uint8_t)(v) << BP_DMAMUX_CHCFGn_ENBL) & BM_DMAMUX_CHCFGn_ENBL) + +/*! @brief Set the ENBL field to a new value. */ +#define BW_DMAMUX_CHCFGn_ENBL(x, n, v) (BITBAND_ACCESS8(HW_DMAMUX_CHCFGn_ADDR(x, n), BP_DMAMUX_CHCFGn_ENBL) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_dmamux_t - module struct + ******************************************************************************/ +/*! + * @brief All DMAMUX module registers. + */ +#pragma pack(1) +typedef struct _hw_dmamux +{ + __IO hw_dmamux_chcfgn_t CHCFGn[16]; /*!< [0x0] Channel Configuration register */ +} hw_dmamux_t; +#pragma pack() + +/*! @brief Macro to access all DMAMUX registers. */ +/*! @param x DMAMUX module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_DMAMUX(DMAMUX_BASE)</code>. */ +#define HW_DMAMUX(x) (*(hw_dmamux_t *)(x)) + +#endif /* __HW_DMAMUX_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ewm.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ewm.h new file mode 100644 index 0000000000..085a5d4cc9 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ewm.h @@ -0,0 +1,504 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_EWM_REGISTERS_H__ +#define __HW_EWM_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 EWM + * + * External Watchdog Monitor + * + * Registers defined in this header file: + * - HW_EWM_CTRL - Control Register + * - HW_EWM_SERV - Service Register + * - HW_EWM_CMPL - Compare Low Register + * - HW_EWM_CMPH - Compare High Register + * - HW_EWM_CLKPRESCALER - Clock Prescaler Register + * + * - hw_ewm_t - Struct containing all module registers. + */ + +#define HW_EWM_INSTANCE_COUNT (1U) /*!< Number of instances of the EWM module. */ + +/******************************************************************************* + * HW_EWM_CTRL - Control Register + ******************************************************************************/ + +/*! + * @brief HW_EWM_CTRL - Control Register (RW) + * + * Reset value: 0x00U + * + * The CTRL register is cleared by any reset. INEN, ASSIN and EWMEN bits can be + * written once after a CPU reset. Modifying these bits more than once, generates + * a bus transfer error. + */ +typedef union _hw_ewm_ctrl +{ + uint8_t U; + struct _hw_ewm_ctrl_bitfields + { + uint8_t EWMEN : 1; /*!< [0] EWM enable. */ + uint8_t ASSIN : 1; /*!< [1] EWM_in's Assertion State Select. */ + uint8_t INEN : 1; /*!< [2] Input Enable. */ + uint8_t INTEN : 1; /*!< [3] Interrupt Enable. */ + uint8_t RESERVED0 : 4; /*!< [7:4] */ + } B; +} hw_ewm_ctrl_t; + +/*! + * @name Constants and macros for entire EWM_CTRL register + */ +/*@{*/ +#define HW_EWM_CTRL_ADDR(x) ((x) + 0x0U) + +#define HW_EWM_CTRL(x) (*(__IO hw_ewm_ctrl_t *) HW_EWM_CTRL_ADDR(x)) +#define HW_EWM_CTRL_RD(x) (HW_EWM_CTRL(x).U) +#define HW_EWM_CTRL_WR(x, v) (HW_EWM_CTRL(x).U = (v)) +#define HW_EWM_CTRL_SET(x, v) (HW_EWM_CTRL_WR(x, HW_EWM_CTRL_RD(x) | (v))) +#define HW_EWM_CTRL_CLR(x, v) (HW_EWM_CTRL_WR(x, HW_EWM_CTRL_RD(x) & ~(v))) +#define HW_EWM_CTRL_TOG(x, v) (HW_EWM_CTRL_WR(x, HW_EWM_CTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual EWM_CTRL bitfields + */ + +/*! + * @name Register EWM_CTRL, field EWMEN[0] (RW) + * + * This bit when set, enables the EWM module. This resets the EWM counter to + * zero and deasserts the EWM_out signal. Clearing EWMEN bit disables the EWM, and + * therefore it cannot be enabled until a reset occurs, due to the write-once + * nature of this bit. + */ +/*@{*/ +#define BP_EWM_CTRL_EWMEN (0U) /*!< Bit position for EWM_CTRL_EWMEN. */ +#define BM_EWM_CTRL_EWMEN (0x01U) /*!< Bit mask for EWM_CTRL_EWMEN. */ +#define BS_EWM_CTRL_EWMEN (1U) /*!< Bit field size in bits for EWM_CTRL_EWMEN. */ + +/*! @brief Read current value of the EWM_CTRL_EWMEN field. */ +#define BR_EWM_CTRL_EWMEN(x) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_EWMEN)) + +/*! @brief Format value for bitfield EWM_CTRL_EWMEN. */ +#define BF_EWM_CTRL_EWMEN(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CTRL_EWMEN) & BM_EWM_CTRL_EWMEN) + +/*! @brief Set the EWMEN field to a new value. */ +#define BW_EWM_CTRL_EWMEN(x, v) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_EWMEN) = (v)) +/*@}*/ + +/*! + * @name Register EWM_CTRL, field ASSIN[1] (RW) + * + * Default assert state of the EWM_in signal is logic zero. Setting ASSIN bit + * inverts the assert state to a logic one. + */ +/*@{*/ +#define BP_EWM_CTRL_ASSIN (1U) /*!< Bit position for EWM_CTRL_ASSIN. */ +#define BM_EWM_CTRL_ASSIN (0x02U) /*!< Bit mask for EWM_CTRL_ASSIN. */ +#define BS_EWM_CTRL_ASSIN (1U) /*!< Bit field size in bits for EWM_CTRL_ASSIN. */ + +/*! @brief Read current value of the EWM_CTRL_ASSIN field. */ +#define BR_EWM_CTRL_ASSIN(x) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_ASSIN)) + +/*! @brief Format value for bitfield EWM_CTRL_ASSIN. */ +#define BF_EWM_CTRL_ASSIN(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CTRL_ASSIN) & BM_EWM_CTRL_ASSIN) + +/*! @brief Set the ASSIN field to a new value. */ +#define BW_EWM_CTRL_ASSIN(x, v) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_ASSIN) = (v)) +/*@}*/ + +/*! + * @name Register EWM_CTRL, field INEN[2] (RW) + * + * This bit when set, enables the EWM_in port. + */ +/*@{*/ +#define BP_EWM_CTRL_INEN (2U) /*!< Bit position for EWM_CTRL_INEN. */ +#define BM_EWM_CTRL_INEN (0x04U) /*!< Bit mask for EWM_CTRL_INEN. */ +#define BS_EWM_CTRL_INEN (1U) /*!< Bit field size in bits for EWM_CTRL_INEN. */ + +/*! @brief Read current value of the EWM_CTRL_INEN field. */ +#define BR_EWM_CTRL_INEN(x) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_INEN)) + +/*! @brief Format value for bitfield EWM_CTRL_INEN. */ +#define BF_EWM_CTRL_INEN(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CTRL_INEN) & BM_EWM_CTRL_INEN) + +/*! @brief Set the INEN field to a new value. */ +#define BW_EWM_CTRL_INEN(x, v) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_INEN) = (v)) +/*@}*/ + +/*! + * @name Register EWM_CTRL, field INTEN[3] (RW) + * + * This bit when set and EWM_out is asserted, an interrupt request is generated. + * To de-assert interrupt request, user should clear this bit by writing 0. + */ +/*@{*/ +#define BP_EWM_CTRL_INTEN (3U) /*!< Bit position for EWM_CTRL_INTEN. */ +#define BM_EWM_CTRL_INTEN (0x08U) /*!< Bit mask for EWM_CTRL_INTEN. */ +#define BS_EWM_CTRL_INTEN (1U) /*!< Bit field size in bits for EWM_CTRL_INTEN. */ + +/*! @brief Read current value of the EWM_CTRL_INTEN field. */ +#define BR_EWM_CTRL_INTEN(x) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_INTEN)) + +/*! @brief Format value for bitfield EWM_CTRL_INTEN. */ +#define BF_EWM_CTRL_INTEN(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CTRL_INTEN) & BM_EWM_CTRL_INTEN) + +/*! @brief Set the INTEN field to a new value. */ +#define BW_EWM_CTRL_INTEN(x, v) (BITBAND_ACCESS8(HW_EWM_CTRL_ADDR(x), BP_EWM_CTRL_INTEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_EWM_SERV - Service Register + ******************************************************************************/ + +/*! + * @brief HW_EWM_SERV - Service Register (WORZ) + * + * Reset value: 0x00U + * + * The SERV register provides the interface from the CPU to the EWM module. It + * is write-only and reads of this register return zero. + */ +typedef union _hw_ewm_serv +{ + uint8_t U; + struct _hw_ewm_serv_bitfields + { + uint8_t SERVICE : 8; /*!< [7:0] */ + } B; +} hw_ewm_serv_t; + +/*! + * @name Constants and macros for entire EWM_SERV register + */ +/*@{*/ +#define HW_EWM_SERV_ADDR(x) ((x) + 0x1U) + +#define HW_EWM_SERV(x) (*(__O hw_ewm_serv_t *) HW_EWM_SERV_ADDR(x)) +#define HW_EWM_SERV_RD(x) (HW_EWM_SERV(x).U) +#define HW_EWM_SERV_WR(x, v) (HW_EWM_SERV(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual EWM_SERV bitfields + */ + +/*! + * @name Register EWM_SERV, field SERVICE[7:0] (WORZ) + * + * The EWM service mechanism requires the CPU to write two values to the SERV + * register: a first data byte of 0xB4, followed by a second data byte of 0x2C. The + * EWM service is illegal if either of the following conditions is true. The + * first or second data byte is not written correctly. The second data byte is not + * written within a fixed number of peripheral bus cycles of the first data byte. + * This fixed number of cycles is called EWM_service_time. + */ +/*@{*/ +#define BP_EWM_SERV_SERVICE (0U) /*!< Bit position for EWM_SERV_SERVICE. */ +#define BM_EWM_SERV_SERVICE (0xFFU) /*!< Bit mask for EWM_SERV_SERVICE. */ +#define BS_EWM_SERV_SERVICE (8U) /*!< Bit field size in bits for EWM_SERV_SERVICE. */ + +/*! @brief Format value for bitfield EWM_SERV_SERVICE. */ +#define BF_EWM_SERV_SERVICE(v) ((uint8_t)((uint8_t)(v) << BP_EWM_SERV_SERVICE) & BM_EWM_SERV_SERVICE) + +/*! @brief Set the SERVICE field to a new value. */ +#define BW_EWM_SERV_SERVICE(x, v) (HW_EWM_SERV_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_EWM_CMPL - Compare Low Register + ******************************************************************************/ + +/*! + * @brief HW_EWM_CMPL - Compare Low Register (RW) + * + * Reset value: 0x00U + * + * The CMPL register is reset to zero after a CPU reset. This provides no + * minimum time for the CPU to service the EWM counter. This register can be written + * only once after a CPU reset. Writing this register more than once generates a + * bus transfer error. + */ +typedef union _hw_ewm_cmpl +{ + uint8_t U; + struct _hw_ewm_cmpl_bitfields + { + uint8_t COMPAREL : 8; /*!< [7:0] */ + } B; +} hw_ewm_cmpl_t; + +/*! + * @name Constants and macros for entire EWM_CMPL register + */ +/*@{*/ +#define HW_EWM_CMPL_ADDR(x) ((x) + 0x2U) + +#define HW_EWM_CMPL(x) (*(__IO hw_ewm_cmpl_t *) HW_EWM_CMPL_ADDR(x)) +#define HW_EWM_CMPL_RD(x) (HW_EWM_CMPL(x).U) +#define HW_EWM_CMPL_WR(x, v) (HW_EWM_CMPL(x).U = (v)) +#define HW_EWM_CMPL_SET(x, v) (HW_EWM_CMPL_WR(x, HW_EWM_CMPL_RD(x) | (v))) +#define HW_EWM_CMPL_CLR(x, v) (HW_EWM_CMPL_WR(x, HW_EWM_CMPL_RD(x) & ~(v))) +#define HW_EWM_CMPL_TOG(x, v) (HW_EWM_CMPL_WR(x, HW_EWM_CMPL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual EWM_CMPL bitfields + */ + +/*! + * @name Register EWM_CMPL, field COMPAREL[7:0] (RW) + * + * To prevent runaway code from changing this field, software should write to + * this field after a CPU reset even if the (default) minimum service time is + * required. + */ +/*@{*/ +#define BP_EWM_CMPL_COMPAREL (0U) /*!< Bit position for EWM_CMPL_COMPAREL. */ +#define BM_EWM_CMPL_COMPAREL (0xFFU) /*!< Bit mask for EWM_CMPL_COMPAREL. */ +#define BS_EWM_CMPL_COMPAREL (8U) /*!< Bit field size in bits for EWM_CMPL_COMPAREL. */ + +/*! @brief Read current value of the EWM_CMPL_COMPAREL field. */ +#define BR_EWM_CMPL_COMPAREL(x) (HW_EWM_CMPL(x).U) + +/*! @brief Format value for bitfield EWM_CMPL_COMPAREL. */ +#define BF_EWM_CMPL_COMPAREL(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CMPL_COMPAREL) & BM_EWM_CMPL_COMPAREL) + +/*! @brief Set the COMPAREL field to a new value. */ +#define BW_EWM_CMPL_COMPAREL(x, v) (HW_EWM_CMPL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_EWM_CMPH - Compare High Register + ******************************************************************************/ + +/*! + * @brief HW_EWM_CMPH - Compare High Register (RW) + * + * Reset value: 0xFFU + * + * The CMPH register is reset to 0xFF after a CPU reset. This provides a maximum + * of 256 clocks time, for the CPU to service the EWM counter. This register can + * be written only once after a CPU reset. Writing this register more than once + * generates a bus transfer error. The valid values for CMPH are up to 0xFE + * because the EWM counter never expires when CMPH = 0xFF. The expiration happens only + * if EWM counter is greater than CMPH. + */ +typedef union _hw_ewm_cmph +{ + uint8_t U; + struct _hw_ewm_cmph_bitfields + { + uint8_t COMPAREH : 8; /*!< [7:0] */ + } B; +} hw_ewm_cmph_t; + +/*! + * @name Constants and macros for entire EWM_CMPH register + */ +/*@{*/ +#define HW_EWM_CMPH_ADDR(x) ((x) + 0x3U) + +#define HW_EWM_CMPH(x) (*(__IO hw_ewm_cmph_t *) HW_EWM_CMPH_ADDR(x)) +#define HW_EWM_CMPH_RD(x) (HW_EWM_CMPH(x).U) +#define HW_EWM_CMPH_WR(x, v) (HW_EWM_CMPH(x).U = (v)) +#define HW_EWM_CMPH_SET(x, v) (HW_EWM_CMPH_WR(x, HW_EWM_CMPH_RD(x) | (v))) +#define HW_EWM_CMPH_CLR(x, v) (HW_EWM_CMPH_WR(x, HW_EWM_CMPH_RD(x) & ~(v))) +#define HW_EWM_CMPH_TOG(x, v) (HW_EWM_CMPH_WR(x, HW_EWM_CMPH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual EWM_CMPH bitfields + */ + +/*! + * @name Register EWM_CMPH, field COMPAREH[7:0] (RW) + * + * To prevent runaway code from changing this field, software should write to + * this field after a CPU reset even if the (default) maximum service time is + * required. + */ +/*@{*/ +#define BP_EWM_CMPH_COMPAREH (0U) /*!< Bit position for EWM_CMPH_COMPAREH. */ +#define BM_EWM_CMPH_COMPAREH (0xFFU) /*!< Bit mask for EWM_CMPH_COMPAREH. */ +#define BS_EWM_CMPH_COMPAREH (8U) /*!< Bit field size in bits for EWM_CMPH_COMPAREH. */ + +/*! @brief Read current value of the EWM_CMPH_COMPAREH field. */ +#define BR_EWM_CMPH_COMPAREH(x) (HW_EWM_CMPH(x).U) + +/*! @brief Format value for bitfield EWM_CMPH_COMPAREH. */ +#define BF_EWM_CMPH_COMPAREH(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CMPH_COMPAREH) & BM_EWM_CMPH_COMPAREH) + +/*! @brief Set the COMPAREH field to a new value. */ +#define BW_EWM_CMPH_COMPAREH(x, v) (HW_EWM_CMPH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_EWM_CLKPRESCALER - Clock Prescaler Register + ******************************************************************************/ + +/*! + * @brief HW_EWM_CLKPRESCALER - Clock Prescaler Register (RW) + * + * Reset value: 0x00U + * + * This CLKPRESCALER register is reset to 0x00 after a CPU reset. This register + * can be written only once after a CPU reset. Writing this register more than + * once generates a bus transfer error. Write the required prescaler value before + * enabling the EWM. The implementation of this register is chip-specific. See the + * Chip Configuration details. + */ +typedef union _hw_ewm_clkprescaler +{ + uint8_t U; + struct _hw_ewm_clkprescaler_bitfields + { + uint8_t CLK_DIV : 8; /*!< [7:0] */ + } B; +} hw_ewm_clkprescaler_t; + +/*! + * @name Constants and macros for entire EWM_CLKPRESCALER register + */ +/*@{*/ +#define HW_EWM_CLKPRESCALER_ADDR(x) ((x) + 0x5U) + +#define HW_EWM_CLKPRESCALER(x) (*(__IO hw_ewm_clkprescaler_t *) HW_EWM_CLKPRESCALER_ADDR(x)) +#define HW_EWM_CLKPRESCALER_RD(x) (HW_EWM_CLKPRESCALER(x).U) +#define HW_EWM_CLKPRESCALER_WR(x, v) (HW_EWM_CLKPRESCALER(x).U = (v)) +#define HW_EWM_CLKPRESCALER_SET(x, v) (HW_EWM_CLKPRESCALER_WR(x, HW_EWM_CLKPRESCALER_RD(x) | (v))) +#define HW_EWM_CLKPRESCALER_CLR(x, v) (HW_EWM_CLKPRESCALER_WR(x, HW_EWM_CLKPRESCALER_RD(x) & ~(v))) +#define HW_EWM_CLKPRESCALER_TOG(x, v) (HW_EWM_CLKPRESCALER_WR(x, HW_EWM_CLKPRESCALER_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual EWM_CLKPRESCALER bitfields + */ + +/*! + * @name Register EWM_CLKPRESCALER, field CLK_DIV[7:0] (RW) + * + * Selected low power source for running the EWM counter can be prescaled as + * below. Prescaled clock frequency = low power clock source frequency/ ( 1+ CLK_DIV + * ) + */ +/*@{*/ +#define BP_EWM_CLKPRESCALER_CLK_DIV (0U) /*!< Bit position for EWM_CLKPRESCALER_CLK_DIV. */ +#define BM_EWM_CLKPRESCALER_CLK_DIV (0xFFU) /*!< Bit mask for EWM_CLKPRESCALER_CLK_DIV. */ +#define BS_EWM_CLKPRESCALER_CLK_DIV (8U) /*!< Bit field size in bits for EWM_CLKPRESCALER_CLK_DIV. */ + +/*! @brief Read current value of the EWM_CLKPRESCALER_CLK_DIV field. */ +#define BR_EWM_CLKPRESCALER_CLK_DIV(x) (HW_EWM_CLKPRESCALER(x).U) + +/*! @brief Format value for bitfield EWM_CLKPRESCALER_CLK_DIV. */ +#define BF_EWM_CLKPRESCALER_CLK_DIV(v) ((uint8_t)((uint8_t)(v) << BP_EWM_CLKPRESCALER_CLK_DIV) & BM_EWM_CLKPRESCALER_CLK_DIV) + +/*! @brief Set the CLK_DIV field to a new value. */ +#define BW_EWM_CLKPRESCALER_CLK_DIV(x, v) (HW_EWM_CLKPRESCALER_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * hw_ewm_t - module struct + ******************************************************************************/ +/*! + * @brief All EWM module registers. + */ +#pragma pack(1) +typedef struct _hw_ewm +{ + __IO hw_ewm_ctrl_t CTRL; /*!< [0x0] Control Register */ + __O hw_ewm_serv_t SERV; /*!< [0x1] Service Register */ + __IO hw_ewm_cmpl_t CMPL; /*!< [0x2] Compare Low Register */ + __IO hw_ewm_cmph_t CMPH; /*!< [0x3] Compare High Register */ + uint8_t _reserved0[1]; + __IO hw_ewm_clkprescaler_t CLKPRESCALER; /*!< [0x5] Clock Prescaler Register */ +} hw_ewm_t; +#pragma pack() + +/*! @brief Macro to access all EWM registers. */ +/*! @param x EWM module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_EWM(EWM_BASE)</code>. */ +#define HW_EWM(x) (*(hw_ewm_t *)(x)) + +#endif /* __HW_EWM_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fb.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fb.h new file mode 100644 index 0000000000..c079b4f237 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fb.h @@ -0,0 +1,904 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_FB_REGISTERS_H__ +#define __HW_FB_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 FB + * + * FlexBus external bus interface + * + * Registers defined in this header file: + * - HW_FB_CSARn - Chip Select Address Register + * - HW_FB_CSMRn - Chip Select Mask Register + * - HW_FB_CSCRn - Chip Select Control Register + * - HW_FB_CSPMCR - Chip Select port Multiplexing Control Register + * + * - hw_fb_t - Struct containing all module registers. + */ + +#define HW_FB_INSTANCE_COUNT (1U) /*!< Number of instances of the FB module. */ + +/******************************************************************************* + * HW_FB_CSARn - Chip Select Address Register + ******************************************************************************/ + +/*! + * @brief HW_FB_CSARn - Chip Select Address Register (RW) + * + * Reset value: 0x00000000U + * + * Specifies the associated chip-select's base address. + */ +typedef union _hw_fb_csarn +{ + uint32_t U; + struct _hw_fb_csarn_bitfields + { + uint32_t RESERVED0 : 16; /*!< [15:0] */ + uint32_t BA : 16; /*!< [31:16] Base Address */ + } B; +} hw_fb_csarn_t; + +/*! + * @name Constants and macros for entire FB_CSARn register + */ +/*@{*/ +#define HW_FB_CSARn_COUNT (6U) + +#define HW_FB_CSARn_ADDR(x, n) ((x) + 0x0U + (0xCU * (n))) + +#define HW_FB_CSARn(x, n) (*(__IO hw_fb_csarn_t *) HW_FB_CSARn_ADDR(x, n)) +#define HW_FB_CSARn_RD(x, n) (HW_FB_CSARn(x, n).U) +#define HW_FB_CSARn_WR(x, n, v) (HW_FB_CSARn(x, n).U = (v)) +#define HW_FB_CSARn_SET(x, n, v) (HW_FB_CSARn_WR(x, n, HW_FB_CSARn_RD(x, n) | (v))) +#define HW_FB_CSARn_CLR(x, n, v) (HW_FB_CSARn_WR(x, n, HW_FB_CSARn_RD(x, n) & ~(v))) +#define HW_FB_CSARn_TOG(x, n, v) (HW_FB_CSARn_WR(x, n, HW_FB_CSARn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FB_CSARn bitfields + */ + +/*! + * @name Register FB_CSARn, field BA[31:16] (RW) + * + * Defines the base address for memory dedicated to the associated chip-select. + * BA is compared to bits 31-16 on the internal address bus to determine if the + * associated chip-select's memory is being accessed. Because the FlexBus module + * is one of the slaves connected to the crossbar switch, it is only accessible + * within a certain memory range. See the chip memory map for the applicable + * FlexBus "expansion" address range for which the chip-selects can be active. Set the + * CSARn and CSMRn registers appropriately before accessing this region. + */ +/*@{*/ +#define BP_FB_CSARn_BA (16U) /*!< Bit position for FB_CSARn_BA. */ +#define BM_FB_CSARn_BA (0xFFFF0000U) /*!< Bit mask for FB_CSARn_BA. */ +#define BS_FB_CSARn_BA (16U) /*!< Bit field size in bits for FB_CSARn_BA. */ + +/*! @brief Read current value of the FB_CSARn_BA field. */ +#define BR_FB_CSARn_BA(x, n) (HW_FB_CSARn(x, n).B.BA) + +/*! @brief Format value for bitfield FB_CSARn_BA. */ +#define BF_FB_CSARn_BA(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSARn_BA) & BM_FB_CSARn_BA) + +/*! @brief Set the BA field to a new value. */ +#define BW_FB_CSARn_BA(x, n, v) (HW_FB_CSARn_WR(x, n, (HW_FB_CSARn_RD(x, n) & ~BM_FB_CSARn_BA) | BF_FB_CSARn_BA(v))) +/*@}*/ +/******************************************************************************* + * HW_FB_CSMRn - Chip Select Mask Register + ******************************************************************************/ + +/*! + * @brief HW_FB_CSMRn - Chip Select Mask Register (RW) + * + * Reset value: 0x00000000U + * + * Specifies the address mask and allowable access types for the associated + * chip-select. + */ +typedef union _hw_fb_csmrn +{ + uint32_t U; + struct _hw_fb_csmrn_bitfields + { + uint32_t V : 1; /*!< [0] Valid */ + uint32_t RESERVED0 : 7; /*!< [7:1] */ + uint32_t WP : 1; /*!< [8] Write Protect */ + uint32_t RESERVED1 : 7; /*!< [15:9] */ + uint32_t BAM : 16; /*!< [31:16] Base Address Mask */ + } B; +} hw_fb_csmrn_t; + +/*! + * @name Constants and macros for entire FB_CSMRn register + */ +/*@{*/ +#define HW_FB_CSMRn_COUNT (6U) + +#define HW_FB_CSMRn_ADDR(x, n) ((x) + 0x4U + (0xCU * (n))) + +#define HW_FB_CSMRn(x, n) (*(__IO hw_fb_csmrn_t *) HW_FB_CSMRn_ADDR(x, n)) +#define HW_FB_CSMRn_RD(x, n) (HW_FB_CSMRn(x, n).U) +#define HW_FB_CSMRn_WR(x, n, v) (HW_FB_CSMRn(x, n).U = (v)) +#define HW_FB_CSMRn_SET(x, n, v) (HW_FB_CSMRn_WR(x, n, HW_FB_CSMRn_RD(x, n) | (v))) +#define HW_FB_CSMRn_CLR(x, n, v) (HW_FB_CSMRn_WR(x, n, HW_FB_CSMRn_RD(x, n) & ~(v))) +#define HW_FB_CSMRn_TOG(x, n, v) (HW_FB_CSMRn_WR(x, n, HW_FB_CSMRn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FB_CSMRn bitfields + */ + +/*! + * @name Register FB_CSMRn, field V[0] (RW) + * + * Specifies whether the corresponding CSAR, CSMR, and CSCR contents are valid. + * Programmed chip-selects do not assert until the V bit is 1b (except for + * FB_CS0, which acts as the global chip-select). At reset, FB_CS0 will fire for any + * access to the FlexBus memory region. CSMR0[V] must be set as part of the chip + * select initialization sequence to allow other chip selects to function as + * programmed. + * + * Values: + * - 0 - Chip-select is invalid. + * - 1 - Chip-select is valid. + */ +/*@{*/ +#define BP_FB_CSMRn_V (0U) /*!< Bit position for FB_CSMRn_V. */ +#define BM_FB_CSMRn_V (0x00000001U) /*!< Bit mask for FB_CSMRn_V. */ +#define BS_FB_CSMRn_V (1U) /*!< Bit field size in bits for FB_CSMRn_V. */ + +/*! @brief Read current value of the FB_CSMRn_V field. */ +#define BR_FB_CSMRn_V(x, n) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(x, n), BP_FB_CSMRn_V)) + +/*! @brief Format value for bitfield FB_CSMRn_V. */ +#define BF_FB_CSMRn_V(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSMRn_V) & BM_FB_CSMRn_V) + +/*! @brief Set the V field to a new value. */ +#define BW_FB_CSMRn_V(x, n, v) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(x, n), BP_FB_CSMRn_V) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSMRn, field WP[8] (RW) + * + * Controls write accesses to the address range in the corresponding CSAR. + * + * Values: + * - 0 - Write accesses are allowed. + * - 1 - Write accesses are not allowed. Attempting to write to the range of + * addresses for which the WP bit is set results in a bus error termination of + * the internal cycle and no external cycle. + */ +/*@{*/ +#define BP_FB_CSMRn_WP (8U) /*!< Bit position for FB_CSMRn_WP. */ +#define BM_FB_CSMRn_WP (0x00000100U) /*!< Bit mask for FB_CSMRn_WP. */ +#define BS_FB_CSMRn_WP (1U) /*!< Bit field size in bits for FB_CSMRn_WP. */ + +/*! @brief Read current value of the FB_CSMRn_WP field. */ +#define BR_FB_CSMRn_WP(x, n) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(x, n), BP_FB_CSMRn_WP)) + +/*! @brief Format value for bitfield FB_CSMRn_WP. */ +#define BF_FB_CSMRn_WP(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSMRn_WP) & BM_FB_CSMRn_WP) + +/*! @brief Set the WP field to a new value. */ +#define BW_FB_CSMRn_WP(x, n, v) (BITBAND_ACCESS32(HW_FB_CSMRn_ADDR(x, n), BP_FB_CSMRn_WP) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSMRn, field BAM[31:16] (RW) + * + * Defines the associated chip-select's block size by masking address bits. + * + * Values: + * - 0 - The corresponding address bit in CSAR is used in the chip-select decode. + * - 1 - The corresponding address bit in CSAR is a don't care in the + * chip-select decode. + */ +/*@{*/ +#define BP_FB_CSMRn_BAM (16U) /*!< Bit position for FB_CSMRn_BAM. */ +#define BM_FB_CSMRn_BAM (0xFFFF0000U) /*!< Bit mask for FB_CSMRn_BAM. */ +#define BS_FB_CSMRn_BAM (16U) /*!< Bit field size in bits for FB_CSMRn_BAM. */ + +/*! @brief Read current value of the FB_CSMRn_BAM field. */ +#define BR_FB_CSMRn_BAM(x, n) (HW_FB_CSMRn(x, n).B.BAM) + +/*! @brief Format value for bitfield FB_CSMRn_BAM. */ +#define BF_FB_CSMRn_BAM(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSMRn_BAM) & BM_FB_CSMRn_BAM) + +/*! @brief Set the BAM field to a new value. */ +#define BW_FB_CSMRn_BAM(x, n, v) (HW_FB_CSMRn_WR(x, n, (HW_FB_CSMRn_RD(x, n) & ~BM_FB_CSMRn_BAM) | BF_FB_CSMRn_BAM(v))) +/*@}*/ +/******************************************************************************* + * HW_FB_CSCRn - Chip Select Control Register + ******************************************************************************/ + +/*! + * @brief HW_FB_CSCRn - Chip Select Control Register (RW) + * + * Reset value: 0x003FFC00U + * + * Controls the auto-acknowledge, address setup and hold times, port size, burst + * capability, and number of wait states for the associated chip select. To + * support the global chip-select (FB_CS0), the CSCR0 reset values differ from the + * other CSCRs. The reset value of CSCR0 is as follows: Bits 31-24 are 0b Bit 23-3 + * are chip-dependent Bits 3-0 are 0b See the chip configuration details for your + * particular chip for information on the exact CSCR0 reset value. + */ +typedef union _hw_fb_cscrn +{ + uint32_t U; + struct _hw_fb_cscrn_bitfields + { + uint32_t RESERVED0 : 3; /*!< [2:0] */ + uint32_t BSTW : 1; /*!< [3] Burst-Write Enable */ + uint32_t BSTR : 1; /*!< [4] Burst-Read Enable */ + uint32_t BEM : 1; /*!< [5] Byte-Enable Mode */ + uint32_t PS : 2; /*!< [7:6] Port Size */ + uint32_t AA : 1; /*!< [8] Auto-Acknowledge Enable */ + uint32_t BLS : 1; /*!< [9] Byte-Lane Shift */ + uint32_t WS : 6; /*!< [15:10] Wait States */ + uint32_t WRAH : 2; /*!< [17:16] Write Address Hold or Deselect */ + uint32_t RDAH : 2; /*!< [19:18] Read Address Hold or Deselect */ + uint32_t ASET : 2; /*!< [21:20] Address Setup */ + uint32_t EXTS : 1; /*!< [22] */ + uint32_t SWSEN : 1; /*!< [23] Secondary Wait State Enable */ + uint32_t RESERVED1 : 2; /*!< [25:24] */ + uint32_t SWS : 6; /*!< [31:26] Secondary Wait States */ + } B; +} hw_fb_cscrn_t; + +/*! + * @name Constants and macros for entire FB_CSCRn register + */ +/*@{*/ +#define HW_FB_CSCRn_COUNT (6U) + +#define HW_FB_CSCRn_ADDR(x, n) ((x) + 0x8U + (0xCU * (n))) + +#define HW_FB_CSCRn(x, n) (*(__IO hw_fb_cscrn_t *) HW_FB_CSCRn_ADDR(x, n)) +#define HW_FB_CSCRn_RD(x, n) (HW_FB_CSCRn(x, n).U) +#define HW_FB_CSCRn_WR(x, n, v) (HW_FB_CSCRn(x, n).U = (v)) +#define HW_FB_CSCRn_SET(x, n, v) (HW_FB_CSCRn_WR(x, n, HW_FB_CSCRn_RD(x, n) | (v))) +#define HW_FB_CSCRn_CLR(x, n, v) (HW_FB_CSCRn_WR(x, n, HW_FB_CSCRn_RD(x, n) & ~(v))) +#define HW_FB_CSCRn_TOG(x, n, v) (HW_FB_CSCRn_WR(x, n, HW_FB_CSCRn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FB_CSCRn bitfields + */ + +/*! + * @name Register FB_CSCRn, field BSTW[3] (RW) + * + * Specifies whether burst writes are enabled for memory associated with each + * chip select. + * + * Values: + * - 0 - Disabled. Data exceeding the specified port size is broken into + * individual, port-sized, non-burst writes. For example, a 32-bit write to an 8-bit + * port takes four byte writes. + * - 1 - Enabled. Enables burst write of data larger than the specified port + * size, including 32-bit writes to 8- and 16-bit ports, 16-bit writes to 8-bit + * ports, and line writes to 8-, 16-, and 32-bit ports. + */ +/*@{*/ +#define BP_FB_CSCRn_BSTW (3U) /*!< Bit position for FB_CSCRn_BSTW. */ +#define BM_FB_CSCRn_BSTW (0x00000008U) /*!< Bit mask for FB_CSCRn_BSTW. */ +#define BS_FB_CSCRn_BSTW (1U) /*!< Bit field size in bits for FB_CSCRn_BSTW. */ + +/*! @brief Read current value of the FB_CSCRn_BSTW field. */ +#define BR_FB_CSCRn_BSTW(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BSTW)) + +/*! @brief Format value for bitfield FB_CSCRn_BSTW. */ +#define BF_FB_CSCRn_BSTW(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_BSTW) & BM_FB_CSCRn_BSTW) + +/*! @brief Set the BSTW field to a new value. */ +#define BW_FB_CSCRn_BSTW(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BSTW) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field BSTR[4] (RW) + * + * Specifies whether burst reads are enabled for memory associated with each + * chip select. + * + * Values: + * - 0 - Disabled. Data exceeding the specified port size is broken into + * individual, port-sized, non-burst reads. For example, a 32-bit read from an 8-bit + * port is broken into four 8-bit reads. + * - 1 - Enabled. Enables data burst reads larger than the specified port size, + * including 32-bit reads from 8- and 16-bit ports, 16-bit reads from 8-bit + * ports, and line reads from 8-, 16-, and 32-bit ports. + */ +/*@{*/ +#define BP_FB_CSCRn_BSTR (4U) /*!< Bit position for FB_CSCRn_BSTR. */ +#define BM_FB_CSCRn_BSTR (0x00000010U) /*!< Bit mask for FB_CSCRn_BSTR. */ +#define BS_FB_CSCRn_BSTR (1U) /*!< Bit field size in bits for FB_CSCRn_BSTR. */ + +/*! @brief Read current value of the FB_CSCRn_BSTR field. */ +#define BR_FB_CSCRn_BSTR(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BSTR)) + +/*! @brief Format value for bitfield FB_CSCRn_BSTR. */ +#define BF_FB_CSCRn_BSTR(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_BSTR) & BM_FB_CSCRn_BSTR) + +/*! @brief Set the BSTR field to a new value. */ +#define BW_FB_CSCRn_BSTR(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BSTR) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field BEM[5] (RW) + * + * Specifies whether the corresponding FB_BE is asserted for read accesses. + * Certain memories have byte enables that must be asserted during reads and writes. + * Write 1b to the BEM bit in the relevant CSCR to provide the appropriate mode + * of byte enable support for these SRAMs. + * + * Values: + * - 0 - FB_BE is asserted for data write only. + * - 1 - FB_BE is asserted for data read and write accesses. + */ +/*@{*/ +#define BP_FB_CSCRn_BEM (5U) /*!< Bit position for FB_CSCRn_BEM. */ +#define BM_FB_CSCRn_BEM (0x00000020U) /*!< Bit mask for FB_CSCRn_BEM. */ +#define BS_FB_CSCRn_BEM (1U) /*!< Bit field size in bits for FB_CSCRn_BEM. */ + +/*! @brief Read current value of the FB_CSCRn_BEM field. */ +#define BR_FB_CSCRn_BEM(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BEM)) + +/*! @brief Format value for bitfield FB_CSCRn_BEM. */ +#define BF_FB_CSCRn_BEM(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_BEM) & BM_FB_CSCRn_BEM) + +/*! @brief Set the BEM field to a new value. */ +#define BW_FB_CSCRn_BEM(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BEM) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field PS[7:6] (RW) + * + * Specifies the data port width of the associated chip-select, and determines + * where data is driven during write cycles and where data is sampled during read + * cycles. + * + * Values: + * - 00 - 32-bit port size. Valid data is sampled and driven on FB_D[31:0]. + * - 01 - 8-bit port size. Valid data is sampled and driven on FB_D[31:24] when + * BLS is 0b, or FB_D[7:0] when BLS is 1b. + */ +/*@{*/ +#define BP_FB_CSCRn_PS (6U) /*!< Bit position for FB_CSCRn_PS. */ +#define BM_FB_CSCRn_PS (0x000000C0U) /*!< Bit mask for FB_CSCRn_PS. */ +#define BS_FB_CSCRn_PS (2U) /*!< Bit field size in bits for FB_CSCRn_PS. */ + +/*! @brief Read current value of the FB_CSCRn_PS field. */ +#define BR_FB_CSCRn_PS(x, n) (HW_FB_CSCRn(x, n).B.PS) + +/*! @brief Format value for bitfield FB_CSCRn_PS. */ +#define BF_FB_CSCRn_PS(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_PS) & BM_FB_CSCRn_PS) + +/*! @brief Set the PS field to a new value. */ +#define BW_FB_CSCRn_PS(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_PS) | BF_FB_CSCRn_PS(v))) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field AA[8] (RW) + * + * Asserts the internal transfer acknowledge for accesses specified by the + * chip-select address. If AA is 1b for a corresponding FB_CSn and the external system + * asserts an external FB_TA before the wait-state countdown asserts the + * internal FB_TA, the cycle is terminated. Burst cycles increment the address bus + * between each internal termination. This field must be 1b if CSPMCR disables FB_TA. + * + * Values: + * - 0 - Disabled. No internal transfer acknowledge is asserted and the cycle is + * terminated externally. + * - 1 - Enabled. Internal transfer acknowledge is asserted as specified by WS. + */ +/*@{*/ +#define BP_FB_CSCRn_AA (8U) /*!< Bit position for FB_CSCRn_AA. */ +#define BM_FB_CSCRn_AA (0x00000100U) /*!< Bit mask for FB_CSCRn_AA. */ +#define BS_FB_CSCRn_AA (1U) /*!< Bit field size in bits for FB_CSCRn_AA. */ + +/*! @brief Read current value of the FB_CSCRn_AA field. */ +#define BR_FB_CSCRn_AA(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_AA)) + +/*! @brief Format value for bitfield FB_CSCRn_AA. */ +#define BF_FB_CSCRn_AA(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_AA) & BM_FB_CSCRn_AA) + +/*! @brief Set the AA field to a new value. */ +#define BW_FB_CSCRn_AA(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_AA) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field BLS[9] (RW) + * + * Specifies if data on FB_AD appears left-aligned or right-aligned during the + * data phase of a FlexBus access. + * + * Values: + * - 0 - Not shifted. Data is left-aligned on FB_AD. + * - 1 - Shifted. Data is right-aligned on FB_AD. + */ +/*@{*/ +#define BP_FB_CSCRn_BLS (9U) /*!< Bit position for FB_CSCRn_BLS. */ +#define BM_FB_CSCRn_BLS (0x00000200U) /*!< Bit mask for FB_CSCRn_BLS. */ +#define BS_FB_CSCRn_BLS (1U) /*!< Bit field size in bits for FB_CSCRn_BLS. */ + +/*! @brief Read current value of the FB_CSCRn_BLS field. */ +#define BR_FB_CSCRn_BLS(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BLS)) + +/*! @brief Format value for bitfield FB_CSCRn_BLS. */ +#define BF_FB_CSCRn_BLS(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_BLS) & BM_FB_CSCRn_BLS) + +/*! @brief Set the BLS field to a new value. */ +#define BW_FB_CSCRn_BLS(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_BLS) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field WS[15:10] (RW) + * + * Specifies the number of wait states inserted after FlexBus asserts the + * associated chip-select and before an internal transfer acknowledge is generated (WS + * = 00h inserts 0 wait states, ..., WS = 3Fh inserts 63 wait states). + */ +/*@{*/ +#define BP_FB_CSCRn_WS (10U) /*!< Bit position for FB_CSCRn_WS. */ +#define BM_FB_CSCRn_WS (0x0000FC00U) /*!< Bit mask for FB_CSCRn_WS. */ +#define BS_FB_CSCRn_WS (6U) /*!< Bit field size in bits for FB_CSCRn_WS. */ + +/*! @brief Read current value of the FB_CSCRn_WS field. */ +#define BR_FB_CSCRn_WS(x, n) (HW_FB_CSCRn(x, n).B.WS) + +/*! @brief Format value for bitfield FB_CSCRn_WS. */ +#define BF_FB_CSCRn_WS(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_WS) & BM_FB_CSCRn_WS) + +/*! @brief Set the WS field to a new value. */ +#define BW_FB_CSCRn_WS(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_WS) | BF_FB_CSCRn_WS(v))) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field WRAH[17:16] (RW) + * + * Controls the address, data, and attribute hold time after the termination of + * a write cycle that hits in the associated chip-select's address space. The + * hold time applies only at the end of a transfer. Therefore, during a burst + * transfer or a transfer to a port size smaller than the transfer size, the hold time + * is only added after the last bus cycle. + * + * Values: + * - 00 - 1 cycle (default for all but FB_CS0 ) + * - 01 - 2 cycles + * - 10 - 3 cycles + * - 11 - 4 cycles (default for FB_CS0 ) + */ +/*@{*/ +#define BP_FB_CSCRn_WRAH (16U) /*!< Bit position for FB_CSCRn_WRAH. */ +#define BM_FB_CSCRn_WRAH (0x00030000U) /*!< Bit mask for FB_CSCRn_WRAH. */ +#define BS_FB_CSCRn_WRAH (2U) /*!< Bit field size in bits for FB_CSCRn_WRAH. */ + +/*! @brief Read current value of the FB_CSCRn_WRAH field. */ +#define BR_FB_CSCRn_WRAH(x, n) (HW_FB_CSCRn(x, n).B.WRAH) + +/*! @brief Format value for bitfield FB_CSCRn_WRAH. */ +#define BF_FB_CSCRn_WRAH(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_WRAH) & BM_FB_CSCRn_WRAH) + +/*! @brief Set the WRAH field to a new value. */ +#define BW_FB_CSCRn_WRAH(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_WRAH) | BF_FB_CSCRn_WRAH(v))) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field RDAH[19:18] (RW) + * + * Controls the address and attribute hold time after the termination during a + * read cycle that hits in the associated chip-select's address space. The hold + * time applies only at the end of a transfer. Therefore, during a burst transfer + * or a transfer to a port size smaller than the transfer size, the hold time is + * only added after the last bus cycle. The number of cycles the address and + * attributes are held after FB_CSn deassertion depends on the value of the AA bit. + * + * Values: + * - 00 - When AA is 0b, 1 cycle. When AA is 1b, 0 cycles. + * - 01 - When AA is 0b, 2 cycles. When AA is 1b, 1 cycle. + * - 10 - When AA is 0b, 3 cycles. When AA is 1b, 2 cycles. + * - 11 - When AA is 0b, 4 cycles. When AA is 1b, 3 cycles. + */ +/*@{*/ +#define BP_FB_CSCRn_RDAH (18U) /*!< Bit position for FB_CSCRn_RDAH. */ +#define BM_FB_CSCRn_RDAH (0x000C0000U) /*!< Bit mask for FB_CSCRn_RDAH. */ +#define BS_FB_CSCRn_RDAH (2U) /*!< Bit field size in bits for FB_CSCRn_RDAH. */ + +/*! @brief Read current value of the FB_CSCRn_RDAH field. */ +#define BR_FB_CSCRn_RDAH(x, n) (HW_FB_CSCRn(x, n).B.RDAH) + +/*! @brief Format value for bitfield FB_CSCRn_RDAH. */ +#define BF_FB_CSCRn_RDAH(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_RDAH) & BM_FB_CSCRn_RDAH) + +/*! @brief Set the RDAH field to a new value. */ +#define BW_FB_CSCRn_RDAH(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_RDAH) | BF_FB_CSCRn_RDAH(v))) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field ASET[21:20] (RW) + * + * Controls when the chip-select is asserted with respect to assertion of a + * valid address and attributes. + * + * Values: + * - 00 - Assert FB_CSn on the first rising clock edge after the address is + * asserted (default for all but FB_CS0 ). + * - 01 - Assert FB_CSn on the second rising clock edge after the address is + * asserted. + * - 10 - Assert FB_CSn on the third rising clock edge after the address is + * asserted. + * - 11 - Assert FB_CSn on the fourth rising clock edge after the address is + * asserted (default for FB_CS0 ). + */ +/*@{*/ +#define BP_FB_CSCRn_ASET (20U) /*!< Bit position for FB_CSCRn_ASET. */ +#define BM_FB_CSCRn_ASET (0x00300000U) /*!< Bit mask for FB_CSCRn_ASET. */ +#define BS_FB_CSCRn_ASET (2U) /*!< Bit field size in bits for FB_CSCRn_ASET. */ + +/*! @brief Read current value of the FB_CSCRn_ASET field. */ +#define BR_FB_CSCRn_ASET(x, n) (HW_FB_CSCRn(x, n).B.ASET) + +/*! @brief Format value for bitfield FB_CSCRn_ASET. */ +#define BF_FB_CSCRn_ASET(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_ASET) & BM_FB_CSCRn_ASET) + +/*! @brief Set the ASET field to a new value. */ +#define BW_FB_CSCRn_ASET(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_ASET) | BF_FB_CSCRn_ASET(v))) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field EXTS[22] (RW) + * + * Extended Transfer Start/Extended Address Latch Enable Controls how long FB_TS + * /FB_ALE is asserted. + * + * Values: + * - 0 - Disabled. FB_TS /FB_ALE asserts for one bus clock cycle. + * - 1 - Enabled. FB_TS /FB_ALE remains asserted until the first positive clock + * edge after FB_CSn asserts. + */ +/*@{*/ +#define BP_FB_CSCRn_EXTS (22U) /*!< Bit position for FB_CSCRn_EXTS. */ +#define BM_FB_CSCRn_EXTS (0x00400000U) /*!< Bit mask for FB_CSCRn_EXTS. */ +#define BS_FB_CSCRn_EXTS (1U) /*!< Bit field size in bits for FB_CSCRn_EXTS. */ + +/*! @brief Read current value of the FB_CSCRn_EXTS field. */ +#define BR_FB_CSCRn_EXTS(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_EXTS)) + +/*! @brief Format value for bitfield FB_CSCRn_EXTS. */ +#define BF_FB_CSCRn_EXTS(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_EXTS) & BM_FB_CSCRn_EXTS) + +/*! @brief Set the EXTS field to a new value. */ +#define BW_FB_CSCRn_EXTS(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_EXTS) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field SWSEN[23] (RW) + * + * Values: + * - 0 - Disabled. A number of wait states (specified by WS) are inserted before + * an internal transfer acknowledge is generated for all transfers. + * - 1 - Enabled. A number of wait states (specified by SWS) are inserted before + * an internal transfer acknowledge is generated for burst transfer + * secondary terminations. + */ +/*@{*/ +#define BP_FB_CSCRn_SWSEN (23U) /*!< Bit position for FB_CSCRn_SWSEN. */ +#define BM_FB_CSCRn_SWSEN (0x00800000U) /*!< Bit mask for FB_CSCRn_SWSEN. */ +#define BS_FB_CSCRn_SWSEN (1U) /*!< Bit field size in bits for FB_CSCRn_SWSEN. */ + +/*! @brief Read current value of the FB_CSCRn_SWSEN field. */ +#define BR_FB_CSCRn_SWSEN(x, n) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_SWSEN)) + +/*! @brief Format value for bitfield FB_CSCRn_SWSEN. */ +#define BF_FB_CSCRn_SWSEN(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_SWSEN) & BM_FB_CSCRn_SWSEN) + +/*! @brief Set the SWSEN field to a new value. */ +#define BW_FB_CSCRn_SWSEN(x, n, v) (BITBAND_ACCESS32(HW_FB_CSCRn_ADDR(x, n), BP_FB_CSCRn_SWSEN) = (v)) +/*@}*/ + +/*! + * @name Register FB_CSCRn, field SWS[31:26] (RW) + * + * Used only when the SWSEN bit is 1b. Specifies the number of wait states + * inserted before an internal transfer acknowledge is generated for a burst transfer + * (except for the first termination, which is controlled by WS). + */ +/*@{*/ +#define BP_FB_CSCRn_SWS (26U) /*!< Bit position for FB_CSCRn_SWS. */ +#define BM_FB_CSCRn_SWS (0xFC000000U) /*!< Bit mask for FB_CSCRn_SWS. */ +#define BS_FB_CSCRn_SWS (6U) /*!< Bit field size in bits for FB_CSCRn_SWS. */ + +/*! @brief Read current value of the FB_CSCRn_SWS field. */ +#define BR_FB_CSCRn_SWS(x, n) (HW_FB_CSCRn(x, n).B.SWS) + +/*! @brief Format value for bitfield FB_CSCRn_SWS. */ +#define BF_FB_CSCRn_SWS(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSCRn_SWS) & BM_FB_CSCRn_SWS) + +/*! @brief Set the SWS field to a new value. */ +#define BW_FB_CSCRn_SWS(x, n, v) (HW_FB_CSCRn_WR(x, n, (HW_FB_CSCRn_RD(x, n) & ~BM_FB_CSCRn_SWS) | BF_FB_CSCRn_SWS(v))) +/*@}*/ + +/******************************************************************************* + * HW_FB_CSPMCR - Chip Select port Multiplexing Control Register + ******************************************************************************/ + +/*! + * @brief HW_FB_CSPMCR - Chip Select port Multiplexing Control Register (RW) + * + * Reset value: 0x00000000U + * + * Controls the multiplexing of the FlexBus signals. A bus error occurs when you + * do any of the following: Write to a reserved address Write to a reserved + * field in this register, or Access this register using a size other than 32 bits. + */ +typedef union _hw_fb_cspmcr +{ + uint32_t U; + struct _hw_fb_cspmcr_bitfields + { + uint32_t RESERVED0 : 12; /*!< [11:0] */ + uint32_t GROUP5 : 4; /*!< [15:12] FlexBus Signal Group 5 Multiplex + * control */ + uint32_t GROUP4 : 4; /*!< [19:16] FlexBus Signal Group 4 Multiplex + * control */ + uint32_t GROUP3 : 4; /*!< [23:20] FlexBus Signal Group 3 Multiplex + * control */ + uint32_t GROUP2 : 4; /*!< [27:24] FlexBus Signal Group 2 Multiplex + * control */ + uint32_t GROUP1 : 4; /*!< [31:28] FlexBus Signal Group 1 Multiplex + * control */ + } B; +} hw_fb_cspmcr_t; + +/*! + * @name Constants and macros for entire FB_CSPMCR register + */ +/*@{*/ +#define HW_FB_CSPMCR_ADDR(x) ((x) + 0x60U) + +#define HW_FB_CSPMCR(x) (*(__IO hw_fb_cspmcr_t *) HW_FB_CSPMCR_ADDR(x)) +#define HW_FB_CSPMCR_RD(x) (HW_FB_CSPMCR(x).U) +#define HW_FB_CSPMCR_WR(x, v) (HW_FB_CSPMCR(x).U = (v)) +#define HW_FB_CSPMCR_SET(x, v) (HW_FB_CSPMCR_WR(x, HW_FB_CSPMCR_RD(x) | (v))) +#define HW_FB_CSPMCR_CLR(x, v) (HW_FB_CSPMCR_WR(x, HW_FB_CSPMCR_RD(x) & ~(v))) +#define HW_FB_CSPMCR_TOG(x, v) (HW_FB_CSPMCR_WR(x, HW_FB_CSPMCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FB_CSPMCR bitfields + */ + +/*! + * @name Register FB_CSPMCR, field GROUP5[15:12] (RW) + * + * Controls the multiplexing of the FB_TA , FB_CS3 , and FB_BE_7_0 signals. When + * GROUP5 is not 0000b, you must write 1b to the CSCR[AA] bit. Otherwise, the + * bus hangs during a transfer. + * + * Values: + * - 0000 - FB_TA + * - 0001 - FB_CS3 . You must also write 1b to CSCR[AA]. + * - 0010 - FB_BE_7_0 . You must also write 1b to CSCR[AA]. + */ +/*@{*/ +#define BP_FB_CSPMCR_GROUP5 (12U) /*!< Bit position for FB_CSPMCR_GROUP5. */ +#define BM_FB_CSPMCR_GROUP5 (0x0000F000U) /*!< Bit mask for FB_CSPMCR_GROUP5. */ +#define BS_FB_CSPMCR_GROUP5 (4U) /*!< Bit field size in bits for FB_CSPMCR_GROUP5. */ + +/*! @brief Read current value of the FB_CSPMCR_GROUP5 field. */ +#define BR_FB_CSPMCR_GROUP5(x) (HW_FB_CSPMCR(x).B.GROUP5) + +/*! @brief Format value for bitfield FB_CSPMCR_GROUP5. */ +#define BF_FB_CSPMCR_GROUP5(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSPMCR_GROUP5) & BM_FB_CSPMCR_GROUP5) + +/*! @brief Set the GROUP5 field to a new value. */ +#define BW_FB_CSPMCR_GROUP5(x, v) (HW_FB_CSPMCR_WR(x, (HW_FB_CSPMCR_RD(x) & ~BM_FB_CSPMCR_GROUP5) | BF_FB_CSPMCR_GROUP5(v))) +/*@}*/ + +/*! + * @name Register FB_CSPMCR, field GROUP4[19:16] (RW) + * + * Controls the multiplexing of the FB_TBST , FB_CS2 , and FB_BE_15_8 signals. + * + * Values: + * - 0000 - FB_TBST + * - 0001 - FB_CS2 + * - 0010 - FB_BE_15_8 + */ +/*@{*/ +#define BP_FB_CSPMCR_GROUP4 (16U) /*!< Bit position for FB_CSPMCR_GROUP4. */ +#define BM_FB_CSPMCR_GROUP4 (0x000F0000U) /*!< Bit mask for FB_CSPMCR_GROUP4. */ +#define BS_FB_CSPMCR_GROUP4 (4U) /*!< Bit field size in bits for FB_CSPMCR_GROUP4. */ + +/*! @brief Read current value of the FB_CSPMCR_GROUP4 field. */ +#define BR_FB_CSPMCR_GROUP4(x) (HW_FB_CSPMCR(x).B.GROUP4) + +/*! @brief Format value for bitfield FB_CSPMCR_GROUP4. */ +#define BF_FB_CSPMCR_GROUP4(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSPMCR_GROUP4) & BM_FB_CSPMCR_GROUP4) + +/*! @brief Set the GROUP4 field to a new value. */ +#define BW_FB_CSPMCR_GROUP4(x, v) (HW_FB_CSPMCR_WR(x, (HW_FB_CSPMCR_RD(x) & ~BM_FB_CSPMCR_GROUP4) | BF_FB_CSPMCR_GROUP4(v))) +/*@}*/ + +/*! + * @name Register FB_CSPMCR, field GROUP3[23:20] (RW) + * + * Controls the multiplexing of the FB_CS5 , FB_TSIZ1, and FB_BE_23_16 signals. + * + * Values: + * - 0000 - FB_CS5 + * - 0001 - FB_TSIZ1 + * - 0010 - FB_BE_23_16 + */ +/*@{*/ +#define BP_FB_CSPMCR_GROUP3 (20U) /*!< Bit position for FB_CSPMCR_GROUP3. */ +#define BM_FB_CSPMCR_GROUP3 (0x00F00000U) /*!< Bit mask for FB_CSPMCR_GROUP3. */ +#define BS_FB_CSPMCR_GROUP3 (4U) /*!< Bit field size in bits for FB_CSPMCR_GROUP3. */ + +/*! @brief Read current value of the FB_CSPMCR_GROUP3 field. */ +#define BR_FB_CSPMCR_GROUP3(x) (HW_FB_CSPMCR(x).B.GROUP3) + +/*! @brief Format value for bitfield FB_CSPMCR_GROUP3. */ +#define BF_FB_CSPMCR_GROUP3(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSPMCR_GROUP3) & BM_FB_CSPMCR_GROUP3) + +/*! @brief Set the GROUP3 field to a new value. */ +#define BW_FB_CSPMCR_GROUP3(x, v) (HW_FB_CSPMCR_WR(x, (HW_FB_CSPMCR_RD(x) & ~BM_FB_CSPMCR_GROUP3) | BF_FB_CSPMCR_GROUP3(v))) +/*@}*/ + +/*! + * @name Register FB_CSPMCR, field GROUP2[27:24] (RW) + * + * Controls the multiplexing of the FB_CS4 , FB_TSIZ0, and FB_BE_31_24 signals. + * + * Values: + * - 0000 - FB_CS4 + * - 0001 - FB_TSIZ0 + * - 0010 - FB_BE_31_24 + */ +/*@{*/ +#define BP_FB_CSPMCR_GROUP2 (24U) /*!< Bit position for FB_CSPMCR_GROUP2. */ +#define BM_FB_CSPMCR_GROUP2 (0x0F000000U) /*!< Bit mask for FB_CSPMCR_GROUP2. */ +#define BS_FB_CSPMCR_GROUP2 (4U) /*!< Bit field size in bits for FB_CSPMCR_GROUP2. */ + +/*! @brief Read current value of the FB_CSPMCR_GROUP2 field. */ +#define BR_FB_CSPMCR_GROUP2(x) (HW_FB_CSPMCR(x).B.GROUP2) + +/*! @brief Format value for bitfield FB_CSPMCR_GROUP2. */ +#define BF_FB_CSPMCR_GROUP2(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSPMCR_GROUP2) & BM_FB_CSPMCR_GROUP2) + +/*! @brief Set the GROUP2 field to a new value. */ +#define BW_FB_CSPMCR_GROUP2(x, v) (HW_FB_CSPMCR_WR(x, (HW_FB_CSPMCR_RD(x) & ~BM_FB_CSPMCR_GROUP2) | BF_FB_CSPMCR_GROUP2(v))) +/*@}*/ + +/*! + * @name Register FB_CSPMCR, field GROUP1[31:28] (RW) + * + * Controls the multiplexing of the FB_ALE, FB_CS1 , and FB_TS signals. + * + * Values: + * - 0000 - FB_ALE + * - 0001 - FB_CS1 + * - 0010 - FB_TS + */ +/*@{*/ +#define BP_FB_CSPMCR_GROUP1 (28U) /*!< Bit position for FB_CSPMCR_GROUP1. */ +#define BM_FB_CSPMCR_GROUP1 (0xF0000000U) /*!< Bit mask for FB_CSPMCR_GROUP1. */ +#define BS_FB_CSPMCR_GROUP1 (4U) /*!< Bit field size in bits for FB_CSPMCR_GROUP1. */ + +/*! @brief Read current value of the FB_CSPMCR_GROUP1 field. */ +#define BR_FB_CSPMCR_GROUP1(x) (HW_FB_CSPMCR(x).B.GROUP1) + +/*! @brief Format value for bitfield FB_CSPMCR_GROUP1. */ +#define BF_FB_CSPMCR_GROUP1(v) ((uint32_t)((uint32_t)(v) << BP_FB_CSPMCR_GROUP1) & BM_FB_CSPMCR_GROUP1) + +/*! @brief Set the GROUP1 field to a new value. */ +#define BW_FB_CSPMCR_GROUP1(x, v) (HW_FB_CSPMCR_WR(x, (HW_FB_CSPMCR_RD(x) & ~BM_FB_CSPMCR_GROUP1) | BF_FB_CSPMCR_GROUP1(v))) +/*@}*/ + +/******************************************************************************* + * hw_fb_t - module struct + ******************************************************************************/ +/*! + * @brief All FB module registers. + */ +#pragma pack(1) +typedef struct _hw_fb +{ + struct { + __IO hw_fb_csarn_t CSARn; /*!< [0x0] Chip Select Address Register */ + __IO hw_fb_csmrn_t CSMRn; /*!< [0x4] Chip Select Mask Register */ + __IO hw_fb_cscrn_t CSCRn; /*!< [0x8] Chip Select Control Register */ + } CS[6]; + uint8_t _reserved0[24]; + __IO hw_fb_cspmcr_t CSPMCR; /*!< [0x60] Chip Select port Multiplexing Control Register */ +} hw_fb_t; +#pragma pack() + +/*! @brief Macro to access all FB registers. */ +/*! @param x FB module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_FB(FB_BASE)</code>. */ +#define HW_FB(x) (*(hw_fb_t *)(x)) + +#endif /* __HW_FB_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fmc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fmc.h new file mode 100644 index 0000000000..b18bbf2be4 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_fmc.h @@ -0,0 +1,1979 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_FMC_REGISTERS_H__ +#define __HW_FMC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 FMC + * + * Flash Memory Controller + * + * Registers defined in this header file: + * - HW_FMC_PFAPR - Flash Access Protection Register + * - HW_FMC_PFB0CR - Flash Bank 0 Control Register + * - HW_FMC_PFB1CR - Flash Bank 1 Control Register + * - HW_FMC_TAGVDW0Sn - Cache Tag Storage + * - HW_FMC_TAGVDW1Sn - Cache Tag Storage + * - HW_FMC_TAGVDW2Sn - Cache Tag Storage + * - HW_FMC_TAGVDW3Sn - Cache Tag Storage + * - HW_FMC_DATAW0SnU - Cache Data Storage (upper word) + * - HW_FMC_DATAW0SnL - Cache Data Storage (lower word) + * - HW_FMC_DATAW1SnU - Cache Data Storage (upper word) + * - HW_FMC_DATAW1SnL - Cache Data Storage (lower word) + * - HW_FMC_DATAW2SnU - Cache Data Storage (upper word) + * - HW_FMC_DATAW2SnL - Cache Data Storage (lower word) + * - HW_FMC_DATAW3SnU - Cache Data Storage (upper word) + * - HW_FMC_DATAW3SnL - Cache Data Storage (lower word) + * + * - hw_fmc_t - Struct containing all module registers. + */ + +#define HW_FMC_INSTANCE_COUNT (1U) /*!< Number of instances of the FMC module. */ + +/******************************************************************************* + * HW_FMC_PFAPR - Flash Access Protection Register + ******************************************************************************/ + +/*! + * @brief HW_FMC_PFAPR - Flash Access Protection Register (RW) + * + * Reset value: 0x00F8003FU + */ +typedef union _hw_fmc_pfapr +{ + uint32_t U; + struct _hw_fmc_pfapr_bitfields + { + uint32_t M0AP : 2; /*!< [1:0] Master 0 Access Protection */ + uint32_t M1AP : 2; /*!< [3:2] Master 1 Access Protection */ + uint32_t M2AP : 2; /*!< [5:4] Master 2 Access Protection */ + uint32_t M3AP : 2; /*!< [7:6] Master 3 Access Protection */ + uint32_t M4AP : 2; /*!< [9:8] Master 4 Access Protection */ + uint32_t M5AP : 2; /*!< [11:10] Master 5 Access Protection */ + uint32_t M6AP : 2; /*!< [13:12] Master 6 Access Protection */ + uint32_t M7AP : 2; /*!< [15:14] Master 7 Access Protection */ + uint32_t M0PFD : 1; /*!< [16] Master 0 Prefetch Disable */ + uint32_t M1PFD : 1; /*!< [17] Master 1 Prefetch Disable */ + uint32_t M2PFD : 1; /*!< [18] Master 2 Prefetch Disable */ + uint32_t M3PFD : 1; /*!< [19] Master 3 Prefetch Disable */ + uint32_t M4PFD : 1; /*!< [20] Master 4 Prefetch Disable */ + uint32_t M5PFD : 1; /*!< [21] Master 5 Prefetch Disable */ + uint32_t M6PFD : 1; /*!< [22] Master 6 Prefetch Disable */ + uint32_t M7PFD : 1; /*!< [23] Master 7 Prefetch Disable */ + uint32_t RESERVED0 : 8; /*!< [31:24] */ + } B; +} hw_fmc_pfapr_t; + +/*! + * @name Constants and macros for entire FMC_PFAPR register + */ +/*@{*/ +#define HW_FMC_PFAPR_ADDR(x) ((x) + 0x0U) + +#define HW_FMC_PFAPR(x) (*(__IO hw_fmc_pfapr_t *) HW_FMC_PFAPR_ADDR(x)) +#define HW_FMC_PFAPR_RD(x) (HW_FMC_PFAPR(x).U) +#define HW_FMC_PFAPR_WR(x, v) (HW_FMC_PFAPR(x).U = (v)) +#define HW_FMC_PFAPR_SET(x, v) (HW_FMC_PFAPR_WR(x, HW_FMC_PFAPR_RD(x) | (v))) +#define HW_FMC_PFAPR_CLR(x, v) (HW_FMC_PFAPR_WR(x, HW_FMC_PFAPR_RD(x) & ~(v))) +#define HW_FMC_PFAPR_TOG(x, v) (HW_FMC_PFAPR_WR(x, HW_FMC_PFAPR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_PFAPR bitfields + */ + +/*! + * @name Register FMC_PFAPR, field M0AP[1:0] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M0AP (0U) /*!< Bit position for FMC_PFAPR_M0AP. */ +#define BM_FMC_PFAPR_M0AP (0x00000003U) /*!< Bit mask for FMC_PFAPR_M0AP. */ +#define BS_FMC_PFAPR_M0AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M0AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M0AP field. */ +#define BR_FMC_PFAPR_M0AP(x) (HW_FMC_PFAPR(x).B.M0AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M0AP. */ +#define BF_FMC_PFAPR_M0AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M0AP) & BM_FMC_PFAPR_M0AP) + +/*! @brief Set the M0AP field to a new value. */ +#define BW_FMC_PFAPR_M0AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M0AP) | BF_FMC_PFAPR_M0AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M1AP[3:2] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M1AP (2U) /*!< Bit position for FMC_PFAPR_M1AP. */ +#define BM_FMC_PFAPR_M1AP (0x0000000CU) /*!< Bit mask for FMC_PFAPR_M1AP. */ +#define BS_FMC_PFAPR_M1AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M1AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M1AP field. */ +#define BR_FMC_PFAPR_M1AP(x) (HW_FMC_PFAPR(x).B.M1AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M1AP. */ +#define BF_FMC_PFAPR_M1AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M1AP) & BM_FMC_PFAPR_M1AP) + +/*! @brief Set the M1AP field to a new value. */ +#define BW_FMC_PFAPR_M1AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M1AP) | BF_FMC_PFAPR_M1AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M2AP[5:4] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M2AP (4U) /*!< Bit position for FMC_PFAPR_M2AP. */ +#define BM_FMC_PFAPR_M2AP (0x00000030U) /*!< Bit mask for FMC_PFAPR_M2AP. */ +#define BS_FMC_PFAPR_M2AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M2AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M2AP field. */ +#define BR_FMC_PFAPR_M2AP(x) (HW_FMC_PFAPR(x).B.M2AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M2AP. */ +#define BF_FMC_PFAPR_M2AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M2AP) & BM_FMC_PFAPR_M2AP) + +/*! @brief Set the M2AP field to a new value. */ +#define BW_FMC_PFAPR_M2AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M2AP) | BF_FMC_PFAPR_M2AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M3AP[7:6] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M3AP (6U) /*!< Bit position for FMC_PFAPR_M3AP. */ +#define BM_FMC_PFAPR_M3AP (0x000000C0U) /*!< Bit mask for FMC_PFAPR_M3AP. */ +#define BS_FMC_PFAPR_M3AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M3AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M3AP field. */ +#define BR_FMC_PFAPR_M3AP(x) (HW_FMC_PFAPR(x).B.M3AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M3AP. */ +#define BF_FMC_PFAPR_M3AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M3AP) & BM_FMC_PFAPR_M3AP) + +/*! @brief Set the M3AP field to a new value. */ +#define BW_FMC_PFAPR_M3AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M3AP) | BF_FMC_PFAPR_M3AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M4AP[9:8] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M4AP (8U) /*!< Bit position for FMC_PFAPR_M4AP. */ +#define BM_FMC_PFAPR_M4AP (0x00000300U) /*!< Bit mask for FMC_PFAPR_M4AP. */ +#define BS_FMC_PFAPR_M4AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M4AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M4AP field. */ +#define BR_FMC_PFAPR_M4AP(x) (HW_FMC_PFAPR(x).B.M4AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M4AP. */ +#define BF_FMC_PFAPR_M4AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M4AP) & BM_FMC_PFAPR_M4AP) + +/*! @brief Set the M4AP field to a new value. */ +#define BW_FMC_PFAPR_M4AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M4AP) | BF_FMC_PFAPR_M4AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M5AP[11:10] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M5AP (10U) /*!< Bit position for FMC_PFAPR_M5AP. */ +#define BM_FMC_PFAPR_M5AP (0x00000C00U) /*!< Bit mask for FMC_PFAPR_M5AP. */ +#define BS_FMC_PFAPR_M5AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M5AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M5AP field. */ +#define BR_FMC_PFAPR_M5AP(x) (HW_FMC_PFAPR(x).B.M5AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M5AP. */ +#define BF_FMC_PFAPR_M5AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M5AP) & BM_FMC_PFAPR_M5AP) + +/*! @brief Set the M5AP field to a new value. */ +#define BW_FMC_PFAPR_M5AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M5AP) | BF_FMC_PFAPR_M5AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M6AP[13:12] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master + * - 01 - Only read accesses may be performed by this master + * - 10 - Only write accesses may be performed by this master + * - 11 - Both read and write accesses may be performed by this master + */ +/*@{*/ +#define BP_FMC_PFAPR_M6AP (12U) /*!< Bit position for FMC_PFAPR_M6AP. */ +#define BM_FMC_PFAPR_M6AP (0x00003000U) /*!< Bit mask for FMC_PFAPR_M6AP. */ +#define BS_FMC_PFAPR_M6AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M6AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M6AP field. */ +#define BR_FMC_PFAPR_M6AP(x) (HW_FMC_PFAPR(x).B.M6AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M6AP. */ +#define BF_FMC_PFAPR_M6AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M6AP) & BM_FMC_PFAPR_M6AP) + +/*! @brief Set the M6AP field to a new value. */ +#define BW_FMC_PFAPR_M6AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M6AP) | BF_FMC_PFAPR_M6AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M7AP[15:14] (RW) + * + * This field controls whether read and write access to the flash are allowed + * based on the logical master number of the requesting crossbar switch master. + * + * Values: + * - 00 - No access may be performed by this master. + * - 01 - Only read accesses may be performed by this master. + * - 10 - Only write accesses may be performed by this master. + * - 11 - Both read and write accesses may be performed by this master. + */ +/*@{*/ +#define BP_FMC_PFAPR_M7AP (14U) /*!< Bit position for FMC_PFAPR_M7AP. */ +#define BM_FMC_PFAPR_M7AP (0x0000C000U) /*!< Bit mask for FMC_PFAPR_M7AP. */ +#define BS_FMC_PFAPR_M7AP (2U) /*!< Bit field size in bits for FMC_PFAPR_M7AP. */ + +/*! @brief Read current value of the FMC_PFAPR_M7AP field. */ +#define BR_FMC_PFAPR_M7AP(x) (HW_FMC_PFAPR(x).B.M7AP) + +/*! @brief Format value for bitfield FMC_PFAPR_M7AP. */ +#define BF_FMC_PFAPR_M7AP(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M7AP) & BM_FMC_PFAPR_M7AP) + +/*! @brief Set the M7AP field to a new value. */ +#define BW_FMC_PFAPR_M7AP(x, v) (HW_FMC_PFAPR_WR(x, (HW_FMC_PFAPR_RD(x) & ~BM_FMC_PFAPR_M7AP) | BF_FMC_PFAPR_M7AP(v))) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M0PFD[16] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M0PFD (16U) /*!< Bit position for FMC_PFAPR_M0PFD. */ +#define BM_FMC_PFAPR_M0PFD (0x00010000U) /*!< Bit mask for FMC_PFAPR_M0PFD. */ +#define BS_FMC_PFAPR_M0PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M0PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M0PFD field. */ +#define BR_FMC_PFAPR_M0PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M0PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M0PFD. */ +#define BF_FMC_PFAPR_M0PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M0PFD) & BM_FMC_PFAPR_M0PFD) + +/*! @brief Set the M0PFD field to a new value. */ +#define BW_FMC_PFAPR_M0PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M0PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M1PFD[17] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M1PFD (17U) /*!< Bit position for FMC_PFAPR_M1PFD. */ +#define BM_FMC_PFAPR_M1PFD (0x00020000U) /*!< Bit mask for FMC_PFAPR_M1PFD. */ +#define BS_FMC_PFAPR_M1PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M1PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M1PFD field. */ +#define BR_FMC_PFAPR_M1PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M1PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M1PFD. */ +#define BF_FMC_PFAPR_M1PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M1PFD) & BM_FMC_PFAPR_M1PFD) + +/*! @brief Set the M1PFD field to a new value. */ +#define BW_FMC_PFAPR_M1PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M1PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M2PFD[18] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M2PFD (18U) /*!< Bit position for FMC_PFAPR_M2PFD. */ +#define BM_FMC_PFAPR_M2PFD (0x00040000U) /*!< Bit mask for FMC_PFAPR_M2PFD. */ +#define BS_FMC_PFAPR_M2PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M2PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M2PFD field. */ +#define BR_FMC_PFAPR_M2PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M2PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M2PFD. */ +#define BF_FMC_PFAPR_M2PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M2PFD) & BM_FMC_PFAPR_M2PFD) + +/*! @brief Set the M2PFD field to a new value. */ +#define BW_FMC_PFAPR_M2PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M2PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M3PFD[19] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M3PFD (19U) /*!< Bit position for FMC_PFAPR_M3PFD. */ +#define BM_FMC_PFAPR_M3PFD (0x00080000U) /*!< Bit mask for FMC_PFAPR_M3PFD. */ +#define BS_FMC_PFAPR_M3PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M3PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M3PFD field. */ +#define BR_FMC_PFAPR_M3PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M3PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M3PFD. */ +#define BF_FMC_PFAPR_M3PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M3PFD) & BM_FMC_PFAPR_M3PFD) + +/*! @brief Set the M3PFD field to a new value. */ +#define BW_FMC_PFAPR_M3PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M3PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M4PFD[20] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M4PFD (20U) /*!< Bit position for FMC_PFAPR_M4PFD. */ +#define BM_FMC_PFAPR_M4PFD (0x00100000U) /*!< Bit mask for FMC_PFAPR_M4PFD. */ +#define BS_FMC_PFAPR_M4PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M4PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M4PFD field. */ +#define BR_FMC_PFAPR_M4PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M4PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M4PFD. */ +#define BF_FMC_PFAPR_M4PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M4PFD) & BM_FMC_PFAPR_M4PFD) + +/*! @brief Set the M4PFD field to a new value. */ +#define BW_FMC_PFAPR_M4PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M4PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M5PFD[21] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M5PFD (21U) /*!< Bit position for FMC_PFAPR_M5PFD. */ +#define BM_FMC_PFAPR_M5PFD (0x00200000U) /*!< Bit mask for FMC_PFAPR_M5PFD. */ +#define BS_FMC_PFAPR_M5PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M5PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M5PFD field. */ +#define BR_FMC_PFAPR_M5PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M5PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M5PFD. */ +#define BF_FMC_PFAPR_M5PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M5PFD) & BM_FMC_PFAPR_M5PFD) + +/*! @brief Set the M5PFD field to a new value. */ +#define BW_FMC_PFAPR_M5PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M5PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M6PFD[22] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M6PFD (22U) /*!< Bit position for FMC_PFAPR_M6PFD. */ +#define BM_FMC_PFAPR_M6PFD (0x00400000U) /*!< Bit mask for FMC_PFAPR_M6PFD. */ +#define BS_FMC_PFAPR_M6PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M6PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M6PFD field. */ +#define BR_FMC_PFAPR_M6PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M6PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M6PFD. */ +#define BF_FMC_PFAPR_M6PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M6PFD) & BM_FMC_PFAPR_M6PFD) + +/*! @brief Set the M6PFD field to a new value. */ +#define BW_FMC_PFAPR_M6PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M6PFD) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFAPR, field M7PFD[23] (RW) + * + * These bits control whether prefetching is enabled based on the logical number + * of the requesting crossbar switch master. This field is further qualified by + * the PFBnCR[BxDPE,BxIPE] bits. + * + * Values: + * - 0 - Prefetching for this master is enabled. + * - 1 - Prefetching for this master is disabled. + */ +/*@{*/ +#define BP_FMC_PFAPR_M7PFD (23U) /*!< Bit position for FMC_PFAPR_M7PFD. */ +#define BM_FMC_PFAPR_M7PFD (0x00800000U) /*!< Bit mask for FMC_PFAPR_M7PFD. */ +#define BS_FMC_PFAPR_M7PFD (1U) /*!< Bit field size in bits for FMC_PFAPR_M7PFD. */ + +/*! @brief Read current value of the FMC_PFAPR_M7PFD field. */ +#define BR_FMC_PFAPR_M7PFD(x) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M7PFD)) + +/*! @brief Format value for bitfield FMC_PFAPR_M7PFD. */ +#define BF_FMC_PFAPR_M7PFD(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFAPR_M7PFD) & BM_FMC_PFAPR_M7PFD) + +/*! @brief Set the M7PFD field to a new value. */ +#define BW_FMC_PFAPR_M7PFD(x, v) (BITBAND_ACCESS32(HW_FMC_PFAPR_ADDR(x), BP_FMC_PFAPR_M7PFD) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FMC_PFB0CR - Flash Bank 0 Control Register + ******************************************************************************/ + +/*! + * @brief HW_FMC_PFB0CR - Flash Bank 0 Control Register (RW) + * + * Reset value: 0x3002001FU + */ +typedef union _hw_fmc_pfb0cr +{ + uint32_t U; + struct _hw_fmc_pfb0cr_bitfields + { + uint32_t B0SEBE : 1; /*!< [0] Bank 0 Single Entry Buffer Enable */ + uint32_t B0IPE : 1; /*!< [1] Bank 0 Instruction Prefetch Enable */ + uint32_t B0DPE : 1; /*!< [2] Bank 0 Data Prefetch Enable */ + uint32_t B0ICE : 1; /*!< [3] Bank 0 Instruction Cache Enable */ + uint32_t B0DCE : 1; /*!< [4] Bank 0 Data Cache Enable */ + uint32_t CRC : 3; /*!< [7:5] Cache Replacement Control */ + uint32_t RESERVED0 : 9; /*!< [16:8] */ + uint32_t B0MW : 2; /*!< [18:17] Bank 0 Memory Width */ + uint32_t S_B_INV : 1; /*!< [19] Invalidate Prefetch Speculation + * Buffer */ + uint32_t CINV_WAY : 4; /*!< [23:20] Cache Invalidate Way x */ + uint32_t CLCK_WAY : 4; /*!< [27:24] Cache Lock Way x */ + uint32_t B0RWSC : 4; /*!< [31:28] Bank 0 Read Wait State Control */ + } B; +} hw_fmc_pfb0cr_t; + +/*! + * @name Constants and macros for entire FMC_PFB0CR register + */ +/*@{*/ +#define HW_FMC_PFB0CR_ADDR(x) ((x) + 0x4U) + +#define HW_FMC_PFB0CR(x) (*(__IO hw_fmc_pfb0cr_t *) HW_FMC_PFB0CR_ADDR(x)) +#define HW_FMC_PFB0CR_RD(x) (HW_FMC_PFB0CR(x).U) +#define HW_FMC_PFB0CR_WR(x, v) (HW_FMC_PFB0CR(x).U = (v)) +#define HW_FMC_PFB0CR_SET(x, v) (HW_FMC_PFB0CR_WR(x, HW_FMC_PFB0CR_RD(x) | (v))) +#define HW_FMC_PFB0CR_CLR(x, v) (HW_FMC_PFB0CR_WR(x, HW_FMC_PFB0CR_RD(x) & ~(v))) +#define HW_FMC_PFB0CR_TOG(x, v) (HW_FMC_PFB0CR_WR(x, HW_FMC_PFB0CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_PFB0CR bitfields + */ + +/*! + * @name Register FMC_PFB0CR, field B0SEBE[0] (RW) + * + * This bit controls whether the single entry page buffer is enabled in response + * to flash read accesses. Its operation is independent from bank 1's cache. A + * high-to-low transition of this enable forces the page buffer to be invalidated. + * + * Values: + * - 0 - Single entry buffer is disabled. + * - 1 - Single entry buffer is enabled. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0SEBE (0U) /*!< Bit position for FMC_PFB0CR_B0SEBE. */ +#define BM_FMC_PFB0CR_B0SEBE (0x00000001U) /*!< Bit mask for FMC_PFB0CR_B0SEBE. */ +#define BS_FMC_PFB0CR_B0SEBE (1U) /*!< Bit field size in bits for FMC_PFB0CR_B0SEBE. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0SEBE field. */ +#define BR_FMC_PFB0CR_B0SEBE(x) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0SEBE)) + +/*! @brief Format value for bitfield FMC_PFB0CR_B0SEBE. */ +#define BF_FMC_PFB0CR_B0SEBE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_B0SEBE) & BM_FMC_PFB0CR_B0SEBE) + +/*! @brief Set the B0SEBE field to a new value. */ +#define BW_FMC_PFB0CR_B0SEBE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0SEBE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0IPE[1] (RW) + * + * This bit controls whether prefetches (or speculative accesses) are initiated + * in response to instruction fetches. + * + * Values: + * - 0 - Do not prefetch in response to instruction fetches. + * - 1 - Enable prefetches in response to instruction fetches. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0IPE (1U) /*!< Bit position for FMC_PFB0CR_B0IPE. */ +#define BM_FMC_PFB0CR_B0IPE (0x00000002U) /*!< Bit mask for FMC_PFB0CR_B0IPE. */ +#define BS_FMC_PFB0CR_B0IPE (1U) /*!< Bit field size in bits for FMC_PFB0CR_B0IPE. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0IPE field. */ +#define BR_FMC_PFB0CR_B0IPE(x) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0IPE)) + +/*! @brief Format value for bitfield FMC_PFB0CR_B0IPE. */ +#define BF_FMC_PFB0CR_B0IPE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_B0IPE) & BM_FMC_PFB0CR_B0IPE) + +/*! @brief Set the B0IPE field to a new value. */ +#define BW_FMC_PFB0CR_B0IPE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0IPE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0DPE[2] (RW) + * + * This bit controls whether prefetches (or speculative accesses) are initiated + * in response to data references. + * + * Values: + * - 0 - Do not prefetch in response to data references. + * - 1 - Enable prefetches in response to data references. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0DPE (2U) /*!< Bit position for FMC_PFB0CR_B0DPE. */ +#define BM_FMC_PFB0CR_B0DPE (0x00000004U) /*!< Bit mask for FMC_PFB0CR_B0DPE. */ +#define BS_FMC_PFB0CR_B0DPE (1U) /*!< Bit field size in bits for FMC_PFB0CR_B0DPE. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0DPE field. */ +#define BR_FMC_PFB0CR_B0DPE(x) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0DPE)) + +/*! @brief Format value for bitfield FMC_PFB0CR_B0DPE. */ +#define BF_FMC_PFB0CR_B0DPE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_B0DPE) & BM_FMC_PFB0CR_B0DPE) + +/*! @brief Set the B0DPE field to a new value. */ +#define BW_FMC_PFB0CR_B0DPE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0DPE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0ICE[3] (RW) + * + * This bit controls whether instruction fetches are loaded into the cache. + * + * Values: + * - 0 - Do not cache instruction fetches. + * - 1 - Cache instruction fetches. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0ICE (3U) /*!< Bit position for FMC_PFB0CR_B0ICE. */ +#define BM_FMC_PFB0CR_B0ICE (0x00000008U) /*!< Bit mask for FMC_PFB0CR_B0ICE. */ +#define BS_FMC_PFB0CR_B0ICE (1U) /*!< Bit field size in bits for FMC_PFB0CR_B0ICE. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0ICE field. */ +#define BR_FMC_PFB0CR_B0ICE(x) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0ICE)) + +/*! @brief Format value for bitfield FMC_PFB0CR_B0ICE. */ +#define BF_FMC_PFB0CR_B0ICE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_B0ICE) & BM_FMC_PFB0CR_B0ICE) + +/*! @brief Set the B0ICE field to a new value. */ +#define BW_FMC_PFB0CR_B0ICE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0ICE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0DCE[4] (RW) + * + * This bit controls whether data references are loaded into the cache. + * + * Values: + * - 0 - Do not cache data references. + * - 1 - Cache data references. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0DCE (4U) /*!< Bit position for FMC_PFB0CR_B0DCE. */ +#define BM_FMC_PFB0CR_B0DCE (0x00000010U) /*!< Bit mask for FMC_PFB0CR_B0DCE. */ +#define BS_FMC_PFB0CR_B0DCE (1U) /*!< Bit field size in bits for FMC_PFB0CR_B0DCE. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0DCE field. */ +#define BR_FMC_PFB0CR_B0DCE(x) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0DCE)) + +/*! @brief Format value for bitfield FMC_PFB0CR_B0DCE. */ +#define BF_FMC_PFB0CR_B0DCE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_B0DCE) & BM_FMC_PFB0CR_B0DCE) + +/*! @brief Set the B0DCE field to a new value. */ +#define BW_FMC_PFB0CR_B0DCE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_B0DCE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field CRC[7:5] (RW) + * + * This 3-bit field defines the replacement algorithm for accesses that are + * cached. + * + * Values: + * - 000 - LRU replacement algorithm per set across all four ways + * - 001 - Reserved + * - 010 - Independent LRU with ways [0-1] for ifetches, [2-3] for data + * - 011 - Independent LRU with ways [0-2] for ifetches, [3] for data + * - 1xx - Reserved + */ +/*@{*/ +#define BP_FMC_PFB0CR_CRC (5U) /*!< Bit position for FMC_PFB0CR_CRC. */ +#define BM_FMC_PFB0CR_CRC (0x000000E0U) /*!< Bit mask for FMC_PFB0CR_CRC. */ +#define BS_FMC_PFB0CR_CRC (3U) /*!< Bit field size in bits for FMC_PFB0CR_CRC. */ + +/*! @brief Read current value of the FMC_PFB0CR_CRC field. */ +#define BR_FMC_PFB0CR_CRC(x) (HW_FMC_PFB0CR(x).B.CRC) + +/*! @brief Format value for bitfield FMC_PFB0CR_CRC. */ +#define BF_FMC_PFB0CR_CRC(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_CRC) & BM_FMC_PFB0CR_CRC) + +/*! @brief Set the CRC field to a new value. */ +#define BW_FMC_PFB0CR_CRC(x, v) (HW_FMC_PFB0CR_WR(x, (HW_FMC_PFB0CR_RD(x) & ~BM_FMC_PFB0CR_CRC) | BF_FMC_PFB0CR_CRC(v))) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0MW[18:17] (RO) + * + * This read-only field defines the width of the bank 0 memory. + * + * Values: + * - 00 - 32 bits + * - 01 - 64 bits + * - 10 - Reserved + * - 11 - Reserved + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0MW (17U) /*!< Bit position for FMC_PFB0CR_B0MW. */ +#define BM_FMC_PFB0CR_B0MW (0x00060000U) /*!< Bit mask for FMC_PFB0CR_B0MW. */ +#define BS_FMC_PFB0CR_B0MW (2U) /*!< Bit field size in bits for FMC_PFB0CR_B0MW. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0MW field. */ +#define BR_FMC_PFB0CR_B0MW(x) (HW_FMC_PFB0CR(x).B.B0MW) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field S_B_INV[19] (WORZ) + * + * This bit determines if the FMC's prefetch speculation buffer and the single + * entry page buffer are to be invalidated (cleared). When this bit is written, + * the speculation buffer and single entry buffer are immediately cleared. This bit + * always reads as zero. + * + * Values: + * - 0 - Speculation buffer and single entry buffer are not affected. + * - 1 - Invalidate (clear) speculation buffer and single entry buffer. + */ +/*@{*/ +#define BP_FMC_PFB0CR_S_B_INV (19U) /*!< Bit position for FMC_PFB0CR_S_B_INV. */ +#define BM_FMC_PFB0CR_S_B_INV (0x00080000U) /*!< Bit mask for FMC_PFB0CR_S_B_INV. */ +#define BS_FMC_PFB0CR_S_B_INV (1U) /*!< Bit field size in bits for FMC_PFB0CR_S_B_INV. */ + +/*! @brief Format value for bitfield FMC_PFB0CR_S_B_INV. */ +#define BF_FMC_PFB0CR_S_B_INV(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_S_B_INV) & BM_FMC_PFB0CR_S_B_INV) + +/*! @brief Set the S_B_INV field to a new value. */ +#define BW_FMC_PFB0CR_S_B_INV(x, v) (BITBAND_ACCESS32(HW_FMC_PFB0CR_ADDR(x), BP_FMC_PFB0CR_S_B_INV) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field CINV_WAY[23:20] (WORZ) + * + * These bits determine if the given cache way is to be invalidated (cleared). + * When a bit within this field is written, the corresponding cache way is + * immediately invalidated: the way's tag, data, and valid contents are cleared. This + * field always reads as zero. Cache invalidation takes precedence over locking. + * The cache is invalidated by system reset. System software is required to + * maintain memory coherency when any segment of the flash memory is programmed or + * erased. Accordingly, cache invalidations must occur after a programming or erase + * event is completed and before the new memory image is accessed. The bit setting + * definitions are for each bit in the field. + * + * Values: + * - 0 - No cache way invalidation for the corresponding cache + * - 1 - Invalidate cache way for the corresponding cache: clear the tag, data, + * and vld bits of ways selected + */ +/*@{*/ +#define BP_FMC_PFB0CR_CINV_WAY (20U) /*!< Bit position for FMC_PFB0CR_CINV_WAY. */ +#define BM_FMC_PFB0CR_CINV_WAY (0x00F00000U) /*!< Bit mask for FMC_PFB0CR_CINV_WAY. */ +#define BS_FMC_PFB0CR_CINV_WAY (4U) /*!< Bit field size in bits for FMC_PFB0CR_CINV_WAY. */ + +/*! @brief Format value for bitfield FMC_PFB0CR_CINV_WAY. */ +#define BF_FMC_PFB0CR_CINV_WAY(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_CINV_WAY) & BM_FMC_PFB0CR_CINV_WAY) + +/*! @brief Set the CINV_WAY field to a new value. */ +#define BW_FMC_PFB0CR_CINV_WAY(x, v) (HW_FMC_PFB0CR_WR(x, (HW_FMC_PFB0CR_RD(x) & ~BM_FMC_PFB0CR_CINV_WAY) | BF_FMC_PFB0CR_CINV_WAY(v))) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field CLCK_WAY[27:24] (RW) + * + * These bits determine if the given cache way is locked such that its contents + * will not be displaced by future misses. The bit setting definitions are for + * each bit in the field. + * + * Values: + * - 0 - Cache way is unlocked and may be displaced + * - 1 - Cache way is locked and its contents are not displaced + */ +/*@{*/ +#define BP_FMC_PFB0CR_CLCK_WAY (24U) /*!< Bit position for FMC_PFB0CR_CLCK_WAY. */ +#define BM_FMC_PFB0CR_CLCK_WAY (0x0F000000U) /*!< Bit mask for FMC_PFB0CR_CLCK_WAY. */ +#define BS_FMC_PFB0CR_CLCK_WAY (4U) /*!< Bit field size in bits for FMC_PFB0CR_CLCK_WAY. */ + +/*! @brief Read current value of the FMC_PFB0CR_CLCK_WAY field. */ +#define BR_FMC_PFB0CR_CLCK_WAY(x) (HW_FMC_PFB0CR(x).B.CLCK_WAY) + +/*! @brief Format value for bitfield FMC_PFB0CR_CLCK_WAY. */ +#define BF_FMC_PFB0CR_CLCK_WAY(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB0CR_CLCK_WAY) & BM_FMC_PFB0CR_CLCK_WAY) + +/*! @brief Set the CLCK_WAY field to a new value. */ +#define BW_FMC_PFB0CR_CLCK_WAY(x, v) (HW_FMC_PFB0CR_WR(x, (HW_FMC_PFB0CR_RD(x) & ~BM_FMC_PFB0CR_CLCK_WAY) | BF_FMC_PFB0CR_CLCK_WAY(v))) +/*@}*/ + +/*! + * @name Register FMC_PFB0CR, field B0RWSC[31:28] (RO) + * + * This read-only field defines the number of wait states required to access the + * bank 0 flash memory. The relationship between the read access time of the + * flash array (expressed in system clock cycles) and RWSC is defined as: Access + * time of flash array [system clocks] = RWSC + 1 The FMC automatically calculates + * this value based on the ratio of the system clock speed to the flash clock + * speed. For example, when this ratio is 4:1, the field's value is 3h. + */ +/*@{*/ +#define BP_FMC_PFB0CR_B0RWSC (28U) /*!< Bit position for FMC_PFB0CR_B0RWSC. */ +#define BM_FMC_PFB0CR_B0RWSC (0xF0000000U) /*!< Bit mask for FMC_PFB0CR_B0RWSC. */ +#define BS_FMC_PFB0CR_B0RWSC (4U) /*!< Bit field size in bits for FMC_PFB0CR_B0RWSC. */ + +/*! @brief Read current value of the FMC_PFB0CR_B0RWSC field. */ +#define BR_FMC_PFB0CR_B0RWSC(x) (HW_FMC_PFB0CR(x).B.B0RWSC) +/*@}*/ + +/******************************************************************************* + * HW_FMC_PFB1CR - Flash Bank 1 Control Register + ******************************************************************************/ + +/*! + * @brief HW_FMC_PFB1CR - Flash Bank 1 Control Register (RW) + * + * Reset value: 0x3002001FU + * + * This register has a format similar to that for PFB0CR, except it controls the + * operation of flash bank 1, and the "global" cache control fields are empty. + */ +typedef union _hw_fmc_pfb1cr +{ + uint32_t U; + struct _hw_fmc_pfb1cr_bitfields + { + uint32_t B1SEBE : 1; /*!< [0] Bank 1 Single Entry Buffer Enable */ + uint32_t B1IPE : 1; /*!< [1] Bank 1 Instruction Prefetch Enable */ + uint32_t B1DPE : 1; /*!< [2] Bank 1 Data Prefetch Enable */ + uint32_t B1ICE : 1; /*!< [3] Bank 1 Instruction Cache Enable */ + uint32_t B1DCE : 1; /*!< [4] Bank 1 Data Cache Enable */ + uint32_t RESERVED0 : 12; /*!< [16:5] */ + uint32_t B1MW : 2; /*!< [18:17] Bank 1 Memory Width */ + uint32_t RESERVED1 : 9; /*!< [27:19] */ + uint32_t B1RWSC : 4; /*!< [31:28] Bank 1 Read Wait State Control */ + } B; +} hw_fmc_pfb1cr_t; + +/*! + * @name Constants and macros for entire FMC_PFB1CR register + */ +/*@{*/ +#define HW_FMC_PFB1CR_ADDR(x) ((x) + 0x8U) + +#define HW_FMC_PFB1CR(x) (*(__IO hw_fmc_pfb1cr_t *) HW_FMC_PFB1CR_ADDR(x)) +#define HW_FMC_PFB1CR_RD(x) (HW_FMC_PFB1CR(x).U) +#define HW_FMC_PFB1CR_WR(x, v) (HW_FMC_PFB1CR(x).U = (v)) +#define HW_FMC_PFB1CR_SET(x, v) (HW_FMC_PFB1CR_WR(x, HW_FMC_PFB1CR_RD(x) | (v))) +#define HW_FMC_PFB1CR_CLR(x, v) (HW_FMC_PFB1CR_WR(x, HW_FMC_PFB1CR_RD(x) & ~(v))) +#define HW_FMC_PFB1CR_TOG(x, v) (HW_FMC_PFB1CR_WR(x, HW_FMC_PFB1CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_PFB1CR bitfields + */ + +/*! + * @name Register FMC_PFB1CR, field B1SEBE[0] (RW) + * + * This bit controls whether the single entry buffer is enabled in response to + * flash read accesses. Its operation is independent from bank 0's cache. A + * high-to-low transition of this enable forces the page buffer to be invalidated. + * + * Values: + * - 0 - Single entry buffer is disabled. + * - 1 - Single entry buffer is enabled. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1SEBE (0U) /*!< Bit position for FMC_PFB1CR_B1SEBE. */ +#define BM_FMC_PFB1CR_B1SEBE (0x00000001U) /*!< Bit mask for FMC_PFB1CR_B1SEBE. */ +#define BS_FMC_PFB1CR_B1SEBE (1U) /*!< Bit field size in bits for FMC_PFB1CR_B1SEBE. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1SEBE field. */ +#define BR_FMC_PFB1CR_B1SEBE(x) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1SEBE)) + +/*! @brief Format value for bitfield FMC_PFB1CR_B1SEBE. */ +#define BF_FMC_PFB1CR_B1SEBE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB1CR_B1SEBE) & BM_FMC_PFB1CR_B1SEBE) + +/*! @brief Set the B1SEBE field to a new value. */ +#define BW_FMC_PFB1CR_B1SEBE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1SEBE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1IPE[1] (RW) + * + * This bit controls whether prefetches (or speculative accesses) are initiated + * in response to instruction fetches. + * + * Values: + * - 0 - Do not prefetch in response to instruction fetches. + * - 1 - Enable prefetches in response to instruction fetches. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1IPE (1U) /*!< Bit position for FMC_PFB1CR_B1IPE. */ +#define BM_FMC_PFB1CR_B1IPE (0x00000002U) /*!< Bit mask for FMC_PFB1CR_B1IPE. */ +#define BS_FMC_PFB1CR_B1IPE (1U) /*!< Bit field size in bits for FMC_PFB1CR_B1IPE. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1IPE field. */ +#define BR_FMC_PFB1CR_B1IPE(x) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1IPE)) + +/*! @brief Format value for bitfield FMC_PFB1CR_B1IPE. */ +#define BF_FMC_PFB1CR_B1IPE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB1CR_B1IPE) & BM_FMC_PFB1CR_B1IPE) + +/*! @brief Set the B1IPE field to a new value. */ +#define BW_FMC_PFB1CR_B1IPE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1IPE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1DPE[2] (RW) + * + * This bit controls whether prefetches (or speculative accesses) are initiated + * in response to data references. + * + * Values: + * - 0 - Do not prefetch in response to data references. + * - 1 - Enable prefetches in response to data references. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1DPE (2U) /*!< Bit position for FMC_PFB1CR_B1DPE. */ +#define BM_FMC_PFB1CR_B1DPE (0x00000004U) /*!< Bit mask for FMC_PFB1CR_B1DPE. */ +#define BS_FMC_PFB1CR_B1DPE (1U) /*!< Bit field size in bits for FMC_PFB1CR_B1DPE. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1DPE field. */ +#define BR_FMC_PFB1CR_B1DPE(x) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1DPE)) + +/*! @brief Format value for bitfield FMC_PFB1CR_B1DPE. */ +#define BF_FMC_PFB1CR_B1DPE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB1CR_B1DPE) & BM_FMC_PFB1CR_B1DPE) + +/*! @brief Set the B1DPE field to a new value. */ +#define BW_FMC_PFB1CR_B1DPE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1DPE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1ICE[3] (RW) + * + * This bit controls whether instruction fetches are loaded into the cache. + * + * Values: + * - 0 - Do not cache instruction fetches. + * - 1 - Cache instruction fetches. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1ICE (3U) /*!< Bit position for FMC_PFB1CR_B1ICE. */ +#define BM_FMC_PFB1CR_B1ICE (0x00000008U) /*!< Bit mask for FMC_PFB1CR_B1ICE. */ +#define BS_FMC_PFB1CR_B1ICE (1U) /*!< Bit field size in bits for FMC_PFB1CR_B1ICE. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1ICE field. */ +#define BR_FMC_PFB1CR_B1ICE(x) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1ICE)) + +/*! @brief Format value for bitfield FMC_PFB1CR_B1ICE. */ +#define BF_FMC_PFB1CR_B1ICE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB1CR_B1ICE) & BM_FMC_PFB1CR_B1ICE) + +/*! @brief Set the B1ICE field to a new value. */ +#define BW_FMC_PFB1CR_B1ICE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1ICE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1DCE[4] (RW) + * + * This bit controls whether data references are loaded into the cache. + * + * Values: + * - 0 - Do not cache data references. + * - 1 - Cache data references. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1DCE (4U) /*!< Bit position for FMC_PFB1CR_B1DCE. */ +#define BM_FMC_PFB1CR_B1DCE (0x00000010U) /*!< Bit mask for FMC_PFB1CR_B1DCE. */ +#define BS_FMC_PFB1CR_B1DCE (1U) /*!< Bit field size in bits for FMC_PFB1CR_B1DCE. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1DCE field. */ +#define BR_FMC_PFB1CR_B1DCE(x) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1DCE)) + +/*! @brief Format value for bitfield FMC_PFB1CR_B1DCE. */ +#define BF_FMC_PFB1CR_B1DCE(v) ((uint32_t)((uint32_t)(v) << BP_FMC_PFB1CR_B1DCE) & BM_FMC_PFB1CR_B1DCE) + +/*! @brief Set the B1DCE field to a new value. */ +#define BW_FMC_PFB1CR_B1DCE(x, v) (BITBAND_ACCESS32(HW_FMC_PFB1CR_ADDR(x), BP_FMC_PFB1CR_B1DCE) = (v)) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1MW[18:17] (RO) + * + * This read-only field defines the width of the bank 1 memory. + * + * Values: + * - 00 - 32 bits + * - 01 - 64 bits + * - 10 - Reserved + * - 11 - Reserved + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1MW (17U) /*!< Bit position for FMC_PFB1CR_B1MW. */ +#define BM_FMC_PFB1CR_B1MW (0x00060000U) /*!< Bit mask for FMC_PFB1CR_B1MW. */ +#define BS_FMC_PFB1CR_B1MW (2U) /*!< Bit field size in bits for FMC_PFB1CR_B1MW. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1MW field. */ +#define BR_FMC_PFB1CR_B1MW(x) (HW_FMC_PFB1CR(x).B.B1MW) +/*@}*/ + +/*! + * @name Register FMC_PFB1CR, field B1RWSC[31:28] (RO) + * + * This read-only field defines the number of wait states required to access the + * bank 1 flash memory. The relationship between the read access time of the + * flash array (expressed in system clock cycles) and RWSC is defined as: Access + * time of flash array [system clocks] = RWSC + 1 The FMC automatically calculates + * this value based on the ratio of the system clock speed to the flash clock + * speed. For example, when this ratio is 4:1, the field's value is 3h. + */ +/*@{*/ +#define BP_FMC_PFB1CR_B1RWSC (28U) /*!< Bit position for FMC_PFB1CR_B1RWSC. */ +#define BM_FMC_PFB1CR_B1RWSC (0xF0000000U) /*!< Bit mask for FMC_PFB1CR_B1RWSC. */ +#define BS_FMC_PFB1CR_B1RWSC (4U) /*!< Bit field size in bits for FMC_PFB1CR_B1RWSC. */ + +/*! @brief Read current value of the FMC_PFB1CR_B1RWSC field. */ +#define BR_FMC_PFB1CR_B1RWSC(x) (HW_FMC_PFB1CR(x).B.B1RWSC) +/*@}*/ + +/******************************************************************************* + * HW_FMC_TAGVDW0Sn - Cache Tag Storage + ******************************************************************************/ + +/*! + * @brief HW_FMC_TAGVDW0Sn - Cache Tag Storage (RW) + * + * Reset value: 0x00000000U + * + * The cache is a 4-way, set-associative cache with 8 sets. The ways are + * numbered 0-3 and the sets are numbered 0-7. In TAGVDWxSy, x denotes the way, and y + * denotes the set. This section represents tag/vld information for all sets in the + * indicated way. + */ +typedef union _hw_fmc_tagvdw0sn +{ + uint32_t U; + struct _hw_fmc_tagvdw0sn_bitfields + { + uint32_t valid : 1; /*!< [0] 1-bit valid for cache entry */ + uint32_t RESERVED0 : 4; /*!< [4:1] */ + uint32_t tag : 14; /*!< [18:5] 14-bit tag for cache entry */ + uint32_t RESERVED1 : 13; /*!< [31:19] */ + } B; +} hw_fmc_tagvdw0sn_t; + +/*! + * @name Constants and macros for entire FMC_TAGVDW0Sn register + */ +/*@{*/ +#define HW_FMC_TAGVDW0Sn_COUNT (8U) + +#define HW_FMC_TAGVDW0Sn_ADDR(x, n) ((x) + 0x100U + (0x4U * (n))) + +#define HW_FMC_TAGVDW0Sn(x, n) (*(__IO hw_fmc_tagvdw0sn_t *) HW_FMC_TAGVDW0Sn_ADDR(x, n)) +#define HW_FMC_TAGVDW0Sn_RD(x, n) (HW_FMC_TAGVDW0Sn(x, n).U) +#define HW_FMC_TAGVDW0Sn_WR(x, n, v) (HW_FMC_TAGVDW0Sn(x, n).U = (v)) +#define HW_FMC_TAGVDW0Sn_SET(x, n, v) (HW_FMC_TAGVDW0Sn_WR(x, n, HW_FMC_TAGVDW0Sn_RD(x, n) | (v))) +#define HW_FMC_TAGVDW0Sn_CLR(x, n, v) (HW_FMC_TAGVDW0Sn_WR(x, n, HW_FMC_TAGVDW0Sn_RD(x, n) & ~(v))) +#define HW_FMC_TAGVDW0Sn_TOG(x, n, v) (HW_FMC_TAGVDW0Sn_WR(x, n, HW_FMC_TAGVDW0Sn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_TAGVDW0Sn bitfields + */ + +/*! + * @name Register FMC_TAGVDW0Sn, field valid[0] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW0Sn_valid (0U) /*!< Bit position for FMC_TAGVDW0Sn_valid. */ +#define BM_FMC_TAGVDW0Sn_valid (0x00000001U) /*!< Bit mask for FMC_TAGVDW0Sn_valid. */ +#define BS_FMC_TAGVDW0Sn_valid (1U) /*!< Bit field size in bits for FMC_TAGVDW0Sn_valid. */ + +/*! @brief Read current value of the FMC_TAGVDW0Sn_valid field. */ +#define BR_FMC_TAGVDW0Sn_valid(x, n) (BITBAND_ACCESS32(HW_FMC_TAGVDW0Sn_ADDR(x, n), BP_FMC_TAGVDW0Sn_valid)) + +/*! @brief Format value for bitfield FMC_TAGVDW0Sn_valid. */ +#define BF_FMC_TAGVDW0Sn_valid(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW0Sn_valid) & BM_FMC_TAGVDW0Sn_valid) + +/*! @brief Set the valid field to a new value. */ +#define BW_FMC_TAGVDW0Sn_valid(x, n, v) (BITBAND_ACCESS32(HW_FMC_TAGVDW0Sn_ADDR(x, n), BP_FMC_TAGVDW0Sn_valid) = (v)) +/*@}*/ + +/*! + * @name Register FMC_TAGVDW0Sn, field tag[18:5] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW0Sn_tag (5U) /*!< Bit position for FMC_TAGVDW0Sn_tag. */ +#define BM_FMC_TAGVDW0Sn_tag (0x0007FFE0U) /*!< Bit mask for FMC_TAGVDW0Sn_tag. */ +#define BS_FMC_TAGVDW0Sn_tag (14U) /*!< Bit field size in bits for FMC_TAGVDW0Sn_tag. */ + +/*! @brief Read current value of the FMC_TAGVDW0Sn_tag field. */ +#define BR_FMC_TAGVDW0Sn_tag(x, n) (HW_FMC_TAGVDW0Sn(x, n).B.tag) + +/*! @brief Format value for bitfield FMC_TAGVDW0Sn_tag. */ +#define BF_FMC_TAGVDW0Sn_tag(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW0Sn_tag) & BM_FMC_TAGVDW0Sn_tag) + +/*! @brief Set the tag field to a new value. */ +#define BW_FMC_TAGVDW0Sn_tag(x, n, v) (HW_FMC_TAGVDW0Sn_WR(x, n, (HW_FMC_TAGVDW0Sn_RD(x, n) & ~BM_FMC_TAGVDW0Sn_tag) | BF_FMC_TAGVDW0Sn_tag(v))) +/*@}*/ + +/******************************************************************************* + * HW_FMC_TAGVDW1Sn - Cache Tag Storage + ******************************************************************************/ + +/*! + * @brief HW_FMC_TAGVDW1Sn - Cache Tag Storage (RW) + * + * Reset value: 0x00000000U + * + * The cache is a 4-way, set-associative cache with 8 sets. The ways are + * numbered 0-3 and the sets are numbered 0-7. In TAGVDWxSy, x denotes the way, and y + * denotes the set. This section represents tag/vld information for all sets in the + * indicated way. + */ +typedef union _hw_fmc_tagvdw1sn +{ + uint32_t U; + struct _hw_fmc_tagvdw1sn_bitfields + { + uint32_t valid : 1; /*!< [0] 1-bit valid for cache entry */ + uint32_t RESERVED0 : 4; /*!< [4:1] */ + uint32_t tag : 14; /*!< [18:5] 14-bit tag for cache entry */ + uint32_t RESERVED1 : 13; /*!< [31:19] */ + } B; +} hw_fmc_tagvdw1sn_t; + +/*! + * @name Constants and macros for entire FMC_TAGVDW1Sn register + */ +/*@{*/ +#define HW_FMC_TAGVDW1Sn_COUNT (8U) + +#define HW_FMC_TAGVDW1Sn_ADDR(x, n) ((x) + 0x120U + (0x4U * (n))) + +#define HW_FMC_TAGVDW1Sn(x, n) (*(__IO hw_fmc_tagvdw1sn_t *) HW_FMC_TAGVDW1Sn_ADDR(x, n)) +#define HW_FMC_TAGVDW1Sn_RD(x, n) (HW_FMC_TAGVDW1Sn(x, n).U) +#define HW_FMC_TAGVDW1Sn_WR(x, n, v) (HW_FMC_TAGVDW1Sn(x, n).U = (v)) +#define HW_FMC_TAGVDW1Sn_SET(x, n, v) (HW_FMC_TAGVDW1Sn_WR(x, n, HW_FMC_TAGVDW1Sn_RD(x, n) | (v))) +#define HW_FMC_TAGVDW1Sn_CLR(x, n, v) (HW_FMC_TAGVDW1Sn_WR(x, n, HW_FMC_TAGVDW1Sn_RD(x, n) & ~(v))) +#define HW_FMC_TAGVDW1Sn_TOG(x, n, v) (HW_FMC_TAGVDW1Sn_WR(x, n, HW_FMC_TAGVDW1Sn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_TAGVDW1Sn bitfields + */ + +/*! + * @name Register FMC_TAGVDW1Sn, field valid[0] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW1Sn_valid (0U) /*!< Bit position for FMC_TAGVDW1Sn_valid. */ +#define BM_FMC_TAGVDW1Sn_valid (0x00000001U) /*!< Bit mask for FMC_TAGVDW1Sn_valid. */ +#define BS_FMC_TAGVDW1Sn_valid (1U) /*!< Bit field size in bits for FMC_TAGVDW1Sn_valid. */ + +/*! @brief Read current value of the FMC_TAGVDW1Sn_valid field. */ +#define BR_FMC_TAGVDW1Sn_valid(x, n) (BITBAND_ACCESS32(HW_FMC_TAGVDW1Sn_ADDR(x, n), BP_FMC_TAGVDW1Sn_valid)) + +/*! @brief Format value for bitfield FMC_TAGVDW1Sn_valid. */ +#define BF_FMC_TAGVDW1Sn_valid(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW1Sn_valid) & BM_FMC_TAGVDW1Sn_valid) + +/*! @brief Set the valid field to a new value. */ +#define BW_FMC_TAGVDW1Sn_valid(x, n, v) (BITBAND_ACCESS32(HW_FMC_TAGVDW1Sn_ADDR(x, n), BP_FMC_TAGVDW1Sn_valid) = (v)) +/*@}*/ + +/*! + * @name Register FMC_TAGVDW1Sn, field tag[18:5] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW1Sn_tag (5U) /*!< Bit position for FMC_TAGVDW1Sn_tag. */ +#define BM_FMC_TAGVDW1Sn_tag (0x0007FFE0U) /*!< Bit mask for FMC_TAGVDW1Sn_tag. */ +#define BS_FMC_TAGVDW1Sn_tag (14U) /*!< Bit field size in bits for FMC_TAGVDW1Sn_tag. */ + +/*! @brief Read current value of the FMC_TAGVDW1Sn_tag field. */ +#define BR_FMC_TAGVDW1Sn_tag(x, n) (HW_FMC_TAGVDW1Sn(x, n).B.tag) + +/*! @brief Format value for bitfield FMC_TAGVDW1Sn_tag. */ +#define BF_FMC_TAGVDW1Sn_tag(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW1Sn_tag) & BM_FMC_TAGVDW1Sn_tag) + +/*! @brief Set the tag field to a new value. */ +#define BW_FMC_TAGVDW1Sn_tag(x, n, v) (HW_FMC_TAGVDW1Sn_WR(x, n, (HW_FMC_TAGVDW1Sn_RD(x, n) & ~BM_FMC_TAGVDW1Sn_tag) | BF_FMC_TAGVDW1Sn_tag(v))) +/*@}*/ + +/******************************************************************************* + * HW_FMC_TAGVDW2Sn - Cache Tag Storage + ******************************************************************************/ + +/*! + * @brief HW_FMC_TAGVDW2Sn - Cache Tag Storage (RW) + * + * Reset value: 0x00000000U + * + * The cache is a 4-way, set-associative cache with 8 sets. The ways are + * numbered 0-3 and the sets are numbered 0-7. In TAGVDWxSy, x denotes the way, and y + * denotes the set. This section represents tag/vld information for all sets in the + * indicated way. + */ +typedef union _hw_fmc_tagvdw2sn +{ + uint32_t U; + struct _hw_fmc_tagvdw2sn_bitfields + { + uint32_t valid : 1; /*!< [0] 1-bit valid for cache entry */ + uint32_t RESERVED0 : 4; /*!< [4:1] */ + uint32_t tag : 14; /*!< [18:5] 14-bit tag for cache entry */ + uint32_t RESERVED1 : 13; /*!< [31:19] */ + } B; +} hw_fmc_tagvdw2sn_t; + +/*! + * @name Constants and macros for entire FMC_TAGVDW2Sn register + */ +/*@{*/ +#define HW_FMC_TAGVDW2Sn_COUNT (8U) + +#define HW_FMC_TAGVDW2Sn_ADDR(x, n) ((x) + 0x140U + (0x4U * (n))) + +#define HW_FMC_TAGVDW2Sn(x, n) (*(__IO hw_fmc_tagvdw2sn_t *) HW_FMC_TAGVDW2Sn_ADDR(x, n)) +#define HW_FMC_TAGVDW2Sn_RD(x, n) (HW_FMC_TAGVDW2Sn(x, n).U) +#define HW_FMC_TAGVDW2Sn_WR(x, n, v) (HW_FMC_TAGVDW2Sn(x, n).U = (v)) +#define HW_FMC_TAGVDW2Sn_SET(x, n, v) (HW_FMC_TAGVDW2Sn_WR(x, n, HW_FMC_TAGVDW2Sn_RD(x, n) | (v))) +#define HW_FMC_TAGVDW2Sn_CLR(x, n, v) (HW_FMC_TAGVDW2Sn_WR(x, n, HW_FMC_TAGVDW2Sn_RD(x, n) & ~(v))) +#define HW_FMC_TAGVDW2Sn_TOG(x, n, v) (HW_FMC_TAGVDW2Sn_WR(x, n, HW_FMC_TAGVDW2Sn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_TAGVDW2Sn bitfields + */ + +/*! + * @name Register FMC_TAGVDW2Sn, field valid[0] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW2Sn_valid (0U) /*!< Bit position for FMC_TAGVDW2Sn_valid. */ +#define BM_FMC_TAGVDW2Sn_valid (0x00000001U) /*!< Bit mask for FMC_TAGVDW2Sn_valid. */ +#define BS_FMC_TAGVDW2Sn_valid (1U) /*!< Bit field size in bits for FMC_TAGVDW2Sn_valid. */ + +/*! @brief Read current value of the FMC_TAGVDW2Sn_valid field. */ +#define BR_FMC_TAGVDW2Sn_valid(x, n) (BITBAND_ACCESS32(HW_FMC_TAGVDW2Sn_ADDR(x, n), BP_FMC_TAGVDW2Sn_valid)) + +/*! @brief Format value for bitfield FMC_TAGVDW2Sn_valid. */ +#define BF_FMC_TAGVDW2Sn_valid(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW2Sn_valid) & BM_FMC_TAGVDW2Sn_valid) + +/*! @brief Set the valid field to a new value. */ +#define BW_FMC_TAGVDW2Sn_valid(x, n, v) (BITBAND_ACCESS32(HW_FMC_TAGVDW2Sn_ADDR(x, n), BP_FMC_TAGVDW2Sn_valid) = (v)) +/*@}*/ + +/*! + * @name Register FMC_TAGVDW2Sn, field tag[18:5] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW2Sn_tag (5U) /*!< Bit position for FMC_TAGVDW2Sn_tag. */ +#define BM_FMC_TAGVDW2Sn_tag (0x0007FFE0U) /*!< Bit mask for FMC_TAGVDW2Sn_tag. */ +#define BS_FMC_TAGVDW2Sn_tag (14U) /*!< Bit field size in bits for FMC_TAGVDW2Sn_tag. */ + +/*! @brief Read current value of the FMC_TAGVDW2Sn_tag field. */ +#define BR_FMC_TAGVDW2Sn_tag(x, n) (HW_FMC_TAGVDW2Sn(x, n).B.tag) + +/*! @brief Format value for bitfield FMC_TAGVDW2Sn_tag. */ +#define BF_FMC_TAGVDW2Sn_tag(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW2Sn_tag) & BM_FMC_TAGVDW2Sn_tag) + +/*! @brief Set the tag field to a new value. */ +#define BW_FMC_TAGVDW2Sn_tag(x, n, v) (HW_FMC_TAGVDW2Sn_WR(x, n, (HW_FMC_TAGVDW2Sn_RD(x, n) & ~BM_FMC_TAGVDW2Sn_tag) | BF_FMC_TAGVDW2Sn_tag(v))) +/*@}*/ + +/******************************************************************************* + * HW_FMC_TAGVDW3Sn - Cache Tag Storage + ******************************************************************************/ + +/*! + * @brief HW_FMC_TAGVDW3Sn - Cache Tag Storage (RW) + * + * Reset value: 0x00000000U + * + * The cache is a 4-way, set-associative cache with 8 sets. The ways are + * numbered 0-3 and the sets are numbered 0-7. In TAGVDWxSy, x denotes the way, and y + * denotes the set. This section represents tag/vld information for all sets in the + * indicated way. + */ +typedef union _hw_fmc_tagvdw3sn +{ + uint32_t U; + struct _hw_fmc_tagvdw3sn_bitfields + { + uint32_t valid : 1; /*!< [0] 1-bit valid for cache entry */ + uint32_t RESERVED0 : 4; /*!< [4:1] */ + uint32_t tag : 14; /*!< [18:5] 14-bit tag for cache entry */ + uint32_t RESERVED1 : 13; /*!< [31:19] */ + } B; +} hw_fmc_tagvdw3sn_t; + +/*! + * @name Constants and macros for entire FMC_TAGVDW3Sn register + */ +/*@{*/ +#define HW_FMC_TAGVDW3Sn_COUNT (8U) + +#define HW_FMC_TAGVDW3Sn_ADDR(x, n) ((x) + 0x160U + (0x4U * (n))) + +#define HW_FMC_TAGVDW3Sn(x, n) (*(__IO hw_fmc_tagvdw3sn_t *) HW_FMC_TAGVDW3Sn_ADDR(x, n)) +#define HW_FMC_TAGVDW3Sn_RD(x, n) (HW_FMC_TAGVDW3Sn(x, n).U) +#define HW_FMC_TAGVDW3Sn_WR(x, n, v) (HW_FMC_TAGVDW3Sn(x, n).U = (v)) +#define HW_FMC_TAGVDW3Sn_SET(x, n, v) (HW_FMC_TAGVDW3Sn_WR(x, n, HW_FMC_TAGVDW3Sn_RD(x, n) | (v))) +#define HW_FMC_TAGVDW3Sn_CLR(x, n, v) (HW_FMC_TAGVDW3Sn_WR(x, n, HW_FMC_TAGVDW3Sn_RD(x, n) & ~(v))) +#define HW_FMC_TAGVDW3Sn_TOG(x, n, v) (HW_FMC_TAGVDW3Sn_WR(x, n, HW_FMC_TAGVDW3Sn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_TAGVDW3Sn bitfields + */ + +/*! + * @name Register FMC_TAGVDW3Sn, field valid[0] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW3Sn_valid (0U) /*!< Bit position for FMC_TAGVDW3Sn_valid. */ +#define BM_FMC_TAGVDW3Sn_valid (0x00000001U) /*!< Bit mask for FMC_TAGVDW3Sn_valid. */ +#define BS_FMC_TAGVDW3Sn_valid (1U) /*!< Bit field size in bits for FMC_TAGVDW3Sn_valid. */ + +/*! @brief Read current value of the FMC_TAGVDW3Sn_valid field. */ +#define BR_FMC_TAGVDW3Sn_valid(x, n) (BITBAND_ACCESS32(HW_FMC_TAGVDW3Sn_ADDR(x, n), BP_FMC_TAGVDW3Sn_valid)) + +/*! @brief Format value for bitfield FMC_TAGVDW3Sn_valid. */ +#define BF_FMC_TAGVDW3Sn_valid(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW3Sn_valid) & BM_FMC_TAGVDW3Sn_valid) + +/*! @brief Set the valid field to a new value. */ +#define BW_FMC_TAGVDW3Sn_valid(x, n, v) (BITBAND_ACCESS32(HW_FMC_TAGVDW3Sn_ADDR(x, n), BP_FMC_TAGVDW3Sn_valid) = (v)) +/*@}*/ + +/*! + * @name Register FMC_TAGVDW3Sn, field tag[18:5] (RW) + */ +/*@{*/ +#define BP_FMC_TAGVDW3Sn_tag (5U) /*!< Bit position for FMC_TAGVDW3Sn_tag. */ +#define BM_FMC_TAGVDW3Sn_tag (0x0007FFE0U) /*!< Bit mask for FMC_TAGVDW3Sn_tag. */ +#define BS_FMC_TAGVDW3Sn_tag (14U) /*!< Bit field size in bits for FMC_TAGVDW3Sn_tag. */ + +/*! @brief Read current value of the FMC_TAGVDW3Sn_tag field. */ +#define BR_FMC_TAGVDW3Sn_tag(x, n) (HW_FMC_TAGVDW3Sn(x, n).B.tag) + +/*! @brief Format value for bitfield FMC_TAGVDW3Sn_tag. */ +#define BF_FMC_TAGVDW3Sn_tag(v) ((uint32_t)((uint32_t)(v) << BP_FMC_TAGVDW3Sn_tag) & BM_FMC_TAGVDW3Sn_tag) + +/*! @brief Set the tag field to a new value. */ +#define BW_FMC_TAGVDW3Sn_tag(x, n, v) (HW_FMC_TAGVDW3Sn_WR(x, n, (HW_FMC_TAGVDW3Sn_RD(x, n) & ~BM_FMC_TAGVDW3Sn_tag) | BF_FMC_TAGVDW3Sn_tag(v))) +/*@}*/ + +/******************************************************************************* + * HW_FMC_DATAW0SnU - Cache Data Storage (upper word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW0SnU - Cache Data Storage (upper word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the upper word (bits + * [63:32]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw0snu +{ + uint32_t U; + struct _hw_fmc_dataw0snu_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [63:32] of data entry */ + } B; +} hw_fmc_dataw0snu_t; + +/*! + * @name Constants and macros for entire FMC_DATAW0SnU register + */ +/*@{*/ +#define HW_FMC_DATAW0SnU_COUNT (8U) + +#define HW_FMC_DATAW0SnU_ADDR(x, n) ((x) + 0x200U + (0x8U * (n))) + +#define HW_FMC_DATAW0SnU(x, n) (*(__IO hw_fmc_dataw0snu_t *) HW_FMC_DATAW0SnU_ADDR(x, n)) +#define HW_FMC_DATAW0SnU_RD(x, n) (HW_FMC_DATAW0SnU(x, n).U) +#define HW_FMC_DATAW0SnU_WR(x, n, v) (HW_FMC_DATAW0SnU(x, n).U = (v)) +#define HW_FMC_DATAW0SnU_SET(x, n, v) (HW_FMC_DATAW0SnU_WR(x, n, HW_FMC_DATAW0SnU_RD(x, n) | (v))) +#define HW_FMC_DATAW0SnU_CLR(x, n, v) (HW_FMC_DATAW0SnU_WR(x, n, HW_FMC_DATAW0SnU_RD(x, n) & ~(v))) +#define HW_FMC_DATAW0SnU_TOG(x, n, v) (HW_FMC_DATAW0SnU_WR(x, n, HW_FMC_DATAW0SnU_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW0SnU bitfields + */ + +/*! + * @name Register FMC_DATAW0SnU, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW0SnU_data (0U) /*!< Bit position for FMC_DATAW0SnU_data. */ +#define BM_FMC_DATAW0SnU_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW0SnU_data. */ +#define BS_FMC_DATAW0SnU_data (32U) /*!< Bit field size in bits for FMC_DATAW0SnU_data. */ + +/*! @brief Read current value of the FMC_DATAW0SnU_data field. */ +#define BR_FMC_DATAW0SnU_data(x, n) (HW_FMC_DATAW0SnU(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW0SnU_data. */ +#define BF_FMC_DATAW0SnU_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW0SnU_data) & BM_FMC_DATAW0SnU_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW0SnU_data(x, n, v) (HW_FMC_DATAW0SnU_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_FMC_DATAW0SnL - Cache Data Storage (lower word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW0SnL - Cache Data Storage (lower word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the lower word (bits + * [31:0]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw0snl +{ + uint32_t U; + struct _hw_fmc_dataw0snl_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [31:0] of data entry */ + } B; +} hw_fmc_dataw0snl_t; + +/*! + * @name Constants and macros for entire FMC_DATAW0SnL register + */ +/*@{*/ +#define HW_FMC_DATAW0SnL_COUNT (8U) + +#define HW_FMC_DATAW0SnL_ADDR(x, n) ((x) + 0x204U + (0x8U * (n))) + +#define HW_FMC_DATAW0SnL(x, n) (*(__IO hw_fmc_dataw0snl_t *) HW_FMC_DATAW0SnL_ADDR(x, n)) +#define HW_FMC_DATAW0SnL_RD(x, n) (HW_FMC_DATAW0SnL(x, n).U) +#define HW_FMC_DATAW0SnL_WR(x, n, v) (HW_FMC_DATAW0SnL(x, n).U = (v)) +#define HW_FMC_DATAW0SnL_SET(x, n, v) (HW_FMC_DATAW0SnL_WR(x, n, HW_FMC_DATAW0SnL_RD(x, n) | (v))) +#define HW_FMC_DATAW0SnL_CLR(x, n, v) (HW_FMC_DATAW0SnL_WR(x, n, HW_FMC_DATAW0SnL_RD(x, n) & ~(v))) +#define HW_FMC_DATAW0SnL_TOG(x, n, v) (HW_FMC_DATAW0SnL_WR(x, n, HW_FMC_DATAW0SnL_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW0SnL bitfields + */ + +/*! + * @name Register FMC_DATAW0SnL, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW0SnL_data (0U) /*!< Bit position for FMC_DATAW0SnL_data. */ +#define BM_FMC_DATAW0SnL_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW0SnL_data. */ +#define BS_FMC_DATAW0SnL_data (32U) /*!< Bit field size in bits for FMC_DATAW0SnL_data. */ + +/*! @brief Read current value of the FMC_DATAW0SnL_data field. */ +#define BR_FMC_DATAW0SnL_data(x, n) (HW_FMC_DATAW0SnL(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW0SnL_data. */ +#define BF_FMC_DATAW0SnL_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW0SnL_data) & BM_FMC_DATAW0SnL_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW0SnL_data(x, n, v) (HW_FMC_DATAW0SnL_WR(x, n, v)) +/*@}*/ + +/******************************************************************************* + * HW_FMC_DATAW1SnU - Cache Data Storage (upper word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW1SnU - Cache Data Storage (upper word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the upper word (bits + * [63:32]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw1snu +{ + uint32_t U; + struct _hw_fmc_dataw1snu_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [63:32] of data entry */ + } B; +} hw_fmc_dataw1snu_t; + +/*! + * @name Constants and macros for entire FMC_DATAW1SnU register + */ +/*@{*/ +#define HW_FMC_DATAW1SnU_COUNT (8U) + +#define HW_FMC_DATAW1SnU_ADDR(x, n) ((x) + 0x240U + (0x8U * (n))) + +#define HW_FMC_DATAW1SnU(x, n) (*(__IO hw_fmc_dataw1snu_t *) HW_FMC_DATAW1SnU_ADDR(x, n)) +#define HW_FMC_DATAW1SnU_RD(x, n) (HW_FMC_DATAW1SnU(x, n).U) +#define HW_FMC_DATAW1SnU_WR(x, n, v) (HW_FMC_DATAW1SnU(x, n).U = (v)) +#define HW_FMC_DATAW1SnU_SET(x, n, v) (HW_FMC_DATAW1SnU_WR(x, n, HW_FMC_DATAW1SnU_RD(x, n) | (v))) +#define HW_FMC_DATAW1SnU_CLR(x, n, v) (HW_FMC_DATAW1SnU_WR(x, n, HW_FMC_DATAW1SnU_RD(x, n) & ~(v))) +#define HW_FMC_DATAW1SnU_TOG(x, n, v) (HW_FMC_DATAW1SnU_WR(x, n, HW_FMC_DATAW1SnU_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW1SnU bitfields + */ + +/*! + * @name Register FMC_DATAW1SnU, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW1SnU_data (0U) /*!< Bit position for FMC_DATAW1SnU_data. */ +#define BM_FMC_DATAW1SnU_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW1SnU_data. */ +#define BS_FMC_DATAW1SnU_data (32U) /*!< Bit field size in bits for FMC_DATAW1SnU_data. */ + +/*! @brief Read current value of the FMC_DATAW1SnU_data field. */ +#define BR_FMC_DATAW1SnU_data(x, n) (HW_FMC_DATAW1SnU(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW1SnU_data. */ +#define BF_FMC_DATAW1SnU_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW1SnU_data) & BM_FMC_DATAW1SnU_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW1SnU_data(x, n, v) (HW_FMC_DATAW1SnU_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_FMC_DATAW1SnL - Cache Data Storage (lower word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW1SnL - Cache Data Storage (lower word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the lower word (bits + * [31:0]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw1snl +{ + uint32_t U; + struct _hw_fmc_dataw1snl_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [31:0] of data entry */ + } B; +} hw_fmc_dataw1snl_t; + +/*! + * @name Constants and macros for entire FMC_DATAW1SnL register + */ +/*@{*/ +#define HW_FMC_DATAW1SnL_COUNT (8U) + +#define HW_FMC_DATAW1SnL_ADDR(x, n) ((x) + 0x244U + (0x8U * (n))) + +#define HW_FMC_DATAW1SnL(x, n) (*(__IO hw_fmc_dataw1snl_t *) HW_FMC_DATAW1SnL_ADDR(x, n)) +#define HW_FMC_DATAW1SnL_RD(x, n) (HW_FMC_DATAW1SnL(x, n).U) +#define HW_FMC_DATAW1SnL_WR(x, n, v) (HW_FMC_DATAW1SnL(x, n).U = (v)) +#define HW_FMC_DATAW1SnL_SET(x, n, v) (HW_FMC_DATAW1SnL_WR(x, n, HW_FMC_DATAW1SnL_RD(x, n) | (v))) +#define HW_FMC_DATAW1SnL_CLR(x, n, v) (HW_FMC_DATAW1SnL_WR(x, n, HW_FMC_DATAW1SnL_RD(x, n) & ~(v))) +#define HW_FMC_DATAW1SnL_TOG(x, n, v) (HW_FMC_DATAW1SnL_WR(x, n, HW_FMC_DATAW1SnL_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW1SnL bitfields + */ + +/*! + * @name Register FMC_DATAW1SnL, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW1SnL_data (0U) /*!< Bit position for FMC_DATAW1SnL_data. */ +#define BM_FMC_DATAW1SnL_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW1SnL_data. */ +#define BS_FMC_DATAW1SnL_data (32U) /*!< Bit field size in bits for FMC_DATAW1SnL_data. */ + +/*! @brief Read current value of the FMC_DATAW1SnL_data field. */ +#define BR_FMC_DATAW1SnL_data(x, n) (HW_FMC_DATAW1SnL(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW1SnL_data. */ +#define BF_FMC_DATAW1SnL_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW1SnL_data) & BM_FMC_DATAW1SnL_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW1SnL_data(x, n, v) (HW_FMC_DATAW1SnL_WR(x, n, v)) +/*@}*/ + +/******************************************************************************* + * HW_FMC_DATAW2SnU - Cache Data Storage (upper word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW2SnU - Cache Data Storage (upper word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the upper word (bits + * [63:32]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw2snu +{ + uint32_t U; + struct _hw_fmc_dataw2snu_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [63:32] of data entry */ + } B; +} hw_fmc_dataw2snu_t; + +/*! + * @name Constants and macros for entire FMC_DATAW2SnU register + */ +/*@{*/ +#define HW_FMC_DATAW2SnU_COUNT (8U) + +#define HW_FMC_DATAW2SnU_ADDR(x, n) ((x) + 0x280U + (0x8U * (n))) + +#define HW_FMC_DATAW2SnU(x, n) (*(__IO hw_fmc_dataw2snu_t *) HW_FMC_DATAW2SnU_ADDR(x, n)) +#define HW_FMC_DATAW2SnU_RD(x, n) (HW_FMC_DATAW2SnU(x, n).U) +#define HW_FMC_DATAW2SnU_WR(x, n, v) (HW_FMC_DATAW2SnU(x, n).U = (v)) +#define HW_FMC_DATAW2SnU_SET(x, n, v) (HW_FMC_DATAW2SnU_WR(x, n, HW_FMC_DATAW2SnU_RD(x, n) | (v))) +#define HW_FMC_DATAW2SnU_CLR(x, n, v) (HW_FMC_DATAW2SnU_WR(x, n, HW_FMC_DATAW2SnU_RD(x, n) & ~(v))) +#define HW_FMC_DATAW2SnU_TOG(x, n, v) (HW_FMC_DATAW2SnU_WR(x, n, HW_FMC_DATAW2SnU_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW2SnU bitfields + */ + +/*! + * @name Register FMC_DATAW2SnU, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW2SnU_data (0U) /*!< Bit position for FMC_DATAW2SnU_data. */ +#define BM_FMC_DATAW2SnU_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW2SnU_data. */ +#define BS_FMC_DATAW2SnU_data (32U) /*!< Bit field size in bits for FMC_DATAW2SnU_data. */ + +/*! @brief Read current value of the FMC_DATAW2SnU_data field. */ +#define BR_FMC_DATAW2SnU_data(x, n) (HW_FMC_DATAW2SnU(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW2SnU_data. */ +#define BF_FMC_DATAW2SnU_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW2SnU_data) & BM_FMC_DATAW2SnU_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW2SnU_data(x, n, v) (HW_FMC_DATAW2SnU_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_FMC_DATAW2SnL - Cache Data Storage (lower word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW2SnL - Cache Data Storage (lower word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the lower word (bits + * [31:0]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw2snl +{ + uint32_t U; + struct _hw_fmc_dataw2snl_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [31:0] of data entry */ + } B; +} hw_fmc_dataw2snl_t; + +/*! + * @name Constants and macros for entire FMC_DATAW2SnL register + */ +/*@{*/ +#define HW_FMC_DATAW2SnL_COUNT (8U) + +#define HW_FMC_DATAW2SnL_ADDR(x, n) ((x) + 0x284U + (0x8U * (n))) + +#define HW_FMC_DATAW2SnL(x, n) (*(__IO hw_fmc_dataw2snl_t *) HW_FMC_DATAW2SnL_ADDR(x, n)) +#define HW_FMC_DATAW2SnL_RD(x, n) (HW_FMC_DATAW2SnL(x, n).U) +#define HW_FMC_DATAW2SnL_WR(x, n, v) (HW_FMC_DATAW2SnL(x, n).U = (v)) +#define HW_FMC_DATAW2SnL_SET(x, n, v) (HW_FMC_DATAW2SnL_WR(x, n, HW_FMC_DATAW2SnL_RD(x, n) | (v))) +#define HW_FMC_DATAW2SnL_CLR(x, n, v) (HW_FMC_DATAW2SnL_WR(x, n, HW_FMC_DATAW2SnL_RD(x, n) & ~(v))) +#define HW_FMC_DATAW2SnL_TOG(x, n, v) (HW_FMC_DATAW2SnL_WR(x, n, HW_FMC_DATAW2SnL_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW2SnL bitfields + */ + +/*! + * @name Register FMC_DATAW2SnL, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW2SnL_data (0U) /*!< Bit position for FMC_DATAW2SnL_data. */ +#define BM_FMC_DATAW2SnL_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW2SnL_data. */ +#define BS_FMC_DATAW2SnL_data (32U) /*!< Bit field size in bits for FMC_DATAW2SnL_data. */ + +/*! @brief Read current value of the FMC_DATAW2SnL_data field. */ +#define BR_FMC_DATAW2SnL_data(x, n) (HW_FMC_DATAW2SnL(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW2SnL_data. */ +#define BF_FMC_DATAW2SnL_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW2SnL_data) & BM_FMC_DATAW2SnL_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW2SnL_data(x, n, v) (HW_FMC_DATAW2SnL_WR(x, n, v)) +/*@}*/ + +/******************************************************************************* + * HW_FMC_DATAW3SnU - Cache Data Storage (upper word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW3SnU - Cache Data Storage (upper word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the upper word (bits + * [63:32]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw3snu +{ + uint32_t U; + struct _hw_fmc_dataw3snu_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [63:32] of data entry */ + } B; +} hw_fmc_dataw3snu_t; + +/*! + * @name Constants and macros for entire FMC_DATAW3SnU register + */ +/*@{*/ +#define HW_FMC_DATAW3SnU_COUNT (8U) + +#define HW_FMC_DATAW3SnU_ADDR(x, n) ((x) + 0x2C0U + (0x8U * (n))) + +#define HW_FMC_DATAW3SnU(x, n) (*(__IO hw_fmc_dataw3snu_t *) HW_FMC_DATAW3SnU_ADDR(x, n)) +#define HW_FMC_DATAW3SnU_RD(x, n) (HW_FMC_DATAW3SnU(x, n).U) +#define HW_FMC_DATAW3SnU_WR(x, n, v) (HW_FMC_DATAW3SnU(x, n).U = (v)) +#define HW_FMC_DATAW3SnU_SET(x, n, v) (HW_FMC_DATAW3SnU_WR(x, n, HW_FMC_DATAW3SnU_RD(x, n) | (v))) +#define HW_FMC_DATAW3SnU_CLR(x, n, v) (HW_FMC_DATAW3SnU_WR(x, n, HW_FMC_DATAW3SnU_RD(x, n) & ~(v))) +#define HW_FMC_DATAW3SnU_TOG(x, n, v) (HW_FMC_DATAW3SnU_WR(x, n, HW_FMC_DATAW3SnU_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW3SnU bitfields + */ + +/*! + * @name Register FMC_DATAW3SnU, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW3SnU_data (0U) /*!< Bit position for FMC_DATAW3SnU_data. */ +#define BM_FMC_DATAW3SnU_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW3SnU_data. */ +#define BS_FMC_DATAW3SnU_data (32U) /*!< Bit field size in bits for FMC_DATAW3SnU_data. */ + +/*! @brief Read current value of the FMC_DATAW3SnU_data field. */ +#define BR_FMC_DATAW3SnU_data(x, n) (HW_FMC_DATAW3SnU(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW3SnU_data. */ +#define BF_FMC_DATAW3SnU_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW3SnU_data) & BM_FMC_DATAW3SnU_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW3SnU_data(x, n, v) (HW_FMC_DATAW3SnU_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_FMC_DATAW3SnL - Cache Data Storage (lower word) + ******************************************************************************/ + +/*! + * @brief HW_FMC_DATAW3SnL - Cache Data Storage (lower word) (RW) + * + * Reset value: 0x00000000U + * + * The cache of 64-bit entries is a 4-way, set-associative cache with 8 sets. + * The ways are numbered 0-3 and the sets are numbered 0-7. In DATAWxSyU and + * DATAWxSyL, x denotes the way, y denotes the set, and U and L represent upper and + * lower word, respectively. This section represents data for the lower word (bits + * [31:0]) of all sets in the indicated way. + */ +typedef union _hw_fmc_dataw3snl +{ + uint32_t U; + struct _hw_fmc_dataw3snl_bitfields + { + uint32_t data : 32; /*!< [31:0] Bits [31:0] of data entry */ + } B; +} hw_fmc_dataw3snl_t; + +/*! + * @name Constants and macros for entire FMC_DATAW3SnL register + */ +/*@{*/ +#define HW_FMC_DATAW3SnL_COUNT (8U) + +#define HW_FMC_DATAW3SnL_ADDR(x, n) ((x) + 0x2C4U + (0x8U * (n))) + +#define HW_FMC_DATAW3SnL(x, n) (*(__IO hw_fmc_dataw3snl_t *) HW_FMC_DATAW3SnL_ADDR(x, n)) +#define HW_FMC_DATAW3SnL_RD(x, n) (HW_FMC_DATAW3SnL(x, n).U) +#define HW_FMC_DATAW3SnL_WR(x, n, v) (HW_FMC_DATAW3SnL(x, n).U = (v)) +#define HW_FMC_DATAW3SnL_SET(x, n, v) (HW_FMC_DATAW3SnL_WR(x, n, HW_FMC_DATAW3SnL_RD(x, n) | (v))) +#define HW_FMC_DATAW3SnL_CLR(x, n, v) (HW_FMC_DATAW3SnL_WR(x, n, HW_FMC_DATAW3SnL_RD(x, n) & ~(v))) +#define HW_FMC_DATAW3SnL_TOG(x, n, v) (HW_FMC_DATAW3SnL_WR(x, n, HW_FMC_DATAW3SnL_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FMC_DATAW3SnL bitfields + */ + +/*! + * @name Register FMC_DATAW3SnL, field data[31:0] (RW) + */ +/*@{*/ +#define BP_FMC_DATAW3SnL_data (0U) /*!< Bit position for FMC_DATAW3SnL_data. */ +#define BM_FMC_DATAW3SnL_data (0xFFFFFFFFU) /*!< Bit mask for FMC_DATAW3SnL_data. */ +#define BS_FMC_DATAW3SnL_data (32U) /*!< Bit field size in bits for FMC_DATAW3SnL_data. */ + +/*! @brief Read current value of the FMC_DATAW3SnL_data field. */ +#define BR_FMC_DATAW3SnL_data(x, n) (HW_FMC_DATAW3SnL(x, n).U) + +/*! @brief Format value for bitfield FMC_DATAW3SnL_data. */ +#define BF_FMC_DATAW3SnL_data(v) ((uint32_t)((uint32_t)(v) << BP_FMC_DATAW3SnL_data) & BM_FMC_DATAW3SnL_data) + +/*! @brief Set the data field to a new value. */ +#define BW_FMC_DATAW3SnL_data(x, n, v) (HW_FMC_DATAW3SnL_WR(x, n, v)) +/*@}*/ + +/******************************************************************************* + * hw_fmc_t - module struct + ******************************************************************************/ +/*! + * @brief All FMC module registers. + */ +#pragma pack(1) +typedef struct _hw_fmc +{ + __IO hw_fmc_pfapr_t PFAPR; /*!< [0x0] Flash Access Protection Register */ + __IO hw_fmc_pfb0cr_t PFB0CR; /*!< [0x4] Flash Bank 0 Control Register */ + __IO hw_fmc_pfb1cr_t PFB1CR; /*!< [0x8] Flash Bank 1 Control Register */ + uint8_t _reserved0[244]; + __IO hw_fmc_tagvdw0sn_t TAGVDW0Sn[8]; /*!< [0x100] Cache Tag Storage */ + __IO hw_fmc_tagvdw1sn_t TAGVDW1Sn[8]; /*!< [0x120] Cache Tag Storage */ + __IO hw_fmc_tagvdw2sn_t TAGVDW2Sn[8]; /*!< [0x140] Cache Tag Storage */ + __IO hw_fmc_tagvdw3sn_t TAGVDW3Sn[8]; /*!< [0x160] Cache Tag Storage */ + uint8_t _reserved1[128]; + struct { + __IO hw_fmc_dataw0snu_t DATAW0SnU; /*!< [0x200] Cache Data Storage (upper word) */ + __IO hw_fmc_dataw0snl_t DATAW0SnL; /*!< [0x204] Cache Data Storage (lower word) */ + } DATAW0Sn[8]; + struct { + __IO hw_fmc_dataw1snu_t DATAW1SnU; /*!< [0x240] Cache Data Storage (upper word) */ + __IO hw_fmc_dataw1snl_t DATAW1SnL; /*!< [0x244] Cache Data Storage (lower word) */ + } DATAW1Sn[8]; + struct { + __IO hw_fmc_dataw2snu_t DATAW2SnU; /*!< [0x280] Cache Data Storage (upper word) */ + __IO hw_fmc_dataw2snl_t DATAW2SnL; /*!< [0x284] Cache Data Storage (lower word) */ + } DATAW2Sn[8]; + struct { + __IO hw_fmc_dataw3snu_t DATAW3SnU; /*!< [0x2C0] Cache Data Storage (upper word) */ + __IO hw_fmc_dataw3snl_t DATAW3SnL; /*!< [0x2C4] Cache Data Storage (lower word) */ + } DATAW3Sn[8]; +} hw_fmc_t; +#pragma pack() + +/*! @brief Macro to access all FMC registers. */ +/*! @param x FMC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_FMC(FMC_BASE)</code>. */ +#define HW_FMC(x) (*(hw_fmc_t *)(x)) + +#endif /* __HW_FMC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftfa.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftfa.h new file mode 100644 index 0000000000..c4059bba44 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftfa.h @@ -0,0 +1,3194 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_FTFA_REGISTERS_H__ +#define __HW_FTFA_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 FTFA + * + * Flash Memory Interface + * + * Registers defined in this header file: + * - HW_FTFA_FSTAT - Flash Status Register + * - HW_FTFA_FCNFG - Flash Configuration Register + * - HW_FTFA_FSEC - Flash Security Register + * - HW_FTFA_FOPT - Flash Option Register + * - HW_FTFA_FCCOB3 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB2 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB1 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB0 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB7 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB6 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB5 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB4 - Flash Common Command Object Registers + * - HW_FTFA_FCCOBB - Flash Common Command Object Registers + * - HW_FTFA_FCCOBA - Flash Common Command Object Registers + * - HW_FTFA_FCCOB9 - Flash Common Command Object Registers + * - HW_FTFA_FCCOB8 - Flash Common Command Object Registers + * - HW_FTFA_FPROT3 - Program Flash Protection Registers + * - HW_FTFA_FPROT2 - Program Flash Protection Registers + * - HW_FTFA_FPROT1 - Program Flash Protection Registers + * - HW_FTFA_FPROT0 - Program Flash Protection Registers + * - HW_FTFA_XACCH3 - Execute-only Access Registers + * - HW_FTFA_XACCH2 - Execute-only Access Registers + * - HW_FTFA_XACCH1 - Execute-only Access Registers + * - HW_FTFA_XACCH0 - Execute-only Access Registers + * - HW_FTFA_XACCL3 - Execute-only Access Registers + * - HW_FTFA_XACCL2 - Execute-only Access Registers + * - HW_FTFA_XACCL1 - Execute-only Access Registers + * - HW_FTFA_XACCL0 - Execute-only Access Registers + * - HW_FTFA_SACCH3 - Supervisor-only Access Registers + * - HW_FTFA_SACCH2 - Supervisor-only Access Registers + * - HW_FTFA_SACCH1 - Supervisor-only Access Registers + * - HW_FTFA_SACCH0 - Supervisor-only Access Registers + * - HW_FTFA_SACCL3 - Supervisor-only Access Registers + * - HW_FTFA_SACCL2 - Supervisor-only Access Registers + * - HW_FTFA_SACCL1 - Supervisor-only Access Registers + * - HW_FTFA_SACCL0 - Supervisor-only Access Registers + * - HW_FTFA_FACSS - Flash Access Segment Size Register + * - HW_FTFA_FACSN - Flash Access Segment Number Register + * + * - hw_ftfa_t - Struct containing all module registers. + */ + +#define HW_FTFA_INSTANCE_COUNT (1U) /*!< Number of instances of the FTFA module. */ + +/******************************************************************************* + * HW_FTFA_FSTAT - Flash Status Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FSTAT - Flash Status Register (RW) + * + * Reset value: 0x00U + * + * The FSTAT register reports the operational status of the flash memory module. + * The CCIF, RDCOLERR, ACCERR, and FPVIOL bits are readable and writable. The + * MGSTAT0 bit is read only. The unassigned bits read 0 and are not writable. When + * set, the Access Error (ACCERR) and Flash Protection Violation (FPVIOL) bits in + * this register prevent the launch of any more commands until the flag is + * cleared (by writing a one to it). + */ +typedef union _hw_ftfa_fstat +{ + uint8_t U; + struct _hw_ftfa_fstat_bitfields + { + uint8_t MGSTAT0 : 1; /*!< [0] Memory Controller Command Completion + * Status Flag */ + uint8_t RESERVED0 : 3; /*!< [3:1] */ + uint8_t FPVIOL : 1; /*!< [4] Flash Protection Violation Flag */ + uint8_t ACCERR : 1; /*!< [5] Flash Access Error Flag */ + uint8_t RDCOLERR : 1; /*!< [6] Flash Read Collision Error Flag */ + uint8_t CCIF : 1; /*!< [7] Command Complete Interrupt Flag */ + } B; +} hw_ftfa_fstat_t; + +/*! + * @name Constants and macros for entire FTFA_FSTAT register + */ +/*@{*/ +#define HW_FTFA_FSTAT_ADDR(x) ((x) + 0x0U) + +#define HW_FTFA_FSTAT(x) (*(__IO hw_ftfa_fstat_t *) HW_FTFA_FSTAT_ADDR(x)) +#define HW_FTFA_FSTAT_RD(x) (HW_FTFA_FSTAT(x).U) +#define HW_FTFA_FSTAT_WR(x, v) (HW_FTFA_FSTAT(x).U = (v)) +#define HW_FTFA_FSTAT_SET(x, v) (HW_FTFA_FSTAT_WR(x, HW_FTFA_FSTAT_RD(x) | (v))) +#define HW_FTFA_FSTAT_CLR(x, v) (HW_FTFA_FSTAT_WR(x, HW_FTFA_FSTAT_RD(x) & ~(v))) +#define HW_FTFA_FSTAT_TOG(x, v) (HW_FTFA_FSTAT_WR(x, HW_FTFA_FSTAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FSTAT bitfields + */ + +/*! + * @name Register FTFA_FSTAT, field MGSTAT0[0] (RO) + * + * The MGSTAT0 status flag is set if an error is detected during execution of a + * flash command or during the flash reset sequence. As a status flag, this field + * cannot (and need not) be cleared by the user like the other error flags in + * this register. The value of the MGSTAT0 bit for "command-N" is valid only at the + * end of the "command-N" execution when CCIF=1 and before the next command has + * been launched. At some point during the execution of "command-N+1," the + * previous result is discarded and any previous error is cleared. + */ +/*@{*/ +#define BP_FTFA_FSTAT_MGSTAT0 (0U) /*!< Bit position for FTFA_FSTAT_MGSTAT0. */ +#define BM_FTFA_FSTAT_MGSTAT0 (0x01U) /*!< Bit mask for FTFA_FSTAT_MGSTAT0. */ +#define BS_FTFA_FSTAT_MGSTAT0 (1U) /*!< Bit field size in bits for FTFA_FSTAT_MGSTAT0. */ + +/*! @brief Read current value of the FTFA_FSTAT_MGSTAT0 field. */ +#define BR_FTFA_FSTAT_MGSTAT0(x) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_MGSTAT0)) +/*@}*/ + +/*! + * @name Register FTFA_FSTAT, field FPVIOL[4] (W1C) + * + * Indicates an attempt was made to program or erase an address in a protected + * area of program flash memory during a command write sequence . While FPVIOL is + * set, the CCIF flag cannot be cleared to launch a command. The FPVIOL bit is + * cleared by writing a 1 to it. Writing a 0 to the FPVIOL bit has no effect. + * + * Values: + * - 0 - No protection violation detected + * - 1 - Protection violation detected + */ +/*@{*/ +#define BP_FTFA_FSTAT_FPVIOL (4U) /*!< Bit position for FTFA_FSTAT_FPVIOL. */ +#define BM_FTFA_FSTAT_FPVIOL (0x10U) /*!< Bit mask for FTFA_FSTAT_FPVIOL. */ +#define BS_FTFA_FSTAT_FPVIOL (1U) /*!< Bit field size in bits for FTFA_FSTAT_FPVIOL. */ + +/*! @brief Read current value of the FTFA_FSTAT_FPVIOL field. */ +#define BR_FTFA_FSTAT_FPVIOL(x) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_FPVIOL)) + +/*! @brief Format value for bitfield FTFA_FSTAT_FPVIOL. */ +#define BF_FTFA_FSTAT_FPVIOL(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FSTAT_FPVIOL) & BM_FTFA_FSTAT_FPVIOL) + +/*! @brief Set the FPVIOL field to a new value. */ +#define BW_FTFA_FSTAT_FPVIOL(x, v) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_FPVIOL) = (v)) +/*@}*/ + +/*! + * @name Register FTFA_FSTAT, field ACCERR[5] (W1C) + * + * Indicates an illegal access has occurred to a flash memory resource caused by + * a violation of the command write sequence or issuing an illegal flash + * command. While ACCERR is set, the CCIF flag cannot be cleared to launch a command. + * The ACCERR bit is cleared by writing a 1 to it. Writing a 0 to the ACCERR bit + * has no effect. + * + * Values: + * - 0 - No access error detected + * - 1 - Access error detected + */ +/*@{*/ +#define BP_FTFA_FSTAT_ACCERR (5U) /*!< Bit position for FTFA_FSTAT_ACCERR. */ +#define BM_FTFA_FSTAT_ACCERR (0x20U) /*!< Bit mask for FTFA_FSTAT_ACCERR. */ +#define BS_FTFA_FSTAT_ACCERR (1U) /*!< Bit field size in bits for FTFA_FSTAT_ACCERR. */ + +/*! @brief Read current value of the FTFA_FSTAT_ACCERR field. */ +#define BR_FTFA_FSTAT_ACCERR(x) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_ACCERR)) + +/*! @brief Format value for bitfield FTFA_FSTAT_ACCERR. */ +#define BF_FTFA_FSTAT_ACCERR(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FSTAT_ACCERR) & BM_FTFA_FSTAT_ACCERR) + +/*! @brief Set the ACCERR field to a new value. */ +#define BW_FTFA_FSTAT_ACCERR(x, v) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_ACCERR) = (v)) +/*@}*/ + +/*! + * @name Register FTFA_FSTAT, field RDCOLERR[6] (W1C) + * + * Indicates that the MCU attempted a read from a flash memory resource that was + * being manipulated by a flash command (CCIF=0). Any simultaneous access is + * detected as a collision error by the block arbitration logic. The read data in + * this case cannot be guaranteed. The RDCOLERR bit is cleared by writing a 1 to + * it. Writing a 0 to RDCOLERR has no effect. + * + * Values: + * - 0 - No collision error detected + * - 1 - Collision error detected + */ +/*@{*/ +#define BP_FTFA_FSTAT_RDCOLERR (6U) /*!< Bit position for FTFA_FSTAT_RDCOLERR. */ +#define BM_FTFA_FSTAT_RDCOLERR (0x40U) /*!< Bit mask for FTFA_FSTAT_RDCOLERR. */ +#define BS_FTFA_FSTAT_RDCOLERR (1U) /*!< Bit field size in bits for FTFA_FSTAT_RDCOLERR. */ + +/*! @brief Read current value of the FTFA_FSTAT_RDCOLERR field. */ +#define BR_FTFA_FSTAT_RDCOLERR(x) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_RDCOLERR)) + +/*! @brief Format value for bitfield FTFA_FSTAT_RDCOLERR. */ +#define BF_FTFA_FSTAT_RDCOLERR(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FSTAT_RDCOLERR) & BM_FTFA_FSTAT_RDCOLERR) + +/*! @brief Set the RDCOLERR field to a new value. */ +#define BW_FTFA_FSTAT_RDCOLERR(x, v) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_RDCOLERR) = (v)) +/*@}*/ + +/*! + * @name Register FTFA_FSTAT, field CCIF[7] (W1C) + * + * Indicates that a flash command has completed. The CCIF flag is cleared by + * writing a 1 to CCIF to launch a command, and CCIF stays low until command + * completion or command violation. CCIF is reset to 0 but is set to 1 by the memory + * controller at the end of the reset initialization sequence. Depending on how + * quickly the read occurs after reset release, the user may or may not see the 0 + * hardware reset value. + * + * Values: + * - 0 - Flash command in progress + * - 1 - Flash command has completed + */ +/*@{*/ +#define BP_FTFA_FSTAT_CCIF (7U) /*!< Bit position for FTFA_FSTAT_CCIF. */ +#define BM_FTFA_FSTAT_CCIF (0x80U) /*!< Bit mask for FTFA_FSTAT_CCIF. */ +#define BS_FTFA_FSTAT_CCIF (1U) /*!< Bit field size in bits for FTFA_FSTAT_CCIF. */ + +/*! @brief Read current value of the FTFA_FSTAT_CCIF field. */ +#define BR_FTFA_FSTAT_CCIF(x) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_CCIF)) + +/*! @brief Format value for bitfield FTFA_FSTAT_CCIF. */ +#define BF_FTFA_FSTAT_CCIF(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FSTAT_CCIF) & BM_FTFA_FSTAT_CCIF) + +/*! @brief Set the CCIF field to a new value. */ +#define BW_FTFA_FSTAT_CCIF(x, v) (BITBAND_ACCESS8(HW_FTFA_FSTAT_ADDR(x), BP_FTFA_FSTAT_CCIF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCNFG - Flash Configuration Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCNFG - Flash Configuration Register (RW) + * + * Reset value: 0x00U + * + * This register provides information on the current functional state of the + * flash memory module. The erase control bits (ERSAREQ and ERSSUSP) have write + * restrictions. The unassigned bits read as noted and are not writable. + */ +typedef union _hw_ftfa_fcnfg +{ + uint8_t U; + struct _hw_ftfa_fcnfg_bitfields + { + uint8_t RESERVED0 : 4; /*!< [3:0] */ + uint8_t ERSSUSP : 1; /*!< [4] Erase Suspend */ + uint8_t ERSAREQ : 1; /*!< [5] Erase All Request */ + uint8_t RDCOLLIE : 1; /*!< [6] Read Collision Error Interrupt Enable + * */ + uint8_t CCIE : 1; /*!< [7] Command Complete Interrupt Enable */ + } B; +} hw_ftfa_fcnfg_t; + +/*! + * @name Constants and macros for entire FTFA_FCNFG register + */ +/*@{*/ +#define HW_FTFA_FCNFG_ADDR(x) ((x) + 0x1U) + +#define HW_FTFA_FCNFG(x) (*(__IO hw_ftfa_fcnfg_t *) HW_FTFA_FCNFG_ADDR(x)) +#define HW_FTFA_FCNFG_RD(x) (HW_FTFA_FCNFG(x).U) +#define HW_FTFA_FCNFG_WR(x, v) (HW_FTFA_FCNFG(x).U = (v)) +#define HW_FTFA_FCNFG_SET(x, v) (HW_FTFA_FCNFG_WR(x, HW_FTFA_FCNFG_RD(x) | (v))) +#define HW_FTFA_FCNFG_CLR(x, v) (HW_FTFA_FCNFG_WR(x, HW_FTFA_FCNFG_RD(x) & ~(v))) +#define HW_FTFA_FCNFG_TOG(x, v) (HW_FTFA_FCNFG_WR(x, HW_FTFA_FCNFG_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCNFG bitfields + */ + +/*! + * @name Register FTFA_FCNFG, field ERSSUSP[4] (RW) + * + * Allows the user to suspend (interrupt) the Erase Flash Sector command while + * it is executing. + * + * Values: + * - 0 - No suspend requested + * - 1 - Suspend the current Erase Flash Sector command execution. + */ +/*@{*/ +#define BP_FTFA_FCNFG_ERSSUSP (4U) /*!< Bit position for FTFA_FCNFG_ERSSUSP. */ +#define BM_FTFA_FCNFG_ERSSUSP (0x10U) /*!< Bit mask for FTFA_FCNFG_ERSSUSP. */ +#define BS_FTFA_FCNFG_ERSSUSP (1U) /*!< Bit field size in bits for FTFA_FCNFG_ERSSUSP. */ + +/*! @brief Read current value of the FTFA_FCNFG_ERSSUSP field. */ +#define BR_FTFA_FCNFG_ERSSUSP(x) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_ERSSUSP)) + +/*! @brief Format value for bitfield FTFA_FCNFG_ERSSUSP. */ +#define BF_FTFA_FCNFG_ERSSUSP(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCNFG_ERSSUSP) & BM_FTFA_FCNFG_ERSSUSP) + +/*! @brief Set the ERSSUSP field to a new value. */ +#define BW_FTFA_FCNFG_ERSSUSP(x, v) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_ERSSUSP) = (v)) +/*@}*/ + +/*! + * @name Register FTFA_FCNFG, field ERSAREQ[5] (RO) + * + * Issues a request to the memory controller to execute the Erase All Blocks + * command and release security. ERSAREQ is not directly writable but is under + * indirect user control. Refer to the device's Chip Configuration details on how to + * request this command. ERSAREQ sets when an erase all request is triggered + * external to the flash memory module and CCIF is set (no command is currently being + * executed). ERSAREQ is cleared by the flash memory module when the operation + * completes. + * + * Values: + * - 0 - No request or request complete + * - 1 - Request to: run the Erase All Blocks command, verify the erased state, + * program the security byte in the Flash Configuration Field to the unsecure + * state, and release MCU security by setting the FSEC[SEC] field to the + * unsecure state. + */ +/*@{*/ +#define BP_FTFA_FCNFG_ERSAREQ (5U) /*!< Bit position for FTFA_FCNFG_ERSAREQ. */ +#define BM_FTFA_FCNFG_ERSAREQ (0x20U) /*!< Bit mask for FTFA_FCNFG_ERSAREQ. */ +#define BS_FTFA_FCNFG_ERSAREQ (1U) /*!< Bit field size in bits for FTFA_FCNFG_ERSAREQ. */ + +/*! @brief Read current value of the FTFA_FCNFG_ERSAREQ field. */ +#define BR_FTFA_FCNFG_ERSAREQ(x) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_ERSAREQ)) +/*@}*/ + +/*! + * @name Register FTFA_FCNFG, field RDCOLLIE[6] (RW) + * + * Controls interrupt generation when a flash memory read collision error occurs. + * + * Values: + * - 0 - Read collision error interrupt disabled + * - 1 - Read collision error interrupt enabled. An interrupt request is + * generated whenever a flash memory read collision error is detected (see the + * description of FSTAT[RDCOLERR]). + */ +/*@{*/ +#define BP_FTFA_FCNFG_RDCOLLIE (6U) /*!< Bit position for FTFA_FCNFG_RDCOLLIE. */ +#define BM_FTFA_FCNFG_RDCOLLIE (0x40U) /*!< Bit mask for FTFA_FCNFG_RDCOLLIE. */ +#define BS_FTFA_FCNFG_RDCOLLIE (1U) /*!< Bit field size in bits for FTFA_FCNFG_RDCOLLIE. */ + +/*! @brief Read current value of the FTFA_FCNFG_RDCOLLIE field. */ +#define BR_FTFA_FCNFG_RDCOLLIE(x) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_RDCOLLIE)) + +/*! @brief Format value for bitfield FTFA_FCNFG_RDCOLLIE. */ +#define BF_FTFA_FCNFG_RDCOLLIE(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCNFG_RDCOLLIE) & BM_FTFA_FCNFG_RDCOLLIE) + +/*! @brief Set the RDCOLLIE field to a new value. */ +#define BW_FTFA_FCNFG_RDCOLLIE(x, v) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_RDCOLLIE) = (v)) +/*@}*/ + +/*! + * @name Register FTFA_FCNFG, field CCIE[7] (RW) + * + * Controls interrupt generation when a flash command completes. + * + * Values: + * - 0 - Command complete interrupt disabled + * - 1 - Command complete interrupt enabled. An interrupt request is generated + * whenever the FSTAT[CCIF] flag is set. + */ +/*@{*/ +#define BP_FTFA_FCNFG_CCIE (7U) /*!< Bit position for FTFA_FCNFG_CCIE. */ +#define BM_FTFA_FCNFG_CCIE (0x80U) /*!< Bit mask for FTFA_FCNFG_CCIE. */ +#define BS_FTFA_FCNFG_CCIE (1U) /*!< Bit field size in bits for FTFA_FCNFG_CCIE. */ + +/*! @brief Read current value of the FTFA_FCNFG_CCIE field. */ +#define BR_FTFA_FCNFG_CCIE(x) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_CCIE)) + +/*! @brief Format value for bitfield FTFA_FCNFG_CCIE. */ +#define BF_FTFA_FCNFG_CCIE(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCNFG_CCIE) & BM_FTFA_FCNFG_CCIE) + +/*! @brief Set the CCIE field to a new value. */ +#define BW_FTFA_FCNFG_CCIE(x, v) (BITBAND_ACCESS8(HW_FTFA_FCNFG_ADDR(x), BP_FTFA_FCNFG_CCIE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FSEC - Flash Security Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FSEC - Flash Security Register (RO) + * + * Reset value: 0x00U + * + * This read-only register holds all bits associated with the security of the + * MCU and flash memory module. During the reset sequence, the register is loaded + * with the contents of the flash security byte in the Flash Configuration Field + * located in program flash memory. The flash basis for the values is signified by + * X in the reset value. + */ +typedef union _hw_ftfa_fsec +{ + uint8_t U; + struct _hw_ftfa_fsec_bitfields + { + uint8_t SEC : 2; /*!< [1:0] Flash Security */ + uint8_t FSLACC : 2; /*!< [3:2] Freescale Failure Analysis Access Code + * */ + uint8_t MEEN : 2; /*!< [5:4] Mass Erase Enable Bits */ + uint8_t KEYEN : 2; /*!< [7:6] Backdoor Key Security Enable */ + } B; +} hw_ftfa_fsec_t; + +/*! + * @name Constants and macros for entire FTFA_FSEC register + */ +/*@{*/ +#define HW_FTFA_FSEC_ADDR(x) ((x) + 0x2U) + +#define HW_FTFA_FSEC(x) (*(__I hw_ftfa_fsec_t *) HW_FTFA_FSEC_ADDR(x)) +#define HW_FTFA_FSEC_RD(x) (HW_FTFA_FSEC(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FSEC bitfields + */ + +/*! + * @name Register FTFA_FSEC, field SEC[1:0] (RO) + * + * Defines the security state of the MCU. In the secure state, the MCU limits + * access to flash memory module resources. The limitations are defined per device + * and are detailed in the Chip Configuration details. If the flash memory module + * is unsecured using backdoor key access, SEC is forced to 10b. + * + * Values: + * - 00 - MCU security status is secure. + * - 01 - MCU security status is secure. + * - 10 - MCU security status is unsecure. (The standard shipping condition of + * the flash memory module is unsecure.) + * - 11 - MCU security status is secure. + */ +/*@{*/ +#define BP_FTFA_FSEC_SEC (0U) /*!< Bit position for FTFA_FSEC_SEC. */ +#define BM_FTFA_FSEC_SEC (0x03U) /*!< Bit mask for FTFA_FSEC_SEC. */ +#define BS_FTFA_FSEC_SEC (2U) /*!< Bit field size in bits for FTFA_FSEC_SEC. */ + +/*! @brief Read current value of the FTFA_FSEC_SEC field. */ +#define BR_FTFA_FSEC_SEC(x) (HW_FTFA_FSEC(x).B.SEC) +/*@}*/ + +/*! + * @name Register FTFA_FSEC, field FSLACC[3:2] (RO) + * + * Enables or disables access to the flash memory contents during returned part + * failure analysis at Freescale. When SEC is secure and FSLACC is denied, access + * to the program flash contents is denied and any failure analysis performed by + * Freescale factory test must begin with a full erase to unsecure the part. + * When access is granted (SEC is unsecure, or SEC is secure and FSLACC is granted), + * Freescale factory testing has visibility of the current flash contents. The + * state of the FSLACC bits is only relevant when SEC is set to secure. When SEC + * is set to unsecure, the FSLACC setting does not matter. + * + * Values: + * - 00 - Freescale factory access granted + * - 01 - Freescale factory access denied + * - 10 - Freescale factory access denied + * - 11 - Freescale factory access granted + */ +/*@{*/ +#define BP_FTFA_FSEC_FSLACC (2U) /*!< Bit position for FTFA_FSEC_FSLACC. */ +#define BM_FTFA_FSEC_FSLACC (0x0CU) /*!< Bit mask for FTFA_FSEC_FSLACC. */ +#define BS_FTFA_FSEC_FSLACC (2U) /*!< Bit field size in bits for FTFA_FSEC_FSLACC. */ + +/*! @brief Read current value of the FTFA_FSEC_FSLACC field. */ +#define BR_FTFA_FSEC_FSLACC(x) (HW_FTFA_FSEC(x).B.FSLACC) +/*@}*/ + +/*! + * @name Register FTFA_FSEC, field MEEN[5:4] (RO) + * + * Enables and disables mass erase capability of the flash memory module. The + * state of this field is relevant only when SEC is set to secure outside of NVM + * Normal Mode. When SEC is set to unsecure, the MEEN setting does not matter. + * + * Values: + * - 00 - Mass erase is enabled + * - 01 - Mass erase is enabled + * - 10 - Mass erase is disabled + * - 11 - Mass erase is enabled + */ +/*@{*/ +#define BP_FTFA_FSEC_MEEN (4U) /*!< Bit position for FTFA_FSEC_MEEN. */ +#define BM_FTFA_FSEC_MEEN (0x30U) /*!< Bit mask for FTFA_FSEC_MEEN. */ +#define BS_FTFA_FSEC_MEEN (2U) /*!< Bit field size in bits for FTFA_FSEC_MEEN. */ + +/*! @brief Read current value of the FTFA_FSEC_MEEN field. */ +#define BR_FTFA_FSEC_MEEN(x) (HW_FTFA_FSEC(x).B.MEEN) +/*@}*/ + +/*! + * @name Register FTFA_FSEC, field KEYEN[7:6] (RO) + * + * Enables or disables backdoor key access to the flash memory module. + * + * Values: + * - 00 - Backdoor key access disabled + * - 01 - Backdoor key access disabled (preferred KEYEN state to disable + * backdoor key access) + * - 10 - Backdoor key access enabled + * - 11 - Backdoor key access disabled + */ +/*@{*/ +#define BP_FTFA_FSEC_KEYEN (6U) /*!< Bit position for FTFA_FSEC_KEYEN. */ +#define BM_FTFA_FSEC_KEYEN (0xC0U) /*!< Bit mask for FTFA_FSEC_KEYEN. */ +#define BS_FTFA_FSEC_KEYEN (2U) /*!< Bit field size in bits for FTFA_FSEC_KEYEN. */ + +/*! @brief Read current value of the FTFA_FSEC_KEYEN field. */ +#define BR_FTFA_FSEC_KEYEN(x) (HW_FTFA_FSEC(x).B.KEYEN) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FOPT - Flash Option Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FOPT - Flash Option Register (RO) + * + * Reset value: 0x00U + * + * The flash option register allows the MCU to customize its operations by + * examining the state of these read-only bits, which are loaded from NVM at reset. + * The function of the bits is defined in the device's Chip Configuration details. + * All bits in the register are read-only . During the reset sequence, the + * register is loaded from the flash nonvolatile option byte in the Flash Configuration + * Field located in program flash memory. The flash basis for the values is + * signified by X in the reset value. However, the register is written to 0xFF if the + * contents of the flash nonvolatile option byte are 0x00. + */ +typedef union _hw_ftfa_fopt +{ + uint8_t U; + struct _hw_ftfa_fopt_bitfields + { + uint8_t OPT : 8; /*!< [7:0] Nonvolatile Option */ + } B; +} hw_ftfa_fopt_t; + +/*! + * @name Constants and macros for entire FTFA_FOPT register + */ +/*@{*/ +#define HW_FTFA_FOPT_ADDR(x) ((x) + 0x3U) + +#define HW_FTFA_FOPT(x) (*(__I hw_ftfa_fopt_t *) HW_FTFA_FOPT_ADDR(x)) +#define HW_FTFA_FOPT_RD(x) (HW_FTFA_FOPT(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FOPT bitfields + */ + +/*! + * @name Register FTFA_FOPT, field OPT[7:0] (RO) + * + * These bits are loaded from flash to this register at reset. Refer to the + * device's Chip Configuration details for the definition and use of these bits. + */ +/*@{*/ +#define BP_FTFA_FOPT_OPT (0U) /*!< Bit position for FTFA_FOPT_OPT. */ +#define BM_FTFA_FOPT_OPT (0xFFU) /*!< Bit mask for FTFA_FOPT_OPT. */ +#define BS_FTFA_FOPT_OPT (8U) /*!< Bit field size in bits for FTFA_FOPT_OPT. */ + +/*! @brief Read current value of the FTFA_FOPT_OPT field. */ +#define BR_FTFA_FOPT_OPT(x) (HW_FTFA_FOPT(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB3 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB3 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob3 +{ + uint8_t U; + struct _hw_ftfa_fccob3_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob3_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB3 register + */ +/*@{*/ +#define HW_FTFA_FCCOB3_ADDR(x) ((x) + 0x4U) + +#define HW_FTFA_FCCOB3(x) (*(__IO hw_ftfa_fccob3_t *) HW_FTFA_FCCOB3_ADDR(x)) +#define HW_FTFA_FCCOB3_RD(x) (HW_FTFA_FCCOB3(x).U) +#define HW_FTFA_FCCOB3_WR(x, v) (HW_FTFA_FCCOB3(x).U = (v)) +#define HW_FTFA_FCCOB3_SET(x, v) (HW_FTFA_FCCOB3_WR(x, HW_FTFA_FCCOB3_RD(x) | (v))) +#define HW_FTFA_FCCOB3_CLR(x, v) (HW_FTFA_FCCOB3_WR(x, HW_FTFA_FCCOB3_RD(x) & ~(v))) +#define HW_FTFA_FCCOB3_TOG(x, v) (HW_FTFA_FCCOB3_WR(x, HW_FTFA_FCCOB3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB3 bitfields + */ + +/*! + * @name Register FTFA_FCCOB3, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB3_CCOBn (0U) /*!< Bit position for FTFA_FCCOB3_CCOBn. */ +#define BM_FTFA_FCCOB3_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB3_CCOBn. */ +#define BS_FTFA_FCCOB3_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB3_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB3_CCOBn field. */ +#define BR_FTFA_FCCOB3_CCOBn(x) (HW_FTFA_FCCOB3(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB3_CCOBn. */ +#define BF_FTFA_FCCOB3_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB3_CCOBn) & BM_FTFA_FCCOB3_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB3_CCOBn(x, v) (HW_FTFA_FCCOB3_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB2 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB2 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob2 +{ + uint8_t U; + struct _hw_ftfa_fccob2_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob2_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB2 register + */ +/*@{*/ +#define HW_FTFA_FCCOB2_ADDR(x) ((x) + 0x5U) + +#define HW_FTFA_FCCOB2(x) (*(__IO hw_ftfa_fccob2_t *) HW_FTFA_FCCOB2_ADDR(x)) +#define HW_FTFA_FCCOB2_RD(x) (HW_FTFA_FCCOB2(x).U) +#define HW_FTFA_FCCOB2_WR(x, v) (HW_FTFA_FCCOB2(x).U = (v)) +#define HW_FTFA_FCCOB2_SET(x, v) (HW_FTFA_FCCOB2_WR(x, HW_FTFA_FCCOB2_RD(x) | (v))) +#define HW_FTFA_FCCOB2_CLR(x, v) (HW_FTFA_FCCOB2_WR(x, HW_FTFA_FCCOB2_RD(x) & ~(v))) +#define HW_FTFA_FCCOB2_TOG(x, v) (HW_FTFA_FCCOB2_WR(x, HW_FTFA_FCCOB2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB2 bitfields + */ + +/*! + * @name Register FTFA_FCCOB2, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB2_CCOBn (0U) /*!< Bit position for FTFA_FCCOB2_CCOBn. */ +#define BM_FTFA_FCCOB2_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB2_CCOBn. */ +#define BS_FTFA_FCCOB2_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB2_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB2_CCOBn field. */ +#define BR_FTFA_FCCOB2_CCOBn(x) (HW_FTFA_FCCOB2(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB2_CCOBn. */ +#define BF_FTFA_FCCOB2_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB2_CCOBn) & BM_FTFA_FCCOB2_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB2_CCOBn(x, v) (HW_FTFA_FCCOB2_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB1 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB1 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob1 +{ + uint8_t U; + struct _hw_ftfa_fccob1_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob1_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB1 register + */ +/*@{*/ +#define HW_FTFA_FCCOB1_ADDR(x) ((x) + 0x6U) + +#define HW_FTFA_FCCOB1(x) (*(__IO hw_ftfa_fccob1_t *) HW_FTFA_FCCOB1_ADDR(x)) +#define HW_FTFA_FCCOB1_RD(x) (HW_FTFA_FCCOB1(x).U) +#define HW_FTFA_FCCOB1_WR(x, v) (HW_FTFA_FCCOB1(x).U = (v)) +#define HW_FTFA_FCCOB1_SET(x, v) (HW_FTFA_FCCOB1_WR(x, HW_FTFA_FCCOB1_RD(x) | (v))) +#define HW_FTFA_FCCOB1_CLR(x, v) (HW_FTFA_FCCOB1_WR(x, HW_FTFA_FCCOB1_RD(x) & ~(v))) +#define HW_FTFA_FCCOB1_TOG(x, v) (HW_FTFA_FCCOB1_WR(x, HW_FTFA_FCCOB1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB1 bitfields + */ + +/*! + * @name Register FTFA_FCCOB1, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB1_CCOBn (0U) /*!< Bit position for FTFA_FCCOB1_CCOBn. */ +#define BM_FTFA_FCCOB1_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB1_CCOBn. */ +#define BS_FTFA_FCCOB1_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB1_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB1_CCOBn field. */ +#define BR_FTFA_FCCOB1_CCOBn(x) (HW_FTFA_FCCOB1(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB1_CCOBn. */ +#define BF_FTFA_FCCOB1_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB1_CCOBn) & BM_FTFA_FCCOB1_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB1_CCOBn(x, v) (HW_FTFA_FCCOB1_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB0 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB0 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob0 +{ + uint8_t U; + struct _hw_ftfa_fccob0_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob0_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB0 register + */ +/*@{*/ +#define HW_FTFA_FCCOB0_ADDR(x) ((x) + 0x7U) + +#define HW_FTFA_FCCOB0(x) (*(__IO hw_ftfa_fccob0_t *) HW_FTFA_FCCOB0_ADDR(x)) +#define HW_FTFA_FCCOB0_RD(x) (HW_FTFA_FCCOB0(x).U) +#define HW_FTFA_FCCOB0_WR(x, v) (HW_FTFA_FCCOB0(x).U = (v)) +#define HW_FTFA_FCCOB0_SET(x, v) (HW_FTFA_FCCOB0_WR(x, HW_FTFA_FCCOB0_RD(x) | (v))) +#define HW_FTFA_FCCOB0_CLR(x, v) (HW_FTFA_FCCOB0_WR(x, HW_FTFA_FCCOB0_RD(x) & ~(v))) +#define HW_FTFA_FCCOB0_TOG(x, v) (HW_FTFA_FCCOB0_WR(x, HW_FTFA_FCCOB0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB0 bitfields + */ + +/*! + * @name Register FTFA_FCCOB0, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB0_CCOBn (0U) /*!< Bit position for FTFA_FCCOB0_CCOBn. */ +#define BM_FTFA_FCCOB0_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB0_CCOBn. */ +#define BS_FTFA_FCCOB0_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB0_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB0_CCOBn field. */ +#define BR_FTFA_FCCOB0_CCOBn(x) (HW_FTFA_FCCOB0(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB0_CCOBn. */ +#define BF_FTFA_FCCOB0_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB0_CCOBn) & BM_FTFA_FCCOB0_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB0_CCOBn(x, v) (HW_FTFA_FCCOB0_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB7 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB7 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob7 +{ + uint8_t U; + struct _hw_ftfa_fccob7_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob7_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB7 register + */ +/*@{*/ +#define HW_FTFA_FCCOB7_ADDR(x) ((x) + 0x8U) + +#define HW_FTFA_FCCOB7(x) (*(__IO hw_ftfa_fccob7_t *) HW_FTFA_FCCOB7_ADDR(x)) +#define HW_FTFA_FCCOB7_RD(x) (HW_FTFA_FCCOB7(x).U) +#define HW_FTFA_FCCOB7_WR(x, v) (HW_FTFA_FCCOB7(x).U = (v)) +#define HW_FTFA_FCCOB7_SET(x, v) (HW_FTFA_FCCOB7_WR(x, HW_FTFA_FCCOB7_RD(x) | (v))) +#define HW_FTFA_FCCOB7_CLR(x, v) (HW_FTFA_FCCOB7_WR(x, HW_FTFA_FCCOB7_RD(x) & ~(v))) +#define HW_FTFA_FCCOB7_TOG(x, v) (HW_FTFA_FCCOB7_WR(x, HW_FTFA_FCCOB7_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB7 bitfields + */ + +/*! + * @name Register FTFA_FCCOB7, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB7_CCOBn (0U) /*!< Bit position for FTFA_FCCOB7_CCOBn. */ +#define BM_FTFA_FCCOB7_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB7_CCOBn. */ +#define BS_FTFA_FCCOB7_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB7_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB7_CCOBn field. */ +#define BR_FTFA_FCCOB7_CCOBn(x) (HW_FTFA_FCCOB7(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB7_CCOBn. */ +#define BF_FTFA_FCCOB7_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB7_CCOBn) & BM_FTFA_FCCOB7_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB7_CCOBn(x, v) (HW_FTFA_FCCOB7_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB6 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB6 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob6 +{ + uint8_t U; + struct _hw_ftfa_fccob6_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob6_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB6 register + */ +/*@{*/ +#define HW_FTFA_FCCOB6_ADDR(x) ((x) + 0x9U) + +#define HW_FTFA_FCCOB6(x) (*(__IO hw_ftfa_fccob6_t *) HW_FTFA_FCCOB6_ADDR(x)) +#define HW_FTFA_FCCOB6_RD(x) (HW_FTFA_FCCOB6(x).U) +#define HW_FTFA_FCCOB6_WR(x, v) (HW_FTFA_FCCOB6(x).U = (v)) +#define HW_FTFA_FCCOB6_SET(x, v) (HW_FTFA_FCCOB6_WR(x, HW_FTFA_FCCOB6_RD(x) | (v))) +#define HW_FTFA_FCCOB6_CLR(x, v) (HW_FTFA_FCCOB6_WR(x, HW_FTFA_FCCOB6_RD(x) & ~(v))) +#define HW_FTFA_FCCOB6_TOG(x, v) (HW_FTFA_FCCOB6_WR(x, HW_FTFA_FCCOB6_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB6 bitfields + */ + +/*! + * @name Register FTFA_FCCOB6, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB6_CCOBn (0U) /*!< Bit position for FTFA_FCCOB6_CCOBn. */ +#define BM_FTFA_FCCOB6_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB6_CCOBn. */ +#define BS_FTFA_FCCOB6_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB6_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB6_CCOBn field. */ +#define BR_FTFA_FCCOB6_CCOBn(x) (HW_FTFA_FCCOB6(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB6_CCOBn. */ +#define BF_FTFA_FCCOB6_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB6_CCOBn) & BM_FTFA_FCCOB6_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB6_CCOBn(x, v) (HW_FTFA_FCCOB6_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB5 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB5 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob5 +{ + uint8_t U; + struct _hw_ftfa_fccob5_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob5_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB5 register + */ +/*@{*/ +#define HW_FTFA_FCCOB5_ADDR(x) ((x) + 0xAU) + +#define HW_FTFA_FCCOB5(x) (*(__IO hw_ftfa_fccob5_t *) HW_FTFA_FCCOB5_ADDR(x)) +#define HW_FTFA_FCCOB5_RD(x) (HW_FTFA_FCCOB5(x).U) +#define HW_FTFA_FCCOB5_WR(x, v) (HW_FTFA_FCCOB5(x).U = (v)) +#define HW_FTFA_FCCOB5_SET(x, v) (HW_FTFA_FCCOB5_WR(x, HW_FTFA_FCCOB5_RD(x) | (v))) +#define HW_FTFA_FCCOB5_CLR(x, v) (HW_FTFA_FCCOB5_WR(x, HW_FTFA_FCCOB5_RD(x) & ~(v))) +#define HW_FTFA_FCCOB5_TOG(x, v) (HW_FTFA_FCCOB5_WR(x, HW_FTFA_FCCOB5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB5 bitfields + */ + +/*! + * @name Register FTFA_FCCOB5, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB5_CCOBn (0U) /*!< Bit position for FTFA_FCCOB5_CCOBn. */ +#define BM_FTFA_FCCOB5_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB5_CCOBn. */ +#define BS_FTFA_FCCOB5_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB5_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB5_CCOBn field. */ +#define BR_FTFA_FCCOB5_CCOBn(x) (HW_FTFA_FCCOB5(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB5_CCOBn. */ +#define BF_FTFA_FCCOB5_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB5_CCOBn) & BM_FTFA_FCCOB5_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB5_CCOBn(x, v) (HW_FTFA_FCCOB5_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB4 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB4 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob4 +{ + uint8_t U; + struct _hw_ftfa_fccob4_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob4_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB4 register + */ +/*@{*/ +#define HW_FTFA_FCCOB4_ADDR(x) ((x) + 0xBU) + +#define HW_FTFA_FCCOB4(x) (*(__IO hw_ftfa_fccob4_t *) HW_FTFA_FCCOB4_ADDR(x)) +#define HW_FTFA_FCCOB4_RD(x) (HW_FTFA_FCCOB4(x).U) +#define HW_FTFA_FCCOB4_WR(x, v) (HW_FTFA_FCCOB4(x).U = (v)) +#define HW_FTFA_FCCOB4_SET(x, v) (HW_FTFA_FCCOB4_WR(x, HW_FTFA_FCCOB4_RD(x) | (v))) +#define HW_FTFA_FCCOB4_CLR(x, v) (HW_FTFA_FCCOB4_WR(x, HW_FTFA_FCCOB4_RD(x) & ~(v))) +#define HW_FTFA_FCCOB4_TOG(x, v) (HW_FTFA_FCCOB4_WR(x, HW_FTFA_FCCOB4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB4 bitfields + */ + +/*! + * @name Register FTFA_FCCOB4, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB4_CCOBn (0U) /*!< Bit position for FTFA_FCCOB4_CCOBn. */ +#define BM_FTFA_FCCOB4_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB4_CCOBn. */ +#define BS_FTFA_FCCOB4_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB4_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB4_CCOBn field. */ +#define BR_FTFA_FCCOB4_CCOBn(x) (HW_FTFA_FCCOB4(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB4_CCOBn. */ +#define BF_FTFA_FCCOB4_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB4_CCOBn) & BM_FTFA_FCCOB4_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB4_CCOBn(x, v) (HW_FTFA_FCCOB4_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOBB - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOBB - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccobb +{ + uint8_t U; + struct _hw_ftfa_fccobb_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccobb_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOBB register + */ +/*@{*/ +#define HW_FTFA_FCCOBB_ADDR(x) ((x) + 0xCU) + +#define HW_FTFA_FCCOBB(x) (*(__IO hw_ftfa_fccobb_t *) HW_FTFA_FCCOBB_ADDR(x)) +#define HW_FTFA_FCCOBB_RD(x) (HW_FTFA_FCCOBB(x).U) +#define HW_FTFA_FCCOBB_WR(x, v) (HW_FTFA_FCCOBB(x).U = (v)) +#define HW_FTFA_FCCOBB_SET(x, v) (HW_FTFA_FCCOBB_WR(x, HW_FTFA_FCCOBB_RD(x) | (v))) +#define HW_FTFA_FCCOBB_CLR(x, v) (HW_FTFA_FCCOBB_WR(x, HW_FTFA_FCCOBB_RD(x) & ~(v))) +#define HW_FTFA_FCCOBB_TOG(x, v) (HW_FTFA_FCCOBB_WR(x, HW_FTFA_FCCOBB_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOBB bitfields + */ + +/*! + * @name Register FTFA_FCCOBB, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOBB_CCOBn (0U) /*!< Bit position for FTFA_FCCOBB_CCOBn. */ +#define BM_FTFA_FCCOBB_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOBB_CCOBn. */ +#define BS_FTFA_FCCOBB_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOBB_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOBB_CCOBn field. */ +#define BR_FTFA_FCCOBB_CCOBn(x) (HW_FTFA_FCCOBB(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOBB_CCOBn. */ +#define BF_FTFA_FCCOBB_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOBB_CCOBn) & BM_FTFA_FCCOBB_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOBB_CCOBn(x, v) (HW_FTFA_FCCOBB_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOBA - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOBA - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccoba +{ + uint8_t U; + struct _hw_ftfa_fccoba_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccoba_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOBA register + */ +/*@{*/ +#define HW_FTFA_FCCOBA_ADDR(x) ((x) + 0xDU) + +#define HW_FTFA_FCCOBA(x) (*(__IO hw_ftfa_fccoba_t *) HW_FTFA_FCCOBA_ADDR(x)) +#define HW_FTFA_FCCOBA_RD(x) (HW_FTFA_FCCOBA(x).U) +#define HW_FTFA_FCCOBA_WR(x, v) (HW_FTFA_FCCOBA(x).U = (v)) +#define HW_FTFA_FCCOBA_SET(x, v) (HW_FTFA_FCCOBA_WR(x, HW_FTFA_FCCOBA_RD(x) | (v))) +#define HW_FTFA_FCCOBA_CLR(x, v) (HW_FTFA_FCCOBA_WR(x, HW_FTFA_FCCOBA_RD(x) & ~(v))) +#define HW_FTFA_FCCOBA_TOG(x, v) (HW_FTFA_FCCOBA_WR(x, HW_FTFA_FCCOBA_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOBA bitfields + */ + +/*! + * @name Register FTFA_FCCOBA, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOBA_CCOBn (0U) /*!< Bit position for FTFA_FCCOBA_CCOBn. */ +#define BM_FTFA_FCCOBA_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOBA_CCOBn. */ +#define BS_FTFA_FCCOBA_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOBA_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOBA_CCOBn field. */ +#define BR_FTFA_FCCOBA_CCOBn(x) (HW_FTFA_FCCOBA(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOBA_CCOBn. */ +#define BF_FTFA_FCCOBA_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOBA_CCOBn) & BM_FTFA_FCCOBA_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOBA_CCOBn(x, v) (HW_FTFA_FCCOBA_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB9 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB9 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob9 +{ + uint8_t U; + struct _hw_ftfa_fccob9_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob9_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB9 register + */ +/*@{*/ +#define HW_FTFA_FCCOB9_ADDR(x) ((x) + 0xEU) + +#define HW_FTFA_FCCOB9(x) (*(__IO hw_ftfa_fccob9_t *) HW_FTFA_FCCOB9_ADDR(x)) +#define HW_FTFA_FCCOB9_RD(x) (HW_FTFA_FCCOB9(x).U) +#define HW_FTFA_FCCOB9_WR(x, v) (HW_FTFA_FCCOB9(x).U = (v)) +#define HW_FTFA_FCCOB9_SET(x, v) (HW_FTFA_FCCOB9_WR(x, HW_FTFA_FCCOB9_RD(x) | (v))) +#define HW_FTFA_FCCOB9_CLR(x, v) (HW_FTFA_FCCOB9_WR(x, HW_FTFA_FCCOB9_RD(x) & ~(v))) +#define HW_FTFA_FCCOB9_TOG(x, v) (HW_FTFA_FCCOB9_WR(x, HW_FTFA_FCCOB9_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB9 bitfields + */ + +/*! + * @name Register FTFA_FCCOB9, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB9_CCOBn (0U) /*!< Bit position for FTFA_FCCOB9_CCOBn. */ +#define BM_FTFA_FCCOB9_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB9_CCOBn. */ +#define BS_FTFA_FCCOB9_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB9_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB9_CCOBn field. */ +#define BR_FTFA_FCCOB9_CCOBn(x) (HW_FTFA_FCCOB9(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB9_CCOBn. */ +#define BF_FTFA_FCCOB9_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB9_CCOBn) & BM_FTFA_FCCOB9_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB9_CCOBn(x, v) (HW_FTFA_FCCOB9_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FCCOB8 - Flash Common Command Object Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FCCOB8 - Flash Common Command Object Registers (RW) + * + * Reset value: 0x00U + * + * The FCCOB register group provides 12 bytes for command codes and parameters. + * The individual bytes within the set append a 0-B hex identifier to the FCCOB + * register name: FCCOB0, FCCOB1, ..., FCCOBB. + */ +typedef union _hw_ftfa_fccob8 +{ + uint8_t U; + struct _hw_ftfa_fccob8_bitfields + { + uint8_t CCOBn : 8; /*!< [7:0] */ + } B; +} hw_ftfa_fccob8_t; + +/*! + * @name Constants and macros for entire FTFA_FCCOB8 register + */ +/*@{*/ +#define HW_FTFA_FCCOB8_ADDR(x) ((x) + 0xFU) + +#define HW_FTFA_FCCOB8(x) (*(__IO hw_ftfa_fccob8_t *) HW_FTFA_FCCOB8_ADDR(x)) +#define HW_FTFA_FCCOB8_RD(x) (HW_FTFA_FCCOB8(x).U) +#define HW_FTFA_FCCOB8_WR(x, v) (HW_FTFA_FCCOB8(x).U = (v)) +#define HW_FTFA_FCCOB8_SET(x, v) (HW_FTFA_FCCOB8_WR(x, HW_FTFA_FCCOB8_RD(x) | (v))) +#define HW_FTFA_FCCOB8_CLR(x, v) (HW_FTFA_FCCOB8_WR(x, HW_FTFA_FCCOB8_RD(x) & ~(v))) +#define HW_FTFA_FCCOB8_TOG(x, v) (HW_FTFA_FCCOB8_WR(x, HW_FTFA_FCCOB8_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FCCOB8 bitfields + */ + +/*! + * @name Register FTFA_FCCOB8, field CCOBn[7:0] (RW) + * + * The FCCOB register provides a command code and relevant parameters to the + * memory controller. The individual registers that compose the FCCOB data set can + * be written in any order, but you must provide all needed values, which vary + * from command to command. First, set up all required FCCOB fields and then + * initiate the command's execution by writing a 1 to the FSTAT[CCIF] bit. This clears + * the CCIF bit, which locks all FCCOB parameter fields and they cannot be changed + * by the user until the command completes (CCIF returns to 1). No command + * buffering or queueing is provided; the next command can be loaded only after the + * current command completes. Some commands return information to the FCCOB + * registers. Any values returned to FCCOB are available for reading after the + * FSTAT[CCIF] flag returns to 1 by the memory controller. The following table shows a + * generic flash command format. The first FCCOB register, FCCOB0, always contains + * the command code. This 8-bit value defines the command to be executed. The + * command code is followed by the parameters required for this specific flash + * command, typically an address and/or data values. The command parameter table is + * written in terms of FCCOB Number (which is equivalent to the byte number). This + * number is a reference to the FCCOB register name and is not the register + * address. FCCOB Number Typical Command Parameter Contents [7:0] 0 FCMD (a code that + * defines the flash command) 1 Flash address [23:16] 2 Flash address [15:8] 3 + * Flash address [7:0] 4 Data Byte 0 5 Data Byte 1 6 Data Byte 2 7 Data Byte 3 8 + * Data Byte 4 9 Data Byte 5 A Data Byte 6 B Data Byte 7 FCCOB Endianness : The + * FCCOB register group uses a big endian addressing convention. For all command + * parameter fields larger than 1 byte, the most significant data resides in the + * lowest FCCOB register number. + */ +/*@{*/ +#define BP_FTFA_FCCOB8_CCOBn (0U) /*!< Bit position for FTFA_FCCOB8_CCOBn. */ +#define BM_FTFA_FCCOB8_CCOBn (0xFFU) /*!< Bit mask for FTFA_FCCOB8_CCOBn. */ +#define BS_FTFA_FCCOB8_CCOBn (8U) /*!< Bit field size in bits for FTFA_FCCOB8_CCOBn. */ + +/*! @brief Read current value of the FTFA_FCCOB8_CCOBn field. */ +#define BR_FTFA_FCCOB8_CCOBn(x) (HW_FTFA_FCCOB8(x).U) + +/*! @brief Format value for bitfield FTFA_FCCOB8_CCOBn. */ +#define BF_FTFA_FCCOB8_CCOBn(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FCCOB8_CCOBn) & BM_FTFA_FCCOB8_CCOBn) + +/*! @brief Set the CCOBn field to a new value. */ +#define BW_FTFA_FCCOB8_CCOBn(x, v) (HW_FTFA_FCCOB8_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FPROT3 - Program Flash Protection Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FPROT3 - Program Flash Protection Registers (RW) + * + * Reset value: 0x00U + * + * The FPROT registers define which logical program flash regions are protected + * from program and erase operations. Protected flash regions cannot have their + * content changed; that is, these regions cannot be programmed and cannot be + * erased by any flash command. Unprotected regions can be changed by program and + * erase operations. The four FPROT registers allow up to 32 protectable regions. + * Each bit protects a 1/32 region of the program flash memory except for memory + * configurations with less than 32 KB of program flash where each assigned bit + * protects 1 KB . For configurations with 24 KB of program flash memory or less, + * FPROT0 is not used. For configurations with 16 KB of program flash memory or + * less, FPROT1 is not used. For configurations with 8 KB of program flash memory, + * FPROT2 is not used. The bitfields are defined in each register as follows: + * Program flash protection register Program flash protection bits FPROT0 PROT[31:24] + * FPROT1 PROT[23:16] FPROT2 PROT[15:8] FPROT3 PROT[7:0] During the reset + * sequence, the FPROT registers are loaded with the contents of the program flash + * protection bytes in the Flash Configuration Field as indicated in the following + * table. Program flash protection register Flash Configuration Field offset + * address FPROT0 0x000B FPROT1 0x000A FPROT2 0x0009 FPROT3 0x0008 To change the + * program flash protection that is loaded during the reset sequence, unprotect the + * sector of program flash memory that contains the Flash Configuration Field. Then, + * reprogram the program flash protection byte. + */ +typedef union _hw_ftfa_fprot3 +{ + uint8_t U; + struct _hw_ftfa_fprot3_bitfields + { + uint8_t PROT : 8; /*!< [7:0] Program Flash Region Protect */ + } B; +} hw_ftfa_fprot3_t; + +/*! + * @name Constants and macros for entire FTFA_FPROT3 register + */ +/*@{*/ +#define HW_FTFA_FPROT3_ADDR(x) ((x) + 0x10U) + +#define HW_FTFA_FPROT3(x) (*(__IO hw_ftfa_fprot3_t *) HW_FTFA_FPROT3_ADDR(x)) +#define HW_FTFA_FPROT3_RD(x) (HW_FTFA_FPROT3(x).U) +#define HW_FTFA_FPROT3_WR(x, v) (HW_FTFA_FPROT3(x).U = (v)) +#define HW_FTFA_FPROT3_SET(x, v) (HW_FTFA_FPROT3_WR(x, HW_FTFA_FPROT3_RD(x) | (v))) +#define HW_FTFA_FPROT3_CLR(x, v) (HW_FTFA_FPROT3_WR(x, HW_FTFA_FPROT3_RD(x) & ~(v))) +#define HW_FTFA_FPROT3_TOG(x, v) (HW_FTFA_FPROT3_WR(x, HW_FTFA_FPROT3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FPROT3 bitfields + */ + +/*! + * @name Register FTFA_FPROT3, field PROT[7:0] (RW) + * + * Each program flash region can be protected from program and erase operations + * by setting the associated PROT bit. In NVM Normal mode: The protection can + * only be increased, meaning that currently unprotected memory can be protected, + * but currently protected memory cannot be unprotected. Since unprotected regions + * are marked with a 1 and protected regions use a 0, only writes changing 1s to + * 0s are accepted. This 1-to-0 transition check is performed on a bit-by-bit + * basis. Those FPROT bits with 1-to-0 transitions are accepted while all bits with + * 0-to-1 transitions are ignored. In NVM Special mode: All bits of FPROT are + * writable without restriction. Unprotected areas can be protected and protected + * areas can be unprotected. The user must never write to any FPROT register while + * a command is running (CCIF=0). Trying to alter data in any protected area in + * the program flash memory results in a protection violation error and sets the + * FSTAT[FPVIOL] bit. A full block erase of a program flash block is not possible + * if it contains any protected region. Each bit in the 32-bit protection + * register represents 1/32 of the total program flash except for configurations where + * program flash memory is less than 32 KB. For configurations with less than 32 + * KB of program flash memory, each assigned bit represents 1 KB. + * + * Values: + * - 0 - Program flash region is protected. + * - 1 - Program flash region is not protected + */ +/*@{*/ +#define BP_FTFA_FPROT3_PROT (0U) /*!< Bit position for FTFA_FPROT3_PROT. */ +#define BM_FTFA_FPROT3_PROT (0xFFU) /*!< Bit mask for FTFA_FPROT3_PROT. */ +#define BS_FTFA_FPROT3_PROT (8U) /*!< Bit field size in bits for FTFA_FPROT3_PROT. */ + +/*! @brief Read current value of the FTFA_FPROT3_PROT field. */ +#define BR_FTFA_FPROT3_PROT(x) (HW_FTFA_FPROT3(x).U) + +/*! @brief Format value for bitfield FTFA_FPROT3_PROT. */ +#define BF_FTFA_FPROT3_PROT(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FPROT3_PROT) & BM_FTFA_FPROT3_PROT) + +/*! @brief Set the PROT field to a new value. */ +#define BW_FTFA_FPROT3_PROT(x, v) (HW_FTFA_FPROT3_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FPROT2 - Program Flash Protection Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FPROT2 - Program Flash Protection Registers (RW) + * + * Reset value: 0x00U + * + * The FPROT registers define which logical program flash regions are protected + * from program and erase operations. Protected flash regions cannot have their + * content changed; that is, these regions cannot be programmed and cannot be + * erased by any flash command. Unprotected regions can be changed by program and + * erase operations. The four FPROT registers allow up to 32 protectable regions. + * Each bit protects a 1/32 region of the program flash memory except for memory + * configurations with less than 32 KB of program flash where each assigned bit + * protects 1 KB . For configurations with 24 KB of program flash memory or less, + * FPROT0 is not used. For configurations with 16 KB of program flash memory or + * less, FPROT1 is not used. For configurations with 8 KB of program flash memory, + * FPROT2 is not used. The bitfields are defined in each register as follows: + * Program flash protection register Program flash protection bits FPROT0 PROT[31:24] + * FPROT1 PROT[23:16] FPROT2 PROT[15:8] FPROT3 PROT[7:0] During the reset + * sequence, the FPROT registers are loaded with the contents of the program flash + * protection bytes in the Flash Configuration Field as indicated in the following + * table. Program flash protection register Flash Configuration Field offset + * address FPROT0 0x000B FPROT1 0x000A FPROT2 0x0009 FPROT3 0x0008 To change the + * program flash protection that is loaded during the reset sequence, unprotect the + * sector of program flash memory that contains the Flash Configuration Field. Then, + * reprogram the program flash protection byte. + */ +typedef union _hw_ftfa_fprot2 +{ + uint8_t U; + struct _hw_ftfa_fprot2_bitfields + { + uint8_t PROT : 8; /*!< [7:0] Program Flash Region Protect */ + } B; +} hw_ftfa_fprot2_t; + +/*! + * @name Constants and macros for entire FTFA_FPROT2 register + */ +/*@{*/ +#define HW_FTFA_FPROT2_ADDR(x) ((x) + 0x11U) + +#define HW_FTFA_FPROT2(x) (*(__IO hw_ftfa_fprot2_t *) HW_FTFA_FPROT2_ADDR(x)) +#define HW_FTFA_FPROT2_RD(x) (HW_FTFA_FPROT2(x).U) +#define HW_FTFA_FPROT2_WR(x, v) (HW_FTFA_FPROT2(x).U = (v)) +#define HW_FTFA_FPROT2_SET(x, v) (HW_FTFA_FPROT2_WR(x, HW_FTFA_FPROT2_RD(x) | (v))) +#define HW_FTFA_FPROT2_CLR(x, v) (HW_FTFA_FPROT2_WR(x, HW_FTFA_FPROT2_RD(x) & ~(v))) +#define HW_FTFA_FPROT2_TOG(x, v) (HW_FTFA_FPROT2_WR(x, HW_FTFA_FPROT2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FPROT2 bitfields + */ + +/*! + * @name Register FTFA_FPROT2, field PROT[7:0] (RW) + * + * Each program flash region can be protected from program and erase operations + * by setting the associated PROT bit. In NVM Normal mode: The protection can + * only be increased, meaning that currently unprotected memory can be protected, + * but currently protected memory cannot be unprotected. Since unprotected regions + * are marked with a 1 and protected regions use a 0, only writes changing 1s to + * 0s are accepted. This 1-to-0 transition check is performed on a bit-by-bit + * basis. Those FPROT bits with 1-to-0 transitions are accepted while all bits with + * 0-to-1 transitions are ignored. In NVM Special mode: All bits of FPROT are + * writable without restriction. Unprotected areas can be protected and protected + * areas can be unprotected. The user must never write to any FPROT register while + * a command is running (CCIF=0). Trying to alter data in any protected area in + * the program flash memory results in a protection violation error and sets the + * FSTAT[FPVIOL] bit. A full block erase of a program flash block is not possible + * if it contains any protected region. Each bit in the 32-bit protection + * register represents 1/32 of the total program flash except for configurations where + * program flash memory is less than 32 KB. For configurations with less than 32 + * KB of program flash memory, each assigned bit represents 1 KB. + * + * Values: + * - 0 - Program flash region is protected. + * - 1 - Program flash region is not protected + */ +/*@{*/ +#define BP_FTFA_FPROT2_PROT (0U) /*!< Bit position for FTFA_FPROT2_PROT. */ +#define BM_FTFA_FPROT2_PROT (0xFFU) /*!< Bit mask for FTFA_FPROT2_PROT. */ +#define BS_FTFA_FPROT2_PROT (8U) /*!< Bit field size in bits for FTFA_FPROT2_PROT. */ + +/*! @brief Read current value of the FTFA_FPROT2_PROT field. */ +#define BR_FTFA_FPROT2_PROT(x) (HW_FTFA_FPROT2(x).U) + +/*! @brief Format value for bitfield FTFA_FPROT2_PROT. */ +#define BF_FTFA_FPROT2_PROT(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FPROT2_PROT) & BM_FTFA_FPROT2_PROT) + +/*! @brief Set the PROT field to a new value. */ +#define BW_FTFA_FPROT2_PROT(x, v) (HW_FTFA_FPROT2_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FPROT1 - Program Flash Protection Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FPROT1 - Program Flash Protection Registers (RW) + * + * Reset value: 0x00U + * + * The FPROT registers define which logical program flash regions are protected + * from program and erase operations. Protected flash regions cannot have their + * content changed; that is, these regions cannot be programmed and cannot be + * erased by any flash command. Unprotected regions can be changed by program and + * erase operations. The four FPROT registers allow up to 32 protectable regions. + * Each bit protects a 1/32 region of the program flash memory except for memory + * configurations with less than 32 KB of program flash where each assigned bit + * protects 1 KB . For configurations with 24 KB of program flash memory or less, + * FPROT0 is not used. For configurations with 16 KB of program flash memory or + * less, FPROT1 is not used. For configurations with 8 KB of program flash memory, + * FPROT2 is not used. The bitfields are defined in each register as follows: + * Program flash protection register Program flash protection bits FPROT0 PROT[31:24] + * FPROT1 PROT[23:16] FPROT2 PROT[15:8] FPROT3 PROT[7:0] During the reset + * sequence, the FPROT registers are loaded with the contents of the program flash + * protection bytes in the Flash Configuration Field as indicated in the following + * table. Program flash protection register Flash Configuration Field offset + * address FPROT0 0x000B FPROT1 0x000A FPROT2 0x0009 FPROT3 0x0008 To change the + * program flash protection that is loaded during the reset sequence, unprotect the + * sector of program flash memory that contains the Flash Configuration Field. Then, + * reprogram the program flash protection byte. + */ +typedef union _hw_ftfa_fprot1 +{ + uint8_t U; + struct _hw_ftfa_fprot1_bitfields + { + uint8_t PROT : 8; /*!< [7:0] Program Flash Region Protect */ + } B; +} hw_ftfa_fprot1_t; + +/*! + * @name Constants and macros for entire FTFA_FPROT1 register + */ +/*@{*/ +#define HW_FTFA_FPROT1_ADDR(x) ((x) + 0x12U) + +#define HW_FTFA_FPROT1(x) (*(__IO hw_ftfa_fprot1_t *) HW_FTFA_FPROT1_ADDR(x)) +#define HW_FTFA_FPROT1_RD(x) (HW_FTFA_FPROT1(x).U) +#define HW_FTFA_FPROT1_WR(x, v) (HW_FTFA_FPROT1(x).U = (v)) +#define HW_FTFA_FPROT1_SET(x, v) (HW_FTFA_FPROT1_WR(x, HW_FTFA_FPROT1_RD(x) | (v))) +#define HW_FTFA_FPROT1_CLR(x, v) (HW_FTFA_FPROT1_WR(x, HW_FTFA_FPROT1_RD(x) & ~(v))) +#define HW_FTFA_FPROT1_TOG(x, v) (HW_FTFA_FPROT1_WR(x, HW_FTFA_FPROT1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FPROT1 bitfields + */ + +/*! + * @name Register FTFA_FPROT1, field PROT[7:0] (RW) + * + * Each program flash region can be protected from program and erase operations + * by setting the associated PROT bit. In NVM Normal mode: The protection can + * only be increased, meaning that currently unprotected memory can be protected, + * but currently protected memory cannot be unprotected. Since unprotected regions + * are marked with a 1 and protected regions use a 0, only writes changing 1s to + * 0s are accepted. This 1-to-0 transition check is performed on a bit-by-bit + * basis. Those FPROT bits with 1-to-0 transitions are accepted while all bits with + * 0-to-1 transitions are ignored. In NVM Special mode: All bits of FPROT are + * writable without restriction. Unprotected areas can be protected and protected + * areas can be unprotected. The user must never write to any FPROT register while + * a command is running (CCIF=0). Trying to alter data in any protected area in + * the program flash memory results in a protection violation error and sets the + * FSTAT[FPVIOL] bit. A full block erase of a program flash block is not possible + * if it contains any protected region. Each bit in the 32-bit protection + * register represents 1/32 of the total program flash except for configurations where + * program flash memory is less than 32 KB. For configurations with less than 32 + * KB of program flash memory, each assigned bit represents 1 KB. + * + * Values: + * - 0 - Program flash region is protected. + * - 1 - Program flash region is not protected + */ +/*@{*/ +#define BP_FTFA_FPROT1_PROT (0U) /*!< Bit position for FTFA_FPROT1_PROT. */ +#define BM_FTFA_FPROT1_PROT (0xFFU) /*!< Bit mask for FTFA_FPROT1_PROT. */ +#define BS_FTFA_FPROT1_PROT (8U) /*!< Bit field size in bits for FTFA_FPROT1_PROT. */ + +/*! @brief Read current value of the FTFA_FPROT1_PROT field. */ +#define BR_FTFA_FPROT1_PROT(x) (HW_FTFA_FPROT1(x).U) + +/*! @brief Format value for bitfield FTFA_FPROT1_PROT. */ +#define BF_FTFA_FPROT1_PROT(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FPROT1_PROT) & BM_FTFA_FPROT1_PROT) + +/*! @brief Set the PROT field to a new value. */ +#define BW_FTFA_FPROT1_PROT(x, v) (HW_FTFA_FPROT1_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FPROT0 - Program Flash Protection Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FPROT0 - Program Flash Protection Registers (RW) + * + * Reset value: 0x00U + * + * The FPROT registers define which logical program flash regions are protected + * from program and erase operations. Protected flash regions cannot have their + * content changed; that is, these regions cannot be programmed and cannot be + * erased by any flash command. Unprotected regions can be changed by program and + * erase operations. The four FPROT registers allow up to 32 protectable regions. + * Each bit protects a 1/32 region of the program flash memory except for memory + * configurations with less than 32 KB of program flash where each assigned bit + * protects 1 KB . For configurations with 24 KB of program flash memory or less, + * FPROT0 is not used. For configurations with 16 KB of program flash memory or + * less, FPROT1 is not used. For configurations with 8 KB of program flash memory, + * FPROT2 is not used. The bitfields are defined in each register as follows: + * Program flash protection register Program flash protection bits FPROT0 PROT[31:24] + * FPROT1 PROT[23:16] FPROT2 PROT[15:8] FPROT3 PROT[7:0] During the reset + * sequence, the FPROT registers are loaded with the contents of the program flash + * protection bytes in the Flash Configuration Field as indicated in the following + * table. Program flash protection register Flash Configuration Field offset + * address FPROT0 0x000B FPROT1 0x000A FPROT2 0x0009 FPROT3 0x0008 To change the + * program flash protection that is loaded during the reset sequence, unprotect the + * sector of program flash memory that contains the Flash Configuration Field. Then, + * reprogram the program flash protection byte. + */ +typedef union _hw_ftfa_fprot0 +{ + uint8_t U; + struct _hw_ftfa_fprot0_bitfields + { + uint8_t PROT : 8; /*!< [7:0] Program Flash Region Protect */ + } B; +} hw_ftfa_fprot0_t; + +/*! + * @name Constants and macros for entire FTFA_FPROT0 register + */ +/*@{*/ +#define HW_FTFA_FPROT0_ADDR(x) ((x) + 0x13U) + +#define HW_FTFA_FPROT0(x) (*(__IO hw_ftfa_fprot0_t *) HW_FTFA_FPROT0_ADDR(x)) +#define HW_FTFA_FPROT0_RD(x) (HW_FTFA_FPROT0(x).U) +#define HW_FTFA_FPROT0_WR(x, v) (HW_FTFA_FPROT0(x).U = (v)) +#define HW_FTFA_FPROT0_SET(x, v) (HW_FTFA_FPROT0_WR(x, HW_FTFA_FPROT0_RD(x) | (v))) +#define HW_FTFA_FPROT0_CLR(x, v) (HW_FTFA_FPROT0_WR(x, HW_FTFA_FPROT0_RD(x) & ~(v))) +#define HW_FTFA_FPROT0_TOG(x, v) (HW_FTFA_FPROT0_WR(x, HW_FTFA_FPROT0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FPROT0 bitfields + */ + +/*! + * @name Register FTFA_FPROT0, field PROT[7:0] (RW) + * + * Each program flash region can be protected from program and erase operations + * by setting the associated PROT bit. In NVM Normal mode: The protection can + * only be increased, meaning that currently unprotected memory can be protected, + * but currently protected memory cannot be unprotected. Since unprotected regions + * are marked with a 1 and protected regions use a 0, only writes changing 1s to + * 0s are accepted. This 1-to-0 transition check is performed on a bit-by-bit + * basis. Those FPROT bits with 1-to-0 transitions are accepted while all bits with + * 0-to-1 transitions are ignored. In NVM Special mode: All bits of FPROT are + * writable without restriction. Unprotected areas can be protected and protected + * areas can be unprotected. The user must never write to any FPROT register while + * a command is running (CCIF=0). Trying to alter data in any protected area in + * the program flash memory results in a protection violation error and sets the + * FSTAT[FPVIOL] bit. A full block erase of a program flash block is not possible + * if it contains any protected region. Each bit in the 32-bit protection + * register represents 1/32 of the total program flash except for configurations where + * program flash memory is less than 32 KB. For configurations with less than 32 + * KB of program flash memory, each assigned bit represents 1 KB. + * + * Values: + * - 0 - Program flash region is protected. + * - 1 - Program flash region is not protected + */ +/*@{*/ +#define BP_FTFA_FPROT0_PROT (0U) /*!< Bit position for FTFA_FPROT0_PROT. */ +#define BM_FTFA_FPROT0_PROT (0xFFU) /*!< Bit mask for FTFA_FPROT0_PROT. */ +#define BS_FTFA_FPROT0_PROT (8U) /*!< Bit field size in bits for FTFA_FPROT0_PROT. */ + +/*! @brief Read current value of the FTFA_FPROT0_PROT field. */ +#define BR_FTFA_FPROT0_PROT(x) (HW_FTFA_FPROT0(x).U) + +/*! @brief Format value for bitfield FTFA_FPROT0_PROT. */ +#define BF_FTFA_FPROT0_PROT(v) ((uint8_t)((uint8_t)(v) << BP_FTFA_FPROT0_PROT) & BM_FTFA_FPROT0_PROT) + +/*! @brief Set the PROT field to a new value. */ +#define BW_FTFA_FPROT0_PROT(x, v) (HW_FTFA_FPROT0_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCH3 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCH3 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xacch3 +{ + uint8_t U; + struct _hw_ftfa_xacch3_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xacch3_t; + +/*! + * @name Constants and macros for entire FTFA_XACCH3 register + */ +/*@{*/ +#define HW_FTFA_XACCH3_ADDR(x) ((x) + 0x18U) + +#define HW_FTFA_XACCH3(x) (*(__I hw_ftfa_xacch3_t *) HW_FTFA_XACCH3_ADDR(x)) +#define HW_FTFA_XACCH3_RD(x) (HW_FTFA_XACCH3(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCH3 bitfields + */ + +/*! + * @name Register FTFA_XACCH3, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCH3_XA (0U) /*!< Bit position for FTFA_XACCH3_XA. */ +#define BM_FTFA_XACCH3_XA (0xFFU) /*!< Bit mask for FTFA_XACCH3_XA. */ +#define BS_FTFA_XACCH3_XA (8U) /*!< Bit field size in bits for FTFA_XACCH3_XA. */ + +/*! @brief Read current value of the FTFA_XACCH3_XA field. */ +#define BR_FTFA_XACCH3_XA(x) (HW_FTFA_XACCH3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCH2 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCH2 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xacch2 +{ + uint8_t U; + struct _hw_ftfa_xacch2_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xacch2_t; + +/*! + * @name Constants and macros for entire FTFA_XACCH2 register + */ +/*@{*/ +#define HW_FTFA_XACCH2_ADDR(x) ((x) + 0x19U) + +#define HW_FTFA_XACCH2(x) (*(__I hw_ftfa_xacch2_t *) HW_FTFA_XACCH2_ADDR(x)) +#define HW_FTFA_XACCH2_RD(x) (HW_FTFA_XACCH2(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCH2 bitfields + */ + +/*! + * @name Register FTFA_XACCH2, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCH2_XA (0U) /*!< Bit position for FTFA_XACCH2_XA. */ +#define BM_FTFA_XACCH2_XA (0xFFU) /*!< Bit mask for FTFA_XACCH2_XA. */ +#define BS_FTFA_XACCH2_XA (8U) /*!< Bit field size in bits for FTFA_XACCH2_XA. */ + +/*! @brief Read current value of the FTFA_XACCH2_XA field. */ +#define BR_FTFA_XACCH2_XA(x) (HW_FTFA_XACCH2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCH1 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCH1 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xacch1 +{ + uint8_t U; + struct _hw_ftfa_xacch1_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xacch1_t; + +/*! + * @name Constants and macros for entire FTFA_XACCH1 register + */ +/*@{*/ +#define HW_FTFA_XACCH1_ADDR(x) ((x) + 0x1AU) + +#define HW_FTFA_XACCH1(x) (*(__I hw_ftfa_xacch1_t *) HW_FTFA_XACCH1_ADDR(x)) +#define HW_FTFA_XACCH1_RD(x) (HW_FTFA_XACCH1(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCH1 bitfields + */ + +/*! + * @name Register FTFA_XACCH1, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCH1_XA (0U) /*!< Bit position for FTFA_XACCH1_XA. */ +#define BM_FTFA_XACCH1_XA (0xFFU) /*!< Bit mask for FTFA_XACCH1_XA. */ +#define BS_FTFA_XACCH1_XA (8U) /*!< Bit field size in bits for FTFA_XACCH1_XA. */ + +/*! @brief Read current value of the FTFA_XACCH1_XA field. */ +#define BR_FTFA_XACCH1_XA(x) (HW_FTFA_XACCH1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCH0 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCH0 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xacch0 +{ + uint8_t U; + struct _hw_ftfa_xacch0_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xacch0_t; + +/*! + * @name Constants and macros for entire FTFA_XACCH0 register + */ +/*@{*/ +#define HW_FTFA_XACCH0_ADDR(x) ((x) + 0x1BU) + +#define HW_FTFA_XACCH0(x) (*(__I hw_ftfa_xacch0_t *) HW_FTFA_XACCH0_ADDR(x)) +#define HW_FTFA_XACCH0_RD(x) (HW_FTFA_XACCH0(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCH0 bitfields + */ + +/*! + * @name Register FTFA_XACCH0, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCH0_XA (0U) /*!< Bit position for FTFA_XACCH0_XA. */ +#define BM_FTFA_XACCH0_XA (0xFFU) /*!< Bit mask for FTFA_XACCH0_XA. */ +#define BS_FTFA_XACCH0_XA (8U) /*!< Bit field size in bits for FTFA_XACCH0_XA. */ + +/*! @brief Read current value of the FTFA_XACCH0_XA field. */ +#define BR_FTFA_XACCH0_XA(x) (HW_FTFA_XACCH0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCL3 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCL3 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xaccl3 +{ + uint8_t U; + struct _hw_ftfa_xaccl3_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xaccl3_t; + +/*! + * @name Constants and macros for entire FTFA_XACCL3 register + */ +/*@{*/ +#define HW_FTFA_XACCL3_ADDR(x) ((x) + 0x1CU) + +#define HW_FTFA_XACCL3(x) (*(__I hw_ftfa_xaccl3_t *) HW_FTFA_XACCL3_ADDR(x)) +#define HW_FTFA_XACCL3_RD(x) (HW_FTFA_XACCL3(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCL3 bitfields + */ + +/*! + * @name Register FTFA_XACCL3, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCL3_XA (0U) /*!< Bit position for FTFA_XACCL3_XA. */ +#define BM_FTFA_XACCL3_XA (0xFFU) /*!< Bit mask for FTFA_XACCL3_XA. */ +#define BS_FTFA_XACCL3_XA (8U) /*!< Bit field size in bits for FTFA_XACCL3_XA. */ + +/*! @brief Read current value of the FTFA_XACCL3_XA field. */ +#define BR_FTFA_XACCL3_XA(x) (HW_FTFA_XACCL3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCL2 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCL2 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xaccl2 +{ + uint8_t U; + struct _hw_ftfa_xaccl2_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xaccl2_t; + +/*! + * @name Constants and macros for entire FTFA_XACCL2 register + */ +/*@{*/ +#define HW_FTFA_XACCL2_ADDR(x) ((x) + 0x1DU) + +#define HW_FTFA_XACCL2(x) (*(__I hw_ftfa_xaccl2_t *) HW_FTFA_XACCL2_ADDR(x)) +#define HW_FTFA_XACCL2_RD(x) (HW_FTFA_XACCL2(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCL2 bitfields + */ + +/*! + * @name Register FTFA_XACCL2, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCL2_XA (0U) /*!< Bit position for FTFA_XACCL2_XA. */ +#define BM_FTFA_XACCL2_XA (0xFFU) /*!< Bit mask for FTFA_XACCL2_XA. */ +#define BS_FTFA_XACCL2_XA (8U) /*!< Bit field size in bits for FTFA_XACCL2_XA. */ + +/*! @brief Read current value of the FTFA_XACCL2_XA field. */ +#define BR_FTFA_XACCL2_XA(x) (HW_FTFA_XACCL2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCL1 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCL1 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xaccl1 +{ + uint8_t U; + struct _hw_ftfa_xaccl1_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xaccl1_t; + +/*! + * @name Constants and macros for entire FTFA_XACCL1 register + */ +/*@{*/ +#define HW_FTFA_XACCL1_ADDR(x) ((x) + 0x1EU) + +#define HW_FTFA_XACCL1(x) (*(__I hw_ftfa_xaccl1_t *) HW_FTFA_XACCL1_ADDR(x)) +#define HW_FTFA_XACCL1_RD(x) (HW_FTFA_XACCL1(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCL1 bitfields + */ + +/*! + * @name Register FTFA_XACCL1, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCL1_XA (0U) /*!< Bit position for FTFA_XACCL1_XA. */ +#define BM_FTFA_XACCL1_XA (0xFFU) /*!< Bit mask for FTFA_XACCL1_XA. */ +#define BS_FTFA_XACCL1_XA (8U) /*!< Bit field size in bits for FTFA_XACCL1_XA. */ + +/*! @brief Read current value of the FTFA_XACCL1_XA field. */ +#define BR_FTFA_XACCL1_XA(x) (HW_FTFA_XACCL1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_XACCL0 - Execute-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_XACCL0 - Execute-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The XACC registers define which logical program flash segments are restricted + * to data read or execute only or both data and instruction fetches. The eight + * XACC registers allow up to 64 restricted segments of equal memory size. + * Execute-only access register Program flash execute-only access bits XACCH0 XA[63:56] + * XACCH1 XA[55:48] XACCH2 XA[47:40] XACCH3 XA[39:32] XACCL0 XA[31:24] XACCL1 + * XA[23:16] XACCL2 XA[15:8] XACCL3 XA[7:0] During the reset sequence, the XACC + * registers are loaded with the logical AND of Program Flash IFR addresses A and B + * as indicated in the following table. Execute-only access register Program + * Flash IFR address A Program Flash IFR address B XACCH0 0xA3 0xAB XACCH1 0xA2 0xAA + * XACCH2 0xA1 0xA9 XACCH3 0xA0 0xA8 XACCL0 0xA7 0xAF XACCL1 0xA6 0xAE XACCL2 + * 0xA5 0xAD XACCL3 0xA4 0xAC Use the Program Once command to program the + * execute-only access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_xaccl0 +{ + uint8_t U; + struct _hw_ftfa_xaccl0_bitfields + { + uint8_t XA : 8; /*!< [7:0] Execute-only access control */ + } B; +} hw_ftfa_xaccl0_t; + +/*! + * @name Constants and macros for entire FTFA_XACCL0 register + */ +/*@{*/ +#define HW_FTFA_XACCL0_ADDR(x) ((x) + 0x1FU) + +#define HW_FTFA_XACCL0(x) (*(__I hw_ftfa_xaccl0_t *) HW_FTFA_XACCL0_ADDR(x)) +#define HW_FTFA_XACCL0_RD(x) (HW_FTFA_XACCL0(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_XACCL0 bitfields + */ + +/*! + * @name Register FTFA_XACCL0, field XA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in execute mode only (as an + * instruction fetch) + * - 1 - Associated segment is accessible as data or in execute mode + */ +/*@{*/ +#define BP_FTFA_XACCL0_XA (0U) /*!< Bit position for FTFA_XACCL0_XA. */ +#define BM_FTFA_XACCL0_XA (0xFFU) /*!< Bit mask for FTFA_XACCL0_XA. */ +#define BS_FTFA_XACCL0_XA (8U) /*!< Bit field size in bits for FTFA_XACCL0_XA. */ + +/*! @brief Read current value of the FTFA_XACCL0_XA field. */ +#define BR_FTFA_XACCL0_XA(x) (HW_FTFA_XACCL0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCH3 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCH3 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_sacch3 +{ + uint8_t U; + struct _hw_ftfa_sacch3_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_sacch3_t; + +/*! + * @name Constants and macros for entire FTFA_SACCH3 register + */ +/*@{*/ +#define HW_FTFA_SACCH3_ADDR(x) ((x) + 0x20U) + +#define HW_FTFA_SACCH3(x) (*(__I hw_ftfa_sacch3_t *) HW_FTFA_SACCH3_ADDR(x)) +#define HW_FTFA_SACCH3_RD(x) (HW_FTFA_SACCH3(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCH3 bitfields + */ + +/*! + * @name Register FTFA_SACCH3, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCH3_SA (0U) /*!< Bit position for FTFA_SACCH3_SA. */ +#define BM_FTFA_SACCH3_SA (0xFFU) /*!< Bit mask for FTFA_SACCH3_SA. */ +#define BS_FTFA_SACCH3_SA (8U) /*!< Bit field size in bits for FTFA_SACCH3_SA. */ + +/*! @brief Read current value of the FTFA_SACCH3_SA field. */ +#define BR_FTFA_SACCH3_SA(x) (HW_FTFA_SACCH3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCH2 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCH2 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_sacch2 +{ + uint8_t U; + struct _hw_ftfa_sacch2_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_sacch2_t; + +/*! + * @name Constants and macros for entire FTFA_SACCH2 register + */ +/*@{*/ +#define HW_FTFA_SACCH2_ADDR(x) ((x) + 0x21U) + +#define HW_FTFA_SACCH2(x) (*(__I hw_ftfa_sacch2_t *) HW_FTFA_SACCH2_ADDR(x)) +#define HW_FTFA_SACCH2_RD(x) (HW_FTFA_SACCH2(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCH2 bitfields + */ + +/*! + * @name Register FTFA_SACCH2, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCH2_SA (0U) /*!< Bit position for FTFA_SACCH2_SA. */ +#define BM_FTFA_SACCH2_SA (0xFFU) /*!< Bit mask for FTFA_SACCH2_SA. */ +#define BS_FTFA_SACCH2_SA (8U) /*!< Bit field size in bits for FTFA_SACCH2_SA. */ + +/*! @brief Read current value of the FTFA_SACCH2_SA field. */ +#define BR_FTFA_SACCH2_SA(x) (HW_FTFA_SACCH2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCH1 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCH1 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_sacch1 +{ + uint8_t U; + struct _hw_ftfa_sacch1_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_sacch1_t; + +/*! + * @name Constants and macros for entire FTFA_SACCH1 register + */ +/*@{*/ +#define HW_FTFA_SACCH1_ADDR(x) ((x) + 0x22U) + +#define HW_FTFA_SACCH1(x) (*(__I hw_ftfa_sacch1_t *) HW_FTFA_SACCH1_ADDR(x)) +#define HW_FTFA_SACCH1_RD(x) (HW_FTFA_SACCH1(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCH1 bitfields + */ + +/*! + * @name Register FTFA_SACCH1, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCH1_SA (0U) /*!< Bit position for FTFA_SACCH1_SA. */ +#define BM_FTFA_SACCH1_SA (0xFFU) /*!< Bit mask for FTFA_SACCH1_SA. */ +#define BS_FTFA_SACCH1_SA (8U) /*!< Bit field size in bits for FTFA_SACCH1_SA. */ + +/*! @brief Read current value of the FTFA_SACCH1_SA field. */ +#define BR_FTFA_SACCH1_SA(x) (HW_FTFA_SACCH1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCH0 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCH0 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_sacch0 +{ + uint8_t U; + struct _hw_ftfa_sacch0_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_sacch0_t; + +/*! + * @name Constants and macros for entire FTFA_SACCH0 register + */ +/*@{*/ +#define HW_FTFA_SACCH0_ADDR(x) ((x) + 0x23U) + +#define HW_FTFA_SACCH0(x) (*(__I hw_ftfa_sacch0_t *) HW_FTFA_SACCH0_ADDR(x)) +#define HW_FTFA_SACCH0_RD(x) (HW_FTFA_SACCH0(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCH0 bitfields + */ + +/*! + * @name Register FTFA_SACCH0, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCH0_SA (0U) /*!< Bit position for FTFA_SACCH0_SA. */ +#define BM_FTFA_SACCH0_SA (0xFFU) /*!< Bit mask for FTFA_SACCH0_SA. */ +#define BS_FTFA_SACCH0_SA (8U) /*!< Bit field size in bits for FTFA_SACCH0_SA. */ + +/*! @brief Read current value of the FTFA_SACCH0_SA field. */ +#define BR_FTFA_SACCH0_SA(x) (HW_FTFA_SACCH0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCL3 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCL3 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_saccl3 +{ + uint8_t U; + struct _hw_ftfa_saccl3_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_saccl3_t; + +/*! + * @name Constants and macros for entire FTFA_SACCL3 register + */ +/*@{*/ +#define HW_FTFA_SACCL3_ADDR(x) ((x) + 0x24U) + +#define HW_FTFA_SACCL3(x) (*(__I hw_ftfa_saccl3_t *) HW_FTFA_SACCL3_ADDR(x)) +#define HW_FTFA_SACCL3_RD(x) (HW_FTFA_SACCL3(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCL3 bitfields + */ + +/*! + * @name Register FTFA_SACCL3, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCL3_SA (0U) /*!< Bit position for FTFA_SACCL3_SA. */ +#define BM_FTFA_SACCL3_SA (0xFFU) /*!< Bit mask for FTFA_SACCL3_SA. */ +#define BS_FTFA_SACCL3_SA (8U) /*!< Bit field size in bits for FTFA_SACCL3_SA. */ + +/*! @brief Read current value of the FTFA_SACCL3_SA field. */ +#define BR_FTFA_SACCL3_SA(x) (HW_FTFA_SACCL3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCL2 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCL2 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_saccl2 +{ + uint8_t U; + struct _hw_ftfa_saccl2_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_saccl2_t; + +/*! + * @name Constants and macros for entire FTFA_SACCL2 register + */ +/*@{*/ +#define HW_FTFA_SACCL2_ADDR(x) ((x) + 0x25U) + +#define HW_FTFA_SACCL2(x) (*(__I hw_ftfa_saccl2_t *) HW_FTFA_SACCL2_ADDR(x)) +#define HW_FTFA_SACCL2_RD(x) (HW_FTFA_SACCL2(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCL2 bitfields + */ + +/*! + * @name Register FTFA_SACCL2, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCL2_SA (0U) /*!< Bit position for FTFA_SACCL2_SA. */ +#define BM_FTFA_SACCL2_SA (0xFFU) /*!< Bit mask for FTFA_SACCL2_SA. */ +#define BS_FTFA_SACCL2_SA (8U) /*!< Bit field size in bits for FTFA_SACCL2_SA. */ + +/*! @brief Read current value of the FTFA_SACCL2_SA field. */ +#define BR_FTFA_SACCL2_SA(x) (HW_FTFA_SACCL2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCL1 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCL1 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_saccl1 +{ + uint8_t U; + struct _hw_ftfa_saccl1_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_saccl1_t; + +/*! + * @name Constants and macros for entire FTFA_SACCL1 register + */ +/*@{*/ +#define HW_FTFA_SACCL1_ADDR(x) ((x) + 0x26U) + +#define HW_FTFA_SACCL1(x) (*(__I hw_ftfa_saccl1_t *) HW_FTFA_SACCL1_ADDR(x)) +#define HW_FTFA_SACCL1_RD(x) (HW_FTFA_SACCL1(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCL1 bitfields + */ + +/*! + * @name Register FTFA_SACCL1, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCL1_SA (0U) /*!< Bit position for FTFA_SACCL1_SA. */ +#define BM_FTFA_SACCL1_SA (0xFFU) /*!< Bit mask for FTFA_SACCL1_SA. */ +#define BS_FTFA_SACCL1_SA (8U) /*!< Bit field size in bits for FTFA_SACCL1_SA. */ + +/*! @brief Read current value of the FTFA_SACCL1_SA field. */ +#define BR_FTFA_SACCL1_SA(x) (HW_FTFA_SACCL1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_SACCL0 - Supervisor-only Access Registers + ******************************************************************************/ + +/*! + * @brief HW_FTFA_SACCL0 - Supervisor-only Access Registers (RO) + * + * Reset value: 0x00U + * + * The SACC registers define which logical program flash segments are restricted + * to supervisor only or user and supervisor access. The eight SACC registers + * allow up to 64 restricted segments of equal memory size. Supervisor-only access + * register Program flash supervisor-only access bits SACCH0 SA[63:56] SACCH1 + * SA[55:48] SACCH2 SA[47:40] SACCH3 SA[39:32] SACCL0 SA[31:24] SACCL1 SA[23:16] + * SACCL2 SA[15:8] SACCL3 SA[7:0] During the reset sequence, the SACC registers are + * loaded with the logical AND of Program Flash IFR addresses A and B as + * indicated in the following table. Supervisor-only access register Program Flash IFR + * address A Program Flash IFR address B SACCH0 0xB3 0xBB SACCH1 0xB2 0xBA SACCH2 + * 0xB1 0xB9 SACCH3 0xB0 0xB8 SACCL0 0xB7 0xBF SACCL1 0xB6 0xBE SACCL2 0xB5 0xBD + * SACCL3 0xB4 0xBC Use the Program Once command to program the supervisor-only + * access control fields that are loaded during the reset sequence. + */ +typedef union _hw_ftfa_saccl0 +{ + uint8_t U; + struct _hw_ftfa_saccl0_bitfields + { + uint8_t SA : 8; /*!< [7:0] Supervisor-only access control */ + } B; +} hw_ftfa_saccl0_t; + +/*! + * @name Constants and macros for entire FTFA_SACCL0 register + */ +/*@{*/ +#define HW_FTFA_SACCL0_ADDR(x) ((x) + 0x27U) + +#define HW_FTFA_SACCL0(x) (*(__I hw_ftfa_saccl0_t *) HW_FTFA_SACCL0_ADDR(x)) +#define HW_FTFA_SACCL0_RD(x) (HW_FTFA_SACCL0(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_SACCL0 bitfields + */ + +/*! + * @name Register FTFA_SACCL0, field SA[7:0] (RO) + * + * Values: + * - 0 - Associated segment is accessible in supervisor mode only + * - 1 - Associated segment is accessible in user or supervisor mode + */ +/*@{*/ +#define BP_FTFA_SACCL0_SA (0U) /*!< Bit position for FTFA_SACCL0_SA. */ +#define BM_FTFA_SACCL0_SA (0xFFU) /*!< Bit mask for FTFA_SACCL0_SA. */ +#define BS_FTFA_SACCL0_SA (8U) /*!< Bit field size in bits for FTFA_SACCL0_SA. */ + +/*! @brief Read current value of the FTFA_SACCL0_SA field. */ +#define BR_FTFA_SACCL0_SA(x) (HW_FTFA_SACCL0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FACSS - Flash Access Segment Size Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FACSS - Flash Access Segment Size Register (RO) + * + * Reset value: 0x00U + * + * The flash access segment size register determines which bits in the address + * are used to index into the SACC and XACC bitmaps to get the appropriate + * permission flags. All bits in the register are read-only. The contents of this + * register are loaded during the reset sequence. + */ +typedef union _hw_ftfa_facss +{ + uint8_t U; + struct _hw_ftfa_facss_bitfields + { + uint8_t SGSIZE : 8; /*!< [7:0] Segment Size */ + } B; +} hw_ftfa_facss_t; + +/*! + * @name Constants and macros for entire FTFA_FACSS register + */ +/*@{*/ +#define HW_FTFA_FACSS_ADDR(x) ((x) + 0x28U) + +#define HW_FTFA_FACSS(x) (*(__I hw_ftfa_facss_t *) HW_FTFA_FACSS_ADDR(x)) +#define HW_FTFA_FACSS_RD(x) (HW_FTFA_FACSS(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FACSS bitfields + */ + +/*! + * @name Register FTFA_FACSS, field SGSIZE[7:0] (RO) + * + * The segment size is a fixed value based on the available program flash size + * divided by NUMSG. Program Flash Size Segment Size Segment Size Encoding 64 + * KBytes 2 KBytes 0x3 128 KBytes 4 KBytes 0x4 160 KBytes 4 KBytes 0x4 256 KBytes 4 + * KBytes 0x4 512 KBytes 8 KBytes 0x5 + */ +/*@{*/ +#define BP_FTFA_FACSS_SGSIZE (0U) /*!< Bit position for FTFA_FACSS_SGSIZE. */ +#define BM_FTFA_FACSS_SGSIZE (0xFFU) /*!< Bit mask for FTFA_FACSS_SGSIZE. */ +#define BS_FTFA_FACSS_SGSIZE (8U) /*!< Bit field size in bits for FTFA_FACSS_SGSIZE. */ + +/*! @brief Read current value of the FTFA_FACSS_SGSIZE field. */ +#define BR_FTFA_FACSS_SGSIZE(x) (HW_FTFA_FACSS(x).U) +/*@}*/ + +/******************************************************************************* + * HW_FTFA_FACSN - Flash Access Segment Number Register + ******************************************************************************/ + +/*! + * @brief HW_FTFA_FACSN - Flash Access Segment Number Register (RO) + * + * Reset value: 0x00U + * + * The flash access segment number register provides the number of program flash + * segments that are available for XACC and SACC permissions. All bits in the + * register are read-only. The contents of this register are loaded during the + * reset sequence. + */ +typedef union _hw_ftfa_facsn +{ + uint8_t U; + struct _hw_ftfa_facsn_bitfields + { + uint8_t NUMSG : 8; /*!< [7:0] Number of Segments Indicator */ + } B; +} hw_ftfa_facsn_t; + +/*! + * @name Constants and macros for entire FTFA_FACSN register + */ +/*@{*/ +#define HW_FTFA_FACSN_ADDR(x) ((x) + 0x2BU) + +#define HW_FTFA_FACSN(x) (*(__I hw_ftfa_facsn_t *) HW_FTFA_FACSN_ADDR(x)) +#define HW_FTFA_FACSN_RD(x) (HW_FTFA_FACSN(x).U) +/*@}*/ + +/* + * Constants & macros for individual FTFA_FACSN bitfields + */ + +/*! + * @name Register FTFA_FACSN, field NUMSG[7:0] (RO) + * + * The NUMSG field indicates the number of equal-sized segments in the program + * flash. + * + * Values: + * - 100000 - Program flash memory is divided into 32 segments (64 Kbytes, 128 + * Kbytes) + * - 101000 - Program flash memory is divided into 40 segments (160 Kbytes) + * - 1000000 - Program flash memory is divided into 64 segments (256 Kbytes, 512 + * Kbytes) + */ +/*@{*/ +#define BP_FTFA_FACSN_NUMSG (0U) /*!< Bit position for FTFA_FACSN_NUMSG. */ +#define BM_FTFA_FACSN_NUMSG (0xFFU) /*!< Bit mask for FTFA_FACSN_NUMSG. */ +#define BS_FTFA_FACSN_NUMSG (8U) /*!< Bit field size in bits for FTFA_FACSN_NUMSG. */ + +/*! @brief Read current value of the FTFA_FACSN_NUMSG field. */ +#define BR_FTFA_FACSN_NUMSG(x) (HW_FTFA_FACSN(x).U) +/*@}*/ + +/******************************************************************************* + * hw_ftfa_t - module struct + ******************************************************************************/ +/*! + * @brief All FTFA module registers. + */ +#pragma pack(1) +typedef struct _hw_ftfa +{ + __IO hw_ftfa_fstat_t FSTAT; /*!< [0x0] Flash Status Register */ + __IO hw_ftfa_fcnfg_t FCNFG; /*!< [0x1] Flash Configuration Register */ + __I hw_ftfa_fsec_t FSEC; /*!< [0x2] Flash Security Register */ + __I hw_ftfa_fopt_t FOPT; /*!< [0x3] Flash Option Register */ + __IO hw_ftfa_fccob3_t FCCOB3; /*!< [0x4] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob2_t FCCOB2; /*!< [0x5] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob1_t FCCOB1; /*!< [0x6] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob0_t FCCOB0; /*!< [0x7] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob7_t FCCOB7; /*!< [0x8] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob6_t FCCOB6; /*!< [0x9] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob5_t FCCOB5; /*!< [0xA] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob4_t FCCOB4; /*!< [0xB] Flash Common Command Object Registers */ + __IO hw_ftfa_fccobb_t FCCOBB; /*!< [0xC] Flash Common Command Object Registers */ + __IO hw_ftfa_fccoba_t FCCOBA; /*!< [0xD] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob9_t FCCOB9; /*!< [0xE] Flash Common Command Object Registers */ + __IO hw_ftfa_fccob8_t FCCOB8; /*!< [0xF] Flash Common Command Object Registers */ + __IO hw_ftfa_fprot3_t FPROT3; /*!< [0x10] Program Flash Protection Registers */ + __IO hw_ftfa_fprot2_t FPROT2; /*!< [0x11] Program Flash Protection Registers */ + __IO hw_ftfa_fprot1_t FPROT1; /*!< [0x12] Program Flash Protection Registers */ + __IO hw_ftfa_fprot0_t FPROT0; /*!< [0x13] Program Flash Protection Registers */ + uint8_t _reserved0[4]; + __I hw_ftfa_xacch3_t XACCH3; /*!< [0x18] Execute-only Access Registers */ + __I hw_ftfa_xacch2_t XACCH2; /*!< [0x19] Execute-only Access Registers */ + __I hw_ftfa_xacch1_t XACCH1; /*!< [0x1A] Execute-only Access Registers */ + __I hw_ftfa_xacch0_t XACCH0; /*!< [0x1B] Execute-only Access Registers */ + __I hw_ftfa_xaccl3_t XACCL3; /*!< [0x1C] Execute-only Access Registers */ + __I hw_ftfa_xaccl2_t XACCL2; /*!< [0x1D] Execute-only Access Registers */ + __I hw_ftfa_xaccl1_t XACCL1; /*!< [0x1E] Execute-only Access Registers */ + __I hw_ftfa_xaccl0_t XACCL0; /*!< [0x1F] Execute-only Access Registers */ + __I hw_ftfa_sacch3_t SACCH3; /*!< [0x20] Supervisor-only Access Registers */ + __I hw_ftfa_sacch2_t SACCH2; /*!< [0x21] Supervisor-only Access Registers */ + __I hw_ftfa_sacch1_t SACCH1; /*!< [0x22] Supervisor-only Access Registers */ + __I hw_ftfa_sacch0_t SACCH0; /*!< [0x23] Supervisor-only Access Registers */ + __I hw_ftfa_saccl3_t SACCL3; /*!< [0x24] Supervisor-only Access Registers */ + __I hw_ftfa_saccl2_t SACCL2; /*!< [0x25] Supervisor-only Access Registers */ + __I hw_ftfa_saccl1_t SACCL1; /*!< [0x26] Supervisor-only Access Registers */ + __I hw_ftfa_saccl0_t SACCL0; /*!< [0x27] Supervisor-only Access Registers */ + __I hw_ftfa_facss_t FACSS; /*!< [0x28] Flash Access Segment Size Register */ + uint8_t _reserved1[2]; + __I hw_ftfa_facsn_t FACSN; /*!< [0x2B] Flash Access Segment Number Register */ +} hw_ftfa_t; +#pragma pack() + +/*! @brief Macro to access all FTFA registers. */ +/*! @param x FTFA module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_FTFA(FTFA_BASE)</code>. */ +#define HW_FTFA(x) (*(hw_ftfa_t *)(x)) + +#endif /* __HW_FTFA_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftm.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftm.h new file mode 100644 index 0000000000..3607a001aa --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_ftm.h @@ -0,0 +1,5936 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_FTM_REGISTERS_H__ +#define __HW_FTM_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 FTM + * + * FlexTimer Module + * + * Registers defined in this header file: + * - HW_FTM_SC - Status And Control + * - HW_FTM_CNT - Counter + * - HW_FTM_MOD - Modulo + * - HW_FTM_CnSC - Channel (n) Status And Control + * - HW_FTM_CnV - Channel (n) Value + * - HW_FTM_CNTIN - Counter Initial Value + * - HW_FTM_STATUS - Capture And Compare Status + * - HW_FTM_MODE - Features Mode Selection + * - HW_FTM_SYNC - Synchronization + * - HW_FTM_OUTINIT - Initial State For Channels Output + * - HW_FTM_OUTMASK - Output Mask + * - HW_FTM_COMBINE - Function For Linked Channels + * - HW_FTM_DEADTIME - Deadtime Insertion Control + * - HW_FTM_EXTTRIG - FTM External Trigger + * - HW_FTM_POL - Channels Polarity + * - HW_FTM_FMS - Fault Mode Status + * - HW_FTM_FILTER - Input Capture Filter Control + * - HW_FTM_FLTCTRL - Fault Control + * - HW_FTM_QDCTRL - Quadrature Decoder Control And Status + * - HW_FTM_CONF - Configuration + * - HW_FTM_FLTPOL - FTM Fault Input Polarity + * - HW_FTM_SYNCONF - Synchronization Configuration + * - HW_FTM_INVCTRL - FTM Inverting Control + * - HW_FTM_SWOCTRL - FTM Software Output Control + * - HW_FTM_PWMLOAD - FTM PWM Load + * + * - hw_ftm_t - Struct containing all module registers. + */ + +#define HW_FTM_INSTANCE_COUNT (4U) /*!< Number of instances of the FTM module. */ +#define HW_FTM0 (0U) /*!< Instance number for FTM0. */ +#define HW_FTM1 (1U) /*!< Instance number for FTM1. */ +#define HW_FTM2 (2U) /*!< Instance number for FTM2. */ +#define HW_FTM3 (3U) /*!< Instance number for FTM3. */ + +/******************************************************************************* + * HW_FTM_SC - Status And Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_SC - Status And Control (RW) + * + * Reset value: 0x00000000U + * + * SC contains the overflow status flag and control bits used to configure the + * interrupt enable, FTM configuration, clock source, and prescaler factor. These + * controls relate to all channels within this module. + */ +typedef union _hw_ftm_sc +{ + uint32_t U; + struct _hw_ftm_sc_bitfields + { + uint32_t PS : 3; /*!< [2:0] Prescale Factor Selection */ + uint32_t CLKS : 2; /*!< [4:3] Clock Source Selection */ + uint32_t CPWMS : 1; /*!< [5] Center-Aligned PWM Select */ + uint32_t TOIE : 1; /*!< [6] Timer Overflow Interrupt Enable */ + uint32_t TOF : 1; /*!< [7] Timer Overflow Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_sc_t; + +/*! + * @name Constants and macros for entire FTM_SC register + */ +/*@{*/ +#define HW_FTM_SC_ADDR(x) ((x) + 0x0U) + +#define HW_FTM_SC(x) (*(__IO hw_ftm_sc_t *) HW_FTM_SC_ADDR(x)) +#define HW_FTM_SC_RD(x) (HW_FTM_SC(x).U) +#define HW_FTM_SC_WR(x, v) (HW_FTM_SC(x).U = (v)) +#define HW_FTM_SC_SET(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) | (v))) +#define HW_FTM_SC_CLR(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) & ~(v))) +#define HW_FTM_SC_TOG(x, v) (HW_FTM_SC_WR(x, HW_FTM_SC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_SC bitfields + */ + +/*! + * @name Register FTM_SC, field PS[2:0] (RW) + * + * Selects one of 8 division factors for the clock source selected by CLKS. The + * new prescaler factor affects the clock source on the next system clock cycle + * after the new value is updated into the register bits. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 000 - Divide by 1 + * - 001 - Divide by 2 + * - 010 - Divide by 4 + * - 011 - Divide by 8 + * - 100 - Divide by 16 + * - 101 - Divide by 32 + * - 110 - Divide by 64 + * - 111 - Divide by 128 + */ +/*@{*/ +#define BP_FTM_SC_PS (0U) /*!< Bit position for FTM_SC_PS. */ +#define BM_FTM_SC_PS (0x00000007U) /*!< Bit mask for FTM_SC_PS. */ +#define BS_FTM_SC_PS (3U) /*!< Bit field size in bits for FTM_SC_PS. */ + +/*! @brief Read current value of the FTM_SC_PS field. */ +#define BR_FTM_SC_PS(x) (HW_FTM_SC(x).B.PS) + +/*! @brief Format value for bitfield FTM_SC_PS. */ +#define BF_FTM_SC_PS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SC_PS) & BM_FTM_SC_PS) + +/*! @brief Set the PS field to a new value. */ +#define BW_FTM_SC_PS(x, v) (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_PS) | BF_FTM_SC_PS(v))) +/*@}*/ + +/*! + * @name Register FTM_SC, field CLKS[4:3] (RW) + * + * Selects one of the three FTM counter clock sources. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 00 - No clock selected. This in effect disables the FTM counter. + * - 01 - System clock + * - 10 - Fixed frequency clock + * - 11 - External clock + */ +/*@{*/ +#define BP_FTM_SC_CLKS (3U) /*!< Bit position for FTM_SC_CLKS. */ +#define BM_FTM_SC_CLKS (0x00000018U) /*!< Bit mask for FTM_SC_CLKS. */ +#define BS_FTM_SC_CLKS (2U) /*!< Bit field size in bits for FTM_SC_CLKS. */ + +/*! @brief Read current value of the FTM_SC_CLKS field. */ +#define BR_FTM_SC_CLKS(x) (HW_FTM_SC(x).B.CLKS) + +/*! @brief Format value for bitfield FTM_SC_CLKS. */ +#define BF_FTM_SC_CLKS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SC_CLKS) & BM_FTM_SC_CLKS) + +/*! @brief Set the CLKS field to a new value. */ +#define BW_FTM_SC_CLKS(x, v) (HW_FTM_SC_WR(x, (HW_FTM_SC_RD(x) & ~BM_FTM_SC_CLKS) | BF_FTM_SC_CLKS(v))) +/*@}*/ + +/*! + * @name Register FTM_SC, field CPWMS[5] (RW) + * + * Selects CPWM mode. This mode configures the FTM to operate in Up-Down + * Counting mode. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + * + * Values: + * - 0 - FTM counter operates in Up Counting mode. + * - 1 - FTM counter operates in Up-Down Counting mode. + */ +/*@{*/ +#define BP_FTM_SC_CPWMS (5U) /*!< Bit position for FTM_SC_CPWMS. */ +#define BM_FTM_SC_CPWMS (0x00000020U) /*!< Bit mask for FTM_SC_CPWMS. */ +#define BS_FTM_SC_CPWMS (1U) /*!< Bit field size in bits for FTM_SC_CPWMS. */ + +/*! @brief Read current value of the FTM_SC_CPWMS field. */ +#define BR_FTM_SC_CPWMS(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS)) + +/*! @brief Format value for bitfield FTM_SC_CPWMS. */ +#define BF_FTM_SC_CPWMS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SC_CPWMS) & BM_FTM_SC_CPWMS) + +/*! @brief Set the CPWMS field to a new value. */ +#define BW_FTM_SC_CPWMS(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_CPWMS) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SC, field TOIE[6] (RW) + * + * Enables FTM overflow interrupts. + * + * Values: + * - 0 - Disable TOF interrupts. Use software polling. + * - 1 - Enable TOF interrupts. An interrupt is generated when TOF equals one. + */ +/*@{*/ +#define BP_FTM_SC_TOIE (6U) /*!< Bit position for FTM_SC_TOIE. */ +#define BM_FTM_SC_TOIE (0x00000040U) /*!< Bit mask for FTM_SC_TOIE. */ +#define BS_FTM_SC_TOIE (1U) /*!< Bit field size in bits for FTM_SC_TOIE. */ + +/*! @brief Read current value of the FTM_SC_TOIE field. */ +#define BR_FTM_SC_TOIE(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE)) + +/*! @brief Format value for bitfield FTM_SC_TOIE. */ +#define BF_FTM_SC_TOIE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SC_TOIE) & BM_FTM_SC_TOIE) + +/*! @brief Set the TOIE field to a new value. */ +#define BW_FTM_SC_TOIE(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOIE) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SC, field TOF[7] (ROWZ) + * + * Set by hardware when the FTM counter passes the value in the MOD register. + * The TOF bit is cleared by reading the SC register while TOF is set and then + * writing a 0 to TOF bit. Writing a 1 to TOF has no effect. If another FTM overflow + * occurs between the read and write operations, the write operation has no + * effect; therefore, TOF remains set indicating an overflow has occurred. In this + * case, a TOF interrupt request is not lost due to the clearing sequence for a + * previous TOF. + * + * Values: + * - 0 - FTM counter has not overflowed. + * - 1 - FTM counter has overflowed. + */ +/*@{*/ +#define BP_FTM_SC_TOF (7U) /*!< Bit position for FTM_SC_TOF. */ +#define BM_FTM_SC_TOF (0x00000080U) /*!< Bit mask for FTM_SC_TOF. */ +#define BS_FTM_SC_TOF (1U) /*!< Bit field size in bits for FTM_SC_TOF. */ + +/*! @brief Read current value of the FTM_SC_TOF field. */ +#define BR_FTM_SC_TOF(x) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOF)) + +/*! @brief Format value for bitfield FTM_SC_TOF. */ +#define BF_FTM_SC_TOF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SC_TOF) & BM_FTM_SC_TOF) + +/*! @brief Set the TOF field to a new value. */ +#define BW_FTM_SC_TOF(x, v) (BITBAND_ACCESS32(HW_FTM_SC_ADDR(x), BP_FTM_SC_TOF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_CNT - Counter + ******************************************************************************/ + +/*! + * @brief HW_FTM_CNT - Counter (RW) + * + * Reset value: 0x00000000U + * + * The CNT register contains the FTM counter value. Reset clears the CNT + * register. Writing any value to COUNT updates the counter with its initial value, + * CNTIN. When BDM is active, the FTM counter is frozen. This is the value that you + * may read. + */ +typedef union _hw_ftm_cnt +{ + uint32_t U; + struct _hw_ftm_cnt_bitfields + { + uint32_t COUNT : 16; /*!< [15:0] Counter Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_cnt_t; + +/*! + * @name Constants and macros for entire FTM_CNT register + */ +/*@{*/ +#define HW_FTM_CNT_ADDR(x) ((x) + 0x4U) + +#define HW_FTM_CNT(x) (*(__IO hw_ftm_cnt_t *) HW_FTM_CNT_ADDR(x)) +#define HW_FTM_CNT_RD(x) (HW_FTM_CNT(x).U) +#define HW_FTM_CNT_WR(x, v) (HW_FTM_CNT(x).U = (v)) +#define HW_FTM_CNT_SET(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) | (v))) +#define HW_FTM_CNT_CLR(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) & ~(v))) +#define HW_FTM_CNT_TOG(x, v) (HW_FTM_CNT_WR(x, HW_FTM_CNT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_CNT bitfields + */ + +/*! + * @name Register FTM_CNT, field COUNT[15:0] (RW) + */ +/*@{*/ +#define BP_FTM_CNT_COUNT (0U) /*!< Bit position for FTM_CNT_COUNT. */ +#define BM_FTM_CNT_COUNT (0x0000FFFFU) /*!< Bit mask for FTM_CNT_COUNT. */ +#define BS_FTM_CNT_COUNT (16U) /*!< Bit field size in bits for FTM_CNT_COUNT. */ + +/*! @brief Read current value of the FTM_CNT_COUNT field. */ +#define BR_FTM_CNT_COUNT(x) (HW_FTM_CNT(x).B.COUNT) + +/*! @brief Format value for bitfield FTM_CNT_COUNT. */ +#define BF_FTM_CNT_COUNT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CNT_COUNT) & BM_FTM_CNT_COUNT) + +/*! @brief Set the COUNT field to a new value. */ +#define BW_FTM_CNT_COUNT(x, v) (HW_FTM_CNT_WR(x, (HW_FTM_CNT_RD(x) & ~BM_FTM_CNT_COUNT) | BF_FTM_CNT_COUNT(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_MOD - Modulo + ******************************************************************************/ + +/*! + * @brief HW_FTM_MOD - Modulo (RW) + * + * Reset value: 0x00000000U + * + * The Modulo register contains the modulo value for the FTM counter. After the + * FTM counter reaches the modulo value, the overflow flag (TOF) becomes set at + * the next clock, and the next value of FTM counter depends on the selected + * counting method; see Counter. Writing to the MOD register latches the value into a + * buffer. The MOD register is updated with the value of its write buffer + * according to Registers updated from write buffers. If FTMEN = 0, this write coherency + * mechanism may be manually reset by writing to the SC register whether BDM is + * active or not. Initialize the FTM counter, by writing to CNT, before writing + * to the MOD register to avoid confusion about when the first counter overflow + * will occur. + */ +typedef union _hw_ftm_mod +{ + uint32_t U; + struct _hw_ftm_mod_bitfields + { + uint32_t MOD : 16; /*!< [15:0] */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_mod_t; + +/*! + * @name Constants and macros for entire FTM_MOD register + */ +/*@{*/ +#define HW_FTM_MOD_ADDR(x) ((x) + 0x8U) + +#define HW_FTM_MOD(x) (*(__IO hw_ftm_mod_t *) HW_FTM_MOD_ADDR(x)) +#define HW_FTM_MOD_RD(x) (HW_FTM_MOD(x).U) +#define HW_FTM_MOD_WR(x, v) (HW_FTM_MOD(x).U = (v)) +#define HW_FTM_MOD_SET(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) | (v))) +#define HW_FTM_MOD_CLR(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) & ~(v))) +#define HW_FTM_MOD_TOG(x, v) (HW_FTM_MOD_WR(x, HW_FTM_MOD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_MOD bitfields + */ + +/*! + * @name Register FTM_MOD, field MOD[15:0] (RW) + * + * Modulo Value + */ +/*@{*/ +#define BP_FTM_MOD_MOD (0U) /*!< Bit position for FTM_MOD_MOD. */ +#define BM_FTM_MOD_MOD (0x0000FFFFU) /*!< Bit mask for FTM_MOD_MOD. */ +#define BS_FTM_MOD_MOD (16U) /*!< Bit field size in bits for FTM_MOD_MOD. */ + +/*! @brief Read current value of the FTM_MOD_MOD field. */ +#define BR_FTM_MOD_MOD(x) (HW_FTM_MOD(x).B.MOD) + +/*! @brief Format value for bitfield FTM_MOD_MOD. */ +#define BF_FTM_MOD_MOD(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MOD_MOD) & BM_FTM_MOD_MOD) + +/*! @brief Set the MOD field to a new value. */ +#define BW_FTM_MOD_MOD(x, v) (HW_FTM_MOD_WR(x, (HW_FTM_MOD_RD(x) & ~BM_FTM_MOD_MOD) | BF_FTM_MOD_MOD(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_CnSC - Channel (n) Status And Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_CnSC - Channel (n) Status And Control (RW) + * + * Reset value: 0x00000000U + * + * CnSC contains the channel-interrupt-status flag and control bits used to + * configure the interrupt enable, channel configuration, and pin function. Mode, + * edge, and level selection DECAPEN COMBINE CPWMS MSnB:MSnA ELSnB:ELSnA Mode + * Configuration X X X XX 0 Pin not used for FTM-revert the channel pin to general + * purpose I/O or other peripheral control 0 0 0 0 1 Input Capture Capture on Rising + * Edge Only 10 Capture on Falling Edge Only 11 Capture on Rising or Falling Edge + * 1 1 Output Compare Toggle Output on match 10 Clear Output on match 11 Set + * Output on match 1X 10 Edge-Aligned PWM High-true pulses (clear Output on match) + * X1 Low-true pulses (set Output on match) 1 XX 10 Center-Aligned PWM High-true + * pulses (clear Output on match-up) X1 Low-true pulses (set Output on match-up) 1 + * 0 XX 10 Combine PWM High-true pulses (set on channel (n) match, and clear on + * channel (n+1) match) X1 Low-true pulses (clear on channel (n) match, and set + * on channel (n+1) match) 1 0 0 X0 See the following table (#ModeSel2Table). Dual + * Edge Capture One-Shot Capture mode X1 Continuous Capture mode Dual Edge + * Capture mode - edge polarity selection ELSnB ELSnA Channel Port Enable Detected + * Edges 0 0 Disabled No edge 0 1 Enabled Rising edge 1 0 Enabled Falling edge 1 1 + * Enabled Rising and falling edges + */ +typedef union _hw_ftm_cnsc +{ + uint32_t U; + struct _hw_ftm_cnsc_bitfields + { + uint32_t DMA : 1; /*!< [0] DMA Enable */ + uint32_t ICRST : 1; /*!< [1] FTM counter reset by the selected input + * capture event. */ + uint32_t ELSA : 1; /*!< [2] Edge or Level Select */ + uint32_t ELSB : 1; /*!< [3] Edge or Level Select */ + uint32_t MSA : 1; /*!< [4] Channel Mode Select */ + uint32_t MSB : 1; /*!< [5] Channel Mode Select */ + uint32_t CHIE : 1; /*!< [6] Channel Interrupt Enable */ + uint32_t CHF : 1; /*!< [7] Channel Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_cnsc_t; + +/*! + * @name Constants and macros for entire FTM_CnSC register + */ +/*@{*/ +#define HW_FTM_CnSC_COUNT (8U) + +#define HW_FTM_CnSC_ADDR(x, n) ((x) + 0xCU + (0x8U * (n))) + +#define HW_FTM_CnSC(x, n) (*(__IO hw_ftm_cnsc_t *) HW_FTM_CnSC_ADDR(x, n)) +#define HW_FTM_CnSC_RD(x, n) (HW_FTM_CnSC(x, n).U) +#define HW_FTM_CnSC_WR(x, n, v) (HW_FTM_CnSC(x, n).U = (v)) +#define HW_FTM_CnSC_SET(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) | (v))) +#define HW_FTM_CnSC_CLR(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) & ~(v))) +#define HW_FTM_CnSC_TOG(x, n, v) (HW_FTM_CnSC_WR(x, n, HW_FTM_CnSC_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_CnSC bitfields + */ + +/*! + * @name Register FTM_CnSC, field DMA[0] (RW) + * + * Enables DMA transfers for the channel. + * + * Values: + * - 0 - Disable DMA transfers. + * - 1 - Enable DMA transfers. + */ +/*@{*/ +#define BP_FTM_CnSC_DMA (0U) /*!< Bit position for FTM_CnSC_DMA. */ +#define BM_FTM_CnSC_DMA (0x00000001U) /*!< Bit mask for FTM_CnSC_DMA. */ +#define BS_FTM_CnSC_DMA (1U) /*!< Bit field size in bits for FTM_CnSC_DMA. */ + +/*! @brief Read current value of the FTM_CnSC_DMA field. */ +#define BR_FTM_CnSC_DMA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA)) + +/*! @brief Format value for bitfield FTM_CnSC_DMA. */ +#define BF_FTM_CnSC_DMA(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_DMA) & BM_FTM_CnSC_DMA) + +/*! @brief Set the DMA field to a new value. */ +#define BW_FTM_CnSC_DMA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_DMA) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field ICRST[1] (RW) + * + * FTM counter reset is driven by the selected event of the channel (n) in the + * Input Capture mode. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - FTM counter is not reset when the selected channel (n) input event is + * detected. + * - 1 - FTM counter is reset when the selected channel (n) input event is + * detected. + */ +/*@{*/ +#define BP_FTM_CnSC_ICRST (1U) /*!< Bit position for FTM_CnSC_ICRST. */ +#define BM_FTM_CnSC_ICRST (0x00000002U) /*!< Bit mask for FTM_CnSC_ICRST. */ +#define BS_FTM_CnSC_ICRST (1U) /*!< Bit field size in bits for FTM_CnSC_ICRST. */ + +/*! @brief Read current value of the FTM_CnSC_ICRST field. */ +#define BR_FTM_CnSC_ICRST(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ICRST)) + +/*! @brief Format value for bitfield FTM_CnSC_ICRST. */ +#define BF_FTM_CnSC_ICRST(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_ICRST) & BM_FTM_CnSC_ICRST) + +/*! @brief Set the ICRST field to a new value. */ +#define BW_FTM_CnSC_ICRST(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ICRST) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field ELSA[2] (RW) + * + * The functionality of ELSB and ELSA depends on the channel mode. See + * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + */ +/*@{*/ +#define BP_FTM_CnSC_ELSA (2U) /*!< Bit position for FTM_CnSC_ELSA. */ +#define BM_FTM_CnSC_ELSA (0x00000004U) /*!< Bit mask for FTM_CnSC_ELSA. */ +#define BS_FTM_CnSC_ELSA (1U) /*!< Bit field size in bits for FTM_CnSC_ELSA. */ + +/*! @brief Read current value of the FTM_CnSC_ELSA field. */ +#define BR_FTM_CnSC_ELSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA)) + +/*! @brief Format value for bitfield FTM_CnSC_ELSA. */ +#define BF_FTM_CnSC_ELSA(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_ELSA) & BM_FTM_CnSC_ELSA) + +/*! @brief Set the ELSA field to a new value. */ +#define BW_FTM_CnSC_ELSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSA) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field ELSB[3] (RW) + * + * The functionality of ELSB and ELSA depends on the channel mode. See + * #ModeSel1Table. This field is write protected. It can be written only when MODE[WPDIS] + * = 1. + */ +/*@{*/ +#define BP_FTM_CnSC_ELSB (3U) /*!< Bit position for FTM_CnSC_ELSB. */ +#define BM_FTM_CnSC_ELSB (0x00000008U) /*!< Bit mask for FTM_CnSC_ELSB. */ +#define BS_FTM_CnSC_ELSB (1U) /*!< Bit field size in bits for FTM_CnSC_ELSB. */ + +/*! @brief Read current value of the FTM_CnSC_ELSB field. */ +#define BR_FTM_CnSC_ELSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB)) + +/*! @brief Format value for bitfield FTM_CnSC_ELSB. */ +#define BF_FTM_CnSC_ELSB(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_ELSB) & BM_FTM_CnSC_ELSB) + +/*! @brief Set the ELSB field to a new value. */ +#define BW_FTM_CnSC_ELSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_ELSB) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field MSA[4] (RW) + * + * Used for further selections in the channel logic. Its functionality is + * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + */ +/*@{*/ +#define BP_FTM_CnSC_MSA (4U) /*!< Bit position for FTM_CnSC_MSA. */ +#define BM_FTM_CnSC_MSA (0x00000010U) /*!< Bit mask for FTM_CnSC_MSA. */ +#define BS_FTM_CnSC_MSA (1U) /*!< Bit field size in bits for FTM_CnSC_MSA. */ + +/*! @brief Read current value of the FTM_CnSC_MSA field. */ +#define BR_FTM_CnSC_MSA(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA)) + +/*! @brief Format value for bitfield FTM_CnSC_MSA. */ +#define BF_FTM_CnSC_MSA(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_MSA) & BM_FTM_CnSC_MSA) + +/*! @brief Set the MSA field to a new value. */ +#define BW_FTM_CnSC_MSA(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSA) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field MSB[5] (RW) + * + * Used for further selections in the channel logic. Its functionality is + * dependent on the channel mode. See #ModeSel1Table. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + */ +/*@{*/ +#define BP_FTM_CnSC_MSB (5U) /*!< Bit position for FTM_CnSC_MSB. */ +#define BM_FTM_CnSC_MSB (0x00000020U) /*!< Bit mask for FTM_CnSC_MSB. */ +#define BS_FTM_CnSC_MSB (1U) /*!< Bit field size in bits for FTM_CnSC_MSB. */ + +/*! @brief Read current value of the FTM_CnSC_MSB field. */ +#define BR_FTM_CnSC_MSB(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB)) + +/*! @brief Format value for bitfield FTM_CnSC_MSB. */ +#define BF_FTM_CnSC_MSB(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_MSB) & BM_FTM_CnSC_MSB) + +/*! @brief Set the MSB field to a new value. */ +#define BW_FTM_CnSC_MSB(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_MSB) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field CHIE[6] (RW) + * + * Enables channel interrupts. + * + * Values: + * - 0 - Disable channel interrupts. Use software polling. + * - 1 - Enable channel interrupts. + */ +/*@{*/ +#define BP_FTM_CnSC_CHIE (6U) /*!< Bit position for FTM_CnSC_CHIE. */ +#define BM_FTM_CnSC_CHIE (0x00000040U) /*!< Bit mask for FTM_CnSC_CHIE. */ +#define BS_FTM_CnSC_CHIE (1U) /*!< Bit field size in bits for FTM_CnSC_CHIE. */ + +/*! @brief Read current value of the FTM_CnSC_CHIE field. */ +#define BR_FTM_CnSC_CHIE(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE)) + +/*! @brief Format value for bitfield FTM_CnSC_CHIE. */ +#define BF_FTM_CnSC_CHIE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_CHIE) & BM_FTM_CnSC_CHIE) + +/*! @brief Set the CHIE field to a new value. */ +#define BW_FTM_CnSC_CHIE(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHIE) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CnSC, field CHF[7] (ROWZ) + * + * Set by hardware when an event occurs on the channel. CHF is cleared by + * reading the CSC register while CHnF is set and then writing a 0 to the CHF bit. + * Writing a 1 to CHF has no effect. If another event occurs between the read and + * write operations, the write operation has no effect; therefore, CHF remains set + * indicating an event has occurred. In this case a CHF interrupt request is not + * lost due to the clearing sequence for a previous CHF. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_CnSC_CHF (7U) /*!< Bit position for FTM_CnSC_CHF. */ +#define BM_FTM_CnSC_CHF (0x00000080U) /*!< Bit mask for FTM_CnSC_CHF. */ +#define BS_FTM_CnSC_CHF (1U) /*!< Bit field size in bits for FTM_CnSC_CHF. */ + +/*! @brief Read current value of the FTM_CnSC_CHF field. */ +#define BR_FTM_CnSC_CHF(x, n) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHF)) + +/*! @brief Format value for bitfield FTM_CnSC_CHF. */ +#define BF_FTM_CnSC_CHF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnSC_CHF) & BM_FTM_CnSC_CHF) + +/*! @brief Set the CHF field to a new value. */ +#define BW_FTM_CnSC_CHF(x, n, v) (BITBAND_ACCESS32(HW_FTM_CnSC_ADDR(x, n), BP_FTM_CnSC_CHF) = (v)) +/*@}*/ +/******************************************************************************* + * HW_FTM_CnV - Channel (n) Value + ******************************************************************************/ + +/*! + * @brief HW_FTM_CnV - Channel (n) Value (RW) + * + * Reset value: 0x00000000U + * + * These registers contain the captured FTM counter value for the input modes or + * the match value for the output modes. In Input Capture, Capture Test, and + * Dual Edge Capture modes, any write to a CnV register is ignored. In output modes, + * writing to a CnV register latches the value into a buffer. A CnV register is + * updated with the value of its write buffer according to Registers updated from + * write buffers. If FTMEN = 0, this write coherency mechanism may be manually + * reset by writing to the CnSC register whether BDM mode is active or not. + */ +typedef union _hw_ftm_cnv +{ + uint32_t U; + struct _hw_ftm_cnv_bitfields + { + uint32_t VAL : 16; /*!< [15:0] Channel Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_cnv_t; + +/*! + * @name Constants and macros for entire FTM_CnV register + */ +/*@{*/ +#define HW_FTM_CnV_COUNT (8U) + +#define HW_FTM_CnV_ADDR(x, n) ((x) + 0x10U + (0x8U * (n))) + +#define HW_FTM_CnV(x, n) (*(__IO hw_ftm_cnv_t *) HW_FTM_CnV_ADDR(x, n)) +#define HW_FTM_CnV_RD(x, n) (HW_FTM_CnV(x, n).U) +#define HW_FTM_CnV_WR(x, n, v) (HW_FTM_CnV(x, n).U = (v)) +#define HW_FTM_CnV_SET(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) | (v))) +#define HW_FTM_CnV_CLR(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) & ~(v))) +#define HW_FTM_CnV_TOG(x, n, v) (HW_FTM_CnV_WR(x, n, HW_FTM_CnV_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_CnV bitfields + */ + +/*! + * @name Register FTM_CnV, field VAL[15:0] (RW) + * + * Captured FTM counter value of the input modes or the match value for the + * output modes + */ +/*@{*/ +#define BP_FTM_CnV_VAL (0U) /*!< Bit position for FTM_CnV_VAL. */ +#define BM_FTM_CnV_VAL (0x0000FFFFU) /*!< Bit mask for FTM_CnV_VAL. */ +#define BS_FTM_CnV_VAL (16U) /*!< Bit field size in bits for FTM_CnV_VAL. */ + +/*! @brief Read current value of the FTM_CnV_VAL field. */ +#define BR_FTM_CnV_VAL(x, n) (HW_FTM_CnV(x, n).B.VAL) + +/*! @brief Format value for bitfield FTM_CnV_VAL. */ +#define BF_FTM_CnV_VAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CnV_VAL) & BM_FTM_CnV_VAL) + +/*! @brief Set the VAL field to a new value. */ +#define BW_FTM_CnV_VAL(x, n, v) (HW_FTM_CnV_WR(x, n, (HW_FTM_CnV_RD(x, n) & ~BM_FTM_CnV_VAL) | BF_FTM_CnV_VAL(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_CNTIN - Counter Initial Value + ******************************************************************************/ + +/*! + * @brief HW_FTM_CNTIN - Counter Initial Value (RW) + * + * Reset value: 0x00000000U + * + * The Counter Initial Value register contains the initial value for the FTM + * counter. Writing to the CNTIN register latches the value into a buffer. The CNTIN + * register is updated with the value of its write buffer according to Registers + * updated from write buffers. When the FTM clock is initially selected, by + * writing a non-zero value to the CLKS bits, the FTM counter starts with the value + * 0x0000. To avoid this behavior, before the first write to select the FTM clock, + * write the new value to the the CNTIN register and then initialize the FTM + * counter by writing any value to the CNT register. + */ +typedef union _hw_ftm_cntin +{ + uint32_t U; + struct _hw_ftm_cntin_bitfields + { + uint32_t INIT : 16; /*!< [15:0] */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_cntin_t; + +/*! + * @name Constants and macros for entire FTM_CNTIN register + */ +/*@{*/ +#define HW_FTM_CNTIN_ADDR(x) ((x) + 0x4CU) + +#define HW_FTM_CNTIN(x) (*(__IO hw_ftm_cntin_t *) HW_FTM_CNTIN_ADDR(x)) +#define HW_FTM_CNTIN_RD(x) (HW_FTM_CNTIN(x).U) +#define HW_FTM_CNTIN_WR(x, v) (HW_FTM_CNTIN(x).U = (v)) +#define HW_FTM_CNTIN_SET(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) | (v))) +#define HW_FTM_CNTIN_CLR(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) & ~(v))) +#define HW_FTM_CNTIN_TOG(x, v) (HW_FTM_CNTIN_WR(x, HW_FTM_CNTIN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_CNTIN bitfields + */ + +/*! + * @name Register FTM_CNTIN, field INIT[15:0] (RW) + * + * Initial Value Of The FTM Counter + */ +/*@{*/ +#define BP_FTM_CNTIN_INIT (0U) /*!< Bit position for FTM_CNTIN_INIT. */ +#define BM_FTM_CNTIN_INIT (0x0000FFFFU) /*!< Bit mask for FTM_CNTIN_INIT. */ +#define BS_FTM_CNTIN_INIT (16U) /*!< Bit field size in bits for FTM_CNTIN_INIT. */ + +/*! @brief Read current value of the FTM_CNTIN_INIT field. */ +#define BR_FTM_CNTIN_INIT(x) (HW_FTM_CNTIN(x).B.INIT) + +/*! @brief Format value for bitfield FTM_CNTIN_INIT. */ +#define BF_FTM_CNTIN_INIT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CNTIN_INIT) & BM_FTM_CNTIN_INIT) + +/*! @brief Set the INIT field to a new value. */ +#define BW_FTM_CNTIN_INIT(x, v) (HW_FTM_CNTIN_WR(x, (HW_FTM_CNTIN_RD(x) & ~BM_FTM_CNTIN_INIT) | BF_FTM_CNTIN_INIT(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_STATUS - Capture And Compare Status + ******************************************************************************/ + +/*! + * @brief HW_FTM_STATUS - Capture And Compare Status (RW) + * + * Reset value: 0x00000000U + * + * The STATUS register contains a copy of the status flag CHnF bit in CnSC for + * each FTM channel for software convenience. Each CHnF bit in STATUS is a mirror + * of CHnF bit in CnSC. All CHnF bits can be checked using only one read of + * STATUS. All CHnF bits can be cleared by reading STATUS followed by writing 0x00 to + * STATUS. Hardware sets the individual channel flags when an event occurs on the + * channel. CHnF is cleared by reading STATUS while CHnF is set and then writing + * a 0 to the CHnF bit. Writing a 1 to CHnF has no effect. If another event + * occurs between the read and write operations, the write operation has no effect; + * therefore, CHnF remains set indicating an event has occurred. In this case, a + * CHnF interrupt request is not lost due to the clearing sequence for a previous + * CHnF. The STATUS register should be used only in Combine mode. + */ +typedef union _hw_ftm_status +{ + uint32_t U; + struct _hw_ftm_status_bitfields + { + uint32_t CH0F : 1; /*!< [0] Channel 0 Flag */ + uint32_t CH1F : 1; /*!< [1] Channel 1 Flag */ + uint32_t CH2F : 1; /*!< [2] Channel 2 Flag */ + uint32_t CH3F : 1; /*!< [3] Channel 3 Flag */ + uint32_t CH4F : 1; /*!< [4] Channel 4 Flag */ + uint32_t CH5F : 1; /*!< [5] Channel 5 Flag */ + uint32_t CH6F : 1; /*!< [6] Channel 6 Flag */ + uint32_t CH7F : 1; /*!< [7] Channel 7 Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_status_t; + +/*! + * @name Constants and macros for entire FTM_STATUS register + */ +/*@{*/ +#define HW_FTM_STATUS_ADDR(x) ((x) + 0x50U) + +#define HW_FTM_STATUS(x) (*(__IO hw_ftm_status_t *) HW_FTM_STATUS_ADDR(x)) +#define HW_FTM_STATUS_RD(x) (HW_FTM_STATUS(x).U) +#define HW_FTM_STATUS_WR(x, v) (HW_FTM_STATUS(x).U = (v)) +#define HW_FTM_STATUS_SET(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) | (v))) +#define HW_FTM_STATUS_CLR(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) & ~(v))) +#define HW_FTM_STATUS_TOG(x, v) (HW_FTM_STATUS_WR(x, HW_FTM_STATUS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_STATUS bitfields + */ + +/*! + * @name Register FTM_STATUS, field CH0F[0] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH0F (0U) /*!< Bit position for FTM_STATUS_CH0F. */ +#define BM_FTM_STATUS_CH0F (0x00000001U) /*!< Bit mask for FTM_STATUS_CH0F. */ +#define BS_FTM_STATUS_CH0F (1U) /*!< Bit field size in bits for FTM_STATUS_CH0F. */ + +/*! @brief Read current value of the FTM_STATUS_CH0F field. */ +#define BR_FTM_STATUS_CH0F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH0F. */ +#define BF_FTM_STATUS_CH0F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH0F) & BM_FTM_STATUS_CH0F) + +/*! @brief Set the CH0F field to a new value. */ +#define BW_FTM_STATUS_CH0F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH0F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH1F[1] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH1F (1U) /*!< Bit position for FTM_STATUS_CH1F. */ +#define BM_FTM_STATUS_CH1F (0x00000002U) /*!< Bit mask for FTM_STATUS_CH1F. */ +#define BS_FTM_STATUS_CH1F (1U) /*!< Bit field size in bits for FTM_STATUS_CH1F. */ + +/*! @brief Read current value of the FTM_STATUS_CH1F field. */ +#define BR_FTM_STATUS_CH1F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH1F. */ +#define BF_FTM_STATUS_CH1F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH1F) & BM_FTM_STATUS_CH1F) + +/*! @brief Set the CH1F field to a new value. */ +#define BW_FTM_STATUS_CH1F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH1F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH2F[2] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH2F (2U) /*!< Bit position for FTM_STATUS_CH2F. */ +#define BM_FTM_STATUS_CH2F (0x00000004U) /*!< Bit mask for FTM_STATUS_CH2F. */ +#define BS_FTM_STATUS_CH2F (1U) /*!< Bit field size in bits for FTM_STATUS_CH2F. */ + +/*! @brief Read current value of the FTM_STATUS_CH2F field. */ +#define BR_FTM_STATUS_CH2F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH2F. */ +#define BF_FTM_STATUS_CH2F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH2F) & BM_FTM_STATUS_CH2F) + +/*! @brief Set the CH2F field to a new value. */ +#define BW_FTM_STATUS_CH2F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH2F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH3F[3] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH3F (3U) /*!< Bit position for FTM_STATUS_CH3F. */ +#define BM_FTM_STATUS_CH3F (0x00000008U) /*!< Bit mask for FTM_STATUS_CH3F. */ +#define BS_FTM_STATUS_CH3F (1U) /*!< Bit field size in bits for FTM_STATUS_CH3F. */ + +/*! @brief Read current value of the FTM_STATUS_CH3F field. */ +#define BR_FTM_STATUS_CH3F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH3F. */ +#define BF_FTM_STATUS_CH3F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH3F) & BM_FTM_STATUS_CH3F) + +/*! @brief Set the CH3F field to a new value. */ +#define BW_FTM_STATUS_CH3F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH3F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH4F[4] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH4F (4U) /*!< Bit position for FTM_STATUS_CH4F. */ +#define BM_FTM_STATUS_CH4F (0x00000010U) /*!< Bit mask for FTM_STATUS_CH4F. */ +#define BS_FTM_STATUS_CH4F (1U) /*!< Bit field size in bits for FTM_STATUS_CH4F. */ + +/*! @brief Read current value of the FTM_STATUS_CH4F field. */ +#define BR_FTM_STATUS_CH4F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH4F. */ +#define BF_FTM_STATUS_CH4F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH4F) & BM_FTM_STATUS_CH4F) + +/*! @brief Set the CH4F field to a new value. */ +#define BW_FTM_STATUS_CH4F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH4F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH5F[5] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH5F (5U) /*!< Bit position for FTM_STATUS_CH5F. */ +#define BM_FTM_STATUS_CH5F (0x00000020U) /*!< Bit mask for FTM_STATUS_CH5F. */ +#define BS_FTM_STATUS_CH5F (1U) /*!< Bit field size in bits for FTM_STATUS_CH5F. */ + +/*! @brief Read current value of the FTM_STATUS_CH5F field. */ +#define BR_FTM_STATUS_CH5F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH5F. */ +#define BF_FTM_STATUS_CH5F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH5F) & BM_FTM_STATUS_CH5F) + +/*! @brief Set the CH5F field to a new value. */ +#define BW_FTM_STATUS_CH5F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH5F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH6F[6] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH6F (6U) /*!< Bit position for FTM_STATUS_CH6F. */ +#define BM_FTM_STATUS_CH6F (0x00000040U) /*!< Bit mask for FTM_STATUS_CH6F. */ +#define BS_FTM_STATUS_CH6F (1U) /*!< Bit field size in bits for FTM_STATUS_CH6F. */ + +/*! @brief Read current value of the FTM_STATUS_CH6F field. */ +#define BR_FTM_STATUS_CH6F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH6F. */ +#define BF_FTM_STATUS_CH6F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH6F) & BM_FTM_STATUS_CH6F) + +/*! @brief Set the CH6F field to a new value. */ +#define BW_FTM_STATUS_CH6F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH6F) = (v)) +/*@}*/ + +/*! + * @name Register FTM_STATUS, field CH7F[7] (W1C) + * + * See the register description. + * + * Values: + * - 0 - No channel event has occurred. + * - 1 - A channel event has occurred. + */ +/*@{*/ +#define BP_FTM_STATUS_CH7F (7U) /*!< Bit position for FTM_STATUS_CH7F. */ +#define BM_FTM_STATUS_CH7F (0x00000080U) /*!< Bit mask for FTM_STATUS_CH7F. */ +#define BS_FTM_STATUS_CH7F (1U) /*!< Bit field size in bits for FTM_STATUS_CH7F. */ + +/*! @brief Read current value of the FTM_STATUS_CH7F field. */ +#define BR_FTM_STATUS_CH7F(x) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F)) + +/*! @brief Format value for bitfield FTM_STATUS_CH7F. */ +#define BF_FTM_STATUS_CH7F(v) ((uint32_t)((uint32_t)(v) << BP_FTM_STATUS_CH7F) & BM_FTM_STATUS_CH7F) + +/*! @brief Set the CH7F field to a new value. */ +#define BW_FTM_STATUS_CH7F(x, v) (BITBAND_ACCESS32(HW_FTM_STATUS_ADDR(x), BP_FTM_STATUS_CH7F) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_MODE - Features Mode Selection + ******************************************************************************/ + +/*! + * @brief HW_FTM_MODE - Features Mode Selection (RW) + * + * Reset value: 0x00000004U + * + * This register contains the global enable bit for FTM-specific features and + * the control bits used to configure: Fault control mode and interrupt Capture + * Test mode PWM synchronization Write protection Channel output initialization + * These controls relate to all channels within this module. + */ +typedef union _hw_ftm_mode +{ + uint32_t U; + struct _hw_ftm_mode_bitfields + { + uint32_t FTMEN : 1; /*!< [0] FTM Enable */ + uint32_t INIT : 1; /*!< [1] Initialize The Channels Output */ + uint32_t WPDIS : 1; /*!< [2] Write Protection Disable */ + uint32_t PWMSYNC : 1; /*!< [3] PWM Synchronization Mode */ + uint32_t CAPTEST : 1; /*!< [4] Capture Test Mode Enable */ + uint32_t FAULTM : 2; /*!< [6:5] Fault Control Mode */ + uint32_t FAULTIE : 1; /*!< [7] Fault Interrupt Enable */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_mode_t; + +/*! + * @name Constants and macros for entire FTM_MODE register + */ +/*@{*/ +#define HW_FTM_MODE_ADDR(x) ((x) + 0x54U) + +#define HW_FTM_MODE(x) (*(__IO hw_ftm_mode_t *) HW_FTM_MODE_ADDR(x)) +#define HW_FTM_MODE_RD(x) (HW_FTM_MODE(x).U) +#define HW_FTM_MODE_WR(x, v) (HW_FTM_MODE(x).U = (v)) +#define HW_FTM_MODE_SET(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) | (v))) +#define HW_FTM_MODE_CLR(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) & ~(v))) +#define HW_FTM_MODE_TOG(x, v) (HW_FTM_MODE_WR(x, HW_FTM_MODE_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_MODE bitfields + */ + +/*! + * @name Register FTM_MODE, field FTMEN[0] (RW) + * + * This field is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Only the TPM-compatible registers (first set of registers) can be used + * without any restriction. Do not use the FTM-specific registers. + * - 1 - All registers including the FTM-specific registers (second set of + * registers) are available for use with no restrictions. + */ +/*@{*/ +#define BP_FTM_MODE_FTMEN (0U) /*!< Bit position for FTM_MODE_FTMEN. */ +#define BM_FTM_MODE_FTMEN (0x00000001U) /*!< Bit mask for FTM_MODE_FTMEN. */ +#define BS_FTM_MODE_FTMEN (1U) /*!< Bit field size in bits for FTM_MODE_FTMEN. */ + +/*! @brief Read current value of the FTM_MODE_FTMEN field. */ +#define BR_FTM_MODE_FTMEN(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN)) + +/*! @brief Format value for bitfield FTM_MODE_FTMEN. */ +#define BF_FTM_MODE_FTMEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FTMEN) & BM_FTM_MODE_FTMEN) + +/*! @brief Set the FTMEN field to a new value. */ +#define BW_FTM_MODE_FTMEN(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FTMEN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_MODE, field INIT[1] (RW) + * + * When a 1 is written to INIT bit the channels output is initialized according + * to the state of their corresponding bit in the OUTINIT register. Writing a 0 + * to INIT bit has no effect. The INIT bit is always read as 0. + */ +/*@{*/ +#define BP_FTM_MODE_INIT (1U) /*!< Bit position for FTM_MODE_INIT. */ +#define BM_FTM_MODE_INIT (0x00000002U) /*!< Bit mask for FTM_MODE_INIT. */ +#define BS_FTM_MODE_INIT (1U) /*!< Bit field size in bits for FTM_MODE_INIT. */ + +/*! @brief Read current value of the FTM_MODE_INIT field. */ +#define BR_FTM_MODE_INIT(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT)) + +/*! @brief Format value for bitfield FTM_MODE_INIT. */ +#define BF_FTM_MODE_INIT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_INIT) & BM_FTM_MODE_INIT) + +/*! @brief Set the INIT field to a new value. */ +#define BW_FTM_MODE_INIT(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_INIT) = (v)) +/*@}*/ + +/*! + * @name Register FTM_MODE, field WPDIS[2] (RW) + * + * When write protection is enabled (WPDIS = 0), write protected bits cannot be + * written. When write protection is disabled (WPDIS = 1), write protected bits + * can be written. The WPDIS bit is the negation of the WPEN bit. WPDIS is cleared + * when 1 is written to WPEN. WPDIS is set when WPEN bit is read as a 1 and then + * 1 is written to WPDIS. Writing 0 to WPDIS has no effect. + * + * Values: + * - 0 - Write protection is enabled. + * - 1 - Write protection is disabled. + */ +/*@{*/ +#define BP_FTM_MODE_WPDIS (2U) /*!< Bit position for FTM_MODE_WPDIS. */ +#define BM_FTM_MODE_WPDIS (0x00000004U) /*!< Bit mask for FTM_MODE_WPDIS. */ +#define BS_FTM_MODE_WPDIS (1U) /*!< Bit field size in bits for FTM_MODE_WPDIS. */ + +/*! @brief Read current value of the FTM_MODE_WPDIS field. */ +#define BR_FTM_MODE_WPDIS(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS)) + +/*! @brief Format value for bitfield FTM_MODE_WPDIS. */ +#define BF_FTM_MODE_WPDIS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_WPDIS) & BM_FTM_MODE_WPDIS) + +/*! @brief Set the WPDIS field to a new value. */ +#define BW_FTM_MODE_WPDIS(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_WPDIS) = (v)) +/*@}*/ + +/*! + * @name Register FTM_MODE, field PWMSYNC[3] (RW) + * + * Selects which triggers can be used by MOD, CnV, OUTMASK, and FTM counter + * synchronization. See PWM synchronization. The PWMSYNC bit configures the + * synchronization when SYNCMODE is 0. + * + * Values: + * - 0 - No restrictions. Software and hardware triggers can be used by MOD, + * CnV, OUTMASK, and FTM counter synchronization. + * - 1 - Software trigger can only be used by MOD and CnV synchronization, and + * hardware triggers can only be used by OUTMASK and FTM counter + * synchronization. + */ +/*@{*/ +#define BP_FTM_MODE_PWMSYNC (3U) /*!< Bit position for FTM_MODE_PWMSYNC. */ +#define BM_FTM_MODE_PWMSYNC (0x00000008U) /*!< Bit mask for FTM_MODE_PWMSYNC. */ +#define BS_FTM_MODE_PWMSYNC (1U) /*!< Bit field size in bits for FTM_MODE_PWMSYNC. */ + +/*! @brief Read current value of the FTM_MODE_PWMSYNC field. */ +#define BR_FTM_MODE_PWMSYNC(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC)) + +/*! @brief Format value for bitfield FTM_MODE_PWMSYNC. */ +#define BF_FTM_MODE_PWMSYNC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_PWMSYNC) & BM_FTM_MODE_PWMSYNC) + +/*! @brief Set the PWMSYNC field to a new value. */ +#define BW_FTM_MODE_PWMSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_PWMSYNC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_MODE, field CAPTEST[4] (RW) + * + * Enables the capture test mode. This field is write protected. It can be + * written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Capture test mode is disabled. + * - 1 - Capture test mode is enabled. + */ +/*@{*/ +#define BP_FTM_MODE_CAPTEST (4U) /*!< Bit position for FTM_MODE_CAPTEST. */ +#define BM_FTM_MODE_CAPTEST (0x00000010U) /*!< Bit mask for FTM_MODE_CAPTEST. */ +#define BS_FTM_MODE_CAPTEST (1U) /*!< Bit field size in bits for FTM_MODE_CAPTEST. */ + +/*! @brief Read current value of the FTM_MODE_CAPTEST field. */ +#define BR_FTM_MODE_CAPTEST(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST)) + +/*! @brief Format value for bitfield FTM_MODE_CAPTEST. */ +#define BF_FTM_MODE_CAPTEST(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_CAPTEST) & BM_FTM_MODE_CAPTEST) + +/*! @brief Set the CAPTEST field to a new value. */ +#define BW_FTM_MODE_CAPTEST(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_CAPTEST) = (v)) +/*@}*/ + +/*! + * @name Register FTM_MODE, field FAULTM[6:5] (RW) + * + * Defines the FTM fault control mode. This field is write protected. It can be + * written only when MODE[WPDIS] = 1. + * + * Values: + * - 00 - Fault control is disabled for all channels. + * - 01 - Fault control is enabled for even channels only (channels 0, 2, 4, and + * 6), and the selected mode is the manual fault clearing. + * - 10 - Fault control is enabled for all channels, and the selected mode is + * the manual fault clearing. + * - 11 - Fault control is enabled for all channels, and the selected mode is + * the automatic fault clearing. + */ +/*@{*/ +#define BP_FTM_MODE_FAULTM (5U) /*!< Bit position for FTM_MODE_FAULTM. */ +#define BM_FTM_MODE_FAULTM (0x00000060U) /*!< Bit mask for FTM_MODE_FAULTM. */ +#define BS_FTM_MODE_FAULTM (2U) /*!< Bit field size in bits for FTM_MODE_FAULTM. */ + +/*! @brief Read current value of the FTM_MODE_FAULTM field. */ +#define BR_FTM_MODE_FAULTM(x) (HW_FTM_MODE(x).B.FAULTM) + +/*! @brief Format value for bitfield FTM_MODE_FAULTM. */ +#define BF_FTM_MODE_FAULTM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FAULTM) & BM_FTM_MODE_FAULTM) + +/*! @brief Set the FAULTM field to a new value. */ +#define BW_FTM_MODE_FAULTM(x, v) (HW_FTM_MODE_WR(x, (HW_FTM_MODE_RD(x) & ~BM_FTM_MODE_FAULTM) | BF_FTM_MODE_FAULTM(v))) +/*@}*/ + +/*! + * @name Register FTM_MODE, field FAULTIE[7] (RW) + * + * Enables the generation of an interrupt when a fault is detected by FTM and + * the FTM fault control is enabled. + * + * Values: + * - 0 - Fault control interrupt is disabled. + * - 1 - Fault control interrupt is enabled. + */ +/*@{*/ +#define BP_FTM_MODE_FAULTIE (7U) /*!< Bit position for FTM_MODE_FAULTIE. */ +#define BM_FTM_MODE_FAULTIE (0x00000080U) /*!< Bit mask for FTM_MODE_FAULTIE. */ +#define BS_FTM_MODE_FAULTIE (1U) /*!< Bit field size in bits for FTM_MODE_FAULTIE. */ + +/*! @brief Read current value of the FTM_MODE_FAULTIE field. */ +#define BR_FTM_MODE_FAULTIE(x) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE)) + +/*! @brief Format value for bitfield FTM_MODE_FAULTIE. */ +#define BF_FTM_MODE_FAULTIE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_MODE_FAULTIE) & BM_FTM_MODE_FAULTIE) + +/*! @brief Set the FAULTIE field to a new value. */ +#define BW_FTM_MODE_FAULTIE(x, v) (BITBAND_ACCESS32(HW_FTM_MODE_ADDR(x), BP_FTM_MODE_FAULTIE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_SYNC - Synchronization + ******************************************************************************/ + +/*! + * @brief HW_FTM_SYNC - Synchronization (RW) + * + * Reset value: 0x00000000U + * + * This register configures the PWM synchronization. A synchronization event can + * perform the synchronized update of MOD, CV, and OUTMASK registers with the + * value of their write buffer and the FTM counter initialization. The software + * trigger, SWSYNC bit, and hardware triggers TRIG0, TRIG1, and TRIG2 bits have a + * potential conflict if used together when SYNCMODE = 0. Use only hardware or + * software triggers but not both at the same time, otherwise unpredictable behavior + * is likely to happen. The selection of the loading point, CNTMAX and CNTMIN + * bits, is intended to provide the update of MOD, CNTIN, and CnV registers across + * all enabled channels simultaneously. The use of the loading point selection + * together with SYNCMODE = 0 and hardware trigger selection, TRIG0, TRIG1, or TRIG2 + * bits, is likely to result in unpredictable behavior. The synchronization + * event selection also depends on the PWMSYNC (MODE register) and SYNCMODE (SYNCONF + * register) bits. See PWM synchronization. + */ +typedef union _hw_ftm_sync +{ + uint32_t U; + struct _hw_ftm_sync_bitfields + { + uint32_t CNTMIN : 1; /*!< [0] Minimum Loading Point Enable */ + uint32_t CNTMAX : 1; /*!< [1] Maximum Loading Point Enable */ + uint32_t REINIT : 1; /*!< [2] FTM Counter Reinitialization By + * Synchronization (FTM counter synchronization) */ + uint32_t SYNCHOM : 1; /*!< [3] Output Mask Synchronization */ + uint32_t TRIG0 : 1; /*!< [4] PWM Synchronization Hardware Trigger 0 */ + uint32_t TRIG1 : 1; /*!< [5] PWM Synchronization Hardware Trigger 1 */ + uint32_t TRIG2 : 1; /*!< [6] PWM Synchronization Hardware Trigger 2 */ + uint32_t SWSYNC : 1; /*!< [7] PWM Synchronization Software Trigger */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_sync_t; + +/*! + * @name Constants and macros for entire FTM_SYNC register + */ +/*@{*/ +#define HW_FTM_SYNC_ADDR(x) ((x) + 0x58U) + +#define HW_FTM_SYNC(x) (*(__IO hw_ftm_sync_t *) HW_FTM_SYNC_ADDR(x)) +#define HW_FTM_SYNC_RD(x) (HW_FTM_SYNC(x).U) +#define HW_FTM_SYNC_WR(x, v) (HW_FTM_SYNC(x).U = (v)) +#define HW_FTM_SYNC_SET(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) | (v))) +#define HW_FTM_SYNC_CLR(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) & ~(v))) +#define HW_FTM_SYNC_TOG(x, v) (HW_FTM_SYNC_WR(x, HW_FTM_SYNC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_SYNC bitfields + */ + +/*! + * @name Register FTM_SYNC, field CNTMIN[0] (RW) + * + * Selects the minimum loading point to PWM synchronization. See Boundary cycle + * and loading points. If CNTMIN is one, the selected loading point is when the + * FTM counter reaches its minimum value (CNTIN register). + * + * Values: + * - 0 - The minimum loading point is disabled. + * - 1 - The minimum loading point is enabled. + */ +/*@{*/ +#define BP_FTM_SYNC_CNTMIN (0U) /*!< Bit position for FTM_SYNC_CNTMIN. */ +#define BM_FTM_SYNC_CNTMIN (0x00000001U) /*!< Bit mask for FTM_SYNC_CNTMIN. */ +#define BS_FTM_SYNC_CNTMIN (1U) /*!< Bit field size in bits for FTM_SYNC_CNTMIN. */ + +/*! @brief Read current value of the FTM_SYNC_CNTMIN field. */ +#define BR_FTM_SYNC_CNTMIN(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN)) + +/*! @brief Format value for bitfield FTM_SYNC_CNTMIN. */ +#define BF_FTM_SYNC_CNTMIN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_CNTMIN) & BM_FTM_SYNC_CNTMIN) + +/*! @brief Set the CNTMIN field to a new value. */ +#define BW_FTM_SYNC_CNTMIN(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMIN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field CNTMAX[1] (RW) + * + * Selects the maximum loading point to PWM synchronization. See Boundary cycle + * and loading points. If CNTMAX is 1, the selected loading point is when the FTM + * counter reaches its maximum value (MOD register). + * + * Values: + * - 0 - The maximum loading point is disabled. + * - 1 - The maximum loading point is enabled. + */ +/*@{*/ +#define BP_FTM_SYNC_CNTMAX (1U) /*!< Bit position for FTM_SYNC_CNTMAX. */ +#define BM_FTM_SYNC_CNTMAX (0x00000002U) /*!< Bit mask for FTM_SYNC_CNTMAX. */ +#define BS_FTM_SYNC_CNTMAX (1U) /*!< Bit field size in bits for FTM_SYNC_CNTMAX. */ + +/*! @brief Read current value of the FTM_SYNC_CNTMAX field. */ +#define BR_FTM_SYNC_CNTMAX(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX)) + +/*! @brief Format value for bitfield FTM_SYNC_CNTMAX. */ +#define BF_FTM_SYNC_CNTMAX(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_CNTMAX) & BM_FTM_SYNC_CNTMAX) + +/*! @brief Set the CNTMAX field to a new value. */ +#define BW_FTM_SYNC_CNTMAX(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_CNTMAX) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field REINIT[2] (RW) + * + * Determines if the FTM counter is reinitialized when the selected trigger for + * the synchronization is detected. The REINIT bit configures the synchronization + * when SYNCMODE is zero. + * + * Values: + * - 0 - FTM counter continues to count normally. + * - 1 - FTM counter is updated with its initial value when the selected trigger + * is detected. + */ +/*@{*/ +#define BP_FTM_SYNC_REINIT (2U) /*!< Bit position for FTM_SYNC_REINIT. */ +#define BM_FTM_SYNC_REINIT (0x00000004U) /*!< Bit mask for FTM_SYNC_REINIT. */ +#define BS_FTM_SYNC_REINIT (1U) /*!< Bit field size in bits for FTM_SYNC_REINIT. */ + +/*! @brief Read current value of the FTM_SYNC_REINIT field. */ +#define BR_FTM_SYNC_REINIT(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT)) + +/*! @brief Format value for bitfield FTM_SYNC_REINIT. */ +#define BF_FTM_SYNC_REINIT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_REINIT) & BM_FTM_SYNC_REINIT) + +/*! @brief Set the REINIT field to a new value. */ +#define BW_FTM_SYNC_REINIT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_REINIT) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field SYNCHOM[3] (RW) + * + * Selects when the OUTMASK register is updated with the value of its buffer. + * + * Values: + * - 0 - OUTMASK register is updated with the value of its buffer in all rising + * edges of the system clock. + * - 1 - OUTMASK register is updated with the value of its buffer only by the + * PWM synchronization. + */ +/*@{*/ +#define BP_FTM_SYNC_SYNCHOM (3U) /*!< Bit position for FTM_SYNC_SYNCHOM. */ +#define BM_FTM_SYNC_SYNCHOM (0x00000008U) /*!< Bit mask for FTM_SYNC_SYNCHOM. */ +#define BS_FTM_SYNC_SYNCHOM (1U) /*!< Bit field size in bits for FTM_SYNC_SYNCHOM. */ + +/*! @brief Read current value of the FTM_SYNC_SYNCHOM field. */ +#define BR_FTM_SYNC_SYNCHOM(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM)) + +/*! @brief Format value for bitfield FTM_SYNC_SYNCHOM. */ +#define BF_FTM_SYNC_SYNCHOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_SYNCHOM) & BM_FTM_SYNC_SYNCHOM) + +/*! @brief Set the SYNCHOM field to a new value. */ +#define BW_FTM_SYNC_SYNCHOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SYNCHOM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field TRIG0[4] (RW) + * + * Enables hardware trigger 0 to the PWM synchronization. Hardware trigger 0 + * occurs when a rising edge is detected at the trigger 0 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +/*@{*/ +#define BP_FTM_SYNC_TRIG0 (4U) /*!< Bit position for FTM_SYNC_TRIG0. */ +#define BM_FTM_SYNC_TRIG0 (0x00000010U) /*!< Bit mask for FTM_SYNC_TRIG0. */ +#define BS_FTM_SYNC_TRIG0 (1U) /*!< Bit field size in bits for FTM_SYNC_TRIG0. */ + +/*! @brief Read current value of the FTM_SYNC_TRIG0 field. */ +#define BR_FTM_SYNC_TRIG0(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0)) + +/*! @brief Format value for bitfield FTM_SYNC_TRIG0. */ +#define BF_FTM_SYNC_TRIG0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG0) & BM_FTM_SYNC_TRIG0) + +/*! @brief Set the TRIG0 field to a new value. */ +#define BW_FTM_SYNC_TRIG0(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field TRIG1[5] (RW) + * + * Enables hardware trigger 1 to the PWM synchronization. Hardware trigger 1 + * happens when a rising edge is detected at the trigger 1 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +/*@{*/ +#define BP_FTM_SYNC_TRIG1 (5U) /*!< Bit position for FTM_SYNC_TRIG1. */ +#define BM_FTM_SYNC_TRIG1 (0x00000020U) /*!< Bit mask for FTM_SYNC_TRIG1. */ +#define BS_FTM_SYNC_TRIG1 (1U) /*!< Bit field size in bits for FTM_SYNC_TRIG1. */ + +/*! @brief Read current value of the FTM_SYNC_TRIG1 field. */ +#define BR_FTM_SYNC_TRIG1(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1)) + +/*! @brief Format value for bitfield FTM_SYNC_TRIG1. */ +#define BF_FTM_SYNC_TRIG1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG1) & BM_FTM_SYNC_TRIG1) + +/*! @brief Set the TRIG1 field to a new value. */ +#define BW_FTM_SYNC_TRIG1(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field TRIG2[6] (RW) + * + * Enables hardware trigger 2 to the PWM synchronization. Hardware trigger 2 + * happens when a rising edge is detected at the trigger 2 input signal. + * + * Values: + * - 0 - Trigger is disabled. + * - 1 - Trigger is enabled. + */ +/*@{*/ +#define BP_FTM_SYNC_TRIG2 (6U) /*!< Bit position for FTM_SYNC_TRIG2. */ +#define BM_FTM_SYNC_TRIG2 (0x00000040U) /*!< Bit mask for FTM_SYNC_TRIG2. */ +#define BS_FTM_SYNC_TRIG2 (1U) /*!< Bit field size in bits for FTM_SYNC_TRIG2. */ + +/*! @brief Read current value of the FTM_SYNC_TRIG2 field. */ +#define BR_FTM_SYNC_TRIG2(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2)) + +/*! @brief Format value for bitfield FTM_SYNC_TRIG2. */ +#define BF_FTM_SYNC_TRIG2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_TRIG2) & BM_FTM_SYNC_TRIG2) + +/*! @brief Set the TRIG2 field to a new value. */ +#define BW_FTM_SYNC_TRIG2(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_TRIG2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNC, field SWSYNC[7] (RW) + * + * Selects the software trigger as the PWM synchronization trigger. The software + * trigger happens when a 1 is written to SWSYNC bit. + * + * Values: + * - 0 - Software trigger is not selected. + * - 1 - Software trigger is selected. + */ +/*@{*/ +#define BP_FTM_SYNC_SWSYNC (7U) /*!< Bit position for FTM_SYNC_SWSYNC. */ +#define BM_FTM_SYNC_SWSYNC (0x00000080U) /*!< Bit mask for FTM_SYNC_SWSYNC. */ +#define BS_FTM_SYNC_SWSYNC (1U) /*!< Bit field size in bits for FTM_SYNC_SWSYNC. */ + +/*! @brief Read current value of the FTM_SYNC_SWSYNC field. */ +#define BR_FTM_SYNC_SWSYNC(x) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC)) + +/*! @brief Format value for bitfield FTM_SYNC_SWSYNC. */ +#define BF_FTM_SYNC_SWSYNC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNC_SWSYNC) & BM_FTM_SYNC_SWSYNC) + +/*! @brief Set the SWSYNC field to a new value. */ +#define BW_FTM_SYNC_SWSYNC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNC_ADDR(x), BP_FTM_SYNC_SWSYNC) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_OUTINIT - Initial State For Channels Output + ******************************************************************************/ + +/*! + * @brief HW_FTM_OUTINIT - Initial State For Channels Output (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_ftm_outinit +{ + uint32_t U; + struct _hw_ftm_outinit_bitfields + { + uint32_t CH0OI : 1; /*!< [0] Channel 0 Output Initialization Value */ + uint32_t CH1OI : 1; /*!< [1] Channel 1 Output Initialization Value */ + uint32_t CH2OI : 1; /*!< [2] Channel 2 Output Initialization Value */ + uint32_t CH3OI : 1; /*!< [3] Channel 3 Output Initialization Value */ + uint32_t CH4OI : 1; /*!< [4] Channel 4 Output Initialization Value */ + uint32_t CH5OI : 1; /*!< [5] Channel 5 Output Initialization Value */ + uint32_t CH6OI : 1; /*!< [6] Channel 6 Output Initialization Value */ + uint32_t CH7OI : 1; /*!< [7] Channel 7 Output Initialization Value */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_outinit_t; + +/*! + * @name Constants and macros for entire FTM_OUTINIT register + */ +/*@{*/ +#define HW_FTM_OUTINIT_ADDR(x) ((x) + 0x5CU) + +#define HW_FTM_OUTINIT(x) (*(__IO hw_ftm_outinit_t *) HW_FTM_OUTINIT_ADDR(x)) +#define HW_FTM_OUTINIT_RD(x) (HW_FTM_OUTINIT(x).U) +#define HW_FTM_OUTINIT_WR(x, v) (HW_FTM_OUTINIT(x).U = (v)) +#define HW_FTM_OUTINIT_SET(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) | (v))) +#define HW_FTM_OUTINIT_CLR(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) & ~(v))) +#define HW_FTM_OUTINIT_TOG(x, v) (HW_FTM_OUTINIT_WR(x, HW_FTM_OUTINIT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_OUTINIT bitfields + */ + +/*! + * @name Register FTM_OUTINIT, field CH0OI[0] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH0OI (0U) /*!< Bit position for FTM_OUTINIT_CH0OI. */ +#define BM_FTM_OUTINIT_CH0OI (0x00000001U) /*!< Bit mask for FTM_OUTINIT_CH0OI. */ +#define BS_FTM_OUTINIT_CH0OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH0OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH0OI field. */ +#define BR_FTM_OUTINIT_CH0OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH0OI. */ +#define BF_FTM_OUTINIT_CH0OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH0OI) & BM_FTM_OUTINIT_CH0OI) + +/*! @brief Set the CH0OI field to a new value. */ +#define BW_FTM_OUTINIT_CH0OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH0OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH1OI[1] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH1OI (1U) /*!< Bit position for FTM_OUTINIT_CH1OI. */ +#define BM_FTM_OUTINIT_CH1OI (0x00000002U) /*!< Bit mask for FTM_OUTINIT_CH1OI. */ +#define BS_FTM_OUTINIT_CH1OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH1OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH1OI field. */ +#define BR_FTM_OUTINIT_CH1OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH1OI. */ +#define BF_FTM_OUTINIT_CH1OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH1OI) & BM_FTM_OUTINIT_CH1OI) + +/*! @brief Set the CH1OI field to a new value. */ +#define BW_FTM_OUTINIT_CH1OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH1OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH2OI[2] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH2OI (2U) /*!< Bit position for FTM_OUTINIT_CH2OI. */ +#define BM_FTM_OUTINIT_CH2OI (0x00000004U) /*!< Bit mask for FTM_OUTINIT_CH2OI. */ +#define BS_FTM_OUTINIT_CH2OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH2OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH2OI field. */ +#define BR_FTM_OUTINIT_CH2OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH2OI. */ +#define BF_FTM_OUTINIT_CH2OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH2OI) & BM_FTM_OUTINIT_CH2OI) + +/*! @brief Set the CH2OI field to a new value. */ +#define BW_FTM_OUTINIT_CH2OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH2OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH3OI[3] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH3OI (3U) /*!< Bit position for FTM_OUTINIT_CH3OI. */ +#define BM_FTM_OUTINIT_CH3OI (0x00000008U) /*!< Bit mask for FTM_OUTINIT_CH3OI. */ +#define BS_FTM_OUTINIT_CH3OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH3OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH3OI field. */ +#define BR_FTM_OUTINIT_CH3OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH3OI. */ +#define BF_FTM_OUTINIT_CH3OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH3OI) & BM_FTM_OUTINIT_CH3OI) + +/*! @brief Set the CH3OI field to a new value. */ +#define BW_FTM_OUTINIT_CH3OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH3OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH4OI[4] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH4OI (4U) /*!< Bit position for FTM_OUTINIT_CH4OI. */ +#define BM_FTM_OUTINIT_CH4OI (0x00000010U) /*!< Bit mask for FTM_OUTINIT_CH4OI. */ +#define BS_FTM_OUTINIT_CH4OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH4OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH4OI field. */ +#define BR_FTM_OUTINIT_CH4OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH4OI. */ +#define BF_FTM_OUTINIT_CH4OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH4OI) & BM_FTM_OUTINIT_CH4OI) + +/*! @brief Set the CH4OI field to a new value. */ +#define BW_FTM_OUTINIT_CH4OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH4OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH5OI[5] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH5OI (5U) /*!< Bit position for FTM_OUTINIT_CH5OI. */ +#define BM_FTM_OUTINIT_CH5OI (0x00000020U) /*!< Bit mask for FTM_OUTINIT_CH5OI. */ +#define BS_FTM_OUTINIT_CH5OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH5OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH5OI field. */ +#define BR_FTM_OUTINIT_CH5OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH5OI. */ +#define BF_FTM_OUTINIT_CH5OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH5OI) & BM_FTM_OUTINIT_CH5OI) + +/*! @brief Set the CH5OI field to a new value. */ +#define BW_FTM_OUTINIT_CH5OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH5OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH6OI[6] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH6OI (6U) /*!< Bit position for FTM_OUTINIT_CH6OI. */ +#define BM_FTM_OUTINIT_CH6OI (0x00000040U) /*!< Bit mask for FTM_OUTINIT_CH6OI. */ +#define BS_FTM_OUTINIT_CH6OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH6OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH6OI field. */ +#define BR_FTM_OUTINIT_CH6OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH6OI. */ +#define BF_FTM_OUTINIT_CH6OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH6OI) & BM_FTM_OUTINIT_CH6OI) + +/*! @brief Set the CH6OI field to a new value. */ +#define BW_FTM_OUTINIT_CH6OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH6OI) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTINIT, field CH7OI[7] (RW) + * + * Selects the value that is forced into the channel output when the + * initialization occurs. + * + * Values: + * - 0 - The initialization value is 0. + * - 1 - The initialization value is 1. + */ +/*@{*/ +#define BP_FTM_OUTINIT_CH7OI (7U) /*!< Bit position for FTM_OUTINIT_CH7OI. */ +#define BM_FTM_OUTINIT_CH7OI (0x00000080U) /*!< Bit mask for FTM_OUTINIT_CH7OI. */ +#define BS_FTM_OUTINIT_CH7OI (1U) /*!< Bit field size in bits for FTM_OUTINIT_CH7OI. */ + +/*! @brief Read current value of the FTM_OUTINIT_CH7OI field. */ +#define BR_FTM_OUTINIT_CH7OI(x) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI)) + +/*! @brief Format value for bitfield FTM_OUTINIT_CH7OI. */ +#define BF_FTM_OUTINIT_CH7OI(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTINIT_CH7OI) & BM_FTM_OUTINIT_CH7OI) + +/*! @brief Set the CH7OI field to a new value. */ +#define BW_FTM_OUTINIT_CH7OI(x, v) (BITBAND_ACCESS32(HW_FTM_OUTINIT_ADDR(x), BP_FTM_OUTINIT_CH7OI) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_OUTMASK - Output Mask + ******************************************************************************/ + +/*! + * @brief HW_FTM_OUTMASK - Output Mask (RW) + * + * Reset value: 0x00000000U + * + * This register provides a mask for each FTM channel. The mask of a channel + * determines if its output responds, that is, it is masked or not, when a match + * occurs. This feature is used for BLDC control where the PWM signal is presented + * to an electric motor at specific times to provide electronic commutation. Any + * write to the OUTMASK register, stores the value in its write buffer. The + * register is updated with the value of its write buffer according to PWM + * synchronization. + */ +typedef union _hw_ftm_outmask +{ + uint32_t U; + struct _hw_ftm_outmask_bitfields + { + uint32_t CH0OM : 1; /*!< [0] Channel 0 Output Mask */ + uint32_t CH1OM : 1; /*!< [1] Channel 1 Output Mask */ + uint32_t CH2OM : 1; /*!< [2] Channel 2 Output Mask */ + uint32_t CH3OM : 1; /*!< [3] Channel 3 Output Mask */ + uint32_t CH4OM : 1; /*!< [4] Channel 4 Output Mask */ + uint32_t CH5OM : 1; /*!< [5] Channel 5 Output Mask */ + uint32_t CH6OM : 1; /*!< [6] Channel 6 Output Mask */ + uint32_t CH7OM : 1; /*!< [7] Channel 7 Output Mask */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_outmask_t; + +/*! + * @name Constants and macros for entire FTM_OUTMASK register + */ +/*@{*/ +#define HW_FTM_OUTMASK_ADDR(x) ((x) + 0x60U) + +#define HW_FTM_OUTMASK(x) (*(__IO hw_ftm_outmask_t *) HW_FTM_OUTMASK_ADDR(x)) +#define HW_FTM_OUTMASK_RD(x) (HW_FTM_OUTMASK(x).U) +#define HW_FTM_OUTMASK_WR(x, v) (HW_FTM_OUTMASK(x).U = (v)) +#define HW_FTM_OUTMASK_SET(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) | (v))) +#define HW_FTM_OUTMASK_CLR(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) & ~(v))) +#define HW_FTM_OUTMASK_TOG(x, v) (HW_FTM_OUTMASK_WR(x, HW_FTM_OUTMASK_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_OUTMASK bitfields + */ + +/*! + * @name Register FTM_OUTMASK, field CH0OM[0] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH0OM (0U) /*!< Bit position for FTM_OUTMASK_CH0OM. */ +#define BM_FTM_OUTMASK_CH0OM (0x00000001U) /*!< Bit mask for FTM_OUTMASK_CH0OM. */ +#define BS_FTM_OUTMASK_CH0OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH0OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH0OM field. */ +#define BR_FTM_OUTMASK_CH0OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH0OM. */ +#define BF_FTM_OUTMASK_CH0OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH0OM) & BM_FTM_OUTMASK_CH0OM) + +/*! @brief Set the CH0OM field to a new value. */ +#define BW_FTM_OUTMASK_CH0OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH0OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH1OM[1] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH1OM (1U) /*!< Bit position for FTM_OUTMASK_CH1OM. */ +#define BM_FTM_OUTMASK_CH1OM (0x00000002U) /*!< Bit mask for FTM_OUTMASK_CH1OM. */ +#define BS_FTM_OUTMASK_CH1OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH1OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH1OM field. */ +#define BR_FTM_OUTMASK_CH1OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH1OM. */ +#define BF_FTM_OUTMASK_CH1OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH1OM) & BM_FTM_OUTMASK_CH1OM) + +/*! @brief Set the CH1OM field to a new value. */ +#define BW_FTM_OUTMASK_CH1OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH1OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH2OM[2] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH2OM (2U) /*!< Bit position for FTM_OUTMASK_CH2OM. */ +#define BM_FTM_OUTMASK_CH2OM (0x00000004U) /*!< Bit mask for FTM_OUTMASK_CH2OM. */ +#define BS_FTM_OUTMASK_CH2OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH2OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH2OM field. */ +#define BR_FTM_OUTMASK_CH2OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH2OM. */ +#define BF_FTM_OUTMASK_CH2OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH2OM) & BM_FTM_OUTMASK_CH2OM) + +/*! @brief Set the CH2OM field to a new value. */ +#define BW_FTM_OUTMASK_CH2OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH2OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH3OM[3] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH3OM (3U) /*!< Bit position for FTM_OUTMASK_CH3OM. */ +#define BM_FTM_OUTMASK_CH3OM (0x00000008U) /*!< Bit mask for FTM_OUTMASK_CH3OM. */ +#define BS_FTM_OUTMASK_CH3OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH3OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH3OM field. */ +#define BR_FTM_OUTMASK_CH3OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH3OM. */ +#define BF_FTM_OUTMASK_CH3OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH3OM) & BM_FTM_OUTMASK_CH3OM) + +/*! @brief Set the CH3OM field to a new value. */ +#define BW_FTM_OUTMASK_CH3OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH3OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH4OM[4] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH4OM (4U) /*!< Bit position for FTM_OUTMASK_CH4OM. */ +#define BM_FTM_OUTMASK_CH4OM (0x00000010U) /*!< Bit mask for FTM_OUTMASK_CH4OM. */ +#define BS_FTM_OUTMASK_CH4OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH4OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH4OM field. */ +#define BR_FTM_OUTMASK_CH4OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH4OM. */ +#define BF_FTM_OUTMASK_CH4OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH4OM) & BM_FTM_OUTMASK_CH4OM) + +/*! @brief Set the CH4OM field to a new value. */ +#define BW_FTM_OUTMASK_CH4OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH4OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH5OM[5] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH5OM (5U) /*!< Bit position for FTM_OUTMASK_CH5OM. */ +#define BM_FTM_OUTMASK_CH5OM (0x00000020U) /*!< Bit mask for FTM_OUTMASK_CH5OM. */ +#define BS_FTM_OUTMASK_CH5OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH5OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH5OM field. */ +#define BR_FTM_OUTMASK_CH5OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH5OM. */ +#define BF_FTM_OUTMASK_CH5OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH5OM) & BM_FTM_OUTMASK_CH5OM) + +/*! @brief Set the CH5OM field to a new value. */ +#define BW_FTM_OUTMASK_CH5OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH5OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH6OM[6] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH6OM (6U) /*!< Bit position for FTM_OUTMASK_CH6OM. */ +#define BM_FTM_OUTMASK_CH6OM (0x00000040U) /*!< Bit mask for FTM_OUTMASK_CH6OM. */ +#define BS_FTM_OUTMASK_CH6OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH6OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH6OM field. */ +#define BR_FTM_OUTMASK_CH6OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH6OM. */ +#define BF_FTM_OUTMASK_CH6OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH6OM) & BM_FTM_OUTMASK_CH6OM) + +/*! @brief Set the CH6OM field to a new value. */ +#define BW_FTM_OUTMASK_CH6OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH6OM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_OUTMASK, field CH7OM[7] (RW) + * + * Defines if the channel output is masked or unmasked. + * + * Values: + * - 0 - Channel output is not masked. It continues to operate normally. + * - 1 - Channel output is masked. It is forced to its inactive state. + */ +/*@{*/ +#define BP_FTM_OUTMASK_CH7OM (7U) /*!< Bit position for FTM_OUTMASK_CH7OM. */ +#define BM_FTM_OUTMASK_CH7OM (0x00000080U) /*!< Bit mask for FTM_OUTMASK_CH7OM. */ +#define BS_FTM_OUTMASK_CH7OM (1U) /*!< Bit field size in bits for FTM_OUTMASK_CH7OM. */ + +/*! @brief Read current value of the FTM_OUTMASK_CH7OM field. */ +#define BR_FTM_OUTMASK_CH7OM(x) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM)) + +/*! @brief Format value for bitfield FTM_OUTMASK_CH7OM. */ +#define BF_FTM_OUTMASK_CH7OM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_OUTMASK_CH7OM) & BM_FTM_OUTMASK_CH7OM) + +/*! @brief Set the CH7OM field to a new value. */ +#define BW_FTM_OUTMASK_CH7OM(x, v) (BITBAND_ACCESS32(HW_FTM_OUTMASK_ADDR(x), BP_FTM_OUTMASK_CH7OM) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_COMBINE - Function For Linked Channels + ******************************************************************************/ + +/*! + * @brief HW_FTM_COMBINE - Function For Linked Channels (RW) + * + * Reset value: 0x00000000U + * + * This register contains the control bits used to configure the fault control, + * synchronization, deadtime insertion, Dual Edge Capture mode, Complementary, + * and Combine mode for each pair of channels (n) and (n+1), where n equals 0, 2, + * 4, and 6. + */ +typedef union _hw_ftm_combine +{ + uint32_t U; + struct _hw_ftm_combine_bitfields + { + uint32_t COMBINE0 : 1; /*!< [0] Combine Channels For n = 0 */ + uint32_t COMP0 : 1; /*!< [1] Complement Of Channel (n) For n = 0 */ + uint32_t DECAPEN0 : 1; /*!< [2] Dual Edge Capture Mode Enable For n = + * 0 */ + uint32_t DECAP0 : 1; /*!< [3] Dual Edge Capture Mode Captures For n = + * 0 */ + uint32_t DTEN0 : 1; /*!< [4] Deadtime Enable For n = 0 */ + uint32_t SYNCEN0 : 1; /*!< [5] Synchronization Enable For n = 0 */ + uint32_t FAULTEN0 : 1; /*!< [6] Fault Control Enable For n = 0 */ + uint32_t RESERVED0 : 1; /*!< [7] */ + uint32_t COMBINE1 : 1; /*!< [8] Combine Channels For n = 2 */ + uint32_t COMP1 : 1; /*!< [9] Complement Of Channel (n) For n = 2 */ + uint32_t DECAPEN1 : 1; /*!< [10] Dual Edge Capture Mode Enable For n + * = 2 */ + uint32_t DECAP1 : 1; /*!< [11] Dual Edge Capture Mode Captures For n + * = 2 */ + uint32_t DTEN1 : 1; /*!< [12] Deadtime Enable For n = 2 */ + uint32_t SYNCEN1 : 1; /*!< [13] Synchronization Enable For n = 2 */ + uint32_t FAULTEN1 : 1; /*!< [14] Fault Control Enable For n = 2 */ + uint32_t RESERVED1 : 1; /*!< [15] */ + uint32_t COMBINE2 : 1; /*!< [16] Combine Channels For n = 4 */ + uint32_t COMP2 : 1; /*!< [17] Complement Of Channel (n) For n = 4 */ + uint32_t DECAPEN2 : 1; /*!< [18] Dual Edge Capture Mode Enable For n + * = 4 */ + uint32_t DECAP2 : 1; /*!< [19] Dual Edge Capture Mode Captures For n + * = 4 */ + uint32_t DTEN2 : 1; /*!< [20] Deadtime Enable For n = 4 */ + uint32_t SYNCEN2 : 1; /*!< [21] Synchronization Enable For n = 4 */ + uint32_t FAULTEN2 : 1; /*!< [22] Fault Control Enable For n = 4 */ + uint32_t RESERVED2 : 1; /*!< [23] */ + uint32_t COMBINE3 : 1; /*!< [24] Combine Channels For n = 6 */ + uint32_t COMP3 : 1; /*!< [25] Complement Of Channel (n) for n = 6 */ + uint32_t DECAPEN3 : 1; /*!< [26] Dual Edge Capture Mode Enable For n + * = 6 */ + uint32_t DECAP3 : 1; /*!< [27] Dual Edge Capture Mode Captures For n + * = 6 */ + uint32_t DTEN3 : 1; /*!< [28] Deadtime Enable For n = 6 */ + uint32_t SYNCEN3 : 1; /*!< [29] Synchronization Enable For n = 6 */ + uint32_t FAULTEN3 : 1; /*!< [30] Fault Control Enable For n = 6 */ + uint32_t RESERVED3 : 1; /*!< [31] */ + } B; +} hw_ftm_combine_t; + +/*! + * @name Constants and macros for entire FTM_COMBINE register + */ +/*@{*/ +#define HW_FTM_COMBINE_ADDR(x) ((x) + 0x64U) + +#define HW_FTM_COMBINE(x) (*(__IO hw_ftm_combine_t *) HW_FTM_COMBINE_ADDR(x)) +#define HW_FTM_COMBINE_RD(x) (HW_FTM_COMBINE(x).U) +#define HW_FTM_COMBINE_WR(x, v) (HW_FTM_COMBINE(x).U = (v)) +#define HW_FTM_COMBINE_SET(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) | (v))) +#define HW_FTM_COMBINE_CLR(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) & ~(v))) +#define HW_FTM_COMBINE_TOG(x, v) (HW_FTM_COMBINE_WR(x, HW_FTM_COMBINE_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_COMBINE bitfields + */ + +/*! + * @name Register FTM_COMBINE, field COMBINE0[0] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMBINE0 (0U) /*!< Bit position for FTM_COMBINE_COMBINE0. */ +#define BM_FTM_COMBINE_COMBINE0 (0x00000001U) /*!< Bit mask for FTM_COMBINE_COMBINE0. */ +#define BS_FTM_COMBINE_COMBINE0 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMBINE0. */ + +/*! @brief Read current value of the FTM_COMBINE_COMBINE0 field. */ +#define BR_FTM_COMBINE_COMBINE0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMBINE0. */ +#define BF_FTM_COMBINE_COMBINE0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE0) & BM_FTM_COMBINE_COMBINE0) + +/*! @brief Set the COMBINE0 field to a new value. */ +#define BW_FTM_COMBINE_COMBINE0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMP0[1] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMP0 (1U) /*!< Bit position for FTM_COMBINE_COMP0. */ +#define BM_FTM_COMBINE_COMP0 (0x00000002U) /*!< Bit mask for FTM_COMBINE_COMP0. */ +#define BS_FTM_COMBINE_COMP0 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMP0. */ + +/*! @brief Read current value of the FTM_COMBINE_COMP0 field. */ +#define BR_FTM_COMBINE_COMP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMP0. */ +#define BF_FTM_COMBINE_COMP0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP0) & BM_FTM_COMBINE_COMP0) + +/*! @brief Set the COMP0 field to a new value. */ +#define BW_FTM_COMBINE_COMP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAPEN0[2] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAPEN0 (2U) /*!< Bit position for FTM_COMBINE_DECAPEN0. */ +#define BM_FTM_COMBINE_DECAPEN0 (0x00000004U) /*!< Bit mask for FTM_COMBINE_DECAPEN0. */ +#define BS_FTM_COMBINE_DECAPEN0 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAPEN0. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAPEN0 field. */ +#define BR_FTM_COMBINE_DECAPEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN0. */ +#define BF_FTM_COMBINE_DECAPEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN0) & BM_FTM_COMBINE_DECAPEN0) + +/*! @brief Set the DECAPEN0 field to a new value. */ +#define BW_FTM_COMBINE_DECAPEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAP0[3] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAP0 (3U) /*!< Bit position for FTM_COMBINE_DECAP0. */ +#define BM_FTM_COMBINE_DECAP0 (0x00000008U) /*!< Bit mask for FTM_COMBINE_DECAP0. */ +#define BS_FTM_COMBINE_DECAP0 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAP0. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAP0 field. */ +#define BR_FTM_COMBINE_DECAP0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAP0. */ +#define BF_FTM_COMBINE_DECAP0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP0) & BM_FTM_COMBINE_DECAP0) + +/*! @brief Set the DECAP0 field to a new value. */ +#define BW_FTM_COMBINE_DECAP0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DTEN0[4] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DTEN0 (4U) /*!< Bit position for FTM_COMBINE_DTEN0. */ +#define BM_FTM_COMBINE_DTEN0 (0x00000010U) /*!< Bit mask for FTM_COMBINE_DTEN0. */ +#define BS_FTM_COMBINE_DTEN0 (1U) /*!< Bit field size in bits for FTM_COMBINE_DTEN0. */ + +/*! @brief Read current value of the FTM_COMBINE_DTEN0 field. */ +#define BR_FTM_COMBINE_DTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0)) + +/*! @brief Format value for bitfield FTM_COMBINE_DTEN0. */ +#define BF_FTM_COMBINE_DTEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN0) & BM_FTM_COMBINE_DTEN0) + +/*! @brief Set the DTEN0 field to a new value. */ +#define BW_FTM_COMBINE_DTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field SYNCEN0[5] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_SYNCEN0 (5U) /*!< Bit position for FTM_COMBINE_SYNCEN0. */ +#define BM_FTM_COMBINE_SYNCEN0 (0x00000020U) /*!< Bit mask for FTM_COMBINE_SYNCEN0. */ +#define BS_FTM_COMBINE_SYNCEN0 (1U) /*!< Bit field size in bits for FTM_COMBINE_SYNCEN0. */ + +/*! @brief Read current value of the FTM_COMBINE_SYNCEN0 field. */ +#define BR_FTM_COMBINE_SYNCEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0)) + +/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN0. */ +#define BF_FTM_COMBINE_SYNCEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN0) & BM_FTM_COMBINE_SYNCEN0) + +/*! @brief Set the SYNCEN0 field to a new value. */ +#define BW_FTM_COMBINE_SYNCEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field FAULTEN0[6] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_FAULTEN0 (6U) /*!< Bit position for FTM_COMBINE_FAULTEN0. */ +#define BM_FTM_COMBINE_FAULTEN0 (0x00000040U) /*!< Bit mask for FTM_COMBINE_FAULTEN0. */ +#define BS_FTM_COMBINE_FAULTEN0 (1U) /*!< Bit field size in bits for FTM_COMBINE_FAULTEN0. */ + +/*! @brief Read current value of the FTM_COMBINE_FAULTEN0 field. */ +#define BR_FTM_COMBINE_FAULTEN0(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0)) + +/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN0. */ +#define BF_FTM_COMBINE_FAULTEN0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN0) & BM_FTM_COMBINE_FAULTEN0) + +/*! @brief Set the FAULTEN0 field to a new value. */ +#define BW_FTM_COMBINE_FAULTEN0(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMBINE1[8] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMBINE1 (8U) /*!< Bit position for FTM_COMBINE_COMBINE1. */ +#define BM_FTM_COMBINE_COMBINE1 (0x00000100U) /*!< Bit mask for FTM_COMBINE_COMBINE1. */ +#define BS_FTM_COMBINE_COMBINE1 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMBINE1. */ + +/*! @brief Read current value of the FTM_COMBINE_COMBINE1 field. */ +#define BR_FTM_COMBINE_COMBINE1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMBINE1. */ +#define BF_FTM_COMBINE_COMBINE1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE1) & BM_FTM_COMBINE_COMBINE1) + +/*! @brief Set the COMBINE1 field to a new value. */ +#define BW_FTM_COMBINE_COMBINE1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMP1[9] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMP1 (9U) /*!< Bit position for FTM_COMBINE_COMP1. */ +#define BM_FTM_COMBINE_COMP1 (0x00000200U) /*!< Bit mask for FTM_COMBINE_COMP1. */ +#define BS_FTM_COMBINE_COMP1 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMP1. */ + +/*! @brief Read current value of the FTM_COMBINE_COMP1 field. */ +#define BR_FTM_COMBINE_COMP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMP1. */ +#define BF_FTM_COMBINE_COMP1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP1) & BM_FTM_COMBINE_COMP1) + +/*! @brief Set the COMP1 field to a new value. */ +#define BW_FTM_COMBINE_COMP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAPEN1[10] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAPEN1 (10U) /*!< Bit position for FTM_COMBINE_DECAPEN1. */ +#define BM_FTM_COMBINE_DECAPEN1 (0x00000400U) /*!< Bit mask for FTM_COMBINE_DECAPEN1. */ +#define BS_FTM_COMBINE_DECAPEN1 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAPEN1. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAPEN1 field. */ +#define BR_FTM_COMBINE_DECAPEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN1. */ +#define BF_FTM_COMBINE_DECAPEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN1) & BM_FTM_COMBINE_DECAPEN1) + +/*! @brief Set the DECAPEN1 field to a new value. */ +#define BW_FTM_COMBINE_DECAPEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAP1[11] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if Dual Edge Capture - One-Shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAP1 (11U) /*!< Bit position for FTM_COMBINE_DECAP1. */ +#define BM_FTM_COMBINE_DECAP1 (0x00000800U) /*!< Bit mask for FTM_COMBINE_DECAP1. */ +#define BS_FTM_COMBINE_DECAP1 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAP1. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAP1 field. */ +#define BR_FTM_COMBINE_DECAP1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAP1. */ +#define BF_FTM_COMBINE_DECAP1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP1) & BM_FTM_COMBINE_DECAP1) + +/*! @brief Set the DECAP1 field to a new value. */ +#define BW_FTM_COMBINE_DECAP1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DTEN1[12] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DTEN1 (12U) /*!< Bit position for FTM_COMBINE_DTEN1. */ +#define BM_FTM_COMBINE_DTEN1 (0x00001000U) /*!< Bit mask for FTM_COMBINE_DTEN1. */ +#define BS_FTM_COMBINE_DTEN1 (1U) /*!< Bit field size in bits for FTM_COMBINE_DTEN1. */ + +/*! @brief Read current value of the FTM_COMBINE_DTEN1 field. */ +#define BR_FTM_COMBINE_DTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1)) + +/*! @brief Format value for bitfield FTM_COMBINE_DTEN1. */ +#define BF_FTM_COMBINE_DTEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN1) & BM_FTM_COMBINE_DTEN1) + +/*! @brief Set the DTEN1 field to a new value. */ +#define BW_FTM_COMBINE_DTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field SYNCEN1[13] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_SYNCEN1 (13U) /*!< Bit position for FTM_COMBINE_SYNCEN1. */ +#define BM_FTM_COMBINE_SYNCEN1 (0x00002000U) /*!< Bit mask for FTM_COMBINE_SYNCEN1. */ +#define BS_FTM_COMBINE_SYNCEN1 (1U) /*!< Bit field size in bits for FTM_COMBINE_SYNCEN1. */ + +/*! @brief Read current value of the FTM_COMBINE_SYNCEN1 field. */ +#define BR_FTM_COMBINE_SYNCEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1)) + +/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN1. */ +#define BF_FTM_COMBINE_SYNCEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN1) & BM_FTM_COMBINE_SYNCEN1) + +/*! @brief Set the SYNCEN1 field to a new value. */ +#define BW_FTM_COMBINE_SYNCEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field FAULTEN1[14] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_FAULTEN1 (14U) /*!< Bit position for FTM_COMBINE_FAULTEN1. */ +#define BM_FTM_COMBINE_FAULTEN1 (0x00004000U) /*!< Bit mask for FTM_COMBINE_FAULTEN1. */ +#define BS_FTM_COMBINE_FAULTEN1 (1U) /*!< Bit field size in bits for FTM_COMBINE_FAULTEN1. */ + +/*! @brief Read current value of the FTM_COMBINE_FAULTEN1 field. */ +#define BR_FTM_COMBINE_FAULTEN1(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1)) + +/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN1. */ +#define BF_FTM_COMBINE_FAULTEN1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN1) & BM_FTM_COMBINE_FAULTEN1) + +/*! @brief Set the FAULTEN1 field to a new value. */ +#define BW_FTM_COMBINE_FAULTEN1(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMBINE2[16] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMBINE2 (16U) /*!< Bit position for FTM_COMBINE_COMBINE2. */ +#define BM_FTM_COMBINE_COMBINE2 (0x00010000U) /*!< Bit mask for FTM_COMBINE_COMBINE2. */ +#define BS_FTM_COMBINE_COMBINE2 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMBINE2. */ + +/*! @brief Read current value of the FTM_COMBINE_COMBINE2 field. */ +#define BR_FTM_COMBINE_COMBINE2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMBINE2. */ +#define BF_FTM_COMBINE_COMBINE2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE2) & BM_FTM_COMBINE_COMBINE2) + +/*! @brief Set the COMBINE2 field to a new value. */ +#define BW_FTM_COMBINE_COMBINE2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMP2[17] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMP2 (17U) /*!< Bit position for FTM_COMBINE_COMP2. */ +#define BM_FTM_COMBINE_COMP2 (0x00020000U) /*!< Bit mask for FTM_COMBINE_COMP2. */ +#define BS_FTM_COMBINE_COMP2 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMP2. */ + +/*! @brief Read current value of the FTM_COMBINE_COMP2 field. */ +#define BR_FTM_COMBINE_COMP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMP2. */ +#define BF_FTM_COMBINE_COMP2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP2) & BM_FTM_COMBINE_COMP2) + +/*! @brief Set the COMP2 field to a new value. */ +#define BW_FTM_COMBINE_COMP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAPEN2[18] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAPEN2 (18U) /*!< Bit position for FTM_COMBINE_DECAPEN2. */ +#define BM_FTM_COMBINE_DECAPEN2 (0x00040000U) /*!< Bit mask for FTM_COMBINE_DECAPEN2. */ +#define BS_FTM_COMBINE_DECAPEN2 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAPEN2. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAPEN2 field. */ +#define BR_FTM_COMBINE_DECAPEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN2. */ +#define BF_FTM_COMBINE_DECAPEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN2) & BM_FTM_COMBINE_DECAPEN2) + +/*! @brief Set the DECAPEN2 field to a new value. */ +#define BW_FTM_COMBINE_DECAPEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAP2[19] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAP2 (19U) /*!< Bit position for FTM_COMBINE_DECAP2. */ +#define BM_FTM_COMBINE_DECAP2 (0x00080000U) /*!< Bit mask for FTM_COMBINE_DECAP2. */ +#define BS_FTM_COMBINE_DECAP2 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAP2. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAP2 field. */ +#define BR_FTM_COMBINE_DECAP2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAP2. */ +#define BF_FTM_COMBINE_DECAP2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP2) & BM_FTM_COMBINE_DECAP2) + +/*! @brief Set the DECAP2 field to a new value. */ +#define BW_FTM_COMBINE_DECAP2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DTEN2[20] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DTEN2 (20U) /*!< Bit position for FTM_COMBINE_DTEN2. */ +#define BM_FTM_COMBINE_DTEN2 (0x00100000U) /*!< Bit mask for FTM_COMBINE_DTEN2. */ +#define BS_FTM_COMBINE_DTEN2 (1U) /*!< Bit field size in bits for FTM_COMBINE_DTEN2. */ + +/*! @brief Read current value of the FTM_COMBINE_DTEN2 field. */ +#define BR_FTM_COMBINE_DTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2)) + +/*! @brief Format value for bitfield FTM_COMBINE_DTEN2. */ +#define BF_FTM_COMBINE_DTEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN2) & BM_FTM_COMBINE_DTEN2) + +/*! @brief Set the DTEN2 field to a new value. */ +#define BW_FTM_COMBINE_DTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field SYNCEN2[21] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_SYNCEN2 (21U) /*!< Bit position for FTM_COMBINE_SYNCEN2. */ +#define BM_FTM_COMBINE_SYNCEN2 (0x00200000U) /*!< Bit mask for FTM_COMBINE_SYNCEN2. */ +#define BS_FTM_COMBINE_SYNCEN2 (1U) /*!< Bit field size in bits for FTM_COMBINE_SYNCEN2. */ + +/*! @brief Read current value of the FTM_COMBINE_SYNCEN2 field. */ +#define BR_FTM_COMBINE_SYNCEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2)) + +/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN2. */ +#define BF_FTM_COMBINE_SYNCEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN2) & BM_FTM_COMBINE_SYNCEN2) + +/*! @brief Set the SYNCEN2 field to a new value. */ +#define BW_FTM_COMBINE_SYNCEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field FAULTEN2[22] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_FAULTEN2 (22U) /*!< Bit position for FTM_COMBINE_FAULTEN2. */ +#define BM_FTM_COMBINE_FAULTEN2 (0x00400000U) /*!< Bit mask for FTM_COMBINE_FAULTEN2. */ +#define BS_FTM_COMBINE_FAULTEN2 (1U) /*!< Bit field size in bits for FTM_COMBINE_FAULTEN2. */ + +/*! @brief Read current value of the FTM_COMBINE_FAULTEN2 field. */ +#define BR_FTM_COMBINE_FAULTEN2(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2)) + +/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN2. */ +#define BF_FTM_COMBINE_FAULTEN2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN2) & BM_FTM_COMBINE_FAULTEN2) + +/*! @brief Set the FAULTEN2 field to a new value. */ +#define BW_FTM_COMBINE_FAULTEN2(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMBINE3[24] (RW) + * + * Enables the combine feature for channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Channels (n) and (n+1) are independent. + * - 1 - Channels (n) and (n+1) are combined. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMBINE3 (24U) /*!< Bit position for FTM_COMBINE_COMBINE3. */ +#define BM_FTM_COMBINE_COMBINE3 (0x01000000U) /*!< Bit mask for FTM_COMBINE_COMBINE3. */ +#define BS_FTM_COMBINE_COMBINE3 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMBINE3. */ + +/*! @brief Read current value of the FTM_COMBINE_COMBINE3 field. */ +#define BR_FTM_COMBINE_COMBINE3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMBINE3. */ +#define BF_FTM_COMBINE_COMBINE3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMBINE3) & BM_FTM_COMBINE_COMBINE3) + +/*! @brief Set the COMBINE3 field to a new value. */ +#define BW_FTM_COMBINE_COMBINE3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMBINE3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field COMP3[25] (RW) + * + * Enables Complementary mode for the combined channels. In Complementary mode + * the channel (n+1) output is the inverse of the channel (n) output. This field + * is write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel (n+1) output is the same as the channel (n) output. + * - 1 - The channel (n+1) output is the complement of the channel (n) output. + */ +/*@{*/ +#define BP_FTM_COMBINE_COMP3 (25U) /*!< Bit position for FTM_COMBINE_COMP3. */ +#define BM_FTM_COMBINE_COMP3 (0x02000000U) /*!< Bit mask for FTM_COMBINE_COMP3. */ +#define BS_FTM_COMBINE_COMP3 (1U) /*!< Bit field size in bits for FTM_COMBINE_COMP3. */ + +/*! @brief Read current value of the FTM_COMBINE_COMP3 field. */ +#define BR_FTM_COMBINE_COMP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3)) + +/*! @brief Format value for bitfield FTM_COMBINE_COMP3. */ +#define BF_FTM_COMBINE_COMP3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_COMP3) & BM_FTM_COMBINE_COMP3) + +/*! @brief Set the COMP3 field to a new value. */ +#define BW_FTM_COMBINE_COMP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_COMP3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAPEN3[26] (RW) + * + * Enables the Dual Edge Capture mode in the channels (n) and (n+1). This bit + * reconfigures the function of MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in + * Dual Edge Capture mode according to #ModeSel1Table. This field applies only + * when FTMEN = 1. This field is write protected. It can be written only when + * MODE[WPDIS] = 1. + * + * Values: + * - 0 - The Dual Edge Capture mode in this pair of channels is disabled. + * - 1 - The Dual Edge Capture mode in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAPEN3 (26U) /*!< Bit position for FTM_COMBINE_DECAPEN3. */ +#define BM_FTM_COMBINE_DECAPEN3 (0x04000000U) /*!< Bit mask for FTM_COMBINE_DECAPEN3. */ +#define BS_FTM_COMBINE_DECAPEN3 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAPEN3. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAPEN3 field. */ +#define BR_FTM_COMBINE_DECAPEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAPEN3. */ +#define BF_FTM_COMBINE_DECAPEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAPEN3) & BM_FTM_COMBINE_DECAPEN3) + +/*! @brief Set the DECAPEN3 field to a new value. */ +#define BW_FTM_COMBINE_DECAPEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAPEN3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DECAP3[27] (RW) + * + * Enables the capture of the FTM counter value according to the channel (n) + * input event and the configuration of the dual edge capture bits. This field + * applies only when FTMEN = 1 and DECAPEN = 1. DECAP bit is cleared automatically by + * hardware if dual edge capture - one-shot mode is selected and when the capture + * of channel (n+1) event is made. + * + * Values: + * - 0 - The dual edge captures are inactive. + * - 1 - The dual edge captures are active. + */ +/*@{*/ +#define BP_FTM_COMBINE_DECAP3 (27U) /*!< Bit position for FTM_COMBINE_DECAP3. */ +#define BM_FTM_COMBINE_DECAP3 (0x08000000U) /*!< Bit mask for FTM_COMBINE_DECAP3. */ +#define BS_FTM_COMBINE_DECAP3 (1U) /*!< Bit field size in bits for FTM_COMBINE_DECAP3. */ + +/*! @brief Read current value of the FTM_COMBINE_DECAP3 field. */ +#define BR_FTM_COMBINE_DECAP3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3)) + +/*! @brief Format value for bitfield FTM_COMBINE_DECAP3. */ +#define BF_FTM_COMBINE_DECAP3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DECAP3) & BM_FTM_COMBINE_DECAP3) + +/*! @brief Set the DECAP3 field to a new value. */ +#define BW_FTM_COMBINE_DECAP3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DECAP3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field DTEN3[28] (RW) + * + * Enables the deadtime insertion in the channels (n) and (n+1). This field is + * write protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The deadtime insertion in this pair of channels is disabled. + * - 1 - The deadtime insertion in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_DTEN3 (28U) /*!< Bit position for FTM_COMBINE_DTEN3. */ +#define BM_FTM_COMBINE_DTEN3 (0x10000000U) /*!< Bit mask for FTM_COMBINE_DTEN3. */ +#define BS_FTM_COMBINE_DTEN3 (1U) /*!< Bit field size in bits for FTM_COMBINE_DTEN3. */ + +/*! @brief Read current value of the FTM_COMBINE_DTEN3 field. */ +#define BR_FTM_COMBINE_DTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3)) + +/*! @brief Format value for bitfield FTM_COMBINE_DTEN3. */ +#define BF_FTM_COMBINE_DTEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_DTEN3) & BM_FTM_COMBINE_DTEN3) + +/*! @brief Set the DTEN3 field to a new value. */ +#define BW_FTM_COMBINE_DTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_DTEN3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field SYNCEN3[29] (RW) + * + * Enables PWM synchronization of registers C(n)V and C(n+1)V. + * + * Values: + * - 0 - The PWM synchronization in this pair of channels is disabled. + * - 1 - The PWM synchronization in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_SYNCEN3 (29U) /*!< Bit position for FTM_COMBINE_SYNCEN3. */ +#define BM_FTM_COMBINE_SYNCEN3 (0x20000000U) /*!< Bit mask for FTM_COMBINE_SYNCEN3. */ +#define BS_FTM_COMBINE_SYNCEN3 (1U) /*!< Bit field size in bits for FTM_COMBINE_SYNCEN3. */ + +/*! @brief Read current value of the FTM_COMBINE_SYNCEN3 field. */ +#define BR_FTM_COMBINE_SYNCEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3)) + +/*! @brief Format value for bitfield FTM_COMBINE_SYNCEN3. */ +#define BF_FTM_COMBINE_SYNCEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_SYNCEN3) & BM_FTM_COMBINE_SYNCEN3) + +/*! @brief Set the SYNCEN3 field to a new value. */ +#define BW_FTM_COMBINE_SYNCEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_SYNCEN3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_COMBINE, field FAULTEN3[30] (RW) + * + * Enables the fault control in channels (n) and (n+1). This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault control in this pair of channels is disabled. + * - 1 - The fault control in this pair of channels is enabled. + */ +/*@{*/ +#define BP_FTM_COMBINE_FAULTEN3 (30U) /*!< Bit position for FTM_COMBINE_FAULTEN3. */ +#define BM_FTM_COMBINE_FAULTEN3 (0x40000000U) /*!< Bit mask for FTM_COMBINE_FAULTEN3. */ +#define BS_FTM_COMBINE_FAULTEN3 (1U) /*!< Bit field size in bits for FTM_COMBINE_FAULTEN3. */ + +/*! @brief Read current value of the FTM_COMBINE_FAULTEN3 field. */ +#define BR_FTM_COMBINE_FAULTEN3(x) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3)) + +/*! @brief Format value for bitfield FTM_COMBINE_FAULTEN3. */ +#define BF_FTM_COMBINE_FAULTEN3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_COMBINE_FAULTEN3) & BM_FTM_COMBINE_FAULTEN3) + +/*! @brief Set the FAULTEN3 field to a new value. */ +#define BW_FTM_COMBINE_FAULTEN3(x, v) (BITBAND_ACCESS32(HW_FTM_COMBINE_ADDR(x), BP_FTM_COMBINE_FAULTEN3) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_DEADTIME - Deadtime Insertion Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_DEADTIME - Deadtime Insertion Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the deadtime prescaler factor and deadtime value. All + * FTM channels use this clock prescaler and this deadtime value for the deadtime + * insertion. + */ +typedef union _hw_ftm_deadtime +{ + uint32_t U; + struct _hw_ftm_deadtime_bitfields + { + uint32_t DTVAL : 6; /*!< [5:0] Deadtime Value */ + uint32_t DTPS : 2; /*!< [7:6] Deadtime Prescaler Value */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_deadtime_t; + +/*! + * @name Constants and macros for entire FTM_DEADTIME register + */ +/*@{*/ +#define HW_FTM_DEADTIME_ADDR(x) ((x) + 0x68U) + +#define HW_FTM_DEADTIME(x) (*(__IO hw_ftm_deadtime_t *) HW_FTM_DEADTIME_ADDR(x)) +#define HW_FTM_DEADTIME_RD(x) (HW_FTM_DEADTIME(x).U) +#define HW_FTM_DEADTIME_WR(x, v) (HW_FTM_DEADTIME(x).U = (v)) +#define HW_FTM_DEADTIME_SET(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) | (v))) +#define HW_FTM_DEADTIME_CLR(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) & ~(v))) +#define HW_FTM_DEADTIME_TOG(x, v) (HW_FTM_DEADTIME_WR(x, HW_FTM_DEADTIME_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_DEADTIME bitfields + */ + +/*! + * @name Register FTM_DEADTIME, field DTVAL[5:0] (RW) + * + * Selects the deadtime insertion value for the deadtime counter. The deadtime + * counter is clocked by a scaled version of the system clock. See the description + * of DTPS. Deadtime insert value = (DTPS * DTVAL). DTVAL selects the number of + * deadtime counts inserted as follows: When DTVAL is 0, no counts are inserted. + * When DTVAL is 1, 1 count is inserted. When DTVAL is 2, 2 counts are inserted. + * This pattern continues up to a possible 63 counts. This field is write + * protected. It can be written only when MODE[WPDIS] = 1. + */ +/*@{*/ +#define BP_FTM_DEADTIME_DTVAL (0U) /*!< Bit position for FTM_DEADTIME_DTVAL. */ +#define BM_FTM_DEADTIME_DTVAL (0x0000003FU) /*!< Bit mask for FTM_DEADTIME_DTVAL. */ +#define BS_FTM_DEADTIME_DTVAL (6U) /*!< Bit field size in bits for FTM_DEADTIME_DTVAL. */ + +/*! @brief Read current value of the FTM_DEADTIME_DTVAL field. */ +#define BR_FTM_DEADTIME_DTVAL(x) (HW_FTM_DEADTIME(x).B.DTVAL) + +/*! @brief Format value for bitfield FTM_DEADTIME_DTVAL. */ +#define BF_FTM_DEADTIME_DTVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_DEADTIME_DTVAL) & BM_FTM_DEADTIME_DTVAL) + +/*! @brief Set the DTVAL field to a new value. */ +#define BW_FTM_DEADTIME_DTVAL(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTVAL) | BF_FTM_DEADTIME_DTVAL(v))) +/*@}*/ + +/*! + * @name Register FTM_DEADTIME, field DTPS[7:6] (RW) + * + * Selects the division factor of the system clock. This prescaled clock is used + * by the deadtime counter. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0x - Divide the system clock by 1. + * - 10 - Divide the system clock by 4. + * - 11 - Divide the system clock by 16. + */ +/*@{*/ +#define BP_FTM_DEADTIME_DTPS (6U) /*!< Bit position for FTM_DEADTIME_DTPS. */ +#define BM_FTM_DEADTIME_DTPS (0x000000C0U) /*!< Bit mask for FTM_DEADTIME_DTPS. */ +#define BS_FTM_DEADTIME_DTPS (2U) /*!< Bit field size in bits for FTM_DEADTIME_DTPS. */ + +/*! @brief Read current value of the FTM_DEADTIME_DTPS field. */ +#define BR_FTM_DEADTIME_DTPS(x) (HW_FTM_DEADTIME(x).B.DTPS) + +/*! @brief Format value for bitfield FTM_DEADTIME_DTPS. */ +#define BF_FTM_DEADTIME_DTPS(v) ((uint32_t)((uint32_t)(v) << BP_FTM_DEADTIME_DTPS) & BM_FTM_DEADTIME_DTPS) + +/*! @brief Set the DTPS field to a new value. */ +#define BW_FTM_DEADTIME_DTPS(x, v) (HW_FTM_DEADTIME_WR(x, (HW_FTM_DEADTIME_RD(x) & ~BM_FTM_DEADTIME_DTPS) | BF_FTM_DEADTIME_DTPS(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_EXTTRIG - FTM External Trigger + ******************************************************************************/ + +/*! + * @brief HW_FTM_EXTTRIG - FTM External Trigger (RW) + * + * Reset value: 0x00000000U + * + * This register: Indicates when a channel trigger was generated Enables the + * generation of a trigger when the FTM counter is equal to its initial value + * Selects which channels are used in the generation of the channel triggers Several + * channels can be selected to generate multiple triggers in one PWM period. + * Channels 6 and 7 are not used to generate channel triggers. + */ +typedef union _hw_ftm_exttrig +{ + uint32_t U; + struct _hw_ftm_exttrig_bitfields + { + uint32_t CH2TRIG : 1; /*!< [0] Channel 2 Trigger Enable */ + uint32_t CH3TRIG : 1; /*!< [1] Channel 3 Trigger Enable */ + uint32_t CH4TRIG : 1; /*!< [2] Channel 4 Trigger Enable */ + uint32_t CH5TRIG : 1; /*!< [3] Channel 5 Trigger Enable */ + uint32_t CH0TRIG : 1; /*!< [4] Channel 0 Trigger Enable */ + uint32_t CH1TRIG : 1; /*!< [5] Channel 1 Trigger Enable */ + uint32_t INITTRIGEN : 1; /*!< [6] Initialization Trigger Enable */ + uint32_t TRIGF : 1; /*!< [7] Channel Trigger Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_exttrig_t; + +/*! + * @name Constants and macros for entire FTM_EXTTRIG register + */ +/*@{*/ +#define HW_FTM_EXTTRIG_ADDR(x) ((x) + 0x6CU) + +#define HW_FTM_EXTTRIG(x) (*(__IO hw_ftm_exttrig_t *) HW_FTM_EXTTRIG_ADDR(x)) +#define HW_FTM_EXTTRIG_RD(x) (HW_FTM_EXTTRIG(x).U) +#define HW_FTM_EXTTRIG_WR(x, v) (HW_FTM_EXTTRIG(x).U = (v)) +#define HW_FTM_EXTTRIG_SET(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) | (v))) +#define HW_FTM_EXTTRIG_CLR(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) & ~(v))) +#define HW_FTM_EXTTRIG_TOG(x, v) (HW_FTM_EXTTRIG_WR(x, HW_FTM_EXTTRIG_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_EXTTRIG bitfields + */ + +/*! + * @name Register FTM_EXTTRIG, field CH2TRIG[0] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH2TRIG (0U) /*!< Bit position for FTM_EXTTRIG_CH2TRIG. */ +#define BM_FTM_EXTTRIG_CH2TRIG (0x00000001U) /*!< Bit mask for FTM_EXTTRIG_CH2TRIG. */ +#define BS_FTM_EXTTRIG_CH2TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH2TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH2TRIG field. */ +#define BR_FTM_EXTTRIG_CH2TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH2TRIG. */ +#define BF_FTM_EXTTRIG_CH2TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH2TRIG) & BM_FTM_EXTTRIG_CH2TRIG) + +/*! @brief Set the CH2TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH2TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH2TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field CH3TRIG[1] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH3TRIG (1U) /*!< Bit position for FTM_EXTTRIG_CH3TRIG. */ +#define BM_FTM_EXTTRIG_CH3TRIG (0x00000002U) /*!< Bit mask for FTM_EXTTRIG_CH3TRIG. */ +#define BS_FTM_EXTTRIG_CH3TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH3TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH3TRIG field. */ +#define BR_FTM_EXTTRIG_CH3TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH3TRIG. */ +#define BF_FTM_EXTTRIG_CH3TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH3TRIG) & BM_FTM_EXTTRIG_CH3TRIG) + +/*! @brief Set the CH3TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH3TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH3TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field CH4TRIG[2] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH4TRIG (2U) /*!< Bit position for FTM_EXTTRIG_CH4TRIG. */ +#define BM_FTM_EXTTRIG_CH4TRIG (0x00000004U) /*!< Bit mask for FTM_EXTTRIG_CH4TRIG. */ +#define BS_FTM_EXTTRIG_CH4TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH4TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH4TRIG field. */ +#define BR_FTM_EXTTRIG_CH4TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH4TRIG. */ +#define BF_FTM_EXTTRIG_CH4TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH4TRIG) & BM_FTM_EXTTRIG_CH4TRIG) + +/*! @brief Set the CH4TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH4TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH4TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field CH5TRIG[3] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH5TRIG (3U) /*!< Bit position for FTM_EXTTRIG_CH5TRIG. */ +#define BM_FTM_EXTTRIG_CH5TRIG (0x00000008U) /*!< Bit mask for FTM_EXTTRIG_CH5TRIG. */ +#define BS_FTM_EXTTRIG_CH5TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH5TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH5TRIG field. */ +#define BR_FTM_EXTTRIG_CH5TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH5TRIG. */ +#define BF_FTM_EXTTRIG_CH5TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH5TRIG) & BM_FTM_EXTTRIG_CH5TRIG) + +/*! @brief Set the CH5TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH5TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH5TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field CH0TRIG[4] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH0TRIG (4U) /*!< Bit position for FTM_EXTTRIG_CH0TRIG. */ +#define BM_FTM_EXTTRIG_CH0TRIG (0x00000010U) /*!< Bit mask for FTM_EXTTRIG_CH0TRIG. */ +#define BS_FTM_EXTTRIG_CH0TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH0TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH0TRIG field. */ +#define BR_FTM_EXTTRIG_CH0TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH0TRIG. */ +#define BF_FTM_EXTTRIG_CH0TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH0TRIG) & BM_FTM_EXTTRIG_CH0TRIG) + +/*! @brief Set the CH0TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH0TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH0TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field CH1TRIG[5] (RW) + * + * Enables the generation of the channel trigger when the FTM counter is equal + * to the CnV register. + * + * Values: + * - 0 - The generation of the channel trigger is disabled. + * - 1 - The generation of the channel trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_CH1TRIG (5U) /*!< Bit position for FTM_EXTTRIG_CH1TRIG. */ +#define BM_FTM_EXTTRIG_CH1TRIG (0x00000020U) /*!< Bit mask for FTM_EXTTRIG_CH1TRIG. */ +#define BS_FTM_EXTTRIG_CH1TRIG (1U) /*!< Bit field size in bits for FTM_EXTTRIG_CH1TRIG. */ + +/*! @brief Read current value of the FTM_EXTTRIG_CH1TRIG field. */ +#define BR_FTM_EXTTRIG_CH1TRIG(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_CH1TRIG. */ +#define BF_FTM_EXTTRIG_CH1TRIG(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_CH1TRIG) & BM_FTM_EXTTRIG_CH1TRIG) + +/*! @brief Set the CH1TRIG field to a new value. */ +#define BW_FTM_EXTTRIG_CH1TRIG(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_CH1TRIG) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field INITTRIGEN[6] (RW) + * + * Enables the generation of the trigger when the FTM counter is equal to the + * CNTIN register. + * + * Values: + * - 0 - The generation of initialization trigger is disabled. + * - 1 - The generation of initialization trigger is enabled. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_INITTRIGEN (6U) /*!< Bit position for FTM_EXTTRIG_INITTRIGEN. */ +#define BM_FTM_EXTTRIG_INITTRIGEN (0x00000040U) /*!< Bit mask for FTM_EXTTRIG_INITTRIGEN. */ +#define BS_FTM_EXTTRIG_INITTRIGEN (1U) /*!< Bit field size in bits for FTM_EXTTRIG_INITTRIGEN. */ + +/*! @brief Read current value of the FTM_EXTTRIG_INITTRIGEN field. */ +#define BR_FTM_EXTTRIG_INITTRIGEN(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_INITTRIGEN. */ +#define BF_FTM_EXTTRIG_INITTRIGEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_INITTRIGEN) & BM_FTM_EXTTRIG_INITTRIGEN) + +/*! @brief Set the INITTRIGEN field to a new value. */ +#define BW_FTM_EXTTRIG_INITTRIGEN(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_INITTRIGEN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_EXTTRIG, field TRIGF[7] (ROWZ) + * + * Set by hardware when a channel trigger is generated. Clear TRIGF by reading + * EXTTRIG while TRIGF is set and then writing a 0 to TRIGF. Writing a 1 to TRIGF + * has no effect. If another channel trigger is generated before the clearing + * sequence is completed, the sequence is reset so TRIGF remains set after the clear + * sequence is completed for the earlier TRIGF. + * + * Values: + * - 0 - No channel trigger was generated. + * - 1 - A channel trigger was generated. + */ +/*@{*/ +#define BP_FTM_EXTTRIG_TRIGF (7U) /*!< Bit position for FTM_EXTTRIG_TRIGF. */ +#define BM_FTM_EXTTRIG_TRIGF (0x00000080U) /*!< Bit mask for FTM_EXTTRIG_TRIGF. */ +#define BS_FTM_EXTTRIG_TRIGF (1U) /*!< Bit field size in bits for FTM_EXTTRIG_TRIGF. */ + +/*! @brief Read current value of the FTM_EXTTRIG_TRIGF field. */ +#define BR_FTM_EXTTRIG_TRIGF(x) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_TRIGF)) + +/*! @brief Format value for bitfield FTM_EXTTRIG_TRIGF. */ +#define BF_FTM_EXTTRIG_TRIGF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_EXTTRIG_TRIGF) & BM_FTM_EXTTRIG_TRIGF) + +/*! @brief Set the TRIGF field to a new value. */ +#define BW_FTM_EXTTRIG_TRIGF(x, v) (BITBAND_ACCESS32(HW_FTM_EXTTRIG_ADDR(x), BP_FTM_EXTTRIG_TRIGF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_POL - Channels Polarity + ******************************************************************************/ + +/*! + * @brief HW_FTM_POL - Channels Polarity (RW) + * + * Reset value: 0x00000000U + * + * This register defines the output polarity of the FTM channels. The safe value + * that is driven in a channel output when the fault control is enabled and a + * fault condition is detected is the inactive state of the channel. That is, the + * safe value of a channel is the value of its POL bit. + */ +typedef union _hw_ftm_pol +{ + uint32_t U; + struct _hw_ftm_pol_bitfields + { + uint32_t POL0 : 1; /*!< [0] Channel 0 Polarity */ + uint32_t POL1 : 1; /*!< [1] Channel 1 Polarity */ + uint32_t POL2 : 1; /*!< [2] Channel 2 Polarity */ + uint32_t POL3 : 1; /*!< [3] Channel 3 Polarity */ + uint32_t POL4 : 1; /*!< [4] Channel 4 Polarity */ + uint32_t POL5 : 1; /*!< [5] Channel 5 Polarity */ + uint32_t POL6 : 1; /*!< [6] Channel 6 Polarity */ + uint32_t POL7 : 1; /*!< [7] Channel 7 Polarity */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_pol_t; + +/*! + * @name Constants and macros for entire FTM_POL register + */ +/*@{*/ +#define HW_FTM_POL_ADDR(x) ((x) + 0x70U) + +#define HW_FTM_POL(x) (*(__IO hw_ftm_pol_t *) HW_FTM_POL_ADDR(x)) +#define HW_FTM_POL_RD(x) (HW_FTM_POL(x).U) +#define HW_FTM_POL_WR(x, v) (HW_FTM_POL(x).U = (v)) +#define HW_FTM_POL_SET(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) | (v))) +#define HW_FTM_POL_CLR(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) & ~(v))) +#define HW_FTM_POL_TOG(x, v) (HW_FTM_POL_WR(x, HW_FTM_POL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_POL bitfields + */ + +/*! + * @name Register FTM_POL, field POL0[0] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL0 (0U) /*!< Bit position for FTM_POL_POL0. */ +#define BM_FTM_POL_POL0 (0x00000001U) /*!< Bit mask for FTM_POL_POL0. */ +#define BS_FTM_POL_POL0 (1U) /*!< Bit field size in bits for FTM_POL_POL0. */ + +/*! @brief Read current value of the FTM_POL_POL0 field. */ +#define BR_FTM_POL_POL0(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0)) + +/*! @brief Format value for bitfield FTM_POL_POL0. */ +#define BF_FTM_POL_POL0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL0) & BM_FTM_POL_POL0) + +/*! @brief Set the POL0 field to a new value. */ +#define BW_FTM_POL_POL0(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL1[1] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL1 (1U) /*!< Bit position for FTM_POL_POL1. */ +#define BM_FTM_POL_POL1 (0x00000002U) /*!< Bit mask for FTM_POL_POL1. */ +#define BS_FTM_POL_POL1 (1U) /*!< Bit field size in bits for FTM_POL_POL1. */ + +/*! @brief Read current value of the FTM_POL_POL1 field. */ +#define BR_FTM_POL_POL1(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1)) + +/*! @brief Format value for bitfield FTM_POL_POL1. */ +#define BF_FTM_POL_POL1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL1) & BM_FTM_POL_POL1) + +/*! @brief Set the POL1 field to a new value. */ +#define BW_FTM_POL_POL1(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL2[2] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL2 (2U) /*!< Bit position for FTM_POL_POL2. */ +#define BM_FTM_POL_POL2 (0x00000004U) /*!< Bit mask for FTM_POL_POL2. */ +#define BS_FTM_POL_POL2 (1U) /*!< Bit field size in bits for FTM_POL_POL2. */ + +/*! @brief Read current value of the FTM_POL_POL2 field. */ +#define BR_FTM_POL_POL2(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2)) + +/*! @brief Format value for bitfield FTM_POL_POL2. */ +#define BF_FTM_POL_POL2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL2) & BM_FTM_POL_POL2) + +/*! @brief Set the POL2 field to a new value. */ +#define BW_FTM_POL_POL2(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL3[3] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL3 (3U) /*!< Bit position for FTM_POL_POL3. */ +#define BM_FTM_POL_POL3 (0x00000008U) /*!< Bit mask for FTM_POL_POL3. */ +#define BS_FTM_POL_POL3 (1U) /*!< Bit field size in bits for FTM_POL_POL3. */ + +/*! @brief Read current value of the FTM_POL_POL3 field. */ +#define BR_FTM_POL_POL3(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3)) + +/*! @brief Format value for bitfield FTM_POL_POL3. */ +#define BF_FTM_POL_POL3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL3) & BM_FTM_POL_POL3) + +/*! @brief Set the POL3 field to a new value. */ +#define BW_FTM_POL_POL3(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL4[4] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL4 (4U) /*!< Bit position for FTM_POL_POL4. */ +#define BM_FTM_POL_POL4 (0x00000010U) /*!< Bit mask for FTM_POL_POL4. */ +#define BS_FTM_POL_POL4 (1U) /*!< Bit field size in bits for FTM_POL_POL4. */ + +/*! @brief Read current value of the FTM_POL_POL4 field. */ +#define BR_FTM_POL_POL4(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4)) + +/*! @brief Format value for bitfield FTM_POL_POL4. */ +#define BF_FTM_POL_POL4(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL4) & BM_FTM_POL_POL4) + +/*! @brief Set the POL4 field to a new value. */ +#define BW_FTM_POL_POL4(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL4) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL5[5] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL5 (5U) /*!< Bit position for FTM_POL_POL5. */ +#define BM_FTM_POL_POL5 (0x00000020U) /*!< Bit mask for FTM_POL_POL5. */ +#define BS_FTM_POL_POL5 (1U) /*!< Bit field size in bits for FTM_POL_POL5. */ + +/*! @brief Read current value of the FTM_POL_POL5 field. */ +#define BR_FTM_POL_POL5(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5)) + +/*! @brief Format value for bitfield FTM_POL_POL5. */ +#define BF_FTM_POL_POL5(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL5) & BM_FTM_POL_POL5) + +/*! @brief Set the POL5 field to a new value. */ +#define BW_FTM_POL_POL5(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL5) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL6[6] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL6 (6U) /*!< Bit position for FTM_POL_POL6. */ +#define BM_FTM_POL_POL6 (0x00000040U) /*!< Bit mask for FTM_POL_POL6. */ +#define BS_FTM_POL_POL6 (1U) /*!< Bit field size in bits for FTM_POL_POL6. */ + +/*! @brief Read current value of the FTM_POL_POL6 field. */ +#define BR_FTM_POL_POL6(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6)) + +/*! @brief Format value for bitfield FTM_POL_POL6. */ +#define BF_FTM_POL_POL6(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL6) & BM_FTM_POL_POL6) + +/*! @brief Set the POL6 field to a new value. */ +#define BW_FTM_POL_POL6(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL6) = (v)) +/*@}*/ + +/*! + * @name Register FTM_POL, field POL7[7] (RW) + * + * Defines the polarity of the channel output. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The channel polarity is active high. + * - 1 - The channel polarity is active low. + */ +/*@{*/ +#define BP_FTM_POL_POL7 (7U) /*!< Bit position for FTM_POL_POL7. */ +#define BM_FTM_POL_POL7 (0x00000080U) /*!< Bit mask for FTM_POL_POL7. */ +#define BS_FTM_POL_POL7 (1U) /*!< Bit field size in bits for FTM_POL_POL7. */ + +/*! @brief Read current value of the FTM_POL_POL7 field. */ +#define BR_FTM_POL_POL7(x) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7)) + +/*! @brief Format value for bitfield FTM_POL_POL7. */ +#define BF_FTM_POL_POL7(v) ((uint32_t)((uint32_t)(v) << BP_FTM_POL_POL7) & BM_FTM_POL_POL7) + +/*! @brief Set the POL7 field to a new value. */ +#define BW_FTM_POL_POL7(x, v) (BITBAND_ACCESS32(HW_FTM_POL_ADDR(x), BP_FTM_POL_POL7) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_FMS - Fault Mode Status + ******************************************************************************/ + +/*! + * @brief HW_FTM_FMS - Fault Mode Status (RW) + * + * Reset value: 0x00000000U + * + * This register contains the fault detection flags, write protection enable + * bit, and the logic OR of the enabled fault inputs. + */ +typedef union _hw_ftm_fms +{ + uint32_t U; + struct _hw_ftm_fms_bitfields + { + uint32_t FAULTF0 : 1; /*!< [0] Fault Detection Flag 0 */ + uint32_t FAULTF1 : 1; /*!< [1] Fault Detection Flag 1 */ + uint32_t FAULTF2 : 1; /*!< [2] Fault Detection Flag 2 */ + uint32_t FAULTF3 : 1; /*!< [3] Fault Detection Flag 3 */ + uint32_t RESERVED0 : 1; /*!< [4] */ + uint32_t FAULTIN : 1; /*!< [5] Fault Inputs */ + uint32_t WPEN : 1; /*!< [6] Write Protection Enable */ + uint32_t FAULTF : 1; /*!< [7] Fault Detection Flag */ + uint32_t RESERVED1 : 24; /*!< [31:8] */ + } B; +} hw_ftm_fms_t; + +/*! + * @name Constants and macros for entire FTM_FMS register + */ +/*@{*/ +#define HW_FTM_FMS_ADDR(x) ((x) + 0x74U) + +#define HW_FTM_FMS(x) (*(__IO hw_ftm_fms_t *) HW_FTM_FMS_ADDR(x)) +#define HW_FTM_FMS_RD(x) (HW_FTM_FMS(x).U) +#define HW_FTM_FMS_WR(x, v) (HW_FTM_FMS(x).U = (v)) +#define HW_FTM_FMS_SET(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) | (v))) +#define HW_FTM_FMS_CLR(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) & ~(v))) +#define HW_FTM_FMS_TOG(x, v) (HW_FTM_FMS_WR(x, HW_FTM_FMS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_FMS bitfields + */ + +/*! + * @name Register FTM_FMS, field FAULTF0[0] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF0 + * by reading the FMS register while FAULTF0 is set and then writing a 0 to + * FAULTF0 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF0 has no effect. FAULTF0 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF0 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTF0 (0U) /*!< Bit position for FTM_FMS_FAULTF0. */ +#define BM_FTM_FMS_FAULTF0 (0x00000001U) /*!< Bit mask for FTM_FMS_FAULTF0. */ +#define BS_FTM_FMS_FAULTF0 (1U) /*!< Bit field size in bits for FTM_FMS_FAULTF0. */ + +/*! @brief Read current value of the FTM_FMS_FAULTF0 field. */ +#define BR_FTM_FMS_FAULTF0(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF0)) + +/*! @brief Format value for bitfield FTM_FMS_FAULTF0. */ +#define BF_FTM_FMS_FAULTF0(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF0) & BM_FTM_FMS_FAULTF0) + +/*! @brief Set the FAULTF0 field to a new value. */ +#define BW_FTM_FMS_FAULTF0(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF0) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field FAULTF1[1] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF1 + * by reading the FMS register while FAULTF1 is set and then writing a 0 to + * FAULTF1 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF1 has no effect. FAULTF1 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF1 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTF1 (1U) /*!< Bit position for FTM_FMS_FAULTF1. */ +#define BM_FTM_FMS_FAULTF1 (0x00000002U) /*!< Bit mask for FTM_FMS_FAULTF1. */ +#define BS_FTM_FMS_FAULTF1 (1U) /*!< Bit field size in bits for FTM_FMS_FAULTF1. */ + +/*! @brief Read current value of the FTM_FMS_FAULTF1 field. */ +#define BR_FTM_FMS_FAULTF1(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF1)) + +/*! @brief Format value for bitfield FTM_FMS_FAULTF1. */ +#define BF_FTM_FMS_FAULTF1(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF1) & BM_FTM_FMS_FAULTF1) + +/*! @brief Set the FAULTF1 field to a new value. */ +#define BW_FTM_FMS_FAULTF1(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF1) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field FAULTF2[2] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF2 + * by reading the FMS register while FAULTF2 is set and then writing a 0 to + * FAULTF2 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF2 has no effect. FAULTF2 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF2 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTF2 (2U) /*!< Bit position for FTM_FMS_FAULTF2. */ +#define BM_FTM_FMS_FAULTF2 (0x00000004U) /*!< Bit mask for FTM_FMS_FAULTF2. */ +#define BS_FTM_FMS_FAULTF2 (1U) /*!< Bit field size in bits for FTM_FMS_FAULTF2. */ + +/*! @brief Read current value of the FTM_FMS_FAULTF2 field. */ +#define BR_FTM_FMS_FAULTF2(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF2)) + +/*! @brief Format value for bitfield FTM_FMS_FAULTF2. */ +#define BF_FTM_FMS_FAULTF2(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF2) & BM_FTM_FMS_FAULTF2) + +/*! @brief Set the FAULTF2 field to a new value. */ +#define BW_FTM_FMS_FAULTF2(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF2) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field FAULTF3[3] (ROWZ) + * + * Set by hardware when fault control is enabled, the corresponding fault input + * is enabled and a fault condition is detected at the fault input. Clear FAULTF3 + * by reading the FMS register while FAULTF3 is set and then writing a 0 to + * FAULTF3 while there is no existing fault condition at the corresponding fault + * input. Writing a 1 to FAULTF3 has no effect. FAULTF3 bit is also cleared when + * FAULTF bit is cleared. If another fault condition is detected at the corresponding + * fault input before the clearing sequence is completed, the sequence is reset + * so FAULTF3 remains set after the clearing sequence is completed for the + * earlier fault condition. + * + * Values: + * - 0 - No fault condition was detected at the fault input. + * - 1 - A fault condition was detected at the fault input. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTF3 (3U) /*!< Bit position for FTM_FMS_FAULTF3. */ +#define BM_FTM_FMS_FAULTF3 (0x00000008U) /*!< Bit mask for FTM_FMS_FAULTF3. */ +#define BS_FTM_FMS_FAULTF3 (1U) /*!< Bit field size in bits for FTM_FMS_FAULTF3. */ + +/*! @brief Read current value of the FTM_FMS_FAULTF3 field. */ +#define BR_FTM_FMS_FAULTF3(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF3)) + +/*! @brief Format value for bitfield FTM_FMS_FAULTF3. */ +#define BF_FTM_FMS_FAULTF3(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF3) & BM_FTM_FMS_FAULTF3) + +/*! @brief Set the FAULTF3 field to a new value. */ +#define BW_FTM_FMS_FAULTF3(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF3) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field FAULTIN[5] (RO) + * + * Represents the logic OR of the enabled fault inputs after their filter (if + * their filter is enabled) when fault control is enabled. + * + * Values: + * - 0 - The logic OR of the enabled fault inputs is 0. + * - 1 - The logic OR of the enabled fault inputs is 1. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTIN (5U) /*!< Bit position for FTM_FMS_FAULTIN. */ +#define BM_FTM_FMS_FAULTIN (0x00000020U) /*!< Bit mask for FTM_FMS_FAULTIN. */ +#define BS_FTM_FMS_FAULTIN (1U) /*!< Bit field size in bits for FTM_FMS_FAULTIN. */ + +/*! @brief Read current value of the FTM_FMS_FAULTIN field. */ +#define BR_FTM_FMS_FAULTIN(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTIN)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field WPEN[6] (RW) + * + * The WPEN bit is the negation of the WPDIS bit. WPEN is set when 1 is written + * to it. WPEN is cleared when WPEN bit is read as a 1 and then 1 is written to + * WPDIS. Writing 0 to WPEN has no effect. + * + * Values: + * - 0 - Write protection is disabled. Write protected bits can be written. + * - 1 - Write protection is enabled. Write protected bits cannot be written. + */ +/*@{*/ +#define BP_FTM_FMS_WPEN (6U) /*!< Bit position for FTM_FMS_WPEN. */ +#define BM_FTM_FMS_WPEN (0x00000040U) /*!< Bit mask for FTM_FMS_WPEN. */ +#define BS_FTM_FMS_WPEN (1U) /*!< Bit field size in bits for FTM_FMS_WPEN. */ + +/*! @brief Read current value of the FTM_FMS_WPEN field. */ +#define BR_FTM_FMS_WPEN(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN)) + +/*! @brief Format value for bitfield FTM_FMS_WPEN. */ +#define BF_FTM_FMS_WPEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_WPEN) & BM_FTM_FMS_WPEN) + +/*! @brief Set the WPEN field to a new value. */ +#define BW_FTM_FMS_WPEN(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_WPEN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FMS, field FAULTF[7] (ROWZ) + * + * Represents the logic OR of the individual FAULTFj bits where j = 3, 2, 1, 0. + * Clear FAULTF by reading the FMS register while FAULTF is set and then writing + * a 0 to FAULTF while there is no existing fault condition at the enabled fault + * inputs. Writing a 1 to FAULTF has no effect. If another fault condition is + * detected in an enabled fault input before the clearing sequence is completed, the + * sequence is reset so FAULTF remains set after the clearing sequence is + * completed for the earlier fault condition. FAULTF is also cleared when FAULTFj bits + * are cleared individually. + * + * Values: + * - 0 - No fault condition was detected. + * - 1 - A fault condition was detected. + */ +/*@{*/ +#define BP_FTM_FMS_FAULTF (7U) /*!< Bit position for FTM_FMS_FAULTF. */ +#define BM_FTM_FMS_FAULTF (0x00000080U) /*!< Bit mask for FTM_FMS_FAULTF. */ +#define BS_FTM_FMS_FAULTF (1U) /*!< Bit field size in bits for FTM_FMS_FAULTF. */ + +/*! @brief Read current value of the FTM_FMS_FAULTF field. */ +#define BR_FTM_FMS_FAULTF(x) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF)) + +/*! @brief Format value for bitfield FTM_FMS_FAULTF. */ +#define BF_FTM_FMS_FAULTF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FMS_FAULTF) & BM_FTM_FMS_FAULTF) + +/*! @brief Set the FAULTF field to a new value. */ +#define BW_FTM_FMS_FAULTF(x, v) (BITBAND_ACCESS32(HW_FTM_FMS_ADDR(x), BP_FTM_FMS_FAULTF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_FILTER - Input Capture Filter Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_FILTER - Input Capture Filter Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the filter value for the inputs of channels. Channels + * 4, 5, 6 and 7 do not have an input filter. Writing to the FILTER register has + * immediate effect and must be done only when the channels 0, 1, 2, and 3 are not + * in input modes. Failure to do this could result in a missing valid signal. + */ +typedef union _hw_ftm_filter +{ + uint32_t U; + struct _hw_ftm_filter_bitfields + { + uint32_t CH0FVAL : 4; /*!< [3:0] Channel 0 Input Filter */ + uint32_t CH1FVAL : 4; /*!< [7:4] Channel 1 Input Filter */ + uint32_t CH2FVAL : 4; /*!< [11:8] Channel 2 Input Filter */ + uint32_t CH3FVAL : 4; /*!< [15:12] Channel 3 Input Filter */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_filter_t; + +/*! + * @name Constants and macros for entire FTM_FILTER register + */ +/*@{*/ +#define HW_FTM_FILTER_ADDR(x) ((x) + 0x78U) + +#define HW_FTM_FILTER(x) (*(__IO hw_ftm_filter_t *) HW_FTM_FILTER_ADDR(x)) +#define HW_FTM_FILTER_RD(x) (HW_FTM_FILTER(x).U) +#define HW_FTM_FILTER_WR(x, v) (HW_FTM_FILTER(x).U = (v)) +#define HW_FTM_FILTER_SET(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) | (v))) +#define HW_FTM_FILTER_CLR(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) & ~(v))) +#define HW_FTM_FILTER_TOG(x, v) (HW_FTM_FILTER_WR(x, HW_FTM_FILTER_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_FILTER bitfields + */ + +/*! + * @name Register FTM_FILTER, field CH0FVAL[3:0] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +/*@{*/ +#define BP_FTM_FILTER_CH0FVAL (0U) /*!< Bit position for FTM_FILTER_CH0FVAL. */ +#define BM_FTM_FILTER_CH0FVAL (0x0000000FU) /*!< Bit mask for FTM_FILTER_CH0FVAL. */ +#define BS_FTM_FILTER_CH0FVAL (4U) /*!< Bit field size in bits for FTM_FILTER_CH0FVAL. */ + +/*! @brief Read current value of the FTM_FILTER_CH0FVAL field. */ +#define BR_FTM_FILTER_CH0FVAL(x) (HW_FTM_FILTER(x).B.CH0FVAL) + +/*! @brief Format value for bitfield FTM_FILTER_CH0FVAL. */ +#define BF_FTM_FILTER_CH0FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH0FVAL) & BM_FTM_FILTER_CH0FVAL) + +/*! @brief Set the CH0FVAL field to a new value. */ +#define BW_FTM_FILTER_CH0FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH0FVAL) | BF_FTM_FILTER_CH0FVAL(v))) +/*@}*/ + +/*! + * @name Register FTM_FILTER, field CH1FVAL[7:4] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +/*@{*/ +#define BP_FTM_FILTER_CH1FVAL (4U) /*!< Bit position for FTM_FILTER_CH1FVAL. */ +#define BM_FTM_FILTER_CH1FVAL (0x000000F0U) /*!< Bit mask for FTM_FILTER_CH1FVAL. */ +#define BS_FTM_FILTER_CH1FVAL (4U) /*!< Bit field size in bits for FTM_FILTER_CH1FVAL. */ + +/*! @brief Read current value of the FTM_FILTER_CH1FVAL field. */ +#define BR_FTM_FILTER_CH1FVAL(x) (HW_FTM_FILTER(x).B.CH1FVAL) + +/*! @brief Format value for bitfield FTM_FILTER_CH1FVAL. */ +#define BF_FTM_FILTER_CH1FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH1FVAL) & BM_FTM_FILTER_CH1FVAL) + +/*! @brief Set the CH1FVAL field to a new value. */ +#define BW_FTM_FILTER_CH1FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH1FVAL) | BF_FTM_FILTER_CH1FVAL(v))) +/*@}*/ + +/*! + * @name Register FTM_FILTER, field CH2FVAL[11:8] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +/*@{*/ +#define BP_FTM_FILTER_CH2FVAL (8U) /*!< Bit position for FTM_FILTER_CH2FVAL. */ +#define BM_FTM_FILTER_CH2FVAL (0x00000F00U) /*!< Bit mask for FTM_FILTER_CH2FVAL. */ +#define BS_FTM_FILTER_CH2FVAL (4U) /*!< Bit field size in bits for FTM_FILTER_CH2FVAL. */ + +/*! @brief Read current value of the FTM_FILTER_CH2FVAL field. */ +#define BR_FTM_FILTER_CH2FVAL(x) (HW_FTM_FILTER(x).B.CH2FVAL) + +/*! @brief Format value for bitfield FTM_FILTER_CH2FVAL. */ +#define BF_FTM_FILTER_CH2FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH2FVAL) & BM_FTM_FILTER_CH2FVAL) + +/*! @brief Set the CH2FVAL field to a new value. */ +#define BW_FTM_FILTER_CH2FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH2FVAL) | BF_FTM_FILTER_CH2FVAL(v))) +/*@}*/ + +/*! + * @name Register FTM_FILTER, field CH3FVAL[15:12] (RW) + * + * Selects the filter value for the channel input. The filter is disabled when + * the value is zero. + */ +/*@{*/ +#define BP_FTM_FILTER_CH3FVAL (12U) /*!< Bit position for FTM_FILTER_CH3FVAL. */ +#define BM_FTM_FILTER_CH3FVAL (0x0000F000U) /*!< Bit mask for FTM_FILTER_CH3FVAL. */ +#define BS_FTM_FILTER_CH3FVAL (4U) /*!< Bit field size in bits for FTM_FILTER_CH3FVAL. */ + +/*! @brief Read current value of the FTM_FILTER_CH3FVAL field. */ +#define BR_FTM_FILTER_CH3FVAL(x) (HW_FTM_FILTER(x).B.CH3FVAL) + +/*! @brief Format value for bitfield FTM_FILTER_CH3FVAL. */ +#define BF_FTM_FILTER_CH3FVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FILTER_CH3FVAL) & BM_FTM_FILTER_CH3FVAL) + +/*! @brief Set the CH3FVAL field to a new value. */ +#define BW_FTM_FILTER_CH3FVAL(x, v) (HW_FTM_FILTER_WR(x, (HW_FTM_FILTER_RD(x) & ~BM_FTM_FILTER_CH3FVAL) | BF_FTM_FILTER_CH3FVAL(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_FLTCTRL - Fault Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_FLTCTRL - Fault Control (RW) + * + * Reset value: 0x00000000U + * + * This register selects the filter value for the fault inputs, enables the + * fault inputs and the fault inputs filter. + */ +typedef union _hw_ftm_fltctrl +{ + uint32_t U; + struct _hw_ftm_fltctrl_bitfields + { + uint32_t FAULT0EN : 1; /*!< [0] Fault Input 0 Enable */ + uint32_t FAULT1EN : 1; /*!< [1] Fault Input 1 Enable */ + uint32_t FAULT2EN : 1; /*!< [2] Fault Input 2 Enable */ + uint32_t FAULT3EN : 1; /*!< [3] Fault Input 3 Enable */ + uint32_t FFLTR0EN : 1; /*!< [4] Fault Input 0 Filter Enable */ + uint32_t FFLTR1EN : 1; /*!< [5] Fault Input 1 Filter Enable */ + uint32_t FFLTR2EN : 1; /*!< [6] Fault Input 2 Filter Enable */ + uint32_t FFLTR3EN : 1; /*!< [7] Fault Input 3 Filter Enable */ + uint32_t FFVAL : 4; /*!< [11:8] Fault Input Filter */ + uint32_t RESERVED0 : 20; /*!< [31:12] */ + } B; +} hw_ftm_fltctrl_t; + +/*! + * @name Constants and macros for entire FTM_FLTCTRL register + */ +/*@{*/ +#define HW_FTM_FLTCTRL_ADDR(x) ((x) + 0x7CU) + +#define HW_FTM_FLTCTRL(x) (*(__IO hw_ftm_fltctrl_t *) HW_FTM_FLTCTRL_ADDR(x)) +#define HW_FTM_FLTCTRL_RD(x) (HW_FTM_FLTCTRL(x).U) +#define HW_FTM_FLTCTRL_WR(x, v) (HW_FTM_FLTCTRL(x).U = (v)) +#define HW_FTM_FLTCTRL_SET(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) | (v))) +#define HW_FTM_FLTCTRL_CLR(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) & ~(v))) +#define HW_FTM_FLTCTRL_TOG(x, v) (HW_FTM_FLTCTRL_WR(x, HW_FTM_FLTCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_FLTCTRL bitfields + */ + +/*! + * @name Register FTM_FLTCTRL, field FAULT0EN[0] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FAULT0EN (0U) /*!< Bit position for FTM_FLTCTRL_FAULT0EN. */ +#define BM_FTM_FLTCTRL_FAULT0EN (0x00000001U) /*!< Bit mask for FTM_FLTCTRL_FAULT0EN. */ +#define BS_FTM_FLTCTRL_FAULT0EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FAULT0EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FAULT0EN field. */ +#define BR_FTM_FLTCTRL_FAULT0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT0EN. */ +#define BF_FTM_FLTCTRL_FAULT0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT0EN) & BM_FTM_FLTCTRL_FAULT0EN) + +/*! @brief Set the FAULT0EN field to a new value. */ +#define BW_FTM_FLTCTRL_FAULT0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT0EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FAULT1EN[1] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FAULT1EN (1U) /*!< Bit position for FTM_FLTCTRL_FAULT1EN. */ +#define BM_FTM_FLTCTRL_FAULT1EN (0x00000002U) /*!< Bit mask for FTM_FLTCTRL_FAULT1EN. */ +#define BS_FTM_FLTCTRL_FAULT1EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FAULT1EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FAULT1EN field. */ +#define BR_FTM_FLTCTRL_FAULT1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT1EN. */ +#define BF_FTM_FLTCTRL_FAULT1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT1EN) & BM_FTM_FLTCTRL_FAULT1EN) + +/*! @brief Set the FAULT1EN field to a new value. */ +#define BW_FTM_FLTCTRL_FAULT1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT1EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FAULT2EN[2] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FAULT2EN (2U) /*!< Bit position for FTM_FLTCTRL_FAULT2EN. */ +#define BM_FTM_FLTCTRL_FAULT2EN (0x00000004U) /*!< Bit mask for FTM_FLTCTRL_FAULT2EN. */ +#define BS_FTM_FLTCTRL_FAULT2EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FAULT2EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FAULT2EN field. */ +#define BR_FTM_FLTCTRL_FAULT2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT2EN. */ +#define BF_FTM_FLTCTRL_FAULT2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT2EN) & BM_FTM_FLTCTRL_FAULT2EN) + +/*! @brief Set the FAULT2EN field to a new value. */ +#define BW_FTM_FLTCTRL_FAULT2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT2EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FAULT3EN[3] (RW) + * + * Enables the fault input. This field is write protected. It can be written + * only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input is disabled. + * - 1 - Fault input is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FAULT3EN (3U) /*!< Bit position for FTM_FLTCTRL_FAULT3EN. */ +#define BM_FTM_FLTCTRL_FAULT3EN (0x00000008U) /*!< Bit mask for FTM_FLTCTRL_FAULT3EN. */ +#define BS_FTM_FLTCTRL_FAULT3EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FAULT3EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FAULT3EN field. */ +#define BR_FTM_FLTCTRL_FAULT3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FAULT3EN. */ +#define BF_FTM_FLTCTRL_FAULT3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FAULT3EN) & BM_FTM_FLTCTRL_FAULT3EN) + +/*! @brief Set the FAULT3EN field to a new value. */ +#define BW_FTM_FLTCTRL_FAULT3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FAULT3EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FFLTR0EN[4] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FFLTR0EN (4U) /*!< Bit position for FTM_FLTCTRL_FFLTR0EN. */ +#define BM_FTM_FLTCTRL_FFLTR0EN (0x00000010U) /*!< Bit mask for FTM_FLTCTRL_FFLTR0EN. */ +#define BS_FTM_FLTCTRL_FFLTR0EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR0EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FFLTR0EN field. */ +#define BR_FTM_FLTCTRL_FFLTR0EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR0EN. */ +#define BF_FTM_FLTCTRL_FFLTR0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR0EN) & BM_FTM_FLTCTRL_FFLTR0EN) + +/*! @brief Set the FFLTR0EN field to a new value. */ +#define BW_FTM_FLTCTRL_FFLTR0EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR0EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FFLTR1EN[5] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FFLTR1EN (5U) /*!< Bit position for FTM_FLTCTRL_FFLTR1EN. */ +#define BM_FTM_FLTCTRL_FFLTR1EN (0x00000020U) /*!< Bit mask for FTM_FLTCTRL_FFLTR1EN. */ +#define BS_FTM_FLTCTRL_FFLTR1EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR1EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FFLTR1EN field. */ +#define BR_FTM_FLTCTRL_FFLTR1EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR1EN. */ +#define BF_FTM_FLTCTRL_FFLTR1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR1EN) & BM_FTM_FLTCTRL_FFLTR1EN) + +/*! @brief Set the FFLTR1EN field to a new value. */ +#define BW_FTM_FLTCTRL_FFLTR1EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR1EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FFLTR2EN[6] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FFLTR2EN (6U) /*!< Bit position for FTM_FLTCTRL_FFLTR2EN. */ +#define BM_FTM_FLTCTRL_FFLTR2EN (0x00000040U) /*!< Bit mask for FTM_FLTCTRL_FFLTR2EN. */ +#define BS_FTM_FLTCTRL_FFLTR2EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR2EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FFLTR2EN field. */ +#define BR_FTM_FLTCTRL_FFLTR2EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR2EN. */ +#define BF_FTM_FLTCTRL_FFLTR2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR2EN) & BM_FTM_FLTCTRL_FFLTR2EN) + +/*! @brief Set the FFLTR2EN field to a new value. */ +#define BW_FTM_FLTCTRL_FFLTR2EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR2EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FFLTR3EN[7] (RW) + * + * Enables the filter for the fault input. This field is write protected. It can + * be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Fault input filter is disabled. + * - 1 - Fault input filter is enabled. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FFLTR3EN (7U) /*!< Bit position for FTM_FLTCTRL_FFLTR3EN. */ +#define BM_FTM_FLTCTRL_FFLTR3EN (0x00000080U) /*!< Bit mask for FTM_FLTCTRL_FFLTR3EN. */ +#define BS_FTM_FLTCTRL_FFLTR3EN (1U) /*!< Bit field size in bits for FTM_FLTCTRL_FFLTR3EN. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FFLTR3EN field. */ +#define BR_FTM_FLTCTRL_FFLTR3EN(x) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN)) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FFLTR3EN. */ +#define BF_FTM_FLTCTRL_FFLTR3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFLTR3EN) & BM_FTM_FLTCTRL_FFLTR3EN) + +/*! @brief Set the FFLTR3EN field to a new value. */ +#define BW_FTM_FLTCTRL_FFLTR3EN(x, v) (BITBAND_ACCESS32(HW_FTM_FLTCTRL_ADDR(x), BP_FTM_FLTCTRL_FFLTR3EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTCTRL, field FFVAL[11:8] (RW) + * + * Selects the filter value for the fault inputs. The fault filter is disabled + * when the value is zero. Writing to this field has immediate effect and must be + * done only when the fault control or all fault inputs are disabled. Failure to + * do this could result in a missing fault detection. + */ +/*@{*/ +#define BP_FTM_FLTCTRL_FFVAL (8U) /*!< Bit position for FTM_FLTCTRL_FFVAL. */ +#define BM_FTM_FLTCTRL_FFVAL (0x00000F00U) /*!< Bit mask for FTM_FLTCTRL_FFVAL. */ +#define BS_FTM_FLTCTRL_FFVAL (4U) /*!< Bit field size in bits for FTM_FLTCTRL_FFVAL. */ + +/*! @brief Read current value of the FTM_FLTCTRL_FFVAL field. */ +#define BR_FTM_FLTCTRL_FFVAL(x) (HW_FTM_FLTCTRL(x).B.FFVAL) + +/*! @brief Format value for bitfield FTM_FLTCTRL_FFVAL. */ +#define BF_FTM_FLTCTRL_FFVAL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTCTRL_FFVAL) & BM_FTM_FLTCTRL_FFVAL) + +/*! @brief Set the FFVAL field to a new value. */ +#define BW_FTM_FLTCTRL_FFVAL(x, v) (HW_FTM_FLTCTRL_WR(x, (HW_FTM_FLTCTRL_RD(x) & ~BM_FTM_FLTCTRL_FFVAL) | BF_FTM_FLTCTRL_FFVAL(v))) +/*@}*/ + +/******************************************************************************* + * HW_FTM_QDCTRL - Quadrature Decoder Control And Status + ******************************************************************************/ + +/*! + * @brief HW_FTM_QDCTRL - Quadrature Decoder Control And Status (RW) + * + * Reset value: 0x00000000U + * + * This register has the control and status bits for the Quadrature Decoder mode. + */ +typedef union _hw_ftm_qdctrl +{ + uint32_t U; + struct _hw_ftm_qdctrl_bitfields + { + uint32_t QUADEN : 1; /*!< [0] Quadrature Decoder Mode Enable */ + uint32_t TOFDIR : 1; /*!< [1] Timer Overflow Direction In Quadrature + * Decoder Mode */ + uint32_t QUADIR : 1; /*!< [2] FTM Counter Direction In Quadrature + * Decoder Mode */ + uint32_t QUADMODE : 1; /*!< [3] Quadrature Decoder Mode */ + uint32_t PHBPOL : 1; /*!< [4] Phase B Input Polarity */ + uint32_t PHAPOL : 1; /*!< [5] Phase A Input Polarity */ + uint32_t PHBFLTREN : 1; /*!< [6] Phase B Input Filter Enable */ + uint32_t PHAFLTREN : 1; /*!< [7] Phase A Input Filter Enable */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_ftm_qdctrl_t; + +/*! + * @name Constants and macros for entire FTM_QDCTRL register + */ +/*@{*/ +#define HW_FTM_QDCTRL_ADDR(x) ((x) + 0x80U) + +#define HW_FTM_QDCTRL(x) (*(__IO hw_ftm_qdctrl_t *) HW_FTM_QDCTRL_ADDR(x)) +#define HW_FTM_QDCTRL_RD(x) (HW_FTM_QDCTRL(x).U) +#define HW_FTM_QDCTRL_WR(x, v) (HW_FTM_QDCTRL(x).U = (v)) +#define HW_FTM_QDCTRL_SET(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) | (v))) +#define HW_FTM_QDCTRL_CLR(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) & ~(v))) +#define HW_FTM_QDCTRL_TOG(x, v) (HW_FTM_QDCTRL_WR(x, HW_FTM_QDCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_QDCTRL bitfields + */ + +/*! + * @name Register FTM_QDCTRL, field QUADEN[0] (RW) + * + * Enables the Quadrature Decoder mode. In this mode, the phase A and B input + * signals control the FTM counter direction. The Quadrature Decoder mode has + * precedence over the other modes. See #ModeSel1Table. This field is write protected. + * It can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - Quadrature Decoder mode is disabled. + * - 1 - Quadrature Decoder mode is enabled. + */ +/*@{*/ +#define BP_FTM_QDCTRL_QUADEN (0U) /*!< Bit position for FTM_QDCTRL_QUADEN. */ +#define BM_FTM_QDCTRL_QUADEN (0x00000001U) /*!< Bit mask for FTM_QDCTRL_QUADEN. */ +#define BS_FTM_QDCTRL_QUADEN (1U) /*!< Bit field size in bits for FTM_QDCTRL_QUADEN. */ + +/*! @brief Read current value of the FTM_QDCTRL_QUADEN field. */ +#define BR_FTM_QDCTRL_QUADEN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN)) + +/*! @brief Format value for bitfield FTM_QDCTRL_QUADEN. */ +#define BF_FTM_QDCTRL_QUADEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_QUADEN) & BM_FTM_QDCTRL_QUADEN) + +/*! @brief Set the QUADEN field to a new value. */ +#define BW_FTM_QDCTRL_QUADEN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADEN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field TOFDIR[1] (RO) + * + * Indicates if the TOF bit was set on the top or the bottom of counting. + * + * Values: + * - 0 - TOF bit was set on the bottom of counting. There was an FTM counter + * decrement and FTM counter changes from its minimum value (CNTIN register) to + * its maximum value (MOD register). + * - 1 - TOF bit was set on the top of counting. There was an FTM counter + * increment and FTM counter changes from its maximum value (MOD register) to its + * minimum value (CNTIN register). + */ +/*@{*/ +#define BP_FTM_QDCTRL_TOFDIR (1U) /*!< Bit position for FTM_QDCTRL_TOFDIR. */ +#define BM_FTM_QDCTRL_TOFDIR (0x00000002U) /*!< Bit mask for FTM_QDCTRL_TOFDIR. */ +#define BS_FTM_QDCTRL_TOFDIR (1U) /*!< Bit field size in bits for FTM_QDCTRL_TOFDIR. */ + +/*! @brief Read current value of the FTM_QDCTRL_TOFDIR field. */ +#define BR_FTM_QDCTRL_TOFDIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_TOFDIR)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field QUADIR[2] (RO) + * + * Indicates the counting direction. + * + * Values: + * - 0 - Counting direction is decreasing (FTM counter decrement). + * - 1 - Counting direction is increasing (FTM counter increment). + */ +/*@{*/ +#define BP_FTM_QDCTRL_QUADIR (2U) /*!< Bit position for FTM_QDCTRL_QUADIR. */ +#define BM_FTM_QDCTRL_QUADIR (0x00000004U) /*!< Bit mask for FTM_QDCTRL_QUADIR. */ +#define BS_FTM_QDCTRL_QUADIR (1U) /*!< Bit field size in bits for FTM_QDCTRL_QUADIR. */ + +/*! @brief Read current value of the FTM_QDCTRL_QUADIR field. */ +#define BR_FTM_QDCTRL_QUADIR(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADIR)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field QUADMODE[3] (RW) + * + * Selects the encoding mode used in the Quadrature Decoder mode. + * + * Values: + * - 0 - Phase A and phase B encoding mode. + * - 1 - Count and direction encoding mode. + */ +/*@{*/ +#define BP_FTM_QDCTRL_QUADMODE (3U) /*!< Bit position for FTM_QDCTRL_QUADMODE. */ +#define BM_FTM_QDCTRL_QUADMODE (0x00000008U) /*!< Bit mask for FTM_QDCTRL_QUADMODE. */ +#define BS_FTM_QDCTRL_QUADMODE (1U) /*!< Bit field size in bits for FTM_QDCTRL_QUADMODE. */ + +/*! @brief Read current value of the FTM_QDCTRL_QUADMODE field. */ +#define BR_FTM_QDCTRL_QUADMODE(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE)) + +/*! @brief Format value for bitfield FTM_QDCTRL_QUADMODE. */ +#define BF_FTM_QDCTRL_QUADMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_QUADMODE) & BM_FTM_QDCTRL_QUADMODE) + +/*! @brief Set the QUADMODE field to a new value. */ +#define BW_FTM_QDCTRL_QUADMODE(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_QUADMODE) = (v)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field PHBPOL[4] (RW) + * + * Selects the polarity for the quadrature decoder phase B input. + * + * Values: + * - 0 - Normal polarity. Phase B input signal is not inverted before + * identifying the rising and falling edges of this signal. + * - 1 - Inverted polarity. Phase B input signal is inverted before identifying + * the rising and falling edges of this signal. + */ +/*@{*/ +#define BP_FTM_QDCTRL_PHBPOL (4U) /*!< Bit position for FTM_QDCTRL_PHBPOL. */ +#define BM_FTM_QDCTRL_PHBPOL (0x00000010U) /*!< Bit mask for FTM_QDCTRL_PHBPOL. */ +#define BS_FTM_QDCTRL_PHBPOL (1U) /*!< Bit field size in bits for FTM_QDCTRL_PHBPOL. */ + +/*! @brief Read current value of the FTM_QDCTRL_PHBPOL field. */ +#define BR_FTM_QDCTRL_PHBPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL)) + +/*! @brief Format value for bitfield FTM_QDCTRL_PHBPOL. */ +#define BF_FTM_QDCTRL_PHBPOL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHBPOL) & BM_FTM_QDCTRL_PHBPOL) + +/*! @brief Set the PHBPOL field to a new value. */ +#define BW_FTM_QDCTRL_PHBPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBPOL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field PHAPOL[5] (RW) + * + * Selects the polarity for the quadrature decoder phase A input. + * + * Values: + * - 0 - Normal polarity. Phase A input signal is not inverted before + * identifying the rising and falling edges of this signal. + * - 1 - Inverted polarity. Phase A input signal is inverted before identifying + * the rising and falling edges of this signal. + */ +/*@{*/ +#define BP_FTM_QDCTRL_PHAPOL (5U) /*!< Bit position for FTM_QDCTRL_PHAPOL. */ +#define BM_FTM_QDCTRL_PHAPOL (0x00000020U) /*!< Bit mask for FTM_QDCTRL_PHAPOL. */ +#define BS_FTM_QDCTRL_PHAPOL (1U) /*!< Bit field size in bits for FTM_QDCTRL_PHAPOL. */ + +/*! @brief Read current value of the FTM_QDCTRL_PHAPOL field. */ +#define BR_FTM_QDCTRL_PHAPOL(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL)) + +/*! @brief Format value for bitfield FTM_QDCTRL_PHAPOL. */ +#define BF_FTM_QDCTRL_PHAPOL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHAPOL) & BM_FTM_QDCTRL_PHAPOL) + +/*! @brief Set the PHAPOL field to a new value. */ +#define BW_FTM_QDCTRL_PHAPOL(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAPOL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field PHBFLTREN[6] (RW) + * + * Enables the filter for the quadrature decoder phase B input. The filter value + * for the phase B input is defined by the CH1FVAL field of FILTER. The phase B + * filter is also disabled when CH1FVAL is zero. + * + * Values: + * - 0 - Phase B input filter is disabled. + * - 1 - Phase B input filter is enabled. + */ +/*@{*/ +#define BP_FTM_QDCTRL_PHBFLTREN (6U) /*!< Bit position for FTM_QDCTRL_PHBFLTREN. */ +#define BM_FTM_QDCTRL_PHBFLTREN (0x00000040U) /*!< Bit mask for FTM_QDCTRL_PHBFLTREN. */ +#define BS_FTM_QDCTRL_PHBFLTREN (1U) /*!< Bit field size in bits for FTM_QDCTRL_PHBFLTREN. */ + +/*! @brief Read current value of the FTM_QDCTRL_PHBFLTREN field. */ +#define BR_FTM_QDCTRL_PHBFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN)) + +/*! @brief Format value for bitfield FTM_QDCTRL_PHBFLTREN. */ +#define BF_FTM_QDCTRL_PHBFLTREN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHBFLTREN) & BM_FTM_QDCTRL_PHBFLTREN) + +/*! @brief Set the PHBFLTREN field to a new value. */ +#define BW_FTM_QDCTRL_PHBFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHBFLTREN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_QDCTRL, field PHAFLTREN[7] (RW) + * + * Enables the filter for the quadrature decoder phase A input. The filter value + * for the phase A input is defined by the CH0FVAL field of FILTER. The phase A + * filter is also disabled when CH0FVAL is zero. + * + * Values: + * - 0 - Phase A input filter is disabled. + * - 1 - Phase A input filter is enabled. + */ +/*@{*/ +#define BP_FTM_QDCTRL_PHAFLTREN (7U) /*!< Bit position for FTM_QDCTRL_PHAFLTREN. */ +#define BM_FTM_QDCTRL_PHAFLTREN (0x00000080U) /*!< Bit mask for FTM_QDCTRL_PHAFLTREN. */ +#define BS_FTM_QDCTRL_PHAFLTREN (1U) /*!< Bit field size in bits for FTM_QDCTRL_PHAFLTREN. */ + +/*! @brief Read current value of the FTM_QDCTRL_PHAFLTREN field. */ +#define BR_FTM_QDCTRL_PHAFLTREN(x) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN)) + +/*! @brief Format value for bitfield FTM_QDCTRL_PHAFLTREN. */ +#define BF_FTM_QDCTRL_PHAFLTREN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_QDCTRL_PHAFLTREN) & BM_FTM_QDCTRL_PHAFLTREN) + +/*! @brief Set the PHAFLTREN field to a new value. */ +#define BW_FTM_QDCTRL_PHAFLTREN(x, v) (BITBAND_ACCESS32(HW_FTM_QDCTRL_ADDR(x), BP_FTM_QDCTRL_PHAFLTREN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_CONF - Configuration + ******************************************************************************/ + +/*! + * @brief HW_FTM_CONF - Configuration (RW) + * + * Reset value: 0x00000000U + * + * This register selects the number of times that the FTM counter overflow + * should occur before the TOF bit to be set, the FTM behavior in BDM modes, the use + * of an external global time base, and the global time base signal generation. + */ +typedef union _hw_ftm_conf +{ + uint32_t U; + struct _hw_ftm_conf_bitfields + { + uint32_t NUMTOF : 5; /*!< [4:0] TOF Frequency */ + uint32_t RESERVED0 : 1; /*!< [5] */ + uint32_t BDMMODE : 2; /*!< [7:6] BDM Mode */ + uint32_t RESERVED1 : 1; /*!< [8] */ + uint32_t GTBEEN : 1; /*!< [9] Global Time Base Enable */ + uint32_t GTBEOUT : 1; /*!< [10] Global Time Base Output */ + uint32_t RESERVED2 : 21; /*!< [31:11] */ + } B; +} hw_ftm_conf_t; + +/*! + * @name Constants and macros for entire FTM_CONF register + */ +/*@{*/ +#define HW_FTM_CONF_ADDR(x) ((x) + 0x84U) + +#define HW_FTM_CONF(x) (*(__IO hw_ftm_conf_t *) HW_FTM_CONF_ADDR(x)) +#define HW_FTM_CONF_RD(x) (HW_FTM_CONF(x).U) +#define HW_FTM_CONF_WR(x, v) (HW_FTM_CONF(x).U = (v)) +#define HW_FTM_CONF_SET(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) | (v))) +#define HW_FTM_CONF_CLR(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) & ~(v))) +#define HW_FTM_CONF_TOG(x, v) (HW_FTM_CONF_WR(x, HW_FTM_CONF_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_CONF bitfields + */ + +/*! + * @name Register FTM_CONF, field NUMTOF[4:0] (RW) + * + * Selects the ratio between the number of counter overflows to the number of + * times the TOF bit is set. NUMTOF = 0: The TOF bit is set for each counter + * overflow. NUMTOF = 1: The TOF bit is set for the first counter overflow but not for + * the next overflow. NUMTOF = 2: The TOF bit is set for the first counter + * overflow but not for the next 2 overflows. NUMTOF = 3: The TOF bit is set for the + * first counter overflow but not for the next 3 overflows. This pattern continues + * up to a maximum of 31. + */ +/*@{*/ +#define BP_FTM_CONF_NUMTOF (0U) /*!< Bit position for FTM_CONF_NUMTOF. */ +#define BM_FTM_CONF_NUMTOF (0x0000001FU) /*!< Bit mask for FTM_CONF_NUMTOF. */ +#define BS_FTM_CONF_NUMTOF (5U) /*!< Bit field size in bits for FTM_CONF_NUMTOF. */ + +/*! @brief Read current value of the FTM_CONF_NUMTOF field. */ +#define BR_FTM_CONF_NUMTOF(x) (HW_FTM_CONF(x).B.NUMTOF) + +/*! @brief Format value for bitfield FTM_CONF_NUMTOF. */ +#define BF_FTM_CONF_NUMTOF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_NUMTOF) & BM_FTM_CONF_NUMTOF) + +/*! @brief Set the NUMTOF field to a new value. */ +#define BW_FTM_CONF_NUMTOF(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_NUMTOF) | BF_FTM_CONF_NUMTOF(v))) +/*@}*/ + +/*! + * @name Register FTM_CONF, field BDMMODE[7:6] (RW) + * + * Selects the FTM behavior in BDM mode. See BDM mode. + */ +/*@{*/ +#define BP_FTM_CONF_BDMMODE (6U) /*!< Bit position for FTM_CONF_BDMMODE. */ +#define BM_FTM_CONF_BDMMODE (0x000000C0U) /*!< Bit mask for FTM_CONF_BDMMODE. */ +#define BS_FTM_CONF_BDMMODE (2U) /*!< Bit field size in bits for FTM_CONF_BDMMODE. */ + +/*! @brief Read current value of the FTM_CONF_BDMMODE field. */ +#define BR_FTM_CONF_BDMMODE(x) (HW_FTM_CONF(x).B.BDMMODE) + +/*! @brief Format value for bitfield FTM_CONF_BDMMODE. */ +#define BF_FTM_CONF_BDMMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_BDMMODE) & BM_FTM_CONF_BDMMODE) + +/*! @brief Set the BDMMODE field to a new value. */ +#define BW_FTM_CONF_BDMMODE(x, v) (HW_FTM_CONF_WR(x, (HW_FTM_CONF_RD(x) & ~BM_FTM_CONF_BDMMODE) | BF_FTM_CONF_BDMMODE(v))) +/*@}*/ + +/*! + * @name Register FTM_CONF, field GTBEEN[9] (RW) + * + * Configures the FTM to use an external global time base signal that is + * generated by another FTM. + * + * Values: + * - 0 - Use of an external global time base is disabled. + * - 1 - Use of an external global time base is enabled. + */ +/*@{*/ +#define BP_FTM_CONF_GTBEEN (9U) /*!< Bit position for FTM_CONF_GTBEEN. */ +#define BM_FTM_CONF_GTBEEN (0x00000200U) /*!< Bit mask for FTM_CONF_GTBEEN. */ +#define BS_FTM_CONF_GTBEEN (1U) /*!< Bit field size in bits for FTM_CONF_GTBEEN. */ + +/*! @brief Read current value of the FTM_CONF_GTBEEN field. */ +#define BR_FTM_CONF_GTBEEN(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN)) + +/*! @brief Format value for bitfield FTM_CONF_GTBEEN. */ +#define BF_FTM_CONF_GTBEEN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_GTBEEN) & BM_FTM_CONF_GTBEEN) + +/*! @brief Set the GTBEEN field to a new value. */ +#define BW_FTM_CONF_GTBEEN(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEEN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_CONF, field GTBEOUT[10] (RW) + * + * Enables the global time base signal generation to other FTMs. + * + * Values: + * - 0 - A global time base signal generation is disabled. + * - 1 - A global time base signal generation is enabled. + */ +/*@{*/ +#define BP_FTM_CONF_GTBEOUT (10U) /*!< Bit position for FTM_CONF_GTBEOUT. */ +#define BM_FTM_CONF_GTBEOUT (0x00000400U) /*!< Bit mask for FTM_CONF_GTBEOUT. */ +#define BS_FTM_CONF_GTBEOUT (1U) /*!< Bit field size in bits for FTM_CONF_GTBEOUT. */ + +/*! @brief Read current value of the FTM_CONF_GTBEOUT field. */ +#define BR_FTM_CONF_GTBEOUT(x) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT)) + +/*! @brief Format value for bitfield FTM_CONF_GTBEOUT. */ +#define BF_FTM_CONF_GTBEOUT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_CONF_GTBEOUT) & BM_FTM_CONF_GTBEOUT) + +/*! @brief Set the GTBEOUT field to a new value. */ +#define BW_FTM_CONF_GTBEOUT(x, v) (BITBAND_ACCESS32(HW_FTM_CONF_ADDR(x), BP_FTM_CONF_GTBEOUT) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_FLTPOL - FTM Fault Input Polarity + ******************************************************************************/ + +/*! + * @brief HW_FTM_FLTPOL - FTM Fault Input Polarity (RW) + * + * Reset value: 0x00000000U + * + * This register defines the fault inputs polarity. + */ +typedef union _hw_ftm_fltpol +{ + uint32_t U; + struct _hw_ftm_fltpol_bitfields + { + uint32_t FLT0POL : 1; /*!< [0] Fault Input 0 Polarity */ + uint32_t FLT1POL : 1; /*!< [1] Fault Input 1 Polarity */ + uint32_t FLT2POL : 1; /*!< [2] Fault Input 2 Polarity */ + uint32_t FLT3POL : 1; /*!< [3] Fault Input 3 Polarity */ + uint32_t RESERVED0 : 28; /*!< [31:4] */ + } B; +} hw_ftm_fltpol_t; + +/*! + * @name Constants and macros for entire FTM_FLTPOL register + */ +/*@{*/ +#define HW_FTM_FLTPOL_ADDR(x) ((x) + 0x88U) + +#define HW_FTM_FLTPOL(x) (*(__IO hw_ftm_fltpol_t *) HW_FTM_FLTPOL_ADDR(x)) +#define HW_FTM_FLTPOL_RD(x) (HW_FTM_FLTPOL(x).U) +#define HW_FTM_FLTPOL_WR(x, v) (HW_FTM_FLTPOL(x).U = (v)) +#define HW_FTM_FLTPOL_SET(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) | (v))) +#define HW_FTM_FLTPOL_CLR(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) & ~(v))) +#define HW_FTM_FLTPOL_TOG(x, v) (HW_FTM_FLTPOL_WR(x, HW_FTM_FLTPOL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_FLTPOL bitfields + */ + +/*! + * @name Register FTM_FLTPOL, field FLT0POL[0] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +/*@{*/ +#define BP_FTM_FLTPOL_FLT0POL (0U) /*!< Bit position for FTM_FLTPOL_FLT0POL. */ +#define BM_FTM_FLTPOL_FLT0POL (0x00000001U) /*!< Bit mask for FTM_FLTPOL_FLT0POL. */ +#define BS_FTM_FLTPOL_FLT0POL (1U) /*!< Bit field size in bits for FTM_FLTPOL_FLT0POL. */ + +/*! @brief Read current value of the FTM_FLTPOL_FLT0POL field. */ +#define BR_FTM_FLTPOL_FLT0POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL)) + +/*! @brief Format value for bitfield FTM_FLTPOL_FLT0POL. */ +#define BF_FTM_FLTPOL_FLT0POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT0POL) & BM_FTM_FLTPOL_FLT0POL) + +/*! @brief Set the FLT0POL field to a new value. */ +#define BW_FTM_FLTPOL_FLT0POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT0POL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTPOL, field FLT1POL[1] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +/*@{*/ +#define BP_FTM_FLTPOL_FLT1POL (1U) /*!< Bit position for FTM_FLTPOL_FLT1POL. */ +#define BM_FTM_FLTPOL_FLT1POL (0x00000002U) /*!< Bit mask for FTM_FLTPOL_FLT1POL. */ +#define BS_FTM_FLTPOL_FLT1POL (1U) /*!< Bit field size in bits for FTM_FLTPOL_FLT1POL. */ + +/*! @brief Read current value of the FTM_FLTPOL_FLT1POL field. */ +#define BR_FTM_FLTPOL_FLT1POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL)) + +/*! @brief Format value for bitfield FTM_FLTPOL_FLT1POL. */ +#define BF_FTM_FLTPOL_FLT1POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT1POL) & BM_FTM_FLTPOL_FLT1POL) + +/*! @brief Set the FLT1POL field to a new value. */ +#define BW_FTM_FLTPOL_FLT1POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT1POL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTPOL, field FLT2POL[2] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +/*@{*/ +#define BP_FTM_FLTPOL_FLT2POL (2U) /*!< Bit position for FTM_FLTPOL_FLT2POL. */ +#define BM_FTM_FLTPOL_FLT2POL (0x00000004U) /*!< Bit mask for FTM_FLTPOL_FLT2POL. */ +#define BS_FTM_FLTPOL_FLT2POL (1U) /*!< Bit field size in bits for FTM_FLTPOL_FLT2POL. */ + +/*! @brief Read current value of the FTM_FLTPOL_FLT2POL field. */ +#define BR_FTM_FLTPOL_FLT2POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL)) + +/*! @brief Format value for bitfield FTM_FLTPOL_FLT2POL. */ +#define BF_FTM_FLTPOL_FLT2POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT2POL) & BM_FTM_FLTPOL_FLT2POL) + +/*! @brief Set the FLT2POL field to a new value. */ +#define BW_FTM_FLTPOL_FLT2POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT2POL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_FLTPOL, field FLT3POL[3] (RW) + * + * Defines the polarity of the fault input. This field is write protected. It + * can be written only when MODE[WPDIS] = 1. + * + * Values: + * - 0 - The fault input polarity is active high. A 1 at the fault input + * indicates a fault. + * - 1 - The fault input polarity is active low. A 0 at the fault input + * indicates a fault. + */ +/*@{*/ +#define BP_FTM_FLTPOL_FLT3POL (3U) /*!< Bit position for FTM_FLTPOL_FLT3POL. */ +#define BM_FTM_FLTPOL_FLT3POL (0x00000008U) /*!< Bit mask for FTM_FLTPOL_FLT3POL. */ +#define BS_FTM_FLTPOL_FLT3POL (1U) /*!< Bit field size in bits for FTM_FLTPOL_FLT3POL. */ + +/*! @brief Read current value of the FTM_FLTPOL_FLT3POL field. */ +#define BR_FTM_FLTPOL_FLT3POL(x) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL)) + +/*! @brief Format value for bitfield FTM_FLTPOL_FLT3POL. */ +#define BF_FTM_FLTPOL_FLT3POL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_FLTPOL_FLT3POL) & BM_FTM_FLTPOL_FLT3POL) + +/*! @brief Set the FLT3POL field to a new value. */ +#define BW_FTM_FLTPOL_FLT3POL(x, v) (BITBAND_ACCESS32(HW_FTM_FLTPOL_ADDR(x), BP_FTM_FLTPOL_FLT3POL) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_SYNCONF - Synchronization Configuration + ******************************************************************************/ + +/*! + * @brief HW_FTM_SYNCONF - Synchronization Configuration (RW) + * + * Reset value: 0x00000000U + * + * This register selects the PWM synchronization configuration, SWOCTRL, INVCTRL + * and CNTIN registers synchronization, if FTM clears the TRIGj bit, where j = + * 0, 1, 2, when the hardware trigger j is detected. + */ +typedef union _hw_ftm_synconf +{ + uint32_t U; + struct _hw_ftm_synconf_bitfields + { + uint32_t HWTRIGMODE : 1; /*!< [0] Hardware Trigger Mode */ + uint32_t RESERVED0 : 1; /*!< [1] */ + uint32_t CNTINC : 1; /*!< [2] CNTIN Register Synchronization */ + uint32_t RESERVED1 : 1; /*!< [3] */ + uint32_t INVC : 1; /*!< [4] INVCTRL Register Synchronization */ + uint32_t SWOC : 1; /*!< [5] SWOCTRL Register Synchronization */ + uint32_t RESERVED2 : 1; /*!< [6] */ + uint32_t SYNCMODE : 1; /*!< [7] Synchronization Mode */ + uint32_t SWRSTCNT : 1; /*!< [8] */ + uint32_t SWWRBUF : 1; /*!< [9] */ + uint32_t SWOM : 1; /*!< [10] */ + uint32_t SWINVC : 1; /*!< [11] */ + uint32_t SWSOC : 1; /*!< [12] */ + uint32_t RESERVED3 : 3; /*!< [15:13] */ + uint32_t HWRSTCNT : 1; /*!< [16] */ + uint32_t HWWRBUF : 1; /*!< [17] */ + uint32_t HWOM : 1; /*!< [18] */ + uint32_t HWINVC : 1; /*!< [19] */ + uint32_t HWSOC : 1; /*!< [20] */ + uint32_t RESERVED4 : 11; /*!< [31:21] */ + } B; +} hw_ftm_synconf_t; + +/*! + * @name Constants and macros for entire FTM_SYNCONF register + */ +/*@{*/ +#define HW_FTM_SYNCONF_ADDR(x) ((x) + 0x8CU) + +#define HW_FTM_SYNCONF(x) (*(__IO hw_ftm_synconf_t *) HW_FTM_SYNCONF_ADDR(x)) +#define HW_FTM_SYNCONF_RD(x) (HW_FTM_SYNCONF(x).U) +#define HW_FTM_SYNCONF_WR(x, v) (HW_FTM_SYNCONF(x).U = (v)) +#define HW_FTM_SYNCONF_SET(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) | (v))) +#define HW_FTM_SYNCONF_CLR(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) & ~(v))) +#define HW_FTM_SYNCONF_TOG(x, v) (HW_FTM_SYNCONF_WR(x, HW_FTM_SYNCONF_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_SYNCONF bitfields + */ + +/*! + * @name Register FTM_SYNCONF, field HWTRIGMODE[0] (RW) + * + * Values: + * - 0 - FTM clears the TRIGj bit when the hardware trigger j is detected, where + * j = 0, 1,2. + * - 1 - FTM does not clear the TRIGj bit when the hardware trigger j is + * detected, where j = 0, 1,2. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWTRIGMODE (0U) /*!< Bit position for FTM_SYNCONF_HWTRIGMODE. */ +#define BM_FTM_SYNCONF_HWTRIGMODE (0x00000001U) /*!< Bit mask for FTM_SYNCONF_HWTRIGMODE. */ +#define BS_FTM_SYNCONF_HWTRIGMODE (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWTRIGMODE. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWTRIGMODE field. */ +#define BR_FTM_SYNCONF_HWTRIGMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWTRIGMODE. */ +#define BF_FTM_SYNCONF_HWTRIGMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWTRIGMODE) & BM_FTM_SYNCONF_HWTRIGMODE) + +/*! @brief Set the HWTRIGMODE field to a new value. */ +#define BW_FTM_SYNCONF_HWTRIGMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWTRIGMODE) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field CNTINC[2] (RW) + * + * Values: + * - 0 - CNTIN register is updated with its buffer value at all rising edges of + * system clock. + * - 1 - CNTIN register is updated with its buffer value by the PWM + * synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_CNTINC (2U) /*!< Bit position for FTM_SYNCONF_CNTINC. */ +#define BM_FTM_SYNCONF_CNTINC (0x00000004U) /*!< Bit mask for FTM_SYNCONF_CNTINC. */ +#define BS_FTM_SYNCONF_CNTINC (1U) /*!< Bit field size in bits for FTM_SYNCONF_CNTINC. */ + +/*! @brief Read current value of the FTM_SYNCONF_CNTINC field. */ +#define BR_FTM_SYNCONF_CNTINC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_CNTINC. */ +#define BF_FTM_SYNCONF_CNTINC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_CNTINC) & BM_FTM_SYNCONF_CNTINC) + +/*! @brief Set the CNTINC field to a new value. */ +#define BW_FTM_SYNCONF_CNTINC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_CNTINC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field INVC[4] (RW) + * + * Values: + * - 0 - INVCTRL register is updated with its buffer value at all rising edges + * of system clock. + * - 1 - INVCTRL register is updated with its buffer value by the PWM + * synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_INVC (4U) /*!< Bit position for FTM_SYNCONF_INVC. */ +#define BM_FTM_SYNCONF_INVC (0x00000010U) /*!< Bit mask for FTM_SYNCONF_INVC. */ +#define BS_FTM_SYNCONF_INVC (1U) /*!< Bit field size in bits for FTM_SYNCONF_INVC. */ + +/*! @brief Read current value of the FTM_SYNCONF_INVC field. */ +#define BR_FTM_SYNCONF_INVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_INVC. */ +#define BF_FTM_SYNCONF_INVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_INVC) & BM_FTM_SYNCONF_INVC) + +/*! @brief Set the INVC field to a new value. */ +#define BW_FTM_SYNCONF_INVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_INVC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWOC[5] (RW) + * + * Values: + * - 0 - SWOCTRL register is updated with its buffer value at all rising edges + * of system clock. + * - 1 - SWOCTRL register is updated with its buffer value by the PWM + * synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWOC (5U) /*!< Bit position for FTM_SYNCONF_SWOC. */ +#define BM_FTM_SYNCONF_SWOC (0x00000020U) /*!< Bit mask for FTM_SYNCONF_SWOC. */ +#define BS_FTM_SYNCONF_SWOC (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWOC. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWOC field. */ +#define BR_FTM_SYNCONF_SWOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWOC. */ +#define BF_FTM_SYNCONF_SWOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWOC) & BM_FTM_SYNCONF_SWOC) + +/*! @brief Set the SWOC field to a new value. */ +#define BW_FTM_SYNCONF_SWOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SYNCMODE[7] (RW) + * + * Selects the PWM Synchronization mode. + * + * Values: + * - 0 - Legacy PWM synchronization is selected. + * - 1 - Enhanced PWM synchronization is selected. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SYNCMODE (7U) /*!< Bit position for FTM_SYNCONF_SYNCMODE. */ +#define BM_FTM_SYNCONF_SYNCMODE (0x00000080U) /*!< Bit mask for FTM_SYNCONF_SYNCMODE. */ +#define BS_FTM_SYNCONF_SYNCMODE (1U) /*!< Bit field size in bits for FTM_SYNCONF_SYNCMODE. */ + +/*! @brief Read current value of the FTM_SYNCONF_SYNCMODE field. */ +#define BR_FTM_SYNCONF_SYNCMODE(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SYNCMODE. */ +#define BF_FTM_SYNCONF_SYNCMODE(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SYNCMODE) & BM_FTM_SYNCONF_SYNCMODE) + +/*! @brief Set the SYNCMODE field to a new value. */ +#define BW_FTM_SYNCONF_SYNCMODE(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SYNCMODE) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWRSTCNT[8] (RW) + * + * FTM counter synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the FTM counter synchronization. + * - 1 - The software trigger activates the FTM counter synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWRSTCNT (8U) /*!< Bit position for FTM_SYNCONF_SWRSTCNT. */ +#define BM_FTM_SYNCONF_SWRSTCNT (0x00000100U) /*!< Bit mask for FTM_SYNCONF_SWRSTCNT. */ +#define BS_FTM_SYNCONF_SWRSTCNT (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWRSTCNT. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWRSTCNT field. */ +#define BR_FTM_SYNCONF_SWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWRSTCNT. */ +#define BF_FTM_SYNCONF_SWRSTCNT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWRSTCNT) & BM_FTM_SYNCONF_SWRSTCNT) + +/*! @brief Set the SWRSTCNT field to a new value. */ +#define BW_FTM_SYNCONF_SWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWRSTCNT) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWWRBUF[9] (RW) + * + * MOD, CNTIN, and CV registers synchronization is activated by the software + * trigger. + * + * Values: + * - 0 - The software trigger does not activate MOD, CNTIN, and CV registers + * synchronization. + * - 1 - The software trigger activates MOD, CNTIN, and CV registers + * synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWWRBUF (9U) /*!< Bit position for FTM_SYNCONF_SWWRBUF. */ +#define BM_FTM_SYNCONF_SWWRBUF (0x00000200U) /*!< Bit mask for FTM_SYNCONF_SWWRBUF. */ +#define BS_FTM_SYNCONF_SWWRBUF (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWWRBUF. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWWRBUF field. */ +#define BR_FTM_SYNCONF_SWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWWRBUF. */ +#define BF_FTM_SYNCONF_SWWRBUF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWWRBUF) & BM_FTM_SYNCONF_SWWRBUF) + +/*! @brief Set the SWWRBUF field to a new value. */ +#define BW_FTM_SYNCONF_SWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWWRBUF) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWOM[10] (RW) + * + * Output mask synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the OUTMASK register + * synchronization. + * - 1 - The software trigger activates the OUTMASK register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWOM (10U) /*!< Bit position for FTM_SYNCONF_SWOM. */ +#define BM_FTM_SYNCONF_SWOM (0x00000400U) /*!< Bit mask for FTM_SYNCONF_SWOM. */ +#define BS_FTM_SYNCONF_SWOM (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWOM. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWOM field. */ +#define BR_FTM_SYNCONF_SWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWOM. */ +#define BF_FTM_SYNCONF_SWOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWOM) & BM_FTM_SYNCONF_SWOM) + +/*! @brief Set the SWOM field to a new value. */ +#define BW_FTM_SYNCONF_SWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWOM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWINVC[11] (RW) + * + * Inverting control synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the INVCTRL register + * synchronization. + * - 1 - The software trigger activates the INVCTRL register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWINVC (11U) /*!< Bit position for FTM_SYNCONF_SWINVC. */ +#define BM_FTM_SYNCONF_SWINVC (0x00000800U) /*!< Bit mask for FTM_SYNCONF_SWINVC. */ +#define BS_FTM_SYNCONF_SWINVC (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWINVC. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWINVC field. */ +#define BR_FTM_SYNCONF_SWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWINVC. */ +#define BF_FTM_SYNCONF_SWINVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWINVC) & BM_FTM_SYNCONF_SWINVC) + +/*! @brief Set the SWINVC field to a new value. */ +#define BW_FTM_SYNCONF_SWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWINVC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field SWSOC[12] (RW) + * + * Software output control synchronization is activated by the software trigger. + * + * Values: + * - 0 - The software trigger does not activate the SWOCTRL register + * synchronization. + * - 1 - The software trigger activates the SWOCTRL register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_SWSOC (12U) /*!< Bit position for FTM_SYNCONF_SWSOC. */ +#define BM_FTM_SYNCONF_SWSOC (0x00001000U) /*!< Bit mask for FTM_SYNCONF_SWSOC. */ +#define BS_FTM_SYNCONF_SWSOC (1U) /*!< Bit field size in bits for FTM_SYNCONF_SWSOC. */ + +/*! @brief Read current value of the FTM_SYNCONF_SWSOC field. */ +#define BR_FTM_SYNCONF_SWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_SWSOC. */ +#define BF_FTM_SYNCONF_SWSOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_SWSOC) & BM_FTM_SYNCONF_SWSOC) + +/*! @brief Set the SWSOC field to a new value. */ +#define BW_FTM_SYNCONF_SWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_SWSOC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field HWRSTCNT[16] (RW) + * + * FTM counter synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the FTM counter synchronization. + * - 1 - A hardware trigger activates the FTM counter synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWRSTCNT (16U) /*!< Bit position for FTM_SYNCONF_HWRSTCNT. */ +#define BM_FTM_SYNCONF_HWRSTCNT (0x00010000U) /*!< Bit mask for FTM_SYNCONF_HWRSTCNT. */ +#define BS_FTM_SYNCONF_HWRSTCNT (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWRSTCNT. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWRSTCNT field. */ +#define BR_FTM_SYNCONF_HWRSTCNT(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWRSTCNT. */ +#define BF_FTM_SYNCONF_HWRSTCNT(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWRSTCNT) & BM_FTM_SYNCONF_HWRSTCNT) + +/*! @brief Set the HWRSTCNT field to a new value. */ +#define BW_FTM_SYNCONF_HWRSTCNT(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWRSTCNT) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field HWWRBUF[17] (RW) + * + * MOD, CNTIN, and CV registers synchronization is activated by a hardware + * trigger. + * + * Values: + * - 0 - A hardware trigger does not activate MOD, CNTIN, and CV registers + * synchronization. + * - 1 - A hardware trigger activates MOD, CNTIN, and CV registers + * synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWWRBUF (17U) /*!< Bit position for FTM_SYNCONF_HWWRBUF. */ +#define BM_FTM_SYNCONF_HWWRBUF (0x00020000U) /*!< Bit mask for FTM_SYNCONF_HWWRBUF. */ +#define BS_FTM_SYNCONF_HWWRBUF (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWWRBUF. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWWRBUF field. */ +#define BR_FTM_SYNCONF_HWWRBUF(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWWRBUF. */ +#define BF_FTM_SYNCONF_HWWRBUF(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWWRBUF) & BM_FTM_SYNCONF_HWWRBUF) + +/*! @brief Set the HWWRBUF field to a new value. */ +#define BW_FTM_SYNCONF_HWWRBUF(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWWRBUF) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field HWOM[18] (RW) + * + * Output mask synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the OUTMASK register + * synchronization. + * - 1 - A hardware trigger activates the OUTMASK register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWOM (18U) /*!< Bit position for FTM_SYNCONF_HWOM. */ +#define BM_FTM_SYNCONF_HWOM (0x00040000U) /*!< Bit mask for FTM_SYNCONF_HWOM. */ +#define BS_FTM_SYNCONF_HWOM (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWOM. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWOM field. */ +#define BR_FTM_SYNCONF_HWOM(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWOM. */ +#define BF_FTM_SYNCONF_HWOM(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWOM) & BM_FTM_SYNCONF_HWOM) + +/*! @brief Set the HWOM field to a new value. */ +#define BW_FTM_SYNCONF_HWOM(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWOM) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field HWINVC[19] (RW) + * + * Inverting control synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the INVCTRL register + * synchronization. + * - 1 - A hardware trigger activates the INVCTRL register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWINVC (19U) /*!< Bit position for FTM_SYNCONF_HWINVC. */ +#define BM_FTM_SYNCONF_HWINVC (0x00080000U) /*!< Bit mask for FTM_SYNCONF_HWINVC. */ +#define BS_FTM_SYNCONF_HWINVC (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWINVC. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWINVC field. */ +#define BR_FTM_SYNCONF_HWINVC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWINVC. */ +#define BF_FTM_SYNCONF_HWINVC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWINVC) & BM_FTM_SYNCONF_HWINVC) + +/*! @brief Set the HWINVC field to a new value. */ +#define BW_FTM_SYNCONF_HWINVC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWINVC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SYNCONF, field HWSOC[20] (RW) + * + * Software output control synchronization is activated by a hardware trigger. + * + * Values: + * - 0 - A hardware trigger does not activate the SWOCTRL register + * synchronization. + * - 1 - A hardware trigger activates the SWOCTRL register synchronization. + */ +/*@{*/ +#define BP_FTM_SYNCONF_HWSOC (20U) /*!< Bit position for FTM_SYNCONF_HWSOC. */ +#define BM_FTM_SYNCONF_HWSOC (0x00100000U) /*!< Bit mask for FTM_SYNCONF_HWSOC. */ +#define BS_FTM_SYNCONF_HWSOC (1U) /*!< Bit field size in bits for FTM_SYNCONF_HWSOC. */ + +/*! @brief Read current value of the FTM_SYNCONF_HWSOC field. */ +#define BR_FTM_SYNCONF_HWSOC(x) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC)) + +/*! @brief Format value for bitfield FTM_SYNCONF_HWSOC. */ +#define BF_FTM_SYNCONF_HWSOC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SYNCONF_HWSOC) & BM_FTM_SYNCONF_HWSOC) + +/*! @brief Set the HWSOC field to a new value. */ +#define BW_FTM_SYNCONF_HWSOC(x, v) (BITBAND_ACCESS32(HW_FTM_SYNCONF_ADDR(x), BP_FTM_SYNCONF_HWSOC) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_INVCTRL - FTM Inverting Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_INVCTRL - FTM Inverting Control (RW) + * + * Reset value: 0x00000000U + * + * This register controls when the channel (n) output becomes the channel (n+1) + * output, and channel (n+1) output becomes the channel (n) output. Each INVmEN + * bit enables the inverting operation for the corresponding pair channels m. This + * register has a write buffer. The INVmEN bit is updated by the INVCTRL + * register synchronization. + */ +typedef union _hw_ftm_invctrl +{ + uint32_t U; + struct _hw_ftm_invctrl_bitfields + { + uint32_t INV0EN : 1; /*!< [0] Pair Channels 0 Inverting Enable */ + uint32_t INV1EN : 1; /*!< [1] Pair Channels 1 Inverting Enable */ + uint32_t INV2EN : 1; /*!< [2] Pair Channels 2 Inverting Enable */ + uint32_t INV3EN : 1; /*!< [3] Pair Channels 3 Inverting Enable */ + uint32_t RESERVED0 : 28; /*!< [31:4] */ + } B; +} hw_ftm_invctrl_t; + +/*! + * @name Constants and macros for entire FTM_INVCTRL register + */ +/*@{*/ +#define HW_FTM_INVCTRL_ADDR(x) ((x) + 0x90U) + +#define HW_FTM_INVCTRL(x) (*(__IO hw_ftm_invctrl_t *) HW_FTM_INVCTRL_ADDR(x)) +#define HW_FTM_INVCTRL_RD(x) (HW_FTM_INVCTRL(x).U) +#define HW_FTM_INVCTRL_WR(x, v) (HW_FTM_INVCTRL(x).U = (v)) +#define HW_FTM_INVCTRL_SET(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) | (v))) +#define HW_FTM_INVCTRL_CLR(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) & ~(v))) +#define HW_FTM_INVCTRL_TOG(x, v) (HW_FTM_INVCTRL_WR(x, HW_FTM_INVCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_INVCTRL bitfields + */ + +/*! + * @name Register FTM_INVCTRL, field INV0EN[0] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +/*@{*/ +#define BP_FTM_INVCTRL_INV0EN (0U) /*!< Bit position for FTM_INVCTRL_INV0EN. */ +#define BM_FTM_INVCTRL_INV0EN (0x00000001U) /*!< Bit mask for FTM_INVCTRL_INV0EN. */ +#define BS_FTM_INVCTRL_INV0EN (1U) /*!< Bit field size in bits for FTM_INVCTRL_INV0EN. */ + +/*! @brief Read current value of the FTM_INVCTRL_INV0EN field. */ +#define BR_FTM_INVCTRL_INV0EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN)) + +/*! @brief Format value for bitfield FTM_INVCTRL_INV0EN. */ +#define BF_FTM_INVCTRL_INV0EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV0EN) & BM_FTM_INVCTRL_INV0EN) + +/*! @brief Set the INV0EN field to a new value. */ +#define BW_FTM_INVCTRL_INV0EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV0EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_INVCTRL, field INV1EN[1] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +/*@{*/ +#define BP_FTM_INVCTRL_INV1EN (1U) /*!< Bit position for FTM_INVCTRL_INV1EN. */ +#define BM_FTM_INVCTRL_INV1EN (0x00000002U) /*!< Bit mask for FTM_INVCTRL_INV1EN. */ +#define BS_FTM_INVCTRL_INV1EN (1U) /*!< Bit field size in bits for FTM_INVCTRL_INV1EN. */ + +/*! @brief Read current value of the FTM_INVCTRL_INV1EN field. */ +#define BR_FTM_INVCTRL_INV1EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN)) + +/*! @brief Format value for bitfield FTM_INVCTRL_INV1EN. */ +#define BF_FTM_INVCTRL_INV1EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV1EN) & BM_FTM_INVCTRL_INV1EN) + +/*! @brief Set the INV1EN field to a new value. */ +#define BW_FTM_INVCTRL_INV1EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV1EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_INVCTRL, field INV2EN[2] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +/*@{*/ +#define BP_FTM_INVCTRL_INV2EN (2U) /*!< Bit position for FTM_INVCTRL_INV2EN. */ +#define BM_FTM_INVCTRL_INV2EN (0x00000004U) /*!< Bit mask for FTM_INVCTRL_INV2EN. */ +#define BS_FTM_INVCTRL_INV2EN (1U) /*!< Bit field size in bits for FTM_INVCTRL_INV2EN. */ + +/*! @brief Read current value of the FTM_INVCTRL_INV2EN field. */ +#define BR_FTM_INVCTRL_INV2EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN)) + +/*! @brief Format value for bitfield FTM_INVCTRL_INV2EN. */ +#define BF_FTM_INVCTRL_INV2EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV2EN) & BM_FTM_INVCTRL_INV2EN) + +/*! @brief Set the INV2EN field to a new value. */ +#define BW_FTM_INVCTRL_INV2EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV2EN) = (v)) +/*@}*/ + +/*! + * @name Register FTM_INVCTRL, field INV3EN[3] (RW) + * + * Values: + * - 0 - Inverting is disabled. + * - 1 - Inverting is enabled. + */ +/*@{*/ +#define BP_FTM_INVCTRL_INV3EN (3U) /*!< Bit position for FTM_INVCTRL_INV3EN. */ +#define BM_FTM_INVCTRL_INV3EN (0x00000008U) /*!< Bit mask for FTM_INVCTRL_INV3EN. */ +#define BS_FTM_INVCTRL_INV3EN (1U) /*!< Bit field size in bits for FTM_INVCTRL_INV3EN. */ + +/*! @brief Read current value of the FTM_INVCTRL_INV3EN field. */ +#define BR_FTM_INVCTRL_INV3EN(x) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN)) + +/*! @brief Format value for bitfield FTM_INVCTRL_INV3EN. */ +#define BF_FTM_INVCTRL_INV3EN(v) ((uint32_t)((uint32_t)(v) << BP_FTM_INVCTRL_INV3EN) & BM_FTM_INVCTRL_INV3EN) + +/*! @brief Set the INV3EN field to a new value. */ +#define BW_FTM_INVCTRL_INV3EN(x, v) (BITBAND_ACCESS32(HW_FTM_INVCTRL_ADDR(x), BP_FTM_INVCTRL_INV3EN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_SWOCTRL - FTM Software Output Control + ******************************************************************************/ + +/*! + * @brief HW_FTM_SWOCTRL - FTM Software Output Control (RW) + * + * Reset value: 0x00000000U + * + * This register enables software control of channel (n) output and defines the + * value forced to the channel (n) output: The CHnOC bits enable the control of + * the corresponding channel (n) output by software. The CHnOCV bits select the + * value that is forced at the corresponding channel (n) output. This register has + * a write buffer. The fields are updated by the SWOCTRL register synchronization. + */ +typedef union _hw_ftm_swoctrl +{ + uint32_t U; + struct _hw_ftm_swoctrl_bitfields + { + uint32_t CH0OC : 1; /*!< [0] Channel 0 Software Output Control Enable + * */ + uint32_t CH1OC : 1; /*!< [1] Channel 1 Software Output Control Enable + * */ + uint32_t CH2OC : 1; /*!< [2] Channel 2 Software Output Control Enable + * */ + uint32_t CH3OC : 1; /*!< [3] Channel 3 Software Output Control Enable + * */ + uint32_t CH4OC : 1; /*!< [4] Channel 4 Software Output Control Enable + * */ + uint32_t CH5OC : 1; /*!< [5] Channel 5 Software Output Control Enable + * */ + uint32_t CH6OC : 1; /*!< [6] Channel 6 Software Output Control Enable + * */ + uint32_t CH7OC : 1; /*!< [7] Channel 7 Software Output Control Enable + * */ + uint32_t CH0OCV : 1; /*!< [8] Channel 0 Software Output Control Value + * */ + uint32_t CH1OCV : 1; /*!< [9] Channel 1 Software Output Control Value + * */ + uint32_t CH2OCV : 1; /*!< [10] Channel 2 Software Output Control + * Value */ + uint32_t CH3OCV : 1; /*!< [11] Channel 3 Software Output Control + * Value */ + uint32_t CH4OCV : 1; /*!< [12] Channel 4 Software Output Control + * Value */ + uint32_t CH5OCV : 1; /*!< [13] Channel 5 Software Output Control + * Value */ + uint32_t CH6OCV : 1; /*!< [14] Channel 6 Software Output Control + * Value */ + uint32_t CH7OCV : 1; /*!< [15] Channel 7 Software Output Control + * Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_ftm_swoctrl_t; + +/*! + * @name Constants and macros for entire FTM_SWOCTRL register + */ +/*@{*/ +#define HW_FTM_SWOCTRL_ADDR(x) ((x) + 0x94U) + +#define HW_FTM_SWOCTRL(x) (*(__IO hw_ftm_swoctrl_t *) HW_FTM_SWOCTRL_ADDR(x)) +#define HW_FTM_SWOCTRL_RD(x) (HW_FTM_SWOCTRL(x).U) +#define HW_FTM_SWOCTRL_WR(x, v) (HW_FTM_SWOCTRL(x).U = (v)) +#define HW_FTM_SWOCTRL_SET(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) | (v))) +#define HW_FTM_SWOCTRL_CLR(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) & ~(v))) +#define HW_FTM_SWOCTRL_TOG(x, v) (HW_FTM_SWOCTRL_WR(x, HW_FTM_SWOCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_SWOCTRL bitfields + */ + +/*! + * @name Register FTM_SWOCTRL, field CH0OC[0] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH0OC (0U) /*!< Bit position for FTM_SWOCTRL_CH0OC. */ +#define BM_FTM_SWOCTRL_CH0OC (0x00000001U) /*!< Bit mask for FTM_SWOCTRL_CH0OC. */ +#define BS_FTM_SWOCTRL_CH0OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH0OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH0OC field. */ +#define BR_FTM_SWOCTRL_CH0OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH0OC. */ +#define BF_FTM_SWOCTRL_CH0OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH0OC) & BM_FTM_SWOCTRL_CH0OC) + +/*! @brief Set the CH0OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH0OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH1OC[1] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH1OC (1U) /*!< Bit position for FTM_SWOCTRL_CH1OC. */ +#define BM_FTM_SWOCTRL_CH1OC (0x00000002U) /*!< Bit mask for FTM_SWOCTRL_CH1OC. */ +#define BS_FTM_SWOCTRL_CH1OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH1OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH1OC field. */ +#define BR_FTM_SWOCTRL_CH1OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH1OC. */ +#define BF_FTM_SWOCTRL_CH1OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH1OC) & BM_FTM_SWOCTRL_CH1OC) + +/*! @brief Set the CH1OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH1OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH2OC[2] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH2OC (2U) /*!< Bit position for FTM_SWOCTRL_CH2OC. */ +#define BM_FTM_SWOCTRL_CH2OC (0x00000004U) /*!< Bit mask for FTM_SWOCTRL_CH2OC. */ +#define BS_FTM_SWOCTRL_CH2OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH2OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH2OC field. */ +#define BR_FTM_SWOCTRL_CH2OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH2OC. */ +#define BF_FTM_SWOCTRL_CH2OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH2OC) & BM_FTM_SWOCTRL_CH2OC) + +/*! @brief Set the CH2OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH2OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH3OC[3] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH3OC (3U) /*!< Bit position for FTM_SWOCTRL_CH3OC. */ +#define BM_FTM_SWOCTRL_CH3OC (0x00000008U) /*!< Bit mask for FTM_SWOCTRL_CH3OC. */ +#define BS_FTM_SWOCTRL_CH3OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH3OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH3OC field. */ +#define BR_FTM_SWOCTRL_CH3OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH3OC. */ +#define BF_FTM_SWOCTRL_CH3OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH3OC) & BM_FTM_SWOCTRL_CH3OC) + +/*! @brief Set the CH3OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH3OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH4OC[4] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH4OC (4U) /*!< Bit position for FTM_SWOCTRL_CH4OC. */ +#define BM_FTM_SWOCTRL_CH4OC (0x00000010U) /*!< Bit mask for FTM_SWOCTRL_CH4OC. */ +#define BS_FTM_SWOCTRL_CH4OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH4OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH4OC field. */ +#define BR_FTM_SWOCTRL_CH4OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH4OC. */ +#define BF_FTM_SWOCTRL_CH4OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH4OC) & BM_FTM_SWOCTRL_CH4OC) + +/*! @brief Set the CH4OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH4OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH5OC[5] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH5OC (5U) /*!< Bit position for FTM_SWOCTRL_CH5OC. */ +#define BM_FTM_SWOCTRL_CH5OC (0x00000020U) /*!< Bit mask for FTM_SWOCTRL_CH5OC. */ +#define BS_FTM_SWOCTRL_CH5OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH5OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH5OC field. */ +#define BR_FTM_SWOCTRL_CH5OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH5OC. */ +#define BF_FTM_SWOCTRL_CH5OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH5OC) & BM_FTM_SWOCTRL_CH5OC) + +/*! @brief Set the CH5OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH5OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH6OC[6] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH6OC (6U) /*!< Bit position for FTM_SWOCTRL_CH6OC. */ +#define BM_FTM_SWOCTRL_CH6OC (0x00000040U) /*!< Bit mask for FTM_SWOCTRL_CH6OC. */ +#define BS_FTM_SWOCTRL_CH6OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH6OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH6OC field. */ +#define BR_FTM_SWOCTRL_CH6OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH6OC. */ +#define BF_FTM_SWOCTRL_CH6OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH6OC) & BM_FTM_SWOCTRL_CH6OC) + +/*! @brief Set the CH6OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH6OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH7OC[7] (RW) + * + * Values: + * - 0 - The channel output is not affected by software output control. + * - 1 - The channel output is affected by software output control. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH7OC (7U) /*!< Bit position for FTM_SWOCTRL_CH7OC. */ +#define BM_FTM_SWOCTRL_CH7OC (0x00000080U) /*!< Bit mask for FTM_SWOCTRL_CH7OC. */ +#define BS_FTM_SWOCTRL_CH7OC (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH7OC. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH7OC field. */ +#define BR_FTM_SWOCTRL_CH7OC(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH7OC. */ +#define BF_FTM_SWOCTRL_CH7OC(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH7OC) & BM_FTM_SWOCTRL_CH7OC) + +/*! @brief Set the CH7OC field to a new value. */ +#define BW_FTM_SWOCTRL_CH7OC(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OC) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH0OCV[8] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH0OCV (8U) /*!< Bit position for FTM_SWOCTRL_CH0OCV. */ +#define BM_FTM_SWOCTRL_CH0OCV (0x00000100U) /*!< Bit mask for FTM_SWOCTRL_CH0OCV. */ +#define BS_FTM_SWOCTRL_CH0OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH0OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH0OCV field. */ +#define BR_FTM_SWOCTRL_CH0OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH0OCV. */ +#define BF_FTM_SWOCTRL_CH0OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH0OCV) & BM_FTM_SWOCTRL_CH0OCV) + +/*! @brief Set the CH0OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH0OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH0OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH1OCV[9] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH1OCV (9U) /*!< Bit position for FTM_SWOCTRL_CH1OCV. */ +#define BM_FTM_SWOCTRL_CH1OCV (0x00000200U) /*!< Bit mask for FTM_SWOCTRL_CH1OCV. */ +#define BS_FTM_SWOCTRL_CH1OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH1OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH1OCV field. */ +#define BR_FTM_SWOCTRL_CH1OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH1OCV. */ +#define BF_FTM_SWOCTRL_CH1OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH1OCV) & BM_FTM_SWOCTRL_CH1OCV) + +/*! @brief Set the CH1OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH1OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH1OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH2OCV[10] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH2OCV (10U) /*!< Bit position for FTM_SWOCTRL_CH2OCV. */ +#define BM_FTM_SWOCTRL_CH2OCV (0x00000400U) /*!< Bit mask for FTM_SWOCTRL_CH2OCV. */ +#define BS_FTM_SWOCTRL_CH2OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH2OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH2OCV field. */ +#define BR_FTM_SWOCTRL_CH2OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH2OCV. */ +#define BF_FTM_SWOCTRL_CH2OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH2OCV) & BM_FTM_SWOCTRL_CH2OCV) + +/*! @brief Set the CH2OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH2OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH2OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH3OCV[11] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH3OCV (11U) /*!< Bit position for FTM_SWOCTRL_CH3OCV. */ +#define BM_FTM_SWOCTRL_CH3OCV (0x00000800U) /*!< Bit mask for FTM_SWOCTRL_CH3OCV. */ +#define BS_FTM_SWOCTRL_CH3OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH3OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH3OCV field. */ +#define BR_FTM_SWOCTRL_CH3OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH3OCV. */ +#define BF_FTM_SWOCTRL_CH3OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH3OCV) & BM_FTM_SWOCTRL_CH3OCV) + +/*! @brief Set the CH3OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH3OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH3OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH4OCV[12] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH4OCV (12U) /*!< Bit position for FTM_SWOCTRL_CH4OCV. */ +#define BM_FTM_SWOCTRL_CH4OCV (0x00001000U) /*!< Bit mask for FTM_SWOCTRL_CH4OCV. */ +#define BS_FTM_SWOCTRL_CH4OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH4OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH4OCV field. */ +#define BR_FTM_SWOCTRL_CH4OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH4OCV. */ +#define BF_FTM_SWOCTRL_CH4OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH4OCV) & BM_FTM_SWOCTRL_CH4OCV) + +/*! @brief Set the CH4OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH4OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH4OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH5OCV[13] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH5OCV (13U) /*!< Bit position for FTM_SWOCTRL_CH5OCV. */ +#define BM_FTM_SWOCTRL_CH5OCV (0x00002000U) /*!< Bit mask for FTM_SWOCTRL_CH5OCV. */ +#define BS_FTM_SWOCTRL_CH5OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH5OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH5OCV field. */ +#define BR_FTM_SWOCTRL_CH5OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH5OCV. */ +#define BF_FTM_SWOCTRL_CH5OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH5OCV) & BM_FTM_SWOCTRL_CH5OCV) + +/*! @brief Set the CH5OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH5OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH5OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH6OCV[14] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH6OCV (14U) /*!< Bit position for FTM_SWOCTRL_CH6OCV. */ +#define BM_FTM_SWOCTRL_CH6OCV (0x00004000U) /*!< Bit mask for FTM_SWOCTRL_CH6OCV. */ +#define BS_FTM_SWOCTRL_CH6OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH6OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH6OCV field. */ +#define BR_FTM_SWOCTRL_CH6OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH6OCV. */ +#define BF_FTM_SWOCTRL_CH6OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH6OCV) & BM_FTM_SWOCTRL_CH6OCV) + +/*! @brief Set the CH6OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH6OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH6OCV) = (v)) +/*@}*/ + +/*! + * @name Register FTM_SWOCTRL, field CH7OCV[15] (RW) + * + * Values: + * - 0 - The software output control forces 0 to the channel output. + * - 1 - The software output control forces 1 to the channel output. + */ +/*@{*/ +#define BP_FTM_SWOCTRL_CH7OCV (15U) /*!< Bit position for FTM_SWOCTRL_CH7OCV. */ +#define BM_FTM_SWOCTRL_CH7OCV (0x00008000U) /*!< Bit mask for FTM_SWOCTRL_CH7OCV. */ +#define BS_FTM_SWOCTRL_CH7OCV (1U) /*!< Bit field size in bits for FTM_SWOCTRL_CH7OCV. */ + +/*! @brief Read current value of the FTM_SWOCTRL_CH7OCV field. */ +#define BR_FTM_SWOCTRL_CH7OCV(x) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV)) + +/*! @brief Format value for bitfield FTM_SWOCTRL_CH7OCV. */ +#define BF_FTM_SWOCTRL_CH7OCV(v) ((uint32_t)((uint32_t)(v) << BP_FTM_SWOCTRL_CH7OCV) & BM_FTM_SWOCTRL_CH7OCV) + +/*! @brief Set the CH7OCV field to a new value. */ +#define BW_FTM_SWOCTRL_CH7OCV(x, v) (BITBAND_ACCESS32(HW_FTM_SWOCTRL_ADDR(x), BP_FTM_SWOCTRL_CH7OCV) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_FTM_PWMLOAD - FTM PWM Load + ******************************************************************************/ + +/*! + * @brief HW_FTM_PWMLOAD - FTM PWM Load (RW) + * + * Reset value: 0x00000000U + * + * Enables the loading of the MOD, CNTIN, C(n)V, and C(n+1)V registers with the + * values of their write buffers when the FTM counter changes from the MOD + * register value to its next value or when a channel (j) match occurs. A match occurs + * for the channel (j) when FTM counter = C(j)V. + */ +typedef union _hw_ftm_pwmload +{ + uint32_t U; + struct _hw_ftm_pwmload_bitfields + { + uint32_t CH0SEL : 1; /*!< [0] Channel 0 Select */ + uint32_t CH1SEL : 1; /*!< [1] Channel 1 Select */ + uint32_t CH2SEL : 1; /*!< [2] Channel 2 Select */ + uint32_t CH3SEL : 1; /*!< [3] Channel 3 Select */ + uint32_t CH4SEL : 1; /*!< [4] Channel 4 Select */ + uint32_t CH5SEL : 1; /*!< [5] Channel 5 Select */ + uint32_t CH6SEL : 1; /*!< [6] Channel 6 Select */ + uint32_t CH7SEL : 1; /*!< [7] Channel 7 Select */ + uint32_t RESERVED0 : 1; /*!< [8] */ + uint32_t LDOK : 1; /*!< [9] Load Enable */ + uint32_t RESERVED1 : 22; /*!< [31:10] */ + } B; +} hw_ftm_pwmload_t; + +/*! + * @name Constants and macros for entire FTM_PWMLOAD register + */ +/*@{*/ +#define HW_FTM_PWMLOAD_ADDR(x) ((x) + 0x98U) + +#define HW_FTM_PWMLOAD(x) (*(__IO hw_ftm_pwmload_t *) HW_FTM_PWMLOAD_ADDR(x)) +#define HW_FTM_PWMLOAD_RD(x) (HW_FTM_PWMLOAD(x).U) +#define HW_FTM_PWMLOAD_WR(x, v) (HW_FTM_PWMLOAD(x).U = (v)) +#define HW_FTM_PWMLOAD_SET(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) | (v))) +#define HW_FTM_PWMLOAD_CLR(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) & ~(v))) +#define HW_FTM_PWMLOAD_TOG(x, v) (HW_FTM_PWMLOAD_WR(x, HW_FTM_PWMLOAD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual FTM_PWMLOAD bitfields + */ + +/*! + * @name Register FTM_PWMLOAD, field CH0SEL[0] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH0SEL (0U) /*!< Bit position for FTM_PWMLOAD_CH0SEL. */ +#define BM_FTM_PWMLOAD_CH0SEL (0x00000001U) /*!< Bit mask for FTM_PWMLOAD_CH0SEL. */ +#define BS_FTM_PWMLOAD_CH0SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH0SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH0SEL field. */ +#define BR_FTM_PWMLOAD_CH0SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH0SEL. */ +#define BF_FTM_PWMLOAD_CH0SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH0SEL) & BM_FTM_PWMLOAD_CH0SEL) + +/*! @brief Set the CH0SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH0SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH0SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH1SEL[1] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH1SEL (1U) /*!< Bit position for FTM_PWMLOAD_CH1SEL. */ +#define BM_FTM_PWMLOAD_CH1SEL (0x00000002U) /*!< Bit mask for FTM_PWMLOAD_CH1SEL. */ +#define BS_FTM_PWMLOAD_CH1SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH1SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH1SEL field. */ +#define BR_FTM_PWMLOAD_CH1SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH1SEL. */ +#define BF_FTM_PWMLOAD_CH1SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH1SEL) & BM_FTM_PWMLOAD_CH1SEL) + +/*! @brief Set the CH1SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH1SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH1SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH2SEL[2] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH2SEL (2U) /*!< Bit position for FTM_PWMLOAD_CH2SEL. */ +#define BM_FTM_PWMLOAD_CH2SEL (0x00000004U) /*!< Bit mask for FTM_PWMLOAD_CH2SEL. */ +#define BS_FTM_PWMLOAD_CH2SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH2SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH2SEL field. */ +#define BR_FTM_PWMLOAD_CH2SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH2SEL. */ +#define BF_FTM_PWMLOAD_CH2SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH2SEL) & BM_FTM_PWMLOAD_CH2SEL) + +/*! @brief Set the CH2SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH2SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH2SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH3SEL[3] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH3SEL (3U) /*!< Bit position for FTM_PWMLOAD_CH3SEL. */ +#define BM_FTM_PWMLOAD_CH3SEL (0x00000008U) /*!< Bit mask for FTM_PWMLOAD_CH3SEL. */ +#define BS_FTM_PWMLOAD_CH3SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH3SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH3SEL field. */ +#define BR_FTM_PWMLOAD_CH3SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH3SEL. */ +#define BF_FTM_PWMLOAD_CH3SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH3SEL) & BM_FTM_PWMLOAD_CH3SEL) + +/*! @brief Set the CH3SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH3SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH3SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH4SEL[4] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH4SEL (4U) /*!< Bit position for FTM_PWMLOAD_CH4SEL. */ +#define BM_FTM_PWMLOAD_CH4SEL (0x00000010U) /*!< Bit mask for FTM_PWMLOAD_CH4SEL. */ +#define BS_FTM_PWMLOAD_CH4SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH4SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH4SEL field. */ +#define BR_FTM_PWMLOAD_CH4SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH4SEL. */ +#define BF_FTM_PWMLOAD_CH4SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH4SEL) & BM_FTM_PWMLOAD_CH4SEL) + +/*! @brief Set the CH4SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH4SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH4SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH5SEL[5] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH5SEL (5U) /*!< Bit position for FTM_PWMLOAD_CH5SEL. */ +#define BM_FTM_PWMLOAD_CH5SEL (0x00000020U) /*!< Bit mask for FTM_PWMLOAD_CH5SEL. */ +#define BS_FTM_PWMLOAD_CH5SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH5SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH5SEL field. */ +#define BR_FTM_PWMLOAD_CH5SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH5SEL. */ +#define BF_FTM_PWMLOAD_CH5SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH5SEL) & BM_FTM_PWMLOAD_CH5SEL) + +/*! @brief Set the CH5SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH5SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH5SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH6SEL[6] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH6SEL (6U) /*!< Bit position for FTM_PWMLOAD_CH6SEL. */ +#define BM_FTM_PWMLOAD_CH6SEL (0x00000040U) /*!< Bit mask for FTM_PWMLOAD_CH6SEL. */ +#define BS_FTM_PWMLOAD_CH6SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH6SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH6SEL field. */ +#define BR_FTM_PWMLOAD_CH6SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH6SEL. */ +#define BF_FTM_PWMLOAD_CH6SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH6SEL) & BM_FTM_PWMLOAD_CH6SEL) + +/*! @brief Set the CH6SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH6SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH6SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field CH7SEL[7] (RW) + * + * Values: + * - 0 - Do not include the channel in the matching process. + * - 1 - Include the channel in the matching process. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_CH7SEL (7U) /*!< Bit position for FTM_PWMLOAD_CH7SEL. */ +#define BM_FTM_PWMLOAD_CH7SEL (0x00000080U) /*!< Bit mask for FTM_PWMLOAD_CH7SEL. */ +#define BS_FTM_PWMLOAD_CH7SEL (1U) /*!< Bit field size in bits for FTM_PWMLOAD_CH7SEL. */ + +/*! @brief Read current value of the FTM_PWMLOAD_CH7SEL field. */ +#define BR_FTM_PWMLOAD_CH7SEL(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_CH7SEL. */ +#define BF_FTM_PWMLOAD_CH7SEL(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_CH7SEL) & BM_FTM_PWMLOAD_CH7SEL) + +/*! @brief Set the CH7SEL field to a new value. */ +#define BW_FTM_PWMLOAD_CH7SEL(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_CH7SEL) = (v)) +/*@}*/ + +/*! + * @name Register FTM_PWMLOAD, field LDOK[9] (RW) + * + * Enables the loading of the MOD, CNTIN, and CV registers with the values of + * their write buffers. + * + * Values: + * - 0 - Loading updated values is disabled. + * - 1 - Loading updated values is enabled. + */ +/*@{*/ +#define BP_FTM_PWMLOAD_LDOK (9U) /*!< Bit position for FTM_PWMLOAD_LDOK. */ +#define BM_FTM_PWMLOAD_LDOK (0x00000200U) /*!< Bit mask for FTM_PWMLOAD_LDOK. */ +#define BS_FTM_PWMLOAD_LDOK (1U) /*!< Bit field size in bits for FTM_PWMLOAD_LDOK. */ + +/*! @brief Read current value of the FTM_PWMLOAD_LDOK field. */ +#define BR_FTM_PWMLOAD_LDOK(x) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK)) + +/*! @brief Format value for bitfield FTM_PWMLOAD_LDOK. */ +#define BF_FTM_PWMLOAD_LDOK(v) ((uint32_t)((uint32_t)(v) << BP_FTM_PWMLOAD_LDOK) & BM_FTM_PWMLOAD_LDOK) + +/*! @brief Set the LDOK field to a new value. */ +#define BW_FTM_PWMLOAD_LDOK(x, v) (BITBAND_ACCESS32(HW_FTM_PWMLOAD_ADDR(x), BP_FTM_PWMLOAD_LDOK) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_ftm_t - module struct + ******************************************************************************/ +/*! + * @brief All FTM module registers. + */ +#pragma pack(1) +typedef struct _hw_ftm +{ + __IO hw_ftm_sc_t SC; /*!< [0x0] Status And Control */ + __IO hw_ftm_cnt_t CNT; /*!< [0x4] Counter */ + __IO hw_ftm_mod_t MOD; /*!< [0x8] Modulo */ + struct { + __IO hw_ftm_cnsc_t CnSC; /*!< [0xC] Channel (n) Status And Control */ + __IO hw_ftm_cnv_t CnV; /*!< [0x10] Channel (n) Value */ + } CONTROLS[8]; + __IO hw_ftm_cntin_t CNTIN; /*!< [0x4C] Counter Initial Value */ + __IO hw_ftm_status_t STATUS; /*!< [0x50] Capture And Compare Status */ + __IO hw_ftm_mode_t MODE; /*!< [0x54] Features Mode Selection */ + __IO hw_ftm_sync_t SYNC; /*!< [0x58] Synchronization */ + __IO hw_ftm_outinit_t OUTINIT; /*!< [0x5C] Initial State For Channels Output */ + __IO hw_ftm_outmask_t OUTMASK; /*!< [0x60] Output Mask */ + __IO hw_ftm_combine_t COMBINE; /*!< [0x64] Function For Linked Channels */ + __IO hw_ftm_deadtime_t DEADTIME; /*!< [0x68] Deadtime Insertion Control */ + __IO hw_ftm_exttrig_t EXTTRIG; /*!< [0x6C] FTM External Trigger */ + __IO hw_ftm_pol_t POL; /*!< [0x70] Channels Polarity */ + __IO hw_ftm_fms_t FMS; /*!< [0x74] Fault Mode Status */ + __IO hw_ftm_filter_t FILTER; /*!< [0x78] Input Capture Filter Control */ + __IO hw_ftm_fltctrl_t FLTCTRL; /*!< [0x7C] Fault Control */ + __IO hw_ftm_qdctrl_t QDCTRL; /*!< [0x80] Quadrature Decoder Control And Status */ + __IO hw_ftm_conf_t CONF; /*!< [0x84] Configuration */ + __IO hw_ftm_fltpol_t FLTPOL; /*!< [0x88] FTM Fault Input Polarity */ + __IO hw_ftm_synconf_t SYNCONF; /*!< [0x8C] Synchronization Configuration */ + __IO hw_ftm_invctrl_t INVCTRL; /*!< [0x90] FTM Inverting Control */ + __IO hw_ftm_swoctrl_t SWOCTRL; /*!< [0x94] FTM Software Output Control */ + __IO hw_ftm_pwmload_t PWMLOAD; /*!< [0x98] FTM PWM Load */ +} hw_ftm_t; +#pragma pack() + +/*! @brief Macro to access all FTM registers. */ +/*! @param x FTM module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_FTM(FTM0_BASE)</code>. */ +#define HW_FTM(x) (*(hw_ftm_t *)(x)) + +#endif /* __HW_FTM_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_gpio.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_gpio.h new file mode 100644 index 0000000000..24e3b452a1 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_gpio.h @@ -0,0 +1,487 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_GPIO_REGISTERS_H__ +#define __HW_GPIO_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 GPIO + * + * General Purpose Input/Output + * + * Registers defined in this header file: + * - HW_GPIO_PDOR - Port Data Output Register + * - HW_GPIO_PSOR - Port Set Output Register + * - HW_GPIO_PCOR - Port Clear Output Register + * - HW_GPIO_PTOR - Port Toggle Output Register + * - HW_GPIO_PDIR - Port Data Input Register + * - HW_GPIO_PDDR - Port Data Direction Register + * + * - hw_gpio_t - Struct containing all module registers. + */ + +#define HW_GPIO_INSTANCE_COUNT (5U) /*!< Number of instances of the GPIO module. */ +#define HW_GPIOA (0U) /*!< Instance number for GPIOA. */ +#define HW_GPIOB (1U) /*!< Instance number for GPIOB. */ +#define HW_GPIOC (2U) /*!< Instance number for GPIOC. */ +#define HW_GPIOD (3U) /*!< Instance number for GPIOD. */ +#define HW_GPIOE (4U) /*!< Instance number for GPIOE. */ + +/******************************************************************************* + * HW_GPIO_PDOR - Port Data Output Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PDOR - Port Data Output Register (RW) + * + * Reset value: 0x00000000U + * + * This register configures the logic levels that are driven on each + * general-purpose output pins. Do not modify pin configuration registers associated with + * pins not available in your selected package. All unbonded pins not available in + * your package will default to DISABLE state for lowest power consumption. + */ +typedef union _hw_gpio_pdor +{ + uint32_t U; + struct _hw_gpio_pdor_bitfields + { + uint32_t PDO : 32; /*!< [31:0] Port Data Output */ + } B; +} hw_gpio_pdor_t; + +/*! + * @name Constants and macros for entire GPIO_PDOR register + */ +/*@{*/ +#define HW_GPIO_PDOR_ADDR(x) ((x) + 0x0U) + +#define HW_GPIO_PDOR(x) (*(__IO hw_gpio_pdor_t *) HW_GPIO_PDOR_ADDR(x)) +#define HW_GPIO_PDOR_RD(x) (HW_GPIO_PDOR(x).U) +#define HW_GPIO_PDOR_WR(x, v) (HW_GPIO_PDOR(x).U = (v)) +#define HW_GPIO_PDOR_SET(x, v) (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) | (v))) +#define HW_GPIO_PDOR_CLR(x, v) (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) & ~(v))) +#define HW_GPIO_PDOR_TOG(x, v) (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PDOR bitfields + */ + +/*! + * @name Register GPIO_PDOR, field PDO[31:0] (RW) + * + * Register bits for unbonded pins return a undefined value when read. + * + * Values: + * - 0 - Logic level 0 is driven on pin, provided pin is configured for + * general-purpose output. + * - 1 - Logic level 1 is driven on pin, provided pin is configured for + * general-purpose output. + */ +/*@{*/ +#define BP_GPIO_PDOR_PDO (0U) /*!< Bit position for GPIO_PDOR_PDO. */ +#define BM_GPIO_PDOR_PDO (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDOR_PDO. */ +#define BS_GPIO_PDOR_PDO (32U) /*!< Bit field size in bits for GPIO_PDOR_PDO. */ + +/*! @brief Read current value of the GPIO_PDOR_PDO field. */ +#define BR_GPIO_PDOR_PDO(x) (HW_GPIO_PDOR(x).U) + +/*! @brief Format value for bitfield GPIO_PDOR_PDO. */ +#define BF_GPIO_PDOR_PDO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PDOR_PDO) & BM_GPIO_PDOR_PDO) + +/*! @brief Set the PDO field to a new value. */ +#define BW_GPIO_PDOR_PDO(x, v) (HW_GPIO_PDOR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_GPIO_PSOR - Port Set Output Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PSOR - Port Set Output Register (WORZ) + * + * Reset value: 0x00000000U + * + * This register configures whether to set the fields of the PDOR. + */ +typedef union _hw_gpio_psor +{ + uint32_t U; + struct _hw_gpio_psor_bitfields + { + uint32_t PTSO : 32; /*!< [31:0] Port Set Output */ + } B; +} hw_gpio_psor_t; + +/*! + * @name Constants and macros for entire GPIO_PSOR register + */ +/*@{*/ +#define HW_GPIO_PSOR_ADDR(x) ((x) + 0x4U) + +#define HW_GPIO_PSOR(x) (*(__O hw_gpio_psor_t *) HW_GPIO_PSOR_ADDR(x)) +#define HW_GPIO_PSOR_RD(x) (HW_GPIO_PSOR(x).U) +#define HW_GPIO_PSOR_WR(x, v) (HW_GPIO_PSOR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PSOR bitfields + */ + +/*! + * @name Register GPIO_PSOR, field PTSO[31:0] (WORZ) + * + * Writing to this register will update the contents of the corresponding bit in + * the PDOR as follows: + * + * Values: + * - 0 - Corresponding bit in PDORn does not change. + * - 1 - Corresponding bit in PDORn is set to logic 1. + */ +/*@{*/ +#define BP_GPIO_PSOR_PTSO (0U) /*!< Bit position for GPIO_PSOR_PTSO. */ +#define BM_GPIO_PSOR_PTSO (0xFFFFFFFFU) /*!< Bit mask for GPIO_PSOR_PTSO. */ +#define BS_GPIO_PSOR_PTSO (32U) /*!< Bit field size in bits for GPIO_PSOR_PTSO. */ + +/*! @brief Format value for bitfield GPIO_PSOR_PTSO. */ +#define BF_GPIO_PSOR_PTSO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PSOR_PTSO) & BM_GPIO_PSOR_PTSO) + +/*! @brief Set the PTSO field to a new value. */ +#define BW_GPIO_PSOR_PTSO(x, v) (HW_GPIO_PSOR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_GPIO_PCOR - Port Clear Output Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PCOR - Port Clear Output Register (WORZ) + * + * Reset value: 0x00000000U + * + * This register configures whether to clear the fields of PDOR. + */ +typedef union _hw_gpio_pcor +{ + uint32_t U; + struct _hw_gpio_pcor_bitfields + { + uint32_t PTCO : 32; /*!< [31:0] Port Clear Output */ + } B; +} hw_gpio_pcor_t; + +/*! + * @name Constants and macros for entire GPIO_PCOR register + */ +/*@{*/ +#define HW_GPIO_PCOR_ADDR(x) ((x) + 0x8U) + +#define HW_GPIO_PCOR(x) (*(__O hw_gpio_pcor_t *) HW_GPIO_PCOR_ADDR(x)) +#define HW_GPIO_PCOR_RD(x) (HW_GPIO_PCOR(x).U) +#define HW_GPIO_PCOR_WR(x, v) (HW_GPIO_PCOR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PCOR bitfields + */ + +/*! + * @name Register GPIO_PCOR, field PTCO[31:0] (WORZ) + * + * Writing to this register will update the contents of the corresponding bit in + * the Port Data Output Register (PDOR) as follows: + * + * Values: + * - 0 - Corresponding bit in PDORn does not change. + * - 1 - Corresponding bit in PDORn is cleared to logic 0. + */ +/*@{*/ +#define BP_GPIO_PCOR_PTCO (0U) /*!< Bit position for GPIO_PCOR_PTCO. */ +#define BM_GPIO_PCOR_PTCO (0xFFFFFFFFU) /*!< Bit mask for GPIO_PCOR_PTCO. */ +#define BS_GPIO_PCOR_PTCO (32U) /*!< Bit field size in bits for GPIO_PCOR_PTCO. */ + +/*! @brief Format value for bitfield GPIO_PCOR_PTCO. */ +#define BF_GPIO_PCOR_PTCO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PCOR_PTCO) & BM_GPIO_PCOR_PTCO) + +/*! @brief Set the PTCO field to a new value. */ +#define BW_GPIO_PCOR_PTCO(x, v) (HW_GPIO_PCOR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_GPIO_PTOR - Port Toggle Output Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PTOR - Port Toggle Output Register (WORZ) + * + * Reset value: 0x00000000U + */ +typedef union _hw_gpio_ptor +{ + uint32_t U; + struct _hw_gpio_ptor_bitfields + { + uint32_t PTTO : 32; /*!< [31:0] Port Toggle Output */ + } B; +} hw_gpio_ptor_t; + +/*! + * @name Constants and macros for entire GPIO_PTOR register + */ +/*@{*/ +#define HW_GPIO_PTOR_ADDR(x) ((x) + 0xCU) + +#define HW_GPIO_PTOR(x) (*(__O hw_gpio_ptor_t *) HW_GPIO_PTOR_ADDR(x)) +#define HW_GPIO_PTOR_RD(x) (HW_GPIO_PTOR(x).U) +#define HW_GPIO_PTOR_WR(x, v) (HW_GPIO_PTOR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PTOR bitfields + */ + +/*! + * @name Register GPIO_PTOR, field PTTO[31:0] (WORZ) + * + * Writing to this register will update the contents of the corresponding bit in + * the PDOR as follows: + * + * Values: + * - 0 - Corresponding bit in PDORn does not change. + * - 1 - Corresponding bit in PDORn is set to the inverse of its existing logic + * state. + */ +/*@{*/ +#define BP_GPIO_PTOR_PTTO (0U) /*!< Bit position for GPIO_PTOR_PTTO. */ +#define BM_GPIO_PTOR_PTTO (0xFFFFFFFFU) /*!< Bit mask for GPIO_PTOR_PTTO. */ +#define BS_GPIO_PTOR_PTTO (32U) /*!< Bit field size in bits for GPIO_PTOR_PTTO. */ + +/*! @brief Format value for bitfield GPIO_PTOR_PTTO. */ +#define BF_GPIO_PTOR_PTTO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PTOR_PTTO) & BM_GPIO_PTOR_PTTO) + +/*! @brief Set the PTTO field to a new value. */ +#define BW_GPIO_PTOR_PTTO(x, v) (HW_GPIO_PTOR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_GPIO_PDIR - Port Data Input Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PDIR - Port Data Input Register (RO) + * + * Reset value: 0x00000000U + * + * Do not modify pin configuration registers associated with pins not available + * in your selected package. All unbonded pins not available in your package will + * default to DISABLE state for lowest power consumption. + */ +typedef union _hw_gpio_pdir +{ + uint32_t U; + struct _hw_gpio_pdir_bitfields + { + uint32_t PDI : 32; /*!< [31:0] Port Data Input */ + } B; +} hw_gpio_pdir_t; + +/*! + * @name Constants and macros for entire GPIO_PDIR register + */ +/*@{*/ +#define HW_GPIO_PDIR_ADDR(x) ((x) + 0x10U) + +#define HW_GPIO_PDIR(x) (*(__I hw_gpio_pdir_t *) HW_GPIO_PDIR_ADDR(x)) +#define HW_GPIO_PDIR_RD(x) (HW_GPIO_PDIR(x).U) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PDIR bitfields + */ + +/*! + * @name Register GPIO_PDIR, field PDI[31:0] (RO) + * + * Reads 0 at the unimplemented pins for a particular device. Pins that are not + * configured for a digital function read 0. If the Port Control and Interrupt + * module is disabled, then the corresponding bit in PDIR does not update. + * + * Values: + * - 0 - Pin logic level is logic 0, or is not configured for use by digital + * function. + * - 1 - Pin logic level is logic 1. + */ +/*@{*/ +#define BP_GPIO_PDIR_PDI (0U) /*!< Bit position for GPIO_PDIR_PDI. */ +#define BM_GPIO_PDIR_PDI (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDIR_PDI. */ +#define BS_GPIO_PDIR_PDI (32U) /*!< Bit field size in bits for GPIO_PDIR_PDI. */ + +/*! @brief Read current value of the GPIO_PDIR_PDI field. */ +#define BR_GPIO_PDIR_PDI(x) (HW_GPIO_PDIR(x).U) +/*@}*/ + +/******************************************************************************* + * HW_GPIO_PDDR - Port Data Direction Register + ******************************************************************************/ + +/*! + * @brief HW_GPIO_PDDR - Port Data Direction Register (RW) + * + * Reset value: 0x00000000U + * + * The PDDR configures the individual port pins for input or output. + */ +typedef union _hw_gpio_pddr +{ + uint32_t U; + struct _hw_gpio_pddr_bitfields + { + uint32_t PDD : 32; /*!< [31:0] Port Data Direction */ + } B; +} hw_gpio_pddr_t; + +/*! + * @name Constants and macros for entire GPIO_PDDR register + */ +/*@{*/ +#define HW_GPIO_PDDR_ADDR(x) ((x) + 0x14U) + +#define HW_GPIO_PDDR(x) (*(__IO hw_gpio_pddr_t *) HW_GPIO_PDDR_ADDR(x)) +#define HW_GPIO_PDDR_RD(x) (HW_GPIO_PDDR(x).U) +#define HW_GPIO_PDDR_WR(x, v) (HW_GPIO_PDDR(x).U = (v)) +#define HW_GPIO_PDDR_SET(x, v) (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) | (v))) +#define HW_GPIO_PDDR_CLR(x, v) (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) & ~(v))) +#define HW_GPIO_PDDR_TOG(x, v) (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual GPIO_PDDR bitfields + */ + +/*! + * @name Register GPIO_PDDR, field PDD[31:0] (RW) + * + * Configures individual port pins for input or output. + * + * Values: + * - 0 - Pin is configured as general-purpose input, for the GPIO function. + * - 1 - Pin is configured as general-purpose output, for the GPIO function. + */ +/*@{*/ +#define BP_GPIO_PDDR_PDD (0U) /*!< Bit position for GPIO_PDDR_PDD. */ +#define BM_GPIO_PDDR_PDD (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDDR_PDD. */ +#define BS_GPIO_PDDR_PDD (32U) /*!< Bit field size in bits for GPIO_PDDR_PDD. */ + +/*! @brief Read current value of the GPIO_PDDR_PDD field. */ +#define BR_GPIO_PDDR_PDD(x) (HW_GPIO_PDDR(x).U) + +/*! @brief Format value for bitfield GPIO_PDDR_PDD. */ +#define BF_GPIO_PDDR_PDD(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PDDR_PDD) & BM_GPIO_PDDR_PDD) + +/*! @brief Set the PDD field to a new value. */ +#define BW_GPIO_PDDR_PDD(x, v) (HW_GPIO_PDDR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * hw_gpio_t - module struct + ******************************************************************************/ +/*! + * @brief All GPIO module registers. + */ +#pragma pack(1) +typedef struct _hw_gpio +{ + __IO hw_gpio_pdor_t PDOR; /*!< [0x0] Port Data Output Register */ + __O hw_gpio_psor_t PSOR; /*!< [0x4] Port Set Output Register */ + __O hw_gpio_pcor_t PCOR; /*!< [0x8] Port Clear Output Register */ + __O hw_gpio_ptor_t PTOR; /*!< [0xC] Port Toggle Output Register */ + __I hw_gpio_pdir_t PDIR; /*!< [0x10] Port Data Input Register */ + __IO hw_gpio_pddr_t PDDR; /*!< [0x14] Port Data Direction Register */ +} hw_gpio_t; +#pragma pack() + +/*! @brief Macro to access all GPIO registers. */ +/*! @param x GPIO module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_GPIO(GPIOA_BASE)</code>. */ +#define HW_GPIO(x) (*(hw_gpio_t *)(x)) + +#endif /* __HW_GPIO_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2c.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2c.h new file mode 100644 index 0000000000..70868704ce --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2c.h @@ -0,0 +1,1724 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_I2C_REGISTERS_H__ +#define __HW_I2C_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 I2C + * + * Inter-Integrated Circuit + * + * Registers defined in this header file: + * - HW_I2C_A1 - I2C Address Register 1 + * - HW_I2C_F - I2C Frequency Divider register + * - HW_I2C_C1 - I2C Control Register 1 + * - HW_I2C_S - I2C Status register + * - HW_I2C_D - I2C Data I/O register + * - HW_I2C_C2 - I2C Control Register 2 + * - HW_I2C_FLT - I2C Programmable Input Glitch Filter register + * - HW_I2C_RA - I2C Range Address register + * - HW_I2C_SMB - I2C SMBus Control and Status register + * - HW_I2C_A2 - I2C Address Register 2 + * - HW_I2C_SLTH - I2C SCL Low Timeout Register High + * - HW_I2C_SLTL - I2C SCL Low Timeout Register Low + * + * - hw_i2c_t - Struct containing all module registers. + */ + +#define HW_I2C_INSTANCE_COUNT (2U) /*!< Number of instances of the I2C module. */ +#define HW_I2C0 (0U) /*!< Instance number for I2C0. */ +#define HW_I2C1 (1U) /*!< Instance number for I2C1. */ + +/******************************************************************************* + * HW_I2C_A1 - I2C Address Register 1 + ******************************************************************************/ + +/*! + * @brief HW_I2C_A1 - I2C Address Register 1 (RW) + * + * Reset value: 0x00U + * + * This register contains the slave address to be used by the I2C module. + */ +typedef union _hw_i2c_a1 +{ + uint8_t U; + struct _hw_i2c_a1_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t AD : 7; /*!< [7:1] Address */ + } B; +} hw_i2c_a1_t; + +/*! + * @name Constants and macros for entire I2C_A1 register + */ +/*@{*/ +#define HW_I2C_A1_ADDR(x) ((x) + 0x0U) + +#define HW_I2C_A1(x) (*(__IO hw_i2c_a1_t *) HW_I2C_A1_ADDR(x)) +#define HW_I2C_A1_RD(x) (HW_I2C_A1(x).U) +#define HW_I2C_A1_WR(x, v) (HW_I2C_A1(x).U = (v)) +#define HW_I2C_A1_SET(x, v) (HW_I2C_A1_WR(x, HW_I2C_A1_RD(x) | (v))) +#define HW_I2C_A1_CLR(x, v) (HW_I2C_A1_WR(x, HW_I2C_A1_RD(x) & ~(v))) +#define HW_I2C_A1_TOG(x, v) (HW_I2C_A1_WR(x, HW_I2C_A1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_A1 bitfields + */ + +/*! + * @name Register I2C_A1, field AD[7:1] (RW) + * + * Contains the primary slave address used by the I2C module when it is + * addressed as a slave. This field is used in the 7-bit address scheme and the lower + * seven bits in the 10-bit address scheme. + */ +/*@{*/ +#define BP_I2C_A1_AD (1U) /*!< Bit position for I2C_A1_AD. */ +#define BM_I2C_A1_AD (0xFEU) /*!< Bit mask for I2C_A1_AD. */ +#define BS_I2C_A1_AD (7U) /*!< Bit field size in bits for I2C_A1_AD. */ + +/*! @brief Read current value of the I2C_A1_AD field. */ +#define BR_I2C_A1_AD(x) (HW_I2C_A1(x).B.AD) + +/*! @brief Format value for bitfield I2C_A1_AD. */ +#define BF_I2C_A1_AD(v) ((uint8_t)((uint8_t)(v) << BP_I2C_A1_AD) & BM_I2C_A1_AD) + +/*! @brief Set the AD field to a new value. */ +#define BW_I2C_A1_AD(x, v) (HW_I2C_A1_WR(x, (HW_I2C_A1_RD(x) & ~BM_I2C_A1_AD) | BF_I2C_A1_AD(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2C_F - I2C Frequency Divider register + ******************************************************************************/ + +/*! + * @brief HW_I2C_F - I2C Frequency Divider register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_f +{ + uint8_t U; + struct _hw_i2c_f_bitfields + { + uint8_t ICR : 6; /*!< [5:0] ClockRate */ + uint8_t MULT : 2; /*!< [7:6] Multiplier Factor */ + } B; +} hw_i2c_f_t; + +/*! + * @name Constants and macros for entire I2C_F register + */ +/*@{*/ +#define HW_I2C_F_ADDR(x) ((x) + 0x1U) + +#define HW_I2C_F(x) (*(__IO hw_i2c_f_t *) HW_I2C_F_ADDR(x)) +#define HW_I2C_F_RD(x) (HW_I2C_F(x).U) +#define HW_I2C_F_WR(x, v) (HW_I2C_F(x).U = (v)) +#define HW_I2C_F_SET(x, v) (HW_I2C_F_WR(x, HW_I2C_F_RD(x) | (v))) +#define HW_I2C_F_CLR(x, v) (HW_I2C_F_WR(x, HW_I2C_F_RD(x) & ~(v))) +#define HW_I2C_F_TOG(x, v) (HW_I2C_F_WR(x, HW_I2C_F_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_F bitfields + */ + +/*! + * @name Register I2C_F, field ICR[5:0] (RW) + * + * Prescales the I2C module clock for bit rate selection. This field and the + * MULT field determine the I2C baud rate, the SDA hold time, the SCL start hold + * time, and the SCL stop hold time. For a list of values corresponding to each ICR + * setting, see I2C divider and hold values. The SCL divider multiplied by + * multiplier factor (mul) determines the I2C baud rate. I2C baud rate = I2C module + * clock speed (Hz)/(mul * SCL divider) The SDA hold time is the delay from the + * falling edge of SCL (I2C clock) to the changing of SDA (I2C data). SDA hold time = + * I2C module clock period (s) * mul * SDA hold value The SCL start hold time is + * the delay from the falling edge of SDA (I2C data) while SCL is high (start + * condition) to the falling edge of SCL (I2C clock). SCL start hold time = I2C + * module clock period (s) * mul * SCL start hold value The SCL stop hold time is + * the delay from the rising edge of SCL (I2C clock) to the rising edge of SDA (I2C + * data) while SCL is high (stop condition). SCL stop hold time = I2C module + * clock period (s) * mul * SCL stop hold value For example, if the I2C module clock + * speed is 8 MHz, the following table shows the possible hold time values with + * different ICR and MULT selections to achieve an I2C baud rate of 100 kbit/s. + * MULT ICR Hold times (us) SDA SCL Start SCL Stop 2h 00h 3.500 3.000 5.500 1h 07h + * 2.500 4.000 5.250 1h 0Bh 2.250 4.000 5.250 0h 14h 2.125 4.250 5.125 0h 18h + * 1.125 4.750 5.125 + */ +/*@{*/ +#define BP_I2C_F_ICR (0U) /*!< Bit position for I2C_F_ICR. */ +#define BM_I2C_F_ICR (0x3FU) /*!< Bit mask for I2C_F_ICR. */ +#define BS_I2C_F_ICR (6U) /*!< Bit field size in bits for I2C_F_ICR. */ + +/*! @brief Read current value of the I2C_F_ICR field. */ +#define BR_I2C_F_ICR(x) (HW_I2C_F(x).B.ICR) + +/*! @brief Format value for bitfield I2C_F_ICR. */ +#define BF_I2C_F_ICR(v) ((uint8_t)((uint8_t)(v) << BP_I2C_F_ICR) & BM_I2C_F_ICR) + +/*! @brief Set the ICR field to a new value. */ +#define BW_I2C_F_ICR(x, v) (HW_I2C_F_WR(x, (HW_I2C_F_RD(x) & ~BM_I2C_F_ICR) | BF_I2C_F_ICR(v))) +/*@}*/ + +/*! + * @name Register I2C_F, field MULT[7:6] (RW) + * + * Defines the multiplier factor (mul). This factor is used along with the SCL + * divider to generate the I2C baud rate. + * + * Values: + * - 00 - mul = 1 + * - 01 - mul = 2 + * - 10 - mul = 4 + * - 11 - Reserved + */ +/*@{*/ +#define BP_I2C_F_MULT (6U) /*!< Bit position for I2C_F_MULT. */ +#define BM_I2C_F_MULT (0xC0U) /*!< Bit mask for I2C_F_MULT. */ +#define BS_I2C_F_MULT (2U) /*!< Bit field size in bits for I2C_F_MULT. */ + +/*! @brief Read current value of the I2C_F_MULT field. */ +#define BR_I2C_F_MULT(x) (HW_I2C_F(x).B.MULT) + +/*! @brief Format value for bitfield I2C_F_MULT. */ +#define BF_I2C_F_MULT(v) ((uint8_t)((uint8_t)(v) << BP_I2C_F_MULT) & BM_I2C_F_MULT) + +/*! @brief Set the MULT field to a new value. */ +#define BW_I2C_F_MULT(x, v) (HW_I2C_F_WR(x, (HW_I2C_F_RD(x) & ~BM_I2C_F_MULT) | BF_I2C_F_MULT(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2C_C1 - I2C Control Register 1 + ******************************************************************************/ + +/*! + * @brief HW_I2C_C1 - I2C Control Register 1 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_c1 +{ + uint8_t U; + struct _hw_i2c_c1_bitfields + { + uint8_t DMAEN : 1; /*!< [0] DMA Enable */ + uint8_t WUEN : 1; /*!< [1] Wakeup Enable */ + uint8_t RSTA : 1; /*!< [2] Repeat START */ + uint8_t TXAK : 1; /*!< [3] Transmit Acknowledge Enable */ + uint8_t TX : 1; /*!< [4] Transmit Mode Select */ + uint8_t MST : 1; /*!< [5] Master Mode Select */ + uint8_t IICIE : 1; /*!< [6] I2C Interrupt Enable */ + uint8_t IICEN : 1; /*!< [7] I2C Enable */ + } B; +} hw_i2c_c1_t; + +/*! + * @name Constants and macros for entire I2C_C1 register + */ +/*@{*/ +#define HW_I2C_C1_ADDR(x) ((x) + 0x2U) + +#define HW_I2C_C1(x) (*(__IO hw_i2c_c1_t *) HW_I2C_C1_ADDR(x)) +#define HW_I2C_C1_RD(x) (HW_I2C_C1(x).U) +#define HW_I2C_C1_WR(x, v) (HW_I2C_C1(x).U = (v)) +#define HW_I2C_C1_SET(x, v) (HW_I2C_C1_WR(x, HW_I2C_C1_RD(x) | (v))) +#define HW_I2C_C1_CLR(x, v) (HW_I2C_C1_WR(x, HW_I2C_C1_RD(x) & ~(v))) +#define HW_I2C_C1_TOG(x, v) (HW_I2C_C1_WR(x, HW_I2C_C1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_C1 bitfields + */ + +/*! + * @name Register I2C_C1, field DMAEN[0] (RW) + * + * Enables or disables the DMA function. + * + * Values: + * - 0 - All DMA signalling disabled. + * - 1 - DMA transfer is enabled. While SMB[FACK] = 0, the following conditions + * trigger the DMA request: a data byte is received, and either address or + * data is transmitted. (ACK/NACK is automatic) the first byte received matches + * the A1 register or is a general call address. If any address matching + * occurs, S[IAAS] and S[TCF] are set. If the direction of transfer is known + * from master to slave, then it is not required to check S[SRW]. With this + * assumption, DMA can also be used in this case. In other cases, if the master + * reads data from the slave, then it is required to rewrite the C1 register + * operation. With this assumption, DMA cannot be used. When FACK = 1, an + * address or a data byte is transmitted. + */ +/*@{*/ +#define BP_I2C_C1_DMAEN (0U) /*!< Bit position for I2C_C1_DMAEN. */ +#define BM_I2C_C1_DMAEN (0x01U) /*!< Bit mask for I2C_C1_DMAEN. */ +#define BS_I2C_C1_DMAEN (1U) /*!< Bit field size in bits for I2C_C1_DMAEN. */ + +/*! @brief Read current value of the I2C_C1_DMAEN field. */ +#define BR_I2C_C1_DMAEN(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_DMAEN)) + +/*! @brief Format value for bitfield I2C_C1_DMAEN. */ +#define BF_I2C_C1_DMAEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_DMAEN) & BM_I2C_C1_DMAEN) + +/*! @brief Set the DMAEN field to a new value. */ +#define BW_I2C_C1_DMAEN(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_DMAEN) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field WUEN[1] (RW) + * + * The I2C module can wake the MCU from low power mode with no peripheral bus + * running when slave address matching occurs. + * + * Values: + * - 0 - Normal operation. No interrupt generated when address matching in low + * power mode. + * - 1 - Enables the wakeup function in low power mode. + */ +/*@{*/ +#define BP_I2C_C1_WUEN (1U) /*!< Bit position for I2C_C1_WUEN. */ +#define BM_I2C_C1_WUEN (0x02U) /*!< Bit mask for I2C_C1_WUEN. */ +#define BS_I2C_C1_WUEN (1U) /*!< Bit field size in bits for I2C_C1_WUEN. */ + +/*! @brief Read current value of the I2C_C1_WUEN field. */ +#define BR_I2C_C1_WUEN(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_WUEN)) + +/*! @brief Format value for bitfield I2C_C1_WUEN. */ +#define BF_I2C_C1_WUEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_WUEN) & BM_I2C_C1_WUEN) + +/*! @brief Set the WUEN field to a new value. */ +#define BW_I2C_C1_WUEN(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_WUEN) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field RSTA[2] (WORZ) + * + * Writing 1 to this bit generates a repeated START condition provided it is the + * current master. This bit will always be read as 0. Attempting a repeat at the + * wrong time results in loss of arbitration. + */ +/*@{*/ +#define BP_I2C_C1_RSTA (2U) /*!< Bit position for I2C_C1_RSTA. */ +#define BM_I2C_C1_RSTA (0x04U) /*!< Bit mask for I2C_C1_RSTA. */ +#define BS_I2C_C1_RSTA (1U) /*!< Bit field size in bits for I2C_C1_RSTA. */ + +/*! @brief Format value for bitfield I2C_C1_RSTA. */ +#define BF_I2C_C1_RSTA(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_RSTA) & BM_I2C_C1_RSTA) + +/*! @brief Set the RSTA field to a new value. */ +#define BW_I2C_C1_RSTA(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_RSTA) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field TXAK[3] (RW) + * + * Specifies the value driven onto the SDA during data acknowledge cycles for + * both master and slave receivers. The value of SMB[FACK] affects NACK/ACK + * generation. SCL is held low until TXAK is written. + * + * Values: + * - 0 - An acknowledge signal is sent to the bus on the following receiving + * byte (if FACK is cleared) or the current receiving byte (if FACK is set). + * - 1 - No acknowledge signal is sent to the bus on the following receiving + * data byte (if FACK is cleared) or the current receiving data byte (if FACK is + * set). + */ +/*@{*/ +#define BP_I2C_C1_TXAK (3U) /*!< Bit position for I2C_C1_TXAK. */ +#define BM_I2C_C1_TXAK (0x08U) /*!< Bit mask for I2C_C1_TXAK. */ +#define BS_I2C_C1_TXAK (1U) /*!< Bit field size in bits for I2C_C1_TXAK. */ + +/*! @brief Read current value of the I2C_C1_TXAK field. */ +#define BR_I2C_C1_TXAK(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_TXAK)) + +/*! @brief Format value for bitfield I2C_C1_TXAK. */ +#define BF_I2C_C1_TXAK(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_TXAK) & BM_I2C_C1_TXAK) + +/*! @brief Set the TXAK field to a new value. */ +#define BW_I2C_C1_TXAK(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_TXAK) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field TX[4] (RW) + * + * Selects the direction of master and slave transfers. In master mode this bit + * must be set according to the type of transfer required. Therefore, for address + * cycles, this bit is always set. When addressed as a slave this bit must be + * set by software according to the SRW bit in the status register. + * + * Values: + * - 0 - Receive + * - 1 - Transmit + */ +/*@{*/ +#define BP_I2C_C1_TX (4U) /*!< Bit position for I2C_C1_TX. */ +#define BM_I2C_C1_TX (0x10U) /*!< Bit mask for I2C_C1_TX. */ +#define BS_I2C_C1_TX (1U) /*!< Bit field size in bits for I2C_C1_TX. */ + +/*! @brief Read current value of the I2C_C1_TX field. */ +#define BR_I2C_C1_TX(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_TX)) + +/*! @brief Format value for bitfield I2C_C1_TX. */ +#define BF_I2C_C1_TX(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_TX) & BM_I2C_C1_TX) + +/*! @brief Set the TX field to a new value. */ +#define BW_I2C_C1_TX(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_TX) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field MST[5] (RW) + * + * When MST is changed from 0 to 1, a START signal is generated on the bus and + * master mode is selected. When this bit changes from 1 to 0, a STOP signal is + * generated and the mode of operation changes from master to slave. + * + * Values: + * - 0 - Slave mode + * - 1 - Master mode + */ +/*@{*/ +#define BP_I2C_C1_MST (5U) /*!< Bit position for I2C_C1_MST. */ +#define BM_I2C_C1_MST (0x20U) /*!< Bit mask for I2C_C1_MST. */ +#define BS_I2C_C1_MST (1U) /*!< Bit field size in bits for I2C_C1_MST. */ + +/*! @brief Read current value of the I2C_C1_MST field. */ +#define BR_I2C_C1_MST(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_MST)) + +/*! @brief Format value for bitfield I2C_C1_MST. */ +#define BF_I2C_C1_MST(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_MST) & BM_I2C_C1_MST) + +/*! @brief Set the MST field to a new value. */ +#define BW_I2C_C1_MST(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_MST) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field IICIE[6] (RW) + * + * Enables I2C interrupt requests. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_I2C_C1_IICIE (6U) /*!< Bit position for I2C_C1_IICIE. */ +#define BM_I2C_C1_IICIE (0x40U) /*!< Bit mask for I2C_C1_IICIE. */ +#define BS_I2C_C1_IICIE (1U) /*!< Bit field size in bits for I2C_C1_IICIE. */ + +/*! @brief Read current value of the I2C_C1_IICIE field. */ +#define BR_I2C_C1_IICIE(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_IICIE)) + +/*! @brief Format value for bitfield I2C_C1_IICIE. */ +#define BF_I2C_C1_IICIE(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_IICIE) & BM_I2C_C1_IICIE) + +/*! @brief Set the IICIE field to a new value. */ +#define BW_I2C_C1_IICIE(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_IICIE) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C1, field IICEN[7] (RW) + * + * Enables I2C module operation. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_I2C_C1_IICEN (7U) /*!< Bit position for I2C_C1_IICEN. */ +#define BM_I2C_C1_IICEN (0x80U) /*!< Bit mask for I2C_C1_IICEN. */ +#define BS_I2C_C1_IICEN (1U) /*!< Bit field size in bits for I2C_C1_IICEN. */ + +/*! @brief Read current value of the I2C_C1_IICEN field. */ +#define BR_I2C_C1_IICEN(x) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_IICEN)) + +/*! @brief Format value for bitfield I2C_C1_IICEN. */ +#define BF_I2C_C1_IICEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C1_IICEN) & BM_I2C_C1_IICEN) + +/*! @brief Set the IICEN field to a new value. */ +#define BW_I2C_C1_IICEN(x, v) (BITBAND_ACCESS8(HW_I2C_C1_ADDR(x), BP_I2C_C1_IICEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_S - I2C Status register + ******************************************************************************/ + +/*! + * @brief HW_I2C_S - I2C Status register (RW) + * + * Reset value: 0x80U + */ +typedef union _hw_i2c_s +{ + uint8_t U; + struct _hw_i2c_s_bitfields + { + uint8_t RXAK : 1; /*!< [0] Receive Acknowledge */ + uint8_t IICIF : 1; /*!< [1] Interrupt Flag */ + uint8_t SRW : 1; /*!< [2] Slave Read/Write */ + uint8_t RAM : 1; /*!< [3] Range Address Match */ + uint8_t ARBL : 1; /*!< [4] Arbitration Lost */ + uint8_t BUSY : 1; /*!< [5] Bus Busy */ + uint8_t IAAS : 1; /*!< [6] Addressed As A Slave */ + uint8_t TCF : 1; /*!< [7] Transfer Complete Flag */ + } B; +} hw_i2c_s_t; + +/*! + * @name Constants and macros for entire I2C_S register + */ +/*@{*/ +#define HW_I2C_S_ADDR(x) ((x) + 0x3U) + +#define HW_I2C_S(x) (*(__IO hw_i2c_s_t *) HW_I2C_S_ADDR(x)) +#define HW_I2C_S_RD(x) (HW_I2C_S(x).U) +#define HW_I2C_S_WR(x, v) (HW_I2C_S(x).U = (v)) +#define HW_I2C_S_SET(x, v) (HW_I2C_S_WR(x, HW_I2C_S_RD(x) | (v))) +#define HW_I2C_S_CLR(x, v) (HW_I2C_S_WR(x, HW_I2C_S_RD(x) & ~(v))) +#define HW_I2C_S_TOG(x, v) (HW_I2C_S_WR(x, HW_I2C_S_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_S bitfields + */ + +/*! + * @name Register I2C_S, field RXAK[0] (RO) + * + * Values: + * - 0 - Acknowledge signal was received after the completion of one byte of + * data transmission on the bus + * - 1 - No acknowledge signal detected + */ +/*@{*/ +#define BP_I2C_S_RXAK (0U) /*!< Bit position for I2C_S_RXAK. */ +#define BM_I2C_S_RXAK (0x01U) /*!< Bit mask for I2C_S_RXAK. */ +#define BS_I2C_S_RXAK (1U) /*!< Bit field size in bits for I2C_S_RXAK. */ + +/*! @brief Read current value of the I2C_S_RXAK field. */ +#define BR_I2C_S_RXAK(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_RXAK)) +/*@}*/ + +/*! + * @name Register I2C_S, field IICIF[1] (W1C) + * + * This bit sets when an interrupt is pending. This bit must be cleared by + * software by writing 1 to it, such as in the interrupt routine. One of the following + * events can set this bit: One byte transfer, including ACK/NACK bit, completes + * if FACK is 0. An ACK or NACK is sent on the bus by writing 0 or 1 to TXAK + * after this bit is set in receive mode. One byte transfer, excluding ACK/NACK bit, + * completes if FACK is 1. Match of slave address to calling address including + * primary slave address, range slave address , alert response address, second + * slave address, or general call address. Arbitration lost In SMBus mode, any + * timeouts except SCL and SDA high timeouts I2C bus stop or start detection if the + * SSIE bit in the Input Glitch Filter register is 1 To clear the I2C bus stop or + * start detection interrupt: In the interrupt service routine, first clear the + * STOPF or STARTF bit in the Input Glitch Filter register by writing 1 to it, and + * then clear the IICIF bit. If this sequence is reversed, the IICIF bit is + * asserted again. + * + * Values: + * - 0 - No interrupt pending + * - 1 - Interrupt pending + */ +/*@{*/ +#define BP_I2C_S_IICIF (1U) /*!< Bit position for I2C_S_IICIF. */ +#define BM_I2C_S_IICIF (0x02U) /*!< Bit mask for I2C_S_IICIF. */ +#define BS_I2C_S_IICIF (1U) /*!< Bit field size in bits for I2C_S_IICIF. */ + +/*! @brief Read current value of the I2C_S_IICIF field. */ +#define BR_I2C_S_IICIF(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_IICIF)) + +/*! @brief Format value for bitfield I2C_S_IICIF. */ +#define BF_I2C_S_IICIF(v) ((uint8_t)((uint8_t)(v) << BP_I2C_S_IICIF) & BM_I2C_S_IICIF) + +/*! @brief Set the IICIF field to a new value. */ +#define BW_I2C_S_IICIF(x, v) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_IICIF) = (v)) +/*@}*/ + +/*! + * @name Register I2C_S, field SRW[2] (RO) + * + * When addressed as a slave, SRW indicates the value of the R/W command bit of + * the calling address sent to the master. + * + * Values: + * - 0 - Slave receive, master writing to slave + * - 1 - Slave transmit, master reading from slave + */ +/*@{*/ +#define BP_I2C_S_SRW (2U) /*!< Bit position for I2C_S_SRW. */ +#define BM_I2C_S_SRW (0x04U) /*!< Bit mask for I2C_S_SRW. */ +#define BS_I2C_S_SRW (1U) /*!< Bit field size in bits for I2C_S_SRW. */ + +/*! @brief Read current value of the I2C_S_SRW field. */ +#define BR_I2C_S_SRW(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_SRW)) +/*@}*/ + +/*! + * @name Register I2C_S, field RAM[3] (RW) + * + * This bit is set to 1 by any of the following conditions, if I2C_C2[RMEN] = 1: + * Any nonzero calling address is received that matches the address in the RA + * register. The calling address is within the range of values of the A1 and RA + * registers. For the RAM bit to be set to 1 correctly, C1[IICIE] must be set to 1. + * Writing the C1 register with any value clears this bit to 0. + * + * Values: + * - 0 - Not addressed + * - 1 - Addressed as a slave + */ +/*@{*/ +#define BP_I2C_S_RAM (3U) /*!< Bit position for I2C_S_RAM. */ +#define BM_I2C_S_RAM (0x08U) /*!< Bit mask for I2C_S_RAM. */ +#define BS_I2C_S_RAM (1U) /*!< Bit field size in bits for I2C_S_RAM. */ + +/*! @brief Read current value of the I2C_S_RAM field. */ +#define BR_I2C_S_RAM(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_RAM)) + +/*! @brief Format value for bitfield I2C_S_RAM. */ +#define BF_I2C_S_RAM(v) ((uint8_t)((uint8_t)(v) << BP_I2C_S_RAM) & BM_I2C_S_RAM) + +/*! @brief Set the RAM field to a new value. */ +#define BW_I2C_S_RAM(x, v) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_RAM) = (v)) +/*@}*/ + +/*! + * @name Register I2C_S, field ARBL[4] (W1C) + * + * This bit is set by hardware when the arbitration procedure is lost. The ARBL + * bit must be cleared by software, by writing 1 to it. + * + * Values: + * - 0 - Standard bus operation. + * - 1 - Loss of arbitration. + */ +/*@{*/ +#define BP_I2C_S_ARBL (4U) /*!< Bit position for I2C_S_ARBL. */ +#define BM_I2C_S_ARBL (0x10U) /*!< Bit mask for I2C_S_ARBL. */ +#define BS_I2C_S_ARBL (1U) /*!< Bit field size in bits for I2C_S_ARBL. */ + +/*! @brief Read current value of the I2C_S_ARBL field. */ +#define BR_I2C_S_ARBL(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_ARBL)) + +/*! @brief Format value for bitfield I2C_S_ARBL. */ +#define BF_I2C_S_ARBL(v) ((uint8_t)((uint8_t)(v) << BP_I2C_S_ARBL) & BM_I2C_S_ARBL) + +/*! @brief Set the ARBL field to a new value. */ +#define BW_I2C_S_ARBL(x, v) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_ARBL) = (v)) +/*@}*/ + +/*! + * @name Register I2C_S, field BUSY[5] (RO) + * + * Indicates the status of the bus regardless of slave or master mode. This bit + * is set when a START signal is detected and cleared when a STOP signal is + * detected. + * + * Values: + * - 0 - Bus is idle + * - 1 - Bus is busy + */ +/*@{*/ +#define BP_I2C_S_BUSY (5U) /*!< Bit position for I2C_S_BUSY. */ +#define BM_I2C_S_BUSY (0x20U) /*!< Bit mask for I2C_S_BUSY. */ +#define BS_I2C_S_BUSY (1U) /*!< Bit field size in bits for I2C_S_BUSY. */ + +/*! @brief Read current value of the I2C_S_BUSY field. */ +#define BR_I2C_S_BUSY(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_BUSY)) +/*@}*/ + +/*! + * @name Register I2C_S, field IAAS[6] (RW) + * + * This bit is set by one of the following conditions: The calling address + * matches the programmed primary slave address in the A1 register, or matches the + * range address in the RA register (which must be set to a nonzero value and under + * the condition I2C_C2[RMEN] = 1). C2[GCAEN] is set and a general call is + * received. SMB[SIICAEN] is set and the calling address matches the second programmed + * slave address. ALERTEN is set and an SMBus alert response address is received + * RMEN is set and an address is received that is within the range between the + * values of the A1 and RA registers. IAAS sets before the ACK bit. The CPU must + * check the SRW bit and set TX/RX accordingly. Writing the C1 register with any + * value clears this bit. + * + * Values: + * - 0 - Not addressed + * - 1 - Addressed as a slave + */ +/*@{*/ +#define BP_I2C_S_IAAS (6U) /*!< Bit position for I2C_S_IAAS. */ +#define BM_I2C_S_IAAS (0x40U) /*!< Bit mask for I2C_S_IAAS. */ +#define BS_I2C_S_IAAS (1U) /*!< Bit field size in bits for I2C_S_IAAS. */ + +/*! @brief Read current value of the I2C_S_IAAS field. */ +#define BR_I2C_S_IAAS(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_IAAS)) + +/*! @brief Format value for bitfield I2C_S_IAAS. */ +#define BF_I2C_S_IAAS(v) ((uint8_t)((uint8_t)(v) << BP_I2C_S_IAAS) & BM_I2C_S_IAAS) + +/*! @brief Set the IAAS field to a new value. */ +#define BW_I2C_S_IAAS(x, v) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_IAAS) = (v)) +/*@}*/ + +/*! + * @name Register I2C_S, field TCF[7] (RO) + * + * Acknowledges a byte transfer; TCF sets on the completion of a byte transfer. + * This bit is valid only during or immediately following a transfer to or from + * the I2C module. TCF is cleared by reading the I2C data register in receive mode + * or by writing to the I2C data register in transmit mode. + * + * Values: + * - 0 - Transfer in progress + * - 1 - Transfer complete + */ +/*@{*/ +#define BP_I2C_S_TCF (7U) /*!< Bit position for I2C_S_TCF. */ +#define BM_I2C_S_TCF (0x80U) /*!< Bit mask for I2C_S_TCF. */ +#define BS_I2C_S_TCF (1U) /*!< Bit field size in bits for I2C_S_TCF. */ + +/*! @brief Read current value of the I2C_S_TCF field. */ +#define BR_I2C_S_TCF(x) (BITBAND_ACCESS8(HW_I2C_S_ADDR(x), BP_I2C_S_TCF)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_D - I2C Data I/O register + ******************************************************************************/ + +/*! + * @brief HW_I2C_D - I2C Data I/O register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_d +{ + uint8_t U; + struct _hw_i2c_d_bitfields + { + uint8_t DATA : 8; /*!< [7:0] Data */ + } B; +} hw_i2c_d_t; + +/*! + * @name Constants and macros for entire I2C_D register + */ +/*@{*/ +#define HW_I2C_D_ADDR(x) ((x) + 0x4U) + +#define HW_I2C_D(x) (*(__IO hw_i2c_d_t *) HW_I2C_D_ADDR(x)) +#define HW_I2C_D_RD(x) (HW_I2C_D(x).U) +#define HW_I2C_D_WR(x, v) (HW_I2C_D(x).U = (v)) +#define HW_I2C_D_SET(x, v) (HW_I2C_D_WR(x, HW_I2C_D_RD(x) | (v))) +#define HW_I2C_D_CLR(x, v) (HW_I2C_D_WR(x, HW_I2C_D_RD(x) & ~(v))) +#define HW_I2C_D_TOG(x, v) (HW_I2C_D_WR(x, HW_I2C_D_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_D bitfields + */ + +/*! + * @name Register I2C_D, field DATA[7:0] (RW) + * + * In master transmit mode, when data is written to this register, a data + * transfer is initiated. The most significant bit is sent first. In master receive + * mode, reading this register initiates receiving of the next byte of data. When + * making the transition out of master receive mode, switch the I2C mode before + * reading the Data register to prevent an inadvertent initiation of a master + * receive data transfer. In slave mode, the same functions are available after an + * address match occurs. The C1[TX] bit must correctly reflect the desired direction + * of transfer in master and slave modes for the transmission to begin. For + * example, if the I2C module is configured for master transmit but a master receive + * is desired, reading the Data register does not initiate the receive. Reading + * the Data register returns the last byte received while the I2C module is + * configured in master receive or slave receive mode. The Data register does not + * reflect every byte that is transmitted on the I2C bus, and neither can software + * verify that a byte has been written to the Data register correctly by reading it + * back. In master transmit mode, the first byte of data written to the Data + * register following assertion of MST (start bit) or assertion of RSTA (repeated + * start bit) is used for the address transfer and must consist of the calling + * address (in bits 7-1) concatenated with the required R/W bit (in position bit 0). + */ +/*@{*/ +#define BP_I2C_D_DATA (0U) /*!< Bit position for I2C_D_DATA. */ +#define BM_I2C_D_DATA (0xFFU) /*!< Bit mask for I2C_D_DATA. */ +#define BS_I2C_D_DATA (8U) /*!< Bit field size in bits for I2C_D_DATA. */ + +/*! @brief Read current value of the I2C_D_DATA field. */ +#define BR_I2C_D_DATA(x) (HW_I2C_D(x).U) + +/*! @brief Format value for bitfield I2C_D_DATA. */ +#define BF_I2C_D_DATA(v) ((uint8_t)((uint8_t)(v) << BP_I2C_D_DATA) & BM_I2C_D_DATA) + +/*! @brief Set the DATA field to a new value. */ +#define BW_I2C_D_DATA(x, v) (HW_I2C_D_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_C2 - I2C Control Register 2 + ******************************************************************************/ + +/*! + * @brief HW_I2C_C2 - I2C Control Register 2 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_c2 +{ + uint8_t U; + struct _hw_i2c_c2_bitfields + { + uint8_t AD : 3; /*!< [2:0] Slave Address */ + uint8_t RMEN : 1; /*!< [3] Range Address Matching Enable */ + uint8_t SBRC : 1; /*!< [4] Slave Baud Rate Control */ + uint8_t HDRS : 1; /*!< [5] High Drive Select */ + uint8_t ADEXT : 1; /*!< [6] Address Extension */ + uint8_t GCAEN : 1; /*!< [7] General Call Address Enable */ + } B; +} hw_i2c_c2_t; + +/*! + * @name Constants and macros for entire I2C_C2 register + */ +/*@{*/ +#define HW_I2C_C2_ADDR(x) ((x) + 0x5U) + +#define HW_I2C_C2(x) (*(__IO hw_i2c_c2_t *) HW_I2C_C2_ADDR(x)) +#define HW_I2C_C2_RD(x) (HW_I2C_C2(x).U) +#define HW_I2C_C2_WR(x, v) (HW_I2C_C2(x).U = (v)) +#define HW_I2C_C2_SET(x, v) (HW_I2C_C2_WR(x, HW_I2C_C2_RD(x) | (v))) +#define HW_I2C_C2_CLR(x, v) (HW_I2C_C2_WR(x, HW_I2C_C2_RD(x) & ~(v))) +#define HW_I2C_C2_TOG(x, v) (HW_I2C_C2_WR(x, HW_I2C_C2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_C2 bitfields + */ + +/*! + * @name Register I2C_C2, field AD[2:0] (RW) + * + * Contains the upper three bits of the slave address in the 10-bit address + * scheme. This field is valid only while the ADEXT bit is set. + */ +/*@{*/ +#define BP_I2C_C2_AD (0U) /*!< Bit position for I2C_C2_AD. */ +#define BM_I2C_C2_AD (0x07U) /*!< Bit mask for I2C_C2_AD. */ +#define BS_I2C_C2_AD (3U) /*!< Bit field size in bits for I2C_C2_AD. */ + +/*! @brief Read current value of the I2C_C2_AD field. */ +#define BR_I2C_C2_AD(x) (HW_I2C_C2(x).B.AD) + +/*! @brief Format value for bitfield I2C_C2_AD. */ +#define BF_I2C_C2_AD(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_AD) & BM_I2C_C2_AD) + +/*! @brief Set the AD field to a new value. */ +#define BW_I2C_C2_AD(x, v) (HW_I2C_C2_WR(x, (HW_I2C_C2_RD(x) & ~BM_I2C_C2_AD) | BF_I2C_C2_AD(v))) +/*@}*/ + +/*! + * @name Register I2C_C2, field RMEN[3] (RW) + * + * This bit controls the slave address matching for addresses between the values + * of the A1 and RA registers. When this bit is set, a slave address matching + * occurs for any address greater than the value of the A1 register and less than + * or equal to the value of the RA register. + * + * Values: + * - 0 - Range mode disabled. No address matching occurs for an address within + * the range of values of the A1 and RA registers. + * - 1 - Range mode enabled. Address matching occurs when a slave receives an + * address within the range of values of the A1 and RA registers. + */ +/*@{*/ +#define BP_I2C_C2_RMEN (3U) /*!< Bit position for I2C_C2_RMEN. */ +#define BM_I2C_C2_RMEN (0x08U) /*!< Bit mask for I2C_C2_RMEN. */ +#define BS_I2C_C2_RMEN (1U) /*!< Bit field size in bits for I2C_C2_RMEN. */ + +/*! @brief Read current value of the I2C_C2_RMEN field. */ +#define BR_I2C_C2_RMEN(x) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_RMEN)) + +/*! @brief Format value for bitfield I2C_C2_RMEN. */ +#define BF_I2C_C2_RMEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_RMEN) & BM_I2C_C2_RMEN) + +/*! @brief Set the RMEN field to a new value. */ +#define BW_I2C_C2_RMEN(x, v) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_RMEN) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C2, field SBRC[4] (RW) + * + * Enables independent slave mode baud rate at maximum frequency, which forces + * clock stretching on SCL in very fast I2C modes. To a slave, an example of a + * "very fast" mode is when the master transfers at 40 kbit/s but the slave can + * capture the master's data at only 10 kbit/s. + * + * Values: + * - 0 - The slave baud rate follows the master baud rate and clock stretching + * may occur + * - 1 - Slave baud rate is independent of the master baud rate + */ +/*@{*/ +#define BP_I2C_C2_SBRC (4U) /*!< Bit position for I2C_C2_SBRC. */ +#define BM_I2C_C2_SBRC (0x10U) /*!< Bit mask for I2C_C2_SBRC. */ +#define BS_I2C_C2_SBRC (1U) /*!< Bit field size in bits for I2C_C2_SBRC. */ + +/*! @brief Read current value of the I2C_C2_SBRC field. */ +#define BR_I2C_C2_SBRC(x) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_SBRC)) + +/*! @brief Format value for bitfield I2C_C2_SBRC. */ +#define BF_I2C_C2_SBRC(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_SBRC) & BM_I2C_C2_SBRC) + +/*! @brief Set the SBRC field to a new value. */ +#define BW_I2C_C2_SBRC(x, v) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_SBRC) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C2, field HDRS[5] (RW) + * + * Controls the drive capability of the I2C pads. + * + * Values: + * - 0 - Normal drive mode + * - 1 - High drive mode + */ +/*@{*/ +#define BP_I2C_C2_HDRS (5U) /*!< Bit position for I2C_C2_HDRS. */ +#define BM_I2C_C2_HDRS (0x20U) /*!< Bit mask for I2C_C2_HDRS. */ +#define BS_I2C_C2_HDRS (1U) /*!< Bit field size in bits for I2C_C2_HDRS. */ + +/*! @brief Read current value of the I2C_C2_HDRS field. */ +#define BR_I2C_C2_HDRS(x) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_HDRS)) + +/*! @brief Format value for bitfield I2C_C2_HDRS. */ +#define BF_I2C_C2_HDRS(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_HDRS) & BM_I2C_C2_HDRS) + +/*! @brief Set the HDRS field to a new value. */ +#define BW_I2C_C2_HDRS(x, v) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_HDRS) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C2, field ADEXT[6] (RW) + * + * Controls the number of bits used for the slave address. + * + * Values: + * - 0 - 7-bit address scheme + * - 1 - 10-bit address scheme + */ +/*@{*/ +#define BP_I2C_C2_ADEXT (6U) /*!< Bit position for I2C_C2_ADEXT. */ +#define BM_I2C_C2_ADEXT (0x40U) /*!< Bit mask for I2C_C2_ADEXT. */ +#define BS_I2C_C2_ADEXT (1U) /*!< Bit field size in bits for I2C_C2_ADEXT. */ + +/*! @brief Read current value of the I2C_C2_ADEXT field. */ +#define BR_I2C_C2_ADEXT(x) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_ADEXT)) + +/*! @brief Format value for bitfield I2C_C2_ADEXT. */ +#define BF_I2C_C2_ADEXT(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_ADEXT) & BM_I2C_C2_ADEXT) + +/*! @brief Set the ADEXT field to a new value. */ +#define BW_I2C_C2_ADEXT(x, v) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_ADEXT) = (v)) +/*@}*/ + +/*! + * @name Register I2C_C2, field GCAEN[7] (RW) + * + * Enables general call address. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_I2C_C2_GCAEN (7U) /*!< Bit position for I2C_C2_GCAEN. */ +#define BM_I2C_C2_GCAEN (0x80U) /*!< Bit mask for I2C_C2_GCAEN. */ +#define BS_I2C_C2_GCAEN (1U) /*!< Bit field size in bits for I2C_C2_GCAEN. */ + +/*! @brief Read current value of the I2C_C2_GCAEN field. */ +#define BR_I2C_C2_GCAEN(x) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_GCAEN)) + +/*! @brief Format value for bitfield I2C_C2_GCAEN. */ +#define BF_I2C_C2_GCAEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_C2_GCAEN) & BM_I2C_C2_GCAEN) + +/*! @brief Set the GCAEN field to a new value. */ +#define BW_I2C_C2_GCAEN(x, v) (BITBAND_ACCESS8(HW_I2C_C2_ADDR(x), BP_I2C_C2_GCAEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_FLT - I2C Programmable Input Glitch Filter register + ******************************************************************************/ + +/*! + * @brief HW_I2C_FLT - I2C Programmable Input Glitch Filter register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_flt +{ + uint8_t U; + struct _hw_i2c_flt_bitfields + { + uint8_t FLT : 4; /*!< [3:0] I2C Programmable Filter Factor */ + uint8_t STARTF : 1; /*!< [4] I2C Bus Start Detect Flag */ + uint8_t SSIE : 1; /*!< [5] I2C Bus Stop or Start Interrupt Enable */ + uint8_t STOPF : 1; /*!< [6] I2C Bus Stop Detect Flag */ + uint8_t SHEN : 1; /*!< [7] Stop Hold Enable */ + } B; +} hw_i2c_flt_t; + +/*! + * @name Constants and macros for entire I2C_FLT register + */ +/*@{*/ +#define HW_I2C_FLT_ADDR(x) ((x) + 0x6U) + +#define HW_I2C_FLT(x) (*(__IO hw_i2c_flt_t *) HW_I2C_FLT_ADDR(x)) +#define HW_I2C_FLT_RD(x) (HW_I2C_FLT(x).U) +#define HW_I2C_FLT_WR(x, v) (HW_I2C_FLT(x).U = (v)) +#define HW_I2C_FLT_SET(x, v) (HW_I2C_FLT_WR(x, HW_I2C_FLT_RD(x) | (v))) +#define HW_I2C_FLT_CLR(x, v) (HW_I2C_FLT_WR(x, HW_I2C_FLT_RD(x) & ~(v))) +#define HW_I2C_FLT_TOG(x, v) (HW_I2C_FLT_WR(x, HW_I2C_FLT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_FLT bitfields + */ + +/*! + * @name Register I2C_FLT, field FLT[3:0] (RW) + * + * Controls the width of the glitch, in terms of I2C module clock cycles, that + * the filter must absorb. For any glitch whose size is less than or equal to this + * width setting, the filter does not allow the glitch to pass. + * + * Values: + * - 0 - No filter/bypass + */ +/*@{*/ +#define BP_I2C_FLT_FLT (0U) /*!< Bit position for I2C_FLT_FLT. */ +#define BM_I2C_FLT_FLT (0x0FU) /*!< Bit mask for I2C_FLT_FLT. */ +#define BS_I2C_FLT_FLT (4U) /*!< Bit field size in bits for I2C_FLT_FLT. */ + +/*! @brief Read current value of the I2C_FLT_FLT field. */ +#define BR_I2C_FLT_FLT(x) (HW_I2C_FLT(x).B.FLT) + +/*! @brief Format value for bitfield I2C_FLT_FLT. */ +#define BF_I2C_FLT_FLT(v) ((uint8_t)((uint8_t)(v) << BP_I2C_FLT_FLT) & BM_I2C_FLT_FLT) + +/*! @brief Set the FLT field to a new value. */ +#define BW_I2C_FLT_FLT(x, v) (HW_I2C_FLT_WR(x, (HW_I2C_FLT_RD(x) & ~BM_I2C_FLT_FLT) | BF_I2C_FLT_FLT(v))) +/*@}*/ + +/*! + * @name Register I2C_FLT, field STARTF[4] (W1C) + * + * Hardware sets this bit when the I2C bus's start status is detected. The + * STARTF bit must be cleared by writing 1 to it. + * + * Values: + * - 0 - No start happens on I2C bus + * - 1 - Start detected on I2C bus + */ +/*@{*/ +#define BP_I2C_FLT_STARTF (4U) /*!< Bit position for I2C_FLT_STARTF. */ +#define BM_I2C_FLT_STARTF (0x10U) /*!< Bit mask for I2C_FLT_STARTF. */ +#define BS_I2C_FLT_STARTF (1U) /*!< Bit field size in bits for I2C_FLT_STARTF. */ + +/*! @brief Read current value of the I2C_FLT_STARTF field. */ +#define BR_I2C_FLT_STARTF(x) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_STARTF)) + +/*! @brief Format value for bitfield I2C_FLT_STARTF. */ +#define BF_I2C_FLT_STARTF(v) ((uint8_t)((uint8_t)(v) << BP_I2C_FLT_STARTF) & BM_I2C_FLT_STARTF) + +/*! @brief Set the STARTF field to a new value. */ +#define BW_I2C_FLT_STARTF(x, v) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_STARTF) = (v)) +/*@}*/ + +/*! + * @name Register I2C_FLT, field SSIE[5] (RW) + * + * This bit enables the interrupt for I2C bus stop or start detection. To clear + * the I2C bus stop or start detection interrupt: In the interrupt service + * routine, first clear the STOPF or STARTF bit by writing 1 to it, and then clear the + * IICIF bit in the status register. If this sequence is reversed, the IICIF bit + * is asserted again. + * + * Values: + * - 0 - Stop or start detection interrupt is disabled + * - 1 - Stop or start detection interrupt is enabled + */ +/*@{*/ +#define BP_I2C_FLT_SSIE (5U) /*!< Bit position for I2C_FLT_SSIE. */ +#define BM_I2C_FLT_SSIE (0x20U) /*!< Bit mask for I2C_FLT_SSIE. */ +#define BS_I2C_FLT_SSIE (1U) /*!< Bit field size in bits for I2C_FLT_SSIE. */ + +/*! @brief Read current value of the I2C_FLT_SSIE field. */ +#define BR_I2C_FLT_SSIE(x) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_SSIE)) + +/*! @brief Format value for bitfield I2C_FLT_SSIE. */ +#define BF_I2C_FLT_SSIE(v) ((uint8_t)((uint8_t)(v) << BP_I2C_FLT_SSIE) & BM_I2C_FLT_SSIE) + +/*! @brief Set the SSIE field to a new value. */ +#define BW_I2C_FLT_SSIE(x, v) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_SSIE) = (v)) +/*@}*/ + +/*! + * @name Register I2C_FLT, field STOPF[6] (W1C) + * + * Hardware sets this bit when the I2C bus's stop status is detected. The STOPF + * bit must be cleared by writing 1 to it. + * + * Values: + * - 0 - No stop happens on I2C bus + * - 1 - Stop detected on I2C bus + */ +/*@{*/ +#define BP_I2C_FLT_STOPF (6U) /*!< Bit position for I2C_FLT_STOPF. */ +#define BM_I2C_FLT_STOPF (0x40U) /*!< Bit mask for I2C_FLT_STOPF. */ +#define BS_I2C_FLT_STOPF (1U) /*!< Bit field size in bits for I2C_FLT_STOPF. */ + +/*! @brief Read current value of the I2C_FLT_STOPF field. */ +#define BR_I2C_FLT_STOPF(x) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_STOPF)) + +/*! @brief Format value for bitfield I2C_FLT_STOPF. */ +#define BF_I2C_FLT_STOPF(v) ((uint8_t)((uint8_t)(v) << BP_I2C_FLT_STOPF) & BM_I2C_FLT_STOPF) + +/*! @brief Set the STOPF field to a new value. */ +#define BW_I2C_FLT_STOPF(x, v) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_STOPF) = (v)) +/*@}*/ + +/*! + * @name Register I2C_FLT, field SHEN[7] (RW) + * + * Set this bit to hold off entry to stop mode when any data transmission or + * reception is occurring. The following scenario explains the holdoff + * functionality: The I2C module is configured for a basic transfer, and the SHEN bit is set + * to 1. A transfer begins. The MCU signals the I2C module to enter stop mode. The + * byte currently being transferred, including both address and data, completes + * its transfer. The I2C slave or master acknowledges that the in-transfer byte + * completed its transfer and acknowledges the request to enter stop mode. After + * receiving the I2C module's acknowledgment of the request to enter stop mode, + * the MCU determines whether to shut off the I2C module's clock. If the SHEN bit + * is set to 1 and the I2C module is in an idle or disabled state when the MCU + * signals to enter stop mode, the module immediately acknowledges the request to + * enter stop mode. If SHEN is cleared to 0 and the overall data transmission or + * reception that was suspended by stop mode entry was incomplete: To resume the + * overall transmission or reception after the MCU exits stop mode, software must + * reinitialize the transfer by resending the address of the slave. If the I2C + * Control Register 1's IICIE bit was set to 1 before the MCU entered stop mode, + * system software will receive the interrupt triggered by the I2C Status Register's + * TCF bit after the MCU wakes from the stop mode. + * + * Values: + * - 0 - Stop holdoff is disabled. The MCU's entry to stop mode is not gated. + * - 1 - Stop holdoff is enabled. + */ +/*@{*/ +#define BP_I2C_FLT_SHEN (7U) /*!< Bit position for I2C_FLT_SHEN. */ +#define BM_I2C_FLT_SHEN (0x80U) /*!< Bit mask for I2C_FLT_SHEN. */ +#define BS_I2C_FLT_SHEN (1U) /*!< Bit field size in bits for I2C_FLT_SHEN. */ + +/*! @brief Read current value of the I2C_FLT_SHEN field. */ +#define BR_I2C_FLT_SHEN(x) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_SHEN)) + +/*! @brief Format value for bitfield I2C_FLT_SHEN. */ +#define BF_I2C_FLT_SHEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_FLT_SHEN) & BM_I2C_FLT_SHEN) + +/*! @brief Set the SHEN field to a new value. */ +#define BW_I2C_FLT_SHEN(x, v) (BITBAND_ACCESS8(HW_I2C_FLT_ADDR(x), BP_I2C_FLT_SHEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_RA - I2C Range Address register + ******************************************************************************/ + +/*! + * @brief HW_I2C_RA - I2C Range Address register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_ra +{ + uint8_t U; + struct _hw_i2c_ra_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t RAD : 7; /*!< [7:1] Range Slave Address */ + } B; +} hw_i2c_ra_t; + +/*! + * @name Constants and macros for entire I2C_RA register + */ +/*@{*/ +#define HW_I2C_RA_ADDR(x) ((x) + 0x7U) + +#define HW_I2C_RA(x) (*(__IO hw_i2c_ra_t *) HW_I2C_RA_ADDR(x)) +#define HW_I2C_RA_RD(x) (HW_I2C_RA(x).U) +#define HW_I2C_RA_WR(x, v) (HW_I2C_RA(x).U = (v)) +#define HW_I2C_RA_SET(x, v) (HW_I2C_RA_WR(x, HW_I2C_RA_RD(x) | (v))) +#define HW_I2C_RA_CLR(x, v) (HW_I2C_RA_WR(x, HW_I2C_RA_RD(x) & ~(v))) +#define HW_I2C_RA_TOG(x, v) (HW_I2C_RA_WR(x, HW_I2C_RA_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_RA bitfields + */ + +/*! + * @name Register I2C_RA, field RAD[7:1] (RW) + * + * This field contains the slave address to be used by the I2C module. The field + * is used in the 7-bit address scheme. If I2C_C2[RMEN] is set to 1, any nonzero + * value write enables this register. This register value can be considered as a + * maximum boundary in the range matching mode. + */ +/*@{*/ +#define BP_I2C_RA_RAD (1U) /*!< Bit position for I2C_RA_RAD. */ +#define BM_I2C_RA_RAD (0xFEU) /*!< Bit mask for I2C_RA_RAD. */ +#define BS_I2C_RA_RAD (7U) /*!< Bit field size in bits for I2C_RA_RAD. */ + +/*! @brief Read current value of the I2C_RA_RAD field. */ +#define BR_I2C_RA_RAD(x) (HW_I2C_RA(x).B.RAD) + +/*! @brief Format value for bitfield I2C_RA_RAD. */ +#define BF_I2C_RA_RAD(v) ((uint8_t)((uint8_t)(v) << BP_I2C_RA_RAD) & BM_I2C_RA_RAD) + +/*! @brief Set the RAD field to a new value. */ +#define BW_I2C_RA_RAD(x, v) (HW_I2C_RA_WR(x, (HW_I2C_RA_RD(x) & ~BM_I2C_RA_RAD) | BF_I2C_RA_RAD(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2C_SMB - I2C SMBus Control and Status register + ******************************************************************************/ + +/*! + * @brief HW_I2C_SMB - I2C SMBus Control and Status register (RW) + * + * Reset value: 0x00U + * + * When the SCL and SDA signals are held high for a length of time greater than + * the high timeout period, the SHTF1 flag sets. Before reaching this threshold, + * while the system is detecting how long these signals are being held high, a + * master assumes that the bus is free. However, the SHTF1 bit is set to 1 in the + * bus transmission process with the idle bus state. When the TCKSEL bit is set, + * there is no need to monitor the SHTF1 bit because the bus speed is too high to + * match the protocol of SMBus. + */ +typedef union _hw_i2c_smb +{ + uint8_t U; + struct _hw_i2c_smb_bitfields + { + uint8_t SHTF2IE : 1; /*!< [0] SHTF2 Interrupt Enable */ + uint8_t SHTF2 : 1; /*!< [1] SCL High Timeout Flag 2 */ + uint8_t SHTF1 : 1; /*!< [2] SCL High Timeout Flag 1 */ + uint8_t SLTF : 1; /*!< [3] SCL Low Timeout Flag */ + uint8_t TCKSEL : 1; /*!< [4] Timeout Counter Clock Select */ + uint8_t SIICAEN : 1; /*!< [5] Second I2C Address Enable */ + uint8_t ALERTEN : 1; /*!< [6] SMBus Alert Response Address Enable */ + uint8_t FACK : 1; /*!< [7] Fast NACK/ACK Enable */ + } B; +} hw_i2c_smb_t; + +/*! + * @name Constants and macros for entire I2C_SMB register + */ +/*@{*/ +#define HW_I2C_SMB_ADDR(x) ((x) + 0x8U) + +#define HW_I2C_SMB(x) (*(__IO hw_i2c_smb_t *) HW_I2C_SMB_ADDR(x)) +#define HW_I2C_SMB_RD(x) (HW_I2C_SMB(x).U) +#define HW_I2C_SMB_WR(x, v) (HW_I2C_SMB(x).U = (v)) +#define HW_I2C_SMB_SET(x, v) (HW_I2C_SMB_WR(x, HW_I2C_SMB_RD(x) | (v))) +#define HW_I2C_SMB_CLR(x, v) (HW_I2C_SMB_WR(x, HW_I2C_SMB_RD(x) & ~(v))) +#define HW_I2C_SMB_TOG(x, v) (HW_I2C_SMB_WR(x, HW_I2C_SMB_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_SMB bitfields + */ + +/*! + * @name Register I2C_SMB, field SHTF2IE[0] (RW) + * + * Enables SCL high and SDA low timeout interrupt. + * + * Values: + * - 0 - SHTF2 interrupt is disabled + * - 1 - SHTF2 interrupt is enabled + */ +/*@{*/ +#define BP_I2C_SMB_SHTF2IE (0U) /*!< Bit position for I2C_SMB_SHTF2IE. */ +#define BM_I2C_SMB_SHTF2IE (0x01U) /*!< Bit mask for I2C_SMB_SHTF2IE. */ +#define BS_I2C_SMB_SHTF2IE (1U) /*!< Bit field size in bits for I2C_SMB_SHTF2IE. */ + +/*! @brief Read current value of the I2C_SMB_SHTF2IE field. */ +#define BR_I2C_SMB_SHTF2IE(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SHTF2IE)) + +/*! @brief Format value for bitfield I2C_SMB_SHTF2IE. */ +#define BF_I2C_SMB_SHTF2IE(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_SHTF2IE) & BM_I2C_SMB_SHTF2IE) + +/*! @brief Set the SHTF2IE field to a new value. */ +#define BW_I2C_SMB_SHTF2IE(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SHTF2IE) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field SHTF2[1] (W1C) + * + * This bit sets when SCL is held high and SDA is held low more than clock * + * LoValue / 512. Software clears this bit by writing 1 to it. + * + * Values: + * - 0 - No SCL high and SDA low timeout occurs + * - 1 - SCL high and SDA low timeout occurs + */ +/*@{*/ +#define BP_I2C_SMB_SHTF2 (1U) /*!< Bit position for I2C_SMB_SHTF2. */ +#define BM_I2C_SMB_SHTF2 (0x02U) /*!< Bit mask for I2C_SMB_SHTF2. */ +#define BS_I2C_SMB_SHTF2 (1U) /*!< Bit field size in bits for I2C_SMB_SHTF2. */ + +/*! @brief Read current value of the I2C_SMB_SHTF2 field. */ +#define BR_I2C_SMB_SHTF2(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SHTF2)) + +/*! @brief Format value for bitfield I2C_SMB_SHTF2. */ +#define BF_I2C_SMB_SHTF2(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_SHTF2) & BM_I2C_SMB_SHTF2) + +/*! @brief Set the SHTF2 field to a new value. */ +#define BW_I2C_SMB_SHTF2(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SHTF2) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field SHTF1[2] (RO) + * + * This read-only bit sets when SCL and SDA are held high more than clock * + * LoValue / 512, which indicates the bus is free. This bit is cleared automatically. + * + * Values: + * - 0 - No SCL high and SDA high timeout occurs + * - 1 - SCL high and SDA high timeout occurs + */ +/*@{*/ +#define BP_I2C_SMB_SHTF1 (2U) /*!< Bit position for I2C_SMB_SHTF1. */ +#define BM_I2C_SMB_SHTF1 (0x04U) /*!< Bit mask for I2C_SMB_SHTF1. */ +#define BS_I2C_SMB_SHTF1 (1U) /*!< Bit field size in bits for I2C_SMB_SHTF1. */ + +/*! @brief Read current value of the I2C_SMB_SHTF1 field. */ +#define BR_I2C_SMB_SHTF1(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SHTF1)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field SLTF[3] (W1C) + * + * This bit is set when the SLT register (consisting of the SLTH and SLTL + * registers) is loaded with a non-zero value (LoValue) and an SCL low timeout occurs. + * Software clears this bit by writing a logic 1 to it. The low timeout function + * is disabled when the SLT register's value is 0. + * + * Values: + * - 0 - No low timeout occurs + * - 1 - Low timeout occurs + */ +/*@{*/ +#define BP_I2C_SMB_SLTF (3U) /*!< Bit position for I2C_SMB_SLTF. */ +#define BM_I2C_SMB_SLTF (0x08U) /*!< Bit mask for I2C_SMB_SLTF. */ +#define BS_I2C_SMB_SLTF (1U) /*!< Bit field size in bits for I2C_SMB_SLTF. */ + +/*! @brief Read current value of the I2C_SMB_SLTF field. */ +#define BR_I2C_SMB_SLTF(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SLTF)) + +/*! @brief Format value for bitfield I2C_SMB_SLTF. */ +#define BF_I2C_SMB_SLTF(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_SLTF) & BM_I2C_SMB_SLTF) + +/*! @brief Set the SLTF field to a new value. */ +#define BW_I2C_SMB_SLTF(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SLTF) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field TCKSEL[4] (RW) + * + * Selects the clock source of the timeout counter. + * + * Values: + * - 0 - Timeout counter counts at the frequency of the I2C module clock / 64 + * - 1 - Timeout counter counts at the frequency of the I2C module clock + */ +/*@{*/ +#define BP_I2C_SMB_TCKSEL (4U) /*!< Bit position for I2C_SMB_TCKSEL. */ +#define BM_I2C_SMB_TCKSEL (0x10U) /*!< Bit mask for I2C_SMB_TCKSEL. */ +#define BS_I2C_SMB_TCKSEL (1U) /*!< Bit field size in bits for I2C_SMB_TCKSEL. */ + +/*! @brief Read current value of the I2C_SMB_TCKSEL field. */ +#define BR_I2C_SMB_TCKSEL(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_TCKSEL)) + +/*! @brief Format value for bitfield I2C_SMB_TCKSEL. */ +#define BF_I2C_SMB_TCKSEL(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_TCKSEL) & BM_I2C_SMB_TCKSEL) + +/*! @brief Set the TCKSEL field to a new value. */ +#define BW_I2C_SMB_TCKSEL(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_TCKSEL) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field SIICAEN[5] (RW) + * + * Enables or disables SMBus device default address. + * + * Values: + * - 0 - I2C address register 2 matching is disabled + * - 1 - I2C address register 2 matching is enabled + */ +/*@{*/ +#define BP_I2C_SMB_SIICAEN (5U) /*!< Bit position for I2C_SMB_SIICAEN. */ +#define BM_I2C_SMB_SIICAEN (0x20U) /*!< Bit mask for I2C_SMB_SIICAEN. */ +#define BS_I2C_SMB_SIICAEN (1U) /*!< Bit field size in bits for I2C_SMB_SIICAEN. */ + +/*! @brief Read current value of the I2C_SMB_SIICAEN field. */ +#define BR_I2C_SMB_SIICAEN(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SIICAEN)) + +/*! @brief Format value for bitfield I2C_SMB_SIICAEN. */ +#define BF_I2C_SMB_SIICAEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_SIICAEN) & BM_I2C_SMB_SIICAEN) + +/*! @brief Set the SIICAEN field to a new value. */ +#define BW_I2C_SMB_SIICAEN(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_SIICAEN) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field ALERTEN[6] (RW) + * + * Enables or disables SMBus alert response address matching. After the host + * responds to a device that used the alert response address, you must use software + * to put the device's address on the bus. The alert protocol is described in the + * SMBus specification. + * + * Values: + * - 0 - SMBus alert response address matching is disabled + * - 1 - SMBus alert response address matching is enabled + */ +/*@{*/ +#define BP_I2C_SMB_ALERTEN (6U) /*!< Bit position for I2C_SMB_ALERTEN. */ +#define BM_I2C_SMB_ALERTEN (0x40U) /*!< Bit mask for I2C_SMB_ALERTEN. */ +#define BS_I2C_SMB_ALERTEN (1U) /*!< Bit field size in bits for I2C_SMB_ALERTEN. */ + +/*! @brief Read current value of the I2C_SMB_ALERTEN field. */ +#define BR_I2C_SMB_ALERTEN(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_ALERTEN)) + +/*! @brief Format value for bitfield I2C_SMB_ALERTEN. */ +#define BF_I2C_SMB_ALERTEN(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_ALERTEN) & BM_I2C_SMB_ALERTEN) + +/*! @brief Set the ALERTEN field to a new value. */ +#define BW_I2C_SMB_ALERTEN(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_ALERTEN) = (v)) +/*@}*/ + +/*! + * @name Register I2C_SMB, field FACK[7] (RW) + * + * For SMBus packet error checking, the CPU must be able to issue an ACK or NACK + * according to the result of receiving data byte. + * + * Values: + * - 0 - An ACK or NACK is sent on the following receiving data byte + * - 1 - Writing 0 to TXAK after receiving a data byte generates an ACK. Writing + * 1 to TXAK after receiving a data byte generates a NACK. + */ +/*@{*/ +#define BP_I2C_SMB_FACK (7U) /*!< Bit position for I2C_SMB_FACK. */ +#define BM_I2C_SMB_FACK (0x80U) /*!< Bit mask for I2C_SMB_FACK. */ +#define BS_I2C_SMB_FACK (1U) /*!< Bit field size in bits for I2C_SMB_FACK. */ + +/*! @brief Read current value of the I2C_SMB_FACK field. */ +#define BR_I2C_SMB_FACK(x) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_FACK)) + +/*! @brief Format value for bitfield I2C_SMB_FACK. */ +#define BF_I2C_SMB_FACK(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SMB_FACK) & BM_I2C_SMB_FACK) + +/*! @brief Set the FACK field to a new value. */ +#define BW_I2C_SMB_FACK(x, v) (BITBAND_ACCESS8(HW_I2C_SMB_ADDR(x), BP_I2C_SMB_FACK) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_A2 - I2C Address Register 2 + ******************************************************************************/ + +/*! + * @brief HW_I2C_A2 - I2C Address Register 2 (RW) + * + * Reset value: 0xC2U + */ +typedef union _hw_i2c_a2 +{ + uint8_t U; + struct _hw_i2c_a2_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t SAD : 7; /*!< [7:1] SMBus Address */ + } B; +} hw_i2c_a2_t; + +/*! + * @name Constants and macros for entire I2C_A2 register + */ +/*@{*/ +#define HW_I2C_A2_ADDR(x) ((x) + 0x9U) + +#define HW_I2C_A2(x) (*(__IO hw_i2c_a2_t *) HW_I2C_A2_ADDR(x)) +#define HW_I2C_A2_RD(x) (HW_I2C_A2(x).U) +#define HW_I2C_A2_WR(x, v) (HW_I2C_A2(x).U = (v)) +#define HW_I2C_A2_SET(x, v) (HW_I2C_A2_WR(x, HW_I2C_A2_RD(x) | (v))) +#define HW_I2C_A2_CLR(x, v) (HW_I2C_A2_WR(x, HW_I2C_A2_RD(x) & ~(v))) +#define HW_I2C_A2_TOG(x, v) (HW_I2C_A2_WR(x, HW_I2C_A2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_A2 bitfields + */ + +/*! + * @name Register I2C_A2, field SAD[7:1] (RW) + * + * Contains the slave address used by the SMBus. This field is used on the + * device default address or other related addresses. + */ +/*@{*/ +#define BP_I2C_A2_SAD (1U) /*!< Bit position for I2C_A2_SAD. */ +#define BM_I2C_A2_SAD (0xFEU) /*!< Bit mask for I2C_A2_SAD. */ +#define BS_I2C_A2_SAD (7U) /*!< Bit field size in bits for I2C_A2_SAD. */ + +/*! @brief Read current value of the I2C_A2_SAD field. */ +#define BR_I2C_A2_SAD(x) (HW_I2C_A2(x).B.SAD) + +/*! @brief Format value for bitfield I2C_A2_SAD. */ +#define BF_I2C_A2_SAD(v) ((uint8_t)((uint8_t)(v) << BP_I2C_A2_SAD) & BM_I2C_A2_SAD) + +/*! @brief Set the SAD field to a new value. */ +#define BW_I2C_A2_SAD(x, v) (HW_I2C_A2_WR(x, (HW_I2C_A2_RD(x) & ~BM_I2C_A2_SAD) | BF_I2C_A2_SAD(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2C_SLTH - I2C SCL Low Timeout Register High + ******************************************************************************/ + +/*! + * @brief HW_I2C_SLTH - I2C SCL Low Timeout Register High (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_slth +{ + uint8_t U; + struct _hw_i2c_slth_bitfields + { + uint8_t SSLT : 8; /*!< [7:0] */ + } B; +} hw_i2c_slth_t; + +/*! + * @name Constants and macros for entire I2C_SLTH register + */ +/*@{*/ +#define HW_I2C_SLTH_ADDR(x) ((x) + 0xAU) + +#define HW_I2C_SLTH(x) (*(__IO hw_i2c_slth_t *) HW_I2C_SLTH_ADDR(x)) +#define HW_I2C_SLTH_RD(x) (HW_I2C_SLTH(x).U) +#define HW_I2C_SLTH_WR(x, v) (HW_I2C_SLTH(x).U = (v)) +#define HW_I2C_SLTH_SET(x, v) (HW_I2C_SLTH_WR(x, HW_I2C_SLTH_RD(x) | (v))) +#define HW_I2C_SLTH_CLR(x, v) (HW_I2C_SLTH_WR(x, HW_I2C_SLTH_RD(x) & ~(v))) +#define HW_I2C_SLTH_TOG(x, v) (HW_I2C_SLTH_WR(x, HW_I2C_SLTH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_SLTH bitfields + */ + +/*! + * @name Register I2C_SLTH, field SSLT[7:0] (RW) + * + * Most significant byte of SCL low timeout value that determines the timeout + * period of SCL low. + */ +/*@{*/ +#define BP_I2C_SLTH_SSLT (0U) /*!< Bit position for I2C_SLTH_SSLT. */ +#define BM_I2C_SLTH_SSLT (0xFFU) /*!< Bit mask for I2C_SLTH_SSLT. */ +#define BS_I2C_SLTH_SSLT (8U) /*!< Bit field size in bits for I2C_SLTH_SSLT. */ + +/*! @brief Read current value of the I2C_SLTH_SSLT field. */ +#define BR_I2C_SLTH_SSLT(x) (HW_I2C_SLTH(x).U) + +/*! @brief Format value for bitfield I2C_SLTH_SSLT. */ +#define BF_I2C_SLTH_SSLT(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SLTH_SSLT) & BM_I2C_SLTH_SSLT) + +/*! @brief Set the SSLT field to a new value. */ +#define BW_I2C_SLTH_SSLT(x, v) (HW_I2C_SLTH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_I2C_SLTL - I2C SCL Low Timeout Register Low + ******************************************************************************/ + +/*! + * @brief HW_I2C_SLTL - I2C SCL Low Timeout Register Low (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_i2c_sltl +{ + uint8_t U; + struct _hw_i2c_sltl_bitfields + { + uint8_t SSLT : 8; /*!< [7:0] */ + } B; +} hw_i2c_sltl_t; + +/*! + * @name Constants and macros for entire I2C_SLTL register + */ +/*@{*/ +#define HW_I2C_SLTL_ADDR(x) ((x) + 0xBU) + +#define HW_I2C_SLTL(x) (*(__IO hw_i2c_sltl_t *) HW_I2C_SLTL_ADDR(x)) +#define HW_I2C_SLTL_RD(x) (HW_I2C_SLTL(x).U) +#define HW_I2C_SLTL_WR(x, v) (HW_I2C_SLTL(x).U = (v)) +#define HW_I2C_SLTL_SET(x, v) (HW_I2C_SLTL_WR(x, HW_I2C_SLTL_RD(x) | (v))) +#define HW_I2C_SLTL_CLR(x, v) (HW_I2C_SLTL_WR(x, HW_I2C_SLTL_RD(x) & ~(v))) +#define HW_I2C_SLTL_TOG(x, v) (HW_I2C_SLTL_WR(x, HW_I2C_SLTL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2C_SLTL bitfields + */ + +/*! + * @name Register I2C_SLTL, field SSLT[7:0] (RW) + * + * Least significant byte of SCL low timeout value that determines the timeout + * period of SCL low. + */ +/*@{*/ +#define BP_I2C_SLTL_SSLT (0U) /*!< Bit position for I2C_SLTL_SSLT. */ +#define BM_I2C_SLTL_SSLT (0xFFU) /*!< Bit mask for I2C_SLTL_SSLT. */ +#define BS_I2C_SLTL_SSLT (8U) /*!< Bit field size in bits for I2C_SLTL_SSLT. */ + +/*! @brief Read current value of the I2C_SLTL_SSLT field. */ +#define BR_I2C_SLTL_SSLT(x) (HW_I2C_SLTL(x).U) + +/*! @brief Format value for bitfield I2C_SLTL_SSLT. */ +#define BF_I2C_SLTL_SSLT(v) ((uint8_t)((uint8_t)(v) << BP_I2C_SLTL_SSLT) & BM_I2C_SLTL_SSLT) + +/*! @brief Set the SSLT field to a new value. */ +#define BW_I2C_SLTL_SSLT(x, v) (HW_I2C_SLTL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * hw_i2c_t - module struct + ******************************************************************************/ +/*! + * @brief All I2C module registers. + */ +#pragma pack(1) +typedef struct _hw_i2c +{ + __IO hw_i2c_a1_t A1; /*!< [0x0] I2C Address Register 1 */ + __IO hw_i2c_f_t F; /*!< [0x1] I2C Frequency Divider register */ + __IO hw_i2c_c1_t C1; /*!< [0x2] I2C Control Register 1 */ + __IO hw_i2c_s_t S; /*!< [0x3] I2C Status register */ + __IO hw_i2c_d_t D; /*!< [0x4] I2C Data I/O register */ + __IO hw_i2c_c2_t C2; /*!< [0x5] I2C Control Register 2 */ + __IO hw_i2c_flt_t FLT; /*!< [0x6] I2C Programmable Input Glitch Filter register */ + __IO hw_i2c_ra_t RA; /*!< [0x7] I2C Range Address register */ + __IO hw_i2c_smb_t SMB; /*!< [0x8] I2C SMBus Control and Status register */ + __IO hw_i2c_a2_t A2; /*!< [0x9] I2C Address Register 2 */ + __IO hw_i2c_slth_t SLTH; /*!< [0xA] I2C SCL Low Timeout Register High */ + __IO hw_i2c_sltl_t SLTL; /*!< [0xB] I2C SCL Low Timeout Register Low */ +} hw_i2c_t; +#pragma pack() + +/*! @brief Macro to access all I2C registers. */ +/*! @param x I2C module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_I2C(I2C0_BASE)</code>. */ +#define HW_I2C(x) (*(hw_i2c_t *)(x)) + +#endif /* __HW_I2C_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2s.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2s.h new file mode 100644 index 0000000000..a8ae4de261 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_i2s.h @@ -0,0 +1,3270 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_I2S_REGISTERS_H__ +#define __HW_I2S_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 I2S + * + * Inter-IC Sound / Synchronous Audio Interface + * + * Registers defined in this header file: + * - HW_I2S_TCSR - SAI Transmit Control Register + * - HW_I2S_TCR1 - SAI Transmit Configuration 1 Register + * - HW_I2S_TCR2 - SAI Transmit Configuration 2 Register + * - HW_I2S_TCR3 - SAI Transmit Configuration 3 Register + * - HW_I2S_TCR4 - SAI Transmit Configuration 4 Register + * - HW_I2S_TCR5 - SAI Transmit Configuration 5 Register + * - HW_I2S_TDRn - SAI Transmit Data Register + * - HW_I2S_TFRn - SAI Transmit FIFO Register + * - HW_I2S_TMR - SAI Transmit Mask Register + * - HW_I2S_RCSR - SAI Receive Control Register + * - HW_I2S_RCR1 - SAI Receive Configuration 1 Register + * - HW_I2S_RCR2 - SAI Receive Configuration 2 Register + * - HW_I2S_RCR3 - SAI Receive Configuration 3 Register + * - HW_I2S_RCR4 - SAI Receive Configuration 4 Register + * - HW_I2S_RCR5 - SAI Receive Configuration 5 Register + * - HW_I2S_RDRn - SAI Receive Data Register + * - HW_I2S_RFRn - SAI Receive FIFO Register + * - HW_I2S_RMR - SAI Receive Mask Register + * - HW_I2S_MCR - SAI MCLK Control Register + * - HW_I2S_MDR - SAI MCLK Divide Register + * + * - hw_i2s_t - Struct containing all module registers. + */ + +#define HW_I2S_INSTANCE_COUNT (1U) /*!< Number of instances of the I2S module. */ + +/******************************************************************************* + * HW_I2S_TCSR - SAI Transmit Control Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCSR - SAI Transmit Control Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_tcsr +{ + uint32_t U; + struct _hw_i2s_tcsr_bitfields + { + uint32_t FRDE : 1; /*!< [0] FIFO Request DMA Enable */ + uint32_t FWDE : 1; /*!< [1] FIFO Warning DMA Enable */ + uint32_t RESERVED0 : 6; /*!< [7:2] */ + uint32_t FRIE : 1; /*!< [8] FIFO Request Interrupt Enable */ + uint32_t FWIE : 1; /*!< [9] FIFO Warning Interrupt Enable */ + uint32_t FEIE : 1; /*!< [10] FIFO Error Interrupt Enable */ + uint32_t SEIE : 1; /*!< [11] Sync Error Interrupt Enable */ + uint32_t WSIE : 1; /*!< [12] Word Start Interrupt Enable */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t FRF : 1; /*!< [16] FIFO Request Flag */ + uint32_t FWF : 1; /*!< [17] FIFO Warning Flag */ + uint32_t FEF : 1; /*!< [18] FIFO Error Flag */ + uint32_t SEF : 1; /*!< [19] Sync Error Flag */ + uint32_t WSF : 1; /*!< [20] Word Start Flag */ + uint32_t RESERVED2 : 3; /*!< [23:21] */ + uint32_t SR : 1; /*!< [24] Software Reset */ + uint32_t FR : 1; /*!< [25] FIFO Reset */ + uint32_t RESERVED3 : 2; /*!< [27:26] */ + uint32_t BCE : 1; /*!< [28] Bit Clock Enable */ + uint32_t DBGE : 1; /*!< [29] Debug Enable */ + uint32_t STOPE : 1; /*!< [30] Stop Enable */ + uint32_t TE : 1; /*!< [31] Transmitter Enable */ + } B; +} hw_i2s_tcsr_t; + +/*! + * @name Constants and macros for entire I2S_TCSR register + */ +/*@{*/ +#define HW_I2S_TCSR_ADDR(x) ((x) + 0x0U) + +#define HW_I2S_TCSR(x) (*(__IO hw_i2s_tcsr_t *) HW_I2S_TCSR_ADDR(x)) +#define HW_I2S_TCSR_RD(x) (HW_I2S_TCSR(x).U) +#define HW_I2S_TCSR_WR(x, v) (HW_I2S_TCSR(x).U = (v)) +#define HW_I2S_TCSR_SET(x, v) (HW_I2S_TCSR_WR(x, HW_I2S_TCSR_RD(x) | (v))) +#define HW_I2S_TCSR_CLR(x, v) (HW_I2S_TCSR_WR(x, HW_I2S_TCSR_RD(x) & ~(v))) +#define HW_I2S_TCSR_TOG(x, v) (HW_I2S_TCSR_WR(x, HW_I2S_TCSR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCSR bitfields + */ + +/*! + * @name Register I2S_TCSR, field FRDE[0] (RW) + * + * Enables/disables DMA requests. + * + * Values: + * - 0 - Disables the DMA request. + * - 1 - Enables the DMA request. + */ +/*@{*/ +#define BP_I2S_TCSR_FRDE (0U) /*!< Bit position for I2S_TCSR_FRDE. */ +#define BM_I2S_TCSR_FRDE (0x00000001U) /*!< Bit mask for I2S_TCSR_FRDE. */ +#define BS_I2S_TCSR_FRDE (1U) /*!< Bit field size in bits for I2S_TCSR_FRDE. */ + +/*! @brief Read current value of the I2S_TCSR_FRDE field. */ +#define BR_I2S_TCSR_FRDE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FRDE)) + +/*! @brief Format value for bitfield I2S_TCSR_FRDE. */ +#define BF_I2S_TCSR_FRDE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FRDE) & BM_I2S_TCSR_FRDE) + +/*! @brief Set the FRDE field to a new value. */ +#define BW_I2S_TCSR_FRDE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FRDE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FWDE[1] (RW) + * + * Enables/disables DMA requests. + * + * Values: + * - 0 - Disables the DMA request. + * - 1 - Enables the DMA request. + */ +/*@{*/ +#define BP_I2S_TCSR_FWDE (1U) /*!< Bit position for I2S_TCSR_FWDE. */ +#define BM_I2S_TCSR_FWDE (0x00000002U) /*!< Bit mask for I2S_TCSR_FWDE. */ +#define BS_I2S_TCSR_FWDE (1U) /*!< Bit field size in bits for I2S_TCSR_FWDE. */ + +/*! @brief Read current value of the I2S_TCSR_FWDE field. */ +#define BR_I2S_TCSR_FWDE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FWDE)) + +/*! @brief Format value for bitfield I2S_TCSR_FWDE. */ +#define BF_I2S_TCSR_FWDE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FWDE) & BM_I2S_TCSR_FWDE) + +/*! @brief Set the FWDE field to a new value. */ +#define BW_I2S_TCSR_FWDE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FWDE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FRIE[8] (RW) + * + * Enables/disables FIFO request interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_TCSR_FRIE (8U) /*!< Bit position for I2S_TCSR_FRIE. */ +#define BM_I2S_TCSR_FRIE (0x00000100U) /*!< Bit mask for I2S_TCSR_FRIE. */ +#define BS_I2S_TCSR_FRIE (1U) /*!< Bit field size in bits for I2S_TCSR_FRIE. */ + +/*! @brief Read current value of the I2S_TCSR_FRIE field. */ +#define BR_I2S_TCSR_FRIE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FRIE)) + +/*! @brief Format value for bitfield I2S_TCSR_FRIE. */ +#define BF_I2S_TCSR_FRIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FRIE) & BM_I2S_TCSR_FRIE) + +/*! @brief Set the FRIE field to a new value. */ +#define BW_I2S_TCSR_FRIE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FRIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FWIE[9] (RW) + * + * Enables/disables FIFO warning interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_TCSR_FWIE (9U) /*!< Bit position for I2S_TCSR_FWIE. */ +#define BM_I2S_TCSR_FWIE (0x00000200U) /*!< Bit mask for I2S_TCSR_FWIE. */ +#define BS_I2S_TCSR_FWIE (1U) /*!< Bit field size in bits for I2S_TCSR_FWIE. */ + +/*! @brief Read current value of the I2S_TCSR_FWIE field. */ +#define BR_I2S_TCSR_FWIE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FWIE)) + +/*! @brief Format value for bitfield I2S_TCSR_FWIE. */ +#define BF_I2S_TCSR_FWIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FWIE) & BM_I2S_TCSR_FWIE) + +/*! @brief Set the FWIE field to a new value. */ +#define BW_I2S_TCSR_FWIE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FWIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FEIE[10] (RW) + * + * Enables/disables FIFO error interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_TCSR_FEIE (10U) /*!< Bit position for I2S_TCSR_FEIE. */ +#define BM_I2S_TCSR_FEIE (0x00000400U) /*!< Bit mask for I2S_TCSR_FEIE. */ +#define BS_I2S_TCSR_FEIE (1U) /*!< Bit field size in bits for I2S_TCSR_FEIE. */ + +/*! @brief Read current value of the I2S_TCSR_FEIE field. */ +#define BR_I2S_TCSR_FEIE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FEIE)) + +/*! @brief Format value for bitfield I2S_TCSR_FEIE. */ +#define BF_I2S_TCSR_FEIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FEIE) & BM_I2S_TCSR_FEIE) + +/*! @brief Set the FEIE field to a new value. */ +#define BW_I2S_TCSR_FEIE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FEIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field SEIE[11] (RW) + * + * Enables/disables sync error interrupts. + * + * Values: + * - 0 - Disables interrupt. + * - 1 - Enables interrupt. + */ +/*@{*/ +#define BP_I2S_TCSR_SEIE (11U) /*!< Bit position for I2S_TCSR_SEIE. */ +#define BM_I2S_TCSR_SEIE (0x00000800U) /*!< Bit mask for I2S_TCSR_SEIE. */ +#define BS_I2S_TCSR_SEIE (1U) /*!< Bit field size in bits for I2S_TCSR_SEIE. */ + +/*! @brief Read current value of the I2S_TCSR_SEIE field. */ +#define BR_I2S_TCSR_SEIE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SEIE)) + +/*! @brief Format value for bitfield I2S_TCSR_SEIE. */ +#define BF_I2S_TCSR_SEIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_SEIE) & BM_I2S_TCSR_SEIE) + +/*! @brief Set the SEIE field to a new value. */ +#define BW_I2S_TCSR_SEIE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SEIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field WSIE[12] (RW) + * + * Enables/disables word start interrupts. + * + * Values: + * - 0 - Disables interrupt. + * - 1 - Enables interrupt. + */ +/*@{*/ +#define BP_I2S_TCSR_WSIE (12U) /*!< Bit position for I2S_TCSR_WSIE. */ +#define BM_I2S_TCSR_WSIE (0x00001000U) /*!< Bit mask for I2S_TCSR_WSIE. */ +#define BS_I2S_TCSR_WSIE (1U) /*!< Bit field size in bits for I2S_TCSR_WSIE. */ + +/*! @brief Read current value of the I2S_TCSR_WSIE field. */ +#define BR_I2S_TCSR_WSIE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_WSIE)) + +/*! @brief Format value for bitfield I2S_TCSR_WSIE. */ +#define BF_I2S_TCSR_WSIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_WSIE) & BM_I2S_TCSR_WSIE) + +/*! @brief Set the WSIE field to a new value. */ +#define BW_I2S_TCSR_WSIE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_WSIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FRF[16] (RO) + * + * Indicates that the number of words in an enabled transmit channel FIFO is + * less than or equal to the transmit FIFO watermark. + * + * Values: + * - 0 - Transmit FIFO watermark has not been reached. + * - 1 - Transmit FIFO watermark has been reached. + */ +/*@{*/ +#define BP_I2S_TCSR_FRF (16U) /*!< Bit position for I2S_TCSR_FRF. */ +#define BM_I2S_TCSR_FRF (0x00010000U) /*!< Bit mask for I2S_TCSR_FRF. */ +#define BS_I2S_TCSR_FRF (1U) /*!< Bit field size in bits for I2S_TCSR_FRF. */ + +/*! @brief Read current value of the I2S_TCSR_FRF field. */ +#define BR_I2S_TCSR_FRF(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FRF)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FWF[17] (RO) + * + * Indicates that an enabled transmit FIFO is empty. + * + * Values: + * - 0 - No enabled transmit FIFO is empty. + * - 1 - Enabled transmit FIFO is empty. + */ +/*@{*/ +#define BP_I2S_TCSR_FWF (17U) /*!< Bit position for I2S_TCSR_FWF. */ +#define BM_I2S_TCSR_FWF (0x00020000U) /*!< Bit mask for I2S_TCSR_FWF. */ +#define BS_I2S_TCSR_FWF (1U) /*!< Bit field size in bits for I2S_TCSR_FWF. */ + +/*! @brief Read current value of the I2S_TCSR_FWF field. */ +#define BR_I2S_TCSR_FWF(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FWF)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FEF[18] (W1C) + * + * Indicates that an enabled transmit FIFO has underrun. Write a logic 1 to this + * field to clear this flag. + * + * Values: + * - 0 - Transmit underrun not detected. + * - 1 - Transmit underrun detected. + */ +/*@{*/ +#define BP_I2S_TCSR_FEF (18U) /*!< Bit position for I2S_TCSR_FEF. */ +#define BM_I2S_TCSR_FEF (0x00040000U) /*!< Bit mask for I2S_TCSR_FEF. */ +#define BS_I2S_TCSR_FEF (1U) /*!< Bit field size in bits for I2S_TCSR_FEF. */ + +/*! @brief Read current value of the I2S_TCSR_FEF field. */ +#define BR_I2S_TCSR_FEF(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FEF)) + +/*! @brief Format value for bitfield I2S_TCSR_FEF. */ +#define BF_I2S_TCSR_FEF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FEF) & BM_I2S_TCSR_FEF) + +/*! @brief Set the FEF field to a new value. */ +#define BW_I2S_TCSR_FEF(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FEF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field SEF[19] (W1C) + * + * Indicates that an error in the externally-generated frame sync has been + * detected. Write a logic 1 to this field to clear this flag. + * + * Values: + * - 0 - Sync error not detected. + * - 1 - Frame sync error detected. + */ +/*@{*/ +#define BP_I2S_TCSR_SEF (19U) /*!< Bit position for I2S_TCSR_SEF. */ +#define BM_I2S_TCSR_SEF (0x00080000U) /*!< Bit mask for I2S_TCSR_SEF. */ +#define BS_I2S_TCSR_SEF (1U) /*!< Bit field size in bits for I2S_TCSR_SEF. */ + +/*! @brief Read current value of the I2S_TCSR_SEF field. */ +#define BR_I2S_TCSR_SEF(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SEF)) + +/*! @brief Format value for bitfield I2S_TCSR_SEF. */ +#define BF_I2S_TCSR_SEF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_SEF) & BM_I2S_TCSR_SEF) + +/*! @brief Set the SEF field to a new value. */ +#define BW_I2S_TCSR_SEF(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SEF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field WSF[20] (W1C) + * + * Indicates that the start of the configured word has been detected. Write a + * logic 1 to this field to clear this flag. + * + * Values: + * - 0 - Start of word not detected. + * - 1 - Start of word detected. + */ +/*@{*/ +#define BP_I2S_TCSR_WSF (20U) /*!< Bit position for I2S_TCSR_WSF. */ +#define BM_I2S_TCSR_WSF (0x00100000U) /*!< Bit mask for I2S_TCSR_WSF. */ +#define BS_I2S_TCSR_WSF (1U) /*!< Bit field size in bits for I2S_TCSR_WSF. */ + +/*! @brief Read current value of the I2S_TCSR_WSF field. */ +#define BR_I2S_TCSR_WSF(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_WSF)) + +/*! @brief Format value for bitfield I2S_TCSR_WSF. */ +#define BF_I2S_TCSR_WSF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_WSF) & BM_I2S_TCSR_WSF) + +/*! @brief Set the WSF field to a new value. */ +#define BW_I2S_TCSR_WSF(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_WSF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field SR[24] (RW) + * + * When set, resets the internal transmitter logic including the FIFO pointers. + * Software-visible registers are not affected, except for the status registers. + * + * Values: + * - 0 - No effect. + * - 1 - Software reset. + */ +/*@{*/ +#define BP_I2S_TCSR_SR (24U) /*!< Bit position for I2S_TCSR_SR. */ +#define BM_I2S_TCSR_SR (0x01000000U) /*!< Bit mask for I2S_TCSR_SR. */ +#define BS_I2S_TCSR_SR (1U) /*!< Bit field size in bits for I2S_TCSR_SR. */ + +/*! @brief Read current value of the I2S_TCSR_SR field. */ +#define BR_I2S_TCSR_SR(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SR)) + +/*! @brief Format value for bitfield I2S_TCSR_SR. */ +#define BF_I2S_TCSR_SR(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_SR) & BM_I2S_TCSR_SR) + +/*! @brief Set the SR field to a new value. */ +#define BW_I2S_TCSR_SR(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_SR) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field FR[25] (WORZ) + * + * Resets the FIFO pointers. Reading this field will always return zero. FIFO + * pointers should only be reset when the transmitter is disabled or the FIFO error + * flag is set. + * + * Values: + * - 0 - No effect. + * - 1 - FIFO reset. + */ +/*@{*/ +#define BP_I2S_TCSR_FR (25U) /*!< Bit position for I2S_TCSR_FR. */ +#define BM_I2S_TCSR_FR (0x02000000U) /*!< Bit mask for I2S_TCSR_FR. */ +#define BS_I2S_TCSR_FR (1U) /*!< Bit field size in bits for I2S_TCSR_FR. */ + +/*! @brief Format value for bitfield I2S_TCSR_FR. */ +#define BF_I2S_TCSR_FR(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_FR) & BM_I2S_TCSR_FR) + +/*! @brief Set the FR field to a new value. */ +#define BW_I2S_TCSR_FR(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_FR) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field BCE[28] (RW) + * + * Enables the transmit bit clock, separately from the TE. This field is + * automatically set whenever TE is set. When software clears this field, the transmit + * bit clock remains enabled, and this bit remains set, until the end of the + * current frame. + * + * Values: + * - 0 - Transmit bit clock is disabled. + * - 1 - Transmit bit clock is enabled. + */ +/*@{*/ +#define BP_I2S_TCSR_BCE (28U) /*!< Bit position for I2S_TCSR_BCE. */ +#define BM_I2S_TCSR_BCE (0x10000000U) /*!< Bit mask for I2S_TCSR_BCE. */ +#define BS_I2S_TCSR_BCE (1U) /*!< Bit field size in bits for I2S_TCSR_BCE. */ + +/*! @brief Read current value of the I2S_TCSR_BCE field. */ +#define BR_I2S_TCSR_BCE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_BCE)) + +/*! @brief Format value for bitfield I2S_TCSR_BCE. */ +#define BF_I2S_TCSR_BCE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_BCE) & BM_I2S_TCSR_BCE) + +/*! @brief Set the BCE field to a new value. */ +#define BW_I2S_TCSR_BCE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_BCE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field DBGE[29] (RW) + * + * Enables/disables transmitter operation in Debug mode. The transmit bit clock + * is not affected by debug mode. + * + * Values: + * - 0 - Transmitter is disabled in Debug mode, after completing the current + * frame. + * - 1 - Transmitter is enabled in Debug mode. + */ +/*@{*/ +#define BP_I2S_TCSR_DBGE (29U) /*!< Bit position for I2S_TCSR_DBGE. */ +#define BM_I2S_TCSR_DBGE (0x20000000U) /*!< Bit mask for I2S_TCSR_DBGE. */ +#define BS_I2S_TCSR_DBGE (1U) /*!< Bit field size in bits for I2S_TCSR_DBGE. */ + +/*! @brief Read current value of the I2S_TCSR_DBGE field. */ +#define BR_I2S_TCSR_DBGE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_DBGE)) + +/*! @brief Format value for bitfield I2S_TCSR_DBGE. */ +#define BF_I2S_TCSR_DBGE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_DBGE) & BM_I2S_TCSR_DBGE) + +/*! @brief Set the DBGE field to a new value. */ +#define BW_I2S_TCSR_DBGE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_DBGE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field STOPE[30] (RW) + * + * Configures transmitter operation in Stop mode. This field is ignored and the + * transmitter is disabled in all low-leakage stop modes. + * + * Values: + * - 0 - Transmitter disabled in Stop mode. + * - 1 - Transmitter enabled in Stop mode. + */ +/*@{*/ +#define BP_I2S_TCSR_STOPE (30U) /*!< Bit position for I2S_TCSR_STOPE. */ +#define BM_I2S_TCSR_STOPE (0x40000000U) /*!< Bit mask for I2S_TCSR_STOPE. */ +#define BS_I2S_TCSR_STOPE (1U) /*!< Bit field size in bits for I2S_TCSR_STOPE. */ + +/*! @brief Read current value of the I2S_TCSR_STOPE field. */ +#define BR_I2S_TCSR_STOPE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_STOPE)) + +/*! @brief Format value for bitfield I2S_TCSR_STOPE. */ +#define BF_I2S_TCSR_STOPE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_STOPE) & BM_I2S_TCSR_STOPE) + +/*! @brief Set the STOPE field to a new value. */ +#define BW_I2S_TCSR_STOPE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_STOPE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCSR, field TE[31] (RW) + * + * Enables/disables the transmitter. When software clears this field, the + * transmitter remains enabled, and this bit remains set, until the end of the current + * frame. + * + * Values: + * - 0 - Transmitter is disabled. + * - 1 - Transmitter is enabled, or transmitter has been disabled and has not + * yet reached end of frame. + */ +/*@{*/ +#define BP_I2S_TCSR_TE (31U) /*!< Bit position for I2S_TCSR_TE. */ +#define BM_I2S_TCSR_TE (0x80000000U) /*!< Bit mask for I2S_TCSR_TE. */ +#define BS_I2S_TCSR_TE (1U) /*!< Bit field size in bits for I2S_TCSR_TE. */ + +/*! @brief Read current value of the I2S_TCSR_TE field. */ +#define BR_I2S_TCSR_TE(x) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_TE)) + +/*! @brief Format value for bitfield I2S_TCSR_TE. */ +#define BF_I2S_TCSR_TE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCSR_TE) & BM_I2S_TCSR_TE) + +/*! @brief Set the TE field to a new value. */ +#define BW_I2S_TCSR_TE(x, v) (BITBAND_ACCESS32(HW_I2S_TCSR_ADDR(x), BP_I2S_TCSR_TE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TCR1 - SAI Transmit Configuration 1 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCR1 - SAI Transmit Configuration 1 Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_tcr1 +{ + uint32_t U; + struct _hw_i2s_tcr1_bitfields + { + uint32_t TFW : 3; /*!< [2:0] Transmit FIFO Watermark */ + uint32_t RESERVED0 : 29; /*!< [31:3] */ + } B; +} hw_i2s_tcr1_t; + +/*! + * @name Constants and macros for entire I2S_TCR1 register + */ +/*@{*/ +#define HW_I2S_TCR1_ADDR(x) ((x) + 0x4U) + +#define HW_I2S_TCR1(x) (*(__IO hw_i2s_tcr1_t *) HW_I2S_TCR1_ADDR(x)) +#define HW_I2S_TCR1_RD(x) (HW_I2S_TCR1(x).U) +#define HW_I2S_TCR1_WR(x, v) (HW_I2S_TCR1(x).U = (v)) +#define HW_I2S_TCR1_SET(x, v) (HW_I2S_TCR1_WR(x, HW_I2S_TCR1_RD(x) | (v))) +#define HW_I2S_TCR1_CLR(x, v) (HW_I2S_TCR1_WR(x, HW_I2S_TCR1_RD(x) & ~(v))) +#define HW_I2S_TCR1_TOG(x, v) (HW_I2S_TCR1_WR(x, HW_I2S_TCR1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCR1 bitfields + */ + +/*! + * @name Register I2S_TCR1, field TFW[2:0] (RW) + * + * Configures the watermark level for all enabled transmit channels. + */ +/*@{*/ +#define BP_I2S_TCR1_TFW (0U) /*!< Bit position for I2S_TCR1_TFW. */ +#define BM_I2S_TCR1_TFW (0x00000007U) /*!< Bit mask for I2S_TCR1_TFW. */ +#define BS_I2S_TCR1_TFW (3U) /*!< Bit field size in bits for I2S_TCR1_TFW. */ + +/*! @brief Read current value of the I2S_TCR1_TFW field. */ +#define BR_I2S_TCR1_TFW(x) (HW_I2S_TCR1(x).B.TFW) + +/*! @brief Format value for bitfield I2S_TCR1_TFW. */ +#define BF_I2S_TCR1_TFW(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR1_TFW) & BM_I2S_TCR1_TFW) + +/*! @brief Set the TFW field to a new value. */ +#define BW_I2S_TCR1_TFW(x, v) (HW_I2S_TCR1_WR(x, (HW_I2S_TCR1_RD(x) & ~BM_I2S_TCR1_TFW) | BF_I2S_TCR1_TFW(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TCR2 - SAI Transmit Configuration 2 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCR2 - SAI Transmit Configuration 2 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when TCSR[TE] is set. + */ +typedef union _hw_i2s_tcr2 +{ + uint32_t U; + struct _hw_i2s_tcr2_bitfields + { + uint32_t DIV : 8; /*!< [7:0] Bit Clock Divide */ + uint32_t RESERVED0 : 16; /*!< [23:8] */ + uint32_t BCD : 1; /*!< [24] Bit Clock Direction */ + uint32_t BCP : 1; /*!< [25] Bit Clock Polarity */ + uint32_t MSEL : 2; /*!< [27:26] MCLK Select */ + uint32_t BCI : 1; /*!< [28] Bit Clock Input */ + uint32_t BCS : 1; /*!< [29] Bit Clock Swap */ + uint32_t SYNC : 2; /*!< [31:30] Synchronous Mode */ + } B; +} hw_i2s_tcr2_t; + +/*! + * @name Constants and macros for entire I2S_TCR2 register + */ +/*@{*/ +#define HW_I2S_TCR2_ADDR(x) ((x) + 0x8U) + +#define HW_I2S_TCR2(x) (*(__IO hw_i2s_tcr2_t *) HW_I2S_TCR2_ADDR(x)) +#define HW_I2S_TCR2_RD(x) (HW_I2S_TCR2(x).U) +#define HW_I2S_TCR2_WR(x, v) (HW_I2S_TCR2(x).U = (v)) +#define HW_I2S_TCR2_SET(x, v) (HW_I2S_TCR2_WR(x, HW_I2S_TCR2_RD(x) | (v))) +#define HW_I2S_TCR2_CLR(x, v) (HW_I2S_TCR2_WR(x, HW_I2S_TCR2_RD(x) & ~(v))) +#define HW_I2S_TCR2_TOG(x, v) (HW_I2S_TCR2_WR(x, HW_I2S_TCR2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCR2 bitfields + */ + +/*! + * @name Register I2S_TCR2, field DIV[7:0] (RW) + * + * Divides down the audio master clock to generate the bit clock when configured + * for an internal bit clock. The division value is (DIV + 1) * 2. + */ +/*@{*/ +#define BP_I2S_TCR2_DIV (0U) /*!< Bit position for I2S_TCR2_DIV. */ +#define BM_I2S_TCR2_DIV (0x000000FFU) /*!< Bit mask for I2S_TCR2_DIV. */ +#define BS_I2S_TCR2_DIV (8U) /*!< Bit field size in bits for I2S_TCR2_DIV. */ + +/*! @brief Read current value of the I2S_TCR2_DIV field. */ +#define BR_I2S_TCR2_DIV(x) (HW_I2S_TCR2(x).B.DIV) + +/*! @brief Format value for bitfield I2S_TCR2_DIV. */ +#define BF_I2S_TCR2_DIV(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_DIV) & BM_I2S_TCR2_DIV) + +/*! @brief Set the DIV field to a new value. */ +#define BW_I2S_TCR2_DIV(x, v) (HW_I2S_TCR2_WR(x, (HW_I2S_TCR2_RD(x) & ~BM_I2S_TCR2_DIV) | BF_I2S_TCR2_DIV(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field BCD[24] (RW) + * + * Configures the direction of the bit clock. + * + * Values: + * - 0 - Bit clock is generated externally in Slave mode. + * - 1 - Bit clock is generated internally in Master mode. + */ +/*@{*/ +#define BP_I2S_TCR2_BCD (24U) /*!< Bit position for I2S_TCR2_BCD. */ +#define BM_I2S_TCR2_BCD (0x01000000U) /*!< Bit mask for I2S_TCR2_BCD. */ +#define BS_I2S_TCR2_BCD (1U) /*!< Bit field size in bits for I2S_TCR2_BCD. */ + +/*! @brief Read current value of the I2S_TCR2_BCD field. */ +#define BR_I2S_TCR2_BCD(x) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCD)) + +/*! @brief Format value for bitfield I2S_TCR2_BCD. */ +#define BF_I2S_TCR2_BCD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_BCD) & BM_I2S_TCR2_BCD) + +/*! @brief Set the BCD field to a new value. */ +#define BW_I2S_TCR2_BCD(x, v) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCD) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field BCP[25] (RW) + * + * Configures the polarity of the bit clock. + * + * Values: + * - 0 - Bit clock is active high with drive outputs on rising edge and sample + * inputs on falling edge. + * - 1 - Bit clock is active low with drive outputs on falling edge and sample + * inputs on rising edge. + */ +/*@{*/ +#define BP_I2S_TCR2_BCP (25U) /*!< Bit position for I2S_TCR2_BCP. */ +#define BM_I2S_TCR2_BCP (0x02000000U) /*!< Bit mask for I2S_TCR2_BCP. */ +#define BS_I2S_TCR2_BCP (1U) /*!< Bit field size in bits for I2S_TCR2_BCP. */ + +/*! @brief Read current value of the I2S_TCR2_BCP field. */ +#define BR_I2S_TCR2_BCP(x) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCP)) + +/*! @brief Format value for bitfield I2S_TCR2_BCP. */ +#define BF_I2S_TCR2_BCP(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_BCP) & BM_I2S_TCR2_BCP) + +/*! @brief Set the BCP field to a new value. */ +#define BW_I2S_TCR2_BCP(x, v) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCP) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field MSEL[27:26] (RW) + * + * Selects the audio Master Clock option used to generate an internally + * generated bit clock. This field has no effect when configured for an externally + * generated bit clock. Depending on the device, some Master Clock options might not be + * available. See the chip configuration details for the availability and + * chip-specific meaning of each option. + * + * Values: + * - 00 - Bus Clock selected. + * - 01 - Master Clock (MCLK) 1 option selected. + * - 10 - Master Clock (MCLK) 2 option selected. + * - 11 - Master Clock (MCLK) 3 option selected. + */ +/*@{*/ +#define BP_I2S_TCR2_MSEL (26U) /*!< Bit position for I2S_TCR2_MSEL. */ +#define BM_I2S_TCR2_MSEL (0x0C000000U) /*!< Bit mask for I2S_TCR2_MSEL. */ +#define BS_I2S_TCR2_MSEL (2U) /*!< Bit field size in bits for I2S_TCR2_MSEL. */ + +/*! @brief Read current value of the I2S_TCR2_MSEL field. */ +#define BR_I2S_TCR2_MSEL(x) (HW_I2S_TCR2(x).B.MSEL) + +/*! @brief Format value for bitfield I2S_TCR2_MSEL. */ +#define BF_I2S_TCR2_MSEL(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_MSEL) & BM_I2S_TCR2_MSEL) + +/*! @brief Set the MSEL field to a new value. */ +#define BW_I2S_TCR2_MSEL(x, v) (HW_I2S_TCR2_WR(x, (HW_I2S_TCR2_RD(x) & ~BM_I2S_TCR2_MSEL) | BF_I2S_TCR2_MSEL(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field BCI[28] (RW) + * + * When this field is set and using an internally generated bit clock in either + * synchronous or asynchronous mode, the bit clock actually used by the + * transmitter is delayed by the pad output delay (the transmitter is clocked by the pad + * input as if the clock was externally generated). This has the effect of + * decreasing the data input setup time, but increasing the data output valid time. The + * slave mode timing from the datasheet should be used for the transmitter when + * this bit is set. In synchronous mode, this bit allows the transmitter to use + * the slave mode timing from the datasheet, while the receiver uses the master + * mode timing. This field has no effect when configured for an externally generated + * bit clock . + * + * Values: + * - 0 - No effect. + * - 1 - Internal logic is clocked as if bit clock was externally generated. + */ +/*@{*/ +#define BP_I2S_TCR2_BCI (28U) /*!< Bit position for I2S_TCR2_BCI. */ +#define BM_I2S_TCR2_BCI (0x10000000U) /*!< Bit mask for I2S_TCR2_BCI. */ +#define BS_I2S_TCR2_BCI (1U) /*!< Bit field size in bits for I2S_TCR2_BCI. */ + +/*! @brief Read current value of the I2S_TCR2_BCI field. */ +#define BR_I2S_TCR2_BCI(x) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCI)) + +/*! @brief Format value for bitfield I2S_TCR2_BCI. */ +#define BF_I2S_TCR2_BCI(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_BCI) & BM_I2S_TCR2_BCI) + +/*! @brief Set the BCI field to a new value. */ +#define BW_I2S_TCR2_BCI(x, v) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCI) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field BCS[29] (RW) + * + * This field swaps the bit clock used by the transmitter. When the transmitter + * is configured in asynchronous mode and this bit is set, the transmitter is + * clocked by the receiver bit clock (SAI_RX_BCLK). This allows the transmitter and + * receiver to share the same bit clock, but the transmitter continues to use the + * transmit frame sync (SAI_TX_SYNC). When the transmitter is configured in + * synchronous mode, the transmitter BCS field and receiver BCS field must be set to + * the same value. When both are set, the transmitter and receiver are both + * clocked by the transmitter bit clock (SAI_TX_BCLK) but use the receiver frame sync + * (SAI_RX_SYNC). + * + * Values: + * - 0 - Use the normal bit clock source. + * - 1 - Swap the bit clock source. + */ +/*@{*/ +#define BP_I2S_TCR2_BCS (29U) /*!< Bit position for I2S_TCR2_BCS. */ +#define BM_I2S_TCR2_BCS (0x20000000U) /*!< Bit mask for I2S_TCR2_BCS. */ +#define BS_I2S_TCR2_BCS (1U) /*!< Bit field size in bits for I2S_TCR2_BCS. */ + +/*! @brief Read current value of the I2S_TCR2_BCS field. */ +#define BR_I2S_TCR2_BCS(x) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCS)) + +/*! @brief Format value for bitfield I2S_TCR2_BCS. */ +#define BF_I2S_TCR2_BCS(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_BCS) & BM_I2S_TCR2_BCS) + +/*! @brief Set the BCS field to a new value. */ +#define BW_I2S_TCR2_BCS(x, v) (BITBAND_ACCESS32(HW_I2S_TCR2_ADDR(x), BP_I2S_TCR2_BCS) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR2, field SYNC[31:30] (RW) + * + * Configures between asynchronous and synchronous modes of operation. When + * configured for a synchronous mode of operation, the receiver must be configured + * for asynchronous operation. + * + * Values: + * - 00 - Asynchronous mode. + * - 01 - Synchronous with receiver. + * - 10 - Synchronous with another SAI transmitter. + * - 11 - Synchronous with another SAI receiver. + */ +/*@{*/ +#define BP_I2S_TCR2_SYNC (30U) /*!< Bit position for I2S_TCR2_SYNC. */ +#define BM_I2S_TCR2_SYNC (0xC0000000U) /*!< Bit mask for I2S_TCR2_SYNC. */ +#define BS_I2S_TCR2_SYNC (2U) /*!< Bit field size in bits for I2S_TCR2_SYNC. */ + +/*! @brief Read current value of the I2S_TCR2_SYNC field. */ +#define BR_I2S_TCR2_SYNC(x) (HW_I2S_TCR2(x).B.SYNC) + +/*! @brief Format value for bitfield I2S_TCR2_SYNC. */ +#define BF_I2S_TCR2_SYNC(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR2_SYNC) & BM_I2S_TCR2_SYNC) + +/*! @brief Set the SYNC field to a new value. */ +#define BW_I2S_TCR2_SYNC(x, v) (HW_I2S_TCR2_WR(x, (HW_I2S_TCR2_RD(x) & ~BM_I2S_TCR2_SYNC) | BF_I2S_TCR2_SYNC(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TCR3 - SAI Transmit Configuration 3 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCR3 - SAI Transmit Configuration 3 Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_tcr3 +{ + uint32_t U; + struct _hw_i2s_tcr3_bitfields + { + uint32_t WDFL : 4; /*!< [3:0] Word Flag Configuration */ + uint32_t RESERVED0 : 12; /*!< [15:4] */ + uint32_t TCE : 1; /*!< [16] Transmit Channel Enable */ + uint32_t RESERVED1 : 15; /*!< [31:17] */ + } B; +} hw_i2s_tcr3_t; + +/*! + * @name Constants and macros for entire I2S_TCR3 register + */ +/*@{*/ +#define HW_I2S_TCR3_ADDR(x) ((x) + 0xCU) + +#define HW_I2S_TCR3(x) (*(__IO hw_i2s_tcr3_t *) HW_I2S_TCR3_ADDR(x)) +#define HW_I2S_TCR3_RD(x) (HW_I2S_TCR3(x).U) +#define HW_I2S_TCR3_WR(x, v) (HW_I2S_TCR3(x).U = (v)) +#define HW_I2S_TCR3_SET(x, v) (HW_I2S_TCR3_WR(x, HW_I2S_TCR3_RD(x) | (v))) +#define HW_I2S_TCR3_CLR(x, v) (HW_I2S_TCR3_WR(x, HW_I2S_TCR3_RD(x) & ~(v))) +#define HW_I2S_TCR3_TOG(x, v) (HW_I2S_TCR3_WR(x, HW_I2S_TCR3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCR3 bitfields + */ + +/*! + * @name Register I2S_TCR3, field WDFL[3:0] (RW) + * + * Configures which word sets the start of word flag. The value written must be + * one less than the word number. For example, writing 0 configures the first + * word in the frame. When configured to a value greater than TCR4[FRSZ], then the + * start of word flag is never set. + */ +/*@{*/ +#define BP_I2S_TCR3_WDFL (0U) /*!< Bit position for I2S_TCR3_WDFL. */ +#define BM_I2S_TCR3_WDFL (0x0000000FU) /*!< Bit mask for I2S_TCR3_WDFL. */ +#define BS_I2S_TCR3_WDFL (4U) /*!< Bit field size in bits for I2S_TCR3_WDFL. */ + +/*! @brief Read current value of the I2S_TCR3_WDFL field. */ +#define BR_I2S_TCR3_WDFL(x) (HW_I2S_TCR3(x).B.WDFL) + +/*! @brief Format value for bitfield I2S_TCR3_WDFL. */ +#define BF_I2S_TCR3_WDFL(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR3_WDFL) & BM_I2S_TCR3_WDFL) + +/*! @brief Set the WDFL field to a new value. */ +#define BW_I2S_TCR3_WDFL(x, v) (HW_I2S_TCR3_WR(x, (HW_I2S_TCR3_RD(x) & ~BM_I2S_TCR3_WDFL) | BF_I2S_TCR3_WDFL(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR3, field TCE[16] (RW) + * + * Enables the corresponding data channel for transmit operation. A channel must + * be enabled before its FIFO is accessed. Changing this field will take effect + * immediately for generating the FIFO request and warning flags, but at the end + * of each frame for transmit operation. + * + * Values: + * - 0 - Transmit data channel N is disabled. + * - 1 - Transmit data channel N is enabled. + */ +/*@{*/ +#define BP_I2S_TCR3_TCE (16U) /*!< Bit position for I2S_TCR3_TCE. */ +#define BM_I2S_TCR3_TCE (0x00010000U) /*!< Bit mask for I2S_TCR3_TCE. */ +#define BS_I2S_TCR3_TCE (1U) /*!< Bit field size in bits for I2S_TCR3_TCE. */ + +/*! @brief Read current value of the I2S_TCR3_TCE field. */ +#define BR_I2S_TCR3_TCE(x) (BITBAND_ACCESS32(HW_I2S_TCR3_ADDR(x), BP_I2S_TCR3_TCE)) + +/*! @brief Format value for bitfield I2S_TCR3_TCE. */ +#define BF_I2S_TCR3_TCE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR3_TCE) & BM_I2S_TCR3_TCE) + +/*! @brief Set the TCE field to a new value. */ +#define BW_I2S_TCR3_TCE(x, v) (BITBAND_ACCESS32(HW_I2S_TCR3_ADDR(x), BP_I2S_TCR3_TCE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TCR4 - SAI Transmit Configuration 4 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCR4 - SAI Transmit Configuration 4 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when TCSR[TE] is set. + */ +typedef union _hw_i2s_tcr4 +{ + uint32_t U; + struct _hw_i2s_tcr4_bitfields + { + uint32_t FSD : 1; /*!< [0] Frame Sync Direction */ + uint32_t FSP : 1; /*!< [1] Frame Sync Polarity */ + uint32_t ONDEM : 1; /*!< [2] On Demand Mode */ + uint32_t FSE : 1; /*!< [3] Frame Sync Early */ + uint32_t MF : 1; /*!< [4] MSB First */ + uint32_t RESERVED0 : 3; /*!< [7:5] */ + uint32_t SYWD : 5; /*!< [12:8] Sync Width */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t FRSZ : 4; /*!< [19:16] Frame size */ + uint32_t RESERVED2 : 4; /*!< [23:20] */ + uint32_t FPACK : 2; /*!< [25:24] FIFO Packing Mode */ + uint32_t RESERVED3 : 2; /*!< [27:26] */ + uint32_t FCONT : 1; /*!< [28] FIFO Continue on Error */ + uint32_t RESERVED4 : 3; /*!< [31:29] */ + } B; +} hw_i2s_tcr4_t; + +/*! + * @name Constants and macros for entire I2S_TCR4 register + */ +/*@{*/ +#define HW_I2S_TCR4_ADDR(x) ((x) + 0x10U) + +#define HW_I2S_TCR4(x) (*(__IO hw_i2s_tcr4_t *) HW_I2S_TCR4_ADDR(x)) +#define HW_I2S_TCR4_RD(x) (HW_I2S_TCR4(x).U) +#define HW_I2S_TCR4_WR(x, v) (HW_I2S_TCR4(x).U = (v)) +#define HW_I2S_TCR4_SET(x, v) (HW_I2S_TCR4_WR(x, HW_I2S_TCR4_RD(x) | (v))) +#define HW_I2S_TCR4_CLR(x, v) (HW_I2S_TCR4_WR(x, HW_I2S_TCR4_RD(x) & ~(v))) +#define HW_I2S_TCR4_TOG(x, v) (HW_I2S_TCR4_WR(x, HW_I2S_TCR4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCR4 bitfields + */ + +/*! + * @name Register I2S_TCR4, field FSD[0] (RW) + * + * Configures the direction of the frame sync. + * + * Values: + * - 0 - Frame sync is generated externally in Slave mode. + * - 1 - Frame sync is generated internally in Master mode. + */ +/*@{*/ +#define BP_I2S_TCR4_FSD (0U) /*!< Bit position for I2S_TCR4_FSD. */ +#define BM_I2S_TCR4_FSD (0x00000001U) /*!< Bit mask for I2S_TCR4_FSD. */ +#define BS_I2S_TCR4_FSD (1U) /*!< Bit field size in bits for I2S_TCR4_FSD. */ + +/*! @brief Read current value of the I2S_TCR4_FSD field. */ +#define BR_I2S_TCR4_FSD(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSD)) + +/*! @brief Format value for bitfield I2S_TCR4_FSD. */ +#define BF_I2S_TCR4_FSD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FSD) & BM_I2S_TCR4_FSD) + +/*! @brief Set the FSD field to a new value. */ +#define BW_I2S_TCR4_FSD(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSD) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field FSP[1] (RW) + * + * Configures the polarity of the frame sync. + * + * Values: + * - 0 - Frame sync is active high. + * - 1 - Frame sync is active low. + */ +/*@{*/ +#define BP_I2S_TCR4_FSP (1U) /*!< Bit position for I2S_TCR4_FSP. */ +#define BM_I2S_TCR4_FSP (0x00000002U) /*!< Bit mask for I2S_TCR4_FSP. */ +#define BS_I2S_TCR4_FSP (1U) /*!< Bit field size in bits for I2S_TCR4_FSP. */ + +/*! @brief Read current value of the I2S_TCR4_FSP field. */ +#define BR_I2S_TCR4_FSP(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSP)) + +/*! @brief Format value for bitfield I2S_TCR4_FSP. */ +#define BF_I2S_TCR4_FSP(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FSP) & BM_I2S_TCR4_FSP) + +/*! @brief Set the FSP field to a new value. */ +#define BW_I2S_TCR4_FSP(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSP) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field ONDEM[2] (RW) + * + * When set, and the frame sync is generated internally, a frame sync is only + * generated when the FIFO warning flag is clear. + * + * Values: + * - 0 - Internal frame sync is generated continuously. + * - 1 - Internal frame sync is generated when the FIFO warning flag is clear. + */ +/*@{*/ +#define BP_I2S_TCR4_ONDEM (2U) /*!< Bit position for I2S_TCR4_ONDEM. */ +#define BM_I2S_TCR4_ONDEM (0x00000004U) /*!< Bit mask for I2S_TCR4_ONDEM. */ +#define BS_I2S_TCR4_ONDEM (1U) /*!< Bit field size in bits for I2S_TCR4_ONDEM. */ + +/*! @brief Read current value of the I2S_TCR4_ONDEM field. */ +#define BR_I2S_TCR4_ONDEM(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_ONDEM)) + +/*! @brief Format value for bitfield I2S_TCR4_ONDEM. */ +#define BF_I2S_TCR4_ONDEM(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_ONDEM) & BM_I2S_TCR4_ONDEM) + +/*! @brief Set the ONDEM field to a new value. */ +#define BW_I2S_TCR4_ONDEM(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_ONDEM) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field FSE[3] (RW) + * + * Values: + * - 0 - Frame sync asserts with the first bit of the frame. + * - 1 - Frame sync asserts one bit before the first bit of the frame. + */ +/*@{*/ +#define BP_I2S_TCR4_FSE (3U) /*!< Bit position for I2S_TCR4_FSE. */ +#define BM_I2S_TCR4_FSE (0x00000008U) /*!< Bit mask for I2S_TCR4_FSE. */ +#define BS_I2S_TCR4_FSE (1U) /*!< Bit field size in bits for I2S_TCR4_FSE. */ + +/*! @brief Read current value of the I2S_TCR4_FSE field. */ +#define BR_I2S_TCR4_FSE(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSE)) + +/*! @brief Format value for bitfield I2S_TCR4_FSE. */ +#define BF_I2S_TCR4_FSE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FSE) & BM_I2S_TCR4_FSE) + +/*! @brief Set the FSE field to a new value. */ +#define BW_I2S_TCR4_FSE(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FSE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field MF[4] (RW) + * + * Configures whether the LSB or the MSB is transmitted first. + * + * Values: + * - 0 - LSB is transmitted first. + * - 1 - MSB is transmitted first. + */ +/*@{*/ +#define BP_I2S_TCR4_MF (4U) /*!< Bit position for I2S_TCR4_MF. */ +#define BM_I2S_TCR4_MF (0x00000010U) /*!< Bit mask for I2S_TCR4_MF. */ +#define BS_I2S_TCR4_MF (1U) /*!< Bit field size in bits for I2S_TCR4_MF. */ + +/*! @brief Read current value of the I2S_TCR4_MF field. */ +#define BR_I2S_TCR4_MF(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_MF)) + +/*! @brief Format value for bitfield I2S_TCR4_MF. */ +#define BF_I2S_TCR4_MF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_MF) & BM_I2S_TCR4_MF) + +/*! @brief Set the MF field to a new value. */ +#define BW_I2S_TCR4_MF(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_MF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field SYWD[12:8] (RW) + * + * Configures the length of the frame sync in number of bit clocks. The value + * written must be one less than the number of bit clocks. For example, write 0 for + * the frame sync to assert for one bit clock only. The sync width cannot be + * configured longer than the first word of the frame. + */ +/*@{*/ +#define BP_I2S_TCR4_SYWD (8U) /*!< Bit position for I2S_TCR4_SYWD. */ +#define BM_I2S_TCR4_SYWD (0x00001F00U) /*!< Bit mask for I2S_TCR4_SYWD. */ +#define BS_I2S_TCR4_SYWD (5U) /*!< Bit field size in bits for I2S_TCR4_SYWD. */ + +/*! @brief Read current value of the I2S_TCR4_SYWD field. */ +#define BR_I2S_TCR4_SYWD(x) (HW_I2S_TCR4(x).B.SYWD) + +/*! @brief Format value for bitfield I2S_TCR4_SYWD. */ +#define BF_I2S_TCR4_SYWD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_SYWD) & BM_I2S_TCR4_SYWD) + +/*! @brief Set the SYWD field to a new value. */ +#define BW_I2S_TCR4_SYWD(x, v) (HW_I2S_TCR4_WR(x, (HW_I2S_TCR4_RD(x) & ~BM_I2S_TCR4_SYWD) | BF_I2S_TCR4_SYWD(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field FRSZ[19:16] (RW) + * + * Configures the number of words in each frame. The value written must be one + * less than the number of words in the frame. For example, write 0 for one word + * per frame. The maximum supported frame size is 16 words. + */ +/*@{*/ +#define BP_I2S_TCR4_FRSZ (16U) /*!< Bit position for I2S_TCR4_FRSZ. */ +#define BM_I2S_TCR4_FRSZ (0x000F0000U) /*!< Bit mask for I2S_TCR4_FRSZ. */ +#define BS_I2S_TCR4_FRSZ (4U) /*!< Bit field size in bits for I2S_TCR4_FRSZ. */ + +/*! @brief Read current value of the I2S_TCR4_FRSZ field. */ +#define BR_I2S_TCR4_FRSZ(x) (HW_I2S_TCR4(x).B.FRSZ) + +/*! @brief Format value for bitfield I2S_TCR4_FRSZ. */ +#define BF_I2S_TCR4_FRSZ(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FRSZ) & BM_I2S_TCR4_FRSZ) + +/*! @brief Set the FRSZ field to a new value. */ +#define BW_I2S_TCR4_FRSZ(x, v) (HW_I2S_TCR4_WR(x, (HW_I2S_TCR4_RD(x) & ~BM_I2S_TCR4_FRSZ) | BF_I2S_TCR4_FRSZ(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field FPACK[25:24] (RW) + * + * Enables packing of 8-bit data or 16-bit data into each 32-bit FIFO word. If + * the word size is greater than 8-bit or 16-bit then only the first 8-bit or + * 16-bits are loaded from the FIFO. The first word in each frame always starts with + * a new 32-bit FIFO word and the first bit shifted must be configured within the + * first packed word. When FIFO packing is enabled, the FIFO write pointer will + * only increment when the full 32-bit FIFO word has been written by software. + * + * Values: + * - 00 - FIFO packing is disabled + * - 01 - Reserved + * - 10 - 8-bit FIFO packing is enabled + * - 11 - 16-bit FIFO packing is enabled + */ +/*@{*/ +#define BP_I2S_TCR4_FPACK (24U) /*!< Bit position for I2S_TCR4_FPACK. */ +#define BM_I2S_TCR4_FPACK (0x03000000U) /*!< Bit mask for I2S_TCR4_FPACK. */ +#define BS_I2S_TCR4_FPACK (2U) /*!< Bit field size in bits for I2S_TCR4_FPACK. */ + +/*! @brief Read current value of the I2S_TCR4_FPACK field. */ +#define BR_I2S_TCR4_FPACK(x) (HW_I2S_TCR4(x).B.FPACK) + +/*! @brief Format value for bitfield I2S_TCR4_FPACK. */ +#define BF_I2S_TCR4_FPACK(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FPACK) & BM_I2S_TCR4_FPACK) + +/*! @brief Set the FPACK field to a new value. */ +#define BW_I2S_TCR4_FPACK(x, v) (HW_I2S_TCR4_WR(x, (HW_I2S_TCR4_RD(x) & ~BM_I2S_TCR4_FPACK) | BF_I2S_TCR4_FPACK(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR4, field FCONT[28] (RW) + * + * Configures when the SAI will continue transmitting after a FIFO error has + * been detected. + * + * Values: + * - 0 - On FIFO error, the SAI will continue from the start of the next frame + * after the FIFO error flag has been cleared. + * - 1 - On FIFO error, the SAI will continue from the same word that caused the + * FIFO error to set after the FIFO warning flag has been cleared. + */ +/*@{*/ +#define BP_I2S_TCR4_FCONT (28U) /*!< Bit position for I2S_TCR4_FCONT. */ +#define BM_I2S_TCR4_FCONT (0x10000000U) /*!< Bit mask for I2S_TCR4_FCONT. */ +#define BS_I2S_TCR4_FCONT (1U) /*!< Bit field size in bits for I2S_TCR4_FCONT. */ + +/*! @brief Read current value of the I2S_TCR4_FCONT field. */ +#define BR_I2S_TCR4_FCONT(x) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FCONT)) + +/*! @brief Format value for bitfield I2S_TCR4_FCONT. */ +#define BF_I2S_TCR4_FCONT(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR4_FCONT) & BM_I2S_TCR4_FCONT) + +/*! @brief Set the FCONT field to a new value. */ +#define BW_I2S_TCR4_FCONT(x, v) (BITBAND_ACCESS32(HW_I2S_TCR4_ADDR(x), BP_I2S_TCR4_FCONT) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TCR5 - SAI Transmit Configuration 5 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TCR5 - SAI Transmit Configuration 5 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when TCSR[TE] is set. + */ +typedef union _hw_i2s_tcr5 +{ + uint32_t U; + struct _hw_i2s_tcr5_bitfields + { + uint32_t RESERVED0 : 8; /*!< [7:0] */ + uint32_t FBT : 5; /*!< [12:8] First Bit Shifted */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t W0W : 5; /*!< [20:16] Word 0 Width */ + uint32_t RESERVED2 : 3; /*!< [23:21] */ + uint32_t WNW : 5; /*!< [28:24] Word N Width */ + uint32_t RESERVED3 : 3; /*!< [31:29] */ + } B; +} hw_i2s_tcr5_t; + +/*! + * @name Constants and macros for entire I2S_TCR5 register + */ +/*@{*/ +#define HW_I2S_TCR5_ADDR(x) ((x) + 0x14U) + +#define HW_I2S_TCR5(x) (*(__IO hw_i2s_tcr5_t *) HW_I2S_TCR5_ADDR(x)) +#define HW_I2S_TCR5_RD(x) (HW_I2S_TCR5(x).U) +#define HW_I2S_TCR5_WR(x, v) (HW_I2S_TCR5(x).U = (v)) +#define HW_I2S_TCR5_SET(x, v) (HW_I2S_TCR5_WR(x, HW_I2S_TCR5_RD(x) | (v))) +#define HW_I2S_TCR5_CLR(x, v) (HW_I2S_TCR5_WR(x, HW_I2S_TCR5_RD(x) & ~(v))) +#define HW_I2S_TCR5_TOG(x, v) (HW_I2S_TCR5_WR(x, HW_I2S_TCR5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TCR5 bitfields + */ + +/*! + * @name Register I2S_TCR5, field FBT[12:8] (RW) + * + * Configures the bit index for the first bit transmitted for each word in the + * frame. If configured for MSB First, the index of the next bit transmitted is + * one less than the current bit transmitted. If configured for LSB First, the + * index of the next bit transmitted is one more than the current bit transmitted. + * The value written must be greater than or equal to the word width when + * configured for MSB First. The value written must be less than or equal to 31-word width + * when configured for LSB First. + */ +/*@{*/ +#define BP_I2S_TCR5_FBT (8U) /*!< Bit position for I2S_TCR5_FBT. */ +#define BM_I2S_TCR5_FBT (0x00001F00U) /*!< Bit mask for I2S_TCR5_FBT. */ +#define BS_I2S_TCR5_FBT (5U) /*!< Bit field size in bits for I2S_TCR5_FBT. */ + +/*! @brief Read current value of the I2S_TCR5_FBT field. */ +#define BR_I2S_TCR5_FBT(x) (HW_I2S_TCR5(x).B.FBT) + +/*! @brief Format value for bitfield I2S_TCR5_FBT. */ +#define BF_I2S_TCR5_FBT(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR5_FBT) & BM_I2S_TCR5_FBT) + +/*! @brief Set the FBT field to a new value. */ +#define BW_I2S_TCR5_FBT(x, v) (HW_I2S_TCR5_WR(x, (HW_I2S_TCR5_RD(x) & ~BM_I2S_TCR5_FBT) | BF_I2S_TCR5_FBT(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR5, field W0W[20:16] (RW) + * + * Configures the number of bits in the first word in each frame. The value + * written must be one less than the number of bits in the first word. Word width of + * less than 8 bits is not supported if there is only one word per frame. + */ +/*@{*/ +#define BP_I2S_TCR5_W0W (16U) /*!< Bit position for I2S_TCR5_W0W. */ +#define BM_I2S_TCR5_W0W (0x001F0000U) /*!< Bit mask for I2S_TCR5_W0W. */ +#define BS_I2S_TCR5_W0W (5U) /*!< Bit field size in bits for I2S_TCR5_W0W. */ + +/*! @brief Read current value of the I2S_TCR5_W0W field. */ +#define BR_I2S_TCR5_W0W(x) (HW_I2S_TCR5(x).B.W0W) + +/*! @brief Format value for bitfield I2S_TCR5_W0W. */ +#define BF_I2S_TCR5_W0W(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR5_W0W) & BM_I2S_TCR5_W0W) + +/*! @brief Set the W0W field to a new value. */ +#define BW_I2S_TCR5_W0W(x, v) (HW_I2S_TCR5_WR(x, (HW_I2S_TCR5_RD(x) & ~BM_I2S_TCR5_W0W) | BF_I2S_TCR5_W0W(v))) +/*@}*/ + +/*! + * @name Register I2S_TCR5, field WNW[28:24] (RW) + * + * Configures the number of bits in each word, for each word except the first in + * the frame. The value written must be one less than the number of bits per + * word. Word width of less than 8 bits is not supported. + */ +/*@{*/ +#define BP_I2S_TCR5_WNW (24U) /*!< Bit position for I2S_TCR5_WNW. */ +#define BM_I2S_TCR5_WNW (0x1F000000U) /*!< Bit mask for I2S_TCR5_WNW. */ +#define BS_I2S_TCR5_WNW (5U) /*!< Bit field size in bits for I2S_TCR5_WNW. */ + +/*! @brief Read current value of the I2S_TCR5_WNW field. */ +#define BR_I2S_TCR5_WNW(x) (HW_I2S_TCR5(x).B.WNW) + +/*! @brief Format value for bitfield I2S_TCR5_WNW. */ +#define BF_I2S_TCR5_WNW(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TCR5_WNW) & BM_I2S_TCR5_WNW) + +/*! @brief Set the WNW field to a new value. */ +#define BW_I2S_TCR5_WNW(x, v) (HW_I2S_TCR5_WR(x, (HW_I2S_TCR5_RD(x) & ~BM_I2S_TCR5_WNW) | BF_I2S_TCR5_WNW(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TDRn - SAI Transmit Data Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TDRn - SAI Transmit Data Register (WORZ) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_tdrn +{ + uint32_t U; + struct _hw_i2s_tdrn_bitfields + { + uint32_t TDR : 32; /*!< [31:0] Transmit Data Register */ + } B; +} hw_i2s_tdrn_t; + +/*! + * @name Constants and macros for entire I2S_TDRn register + */ +/*@{*/ +#define HW_I2S_TDRn_COUNT (1U) + +#define HW_I2S_TDRn_ADDR(x, n) ((x) + 0x20U + (0x4U * (n))) + +#define HW_I2S_TDRn(x, n) (*(__O hw_i2s_tdrn_t *) HW_I2S_TDRn_ADDR(x, n)) +#define HW_I2S_TDRn_RD(x, n) (HW_I2S_TDRn(x, n).U) +#define HW_I2S_TDRn_WR(x, n, v) (HW_I2S_TDRn(x, n).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual I2S_TDRn bitfields + */ + +/*! + * @name Register I2S_TDRn, field TDR[31:0] (WORZ) + * + * The corresponding TCR3[TCE] bit must be set before accessing the channel's + * transmit data register. Writes to this register when the transmit FIFO is not + * full will push the data written into the transmit data FIFO. Writes to this + * register when the transmit FIFO is full are ignored. + */ +/*@{*/ +#define BP_I2S_TDRn_TDR (0U) /*!< Bit position for I2S_TDRn_TDR. */ +#define BM_I2S_TDRn_TDR (0xFFFFFFFFU) /*!< Bit mask for I2S_TDRn_TDR. */ +#define BS_I2S_TDRn_TDR (32U) /*!< Bit field size in bits for I2S_TDRn_TDR. */ + +/*! @brief Format value for bitfield I2S_TDRn_TDR. */ +#define BF_I2S_TDRn_TDR(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TDRn_TDR) & BM_I2S_TDRn_TDR) + +/*! @brief Set the TDR field to a new value. */ +#define BW_I2S_TDRn_TDR(x, n, v) (HW_I2S_TDRn_WR(x, n, v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TFRn - SAI Transmit FIFO Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TFRn - SAI Transmit FIFO Register (RO) + * + * Reset value: 0x00000000U + * + * The MSB of the read and write pointers is used to distinguish between FIFO + * full and empty conditions. If the read and write pointers are identical, then + * the FIFO is empty. If the read and write pointers are identical except for the + * MSB, then the FIFO is full. + */ +typedef union _hw_i2s_tfrn +{ + uint32_t U; + struct _hw_i2s_tfrn_bitfields + { + uint32_t RFP : 4; /*!< [3:0] Read FIFO Pointer */ + uint32_t RESERVED0 : 12; /*!< [15:4] */ + uint32_t WFP : 4; /*!< [19:16] Write FIFO Pointer */ + uint32_t RESERVED1 : 12; /*!< [31:20] */ + } B; +} hw_i2s_tfrn_t; + +/*! + * @name Constants and macros for entire I2S_TFRn register + */ +/*@{*/ +#define HW_I2S_TFRn_COUNT (1U) + +#define HW_I2S_TFRn_ADDR(x, n) ((x) + 0x40U + (0x4U * (n))) + +#define HW_I2S_TFRn(x, n) (*(__I hw_i2s_tfrn_t *) HW_I2S_TFRn_ADDR(x, n)) +#define HW_I2S_TFRn_RD(x, n) (HW_I2S_TFRn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual I2S_TFRn bitfields + */ + +/*! + * @name Register I2S_TFRn, field RFP[3:0] (RO) + * + * FIFO read pointer for transmit data channel. + */ +/*@{*/ +#define BP_I2S_TFRn_RFP (0U) /*!< Bit position for I2S_TFRn_RFP. */ +#define BM_I2S_TFRn_RFP (0x0000000FU) /*!< Bit mask for I2S_TFRn_RFP. */ +#define BS_I2S_TFRn_RFP (4U) /*!< Bit field size in bits for I2S_TFRn_RFP. */ + +/*! @brief Read current value of the I2S_TFRn_RFP field. */ +#define BR_I2S_TFRn_RFP(x, n) (HW_I2S_TFRn(x, n).B.RFP) +/*@}*/ + +/*! + * @name Register I2S_TFRn, field WFP[19:16] (RO) + * + * FIFO write pointer for transmit data channel. + */ +/*@{*/ +#define BP_I2S_TFRn_WFP (16U) /*!< Bit position for I2S_TFRn_WFP. */ +#define BM_I2S_TFRn_WFP (0x000F0000U) /*!< Bit mask for I2S_TFRn_WFP. */ +#define BS_I2S_TFRn_WFP (4U) /*!< Bit field size in bits for I2S_TFRn_WFP. */ + +/*! @brief Read current value of the I2S_TFRn_WFP field. */ +#define BR_I2S_TFRn_WFP(x, n) (HW_I2S_TFRn(x, n).B.WFP) +/*@}*/ + +/******************************************************************************* + * HW_I2S_TMR - SAI Transmit Mask Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_TMR - SAI Transmit Mask Register (RW) + * + * Reset value: 0x00000000U + * + * This register is double-buffered and updates: When TCSR[TE] is first set At + * the end of each frame. This allows the masked words in each frame to change + * from frame to frame. + */ +typedef union _hw_i2s_tmr +{ + uint32_t U; + struct _hw_i2s_tmr_bitfields + { + uint32_t TWM : 16; /*!< [15:0] Transmit Word Mask */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_i2s_tmr_t; + +/*! + * @name Constants and macros for entire I2S_TMR register + */ +/*@{*/ +#define HW_I2S_TMR_ADDR(x) ((x) + 0x60U) + +#define HW_I2S_TMR(x) (*(__IO hw_i2s_tmr_t *) HW_I2S_TMR_ADDR(x)) +#define HW_I2S_TMR_RD(x) (HW_I2S_TMR(x).U) +#define HW_I2S_TMR_WR(x, v) (HW_I2S_TMR(x).U = (v)) +#define HW_I2S_TMR_SET(x, v) (HW_I2S_TMR_WR(x, HW_I2S_TMR_RD(x) | (v))) +#define HW_I2S_TMR_CLR(x, v) (HW_I2S_TMR_WR(x, HW_I2S_TMR_RD(x) & ~(v))) +#define HW_I2S_TMR_TOG(x, v) (HW_I2S_TMR_WR(x, HW_I2S_TMR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_TMR bitfields + */ + +/*! + * @name Register I2S_TMR, field TWM[15:0] (RW) + * + * Configures whether the transmit word is masked (transmit data pin tristated + * and transmit data not read from FIFO) for the corresponding word in the frame. + * + * Values: + * - 0 - Word N is enabled. + * - 1 - Word N is masked. The transmit data pins are tri-stated when masked. + */ +/*@{*/ +#define BP_I2S_TMR_TWM (0U) /*!< Bit position for I2S_TMR_TWM. */ +#define BM_I2S_TMR_TWM (0x0000FFFFU) /*!< Bit mask for I2S_TMR_TWM. */ +#define BS_I2S_TMR_TWM (16U) /*!< Bit field size in bits for I2S_TMR_TWM. */ + +/*! @brief Read current value of the I2S_TMR_TWM field. */ +#define BR_I2S_TMR_TWM(x) (HW_I2S_TMR(x).B.TWM) + +/*! @brief Format value for bitfield I2S_TMR_TWM. */ +#define BF_I2S_TMR_TWM(v) ((uint32_t)((uint32_t)(v) << BP_I2S_TMR_TWM) & BM_I2S_TMR_TWM) + +/*! @brief Set the TWM field to a new value. */ +#define BW_I2S_TMR_TWM(x, v) (HW_I2S_TMR_WR(x, (HW_I2S_TMR_RD(x) & ~BM_I2S_TMR_TWM) | BF_I2S_TMR_TWM(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCSR - SAI Receive Control Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCSR - SAI Receive Control Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_rcsr +{ + uint32_t U; + struct _hw_i2s_rcsr_bitfields + { + uint32_t FRDE : 1; /*!< [0] FIFO Request DMA Enable */ + uint32_t FWDE : 1; /*!< [1] FIFO Warning DMA Enable */ + uint32_t RESERVED0 : 6; /*!< [7:2] */ + uint32_t FRIE : 1; /*!< [8] FIFO Request Interrupt Enable */ + uint32_t FWIE : 1; /*!< [9] FIFO Warning Interrupt Enable */ + uint32_t FEIE : 1; /*!< [10] FIFO Error Interrupt Enable */ + uint32_t SEIE : 1; /*!< [11] Sync Error Interrupt Enable */ + uint32_t WSIE : 1; /*!< [12] Word Start Interrupt Enable */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t FRF : 1; /*!< [16] FIFO Request Flag */ + uint32_t FWF : 1; /*!< [17] FIFO Warning Flag */ + uint32_t FEF : 1; /*!< [18] FIFO Error Flag */ + uint32_t SEF : 1; /*!< [19] Sync Error Flag */ + uint32_t WSF : 1; /*!< [20] Word Start Flag */ + uint32_t RESERVED2 : 3; /*!< [23:21] */ + uint32_t SR : 1; /*!< [24] Software Reset */ + uint32_t FR : 1; /*!< [25] FIFO Reset */ + uint32_t RESERVED3 : 2; /*!< [27:26] */ + uint32_t BCE : 1; /*!< [28] Bit Clock Enable */ + uint32_t DBGE : 1; /*!< [29] Debug Enable */ + uint32_t STOPE : 1; /*!< [30] Stop Enable */ + uint32_t RE : 1; /*!< [31] Receiver Enable */ + } B; +} hw_i2s_rcsr_t; + +/*! + * @name Constants and macros for entire I2S_RCSR register + */ +/*@{*/ +#define HW_I2S_RCSR_ADDR(x) ((x) + 0x80U) + +#define HW_I2S_RCSR(x) (*(__IO hw_i2s_rcsr_t *) HW_I2S_RCSR_ADDR(x)) +#define HW_I2S_RCSR_RD(x) (HW_I2S_RCSR(x).U) +#define HW_I2S_RCSR_WR(x, v) (HW_I2S_RCSR(x).U = (v)) +#define HW_I2S_RCSR_SET(x, v) (HW_I2S_RCSR_WR(x, HW_I2S_RCSR_RD(x) | (v))) +#define HW_I2S_RCSR_CLR(x, v) (HW_I2S_RCSR_WR(x, HW_I2S_RCSR_RD(x) & ~(v))) +#define HW_I2S_RCSR_TOG(x, v) (HW_I2S_RCSR_WR(x, HW_I2S_RCSR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCSR bitfields + */ + +/*! + * @name Register I2S_RCSR, field FRDE[0] (RW) + * + * Enables/disables DMA requests. + * + * Values: + * - 0 - Disables the DMA request. + * - 1 - Enables the DMA request. + */ +/*@{*/ +#define BP_I2S_RCSR_FRDE (0U) /*!< Bit position for I2S_RCSR_FRDE. */ +#define BM_I2S_RCSR_FRDE (0x00000001U) /*!< Bit mask for I2S_RCSR_FRDE. */ +#define BS_I2S_RCSR_FRDE (1U) /*!< Bit field size in bits for I2S_RCSR_FRDE. */ + +/*! @brief Read current value of the I2S_RCSR_FRDE field. */ +#define BR_I2S_RCSR_FRDE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FRDE)) + +/*! @brief Format value for bitfield I2S_RCSR_FRDE. */ +#define BF_I2S_RCSR_FRDE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FRDE) & BM_I2S_RCSR_FRDE) + +/*! @brief Set the FRDE field to a new value. */ +#define BW_I2S_RCSR_FRDE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FRDE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FWDE[1] (RW) + * + * Enables/disables DMA requests. + * + * Values: + * - 0 - Disables the DMA request. + * - 1 - Enables the DMA request. + */ +/*@{*/ +#define BP_I2S_RCSR_FWDE (1U) /*!< Bit position for I2S_RCSR_FWDE. */ +#define BM_I2S_RCSR_FWDE (0x00000002U) /*!< Bit mask for I2S_RCSR_FWDE. */ +#define BS_I2S_RCSR_FWDE (1U) /*!< Bit field size in bits for I2S_RCSR_FWDE. */ + +/*! @brief Read current value of the I2S_RCSR_FWDE field. */ +#define BR_I2S_RCSR_FWDE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FWDE)) + +/*! @brief Format value for bitfield I2S_RCSR_FWDE. */ +#define BF_I2S_RCSR_FWDE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FWDE) & BM_I2S_RCSR_FWDE) + +/*! @brief Set the FWDE field to a new value. */ +#define BW_I2S_RCSR_FWDE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FWDE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FRIE[8] (RW) + * + * Enables/disables FIFO request interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_RCSR_FRIE (8U) /*!< Bit position for I2S_RCSR_FRIE. */ +#define BM_I2S_RCSR_FRIE (0x00000100U) /*!< Bit mask for I2S_RCSR_FRIE. */ +#define BS_I2S_RCSR_FRIE (1U) /*!< Bit field size in bits for I2S_RCSR_FRIE. */ + +/*! @brief Read current value of the I2S_RCSR_FRIE field. */ +#define BR_I2S_RCSR_FRIE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FRIE)) + +/*! @brief Format value for bitfield I2S_RCSR_FRIE. */ +#define BF_I2S_RCSR_FRIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FRIE) & BM_I2S_RCSR_FRIE) + +/*! @brief Set the FRIE field to a new value. */ +#define BW_I2S_RCSR_FRIE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FRIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FWIE[9] (RW) + * + * Enables/disables FIFO warning interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_RCSR_FWIE (9U) /*!< Bit position for I2S_RCSR_FWIE. */ +#define BM_I2S_RCSR_FWIE (0x00000200U) /*!< Bit mask for I2S_RCSR_FWIE. */ +#define BS_I2S_RCSR_FWIE (1U) /*!< Bit field size in bits for I2S_RCSR_FWIE. */ + +/*! @brief Read current value of the I2S_RCSR_FWIE field. */ +#define BR_I2S_RCSR_FWIE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FWIE)) + +/*! @brief Format value for bitfield I2S_RCSR_FWIE. */ +#define BF_I2S_RCSR_FWIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FWIE) & BM_I2S_RCSR_FWIE) + +/*! @brief Set the FWIE field to a new value. */ +#define BW_I2S_RCSR_FWIE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FWIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FEIE[10] (RW) + * + * Enables/disables FIFO error interrupts. + * + * Values: + * - 0 - Disables the interrupt. + * - 1 - Enables the interrupt. + */ +/*@{*/ +#define BP_I2S_RCSR_FEIE (10U) /*!< Bit position for I2S_RCSR_FEIE. */ +#define BM_I2S_RCSR_FEIE (0x00000400U) /*!< Bit mask for I2S_RCSR_FEIE. */ +#define BS_I2S_RCSR_FEIE (1U) /*!< Bit field size in bits for I2S_RCSR_FEIE. */ + +/*! @brief Read current value of the I2S_RCSR_FEIE field. */ +#define BR_I2S_RCSR_FEIE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FEIE)) + +/*! @brief Format value for bitfield I2S_RCSR_FEIE. */ +#define BF_I2S_RCSR_FEIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FEIE) & BM_I2S_RCSR_FEIE) + +/*! @brief Set the FEIE field to a new value. */ +#define BW_I2S_RCSR_FEIE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FEIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field SEIE[11] (RW) + * + * Enables/disables sync error interrupts. + * + * Values: + * - 0 - Disables interrupt. + * - 1 - Enables interrupt. + */ +/*@{*/ +#define BP_I2S_RCSR_SEIE (11U) /*!< Bit position for I2S_RCSR_SEIE. */ +#define BM_I2S_RCSR_SEIE (0x00000800U) /*!< Bit mask for I2S_RCSR_SEIE. */ +#define BS_I2S_RCSR_SEIE (1U) /*!< Bit field size in bits for I2S_RCSR_SEIE. */ + +/*! @brief Read current value of the I2S_RCSR_SEIE field. */ +#define BR_I2S_RCSR_SEIE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SEIE)) + +/*! @brief Format value for bitfield I2S_RCSR_SEIE. */ +#define BF_I2S_RCSR_SEIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_SEIE) & BM_I2S_RCSR_SEIE) + +/*! @brief Set the SEIE field to a new value. */ +#define BW_I2S_RCSR_SEIE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SEIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field WSIE[12] (RW) + * + * Enables/disables word start interrupts. + * + * Values: + * - 0 - Disables interrupt. + * - 1 - Enables interrupt. + */ +/*@{*/ +#define BP_I2S_RCSR_WSIE (12U) /*!< Bit position for I2S_RCSR_WSIE. */ +#define BM_I2S_RCSR_WSIE (0x00001000U) /*!< Bit mask for I2S_RCSR_WSIE. */ +#define BS_I2S_RCSR_WSIE (1U) /*!< Bit field size in bits for I2S_RCSR_WSIE. */ + +/*! @brief Read current value of the I2S_RCSR_WSIE field. */ +#define BR_I2S_RCSR_WSIE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_WSIE)) + +/*! @brief Format value for bitfield I2S_RCSR_WSIE. */ +#define BF_I2S_RCSR_WSIE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_WSIE) & BM_I2S_RCSR_WSIE) + +/*! @brief Set the WSIE field to a new value. */ +#define BW_I2S_RCSR_WSIE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_WSIE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FRF[16] (RO) + * + * Indicates that the number of words in an enabled receive channel FIFO is + * greater than the receive FIFO watermark. + * + * Values: + * - 0 - Receive FIFO watermark not reached. + * - 1 - Receive FIFO watermark has been reached. + */ +/*@{*/ +#define BP_I2S_RCSR_FRF (16U) /*!< Bit position for I2S_RCSR_FRF. */ +#define BM_I2S_RCSR_FRF (0x00010000U) /*!< Bit mask for I2S_RCSR_FRF. */ +#define BS_I2S_RCSR_FRF (1U) /*!< Bit field size in bits for I2S_RCSR_FRF. */ + +/*! @brief Read current value of the I2S_RCSR_FRF field. */ +#define BR_I2S_RCSR_FRF(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FRF)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FWF[17] (RO) + * + * Indicates that an enabled receive FIFO is full. + * + * Values: + * - 0 - No enabled receive FIFO is full. + * - 1 - Enabled receive FIFO is full. + */ +/*@{*/ +#define BP_I2S_RCSR_FWF (17U) /*!< Bit position for I2S_RCSR_FWF. */ +#define BM_I2S_RCSR_FWF (0x00020000U) /*!< Bit mask for I2S_RCSR_FWF. */ +#define BS_I2S_RCSR_FWF (1U) /*!< Bit field size in bits for I2S_RCSR_FWF. */ + +/*! @brief Read current value of the I2S_RCSR_FWF field. */ +#define BR_I2S_RCSR_FWF(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FWF)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FEF[18] (W1C) + * + * Indicates that an enabled receive FIFO has overflowed. Write a logic 1 to + * this field to clear this flag. + * + * Values: + * - 0 - Receive overflow not detected. + * - 1 - Receive overflow detected. + */ +/*@{*/ +#define BP_I2S_RCSR_FEF (18U) /*!< Bit position for I2S_RCSR_FEF. */ +#define BM_I2S_RCSR_FEF (0x00040000U) /*!< Bit mask for I2S_RCSR_FEF. */ +#define BS_I2S_RCSR_FEF (1U) /*!< Bit field size in bits for I2S_RCSR_FEF. */ + +/*! @brief Read current value of the I2S_RCSR_FEF field. */ +#define BR_I2S_RCSR_FEF(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FEF)) + +/*! @brief Format value for bitfield I2S_RCSR_FEF. */ +#define BF_I2S_RCSR_FEF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FEF) & BM_I2S_RCSR_FEF) + +/*! @brief Set the FEF field to a new value. */ +#define BW_I2S_RCSR_FEF(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FEF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field SEF[19] (W1C) + * + * Indicates that an error in the externally-generated frame sync has been + * detected. Write a logic 1 to this field to clear this flag. + * + * Values: + * - 0 - Sync error not detected. + * - 1 - Frame sync error detected. + */ +/*@{*/ +#define BP_I2S_RCSR_SEF (19U) /*!< Bit position for I2S_RCSR_SEF. */ +#define BM_I2S_RCSR_SEF (0x00080000U) /*!< Bit mask for I2S_RCSR_SEF. */ +#define BS_I2S_RCSR_SEF (1U) /*!< Bit field size in bits for I2S_RCSR_SEF. */ + +/*! @brief Read current value of the I2S_RCSR_SEF field. */ +#define BR_I2S_RCSR_SEF(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SEF)) + +/*! @brief Format value for bitfield I2S_RCSR_SEF. */ +#define BF_I2S_RCSR_SEF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_SEF) & BM_I2S_RCSR_SEF) + +/*! @brief Set the SEF field to a new value. */ +#define BW_I2S_RCSR_SEF(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SEF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field WSF[20] (W1C) + * + * Indicates that the start of the configured word has been detected. Write a + * logic 1 to this field to clear this flag. + * + * Values: + * - 0 - Start of word not detected. + * - 1 - Start of word detected. + */ +/*@{*/ +#define BP_I2S_RCSR_WSF (20U) /*!< Bit position for I2S_RCSR_WSF. */ +#define BM_I2S_RCSR_WSF (0x00100000U) /*!< Bit mask for I2S_RCSR_WSF. */ +#define BS_I2S_RCSR_WSF (1U) /*!< Bit field size in bits for I2S_RCSR_WSF. */ + +/*! @brief Read current value of the I2S_RCSR_WSF field. */ +#define BR_I2S_RCSR_WSF(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_WSF)) + +/*! @brief Format value for bitfield I2S_RCSR_WSF. */ +#define BF_I2S_RCSR_WSF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_WSF) & BM_I2S_RCSR_WSF) + +/*! @brief Set the WSF field to a new value. */ +#define BW_I2S_RCSR_WSF(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_WSF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field SR[24] (RW) + * + * Resets the internal receiver logic including the FIFO pointers. + * Software-visible registers are not affected, except for the status registers. + * + * Values: + * - 0 - No effect. + * - 1 - Software reset. + */ +/*@{*/ +#define BP_I2S_RCSR_SR (24U) /*!< Bit position for I2S_RCSR_SR. */ +#define BM_I2S_RCSR_SR (0x01000000U) /*!< Bit mask for I2S_RCSR_SR. */ +#define BS_I2S_RCSR_SR (1U) /*!< Bit field size in bits for I2S_RCSR_SR. */ + +/*! @brief Read current value of the I2S_RCSR_SR field. */ +#define BR_I2S_RCSR_SR(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SR)) + +/*! @brief Format value for bitfield I2S_RCSR_SR. */ +#define BF_I2S_RCSR_SR(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_SR) & BM_I2S_RCSR_SR) + +/*! @brief Set the SR field to a new value. */ +#define BW_I2S_RCSR_SR(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_SR) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field FR[25] (WORZ) + * + * Resets the FIFO pointers. Reading this field will always return zero. FIFO + * pointers should only be reset when the receiver is disabled or the FIFO error + * flag is set. + * + * Values: + * - 0 - No effect. + * - 1 - FIFO reset. + */ +/*@{*/ +#define BP_I2S_RCSR_FR (25U) /*!< Bit position for I2S_RCSR_FR. */ +#define BM_I2S_RCSR_FR (0x02000000U) /*!< Bit mask for I2S_RCSR_FR. */ +#define BS_I2S_RCSR_FR (1U) /*!< Bit field size in bits for I2S_RCSR_FR. */ + +/*! @brief Format value for bitfield I2S_RCSR_FR. */ +#define BF_I2S_RCSR_FR(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_FR) & BM_I2S_RCSR_FR) + +/*! @brief Set the FR field to a new value. */ +#define BW_I2S_RCSR_FR(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_FR) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field BCE[28] (RW) + * + * Enables the receive bit clock, separately from RE. This field is + * automatically set whenever RE is set. When software clears this field, the receive bit + * clock remains enabled, and this field remains set, until the end of the current + * frame. + * + * Values: + * - 0 - Receive bit clock is disabled. + * - 1 - Receive bit clock is enabled. + */ +/*@{*/ +#define BP_I2S_RCSR_BCE (28U) /*!< Bit position for I2S_RCSR_BCE. */ +#define BM_I2S_RCSR_BCE (0x10000000U) /*!< Bit mask for I2S_RCSR_BCE. */ +#define BS_I2S_RCSR_BCE (1U) /*!< Bit field size in bits for I2S_RCSR_BCE. */ + +/*! @brief Read current value of the I2S_RCSR_BCE field. */ +#define BR_I2S_RCSR_BCE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_BCE)) + +/*! @brief Format value for bitfield I2S_RCSR_BCE. */ +#define BF_I2S_RCSR_BCE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_BCE) & BM_I2S_RCSR_BCE) + +/*! @brief Set the BCE field to a new value. */ +#define BW_I2S_RCSR_BCE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_BCE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field DBGE[29] (RW) + * + * Enables/disables receiver operation in Debug mode. The receive bit clock is + * not affected by Debug mode. + * + * Values: + * - 0 - Receiver is disabled in Debug mode, after completing the current frame. + * - 1 - Receiver is enabled in Debug mode. + */ +/*@{*/ +#define BP_I2S_RCSR_DBGE (29U) /*!< Bit position for I2S_RCSR_DBGE. */ +#define BM_I2S_RCSR_DBGE (0x20000000U) /*!< Bit mask for I2S_RCSR_DBGE. */ +#define BS_I2S_RCSR_DBGE (1U) /*!< Bit field size in bits for I2S_RCSR_DBGE. */ + +/*! @brief Read current value of the I2S_RCSR_DBGE field. */ +#define BR_I2S_RCSR_DBGE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_DBGE)) + +/*! @brief Format value for bitfield I2S_RCSR_DBGE. */ +#define BF_I2S_RCSR_DBGE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_DBGE) & BM_I2S_RCSR_DBGE) + +/*! @brief Set the DBGE field to a new value. */ +#define BW_I2S_RCSR_DBGE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_DBGE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field STOPE[30] (RW) + * + * Configures receiver operation in Stop mode. This bit is ignored and the + * receiver is disabled in all low-leakage stop modes. + * + * Values: + * - 0 - Receiver disabled in Stop mode. + * - 1 - Receiver enabled in Stop mode. + */ +/*@{*/ +#define BP_I2S_RCSR_STOPE (30U) /*!< Bit position for I2S_RCSR_STOPE. */ +#define BM_I2S_RCSR_STOPE (0x40000000U) /*!< Bit mask for I2S_RCSR_STOPE. */ +#define BS_I2S_RCSR_STOPE (1U) /*!< Bit field size in bits for I2S_RCSR_STOPE. */ + +/*! @brief Read current value of the I2S_RCSR_STOPE field. */ +#define BR_I2S_RCSR_STOPE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_STOPE)) + +/*! @brief Format value for bitfield I2S_RCSR_STOPE. */ +#define BF_I2S_RCSR_STOPE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_STOPE) & BM_I2S_RCSR_STOPE) + +/*! @brief Set the STOPE field to a new value. */ +#define BW_I2S_RCSR_STOPE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_STOPE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCSR, field RE[31] (RW) + * + * Enables/disables the receiver. When software clears this field, the receiver + * remains enabled, and this bit remains set, until the end of the current frame. + * + * Values: + * - 0 - Receiver is disabled. + * - 1 - Receiver is enabled, or receiver has been disabled and has not yet + * reached end of frame. + */ +/*@{*/ +#define BP_I2S_RCSR_RE (31U) /*!< Bit position for I2S_RCSR_RE. */ +#define BM_I2S_RCSR_RE (0x80000000U) /*!< Bit mask for I2S_RCSR_RE. */ +#define BS_I2S_RCSR_RE (1U) /*!< Bit field size in bits for I2S_RCSR_RE. */ + +/*! @brief Read current value of the I2S_RCSR_RE field. */ +#define BR_I2S_RCSR_RE(x) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_RE)) + +/*! @brief Format value for bitfield I2S_RCSR_RE. */ +#define BF_I2S_RCSR_RE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCSR_RE) & BM_I2S_RCSR_RE) + +/*! @brief Set the RE field to a new value. */ +#define BW_I2S_RCSR_RE(x, v) (BITBAND_ACCESS32(HW_I2S_RCSR_ADDR(x), BP_I2S_RCSR_RE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCR1 - SAI Receive Configuration 1 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCR1 - SAI Receive Configuration 1 Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_rcr1 +{ + uint32_t U; + struct _hw_i2s_rcr1_bitfields + { + uint32_t RFW : 3; /*!< [2:0] Receive FIFO Watermark */ + uint32_t RESERVED0 : 29; /*!< [31:3] */ + } B; +} hw_i2s_rcr1_t; + +/*! + * @name Constants and macros for entire I2S_RCR1 register + */ +/*@{*/ +#define HW_I2S_RCR1_ADDR(x) ((x) + 0x84U) + +#define HW_I2S_RCR1(x) (*(__IO hw_i2s_rcr1_t *) HW_I2S_RCR1_ADDR(x)) +#define HW_I2S_RCR1_RD(x) (HW_I2S_RCR1(x).U) +#define HW_I2S_RCR1_WR(x, v) (HW_I2S_RCR1(x).U = (v)) +#define HW_I2S_RCR1_SET(x, v) (HW_I2S_RCR1_WR(x, HW_I2S_RCR1_RD(x) | (v))) +#define HW_I2S_RCR1_CLR(x, v) (HW_I2S_RCR1_WR(x, HW_I2S_RCR1_RD(x) & ~(v))) +#define HW_I2S_RCR1_TOG(x, v) (HW_I2S_RCR1_WR(x, HW_I2S_RCR1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCR1 bitfields + */ + +/*! + * @name Register I2S_RCR1, field RFW[2:0] (RW) + * + * Configures the watermark level for all enabled receiver channels. + */ +/*@{*/ +#define BP_I2S_RCR1_RFW (0U) /*!< Bit position for I2S_RCR1_RFW. */ +#define BM_I2S_RCR1_RFW (0x00000007U) /*!< Bit mask for I2S_RCR1_RFW. */ +#define BS_I2S_RCR1_RFW (3U) /*!< Bit field size in bits for I2S_RCR1_RFW. */ + +/*! @brief Read current value of the I2S_RCR1_RFW field. */ +#define BR_I2S_RCR1_RFW(x) (HW_I2S_RCR1(x).B.RFW) + +/*! @brief Format value for bitfield I2S_RCR1_RFW. */ +#define BF_I2S_RCR1_RFW(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR1_RFW) & BM_I2S_RCR1_RFW) + +/*! @brief Set the RFW field to a new value. */ +#define BW_I2S_RCR1_RFW(x, v) (HW_I2S_RCR1_WR(x, (HW_I2S_RCR1_RD(x) & ~BM_I2S_RCR1_RFW) | BF_I2S_RCR1_RFW(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCR2 - SAI Receive Configuration 2 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCR2 - SAI Receive Configuration 2 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when RCSR[RE] is set. + */ +typedef union _hw_i2s_rcr2 +{ + uint32_t U; + struct _hw_i2s_rcr2_bitfields + { + uint32_t DIV : 8; /*!< [7:0] Bit Clock Divide */ + uint32_t RESERVED0 : 16; /*!< [23:8] */ + uint32_t BCD : 1; /*!< [24] Bit Clock Direction */ + uint32_t BCP : 1; /*!< [25] Bit Clock Polarity */ + uint32_t MSEL : 2; /*!< [27:26] MCLK Select */ + uint32_t BCI : 1; /*!< [28] Bit Clock Input */ + uint32_t BCS : 1; /*!< [29] Bit Clock Swap */ + uint32_t SYNC : 2; /*!< [31:30] Synchronous Mode */ + } B; +} hw_i2s_rcr2_t; + +/*! + * @name Constants and macros for entire I2S_RCR2 register + */ +/*@{*/ +#define HW_I2S_RCR2_ADDR(x) ((x) + 0x88U) + +#define HW_I2S_RCR2(x) (*(__IO hw_i2s_rcr2_t *) HW_I2S_RCR2_ADDR(x)) +#define HW_I2S_RCR2_RD(x) (HW_I2S_RCR2(x).U) +#define HW_I2S_RCR2_WR(x, v) (HW_I2S_RCR2(x).U = (v)) +#define HW_I2S_RCR2_SET(x, v) (HW_I2S_RCR2_WR(x, HW_I2S_RCR2_RD(x) | (v))) +#define HW_I2S_RCR2_CLR(x, v) (HW_I2S_RCR2_WR(x, HW_I2S_RCR2_RD(x) & ~(v))) +#define HW_I2S_RCR2_TOG(x, v) (HW_I2S_RCR2_WR(x, HW_I2S_RCR2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCR2 bitfields + */ + +/*! + * @name Register I2S_RCR2, field DIV[7:0] (RW) + * + * Divides down the audio master clock to generate the bit clock when configured + * for an internal bit clock. The division value is (DIV + 1) * 2. + */ +/*@{*/ +#define BP_I2S_RCR2_DIV (0U) /*!< Bit position for I2S_RCR2_DIV. */ +#define BM_I2S_RCR2_DIV (0x000000FFU) /*!< Bit mask for I2S_RCR2_DIV. */ +#define BS_I2S_RCR2_DIV (8U) /*!< Bit field size in bits for I2S_RCR2_DIV. */ + +/*! @brief Read current value of the I2S_RCR2_DIV field. */ +#define BR_I2S_RCR2_DIV(x) (HW_I2S_RCR2(x).B.DIV) + +/*! @brief Format value for bitfield I2S_RCR2_DIV. */ +#define BF_I2S_RCR2_DIV(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_DIV) & BM_I2S_RCR2_DIV) + +/*! @brief Set the DIV field to a new value. */ +#define BW_I2S_RCR2_DIV(x, v) (HW_I2S_RCR2_WR(x, (HW_I2S_RCR2_RD(x) & ~BM_I2S_RCR2_DIV) | BF_I2S_RCR2_DIV(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field BCD[24] (RW) + * + * Configures the direction of the bit clock. + * + * Values: + * - 0 - Bit clock is generated externally in Slave mode. + * - 1 - Bit clock is generated internally in Master mode. + */ +/*@{*/ +#define BP_I2S_RCR2_BCD (24U) /*!< Bit position for I2S_RCR2_BCD. */ +#define BM_I2S_RCR2_BCD (0x01000000U) /*!< Bit mask for I2S_RCR2_BCD. */ +#define BS_I2S_RCR2_BCD (1U) /*!< Bit field size in bits for I2S_RCR2_BCD. */ + +/*! @brief Read current value of the I2S_RCR2_BCD field. */ +#define BR_I2S_RCR2_BCD(x) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCD)) + +/*! @brief Format value for bitfield I2S_RCR2_BCD. */ +#define BF_I2S_RCR2_BCD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_BCD) & BM_I2S_RCR2_BCD) + +/*! @brief Set the BCD field to a new value. */ +#define BW_I2S_RCR2_BCD(x, v) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCD) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field BCP[25] (RW) + * + * Configures the polarity of the bit clock. + * + * Values: + * - 0 - Bit Clock is active high with drive outputs on rising edge and sample + * inputs on falling edge. + * - 1 - Bit Clock is active low with drive outputs on falling edge and sample + * inputs on rising edge. + */ +/*@{*/ +#define BP_I2S_RCR2_BCP (25U) /*!< Bit position for I2S_RCR2_BCP. */ +#define BM_I2S_RCR2_BCP (0x02000000U) /*!< Bit mask for I2S_RCR2_BCP. */ +#define BS_I2S_RCR2_BCP (1U) /*!< Bit field size in bits for I2S_RCR2_BCP. */ + +/*! @brief Read current value of the I2S_RCR2_BCP field. */ +#define BR_I2S_RCR2_BCP(x) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCP)) + +/*! @brief Format value for bitfield I2S_RCR2_BCP. */ +#define BF_I2S_RCR2_BCP(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_BCP) & BM_I2S_RCR2_BCP) + +/*! @brief Set the BCP field to a new value. */ +#define BW_I2S_RCR2_BCP(x, v) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCP) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field MSEL[27:26] (RW) + * + * Selects the audio Master Clock option used to generate an internally + * generated bit clock. This field has no effect when configured for an externally + * generated bit clock. Depending on the device, some Master Clock options might not be + * available. See the chip configuration details for the availability and + * chip-specific meaning of each option. + * + * Values: + * - 00 - Bus Clock selected. + * - 01 - Master Clock (MCLK) 1 option selected. + * - 10 - Master Clock (MCLK) 2 option selected. + * - 11 - Master Clock (MCLK) 3 option selected. + */ +/*@{*/ +#define BP_I2S_RCR2_MSEL (26U) /*!< Bit position for I2S_RCR2_MSEL. */ +#define BM_I2S_RCR2_MSEL (0x0C000000U) /*!< Bit mask for I2S_RCR2_MSEL. */ +#define BS_I2S_RCR2_MSEL (2U) /*!< Bit field size in bits for I2S_RCR2_MSEL. */ + +/*! @brief Read current value of the I2S_RCR2_MSEL field. */ +#define BR_I2S_RCR2_MSEL(x) (HW_I2S_RCR2(x).B.MSEL) + +/*! @brief Format value for bitfield I2S_RCR2_MSEL. */ +#define BF_I2S_RCR2_MSEL(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_MSEL) & BM_I2S_RCR2_MSEL) + +/*! @brief Set the MSEL field to a new value. */ +#define BW_I2S_RCR2_MSEL(x, v) (HW_I2S_RCR2_WR(x, (HW_I2S_RCR2_RD(x) & ~BM_I2S_RCR2_MSEL) | BF_I2S_RCR2_MSEL(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field BCI[28] (RW) + * + * When this field is set and using an internally generated bit clock in either + * synchronous or asynchronous mode, the bit clock actually used by the receiver + * is delayed by the pad output delay (the receiver is clocked by the pad input + * as if the clock was externally generated). This has the effect of decreasing + * the data input setup time, but increasing the data output valid time. The slave + * mode timing from the datasheet should be used for the receiver when this bit + * is set. In synchronous mode, this bit allows the receiver to use the slave mode + * timing from the datasheet, while the transmitter uses the master mode timing. + * This field has no effect when configured for an externally generated bit + * clock . + * + * Values: + * - 0 - No effect. + * - 1 - Internal logic is clocked as if bit clock was externally generated. + */ +/*@{*/ +#define BP_I2S_RCR2_BCI (28U) /*!< Bit position for I2S_RCR2_BCI. */ +#define BM_I2S_RCR2_BCI (0x10000000U) /*!< Bit mask for I2S_RCR2_BCI. */ +#define BS_I2S_RCR2_BCI (1U) /*!< Bit field size in bits for I2S_RCR2_BCI. */ + +/*! @brief Read current value of the I2S_RCR2_BCI field. */ +#define BR_I2S_RCR2_BCI(x) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCI)) + +/*! @brief Format value for bitfield I2S_RCR2_BCI. */ +#define BF_I2S_RCR2_BCI(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_BCI) & BM_I2S_RCR2_BCI) + +/*! @brief Set the BCI field to a new value. */ +#define BW_I2S_RCR2_BCI(x, v) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCI) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field BCS[29] (RW) + * + * This field swaps the bit clock used by the receiver. When the receiver is + * configured in asynchronous mode and this bit is set, the receiver is clocked by + * the transmitter bit clock (SAI_TX_BCLK). This allows the transmitter and + * receiver to share the same bit clock, but the receiver continues to use the receiver + * frame sync (SAI_RX_SYNC). When the receiver is configured in synchronous + * mode, the transmitter BCS field and receiver BCS field must be set to the same + * value. When both are set, the transmitter and receiver are both clocked by the + * receiver bit clock (SAI_RX_BCLK) but use the transmitter frame sync + * (SAI_TX_SYNC). + * + * Values: + * - 0 - Use the normal bit clock source. + * - 1 - Swap the bit clock source. + */ +/*@{*/ +#define BP_I2S_RCR2_BCS (29U) /*!< Bit position for I2S_RCR2_BCS. */ +#define BM_I2S_RCR2_BCS (0x20000000U) /*!< Bit mask for I2S_RCR2_BCS. */ +#define BS_I2S_RCR2_BCS (1U) /*!< Bit field size in bits for I2S_RCR2_BCS. */ + +/*! @brief Read current value of the I2S_RCR2_BCS field. */ +#define BR_I2S_RCR2_BCS(x) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCS)) + +/*! @brief Format value for bitfield I2S_RCR2_BCS. */ +#define BF_I2S_RCR2_BCS(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_BCS) & BM_I2S_RCR2_BCS) + +/*! @brief Set the BCS field to a new value. */ +#define BW_I2S_RCR2_BCS(x, v) (BITBAND_ACCESS32(HW_I2S_RCR2_ADDR(x), BP_I2S_RCR2_BCS) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR2, field SYNC[31:30] (RW) + * + * Configures between asynchronous and synchronous modes of operation. When + * configured for a synchronous mode of operation, the transmitter must be configured + * for asynchronous operation. + * + * Values: + * - 00 - Asynchronous mode. + * - 01 - Synchronous with transmitter. + * - 10 - Synchronous with another SAI receiver. + * - 11 - Synchronous with another SAI transmitter. + */ +/*@{*/ +#define BP_I2S_RCR2_SYNC (30U) /*!< Bit position for I2S_RCR2_SYNC. */ +#define BM_I2S_RCR2_SYNC (0xC0000000U) /*!< Bit mask for I2S_RCR2_SYNC. */ +#define BS_I2S_RCR2_SYNC (2U) /*!< Bit field size in bits for I2S_RCR2_SYNC. */ + +/*! @brief Read current value of the I2S_RCR2_SYNC field. */ +#define BR_I2S_RCR2_SYNC(x) (HW_I2S_RCR2(x).B.SYNC) + +/*! @brief Format value for bitfield I2S_RCR2_SYNC. */ +#define BF_I2S_RCR2_SYNC(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR2_SYNC) & BM_I2S_RCR2_SYNC) + +/*! @brief Set the SYNC field to a new value. */ +#define BW_I2S_RCR2_SYNC(x, v) (HW_I2S_RCR2_WR(x, (HW_I2S_RCR2_RD(x) & ~BM_I2S_RCR2_SYNC) | BF_I2S_RCR2_SYNC(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCR3 - SAI Receive Configuration 3 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCR3 - SAI Receive Configuration 3 Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_i2s_rcr3 +{ + uint32_t U; + struct _hw_i2s_rcr3_bitfields + { + uint32_t WDFL : 4; /*!< [3:0] Word Flag Configuration */ + uint32_t RESERVED0 : 12; /*!< [15:4] */ + uint32_t RCE : 1; /*!< [16] Receive Channel Enable */ + uint32_t RESERVED1 : 15; /*!< [31:17] */ + } B; +} hw_i2s_rcr3_t; + +/*! + * @name Constants and macros for entire I2S_RCR3 register + */ +/*@{*/ +#define HW_I2S_RCR3_ADDR(x) ((x) + 0x8CU) + +#define HW_I2S_RCR3(x) (*(__IO hw_i2s_rcr3_t *) HW_I2S_RCR3_ADDR(x)) +#define HW_I2S_RCR3_RD(x) (HW_I2S_RCR3(x).U) +#define HW_I2S_RCR3_WR(x, v) (HW_I2S_RCR3(x).U = (v)) +#define HW_I2S_RCR3_SET(x, v) (HW_I2S_RCR3_WR(x, HW_I2S_RCR3_RD(x) | (v))) +#define HW_I2S_RCR3_CLR(x, v) (HW_I2S_RCR3_WR(x, HW_I2S_RCR3_RD(x) & ~(v))) +#define HW_I2S_RCR3_TOG(x, v) (HW_I2S_RCR3_WR(x, HW_I2S_RCR3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCR3 bitfields + */ + +/*! + * @name Register I2S_RCR3, field WDFL[3:0] (RW) + * + * Configures which word the start of word flag is set. The value written should + * be one less than the word number (for example, write zero to configure for + * the first word in the frame). When configured to a value greater than the Frame + * Size field, then the start of word flag is never set. + */ +/*@{*/ +#define BP_I2S_RCR3_WDFL (0U) /*!< Bit position for I2S_RCR3_WDFL. */ +#define BM_I2S_RCR3_WDFL (0x0000000FU) /*!< Bit mask for I2S_RCR3_WDFL. */ +#define BS_I2S_RCR3_WDFL (4U) /*!< Bit field size in bits for I2S_RCR3_WDFL. */ + +/*! @brief Read current value of the I2S_RCR3_WDFL field. */ +#define BR_I2S_RCR3_WDFL(x) (HW_I2S_RCR3(x).B.WDFL) + +/*! @brief Format value for bitfield I2S_RCR3_WDFL. */ +#define BF_I2S_RCR3_WDFL(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR3_WDFL) & BM_I2S_RCR3_WDFL) + +/*! @brief Set the WDFL field to a new value. */ +#define BW_I2S_RCR3_WDFL(x, v) (HW_I2S_RCR3_WR(x, (HW_I2S_RCR3_RD(x) & ~BM_I2S_RCR3_WDFL) | BF_I2S_RCR3_WDFL(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR3, field RCE[16] (RW) + * + * Enables the corresponding data channel for receive operation. A channel must + * be enabled before its FIFO is accessed. Changing this field will take effect + * immediately for generating the FIFO request and warning flags, but at the end + * of each frame for receive operation. + * + * Values: + * - 0 - Receive data channel N is disabled. + * - 1 - Receive data channel N is enabled. + */ +/*@{*/ +#define BP_I2S_RCR3_RCE (16U) /*!< Bit position for I2S_RCR3_RCE. */ +#define BM_I2S_RCR3_RCE (0x00010000U) /*!< Bit mask for I2S_RCR3_RCE. */ +#define BS_I2S_RCR3_RCE (1U) /*!< Bit field size in bits for I2S_RCR3_RCE. */ + +/*! @brief Read current value of the I2S_RCR3_RCE field. */ +#define BR_I2S_RCR3_RCE(x) (BITBAND_ACCESS32(HW_I2S_RCR3_ADDR(x), BP_I2S_RCR3_RCE)) + +/*! @brief Format value for bitfield I2S_RCR3_RCE. */ +#define BF_I2S_RCR3_RCE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR3_RCE) & BM_I2S_RCR3_RCE) + +/*! @brief Set the RCE field to a new value. */ +#define BW_I2S_RCR3_RCE(x, v) (BITBAND_ACCESS32(HW_I2S_RCR3_ADDR(x), BP_I2S_RCR3_RCE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCR4 - SAI Receive Configuration 4 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCR4 - SAI Receive Configuration 4 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when RCSR[RE] is set. + */ +typedef union _hw_i2s_rcr4 +{ + uint32_t U; + struct _hw_i2s_rcr4_bitfields + { + uint32_t FSD : 1; /*!< [0] Frame Sync Direction */ + uint32_t FSP : 1; /*!< [1] Frame Sync Polarity */ + uint32_t ONDEM : 1; /*!< [2] On Demand Mode */ + uint32_t FSE : 1; /*!< [3] Frame Sync Early */ + uint32_t MF : 1; /*!< [4] MSB First */ + uint32_t RESERVED0 : 3; /*!< [7:5] */ + uint32_t SYWD : 5; /*!< [12:8] Sync Width */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t FRSZ : 4; /*!< [19:16] Frame Size */ + uint32_t RESERVED2 : 4; /*!< [23:20] */ + uint32_t FPACK : 2; /*!< [25:24] FIFO Packing Mode */ + uint32_t RESERVED3 : 2; /*!< [27:26] */ + uint32_t FCONT : 1; /*!< [28] FIFO Continue on Error */ + uint32_t RESERVED4 : 3; /*!< [31:29] */ + } B; +} hw_i2s_rcr4_t; + +/*! + * @name Constants and macros for entire I2S_RCR4 register + */ +/*@{*/ +#define HW_I2S_RCR4_ADDR(x) ((x) + 0x90U) + +#define HW_I2S_RCR4(x) (*(__IO hw_i2s_rcr4_t *) HW_I2S_RCR4_ADDR(x)) +#define HW_I2S_RCR4_RD(x) (HW_I2S_RCR4(x).U) +#define HW_I2S_RCR4_WR(x, v) (HW_I2S_RCR4(x).U = (v)) +#define HW_I2S_RCR4_SET(x, v) (HW_I2S_RCR4_WR(x, HW_I2S_RCR4_RD(x) | (v))) +#define HW_I2S_RCR4_CLR(x, v) (HW_I2S_RCR4_WR(x, HW_I2S_RCR4_RD(x) & ~(v))) +#define HW_I2S_RCR4_TOG(x, v) (HW_I2S_RCR4_WR(x, HW_I2S_RCR4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCR4 bitfields + */ + +/*! + * @name Register I2S_RCR4, field FSD[0] (RW) + * + * Configures the direction of the frame sync. + * + * Values: + * - 0 - Frame Sync is generated externally in Slave mode. + * - 1 - Frame Sync is generated internally in Master mode. + */ +/*@{*/ +#define BP_I2S_RCR4_FSD (0U) /*!< Bit position for I2S_RCR4_FSD. */ +#define BM_I2S_RCR4_FSD (0x00000001U) /*!< Bit mask for I2S_RCR4_FSD. */ +#define BS_I2S_RCR4_FSD (1U) /*!< Bit field size in bits for I2S_RCR4_FSD. */ + +/*! @brief Read current value of the I2S_RCR4_FSD field. */ +#define BR_I2S_RCR4_FSD(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSD)) + +/*! @brief Format value for bitfield I2S_RCR4_FSD. */ +#define BF_I2S_RCR4_FSD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FSD) & BM_I2S_RCR4_FSD) + +/*! @brief Set the FSD field to a new value. */ +#define BW_I2S_RCR4_FSD(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSD) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field FSP[1] (RW) + * + * Configures the polarity of the frame sync. + * + * Values: + * - 0 - Frame sync is active high. + * - 1 - Frame sync is active low. + */ +/*@{*/ +#define BP_I2S_RCR4_FSP (1U) /*!< Bit position for I2S_RCR4_FSP. */ +#define BM_I2S_RCR4_FSP (0x00000002U) /*!< Bit mask for I2S_RCR4_FSP. */ +#define BS_I2S_RCR4_FSP (1U) /*!< Bit field size in bits for I2S_RCR4_FSP. */ + +/*! @brief Read current value of the I2S_RCR4_FSP field. */ +#define BR_I2S_RCR4_FSP(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSP)) + +/*! @brief Format value for bitfield I2S_RCR4_FSP. */ +#define BF_I2S_RCR4_FSP(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FSP) & BM_I2S_RCR4_FSP) + +/*! @brief Set the FSP field to a new value. */ +#define BW_I2S_RCR4_FSP(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSP) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field ONDEM[2] (RW) + * + * When set, and the frame sync is generated internally, a frame sync is only + * generated when the FIFO warning flag is clear. + * + * Values: + * - 0 - Internal frame sync is generated continuously. + * - 1 - Internal frame sync is generated when the FIFO warning flag is clear. + */ +/*@{*/ +#define BP_I2S_RCR4_ONDEM (2U) /*!< Bit position for I2S_RCR4_ONDEM. */ +#define BM_I2S_RCR4_ONDEM (0x00000004U) /*!< Bit mask for I2S_RCR4_ONDEM. */ +#define BS_I2S_RCR4_ONDEM (1U) /*!< Bit field size in bits for I2S_RCR4_ONDEM. */ + +/*! @brief Read current value of the I2S_RCR4_ONDEM field. */ +#define BR_I2S_RCR4_ONDEM(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_ONDEM)) + +/*! @brief Format value for bitfield I2S_RCR4_ONDEM. */ +#define BF_I2S_RCR4_ONDEM(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_ONDEM) & BM_I2S_RCR4_ONDEM) + +/*! @brief Set the ONDEM field to a new value. */ +#define BW_I2S_RCR4_ONDEM(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_ONDEM) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field FSE[3] (RW) + * + * Values: + * - 0 - Frame sync asserts with the first bit of the frame. + * - 1 - Frame sync asserts one bit before the first bit of the frame. + */ +/*@{*/ +#define BP_I2S_RCR4_FSE (3U) /*!< Bit position for I2S_RCR4_FSE. */ +#define BM_I2S_RCR4_FSE (0x00000008U) /*!< Bit mask for I2S_RCR4_FSE. */ +#define BS_I2S_RCR4_FSE (1U) /*!< Bit field size in bits for I2S_RCR4_FSE. */ + +/*! @brief Read current value of the I2S_RCR4_FSE field. */ +#define BR_I2S_RCR4_FSE(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSE)) + +/*! @brief Format value for bitfield I2S_RCR4_FSE. */ +#define BF_I2S_RCR4_FSE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FSE) & BM_I2S_RCR4_FSE) + +/*! @brief Set the FSE field to a new value. */ +#define BW_I2S_RCR4_FSE(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FSE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field MF[4] (RW) + * + * Configures whether the LSB or the MSB is received first. + * + * Values: + * - 0 - LSB is received first. + * - 1 - MSB is received first. + */ +/*@{*/ +#define BP_I2S_RCR4_MF (4U) /*!< Bit position for I2S_RCR4_MF. */ +#define BM_I2S_RCR4_MF (0x00000010U) /*!< Bit mask for I2S_RCR4_MF. */ +#define BS_I2S_RCR4_MF (1U) /*!< Bit field size in bits for I2S_RCR4_MF. */ + +/*! @brief Read current value of the I2S_RCR4_MF field. */ +#define BR_I2S_RCR4_MF(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_MF)) + +/*! @brief Format value for bitfield I2S_RCR4_MF. */ +#define BF_I2S_RCR4_MF(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_MF) & BM_I2S_RCR4_MF) + +/*! @brief Set the MF field to a new value. */ +#define BW_I2S_RCR4_MF(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_MF) = (v)) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field SYWD[12:8] (RW) + * + * Configures the length of the frame sync in number of bit clocks. The value + * written must be one less than the number of bit clocks. For example, write 0 for + * the frame sync to assert for one bit clock only. The sync width cannot be + * configured longer than the first word of the frame. + */ +/*@{*/ +#define BP_I2S_RCR4_SYWD (8U) /*!< Bit position for I2S_RCR4_SYWD. */ +#define BM_I2S_RCR4_SYWD (0x00001F00U) /*!< Bit mask for I2S_RCR4_SYWD. */ +#define BS_I2S_RCR4_SYWD (5U) /*!< Bit field size in bits for I2S_RCR4_SYWD. */ + +/*! @brief Read current value of the I2S_RCR4_SYWD field. */ +#define BR_I2S_RCR4_SYWD(x) (HW_I2S_RCR4(x).B.SYWD) + +/*! @brief Format value for bitfield I2S_RCR4_SYWD. */ +#define BF_I2S_RCR4_SYWD(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_SYWD) & BM_I2S_RCR4_SYWD) + +/*! @brief Set the SYWD field to a new value. */ +#define BW_I2S_RCR4_SYWD(x, v) (HW_I2S_RCR4_WR(x, (HW_I2S_RCR4_RD(x) & ~BM_I2S_RCR4_SYWD) | BF_I2S_RCR4_SYWD(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field FRSZ[19:16] (RW) + * + * Configures the number of words in each frame. The value written must be one + * less than the number of words in the frame. For example, write 0 for one word + * per frame. The maximum supported frame size is 16 words. + */ +/*@{*/ +#define BP_I2S_RCR4_FRSZ (16U) /*!< Bit position for I2S_RCR4_FRSZ. */ +#define BM_I2S_RCR4_FRSZ (0x000F0000U) /*!< Bit mask for I2S_RCR4_FRSZ. */ +#define BS_I2S_RCR4_FRSZ (4U) /*!< Bit field size in bits for I2S_RCR4_FRSZ. */ + +/*! @brief Read current value of the I2S_RCR4_FRSZ field. */ +#define BR_I2S_RCR4_FRSZ(x) (HW_I2S_RCR4(x).B.FRSZ) + +/*! @brief Format value for bitfield I2S_RCR4_FRSZ. */ +#define BF_I2S_RCR4_FRSZ(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FRSZ) & BM_I2S_RCR4_FRSZ) + +/*! @brief Set the FRSZ field to a new value. */ +#define BW_I2S_RCR4_FRSZ(x, v) (HW_I2S_RCR4_WR(x, (HW_I2S_RCR4_RD(x) & ~BM_I2S_RCR4_FRSZ) | BF_I2S_RCR4_FRSZ(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field FPACK[25:24] (RW) + * + * Enables packing of 8-bit data or 16-bit data into each 32-bit FIFO word. If + * the word size is greater than 8-bit or 16-bit then only the first 8-bit or + * 16-bits are stored to the FIFO. The first word in each frame always starts with a + * new 32-bit FIFO word and the first bit shifted must be configured within the + * first packed word. When FIFO packing is enabled, the FIFO read pointer will + * only increment when the full 32-bit FIFO word has been read by software. + * + * Values: + * - 00 - FIFO packing is disabled + * - 01 - Reserved. + * - 10 - 8-bit FIFO packing is enabled + * - 11 - 16-bit FIFO packing is enabled + */ +/*@{*/ +#define BP_I2S_RCR4_FPACK (24U) /*!< Bit position for I2S_RCR4_FPACK. */ +#define BM_I2S_RCR4_FPACK (0x03000000U) /*!< Bit mask for I2S_RCR4_FPACK. */ +#define BS_I2S_RCR4_FPACK (2U) /*!< Bit field size in bits for I2S_RCR4_FPACK. */ + +/*! @brief Read current value of the I2S_RCR4_FPACK field. */ +#define BR_I2S_RCR4_FPACK(x) (HW_I2S_RCR4(x).B.FPACK) + +/*! @brief Format value for bitfield I2S_RCR4_FPACK. */ +#define BF_I2S_RCR4_FPACK(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FPACK) & BM_I2S_RCR4_FPACK) + +/*! @brief Set the FPACK field to a new value. */ +#define BW_I2S_RCR4_FPACK(x, v) (HW_I2S_RCR4_WR(x, (HW_I2S_RCR4_RD(x) & ~BM_I2S_RCR4_FPACK) | BF_I2S_RCR4_FPACK(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR4, field FCONT[28] (RW) + * + * Configures when the SAI will continue receiving after a FIFO error has been + * detected. + * + * Values: + * - 0 - On FIFO error, the SAI will continue from the start of the next frame + * after the FIFO error flag has been cleared. + * - 1 - On FIFO error, the SAI will continue from the same word that caused the + * FIFO error to set after the FIFO warning flag has been cleared. + */ +/*@{*/ +#define BP_I2S_RCR4_FCONT (28U) /*!< Bit position for I2S_RCR4_FCONT. */ +#define BM_I2S_RCR4_FCONT (0x10000000U) /*!< Bit mask for I2S_RCR4_FCONT. */ +#define BS_I2S_RCR4_FCONT (1U) /*!< Bit field size in bits for I2S_RCR4_FCONT. */ + +/*! @brief Read current value of the I2S_RCR4_FCONT field. */ +#define BR_I2S_RCR4_FCONT(x) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FCONT)) + +/*! @brief Format value for bitfield I2S_RCR4_FCONT. */ +#define BF_I2S_RCR4_FCONT(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR4_FCONT) & BM_I2S_RCR4_FCONT) + +/*! @brief Set the FCONT field to a new value. */ +#define BW_I2S_RCR4_FCONT(x, v) (BITBAND_ACCESS32(HW_I2S_RCR4_ADDR(x), BP_I2S_RCR4_FCONT) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RCR5 - SAI Receive Configuration 5 Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RCR5 - SAI Receive Configuration 5 Register (RW) + * + * Reset value: 0x00000000U + * + * This register must not be altered when RCSR[RE] is set. + */ +typedef union _hw_i2s_rcr5 +{ + uint32_t U; + struct _hw_i2s_rcr5_bitfields + { + uint32_t RESERVED0 : 8; /*!< [7:0] */ + uint32_t FBT : 5; /*!< [12:8] First Bit Shifted */ + uint32_t RESERVED1 : 3; /*!< [15:13] */ + uint32_t W0W : 5; /*!< [20:16] Word 0 Width */ + uint32_t RESERVED2 : 3; /*!< [23:21] */ + uint32_t WNW : 5; /*!< [28:24] Word N Width */ + uint32_t RESERVED3 : 3; /*!< [31:29] */ + } B; +} hw_i2s_rcr5_t; + +/*! + * @name Constants and macros for entire I2S_RCR5 register + */ +/*@{*/ +#define HW_I2S_RCR5_ADDR(x) ((x) + 0x94U) + +#define HW_I2S_RCR5(x) (*(__IO hw_i2s_rcr5_t *) HW_I2S_RCR5_ADDR(x)) +#define HW_I2S_RCR5_RD(x) (HW_I2S_RCR5(x).U) +#define HW_I2S_RCR5_WR(x, v) (HW_I2S_RCR5(x).U = (v)) +#define HW_I2S_RCR5_SET(x, v) (HW_I2S_RCR5_WR(x, HW_I2S_RCR5_RD(x) | (v))) +#define HW_I2S_RCR5_CLR(x, v) (HW_I2S_RCR5_WR(x, HW_I2S_RCR5_RD(x) & ~(v))) +#define HW_I2S_RCR5_TOG(x, v) (HW_I2S_RCR5_WR(x, HW_I2S_RCR5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RCR5 bitfields + */ + +/*! + * @name Register I2S_RCR5, field FBT[12:8] (RW) + * + * Configures the bit index for the first bit received for each word in the + * frame. If configured for MSB First, the index of the next bit received is one less + * than the current bit received. If configured for LSB First, the index of the + * next bit received is one more than the current bit received. The value written + * must be greater than or equal to the word width when configured for MSB + * First. The value written must be less than or equal to 31-word width when + * configured for LSB First. + */ +/*@{*/ +#define BP_I2S_RCR5_FBT (8U) /*!< Bit position for I2S_RCR5_FBT. */ +#define BM_I2S_RCR5_FBT (0x00001F00U) /*!< Bit mask for I2S_RCR5_FBT. */ +#define BS_I2S_RCR5_FBT (5U) /*!< Bit field size in bits for I2S_RCR5_FBT. */ + +/*! @brief Read current value of the I2S_RCR5_FBT field. */ +#define BR_I2S_RCR5_FBT(x) (HW_I2S_RCR5(x).B.FBT) + +/*! @brief Format value for bitfield I2S_RCR5_FBT. */ +#define BF_I2S_RCR5_FBT(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR5_FBT) & BM_I2S_RCR5_FBT) + +/*! @brief Set the FBT field to a new value. */ +#define BW_I2S_RCR5_FBT(x, v) (HW_I2S_RCR5_WR(x, (HW_I2S_RCR5_RD(x) & ~BM_I2S_RCR5_FBT) | BF_I2S_RCR5_FBT(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR5, field W0W[20:16] (RW) + * + * Configures the number of bits in the first word in each frame. The value + * written must be one less than the number of bits in the first word. Word width of + * less than 8 bits is not supported if there is only one word per frame. + */ +/*@{*/ +#define BP_I2S_RCR5_W0W (16U) /*!< Bit position for I2S_RCR5_W0W. */ +#define BM_I2S_RCR5_W0W (0x001F0000U) /*!< Bit mask for I2S_RCR5_W0W. */ +#define BS_I2S_RCR5_W0W (5U) /*!< Bit field size in bits for I2S_RCR5_W0W. */ + +/*! @brief Read current value of the I2S_RCR5_W0W field. */ +#define BR_I2S_RCR5_W0W(x) (HW_I2S_RCR5(x).B.W0W) + +/*! @brief Format value for bitfield I2S_RCR5_W0W. */ +#define BF_I2S_RCR5_W0W(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR5_W0W) & BM_I2S_RCR5_W0W) + +/*! @brief Set the W0W field to a new value. */ +#define BW_I2S_RCR5_W0W(x, v) (HW_I2S_RCR5_WR(x, (HW_I2S_RCR5_RD(x) & ~BM_I2S_RCR5_W0W) | BF_I2S_RCR5_W0W(v))) +/*@}*/ + +/*! + * @name Register I2S_RCR5, field WNW[28:24] (RW) + * + * Configures the number of bits in each word, for each word except the first in + * the frame. The value written must be one less than the number of bits per + * word. Word width of less than 8 bits is not supported. + */ +/*@{*/ +#define BP_I2S_RCR5_WNW (24U) /*!< Bit position for I2S_RCR5_WNW. */ +#define BM_I2S_RCR5_WNW (0x1F000000U) /*!< Bit mask for I2S_RCR5_WNW. */ +#define BS_I2S_RCR5_WNW (5U) /*!< Bit field size in bits for I2S_RCR5_WNW. */ + +/*! @brief Read current value of the I2S_RCR5_WNW field. */ +#define BR_I2S_RCR5_WNW(x) (HW_I2S_RCR5(x).B.WNW) + +/*! @brief Format value for bitfield I2S_RCR5_WNW. */ +#define BF_I2S_RCR5_WNW(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RCR5_WNW) & BM_I2S_RCR5_WNW) + +/*! @brief Set the WNW field to a new value. */ +#define BW_I2S_RCR5_WNW(x, v) (HW_I2S_RCR5_WR(x, (HW_I2S_RCR5_RD(x) & ~BM_I2S_RCR5_WNW) | BF_I2S_RCR5_WNW(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RDRn - SAI Receive Data Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RDRn - SAI Receive Data Register (RO) + * + * Reset value: 0x00000000U + * + * Reading this register introduces one additional peripheral clock wait state + * on each read. + */ +typedef union _hw_i2s_rdrn +{ + uint32_t U; + struct _hw_i2s_rdrn_bitfields + { + uint32_t RDR : 32; /*!< [31:0] Receive Data Register */ + } B; +} hw_i2s_rdrn_t; + +/*! + * @name Constants and macros for entire I2S_RDRn register + */ +/*@{*/ +#define HW_I2S_RDRn_COUNT (1U) + +#define HW_I2S_RDRn_ADDR(x, n) ((x) + 0xA0U + (0x4U * (n))) + +#define HW_I2S_RDRn(x, n) (*(__I hw_i2s_rdrn_t *) HW_I2S_RDRn_ADDR(x, n)) +#define HW_I2S_RDRn_RD(x, n) (HW_I2S_RDRn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual I2S_RDRn bitfields + */ + +/*! + * @name Register I2S_RDRn, field RDR[31:0] (RO) + * + * The corresponding RCR3[RCE] bit must be set before accessing the channel's + * receive data register. Reads from this register when the receive FIFO is not + * empty will return the data from the top of the receive FIFO. Reads from this + * register when the receive FIFO is empty are ignored. + */ +/*@{*/ +#define BP_I2S_RDRn_RDR (0U) /*!< Bit position for I2S_RDRn_RDR. */ +#define BM_I2S_RDRn_RDR (0xFFFFFFFFU) /*!< Bit mask for I2S_RDRn_RDR. */ +#define BS_I2S_RDRn_RDR (32U) /*!< Bit field size in bits for I2S_RDRn_RDR. */ + +/*! @brief Read current value of the I2S_RDRn_RDR field. */ +#define BR_I2S_RDRn_RDR(x, n) (HW_I2S_RDRn(x, n).U) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RFRn - SAI Receive FIFO Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RFRn - SAI Receive FIFO Register (RO) + * + * Reset value: 0x00000000U + * + * The MSB of the read and write pointers is used to distinguish between FIFO + * full and empty conditions. If the read and write pointers are identical, then + * the FIFO is empty. If the read and write pointers are identical except for the + * MSB, then the FIFO is full. + */ +typedef union _hw_i2s_rfrn +{ + uint32_t U; + struct _hw_i2s_rfrn_bitfields + { + uint32_t RFP : 4; /*!< [3:0] Read FIFO Pointer */ + uint32_t RESERVED0 : 12; /*!< [15:4] */ + uint32_t WFP : 4; /*!< [19:16] Write FIFO Pointer */ + uint32_t RESERVED1 : 12; /*!< [31:20] */ + } B; +} hw_i2s_rfrn_t; + +/*! + * @name Constants and macros for entire I2S_RFRn register + */ +/*@{*/ +#define HW_I2S_RFRn_COUNT (1U) + +#define HW_I2S_RFRn_ADDR(x, n) ((x) + 0xC0U + (0x4U * (n))) + +#define HW_I2S_RFRn(x, n) (*(__I hw_i2s_rfrn_t *) HW_I2S_RFRn_ADDR(x, n)) +#define HW_I2S_RFRn_RD(x, n) (HW_I2S_RFRn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual I2S_RFRn bitfields + */ + +/*! + * @name Register I2S_RFRn, field RFP[3:0] (RO) + * + * FIFO read pointer for receive data channel. + */ +/*@{*/ +#define BP_I2S_RFRn_RFP (0U) /*!< Bit position for I2S_RFRn_RFP. */ +#define BM_I2S_RFRn_RFP (0x0000000FU) /*!< Bit mask for I2S_RFRn_RFP. */ +#define BS_I2S_RFRn_RFP (4U) /*!< Bit field size in bits for I2S_RFRn_RFP. */ + +/*! @brief Read current value of the I2S_RFRn_RFP field. */ +#define BR_I2S_RFRn_RFP(x, n) (HW_I2S_RFRn(x, n).B.RFP) +/*@}*/ + +/*! + * @name Register I2S_RFRn, field WFP[19:16] (RO) + * + * FIFO write pointer for receive data channel. + */ +/*@{*/ +#define BP_I2S_RFRn_WFP (16U) /*!< Bit position for I2S_RFRn_WFP. */ +#define BM_I2S_RFRn_WFP (0x000F0000U) /*!< Bit mask for I2S_RFRn_WFP. */ +#define BS_I2S_RFRn_WFP (4U) /*!< Bit field size in bits for I2S_RFRn_WFP. */ + +/*! @brief Read current value of the I2S_RFRn_WFP field. */ +#define BR_I2S_RFRn_WFP(x, n) (HW_I2S_RFRn(x, n).B.WFP) +/*@}*/ + +/******************************************************************************* + * HW_I2S_RMR - SAI Receive Mask Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_RMR - SAI Receive Mask Register (RW) + * + * Reset value: 0x00000000U + * + * This register is double-buffered and updates: When RCSR[RE] is first set At + * the end of each frame This allows the masked words in each frame to change from + * frame to frame. + */ +typedef union _hw_i2s_rmr +{ + uint32_t U; + struct _hw_i2s_rmr_bitfields + { + uint32_t RWM : 16; /*!< [15:0] Receive Word Mask */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_i2s_rmr_t; + +/*! + * @name Constants and macros for entire I2S_RMR register + */ +/*@{*/ +#define HW_I2S_RMR_ADDR(x) ((x) + 0xE0U) + +#define HW_I2S_RMR(x) (*(__IO hw_i2s_rmr_t *) HW_I2S_RMR_ADDR(x)) +#define HW_I2S_RMR_RD(x) (HW_I2S_RMR(x).U) +#define HW_I2S_RMR_WR(x, v) (HW_I2S_RMR(x).U = (v)) +#define HW_I2S_RMR_SET(x, v) (HW_I2S_RMR_WR(x, HW_I2S_RMR_RD(x) | (v))) +#define HW_I2S_RMR_CLR(x, v) (HW_I2S_RMR_WR(x, HW_I2S_RMR_RD(x) & ~(v))) +#define HW_I2S_RMR_TOG(x, v) (HW_I2S_RMR_WR(x, HW_I2S_RMR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_RMR bitfields + */ + +/*! + * @name Register I2S_RMR, field RWM[15:0] (RW) + * + * Configures whether the receive word is masked (received data ignored and not + * written to receive FIFO) for the corresponding word in the frame. + * + * Values: + * - 0 - Word N is enabled. + * - 1 - Word N is masked. + */ +/*@{*/ +#define BP_I2S_RMR_RWM (0U) /*!< Bit position for I2S_RMR_RWM. */ +#define BM_I2S_RMR_RWM (0x0000FFFFU) /*!< Bit mask for I2S_RMR_RWM. */ +#define BS_I2S_RMR_RWM (16U) /*!< Bit field size in bits for I2S_RMR_RWM. */ + +/*! @brief Read current value of the I2S_RMR_RWM field. */ +#define BR_I2S_RMR_RWM(x) (HW_I2S_RMR(x).B.RWM) + +/*! @brief Format value for bitfield I2S_RMR_RWM. */ +#define BF_I2S_RMR_RWM(v) ((uint32_t)((uint32_t)(v) << BP_I2S_RMR_RWM) & BM_I2S_RMR_RWM) + +/*! @brief Set the RWM field to a new value. */ +#define BW_I2S_RMR_RWM(x, v) (HW_I2S_RMR_WR(x, (HW_I2S_RMR_RD(x) & ~BM_I2S_RMR_RWM) | BF_I2S_RMR_RWM(v))) +/*@}*/ + +/******************************************************************************* + * HW_I2S_MCR - SAI MCLK Control Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_MCR - SAI MCLK Control Register (RW) + * + * Reset value: 0x00000000U + * + * The MCLK Control Register (MCR) controls the clock source and direction of + * the audio master clock. + */ +typedef union _hw_i2s_mcr +{ + uint32_t U; + struct _hw_i2s_mcr_bitfields + { + uint32_t RESERVED0 : 24; /*!< [23:0] */ + uint32_t MICS : 2; /*!< [25:24] MCLK Input Clock Select */ + uint32_t RESERVED1 : 4; /*!< [29:26] */ + uint32_t MOE : 1; /*!< [30] MCLK Output Enable */ + uint32_t DUF : 1; /*!< [31] Divider Update Flag */ + } B; +} hw_i2s_mcr_t; + +/*! + * @name Constants and macros for entire I2S_MCR register + */ +/*@{*/ +#define HW_I2S_MCR_ADDR(x) ((x) + 0x100U) + +#define HW_I2S_MCR(x) (*(__IO hw_i2s_mcr_t *) HW_I2S_MCR_ADDR(x)) +#define HW_I2S_MCR_RD(x) (HW_I2S_MCR(x).U) +#define HW_I2S_MCR_WR(x, v) (HW_I2S_MCR(x).U = (v)) +#define HW_I2S_MCR_SET(x, v) (HW_I2S_MCR_WR(x, HW_I2S_MCR_RD(x) | (v))) +#define HW_I2S_MCR_CLR(x, v) (HW_I2S_MCR_WR(x, HW_I2S_MCR_RD(x) & ~(v))) +#define HW_I2S_MCR_TOG(x, v) (HW_I2S_MCR_WR(x, HW_I2S_MCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_MCR bitfields + */ + +/*! + * @name Register I2S_MCR, field MICS[25:24] (RW) + * + * Selects the clock input to the MCLK divider. This field cannot be changed + * while the MCLK divider is enabled. See the chip configuration details for + * information about the connections to these inputs. + * + * Values: + * - 00 - MCLK divider input clock 0 selected. + * - 01 - MCLK divider input clock 1 selected. + * - 10 - MCLK divider input clock 2 selected. + * - 11 - MCLK divider input clock 3 selected. + */ +/*@{*/ +#define BP_I2S_MCR_MICS (24U) /*!< Bit position for I2S_MCR_MICS. */ +#define BM_I2S_MCR_MICS (0x03000000U) /*!< Bit mask for I2S_MCR_MICS. */ +#define BS_I2S_MCR_MICS (2U) /*!< Bit field size in bits for I2S_MCR_MICS. */ + +/*! @brief Read current value of the I2S_MCR_MICS field. */ +#define BR_I2S_MCR_MICS(x) (HW_I2S_MCR(x).B.MICS) + +/*! @brief Format value for bitfield I2S_MCR_MICS. */ +#define BF_I2S_MCR_MICS(v) ((uint32_t)((uint32_t)(v) << BP_I2S_MCR_MICS) & BM_I2S_MCR_MICS) + +/*! @brief Set the MICS field to a new value. */ +#define BW_I2S_MCR_MICS(x, v) (HW_I2S_MCR_WR(x, (HW_I2S_MCR_RD(x) & ~BM_I2S_MCR_MICS) | BF_I2S_MCR_MICS(v))) +/*@}*/ + +/*! + * @name Register I2S_MCR, field MOE[30] (RW) + * + * Enables the MCLK divider and configures the MCLK signal pin as an output. + * When software clears this field, it remains set until the MCLK divider is fully + * disabled. + * + * Values: + * - 0 - MCLK signal pin is configured as an input that bypasses the MCLK + * divider. + * - 1 - MCLK signal pin is configured as an output from the MCLK divider and + * the MCLK divider is enabled. + */ +/*@{*/ +#define BP_I2S_MCR_MOE (30U) /*!< Bit position for I2S_MCR_MOE. */ +#define BM_I2S_MCR_MOE (0x40000000U) /*!< Bit mask for I2S_MCR_MOE. */ +#define BS_I2S_MCR_MOE (1U) /*!< Bit field size in bits for I2S_MCR_MOE. */ + +/*! @brief Read current value of the I2S_MCR_MOE field. */ +#define BR_I2S_MCR_MOE(x) (BITBAND_ACCESS32(HW_I2S_MCR_ADDR(x), BP_I2S_MCR_MOE)) + +/*! @brief Format value for bitfield I2S_MCR_MOE. */ +#define BF_I2S_MCR_MOE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_MCR_MOE) & BM_I2S_MCR_MOE) + +/*! @brief Set the MOE field to a new value. */ +#define BW_I2S_MCR_MOE(x, v) (BITBAND_ACCESS32(HW_I2S_MCR_ADDR(x), BP_I2S_MCR_MOE) = (v)) +/*@}*/ + +/*! + * @name Register I2S_MCR, field DUF[31] (RO) + * + * Provides the status of on-the-fly updates to the MCLK divider ratio. + * + * Values: + * - 0 - MCLK divider ratio is not being updated currently. + * - 1 - MCLK divider ratio is updating on-the-fly. Further updates to the MCLK + * divider ratio are blocked while this flag remains set. + */ +/*@{*/ +#define BP_I2S_MCR_DUF (31U) /*!< Bit position for I2S_MCR_DUF. */ +#define BM_I2S_MCR_DUF (0x80000000U) /*!< Bit mask for I2S_MCR_DUF. */ +#define BS_I2S_MCR_DUF (1U) /*!< Bit field size in bits for I2S_MCR_DUF. */ + +/*! @brief Read current value of the I2S_MCR_DUF field. */ +#define BR_I2S_MCR_DUF(x) (BITBAND_ACCESS32(HW_I2S_MCR_ADDR(x), BP_I2S_MCR_DUF)) +/*@}*/ + +/******************************************************************************* + * HW_I2S_MDR - SAI MCLK Divide Register + ******************************************************************************/ + +/*! + * @brief HW_I2S_MDR - SAI MCLK Divide Register (RW) + * + * Reset value: 0x00000000U + * + * The MCLK Divide Register (MDR) configures the MCLK divide ratio. Although the + * MDR can be changed when the MCLK divider clock is enabled, additional writes + * to the MDR are blocked while MCR[DUF] is set. Writes to the MDR when the MCLK + * divided clock is disabled do not set MCR[DUF]. + */ +typedef union _hw_i2s_mdr +{ + uint32_t U; + struct _hw_i2s_mdr_bitfields + { + uint32_t DIVIDE : 12; /*!< [11:0] MCLK Divide */ + uint32_t FRACT : 8; /*!< [19:12] MCLK Fraction */ + uint32_t RESERVED0 : 12; /*!< [31:20] */ + } B; +} hw_i2s_mdr_t; + +/*! + * @name Constants and macros for entire I2S_MDR register + */ +/*@{*/ +#define HW_I2S_MDR_ADDR(x) ((x) + 0x104U) + +#define HW_I2S_MDR(x) (*(__IO hw_i2s_mdr_t *) HW_I2S_MDR_ADDR(x)) +#define HW_I2S_MDR_RD(x) (HW_I2S_MDR(x).U) +#define HW_I2S_MDR_WR(x, v) (HW_I2S_MDR(x).U = (v)) +#define HW_I2S_MDR_SET(x, v) (HW_I2S_MDR_WR(x, HW_I2S_MDR_RD(x) | (v))) +#define HW_I2S_MDR_CLR(x, v) (HW_I2S_MDR_WR(x, HW_I2S_MDR_RD(x) & ~(v))) +#define HW_I2S_MDR_TOG(x, v) (HW_I2S_MDR_WR(x, HW_I2S_MDR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual I2S_MDR bitfields + */ + +/*! + * @name Register I2S_MDR, field DIVIDE[11:0] (RW) + * + * Sets the MCLK divide ratio such that: MCLK output = MCLK input * ( (FRACT + + * 1) / (DIVIDE + 1) ). FRACT must be set equal or less than the value in the + * DIVIDE field. + */ +/*@{*/ +#define BP_I2S_MDR_DIVIDE (0U) /*!< Bit position for I2S_MDR_DIVIDE. */ +#define BM_I2S_MDR_DIVIDE (0x00000FFFU) /*!< Bit mask for I2S_MDR_DIVIDE. */ +#define BS_I2S_MDR_DIVIDE (12U) /*!< Bit field size in bits for I2S_MDR_DIVIDE. */ + +/*! @brief Read current value of the I2S_MDR_DIVIDE field. */ +#define BR_I2S_MDR_DIVIDE(x) (HW_I2S_MDR(x).B.DIVIDE) + +/*! @brief Format value for bitfield I2S_MDR_DIVIDE. */ +#define BF_I2S_MDR_DIVIDE(v) ((uint32_t)((uint32_t)(v) << BP_I2S_MDR_DIVIDE) & BM_I2S_MDR_DIVIDE) + +/*! @brief Set the DIVIDE field to a new value. */ +#define BW_I2S_MDR_DIVIDE(x, v) (HW_I2S_MDR_WR(x, (HW_I2S_MDR_RD(x) & ~BM_I2S_MDR_DIVIDE) | BF_I2S_MDR_DIVIDE(v))) +/*@}*/ + +/*! + * @name Register I2S_MDR, field FRACT[19:12] (RW) + * + * Sets the MCLK divide ratio such that: MCLK output = MCLK input * ( (FRACT + + * 1) / (DIVIDE + 1) ). FRACT must be set equal or less than the value in the + * DIVIDE field. + */ +/*@{*/ +#define BP_I2S_MDR_FRACT (12U) /*!< Bit position for I2S_MDR_FRACT. */ +#define BM_I2S_MDR_FRACT (0x000FF000U) /*!< Bit mask for I2S_MDR_FRACT. */ +#define BS_I2S_MDR_FRACT (8U) /*!< Bit field size in bits for I2S_MDR_FRACT. */ + +/*! @brief Read current value of the I2S_MDR_FRACT field. */ +#define BR_I2S_MDR_FRACT(x) (HW_I2S_MDR(x).B.FRACT) + +/*! @brief Format value for bitfield I2S_MDR_FRACT. */ +#define BF_I2S_MDR_FRACT(v) ((uint32_t)((uint32_t)(v) << BP_I2S_MDR_FRACT) & BM_I2S_MDR_FRACT) + +/*! @brief Set the FRACT field to a new value. */ +#define BW_I2S_MDR_FRACT(x, v) (HW_I2S_MDR_WR(x, (HW_I2S_MDR_RD(x) & ~BM_I2S_MDR_FRACT) | BF_I2S_MDR_FRACT(v))) +/*@}*/ + +/******************************************************************************* + * hw_i2s_t - module struct + ******************************************************************************/ +/*! + * @brief All I2S module registers. + */ +#pragma pack(1) +typedef struct _hw_i2s +{ + __IO hw_i2s_tcsr_t TCSR; /*!< [0x0] SAI Transmit Control Register */ + __IO hw_i2s_tcr1_t TCR1; /*!< [0x4] SAI Transmit Configuration 1 Register */ + __IO hw_i2s_tcr2_t TCR2; /*!< [0x8] SAI Transmit Configuration 2 Register */ + __IO hw_i2s_tcr3_t TCR3; /*!< [0xC] SAI Transmit Configuration 3 Register */ + __IO hw_i2s_tcr4_t TCR4; /*!< [0x10] SAI Transmit Configuration 4 Register */ + __IO hw_i2s_tcr5_t TCR5; /*!< [0x14] SAI Transmit Configuration 5 Register */ + uint8_t _reserved0[8]; + __O hw_i2s_tdrn_t TDRn[1]; /*!< [0x20] SAI Transmit Data Register */ + uint8_t _reserved1[28]; + __I hw_i2s_tfrn_t TFRn[1]; /*!< [0x40] SAI Transmit FIFO Register */ + uint8_t _reserved2[28]; + __IO hw_i2s_tmr_t TMR; /*!< [0x60] SAI Transmit Mask Register */ + uint8_t _reserved3[28]; + __IO hw_i2s_rcsr_t RCSR; /*!< [0x80] SAI Receive Control Register */ + __IO hw_i2s_rcr1_t RCR1; /*!< [0x84] SAI Receive Configuration 1 Register */ + __IO hw_i2s_rcr2_t RCR2; /*!< [0x88] SAI Receive Configuration 2 Register */ + __IO hw_i2s_rcr3_t RCR3; /*!< [0x8C] SAI Receive Configuration 3 Register */ + __IO hw_i2s_rcr4_t RCR4; /*!< [0x90] SAI Receive Configuration 4 Register */ + __IO hw_i2s_rcr5_t RCR5; /*!< [0x94] SAI Receive Configuration 5 Register */ + uint8_t _reserved4[8]; + __I hw_i2s_rdrn_t RDRn[1]; /*!< [0xA0] SAI Receive Data Register */ + uint8_t _reserved5[28]; + __I hw_i2s_rfrn_t RFRn[1]; /*!< [0xC0] SAI Receive FIFO Register */ + uint8_t _reserved6[28]; + __IO hw_i2s_rmr_t RMR; /*!< [0xE0] SAI Receive Mask Register */ + uint8_t _reserved7[28]; + __IO hw_i2s_mcr_t MCR; /*!< [0x100] SAI MCLK Control Register */ + __IO hw_i2s_mdr_t MDR; /*!< [0x104] SAI MCLK Divide Register */ +} hw_i2s_t; +#pragma pack() + +/*! @brief Macro to access all I2S registers. */ +/*! @param x I2S module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_I2S(I2S0_BASE)</code>. */ +#define HW_I2S(x) (*(hw_i2s_t *)(x)) + +#endif /* __HW_I2S_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_llwu.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_llwu.h new file mode 100644 index 0000000000..2cba21397c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_llwu.h @@ -0,0 +1,1950 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_LLWU_REGISTERS_H__ +#define __HW_LLWU_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 LLWU + * + * Low leakage wakeup unit + * + * Registers defined in this header file: + * - HW_LLWU_PE1 - LLWU Pin Enable 1 register + * - HW_LLWU_PE2 - LLWU Pin Enable 2 register + * - HW_LLWU_PE3 - LLWU Pin Enable 3 register + * - HW_LLWU_PE4 - LLWU Pin Enable 4 register + * - HW_LLWU_ME - LLWU Module Enable register + * - HW_LLWU_F1 - LLWU Flag 1 register + * - HW_LLWU_F2 - LLWU Flag 2 register + * - HW_LLWU_F3 - LLWU Flag 3 register + * - HW_LLWU_FILT1 - LLWU Pin Filter 1 register + * - HW_LLWU_FILT2 - LLWU Pin Filter 2 register + * + * - hw_llwu_t - Struct containing all module registers. + */ + +#define HW_LLWU_INSTANCE_COUNT (1U) /*!< Number of instances of the LLWU module. */ + +/******************************************************************************* + * HW_LLWU_PE1 - LLWU Pin Enable 1 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_PE1 - LLWU Pin Enable 1 register (RW) + * + * Reset value: 0x00U + * + * LLWU_PE1 contains the field to enable and select the edge detect type for the + * external wakeup input pins LLWU_P3-LLWU_P0. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control Module + * (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_pe1 +{ + uint8_t U; + struct _hw_llwu_pe1_bitfields + { + uint8_t WUPE0 : 2; /*!< [1:0] Wakeup Pin Enable For LLWU_P0 */ + uint8_t WUPE1 : 2; /*!< [3:2] Wakeup Pin Enable For LLWU_P1 */ + uint8_t WUPE2 : 2; /*!< [5:4] Wakeup Pin Enable For LLWU_P2 */ + uint8_t WUPE3 : 2; /*!< [7:6] Wakeup Pin Enable For LLWU_P3 */ + } B; +} hw_llwu_pe1_t; + +/*! + * @name Constants and macros for entire LLWU_PE1 register + */ +/*@{*/ +#define HW_LLWU_PE1_ADDR(x) ((x) + 0x0U) + +#define HW_LLWU_PE1(x) (*(__IO hw_llwu_pe1_t *) HW_LLWU_PE1_ADDR(x)) +#define HW_LLWU_PE1_RD(x) (HW_LLWU_PE1(x).U) +#define HW_LLWU_PE1_WR(x, v) (HW_LLWU_PE1(x).U = (v)) +#define HW_LLWU_PE1_SET(x, v) (HW_LLWU_PE1_WR(x, HW_LLWU_PE1_RD(x) | (v))) +#define HW_LLWU_PE1_CLR(x, v) (HW_LLWU_PE1_WR(x, HW_LLWU_PE1_RD(x) & ~(v))) +#define HW_LLWU_PE1_TOG(x, v) (HW_LLWU_PE1_WR(x, HW_LLWU_PE1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_PE1 bitfields + */ + +/*! + * @name Register LLWU_PE1, field WUPE0[1:0] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE1_WUPE0 (0U) /*!< Bit position for LLWU_PE1_WUPE0. */ +#define BM_LLWU_PE1_WUPE0 (0x03U) /*!< Bit mask for LLWU_PE1_WUPE0. */ +#define BS_LLWU_PE1_WUPE0 (2U) /*!< Bit field size in bits for LLWU_PE1_WUPE0. */ + +/*! @brief Read current value of the LLWU_PE1_WUPE0 field. */ +#define BR_LLWU_PE1_WUPE0(x) (HW_LLWU_PE1(x).B.WUPE0) + +/*! @brief Format value for bitfield LLWU_PE1_WUPE0. */ +#define BF_LLWU_PE1_WUPE0(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE1_WUPE0) & BM_LLWU_PE1_WUPE0) + +/*! @brief Set the WUPE0 field to a new value. */ +#define BW_LLWU_PE1_WUPE0(x, v) (HW_LLWU_PE1_WR(x, (HW_LLWU_PE1_RD(x) & ~BM_LLWU_PE1_WUPE0) | BF_LLWU_PE1_WUPE0(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE1, field WUPE1[3:2] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE1_WUPE1 (2U) /*!< Bit position for LLWU_PE1_WUPE1. */ +#define BM_LLWU_PE1_WUPE1 (0x0CU) /*!< Bit mask for LLWU_PE1_WUPE1. */ +#define BS_LLWU_PE1_WUPE1 (2U) /*!< Bit field size in bits for LLWU_PE1_WUPE1. */ + +/*! @brief Read current value of the LLWU_PE1_WUPE1 field. */ +#define BR_LLWU_PE1_WUPE1(x) (HW_LLWU_PE1(x).B.WUPE1) + +/*! @brief Format value for bitfield LLWU_PE1_WUPE1. */ +#define BF_LLWU_PE1_WUPE1(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE1_WUPE1) & BM_LLWU_PE1_WUPE1) + +/*! @brief Set the WUPE1 field to a new value. */ +#define BW_LLWU_PE1_WUPE1(x, v) (HW_LLWU_PE1_WR(x, (HW_LLWU_PE1_RD(x) & ~BM_LLWU_PE1_WUPE1) | BF_LLWU_PE1_WUPE1(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE1, field WUPE2[5:4] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE1_WUPE2 (4U) /*!< Bit position for LLWU_PE1_WUPE2. */ +#define BM_LLWU_PE1_WUPE2 (0x30U) /*!< Bit mask for LLWU_PE1_WUPE2. */ +#define BS_LLWU_PE1_WUPE2 (2U) /*!< Bit field size in bits for LLWU_PE1_WUPE2. */ + +/*! @brief Read current value of the LLWU_PE1_WUPE2 field. */ +#define BR_LLWU_PE1_WUPE2(x) (HW_LLWU_PE1(x).B.WUPE2) + +/*! @brief Format value for bitfield LLWU_PE1_WUPE2. */ +#define BF_LLWU_PE1_WUPE2(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE1_WUPE2) & BM_LLWU_PE1_WUPE2) + +/*! @brief Set the WUPE2 field to a new value. */ +#define BW_LLWU_PE1_WUPE2(x, v) (HW_LLWU_PE1_WR(x, (HW_LLWU_PE1_RD(x) & ~BM_LLWU_PE1_WUPE2) | BF_LLWU_PE1_WUPE2(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE1, field WUPE3[7:6] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE1_WUPE3 (6U) /*!< Bit position for LLWU_PE1_WUPE3. */ +#define BM_LLWU_PE1_WUPE3 (0xC0U) /*!< Bit mask for LLWU_PE1_WUPE3. */ +#define BS_LLWU_PE1_WUPE3 (2U) /*!< Bit field size in bits for LLWU_PE1_WUPE3. */ + +/*! @brief Read current value of the LLWU_PE1_WUPE3 field. */ +#define BR_LLWU_PE1_WUPE3(x) (HW_LLWU_PE1(x).B.WUPE3) + +/*! @brief Format value for bitfield LLWU_PE1_WUPE3. */ +#define BF_LLWU_PE1_WUPE3(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE1_WUPE3) & BM_LLWU_PE1_WUPE3) + +/*! @brief Set the WUPE3 field to a new value. */ +#define BW_LLWU_PE1_WUPE3(x, v) (HW_LLWU_PE1_WR(x, (HW_LLWU_PE1_RD(x) & ~BM_LLWU_PE1_WUPE3) | BF_LLWU_PE1_WUPE3(v))) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_PE2 - LLWU Pin Enable 2 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_PE2 - LLWU Pin Enable 2 register (RW) + * + * Reset value: 0x00U + * + * LLWU_PE2 contains the field to enable and select the edge detect type for the + * external wakeup input pins LLWU_P7-LLWU_P4. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control Module + * (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_pe2 +{ + uint8_t U; + struct _hw_llwu_pe2_bitfields + { + uint8_t WUPE4 : 2; /*!< [1:0] Wakeup Pin Enable For LLWU_P4 */ + uint8_t WUPE5 : 2; /*!< [3:2] Wakeup Pin Enable For LLWU_P5 */ + uint8_t WUPE6 : 2; /*!< [5:4] Wakeup Pin Enable For LLWU_P6 */ + uint8_t WUPE7 : 2; /*!< [7:6] Wakeup Pin Enable For LLWU_P7 */ + } B; +} hw_llwu_pe2_t; + +/*! + * @name Constants and macros for entire LLWU_PE2 register + */ +/*@{*/ +#define HW_LLWU_PE2_ADDR(x) ((x) + 0x1U) + +#define HW_LLWU_PE2(x) (*(__IO hw_llwu_pe2_t *) HW_LLWU_PE2_ADDR(x)) +#define HW_LLWU_PE2_RD(x) (HW_LLWU_PE2(x).U) +#define HW_LLWU_PE2_WR(x, v) (HW_LLWU_PE2(x).U = (v)) +#define HW_LLWU_PE2_SET(x, v) (HW_LLWU_PE2_WR(x, HW_LLWU_PE2_RD(x) | (v))) +#define HW_LLWU_PE2_CLR(x, v) (HW_LLWU_PE2_WR(x, HW_LLWU_PE2_RD(x) & ~(v))) +#define HW_LLWU_PE2_TOG(x, v) (HW_LLWU_PE2_WR(x, HW_LLWU_PE2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_PE2 bitfields + */ + +/*! + * @name Register LLWU_PE2, field WUPE4[1:0] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE2_WUPE4 (0U) /*!< Bit position for LLWU_PE2_WUPE4. */ +#define BM_LLWU_PE2_WUPE4 (0x03U) /*!< Bit mask for LLWU_PE2_WUPE4. */ +#define BS_LLWU_PE2_WUPE4 (2U) /*!< Bit field size in bits for LLWU_PE2_WUPE4. */ + +/*! @brief Read current value of the LLWU_PE2_WUPE4 field. */ +#define BR_LLWU_PE2_WUPE4(x) (HW_LLWU_PE2(x).B.WUPE4) + +/*! @brief Format value for bitfield LLWU_PE2_WUPE4. */ +#define BF_LLWU_PE2_WUPE4(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE2_WUPE4) & BM_LLWU_PE2_WUPE4) + +/*! @brief Set the WUPE4 field to a new value. */ +#define BW_LLWU_PE2_WUPE4(x, v) (HW_LLWU_PE2_WR(x, (HW_LLWU_PE2_RD(x) & ~BM_LLWU_PE2_WUPE4) | BF_LLWU_PE2_WUPE4(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE2, field WUPE5[3:2] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE2_WUPE5 (2U) /*!< Bit position for LLWU_PE2_WUPE5. */ +#define BM_LLWU_PE2_WUPE5 (0x0CU) /*!< Bit mask for LLWU_PE2_WUPE5. */ +#define BS_LLWU_PE2_WUPE5 (2U) /*!< Bit field size in bits for LLWU_PE2_WUPE5. */ + +/*! @brief Read current value of the LLWU_PE2_WUPE5 field. */ +#define BR_LLWU_PE2_WUPE5(x) (HW_LLWU_PE2(x).B.WUPE5) + +/*! @brief Format value for bitfield LLWU_PE2_WUPE5. */ +#define BF_LLWU_PE2_WUPE5(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE2_WUPE5) & BM_LLWU_PE2_WUPE5) + +/*! @brief Set the WUPE5 field to a new value. */ +#define BW_LLWU_PE2_WUPE5(x, v) (HW_LLWU_PE2_WR(x, (HW_LLWU_PE2_RD(x) & ~BM_LLWU_PE2_WUPE5) | BF_LLWU_PE2_WUPE5(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE2, field WUPE6[5:4] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE2_WUPE6 (4U) /*!< Bit position for LLWU_PE2_WUPE6. */ +#define BM_LLWU_PE2_WUPE6 (0x30U) /*!< Bit mask for LLWU_PE2_WUPE6. */ +#define BS_LLWU_PE2_WUPE6 (2U) /*!< Bit field size in bits for LLWU_PE2_WUPE6. */ + +/*! @brief Read current value of the LLWU_PE2_WUPE6 field. */ +#define BR_LLWU_PE2_WUPE6(x) (HW_LLWU_PE2(x).B.WUPE6) + +/*! @brief Format value for bitfield LLWU_PE2_WUPE6. */ +#define BF_LLWU_PE2_WUPE6(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE2_WUPE6) & BM_LLWU_PE2_WUPE6) + +/*! @brief Set the WUPE6 field to a new value. */ +#define BW_LLWU_PE2_WUPE6(x, v) (HW_LLWU_PE2_WR(x, (HW_LLWU_PE2_RD(x) & ~BM_LLWU_PE2_WUPE6) | BF_LLWU_PE2_WUPE6(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE2, field WUPE7[7:6] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE2_WUPE7 (6U) /*!< Bit position for LLWU_PE2_WUPE7. */ +#define BM_LLWU_PE2_WUPE7 (0xC0U) /*!< Bit mask for LLWU_PE2_WUPE7. */ +#define BS_LLWU_PE2_WUPE7 (2U) /*!< Bit field size in bits for LLWU_PE2_WUPE7. */ + +/*! @brief Read current value of the LLWU_PE2_WUPE7 field. */ +#define BR_LLWU_PE2_WUPE7(x) (HW_LLWU_PE2(x).B.WUPE7) + +/*! @brief Format value for bitfield LLWU_PE2_WUPE7. */ +#define BF_LLWU_PE2_WUPE7(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE2_WUPE7) & BM_LLWU_PE2_WUPE7) + +/*! @brief Set the WUPE7 field to a new value. */ +#define BW_LLWU_PE2_WUPE7(x, v) (HW_LLWU_PE2_WR(x, (HW_LLWU_PE2_RD(x) & ~BM_LLWU_PE2_WUPE7) | BF_LLWU_PE2_WUPE7(v))) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_PE3 - LLWU Pin Enable 3 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_PE3 - LLWU Pin Enable 3 register (RW) + * + * Reset value: 0x00U + * + * LLWU_PE3 contains the field to enable and select the edge detect type for the + * external wakeup input pins LLWU_P11-LLWU_P8. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control Module + * (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_pe3 +{ + uint8_t U; + struct _hw_llwu_pe3_bitfields + { + uint8_t WUPE8 : 2; /*!< [1:0] Wakeup Pin Enable For LLWU_P8 */ + uint8_t WUPE9 : 2; /*!< [3:2] Wakeup Pin Enable For LLWU_P9 */ + uint8_t WUPE10 : 2; /*!< [5:4] Wakeup Pin Enable For LLWU_P10 */ + uint8_t WUPE11 : 2; /*!< [7:6] Wakeup Pin Enable For LLWU_P11 */ + } B; +} hw_llwu_pe3_t; + +/*! + * @name Constants and macros for entire LLWU_PE3 register + */ +/*@{*/ +#define HW_LLWU_PE3_ADDR(x) ((x) + 0x2U) + +#define HW_LLWU_PE3(x) (*(__IO hw_llwu_pe3_t *) HW_LLWU_PE3_ADDR(x)) +#define HW_LLWU_PE3_RD(x) (HW_LLWU_PE3(x).U) +#define HW_LLWU_PE3_WR(x, v) (HW_LLWU_PE3(x).U = (v)) +#define HW_LLWU_PE3_SET(x, v) (HW_LLWU_PE3_WR(x, HW_LLWU_PE3_RD(x) | (v))) +#define HW_LLWU_PE3_CLR(x, v) (HW_LLWU_PE3_WR(x, HW_LLWU_PE3_RD(x) & ~(v))) +#define HW_LLWU_PE3_TOG(x, v) (HW_LLWU_PE3_WR(x, HW_LLWU_PE3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_PE3 bitfields + */ + +/*! + * @name Register LLWU_PE3, field WUPE8[1:0] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE3_WUPE8 (0U) /*!< Bit position for LLWU_PE3_WUPE8. */ +#define BM_LLWU_PE3_WUPE8 (0x03U) /*!< Bit mask for LLWU_PE3_WUPE8. */ +#define BS_LLWU_PE3_WUPE8 (2U) /*!< Bit field size in bits for LLWU_PE3_WUPE8. */ + +/*! @brief Read current value of the LLWU_PE3_WUPE8 field. */ +#define BR_LLWU_PE3_WUPE8(x) (HW_LLWU_PE3(x).B.WUPE8) + +/*! @brief Format value for bitfield LLWU_PE3_WUPE8. */ +#define BF_LLWU_PE3_WUPE8(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE3_WUPE8) & BM_LLWU_PE3_WUPE8) + +/*! @brief Set the WUPE8 field to a new value. */ +#define BW_LLWU_PE3_WUPE8(x, v) (HW_LLWU_PE3_WR(x, (HW_LLWU_PE3_RD(x) & ~BM_LLWU_PE3_WUPE8) | BF_LLWU_PE3_WUPE8(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE3, field WUPE9[3:2] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE3_WUPE9 (2U) /*!< Bit position for LLWU_PE3_WUPE9. */ +#define BM_LLWU_PE3_WUPE9 (0x0CU) /*!< Bit mask for LLWU_PE3_WUPE9. */ +#define BS_LLWU_PE3_WUPE9 (2U) /*!< Bit field size in bits for LLWU_PE3_WUPE9. */ + +/*! @brief Read current value of the LLWU_PE3_WUPE9 field. */ +#define BR_LLWU_PE3_WUPE9(x) (HW_LLWU_PE3(x).B.WUPE9) + +/*! @brief Format value for bitfield LLWU_PE3_WUPE9. */ +#define BF_LLWU_PE3_WUPE9(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE3_WUPE9) & BM_LLWU_PE3_WUPE9) + +/*! @brief Set the WUPE9 field to a new value. */ +#define BW_LLWU_PE3_WUPE9(x, v) (HW_LLWU_PE3_WR(x, (HW_LLWU_PE3_RD(x) & ~BM_LLWU_PE3_WUPE9) | BF_LLWU_PE3_WUPE9(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE3, field WUPE10[5:4] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE3_WUPE10 (4U) /*!< Bit position for LLWU_PE3_WUPE10. */ +#define BM_LLWU_PE3_WUPE10 (0x30U) /*!< Bit mask for LLWU_PE3_WUPE10. */ +#define BS_LLWU_PE3_WUPE10 (2U) /*!< Bit field size in bits for LLWU_PE3_WUPE10. */ + +/*! @brief Read current value of the LLWU_PE3_WUPE10 field. */ +#define BR_LLWU_PE3_WUPE10(x) (HW_LLWU_PE3(x).B.WUPE10) + +/*! @brief Format value for bitfield LLWU_PE3_WUPE10. */ +#define BF_LLWU_PE3_WUPE10(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE3_WUPE10) & BM_LLWU_PE3_WUPE10) + +/*! @brief Set the WUPE10 field to a new value. */ +#define BW_LLWU_PE3_WUPE10(x, v) (HW_LLWU_PE3_WR(x, (HW_LLWU_PE3_RD(x) & ~BM_LLWU_PE3_WUPE10) | BF_LLWU_PE3_WUPE10(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE3, field WUPE11[7:6] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE3_WUPE11 (6U) /*!< Bit position for LLWU_PE3_WUPE11. */ +#define BM_LLWU_PE3_WUPE11 (0xC0U) /*!< Bit mask for LLWU_PE3_WUPE11. */ +#define BS_LLWU_PE3_WUPE11 (2U) /*!< Bit field size in bits for LLWU_PE3_WUPE11. */ + +/*! @brief Read current value of the LLWU_PE3_WUPE11 field. */ +#define BR_LLWU_PE3_WUPE11(x) (HW_LLWU_PE3(x).B.WUPE11) + +/*! @brief Format value for bitfield LLWU_PE3_WUPE11. */ +#define BF_LLWU_PE3_WUPE11(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE3_WUPE11) & BM_LLWU_PE3_WUPE11) + +/*! @brief Set the WUPE11 field to a new value. */ +#define BW_LLWU_PE3_WUPE11(x, v) (HW_LLWU_PE3_WR(x, (HW_LLWU_PE3_RD(x) & ~BM_LLWU_PE3_WUPE11) | BF_LLWU_PE3_WUPE11(v))) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_PE4 - LLWU Pin Enable 4 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_PE4 - LLWU Pin Enable 4 register (RW) + * + * Reset value: 0x00U + * + * LLWU_PE4 contains the field to enable and select the edge detect type for the + * external wakeup input pins LLWU_P15-LLWU_P12. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control + * Module (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_pe4 +{ + uint8_t U; + struct _hw_llwu_pe4_bitfields + { + uint8_t WUPE12 : 2; /*!< [1:0] Wakeup Pin Enable For LLWU_P12 */ + uint8_t WUPE13 : 2; /*!< [3:2] Wakeup Pin Enable For LLWU_P13 */ + uint8_t WUPE14 : 2; /*!< [5:4] Wakeup Pin Enable For LLWU_P14 */ + uint8_t WUPE15 : 2; /*!< [7:6] Wakeup Pin Enable For LLWU_P15 */ + } B; +} hw_llwu_pe4_t; + +/*! + * @name Constants and macros for entire LLWU_PE4 register + */ +/*@{*/ +#define HW_LLWU_PE4_ADDR(x) ((x) + 0x3U) + +#define HW_LLWU_PE4(x) (*(__IO hw_llwu_pe4_t *) HW_LLWU_PE4_ADDR(x)) +#define HW_LLWU_PE4_RD(x) (HW_LLWU_PE4(x).U) +#define HW_LLWU_PE4_WR(x, v) (HW_LLWU_PE4(x).U = (v)) +#define HW_LLWU_PE4_SET(x, v) (HW_LLWU_PE4_WR(x, HW_LLWU_PE4_RD(x) | (v))) +#define HW_LLWU_PE4_CLR(x, v) (HW_LLWU_PE4_WR(x, HW_LLWU_PE4_RD(x) & ~(v))) +#define HW_LLWU_PE4_TOG(x, v) (HW_LLWU_PE4_WR(x, HW_LLWU_PE4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_PE4 bitfields + */ + +/*! + * @name Register LLWU_PE4, field WUPE12[1:0] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE4_WUPE12 (0U) /*!< Bit position for LLWU_PE4_WUPE12. */ +#define BM_LLWU_PE4_WUPE12 (0x03U) /*!< Bit mask for LLWU_PE4_WUPE12. */ +#define BS_LLWU_PE4_WUPE12 (2U) /*!< Bit field size in bits for LLWU_PE4_WUPE12. */ + +/*! @brief Read current value of the LLWU_PE4_WUPE12 field. */ +#define BR_LLWU_PE4_WUPE12(x) (HW_LLWU_PE4(x).B.WUPE12) + +/*! @brief Format value for bitfield LLWU_PE4_WUPE12. */ +#define BF_LLWU_PE4_WUPE12(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE4_WUPE12) & BM_LLWU_PE4_WUPE12) + +/*! @brief Set the WUPE12 field to a new value. */ +#define BW_LLWU_PE4_WUPE12(x, v) (HW_LLWU_PE4_WR(x, (HW_LLWU_PE4_RD(x) & ~BM_LLWU_PE4_WUPE12) | BF_LLWU_PE4_WUPE12(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE4, field WUPE13[3:2] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE4_WUPE13 (2U) /*!< Bit position for LLWU_PE4_WUPE13. */ +#define BM_LLWU_PE4_WUPE13 (0x0CU) /*!< Bit mask for LLWU_PE4_WUPE13. */ +#define BS_LLWU_PE4_WUPE13 (2U) /*!< Bit field size in bits for LLWU_PE4_WUPE13. */ + +/*! @brief Read current value of the LLWU_PE4_WUPE13 field. */ +#define BR_LLWU_PE4_WUPE13(x) (HW_LLWU_PE4(x).B.WUPE13) + +/*! @brief Format value for bitfield LLWU_PE4_WUPE13. */ +#define BF_LLWU_PE4_WUPE13(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE4_WUPE13) & BM_LLWU_PE4_WUPE13) + +/*! @brief Set the WUPE13 field to a new value. */ +#define BW_LLWU_PE4_WUPE13(x, v) (HW_LLWU_PE4_WR(x, (HW_LLWU_PE4_RD(x) & ~BM_LLWU_PE4_WUPE13) | BF_LLWU_PE4_WUPE13(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE4, field WUPE14[5:4] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE4_WUPE14 (4U) /*!< Bit position for LLWU_PE4_WUPE14. */ +#define BM_LLWU_PE4_WUPE14 (0x30U) /*!< Bit mask for LLWU_PE4_WUPE14. */ +#define BS_LLWU_PE4_WUPE14 (2U) /*!< Bit field size in bits for LLWU_PE4_WUPE14. */ + +/*! @brief Read current value of the LLWU_PE4_WUPE14 field. */ +#define BR_LLWU_PE4_WUPE14(x) (HW_LLWU_PE4(x).B.WUPE14) + +/*! @brief Format value for bitfield LLWU_PE4_WUPE14. */ +#define BF_LLWU_PE4_WUPE14(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE4_WUPE14) & BM_LLWU_PE4_WUPE14) + +/*! @brief Set the WUPE14 field to a new value. */ +#define BW_LLWU_PE4_WUPE14(x, v) (HW_LLWU_PE4_WR(x, (HW_LLWU_PE4_RD(x) & ~BM_LLWU_PE4_WUPE14) | BF_LLWU_PE4_WUPE14(v))) +/*@}*/ + +/*! + * @name Register LLWU_PE4, field WUPE15[7:6] (RW) + * + * Enables and configures the edge detection for the wakeup pin. + * + * Values: + * - 00 - External input pin disabled as wakeup input + * - 01 - External input pin enabled with rising edge detection + * - 10 - External input pin enabled with falling edge detection + * - 11 - External input pin enabled with any change detection + */ +/*@{*/ +#define BP_LLWU_PE4_WUPE15 (6U) /*!< Bit position for LLWU_PE4_WUPE15. */ +#define BM_LLWU_PE4_WUPE15 (0xC0U) /*!< Bit mask for LLWU_PE4_WUPE15. */ +#define BS_LLWU_PE4_WUPE15 (2U) /*!< Bit field size in bits for LLWU_PE4_WUPE15. */ + +/*! @brief Read current value of the LLWU_PE4_WUPE15 field. */ +#define BR_LLWU_PE4_WUPE15(x) (HW_LLWU_PE4(x).B.WUPE15) + +/*! @brief Format value for bitfield LLWU_PE4_WUPE15. */ +#define BF_LLWU_PE4_WUPE15(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_PE4_WUPE15) & BM_LLWU_PE4_WUPE15) + +/*! @brief Set the WUPE15 field to a new value. */ +#define BW_LLWU_PE4_WUPE15(x, v) (HW_LLWU_PE4_WR(x, (HW_LLWU_PE4_RD(x) & ~BM_LLWU_PE4_WUPE15) | BF_LLWU_PE4_WUPE15(v))) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_ME - LLWU Module Enable register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_ME - LLWU Module Enable register (RW) + * + * Reset value: 0x00U + * + * LLWU_ME contains the bits to enable the internal module flag as a wakeup + * input source for inputs MWUF7-MWUF0. This register is reset on Chip Reset not VLLS + * and by reset types that trigger Chip Reset not VLLS. It is unaffected by + * reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control Module (RCM). The + * RCM implements many of the reset functions for the chip. See the chip's reset + * chapter for more information. details for more information. + */ +typedef union _hw_llwu_me +{ + uint8_t U; + struct _hw_llwu_me_bitfields + { + uint8_t WUME0 : 1; /*!< [0] Wakeup Module Enable For Module 0 */ + uint8_t WUME1 : 1; /*!< [1] Wakeup Module Enable for Module 1 */ + uint8_t WUME2 : 1; /*!< [2] Wakeup Module Enable For Module 2 */ + uint8_t WUME3 : 1; /*!< [3] Wakeup Module Enable For Module 3 */ + uint8_t WUME4 : 1; /*!< [4] Wakeup Module Enable For Module 4 */ + uint8_t WUME5 : 1; /*!< [5] Wakeup Module Enable For Module 5 */ + uint8_t WUME6 : 1; /*!< [6] Wakeup Module Enable For Module 6 */ + uint8_t WUME7 : 1; /*!< [7] Wakeup Module Enable For Module 7 */ + } B; +} hw_llwu_me_t; + +/*! + * @name Constants and macros for entire LLWU_ME register + */ +/*@{*/ +#define HW_LLWU_ME_ADDR(x) ((x) + 0x4U) + +#define HW_LLWU_ME(x) (*(__IO hw_llwu_me_t *) HW_LLWU_ME_ADDR(x)) +#define HW_LLWU_ME_RD(x) (HW_LLWU_ME(x).U) +#define HW_LLWU_ME_WR(x, v) (HW_LLWU_ME(x).U = (v)) +#define HW_LLWU_ME_SET(x, v) (HW_LLWU_ME_WR(x, HW_LLWU_ME_RD(x) | (v))) +#define HW_LLWU_ME_CLR(x, v) (HW_LLWU_ME_WR(x, HW_LLWU_ME_RD(x) & ~(v))) +#define HW_LLWU_ME_TOG(x, v) (HW_LLWU_ME_WR(x, HW_LLWU_ME_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_ME bitfields + */ + +/*! + * @name Register LLWU_ME, field WUME0[0] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME0 (0U) /*!< Bit position for LLWU_ME_WUME0. */ +#define BM_LLWU_ME_WUME0 (0x01U) /*!< Bit mask for LLWU_ME_WUME0. */ +#define BS_LLWU_ME_WUME0 (1U) /*!< Bit field size in bits for LLWU_ME_WUME0. */ + +/*! @brief Read current value of the LLWU_ME_WUME0 field. */ +#define BR_LLWU_ME_WUME0(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME0)) + +/*! @brief Format value for bitfield LLWU_ME_WUME0. */ +#define BF_LLWU_ME_WUME0(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME0) & BM_LLWU_ME_WUME0) + +/*! @brief Set the WUME0 field to a new value. */ +#define BW_LLWU_ME_WUME0(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME0) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME1[1] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME1 (1U) /*!< Bit position for LLWU_ME_WUME1. */ +#define BM_LLWU_ME_WUME1 (0x02U) /*!< Bit mask for LLWU_ME_WUME1. */ +#define BS_LLWU_ME_WUME1 (1U) /*!< Bit field size in bits for LLWU_ME_WUME1. */ + +/*! @brief Read current value of the LLWU_ME_WUME1 field. */ +#define BR_LLWU_ME_WUME1(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME1)) + +/*! @brief Format value for bitfield LLWU_ME_WUME1. */ +#define BF_LLWU_ME_WUME1(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME1) & BM_LLWU_ME_WUME1) + +/*! @brief Set the WUME1 field to a new value. */ +#define BW_LLWU_ME_WUME1(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME1) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME2[2] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME2 (2U) /*!< Bit position for LLWU_ME_WUME2. */ +#define BM_LLWU_ME_WUME2 (0x04U) /*!< Bit mask for LLWU_ME_WUME2. */ +#define BS_LLWU_ME_WUME2 (1U) /*!< Bit field size in bits for LLWU_ME_WUME2. */ + +/*! @brief Read current value of the LLWU_ME_WUME2 field. */ +#define BR_LLWU_ME_WUME2(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME2)) + +/*! @brief Format value for bitfield LLWU_ME_WUME2. */ +#define BF_LLWU_ME_WUME2(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME2) & BM_LLWU_ME_WUME2) + +/*! @brief Set the WUME2 field to a new value. */ +#define BW_LLWU_ME_WUME2(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME2) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME3[3] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME3 (3U) /*!< Bit position for LLWU_ME_WUME3. */ +#define BM_LLWU_ME_WUME3 (0x08U) /*!< Bit mask for LLWU_ME_WUME3. */ +#define BS_LLWU_ME_WUME3 (1U) /*!< Bit field size in bits for LLWU_ME_WUME3. */ + +/*! @brief Read current value of the LLWU_ME_WUME3 field. */ +#define BR_LLWU_ME_WUME3(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME3)) + +/*! @brief Format value for bitfield LLWU_ME_WUME3. */ +#define BF_LLWU_ME_WUME3(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME3) & BM_LLWU_ME_WUME3) + +/*! @brief Set the WUME3 field to a new value. */ +#define BW_LLWU_ME_WUME3(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME3) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME4[4] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME4 (4U) /*!< Bit position for LLWU_ME_WUME4. */ +#define BM_LLWU_ME_WUME4 (0x10U) /*!< Bit mask for LLWU_ME_WUME4. */ +#define BS_LLWU_ME_WUME4 (1U) /*!< Bit field size in bits for LLWU_ME_WUME4. */ + +/*! @brief Read current value of the LLWU_ME_WUME4 field. */ +#define BR_LLWU_ME_WUME4(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME4)) + +/*! @brief Format value for bitfield LLWU_ME_WUME4. */ +#define BF_LLWU_ME_WUME4(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME4) & BM_LLWU_ME_WUME4) + +/*! @brief Set the WUME4 field to a new value. */ +#define BW_LLWU_ME_WUME4(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME4) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME5[5] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME5 (5U) /*!< Bit position for LLWU_ME_WUME5. */ +#define BM_LLWU_ME_WUME5 (0x20U) /*!< Bit mask for LLWU_ME_WUME5. */ +#define BS_LLWU_ME_WUME5 (1U) /*!< Bit field size in bits for LLWU_ME_WUME5. */ + +/*! @brief Read current value of the LLWU_ME_WUME5 field. */ +#define BR_LLWU_ME_WUME5(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME5)) + +/*! @brief Format value for bitfield LLWU_ME_WUME5. */ +#define BF_LLWU_ME_WUME5(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME5) & BM_LLWU_ME_WUME5) + +/*! @brief Set the WUME5 field to a new value. */ +#define BW_LLWU_ME_WUME5(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME5) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME6[6] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME6 (6U) /*!< Bit position for LLWU_ME_WUME6. */ +#define BM_LLWU_ME_WUME6 (0x40U) /*!< Bit mask for LLWU_ME_WUME6. */ +#define BS_LLWU_ME_WUME6 (1U) /*!< Bit field size in bits for LLWU_ME_WUME6. */ + +/*! @brief Read current value of the LLWU_ME_WUME6 field. */ +#define BR_LLWU_ME_WUME6(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME6)) + +/*! @brief Format value for bitfield LLWU_ME_WUME6. */ +#define BF_LLWU_ME_WUME6(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME6) & BM_LLWU_ME_WUME6) + +/*! @brief Set the WUME6 field to a new value. */ +#define BW_LLWU_ME_WUME6(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME6) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_ME, field WUME7[7] (RW) + * + * Enables an internal module as a wakeup source input. + * + * Values: + * - 0 - Internal module flag not used as wakeup source + * - 1 - Internal module flag used as wakeup source + */ +/*@{*/ +#define BP_LLWU_ME_WUME7 (7U) /*!< Bit position for LLWU_ME_WUME7. */ +#define BM_LLWU_ME_WUME7 (0x80U) /*!< Bit mask for LLWU_ME_WUME7. */ +#define BS_LLWU_ME_WUME7 (1U) /*!< Bit field size in bits for LLWU_ME_WUME7. */ + +/*! @brief Read current value of the LLWU_ME_WUME7 field. */ +#define BR_LLWU_ME_WUME7(x) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME7)) + +/*! @brief Format value for bitfield LLWU_ME_WUME7. */ +#define BF_LLWU_ME_WUME7(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_ME_WUME7) & BM_LLWU_ME_WUME7) + +/*! @brief Set the WUME7 field to a new value. */ +#define BW_LLWU_ME_WUME7(x, v) (BITBAND_ACCESS8(HW_LLWU_ME_ADDR(x), BP_LLWU_ME_WUME7) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_F1 - LLWU Flag 1 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_F1 - LLWU Flag 1 register (W1C) + * + * Reset value: 0x00U + * + * LLWU_F1 contains the wakeup flags indicating which wakeup source caused the + * MCU to exit LLS or VLLS mode. For LLS, this is the source causing the CPU + * interrupt flow. For VLLS, this is the source causing the MCU reset flow. The + * external wakeup flags are read-only and clearing a flag is accomplished by a write + * of a 1 to the corresponding WUFx bit. The wakeup flag (WUFx), if set, will + * remain set if the associated WUPEx bit is cleared. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control + * Module (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_f1 +{ + uint8_t U; + struct _hw_llwu_f1_bitfields + { + uint8_t WUF0 : 1; /*!< [0] Wakeup Flag For LLWU_P0 */ + uint8_t WUF1 : 1; /*!< [1] Wakeup Flag For LLWU_P1 */ + uint8_t WUF2 : 1; /*!< [2] Wakeup Flag For LLWU_P2 */ + uint8_t WUF3 : 1; /*!< [3] Wakeup Flag For LLWU_P3 */ + uint8_t WUF4 : 1; /*!< [4] Wakeup Flag For LLWU_P4 */ + uint8_t WUF5 : 1; /*!< [5] Wakeup Flag For LLWU_P5 */ + uint8_t WUF6 : 1; /*!< [6] Wakeup Flag For LLWU_P6 */ + uint8_t WUF7 : 1; /*!< [7] Wakeup Flag For LLWU_P7 */ + } B; +} hw_llwu_f1_t; + +/*! + * @name Constants and macros for entire LLWU_F1 register + */ +/*@{*/ +#define HW_LLWU_F1_ADDR(x) ((x) + 0x5U) + +#define HW_LLWU_F1(x) (*(__IO hw_llwu_f1_t *) HW_LLWU_F1_ADDR(x)) +#define HW_LLWU_F1_RD(x) (HW_LLWU_F1(x).U) +#define HW_LLWU_F1_WR(x, v) (HW_LLWU_F1(x).U = (v)) +#define HW_LLWU_F1_SET(x, v) (HW_LLWU_F1_WR(x, HW_LLWU_F1_RD(x) | (v))) +#define HW_LLWU_F1_CLR(x, v) (HW_LLWU_F1_WR(x, HW_LLWU_F1_RD(x) & ~(v))) +#define HW_LLWU_F1_TOG(x, v) (HW_LLWU_F1_WR(x, HW_LLWU_F1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_F1 bitfields + */ + +/*! + * @name Register LLWU_F1, field WUF0[0] (W1C) + * + * Indicates that an enabled external wake-up pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF0. + * + * Values: + * - 0 - LLWU_P0 input was not a wakeup source + * - 1 - LLWU_P0 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF0 (0U) /*!< Bit position for LLWU_F1_WUF0. */ +#define BM_LLWU_F1_WUF0 (0x01U) /*!< Bit mask for LLWU_F1_WUF0. */ +#define BS_LLWU_F1_WUF0 (1U) /*!< Bit field size in bits for LLWU_F1_WUF0. */ + +/*! @brief Read current value of the LLWU_F1_WUF0 field. */ +#define BR_LLWU_F1_WUF0(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF0)) + +/*! @brief Format value for bitfield LLWU_F1_WUF0. */ +#define BF_LLWU_F1_WUF0(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF0) & BM_LLWU_F1_WUF0) + +/*! @brief Set the WUF0 field to a new value. */ +#define BW_LLWU_F1_WUF0(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF0) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF1[1] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF1. + * + * Values: + * - 0 - LLWU_P1 input was not a wakeup source + * - 1 - LLWU_P1 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF1 (1U) /*!< Bit position for LLWU_F1_WUF1. */ +#define BM_LLWU_F1_WUF1 (0x02U) /*!< Bit mask for LLWU_F1_WUF1. */ +#define BS_LLWU_F1_WUF1 (1U) /*!< Bit field size in bits for LLWU_F1_WUF1. */ + +/*! @brief Read current value of the LLWU_F1_WUF1 field. */ +#define BR_LLWU_F1_WUF1(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF1)) + +/*! @brief Format value for bitfield LLWU_F1_WUF1. */ +#define BF_LLWU_F1_WUF1(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF1) & BM_LLWU_F1_WUF1) + +/*! @brief Set the WUF1 field to a new value. */ +#define BW_LLWU_F1_WUF1(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF1) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF2[2] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF2. + * + * Values: + * - 0 - LLWU_P2 input was not a wakeup source + * - 1 - LLWU_P2 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF2 (2U) /*!< Bit position for LLWU_F1_WUF2. */ +#define BM_LLWU_F1_WUF2 (0x04U) /*!< Bit mask for LLWU_F1_WUF2. */ +#define BS_LLWU_F1_WUF2 (1U) /*!< Bit field size in bits for LLWU_F1_WUF2. */ + +/*! @brief Read current value of the LLWU_F1_WUF2 field. */ +#define BR_LLWU_F1_WUF2(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF2)) + +/*! @brief Format value for bitfield LLWU_F1_WUF2. */ +#define BF_LLWU_F1_WUF2(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF2) & BM_LLWU_F1_WUF2) + +/*! @brief Set the WUF2 field to a new value. */ +#define BW_LLWU_F1_WUF2(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF2) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF3[3] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF3. + * + * Values: + * - 0 - LLWU_P3 input was not a wake-up source + * - 1 - LLWU_P3 input was a wake-up source + */ +/*@{*/ +#define BP_LLWU_F1_WUF3 (3U) /*!< Bit position for LLWU_F1_WUF3. */ +#define BM_LLWU_F1_WUF3 (0x08U) /*!< Bit mask for LLWU_F1_WUF3. */ +#define BS_LLWU_F1_WUF3 (1U) /*!< Bit field size in bits for LLWU_F1_WUF3. */ + +/*! @brief Read current value of the LLWU_F1_WUF3 field. */ +#define BR_LLWU_F1_WUF3(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF3)) + +/*! @brief Format value for bitfield LLWU_F1_WUF3. */ +#define BF_LLWU_F1_WUF3(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF3) & BM_LLWU_F1_WUF3) + +/*! @brief Set the WUF3 field to a new value. */ +#define BW_LLWU_F1_WUF3(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF3) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF4[4] (W1C) + * + * Indicates that an enabled external wake-up pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF4. + * + * Values: + * - 0 - LLWU_P4 input was not a wakeup source + * - 1 - LLWU_P4 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF4 (4U) /*!< Bit position for LLWU_F1_WUF4. */ +#define BM_LLWU_F1_WUF4 (0x10U) /*!< Bit mask for LLWU_F1_WUF4. */ +#define BS_LLWU_F1_WUF4 (1U) /*!< Bit field size in bits for LLWU_F1_WUF4. */ + +/*! @brief Read current value of the LLWU_F1_WUF4 field. */ +#define BR_LLWU_F1_WUF4(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF4)) + +/*! @brief Format value for bitfield LLWU_F1_WUF4. */ +#define BF_LLWU_F1_WUF4(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF4) & BM_LLWU_F1_WUF4) + +/*! @brief Set the WUF4 field to a new value. */ +#define BW_LLWU_F1_WUF4(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF4) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF5[5] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF5. + * + * Values: + * - 0 - LLWU_P5 input was not a wakeup source + * - 1 - LLWU_P5 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF5 (5U) /*!< Bit position for LLWU_F1_WUF5. */ +#define BM_LLWU_F1_WUF5 (0x20U) /*!< Bit mask for LLWU_F1_WUF5. */ +#define BS_LLWU_F1_WUF5 (1U) /*!< Bit field size in bits for LLWU_F1_WUF5. */ + +/*! @brief Read current value of the LLWU_F1_WUF5 field. */ +#define BR_LLWU_F1_WUF5(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF5)) + +/*! @brief Format value for bitfield LLWU_F1_WUF5. */ +#define BF_LLWU_F1_WUF5(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF5) & BM_LLWU_F1_WUF5) + +/*! @brief Set the WUF5 field to a new value. */ +#define BW_LLWU_F1_WUF5(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF5) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF6[6] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF6. + * + * Values: + * - 0 - LLWU_P6 input was not a wakeup source + * - 1 - LLWU_P6 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF6 (6U) /*!< Bit position for LLWU_F1_WUF6. */ +#define BM_LLWU_F1_WUF6 (0x40U) /*!< Bit mask for LLWU_F1_WUF6. */ +#define BS_LLWU_F1_WUF6 (1U) /*!< Bit field size in bits for LLWU_F1_WUF6. */ + +/*! @brief Read current value of the LLWU_F1_WUF6 field. */ +#define BR_LLWU_F1_WUF6(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF6)) + +/*! @brief Format value for bitfield LLWU_F1_WUF6. */ +#define BF_LLWU_F1_WUF6(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF6) & BM_LLWU_F1_WUF6) + +/*! @brief Set the WUF6 field to a new value. */ +#define BW_LLWU_F1_WUF6(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF6) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F1, field WUF7[7] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF7. + * + * Values: + * - 0 - LLWU_P7 input was not a wakeup source + * - 1 - LLWU_P7 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F1_WUF7 (7U) /*!< Bit position for LLWU_F1_WUF7. */ +#define BM_LLWU_F1_WUF7 (0x80U) /*!< Bit mask for LLWU_F1_WUF7. */ +#define BS_LLWU_F1_WUF7 (1U) /*!< Bit field size in bits for LLWU_F1_WUF7. */ + +/*! @brief Read current value of the LLWU_F1_WUF7 field. */ +#define BR_LLWU_F1_WUF7(x) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF7)) + +/*! @brief Format value for bitfield LLWU_F1_WUF7. */ +#define BF_LLWU_F1_WUF7(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F1_WUF7) & BM_LLWU_F1_WUF7) + +/*! @brief Set the WUF7 field to a new value. */ +#define BW_LLWU_F1_WUF7(x, v) (BITBAND_ACCESS8(HW_LLWU_F1_ADDR(x), BP_LLWU_F1_WUF7) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_F2 - LLWU Flag 2 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_F2 - LLWU Flag 2 register (W1C) + * + * Reset value: 0x00U + * + * LLWU_F2 contains the wakeup flags indicating which wakeup source caused the + * MCU to exit LLS or VLLS mode. For LLS, this is the source causing the CPU + * interrupt flow. For VLLS, this is the source causing the MCU reset flow. The + * external wakeup flags are read-only and clearing a flag is accomplished by a write + * of a 1 to the corresponding WUFx bit. The wakeup flag (WUFx), if set, will + * remain set if the associated WUPEx bit is cleared. This register is reset on Chip + * Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control + * Module (RCM). The RCM implements many of the reset functions for the chip. See the + * chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_f2 +{ + uint8_t U; + struct _hw_llwu_f2_bitfields + { + uint8_t WUF8 : 1; /*!< [0] Wakeup Flag For LLWU_P8 */ + uint8_t WUF9 : 1; /*!< [1] Wakeup Flag For LLWU_P9 */ + uint8_t WUF10 : 1; /*!< [2] Wakeup Flag For LLWU_P10 */ + uint8_t WUF11 : 1; /*!< [3] Wakeup Flag For LLWU_P11 */ + uint8_t WUF12 : 1; /*!< [4] Wakeup Flag For LLWU_P12 */ + uint8_t WUF13 : 1; /*!< [5] Wakeup Flag For LLWU_P13 */ + uint8_t WUF14 : 1; /*!< [6] Wakeup Flag For LLWU_P14 */ + uint8_t WUF15 : 1; /*!< [7] Wakeup Flag For LLWU_P15 */ + } B; +} hw_llwu_f2_t; + +/*! + * @name Constants and macros for entire LLWU_F2 register + */ +/*@{*/ +#define HW_LLWU_F2_ADDR(x) ((x) + 0x6U) + +#define HW_LLWU_F2(x) (*(__IO hw_llwu_f2_t *) HW_LLWU_F2_ADDR(x)) +#define HW_LLWU_F2_RD(x) (HW_LLWU_F2(x).U) +#define HW_LLWU_F2_WR(x, v) (HW_LLWU_F2(x).U = (v)) +#define HW_LLWU_F2_SET(x, v) (HW_LLWU_F2_WR(x, HW_LLWU_F2_RD(x) | (v))) +#define HW_LLWU_F2_CLR(x, v) (HW_LLWU_F2_WR(x, HW_LLWU_F2_RD(x) & ~(v))) +#define HW_LLWU_F2_TOG(x, v) (HW_LLWU_F2_WR(x, HW_LLWU_F2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_F2 bitfields + */ + +/*! + * @name Register LLWU_F2, field WUF8[0] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF8. + * + * Values: + * - 0 - LLWU_P8 input was not a wakeup source + * - 1 - LLWU_P8 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF8 (0U) /*!< Bit position for LLWU_F2_WUF8. */ +#define BM_LLWU_F2_WUF8 (0x01U) /*!< Bit mask for LLWU_F2_WUF8. */ +#define BS_LLWU_F2_WUF8 (1U) /*!< Bit field size in bits for LLWU_F2_WUF8. */ + +/*! @brief Read current value of the LLWU_F2_WUF8 field. */ +#define BR_LLWU_F2_WUF8(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF8)) + +/*! @brief Format value for bitfield LLWU_F2_WUF8. */ +#define BF_LLWU_F2_WUF8(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF8) & BM_LLWU_F2_WUF8) + +/*! @brief Set the WUF8 field to a new value. */ +#define BW_LLWU_F2_WUF8(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF8) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF9[1] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF9. + * + * Values: + * - 0 - LLWU_P9 input was not a wakeup source + * - 1 - LLWU_P9 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF9 (1U) /*!< Bit position for LLWU_F2_WUF9. */ +#define BM_LLWU_F2_WUF9 (0x02U) /*!< Bit mask for LLWU_F2_WUF9. */ +#define BS_LLWU_F2_WUF9 (1U) /*!< Bit field size in bits for LLWU_F2_WUF9. */ + +/*! @brief Read current value of the LLWU_F2_WUF9 field. */ +#define BR_LLWU_F2_WUF9(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF9)) + +/*! @brief Format value for bitfield LLWU_F2_WUF9. */ +#define BF_LLWU_F2_WUF9(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF9) & BM_LLWU_F2_WUF9) + +/*! @brief Set the WUF9 field to a new value. */ +#define BW_LLWU_F2_WUF9(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF9) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF10[2] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF10. + * + * Values: + * - 0 - LLWU_P10 input was not a wakeup source + * - 1 - LLWU_P10 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF10 (2U) /*!< Bit position for LLWU_F2_WUF10. */ +#define BM_LLWU_F2_WUF10 (0x04U) /*!< Bit mask for LLWU_F2_WUF10. */ +#define BS_LLWU_F2_WUF10 (1U) /*!< Bit field size in bits for LLWU_F2_WUF10. */ + +/*! @brief Read current value of the LLWU_F2_WUF10 field. */ +#define BR_LLWU_F2_WUF10(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF10)) + +/*! @brief Format value for bitfield LLWU_F2_WUF10. */ +#define BF_LLWU_F2_WUF10(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF10) & BM_LLWU_F2_WUF10) + +/*! @brief Set the WUF10 field to a new value. */ +#define BW_LLWU_F2_WUF10(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF10) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF11[3] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF11. + * + * Values: + * - 0 - LLWU_P11 input was not a wakeup source + * - 1 - LLWU_P11 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF11 (3U) /*!< Bit position for LLWU_F2_WUF11. */ +#define BM_LLWU_F2_WUF11 (0x08U) /*!< Bit mask for LLWU_F2_WUF11. */ +#define BS_LLWU_F2_WUF11 (1U) /*!< Bit field size in bits for LLWU_F2_WUF11. */ + +/*! @brief Read current value of the LLWU_F2_WUF11 field. */ +#define BR_LLWU_F2_WUF11(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF11)) + +/*! @brief Format value for bitfield LLWU_F2_WUF11. */ +#define BF_LLWU_F2_WUF11(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF11) & BM_LLWU_F2_WUF11) + +/*! @brief Set the WUF11 field to a new value. */ +#define BW_LLWU_F2_WUF11(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF11) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF12[4] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF12. + * + * Values: + * - 0 - LLWU_P12 input was not a wakeup source + * - 1 - LLWU_P12 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF12 (4U) /*!< Bit position for LLWU_F2_WUF12. */ +#define BM_LLWU_F2_WUF12 (0x10U) /*!< Bit mask for LLWU_F2_WUF12. */ +#define BS_LLWU_F2_WUF12 (1U) /*!< Bit field size in bits for LLWU_F2_WUF12. */ + +/*! @brief Read current value of the LLWU_F2_WUF12 field. */ +#define BR_LLWU_F2_WUF12(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF12)) + +/*! @brief Format value for bitfield LLWU_F2_WUF12. */ +#define BF_LLWU_F2_WUF12(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF12) & BM_LLWU_F2_WUF12) + +/*! @brief Set the WUF12 field to a new value. */ +#define BW_LLWU_F2_WUF12(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF12) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF13[5] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF13. + * + * Values: + * - 0 - LLWU_P13 input was not a wakeup source + * - 1 - LLWU_P13 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF13 (5U) /*!< Bit position for LLWU_F2_WUF13. */ +#define BM_LLWU_F2_WUF13 (0x20U) /*!< Bit mask for LLWU_F2_WUF13. */ +#define BS_LLWU_F2_WUF13 (1U) /*!< Bit field size in bits for LLWU_F2_WUF13. */ + +/*! @brief Read current value of the LLWU_F2_WUF13 field. */ +#define BR_LLWU_F2_WUF13(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF13)) + +/*! @brief Format value for bitfield LLWU_F2_WUF13. */ +#define BF_LLWU_F2_WUF13(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF13) & BM_LLWU_F2_WUF13) + +/*! @brief Set the WUF13 field to a new value. */ +#define BW_LLWU_F2_WUF13(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF13) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF14[6] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF14. + * + * Values: + * - 0 - LLWU_P14 input was not a wakeup source + * - 1 - LLWU_P14 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF14 (6U) /*!< Bit position for LLWU_F2_WUF14. */ +#define BM_LLWU_F2_WUF14 (0x40U) /*!< Bit mask for LLWU_F2_WUF14. */ +#define BS_LLWU_F2_WUF14 (1U) /*!< Bit field size in bits for LLWU_F2_WUF14. */ + +/*! @brief Read current value of the LLWU_F2_WUF14 field. */ +#define BR_LLWU_F2_WUF14(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF14)) + +/*! @brief Format value for bitfield LLWU_F2_WUF14. */ +#define BF_LLWU_F2_WUF14(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF14) & BM_LLWU_F2_WUF14) + +/*! @brief Set the WUF14 field to a new value. */ +#define BW_LLWU_F2_WUF14(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF14) = (v)) +/*@}*/ + +/*! + * @name Register LLWU_F2, field WUF15[7] (W1C) + * + * Indicates that an enabled external wakeup pin was a source of exiting a + * low-leakage power mode. To clear the flag, write a 1 to WUF15. + * + * Values: + * - 0 - LLWU_P15 input was not a wakeup source + * - 1 - LLWU_P15 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F2_WUF15 (7U) /*!< Bit position for LLWU_F2_WUF15. */ +#define BM_LLWU_F2_WUF15 (0x80U) /*!< Bit mask for LLWU_F2_WUF15. */ +#define BS_LLWU_F2_WUF15 (1U) /*!< Bit field size in bits for LLWU_F2_WUF15. */ + +/*! @brief Read current value of the LLWU_F2_WUF15 field. */ +#define BR_LLWU_F2_WUF15(x) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF15)) + +/*! @brief Format value for bitfield LLWU_F2_WUF15. */ +#define BF_LLWU_F2_WUF15(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_F2_WUF15) & BM_LLWU_F2_WUF15) + +/*! @brief Set the WUF15 field to a new value. */ +#define BW_LLWU_F2_WUF15(x, v) (BITBAND_ACCESS8(HW_LLWU_F2_ADDR(x), BP_LLWU_F2_WUF15) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_F3 - LLWU Flag 3 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_F3 - LLWU Flag 3 register (RO) + * + * Reset value: 0x00U + * + * LLWU_F3 contains the wakeup flags indicating which internal wakeup source + * caused the MCU to exit LLS or VLLS mode. For LLS, this is the source causing the + * CPU interrupt flow. For VLLS, this is the source causing the MCU reset flow. + * For internal peripherals that are capable of running in a low-leakage power + * mode, such as a real time clock module or CMP module, the flag from the + * associated peripheral is accessible as the MWUFx bit. The flag will need to be cleared + * in the peripheral instead of writing a 1 to the MWUFx bit. This register is + * reset on Chip Reset not VLLS and by reset types that trigger Chip Reset not + * VLLS. It is unaffected by reset types that do not trigger Chip Reset not VLLS. See + * the IntroductionInformation found here describes the registers of the Reset + * Control Module (RCM). The RCM implements many of the reset functions for the + * chip. See the chip's reset chapter for more information. details for more + * information. + */ +typedef union _hw_llwu_f3 +{ + uint8_t U; + struct _hw_llwu_f3_bitfields + { + uint8_t MWUF0 : 1; /*!< [0] Wakeup flag For module 0 */ + uint8_t MWUF1 : 1; /*!< [1] Wakeup flag For module 1 */ + uint8_t MWUF2 : 1; /*!< [2] Wakeup flag For module 2 */ + uint8_t MWUF3 : 1; /*!< [3] Wakeup flag For module 3 */ + uint8_t MWUF4 : 1; /*!< [4] Wakeup flag For module 4 */ + uint8_t MWUF5 : 1; /*!< [5] Wakeup flag For module 5 */ + uint8_t MWUF6 : 1; /*!< [6] Wakeup flag For module 6 */ + uint8_t MWUF7 : 1; /*!< [7] Wakeup flag For module 7 */ + } B; +} hw_llwu_f3_t; + +/*! + * @name Constants and macros for entire LLWU_F3 register + */ +/*@{*/ +#define HW_LLWU_F3_ADDR(x) ((x) + 0x7U) + +#define HW_LLWU_F3(x) (*(__I hw_llwu_f3_t *) HW_LLWU_F3_ADDR(x)) +#define HW_LLWU_F3_RD(x) (HW_LLWU_F3(x).U) +/*@}*/ + +/* + * Constants & macros for individual LLWU_F3 bitfields + */ + +/*! + * @name Register LLWU_F3, field MWUF0[0] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 0 input was not a wakeup source + * - 1 - Module 0 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF0 (0U) /*!< Bit position for LLWU_F3_MWUF0. */ +#define BM_LLWU_F3_MWUF0 (0x01U) /*!< Bit mask for LLWU_F3_MWUF0. */ +#define BS_LLWU_F3_MWUF0 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF0. */ + +/*! @brief Read current value of the LLWU_F3_MWUF0 field. */ +#define BR_LLWU_F3_MWUF0(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF0)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF1[1] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 1 input was not a wakeup source + * - 1 - Module 1 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF1 (1U) /*!< Bit position for LLWU_F3_MWUF1. */ +#define BM_LLWU_F3_MWUF1 (0x02U) /*!< Bit mask for LLWU_F3_MWUF1. */ +#define BS_LLWU_F3_MWUF1 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF1. */ + +/*! @brief Read current value of the LLWU_F3_MWUF1 field. */ +#define BR_LLWU_F3_MWUF1(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF1)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF2[2] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 2 input was not a wakeup source + * - 1 - Module 2 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF2 (2U) /*!< Bit position for LLWU_F3_MWUF2. */ +#define BM_LLWU_F3_MWUF2 (0x04U) /*!< Bit mask for LLWU_F3_MWUF2. */ +#define BS_LLWU_F3_MWUF2 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF2. */ + +/*! @brief Read current value of the LLWU_F3_MWUF2 field. */ +#define BR_LLWU_F3_MWUF2(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF2)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF3[3] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 3 input was not a wakeup source + * - 1 - Module 3 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF3 (3U) /*!< Bit position for LLWU_F3_MWUF3. */ +#define BM_LLWU_F3_MWUF3 (0x08U) /*!< Bit mask for LLWU_F3_MWUF3. */ +#define BS_LLWU_F3_MWUF3 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF3. */ + +/*! @brief Read current value of the LLWU_F3_MWUF3 field. */ +#define BR_LLWU_F3_MWUF3(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF3)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF4[4] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 4 input was not a wakeup source + * - 1 - Module 4 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF4 (4U) /*!< Bit position for LLWU_F3_MWUF4. */ +#define BM_LLWU_F3_MWUF4 (0x10U) /*!< Bit mask for LLWU_F3_MWUF4. */ +#define BS_LLWU_F3_MWUF4 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF4. */ + +/*! @brief Read current value of the LLWU_F3_MWUF4 field. */ +#define BR_LLWU_F3_MWUF4(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF4)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF5[5] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 5 input was not a wakeup source + * - 1 - Module 5 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF5 (5U) /*!< Bit position for LLWU_F3_MWUF5. */ +#define BM_LLWU_F3_MWUF5 (0x20U) /*!< Bit mask for LLWU_F3_MWUF5. */ +#define BS_LLWU_F3_MWUF5 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF5. */ + +/*! @brief Read current value of the LLWU_F3_MWUF5 field. */ +#define BR_LLWU_F3_MWUF5(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF5)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF6[6] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 6 input was not a wakeup source + * - 1 - Module 6 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF6 (6U) /*!< Bit position for LLWU_F3_MWUF6. */ +#define BM_LLWU_F3_MWUF6 (0x40U) /*!< Bit mask for LLWU_F3_MWUF6. */ +#define BS_LLWU_F3_MWUF6 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF6. */ + +/*! @brief Read current value of the LLWU_F3_MWUF6 field. */ +#define BR_LLWU_F3_MWUF6(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF6)) +/*@}*/ + +/*! + * @name Register LLWU_F3, field MWUF7[7] (RO) + * + * Indicates that an enabled internal peripheral was a source of exiting a + * low-leakage power mode. To clear the flag, follow the internal peripheral flag + * clearing mechanism. + * + * Values: + * - 0 - Module 7 input was not a wakeup source + * - 1 - Module 7 input was a wakeup source + */ +/*@{*/ +#define BP_LLWU_F3_MWUF7 (7U) /*!< Bit position for LLWU_F3_MWUF7. */ +#define BM_LLWU_F3_MWUF7 (0x80U) /*!< Bit mask for LLWU_F3_MWUF7. */ +#define BS_LLWU_F3_MWUF7 (1U) /*!< Bit field size in bits for LLWU_F3_MWUF7. */ + +/*! @brief Read current value of the LLWU_F3_MWUF7 field. */ +#define BR_LLWU_F3_MWUF7(x) (BITBAND_ACCESS8(HW_LLWU_F3_ADDR(x), BP_LLWU_F3_MWUF7)) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_FILT1 - LLWU Pin Filter 1 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_FILT1 - LLWU Pin Filter 1 register (RW) + * + * Reset value: 0x00U + * + * LLWU_FILT1 is a control and status register that is used to enable/disable + * the digital filter 1 features for an external pin. This register is reset on + * Chip Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control + * Module (RCM). The RCM implements many of the reset functions for the chip. See + * the chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_filt1 +{ + uint8_t U; + struct _hw_llwu_filt1_bitfields + { + uint8_t FILTSEL : 4; /*!< [3:0] Filter Pin Select */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t FILTE : 2; /*!< [6:5] Digital Filter On External Pin */ + uint8_t FILTF : 1; /*!< [7] Filter Detect Flag */ + } B; +} hw_llwu_filt1_t; + +/*! + * @name Constants and macros for entire LLWU_FILT1 register + */ +/*@{*/ +#define HW_LLWU_FILT1_ADDR(x) ((x) + 0x8U) + +#define HW_LLWU_FILT1(x) (*(__IO hw_llwu_filt1_t *) HW_LLWU_FILT1_ADDR(x)) +#define HW_LLWU_FILT1_RD(x) (HW_LLWU_FILT1(x).U) +#define HW_LLWU_FILT1_WR(x, v) (HW_LLWU_FILT1(x).U = (v)) +#define HW_LLWU_FILT1_SET(x, v) (HW_LLWU_FILT1_WR(x, HW_LLWU_FILT1_RD(x) | (v))) +#define HW_LLWU_FILT1_CLR(x, v) (HW_LLWU_FILT1_WR(x, HW_LLWU_FILT1_RD(x) & ~(v))) +#define HW_LLWU_FILT1_TOG(x, v) (HW_LLWU_FILT1_WR(x, HW_LLWU_FILT1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_FILT1 bitfields + */ + +/*! + * @name Register LLWU_FILT1, field FILTSEL[3:0] (RW) + * + * Selects 1 out of the 16 wakeup pins to be muxed into the filter. + * + * Values: + * - 0000 - Select LLWU_P0 for filter + * - 1111 - Select LLWU_P15 for filter + */ +/*@{*/ +#define BP_LLWU_FILT1_FILTSEL (0U) /*!< Bit position for LLWU_FILT1_FILTSEL. */ +#define BM_LLWU_FILT1_FILTSEL (0x0FU) /*!< Bit mask for LLWU_FILT1_FILTSEL. */ +#define BS_LLWU_FILT1_FILTSEL (4U) /*!< Bit field size in bits for LLWU_FILT1_FILTSEL. */ + +/*! @brief Read current value of the LLWU_FILT1_FILTSEL field. */ +#define BR_LLWU_FILT1_FILTSEL(x) (HW_LLWU_FILT1(x).B.FILTSEL) + +/*! @brief Format value for bitfield LLWU_FILT1_FILTSEL. */ +#define BF_LLWU_FILT1_FILTSEL(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT1_FILTSEL) & BM_LLWU_FILT1_FILTSEL) + +/*! @brief Set the FILTSEL field to a new value. */ +#define BW_LLWU_FILT1_FILTSEL(x, v) (HW_LLWU_FILT1_WR(x, (HW_LLWU_FILT1_RD(x) & ~BM_LLWU_FILT1_FILTSEL) | BF_LLWU_FILT1_FILTSEL(v))) +/*@}*/ + +/*! + * @name Register LLWU_FILT1, field FILTE[6:5] (RW) + * + * Controls the digital filter options for the external pin detect. + * + * Values: + * - 00 - Filter disabled + * - 01 - Filter posedge detect enabled + * - 10 - Filter negedge detect enabled + * - 11 - Filter any edge detect enabled + */ +/*@{*/ +#define BP_LLWU_FILT1_FILTE (5U) /*!< Bit position for LLWU_FILT1_FILTE. */ +#define BM_LLWU_FILT1_FILTE (0x60U) /*!< Bit mask for LLWU_FILT1_FILTE. */ +#define BS_LLWU_FILT1_FILTE (2U) /*!< Bit field size in bits for LLWU_FILT1_FILTE. */ + +/*! @brief Read current value of the LLWU_FILT1_FILTE field. */ +#define BR_LLWU_FILT1_FILTE(x) (HW_LLWU_FILT1(x).B.FILTE) + +/*! @brief Format value for bitfield LLWU_FILT1_FILTE. */ +#define BF_LLWU_FILT1_FILTE(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT1_FILTE) & BM_LLWU_FILT1_FILTE) + +/*! @brief Set the FILTE field to a new value. */ +#define BW_LLWU_FILT1_FILTE(x, v) (HW_LLWU_FILT1_WR(x, (HW_LLWU_FILT1_RD(x) & ~BM_LLWU_FILT1_FILTE) | BF_LLWU_FILT1_FILTE(v))) +/*@}*/ + +/*! + * @name Register LLWU_FILT1, field FILTF[7] (W1C) + * + * Indicates that the filtered external wakeup pin, selected by FILTSEL, was a + * source of exiting a low-leakage power mode. To clear the flag write a one to + * FILTF. + * + * Values: + * - 0 - Pin Filter 1 was not a wakeup source + * - 1 - Pin Filter 1 was a wakeup source + */ +/*@{*/ +#define BP_LLWU_FILT1_FILTF (7U) /*!< Bit position for LLWU_FILT1_FILTF. */ +#define BM_LLWU_FILT1_FILTF (0x80U) /*!< Bit mask for LLWU_FILT1_FILTF. */ +#define BS_LLWU_FILT1_FILTF (1U) /*!< Bit field size in bits for LLWU_FILT1_FILTF. */ + +/*! @brief Read current value of the LLWU_FILT1_FILTF field. */ +#define BR_LLWU_FILT1_FILTF(x) (BITBAND_ACCESS8(HW_LLWU_FILT1_ADDR(x), BP_LLWU_FILT1_FILTF)) + +/*! @brief Format value for bitfield LLWU_FILT1_FILTF. */ +#define BF_LLWU_FILT1_FILTF(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT1_FILTF) & BM_LLWU_FILT1_FILTF) + +/*! @brief Set the FILTF field to a new value. */ +#define BW_LLWU_FILT1_FILTF(x, v) (BITBAND_ACCESS8(HW_LLWU_FILT1_ADDR(x), BP_LLWU_FILT1_FILTF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LLWU_FILT2 - LLWU Pin Filter 2 register + ******************************************************************************/ + +/*! + * @brief HW_LLWU_FILT2 - LLWU Pin Filter 2 register (RW) + * + * Reset value: 0x00U + * + * LLWU_FILT2 is a control and status register that is used to enable/disable + * the digital filter 2 features for an external pin. This register is reset on + * Chip Reset not VLLS and by reset types that trigger Chip Reset not VLLS. It is + * unaffected by reset types that do not trigger Chip Reset not VLLS. See the + * IntroductionInformation found here describes the registers of the Reset Control + * Module (RCM). The RCM implements many of the reset functions for the chip. See + * the chip's reset chapter for more information. details for more information. + */ +typedef union _hw_llwu_filt2 +{ + uint8_t U; + struct _hw_llwu_filt2_bitfields + { + uint8_t FILTSEL : 4; /*!< [3:0] Filter Pin Select */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t FILTE : 2; /*!< [6:5] Digital Filter On External Pin */ + uint8_t FILTF : 1; /*!< [7] Filter Detect Flag */ + } B; +} hw_llwu_filt2_t; + +/*! + * @name Constants and macros for entire LLWU_FILT2 register + */ +/*@{*/ +#define HW_LLWU_FILT2_ADDR(x) ((x) + 0x9U) + +#define HW_LLWU_FILT2(x) (*(__IO hw_llwu_filt2_t *) HW_LLWU_FILT2_ADDR(x)) +#define HW_LLWU_FILT2_RD(x) (HW_LLWU_FILT2(x).U) +#define HW_LLWU_FILT2_WR(x, v) (HW_LLWU_FILT2(x).U = (v)) +#define HW_LLWU_FILT2_SET(x, v) (HW_LLWU_FILT2_WR(x, HW_LLWU_FILT2_RD(x) | (v))) +#define HW_LLWU_FILT2_CLR(x, v) (HW_LLWU_FILT2_WR(x, HW_LLWU_FILT2_RD(x) & ~(v))) +#define HW_LLWU_FILT2_TOG(x, v) (HW_LLWU_FILT2_WR(x, HW_LLWU_FILT2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LLWU_FILT2 bitfields + */ + +/*! + * @name Register LLWU_FILT2, field FILTSEL[3:0] (RW) + * + * Selects 1 out of the 16 wakeup pins to be muxed into the filter. + * + * Values: + * - 0000 - Select LLWU_P0 for filter + * - 1111 - Select LLWU_P15 for filter + */ +/*@{*/ +#define BP_LLWU_FILT2_FILTSEL (0U) /*!< Bit position for LLWU_FILT2_FILTSEL. */ +#define BM_LLWU_FILT2_FILTSEL (0x0FU) /*!< Bit mask for LLWU_FILT2_FILTSEL. */ +#define BS_LLWU_FILT2_FILTSEL (4U) /*!< Bit field size in bits for LLWU_FILT2_FILTSEL. */ + +/*! @brief Read current value of the LLWU_FILT2_FILTSEL field. */ +#define BR_LLWU_FILT2_FILTSEL(x) (HW_LLWU_FILT2(x).B.FILTSEL) + +/*! @brief Format value for bitfield LLWU_FILT2_FILTSEL. */ +#define BF_LLWU_FILT2_FILTSEL(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT2_FILTSEL) & BM_LLWU_FILT2_FILTSEL) + +/*! @brief Set the FILTSEL field to a new value. */ +#define BW_LLWU_FILT2_FILTSEL(x, v) (HW_LLWU_FILT2_WR(x, (HW_LLWU_FILT2_RD(x) & ~BM_LLWU_FILT2_FILTSEL) | BF_LLWU_FILT2_FILTSEL(v))) +/*@}*/ + +/*! + * @name Register LLWU_FILT2, field FILTE[6:5] (RW) + * + * Controls the digital filter options for the external pin detect. + * + * Values: + * - 00 - Filter disabled + * - 01 - Filter posedge detect enabled + * - 10 - Filter negedge detect enabled + * - 11 - Filter any edge detect enabled + */ +/*@{*/ +#define BP_LLWU_FILT2_FILTE (5U) /*!< Bit position for LLWU_FILT2_FILTE. */ +#define BM_LLWU_FILT2_FILTE (0x60U) /*!< Bit mask for LLWU_FILT2_FILTE. */ +#define BS_LLWU_FILT2_FILTE (2U) /*!< Bit field size in bits for LLWU_FILT2_FILTE. */ + +/*! @brief Read current value of the LLWU_FILT2_FILTE field. */ +#define BR_LLWU_FILT2_FILTE(x) (HW_LLWU_FILT2(x).B.FILTE) + +/*! @brief Format value for bitfield LLWU_FILT2_FILTE. */ +#define BF_LLWU_FILT2_FILTE(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT2_FILTE) & BM_LLWU_FILT2_FILTE) + +/*! @brief Set the FILTE field to a new value. */ +#define BW_LLWU_FILT2_FILTE(x, v) (HW_LLWU_FILT2_WR(x, (HW_LLWU_FILT2_RD(x) & ~BM_LLWU_FILT2_FILTE) | BF_LLWU_FILT2_FILTE(v))) +/*@}*/ + +/*! + * @name Register LLWU_FILT2, field FILTF[7] (W1C) + * + * Indicates that the filtered external wakeup pin, selected by FILTSEL, was a + * source of exiting a low-leakage power mode. To clear the flag write a one to + * FILTF. + * + * Values: + * - 0 - Pin Filter 2 was not a wakeup source + * - 1 - Pin Filter 2 was a wakeup source + */ +/*@{*/ +#define BP_LLWU_FILT2_FILTF (7U) /*!< Bit position for LLWU_FILT2_FILTF. */ +#define BM_LLWU_FILT2_FILTF (0x80U) /*!< Bit mask for LLWU_FILT2_FILTF. */ +#define BS_LLWU_FILT2_FILTF (1U) /*!< Bit field size in bits for LLWU_FILT2_FILTF. */ + +/*! @brief Read current value of the LLWU_FILT2_FILTF field. */ +#define BR_LLWU_FILT2_FILTF(x) (BITBAND_ACCESS8(HW_LLWU_FILT2_ADDR(x), BP_LLWU_FILT2_FILTF)) + +/*! @brief Format value for bitfield LLWU_FILT2_FILTF. */ +#define BF_LLWU_FILT2_FILTF(v) ((uint8_t)((uint8_t)(v) << BP_LLWU_FILT2_FILTF) & BM_LLWU_FILT2_FILTF) + +/*! @brief Set the FILTF field to a new value. */ +#define BW_LLWU_FILT2_FILTF(x, v) (BITBAND_ACCESS8(HW_LLWU_FILT2_ADDR(x), BP_LLWU_FILT2_FILTF) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_llwu_t - module struct + ******************************************************************************/ +/*! + * @brief All LLWU module registers. + */ +#pragma pack(1) +typedef struct _hw_llwu +{ + __IO hw_llwu_pe1_t PE1; /*!< [0x0] LLWU Pin Enable 1 register */ + __IO hw_llwu_pe2_t PE2; /*!< [0x1] LLWU Pin Enable 2 register */ + __IO hw_llwu_pe3_t PE3; /*!< [0x2] LLWU Pin Enable 3 register */ + __IO hw_llwu_pe4_t PE4; /*!< [0x3] LLWU Pin Enable 4 register */ + __IO hw_llwu_me_t ME; /*!< [0x4] LLWU Module Enable register */ + __IO hw_llwu_f1_t F1; /*!< [0x5] LLWU Flag 1 register */ + __IO hw_llwu_f2_t F2; /*!< [0x6] LLWU Flag 2 register */ + __I hw_llwu_f3_t F3; /*!< [0x7] LLWU Flag 3 register */ + __IO hw_llwu_filt1_t FILT1; /*!< [0x8] LLWU Pin Filter 1 register */ + __IO hw_llwu_filt2_t FILT2; /*!< [0x9] LLWU Pin Filter 2 register */ +} hw_llwu_t; +#pragma pack() + +/*! @brief Macro to access all LLWU registers. */ +/*! @param x LLWU module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_LLWU(LLWU_BASE)</code>. */ +#define HW_LLWU(x) (*(hw_llwu_t *)(x)) + +#endif /* __HW_LLWU_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lptmr.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lptmr.h new file mode 100644 index 0000000000..4a12976cba --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lptmr.h @@ -0,0 +1,614 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_LPTMR_REGISTERS_H__ +#define __HW_LPTMR_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 LPTMR + * + * Low Power Timer + * + * Registers defined in this header file: + * - HW_LPTMR_CSR - Low Power Timer Control Status Register + * - HW_LPTMR_PSR - Low Power Timer Prescale Register + * - HW_LPTMR_CMR - Low Power Timer Compare Register + * - HW_LPTMR_CNR - Low Power Timer Counter Register + * + * - hw_lptmr_t - Struct containing all module registers. + */ + +#define HW_LPTMR_INSTANCE_COUNT (1U) /*!< Number of instances of the LPTMR module. */ + +/******************************************************************************* + * HW_LPTMR_CSR - Low Power Timer Control Status Register + ******************************************************************************/ + +/*! + * @brief HW_LPTMR_CSR - Low Power Timer Control Status Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_lptmr_csr +{ + uint32_t U; + struct _hw_lptmr_csr_bitfields + { + uint32_t TEN : 1; /*!< [0] Timer Enable */ + uint32_t TMS : 1; /*!< [1] Timer Mode Select */ + uint32_t TFC : 1; /*!< [2] Timer Free-Running Counter */ + uint32_t TPP : 1; /*!< [3] Timer Pin Polarity */ + uint32_t TPS : 2; /*!< [5:4] Timer Pin Select */ + uint32_t TIE : 1; /*!< [6] Timer Interrupt Enable */ + uint32_t TCF : 1; /*!< [7] Timer Compare Flag */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_lptmr_csr_t; + +/*! + * @name Constants and macros for entire LPTMR_CSR register + */ +/*@{*/ +#define HW_LPTMR_CSR_ADDR(x) ((x) + 0x0U) + +#define HW_LPTMR_CSR(x) (*(__IO hw_lptmr_csr_t *) HW_LPTMR_CSR_ADDR(x)) +#define HW_LPTMR_CSR_RD(x) (HW_LPTMR_CSR(x).U) +#define HW_LPTMR_CSR_WR(x, v) (HW_LPTMR_CSR(x).U = (v)) +#define HW_LPTMR_CSR_SET(x, v) (HW_LPTMR_CSR_WR(x, HW_LPTMR_CSR_RD(x) | (v))) +#define HW_LPTMR_CSR_CLR(x, v) (HW_LPTMR_CSR_WR(x, HW_LPTMR_CSR_RD(x) & ~(v))) +#define HW_LPTMR_CSR_TOG(x, v) (HW_LPTMR_CSR_WR(x, HW_LPTMR_CSR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPTMR_CSR bitfields + */ + +/*! + * @name Register LPTMR_CSR, field TEN[0] (RW) + * + * When TEN is clear, it resets the LPTMR internal logic, including the CNR and + * TCF. When TEN is set, the LPTMR is enabled. While writing 1 to this field, + * CSR[5:1] must not be altered. + * + * Values: + * - 0 - LPTMR is disabled and internal logic is reset. + * - 1 - LPTMR is enabled. + */ +/*@{*/ +#define BP_LPTMR_CSR_TEN (0U) /*!< Bit position for LPTMR_CSR_TEN. */ +#define BM_LPTMR_CSR_TEN (0x00000001U) /*!< Bit mask for LPTMR_CSR_TEN. */ +#define BS_LPTMR_CSR_TEN (1U) /*!< Bit field size in bits for LPTMR_CSR_TEN. */ + +/*! @brief Read current value of the LPTMR_CSR_TEN field. */ +#define BR_LPTMR_CSR_TEN(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TEN)) + +/*! @brief Format value for bitfield LPTMR_CSR_TEN. */ +#define BF_LPTMR_CSR_TEN(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TEN) & BM_LPTMR_CSR_TEN) + +/*! @brief Set the TEN field to a new value. */ +#define BW_LPTMR_CSR_TEN(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TEN) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TMS[1] (RW) + * + * Configures the mode of the LPTMR. TMS must be altered only when the LPTMR is + * disabled. + * + * Values: + * - 0 - Time Counter mode. + * - 1 - Pulse Counter mode. + */ +/*@{*/ +#define BP_LPTMR_CSR_TMS (1U) /*!< Bit position for LPTMR_CSR_TMS. */ +#define BM_LPTMR_CSR_TMS (0x00000002U) /*!< Bit mask for LPTMR_CSR_TMS. */ +#define BS_LPTMR_CSR_TMS (1U) /*!< Bit field size in bits for LPTMR_CSR_TMS. */ + +/*! @brief Read current value of the LPTMR_CSR_TMS field. */ +#define BR_LPTMR_CSR_TMS(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TMS)) + +/*! @brief Format value for bitfield LPTMR_CSR_TMS. */ +#define BF_LPTMR_CSR_TMS(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TMS) & BM_LPTMR_CSR_TMS) + +/*! @brief Set the TMS field to a new value. */ +#define BW_LPTMR_CSR_TMS(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TMS) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TFC[2] (RW) + * + * When clear, TFC configures the CNR to reset whenever TCF is set. When set, + * TFC configures the CNR to reset on overflow. TFC must be altered only when the + * LPTMR is disabled. + * + * Values: + * - 0 - CNR is reset whenever TCF is set. + * - 1 - CNR is reset on overflow. + */ +/*@{*/ +#define BP_LPTMR_CSR_TFC (2U) /*!< Bit position for LPTMR_CSR_TFC. */ +#define BM_LPTMR_CSR_TFC (0x00000004U) /*!< Bit mask for LPTMR_CSR_TFC. */ +#define BS_LPTMR_CSR_TFC (1U) /*!< Bit field size in bits for LPTMR_CSR_TFC. */ + +/*! @brief Read current value of the LPTMR_CSR_TFC field. */ +#define BR_LPTMR_CSR_TFC(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TFC)) + +/*! @brief Format value for bitfield LPTMR_CSR_TFC. */ +#define BF_LPTMR_CSR_TFC(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TFC) & BM_LPTMR_CSR_TFC) + +/*! @brief Set the TFC field to a new value. */ +#define BW_LPTMR_CSR_TFC(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TFC) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TPP[3] (RW) + * + * Configures the polarity of the input source in Pulse Counter mode. TPP must + * be changed only when the LPTMR is disabled. + * + * Values: + * - 0 - Pulse Counter input source is active-high, and the CNR will increment + * on the rising-edge. + * - 1 - Pulse Counter input source is active-low, and the CNR will increment on + * the falling-edge. + */ +/*@{*/ +#define BP_LPTMR_CSR_TPP (3U) /*!< Bit position for LPTMR_CSR_TPP. */ +#define BM_LPTMR_CSR_TPP (0x00000008U) /*!< Bit mask for LPTMR_CSR_TPP. */ +#define BS_LPTMR_CSR_TPP (1U) /*!< Bit field size in bits for LPTMR_CSR_TPP. */ + +/*! @brief Read current value of the LPTMR_CSR_TPP field. */ +#define BR_LPTMR_CSR_TPP(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TPP)) + +/*! @brief Format value for bitfield LPTMR_CSR_TPP. */ +#define BF_LPTMR_CSR_TPP(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TPP) & BM_LPTMR_CSR_TPP) + +/*! @brief Set the TPP field to a new value. */ +#define BW_LPTMR_CSR_TPP(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TPP) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TPS[5:4] (RW) + * + * Configures the input source to be used in Pulse Counter mode. TPS must be + * altered only when the LPTMR is disabled. The input connections vary by device. + * See the chip configuration details for information on the connections to these + * inputs. + * + * Values: + * - 00 - Pulse counter input 0 is selected. + * - 01 - Pulse counter input 1 is selected. + * - 10 - Pulse counter input 2 is selected. + * - 11 - Pulse counter input 3 is selected. + */ +/*@{*/ +#define BP_LPTMR_CSR_TPS (4U) /*!< Bit position for LPTMR_CSR_TPS. */ +#define BM_LPTMR_CSR_TPS (0x00000030U) /*!< Bit mask for LPTMR_CSR_TPS. */ +#define BS_LPTMR_CSR_TPS (2U) /*!< Bit field size in bits for LPTMR_CSR_TPS. */ + +/*! @brief Read current value of the LPTMR_CSR_TPS field. */ +#define BR_LPTMR_CSR_TPS(x) (HW_LPTMR_CSR(x).B.TPS) + +/*! @brief Format value for bitfield LPTMR_CSR_TPS. */ +#define BF_LPTMR_CSR_TPS(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TPS) & BM_LPTMR_CSR_TPS) + +/*! @brief Set the TPS field to a new value. */ +#define BW_LPTMR_CSR_TPS(x, v) (HW_LPTMR_CSR_WR(x, (HW_LPTMR_CSR_RD(x) & ~BM_LPTMR_CSR_TPS) | BF_LPTMR_CSR_TPS(v))) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TIE[6] (RW) + * + * When TIE is set, the LPTMR Interrupt is generated whenever TCF is also set. + * + * Values: + * - 0 - Timer interrupt disabled. + * - 1 - Timer interrupt enabled. + */ +/*@{*/ +#define BP_LPTMR_CSR_TIE (6U) /*!< Bit position for LPTMR_CSR_TIE. */ +#define BM_LPTMR_CSR_TIE (0x00000040U) /*!< Bit mask for LPTMR_CSR_TIE. */ +#define BS_LPTMR_CSR_TIE (1U) /*!< Bit field size in bits for LPTMR_CSR_TIE. */ + +/*! @brief Read current value of the LPTMR_CSR_TIE field. */ +#define BR_LPTMR_CSR_TIE(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TIE)) + +/*! @brief Format value for bitfield LPTMR_CSR_TIE. */ +#define BF_LPTMR_CSR_TIE(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TIE) & BM_LPTMR_CSR_TIE) + +/*! @brief Set the TIE field to a new value. */ +#define BW_LPTMR_CSR_TIE(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TIE) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_CSR, field TCF[7] (W1C) + * + * TCF is set when the LPTMR is enabled and the CNR equals the CMR and + * increments. TCF is cleared when the LPTMR is disabled or a logic 1 is written to it. + * + * Values: + * - 0 - The value of CNR is not equal to CMR and increments. + * - 1 - The value of CNR is equal to CMR and increments. + */ +/*@{*/ +#define BP_LPTMR_CSR_TCF (7U) /*!< Bit position for LPTMR_CSR_TCF. */ +#define BM_LPTMR_CSR_TCF (0x00000080U) /*!< Bit mask for LPTMR_CSR_TCF. */ +#define BS_LPTMR_CSR_TCF (1U) /*!< Bit field size in bits for LPTMR_CSR_TCF. */ + +/*! @brief Read current value of the LPTMR_CSR_TCF field. */ +#define BR_LPTMR_CSR_TCF(x) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TCF)) + +/*! @brief Format value for bitfield LPTMR_CSR_TCF. */ +#define BF_LPTMR_CSR_TCF(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CSR_TCF) & BM_LPTMR_CSR_TCF) + +/*! @brief Set the TCF field to a new value. */ +#define BW_LPTMR_CSR_TCF(x, v) (BITBAND_ACCESS32(HW_LPTMR_CSR_ADDR(x), BP_LPTMR_CSR_TCF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LPTMR_PSR - Low Power Timer Prescale Register + ******************************************************************************/ + +/*! + * @brief HW_LPTMR_PSR - Low Power Timer Prescale Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_lptmr_psr +{ + uint32_t U; + struct _hw_lptmr_psr_bitfields + { + uint32_t PCS : 2; /*!< [1:0] Prescaler Clock Select */ + uint32_t PBYP : 1; /*!< [2] Prescaler Bypass */ + uint32_t PRESCALE : 4; /*!< [6:3] Prescale Value */ + uint32_t RESERVED0 : 25; /*!< [31:7] */ + } B; +} hw_lptmr_psr_t; + +/*! + * @name Constants and macros for entire LPTMR_PSR register + */ +/*@{*/ +#define HW_LPTMR_PSR_ADDR(x) ((x) + 0x4U) + +#define HW_LPTMR_PSR(x) (*(__IO hw_lptmr_psr_t *) HW_LPTMR_PSR_ADDR(x)) +#define HW_LPTMR_PSR_RD(x) (HW_LPTMR_PSR(x).U) +#define HW_LPTMR_PSR_WR(x, v) (HW_LPTMR_PSR(x).U = (v)) +#define HW_LPTMR_PSR_SET(x, v) (HW_LPTMR_PSR_WR(x, HW_LPTMR_PSR_RD(x) | (v))) +#define HW_LPTMR_PSR_CLR(x, v) (HW_LPTMR_PSR_WR(x, HW_LPTMR_PSR_RD(x) & ~(v))) +#define HW_LPTMR_PSR_TOG(x, v) (HW_LPTMR_PSR_WR(x, HW_LPTMR_PSR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPTMR_PSR bitfields + */ + +/*! + * @name Register LPTMR_PSR, field PCS[1:0] (RW) + * + * Selects the clock to be used by the LPTMR prescaler/glitch filter. PCS must + * be altered only when the LPTMR is disabled. The clock connections vary by + * device. See the chip configuration details for information on the connections to + * these inputs. + * + * Values: + * - 00 - Prescaler/glitch filter clock 0 selected. + * - 01 - Prescaler/glitch filter clock 1 selected. + * - 10 - Prescaler/glitch filter clock 2 selected. + * - 11 - Prescaler/glitch filter clock 3 selected. + */ +/*@{*/ +#define BP_LPTMR_PSR_PCS (0U) /*!< Bit position for LPTMR_PSR_PCS. */ +#define BM_LPTMR_PSR_PCS (0x00000003U) /*!< Bit mask for LPTMR_PSR_PCS. */ +#define BS_LPTMR_PSR_PCS (2U) /*!< Bit field size in bits for LPTMR_PSR_PCS. */ + +/*! @brief Read current value of the LPTMR_PSR_PCS field. */ +#define BR_LPTMR_PSR_PCS(x) (HW_LPTMR_PSR(x).B.PCS) + +/*! @brief Format value for bitfield LPTMR_PSR_PCS. */ +#define BF_LPTMR_PSR_PCS(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_PSR_PCS) & BM_LPTMR_PSR_PCS) + +/*! @brief Set the PCS field to a new value. */ +#define BW_LPTMR_PSR_PCS(x, v) (HW_LPTMR_PSR_WR(x, (HW_LPTMR_PSR_RD(x) & ~BM_LPTMR_PSR_PCS) | BF_LPTMR_PSR_PCS(v))) +/*@}*/ + +/*! + * @name Register LPTMR_PSR, field PBYP[2] (RW) + * + * When PBYP is set, the selected prescaler clock in Time Counter mode or + * selected input source in Pulse Counter mode directly clocks the CNR. When PBYP is + * clear, the CNR is clocked by the output of the prescaler/glitch filter. PBYP + * must be altered only when the LPTMR is disabled. + * + * Values: + * - 0 - Prescaler/glitch filter is enabled. + * - 1 - Prescaler/glitch filter is bypassed. + */ +/*@{*/ +#define BP_LPTMR_PSR_PBYP (2U) /*!< Bit position for LPTMR_PSR_PBYP. */ +#define BM_LPTMR_PSR_PBYP (0x00000004U) /*!< Bit mask for LPTMR_PSR_PBYP. */ +#define BS_LPTMR_PSR_PBYP (1U) /*!< Bit field size in bits for LPTMR_PSR_PBYP. */ + +/*! @brief Read current value of the LPTMR_PSR_PBYP field. */ +#define BR_LPTMR_PSR_PBYP(x) (BITBAND_ACCESS32(HW_LPTMR_PSR_ADDR(x), BP_LPTMR_PSR_PBYP)) + +/*! @brief Format value for bitfield LPTMR_PSR_PBYP. */ +#define BF_LPTMR_PSR_PBYP(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_PSR_PBYP) & BM_LPTMR_PSR_PBYP) + +/*! @brief Set the PBYP field to a new value. */ +#define BW_LPTMR_PSR_PBYP(x, v) (BITBAND_ACCESS32(HW_LPTMR_PSR_ADDR(x), BP_LPTMR_PSR_PBYP) = (v)) +/*@}*/ + +/*! + * @name Register LPTMR_PSR, field PRESCALE[6:3] (RW) + * + * Configures the size of the Prescaler in Time Counter mode or width of the + * glitch filter in Pulse Counter mode. PRESCALE must be altered only when the LPTMR + * is disabled. + * + * Values: + * - 0000 - Prescaler divides the prescaler clock by 2; glitch filter does not + * support this configuration. + * - 0001 - Prescaler divides the prescaler clock by 4; glitch filter recognizes + * change on input pin after 2 rising clock edges. + * - 0010 - Prescaler divides the prescaler clock by 8; glitch filter recognizes + * change on input pin after 4 rising clock edges. + * - 0011 - Prescaler divides the prescaler clock by 16; glitch filter + * recognizes change on input pin after 8 rising clock edges. + * - 0100 - Prescaler divides the prescaler clock by 32; glitch filter + * recognizes change on input pin after 16 rising clock edges. + * - 0101 - Prescaler divides the prescaler clock by 64; glitch filter + * recognizes change on input pin after 32 rising clock edges. + * - 0110 - Prescaler divides the prescaler clock by 128; glitch filter + * recognizes change on input pin after 64 rising clock edges. + * - 0111 - Prescaler divides the prescaler clock by 256; glitch filter + * recognizes change on input pin after 128 rising clock edges. + * - 1000 - Prescaler divides the prescaler clock by 512; glitch filter + * recognizes change on input pin after 256 rising clock edges. + * - 1001 - Prescaler divides the prescaler clock by 1024; glitch filter + * recognizes change on input pin after 512 rising clock edges. + * - 1010 - Prescaler divides the prescaler clock by 2048; glitch filter + * recognizes change on input pin after 1024 rising clock edges. + * - 1011 - Prescaler divides the prescaler clock by 4096; glitch filter + * recognizes change on input pin after 2048 rising clock edges. + * - 1100 - Prescaler divides the prescaler clock by 8192; glitch filter + * recognizes change on input pin after 4096 rising clock edges. + * - 1101 - Prescaler divides the prescaler clock by 16,384; glitch filter + * recognizes change on input pin after 8192 rising clock edges. + * - 1110 - Prescaler divides the prescaler clock by 32,768; glitch filter + * recognizes change on input pin after 16,384 rising clock edges. + * - 1111 - Prescaler divides the prescaler clock by 65,536; glitch filter + * recognizes change on input pin after 32,768 rising clock edges. + */ +/*@{*/ +#define BP_LPTMR_PSR_PRESCALE (3U) /*!< Bit position for LPTMR_PSR_PRESCALE. */ +#define BM_LPTMR_PSR_PRESCALE (0x00000078U) /*!< Bit mask for LPTMR_PSR_PRESCALE. */ +#define BS_LPTMR_PSR_PRESCALE (4U) /*!< Bit field size in bits for LPTMR_PSR_PRESCALE. */ + +/*! @brief Read current value of the LPTMR_PSR_PRESCALE field. */ +#define BR_LPTMR_PSR_PRESCALE(x) (HW_LPTMR_PSR(x).B.PRESCALE) + +/*! @brief Format value for bitfield LPTMR_PSR_PRESCALE. */ +#define BF_LPTMR_PSR_PRESCALE(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_PSR_PRESCALE) & BM_LPTMR_PSR_PRESCALE) + +/*! @brief Set the PRESCALE field to a new value. */ +#define BW_LPTMR_PSR_PRESCALE(x, v) (HW_LPTMR_PSR_WR(x, (HW_LPTMR_PSR_RD(x) & ~BM_LPTMR_PSR_PRESCALE) | BF_LPTMR_PSR_PRESCALE(v))) +/*@}*/ + +/******************************************************************************* + * HW_LPTMR_CMR - Low Power Timer Compare Register + ******************************************************************************/ + +/*! + * @brief HW_LPTMR_CMR - Low Power Timer Compare Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_lptmr_cmr +{ + uint32_t U; + struct _hw_lptmr_cmr_bitfields + { + uint32_t COMPARE : 16; /*!< [15:0] Compare Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_lptmr_cmr_t; + +/*! + * @name Constants and macros for entire LPTMR_CMR register + */ +/*@{*/ +#define HW_LPTMR_CMR_ADDR(x) ((x) + 0x8U) + +#define HW_LPTMR_CMR(x) (*(__IO hw_lptmr_cmr_t *) HW_LPTMR_CMR_ADDR(x)) +#define HW_LPTMR_CMR_RD(x) (HW_LPTMR_CMR(x).U) +#define HW_LPTMR_CMR_WR(x, v) (HW_LPTMR_CMR(x).U = (v)) +#define HW_LPTMR_CMR_SET(x, v) (HW_LPTMR_CMR_WR(x, HW_LPTMR_CMR_RD(x) | (v))) +#define HW_LPTMR_CMR_CLR(x, v) (HW_LPTMR_CMR_WR(x, HW_LPTMR_CMR_RD(x) & ~(v))) +#define HW_LPTMR_CMR_TOG(x, v) (HW_LPTMR_CMR_WR(x, HW_LPTMR_CMR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPTMR_CMR bitfields + */ + +/*! + * @name Register LPTMR_CMR, field COMPARE[15:0] (RW) + * + * When the LPTMR is enabled and the CNR equals the value in the CMR and + * increments, TCF is set and the hardware trigger asserts until the next time the CNR + * increments. If the CMR is 0, the hardware trigger will remain asserted until + * the LPTMR is disabled. If the LPTMR is enabled, the CMR must be altered only + * when TCF is set. + */ +/*@{*/ +#define BP_LPTMR_CMR_COMPARE (0U) /*!< Bit position for LPTMR_CMR_COMPARE. */ +#define BM_LPTMR_CMR_COMPARE (0x0000FFFFU) /*!< Bit mask for LPTMR_CMR_COMPARE. */ +#define BS_LPTMR_CMR_COMPARE (16U) /*!< Bit field size in bits for LPTMR_CMR_COMPARE. */ + +/*! @brief Read current value of the LPTMR_CMR_COMPARE field. */ +#define BR_LPTMR_CMR_COMPARE(x) (HW_LPTMR_CMR(x).B.COMPARE) + +/*! @brief Format value for bitfield LPTMR_CMR_COMPARE. */ +#define BF_LPTMR_CMR_COMPARE(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CMR_COMPARE) & BM_LPTMR_CMR_COMPARE) + +/*! @brief Set the COMPARE field to a new value. */ +#define BW_LPTMR_CMR_COMPARE(x, v) (HW_LPTMR_CMR_WR(x, (HW_LPTMR_CMR_RD(x) & ~BM_LPTMR_CMR_COMPARE) | BF_LPTMR_CMR_COMPARE(v))) +/*@}*/ + +/******************************************************************************* + * HW_LPTMR_CNR - Low Power Timer Counter Register + ******************************************************************************/ + +/*! + * @brief HW_LPTMR_CNR - Low Power Timer Counter Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_lptmr_cnr +{ + uint32_t U; + struct _hw_lptmr_cnr_bitfields + { + uint32_t COUNTER : 16; /*!< [15:0] Counter Value */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_lptmr_cnr_t; + +/*! + * @name Constants and macros for entire LPTMR_CNR register + */ +/*@{*/ +#define HW_LPTMR_CNR_ADDR(x) ((x) + 0xCU) + +#define HW_LPTMR_CNR(x) (*(__IO hw_lptmr_cnr_t *) HW_LPTMR_CNR_ADDR(x)) +#define HW_LPTMR_CNR_RD(x) (HW_LPTMR_CNR(x).U) +#define HW_LPTMR_CNR_WR(x, v) (HW_LPTMR_CNR(x).U = (v)) +#define HW_LPTMR_CNR_SET(x, v) (HW_LPTMR_CNR_WR(x, HW_LPTMR_CNR_RD(x) | (v))) +#define HW_LPTMR_CNR_CLR(x, v) (HW_LPTMR_CNR_WR(x, HW_LPTMR_CNR_RD(x) & ~(v))) +#define HW_LPTMR_CNR_TOG(x, v) (HW_LPTMR_CNR_WR(x, HW_LPTMR_CNR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPTMR_CNR bitfields + */ + +/*! + * @name Register LPTMR_CNR, field COUNTER[15:0] (RW) + */ +/*@{*/ +#define BP_LPTMR_CNR_COUNTER (0U) /*!< Bit position for LPTMR_CNR_COUNTER. */ +#define BM_LPTMR_CNR_COUNTER (0x0000FFFFU) /*!< Bit mask for LPTMR_CNR_COUNTER. */ +#define BS_LPTMR_CNR_COUNTER (16U) /*!< Bit field size in bits for LPTMR_CNR_COUNTER. */ + +/*! @brief Read current value of the LPTMR_CNR_COUNTER field. */ +#define BR_LPTMR_CNR_COUNTER(x) (HW_LPTMR_CNR(x).B.COUNTER) + +/*! @brief Format value for bitfield LPTMR_CNR_COUNTER. */ +#define BF_LPTMR_CNR_COUNTER(v) ((uint32_t)((uint32_t)(v) << BP_LPTMR_CNR_COUNTER) & BM_LPTMR_CNR_COUNTER) + +/*! @brief Set the COUNTER field to a new value. */ +#define BW_LPTMR_CNR_COUNTER(x, v) (HW_LPTMR_CNR_WR(x, (HW_LPTMR_CNR_RD(x) & ~BM_LPTMR_CNR_COUNTER) | BF_LPTMR_CNR_COUNTER(v))) +/*@}*/ + +/******************************************************************************* + * hw_lptmr_t - module struct + ******************************************************************************/ +/*! + * @brief All LPTMR module registers. + */ +#pragma pack(1) +typedef struct _hw_lptmr +{ + __IO hw_lptmr_csr_t CSR; /*!< [0x0] Low Power Timer Control Status Register */ + __IO hw_lptmr_psr_t PSR; /*!< [0x4] Low Power Timer Prescale Register */ + __IO hw_lptmr_cmr_t CMR; /*!< [0x8] Low Power Timer Compare Register */ + __IO hw_lptmr_cnr_t CNR; /*!< [0xC] Low Power Timer Counter Register */ +} hw_lptmr_t; +#pragma pack() + +/*! @brief Macro to access all LPTMR registers. */ +/*! @param x LPTMR module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_LPTMR(LPTMR0_BASE)</code>. */ +#define HW_LPTMR(x) (*(hw_lptmr_t *)(x)) + +#endif /* __HW_LPTMR_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lpuart.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lpuart.h new file mode 100644 index 0000000000..68ec95a4f6 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_lpuart.h @@ -0,0 +1,2519 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_LPUART_REGISTERS_H__ +#define __HW_LPUART_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 LPUART + * + * Universal Asynchronous Receiver/Transmitter + * + * Registers defined in this header file: + * - HW_LPUART_BAUD - LPUART Baud Rate Register + * - HW_LPUART_STAT - LPUART Status Register + * - HW_LPUART_CTRL - LPUART Control Register + * - HW_LPUART_DATA - LPUART Data Register + * - HW_LPUART_MATCH - LPUART Match Address Register + * - HW_LPUART_MODIR - LPUART Modem IrDA Register + * + * - hw_lpuart_t - Struct containing all module registers. + */ + +#define HW_LPUART_INSTANCE_COUNT (1U) /*!< Number of instances of the LPUART module. */ + +/******************************************************************************* + * HW_LPUART_BAUD - LPUART Baud Rate Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_BAUD - LPUART Baud Rate Register (RW) + * + * Reset value: 0x0F000004U + */ +typedef union _hw_lpuart_baud +{ + uint32_t U; + struct _hw_lpuart_baud_bitfields + { + uint32_t SBR : 13; /*!< [12:0] Baud Rate Modulo Divisor. */ + uint32_t SBNS : 1; /*!< [13] Stop Bit Number Select */ + uint32_t RXEDGIE : 1; /*!< [14] RX Input Active Edge Interrupt Enable + * */ + uint32_t LBKDIE : 1; /*!< [15] LIN Break Detect Interrupt Enable */ + uint32_t RESYNCDIS : 1; /*!< [16] Resynchronization Disable */ + uint32_t BOTHEDGE : 1; /*!< [17] Both Edge Sampling */ + uint32_t MATCFG : 2; /*!< [19:18] Match Configuration */ + uint32_t RESERVED0 : 1; /*!< [20] */ + uint32_t RDMAE : 1; /*!< [21] Receiver Full DMA Enable */ + uint32_t RESERVED1 : 1; /*!< [22] */ + uint32_t TDMAE : 1; /*!< [23] Transmitter DMA Enable */ + uint32_t OSR : 5; /*!< [28:24] Over Sampling Ratio */ + uint32_t M10 : 1; /*!< [29] 10-bit Mode select */ + uint32_t MAEN2 : 1; /*!< [30] Match Address Mode Enable 2 */ + uint32_t MAEN1 : 1; /*!< [31] Match Address Mode Enable 1 */ + } B; +} hw_lpuart_baud_t; + +/*! + * @name Constants and macros for entire LPUART_BAUD register + */ +/*@{*/ +#define HW_LPUART_BAUD_ADDR(x) ((x) + 0x0U) + +#define HW_LPUART_BAUD(x) (*(__IO hw_lpuart_baud_t *) HW_LPUART_BAUD_ADDR(x)) +#define HW_LPUART_BAUD_RD(x) (HW_LPUART_BAUD(x).U) +#define HW_LPUART_BAUD_WR(x, v) (HW_LPUART_BAUD(x).U = (v)) +#define HW_LPUART_BAUD_SET(x, v) (HW_LPUART_BAUD_WR(x, HW_LPUART_BAUD_RD(x) | (v))) +#define HW_LPUART_BAUD_CLR(x, v) (HW_LPUART_BAUD_WR(x, HW_LPUART_BAUD_RD(x) & ~(v))) +#define HW_LPUART_BAUD_TOG(x, v) (HW_LPUART_BAUD_WR(x, HW_LPUART_BAUD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_BAUD bitfields + */ + +/*! + * @name Register LPUART_BAUD, field SBR[12:0] (RW) + * + * The 13 bits in SBR[12:0] set the modulo divide rate for the baud rate + * generator. When SBR is 1 - 8191, the baud rate equals "baud clock / ((OSR+1) * SBR)". + * The 13-bit baud rate setting [SBR12:SBR0] must only be updated when the + * transmitter and receiver are both disabled (LPUART_CTRL[RE] and LPUART_CTRL[TE] are + * both 0). + */ +/*@{*/ +#define BP_LPUART_BAUD_SBR (0U) /*!< Bit position for LPUART_BAUD_SBR. */ +#define BM_LPUART_BAUD_SBR (0x00001FFFU) /*!< Bit mask for LPUART_BAUD_SBR. */ +#define BS_LPUART_BAUD_SBR (13U) /*!< Bit field size in bits for LPUART_BAUD_SBR. */ + +/*! @brief Read current value of the LPUART_BAUD_SBR field. */ +#define BR_LPUART_BAUD_SBR(x) (HW_LPUART_BAUD(x).B.SBR) + +/*! @brief Format value for bitfield LPUART_BAUD_SBR. */ +#define BF_LPUART_BAUD_SBR(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_SBR) & BM_LPUART_BAUD_SBR) + +/*! @brief Set the SBR field to a new value. */ +#define BW_LPUART_BAUD_SBR(x, v) (HW_LPUART_BAUD_WR(x, (HW_LPUART_BAUD_RD(x) & ~BM_LPUART_BAUD_SBR) | BF_LPUART_BAUD_SBR(v))) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field SBNS[13] (RW) + * + * SBNS determines whether data characters are one or two stop bits. This bit + * should only be changed when the transmitter and receiver are both disabled. + * + * Values: + * - 0 - One stop bit. + * - 1 - Two stop bits. + */ +/*@{*/ +#define BP_LPUART_BAUD_SBNS (13U) /*!< Bit position for LPUART_BAUD_SBNS. */ +#define BM_LPUART_BAUD_SBNS (0x00002000U) /*!< Bit mask for LPUART_BAUD_SBNS. */ +#define BS_LPUART_BAUD_SBNS (1U) /*!< Bit field size in bits for LPUART_BAUD_SBNS. */ + +/*! @brief Read current value of the LPUART_BAUD_SBNS field. */ +#define BR_LPUART_BAUD_SBNS(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_SBNS)) + +/*! @brief Format value for bitfield LPUART_BAUD_SBNS. */ +#define BF_LPUART_BAUD_SBNS(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_SBNS) & BM_LPUART_BAUD_SBNS) + +/*! @brief Set the SBNS field to a new value. */ +#define BW_LPUART_BAUD_SBNS(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_SBNS) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field RXEDGIE[14] (RW) + * + * Enables the receive input active edge, RXEDGIF, to generate interrupt + * requests. Changing CTRL[LOOP] or CTRL[RSRC] when RXEDGIE is set can cause the RXEDGIF + * to set. + * + * Values: + * - 0 - Hardware interrupts from LPUART_STAT[RXEDGIF] disabled (use polling). + * - 1 - Hardware interrupt requested when LPUART_STAT[RXEDGIF] flag is 1. + */ +/*@{*/ +#define BP_LPUART_BAUD_RXEDGIE (14U) /*!< Bit position for LPUART_BAUD_RXEDGIE. */ +#define BM_LPUART_BAUD_RXEDGIE (0x00004000U) /*!< Bit mask for LPUART_BAUD_RXEDGIE. */ +#define BS_LPUART_BAUD_RXEDGIE (1U) /*!< Bit field size in bits for LPUART_BAUD_RXEDGIE. */ + +/*! @brief Read current value of the LPUART_BAUD_RXEDGIE field. */ +#define BR_LPUART_BAUD_RXEDGIE(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RXEDGIE)) + +/*! @brief Format value for bitfield LPUART_BAUD_RXEDGIE. */ +#define BF_LPUART_BAUD_RXEDGIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_RXEDGIE) & BM_LPUART_BAUD_RXEDGIE) + +/*! @brief Set the RXEDGIE field to a new value. */ +#define BW_LPUART_BAUD_RXEDGIE(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RXEDGIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field LBKDIE[15] (RW) + * + * LBKDIE enables the LIN break detect flag, LBKDIF, to generate interrupt + * requests. + * + * Values: + * - 0 - Hardware interrupts from LPUART_STAT[LBKDIF] disabled (use polling). + * - 1 - Hardware interrupt requested when LPUART_STAT[LBKDIF] flag is 1. + */ +/*@{*/ +#define BP_LPUART_BAUD_LBKDIE (15U) /*!< Bit position for LPUART_BAUD_LBKDIE. */ +#define BM_LPUART_BAUD_LBKDIE (0x00008000U) /*!< Bit mask for LPUART_BAUD_LBKDIE. */ +#define BS_LPUART_BAUD_LBKDIE (1U) /*!< Bit field size in bits for LPUART_BAUD_LBKDIE. */ + +/*! @brief Read current value of the LPUART_BAUD_LBKDIE field. */ +#define BR_LPUART_BAUD_LBKDIE(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_LBKDIE)) + +/*! @brief Format value for bitfield LPUART_BAUD_LBKDIE. */ +#define BF_LPUART_BAUD_LBKDIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_LBKDIE) & BM_LPUART_BAUD_LBKDIE) + +/*! @brief Set the LBKDIE field to a new value. */ +#define BW_LPUART_BAUD_LBKDIE(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_LBKDIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field RESYNCDIS[16] (RW) + * + * When set, disables the resynchronization of the received data word when a + * data one followed by data zero transition is detected. This bit should only be + * changed when the receiver is disabled. + * + * Values: + * - 0 - Resynchronization during received data word is supported + * - 1 - Resynchronization during received data word is disabled + */ +/*@{*/ +#define BP_LPUART_BAUD_RESYNCDIS (16U) /*!< Bit position for LPUART_BAUD_RESYNCDIS. */ +#define BM_LPUART_BAUD_RESYNCDIS (0x00010000U) /*!< Bit mask for LPUART_BAUD_RESYNCDIS. */ +#define BS_LPUART_BAUD_RESYNCDIS (1U) /*!< Bit field size in bits for LPUART_BAUD_RESYNCDIS. */ + +/*! @brief Read current value of the LPUART_BAUD_RESYNCDIS field. */ +#define BR_LPUART_BAUD_RESYNCDIS(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RESYNCDIS)) + +/*! @brief Format value for bitfield LPUART_BAUD_RESYNCDIS. */ +#define BF_LPUART_BAUD_RESYNCDIS(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_RESYNCDIS) & BM_LPUART_BAUD_RESYNCDIS) + +/*! @brief Set the RESYNCDIS field to a new value. */ +#define BW_LPUART_BAUD_RESYNCDIS(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RESYNCDIS) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field BOTHEDGE[17] (RW) + * + * Enables sampling of the received data on both edges of the baud rate clock, + * effectively doubling the number of times the receiver samples the input data + * for a given oversampling ratio. This bit must be set for oversampling ratios + * between x4 and x7 and is optional for higher oversampling ratios. This bit should + * only be changed when the receiver is disabled. + * + * Values: + * - 0 - Receiver samples input data using the rising edge of the baud rate + * clock. + * - 1 - Receiver samples input data using the rising and falling edge of the + * baud rate clock. + */ +/*@{*/ +#define BP_LPUART_BAUD_BOTHEDGE (17U) /*!< Bit position for LPUART_BAUD_BOTHEDGE. */ +#define BM_LPUART_BAUD_BOTHEDGE (0x00020000U) /*!< Bit mask for LPUART_BAUD_BOTHEDGE. */ +#define BS_LPUART_BAUD_BOTHEDGE (1U) /*!< Bit field size in bits for LPUART_BAUD_BOTHEDGE. */ + +/*! @brief Read current value of the LPUART_BAUD_BOTHEDGE field. */ +#define BR_LPUART_BAUD_BOTHEDGE(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_BOTHEDGE)) + +/*! @brief Format value for bitfield LPUART_BAUD_BOTHEDGE. */ +#define BF_LPUART_BAUD_BOTHEDGE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_BOTHEDGE) & BM_LPUART_BAUD_BOTHEDGE) + +/*! @brief Set the BOTHEDGE field to a new value. */ +#define BW_LPUART_BAUD_BOTHEDGE(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_BOTHEDGE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field MATCFG[19:18] (RW) + * + * Configures the match addressing mode used. + * + * Values: + * - 00 - Address Match Wakeup + * - 01 - Idle Match Wakeup + * - 10 - Match On and Match Off + * - 11 - Enables RWU on Data Match and Match On/Off for transmitter CTS input + */ +/*@{*/ +#define BP_LPUART_BAUD_MATCFG (18U) /*!< Bit position for LPUART_BAUD_MATCFG. */ +#define BM_LPUART_BAUD_MATCFG (0x000C0000U) /*!< Bit mask for LPUART_BAUD_MATCFG. */ +#define BS_LPUART_BAUD_MATCFG (2U) /*!< Bit field size in bits for LPUART_BAUD_MATCFG. */ + +/*! @brief Read current value of the LPUART_BAUD_MATCFG field. */ +#define BR_LPUART_BAUD_MATCFG(x) (HW_LPUART_BAUD(x).B.MATCFG) + +/*! @brief Format value for bitfield LPUART_BAUD_MATCFG. */ +#define BF_LPUART_BAUD_MATCFG(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_MATCFG) & BM_LPUART_BAUD_MATCFG) + +/*! @brief Set the MATCFG field to a new value. */ +#define BW_LPUART_BAUD_MATCFG(x, v) (HW_LPUART_BAUD_WR(x, (HW_LPUART_BAUD_RD(x) & ~BM_LPUART_BAUD_MATCFG) | BF_LPUART_BAUD_MATCFG(v))) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field RDMAE[21] (RW) + * + * RDMAE configures the receiver data register full flag, LPUART_STAT[RDRF], to + * generate a DMA request. + * + * Values: + * - 0 - DMA request disabled. + * - 1 - DMA request enabled. + */ +/*@{*/ +#define BP_LPUART_BAUD_RDMAE (21U) /*!< Bit position for LPUART_BAUD_RDMAE. */ +#define BM_LPUART_BAUD_RDMAE (0x00200000U) /*!< Bit mask for LPUART_BAUD_RDMAE. */ +#define BS_LPUART_BAUD_RDMAE (1U) /*!< Bit field size in bits for LPUART_BAUD_RDMAE. */ + +/*! @brief Read current value of the LPUART_BAUD_RDMAE field. */ +#define BR_LPUART_BAUD_RDMAE(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RDMAE)) + +/*! @brief Format value for bitfield LPUART_BAUD_RDMAE. */ +#define BF_LPUART_BAUD_RDMAE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_RDMAE) & BM_LPUART_BAUD_RDMAE) + +/*! @brief Set the RDMAE field to a new value. */ +#define BW_LPUART_BAUD_RDMAE(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_RDMAE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field TDMAE[23] (RW) + * + * TDMAE configures the transmit data register empty flag, LPUART_STAT[TDRE], to + * generate a DMA request. + * + * Values: + * - 0 - DMA request disabled. + * - 1 - DMA request enabled. + */ +/*@{*/ +#define BP_LPUART_BAUD_TDMAE (23U) /*!< Bit position for LPUART_BAUD_TDMAE. */ +#define BM_LPUART_BAUD_TDMAE (0x00800000U) /*!< Bit mask for LPUART_BAUD_TDMAE. */ +#define BS_LPUART_BAUD_TDMAE (1U) /*!< Bit field size in bits for LPUART_BAUD_TDMAE. */ + +/*! @brief Read current value of the LPUART_BAUD_TDMAE field. */ +#define BR_LPUART_BAUD_TDMAE(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_TDMAE)) + +/*! @brief Format value for bitfield LPUART_BAUD_TDMAE. */ +#define BF_LPUART_BAUD_TDMAE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_TDMAE) & BM_LPUART_BAUD_TDMAE) + +/*! @brief Set the TDMAE field to a new value. */ +#define BW_LPUART_BAUD_TDMAE(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_TDMAE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field OSR[28:24] (RW) + * + * This field configures the oversampling ratio for the receiver between 4x + * (00011) and 32x (11111). Writing an invalid oversampling ratio will default to an + * oversampling ratio of 16 (01111). This field should only be changed when the + * transmitter and receiver are both disabled. + */ +/*@{*/ +#define BP_LPUART_BAUD_OSR (24U) /*!< Bit position for LPUART_BAUD_OSR. */ +#define BM_LPUART_BAUD_OSR (0x1F000000U) /*!< Bit mask for LPUART_BAUD_OSR. */ +#define BS_LPUART_BAUD_OSR (5U) /*!< Bit field size in bits for LPUART_BAUD_OSR. */ + +/*! @brief Read current value of the LPUART_BAUD_OSR field. */ +#define BR_LPUART_BAUD_OSR(x) (HW_LPUART_BAUD(x).B.OSR) + +/*! @brief Format value for bitfield LPUART_BAUD_OSR. */ +#define BF_LPUART_BAUD_OSR(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_OSR) & BM_LPUART_BAUD_OSR) + +/*! @brief Set the OSR field to a new value. */ +#define BW_LPUART_BAUD_OSR(x, v) (HW_LPUART_BAUD_WR(x, (HW_LPUART_BAUD_RD(x) & ~BM_LPUART_BAUD_OSR) | BF_LPUART_BAUD_OSR(v))) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field M10[29] (RW) + * + * The M10 bit causes a tenth bit to be part of the serial transmission. This + * bit should only be changed when the transmitter and receiver are both disabled. + * + * Values: + * - 0 - Receiver and transmitter use 8-bit or 9-bit data characters. + * - 1 - Receiver and transmitter use 10-bit data characters. + */ +/*@{*/ +#define BP_LPUART_BAUD_M10 (29U) /*!< Bit position for LPUART_BAUD_M10. */ +#define BM_LPUART_BAUD_M10 (0x20000000U) /*!< Bit mask for LPUART_BAUD_M10. */ +#define BS_LPUART_BAUD_M10 (1U) /*!< Bit field size in bits for LPUART_BAUD_M10. */ + +/*! @brief Read current value of the LPUART_BAUD_M10 field. */ +#define BR_LPUART_BAUD_M10(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_M10)) + +/*! @brief Format value for bitfield LPUART_BAUD_M10. */ +#define BF_LPUART_BAUD_M10(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_M10) & BM_LPUART_BAUD_M10) + +/*! @brief Set the M10 field to a new value. */ +#define BW_LPUART_BAUD_M10(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_M10) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field MAEN2[30] (RW) + * + * Values: + * - 0 - Normal operation. + * - 1 - Enables automatic address matching or data matching mode for MATCH[MA2]. + */ +/*@{*/ +#define BP_LPUART_BAUD_MAEN2 (30U) /*!< Bit position for LPUART_BAUD_MAEN2. */ +#define BM_LPUART_BAUD_MAEN2 (0x40000000U) /*!< Bit mask for LPUART_BAUD_MAEN2. */ +#define BS_LPUART_BAUD_MAEN2 (1U) /*!< Bit field size in bits for LPUART_BAUD_MAEN2. */ + +/*! @brief Read current value of the LPUART_BAUD_MAEN2 field. */ +#define BR_LPUART_BAUD_MAEN2(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_MAEN2)) + +/*! @brief Format value for bitfield LPUART_BAUD_MAEN2. */ +#define BF_LPUART_BAUD_MAEN2(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_MAEN2) & BM_LPUART_BAUD_MAEN2) + +/*! @brief Set the MAEN2 field to a new value. */ +#define BW_LPUART_BAUD_MAEN2(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_MAEN2) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_BAUD, field MAEN1[31] (RW) + * + * Values: + * - 0 - Normal operation. + * - 1 - Enables automatic address matching or data matching mode for MATCH[MA1]. + */ +/*@{*/ +#define BP_LPUART_BAUD_MAEN1 (31U) /*!< Bit position for LPUART_BAUD_MAEN1. */ +#define BM_LPUART_BAUD_MAEN1 (0x80000000U) /*!< Bit mask for LPUART_BAUD_MAEN1. */ +#define BS_LPUART_BAUD_MAEN1 (1U) /*!< Bit field size in bits for LPUART_BAUD_MAEN1. */ + +/*! @brief Read current value of the LPUART_BAUD_MAEN1 field. */ +#define BR_LPUART_BAUD_MAEN1(x) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_MAEN1)) + +/*! @brief Format value for bitfield LPUART_BAUD_MAEN1. */ +#define BF_LPUART_BAUD_MAEN1(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_BAUD_MAEN1) & BM_LPUART_BAUD_MAEN1) + +/*! @brief Set the MAEN1 field to a new value. */ +#define BW_LPUART_BAUD_MAEN1(x, v) (BITBAND_ACCESS32(HW_LPUART_BAUD_ADDR(x), BP_LPUART_BAUD_MAEN1) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LPUART_STAT - LPUART Status Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_STAT - LPUART Status Register (RW) + * + * Reset value: 0x00C00000U + */ +typedef union _hw_lpuart_stat +{ + uint32_t U; + struct _hw_lpuart_stat_bitfields + { + uint32_t RESERVED0 : 14; /*!< [13:0] */ + uint32_t MA2F : 1; /*!< [14] Match 2 Flag */ + uint32_t MA1F : 1; /*!< [15] Match 1 Flag */ + uint32_t PF : 1; /*!< [16] Parity Error Flag */ + uint32_t FE : 1; /*!< [17] Framing Error Flag */ + uint32_t NF : 1; /*!< [18] Noise Flag */ + uint32_t OR : 1; /*!< [19] Receiver Overrun Flag */ + uint32_t IDLE : 1; /*!< [20] Idle Line Flag */ + uint32_t RDRF : 1; /*!< [21] Receive Data Register Full Flag */ + uint32_t TC : 1; /*!< [22] Transmission Complete Flag */ + uint32_t TDRE : 1; /*!< [23] Transmit Data Register Empty Flag */ + uint32_t RAF : 1; /*!< [24] Receiver Active Flag */ + uint32_t LBKDE : 1; /*!< [25] LIN Break Detection Enable */ + uint32_t BRK13 : 1; /*!< [26] Break Character Generation Length */ + uint32_t RWUID : 1; /*!< [27] Receive Wake Up Idle Detect */ + uint32_t RXINV : 1; /*!< [28] Receive Data Inversion */ + uint32_t MSBF : 1; /*!< [29] MSB First */ + uint32_t RXEDGIF : 1; /*!< [30] LPUART_RX Pin Active Edge Interrupt + * Flag */ + uint32_t LBKDIF : 1; /*!< [31] LIN Break Detect Interrupt Flag */ + } B; +} hw_lpuart_stat_t; + +/*! + * @name Constants and macros for entire LPUART_STAT register + */ +/*@{*/ +#define HW_LPUART_STAT_ADDR(x) ((x) + 0x4U) + +#define HW_LPUART_STAT(x) (*(__IO hw_lpuart_stat_t *) HW_LPUART_STAT_ADDR(x)) +#define HW_LPUART_STAT_RD(x) (HW_LPUART_STAT(x).U) +#define HW_LPUART_STAT_WR(x, v) (HW_LPUART_STAT(x).U = (v)) +#define HW_LPUART_STAT_SET(x, v) (HW_LPUART_STAT_WR(x, HW_LPUART_STAT_RD(x) | (v))) +#define HW_LPUART_STAT_CLR(x, v) (HW_LPUART_STAT_WR(x, HW_LPUART_STAT_RD(x) & ~(v))) +#define HW_LPUART_STAT_TOG(x, v) (HW_LPUART_STAT_WR(x, HW_LPUART_STAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_STAT bitfields + */ + +/*! + * @name Register LPUART_STAT, field MA2F[14] (W1C) + * + * MA2F is set whenever the next character to be read from LPUART_DATA matches + * MA2. To clear MA2F, write a logic one to the MA2F. + * + * Values: + * - 0 - Received data is not equal to MA2 + * - 1 - Received data is equal to MA2 + */ +/*@{*/ +#define BP_LPUART_STAT_MA2F (14U) /*!< Bit position for LPUART_STAT_MA2F. */ +#define BM_LPUART_STAT_MA2F (0x00004000U) /*!< Bit mask for LPUART_STAT_MA2F. */ +#define BS_LPUART_STAT_MA2F (1U) /*!< Bit field size in bits for LPUART_STAT_MA2F. */ + +/*! @brief Read current value of the LPUART_STAT_MA2F field. */ +#define BR_LPUART_STAT_MA2F(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MA2F)) + +/*! @brief Format value for bitfield LPUART_STAT_MA2F. */ +#define BF_LPUART_STAT_MA2F(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_MA2F) & BM_LPUART_STAT_MA2F) + +/*! @brief Set the MA2F field to a new value. */ +#define BW_LPUART_STAT_MA2F(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MA2F) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field MA1F[15] (W1C) + * + * MA1F is set whenever the next character to be read from LPUART_DATA matches + * MA1. To clear MA1F, write a logic one to the MA1F. + * + * Values: + * - 0 - Received data is not equal to MA1 + * - 1 - Received data is equal to MA1 + */ +/*@{*/ +#define BP_LPUART_STAT_MA1F (15U) /*!< Bit position for LPUART_STAT_MA1F. */ +#define BM_LPUART_STAT_MA1F (0x00008000U) /*!< Bit mask for LPUART_STAT_MA1F. */ +#define BS_LPUART_STAT_MA1F (1U) /*!< Bit field size in bits for LPUART_STAT_MA1F. */ + +/*! @brief Read current value of the LPUART_STAT_MA1F field. */ +#define BR_LPUART_STAT_MA1F(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MA1F)) + +/*! @brief Format value for bitfield LPUART_STAT_MA1F. */ +#define BF_LPUART_STAT_MA1F(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_MA1F) & BM_LPUART_STAT_MA1F) + +/*! @brief Set the MA1F field to a new value. */ +#define BW_LPUART_STAT_MA1F(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MA1F) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field PF[16] (W1C) + * + * PF is set whenever the next character to be read from LPUART_DATA was + * received when parity is enabled (PE = 1) and the parity bit in the received character + * does not agree with the expected parity value. To clear PF, write a logic one + * to the PF. + * + * Values: + * - 0 - No parity error. + * - 1 - Parity error. + */ +/*@{*/ +#define BP_LPUART_STAT_PF (16U) /*!< Bit position for LPUART_STAT_PF. */ +#define BM_LPUART_STAT_PF (0x00010000U) /*!< Bit mask for LPUART_STAT_PF. */ +#define BS_LPUART_STAT_PF (1U) /*!< Bit field size in bits for LPUART_STAT_PF. */ + +/*! @brief Read current value of the LPUART_STAT_PF field. */ +#define BR_LPUART_STAT_PF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_PF)) + +/*! @brief Format value for bitfield LPUART_STAT_PF. */ +#define BF_LPUART_STAT_PF(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_PF) & BM_LPUART_STAT_PF) + +/*! @brief Set the PF field to a new value. */ +#define BW_LPUART_STAT_PF(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_PF) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field FE[17] (W1C) + * + * FE is set whenever the next character to be read from LPUART_DATA was + * received with logic 0 detected where a stop bit was expected. To clear NF, write + * logic one to the NF. + * + * Values: + * - 0 - No framing error detected. This does not guarantee the framing is + * correct. + * - 1 - Framing error. + */ +/*@{*/ +#define BP_LPUART_STAT_FE (17U) /*!< Bit position for LPUART_STAT_FE. */ +#define BM_LPUART_STAT_FE (0x00020000U) /*!< Bit mask for LPUART_STAT_FE. */ +#define BS_LPUART_STAT_FE (1U) /*!< Bit field size in bits for LPUART_STAT_FE. */ + +/*! @brief Read current value of the LPUART_STAT_FE field. */ +#define BR_LPUART_STAT_FE(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_FE)) + +/*! @brief Format value for bitfield LPUART_STAT_FE. */ +#define BF_LPUART_STAT_FE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_FE) & BM_LPUART_STAT_FE) + +/*! @brief Set the FE field to a new value. */ +#define BW_LPUART_STAT_FE(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_FE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field NF[18] (W1C) + * + * The advanced sampling technique used in the receiver takes three samples in + * each of the received bits. If any of these samples disagrees with the rest of + * the samples within any bit time in the frame then noise is detected for that + * character. NF is set whenever the next character to be read from LPUART_DATA was + * received with noise detected within the character. To clear NF, write logic + * one to the NF. + * + * Values: + * - 0 - No noise detected. + * - 1 - Noise detected in the received character in LPUART_DATA. + */ +/*@{*/ +#define BP_LPUART_STAT_NF (18U) /*!< Bit position for LPUART_STAT_NF. */ +#define BM_LPUART_STAT_NF (0x00040000U) /*!< Bit mask for LPUART_STAT_NF. */ +#define BS_LPUART_STAT_NF (1U) /*!< Bit field size in bits for LPUART_STAT_NF. */ + +/*! @brief Read current value of the LPUART_STAT_NF field. */ +#define BR_LPUART_STAT_NF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_NF)) + +/*! @brief Format value for bitfield LPUART_STAT_NF. */ +#define BF_LPUART_STAT_NF(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_NF) & BM_LPUART_STAT_NF) + +/*! @brief Set the NF field to a new value. */ +#define BW_LPUART_STAT_NF(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_NF) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field OR[19] (W1C) + * + * OR is set when software fails to prevent the receive data register from + * overflowing with data. The OR bit is set immediately after the stop bit has been + * completely received for the dataword that overflows the buffer and all the other + * error flags (FE, NF, and PF) are prevented from setting. The data in the + * shift register is lost, but the data already in the LPUART data registers is not + * affected. If LBKDE is enabled and a LIN Break is detected, the OR field asserts + * if LBKDIF is not cleared before the next data character is received. While + * the OR flag is set, no additional data is stored in the data buffer even if + * sufficient room exists. To clear OR, write logic 1 to the OR flag. + * + * Values: + * - 0 - No overrun. + * - 1 - Receive overrun (new LPUART data lost). + */ +/*@{*/ +#define BP_LPUART_STAT_OR (19U) /*!< Bit position for LPUART_STAT_OR. */ +#define BM_LPUART_STAT_OR (0x00080000U) /*!< Bit mask for LPUART_STAT_OR. */ +#define BS_LPUART_STAT_OR (1U) /*!< Bit field size in bits for LPUART_STAT_OR. */ + +/*! @brief Read current value of the LPUART_STAT_OR field. */ +#define BR_LPUART_STAT_OR(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_OR)) + +/*! @brief Format value for bitfield LPUART_STAT_OR. */ +#define BF_LPUART_STAT_OR(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_OR) & BM_LPUART_STAT_OR) + +/*! @brief Set the OR field to a new value. */ +#define BW_LPUART_STAT_OR(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_OR) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field IDLE[20] (W1C) + * + * IDLE is set when the LPUART receive line becomes idle for a full character + * time after a period of activity. When ILT is cleared, the receiver starts + * counting idle bit times after the start bit. If the receive character is all 1s, + * these bit times and the stop bits time count toward the full character time of + * logic high, 10 to 13 bit times, needed for the receiver to detect an idle line. + * When ILT is set, the receiver doesn't start counting idle bit times until + * after the stop bits. The stop bits and any logic high bit times at the end of the + * previous character do not count toward the full character time of logic high + * needed for the receiver to detect an idle line. To clear IDLE, write logic 1 to + * the IDLE flag. After IDLE has been cleared, it cannot become set again until + * after a new character has been stored in the receive buffer or a LIN break + * character has set the LBKDIF flag . IDLE is set only once even if the receive + * line remains idle for an extended period. + * + * Values: + * - 0 - No idle line detected. + * - 1 - Idle line was detected. + */ +/*@{*/ +#define BP_LPUART_STAT_IDLE (20U) /*!< Bit position for LPUART_STAT_IDLE. */ +#define BM_LPUART_STAT_IDLE (0x00100000U) /*!< Bit mask for LPUART_STAT_IDLE. */ +#define BS_LPUART_STAT_IDLE (1U) /*!< Bit field size in bits for LPUART_STAT_IDLE. */ + +/*! @brief Read current value of the LPUART_STAT_IDLE field. */ +#define BR_LPUART_STAT_IDLE(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_IDLE)) + +/*! @brief Format value for bitfield LPUART_STAT_IDLE. */ +#define BF_LPUART_STAT_IDLE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_IDLE) & BM_LPUART_STAT_IDLE) + +/*! @brief Set the IDLE field to a new value. */ +#define BW_LPUART_STAT_IDLE(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_IDLE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field RDRF[21] (RO) + * + * RDRF is set when the receive buffer (LPUART_DATA) is full. To clear RDRF, + * read the LPUART_DATA register. A character that is in the process of being + * received does not cause a change in RDRF until the entire character is received. + * Even if RDRF is set, the character will continue to be received until an overrun + * condition occurs once the entire character is received. + * + * Values: + * - 0 - Receive data buffer empty. + * - 1 - Receive data buffer full. + */ +/*@{*/ +#define BP_LPUART_STAT_RDRF (21U) /*!< Bit position for LPUART_STAT_RDRF. */ +#define BM_LPUART_STAT_RDRF (0x00200000U) /*!< Bit mask for LPUART_STAT_RDRF. */ +#define BS_LPUART_STAT_RDRF (1U) /*!< Bit field size in bits for LPUART_STAT_RDRF. */ + +/*! @brief Read current value of the LPUART_STAT_RDRF field. */ +#define BR_LPUART_STAT_RDRF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RDRF)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field TC[22] (RO) + * + * TC is cleared when there is a transmission in progress or when a preamble or + * break character is loaded. TC is set when the transmit buffer is empty and no + * data, preamble, or break character is being transmitted. When TC is set, the + * transmit data output signal becomes idle (logic 1). TC is cleared by writing to + * LPUART_DATA to transmit new data, queuing a preamble by clearing and then + * setting LPUART_CTRL[TE], queuing a break character by writing 1 to + * LPUART_CTRL[SBK]. + * + * Values: + * - 0 - Transmitter active (sending data, a preamble, or a break). + * - 1 - Transmitter idle (transmission activity complete). + */ +/*@{*/ +#define BP_LPUART_STAT_TC (22U) /*!< Bit position for LPUART_STAT_TC. */ +#define BM_LPUART_STAT_TC (0x00400000U) /*!< Bit mask for LPUART_STAT_TC. */ +#define BS_LPUART_STAT_TC (1U) /*!< Bit field size in bits for LPUART_STAT_TC. */ + +/*! @brief Read current value of the LPUART_STAT_TC field. */ +#define BR_LPUART_STAT_TC(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_TC)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field TDRE[23] (RO) + * + * TDRE will set when the transmit data register (LPUART_DATA) is empty. To + * clear TDRE, write to the LPUART data register (LPUART_DATA). TDRE is not affected + * by a character that is in the process of being transmitted, it is updated at + * the start of each transmitted character. + * + * Values: + * - 0 - Transmit data buffer full. + * - 1 - Transmit data buffer empty. + */ +/*@{*/ +#define BP_LPUART_STAT_TDRE (23U) /*!< Bit position for LPUART_STAT_TDRE. */ +#define BM_LPUART_STAT_TDRE (0x00800000U) /*!< Bit mask for LPUART_STAT_TDRE. */ +#define BS_LPUART_STAT_TDRE (1U) /*!< Bit field size in bits for LPUART_STAT_TDRE. */ + +/*! @brief Read current value of the LPUART_STAT_TDRE field. */ +#define BR_LPUART_STAT_TDRE(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_TDRE)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field RAF[24] (RO) + * + * RAF is set when the receiver detects the beginning of a valid start bit, and + * RAF is cleared automatically when the receiver detects an idle line. + * + * Values: + * - 0 - LPUART receiver idle waiting for a start bit. + * - 1 - LPUART receiver active (LPUART_RX input not idle). + */ +/*@{*/ +#define BP_LPUART_STAT_RAF (24U) /*!< Bit position for LPUART_STAT_RAF. */ +#define BM_LPUART_STAT_RAF (0x01000000U) /*!< Bit mask for LPUART_STAT_RAF. */ +#define BS_LPUART_STAT_RAF (1U) /*!< Bit field size in bits for LPUART_STAT_RAF. */ + +/*! @brief Read current value of the LPUART_STAT_RAF field. */ +#define BR_LPUART_STAT_RAF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RAF)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field LBKDE[25] (RW) + * + * LBKDE selects a longer break character detection length. While LBKDE is set, + * receive data is not stored in the receive data buffer. + * + * Values: + * - 0 - Break character is detected at length 10 bit times (if M = 0, SBNS = 0) + * or 11 (if M = 1, SBNS = 0 or M = 0, SBNS = 1) or 12 (if M = 1, SBNS = 1 + * or M10 = 1, SNBS = 0) or 13 (if M10 = 1, SNBS = 1). + * - 1 - Break character is detected at length of 11 bit times (if M = 0, SBNS = + * 0) or 12 (if M = 1, SBNS = 0 or M = 0, SBNS = 1) or 14 (if M = 1, SBNS = + * 1 or M10 = 1, SNBS = 0) or 15 (if M10 = 1, SNBS = 1). + */ +/*@{*/ +#define BP_LPUART_STAT_LBKDE (25U) /*!< Bit position for LPUART_STAT_LBKDE. */ +#define BM_LPUART_STAT_LBKDE (0x02000000U) /*!< Bit mask for LPUART_STAT_LBKDE. */ +#define BS_LPUART_STAT_LBKDE (1U) /*!< Bit field size in bits for LPUART_STAT_LBKDE. */ + +/*! @brief Read current value of the LPUART_STAT_LBKDE field. */ +#define BR_LPUART_STAT_LBKDE(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_LBKDE)) + +/*! @brief Format value for bitfield LPUART_STAT_LBKDE. */ +#define BF_LPUART_STAT_LBKDE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_LBKDE) & BM_LPUART_STAT_LBKDE) + +/*! @brief Set the LBKDE field to a new value. */ +#define BW_LPUART_STAT_LBKDE(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_LBKDE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field BRK13[26] (RW) + * + * BRK13 selects a longer transmitted break character length. Detection of a + * framing error is not affected by the state of this bit. This bit should only be + * changed when the transmitter is disabled. + * + * Values: + * - 0 - Break character is transmitted with length of 10 bit times (if M = 0, + * SBNS = 0) or 11 (if M = 1, SBNS = 0 or M = 0, SBNS = 1) or 12 (if M = 1, + * SBNS = 1 or M10 = 1, SNBS = 0) or 13 (if M10 = 1, SNBS = 1). + * - 1 - Break character is transmitted with length of 13 bit times (if M = 0, + * SBNS = 0) or 14 (if M = 1, SBNS = 0 or M = 0, SBNS = 1) or 15 (if M = 1, + * SBNS = 1 or M10 = 1, SNBS = 0) or 16 (if M10 = 1, SNBS = 1). + */ +/*@{*/ +#define BP_LPUART_STAT_BRK13 (26U) /*!< Bit position for LPUART_STAT_BRK13. */ +#define BM_LPUART_STAT_BRK13 (0x04000000U) /*!< Bit mask for LPUART_STAT_BRK13. */ +#define BS_LPUART_STAT_BRK13 (1U) /*!< Bit field size in bits for LPUART_STAT_BRK13. */ + +/*! @brief Read current value of the LPUART_STAT_BRK13 field. */ +#define BR_LPUART_STAT_BRK13(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_BRK13)) + +/*! @brief Format value for bitfield LPUART_STAT_BRK13. */ +#define BF_LPUART_STAT_BRK13(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_BRK13) & BM_LPUART_STAT_BRK13) + +/*! @brief Set the BRK13 field to a new value. */ +#define BW_LPUART_STAT_BRK13(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_BRK13) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field RWUID[27] (RW) + * + * For RWU on idle character, RWUID controls whether the idle character that + * wakes up the receiver sets the IDLE bit. For address match wakeup, RWUID controls + * if the IDLE bit is set when the address does not match. This bit should only + * be changed when the receiver is disabled. + * + * Values: + * - 0 - During receive standby state (RWU = 1), the IDLE bit does not get set + * upon detection of an idle character. During address match wakeup, the IDLE + * bit does not get set when an address does not match. + * - 1 - During receive standby state (RWU = 1), the IDLE bit gets set upon + * detection of an idle character. During address match wakeup, the IDLE bit does + * get set when an address does not match. + */ +/*@{*/ +#define BP_LPUART_STAT_RWUID (27U) /*!< Bit position for LPUART_STAT_RWUID. */ +#define BM_LPUART_STAT_RWUID (0x08000000U) /*!< Bit mask for LPUART_STAT_RWUID. */ +#define BS_LPUART_STAT_RWUID (1U) /*!< Bit field size in bits for LPUART_STAT_RWUID. */ + +/*! @brief Read current value of the LPUART_STAT_RWUID field. */ +#define BR_LPUART_STAT_RWUID(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RWUID)) + +/*! @brief Format value for bitfield LPUART_STAT_RWUID. */ +#define BF_LPUART_STAT_RWUID(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_RWUID) & BM_LPUART_STAT_RWUID) + +/*! @brief Set the RWUID field to a new value. */ +#define BW_LPUART_STAT_RWUID(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RWUID) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field RXINV[28] (RW) + * + * Setting this bit reverses the polarity of the received data input. Setting + * RXINV inverts the LPUART_RX input for all cases: data bits, start and stop bits, + * break, and idle. + * + * Values: + * - 0 - Receive data not inverted. + * - 1 - Receive data inverted. + */ +/*@{*/ +#define BP_LPUART_STAT_RXINV (28U) /*!< Bit position for LPUART_STAT_RXINV. */ +#define BM_LPUART_STAT_RXINV (0x10000000U) /*!< Bit mask for LPUART_STAT_RXINV. */ +#define BS_LPUART_STAT_RXINV (1U) /*!< Bit field size in bits for LPUART_STAT_RXINV. */ + +/*! @brief Read current value of the LPUART_STAT_RXINV field. */ +#define BR_LPUART_STAT_RXINV(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RXINV)) + +/*! @brief Format value for bitfield LPUART_STAT_RXINV. */ +#define BF_LPUART_STAT_RXINV(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_RXINV) & BM_LPUART_STAT_RXINV) + +/*! @brief Set the RXINV field to a new value. */ +#define BW_LPUART_STAT_RXINV(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RXINV) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field MSBF[29] (RW) + * + * Setting this bit reverses the order of the bits that are transmitted and + * received on the wire. This bit does not affect the polarity of the bits, the + * location of the parity bit or the location of the start or stop bits. This bit + * should only be changed when the transmitter and receiver are both disabled. + * + * Values: + * - 0 - LSB (bit0) is the first bit that is transmitted following the start + * bit. Further, the first bit received after the start bit is identified as + * bit0. + * - 1 - MSB (bit9, bit8, bit7 or bit6) is the first bit that is transmitted + * following the start bit depending on the setting of CTRL[M], CTRL[PE] and + * BAUD[M10]. Further, the first bit received after the start bit is identified + * as bit9, bit8, bit7 or bit6 depending on the setting of CTRL[M] and + * CTRL[PE]. + */ +/*@{*/ +#define BP_LPUART_STAT_MSBF (29U) /*!< Bit position for LPUART_STAT_MSBF. */ +#define BM_LPUART_STAT_MSBF (0x20000000U) /*!< Bit mask for LPUART_STAT_MSBF. */ +#define BS_LPUART_STAT_MSBF (1U) /*!< Bit field size in bits for LPUART_STAT_MSBF. */ + +/*! @brief Read current value of the LPUART_STAT_MSBF field. */ +#define BR_LPUART_STAT_MSBF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MSBF)) + +/*! @brief Format value for bitfield LPUART_STAT_MSBF. */ +#define BF_LPUART_STAT_MSBF(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_MSBF) & BM_LPUART_STAT_MSBF) + +/*! @brief Set the MSBF field to a new value. */ +#define BW_LPUART_STAT_MSBF(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_MSBF) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field RXEDGIF[30] (W1C) + * + * RXEDGIF is set when an active edge, falling if RXINV = 0, rising if RXINV=1, + * on the LPUART_RX pin occurs. RXEDGIF is cleared by writing a 1 to it. + * + * Values: + * - 0 - No active edge on the receive pin has occurred. + * - 1 - An active edge on the receive pin has occurred. + */ +/*@{*/ +#define BP_LPUART_STAT_RXEDGIF (30U) /*!< Bit position for LPUART_STAT_RXEDGIF. */ +#define BM_LPUART_STAT_RXEDGIF (0x40000000U) /*!< Bit mask for LPUART_STAT_RXEDGIF. */ +#define BS_LPUART_STAT_RXEDGIF (1U) /*!< Bit field size in bits for LPUART_STAT_RXEDGIF. */ + +/*! @brief Read current value of the LPUART_STAT_RXEDGIF field. */ +#define BR_LPUART_STAT_RXEDGIF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RXEDGIF)) + +/*! @brief Format value for bitfield LPUART_STAT_RXEDGIF. */ +#define BF_LPUART_STAT_RXEDGIF(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_RXEDGIF) & BM_LPUART_STAT_RXEDGIF) + +/*! @brief Set the RXEDGIF field to a new value. */ +#define BW_LPUART_STAT_RXEDGIF(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_RXEDGIF) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_STAT, field LBKDIF[31] (W1C) + * + * LBKDIF is set when the LIN break detect circuitry is enabled and a LIN break + * character is detected. LBKDIF is cleared by writing a 1 to it. + * + * Values: + * - 0 - No LIN break character has been detected. + * - 1 - LIN break character has been detected. + */ +/*@{*/ +#define BP_LPUART_STAT_LBKDIF (31U) /*!< Bit position for LPUART_STAT_LBKDIF. */ +#define BM_LPUART_STAT_LBKDIF (0x80000000U) /*!< Bit mask for LPUART_STAT_LBKDIF. */ +#define BS_LPUART_STAT_LBKDIF (1U) /*!< Bit field size in bits for LPUART_STAT_LBKDIF. */ + +/*! @brief Read current value of the LPUART_STAT_LBKDIF field. */ +#define BR_LPUART_STAT_LBKDIF(x) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_LBKDIF)) + +/*! @brief Format value for bitfield LPUART_STAT_LBKDIF. */ +#define BF_LPUART_STAT_LBKDIF(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_STAT_LBKDIF) & BM_LPUART_STAT_LBKDIF) + +/*! @brief Set the LBKDIF field to a new value. */ +#define BW_LPUART_STAT_LBKDIF(x, v) (BITBAND_ACCESS32(HW_LPUART_STAT_ADDR(x), BP_LPUART_STAT_LBKDIF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LPUART_CTRL - LPUART Control Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_CTRL - LPUART Control Register (RW) + * + * Reset value: 0x00000000U + * + * This read/write register controls various optional features of the LPUART + * system. This register should only be altered when the transmitter and receiver + * are both disabled. + */ +typedef union _hw_lpuart_ctrl +{ + uint32_t U; + struct _hw_lpuart_ctrl_bitfields + { + uint32_t PT : 1; /*!< [0] Parity Type */ + uint32_t PE : 1; /*!< [1] Parity Enable */ + uint32_t ILT : 1; /*!< [2] Idle Line Type Select */ + uint32_t WAKE : 1; /*!< [3] Receiver Wakeup Method Select */ + uint32_t M : 1; /*!< [4] 9-Bit or 8-Bit Mode Select */ + uint32_t RSRC : 1; /*!< [5] Receiver Source Select */ + uint32_t DOZEEN : 1; /*!< [6] Doze Enable */ + uint32_t LOOPS : 1; /*!< [7] Loop Mode Select */ + uint32_t IDLECFG : 3; /*!< [10:8] Idle Configuration */ + uint32_t RESERVED0 : 3; /*!< [13:11] */ + uint32_t MA2IE : 1; /*!< [14] Match 2 Interrupt Enable */ + uint32_t MA1IE : 1; /*!< [15] Match 1 Interrupt Enable */ + uint32_t SBK : 1; /*!< [16] Send Break */ + uint32_t RWU : 1; /*!< [17] Receiver Wakeup Control */ + uint32_t RE : 1; /*!< [18] Receiver Enable */ + uint32_t TE : 1; /*!< [19] Transmitter Enable */ + uint32_t ILIE : 1; /*!< [20] Idle Line Interrupt Enable */ + uint32_t RIE : 1; /*!< [21] Receiver Interrupt Enable */ + uint32_t TCIE : 1; /*!< [22] Transmission Complete Interrupt Enable + * for */ + uint32_t TIE : 1; /*!< [23] Transmit Interrupt Enable */ + uint32_t PEIE : 1; /*!< [24] Parity Error Interrupt Enable */ + uint32_t FEIE : 1; /*!< [25] Framing Error Interrupt Enable */ + uint32_t NEIE : 1; /*!< [26] Noise Error Interrupt Enable */ + uint32_t ORIE : 1; /*!< [27] Overrun Interrupt Enable */ + uint32_t TXINV : 1; /*!< [28] Transmit Data Inversion */ + uint32_t TXDIR : 1; /*!< [29] LPUART_TX Pin Direction in Single-Wire + * Mode */ + uint32_t R9T8 : 1; /*!< [30] Receive Bit 9 / Transmit Bit 8 */ + uint32_t R8T9 : 1; /*!< [31] Receive Bit 8 / Transmit Bit 9 */ + } B; +} hw_lpuart_ctrl_t; + +/*! + * @name Constants and macros for entire LPUART_CTRL register + */ +/*@{*/ +#define HW_LPUART_CTRL_ADDR(x) ((x) + 0x8U) + +#define HW_LPUART_CTRL(x) (*(__IO hw_lpuart_ctrl_t *) HW_LPUART_CTRL_ADDR(x)) +#define HW_LPUART_CTRL_RD(x) (HW_LPUART_CTRL(x).U) +#define HW_LPUART_CTRL_WR(x, v) (HW_LPUART_CTRL(x).U = (v)) +#define HW_LPUART_CTRL_SET(x, v) (HW_LPUART_CTRL_WR(x, HW_LPUART_CTRL_RD(x) | (v))) +#define HW_LPUART_CTRL_CLR(x, v) (HW_LPUART_CTRL_WR(x, HW_LPUART_CTRL_RD(x) & ~(v))) +#define HW_LPUART_CTRL_TOG(x, v) (HW_LPUART_CTRL_WR(x, HW_LPUART_CTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_CTRL bitfields + */ + +/*! + * @name Register LPUART_CTRL, field PT[0] (RW) + * + * Provided parity is enabled (PE = 1), this bit selects even or odd parity. Odd + * parity means the total number of 1s in the data character, including the + * parity bit, is odd. Even parity means the total number of 1s in the data + * character, including the parity bit, is even. + * + * Values: + * - 0 - Even parity. + * - 1 - Odd parity. + */ +/*@{*/ +#define BP_LPUART_CTRL_PT (0U) /*!< Bit position for LPUART_CTRL_PT. */ +#define BM_LPUART_CTRL_PT (0x00000001U) /*!< Bit mask for LPUART_CTRL_PT. */ +#define BS_LPUART_CTRL_PT (1U) /*!< Bit field size in bits for LPUART_CTRL_PT. */ + +/*! @brief Read current value of the LPUART_CTRL_PT field. */ +#define BR_LPUART_CTRL_PT(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PT)) + +/*! @brief Format value for bitfield LPUART_CTRL_PT. */ +#define BF_LPUART_CTRL_PT(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_PT) & BM_LPUART_CTRL_PT) + +/*! @brief Set the PT field to a new value. */ +#define BW_LPUART_CTRL_PT(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PT) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field PE[1] (RW) + * + * Enables hardware parity generation and checking. When parity is enabled, the + * bit immediately before the stop bit is treated as the parity bit. + * + * Values: + * - 0 - No hardware parity generation or checking. + * - 1 - Parity enabled. + */ +/*@{*/ +#define BP_LPUART_CTRL_PE (1U) /*!< Bit position for LPUART_CTRL_PE. */ +#define BM_LPUART_CTRL_PE (0x00000002U) /*!< Bit mask for LPUART_CTRL_PE. */ +#define BS_LPUART_CTRL_PE (1U) /*!< Bit field size in bits for LPUART_CTRL_PE. */ + +/*! @brief Read current value of the LPUART_CTRL_PE field. */ +#define BR_LPUART_CTRL_PE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PE)) + +/*! @brief Format value for bitfield LPUART_CTRL_PE. */ +#define BF_LPUART_CTRL_PE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_PE) & BM_LPUART_CTRL_PE) + +/*! @brief Set the PE field to a new value. */ +#define BW_LPUART_CTRL_PE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field ILT[2] (RW) + * + * Determines when the receiver starts counting logic 1s as idle character bits. + * The count begins either after a valid start bit or after the stop bit. If the + * count begins after the start bit, then a string of logic 1s preceding the + * stop bit can cause false recognition of an idle character. Beginning the count + * after the stop bit avoids false idle character recognition, but requires + * properly synchronized transmissions. In case the LPUART is programmed with ILT = 1, a + * logic 0 is automatically shifted after a received stop bit, therefore + * resetting the idle count. + * + * Values: + * - 0 - Idle character bit count starts after start bit. + * - 1 - Idle character bit count starts after stop bit. + */ +/*@{*/ +#define BP_LPUART_CTRL_ILT (2U) /*!< Bit position for LPUART_CTRL_ILT. */ +#define BM_LPUART_CTRL_ILT (0x00000004U) /*!< Bit mask for LPUART_CTRL_ILT. */ +#define BS_LPUART_CTRL_ILT (1U) /*!< Bit field size in bits for LPUART_CTRL_ILT. */ + +/*! @brief Read current value of the LPUART_CTRL_ILT field. */ +#define BR_LPUART_CTRL_ILT(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ILT)) + +/*! @brief Format value for bitfield LPUART_CTRL_ILT. */ +#define BF_LPUART_CTRL_ILT(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_ILT) & BM_LPUART_CTRL_ILT) + +/*! @brief Set the ILT field to a new value. */ +#define BW_LPUART_CTRL_ILT(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ILT) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field WAKE[3] (RW) + * + * Determines which condition wakes the LPUART when RWU=1: Address mark in the + * most significant bit position of a received data character, or An idle + * condition on the receive pin input signal. + * + * Values: + * - 0 - Configures RWU for idle-line wakeup. + * - 1 - Configures RWU with address-mark wakeup. + */ +/*@{*/ +#define BP_LPUART_CTRL_WAKE (3U) /*!< Bit position for LPUART_CTRL_WAKE. */ +#define BM_LPUART_CTRL_WAKE (0x00000008U) /*!< Bit mask for LPUART_CTRL_WAKE. */ +#define BS_LPUART_CTRL_WAKE (1U) /*!< Bit field size in bits for LPUART_CTRL_WAKE. */ + +/*! @brief Read current value of the LPUART_CTRL_WAKE field. */ +#define BR_LPUART_CTRL_WAKE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_WAKE)) + +/*! @brief Format value for bitfield LPUART_CTRL_WAKE. */ +#define BF_LPUART_CTRL_WAKE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_WAKE) & BM_LPUART_CTRL_WAKE) + +/*! @brief Set the WAKE field to a new value. */ +#define BW_LPUART_CTRL_WAKE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_WAKE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field M[4] (RW) + * + * Values: + * - 0 - Receiver and transmitter use 8-bit data characters. + * - 1 - Receiver and transmitter use 9-bit data characters. + */ +/*@{*/ +#define BP_LPUART_CTRL_M (4U) /*!< Bit position for LPUART_CTRL_M. */ +#define BM_LPUART_CTRL_M (0x00000010U) /*!< Bit mask for LPUART_CTRL_M. */ +#define BS_LPUART_CTRL_M (1U) /*!< Bit field size in bits for LPUART_CTRL_M. */ + +/*! @brief Read current value of the LPUART_CTRL_M field. */ +#define BR_LPUART_CTRL_M(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_M)) + +/*! @brief Format value for bitfield LPUART_CTRL_M. */ +#define BF_LPUART_CTRL_M(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_M) & BM_LPUART_CTRL_M) + +/*! @brief Set the M field to a new value. */ +#define BW_LPUART_CTRL_M(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_M) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field RSRC[5] (RW) + * + * This field has no meaning or effect unless the LOOPS field is set. When LOOPS + * is set, the RSRC field determines the source for the receiver shift register + * input. + * + * Values: + * - 0 - Provided LOOPS is set, RSRC is cleared, selects internal loop back mode + * and the LPUART does not use the LPUART_RX pin. + * - 1 - Single-wire LPUART mode where the LPUART_TX pin is connected to the + * transmitter output and receiver input. + */ +/*@{*/ +#define BP_LPUART_CTRL_RSRC (5U) /*!< Bit position for LPUART_CTRL_RSRC. */ +#define BM_LPUART_CTRL_RSRC (0x00000020U) /*!< Bit mask for LPUART_CTRL_RSRC. */ +#define BS_LPUART_CTRL_RSRC (1U) /*!< Bit field size in bits for LPUART_CTRL_RSRC. */ + +/*! @brief Read current value of the LPUART_CTRL_RSRC field. */ +#define BR_LPUART_CTRL_RSRC(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RSRC)) + +/*! @brief Format value for bitfield LPUART_CTRL_RSRC. */ +#define BF_LPUART_CTRL_RSRC(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_RSRC) & BM_LPUART_CTRL_RSRC) + +/*! @brief Set the RSRC field to a new value. */ +#define BW_LPUART_CTRL_RSRC(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RSRC) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field DOZEEN[6] (RW) + * + * Values: + * - 0 - LPUART is enabled in Doze mode. + * - 1 - LPUART is disabled in Doze mode. + */ +/*@{*/ +#define BP_LPUART_CTRL_DOZEEN (6U) /*!< Bit position for LPUART_CTRL_DOZEEN. */ +#define BM_LPUART_CTRL_DOZEEN (0x00000040U) /*!< Bit mask for LPUART_CTRL_DOZEEN. */ +#define BS_LPUART_CTRL_DOZEEN (1U) /*!< Bit field size in bits for LPUART_CTRL_DOZEEN. */ + +/*! @brief Read current value of the LPUART_CTRL_DOZEEN field. */ +#define BR_LPUART_CTRL_DOZEEN(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_DOZEEN)) + +/*! @brief Format value for bitfield LPUART_CTRL_DOZEEN. */ +#define BF_LPUART_CTRL_DOZEEN(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_DOZEEN) & BM_LPUART_CTRL_DOZEEN) + +/*! @brief Set the DOZEEN field to a new value. */ +#define BW_LPUART_CTRL_DOZEEN(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_DOZEEN) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field LOOPS[7] (RW) + * + * When LOOPS is set, the LPUART_RX pin is disconnected from the LPUART and the + * transmitter output is internally connected to the receiver input. The + * transmitter and the receiver must be enabled to use the loop function. + * + * Values: + * - 0 - Normal operation - LPUART_RX and LPUART_TX use separate pins. + * - 1 - Loop mode or single-wire mode where transmitter outputs are internally + * connected to receiver input (see RSRC bit). + */ +/*@{*/ +#define BP_LPUART_CTRL_LOOPS (7U) /*!< Bit position for LPUART_CTRL_LOOPS. */ +#define BM_LPUART_CTRL_LOOPS (0x00000080U) /*!< Bit mask for LPUART_CTRL_LOOPS. */ +#define BS_LPUART_CTRL_LOOPS (1U) /*!< Bit field size in bits for LPUART_CTRL_LOOPS. */ + +/*! @brief Read current value of the LPUART_CTRL_LOOPS field. */ +#define BR_LPUART_CTRL_LOOPS(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_LOOPS)) + +/*! @brief Format value for bitfield LPUART_CTRL_LOOPS. */ +#define BF_LPUART_CTRL_LOOPS(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_LOOPS) & BM_LPUART_CTRL_LOOPS) + +/*! @brief Set the LOOPS field to a new value. */ +#define BW_LPUART_CTRL_LOOPS(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_LOOPS) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field IDLECFG[10:8] (RW) + * + * Configures the number of idle characters that must be received before the + * IDLE flag is set. + * + * Values: + * - 000 - 1 idle character + * - 001 - 2 idle characters + * - 010 - 4 idle characters + * - 011 - 8 idle characters + * - 100 - 16 idle characters + * - 101 - 32 idle characters + * - 110 - 64 idle characters + * - 111 - 128 idle characters + */ +/*@{*/ +#define BP_LPUART_CTRL_IDLECFG (8U) /*!< Bit position for LPUART_CTRL_IDLECFG. */ +#define BM_LPUART_CTRL_IDLECFG (0x00000700U) /*!< Bit mask for LPUART_CTRL_IDLECFG. */ +#define BS_LPUART_CTRL_IDLECFG (3U) /*!< Bit field size in bits for LPUART_CTRL_IDLECFG. */ + +/*! @brief Read current value of the LPUART_CTRL_IDLECFG field. */ +#define BR_LPUART_CTRL_IDLECFG(x) (HW_LPUART_CTRL(x).B.IDLECFG) + +/*! @brief Format value for bitfield LPUART_CTRL_IDLECFG. */ +#define BF_LPUART_CTRL_IDLECFG(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_IDLECFG) & BM_LPUART_CTRL_IDLECFG) + +/*! @brief Set the IDLECFG field to a new value. */ +#define BW_LPUART_CTRL_IDLECFG(x, v) (HW_LPUART_CTRL_WR(x, (HW_LPUART_CTRL_RD(x) & ~BM_LPUART_CTRL_IDLECFG) | BF_LPUART_CTRL_IDLECFG(v))) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field MA2IE[14] (RW) + * + * Values: + * - 0 - MA2F interrupt disabled + * - 1 - MA2F interrupt enabled + */ +/*@{*/ +#define BP_LPUART_CTRL_MA2IE (14U) /*!< Bit position for LPUART_CTRL_MA2IE. */ +#define BM_LPUART_CTRL_MA2IE (0x00004000U) /*!< Bit mask for LPUART_CTRL_MA2IE. */ +#define BS_LPUART_CTRL_MA2IE (1U) /*!< Bit field size in bits for LPUART_CTRL_MA2IE. */ + +/*! @brief Read current value of the LPUART_CTRL_MA2IE field. */ +#define BR_LPUART_CTRL_MA2IE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_MA2IE)) + +/*! @brief Format value for bitfield LPUART_CTRL_MA2IE. */ +#define BF_LPUART_CTRL_MA2IE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_MA2IE) & BM_LPUART_CTRL_MA2IE) + +/*! @brief Set the MA2IE field to a new value. */ +#define BW_LPUART_CTRL_MA2IE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_MA2IE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field MA1IE[15] (RW) + * + * Values: + * - 0 - MA1F interrupt disabled + * - 1 - MA1F interrupt enabled + */ +/*@{*/ +#define BP_LPUART_CTRL_MA1IE (15U) /*!< Bit position for LPUART_CTRL_MA1IE. */ +#define BM_LPUART_CTRL_MA1IE (0x00008000U) /*!< Bit mask for LPUART_CTRL_MA1IE. */ +#define BS_LPUART_CTRL_MA1IE (1U) /*!< Bit field size in bits for LPUART_CTRL_MA1IE. */ + +/*! @brief Read current value of the LPUART_CTRL_MA1IE field. */ +#define BR_LPUART_CTRL_MA1IE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_MA1IE)) + +/*! @brief Format value for bitfield LPUART_CTRL_MA1IE. */ +#define BF_LPUART_CTRL_MA1IE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_MA1IE) & BM_LPUART_CTRL_MA1IE) + +/*! @brief Set the MA1IE field to a new value. */ +#define BW_LPUART_CTRL_MA1IE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_MA1IE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field SBK[16] (RW) + * + * Writing a 1 and then a 0 to SBK queues a break character in the transmit data + * stream. Additional break characters of 10 to 13, or 13 to 16 if + * LPUART_STATBRK13] is set, bit times of logic 0 are queued as long as SBK is set. Depending + * on the timing of the set and clear of SBK relative to the information + * currently being transmitted, a second break character may be queued before software + * clears SBK. + * + * Values: + * - 0 - Normal transmitter operation. + * - 1 - Queue break character(s) to be sent. + */ +/*@{*/ +#define BP_LPUART_CTRL_SBK (16U) /*!< Bit position for LPUART_CTRL_SBK. */ +#define BM_LPUART_CTRL_SBK (0x00010000U) /*!< Bit mask for LPUART_CTRL_SBK. */ +#define BS_LPUART_CTRL_SBK (1U) /*!< Bit field size in bits for LPUART_CTRL_SBK. */ + +/*! @brief Read current value of the LPUART_CTRL_SBK field. */ +#define BR_LPUART_CTRL_SBK(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_SBK)) + +/*! @brief Format value for bitfield LPUART_CTRL_SBK. */ +#define BF_LPUART_CTRL_SBK(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_SBK) & BM_LPUART_CTRL_SBK) + +/*! @brief Set the SBK field to a new value. */ +#define BW_LPUART_CTRL_SBK(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_SBK) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field RWU[17] (RW) + * + * This field can be set to place the LPUART receiver in a standby state. RWU + * automatically clears when an RWU event occurs, that is, an IDLE event when + * CTRL[WAKE] is clear or an address match when CTRL[WAKE] is set with STAT[RWUID] is + * clear. RWU must be set only with CTRL[WAKE] = 0 (wakeup on idle) if the + * channel is currently not idle. This can be determined by STAT[RAF]. If the flag is + * set to wake up an IDLE event and the channel is already idle, it is possible + * that the LPUART will discard data. This is because the data must be received or + * a LIN break detected after an IDLE is detected before IDLE is allowed to + * reasserted. + * + * Values: + * - 0 - Normal receiver operation. + * - 1 - LPUART receiver in standby waiting for wakeup condition. + */ +/*@{*/ +#define BP_LPUART_CTRL_RWU (17U) /*!< Bit position for LPUART_CTRL_RWU. */ +#define BM_LPUART_CTRL_RWU (0x00020000U) /*!< Bit mask for LPUART_CTRL_RWU. */ +#define BS_LPUART_CTRL_RWU (1U) /*!< Bit field size in bits for LPUART_CTRL_RWU. */ + +/*! @brief Read current value of the LPUART_CTRL_RWU field. */ +#define BR_LPUART_CTRL_RWU(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RWU)) + +/*! @brief Format value for bitfield LPUART_CTRL_RWU. */ +#define BF_LPUART_CTRL_RWU(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_RWU) & BM_LPUART_CTRL_RWU) + +/*! @brief Set the RWU field to a new value. */ +#define BW_LPUART_CTRL_RWU(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RWU) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field RE[18] (RW) + * + * Enables the LPUART receiver. When RE is written to 0, this register bit will + * read as 1 until the receiver finishes receiving the current character (if any). + * + * Values: + * - 0 - Receiver disabled. + * - 1 - Receiver enabled. + */ +/*@{*/ +#define BP_LPUART_CTRL_RE (18U) /*!< Bit position for LPUART_CTRL_RE. */ +#define BM_LPUART_CTRL_RE (0x00040000U) /*!< Bit mask for LPUART_CTRL_RE. */ +#define BS_LPUART_CTRL_RE (1U) /*!< Bit field size in bits for LPUART_CTRL_RE. */ + +/*! @brief Read current value of the LPUART_CTRL_RE field. */ +#define BR_LPUART_CTRL_RE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RE)) + +/*! @brief Format value for bitfield LPUART_CTRL_RE. */ +#define BF_LPUART_CTRL_RE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_RE) & BM_LPUART_CTRL_RE) + +/*! @brief Set the RE field to a new value. */ +#define BW_LPUART_CTRL_RE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field TE[19] (RW) + * + * Enables the LPUART transmitter. TE can also be used to queue an idle preamble + * by clearing and then setting TE. When TE is cleared, this register bit will + * read as 1 until the transmitter has completed the current character and the + * LPUART_TX pin is tristated. + * + * Values: + * - 0 - Transmitter disabled. + * - 1 - Transmitter enabled. + */ +/*@{*/ +#define BP_LPUART_CTRL_TE (19U) /*!< Bit position for LPUART_CTRL_TE. */ +#define BM_LPUART_CTRL_TE (0x00080000U) /*!< Bit mask for LPUART_CTRL_TE. */ +#define BS_LPUART_CTRL_TE (1U) /*!< Bit field size in bits for LPUART_CTRL_TE. */ + +/*! @brief Read current value of the LPUART_CTRL_TE field. */ +#define BR_LPUART_CTRL_TE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TE)) + +/*! @brief Format value for bitfield LPUART_CTRL_TE. */ +#define BF_LPUART_CTRL_TE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_TE) & BM_LPUART_CTRL_TE) + +/*! @brief Set the TE field to a new value. */ +#define BW_LPUART_CTRL_TE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field ILIE[20] (RW) + * + * ILIE enables the idle line flag, STAT[IDLE], to generate interrupt requests. + * + * Values: + * - 0 - Hardware interrupts from IDLE disabled; use polling. + * - 1 - Hardware interrupt requested when IDLE flag is 1. + */ +/*@{*/ +#define BP_LPUART_CTRL_ILIE (20U) /*!< Bit position for LPUART_CTRL_ILIE. */ +#define BM_LPUART_CTRL_ILIE (0x00100000U) /*!< Bit mask for LPUART_CTRL_ILIE. */ +#define BS_LPUART_CTRL_ILIE (1U) /*!< Bit field size in bits for LPUART_CTRL_ILIE. */ + +/*! @brief Read current value of the LPUART_CTRL_ILIE field. */ +#define BR_LPUART_CTRL_ILIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ILIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_ILIE. */ +#define BF_LPUART_CTRL_ILIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_ILIE) & BM_LPUART_CTRL_ILIE) + +/*! @brief Set the ILIE field to a new value. */ +#define BW_LPUART_CTRL_ILIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ILIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field RIE[21] (RW) + * + * Enables STAT[RDRF] to generate interrupt requests. + * + * Values: + * - 0 - Hardware interrupts from RDRF disabled; use polling. + * - 1 - Hardware interrupt requested when RDRF flag is 1. + */ +/*@{*/ +#define BP_LPUART_CTRL_RIE (21U) /*!< Bit position for LPUART_CTRL_RIE. */ +#define BM_LPUART_CTRL_RIE (0x00200000U) /*!< Bit mask for LPUART_CTRL_RIE. */ +#define BS_LPUART_CTRL_RIE (1U) /*!< Bit field size in bits for LPUART_CTRL_RIE. */ + +/*! @brief Read current value of the LPUART_CTRL_RIE field. */ +#define BR_LPUART_CTRL_RIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_RIE. */ +#define BF_LPUART_CTRL_RIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_RIE) & BM_LPUART_CTRL_RIE) + +/*! @brief Set the RIE field to a new value. */ +#define BW_LPUART_CTRL_RIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_RIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field TCIE[22] (RW) + * + * TCIE enables the transmission complete flag, TC, to generate interrupt + * requests. + * + * Values: + * - 0 - Hardware interrupts from TC disabled; use polling. + * - 1 - Hardware interrupt requested when TC flag is 1. + */ +/*@{*/ +#define BP_LPUART_CTRL_TCIE (22U) /*!< Bit position for LPUART_CTRL_TCIE. */ +#define BM_LPUART_CTRL_TCIE (0x00400000U) /*!< Bit mask for LPUART_CTRL_TCIE. */ +#define BS_LPUART_CTRL_TCIE (1U) /*!< Bit field size in bits for LPUART_CTRL_TCIE. */ + +/*! @brief Read current value of the LPUART_CTRL_TCIE field. */ +#define BR_LPUART_CTRL_TCIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TCIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_TCIE. */ +#define BF_LPUART_CTRL_TCIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_TCIE) & BM_LPUART_CTRL_TCIE) + +/*! @brief Set the TCIE field to a new value. */ +#define BW_LPUART_CTRL_TCIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TCIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field TIE[23] (RW) + * + * Enables STAT[TDRE] to generate interrupt requests. + * + * Values: + * - 0 - Hardware interrupts from TDRE disabled; use polling. + * - 1 - Hardware interrupt requested when TDRE flag is 1. + */ +/*@{*/ +#define BP_LPUART_CTRL_TIE (23U) /*!< Bit position for LPUART_CTRL_TIE. */ +#define BM_LPUART_CTRL_TIE (0x00800000U) /*!< Bit mask for LPUART_CTRL_TIE. */ +#define BS_LPUART_CTRL_TIE (1U) /*!< Bit field size in bits for LPUART_CTRL_TIE. */ + +/*! @brief Read current value of the LPUART_CTRL_TIE field. */ +#define BR_LPUART_CTRL_TIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_TIE. */ +#define BF_LPUART_CTRL_TIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_TIE) & BM_LPUART_CTRL_TIE) + +/*! @brief Set the TIE field to a new value. */ +#define BW_LPUART_CTRL_TIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field PEIE[24] (RW) + * + * This bit enables the parity error flag (PF) to generate hardware interrupt + * requests. + * + * Values: + * - 0 - PF interrupts disabled; use polling). + * - 1 - Hardware interrupt requested when PF is set. + */ +/*@{*/ +#define BP_LPUART_CTRL_PEIE (24U) /*!< Bit position for LPUART_CTRL_PEIE. */ +#define BM_LPUART_CTRL_PEIE (0x01000000U) /*!< Bit mask for LPUART_CTRL_PEIE. */ +#define BS_LPUART_CTRL_PEIE (1U) /*!< Bit field size in bits for LPUART_CTRL_PEIE. */ + +/*! @brief Read current value of the LPUART_CTRL_PEIE field. */ +#define BR_LPUART_CTRL_PEIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PEIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_PEIE. */ +#define BF_LPUART_CTRL_PEIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_PEIE) & BM_LPUART_CTRL_PEIE) + +/*! @brief Set the PEIE field to a new value. */ +#define BW_LPUART_CTRL_PEIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_PEIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field FEIE[25] (RW) + * + * This bit enables the framing error flag (FE) to generate hardware interrupt + * requests. + * + * Values: + * - 0 - FE interrupts disabled; use polling. + * - 1 - Hardware interrupt requested when FE is set. + */ +/*@{*/ +#define BP_LPUART_CTRL_FEIE (25U) /*!< Bit position for LPUART_CTRL_FEIE. */ +#define BM_LPUART_CTRL_FEIE (0x02000000U) /*!< Bit mask for LPUART_CTRL_FEIE. */ +#define BS_LPUART_CTRL_FEIE (1U) /*!< Bit field size in bits for LPUART_CTRL_FEIE. */ + +/*! @brief Read current value of the LPUART_CTRL_FEIE field. */ +#define BR_LPUART_CTRL_FEIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_FEIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_FEIE. */ +#define BF_LPUART_CTRL_FEIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_FEIE) & BM_LPUART_CTRL_FEIE) + +/*! @brief Set the FEIE field to a new value. */ +#define BW_LPUART_CTRL_FEIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_FEIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field NEIE[26] (RW) + * + * This bit enables the noise flag (NF) to generate hardware interrupt requests. + * + * Values: + * - 0 - NF interrupts disabled; use polling. + * - 1 - Hardware interrupt requested when NF is set. + */ +/*@{*/ +#define BP_LPUART_CTRL_NEIE (26U) /*!< Bit position for LPUART_CTRL_NEIE. */ +#define BM_LPUART_CTRL_NEIE (0x04000000U) /*!< Bit mask for LPUART_CTRL_NEIE. */ +#define BS_LPUART_CTRL_NEIE (1U) /*!< Bit field size in bits for LPUART_CTRL_NEIE. */ + +/*! @brief Read current value of the LPUART_CTRL_NEIE field. */ +#define BR_LPUART_CTRL_NEIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_NEIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_NEIE. */ +#define BF_LPUART_CTRL_NEIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_NEIE) & BM_LPUART_CTRL_NEIE) + +/*! @brief Set the NEIE field to a new value. */ +#define BW_LPUART_CTRL_NEIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_NEIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field ORIE[27] (RW) + * + * This bit enables the overrun flag (OR) to generate hardware interrupt + * requests. + * + * Values: + * - 0 - OR interrupts disabled; use polling. + * - 1 - Hardware interrupt requested when OR is set. + */ +/*@{*/ +#define BP_LPUART_CTRL_ORIE (27U) /*!< Bit position for LPUART_CTRL_ORIE. */ +#define BM_LPUART_CTRL_ORIE (0x08000000U) /*!< Bit mask for LPUART_CTRL_ORIE. */ +#define BS_LPUART_CTRL_ORIE (1U) /*!< Bit field size in bits for LPUART_CTRL_ORIE. */ + +/*! @brief Read current value of the LPUART_CTRL_ORIE field. */ +#define BR_LPUART_CTRL_ORIE(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ORIE)) + +/*! @brief Format value for bitfield LPUART_CTRL_ORIE. */ +#define BF_LPUART_CTRL_ORIE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_ORIE) & BM_LPUART_CTRL_ORIE) + +/*! @brief Set the ORIE field to a new value. */ +#define BW_LPUART_CTRL_ORIE(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_ORIE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field TXINV[28] (RW) + * + * Setting this bit reverses the polarity of the transmitted data output. + * Setting TXINV inverts the LPUART_TX output for all cases: data bits, start and stop + * bits, break, and idle. + * + * Values: + * - 0 - Transmit data not inverted. + * - 1 - Transmit data inverted. + */ +/*@{*/ +#define BP_LPUART_CTRL_TXINV (28U) /*!< Bit position for LPUART_CTRL_TXINV. */ +#define BM_LPUART_CTRL_TXINV (0x10000000U) /*!< Bit mask for LPUART_CTRL_TXINV. */ +#define BS_LPUART_CTRL_TXINV (1U) /*!< Bit field size in bits for LPUART_CTRL_TXINV. */ + +/*! @brief Read current value of the LPUART_CTRL_TXINV field. */ +#define BR_LPUART_CTRL_TXINV(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TXINV)) + +/*! @brief Format value for bitfield LPUART_CTRL_TXINV. */ +#define BF_LPUART_CTRL_TXINV(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_TXINV) & BM_LPUART_CTRL_TXINV) + +/*! @brief Set the TXINV field to a new value. */ +#define BW_LPUART_CTRL_TXINV(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TXINV) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field TXDIR[29] (RW) + * + * When the LPUART is configured for single-wire half-duplex operation (LOOPS = + * RSRC = 1), this bit determines the direction of data at the LPUART_TX pin. + * When clearing TXDIR, the transmitter will finish receiving the current character + * (if any) before the receiver starts receiving data from the LPUART_TX pin. + * + * Values: + * - 0 - LPUART_TX pin is an input in single-wire mode. + * - 1 - LPUART_TX pin is an output in single-wire mode. + */ +/*@{*/ +#define BP_LPUART_CTRL_TXDIR (29U) /*!< Bit position for LPUART_CTRL_TXDIR. */ +#define BM_LPUART_CTRL_TXDIR (0x20000000U) /*!< Bit mask for LPUART_CTRL_TXDIR. */ +#define BS_LPUART_CTRL_TXDIR (1U) /*!< Bit field size in bits for LPUART_CTRL_TXDIR. */ + +/*! @brief Read current value of the LPUART_CTRL_TXDIR field. */ +#define BR_LPUART_CTRL_TXDIR(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TXDIR)) + +/*! @brief Format value for bitfield LPUART_CTRL_TXDIR. */ +#define BF_LPUART_CTRL_TXDIR(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_TXDIR) & BM_LPUART_CTRL_TXDIR) + +/*! @brief Set the TXDIR field to a new value. */ +#define BW_LPUART_CTRL_TXDIR(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_TXDIR) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field R9T8[30] (RW) + * + * R9 is the tenth data bit received when the LPUART is configured for 10-bit + * data formats. When reading 10-bit data, read R9 before reading LPUART_DATA T8 is + * the ninth data bit received when the LPUART is configured for 9-bit or 10-bit + * data formats. When writing 9-bit or 10-bit data, write T8 before writing + * LPUART_DATA. If T8 does not need to change from its previous value, such as when + * it is used to generate address mark or parity, they it need not be written each + * time LPUART_DATA is written. + */ +/*@{*/ +#define BP_LPUART_CTRL_R9T8 (30U) /*!< Bit position for LPUART_CTRL_R9T8. */ +#define BM_LPUART_CTRL_R9T8 (0x40000000U) /*!< Bit mask for LPUART_CTRL_R9T8. */ +#define BS_LPUART_CTRL_R9T8 (1U) /*!< Bit field size in bits for LPUART_CTRL_R9T8. */ + +/*! @brief Read current value of the LPUART_CTRL_R9T8 field. */ +#define BR_LPUART_CTRL_R9T8(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_R9T8)) + +/*! @brief Format value for bitfield LPUART_CTRL_R9T8. */ +#define BF_LPUART_CTRL_R9T8(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_R9T8) & BM_LPUART_CTRL_R9T8) + +/*! @brief Set the R9T8 field to a new value. */ +#define BW_LPUART_CTRL_R9T8(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_R9T8) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_CTRL, field R8T9[31] (RW) + * + * R8 is the ninth data bit received when the LPUART is configured for 9-bit or + * 10-bit data formats. When reading 9-bit or 10-bit data, read R8 before reading + * LPUART_DATA. T9 is the tenth data bit received when the LPUART is configured + * for 10-bit data formats. When writing 10-bit data, write T9 before writing + * LPUART_DATA. If T9 does not need to change from its previous value, such as when + * it is used to generate address mark or parity, they it need not be written + * each time LPUART_DATA is written. + */ +/*@{*/ +#define BP_LPUART_CTRL_R8T9 (31U) /*!< Bit position for LPUART_CTRL_R8T9. */ +#define BM_LPUART_CTRL_R8T9 (0x80000000U) /*!< Bit mask for LPUART_CTRL_R8T9. */ +#define BS_LPUART_CTRL_R8T9 (1U) /*!< Bit field size in bits for LPUART_CTRL_R8T9. */ + +/*! @brief Read current value of the LPUART_CTRL_R8T9 field. */ +#define BR_LPUART_CTRL_R8T9(x) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_R8T9)) + +/*! @brief Format value for bitfield LPUART_CTRL_R8T9. */ +#define BF_LPUART_CTRL_R8T9(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_CTRL_R8T9) & BM_LPUART_CTRL_R8T9) + +/*! @brief Set the R8T9 field to a new value. */ +#define BW_LPUART_CTRL_R8T9(x, v) (BITBAND_ACCESS32(HW_LPUART_CTRL_ADDR(x), BP_LPUART_CTRL_R8T9) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_LPUART_DATA - LPUART Data Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_DATA - LPUART Data Register (RW) + * + * Reset value: 0x00001000U + * + * This register is actually two separate registers. Reads return the contents + * of the read-only receive data buffer and writes go to the write-only transmit + * data buffer. Reads and writes of this register are also involved in the + * automatic flag clearing mechanisms for some of the LPUART status flags. + */ +typedef union _hw_lpuart_data +{ + uint32_t U; + struct _hw_lpuart_data_bitfields + { + uint32_t R0T0 : 1; /*!< [0] */ + uint32_t R1T1 : 1; /*!< [1] */ + uint32_t R2T2 : 1; /*!< [2] */ + uint32_t R3T3 : 1; /*!< [3] */ + uint32_t R4T4 : 1; /*!< [4] */ + uint32_t R5T5 : 1; /*!< [5] */ + uint32_t R6T6 : 1; /*!< [6] */ + uint32_t R7T7 : 1; /*!< [7] */ + uint32_t R8T8 : 1; /*!< [8] */ + uint32_t R9T9 : 1; /*!< [9] */ + uint32_t RESERVED0 : 1; /*!< [10] */ + uint32_t IDLINE : 1; /*!< [11] Idle Line */ + uint32_t RXEMPT : 1; /*!< [12] Receive Buffer Empty */ + uint32_t FRETSC : 1; /*!< [13] Frame Error / Transmit Special + * Character */ + uint32_t PARITYE : 1; /*!< [14] */ + uint32_t NOISY : 1; /*!< [15] */ + uint32_t RESERVED1 : 16; /*!< [31:16] */ + } B; +} hw_lpuart_data_t; + +/*! + * @name Constants and macros for entire LPUART_DATA register + */ +/*@{*/ +#define HW_LPUART_DATA_ADDR(x) ((x) + 0xCU) + +#define HW_LPUART_DATA(x) (*(__IO hw_lpuart_data_t *) HW_LPUART_DATA_ADDR(x)) +#define HW_LPUART_DATA_RD(x) (HW_LPUART_DATA(x).U) +#define HW_LPUART_DATA_WR(x, v) (HW_LPUART_DATA(x).U = (v)) +#define HW_LPUART_DATA_SET(x, v) (HW_LPUART_DATA_WR(x, HW_LPUART_DATA_RD(x) | (v))) +#define HW_LPUART_DATA_CLR(x, v) (HW_LPUART_DATA_WR(x, HW_LPUART_DATA_RD(x) & ~(v))) +#define HW_LPUART_DATA_TOG(x, v) (HW_LPUART_DATA_WR(x, HW_LPUART_DATA_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_DATA bitfields + */ + +/*! + * @name Register LPUART_DATA, field R0T0[0] (RW) + * + * Read receive data buffer 0 or write transmit data buffer 0. + */ +/*@{*/ +#define BP_LPUART_DATA_R0T0 (0U) /*!< Bit position for LPUART_DATA_R0T0. */ +#define BM_LPUART_DATA_R0T0 (0x00000001U) /*!< Bit mask for LPUART_DATA_R0T0. */ +#define BS_LPUART_DATA_R0T0 (1U) /*!< Bit field size in bits for LPUART_DATA_R0T0. */ + +/*! @brief Read current value of the LPUART_DATA_R0T0 field. */ +#define BR_LPUART_DATA_R0T0(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R0T0)) + +/*! @brief Format value for bitfield LPUART_DATA_R0T0. */ +#define BF_LPUART_DATA_R0T0(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R0T0) & BM_LPUART_DATA_R0T0) + +/*! @brief Set the R0T0 field to a new value. */ +#define BW_LPUART_DATA_R0T0(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R0T0) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R1T1[1] (RW) + * + * Read receive data buffer 1 or write transmit data buffer 1. + */ +/*@{*/ +#define BP_LPUART_DATA_R1T1 (1U) /*!< Bit position for LPUART_DATA_R1T1. */ +#define BM_LPUART_DATA_R1T1 (0x00000002U) /*!< Bit mask for LPUART_DATA_R1T1. */ +#define BS_LPUART_DATA_R1T1 (1U) /*!< Bit field size in bits for LPUART_DATA_R1T1. */ + +/*! @brief Read current value of the LPUART_DATA_R1T1 field. */ +#define BR_LPUART_DATA_R1T1(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R1T1)) + +/*! @brief Format value for bitfield LPUART_DATA_R1T1. */ +#define BF_LPUART_DATA_R1T1(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R1T1) & BM_LPUART_DATA_R1T1) + +/*! @brief Set the R1T1 field to a new value. */ +#define BW_LPUART_DATA_R1T1(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R1T1) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R2T2[2] (RW) + * + * Read receive data buffer 2 or write transmit data buffer 2. + */ +/*@{*/ +#define BP_LPUART_DATA_R2T2 (2U) /*!< Bit position for LPUART_DATA_R2T2. */ +#define BM_LPUART_DATA_R2T2 (0x00000004U) /*!< Bit mask for LPUART_DATA_R2T2. */ +#define BS_LPUART_DATA_R2T2 (1U) /*!< Bit field size in bits for LPUART_DATA_R2T2. */ + +/*! @brief Read current value of the LPUART_DATA_R2T2 field. */ +#define BR_LPUART_DATA_R2T2(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R2T2)) + +/*! @brief Format value for bitfield LPUART_DATA_R2T2. */ +#define BF_LPUART_DATA_R2T2(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R2T2) & BM_LPUART_DATA_R2T2) + +/*! @brief Set the R2T2 field to a new value. */ +#define BW_LPUART_DATA_R2T2(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R2T2) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R3T3[3] (RW) + * + * Read receive data buffer 3 or write transmit data buffer 3. + */ +/*@{*/ +#define BP_LPUART_DATA_R3T3 (3U) /*!< Bit position for LPUART_DATA_R3T3. */ +#define BM_LPUART_DATA_R3T3 (0x00000008U) /*!< Bit mask for LPUART_DATA_R3T3. */ +#define BS_LPUART_DATA_R3T3 (1U) /*!< Bit field size in bits for LPUART_DATA_R3T3. */ + +/*! @brief Read current value of the LPUART_DATA_R3T3 field. */ +#define BR_LPUART_DATA_R3T3(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R3T3)) + +/*! @brief Format value for bitfield LPUART_DATA_R3T3. */ +#define BF_LPUART_DATA_R3T3(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R3T3) & BM_LPUART_DATA_R3T3) + +/*! @brief Set the R3T3 field to a new value. */ +#define BW_LPUART_DATA_R3T3(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R3T3) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R4T4[4] (RW) + * + * Read receive data buffer 4 or write transmit data buffer 4. + */ +/*@{*/ +#define BP_LPUART_DATA_R4T4 (4U) /*!< Bit position for LPUART_DATA_R4T4. */ +#define BM_LPUART_DATA_R4T4 (0x00000010U) /*!< Bit mask for LPUART_DATA_R4T4. */ +#define BS_LPUART_DATA_R4T4 (1U) /*!< Bit field size in bits for LPUART_DATA_R4T4. */ + +/*! @brief Read current value of the LPUART_DATA_R4T4 field. */ +#define BR_LPUART_DATA_R4T4(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R4T4)) + +/*! @brief Format value for bitfield LPUART_DATA_R4T4. */ +#define BF_LPUART_DATA_R4T4(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R4T4) & BM_LPUART_DATA_R4T4) + +/*! @brief Set the R4T4 field to a new value. */ +#define BW_LPUART_DATA_R4T4(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R4T4) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R5T5[5] (RW) + * + * Read receive data buffer 5 or write transmit data buffer 5. + */ +/*@{*/ +#define BP_LPUART_DATA_R5T5 (5U) /*!< Bit position for LPUART_DATA_R5T5. */ +#define BM_LPUART_DATA_R5T5 (0x00000020U) /*!< Bit mask for LPUART_DATA_R5T5. */ +#define BS_LPUART_DATA_R5T5 (1U) /*!< Bit field size in bits for LPUART_DATA_R5T5. */ + +/*! @brief Read current value of the LPUART_DATA_R5T5 field. */ +#define BR_LPUART_DATA_R5T5(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R5T5)) + +/*! @brief Format value for bitfield LPUART_DATA_R5T5. */ +#define BF_LPUART_DATA_R5T5(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R5T5) & BM_LPUART_DATA_R5T5) + +/*! @brief Set the R5T5 field to a new value. */ +#define BW_LPUART_DATA_R5T5(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R5T5) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R6T6[6] (RW) + * + * Read receive data buffer 6 or write transmit data buffer 6. + */ +/*@{*/ +#define BP_LPUART_DATA_R6T6 (6U) /*!< Bit position for LPUART_DATA_R6T6. */ +#define BM_LPUART_DATA_R6T6 (0x00000040U) /*!< Bit mask for LPUART_DATA_R6T6. */ +#define BS_LPUART_DATA_R6T6 (1U) /*!< Bit field size in bits for LPUART_DATA_R6T6. */ + +/*! @brief Read current value of the LPUART_DATA_R6T6 field. */ +#define BR_LPUART_DATA_R6T6(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R6T6)) + +/*! @brief Format value for bitfield LPUART_DATA_R6T6. */ +#define BF_LPUART_DATA_R6T6(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R6T6) & BM_LPUART_DATA_R6T6) + +/*! @brief Set the R6T6 field to a new value. */ +#define BW_LPUART_DATA_R6T6(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R6T6) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R7T7[7] (RW) + * + * Read receive data buffer 7 or write transmit data buffer 7. + */ +/*@{*/ +#define BP_LPUART_DATA_R7T7 (7U) /*!< Bit position for LPUART_DATA_R7T7. */ +#define BM_LPUART_DATA_R7T7 (0x00000080U) /*!< Bit mask for LPUART_DATA_R7T7. */ +#define BS_LPUART_DATA_R7T7 (1U) /*!< Bit field size in bits for LPUART_DATA_R7T7. */ + +/*! @brief Read current value of the LPUART_DATA_R7T7 field. */ +#define BR_LPUART_DATA_R7T7(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R7T7)) + +/*! @brief Format value for bitfield LPUART_DATA_R7T7. */ +#define BF_LPUART_DATA_R7T7(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R7T7) & BM_LPUART_DATA_R7T7) + +/*! @brief Set the R7T7 field to a new value. */ +#define BW_LPUART_DATA_R7T7(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R7T7) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R8T8[8] (RW) + * + * Read receive data buffer 8 or write transmit data buffer 8. + */ +/*@{*/ +#define BP_LPUART_DATA_R8T8 (8U) /*!< Bit position for LPUART_DATA_R8T8. */ +#define BM_LPUART_DATA_R8T8 (0x00000100U) /*!< Bit mask for LPUART_DATA_R8T8. */ +#define BS_LPUART_DATA_R8T8 (1U) /*!< Bit field size in bits for LPUART_DATA_R8T8. */ + +/*! @brief Read current value of the LPUART_DATA_R8T8 field. */ +#define BR_LPUART_DATA_R8T8(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R8T8)) + +/*! @brief Format value for bitfield LPUART_DATA_R8T8. */ +#define BF_LPUART_DATA_R8T8(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R8T8) & BM_LPUART_DATA_R8T8) + +/*! @brief Set the R8T8 field to a new value. */ +#define BW_LPUART_DATA_R8T8(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R8T8) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field R9T9[9] (RW) + * + * Read receive data buffer 9 or write transmit data buffer 9. + */ +/*@{*/ +#define BP_LPUART_DATA_R9T9 (9U) /*!< Bit position for LPUART_DATA_R9T9. */ +#define BM_LPUART_DATA_R9T9 (0x00000200U) /*!< Bit mask for LPUART_DATA_R9T9. */ +#define BS_LPUART_DATA_R9T9 (1U) /*!< Bit field size in bits for LPUART_DATA_R9T9. */ + +/*! @brief Read current value of the LPUART_DATA_R9T9 field. */ +#define BR_LPUART_DATA_R9T9(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R9T9)) + +/*! @brief Format value for bitfield LPUART_DATA_R9T9. */ +#define BF_LPUART_DATA_R9T9(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_R9T9) & BM_LPUART_DATA_R9T9) + +/*! @brief Set the R9T9 field to a new value. */ +#define BW_LPUART_DATA_R9T9(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_R9T9) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field IDLINE[11] (RO) + * + * Indicates the receiver line was idle before receiving the character in + * DATA[9:0]. Unlike the IDLE flag, this bit can set for the first character received + * when the receiver is first enabled. + * + * Values: + * - 0 - Receiver was not idle before receiving this character. + * - 1 - Receiver was idle before receiving this character. + */ +/*@{*/ +#define BP_LPUART_DATA_IDLINE (11U) /*!< Bit position for LPUART_DATA_IDLINE. */ +#define BM_LPUART_DATA_IDLINE (0x00000800U) /*!< Bit mask for LPUART_DATA_IDLINE. */ +#define BS_LPUART_DATA_IDLINE (1U) /*!< Bit field size in bits for LPUART_DATA_IDLINE. */ + +/*! @brief Read current value of the LPUART_DATA_IDLINE field. */ +#define BR_LPUART_DATA_IDLINE(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_IDLINE)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field RXEMPT[12] (RO) + * + * Asserts when there is no data in the receive buffer. This field does not take + * into account data that is in the receive shift register. + * + * Values: + * - 0 - Receive buffer contains valid data. + * - 1 - Receive buffer is empty, data returned on read is not valid. + */ +/*@{*/ +#define BP_LPUART_DATA_RXEMPT (12U) /*!< Bit position for LPUART_DATA_RXEMPT. */ +#define BM_LPUART_DATA_RXEMPT (0x00001000U) /*!< Bit mask for LPUART_DATA_RXEMPT. */ +#define BS_LPUART_DATA_RXEMPT (1U) /*!< Bit field size in bits for LPUART_DATA_RXEMPT. */ + +/*! @brief Read current value of the LPUART_DATA_RXEMPT field. */ +#define BR_LPUART_DATA_RXEMPT(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_RXEMPT)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field FRETSC[13] (RW) + * + * For reads, indicates the current received dataword contained in DATA[R9:R0] + * was received with a frame error. For writes, indicates a break or idle + * character is to be transmitted instead of the contents in DATA[T9:T0]. T9 is used to + * indicate a break character when 0 and a idle character when 1, he contents of + * DATA[T8:T0] should be zero. + * + * Values: + * - 0 - The dataword was received without a frame error on read, transmit a + * normal character on write. + * - 1 - The dataword was received with a frame error, transmit an idle or break + * character on transmit. + */ +/*@{*/ +#define BP_LPUART_DATA_FRETSC (13U) /*!< Bit position for LPUART_DATA_FRETSC. */ +#define BM_LPUART_DATA_FRETSC (0x00002000U) /*!< Bit mask for LPUART_DATA_FRETSC. */ +#define BS_LPUART_DATA_FRETSC (1U) /*!< Bit field size in bits for LPUART_DATA_FRETSC. */ + +/*! @brief Read current value of the LPUART_DATA_FRETSC field. */ +#define BR_LPUART_DATA_FRETSC(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_FRETSC)) + +/*! @brief Format value for bitfield LPUART_DATA_FRETSC. */ +#define BF_LPUART_DATA_FRETSC(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_DATA_FRETSC) & BM_LPUART_DATA_FRETSC) + +/*! @brief Set the FRETSC field to a new value. */ +#define BW_LPUART_DATA_FRETSC(x, v) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_FRETSC) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field PARITYE[14] (RO) + * + * The current received dataword contained in DATA[R9:R0] was received with a + * parity error. + * + * Values: + * - 0 - The dataword was received without a parity error. + * - 1 - The dataword was received with a parity error. + */ +/*@{*/ +#define BP_LPUART_DATA_PARITYE (14U) /*!< Bit position for LPUART_DATA_PARITYE. */ +#define BM_LPUART_DATA_PARITYE (0x00004000U) /*!< Bit mask for LPUART_DATA_PARITYE. */ +#define BS_LPUART_DATA_PARITYE (1U) /*!< Bit field size in bits for LPUART_DATA_PARITYE. */ + +/*! @brief Read current value of the LPUART_DATA_PARITYE field. */ +#define BR_LPUART_DATA_PARITYE(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_PARITYE)) +/*@}*/ + +/*! + * @name Register LPUART_DATA, field NOISY[15] (RO) + * + * The current received dataword contained in DATA[R9:R0] was received with + * noise. + * + * Values: + * - 0 - The dataword was received without noise. + * - 1 - The data was received with noise. + */ +/*@{*/ +#define BP_LPUART_DATA_NOISY (15U) /*!< Bit position for LPUART_DATA_NOISY. */ +#define BM_LPUART_DATA_NOISY (0x00008000U) /*!< Bit mask for LPUART_DATA_NOISY. */ +#define BS_LPUART_DATA_NOISY (1U) /*!< Bit field size in bits for LPUART_DATA_NOISY. */ + +/*! @brief Read current value of the LPUART_DATA_NOISY field. */ +#define BR_LPUART_DATA_NOISY(x) (BITBAND_ACCESS32(HW_LPUART_DATA_ADDR(x), BP_LPUART_DATA_NOISY)) +/*@}*/ + +/******************************************************************************* + * HW_LPUART_MATCH - LPUART Match Address Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_MATCH - LPUART Match Address Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_lpuart_match +{ + uint32_t U; + struct _hw_lpuart_match_bitfields + { + uint32_t MA1 : 10; /*!< [9:0] Match Address 1 */ + uint32_t RESERVED0 : 6; /*!< [15:10] */ + uint32_t MA2 : 10; /*!< [25:16] Match Address 2 */ + uint32_t RESERVED1 : 6; /*!< [31:26] */ + } B; +} hw_lpuart_match_t; + +/*! + * @name Constants and macros for entire LPUART_MATCH register + */ +/*@{*/ +#define HW_LPUART_MATCH_ADDR(x) ((x) + 0x10U) + +#define HW_LPUART_MATCH(x) (*(__IO hw_lpuart_match_t *) HW_LPUART_MATCH_ADDR(x)) +#define HW_LPUART_MATCH_RD(x) (HW_LPUART_MATCH(x).U) +#define HW_LPUART_MATCH_WR(x, v) (HW_LPUART_MATCH(x).U = (v)) +#define HW_LPUART_MATCH_SET(x, v) (HW_LPUART_MATCH_WR(x, HW_LPUART_MATCH_RD(x) | (v))) +#define HW_LPUART_MATCH_CLR(x, v) (HW_LPUART_MATCH_WR(x, HW_LPUART_MATCH_RD(x) & ~(v))) +#define HW_LPUART_MATCH_TOG(x, v) (HW_LPUART_MATCH_WR(x, HW_LPUART_MATCH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_MATCH bitfields + */ + +/*! + * @name Register LPUART_MATCH, field MA1[9:0] (RW) + * + * The MA1 and MA2 registers are compared to input data addresses when the most + * significant bit is set and the associated BAUD[MAEN] bit is set. If a match + * occurs, the following data is transferred to the data register. If a match + * fails, the following data is discarded. Software should only write a MA register + * when the associated BAUD[MAEN] bit is clear. + */ +/*@{*/ +#define BP_LPUART_MATCH_MA1 (0U) /*!< Bit position for LPUART_MATCH_MA1. */ +#define BM_LPUART_MATCH_MA1 (0x000003FFU) /*!< Bit mask for LPUART_MATCH_MA1. */ +#define BS_LPUART_MATCH_MA1 (10U) /*!< Bit field size in bits for LPUART_MATCH_MA1. */ + +/*! @brief Read current value of the LPUART_MATCH_MA1 field. */ +#define BR_LPUART_MATCH_MA1(x) (HW_LPUART_MATCH(x).B.MA1) + +/*! @brief Format value for bitfield LPUART_MATCH_MA1. */ +#define BF_LPUART_MATCH_MA1(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MATCH_MA1) & BM_LPUART_MATCH_MA1) + +/*! @brief Set the MA1 field to a new value. */ +#define BW_LPUART_MATCH_MA1(x, v) (HW_LPUART_MATCH_WR(x, (HW_LPUART_MATCH_RD(x) & ~BM_LPUART_MATCH_MA1) | BF_LPUART_MATCH_MA1(v))) +/*@}*/ + +/*! + * @name Register LPUART_MATCH, field MA2[25:16] (RW) + * + * The MA1 and MA2 registers are compared to input data addresses when the most + * significant bit is set and the associated BAUD[MAEN] bit is set. If a match + * occurs, the following data is transferred to the data register. If a match + * fails, the following data is discarded. Software should only write a MA register + * when the associated BAUD[MAEN] bit is clear. + */ +/*@{*/ +#define BP_LPUART_MATCH_MA2 (16U) /*!< Bit position for LPUART_MATCH_MA2. */ +#define BM_LPUART_MATCH_MA2 (0x03FF0000U) /*!< Bit mask for LPUART_MATCH_MA2. */ +#define BS_LPUART_MATCH_MA2 (10U) /*!< Bit field size in bits for LPUART_MATCH_MA2. */ + +/*! @brief Read current value of the LPUART_MATCH_MA2 field. */ +#define BR_LPUART_MATCH_MA2(x) (HW_LPUART_MATCH(x).B.MA2) + +/*! @brief Format value for bitfield LPUART_MATCH_MA2. */ +#define BF_LPUART_MATCH_MA2(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MATCH_MA2) & BM_LPUART_MATCH_MA2) + +/*! @brief Set the MA2 field to a new value. */ +#define BW_LPUART_MATCH_MA2(x, v) (HW_LPUART_MATCH_WR(x, (HW_LPUART_MATCH_RD(x) & ~BM_LPUART_MATCH_MA2) | BF_LPUART_MATCH_MA2(v))) +/*@}*/ + +/******************************************************************************* + * HW_LPUART_MODIR - LPUART Modem IrDA Register + ******************************************************************************/ + +/*! + * @brief HW_LPUART_MODIR - LPUART Modem IrDA Register (RW) + * + * Reset value: 0x00000000U + * + * The MODEM register controls options for setting the modem configuration. + */ +typedef union _hw_lpuart_modir +{ + uint32_t U; + struct _hw_lpuart_modir_bitfields + { + uint32_t TXCTSE : 1; /*!< [0] Transmitter clear-to-send enable */ + uint32_t TXRTSE : 1; /*!< [1] Transmitter request-to-send enable */ + uint32_t TXRTSPOL : 1; /*!< [2] Transmitter request-to-send polarity + * */ + uint32_t RXRTSE : 1; /*!< [3] Receiver request-to-send enable */ + uint32_t TXCTSC : 1; /*!< [4] Transmit CTS Configuration */ + uint32_t TXCTSSRC : 1; /*!< [5] Transmit CTS Source */ + uint32_t RESERVED0 : 10; /*!< [15:6] */ + uint32_t TNP : 2; /*!< [17:16] Transmitter narrow pulse */ + uint32_t IREN : 1; /*!< [18] Infrared enable */ + uint32_t RESERVED1 : 13; /*!< [31:19] */ + } B; +} hw_lpuart_modir_t; + +/*! + * @name Constants and macros for entire LPUART_MODIR register + */ +/*@{*/ +#define HW_LPUART_MODIR_ADDR(x) ((x) + 0x14U) + +#define HW_LPUART_MODIR(x) (*(__IO hw_lpuart_modir_t *) HW_LPUART_MODIR_ADDR(x)) +#define HW_LPUART_MODIR_RD(x) (HW_LPUART_MODIR(x).U) +#define HW_LPUART_MODIR_WR(x, v) (HW_LPUART_MODIR(x).U = (v)) +#define HW_LPUART_MODIR_SET(x, v) (HW_LPUART_MODIR_WR(x, HW_LPUART_MODIR_RD(x) | (v))) +#define HW_LPUART_MODIR_CLR(x, v) (HW_LPUART_MODIR_WR(x, HW_LPUART_MODIR_RD(x) & ~(v))) +#define HW_LPUART_MODIR_TOG(x, v) (HW_LPUART_MODIR_WR(x, HW_LPUART_MODIR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual LPUART_MODIR bitfields + */ + +/*! + * @name Register LPUART_MODIR, field TXCTSE[0] (RW) + * + * TXCTSE controls the operation of the transmitter. TXCTSE can be set + * independently from the state of TXRTSE and RXRTSE. + * + * Values: + * - 0 - CTS has no effect on the transmitter. + * - 1 - Enables clear-to-send operation. The transmitter checks the state of + * CTS each time it is ready to send a character. If CTS is asserted, the + * character is sent. If CTS is deasserted, the signal TXD remains in the mark + * state and transmission is delayed until CTS is asserted. Changes in CTS as a + * character is being sent do not affect its transmission. + */ +/*@{*/ +#define BP_LPUART_MODIR_TXCTSE (0U) /*!< Bit position for LPUART_MODIR_TXCTSE. */ +#define BM_LPUART_MODIR_TXCTSE (0x00000001U) /*!< Bit mask for LPUART_MODIR_TXCTSE. */ +#define BS_LPUART_MODIR_TXCTSE (1U) /*!< Bit field size in bits for LPUART_MODIR_TXCTSE. */ + +/*! @brief Read current value of the LPUART_MODIR_TXCTSE field. */ +#define BR_LPUART_MODIR_TXCTSE(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSE)) + +/*! @brief Format value for bitfield LPUART_MODIR_TXCTSE. */ +#define BF_LPUART_MODIR_TXCTSE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TXCTSE) & BM_LPUART_MODIR_TXCTSE) + +/*! @brief Set the TXCTSE field to a new value. */ +#define BW_LPUART_MODIR_TXCTSE(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field TXRTSE[1] (RW) + * + * Controls RTS before and after a transmission. + * + * Values: + * - 0 - The transmitter has no effect on RTS. + * - 1 - When a character is placed into an empty transmitter data buffer , RTS + * asserts one bit time before the start bit is transmitted. RTS deasserts + * one bit time after all characters in the transmitter data buffer and shift + * register are completely sent, including the last stop bit. + */ +/*@{*/ +#define BP_LPUART_MODIR_TXRTSE (1U) /*!< Bit position for LPUART_MODIR_TXRTSE. */ +#define BM_LPUART_MODIR_TXRTSE (0x00000002U) /*!< Bit mask for LPUART_MODIR_TXRTSE. */ +#define BS_LPUART_MODIR_TXRTSE (1U) /*!< Bit field size in bits for LPUART_MODIR_TXRTSE. */ + +/*! @brief Read current value of the LPUART_MODIR_TXRTSE field. */ +#define BR_LPUART_MODIR_TXRTSE(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXRTSE)) + +/*! @brief Format value for bitfield LPUART_MODIR_TXRTSE. */ +#define BF_LPUART_MODIR_TXRTSE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TXRTSE) & BM_LPUART_MODIR_TXRTSE) + +/*! @brief Set the TXRTSE field to a new value. */ +#define BW_LPUART_MODIR_TXRTSE(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXRTSE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field TXRTSPOL[2] (RW) + * + * Controls the polarity of the transmitter RTS. TXRTSPOL does not affect the + * polarity of the receiver RTS. RTS will remain negated in the active low state + * unless TXRTSE is set. + * + * Values: + * - 0 - Transmitter RTS is active low. + * - 1 - Transmitter RTS is active high. + */ +/*@{*/ +#define BP_LPUART_MODIR_TXRTSPOL (2U) /*!< Bit position for LPUART_MODIR_TXRTSPOL. */ +#define BM_LPUART_MODIR_TXRTSPOL (0x00000004U) /*!< Bit mask for LPUART_MODIR_TXRTSPOL. */ +#define BS_LPUART_MODIR_TXRTSPOL (1U) /*!< Bit field size in bits for LPUART_MODIR_TXRTSPOL. */ + +/*! @brief Read current value of the LPUART_MODIR_TXRTSPOL field. */ +#define BR_LPUART_MODIR_TXRTSPOL(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXRTSPOL)) + +/*! @brief Format value for bitfield LPUART_MODIR_TXRTSPOL. */ +#define BF_LPUART_MODIR_TXRTSPOL(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TXRTSPOL) & BM_LPUART_MODIR_TXRTSPOL) + +/*! @brief Set the TXRTSPOL field to a new value. */ +#define BW_LPUART_MODIR_TXRTSPOL(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXRTSPOL) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field RXRTSE[3] (RW) + * + * Allows the RTS output to control the CTS input of the transmitting device to + * prevent receiver overrun. Do not set both RXRTSE and TXRTSE. + * + * Values: + * - 0 - The receiver has no effect on RTS. + * - 1 - RTS is deasserted if the receiver data register is full or a start bit + * has been detected that would cause the receiver data register to become + * full. RTS is asserted if the receiver data register is not full and has not + * detected a start bit that would cause the receiver data register to become + * full. + */ +/*@{*/ +#define BP_LPUART_MODIR_RXRTSE (3U) /*!< Bit position for LPUART_MODIR_RXRTSE. */ +#define BM_LPUART_MODIR_RXRTSE (0x00000008U) /*!< Bit mask for LPUART_MODIR_RXRTSE. */ +#define BS_LPUART_MODIR_RXRTSE (1U) /*!< Bit field size in bits for LPUART_MODIR_RXRTSE. */ + +/*! @brief Read current value of the LPUART_MODIR_RXRTSE field. */ +#define BR_LPUART_MODIR_RXRTSE(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_RXRTSE)) + +/*! @brief Format value for bitfield LPUART_MODIR_RXRTSE. */ +#define BF_LPUART_MODIR_RXRTSE(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_RXRTSE) & BM_LPUART_MODIR_RXRTSE) + +/*! @brief Set the RXRTSE field to a new value. */ +#define BW_LPUART_MODIR_RXRTSE(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_RXRTSE) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field TXCTSC[4] (RW) + * + * Configures if the CTS state is checked at the start of each character or only + * when the transmitter is idle. + * + * Values: + * - 0 - CTS input is sampled at the start of each character. + * - 1 - CTS input is sampled when the transmitter is idle. + */ +/*@{*/ +#define BP_LPUART_MODIR_TXCTSC (4U) /*!< Bit position for LPUART_MODIR_TXCTSC. */ +#define BM_LPUART_MODIR_TXCTSC (0x00000010U) /*!< Bit mask for LPUART_MODIR_TXCTSC. */ +#define BS_LPUART_MODIR_TXCTSC (1U) /*!< Bit field size in bits for LPUART_MODIR_TXCTSC. */ + +/*! @brief Read current value of the LPUART_MODIR_TXCTSC field. */ +#define BR_LPUART_MODIR_TXCTSC(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSC)) + +/*! @brief Format value for bitfield LPUART_MODIR_TXCTSC. */ +#define BF_LPUART_MODIR_TXCTSC(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TXCTSC) & BM_LPUART_MODIR_TXCTSC) + +/*! @brief Set the TXCTSC field to a new value. */ +#define BW_LPUART_MODIR_TXCTSC(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSC) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field TXCTSSRC[5] (RW) + * + * Configures the source of the CTS input. + * + * Values: + * - 0 - CTS input is the LPUART_CTS pin. + * - 1 - CTS input is the inverted Receiver Match result. + */ +/*@{*/ +#define BP_LPUART_MODIR_TXCTSSRC (5U) /*!< Bit position for LPUART_MODIR_TXCTSSRC. */ +#define BM_LPUART_MODIR_TXCTSSRC (0x00000020U) /*!< Bit mask for LPUART_MODIR_TXCTSSRC. */ +#define BS_LPUART_MODIR_TXCTSSRC (1U) /*!< Bit field size in bits for LPUART_MODIR_TXCTSSRC. */ + +/*! @brief Read current value of the LPUART_MODIR_TXCTSSRC field. */ +#define BR_LPUART_MODIR_TXCTSSRC(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSSRC)) + +/*! @brief Format value for bitfield LPUART_MODIR_TXCTSSRC. */ +#define BF_LPUART_MODIR_TXCTSSRC(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TXCTSSRC) & BM_LPUART_MODIR_TXCTSSRC) + +/*! @brief Set the TXCTSSRC field to a new value. */ +#define BW_LPUART_MODIR_TXCTSSRC(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_TXCTSSRC) = (v)) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field TNP[17:16] (RW) + * + * Enables whether the LPUART transmits a 1/OSR, 2/OSR, 3/OSR or 4/OSR narrow + * pulse. + * + * Values: + * - 00 - 1/OSR. + * - 01 - 2/OSR. + * - 10 - 3/OSR. + * - 11 - 4/OSR. + */ +/*@{*/ +#define BP_LPUART_MODIR_TNP (16U) /*!< Bit position for LPUART_MODIR_TNP. */ +#define BM_LPUART_MODIR_TNP (0x00030000U) /*!< Bit mask for LPUART_MODIR_TNP. */ +#define BS_LPUART_MODIR_TNP (2U) /*!< Bit field size in bits for LPUART_MODIR_TNP. */ + +/*! @brief Read current value of the LPUART_MODIR_TNP field. */ +#define BR_LPUART_MODIR_TNP(x) (HW_LPUART_MODIR(x).B.TNP) + +/*! @brief Format value for bitfield LPUART_MODIR_TNP. */ +#define BF_LPUART_MODIR_TNP(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_TNP) & BM_LPUART_MODIR_TNP) + +/*! @brief Set the TNP field to a new value. */ +#define BW_LPUART_MODIR_TNP(x, v) (HW_LPUART_MODIR_WR(x, (HW_LPUART_MODIR_RD(x) & ~BM_LPUART_MODIR_TNP) | BF_LPUART_MODIR_TNP(v))) +/*@}*/ + +/*! + * @name Register LPUART_MODIR, field IREN[18] (RW) + * + * Enables/disables the infrared modulation/demodulation. + * + * Values: + * - 0 - IR disabled. + * - 1 - IR enabled. + */ +/*@{*/ +#define BP_LPUART_MODIR_IREN (18U) /*!< Bit position for LPUART_MODIR_IREN. */ +#define BM_LPUART_MODIR_IREN (0x00040000U) /*!< Bit mask for LPUART_MODIR_IREN. */ +#define BS_LPUART_MODIR_IREN (1U) /*!< Bit field size in bits for LPUART_MODIR_IREN. */ + +/*! @brief Read current value of the LPUART_MODIR_IREN field. */ +#define BR_LPUART_MODIR_IREN(x) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_IREN)) + +/*! @brief Format value for bitfield LPUART_MODIR_IREN. */ +#define BF_LPUART_MODIR_IREN(v) ((uint32_t)((uint32_t)(v) << BP_LPUART_MODIR_IREN) & BM_LPUART_MODIR_IREN) + +/*! @brief Set the IREN field to a new value. */ +#define BW_LPUART_MODIR_IREN(x, v) (BITBAND_ACCESS32(HW_LPUART_MODIR_ADDR(x), BP_LPUART_MODIR_IREN) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_lpuart_t - module struct + ******************************************************************************/ +/*! + * @brief All LPUART module registers. + */ +#pragma pack(1) +typedef struct _hw_lpuart +{ + __IO hw_lpuart_baud_t BAUD; /*!< [0x0] LPUART Baud Rate Register */ + __IO hw_lpuart_stat_t STAT; /*!< [0x4] LPUART Status Register */ + __IO hw_lpuart_ctrl_t CTRL; /*!< [0x8] LPUART Control Register */ + __IO hw_lpuart_data_t DATA; /*!< [0xC] LPUART Data Register */ + __IO hw_lpuart_match_t MATCH; /*!< [0x10] LPUART Match Address Register */ + __IO hw_lpuart_modir_t MODIR; /*!< [0x14] LPUART Modem IrDA Register */ +} hw_lpuart_t; +#pragma pack() + +/*! @brief Macro to access all LPUART registers. */ +/*! @param x LPUART module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_LPUART(LPUART0_BASE)</code>. */ +#define HW_LPUART(x) (*(hw_lpuart_t *)(x)) + +#endif /* __HW_LPUART_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcg.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcg.h new file mode 100644 index 0000000000..a2a04fc80b --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcg.h @@ -0,0 +1,1779 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_MCG_REGISTERS_H__ +#define __HW_MCG_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 MCG + * + * Multipurpose Clock Generator module + * + * Registers defined in this header file: + * - HW_MCG_C1 - MCG Control 1 Register + * - HW_MCG_C2 - MCG Control 2 Register + * - HW_MCG_C3 - MCG Control 3 Register + * - HW_MCG_C4 - MCG Control 4 Register + * - HW_MCG_C5 - MCG Control 5 Register + * - HW_MCG_C6 - MCG Control 6 Register + * - HW_MCG_S - MCG Status Register + * - HW_MCG_SC - MCG Status and Control Register + * - HW_MCG_ATCVH - MCG Auto Trim Compare Value High Register + * - HW_MCG_ATCVL - MCG Auto Trim Compare Value Low Register + * - HW_MCG_C7 - MCG Control 7 Register + * - HW_MCG_C8 - MCG Control 8 Register + * + * - hw_mcg_t - Struct containing all module registers. + */ + +#define HW_MCG_INSTANCE_COUNT (1U) /*!< Number of instances of the MCG module. */ + +/******************************************************************************* + * HW_MCG_C1 - MCG Control 1 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C1 - MCG Control 1 Register (RW) + * + * Reset value: 0x04U + */ +typedef union _hw_mcg_c1 +{ + uint8_t U; + struct _hw_mcg_c1_bitfields + { + uint8_t IREFSTEN : 1; /*!< [0] Internal Reference Stop Enable */ + uint8_t IRCLKEN : 1; /*!< [1] Internal Reference Clock Enable */ + uint8_t IREFS : 1; /*!< [2] Internal Reference Select */ + uint8_t FRDIV : 3; /*!< [5:3] FLL External Reference Divider */ + uint8_t CLKS : 2; /*!< [7:6] Clock Source Select */ + } B; +} hw_mcg_c1_t; + +/*! + * @name Constants and macros for entire MCG_C1 register + */ +/*@{*/ +#define HW_MCG_C1_ADDR(x) ((x) + 0x0U) + +#define HW_MCG_C1(x) (*(__IO hw_mcg_c1_t *) HW_MCG_C1_ADDR(x)) +#define HW_MCG_C1_RD(x) (HW_MCG_C1(x).U) +#define HW_MCG_C1_WR(x, v) (HW_MCG_C1(x).U = (v)) +#define HW_MCG_C1_SET(x, v) (HW_MCG_C1_WR(x, HW_MCG_C1_RD(x) | (v))) +#define HW_MCG_C1_CLR(x, v) (HW_MCG_C1_WR(x, HW_MCG_C1_RD(x) & ~(v))) +#define HW_MCG_C1_TOG(x, v) (HW_MCG_C1_WR(x, HW_MCG_C1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C1 bitfields + */ + +/*! + * @name Register MCG_C1, field IREFSTEN[0] (RW) + * + * Controls whether or not the internal reference clock remains enabled when the + * MCG enters Stop mode. + * + * Values: + * - 0 - Internal reference clock is disabled in Stop mode. + * - 1 - Internal reference clock is enabled in Stop mode if IRCLKEN is set or + * if MCG is in FEI, FBI, or BLPI modes before entering Stop mode. + */ +/*@{*/ +#define BP_MCG_C1_IREFSTEN (0U) /*!< Bit position for MCG_C1_IREFSTEN. */ +#define BM_MCG_C1_IREFSTEN (0x01U) /*!< Bit mask for MCG_C1_IREFSTEN. */ +#define BS_MCG_C1_IREFSTEN (1U) /*!< Bit field size in bits for MCG_C1_IREFSTEN. */ + +/*! @brief Read current value of the MCG_C1_IREFSTEN field. */ +#define BR_MCG_C1_IREFSTEN(x) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IREFSTEN)) + +/*! @brief Format value for bitfield MCG_C1_IREFSTEN. */ +#define BF_MCG_C1_IREFSTEN(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C1_IREFSTEN) & BM_MCG_C1_IREFSTEN) + +/*! @brief Set the IREFSTEN field to a new value. */ +#define BW_MCG_C1_IREFSTEN(x, v) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IREFSTEN) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C1, field IRCLKEN[1] (RW) + * + * Enables the internal reference clock for use as MCGIRCLK. + * + * Values: + * - 0 - MCGIRCLK inactive. + * - 1 - MCGIRCLK active. + */ +/*@{*/ +#define BP_MCG_C1_IRCLKEN (1U) /*!< Bit position for MCG_C1_IRCLKEN. */ +#define BM_MCG_C1_IRCLKEN (0x02U) /*!< Bit mask for MCG_C1_IRCLKEN. */ +#define BS_MCG_C1_IRCLKEN (1U) /*!< Bit field size in bits for MCG_C1_IRCLKEN. */ + +/*! @brief Read current value of the MCG_C1_IRCLKEN field. */ +#define BR_MCG_C1_IRCLKEN(x) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IRCLKEN)) + +/*! @brief Format value for bitfield MCG_C1_IRCLKEN. */ +#define BF_MCG_C1_IRCLKEN(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C1_IRCLKEN) & BM_MCG_C1_IRCLKEN) + +/*! @brief Set the IRCLKEN field to a new value. */ +#define BW_MCG_C1_IRCLKEN(x, v) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IRCLKEN) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C1, field IREFS[2] (RW) + * + * Selects the reference clock source for the FLL. + * + * Values: + * - 0 - External reference clock is selected. + * - 1 - The slow internal reference clock is selected. + */ +/*@{*/ +#define BP_MCG_C1_IREFS (2U) /*!< Bit position for MCG_C1_IREFS. */ +#define BM_MCG_C1_IREFS (0x04U) /*!< Bit mask for MCG_C1_IREFS. */ +#define BS_MCG_C1_IREFS (1U) /*!< Bit field size in bits for MCG_C1_IREFS. */ + +/*! @brief Read current value of the MCG_C1_IREFS field. */ +#define BR_MCG_C1_IREFS(x) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IREFS)) + +/*! @brief Format value for bitfield MCG_C1_IREFS. */ +#define BF_MCG_C1_IREFS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C1_IREFS) & BM_MCG_C1_IREFS) + +/*! @brief Set the IREFS field to a new value. */ +#define BW_MCG_C1_IREFS(x, v) (BITBAND_ACCESS8(HW_MCG_C1_ADDR(x), BP_MCG_C1_IREFS) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C1, field FRDIV[5:3] (RW) + * + * Selects the amount to divide down the external reference clock for the FLL. + * The resulting frequency must be in the range 31.25 kHz to 39.0625 kHz (This is + * required when FLL/DCO is the clock source for MCGOUTCLK . In FBE mode, it is + * not required to meet this range, but it is recommended in the cases when trying + * to enter a FLL mode from FBE). + * + * Values: + * - 000 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 1; for all other RANGE + * values, Divide Factor is 32. + * - 001 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 2; for all other RANGE + * values, Divide Factor is 64. + * - 010 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 4; for all other RANGE + * values, Divide Factor is 128. + * - 011 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 8; for all other RANGE + * values, Divide Factor is 256. + * - 100 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 16; for all other RANGE + * values, Divide Factor is 512. + * - 101 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 32; for all other RANGE + * values, Divide Factor is 1024. + * - 110 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 64; for all other RANGE + * values, Divide Factor is 1280 . + * - 111 - If RANGE = 0 or OSCSEL=1 , Divide Factor is 128; for all other RANGE + * values, Divide Factor is 1536 . + */ +/*@{*/ +#define BP_MCG_C1_FRDIV (3U) /*!< Bit position for MCG_C1_FRDIV. */ +#define BM_MCG_C1_FRDIV (0x38U) /*!< Bit mask for MCG_C1_FRDIV. */ +#define BS_MCG_C1_FRDIV (3U) /*!< Bit field size in bits for MCG_C1_FRDIV. */ + +/*! @brief Read current value of the MCG_C1_FRDIV field. */ +#define BR_MCG_C1_FRDIV(x) (HW_MCG_C1(x).B.FRDIV) + +/*! @brief Format value for bitfield MCG_C1_FRDIV. */ +#define BF_MCG_C1_FRDIV(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C1_FRDIV) & BM_MCG_C1_FRDIV) + +/*! @brief Set the FRDIV field to a new value. */ +#define BW_MCG_C1_FRDIV(x, v) (HW_MCG_C1_WR(x, (HW_MCG_C1_RD(x) & ~BM_MCG_C1_FRDIV) | BF_MCG_C1_FRDIV(v))) +/*@}*/ + +/*! + * @name Register MCG_C1, field CLKS[7:6] (RW) + * + * Selects the clock source for MCGOUTCLK . + * + * Values: + * - 00 - Encoding 0 - Output of FLL or PLL is selected (depends on PLLS control + * bit). + * - 01 - Encoding 1 - Internal reference clock is selected. + * - 10 - Encoding 2 - External reference clock is selected. + * - 11 - Encoding 3 - Reserved. + */ +/*@{*/ +#define BP_MCG_C1_CLKS (6U) /*!< Bit position for MCG_C1_CLKS. */ +#define BM_MCG_C1_CLKS (0xC0U) /*!< Bit mask for MCG_C1_CLKS. */ +#define BS_MCG_C1_CLKS (2U) /*!< Bit field size in bits for MCG_C1_CLKS. */ + +/*! @brief Read current value of the MCG_C1_CLKS field. */ +#define BR_MCG_C1_CLKS(x) (HW_MCG_C1(x).B.CLKS) + +/*! @brief Format value for bitfield MCG_C1_CLKS. */ +#define BF_MCG_C1_CLKS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C1_CLKS) & BM_MCG_C1_CLKS) + +/*! @brief Set the CLKS field to a new value. */ +#define BW_MCG_C1_CLKS(x, v) (HW_MCG_C1_WR(x, (HW_MCG_C1_RD(x) & ~BM_MCG_C1_CLKS) | BF_MCG_C1_CLKS(v))) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C2 - MCG Control 2 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C2 - MCG Control 2 Register (RW) + * + * Reset value: 0x80U + */ +typedef union _hw_mcg_c2 +{ + uint8_t U; + struct _hw_mcg_c2_bitfields + { + uint8_t IRCS : 1; /*!< [0] Internal Reference Clock Select */ + uint8_t LP : 1; /*!< [1] Low Power Select */ + uint8_t EREFS : 1; /*!< [2] External Reference Select */ + uint8_t HGO : 1; /*!< [3] High Gain Oscillator Select */ + uint8_t RANGE : 2; /*!< [5:4] Frequency Range Select */ + uint8_t FCFTRIM : 1; /*!< [6] Fast Internal Reference Clock Fine Trim + * */ + uint8_t LOCRE0 : 1; /*!< [7] Loss of Clock Reset Enable */ + } B; +} hw_mcg_c2_t; + +/*! + * @name Constants and macros for entire MCG_C2 register + */ +/*@{*/ +#define HW_MCG_C2_ADDR(x) ((x) + 0x1U) + +#define HW_MCG_C2(x) (*(__IO hw_mcg_c2_t *) HW_MCG_C2_ADDR(x)) +#define HW_MCG_C2_RD(x) (HW_MCG_C2(x).U) +#define HW_MCG_C2_WR(x, v) (HW_MCG_C2(x).U = (v)) +#define HW_MCG_C2_SET(x, v) (HW_MCG_C2_WR(x, HW_MCG_C2_RD(x) | (v))) +#define HW_MCG_C2_CLR(x, v) (HW_MCG_C2_WR(x, HW_MCG_C2_RD(x) & ~(v))) +#define HW_MCG_C2_TOG(x, v) (HW_MCG_C2_WR(x, HW_MCG_C2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C2 bitfields + */ + +/*! + * @name Register MCG_C2, field IRCS[0] (RW) + * + * Selects between the fast or slow internal reference clock source. + * + * Values: + * - 0 - Slow internal reference clock selected. + * - 1 - Fast internal reference clock selected. + */ +/*@{*/ +#define BP_MCG_C2_IRCS (0U) /*!< Bit position for MCG_C2_IRCS. */ +#define BM_MCG_C2_IRCS (0x01U) /*!< Bit mask for MCG_C2_IRCS. */ +#define BS_MCG_C2_IRCS (1U) /*!< Bit field size in bits for MCG_C2_IRCS. */ + +/*! @brief Read current value of the MCG_C2_IRCS field. */ +#define BR_MCG_C2_IRCS(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_IRCS)) + +/*! @brief Format value for bitfield MCG_C2_IRCS. */ +#define BF_MCG_C2_IRCS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_IRCS) & BM_MCG_C2_IRCS) + +/*! @brief Set the IRCS field to a new value. */ +#define BW_MCG_C2_IRCS(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_IRCS) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C2, field LP[1] (RW) + * + * Controls whether the FLL or PLL is disabled in BLPI and BLPE modes. In FBE or + * PBE modes, setting this bit to 1 will transition the MCG into BLPE mode; in + * FBI mode, setting this bit to 1 will transition the MCG into BLPI mode. In any + * other MCG mode, LP bit has no affect. + * + * Values: + * - 0 - FLL or PLL is not disabled in bypass modes. + * - 1 - FLL or PLL is disabled in bypass modes (lower power) + */ +/*@{*/ +#define BP_MCG_C2_LP (1U) /*!< Bit position for MCG_C2_LP. */ +#define BM_MCG_C2_LP (0x02U) /*!< Bit mask for MCG_C2_LP. */ +#define BS_MCG_C2_LP (1U) /*!< Bit field size in bits for MCG_C2_LP. */ + +/*! @brief Read current value of the MCG_C2_LP field. */ +#define BR_MCG_C2_LP(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_LP)) + +/*! @brief Format value for bitfield MCG_C2_LP. */ +#define BF_MCG_C2_LP(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_LP) & BM_MCG_C2_LP) + +/*! @brief Set the LP field to a new value. */ +#define BW_MCG_C2_LP(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_LP) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C2, field EREFS[2] (RW) + * + * Selects the source for the external reference clock. See the Oscillator (OSC) + * chapter for more details. + * + * Values: + * - 0 - External reference clock requested. + * - 1 - Oscillator requested. + */ +/*@{*/ +#define BP_MCG_C2_EREFS (2U) /*!< Bit position for MCG_C2_EREFS. */ +#define BM_MCG_C2_EREFS (0x04U) /*!< Bit mask for MCG_C2_EREFS. */ +#define BS_MCG_C2_EREFS (1U) /*!< Bit field size in bits for MCG_C2_EREFS. */ + +/*! @brief Read current value of the MCG_C2_EREFS field. */ +#define BR_MCG_C2_EREFS(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_EREFS)) + +/*! @brief Format value for bitfield MCG_C2_EREFS. */ +#define BF_MCG_C2_EREFS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_EREFS) & BM_MCG_C2_EREFS) + +/*! @brief Set the EREFS field to a new value. */ +#define BW_MCG_C2_EREFS(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_EREFS) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C2, field HGO[3] (RW) + * + * Controls the crystal oscillator mode of operation. See the Oscillator (OSC) + * chapter for more details. + * + * Values: + * - 0 - Configure crystal oscillator for low-power operation. + * - 1 - Configure crystal oscillator for high-gain operation. + */ +/*@{*/ +#define BP_MCG_C2_HGO (3U) /*!< Bit position for MCG_C2_HGO. */ +#define BM_MCG_C2_HGO (0x08U) /*!< Bit mask for MCG_C2_HGO. */ +#define BS_MCG_C2_HGO (1U) /*!< Bit field size in bits for MCG_C2_HGO. */ + +/*! @brief Read current value of the MCG_C2_HGO field. */ +#define BR_MCG_C2_HGO(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_HGO)) + +/*! @brief Format value for bitfield MCG_C2_HGO. */ +#define BF_MCG_C2_HGO(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_HGO) & BM_MCG_C2_HGO) + +/*! @brief Set the HGO field to a new value. */ +#define BW_MCG_C2_HGO(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_HGO) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C2, field RANGE[5:4] (RW) + * + * Selects the frequency range for the crystal oscillator or external clock + * source. See the Oscillator (OSC) chapter for more details and the device data + * sheet for the frequency ranges used. + * + * Values: + * - 00 - Encoding 0 - Low frequency range selected for the crystal oscillator . + * - 01 - Encoding 1 - High frequency range selected for the crystal oscillator . + */ +/*@{*/ +#define BP_MCG_C2_RANGE (4U) /*!< Bit position for MCG_C2_RANGE. */ +#define BM_MCG_C2_RANGE (0x30U) /*!< Bit mask for MCG_C2_RANGE. */ +#define BS_MCG_C2_RANGE (2U) /*!< Bit field size in bits for MCG_C2_RANGE. */ + +/*! @brief Read current value of the MCG_C2_RANGE field. */ +#define BR_MCG_C2_RANGE(x) (HW_MCG_C2(x).B.RANGE) + +/*! @brief Format value for bitfield MCG_C2_RANGE. */ +#define BF_MCG_C2_RANGE(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_RANGE) & BM_MCG_C2_RANGE) + +/*! @brief Set the RANGE field to a new value. */ +#define BW_MCG_C2_RANGE(x, v) (HW_MCG_C2_WR(x, (HW_MCG_C2_RD(x) & ~BM_MCG_C2_RANGE) | BF_MCG_C2_RANGE(v))) +/*@}*/ + +/*! + * @name Register MCG_C2, field FCFTRIM[6] (RW) + * + * FCFTRIM controls the smallest adjustment of the fast internal reference clock + * frequency. Setting FCFTRIM increases the period and clearing FCFTRIM + * decreases the period by the smallest amount possible. If an FCFTRIM value stored in + * nonvolatile memory is to be used, it is your responsibility to copy that value + * from the nonvolatile memory location to this bit. + */ +/*@{*/ +#define BP_MCG_C2_FCFTRIM (6U) /*!< Bit position for MCG_C2_FCFTRIM. */ +#define BM_MCG_C2_FCFTRIM (0x40U) /*!< Bit mask for MCG_C2_FCFTRIM. */ +#define BS_MCG_C2_FCFTRIM (1U) /*!< Bit field size in bits for MCG_C2_FCFTRIM. */ + +/*! @brief Read current value of the MCG_C2_FCFTRIM field. */ +#define BR_MCG_C2_FCFTRIM(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_FCFTRIM)) + +/*! @brief Format value for bitfield MCG_C2_FCFTRIM. */ +#define BF_MCG_C2_FCFTRIM(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_FCFTRIM) & BM_MCG_C2_FCFTRIM) + +/*! @brief Set the FCFTRIM field to a new value. */ +#define BW_MCG_C2_FCFTRIM(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_FCFTRIM) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C2, field LOCRE0[7] (RW) + * + * Determines whether an interrupt or a reset request is made following a loss + * of OSC0 external reference clock. The LOCRE0 only has an affect when CME0 is + * set. + * + * Values: + * - 0 - Interrupt request is generated on a loss of OSC0 external reference + * clock. + * - 1 - Generate a reset request on a loss of OSC0 external reference clock. + */ +/*@{*/ +#define BP_MCG_C2_LOCRE0 (7U) /*!< Bit position for MCG_C2_LOCRE0. */ +#define BM_MCG_C2_LOCRE0 (0x80U) /*!< Bit mask for MCG_C2_LOCRE0. */ +#define BS_MCG_C2_LOCRE0 (1U) /*!< Bit field size in bits for MCG_C2_LOCRE0. */ + +/*! @brief Read current value of the MCG_C2_LOCRE0 field. */ +#define BR_MCG_C2_LOCRE0(x) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_LOCRE0)) + +/*! @brief Format value for bitfield MCG_C2_LOCRE0. */ +#define BF_MCG_C2_LOCRE0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C2_LOCRE0) & BM_MCG_C2_LOCRE0) + +/*! @brief Set the LOCRE0 field to a new value. */ +#define BW_MCG_C2_LOCRE0(x, v) (BITBAND_ACCESS8(HW_MCG_C2_ADDR(x), BP_MCG_C2_LOCRE0) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C3 - MCG Control 3 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C3 - MCG Control 3 Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_c3 +{ + uint8_t U; + struct _hw_mcg_c3_bitfields + { + uint8_t SCTRIM : 8; /*!< [7:0] Slow Internal Reference Clock Trim + * Setting */ + } B; +} hw_mcg_c3_t; + +/*! + * @name Constants and macros for entire MCG_C3 register + */ +/*@{*/ +#define HW_MCG_C3_ADDR(x) ((x) + 0x2U) + +#define HW_MCG_C3(x) (*(__IO hw_mcg_c3_t *) HW_MCG_C3_ADDR(x)) +#define HW_MCG_C3_RD(x) (HW_MCG_C3(x).U) +#define HW_MCG_C3_WR(x, v) (HW_MCG_C3(x).U = (v)) +#define HW_MCG_C3_SET(x, v) (HW_MCG_C3_WR(x, HW_MCG_C3_RD(x) | (v))) +#define HW_MCG_C3_CLR(x, v) (HW_MCG_C3_WR(x, HW_MCG_C3_RD(x) & ~(v))) +#define HW_MCG_C3_TOG(x, v) (HW_MCG_C3_WR(x, HW_MCG_C3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C3 bitfields + */ + +/*! + * @name Register MCG_C3, field SCTRIM[7:0] (RW) + * + * SCTRIM A value for SCTRIM is loaded during reset from a factory programmed + * location. controls the slow internal reference clock frequency by controlling + * the slow internal reference clock period. The SCTRIM bits are binary weighted, + * that is, bit 1 adjusts twice as much as bit 0. Increasing the binary value + * increases the period, and decreasing the value decreases the period. An additional + * fine trim bit is available in C4 register as the SCFTRIM bit. Upon reset, + * this value is loaded with a factory trim value. If an SCTRIM value stored in + * nonvolatile memory is to be used, it is your responsibility to copy that value + * from the nonvolatile memory location to this register. + */ +/*@{*/ +#define BP_MCG_C3_SCTRIM (0U) /*!< Bit position for MCG_C3_SCTRIM. */ +#define BM_MCG_C3_SCTRIM (0xFFU) /*!< Bit mask for MCG_C3_SCTRIM. */ +#define BS_MCG_C3_SCTRIM (8U) /*!< Bit field size in bits for MCG_C3_SCTRIM. */ + +/*! @brief Read current value of the MCG_C3_SCTRIM field. */ +#define BR_MCG_C3_SCTRIM(x) (HW_MCG_C3(x).U) + +/*! @brief Format value for bitfield MCG_C3_SCTRIM. */ +#define BF_MCG_C3_SCTRIM(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C3_SCTRIM) & BM_MCG_C3_SCTRIM) + +/*! @brief Set the SCTRIM field to a new value. */ +#define BW_MCG_C3_SCTRIM(x, v) (HW_MCG_C3_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C4 - MCG Control 4 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C4 - MCG Control 4 Register (RW) + * + * Reset value: 0x00U + * + * Reset values for DRST and DMX32 bits are 0. + */ +typedef union _hw_mcg_c4 +{ + uint8_t U; + struct _hw_mcg_c4_bitfields + { + uint8_t SCFTRIM : 1; /*!< [0] Slow Internal Reference Clock Fine Trim + * */ + uint8_t FCTRIM : 4; /*!< [4:1] Fast Internal Reference Clock Trim + * Setting */ + uint8_t DRST_DRS : 2; /*!< [6:5] DCO Range Select */ + uint8_t DMX32 : 1; /*!< [7] DCO Maximum Frequency with 32.768 kHz + * Reference */ + } B; +} hw_mcg_c4_t; + +/*! + * @name Constants and macros for entire MCG_C4 register + */ +/*@{*/ +#define HW_MCG_C4_ADDR(x) ((x) + 0x3U) + +#define HW_MCG_C4(x) (*(__IO hw_mcg_c4_t *) HW_MCG_C4_ADDR(x)) +#define HW_MCG_C4_RD(x) (HW_MCG_C4(x).U) +#define HW_MCG_C4_WR(x, v) (HW_MCG_C4(x).U = (v)) +#define HW_MCG_C4_SET(x, v) (HW_MCG_C4_WR(x, HW_MCG_C4_RD(x) | (v))) +#define HW_MCG_C4_CLR(x, v) (HW_MCG_C4_WR(x, HW_MCG_C4_RD(x) & ~(v))) +#define HW_MCG_C4_TOG(x, v) (HW_MCG_C4_WR(x, HW_MCG_C4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C4 bitfields + */ + +/*! + * @name Register MCG_C4, field SCFTRIM[0] (RW) + * + * SCFTRIM A value for SCFTRIM is loaded during reset from a factory programmed + * location . controls the smallest adjustment of the slow internal reference + * clock frequency. Setting SCFTRIM increases the period and clearing SCFTRIM + * decreases the period by the smallest amount possible. If an SCFTRIM value stored in + * nonvolatile memory is to be used, it is your responsibility to copy that value + * from the nonvolatile memory location to this bit. + */ +/*@{*/ +#define BP_MCG_C4_SCFTRIM (0U) /*!< Bit position for MCG_C4_SCFTRIM. */ +#define BM_MCG_C4_SCFTRIM (0x01U) /*!< Bit mask for MCG_C4_SCFTRIM. */ +#define BS_MCG_C4_SCFTRIM (1U) /*!< Bit field size in bits for MCG_C4_SCFTRIM. */ + +/*! @brief Read current value of the MCG_C4_SCFTRIM field. */ +#define BR_MCG_C4_SCFTRIM(x) (BITBAND_ACCESS8(HW_MCG_C4_ADDR(x), BP_MCG_C4_SCFTRIM)) + +/*! @brief Format value for bitfield MCG_C4_SCFTRIM. */ +#define BF_MCG_C4_SCFTRIM(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C4_SCFTRIM) & BM_MCG_C4_SCFTRIM) + +/*! @brief Set the SCFTRIM field to a new value. */ +#define BW_MCG_C4_SCFTRIM(x, v) (BITBAND_ACCESS8(HW_MCG_C4_ADDR(x), BP_MCG_C4_SCFTRIM) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C4, field FCTRIM[4:1] (RW) + * + * FCTRIM A value for FCTRIM is loaded during reset from a factory programmed + * location. controls the fast internal reference clock frequency by controlling + * the fast internal reference clock period. The FCTRIM bits are binary weighted, + * that is, bit 1 adjusts twice as much as bit 0. Increasing the binary value + * increases the period, and decreasing the value decreases the period. If an + * FCTRIM[3:0] value stored in nonvolatile memory is to be used, it is your + * responsibility to copy that value from the nonvolatile memory location to this register. + */ +/*@{*/ +#define BP_MCG_C4_FCTRIM (1U) /*!< Bit position for MCG_C4_FCTRIM. */ +#define BM_MCG_C4_FCTRIM (0x1EU) /*!< Bit mask for MCG_C4_FCTRIM. */ +#define BS_MCG_C4_FCTRIM (4U) /*!< Bit field size in bits for MCG_C4_FCTRIM. */ + +/*! @brief Read current value of the MCG_C4_FCTRIM field. */ +#define BR_MCG_C4_FCTRIM(x) (HW_MCG_C4(x).B.FCTRIM) + +/*! @brief Format value for bitfield MCG_C4_FCTRIM. */ +#define BF_MCG_C4_FCTRIM(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C4_FCTRIM) & BM_MCG_C4_FCTRIM) + +/*! @brief Set the FCTRIM field to a new value. */ +#define BW_MCG_C4_FCTRIM(x, v) (HW_MCG_C4_WR(x, (HW_MCG_C4_RD(x) & ~BM_MCG_C4_FCTRIM) | BF_MCG_C4_FCTRIM(v))) +/*@}*/ + +/*! + * @name Register MCG_C4, field DRST_DRS[6:5] (RW) + * + * The DRS bits select the frequency range for the FLL output, DCOOUT. When the + * LP bit is set, writes to the DRS bits are ignored. The DRST read field + * indicates the current frequency range for DCOOUT. The DRST field does not update + * immediately after a write to the DRS field due to internal synchronization between + * clock domains. See the DCO Frequency Range table for more details. + * + * Values: + * - 00 - Encoding 0 - Low range (reset default). + * - 01 - Encoding 1 - Mid range. + * - 10 - Encoding 2 - Mid-high range. + * - 11 - Encoding 3 - High range. + */ +/*@{*/ +#define BP_MCG_C4_DRST_DRS (5U) /*!< Bit position for MCG_C4_DRST_DRS. */ +#define BM_MCG_C4_DRST_DRS (0x60U) /*!< Bit mask for MCG_C4_DRST_DRS. */ +#define BS_MCG_C4_DRST_DRS (2U) /*!< Bit field size in bits for MCG_C4_DRST_DRS. */ + +/*! @brief Read current value of the MCG_C4_DRST_DRS field. */ +#define BR_MCG_C4_DRST_DRS(x) (HW_MCG_C4(x).B.DRST_DRS) + +/*! @brief Format value for bitfield MCG_C4_DRST_DRS. */ +#define BF_MCG_C4_DRST_DRS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C4_DRST_DRS) & BM_MCG_C4_DRST_DRS) + +/*! @brief Set the DRST_DRS field to a new value. */ +#define BW_MCG_C4_DRST_DRS(x, v) (HW_MCG_C4_WR(x, (HW_MCG_C4_RD(x) & ~BM_MCG_C4_DRST_DRS) | BF_MCG_C4_DRST_DRS(v))) +/*@}*/ + +/*! + * @name Register MCG_C4, field DMX32[7] (RW) + * + * The DMX32 bit controls whether the DCO frequency range is narrowed to its + * maximum frequency with a 32.768 kHz reference. The following table identifies + * settings for the DCO frequency range. The system clocks derived from this source + * should not exceed their specified maximums. DRST_DRS DMX32 Reference Range FLL + * Factor DCO Range 00 0 31.25-39.0625 kHz 640 20-25 MHz 1 32.768 kHz 732 24 MHz + * 01 0 31.25-39.0625 kHz 1280 40-50 MHz 1 32.768 kHz 1464 48 MHz 10 0 + * 31.25-39.0625 kHz 1920 60-75 MHz 1 32.768 kHz 2197 72 MHz 11 0 31.25-39.0625 kHz 2560 + * 80-100 MHz 1 32.768 kHz 2929 96 MHz + * + * Values: + * - 0 - DCO has a default range of 25%. + * - 1 - DCO is fine-tuned for maximum frequency with 32.768 kHz reference. + */ +/*@{*/ +#define BP_MCG_C4_DMX32 (7U) /*!< Bit position for MCG_C4_DMX32. */ +#define BM_MCG_C4_DMX32 (0x80U) /*!< Bit mask for MCG_C4_DMX32. */ +#define BS_MCG_C4_DMX32 (1U) /*!< Bit field size in bits for MCG_C4_DMX32. */ + +/*! @brief Read current value of the MCG_C4_DMX32 field. */ +#define BR_MCG_C4_DMX32(x) (BITBAND_ACCESS8(HW_MCG_C4_ADDR(x), BP_MCG_C4_DMX32)) + +/*! @brief Format value for bitfield MCG_C4_DMX32. */ +#define BF_MCG_C4_DMX32(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C4_DMX32) & BM_MCG_C4_DMX32) + +/*! @brief Set the DMX32 field to a new value. */ +#define BW_MCG_C4_DMX32(x, v) (BITBAND_ACCESS8(HW_MCG_C4_ADDR(x), BP_MCG_C4_DMX32) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C5 - MCG Control 5 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C5 - MCG Control 5 Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_c5 +{ + uint8_t U; + struct _hw_mcg_c5_bitfields + { + uint8_t PRDIV0 : 5; /*!< [4:0] PLL External Reference Divider */ + uint8_t PLLSTEN0 : 1; /*!< [5] PLL Stop Enable */ + uint8_t PLLCLKEN0 : 1; /*!< [6] PLL Clock Enable */ + uint8_t RESERVED0 : 1; /*!< [7] */ + } B; +} hw_mcg_c5_t; + +/*! + * @name Constants and macros for entire MCG_C5 register + */ +/*@{*/ +#define HW_MCG_C5_ADDR(x) ((x) + 0x4U) + +#define HW_MCG_C5(x) (*(__IO hw_mcg_c5_t *) HW_MCG_C5_ADDR(x)) +#define HW_MCG_C5_RD(x) (HW_MCG_C5(x).U) +#define HW_MCG_C5_WR(x, v) (HW_MCG_C5(x).U = (v)) +#define HW_MCG_C5_SET(x, v) (HW_MCG_C5_WR(x, HW_MCG_C5_RD(x) | (v))) +#define HW_MCG_C5_CLR(x, v) (HW_MCG_C5_WR(x, HW_MCG_C5_RD(x) & ~(v))) +#define HW_MCG_C5_TOG(x, v) (HW_MCG_C5_WR(x, HW_MCG_C5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C5 bitfields + */ + +/*! + * @name Register MCG_C5, field PRDIV0[4:0] (RW) + * + * Selects the amount to divide down the external reference clock for the PLL. + * The resulting frequency must be in the range of 2 MHz to 4 MHz. After the PLL + * is enabled (by setting either PLLCLKEN 0 or PLLS), the PRDIV 0 value must not + * be changed when LOCK0 is zero. PLL External Reference Divide Factor PRDIV 0 + * Divide Factor PRDIV 0 Divide Factor PRDIV 0 Divide Factor PRDIV 0 Divide Factor + * 00000 1 01000 9 10000 17 11000 25 00001 2 01001 10 10001 18 11001 Reserved + * 00010 3 01010 11 10010 19 11010 Reserved 00011 4 01011 12 10011 20 11011 Reserved + * 00100 5 01100 13 10100 21 11100 Reserved 00101 6 01101 14 10101 22 11101 + * Reserved 00110 7 01110 15 10110 23 11110 Reserved 00111 8 01111 16 10111 24 11111 + * Reserved + */ +/*@{*/ +#define BP_MCG_C5_PRDIV0 (0U) /*!< Bit position for MCG_C5_PRDIV0. */ +#define BM_MCG_C5_PRDIV0 (0x1FU) /*!< Bit mask for MCG_C5_PRDIV0. */ +#define BS_MCG_C5_PRDIV0 (5U) /*!< Bit field size in bits for MCG_C5_PRDIV0. */ + +/*! @brief Read current value of the MCG_C5_PRDIV0 field. */ +#define BR_MCG_C5_PRDIV0(x) (HW_MCG_C5(x).B.PRDIV0) + +/*! @brief Format value for bitfield MCG_C5_PRDIV0. */ +#define BF_MCG_C5_PRDIV0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C5_PRDIV0) & BM_MCG_C5_PRDIV0) + +/*! @brief Set the PRDIV0 field to a new value. */ +#define BW_MCG_C5_PRDIV0(x, v) (HW_MCG_C5_WR(x, (HW_MCG_C5_RD(x) & ~BM_MCG_C5_PRDIV0) | BF_MCG_C5_PRDIV0(v))) +/*@}*/ + +/*! + * @name Register MCG_C5, field PLLSTEN0[5] (RW) + * + * Enables the PLL Clock during Normal Stop. In Low Power Stop mode, the PLL + * clock gets disabled even if PLLSTEN 0 =1. All other power modes, PLLSTEN 0 bit + * has no affect and does not enable the PLL Clock to run if it is written to 1. + * + * Values: + * - 0 - MCGPLLCLK is disabled in any of the Stop modes. + * - 1 - MCGPLLCLK is enabled if system is in Normal Stop mode. + */ +/*@{*/ +#define BP_MCG_C5_PLLSTEN0 (5U) /*!< Bit position for MCG_C5_PLLSTEN0. */ +#define BM_MCG_C5_PLLSTEN0 (0x20U) /*!< Bit mask for MCG_C5_PLLSTEN0. */ +#define BS_MCG_C5_PLLSTEN0 (1U) /*!< Bit field size in bits for MCG_C5_PLLSTEN0. */ + +/*! @brief Read current value of the MCG_C5_PLLSTEN0 field. */ +#define BR_MCG_C5_PLLSTEN0(x) (BITBAND_ACCESS8(HW_MCG_C5_ADDR(x), BP_MCG_C5_PLLSTEN0)) + +/*! @brief Format value for bitfield MCG_C5_PLLSTEN0. */ +#define BF_MCG_C5_PLLSTEN0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C5_PLLSTEN0) & BM_MCG_C5_PLLSTEN0) + +/*! @brief Set the PLLSTEN0 field to a new value. */ +#define BW_MCG_C5_PLLSTEN0(x, v) (BITBAND_ACCESS8(HW_MCG_C5_ADDR(x), BP_MCG_C5_PLLSTEN0) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C5, field PLLCLKEN0[6] (RW) + * + * Enables the PLL independent of PLLS and enables the PLL clock for use as + * MCGPLLCLK. (PRDIV 0 needs to be programmed to the correct divider to generate a + * PLL reference clock in the range of 2 - 4 MHz range prior to setting the + * PLLCLKEN 0 bit). Setting PLLCLKEN 0 will enable the external oscillator if not + * already enabled. Whenever the PLL is being enabled by means of the PLLCLKEN 0 bit, + * and the external oscillator is being used as the reference clock, the OSCINIT 0 + * bit should be checked to make sure it is set. + * + * Values: + * - 0 - MCGPLLCLK is inactive. + * - 1 - MCGPLLCLK is active. + */ +/*@{*/ +#define BP_MCG_C5_PLLCLKEN0 (6U) /*!< Bit position for MCG_C5_PLLCLKEN0. */ +#define BM_MCG_C5_PLLCLKEN0 (0x40U) /*!< Bit mask for MCG_C5_PLLCLKEN0. */ +#define BS_MCG_C5_PLLCLKEN0 (1U) /*!< Bit field size in bits for MCG_C5_PLLCLKEN0. */ + +/*! @brief Read current value of the MCG_C5_PLLCLKEN0 field. */ +#define BR_MCG_C5_PLLCLKEN0(x) (BITBAND_ACCESS8(HW_MCG_C5_ADDR(x), BP_MCG_C5_PLLCLKEN0)) + +/*! @brief Format value for bitfield MCG_C5_PLLCLKEN0. */ +#define BF_MCG_C5_PLLCLKEN0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C5_PLLCLKEN0) & BM_MCG_C5_PLLCLKEN0) + +/*! @brief Set the PLLCLKEN0 field to a new value. */ +#define BW_MCG_C5_PLLCLKEN0(x, v) (BITBAND_ACCESS8(HW_MCG_C5_ADDR(x), BP_MCG_C5_PLLCLKEN0) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C6 - MCG Control 6 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C6 - MCG Control 6 Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_c6 +{ + uint8_t U; + struct _hw_mcg_c6_bitfields + { + uint8_t VDIV0 : 5; /*!< [4:0] VCO 0 Divider */ + uint8_t CME0 : 1; /*!< [5] Clock Monitor Enable */ + uint8_t PLLS : 1; /*!< [6] PLL Select */ + uint8_t LOLIE0 : 1; /*!< [7] Loss of Lock Interrrupt Enable */ + } B; +} hw_mcg_c6_t; + +/*! + * @name Constants and macros for entire MCG_C6 register + */ +/*@{*/ +#define HW_MCG_C6_ADDR(x) ((x) + 0x5U) + +#define HW_MCG_C6(x) (*(__IO hw_mcg_c6_t *) HW_MCG_C6_ADDR(x)) +#define HW_MCG_C6_RD(x) (HW_MCG_C6(x).U) +#define HW_MCG_C6_WR(x, v) (HW_MCG_C6(x).U = (v)) +#define HW_MCG_C6_SET(x, v) (HW_MCG_C6_WR(x, HW_MCG_C6_RD(x) | (v))) +#define HW_MCG_C6_CLR(x, v) (HW_MCG_C6_WR(x, HW_MCG_C6_RD(x) & ~(v))) +#define HW_MCG_C6_TOG(x, v) (HW_MCG_C6_WR(x, HW_MCG_C6_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C6 bitfields + */ + +/*! + * @name Register MCG_C6, field VDIV0[4:0] (RW) + * + * Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits + * establish the multiplication factor (M) applied to the reference clock frequency. + * After the PLL is enabled (by setting either PLLCLKEN 0 or PLLS), the VDIV 0 + * value must not be changed when LOCK 0 is zero. PLL VCO Divide Factor VDIV 0 + * Multiply Factor VDIV 0 Multiply Factor VDIV 0 Multiply Factor VDIV 0 Multiply + * Factor 00000 24 01000 32 10000 40 11000 48 00001 25 01001 33 10001 41 11001 49 + * 00010 26 01010 34 10010 42 11010 50 00011 27 01011 35 10011 43 11011 51 00100 28 + * 01100 36 10100 44 11100 52 00101 29 01101 37 10101 45 11101 53 00110 30 01110 + * 38 10110 46 11110 54 00111 31 01111 39 10111 47 11111 55 + */ +/*@{*/ +#define BP_MCG_C6_VDIV0 (0U) /*!< Bit position for MCG_C6_VDIV0. */ +#define BM_MCG_C6_VDIV0 (0x1FU) /*!< Bit mask for MCG_C6_VDIV0. */ +#define BS_MCG_C6_VDIV0 (5U) /*!< Bit field size in bits for MCG_C6_VDIV0. */ + +/*! @brief Read current value of the MCG_C6_VDIV0 field. */ +#define BR_MCG_C6_VDIV0(x) (HW_MCG_C6(x).B.VDIV0) + +/*! @brief Format value for bitfield MCG_C6_VDIV0. */ +#define BF_MCG_C6_VDIV0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C6_VDIV0) & BM_MCG_C6_VDIV0) + +/*! @brief Set the VDIV0 field to a new value. */ +#define BW_MCG_C6_VDIV0(x, v) (HW_MCG_C6_WR(x, (HW_MCG_C6_RD(x) & ~BM_MCG_C6_VDIV0) | BF_MCG_C6_VDIV0(v))) +/*@}*/ + +/*! + * @name Register MCG_C6, field CME0[5] (RW) + * + * Enables the loss of clock monitoring circuit for the OSC0 external reference + * mux select. The LOCRE0 bit will determine if a interrupt or a reset request is + * generated following a loss of OSC0 indication. The CME0 bit must only be set + * to a logic 1 when the MCG is in an operational mode that uses the external + * clock (FEE, FBE, PEE, PBE, or BLPE) . Whenever the CME0 bit is set to a logic 1, + * the value of the RANGE0 bits in the C2 register should not be changed. CME0 + * bit should be set to a logic 0 before the MCG enters any Stop mode. Otherwise, a + * reset request may occur while in Stop mode. CME0 should also be set to a + * logic 0 before entering VLPR or VLPW power modes if the MCG is in BLPE mode. + * + * Values: + * - 0 - External clock monitor is disabled for OSC0. + * - 1 - External clock monitor is enabled for OSC0. + */ +/*@{*/ +#define BP_MCG_C6_CME0 (5U) /*!< Bit position for MCG_C6_CME0. */ +#define BM_MCG_C6_CME0 (0x20U) /*!< Bit mask for MCG_C6_CME0. */ +#define BS_MCG_C6_CME0 (1U) /*!< Bit field size in bits for MCG_C6_CME0. */ + +/*! @brief Read current value of the MCG_C6_CME0 field. */ +#define BR_MCG_C6_CME0(x) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_CME0)) + +/*! @brief Format value for bitfield MCG_C6_CME0. */ +#define BF_MCG_C6_CME0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C6_CME0) & BM_MCG_C6_CME0) + +/*! @brief Set the CME0 field to a new value. */ +#define BW_MCG_C6_CME0(x, v) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_CME0) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C6, field PLLS[6] (RW) + * + * Controls whether the PLL or FLL output is selected as the MCG source when + * CLKS[1:0]=00. If the PLLS bit is cleared and PLLCLKEN 0 is not set, the PLL is + * disabled in all modes. If the PLLS is set, the FLL is disabled in all modes. + * + * Values: + * - 0 - FLL is selected. + * - 1 - PLL is selected (PRDIV 0 need to be programmed to the correct divider + * to generate a PLL reference clock in the range of 2-4 MHz prior to setting + * the PLLS bit). + */ +/*@{*/ +#define BP_MCG_C6_PLLS (6U) /*!< Bit position for MCG_C6_PLLS. */ +#define BM_MCG_C6_PLLS (0x40U) /*!< Bit mask for MCG_C6_PLLS. */ +#define BS_MCG_C6_PLLS (1U) /*!< Bit field size in bits for MCG_C6_PLLS. */ + +/*! @brief Read current value of the MCG_C6_PLLS field. */ +#define BR_MCG_C6_PLLS(x) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_PLLS)) + +/*! @brief Format value for bitfield MCG_C6_PLLS. */ +#define BF_MCG_C6_PLLS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C6_PLLS) & BM_MCG_C6_PLLS) + +/*! @brief Set the PLLS field to a new value. */ +#define BW_MCG_C6_PLLS(x, v) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_PLLS) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C6, field LOLIE0[7] (RW) + * + * Determines if an interrupt request is made following a loss of lock + * indication. This bit only has an effect when LOLS 0 is set. + * + * Values: + * - 0 - No interrupt request is generated on loss of lock. + * - 1 - Generate an interrupt request on loss of lock. + */ +/*@{*/ +#define BP_MCG_C6_LOLIE0 (7U) /*!< Bit position for MCG_C6_LOLIE0. */ +#define BM_MCG_C6_LOLIE0 (0x80U) /*!< Bit mask for MCG_C6_LOLIE0. */ +#define BS_MCG_C6_LOLIE0 (1U) /*!< Bit field size in bits for MCG_C6_LOLIE0. */ + +/*! @brief Read current value of the MCG_C6_LOLIE0 field. */ +#define BR_MCG_C6_LOLIE0(x) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_LOLIE0)) + +/*! @brief Format value for bitfield MCG_C6_LOLIE0. */ +#define BF_MCG_C6_LOLIE0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C6_LOLIE0) & BM_MCG_C6_LOLIE0) + +/*! @brief Set the LOLIE0 field to a new value. */ +#define BW_MCG_C6_LOLIE0(x, v) (BITBAND_ACCESS8(HW_MCG_C6_ADDR(x), BP_MCG_C6_LOLIE0) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_S - MCG Status Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_S - MCG Status Register (RW) + * + * Reset value: 0x10U + */ +typedef union _hw_mcg_s +{ + uint8_t U; + struct _hw_mcg_s_bitfields + { + uint8_t IRCST : 1; /*!< [0] Internal Reference Clock Status */ + uint8_t OSCINIT0 : 1; /*!< [1] OSC Initialization */ + uint8_t CLKST : 2; /*!< [3:2] Clock Mode Status */ + uint8_t IREFST : 1; /*!< [4] Internal Reference Status */ + uint8_t PLLST : 1; /*!< [5] PLL Select Status */ + uint8_t LOCK0 : 1; /*!< [6] Lock Status */ + uint8_t LOLS0 : 1; /*!< [7] Loss of Lock Status */ + } B; +} hw_mcg_s_t; + +/*! + * @name Constants and macros for entire MCG_S register + */ +/*@{*/ +#define HW_MCG_S_ADDR(x) ((x) + 0x6U) + +#define HW_MCG_S(x) (*(__IO hw_mcg_s_t *) HW_MCG_S_ADDR(x)) +#define HW_MCG_S_RD(x) (HW_MCG_S(x).U) +#define HW_MCG_S_WR(x, v) (HW_MCG_S(x).U = (v)) +#define HW_MCG_S_SET(x, v) (HW_MCG_S_WR(x, HW_MCG_S_RD(x) | (v))) +#define HW_MCG_S_CLR(x, v) (HW_MCG_S_WR(x, HW_MCG_S_RD(x) & ~(v))) +#define HW_MCG_S_TOG(x, v) (HW_MCG_S_WR(x, HW_MCG_S_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_S bitfields + */ + +/*! + * @name Register MCG_S, field IRCST[0] (RO) + * + * The IRCST bit indicates the current source for the internal reference clock + * select clock (IRCSCLK). The IRCST bit does not update immediately after a write + * to the IRCS bit due to internal synchronization between clock domains. The + * IRCST bit will only be updated if the internal reference clock is enabled, + * either by the MCG being in a mode that uses the IRC or by setting the C1[IRCLKEN] + * bit . + * + * Values: + * - 0 - Source of internal reference clock is the slow clock (32 kHz IRC). + * - 1 - Source of internal reference clock is the fast clock (4 MHz IRC). + */ +/*@{*/ +#define BP_MCG_S_IRCST (0U) /*!< Bit position for MCG_S_IRCST. */ +#define BM_MCG_S_IRCST (0x01U) /*!< Bit mask for MCG_S_IRCST. */ +#define BS_MCG_S_IRCST (1U) /*!< Bit field size in bits for MCG_S_IRCST. */ + +/*! @brief Read current value of the MCG_S_IRCST field. */ +#define BR_MCG_S_IRCST(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_IRCST)) +/*@}*/ + +/*! + * @name Register MCG_S, field OSCINIT0[1] (RO) + * + * This bit, which resets to 0, is set to 1 after the initialization cycles of + * the crystal oscillator clock have completed. After being set, the bit is + * cleared to 0 if the OSC is subsequently disabled. See the OSC module's detailed + * description for more information. + */ +/*@{*/ +#define BP_MCG_S_OSCINIT0 (1U) /*!< Bit position for MCG_S_OSCINIT0. */ +#define BM_MCG_S_OSCINIT0 (0x02U) /*!< Bit mask for MCG_S_OSCINIT0. */ +#define BS_MCG_S_OSCINIT0 (1U) /*!< Bit field size in bits for MCG_S_OSCINIT0. */ + +/*! @brief Read current value of the MCG_S_OSCINIT0 field. */ +#define BR_MCG_S_OSCINIT0(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_OSCINIT0)) +/*@}*/ + +/*! + * @name Register MCG_S, field CLKST[3:2] (RO) + * + * These bits indicate the current clock mode. The CLKST bits do not update + * immediately after a write to the CLKS bits due to internal synchronization between + * clock domains. + * + * Values: + * - 00 - Encoding 0 - Output of the FLL is selected (reset default). + * - 01 - Encoding 1 - Internal reference clock is selected. + * - 10 - Encoding 2 - External reference clock is selected. + * - 11 - Encoding 3 - Output of the PLL is selected. + */ +/*@{*/ +#define BP_MCG_S_CLKST (2U) /*!< Bit position for MCG_S_CLKST. */ +#define BM_MCG_S_CLKST (0x0CU) /*!< Bit mask for MCG_S_CLKST. */ +#define BS_MCG_S_CLKST (2U) /*!< Bit field size in bits for MCG_S_CLKST. */ + +/*! @brief Read current value of the MCG_S_CLKST field. */ +#define BR_MCG_S_CLKST(x) (HW_MCG_S(x).B.CLKST) +/*@}*/ + +/*! + * @name Register MCG_S, field IREFST[4] (RO) + * + * This bit indicates the current source for the FLL reference clock. The IREFST + * bit does not update immediately after a write to the IREFS bit due to + * internal synchronization between clock domains. + * + * Values: + * - 0 - Source of FLL reference clock is the external reference clock. + * - 1 - Source of FLL reference clock is the internal reference clock. + */ +/*@{*/ +#define BP_MCG_S_IREFST (4U) /*!< Bit position for MCG_S_IREFST. */ +#define BM_MCG_S_IREFST (0x10U) /*!< Bit mask for MCG_S_IREFST. */ +#define BS_MCG_S_IREFST (1U) /*!< Bit field size in bits for MCG_S_IREFST. */ + +/*! @brief Read current value of the MCG_S_IREFST field. */ +#define BR_MCG_S_IREFST(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_IREFST)) +/*@}*/ + +/*! + * @name Register MCG_S, field PLLST[5] (RO) + * + * This bit indicates the clock source selected by PLLS . The PLLST bit does not + * update immediately after a write to the PLLS bit due to internal + * synchronization between clock domains. + * + * Values: + * - 0 - Source of PLLS clock is FLL clock. + * - 1 - Source of PLLS clock is PLL output clock. + */ +/*@{*/ +#define BP_MCG_S_PLLST (5U) /*!< Bit position for MCG_S_PLLST. */ +#define BM_MCG_S_PLLST (0x20U) /*!< Bit mask for MCG_S_PLLST. */ +#define BS_MCG_S_PLLST (1U) /*!< Bit field size in bits for MCG_S_PLLST. */ + +/*! @brief Read current value of the MCG_S_PLLST field. */ +#define BR_MCG_S_PLLST(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_PLLST)) +/*@}*/ + +/*! + * @name Register MCG_S, field LOCK0[6] (RO) + * + * This bit indicates whether the PLL has acquired lock. Lock detection is only + * enabled when the PLL is enabled (either through clock mode selection or + * PLLCLKEN0=1 setting). While the PLL clock is locking to the desired frequency, the + * MCG PLL clock (MCGPLLCLK) will be gated off until the LOCK bit gets asserted. + * If the lock status bit is set, changing the value of the PRDIV0 [4:0] bits in + * the C5 register or the VDIV0[4:0] bits in the C6 register causes the lock + * status bit to clear and stay cleared until the PLL has reacquired lock. Loss of PLL + * reference clock will also cause the LOCK0 bit to clear until the PLL has + * reacquired lock. Entry into LLS, VLPS, or regular Stop with PLLSTEN=0 also causes + * the lock status bit to clear and stay cleared until the Stop mode is exited + * and the PLL has reacquired lock. Any time the PLL is enabled and the LOCK0 bit + * is cleared, the MCGPLLCLK will be gated off until the LOCK0 bit is asserted + * again. + * + * Values: + * - 0 - PLL is currently unlocked. + * - 1 - PLL is currently locked. + */ +/*@{*/ +#define BP_MCG_S_LOCK0 (6U) /*!< Bit position for MCG_S_LOCK0. */ +#define BM_MCG_S_LOCK0 (0x40U) /*!< Bit mask for MCG_S_LOCK0. */ +#define BS_MCG_S_LOCK0 (1U) /*!< Bit field size in bits for MCG_S_LOCK0. */ + +/*! @brief Read current value of the MCG_S_LOCK0 field. */ +#define BR_MCG_S_LOCK0(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_LOCK0)) +/*@}*/ + +/*! + * @name Register MCG_S, field LOLS0[7] (W1C) + * + * This bit is a sticky bit indicating the lock status for the PLL. LOLS is set + * if after acquiring lock, the PLL output frequency has fallen outside the lock + * exit frequency tolerance, D unl . LOLIE determines whether an interrupt + * request is made when LOLS is set. LOLRE determines whether a reset request is made + * when LOLS is set. This bit is cleared by reset or by writing a logic 1 to it + * when set. Writing a logic 0 to this bit has no effect. + * + * Values: + * - 0 - PLL has not lost lock since LOLS 0 was last cleared. + * - 1 - PLL has lost lock since LOLS 0 was last cleared. + */ +/*@{*/ +#define BP_MCG_S_LOLS0 (7U) /*!< Bit position for MCG_S_LOLS0. */ +#define BM_MCG_S_LOLS0 (0x80U) /*!< Bit mask for MCG_S_LOLS0. */ +#define BS_MCG_S_LOLS0 (1U) /*!< Bit field size in bits for MCG_S_LOLS0. */ + +/*! @brief Read current value of the MCG_S_LOLS0 field. */ +#define BR_MCG_S_LOLS0(x) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_LOLS0)) + +/*! @brief Format value for bitfield MCG_S_LOLS0. */ +#define BF_MCG_S_LOLS0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_S_LOLS0) & BM_MCG_S_LOLS0) + +/*! @brief Set the LOLS0 field to a new value. */ +#define BW_MCG_S_LOLS0(x, v) (BITBAND_ACCESS8(HW_MCG_S_ADDR(x), BP_MCG_S_LOLS0) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_SC - MCG Status and Control Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_SC - MCG Status and Control Register (RW) + * + * Reset value: 0x02U + */ +typedef union _hw_mcg_sc +{ + uint8_t U; + struct _hw_mcg_sc_bitfields + { + uint8_t LOCS0 : 1; /*!< [0] OSC0 Loss of Clock Status */ + uint8_t FCRDIV : 3; /*!< [3:1] Fast Clock Internal Reference Divider + * */ + uint8_t FLTPRSRV : 1; /*!< [4] FLL Filter Preserve Enable */ + uint8_t ATMF : 1; /*!< [5] Automatic Trim Machine Fail Flag */ + uint8_t ATMS : 1; /*!< [6] Automatic Trim Machine Select */ + uint8_t ATME : 1; /*!< [7] Automatic Trim Machine Enable */ + } B; +} hw_mcg_sc_t; + +/*! + * @name Constants and macros for entire MCG_SC register + */ +/*@{*/ +#define HW_MCG_SC_ADDR(x) ((x) + 0x8U) + +#define HW_MCG_SC(x) (*(__IO hw_mcg_sc_t *) HW_MCG_SC_ADDR(x)) +#define HW_MCG_SC_RD(x) (HW_MCG_SC(x).U) +#define HW_MCG_SC_WR(x, v) (HW_MCG_SC(x).U = (v)) +#define HW_MCG_SC_SET(x, v) (HW_MCG_SC_WR(x, HW_MCG_SC_RD(x) | (v))) +#define HW_MCG_SC_CLR(x, v) (HW_MCG_SC_WR(x, HW_MCG_SC_RD(x) & ~(v))) +#define HW_MCG_SC_TOG(x, v) (HW_MCG_SC_WR(x, HW_MCG_SC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_SC bitfields + */ + +/*! + * @name Register MCG_SC, field LOCS0[0] (W1C) + * + * The LOCS0 indicates when a loss of OSC0 reference clock has occurred. The + * LOCS0 bit only has an effect when CME0 is set. This bit is cleared by writing a + * logic 1 to it when set. + * + * Values: + * - 0 - Loss of OSC0 has not occurred. + * - 1 - Loss of OSC0 has occurred. + */ +/*@{*/ +#define BP_MCG_SC_LOCS0 (0U) /*!< Bit position for MCG_SC_LOCS0. */ +#define BM_MCG_SC_LOCS0 (0x01U) /*!< Bit mask for MCG_SC_LOCS0. */ +#define BS_MCG_SC_LOCS0 (1U) /*!< Bit field size in bits for MCG_SC_LOCS0. */ + +/*! @brief Read current value of the MCG_SC_LOCS0 field. */ +#define BR_MCG_SC_LOCS0(x) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_LOCS0)) + +/*! @brief Format value for bitfield MCG_SC_LOCS0. */ +#define BF_MCG_SC_LOCS0(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_LOCS0) & BM_MCG_SC_LOCS0) + +/*! @brief Set the LOCS0 field to a new value. */ +#define BW_MCG_SC_LOCS0(x, v) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_LOCS0) = (v)) +/*@}*/ + +/*! + * @name Register MCG_SC, field FCRDIV[3:1] (RW) + * + * Selects the amount to divide down the fast internal reference clock. The + * resulting frequency will be in the range 31.25 kHz to 4 MHz (Note: Changing the + * divider when the Fast IRC is enabled is not supported). + * + * Values: + * - 000 - Divide Factor is 1 + * - 001 - Divide Factor is 2. + * - 010 - Divide Factor is 4. + * - 011 - Divide Factor is 8. + * - 100 - Divide Factor is 16 + * - 101 - Divide Factor is 32 + * - 110 - Divide Factor is 64 + * - 111 - Divide Factor is 128. + */ +/*@{*/ +#define BP_MCG_SC_FCRDIV (1U) /*!< Bit position for MCG_SC_FCRDIV. */ +#define BM_MCG_SC_FCRDIV (0x0EU) /*!< Bit mask for MCG_SC_FCRDIV. */ +#define BS_MCG_SC_FCRDIV (3U) /*!< Bit field size in bits for MCG_SC_FCRDIV. */ + +/*! @brief Read current value of the MCG_SC_FCRDIV field. */ +#define BR_MCG_SC_FCRDIV(x) (HW_MCG_SC(x).B.FCRDIV) + +/*! @brief Format value for bitfield MCG_SC_FCRDIV. */ +#define BF_MCG_SC_FCRDIV(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_FCRDIV) & BM_MCG_SC_FCRDIV) + +/*! @brief Set the FCRDIV field to a new value. */ +#define BW_MCG_SC_FCRDIV(x, v) (HW_MCG_SC_WR(x, (HW_MCG_SC_RD(x) & ~BM_MCG_SC_FCRDIV) | BF_MCG_SC_FCRDIV(v))) +/*@}*/ + +/*! + * @name Register MCG_SC, field FLTPRSRV[4] (RW) + * + * This bit will prevent the FLL filter values from resetting allowing the FLL + * output frequency to remain the same during clock mode changes where the FLL/DCO + * output is still valid. (Note: This requires that the FLL reference frequency + * to remain the same as what it was prior to the new clock mode switch. + * Otherwise FLL filter and frequency values will change.) + * + * Values: + * - 0 - FLL filter and FLL frequency will reset on changes to currect clock + * mode. + * - 1 - Fll filter and FLL frequency retain their previous values during new + * clock mode change. + */ +/*@{*/ +#define BP_MCG_SC_FLTPRSRV (4U) /*!< Bit position for MCG_SC_FLTPRSRV. */ +#define BM_MCG_SC_FLTPRSRV (0x10U) /*!< Bit mask for MCG_SC_FLTPRSRV. */ +#define BS_MCG_SC_FLTPRSRV (1U) /*!< Bit field size in bits for MCG_SC_FLTPRSRV. */ + +/*! @brief Read current value of the MCG_SC_FLTPRSRV field. */ +#define BR_MCG_SC_FLTPRSRV(x) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_FLTPRSRV)) + +/*! @brief Format value for bitfield MCG_SC_FLTPRSRV. */ +#define BF_MCG_SC_FLTPRSRV(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_FLTPRSRV) & BM_MCG_SC_FLTPRSRV) + +/*! @brief Set the FLTPRSRV field to a new value. */ +#define BW_MCG_SC_FLTPRSRV(x, v) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_FLTPRSRV) = (v)) +/*@}*/ + +/*! + * @name Register MCG_SC, field ATMF[5] (RW) + * + * Fail flag for the Automatic Trim Machine (ATM). This bit asserts when the + * Automatic Trim Machine is enabled, ATME=1, and a write to the C1, C3, C4, and SC + * registers is detected or the MCG enters into any Stop mode. A write to ATMF + * clears the flag. + * + * Values: + * - 0 - Automatic Trim Machine completed normally. + * - 1 - Automatic Trim Machine failed. + */ +/*@{*/ +#define BP_MCG_SC_ATMF (5U) /*!< Bit position for MCG_SC_ATMF. */ +#define BM_MCG_SC_ATMF (0x20U) /*!< Bit mask for MCG_SC_ATMF. */ +#define BS_MCG_SC_ATMF (1U) /*!< Bit field size in bits for MCG_SC_ATMF. */ + +/*! @brief Read current value of the MCG_SC_ATMF field. */ +#define BR_MCG_SC_ATMF(x) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATMF)) + +/*! @brief Format value for bitfield MCG_SC_ATMF. */ +#define BF_MCG_SC_ATMF(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_ATMF) & BM_MCG_SC_ATMF) + +/*! @brief Set the ATMF field to a new value. */ +#define BW_MCG_SC_ATMF(x, v) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATMF) = (v)) +/*@}*/ + +/*! + * @name Register MCG_SC, field ATMS[6] (RW) + * + * Selects the IRCS clock for Auto Trim Test. + * + * Values: + * - 0 - 32 kHz Internal Reference Clock selected. + * - 1 - 4 MHz Internal Reference Clock selected. + */ +/*@{*/ +#define BP_MCG_SC_ATMS (6U) /*!< Bit position for MCG_SC_ATMS. */ +#define BM_MCG_SC_ATMS (0x40U) /*!< Bit mask for MCG_SC_ATMS. */ +#define BS_MCG_SC_ATMS (1U) /*!< Bit field size in bits for MCG_SC_ATMS. */ + +/*! @brief Read current value of the MCG_SC_ATMS field. */ +#define BR_MCG_SC_ATMS(x) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATMS)) + +/*! @brief Format value for bitfield MCG_SC_ATMS. */ +#define BF_MCG_SC_ATMS(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_ATMS) & BM_MCG_SC_ATMS) + +/*! @brief Set the ATMS field to a new value. */ +#define BW_MCG_SC_ATMS(x, v) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATMS) = (v)) +/*@}*/ + +/*! + * @name Register MCG_SC, field ATME[7] (RW) + * + * Enables the Auto Trim Machine to start automatically trimming the selected + * Internal Reference Clock. ATME deasserts after the Auto Trim Machine has + * completed trimming all trim bits of the IRCS clock selected by the ATMS bit. Writing + * to C1, C3, C4, and SC registers or entering Stop mode aborts the auto trim + * operation and clears this bit. + * + * Values: + * - 0 - Auto Trim Machine disabled. + * - 1 - Auto Trim Machine enabled. + */ +/*@{*/ +#define BP_MCG_SC_ATME (7U) /*!< Bit position for MCG_SC_ATME. */ +#define BM_MCG_SC_ATME (0x80U) /*!< Bit mask for MCG_SC_ATME. */ +#define BS_MCG_SC_ATME (1U) /*!< Bit field size in bits for MCG_SC_ATME. */ + +/*! @brief Read current value of the MCG_SC_ATME field. */ +#define BR_MCG_SC_ATME(x) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATME)) + +/*! @brief Format value for bitfield MCG_SC_ATME. */ +#define BF_MCG_SC_ATME(v) ((uint8_t)((uint8_t)(v) << BP_MCG_SC_ATME) & BM_MCG_SC_ATME) + +/*! @brief Set the ATME field to a new value. */ +#define BW_MCG_SC_ATME(x, v) (BITBAND_ACCESS8(HW_MCG_SC_ADDR(x), BP_MCG_SC_ATME) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_ATCVH - MCG Auto Trim Compare Value High Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_ATCVH - MCG Auto Trim Compare Value High Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_atcvh +{ + uint8_t U; + struct _hw_mcg_atcvh_bitfields + { + uint8_t ATCVH : 8; /*!< [7:0] ATM Compare Value High */ + } B; +} hw_mcg_atcvh_t; + +/*! + * @name Constants and macros for entire MCG_ATCVH register + */ +/*@{*/ +#define HW_MCG_ATCVH_ADDR(x) ((x) + 0xAU) + +#define HW_MCG_ATCVH(x) (*(__IO hw_mcg_atcvh_t *) HW_MCG_ATCVH_ADDR(x)) +#define HW_MCG_ATCVH_RD(x) (HW_MCG_ATCVH(x).U) +#define HW_MCG_ATCVH_WR(x, v) (HW_MCG_ATCVH(x).U = (v)) +#define HW_MCG_ATCVH_SET(x, v) (HW_MCG_ATCVH_WR(x, HW_MCG_ATCVH_RD(x) | (v))) +#define HW_MCG_ATCVH_CLR(x, v) (HW_MCG_ATCVH_WR(x, HW_MCG_ATCVH_RD(x) & ~(v))) +#define HW_MCG_ATCVH_TOG(x, v) (HW_MCG_ATCVH_WR(x, HW_MCG_ATCVH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_ATCVH bitfields + */ + +/*! + * @name Register MCG_ATCVH, field ATCVH[7:0] (RW) + * + * Values are used by Auto Trim Machine to compare and adjust Internal Reference + * trim values during ATM SAR conversion. + */ +/*@{*/ +#define BP_MCG_ATCVH_ATCVH (0U) /*!< Bit position for MCG_ATCVH_ATCVH. */ +#define BM_MCG_ATCVH_ATCVH (0xFFU) /*!< Bit mask for MCG_ATCVH_ATCVH. */ +#define BS_MCG_ATCVH_ATCVH (8U) /*!< Bit field size in bits for MCG_ATCVH_ATCVH. */ + +/*! @brief Read current value of the MCG_ATCVH_ATCVH field. */ +#define BR_MCG_ATCVH_ATCVH(x) (HW_MCG_ATCVH(x).U) + +/*! @brief Format value for bitfield MCG_ATCVH_ATCVH. */ +#define BF_MCG_ATCVH_ATCVH(v) ((uint8_t)((uint8_t)(v) << BP_MCG_ATCVH_ATCVH) & BM_MCG_ATCVH_ATCVH) + +/*! @brief Set the ATCVH field to a new value. */ +#define BW_MCG_ATCVH_ATCVH(x, v) (HW_MCG_ATCVH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_ATCVL - MCG Auto Trim Compare Value Low Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_ATCVL - MCG Auto Trim Compare Value Low Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_atcvl +{ + uint8_t U; + struct _hw_mcg_atcvl_bitfields + { + uint8_t ATCVL : 8; /*!< [7:0] ATM Compare Value Low */ + } B; +} hw_mcg_atcvl_t; + +/*! + * @name Constants and macros for entire MCG_ATCVL register + */ +/*@{*/ +#define HW_MCG_ATCVL_ADDR(x) ((x) + 0xBU) + +#define HW_MCG_ATCVL(x) (*(__IO hw_mcg_atcvl_t *) HW_MCG_ATCVL_ADDR(x)) +#define HW_MCG_ATCVL_RD(x) (HW_MCG_ATCVL(x).U) +#define HW_MCG_ATCVL_WR(x, v) (HW_MCG_ATCVL(x).U = (v)) +#define HW_MCG_ATCVL_SET(x, v) (HW_MCG_ATCVL_WR(x, HW_MCG_ATCVL_RD(x) | (v))) +#define HW_MCG_ATCVL_CLR(x, v) (HW_MCG_ATCVL_WR(x, HW_MCG_ATCVL_RD(x) & ~(v))) +#define HW_MCG_ATCVL_TOG(x, v) (HW_MCG_ATCVL_WR(x, HW_MCG_ATCVL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_ATCVL bitfields + */ + +/*! + * @name Register MCG_ATCVL, field ATCVL[7:0] (RW) + * + * Values are used by Auto Trim Machine to compare and adjust Internal Reference + * trim values during ATM SAR conversion. + */ +/*@{*/ +#define BP_MCG_ATCVL_ATCVL (0U) /*!< Bit position for MCG_ATCVL_ATCVL. */ +#define BM_MCG_ATCVL_ATCVL (0xFFU) /*!< Bit mask for MCG_ATCVL_ATCVL. */ +#define BS_MCG_ATCVL_ATCVL (8U) /*!< Bit field size in bits for MCG_ATCVL_ATCVL. */ + +/*! @brief Read current value of the MCG_ATCVL_ATCVL field. */ +#define BR_MCG_ATCVL_ATCVL(x) (HW_MCG_ATCVL(x).U) + +/*! @brief Format value for bitfield MCG_ATCVL_ATCVL. */ +#define BF_MCG_ATCVL_ATCVL(v) ((uint8_t)((uint8_t)(v) << BP_MCG_ATCVL_ATCVL) & BM_MCG_ATCVL_ATCVL) + +/*! @brief Set the ATCVL field to a new value. */ +#define BW_MCG_ATCVL_ATCVL(x, v) (HW_MCG_ATCVL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C7 - MCG Control 7 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C7 - MCG Control 7 Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_mcg_c7 +{ + uint8_t U; + struct _hw_mcg_c7_bitfields + { + uint8_t OSCSEL : 2; /*!< [1:0] MCG OSC Clock Select */ + uint8_t RESERVED0 : 6; /*!< [7:2] */ + } B; +} hw_mcg_c7_t; + +/*! + * @name Constants and macros for entire MCG_C7 register + */ +/*@{*/ +#define HW_MCG_C7_ADDR(x) ((x) + 0xCU) + +#define HW_MCG_C7(x) (*(__IO hw_mcg_c7_t *) HW_MCG_C7_ADDR(x)) +#define HW_MCG_C7_RD(x) (HW_MCG_C7(x).U) +#define HW_MCG_C7_WR(x, v) (HW_MCG_C7(x).U = (v)) +#define HW_MCG_C7_SET(x, v) (HW_MCG_C7_WR(x, HW_MCG_C7_RD(x) | (v))) +#define HW_MCG_C7_CLR(x, v) (HW_MCG_C7_WR(x, HW_MCG_C7_RD(x) & ~(v))) +#define HW_MCG_C7_TOG(x, v) (HW_MCG_C7_WR(x, HW_MCG_C7_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C7 bitfields + */ + +/*! + * @name Register MCG_C7, field OSCSEL[1:0] (RW) + * + * Selects the MCG FLL external reference clock + * + * Values: + * - 00 - Selects Oscillator (OSCCLK0). + * - 01 - Selects 32 kHz RTC Oscillator. + * - 10 - Selects Oscillator (OSCCLK1). + * - 11 - RESERVED + */ +/*@{*/ +#define BP_MCG_C7_OSCSEL (0U) /*!< Bit position for MCG_C7_OSCSEL. */ +#define BM_MCG_C7_OSCSEL (0x03U) /*!< Bit mask for MCG_C7_OSCSEL. */ +#define BS_MCG_C7_OSCSEL (2U) /*!< Bit field size in bits for MCG_C7_OSCSEL. */ + +/*! @brief Read current value of the MCG_C7_OSCSEL field. */ +#define BR_MCG_C7_OSCSEL(x) (HW_MCG_C7(x).B.OSCSEL) + +/*! @brief Format value for bitfield MCG_C7_OSCSEL. */ +#define BF_MCG_C7_OSCSEL(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C7_OSCSEL) & BM_MCG_C7_OSCSEL) + +/*! @brief Set the OSCSEL field to a new value. */ +#define BW_MCG_C7_OSCSEL(x, v) (HW_MCG_C7_WR(x, (HW_MCG_C7_RD(x) & ~BM_MCG_C7_OSCSEL) | BF_MCG_C7_OSCSEL(v))) +/*@}*/ + +/******************************************************************************* + * HW_MCG_C8 - MCG Control 8 Register + ******************************************************************************/ + +/*! + * @brief HW_MCG_C8 - MCG Control 8 Register (RW) + * + * Reset value: 0x80U + */ +typedef union _hw_mcg_c8 +{ + uint8_t U; + struct _hw_mcg_c8_bitfields + { + uint8_t LOCS1 : 1; /*!< [0] RTC Loss of Clock Status */ + uint8_t RESERVED0 : 4; /*!< [4:1] */ + uint8_t CME1 : 1; /*!< [5] Clock Monitor Enable1 */ + uint8_t LOLRE : 1; /*!< [6] PLL Loss of Lock Reset Enable */ + uint8_t LOCRE1 : 1; /*!< [7] Loss of Clock Reset Enable */ + } B; +} hw_mcg_c8_t; + +/*! + * @name Constants and macros for entire MCG_C8 register + */ +/*@{*/ +#define HW_MCG_C8_ADDR(x) ((x) + 0xDU) + +#define HW_MCG_C8(x) (*(__IO hw_mcg_c8_t *) HW_MCG_C8_ADDR(x)) +#define HW_MCG_C8_RD(x) (HW_MCG_C8(x).U) +#define HW_MCG_C8_WR(x, v) (HW_MCG_C8(x).U = (v)) +#define HW_MCG_C8_SET(x, v) (HW_MCG_C8_WR(x, HW_MCG_C8_RD(x) | (v))) +#define HW_MCG_C8_CLR(x, v) (HW_MCG_C8_WR(x, HW_MCG_C8_RD(x) & ~(v))) +#define HW_MCG_C8_TOG(x, v) (HW_MCG_C8_WR(x, HW_MCG_C8_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCG_C8 bitfields + */ + +/*! + * @name Register MCG_C8, field LOCS1[0] (W1C) + * + * This bit indicates when a loss of clock has occurred. This bit is cleared by + * writing a logic 1 to it when set. + * + * Values: + * - 0 - Loss of RTC has not occur. + * - 1 - Loss of RTC has occur + */ +/*@{*/ +#define BP_MCG_C8_LOCS1 (0U) /*!< Bit position for MCG_C8_LOCS1. */ +#define BM_MCG_C8_LOCS1 (0x01U) /*!< Bit mask for MCG_C8_LOCS1. */ +#define BS_MCG_C8_LOCS1 (1U) /*!< Bit field size in bits for MCG_C8_LOCS1. */ + +/*! @brief Read current value of the MCG_C8_LOCS1 field. */ +#define BR_MCG_C8_LOCS1(x) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOCS1)) + +/*! @brief Format value for bitfield MCG_C8_LOCS1. */ +#define BF_MCG_C8_LOCS1(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C8_LOCS1) & BM_MCG_C8_LOCS1) + +/*! @brief Set the LOCS1 field to a new value. */ +#define BW_MCG_C8_LOCS1(x, v) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOCS1) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C8, field CME1[5] (RW) + * + * Enables the loss of clock monitoring circuit for the output of the RTC + * external reference clock. The LOCRE1 bit will determine whether an interrupt or a + * reset request is generated following a loss of RTC clock indication. The CME1 + * bit should be set to a logic 1 when the MCG is in an operational mode that uses + * the RTC as its external reference clock or if the RTC is operational. CME1 bit + * must be set to a logic 0 before the MCG enters any Stop mode. Otherwise, a + * reset request may occur when in Stop mode. CME1 should also be set to a logic 0 + * before entering VLPR or VLPW power modes. + * + * Values: + * - 0 - External clock monitor is disabled for RTC clock. + * - 1 - External clock monitor is enabled for RTC clock. + */ +/*@{*/ +#define BP_MCG_C8_CME1 (5U) /*!< Bit position for MCG_C8_CME1. */ +#define BM_MCG_C8_CME1 (0x20U) /*!< Bit mask for MCG_C8_CME1. */ +#define BS_MCG_C8_CME1 (1U) /*!< Bit field size in bits for MCG_C8_CME1. */ + +/*! @brief Read current value of the MCG_C8_CME1 field. */ +#define BR_MCG_C8_CME1(x) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_CME1)) + +/*! @brief Format value for bitfield MCG_C8_CME1. */ +#define BF_MCG_C8_CME1(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C8_CME1) & BM_MCG_C8_CME1) + +/*! @brief Set the CME1 field to a new value. */ +#define BW_MCG_C8_CME1(x, v) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_CME1) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C8, field LOLRE[6] (RW) + * + * Determines if an interrupt or a reset request is made following a PLL loss of + * lock. + * + * Values: + * - 0 - Interrupt request is generated on a PLL loss of lock indication. The + * PLL loss of lock interrupt enable bit must also be set to generate the + * interrupt request. + * - 1 - Generate a reset request on a PLL loss of lock indication. + */ +/*@{*/ +#define BP_MCG_C8_LOLRE (6U) /*!< Bit position for MCG_C8_LOLRE. */ +#define BM_MCG_C8_LOLRE (0x40U) /*!< Bit mask for MCG_C8_LOLRE. */ +#define BS_MCG_C8_LOLRE (1U) /*!< Bit field size in bits for MCG_C8_LOLRE. */ + +/*! @brief Read current value of the MCG_C8_LOLRE field. */ +#define BR_MCG_C8_LOLRE(x) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOLRE)) + +/*! @brief Format value for bitfield MCG_C8_LOLRE. */ +#define BF_MCG_C8_LOLRE(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C8_LOLRE) & BM_MCG_C8_LOLRE) + +/*! @brief Set the LOLRE field to a new value. */ +#define BW_MCG_C8_LOLRE(x, v) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOLRE) = (v)) +/*@}*/ + +/*! + * @name Register MCG_C8, field LOCRE1[7] (RW) + * + * Determines if a interrupt or a reset request is made following a loss of RTC + * external reference clock. The LOCRE1 only has an affect when CME1 is set. + * + * Values: + * - 0 - Interrupt request is generated on a loss of RTC external reference + * clock. + * - 1 - Generate a reset request on a loss of RTC external reference clock + */ +/*@{*/ +#define BP_MCG_C8_LOCRE1 (7U) /*!< Bit position for MCG_C8_LOCRE1. */ +#define BM_MCG_C8_LOCRE1 (0x80U) /*!< Bit mask for MCG_C8_LOCRE1. */ +#define BS_MCG_C8_LOCRE1 (1U) /*!< Bit field size in bits for MCG_C8_LOCRE1. */ + +/*! @brief Read current value of the MCG_C8_LOCRE1 field. */ +#define BR_MCG_C8_LOCRE1(x) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOCRE1)) + +/*! @brief Format value for bitfield MCG_C8_LOCRE1. */ +#define BF_MCG_C8_LOCRE1(v) ((uint8_t)((uint8_t)(v) << BP_MCG_C8_LOCRE1) & BM_MCG_C8_LOCRE1) + +/*! @brief Set the LOCRE1 field to a new value. */ +#define BW_MCG_C8_LOCRE1(x, v) (BITBAND_ACCESS8(HW_MCG_C8_ADDR(x), BP_MCG_C8_LOCRE1) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_mcg_t - module struct + ******************************************************************************/ +/*! + * @brief All MCG module registers. + */ +#pragma pack(1) +typedef struct _hw_mcg +{ + __IO hw_mcg_c1_t C1; /*!< [0x0] MCG Control 1 Register */ + __IO hw_mcg_c2_t C2; /*!< [0x1] MCG Control 2 Register */ + __IO hw_mcg_c3_t C3; /*!< [0x2] MCG Control 3 Register */ + __IO hw_mcg_c4_t C4; /*!< [0x3] MCG Control 4 Register */ + __IO hw_mcg_c5_t C5; /*!< [0x4] MCG Control 5 Register */ + __IO hw_mcg_c6_t C6; /*!< [0x5] MCG Control 6 Register */ + __IO hw_mcg_s_t S; /*!< [0x6] MCG Status Register */ + uint8_t _reserved0[1]; + __IO hw_mcg_sc_t SC; /*!< [0x8] MCG Status and Control Register */ + uint8_t _reserved1[1]; + __IO hw_mcg_atcvh_t ATCVH; /*!< [0xA] MCG Auto Trim Compare Value High Register */ + __IO hw_mcg_atcvl_t ATCVL; /*!< [0xB] MCG Auto Trim Compare Value Low Register */ + __IO hw_mcg_c7_t C7; /*!< [0xC] MCG Control 7 Register */ + __IO hw_mcg_c8_t C8; /*!< [0xD] MCG Control 8 Register */ +} hw_mcg_t; +#pragma pack() + +/*! @brief Macro to access all MCG registers. */ +/*! @param x MCG module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_MCG(MCG_BASE)</code>. */ +#define HW_MCG(x) (*(hw_mcg_t *)(x)) + +#endif /* __HW_MCG_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcm.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcm.h new file mode 100644 index 0000000000..c32804d007 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_mcm.h @@ -0,0 +1,713 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_MCM_REGISTERS_H__ +#define __HW_MCM_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 MCM + * + * Core Platform Miscellaneous Control Module + * + * Registers defined in this header file: + * - HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration + * - HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration + * - HW_MCM_PLACR - Crossbar Switch (AXBS) Control Register + * - HW_MCM_ISCR - Interrupt Status and Control Register + * - HW_MCM_CPO - Compute Operation Control Register + * + * - hw_mcm_t - Struct containing all module registers. + */ + +#define HW_MCM_INSTANCE_COUNT (1U) /*!< Number of instances of the MCM module. */ + +/******************************************************************************* + * HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration + ******************************************************************************/ + +/*! + * @brief HW_MCM_PLASC - Crossbar Switch (AXBS) Slave Configuration (RO) + * + * Reset value: 0x001FU + * + * PLASC is a 16-bit read-only register identifying the presence/absence of bus + * slave connections to the device's crossbar switch. + */ +typedef union _hw_mcm_plasc +{ + uint16_t U; + struct _hw_mcm_plasc_bitfields + { + uint16_t ASC : 8; /*!< [7:0] Each bit in the ASC field indicates + * whether there is a corresponding connection to the crossbar switch's slave + * input port. */ + uint16_t RESERVED0 : 8; /*!< [15:8] */ + } B; +} hw_mcm_plasc_t; + +/*! + * @name Constants and macros for entire MCM_PLASC register + */ +/*@{*/ +#define HW_MCM_PLASC_ADDR(x) ((x) + 0x8U) + +#define HW_MCM_PLASC(x) (*(__I hw_mcm_plasc_t *) HW_MCM_PLASC_ADDR(x)) +#define HW_MCM_PLASC_RD(x) (HW_MCM_PLASC(x).U) +/*@}*/ + +/* + * Constants & macros for individual MCM_PLASC bitfields + */ + +/*! + * @name Register MCM_PLASC, field ASC[7:0] (RO) + * + * Values: + * - 0 - A bus slave connection to AXBS input port n is absent + * - 1 - A bus slave connection to AXBS input port n is present + */ +/*@{*/ +#define BP_MCM_PLASC_ASC (0U) /*!< Bit position for MCM_PLASC_ASC. */ +#define BM_MCM_PLASC_ASC (0x00FFU) /*!< Bit mask for MCM_PLASC_ASC. */ +#define BS_MCM_PLASC_ASC (8U) /*!< Bit field size in bits for MCM_PLASC_ASC. */ + +/*! @brief Read current value of the MCM_PLASC_ASC field. */ +#define BR_MCM_PLASC_ASC(x) (HW_MCM_PLASC(x).B.ASC) +/*@}*/ + +/******************************************************************************* + * HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration + ******************************************************************************/ + +/*! + * @brief HW_MCM_PLAMC - Crossbar Switch (AXBS) Master Configuration (RO) + * + * Reset value: 0x0017U + * + * PLAMC is a 16-bit read-only register identifying the presence/absence of bus + * master connections to the device's crossbar switch. + */ +typedef union _hw_mcm_plamc +{ + uint16_t U; + struct _hw_mcm_plamc_bitfields + { + uint16_t AMC : 8; /*!< [7:0] Each bit in the AMC field indicates + * whether there is a corresponding connection to the AXBS master input port. */ + uint16_t RESERVED0 : 8; /*!< [15:8] */ + } B; +} hw_mcm_plamc_t; + +/*! + * @name Constants and macros for entire MCM_PLAMC register + */ +/*@{*/ +#define HW_MCM_PLAMC_ADDR(x) ((x) + 0xAU) + +#define HW_MCM_PLAMC(x) (*(__I hw_mcm_plamc_t *) HW_MCM_PLAMC_ADDR(x)) +#define HW_MCM_PLAMC_RD(x) (HW_MCM_PLAMC(x).U) +/*@}*/ + +/* + * Constants & macros for individual MCM_PLAMC bitfields + */ + +/*! + * @name Register MCM_PLAMC, field AMC[7:0] (RO) + * + * Values: + * - 0 - A bus master connection to AXBS input port n is absent + * - 1 - A bus master connection to AXBS input port n is present + */ +/*@{*/ +#define BP_MCM_PLAMC_AMC (0U) /*!< Bit position for MCM_PLAMC_AMC. */ +#define BM_MCM_PLAMC_AMC (0x00FFU) /*!< Bit mask for MCM_PLAMC_AMC. */ +#define BS_MCM_PLAMC_AMC (8U) /*!< Bit field size in bits for MCM_PLAMC_AMC. */ + +/*! @brief Read current value of the MCM_PLAMC_AMC field. */ +#define BR_MCM_PLAMC_AMC(x) (HW_MCM_PLAMC(x).B.AMC) +/*@}*/ + +/******************************************************************************* + * HW_MCM_PLACR - Crossbar Switch (AXBS) Control Register + ******************************************************************************/ + +/*! + * @brief HW_MCM_PLACR - Crossbar Switch (AXBS) Control Register (RW) + * + * Reset value: 0x00000000U + * + * The PLACR register selects the arbitration policy for the crossbar masters. + */ +typedef union _hw_mcm_placr +{ + uint32_t U; + struct _hw_mcm_placr_bitfields + { + uint32_t RESERVED0 : 9; /*!< [8:0] */ + uint32_t ARB : 1; /*!< [9] Arbitration select */ + uint32_t RESERVED1 : 22; /*!< [31:10] */ + } B; +} hw_mcm_placr_t; + +/*! + * @name Constants and macros for entire MCM_PLACR register + */ +/*@{*/ +#define HW_MCM_PLACR_ADDR(x) ((x) + 0xCU) + +#define HW_MCM_PLACR(x) (*(__IO hw_mcm_placr_t *) HW_MCM_PLACR_ADDR(x)) +#define HW_MCM_PLACR_RD(x) (HW_MCM_PLACR(x).U) +#define HW_MCM_PLACR_WR(x, v) (HW_MCM_PLACR(x).U = (v)) +#define HW_MCM_PLACR_SET(x, v) (HW_MCM_PLACR_WR(x, HW_MCM_PLACR_RD(x) | (v))) +#define HW_MCM_PLACR_CLR(x, v) (HW_MCM_PLACR_WR(x, HW_MCM_PLACR_RD(x) & ~(v))) +#define HW_MCM_PLACR_TOG(x, v) (HW_MCM_PLACR_WR(x, HW_MCM_PLACR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCM_PLACR bitfields + */ + +/*! + * @name Register MCM_PLACR, field ARB[9] (RW) + * + * Values: + * - 0 - Fixed-priority arbitration for the crossbar masters + * - 1 - Round-robin arbitration for the crossbar masters + */ +/*@{*/ +#define BP_MCM_PLACR_ARB (9U) /*!< Bit position for MCM_PLACR_ARB. */ +#define BM_MCM_PLACR_ARB (0x00000200U) /*!< Bit mask for MCM_PLACR_ARB. */ +#define BS_MCM_PLACR_ARB (1U) /*!< Bit field size in bits for MCM_PLACR_ARB. */ + +/*! @brief Read current value of the MCM_PLACR_ARB field. */ +#define BR_MCM_PLACR_ARB(x) (HW_MCM_PLACR(x).B.ARB) + +/*! @brief Format value for bitfield MCM_PLACR_ARB. */ +#define BF_MCM_PLACR_ARB(v) ((uint32_t)((uint32_t)(v) << BP_MCM_PLACR_ARB) & BM_MCM_PLACR_ARB) + +/*! @brief Set the ARB field to a new value. */ +#define BW_MCM_PLACR_ARB(x, v) (HW_MCM_PLACR_WR(x, (HW_MCM_PLACR_RD(x) & ~BM_MCM_PLACR_ARB) | BF_MCM_PLACR_ARB(v))) +/*@}*/ + +/******************************************************************************* + * HW_MCM_ISCR - Interrupt Status and Control Register + ******************************************************************************/ + +/*! + * @brief HW_MCM_ISCR - Interrupt Status and Control Register (RW) + * + * Reset value: 0x00020000U + * + * The MCM_ISCR register includes the enable and status bits associated with the + * core's floating-point exceptions. The individual event indicators are first + * qualified with their exception enables and then logically summed to form an + * interrupt request sent to the core's NVIC. Bits 15-8 are read-only indicator + * flags based on the processor's FPSCR register. Attempted writes to these bits are + * ignored. Once set, the flags remain asserted until software clears the + * corresponding FPSCR bit. + */ +typedef union _hw_mcm_iscr +{ + uint32_t U; + struct _hw_mcm_iscr_bitfields + { + uint32_t RESERVED0 : 8; /*!< [7:0] */ + uint32_t FIOC : 1; /*!< [8] FPU invalid operation interrupt status */ + uint32_t FDZC : 1; /*!< [9] FPU divide-by-zero interrupt status */ + uint32_t FOFC : 1; /*!< [10] FPU overflow interrupt status */ + uint32_t FUFC : 1; /*!< [11] FPU underflow interrupt status */ + uint32_t FIXC : 1; /*!< [12] FPU inexact interrupt status */ + uint32_t RESERVED1 : 2; /*!< [14:13] */ + uint32_t FIDC : 1; /*!< [15] FPU input denormal interrupt status */ + uint32_t RESERVED2 : 8; /*!< [23:16] */ + uint32_t FIOCE : 1; /*!< [24] FPU invalid operation interrupt enable + * */ + uint32_t FDZCE : 1; /*!< [25] FPU divide-by-zero interrupt enable */ + uint32_t FOFCE : 1; /*!< [26] FPU overflow interrupt enable */ + uint32_t FUFCE : 1; /*!< [27] FPU underflow interrupt enable */ + uint32_t FIXCE : 1; /*!< [28] FPU inexact interrupt enable */ + uint32_t RESERVED3 : 2; /*!< [30:29] */ + uint32_t FIDCE : 1; /*!< [31] FPU input denormal interrupt enable */ + } B; +} hw_mcm_iscr_t; + +/*! + * @name Constants and macros for entire MCM_ISCR register + */ +/*@{*/ +#define HW_MCM_ISCR_ADDR(x) ((x) + 0x10U) + +#define HW_MCM_ISCR(x) (*(__IO hw_mcm_iscr_t *) HW_MCM_ISCR_ADDR(x)) +#define HW_MCM_ISCR_RD(x) (HW_MCM_ISCR(x).U) +#define HW_MCM_ISCR_WR(x, v) (HW_MCM_ISCR(x).U = (v)) +#define HW_MCM_ISCR_SET(x, v) (HW_MCM_ISCR_WR(x, HW_MCM_ISCR_RD(x) | (v))) +#define HW_MCM_ISCR_CLR(x, v) (HW_MCM_ISCR_WR(x, HW_MCM_ISCR_RD(x) & ~(v))) +#define HW_MCM_ISCR_TOG(x, v) (HW_MCM_ISCR_WR(x, HW_MCM_ISCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCM_ISCR bitfields + */ + +/*! + * @name Register MCM_ISCR, field FIOC[8] (RO) + * + * This read-only bit is a copy of the core's FPSCR[IOC] bit and signals an + * illegal operation has been detected in the processor's FPU. Once set, this bit + * remains set until software clears the FPSCR[IOC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FIOC (8U) /*!< Bit position for MCM_ISCR_FIOC. */ +#define BM_MCM_ISCR_FIOC (0x00000100U) /*!< Bit mask for MCM_ISCR_FIOC. */ +#define BS_MCM_ISCR_FIOC (1U) /*!< Bit field size in bits for MCM_ISCR_FIOC. */ + +/*! @brief Read current value of the MCM_ISCR_FIOC field. */ +#define BR_MCM_ISCR_FIOC(x) (HW_MCM_ISCR(x).B.FIOC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FDZC[9] (RO) + * + * This read-only bit is a copy of the core's FPSCR[DZC] bit and signals a + * divide by zero has been detected in the processor's FPU. Once set, this bit remains + * set until software clears the FPSCR[DZC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FDZC (9U) /*!< Bit position for MCM_ISCR_FDZC. */ +#define BM_MCM_ISCR_FDZC (0x00000200U) /*!< Bit mask for MCM_ISCR_FDZC. */ +#define BS_MCM_ISCR_FDZC (1U) /*!< Bit field size in bits for MCM_ISCR_FDZC. */ + +/*! @brief Read current value of the MCM_ISCR_FDZC field. */ +#define BR_MCM_ISCR_FDZC(x) (HW_MCM_ISCR(x).B.FDZC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FOFC[10] (RO) + * + * This read-only bit is a copy of the core's FPSCR[OFC] bit and signals an + * overflow has been detected in the processor's FPU. Once set, this bit remains set + * until software clears the FPSCR[OFC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FOFC (10U) /*!< Bit position for MCM_ISCR_FOFC. */ +#define BM_MCM_ISCR_FOFC (0x00000400U) /*!< Bit mask for MCM_ISCR_FOFC. */ +#define BS_MCM_ISCR_FOFC (1U) /*!< Bit field size in bits for MCM_ISCR_FOFC. */ + +/*! @brief Read current value of the MCM_ISCR_FOFC field. */ +#define BR_MCM_ISCR_FOFC(x) (HW_MCM_ISCR(x).B.FOFC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FUFC[11] (RO) + * + * This read-only bit is a copy of the core's FPSCR[UFC] bit and signals an + * underflow has been detected in the processor's FPU. Once set, this bit remains set + * until software clears the FPSCR[UFC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FUFC (11U) /*!< Bit position for MCM_ISCR_FUFC. */ +#define BM_MCM_ISCR_FUFC (0x00000800U) /*!< Bit mask for MCM_ISCR_FUFC. */ +#define BS_MCM_ISCR_FUFC (1U) /*!< Bit field size in bits for MCM_ISCR_FUFC. */ + +/*! @brief Read current value of the MCM_ISCR_FUFC field. */ +#define BR_MCM_ISCR_FUFC(x) (HW_MCM_ISCR(x).B.FUFC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FIXC[12] (RO) + * + * This read-only bit is a copy of the core's FPSCR[IXC] bit and signals an + * inexact number has been detected in the processor's FPU. Once set, this bit + * remains set until software clears the FPSCR[IXC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FIXC (12U) /*!< Bit position for MCM_ISCR_FIXC. */ +#define BM_MCM_ISCR_FIXC (0x00001000U) /*!< Bit mask for MCM_ISCR_FIXC. */ +#define BS_MCM_ISCR_FIXC (1U) /*!< Bit field size in bits for MCM_ISCR_FIXC. */ + +/*! @brief Read current value of the MCM_ISCR_FIXC field. */ +#define BR_MCM_ISCR_FIXC(x) (HW_MCM_ISCR(x).B.FIXC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FIDC[15] (RO) + * + * This read-only bit is a copy of the core's FPSCR[IDC] bit and signals input + * denormalized number has been detected in the processor's FPU. Once set, this + * bit remains set until software clears the FPSCR[IDC] bit. + * + * Values: + * - 0 - No interrupt + * - 1 - Interrupt occurred + */ +/*@{*/ +#define BP_MCM_ISCR_FIDC (15U) /*!< Bit position for MCM_ISCR_FIDC. */ +#define BM_MCM_ISCR_FIDC (0x00008000U) /*!< Bit mask for MCM_ISCR_FIDC. */ +#define BS_MCM_ISCR_FIDC (1U) /*!< Bit field size in bits for MCM_ISCR_FIDC. */ + +/*! @brief Read current value of the MCM_ISCR_FIDC field. */ +#define BR_MCM_ISCR_FIDC(x) (HW_MCM_ISCR(x).B.FIDC) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FIOCE[24] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FIOCE (24U) /*!< Bit position for MCM_ISCR_FIOCE. */ +#define BM_MCM_ISCR_FIOCE (0x01000000U) /*!< Bit mask for MCM_ISCR_FIOCE. */ +#define BS_MCM_ISCR_FIOCE (1U) /*!< Bit field size in bits for MCM_ISCR_FIOCE. */ + +/*! @brief Read current value of the MCM_ISCR_FIOCE field. */ +#define BR_MCM_ISCR_FIOCE(x) (HW_MCM_ISCR(x).B.FIOCE) + +/*! @brief Format value for bitfield MCM_ISCR_FIOCE. */ +#define BF_MCM_ISCR_FIOCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FIOCE) & BM_MCM_ISCR_FIOCE) + +/*! @brief Set the FIOCE field to a new value. */ +#define BW_MCM_ISCR_FIOCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FIOCE) | BF_MCM_ISCR_FIOCE(v))) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FDZCE[25] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FDZCE (25U) /*!< Bit position for MCM_ISCR_FDZCE. */ +#define BM_MCM_ISCR_FDZCE (0x02000000U) /*!< Bit mask for MCM_ISCR_FDZCE. */ +#define BS_MCM_ISCR_FDZCE (1U) /*!< Bit field size in bits for MCM_ISCR_FDZCE. */ + +/*! @brief Read current value of the MCM_ISCR_FDZCE field. */ +#define BR_MCM_ISCR_FDZCE(x) (HW_MCM_ISCR(x).B.FDZCE) + +/*! @brief Format value for bitfield MCM_ISCR_FDZCE. */ +#define BF_MCM_ISCR_FDZCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FDZCE) & BM_MCM_ISCR_FDZCE) + +/*! @brief Set the FDZCE field to a new value. */ +#define BW_MCM_ISCR_FDZCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FDZCE) | BF_MCM_ISCR_FDZCE(v))) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FOFCE[26] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FOFCE (26U) /*!< Bit position for MCM_ISCR_FOFCE. */ +#define BM_MCM_ISCR_FOFCE (0x04000000U) /*!< Bit mask for MCM_ISCR_FOFCE. */ +#define BS_MCM_ISCR_FOFCE (1U) /*!< Bit field size in bits for MCM_ISCR_FOFCE. */ + +/*! @brief Read current value of the MCM_ISCR_FOFCE field. */ +#define BR_MCM_ISCR_FOFCE(x) (HW_MCM_ISCR(x).B.FOFCE) + +/*! @brief Format value for bitfield MCM_ISCR_FOFCE. */ +#define BF_MCM_ISCR_FOFCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FOFCE) & BM_MCM_ISCR_FOFCE) + +/*! @brief Set the FOFCE field to a new value. */ +#define BW_MCM_ISCR_FOFCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FOFCE) | BF_MCM_ISCR_FOFCE(v))) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FUFCE[27] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FUFCE (27U) /*!< Bit position for MCM_ISCR_FUFCE. */ +#define BM_MCM_ISCR_FUFCE (0x08000000U) /*!< Bit mask for MCM_ISCR_FUFCE. */ +#define BS_MCM_ISCR_FUFCE (1U) /*!< Bit field size in bits for MCM_ISCR_FUFCE. */ + +/*! @brief Read current value of the MCM_ISCR_FUFCE field. */ +#define BR_MCM_ISCR_FUFCE(x) (HW_MCM_ISCR(x).B.FUFCE) + +/*! @brief Format value for bitfield MCM_ISCR_FUFCE. */ +#define BF_MCM_ISCR_FUFCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FUFCE) & BM_MCM_ISCR_FUFCE) + +/*! @brief Set the FUFCE field to a new value. */ +#define BW_MCM_ISCR_FUFCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FUFCE) | BF_MCM_ISCR_FUFCE(v))) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FIXCE[28] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FIXCE (28U) /*!< Bit position for MCM_ISCR_FIXCE. */ +#define BM_MCM_ISCR_FIXCE (0x10000000U) /*!< Bit mask for MCM_ISCR_FIXCE. */ +#define BS_MCM_ISCR_FIXCE (1U) /*!< Bit field size in bits for MCM_ISCR_FIXCE. */ + +/*! @brief Read current value of the MCM_ISCR_FIXCE field. */ +#define BR_MCM_ISCR_FIXCE(x) (HW_MCM_ISCR(x).B.FIXCE) + +/*! @brief Format value for bitfield MCM_ISCR_FIXCE. */ +#define BF_MCM_ISCR_FIXCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FIXCE) & BM_MCM_ISCR_FIXCE) + +/*! @brief Set the FIXCE field to a new value. */ +#define BW_MCM_ISCR_FIXCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FIXCE) | BF_MCM_ISCR_FIXCE(v))) +/*@}*/ + +/*! + * @name Register MCM_ISCR, field FIDCE[31] (RW) + * + * Values: + * - 0 - Disable interrupt + * - 1 - Enable interrupt + */ +/*@{*/ +#define BP_MCM_ISCR_FIDCE (31U) /*!< Bit position for MCM_ISCR_FIDCE. */ +#define BM_MCM_ISCR_FIDCE (0x80000000U) /*!< Bit mask for MCM_ISCR_FIDCE. */ +#define BS_MCM_ISCR_FIDCE (1U) /*!< Bit field size in bits for MCM_ISCR_FIDCE. */ + +/*! @brief Read current value of the MCM_ISCR_FIDCE field. */ +#define BR_MCM_ISCR_FIDCE(x) (HW_MCM_ISCR(x).B.FIDCE) + +/*! @brief Format value for bitfield MCM_ISCR_FIDCE. */ +#define BF_MCM_ISCR_FIDCE(v) ((uint32_t)((uint32_t)(v) << BP_MCM_ISCR_FIDCE) & BM_MCM_ISCR_FIDCE) + +/*! @brief Set the FIDCE field to a new value. */ +#define BW_MCM_ISCR_FIDCE(x, v) (HW_MCM_ISCR_WR(x, (HW_MCM_ISCR_RD(x) & ~BM_MCM_ISCR_FIDCE) | BF_MCM_ISCR_FIDCE(v))) +/*@}*/ + +/******************************************************************************* + * HW_MCM_CPO - Compute Operation Control Register + ******************************************************************************/ + +/*! + * @brief HW_MCM_CPO - Compute Operation Control Register (RW) + * + * Reset value: 0x00000000U + * + * This register controls the Compute Operation. + */ +typedef union _hw_mcm_cpo +{ + uint32_t U; + struct _hw_mcm_cpo_bitfields + { + uint32_t CPOREQ : 1; /*!< [0] Compute Operation request */ + uint32_t CPOACK : 1; /*!< [1] Compute Operation acknowledge */ + uint32_t CPOWOI : 1; /*!< [2] Compute Operation wakeup on interrupt */ + uint32_t RESERVED0 : 29; /*!< [31:3] */ + } B; +} hw_mcm_cpo_t; + +/*! + * @name Constants and macros for entire MCM_CPO register + */ +/*@{*/ +#define HW_MCM_CPO_ADDR(x) ((x) + 0x40U) + +#define HW_MCM_CPO(x) (*(__IO hw_mcm_cpo_t *) HW_MCM_CPO_ADDR(x)) +#define HW_MCM_CPO_RD(x) (HW_MCM_CPO(x).U) +#define HW_MCM_CPO_WR(x, v) (HW_MCM_CPO(x).U = (v)) +#define HW_MCM_CPO_SET(x, v) (HW_MCM_CPO_WR(x, HW_MCM_CPO_RD(x) | (v))) +#define HW_MCM_CPO_CLR(x, v) (HW_MCM_CPO_WR(x, HW_MCM_CPO_RD(x) & ~(v))) +#define HW_MCM_CPO_TOG(x, v) (HW_MCM_CPO_WR(x, HW_MCM_CPO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual MCM_CPO bitfields + */ + +/*! + * @name Register MCM_CPO, field CPOREQ[0] (RW) + * + * This bit is auto-cleared by vector fetching if CPOWOI = 1. + * + * Values: + * - 0 - Request is cleared. + * - 1 - Request Compute Operation. + */ +/*@{*/ +#define BP_MCM_CPO_CPOREQ (0U) /*!< Bit position for MCM_CPO_CPOREQ. */ +#define BM_MCM_CPO_CPOREQ (0x00000001U) /*!< Bit mask for MCM_CPO_CPOREQ. */ +#define BS_MCM_CPO_CPOREQ (1U) /*!< Bit field size in bits for MCM_CPO_CPOREQ. */ + +/*! @brief Read current value of the MCM_CPO_CPOREQ field. */ +#define BR_MCM_CPO_CPOREQ(x) (HW_MCM_CPO(x).B.CPOREQ) + +/*! @brief Format value for bitfield MCM_CPO_CPOREQ. */ +#define BF_MCM_CPO_CPOREQ(v) ((uint32_t)((uint32_t)(v) << BP_MCM_CPO_CPOREQ) & BM_MCM_CPO_CPOREQ) + +/*! @brief Set the CPOREQ field to a new value. */ +#define BW_MCM_CPO_CPOREQ(x, v) (HW_MCM_CPO_WR(x, (HW_MCM_CPO_RD(x) & ~BM_MCM_CPO_CPOREQ) | BF_MCM_CPO_CPOREQ(v))) +/*@}*/ + +/*! + * @name Register MCM_CPO, field CPOACK[1] (RO) + * + * Values: + * - 0 - Compute operation entry has not completed or compute operation exit has + * completed. + * - 1 - Compute operation entry has completed or compute operation exit has not + * completed. + */ +/*@{*/ +#define BP_MCM_CPO_CPOACK (1U) /*!< Bit position for MCM_CPO_CPOACK. */ +#define BM_MCM_CPO_CPOACK (0x00000002U) /*!< Bit mask for MCM_CPO_CPOACK. */ +#define BS_MCM_CPO_CPOACK (1U) /*!< Bit field size in bits for MCM_CPO_CPOACK. */ + +/*! @brief Read current value of the MCM_CPO_CPOACK field. */ +#define BR_MCM_CPO_CPOACK(x) (HW_MCM_CPO(x).B.CPOACK) +/*@}*/ + +/*! + * @name Register MCM_CPO, field CPOWOI[2] (RW) + * + * Values: + * - 0 - No effect. + * - 1 - When set, the CPOREQ is cleared on any interrupt or exception vector + * fetch. + */ +/*@{*/ +#define BP_MCM_CPO_CPOWOI (2U) /*!< Bit position for MCM_CPO_CPOWOI. */ +#define BM_MCM_CPO_CPOWOI (0x00000004U) /*!< Bit mask for MCM_CPO_CPOWOI. */ +#define BS_MCM_CPO_CPOWOI (1U) /*!< Bit field size in bits for MCM_CPO_CPOWOI. */ + +/*! @brief Read current value of the MCM_CPO_CPOWOI field. */ +#define BR_MCM_CPO_CPOWOI(x) (HW_MCM_CPO(x).B.CPOWOI) + +/*! @brief Format value for bitfield MCM_CPO_CPOWOI. */ +#define BF_MCM_CPO_CPOWOI(v) ((uint32_t)((uint32_t)(v) << BP_MCM_CPO_CPOWOI) & BM_MCM_CPO_CPOWOI) + +/*! @brief Set the CPOWOI field to a new value. */ +#define BW_MCM_CPO_CPOWOI(x, v) (HW_MCM_CPO_WR(x, (HW_MCM_CPO_RD(x) & ~BM_MCM_CPO_CPOWOI) | BF_MCM_CPO_CPOWOI(v))) +/*@}*/ + +/******************************************************************************* + * hw_mcm_t - module struct + ******************************************************************************/ +/*! + * @brief All MCM module registers. + */ +#pragma pack(1) +typedef struct _hw_mcm +{ + uint8_t _reserved0[8]; + __I hw_mcm_plasc_t PLASC; /*!< [0x8] Crossbar Switch (AXBS) Slave Configuration */ + __I hw_mcm_plamc_t PLAMC; /*!< [0xA] Crossbar Switch (AXBS) Master Configuration */ + __IO hw_mcm_placr_t PLACR; /*!< [0xC] Crossbar Switch (AXBS) Control Register */ + __IO hw_mcm_iscr_t ISCR; /*!< [0x10] Interrupt Status and Control Register */ + uint8_t _reserved1[44]; + __IO hw_mcm_cpo_t CPO; /*!< [0x40] Compute Operation Control Register */ +} hw_mcm_t; +#pragma pack() + +/*! @brief Macro to access all MCM registers. */ +/*! @param x MCM module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_MCM(MCM_BASE)</code>. */ +#define HW_MCM(x) (*(hw_mcm_t *)(x)) + +#endif /* __HW_MCM_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_nv.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_nv.h new file mode 100644 index 0000000000..579cb56375 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_nv.h @@ -0,0 +1,869 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_NV_REGISTERS_H__ +#define __HW_NV_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 NV + * + * Flash configuration field + * + * Registers defined in this header file: + * - HW_NV_BACKKEY3 - Backdoor Comparison Key 3. + * - HW_NV_BACKKEY2 - Backdoor Comparison Key 2. + * - HW_NV_BACKKEY1 - Backdoor Comparison Key 1. + * - HW_NV_BACKKEY0 - Backdoor Comparison Key 0. + * - HW_NV_BACKKEY7 - Backdoor Comparison Key 7. + * - HW_NV_BACKKEY6 - Backdoor Comparison Key 6. + * - HW_NV_BACKKEY5 - Backdoor Comparison Key 5. + * - HW_NV_BACKKEY4 - Backdoor Comparison Key 4. + * - HW_NV_FPROT3 - Non-volatile P-Flash Protection 1 - Low Register + * - HW_NV_FPROT2 - Non-volatile P-Flash Protection 1 - High Register + * - HW_NV_FPROT1 - Non-volatile P-Flash Protection 0 - Low Register + * - HW_NV_FPROT0 - Non-volatile P-Flash Protection 0 - High Register + * - HW_NV_FSEC - Non-volatile Flash Security Register + * - HW_NV_FOPT - Non-volatile Flash Option Register + * + * - hw_nv_t - Struct containing all module registers. + */ + +#define HW_NV_INSTANCE_COUNT (1U) /*!< Number of instances of the NV module. */ + +/******************************************************************************* + * HW_NV_BACKKEY3 - Backdoor Comparison Key 3. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY3 - Backdoor Comparison Key 3. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey3 +{ + uint8_t U; + struct _hw_nv_backkey3_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey3_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY3 register + */ +/*@{*/ +#define HW_NV_BACKKEY3_ADDR(x) ((x) + 0x0U) + +#define HW_NV_BACKKEY3(x) (*(__I hw_nv_backkey3_t *) HW_NV_BACKKEY3_ADDR(x)) +#define HW_NV_BACKKEY3_RD(x) (HW_NV_BACKKEY3(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY3 bitfields + */ + +/*! + * @name Register NV_BACKKEY3, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY3_KEY (0U) /*!< Bit position for NV_BACKKEY3_KEY. */ +#define BM_NV_BACKKEY3_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY3_KEY. */ +#define BS_NV_BACKKEY3_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY3_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY3_KEY field. */ +#define BR_NV_BACKKEY3_KEY(x) (HW_NV_BACKKEY3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY2 - Backdoor Comparison Key 2. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY2 - Backdoor Comparison Key 2. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey2 +{ + uint8_t U; + struct _hw_nv_backkey2_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey2_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY2 register + */ +/*@{*/ +#define HW_NV_BACKKEY2_ADDR(x) ((x) + 0x1U) + +#define HW_NV_BACKKEY2(x) (*(__I hw_nv_backkey2_t *) HW_NV_BACKKEY2_ADDR(x)) +#define HW_NV_BACKKEY2_RD(x) (HW_NV_BACKKEY2(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY2 bitfields + */ + +/*! + * @name Register NV_BACKKEY2, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY2_KEY (0U) /*!< Bit position for NV_BACKKEY2_KEY. */ +#define BM_NV_BACKKEY2_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY2_KEY. */ +#define BS_NV_BACKKEY2_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY2_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY2_KEY field. */ +#define BR_NV_BACKKEY2_KEY(x) (HW_NV_BACKKEY2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY1 - Backdoor Comparison Key 1. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY1 - Backdoor Comparison Key 1. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey1 +{ + uint8_t U; + struct _hw_nv_backkey1_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey1_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY1 register + */ +/*@{*/ +#define HW_NV_BACKKEY1_ADDR(x) ((x) + 0x2U) + +#define HW_NV_BACKKEY1(x) (*(__I hw_nv_backkey1_t *) HW_NV_BACKKEY1_ADDR(x)) +#define HW_NV_BACKKEY1_RD(x) (HW_NV_BACKKEY1(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY1 bitfields + */ + +/*! + * @name Register NV_BACKKEY1, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY1_KEY (0U) /*!< Bit position for NV_BACKKEY1_KEY. */ +#define BM_NV_BACKKEY1_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY1_KEY. */ +#define BS_NV_BACKKEY1_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY1_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY1_KEY field. */ +#define BR_NV_BACKKEY1_KEY(x) (HW_NV_BACKKEY1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY0 - Backdoor Comparison Key 0. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY0 - Backdoor Comparison Key 0. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey0 +{ + uint8_t U; + struct _hw_nv_backkey0_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey0_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY0 register + */ +/*@{*/ +#define HW_NV_BACKKEY0_ADDR(x) ((x) + 0x3U) + +#define HW_NV_BACKKEY0(x) (*(__I hw_nv_backkey0_t *) HW_NV_BACKKEY0_ADDR(x)) +#define HW_NV_BACKKEY0_RD(x) (HW_NV_BACKKEY0(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY0 bitfields + */ + +/*! + * @name Register NV_BACKKEY0, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY0_KEY (0U) /*!< Bit position for NV_BACKKEY0_KEY. */ +#define BM_NV_BACKKEY0_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY0_KEY. */ +#define BS_NV_BACKKEY0_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY0_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY0_KEY field. */ +#define BR_NV_BACKKEY0_KEY(x) (HW_NV_BACKKEY0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY7 - Backdoor Comparison Key 7. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY7 - Backdoor Comparison Key 7. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey7 +{ + uint8_t U; + struct _hw_nv_backkey7_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey7_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY7 register + */ +/*@{*/ +#define HW_NV_BACKKEY7_ADDR(x) ((x) + 0x4U) + +#define HW_NV_BACKKEY7(x) (*(__I hw_nv_backkey7_t *) HW_NV_BACKKEY7_ADDR(x)) +#define HW_NV_BACKKEY7_RD(x) (HW_NV_BACKKEY7(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY7 bitfields + */ + +/*! + * @name Register NV_BACKKEY7, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY7_KEY (0U) /*!< Bit position for NV_BACKKEY7_KEY. */ +#define BM_NV_BACKKEY7_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY7_KEY. */ +#define BS_NV_BACKKEY7_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY7_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY7_KEY field. */ +#define BR_NV_BACKKEY7_KEY(x) (HW_NV_BACKKEY7(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY6 - Backdoor Comparison Key 6. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY6 - Backdoor Comparison Key 6. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey6 +{ + uint8_t U; + struct _hw_nv_backkey6_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey6_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY6 register + */ +/*@{*/ +#define HW_NV_BACKKEY6_ADDR(x) ((x) + 0x5U) + +#define HW_NV_BACKKEY6(x) (*(__I hw_nv_backkey6_t *) HW_NV_BACKKEY6_ADDR(x)) +#define HW_NV_BACKKEY6_RD(x) (HW_NV_BACKKEY6(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY6 bitfields + */ + +/*! + * @name Register NV_BACKKEY6, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY6_KEY (0U) /*!< Bit position for NV_BACKKEY6_KEY. */ +#define BM_NV_BACKKEY6_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY6_KEY. */ +#define BS_NV_BACKKEY6_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY6_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY6_KEY field. */ +#define BR_NV_BACKKEY6_KEY(x) (HW_NV_BACKKEY6(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY5 - Backdoor Comparison Key 5. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY5 - Backdoor Comparison Key 5. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey5 +{ + uint8_t U; + struct _hw_nv_backkey5_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey5_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY5 register + */ +/*@{*/ +#define HW_NV_BACKKEY5_ADDR(x) ((x) + 0x6U) + +#define HW_NV_BACKKEY5(x) (*(__I hw_nv_backkey5_t *) HW_NV_BACKKEY5_ADDR(x)) +#define HW_NV_BACKKEY5_RD(x) (HW_NV_BACKKEY5(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY5 bitfields + */ + +/*! + * @name Register NV_BACKKEY5, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY5_KEY (0U) /*!< Bit position for NV_BACKKEY5_KEY. */ +#define BM_NV_BACKKEY5_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY5_KEY. */ +#define BS_NV_BACKKEY5_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY5_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY5_KEY field. */ +#define BR_NV_BACKKEY5_KEY(x) (HW_NV_BACKKEY5(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_BACKKEY4 - Backdoor Comparison Key 4. + ******************************************************************************/ + +/*! + * @brief HW_NV_BACKKEY4 - Backdoor Comparison Key 4. (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_backkey4 +{ + uint8_t U; + struct _hw_nv_backkey4_bitfields + { + uint8_t KEY : 8; /*!< [7:0] Backdoor Comparison Key. */ + } B; +} hw_nv_backkey4_t; + +/*! + * @name Constants and macros for entire NV_BACKKEY4 register + */ +/*@{*/ +#define HW_NV_BACKKEY4_ADDR(x) ((x) + 0x7U) + +#define HW_NV_BACKKEY4(x) (*(__I hw_nv_backkey4_t *) HW_NV_BACKKEY4_ADDR(x)) +#define HW_NV_BACKKEY4_RD(x) (HW_NV_BACKKEY4(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_BACKKEY4 bitfields + */ + +/*! + * @name Register NV_BACKKEY4, field KEY[7:0] (RO) + */ +/*@{*/ +#define BP_NV_BACKKEY4_KEY (0U) /*!< Bit position for NV_BACKKEY4_KEY. */ +#define BM_NV_BACKKEY4_KEY (0xFFU) /*!< Bit mask for NV_BACKKEY4_KEY. */ +#define BS_NV_BACKKEY4_KEY (8U) /*!< Bit field size in bits for NV_BACKKEY4_KEY. */ + +/*! @brief Read current value of the NV_BACKKEY4_KEY field. */ +#define BR_NV_BACKKEY4_KEY(x) (HW_NV_BACKKEY4(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_FPROT3 - Non-volatile P-Flash Protection 1 - Low Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FPROT3 - Non-volatile P-Flash Protection 1 - Low Register (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_fprot3 +{ + uint8_t U; + struct _hw_nv_fprot3_bitfields + { + uint8_t PROT : 8; /*!< [7:0] P-Flash Region Protect */ + } B; +} hw_nv_fprot3_t; + +/*! + * @name Constants and macros for entire NV_FPROT3 register + */ +/*@{*/ +#define HW_NV_FPROT3_ADDR(x) ((x) + 0x8U) + +#define HW_NV_FPROT3(x) (*(__I hw_nv_fprot3_t *) HW_NV_FPROT3_ADDR(x)) +#define HW_NV_FPROT3_RD(x) (HW_NV_FPROT3(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FPROT3 bitfields + */ + +/*! + * @name Register NV_FPROT3, field PROT[7:0] (RO) + */ +/*@{*/ +#define BP_NV_FPROT3_PROT (0U) /*!< Bit position for NV_FPROT3_PROT. */ +#define BM_NV_FPROT3_PROT (0xFFU) /*!< Bit mask for NV_FPROT3_PROT. */ +#define BS_NV_FPROT3_PROT (8U) /*!< Bit field size in bits for NV_FPROT3_PROT. */ + +/*! @brief Read current value of the NV_FPROT3_PROT field. */ +#define BR_NV_FPROT3_PROT(x) (HW_NV_FPROT3(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_FPROT2 - Non-volatile P-Flash Protection 1 - High Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FPROT2 - Non-volatile P-Flash Protection 1 - High Register (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_fprot2 +{ + uint8_t U; + struct _hw_nv_fprot2_bitfields + { + uint8_t PROT : 8; /*!< [7:0] P-Flash Region Protect */ + } B; +} hw_nv_fprot2_t; + +/*! + * @name Constants and macros for entire NV_FPROT2 register + */ +/*@{*/ +#define HW_NV_FPROT2_ADDR(x) ((x) + 0x9U) + +#define HW_NV_FPROT2(x) (*(__I hw_nv_fprot2_t *) HW_NV_FPROT2_ADDR(x)) +#define HW_NV_FPROT2_RD(x) (HW_NV_FPROT2(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FPROT2 bitfields + */ + +/*! + * @name Register NV_FPROT2, field PROT[7:0] (RO) + */ +/*@{*/ +#define BP_NV_FPROT2_PROT (0U) /*!< Bit position for NV_FPROT2_PROT. */ +#define BM_NV_FPROT2_PROT (0xFFU) /*!< Bit mask for NV_FPROT2_PROT. */ +#define BS_NV_FPROT2_PROT (8U) /*!< Bit field size in bits for NV_FPROT2_PROT. */ + +/*! @brief Read current value of the NV_FPROT2_PROT field. */ +#define BR_NV_FPROT2_PROT(x) (HW_NV_FPROT2(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_FPROT1 - Non-volatile P-Flash Protection 0 - Low Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FPROT1 - Non-volatile P-Flash Protection 0 - Low Register (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_fprot1 +{ + uint8_t U; + struct _hw_nv_fprot1_bitfields + { + uint8_t PROT : 8; /*!< [7:0] P-Flash Region Protect */ + } B; +} hw_nv_fprot1_t; + +/*! + * @name Constants and macros for entire NV_FPROT1 register + */ +/*@{*/ +#define HW_NV_FPROT1_ADDR(x) ((x) + 0xAU) + +#define HW_NV_FPROT1(x) (*(__I hw_nv_fprot1_t *) HW_NV_FPROT1_ADDR(x)) +#define HW_NV_FPROT1_RD(x) (HW_NV_FPROT1(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FPROT1 bitfields + */ + +/*! + * @name Register NV_FPROT1, field PROT[7:0] (RO) + */ +/*@{*/ +#define BP_NV_FPROT1_PROT (0U) /*!< Bit position for NV_FPROT1_PROT. */ +#define BM_NV_FPROT1_PROT (0xFFU) /*!< Bit mask for NV_FPROT1_PROT. */ +#define BS_NV_FPROT1_PROT (8U) /*!< Bit field size in bits for NV_FPROT1_PROT. */ + +/*! @brief Read current value of the NV_FPROT1_PROT field. */ +#define BR_NV_FPROT1_PROT(x) (HW_NV_FPROT1(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_FPROT0 - Non-volatile P-Flash Protection 0 - High Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FPROT0 - Non-volatile P-Flash Protection 0 - High Register (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_fprot0 +{ + uint8_t U; + struct _hw_nv_fprot0_bitfields + { + uint8_t PROT : 8; /*!< [7:0] P-Flash Region Protect */ + } B; +} hw_nv_fprot0_t; + +/*! + * @name Constants and macros for entire NV_FPROT0 register + */ +/*@{*/ +#define HW_NV_FPROT0_ADDR(x) ((x) + 0xBU) + +#define HW_NV_FPROT0(x) (*(__I hw_nv_fprot0_t *) HW_NV_FPROT0_ADDR(x)) +#define HW_NV_FPROT0_RD(x) (HW_NV_FPROT0(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FPROT0 bitfields + */ + +/*! + * @name Register NV_FPROT0, field PROT[7:0] (RO) + */ +/*@{*/ +#define BP_NV_FPROT0_PROT (0U) /*!< Bit position for NV_FPROT0_PROT. */ +#define BM_NV_FPROT0_PROT (0xFFU) /*!< Bit mask for NV_FPROT0_PROT. */ +#define BS_NV_FPROT0_PROT (8U) /*!< Bit field size in bits for NV_FPROT0_PROT. */ + +/*! @brief Read current value of the NV_FPROT0_PROT field. */ +#define BR_NV_FPROT0_PROT(x) (HW_NV_FPROT0(x).U) +/*@}*/ + +/******************************************************************************* + * HW_NV_FSEC - Non-volatile Flash Security Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FSEC - Non-volatile Flash Security Register (RO) + * + * Reset value: 0xFFU + * + * Allows the user to customize the operation of the MCU at boot time + */ +typedef union _hw_nv_fsec +{ + uint8_t U; + struct _hw_nv_fsec_bitfields + { + uint8_t SEC : 2; /*!< [1:0] Flash Security */ + uint8_t FSLACC : 2; /*!< [3:2] Freescale Failure Analysis Access Code + * */ + uint8_t MEEN : 2; /*!< [5:4] */ + uint8_t KEYEN : 2; /*!< [7:6] Backdoor Key Security Enable */ + } B; +} hw_nv_fsec_t; + +/*! + * @name Constants and macros for entire NV_FSEC register + */ +/*@{*/ +#define HW_NV_FSEC_ADDR(x) ((x) + 0xCU) + +#define HW_NV_FSEC(x) (*(__I hw_nv_fsec_t *) HW_NV_FSEC_ADDR(x)) +#define HW_NV_FSEC_RD(x) (HW_NV_FSEC(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FSEC bitfields + */ + +/*! + * @name Register NV_FSEC, field SEC[1:0] (RO) + * + * Values: + * - 10 - MCU security status is unsecure + * - 11 - MCU security status is secure + */ +/*@{*/ +#define BP_NV_FSEC_SEC (0U) /*!< Bit position for NV_FSEC_SEC. */ +#define BM_NV_FSEC_SEC (0x03U) /*!< Bit mask for NV_FSEC_SEC. */ +#define BS_NV_FSEC_SEC (2U) /*!< Bit field size in bits for NV_FSEC_SEC. */ + +/*! @brief Read current value of the NV_FSEC_SEC field. */ +#define BR_NV_FSEC_SEC(x) (HW_NV_FSEC(x).B.SEC) +/*@}*/ + +/*! + * @name Register NV_FSEC, field FSLACC[3:2] (RO) + * + * Values: + * - 10 - Freescale factory access denied + * - 11 - Freescale factory access granted + */ +/*@{*/ +#define BP_NV_FSEC_FSLACC (2U) /*!< Bit position for NV_FSEC_FSLACC. */ +#define BM_NV_FSEC_FSLACC (0x0CU) /*!< Bit mask for NV_FSEC_FSLACC. */ +#define BS_NV_FSEC_FSLACC (2U) /*!< Bit field size in bits for NV_FSEC_FSLACC. */ + +/*! @brief Read current value of the NV_FSEC_FSLACC field. */ +#define BR_NV_FSEC_FSLACC(x) (HW_NV_FSEC(x).B.FSLACC) +/*@}*/ + +/*! + * @name Register NV_FSEC, field MEEN[5:4] (RO) + * + * Values: + * - 10 - Mass erase is disabled + * - 11 - Mass erase is enabled + */ +/*@{*/ +#define BP_NV_FSEC_MEEN (4U) /*!< Bit position for NV_FSEC_MEEN. */ +#define BM_NV_FSEC_MEEN (0x30U) /*!< Bit mask for NV_FSEC_MEEN. */ +#define BS_NV_FSEC_MEEN (2U) /*!< Bit field size in bits for NV_FSEC_MEEN. */ + +/*! @brief Read current value of the NV_FSEC_MEEN field. */ +#define BR_NV_FSEC_MEEN(x) (HW_NV_FSEC(x).B.MEEN) +/*@}*/ + +/*! + * @name Register NV_FSEC, field KEYEN[7:6] (RO) + * + * Values: + * - 10 - Backdoor key access enabled + * - 11 - Backdoor key access disabled + */ +/*@{*/ +#define BP_NV_FSEC_KEYEN (6U) /*!< Bit position for NV_FSEC_KEYEN. */ +#define BM_NV_FSEC_KEYEN (0xC0U) /*!< Bit mask for NV_FSEC_KEYEN. */ +#define BS_NV_FSEC_KEYEN (2U) /*!< Bit field size in bits for NV_FSEC_KEYEN. */ + +/*! @brief Read current value of the NV_FSEC_KEYEN field. */ +#define BR_NV_FSEC_KEYEN(x) (HW_NV_FSEC(x).B.KEYEN) +/*@}*/ + +/******************************************************************************* + * HW_NV_FOPT - Non-volatile Flash Option Register + ******************************************************************************/ + +/*! + * @brief HW_NV_FOPT - Non-volatile Flash Option Register (RO) + * + * Reset value: 0xFFU + */ +typedef union _hw_nv_fopt +{ + uint8_t U; + struct _hw_nv_fopt_bitfields + { + uint8_t LPBOOT : 1; /*!< [0] */ + uint8_t EZPORT_DIS : 1; /*!< [1] */ + uint8_t NMI_DIS : 1; /*!< [2] */ + uint8_t RESERVED0 : 2; /*!< [4:3] */ + uint8_t FAST_INIT : 1; /*!< [5] */ + uint8_t RESERVED1 : 2; /*!< [7:6] */ + } B; +} hw_nv_fopt_t; + +/*! + * @name Constants and macros for entire NV_FOPT register + */ +/*@{*/ +#define HW_NV_FOPT_ADDR(x) ((x) + 0xDU) + +#define HW_NV_FOPT(x) (*(__I hw_nv_fopt_t *) HW_NV_FOPT_ADDR(x)) +#define HW_NV_FOPT_RD(x) (HW_NV_FOPT(x).U) +/*@}*/ + +/* + * Constants & macros for individual NV_FOPT bitfields + */ + +/*! + * @name Register NV_FOPT, field LPBOOT[0] (RO) + * + * Values: + * - 00 - Low-power boot + * - 01 - Normal boot + */ +/*@{*/ +#define BP_NV_FOPT_LPBOOT (0U) /*!< Bit position for NV_FOPT_LPBOOT. */ +#define BM_NV_FOPT_LPBOOT (0x01U) /*!< Bit mask for NV_FOPT_LPBOOT. */ +#define BS_NV_FOPT_LPBOOT (1U) /*!< Bit field size in bits for NV_FOPT_LPBOOT. */ + +/*! @brief Read current value of the NV_FOPT_LPBOOT field. */ +#define BR_NV_FOPT_LPBOOT(x) (BITBAND_ACCESS8(HW_NV_FOPT_ADDR(x), BP_NV_FOPT_LPBOOT)) +/*@}*/ + +/*! + * @name Register NV_FOPT, field EZPORT_DIS[1] (RO) + */ +/*@{*/ +#define BP_NV_FOPT_EZPORT_DIS (1U) /*!< Bit position for NV_FOPT_EZPORT_DIS. */ +#define BM_NV_FOPT_EZPORT_DIS (0x02U) /*!< Bit mask for NV_FOPT_EZPORT_DIS. */ +#define BS_NV_FOPT_EZPORT_DIS (1U) /*!< Bit field size in bits for NV_FOPT_EZPORT_DIS. */ + +/*! @brief Read current value of the NV_FOPT_EZPORT_DIS field. */ +#define BR_NV_FOPT_EZPORT_DIS(x) (BITBAND_ACCESS8(HW_NV_FOPT_ADDR(x), BP_NV_FOPT_EZPORT_DIS)) +/*@}*/ + +/*! + * @name Register NV_FOPT, field NMI_DIS[2] (RO) + * + * Values: + * - 00 - NMI interrupts are always blocked + * - 01 - NMI_b pin/interrupts reset default to enabled + */ +/*@{*/ +#define BP_NV_FOPT_NMI_DIS (2U) /*!< Bit position for NV_FOPT_NMI_DIS. */ +#define BM_NV_FOPT_NMI_DIS (0x04U) /*!< Bit mask for NV_FOPT_NMI_DIS. */ +#define BS_NV_FOPT_NMI_DIS (1U) /*!< Bit field size in bits for NV_FOPT_NMI_DIS. */ + +/*! @brief Read current value of the NV_FOPT_NMI_DIS field. */ +#define BR_NV_FOPT_NMI_DIS(x) (BITBAND_ACCESS8(HW_NV_FOPT_ADDR(x), BP_NV_FOPT_NMI_DIS)) +/*@}*/ + +/*! + * @name Register NV_FOPT, field FAST_INIT[5] (RO) + * + * Values: + * - 00 - Slower initialization + * - 01 - Fast Initialization + */ +/*@{*/ +#define BP_NV_FOPT_FAST_INIT (5U) /*!< Bit position for NV_FOPT_FAST_INIT. */ +#define BM_NV_FOPT_FAST_INIT (0x20U) /*!< Bit mask for NV_FOPT_FAST_INIT. */ +#define BS_NV_FOPT_FAST_INIT (1U) /*!< Bit field size in bits for NV_FOPT_FAST_INIT. */ + +/*! @brief Read current value of the NV_FOPT_FAST_INIT field. */ +#define BR_NV_FOPT_FAST_INIT(x) (BITBAND_ACCESS8(HW_NV_FOPT_ADDR(x), BP_NV_FOPT_FAST_INIT)) +/*@}*/ + +/******************************************************************************* + * hw_nv_t - module struct + ******************************************************************************/ +/*! + * @brief All NV module registers. + */ +#pragma pack(1) +typedef struct _hw_nv +{ + __I hw_nv_backkey3_t BACKKEY3; /*!< [0x0] Backdoor Comparison Key 3. */ + __I hw_nv_backkey2_t BACKKEY2; /*!< [0x1] Backdoor Comparison Key 2. */ + __I hw_nv_backkey1_t BACKKEY1; /*!< [0x2] Backdoor Comparison Key 1. */ + __I hw_nv_backkey0_t BACKKEY0; /*!< [0x3] Backdoor Comparison Key 0. */ + __I hw_nv_backkey7_t BACKKEY7; /*!< [0x4] Backdoor Comparison Key 7. */ + __I hw_nv_backkey6_t BACKKEY6; /*!< [0x5] Backdoor Comparison Key 6. */ + __I hw_nv_backkey5_t BACKKEY5; /*!< [0x6] Backdoor Comparison Key 5. */ + __I hw_nv_backkey4_t BACKKEY4; /*!< [0x7] Backdoor Comparison Key 4. */ + __I hw_nv_fprot3_t FPROT3; /*!< [0x8] Non-volatile P-Flash Protection 1 - Low Register */ + __I hw_nv_fprot2_t FPROT2; /*!< [0x9] Non-volatile P-Flash Protection 1 - High Register */ + __I hw_nv_fprot1_t FPROT1; /*!< [0xA] Non-volatile P-Flash Protection 0 - Low Register */ + __I hw_nv_fprot0_t FPROT0; /*!< [0xB] Non-volatile P-Flash Protection 0 - High Register */ + __I hw_nv_fsec_t FSEC; /*!< [0xC] Non-volatile Flash Security Register */ + __I hw_nv_fopt_t FOPT; /*!< [0xD] Non-volatile Flash Option Register */ +} hw_nv_t; +#pragma pack() + +/*! @brief Macro to access all NV registers. */ +/*! @param x NV module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_NV(FTFA_FlashConfig_BASE)</code>. */ +#define HW_NV(x) (*(hw_nv_t *)(x)) + +#endif /* __HW_NV_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_osc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_osc.h new file mode 100644 index 0000000000..17df972a46 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_osc.h @@ -0,0 +1,378 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_OSC_REGISTERS_H__ +#define __HW_OSC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 OSC + * + * Oscillator + * + * Registers defined in this header file: + * - HW_OSC_CR - OSC Control Register + * - HW_OSC_DIV - OSC_DIV + * + * - hw_osc_t - Struct containing all module registers. + */ + +#define HW_OSC_INSTANCE_COUNT (1U) /*!< Number of instances of the OSC module. */ + +/******************************************************************************* + * HW_OSC_CR - OSC Control Register + ******************************************************************************/ + +/*! + * @brief HW_OSC_CR - OSC Control Register (RW) + * + * Reset value: 0x00U + * + * After OSC is enabled and starts generating the clocks, the configurations + * such as low power and frequency range, must not be changed. + */ +typedef union _hw_osc_cr +{ + uint8_t U; + struct _hw_osc_cr_bitfields + { + uint8_t SC16P : 1; /*!< [0] Oscillator 16 pF Capacitor Load Configure + * */ + uint8_t SC8P : 1; /*!< [1] Oscillator 8 pF Capacitor Load Configure */ + uint8_t SC4P : 1; /*!< [2] Oscillator 4 pF Capacitor Load Configure */ + uint8_t SC2P : 1; /*!< [3] Oscillator 2 pF Capacitor Load Configure */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t EREFSTEN : 1; /*!< [5] External Reference Stop Enable */ + uint8_t RESERVED1 : 1; /*!< [6] */ + uint8_t ERCLKEN : 1; /*!< [7] External Reference Enable */ + } B; +} hw_osc_cr_t; + +/*! + * @name Constants and macros for entire OSC_CR register + */ +/*@{*/ +#define HW_OSC_CR_ADDR(x) ((x) + 0x0U) + +#define HW_OSC_CR(x) (*(__IO hw_osc_cr_t *) HW_OSC_CR_ADDR(x)) +#define HW_OSC_CR_RD(x) (HW_OSC_CR(x).U) +#define HW_OSC_CR_WR(x, v) (HW_OSC_CR(x).U = (v)) +#define HW_OSC_CR_SET(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) | (v))) +#define HW_OSC_CR_CLR(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) & ~(v))) +#define HW_OSC_CR_TOG(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual OSC_CR bitfields + */ + +/*! + * @name Register OSC_CR, field SC16P[0] (RW) + * + * Configures the oscillator load. + * + * Values: + * - 0 - Disable the selection. + * - 1 - Add 16 pF capacitor to the oscillator load. + */ +/*@{*/ +#define BP_OSC_CR_SC16P (0U) /*!< Bit position for OSC_CR_SC16P. */ +#define BM_OSC_CR_SC16P (0x01U) /*!< Bit mask for OSC_CR_SC16P. */ +#define BS_OSC_CR_SC16P (1U) /*!< Bit field size in bits for OSC_CR_SC16P. */ + +/*! @brief Read current value of the OSC_CR_SC16P field. */ +#define BR_OSC_CR_SC16P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P)) + +/*! @brief Format value for bitfield OSC_CR_SC16P. */ +#define BF_OSC_CR_SC16P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC16P) & BM_OSC_CR_SC16P) + +/*! @brief Set the SC16P field to a new value. */ +#define BW_OSC_CR_SC16P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P) = (v)) +/*@}*/ + +/*! + * @name Register OSC_CR, field SC8P[1] (RW) + * + * Configures the oscillator load. + * + * Values: + * - 0 - Disable the selection. + * - 1 - Add 8 pF capacitor to the oscillator load. + */ +/*@{*/ +#define BP_OSC_CR_SC8P (1U) /*!< Bit position for OSC_CR_SC8P. */ +#define BM_OSC_CR_SC8P (0x02U) /*!< Bit mask for OSC_CR_SC8P. */ +#define BS_OSC_CR_SC8P (1U) /*!< Bit field size in bits for OSC_CR_SC8P. */ + +/*! @brief Read current value of the OSC_CR_SC8P field. */ +#define BR_OSC_CR_SC8P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P)) + +/*! @brief Format value for bitfield OSC_CR_SC8P. */ +#define BF_OSC_CR_SC8P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC8P) & BM_OSC_CR_SC8P) + +/*! @brief Set the SC8P field to a new value. */ +#define BW_OSC_CR_SC8P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P) = (v)) +/*@}*/ + +/*! + * @name Register OSC_CR, field SC4P[2] (RW) + * + * Configures the oscillator load. + * + * Values: + * - 0 - Disable the selection. + * - 1 - Add 4 pF capacitor to the oscillator load. + */ +/*@{*/ +#define BP_OSC_CR_SC4P (2U) /*!< Bit position for OSC_CR_SC4P. */ +#define BM_OSC_CR_SC4P (0x04U) /*!< Bit mask for OSC_CR_SC4P. */ +#define BS_OSC_CR_SC4P (1U) /*!< Bit field size in bits for OSC_CR_SC4P. */ + +/*! @brief Read current value of the OSC_CR_SC4P field. */ +#define BR_OSC_CR_SC4P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P)) + +/*! @brief Format value for bitfield OSC_CR_SC4P. */ +#define BF_OSC_CR_SC4P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC4P) & BM_OSC_CR_SC4P) + +/*! @brief Set the SC4P field to a new value. */ +#define BW_OSC_CR_SC4P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P) = (v)) +/*@}*/ + +/*! + * @name Register OSC_CR, field SC2P[3] (RW) + * + * Configures the oscillator load. + * + * Values: + * - 0 - Disable the selection. + * - 1 - Add 2 pF capacitor to the oscillator load. + */ +/*@{*/ +#define BP_OSC_CR_SC2P (3U) /*!< Bit position for OSC_CR_SC2P. */ +#define BM_OSC_CR_SC2P (0x08U) /*!< Bit mask for OSC_CR_SC2P. */ +#define BS_OSC_CR_SC2P (1U) /*!< Bit field size in bits for OSC_CR_SC2P. */ + +/*! @brief Read current value of the OSC_CR_SC2P field. */ +#define BR_OSC_CR_SC2P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P)) + +/*! @brief Format value for bitfield OSC_CR_SC2P. */ +#define BF_OSC_CR_SC2P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC2P) & BM_OSC_CR_SC2P) + +/*! @brief Set the SC2P field to a new value. */ +#define BW_OSC_CR_SC2P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P) = (v)) +/*@}*/ + +/*! + * @name Register OSC_CR, field EREFSTEN[5] (RW) + * + * Controls whether or not the external reference clock (OSCERCLK) remains + * enabled when MCU enters Stop mode. + * + * Values: + * - 0 - External reference clock is disabled in Stop mode. + * - 1 - External reference clock stays enabled in Stop mode if ERCLKEN is set + * before entering Stop mode. + */ +/*@{*/ +#define BP_OSC_CR_EREFSTEN (5U) /*!< Bit position for OSC_CR_EREFSTEN. */ +#define BM_OSC_CR_EREFSTEN (0x20U) /*!< Bit mask for OSC_CR_EREFSTEN. */ +#define BS_OSC_CR_EREFSTEN (1U) /*!< Bit field size in bits for OSC_CR_EREFSTEN. */ + +/*! @brief Read current value of the OSC_CR_EREFSTEN field. */ +#define BR_OSC_CR_EREFSTEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN)) + +/*! @brief Format value for bitfield OSC_CR_EREFSTEN. */ +#define BF_OSC_CR_EREFSTEN(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_EREFSTEN) & BM_OSC_CR_EREFSTEN) + +/*! @brief Set the EREFSTEN field to a new value. */ +#define BW_OSC_CR_EREFSTEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN) = (v)) +/*@}*/ + +/*! + * @name Register OSC_CR, field ERCLKEN[7] (RW) + * + * Enables external reference clock (OSCERCLK). + * + * Values: + * - 0 - External reference clock is inactive. + * - 1 - External reference clock is enabled. + */ +/*@{*/ +#define BP_OSC_CR_ERCLKEN (7U) /*!< Bit position for OSC_CR_ERCLKEN. */ +#define BM_OSC_CR_ERCLKEN (0x80U) /*!< Bit mask for OSC_CR_ERCLKEN. */ +#define BS_OSC_CR_ERCLKEN (1U) /*!< Bit field size in bits for OSC_CR_ERCLKEN. */ + +/*! @brief Read current value of the OSC_CR_ERCLKEN field. */ +#define BR_OSC_CR_ERCLKEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN)) + +/*! @brief Format value for bitfield OSC_CR_ERCLKEN. */ +#define BF_OSC_CR_ERCLKEN(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_ERCLKEN) & BM_OSC_CR_ERCLKEN) + +/*! @brief Set the ERCLKEN field to a new value. */ +#define BW_OSC_CR_ERCLKEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_OSC_DIV - OSC_DIV + ******************************************************************************/ + +/*! + * @brief HW_OSC_DIV - OSC_DIV (RW) + * + * Reset value: 0x00U + * + * OSC CLock divider register. + */ +typedef union _hw_osc_div +{ + uint8_t U; + struct _hw_osc_div_bitfields + { + uint8_t RESERVED0 : 6; /*!< [5:0] */ + uint8_t ERPS : 2; /*!< [7:6] */ + } B; +} hw_osc_div_t; + +/*! + * @name Constants and macros for entire OSC_DIV register + */ +/*@{*/ +#define HW_OSC_DIV_ADDR(x) ((x) + 0x2U) + +#define HW_OSC_DIV(x) (*(__IO hw_osc_div_t *) HW_OSC_DIV_ADDR(x)) +#define HW_OSC_DIV_RD(x) (HW_OSC_DIV(x).U) +#define HW_OSC_DIV_WR(x, v) (HW_OSC_DIV(x).U = (v)) +#define HW_OSC_DIV_SET(x, v) (HW_OSC_DIV_WR(x, HW_OSC_DIV_RD(x) | (v))) +#define HW_OSC_DIV_CLR(x, v) (HW_OSC_DIV_WR(x, HW_OSC_DIV_RD(x) & ~(v))) +#define HW_OSC_DIV_TOG(x, v) (HW_OSC_DIV_WR(x, HW_OSC_DIV_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual OSC_DIV bitfields + */ + +/*! + * @name Register OSC_DIV, field ERPS[7:6] (RW) + * + * ERCLK prescaler. These two bits are used to divide the ERCLK output. The + * un-divided ERCLK output is not affected by these two bits. + * + * Values: + * - 00 - The divisor ratio is 1. + * - 01 - The divisor ratio is 2. + * - 10 - The divisor ratio is 4. + * - 11 - The divisor ratio is 8. + */ +/*@{*/ +#define BP_OSC_DIV_ERPS (6U) /*!< Bit position for OSC_DIV_ERPS. */ +#define BM_OSC_DIV_ERPS (0xC0U) /*!< Bit mask for OSC_DIV_ERPS. */ +#define BS_OSC_DIV_ERPS (2U) /*!< Bit field size in bits for OSC_DIV_ERPS. */ + +/*! @brief Read current value of the OSC_DIV_ERPS field. */ +#define BR_OSC_DIV_ERPS(x) (HW_OSC_DIV(x).B.ERPS) + +/*! @brief Format value for bitfield OSC_DIV_ERPS. */ +#define BF_OSC_DIV_ERPS(v) ((uint8_t)((uint8_t)(v) << BP_OSC_DIV_ERPS) & BM_OSC_DIV_ERPS) + +/*! @brief Set the ERPS field to a new value. */ +#define BW_OSC_DIV_ERPS(x, v) (HW_OSC_DIV_WR(x, (HW_OSC_DIV_RD(x) & ~BM_OSC_DIV_ERPS) | BF_OSC_DIV_ERPS(v))) +/*@}*/ + +/******************************************************************************* + * hw_osc_t - module struct + ******************************************************************************/ +/*! + * @brief All OSC module registers. + */ +#pragma pack(1) +typedef struct _hw_osc +{ + __IO hw_osc_cr_t CR; /*!< [0x0] OSC Control Register */ + uint8_t _reserved0[1]; + __IO hw_osc_div_t DIV; /*!< [0x2] OSC_DIV */ +} hw_osc_t; +#pragma pack() + +/*! @brief Macro to access all OSC registers. */ +/*! @param x OSC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_OSC(OSC_BASE)</code>. */ +#define HW_OSC(x) (*(hw_osc_t *)(x)) + +#endif /* __HW_OSC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pdb.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pdb.h new file mode 100644 index 0000000000..abc0096953 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pdb.h @@ -0,0 +1,1326 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_PDB_REGISTERS_H__ +#define __HW_PDB_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 PDB + * + * Programmable Delay Block + * + * Registers defined in this header file: + * - HW_PDB_SC - Status and Control register + * - HW_PDB_MOD - Modulus register + * - HW_PDB_CNT - Counter register + * - HW_PDB_IDLY - Interrupt Delay register + * - HW_PDB_CHnC1 - Channel n Control register 1 + * - HW_PDB_CHnS - Channel n Status register + * - HW_PDB_CHnDLY0 - Channel n Delay 0 register + * - HW_PDB_CHnDLY1 - Channel n Delay 1 register + * - HW_PDB_DACINTCn - DAC Interval Trigger n Control register + * - HW_PDB_DACINTn - DAC Interval n register + * - HW_PDB_POEN - Pulse-Out n Enable register + * - HW_PDB_POnDLY - Pulse-Out n Delay register + * + * - hw_pdb_t - Struct containing all module registers. + */ + +#define HW_PDB_INSTANCE_COUNT (1U) /*!< Number of instances of the PDB module. */ + +/******************************************************************************* + * HW_PDB_SC - Status and Control register + ******************************************************************************/ + +/*! + * @brief HW_PDB_SC - Status and Control register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_sc +{ + uint32_t U; + struct _hw_pdb_sc_bitfields + { + uint32_t LDOK : 1; /*!< [0] Load OK */ + uint32_t CONT : 1; /*!< [1] Continuous Mode Enable */ + uint32_t MULT : 2; /*!< [3:2] Multiplication Factor Select for + * Prescaler */ + uint32_t RESERVED0 : 1; /*!< [4] */ + uint32_t PDBIE : 1; /*!< [5] PDB Interrupt Enable */ + uint32_t PDBIF : 1; /*!< [6] PDB Interrupt Flag */ + uint32_t PDBEN : 1; /*!< [7] PDB Enable */ + uint32_t TRGSEL : 4; /*!< [11:8] Trigger Input Source Select */ + uint32_t PRESCALER : 3; /*!< [14:12] Prescaler Divider Select */ + uint32_t DMAEN : 1; /*!< [15] DMA Enable */ + uint32_t SWTRIG : 1; /*!< [16] Software Trigger */ + uint32_t PDBEIE : 1; /*!< [17] PDB Sequence Error Interrupt Enable */ + uint32_t LDMOD : 2; /*!< [19:18] Load Mode Select */ + uint32_t RESERVED1 : 12; /*!< [31:20] */ + } B; +} hw_pdb_sc_t; + +/*! + * @name Constants and macros for entire PDB_SC register + */ +/*@{*/ +#define HW_PDB_SC_ADDR(x) ((x) + 0x0U) + +#define HW_PDB_SC(x) (*(__IO hw_pdb_sc_t *) HW_PDB_SC_ADDR(x)) +#define HW_PDB_SC_RD(x) (HW_PDB_SC(x).U) +#define HW_PDB_SC_WR(x, v) (HW_PDB_SC(x).U = (v)) +#define HW_PDB_SC_SET(x, v) (HW_PDB_SC_WR(x, HW_PDB_SC_RD(x) | (v))) +#define HW_PDB_SC_CLR(x, v) (HW_PDB_SC_WR(x, HW_PDB_SC_RD(x) & ~(v))) +#define HW_PDB_SC_TOG(x, v) (HW_PDB_SC_WR(x, HW_PDB_SC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_SC bitfields + */ + +/*! + * @name Register PDB_SC, field LDOK[0] (RW) + * + * Writing 1 to this bit updates the internal registers of MOD, IDLY, CHnDLYm, + * DACINTx,and POyDLY with the values written to their buffers. The MOD, IDLY, + * CHnDLYm, DACINTx, and POyDLY will take effect according to the LDMOD. After 1 is + * written to the LDOK field, the values in the buffers of above registers are + * not effective and the buffers cannot be written until the values in buffers are + * loaded into their internal registers. LDOK can be written only when PDBEN is + * set or it can be written at the same time with PDBEN being written to 1. It is + * automatically cleared when the values in buffers are loaded into the internal + * registers or the PDBEN is cleared. Writing 0 to it has no effect. + */ +/*@{*/ +#define BP_PDB_SC_LDOK (0U) /*!< Bit position for PDB_SC_LDOK. */ +#define BM_PDB_SC_LDOK (0x00000001U) /*!< Bit mask for PDB_SC_LDOK. */ +#define BS_PDB_SC_LDOK (1U) /*!< Bit field size in bits for PDB_SC_LDOK. */ + +/*! @brief Read current value of the PDB_SC_LDOK field. */ +#define BR_PDB_SC_LDOK(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_LDOK)) + +/*! @brief Format value for bitfield PDB_SC_LDOK. */ +#define BF_PDB_SC_LDOK(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_LDOK) & BM_PDB_SC_LDOK) + +/*! @brief Set the LDOK field to a new value. */ +#define BW_PDB_SC_LDOK(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_LDOK) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field CONT[1] (RW) + * + * Enables the PDB operation in Continuous mode. + * + * Values: + * - 0 - PDB operation in One-Shot mode + * - 1 - PDB operation in Continuous mode + */ +/*@{*/ +#define BP_PDB_SC_CONT (1U) /*!< Bit position for PDB_SC_CONT. */ +#define BM_PDB_SC_CONT (0x00000002U) /*!< Bit mask for PDB_SC_CONT. */ +#define BS_PDB_SC_CONT (1U) /*!< Bit field size in bits for PDB_SC_CONT. */ + +/*! @brief Read current value of the PDB_SC_CONT field. */ +#define BR_PDB_SC_CONT(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_CONT)) + +/*! @brief Format value for bitfield PDB_SC_CONT. */ +#define BF_PDB_SC_CONT(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_CONT) & BM_PDB_SC_CONT) + +/*! @brief Set the CONT field to a new value. */ +#define BW_PDB_SC_CONT(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_CONT) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field MULT[3:2] (RW) + * + * Selects the multiplication factor of the prescaler divider for the counter + * clock. + * + * Values: + * - 00 - Multiplication factor is 1. + * - 01 - Multiplication factor is 10. + * - 10 - Multiplication factor is 20. + * - 11 - Multiplication factor is 40. + */ +/*@{*/ +#define BP_PDB_SC_MULT (2U) /*!< Bit position for PDB_SC_MULT. */ +#define BM_PDB_SC_MULT (0x0000000CU) /*!< Bit mask for PDB_SC_MULT. */ +#define BS_PDB_SC_MULT (2U) /*!< Bit field size in bits for PDB_SC_MULT. */ + +/*! @brief Read current value of the PDB_SC_MULT field. */ +#define BR_PDB_SC_MULT(x) (HW_PDB_SC(x).B.MULT) + +/*! @brief Format value for bitfield PDB_SC_MULT. */ +#define BF_PDB_SC_MULT(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_MULT) & BM_PDB_SC_MULT) + +/*! @brief Set the MULT field to a new value. */ +#define BW_PDB_SC_MULT(x, v) (HW_PDB_SC_WR(x, (HW_PDB_SC_RD(x) & ~BM_PDB_SC_MULT) | BF_PDB_SC_MULT(v))) +/*@}*/ + +/*! + * @name Register PDB_SC, field PDBIE[5] (RW) + * + * Enables the PDB interrupt. When this field is set and DMAEN is cleared, PDBIF + * generates a PDB interrupt. + * + * Values: + * - 0 - PDB interrupt disabled. + * - 1 - PDB interrupt enabled. + */ +/*@{*/ +#define BP_PDB_SC_PDBIE (5U) /*!< Bit position for PDB_SC_PDBIE. */ +#define BM_PDB_SC_PDBIE (0x00000020U) /*!< Bit mask for PDB_SC_PDBIE. */ +#define BS_PDB_SC_PDBIE (1U) /*!< Bit field size in bits for PDB_SC_PDBIE. */ + +/*! @brief Read current value of the PDB_SC_PDBIE field. */ +#define BR_PDB_SC_PDBIE(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBIE)) + +/*! @brief Format value for bitfield PDB_SC_PDBIE. */ +#define BF_PDB_SC_PDBIE(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_PDBIE) & BM_PDB_SC_PDBIE) + +/*! @brief Set the PDBIE field to a new value. */ +#define BW_PDB_SC_PDBIE(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBIE) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field PDBIF[6] (RW) + * + * This field is set when the counter value is equal to the IDLY register. + * Writing zero clears this field. + */ +/*@{*/ +#define BP_PDB_SC_PDBIF (6U) /*!< Bit position for PDB_SC_PDBIF. */ +#define BM_PDB_SC_PDBIF (0x00000040U) /*!< Bit mask for PDB_SC_PDBIF. */ +#define BS_PDB_SC_PDBIF (1U) /*!< Bit field size in bits for PDB_SC_PDBIF. */ + +/*! @brief Read current value of the PDB_SC_PDBIF field. */ +#define BR_PDB_SC_PDBIF(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBIF)) + +/*! @brief Format value for bitfield PDB_SC_PDBIF. */ +#define BF_PDB_SC_PDBIF(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_PDBIF) & BM_PDB_SC_PDBIF) + +/*! @brief Set the PDBIF field to a new value. */ +#define BW_PDB_SC_PDBIF(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBIF) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field PDBEN[7] (RW) + * + * Values: + * - 0 - PDB disabled. Counter is off. + * - 1 - PDB enabled. + */ +/*@{*/ +#define BP_PDB_SC_PDBEN (7U) /*!< Bit position for PDB_SC_PDBEN. */ +#define BM_PDB_SC_PDBEN (0x00000080U) /*!< Bit mask for PDB_SC_PDBEN. */ +#define BS_PDB_SC_PDBEN (1U) /*!< Bit field size in bits for PDB_SC_PDBEN. */ + +/*! @brief Read current value of the PDB_SC_PDBEN field. */ +#define BR_PDB_SC_PDBEN(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBEN)) + +/*! @brief Format value for bitfield PDB_SC_PDBEN. */ +#define BF_PDB_SC_PDBEN(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_PDBEN) & BM_PDB_SC_PDBEN) + +/*! @brief Set the PDBEN field to a new value. */ +#define BW_PDB_SC_PDBEN(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBEN) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field TRGSEL[11:8] (RW) + * + * Selects the trigger input source for the PDB. The trigger input source can be + * internal or external (EXTRG pin), or the software trigger. Refer to chip + * configuration details for the actual PDB input trigger connections. + * + * Values: + * - 0000 - Trigger-In 0 is selected. + * - 0001 - Trigger-In 1 is selected. + * - 0010 - Trigger-In 2 is selected. + * - 0011 - Trigger-In 3 is selected. + * - 0100 - Trigger-In 4 is selected. + * - 0101 - Trigger-In 5 is selected. + * - 0110 - Trigger-In 6 is selected. + * - 0111 - Trigger-In 7 is selected. + * - 1000 - Trigger-In 8 is selected. + * - 1001 - Trigger-In 9 is selected. + * - 1010 - Trigger-In 10 is selected. + * - 1011 - Trigger-In 11 is selected. + * - 1100 - Trigger-In 12 is selected. + * - 1101 - Trigger-In 13 is selected. + * - 1110 - Trigger-In 14 is selected. + * - 1111 - Software trigger is selected. + */ +/*@{*/ +#define BP_PDB_SC_TRGSEL (8U) /*!< Bit position for PDB_SC_TRGSEL. */ +#define BM_PDB_SC_TRGSEL (0x00000F00U) /*!< Bit mask for PDB_SC_TRGSEL. */ +#define BS_PDB_SC_TRGSEL (4U) /*!< Bit field size in bits for PDB_SC_TRGSEL. */ + +/*! @brief Read current value of the PDB_SC_TRGSEL field. */ +#define BR_PDB_SC_TRGSEL(x) (HW_PDB_SC(x).B.TRGSEL) + +/*! @brief Format value for bitfield PDB_SC_TRGSEL. */ +#define BF_PDB_SC_TRGSEL(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_TRGSEL) & BM_PDB_SC_TRGSEL) + +/*! @brief Set the TRGSEL field to a new value. */ +#define BW_PDB_SC_TRGSEL(x, v) (HW_PDB_SC_WR(x, (HW_PDB_SC_RD(x) & ~BM_PDB_SC_TRGSEL) | BF_PDB_SC_TRGSEL(v))) +/*@}*/ + +/*! + * @name Register PDB_SC, field PRESCALER[14:12] (RW) + * + * Values: + * - 000 - Counting uses the peripheral clock divided by multiplication factor + * selected by MULT. + * - 001 - Counting uses the peripheral clock divided by twice of the + * multiplication factor selected by MULT. + * - 010 - Counting uses the peripheral clock divided by four times of the + * multiplication factor selected by MULT. + * - 011 - Counting uses the peripheral clock divided by eight times of the + * multiplication factor selected by MULT. + * - 100 - Counting uses the peripheral clock divided by 16 times of the + * multiplication factor selected by MULT. + * - 101 - Counting uses the peripheral clock divided by 32 times of the + * multiplication factor selected by MULT. + * - 110 - Counting uses the peripheral clock divided by 64 times of the + * multiplication factor selected by MULT. + * - 111 - Counting uses the peripheral clock divided by 128 times of the + * multiplication factor selected by MULT. + */ +/*@{*/ +#define BP_PDB_SC_PRESCALER (12U) /*!< Bit position for PDB_SC_PRESCALER. */ +#define BM_PDB_SC_PRESCALER (0x00007000U) /*!< Bit mask for PDB_SC_PRESCALER. */ +#define BS_PDB_SC_PRESCALER (3U) /*!< Bit field size in bits for PDB_SC_PRESCALER. */ + +/*! @brief Read current value of the PDB_SC_PRESCALER field. */ +#define BR_PDB_SC_PRESCALER(x) (HW_PDB_SC(x).B.PRESCALER) + +/*! @brief Format value for bitfield PDB_SC_PRESCALER. */ +#define BF_PDB_SC_PRESCALER(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_PRESCALER) & BM_PDB_SC_PRESCALER) + +/*! @brief Set the PRESCALER field to a new value. */ +#define BW_PDB_SC_PRESCALER(x, v) (HW_PDB_SC_WR(x, (HW_PDB_SC_RD(x) & ~BM_PDB_SC_PRESCALER) | BF_PDB_SC_PRESCALER(v))) +/*@}*/ + +/*! + * @name Register PDB_SC, field DMAEN[15] (RW) + * + * When DMA is enabled, the PDBIF flag generates a DMA request instead of an + * interrupt. + * + * Values: + * - 0 - DMA disabled. + * - 1 - DMA enabled. + */ +/*@{*/ +#define BP_PDB_SC_DMAEN (15U) /*!< Bit position for PDB_SC_DMAEN. */ +#define BM_PDB_SC_DMAEN (0x00008000U) /*!< Bit mask for PDB_SC_DMAEN. */ +#define BS_PDB_SC_DMAEN (1U) /*!< Bit field size in bits for PDB_SC_DMAEN. */ + +/*! @brief Read current value of the PDB_SC_DMAEN field. */ +#define BR_PDB_SC_DMAEN(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_DMAEN)) + +/*! @brief Format value for bitfield PDB_SC_DMAEN. */ +#define BF_PDB_SC_DMAEN(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_DMAEN) & BM_PDB_SC_DMAEN) + +/*! @brief Set the DMAEN field to a new value. */ +#define BW_PDB_SC_DMAEN(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_DMAEN) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field SWTRIG[16] (WORZ) + * + * When PDB is enabled and the software trigger is selected as the trigger input + * source, writing 1 to this field resets and restarts the counter. Writing 0 to + * this field has no effect. Reading this field results 0. + */ +/*@{*/ +#define BP_PDB_SC_SWTRIG (16U) /*!< Bit position for PDB_SC_SWTRIG. */ +#define BM_PDB_SC_SWTRIG (0x00010000U) /*!< Bit mask for PDB_SC_SWTRIG. */ +#define BS_PDB_SC_SWTRIG (1U) /*!< Bit field size in bits for PDB_SC_SWTRIG. */ + +/*! @brief Format value for bitfield PDB_SC_SWTRIG. */ +#define BF_PDB_SC_SWTRIG(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_SWTRIG) & BM_PDB_SC_SWTRIG) + +/*! @brief Set the SWTRIG field to a new value. */ +#define BW_PDB_SC_SWTRIG(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_SWTRIG) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field PDBEIE[17] (RW) + * + * Enables the PDB sequence error interrupt. When this field is set, any of the + * PDB channel sequence error flags generates a PDB sequence error interrupt. + * + * Values: + * - 0 - PDB sequence error interrupt disabled. + * - 1 - PDB sequence error interrupt enabled. + */ +/*@{*/ +#define BP_PDB_SC_PDBEIE (17U) /*!< Bit position for PDB_SC_PDBEIE. */ +#define BM_PDB_SC_PDBEIE (0x00020000U) /*!< Bit mask for PDB_SC_PDBEIE. */ +#define BS_PDB_SC_PDBEIE (1U) /*!< Bit field size in bits for PDB_SC_PDBEIE. */ + +/*! @brief Read current value of the PDB_SC_PDBEIE field. */ +#define BR_PDB_SC_PDBEIE(x) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBEIE)) + +/*! @brief Format value for bitfield PDB_SC_PDBEIE. */ +#define BF_PDB_SC_PDBEIE(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_PDBEIE) & BM_PDB_SC_PDBEIE) + +/*! @brief Set the PDBEIE field to a new value. */ +#define BW_PDB_SC_PDBEIE(x, v) (BITBAND_ACCESS32(HW_PDB_SC_ADDR(x), BP_PDB_SC_PDBEIE) = (v)) +/*@}*/ + +/*! + * @name Register PDB_SC, field LDMOD[19:18] (RW) + * + * Selects the mode to load the MOD, IDLY, CHnDLYm, INTx, and POyDLY registers, + * after 1 is written to LDOK. + * + * Values: + * - 00 - The internal registers are loaded with the values from their buffers + * immediately after 1 is written to LDOK. + * - 01 - The internal registers are loaded with the values from their buffers + * when the PDB counter reaches the MOD register value after 1 is written to + * LDOK. + * - 10 - The internal registers are loaded with the values from their buffers + * when a trigger input event is detected after 1 is written to LDOK. + * - 11 - The internal registers are loaded with the values from their buffers + * when either the PDB counter reaches the MOD register value or a trigger + * input event is detected, after 1 is written to LDOK. + */ +/*@{*/ +#define BP_PDB_SC_LDMOD (18U) /*!< Bit position for PDB_SC_LDMOD. */ +#define BM_PDB_SC_LDMOD (0x000C0000U) /*!< Bit mask for PDB_SC_LDMOD. */ +#define BS_PDB_SC_LDMOD (2U) /*!< Bit field size in bits for PDB_SC_LDMOD. */ + +/*! @brief Read current value of the PDB_SC_LDMOD field. */ +#define BR_PDB_SC_LDMOD(x) (HW_PDB_SC(x).B.LDMOD) + +/*! @brief Format value for bitfield PDB_SC_LDMOD. */ +#define BF_PDB_SC_LDMOD(v) ((uint32_t)((uint32_t)(v) << BP_PDB_SC_LDMOD) & BM_PDB_SC_LDMOD) + +/*! @brief Set the LDMOD field to a new value. */ +#define BW_PDB_SC_LDMOD(x, v) (HW_PDB_SC_WR(x, (HW_PDB_SC_RD(x) & ~BM_PDB_SC_LDMOD) | BF_PDB_SC_LDMOD(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_MOD - Modulus register + ******************************************************************************/ + +/*! + * @brief HW_PDB_MOD - Modulus register (RW) + * + * Reset value: 0x0000FFFFU + */ +typedef union _hw_pdb_mod +{ + uint32_t U; + struct _hw_pdb_mod_bitfields + { + uint32_t MOD : 16; /*!< [15:0] PDB Modulus */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_mod_t; + +/*! + * @name Constants and macros for entire PDB_MOD register + */ +/*@{*/ +#define HW_PDB_MOD_ADDR(x) ((x) + 0x4U) + +#define HW_PDB_MOD(x) (*(__IO hw_pdb_mod_t *) HW_PDB_MOD_ADDR(x)) +#define HW_PDB_MOD_RD(x) (HW_PDB_MOD(x).U) +#define HW_PDB_MOD_WR(x, v) (HW_PDB_MOD(x).U = (v)) +#define HW_PDB_MOD_SET(x, v) (HW_PDB_MOD_WR(x, HW_PDB_MOD_RD(x) | (v))) +#define HW_PDB_MOD_CLR(x, v) (HW_PDB_MOD_WR(x, HW_PDB_MOD_RD(x) & ~(v))) +#define HW_PDB_MOD_TOG(x, v) (HW_PDB_MOD_WR(x, HW_PDB_MOD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_MOD bitfields + */ + +/*! + * @name Register PDB_MOD, field MOD[15:0] (RW) + * + * Specifies the period of the counter. When the counter reaches this value, it + * will be reset back to zero. If the PDB is in Continuous mode, the count begins + * anew. Reading this field returns the value of the internal register that is + * effective for the current cycle of PDB. + */ +/*@{*/ +#define BP_PDB_MOD_MOD (0U) /*!< Bit position for PDB_MOD_MOD. */ +#define BM_PDB_MOD_MOD (0x0000FFFFU) /*!< Bit mask for PDB_MOD_MOD. */ +#define BS_PDB_MOD_MOD (16U) /*!< Bit field size in bits for PDB_MOD_MOD. */ + +/*! @brief Read current value of the PDB_MOD_MOD field. */ +#define BR_PDB_MOD_MOD(x) (HW_PDB_MOD(x).B.MOD) + +/*! @brief Format value for bitfield PDB_MOD_MOD. */ +#define BF_PDB_MOD_MOD(v) ((uint32_t)((uint32_t)(v) << BP_PDB_MOD_MOD) & BM_PDB_MOD_MOD) + +/*! @brief Set the MOD field to a new value. */ +#define BW_PDB_MOD_MOD(x, v) (HW_PDB_MOD_WR(x, (HW_PDB_MOD_RD(x) & ~BM_PDB_MOD_MOD) | BF_PDB_MOD_MOD(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_CNT - Counter register + ******************************************************************************/ + +/*! + * @brief HW_PDB_CNT - Counter register (RO) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_cnt +{ + uint32_t U; + struct _hw_pdb_cnt_bitfields + { + uint32_t CNT : 16; /*!< [15:0] PDB Counter */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_cnt_t; + +/*! + * @name Constants and macros for entire PDB_CNT register + */ +/*@{*/ +#define HW_PDB_CNT_ADDR(x) ((x) + 0x8U) + +#define HW_PDB_CNT(x) (*(__I hw_pdb_cnt_t *) HW_PDB_CNT_ADDR(x)) +#define HW_PDB_CNT_RD(x) (HW_PDB_CNT(x).U) +/*@}*/ + +/* + * Constants & macros for individual PDB_CNT bitfields + */ + +/*! + * @name Register PDB_CNT, field CNT[15:0] (RO) + * + * Contains the current value of the counter. + */ +/*@{*/ +#define BP_PDB_CNT_CNT (0U) /*!< Bit position for PDB_CNT_CNT. */ +#define BM_PDB_CNT_CNT (0x0000FFFFU) /*!< Bit mask for PDB_CNT_CNT. */ +#define BS_PDB_CNT_CNT (16U) /*!< Bit field size in bits for PDB_CNT_CNT. */ + +/*! @brief Read current value of the PDB_CNT_CNT field. */ +#define BR_PDB_CNT_CNT(x) (HW_PDB_CNT(x).B.CNT) +/*@}*/ + +/******************************************************************************* + * HW_PDB_IDLY - Interrupt Delay register + ******************************************************************************/ + +/*! + * @brief HW_PDB_IDLY - Interrupt Delay register (RW) + * + * Reset value: 0x0000FFFFU + */ +typedef union _hw_pdb_idly +{ + uint32_t U; + struct _hw_pdb_idly_bitfields + { + uint32_t IDLY : 16; /*!< [15:0] PDB Interrupt Delay */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_idly_t; + +/*! + * @name Constants and macros for entire PDB_IDLY register + */ +/*@{*/ +#define HW_PDB_IDLY_ADDR(x) ((x) + 0xCU) + +#define HW_PDB_IDLY(x) (*(__IO hw_pdb_idly_t *) HW_PDB_IDLY_ADDR(x)) +#define HW_PDB_IDLY_RD(x) (HW_PDB_IDLY(x).U) +#define HW_PDB_IDLY_WR(x, v) (HW_PDB_IDLY(x).U = (v)) +#define HW_PDB_IDLY_SET(x, v) (HW_PDB_IDLY_WR(x, HW_PDB_IDLY_RD(x) | (v))) +#define HW_PDB_IDLY_CLR(x, v) (HW_PDB_IDLY_WR(x, HW_PDB_IDLY_RD(x) & ~(v))) +#define HW_PDB_IDLY_TOG(x, v) (HW_PDB_IDLY_WR(x, HW_PDB_IDLY_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_IDLY bitfields + */ + +/*! + * @name Register PDB_IDLY, field IDLY[15:0] (RW) + * + * Specifies the delay value to schedule the PDB interrupt. It can be used to + * schedule an independent interrupt at some point in the PDB cycle. If enabled, a + * PDB interrupt is generated, when the counter is equal to the IDLY. Reading + * this field returns the value of internal register that is effective for the + * current cycle of the PDB. + */ +/*@{*/ +#define BP_PDB_IDLY_IDLY (0U) /*!< Bit position for PDB_IDLY_IDLY. */ +#define BM_PDB_IDLY_IDLY (0x0000FFFFU) /*!< Bit mask for PDB_IDLY_IDLY. */ +#define BS_PDB_IDLY_IDLY (16U) /*!< Bit field size in bits for PDB_IDLY_IDLY. */ + +/*! @brief Read current value of the PDB_IDLY_IDLY field. */ +#define BR_PDB_IDLY_IDLY(x) (HW_PDB_IDLY(x).B.IDLY) + +/*! @brief Format value for bitfield PDB_IDLY_IDLY. */ +#define BF_PDB_IDLY_IDLY(v) ((uint32_t)((uint32_t)(v) << BP_PDB_IDLY_IDLY) & BM_PDB_IDLY_IDLY) + +/*! @brief Set the IDLY field to a new value. */ +#define BW_PDB_IDLY_IDLY(x, v) (HW_PDB_IDLY_WR(x, (HW_PDB_IDLY_RD(x) & ~BM_PDB_IDLY_IDLY) | BF_PDB_IDLY_IDLY(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_CHnC1 - Channel n Control register 1 + ******************************************************************************/ + +/*! + * @brief HW_PDB_CHnC1 - Channel n Control register 1 (RW) + * + * Reset value: 0x00000000U + * + * Each PDB channel has one control register, CHnC1. The bits in this register + * control the functionality of each PDB channel operation. + */ +typedef union _hw_pdb_chnc1 +{ + uint32_t U; + struct _hw_pdb_chnc1_bitfields + { + uint32_t EN : 8; /*!< [7:0] PDB Channel Pre-Trigger Enable */ + uint32_t TOS : 8; /*!< [15:8] PDB Channel Pre-Trigger Output Select */ + uint32_t BB : 8; /*!< [23:16] PDB Channel Pre-Trigger Back-to-Back + * Operation Enable */ + uint32_t RESERVED0 : 8; /*!< [31:24] */ + } B; +} hw_pdb_chnc1_t; + +/*! + * @name Constants and macros for entire PDB_CHnC1 register + */ +/*@{*/ +#define HW_PDB_CHnC1_COUNT (2U) + +#define HW_PDB_CHnC1_ADDR(x, n) ((x) + 0x10U + (0x28U * (n))) + +#define HW_PDB_CHnC1(x, n) (*(__IO hw_pdb_chnc1_t *) HW_PDB_CHnC1_ADDR(x, n)) +#define HW_PDB_CHnC1_RD(x, n) (HW_PDB_CHnC1(x, n).U) +#define HW_PDB_CHnC1_WR(x, n, v) (HW_PDB_CHnC1(x, n).U = (v)) +#define HW_PDB_CHnC1_SET(x, n, v) (HW_PDB_CHnC1_WR(x, n, HW_PDB_CHnC1_RD(x, n) | (v))) +#define HW_PDB_CHnC1_CLR(x, n, v) (HW_PDB_CHnC1_WR(x, n, HW_PDB_CHnC1_RD(x, n) & ~(v))) +#define HW_PDB_CHnC1_TOG(x, n, v) (HW_PDB_CHnC1_WR(x, n, HW_PDB_CHnC1_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_CHnC1 bitfields + */ + +/*! + * @name Register PDB_CHnC1, field EN[7:0] (RW) + * + * These bits enable the PDB ADC pre-trigger outputs. Only lower M pre-trigger + * bits are implemented in this MCU. + * + * Values: + * - 0 - PDB channel's corresponding pre-trigger disabled. + * - 1 - PDB channel's corresponding pre-trigger enabled. + */ +/*@{*/ +#define BP_PDB_CHnC1_EN (0U) /*!< Bit position for PDB_CHnC1_EN. */ +#define BM_PDB_CHnC1_EN (0x000000FFU) /*!< Bit mask for PDB_CHnC1_EN. */ +#define BS_PDB_CHnC1_EN (8U) /*!< Bit field size in bits for PDB_CHnC1_EN. */ + +/*! @brief Read current value of the PDB_CHnC1_EN field. */ +#define BR_PDB_CHnC1_EN(x, n) (HW_PDB_CHnC1(x, n).B.EN) + +/*! @brief Format value for bitfield PDB_CHnC1_EN. */ +#define BF_PDB_CHnC1_EN(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnC1_EN) & BM_PDB_CHnC1_EN) + +/*! @brief Set the EN field to a new value. */ +#define BW_PDB_CHnC1_EN(x, n, v) (HW_PDB_CHnC1_WR(x, n, (HW_PDB_CHnC1_RD(x, n) & ~BM_PDB_CHnC1_EN) | BF_PDB_CHnC1_EN(v))) +/*@}*/ + +/*! + * @name Register PDB_CHnC1, field TOS[15:8] (RW) + * + * Selects the PDB ADC pre-trigger outputs. Only lower M pre-trigger fields are + * implemented in this MCU. + * + * Values: + * - 0 - PDB channel's corresponding pre-trigger is in bypassed mode. The + * pre-trigger asserts one peripheral clock cycle after a rising edge is detected + * on selected trigger input source or software trigger is selected and SWTRIG + * is written with 1. + * - 1 - PDB channel's corresponding pre-trigger asserts when the counter + * reaches the channel delay register and one peripheral clock cycle after a rising + * edge is detected on selected trigger input source or software trigger is + * selected and SETRIG is written with 1. + */ +/*@{*/ +#define BP_PDB_CHnC1_TOS (8U) /*!< Bit position for PDB_CHnC1_TOS. */ +#define BM_PDB_CHnC1_TOS (0x0000FF00U) /*!< Bit mask for PDB_CHnC1_TOS. */ +#define BS_PDB_CHnC1_TOS (8U) /*!< Bit field size in bits for PDB_CHnC1_TOS. */ + +/*! @brief Read current value of the PDB_CHnC1_TOS field. */ +#define BR_PDB_CHnC1_TOS(x, n) (HW_PDB_CHnC1(x, n).B.TOS) + +/*! @brief Format value for bitfield PDB_CHnC1_TOS. */ +#define BF_PDB_CHnC1_TOS(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnC1_TOS) & BM_PDB_CHnC1_TOS) + +/*! @brief Set the TOS field to a new value. */ +#define BW_PDB_CHnC1_TOS(x, n, v) (HW_PDB_CHnC1_WR(x, n, (HW_PDB_CHnC1_RD(x, n) & ~BM_PDB_CHnC1_TOS) | BF_PDB_CHnC1_TOS(v))) +/*@}*/ + +/*! + * @name Register PDB_CHnC1, field BB[23:16] (RW) + * + * These bits enable the PDB ADC pre-trigger operation as back-to-back mode. + * Only lower M pre-trigger bits are implemented in this MCU. Back-to-back operation + * enables the ADC conversions complete to trigger the next PDB channel + * pre-trigger and trigger output, so that the ADC conversions can be triggered on next + * set of configuration and results registers. Application code must only enable + * the back-to-back operation of the PDB pre-triggers at the leading of the + * back-to-back connection chain. + * + * Values: + * - 0 - PDB channel's corresponding pre-trigger back-to-back operation disabled. + * - 1 - PDB channel's corresponding pre-trigger back-to-back operation enabled. + */ +/*@{*/ +#define BP_PDB_CHnC1_BB (16U) /*!< Bit position for PDB_CHnC1_BB. */ +#define BM_PDB_CHnC1_BB (0x00FF0000U) /*!< Bit mask for PDB_CHnC1_BB. */ +#define BS_PDB_CHnC1_BB (8U) /*!< Bit field size in bits for PDB_CHnC1_BB. */ + +/*! @brief Read current value of the PDB_CHnC1_BB field. */ +#define BR_PDB_CHnC1_BB(x, n) (HW_PDB_CHnC1(x, n).B.BB) + +/*! @brief Format value for bitfield PDB_CHnC1_BB. */ +#define BF_PDB_CHnC1_BB(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnC1_BB) & BM_PDB_CHnC1_BB) + +/*! @brief Set the BB field to a new value. */ +#define BW_PDB_CHnC1_BB(x, n, v) (HW_PDB_CHnC1_WR(x, n, (HW_PDB_CHnC1_RD(x, n) & ~BM_PDB_CHnC1_BB) | BF_PDB_CHnC1_BB(v))) +/*@}*/ +/******************************************************************************* + * HW_PDB_CHnS - Channel n Status register + ******************************************************************************/ + +/*! + * @brief HW_PDB_CHnS - Channel n Status register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_chns +{ + uint32_t U; + struct _hw_pdb_chns_bitfields + { + uint32_t ERR : 8; /*!< [7:0] PDB Channel Sequence Error Flags */ + uint32_t RESERVED0 : 8; /*!< [15:8] */ + uint32_t CF : 8; /*!< [23:16] PDB Channel Flags */ + uint32_t RESERVED1 : 8; /*!< [31:24] */ + } B; +} hw_pdb_chns_t; + +/*! + * @name Constants and macros for entire PDB_CHnS register + */ +/*@{*/ +#define HW_PDB_CHnS_COUNT (2U) + +#define HW_PDB_CHnS_ADDR(x, n) ((x) + 0x14U + (0x28U * (n))) + +#define HW_PDB_CHnS(x, n) (*(__IO hw_pdb_chns_t *) HW_PDB_CHnS_ADDR(x, n)) +#define HW_PDB_CHnS_RD(x, n) (HW_PDB_CHnS(x, n).U) +#define HW_PDB_CHnS_WR(x, n, v) (HW_PDB_CHnS(x, n).U = (v)) +#define HW_PDB_CHnS_SET(x, n, v) (HW_PDB_CHnS_WR(x, n, HW_PDB_CHnS_RD(x, n) | (v))) +#define HW_PDB_CHnS_CLR(x, n, v) (HW_PDB_CHnS_WR(x, n, HW_PDB_CHnS_RD(x, n) & ~(v))) +#define HW_PDB_CHnS_TOG(x, n, v) (HW_PDB_CHnS_WR(x, n, HW_PDB_CHnS_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_CHnS bitfields + */ + +/*! + * @name Register PDB_CHnS, field ERR[7:0] (RW) + * + * Only the lower M bits are implemented in this MCU. + * + * Values: + * - 0 - Sequence error not detected on PDB channel's corresponding pre-trigger. + * - 1 - Sequence error detected on PDB channel's corresponding pre-trigger. + * ADCn block can be triggered for a conversion by one pre-trigger from PDB + * channel n. When one conversion, which is triggered by one of the pre-triggers + * from PDB channel n, is in progress, new trigger from PDB channel's + * corresponding pre-trigger m cannot be accepted by ADCn, and ERR[m] is set. + * Writing 0's to clear the sequence error flags. + */ +/*@{*/ +#define BP_PDB_CHnS_ERR (0U) /*!< Bit position for PDB_CHnS_ERR. */ +#define BM_PDB_CHnS_ERR (0x000000FFU) /*!< Bit mask for PDB_CHnS_ERR. */ +#define BS_PDB_CHnS_ERR (8U) /*!< Bit field size in bits for PDB_CHnS_ERR. */ + +/*! @brief Read current value of the PDB_CHnS_ERR field. */ +#define BR_PDB_CHnS_ERR(x, n) (HW_PDB_CHnS(x, n).B.ERR) + +/*! @brief Format value for bitfield PDB_CHnS_ERR. */ +#define BF_PDB_CHnS_ERR(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnS_ERR) & BM_PDB_CHnS_ERR) + +/*! @brief Set the ERR field to a new value. */ +#define BW_PDB_CHnS_ERR(x, n, v) (HW_PDB_CHnS_WR(x, n, (HW_PDB_CHnS_RD(x, n) & ~BM_PDB_CHnS_ERR) | BF_PDB_CHnS_ERR(v))) +/*@}*/ + +/*! + * @name Register PDB_CHnS, field CF[23:16] (RW) + * + * The CF[m] bit is set when the PDB counter matches the CHnDLYm. Write 0 to + * clear these bits. + */ +/*@{*/ +#define BP_PDB_CHnS_CF (16U) /*!< Bit position for PDB_CHnS_CF. */ +#define BM_PDB_CHnS_CF (0x00FF0000U) /*!< Bit mask for PDB_CHnS_CF. */ +#define BS_PDB_CHnS_CF (8U) /*!< Bit field size in bits for PDB_CHnS_CF. */ + +/*! @brief Read current value of the PDB_CHnS_CF field. */ +#define BR_PDB_CHnS_CF(x, n) (HW_PDB_CHnS(x, n).B.CF) + +/*! @brief Format value for bitfield PDB_CHnS_CF. */ +#define BF_PDB_CHnS_CF(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnS_CF) & BM_PDB_CHnS_CF) + +/*! @brief Set the CF field to a new value. */ +#define BW_PDB_CHnS_CF(x, n, v) (HW_PDB_CHnS_WR(x, n, (HW_PDB_CHnS_RD(x, n) & ~BM_PDB_CHnS_CF) | BF_PDB_CHnS_CF(v))) +/*@}*/ +/******************************************************************************* + * HW_PDB_CHnDLY0 - Channel n Delay 0 register + ******************************************************************************/ + +/*! + * @brief HW_PDB_CHnDLY0 - Channel n Delay 0 register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_chndly0 +{ + uint32_t U; + struct _hw_pdb_chndly0_bitfields + { + uint32_t DLY : 16; /*!< [15:0] PDB Channel Delay */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_chndly0_t; + +/*! + * @name Constants and macros for entire PDB_CHnDLY0 register + */ +/*@{*/ +#define HW_PDB_CHnDLY0_COUNT (2U) + +#define HW_PDB_CHnDLY0_ADDR(x, n) ((x) + 0x18U + (0x28U * (n))) + +#define HW_PDB_CHnDLY0(x, n) (*(__IO hw_pdb_chndly0_t *) HW_PDB_CHnDLY0_ADDR(x, n)) +#define HW_PDB_CHnDLY0_RD(x, n) (HW_PDB_CHnDLY0(x, n).U) +#define HW_PDB_CHnDLY0_WR(x, n, v) (HW_PDB_CHnDLY0(x, n).U = (v)) +#define HW_PDB_CHnDLY0_SET(x, n, v) (HW_PDB_CHnDLY0_WR(x, n, HW_PDB_CHnDLY0_RD(x, n) | (v))) +#define HW_PDB_CHnDLY0_CLR(x, n, v) (HW_PDB_CHnDLY0_WR(x, n, HW_PDB_CHnDLY0_RD(x, n) & ~(v))) +#define HW_PDB_CHnDLY0_TOG(x, n, v) (HW_PDB_CHnDLY0_WR(x, n, HW_PDB_CHnDLY0_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_CHnDLY0 bitfields + */ + +/*! + * @name Register PDB_CHnDLY0, field DLY[15:0] (RW) + * + * Specifies the delay value for the channel's corresponding pre-trigger. The + * pre-trigger asserts when the counter is equal to DLY. Reading this field returns + * the value of internal register that is effective for the current PDB cycle. + */ +/*@{*/ +#define BP_PDB_CHnDLY0_DLY (0U) /*!< Bit position for PDB_CHnDLY0_DLY. */ +#define BM_PDB_CHnDLY0_DLY (0x0000FFFFU) /*!< Bit mask for PDB_CHnDLY0_DLY. */ +#define BS_PDB_CHnDLY0_DLY (16U) /*!< Bit field size in bits for PDB_CHnDLY0_DLY. */ + +/*! @brief Read current value of the PDB_CHnDLY0_DLY field. */ +#define BR_PDB_CHnDLY0_DLY(x, n) (HW_PDB_CHnDLY0(x, n).B.DLY) + +/*! @brief Format value for bitfield PDB_CHnDLY0_DLY. */ +#define BF_PDB_CHnDLY0_DLY(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnDLY0_DLY) & BM_PDB_CHnDLY0_DLY) + +/*! @brief Set the DLY field to a new value. */ +#define BW_PDB_CHnDLY0_DLY(x, n, v) (HW_PDB_CHnDLY0_WR(x, n, (HW_PDB_CHnDLY0_RD(x, n) & ~BM_PDB_CHnDLY0_DLY) | BF_PDB_CHnDLY0_DLY(v))) +/*@}*/ +/******************************************************************************* + * HW_PDB_CHnDLY1 - Channel n Delay 1 register + ******************************************************************************/ + +/*! + * @brief HW_PDB_CHnDLY1 - Channel n Delay 1 register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_chndly1 +{ + uint32_t U; + struct _hw_pdb_chndly1_bitfields + { + uint32_t DLY : 16; /*!< [15:0] PDB Channel Delay */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_chndly1_t; + +/*! + * @name Constants and macros for entire PDB_CHnDLY1 register + */ +/*@{*/ +#define HW_PDB_CHnDLY1_COUNT (2U) + +#define HW_PDB_CHnDLY1_ADDR(x, n) ((x) + 0x1CU + (0x28U * (n))) + +#define HW_PDB_CHnDLY1(x, n) (*(__IO hw_pdb_chndly1_t *) HW_PDB_CHnDLY1_ADDR(x, n)) +#define HW_PDB_CHnDLY1_RD(x, n) (HW_PDB_CHnDLY1(x, n).U) +#define HW_PDB_CHnDLY1_WR(x, n, v) (HW_PDB_CHnDLY1(x, n).U = (v)) +#define HW_PDB_CHnDLY1_SET(x, n, v) (HW_PDB_CHnDLY1_WR(x, n, HW_PDB_CHnDLY1_RD(x, n) | (v))) +#define HW_PDB_CHnDLY1_CLR(x, n, v) (HW_PDB_CHnDLY1_WR(x, n, HW_PDB_CHnDLY1_RD(x, n) & ~(v))) +#define HW_PDB_CHnDLY1_TOG(x, n, v) (HW_PDB_CHnDLY1_WR(x, n, HW_PDB_CHnDLY1_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_CHnDLY1 bitfields + */ + +/*! + * @name Register PDB_CHnDLY1, field DLY[15:0] (RW) + * + * These bits specify the delay value for the channel's corresponding + * pre-trigger. The pre-trigger asserts when the counter is equal to DLY. Reading these + * bits returns the value of internal register that is effective for the current PDB + * cycle. + */ +/*@{*/ +#define BP_PDB_CHnDLY1_DLY (0U) /*!< Bit position for PDB_CHnDLY1_DLY. */ +#define BM_PDB_CHnDLY1_DLY (0x0000FFFFU) /*!< Bit mask for PDB_CHnDLY1_DLY. */ +#define BS_PDB_CHnDLY1_DLY (16U) /*!< Bit field size in bits for PDB_CHnDLY1_DLY. */ + +/*! @brief Read current value of the PDB_CHnDLY1_DLY field. */ +#define BR_PDB_CHnDLY1_DLY(x, n) (HW_PDB_CHnDLY1(x, n).B.DLY) + +/*! @brief Format value for bitfield PDB_CHnDLY1_DLY. */ +#define BF_PDB_CHnDLY1_DLY(v) ((uint32_t)((uint32_t)(v) << BP_PDB_CHnDLY1_DLY) & BM_PDB_CHnDLY1_DLY) + +/*! @brief Set the DLY field to a new value. */ +#define BW_PDB_CHnDLY1_DLY(x, n, v) (HW_PDB_CHnDLY1_WR(x, n, (HW_PDB_CHnDLY1_RD(x, n) & ~BM_PDB_CHnDLY1_DLY) | BF_PDB_CHnDLY1_DLY(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_DACINTCn - DAC Interval Trigger n Control register + ******************************************************************************/ + +/*! + * @brief HW_PDB_DACINTCn - DAC Interval Trigger n Control register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_dacintcn +{ + uint32_t U; + struct _hw_pdb_dacintcn_bitfields + { + uint32_t TOE : 1; /*!< [0] DAC Interval Trigger Enable */ + uint32_t EXT : 1; /*!< [1] DAC External Trigger Input Enable */ + uint32_t RESERVED0 : 30; /*!< [31:2] */ + } B; +} hw_pdb_dacintcn_t; + +/*! + * @name Constants and macros for entire PDB_DACINTCn register + */ +/*@{*/ +#define HW_PDB_DACINTCn_COUNT (2U) + +#define HW_PDB_DACINTCn_ADDR(x, n) ((x) + 0x150U + (0x8U * (n))) + +#define HW_PDB_DACINTCn(x, n) (*(__IO hw_pdb_dacintcn_t *) HW_PDB_DACINTCn_ADDR(x, n)) +#define HW_PDB_DACINTCn_RD(x, n) (HW_PDB_DACINTCn(x, n).U) +#define HW_PDB_DACINTCn_WR(x, n, v) (HW_PDB_DACINTCn(x, n).U = (v)) +#define HW_PDB_DACINTCn_SET(x, n, v) (HW_PDB_DACINTCn_WR(x, n, HW_PDB_DACINTCn_RD(x, n) | (v))) +#define HW_PDB_DACINTCn_CLR(x, n, v) (HW_PDB_DACINTCn_WR(x, n, HW_PDB_DACINTCn_RD(x, n) & ~(v))) +#define HW_PDB_DACINTCn_TOG(x, n, v) (HW_PDB_DACINTCn_WR(x, n, HW_PDB_DACINTCn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_DACINTCn bitfields + */ + +/*! + * @name Register PDB_DACINTCn, field TOE[0] (RW) + * + * This bit enables the DAC interval trigger. + * + * Values: + * - 0 - DAC interval trigger disabled. + * - 1 - DAC interval trigger enabled. + */ +/*@{*/ +#define BP_PDB_DACINTCn_TOE (0U) /*!< Bit position for PDB_DACINTCn_TOE. */ +#define BM_PDB_DACINTCn_TOE (0x00000001U) /*!< Bit mask for PDB_DACINTCn_TOE. */ +#define BS_PDB_DACINTCn_TOE (1U) /*!< Bit field size in bits for PDB_DACINTCn_TOE. */ + +/*! @brief Read current value of the PDB_DACINTCn_TOE field. */ +#define BR_PDB_DACINTCn_TOE(x, n) (BITBAND_ACCESS32(HW_PDB_DACINTCn_ADDR(x, n), BP_PDB_DACINTCn_TOE)) + +/*! @brief Format value for bitfield PDB_DACINTCn_TOE. */ +#define BF_PDB_DACINTCn_TOE(v) ((uint32_t)((uint32_t)(v) << BP_PDB_DACINTCn_TOE) & BM_PDB_DACINTCn_TOE) + +/*! @brief Set the TOE field to a new value. */ +#define BW_PDB_DACINTCn_TOE(x, n, v) (BITBAND_ACCESS32(HW_PDB_DACINTCn_ADDR(x, n), BP_PDB_DACINTCn_TOE) = (v)) +/*@}*/ + +/*! + * @name Register PDB_DACINTCn, field EXT[1] (RW) + * + * Enables the external trigger for DAC interval counter. + * + * Values: + * - 0 - DAC external trigger input disabled. DAC interval counter is reset and + * counting starts when a rising edge is detected on selected trigger input + * source or software trigger is selected and SWTRIG is written with 1. + * - 1 - DAC external trigger input enabled. DAC interval counter is bypassed + * and DAC external trigger input triggers the DAC interval trigger. + */ +/*@{*/ +#define BP_PDB_DACINTCn_EXT (1U) /*!< Bit position for PDB_DACINTCn_EXT. */ +#define BM_PDB_DACINTCn_EXT (0x00000002U) /*!< Bit mask for PDB_DACINTCn_EXT. */ +#define BS_PDB_DACINTCn_EXT (1U) /*!< Bit field size in bits for PDB_DACINTCn_EXT. */ + +/*! @brief Read current value of the PDB_DACINTCn_EXT field. */ +#define BR_PDB_DACINTCn_EXT(x, n) (BITBAND_ACCESS32(HW_PDB_DACINTCn_ADDR(x, n), BP_PDB_DACINTCn_EXT)) + +/*! @brief Format value for bitfield PDB_DACINTCn_EXT. */ +#define BF_PDB_DACINTCn_EXT(v) ((uint32_t)((uint32_t)(v) << BP_PDB_DACINTCn_EXT) & BM_PDB_DACINTCn_EXT) + +/*! @brief Set the EXT field to a new value. */ +#define BW_PDB_DACINTCn_EXT(x, n, v) (BITBAND_ACCESS32(HW_PDB_DACINTCn_ADDR(x, n), BP_PDB_DACINTCn_EXT) = (v)) +/*@}*/ +/******************************************************************************* + * HW_PDB_DACINTn - DAC Interval n register + ******************************************************************************/ + +/*! + * @brief HW_PDB_DACINTn - DAC Interval n register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_dacintn +{ + uint32_t U; + struct _hw_pdb_dacintn_bitfields + { + uint32_t INT : 16; /*!< [15:0] DAC Interval */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_pdb_dacintn_t; + +/*! + * @name Constants and macros for entire PDB_DACINTn register + */ +/*@{*/ +#define HW_PDB_DACINTn_COUNT (2U) + +#define HW_PDB_DACINTn_ADDR(x, n) ((x) + 0x154U + (0x8U * (n))) + +#define HW_PDB_DACINTn(x, n) (*(__IO hw_pdb_dacintn_t *) HW_PDB_DACINTn_ADDR(x, n)) +#define HW_PDB_DACINTn_RD(x, n) (HW_PDB_DACINTn(x, n).U) +#define HW_PDB_DACINTn_WR(x, n, v) (HW_PDB_DACINTn(x, n).U = (v)) +#define HW_PDB_DACINTn_SET(x, n, v) (HW_PDB_DACINTn_WR(x, n, HW_PDB_DACINTn_RD(x, n) | (v))) +#define HW_PDB_DACINTn_CLR(x, n, v) (HW_PDB_DACINTn_WR(x, n, HW_PDB_DACINTn_RD(x, n) & ~(v))) +#define HW_PDB_DACINTn_TOG(x, n, v) (HW_PDB_DACINTn_WR(x, n, HW_PDB_DACINTn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_DACINTn bitfields + */ + +/*! + * @name Register PDB_DACINTn, field INT[15:0] (RW) + * + * Specifies the interval value for DAC interval trigger. DAC interval trigger + * triggers DAC[1:0] update when the DAC interval counter is equal to the DACINT. + * Reading this field returns the value of internal register that is effective + * for the current PDB cycle. + */ +/*@{*/ +#define BP_PDB_DACINTn_INT (0U) /*!< Bit position for PDB_DACINTn_INT. */ +#define BM_PDB_DACINTn_INT (0x0000FFFFU) /*!< Bit mask for PDB_DACINTn_INT. */ +#define BS_PDB_DACINTn_INT (16U) /*!< Bit field size in bits for PDB_DACINTn_INT. */ + +/*! @brief Read current value of the PDB_DACINTn_INT field. */ +#define BR_PDB_DACINTn_INT(x, n) (HW_PDB_DACINTn(x, n).B.INT) + +/*! @brief Format value for bitfield PDB_DACINTn_INT. */ +#define BF_PDB_DACINTn_INT(v) ((uint32_t)((uint32_t)(v) << BP_PDB_DACINTn_INT) & BM_PDB_DACINTn_INT) + +/*! @brief Set the INT field to a new value. */ +#define BW_PDB_DACINTn_INT(x, n, v) (HW_PDB_DACINTn_WR(x, n, (HW_PDB_DACINTn_RD(x, n) & ~BM_PDB_DACINTn_INT) | BF_PDB_DACINTn_INT(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_POEN - Pulse-Out n Enable register + ******************************************************************************/ + +/*! + * @brief HW_PDB_POEN - Pulse-Out n Enable register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_poen +{ + uint32_t U; + struct _hw_pdb_poen_bitfields + { + uint32_t POEN : 8; /*!< [7:0] PDB Pulse-Out Enable */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_pdb_poen_t; + +/*! + * @name Constants and macros for entire PDB_POEN register + */ +/*@{*/ +#define HW_PDB_POEN_ADDR(x) ((x) + 0x190U) + +#define HW_PDB_POEN(x) (*(__IO hw_pdb_poen_t *) HW_PDB_POEN_ADDR(x)) +#define HW_PDB_POEN_RD(x) (HW_PDB_POEN(x).U) +#define HW_PDB_POEN_WR(x, v) (HW_PDB_POEN(x).U = (v)) +#define HW_PDB_POEN_SET(x, v) (HW_PDB_POEN_WR(x, HW_PDB_POEN_RD(x) | (v))) +#define HW_PDB_POEN_CLR(x, v) (HW_PDB_POEN_WR(x, HW_PDB_POEN_RD(x) & ~(v))) +#define HW_PDB_POEN_TOG(x, v) (HW_PDB_POEN_WR(x, HW_PDB_POEN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_POEN bitfields + */ + +/*! + * @name Register PDB_POEN, field POEN[7:0] (RW) + * + * Enables the pulse output. Only lower Y bits are implemented in this MCU. + * + * Values: + * - 0 - PDB Pulse-Out disabled + * - 1 - PDB Pulse-Out enabled + */ +/*@{*/ +#define BP_PDB_POEN_POEN (0U) /*!< Bit position for PDB_POEN_POEN. */ +#define BM_PDB_POEN_POEN (0x000000FFU) /*!< Bit mask for PDB_POEN_POEN. */ +#define BS_PDB_POEN_POEN (8U) /*!< Bit field size in bits for PDB_POEN_POEN. */ + +/*! @brief Read current value of the PDB_POEN_POEN field. */ +#define BR_PDB_POEN_POEN(x) (HW_PDB_POEN(x).B.POEN) + +/*! @brief Format value for bitfield PDB_POEN_POEN. */ +#define BF_PDB_POEN_POEN(v) ((uint32_t)((uint32_t)(v) << BP_PDB_POEN_POEN) & BM_PDB_POEN_POEN) + +/*! @brief Set the POEN field to a new value. */ +#define BW_PDB_POEN_POEN(x, v) (HW_PDB_POEN_WR(x, (HW_PDB_POEN_RD(x) & ~BM_PDB_POEN_POEN) | BF_PDB_POEN_POEN(v))) +/*@}*/ + +/******************************************************************************* + * HW_PDB_POnDLY - Pulse-Out n Delay register + ******************************************************************************/ + +/*! + * @brief HW_PDB_POnDLY - Pulse-Out n Delay register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_pdb_pondly +{ + uint32_t U; + struct _hw_pdb_pondly_bitfields + { + uint32_t DLY2 : 16; /*!< [15:0] PDB Pulse-Out Delay 2 */ + uint32_t DLY1 : 16; /*!< [31:16] PDB Pulse-Out Delay 1 */ + } B; +} hw_pdb_pondly_t; + +/*! + * @name Constants and macros for entire PDB_POnDLY register + */ +/*@{*/ +#define HW_PDB_POnDLY_COUNT (2U) + +#define HW_PDB_POnDLY_ADDR(x, n) ((x) + 0x194U + (0x4U * (n))) + +#define HW_PDB_POnDLY(x, n) (*(__IO hw_pdb_pondly_t *) HW_PDB_POnDLY_ADDR(x, n)) +#define HW_PDB_POnDLY_RD(x, n) (HW_PDB_POnDLY(x, n).U) +#define HW_PDB_POnDLY_WR(x, n, v) (HW_PDB_POnDLY(x, n).U = (v)) +#define HW_PDB_POnDLY_SET(x, n, v) (HW_PDB_POnDLY_WR(x, n, HW_PDB_POnDLY_RD(x, n) | (v))) +#define HW_PDB_POnDLY_CLR(x, n, v) (HW_PDB_POnDLY_WR(x, n, HW_PDB_POnDLY_RD(x, n) & ~(v))) +#define HW_PDB_POnDLY_TOG(x, n, v) (HW_PDB_POnDLY_WR(x, n, HW_PDB_POnDLY_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PDB_POnDLY bitfields + */ + +/*! + * @name Register PDB_POnDLY, field DLY2[15:0] (RW) + * + * Specifies the delay 2 value for the PDB Pulse-Out. Pulse-Out goes low when + * the PDB counter is equal to the DLY2. Reading this field returns the value of + * internal register that is effective for the current PDB cycle. + */ +/*@{*/ +#define BP_PDB_POnDLY_DLY2 (0U) /*!< Bit position for PDB_POnDLY_DLY2. */ +#define BM_PDB_POnDLY_DLY2 (0x0000FFFFU) /*!< Bit mask for PDB_POnDLY_DLY2. */ +#define BS_PDB_POnDLY_DLY2 (16U) /*!< Bit field size in bits for PDB_POnDLY_DLY2. */ + +/*! @brief Read current value of the PDB_POnDLY_DLY2 field. */ +#define BR_PDB_POnDLY_DLY2(x, n) (HW_PDB_POnDLY(x, n).B.DLY2) + +/*! @brief Format value for bitfield PDB_POnDLY_DLY2. */ +#define BF_PDB_POnDLY_DLY2(v) ((uint32_t)((uint32_t)(v) << BP_PDB_POnDLY_DLY2) & BM_PDB_POnDLY_DLY2) + +/*! @brief Set the DLY2 field to a new value. */ +#define BW_PDB_POnDLY_DLY2(x, n, v) (HW_PDB_POnDLY_WR(x, n, (HW_PDB_POnDLY_RD(x, n) & ~BM_PDB_POnDLY_DLY2) | BF_PDB_POnDLY_DLY2(v))) +/*@}*/ + +/*! + * @name Register PDB_POnDLY, field DLY1[31:16] (RW) + * + * Specifies the delay 1 value for the PDB Pulse-Out. Pulse-Out goes high when + * the PDB counter is equal to the DLY1. Reading this field returns the value of + * internal register that is effective for the current PDB cycle. + */ +/*@{*/ +#define BP_PDB_POnDLY_DLY1 (16U) /*!< Bit position for PDB_POnDLY_DLY1. */ +#define BM_PDB_POnDLY_DLY1 (0xFFFF0000U) /*!< Bit mask for PDB_POnDLY_DLY1. */ +#define BS_PDB_POnDLY_DLY1 (16U) /*!< Bit field size in bits for PDB_POnDLY_DLY1. */ + +/*! @brief Read current value of the PDB_POnDLY_DLY1 field. */ +#define BR_PDB_POnDLY_DLY1(x, n) (HW_PDB_POnDLY(x, n).B.DLY1) + +/*! @brief Format value for bitfield PDB_POnDLY_DLY1. */ +#define BF_PDB_POnDLY_DLY1(v) ((uint32_t)((uint32_t)(v) << BP_PDB_POnDLY_DLY1) & BM_PDB_POnDLY_DLY1) + +/*! @brief Set the DLY1 field to a new value. */ +#define BW_PDB_POnDLY_DLY1(x, n, v) (HW_PDB_POnDLY_WR(x, n, (HW_PDB_POnDLY_RD(x, n) & ~BM_PDB_POnDLY_DLY1) | BF_PDB_POnDLY_DLY1(v))) +/*@}*/ + +/******************************************************************************* + * hw_pdb_t - module struct + ******************************************************************************/ +/*! + * @brief All PDB module registers. + */ +#pragma pack(1) +typedef struct _hw_pdb +{ + __IO hw_pdb_sc_t SC; /*!< [0x0] Status and Control register */ + __IO hw_pdb_mod_t MOD; /*!< [0x4] Modulus register */ + __I hw_pdb_cnt_t CNT; /*!< [0x8] Counter register */ + __IO hw_pdb_idly_t IDLY; /*!< [0xC] Interrupt Delay register */ + struct { + __IO hw_pdb_chnc1_t CHnC1; /*!< [0x10] Channel n Control register 1 */ + __IO hw_pdb_chns_t CHnS; /*!< [0x14] Channel n Status register */ + __IO hw_pdb_chndly0_t CHnDLY0; /*!< [0x18] Channel n Delay 0 register */ + __IO hw_pdb_chndly1_t CHnDLY1; /*!< [0x1C] Channel n Delay 1 register */ + uint8_t _reserved0[24]; + } CH[2]; + uint8_t _reserved0[240]; + struct { + __IO hw_pdb_dacintcn_t DACINTCn; /*!< [0x150] DAC Interval Trigger n Control register */ + __IO hw_pdb_dacintn_t DACINTn; /*!< [0x154] DAC Interval n register */ + } DAC[2]; + uint8_t _reserved1[48]; + __IO hw_pdb_poen_t POEN; /*!< [0x190] Pulse-Out n Enable register */ + __IO hw_pdb_pondly_t POnDLY[2]; /*!< [0x194] Pulse-Out n Delay register */ +} hw_pdb_t; +#pragma pack() + +/*! @brief Macro to access all PDB registers. */ +/*! @param x PDB module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_PDB(PDB0_BASE)</code>. */ +#define HW_PDB(x) (*(hw_pdb_t *)(x)) + +#endif /* __HW_PDB_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pit.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pit.h new file mode 100644 index 0000000000..ce537b1d82 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pit.h @@ -0,0 +1,516 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_PIT_REGISTERS_H__ +#define __HW_PIT_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 PIT + * + * Periodic Interrupt Timer + * + * Registers defined in this header file: + * - HW_PIT_MCR - PIT Module Control Register + * - HW_PIT_LDVALn - Timer Load Value Register + * - HW_PIT_CVALn - Current Timer Value Register + * - HW_PIT_TCTRLn - Timer Control Register + * - HW_PIT_TFLGn - Timer Flag Register + * + * - hw_pit_t - Struct containing all module registers. + */ + +#define HW_PIT_INSTANCE_COUNT (1U) /*!< Number of instances of the PIT module. */ + +/******************************************************************************* + * HW_PIT_MCR - PIT Module Control Register + ******************************************************************************/ + +/*! + * @brief HW_PIT_MCR - PIT Module Control Register (RW) + * + * Reset value: 0x00000006U + * + * This register enables or disables the PIT timer clocks and controls the + * timers when the PIT enters the Debug mode. + */ +typedef union _hw_pit_mcr +{ + uint32_t U; + struct _hw_pit_mcr_bitfields + { + uint32_t FRZ : 1; /*!< [0] Freeze */ + uint32_t MDIS : 1; /*!< [1] Module Disable - (PIT section) */ + uint32_t RESERVED0 : 30; /*!< [31:2] */ + } B; +} hw_pit_mcr_t; + +/*! + * @name Constants and macros for entire PIT_MCR register + */ +/*@{*/ +#define HW_PIT_MCR_ADDR(x) ((x) + 0x0U) + +#define HW_PIT_MCR(x) (*(__IO hw_pit_mcr_t *) HW_PIT_MCR_ADDR(x)) +#define HW_PIT_MCR_RD(x) (HW_PIT_MCR(x).U) +#define HW_PIT_MCR_WR(x, v) (HW_PIT_MCR(x).U = (v)) +#define HW_PIT_MCR_SET(x, v) (HW_PIT_MCR_WR(x, HW_PIT_MCR_RD(x) | (v))) +#define HW_PIT_MCR_CLR(x, v) (HW_PIT_MCR_WR(x, HW_PIT_MCR_RD(x) & ~(v))) +#define HW_PIT_MCR_TOG(x, v) (HW_PIT_MCR_WR(x, HW_PIT_MCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PIT_MCR bitfields + */ + +/*! + * @name Register PIT_MCR, field FRZ[0] (RW) + * + * Allows the timers to be stopped when the device enters the Debug mode. + * + * Values: + * - 0 - Timers continue to run in Debug mode. + * - 1 - Timers are stopped in Debug mode. + */ +/*@{*/ +#define BP_PIT_MCR_FRZ (0U) /*!< Bit position for PIT_MCR_FRZ. */ +#define BM_PIT_MCR_FRZ (0x00000001U) /*!< Bit mask for PIT_MCR_FRZ. */ +#define BS_PIT_MCR_FRZ (1U) /*!< Bit field size in bits for PIT_MCR_FRZ. */ + +/*! @brief Read current value of the PIT_MCR_FRZ field. */ +#define BR_PIT_MCR_FRZ(x) (BITBAND_ACCESS32(HW_PIT_MCR_ADDR(x), BP_PIT_MCR_FRZ)) + +/*! @brief Format value for bitfield PIT_MCR_FRZ. */ +#define BF_PIT_MCR_FRZ(v) ((uint32_t)((uint32_t)(v) << BP_PIT_MCR_FRZ) & BM_PIT_MCR_FRZ) + +/*! @brief Set the FRZ field to a new value. */ +#define BW_PIT_MCR_FRZ(x, v) (BITBAND_ACCESS32(HW_PIT_MCR_ADDR(x), BP_PIT_MCR_FRZ) = (v)) +/*@}*/ + +/*! + * @name Register PIT_MCR, field MDIS[1] (RW) + * + * Disables the standard timers. This field must be enabled before any other + * setup is done. + * + * Values: + * - 0 - Clock for standard PIT timers is enabled. + * - 1 - Clock for standard PIT timers is disabled. + */ +/*@{*/ +#define BP_PIT_MCR_MDIS (1U) /*!< Bit position for PIT_MCR_MDIS. */ +#define BM_PIT_MCR_MDIS (0x00000002U) /*!< Bit mask for PIT_MCR_MDIS. */ +#define BS_PIT_MCR_MDIS (1U) /*!< Bit field size in bits for PIT_MCR_MDIS. */ + +/*! @brief Read current value of the PIT_MCR_MDIS field. */ +#define BR_PIT_MCR_MDIS(x) (BITBAND_ACCESS32(HW_PIT_MCR_ADDR(x), BP_PIT_MCR_MDIS)) + +/*! @brief Format value for bitfield PIT_MCR_MDIS. */ +#define BF_PIT_MCR_MDIS(v) ((uint32_t)((uint32_t)(v) << BP_PIT_MCR_MDIS) & BM_PIT_MCR_MDIS) + +/*! @brief Set the MDIS field to a new value. */ +#define BW_PIT_MCR_MDIS(x, v) (BITBAND_ACCESS32(HW_PIT_MCR_ADDR(x), BP_PIT_MCR_MDIS) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_PIT_LDVALn - Timer Load Value Register + ******************************************************************************/ + +/*! + * @brief HW_PIT_LDVALn - Timer Load Value Register (RW) + * + * Reset value: 0x00000000U + * + * These registers select the timeout period for the timer interrupts. + */ +typedef union _hw_pit_ldvaln +{ + uint32_t U; + struct _hw_pit_ldvaln_bitfields + { + uint32_t TSV : 32; /*!< [31:0] Timer Start Value */ + } B; +} hw_pit_ldvaln_t; + +/*! + * @name Constants and macros for entire PIT_LDVALn register + */ +/*@{*/ +#define HW_PIT_LDVALn_COUNT (4U) + +#define HW_PIT_LDVALn_ADDR(x, n) ((x) + 0x100U + (0x10U * (n))) + +#define HW_PIT_LDVALn(x, n) (*(__IO hw_pit_ldvaln_t *) HW_PIT_LDVALn_ADDR(x, n)) +#define HW_PIT_LDVALn_RD(x, n) (HW_PIT_LDVALn(x, n).U) +#define HW_PIT_LDVALn_WR(x, n, v) (HW_PIT_LDVALn(x, n).U = (v)) +#define HW_PIT_LDVALn_SET(x, n, v) (HW_PIT_LDVALn_WR(x, n, HW_PIT_LDVALn_RD(x, n) | (v))) +#define HW_PIT_LDVALn_CLR(x, n, v) (HW_PIT_LDVALn_WR(x, n, HW_PIT_LDVALn_RD(x, n) & ~(v))) +#define HW_PIT_LDVALn_TOG(x, n, v) (HW_PIT_LDVALn_WR(x, n, HW_PIT_LDVALn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PIT_LDVALn bitfields + */ + +/*! + * @name Register PIT_LDVALn, field TSV[31:0] (RW) + * + * Sets the timer start value. The timer will count down until it reaches 0, + * then it will generate an interrupt and load this register value again. Writing a + * new value to this register will not restart the timer; instead the value will + * be loaded after the timer expires. To abort the current cycle and start a + * timer period with the new value, the timer must be disabled and enabled again. + */ +/*@{*/ +#define BP_PIT_LDVALn_TSV (0U) /*!< Bit position for PIT_LDVALn_TSV. */ +#define BM_PIT_LDVALn_TSV (0xFFFFFFFFU) /*!< Bit mask for PIT_LDVALn_TSV. */ +#define BS_PIT_LDVALn_TSV (32U) /*!< Bit field size in bits for PIT_LDVALn_TSV. */ + +/*! @brief Read current value of the PIT_LDVALn_TSV field. */ +#define BR_PIT_LDVALn_TSV(x, n) (HW_PIT_LDVALn(x, n).U) + +/*! @brief Format value for bitfield PIT_LDVALn_TSV. */ +#define BF_PIT_LDVALn_TSV(v) ((uint32_t)((uint32_t)(v) << BP_PIT_LDVALn_TSV) & BM_PIT_LDVALn_TSV) + +/*! @brief Set the TSV field to a new value. */ +#define BW_PIT_LDVALn_TSV(x, n, v) (HW_PIT_LDVALn_WR(x, n, v)) +/*@}*/ +/******************************************************************************* + * HW_PIT_CVALn - Current Timer Value Register + ******************************************************************************/ + +/*! + * @brief HW_PIT_CVALn - Current Timer Value Register (RO) + * + * Reset value: 0x00000000U + * + * These registers indicate the current timer position. + */ +typedef union _hw_pit_cvaln +{ + uint32_t U; + struct _hw_pit_cvaln_bitfields + { + uint32_t TVL : 32; /*!< [31:0] Current Timer Value */ + } B; +} hw_pit_cvaln_t; + +/*! + * @name Constants and macros for entire PIT_CVALn register + */ +/*@{*/ +#define HW_PIT_CVALn_COUNT (4U) + +#define HW_PIT_CVALn_ADDR(x, n) ((x) + 0x104U + (0x10U * (n))) + +#define HW_PIT_CVALn(x, n) (*(__I hw_pit_cvaln_t *) HW_PIT_CVALn_ADDR(x, n)) +#define HW_PIT_CVALn_RD(x, n) (HW_PIT_CVALn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual PIT_CVALn bitfields + */ + +/*! + * @name Register PIT_CVALn, field TVL[31:0] (RO) + * + * Represents the current timer value, if the timer is enabled. If the timer is + * disabled, do not use this field as its value is unreliable. The timer uses a + * downcounter. The timer values are frozen in Debug mode if MCR[FRZ] is set. + */ +/*@{*/ +#define BP_PIT_CVALn_TVL (0U) /*!< Bit position for PIT_CVALn_TVL. */ +#define BM_PIT_CVALn_TVL (0xFFFFFFFFU) /*!< Bit mask for PIT_CVALn_TVL. */ +#define BS_PIT_CVALn_TVL (32U) /*!< Bit field size in bits for PIT_CVALn_TVL. */ + +/*! @brief Read current value of the PIT_CVALn_TVL field. */ +#define BR_PIT_CVALn_TVL(x, n) (HW_PIT_CVALn(x, n).U) +/*@}*/ +/******************************************************************************* + * HW_PIT_TCTRLn - Timer Control Register + ******************************************************************************/ + +/*! + * @brief HW_PIT_TCTRLn - Timer Control Register (RW) + * + * Reset value: 0x00000000U + * + * These registers contain the control bits for each timer. + */ +typedef union _hw_pit_tctrln +{ + uint32_t U; + struct _hw_pit_tctrln_bitfields + { + uint32_t TEN : 1; /*!< [0] Timer Enable */ + uint32_t TIE : 1; /*!< [1] Timer Interrupt Enable */ + uint32_t CHN : 1; /*!< [2] Chain Mode */ + uint32_t RESERVED0 : 29; /*!< [31:3] */ + } B; +} hw_pit_tctrln_t; + +/*! + * @name Constants and macros for entire PIT_TCTRLn register + */ +/*@{*/ +#define HW_PIT_TCTRLn_COUNT (4U) + +#define HW_PIT_TCTRLn_ADDR(x, n) ((x) + 0x108U + (0x10U * (n))) + +#define HW_PIT_TCTRLn(x, n) (*(__IO hw_pit_tctrln_t *) HW_PIT_TCTRLn_ADDR(x, n)) +#define HW_PIT_TCTRLn_RD(x, n) (HW_PIT_TCTRLn(x, n).U) +#define HW_PIT_TCTRLn_WR(x, n, v) (HW_PIT_TCTRLn(x, n).U = (v)) +#define HW_PIT_TCTRLn_SET(x, n, v) (HW_PIT_TCTRLn_WR(x, n, HW_PIT_TCTRLn_RD(x, n) | (v))) +#define HW_PIT_TCTRLn_CLR(x, n, v) (HW_PIT_TCTRLn_WR(x, n, HW_PIT_TCTRLn_RD(x, n) & ~(v))) +#define HW_PIT_TCTRLn_TOG(x, n, v) (HW_PIT_TCTRLn_WR(x, n, HW_PIT_TCTRLn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PIT_TCTRLn bitfields + */ + +/*! + * @name Register PIT_TCTRLn, field TEN[0] (RW) + * + * Enables or disables the timer. + * + * Values: + * - 0 - Timer n is disabled. + * - 1 - Timer n is enabled. + */ +/*@{*/ +#define BP_PIT_TCTRLn_TEN (0U) /*!< Bit position for PIT_TCTRLn_TEN. */ +#define BM_PIT_TCTRLn_TEN (0x00000001U) /*!< Bit mask for PIT_TCTRLn_TEN. */ +#define BS_PIT_TCTRLn_TEN (1U) /*!< Bit field size in bits for PIT_TCTRLn_TEN. */ + +/*! @brief Read current value of the PIT_TCTRLn_TEN field. */ +#define BR_PIT_TCTRLn_TEN(x, n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_TEN)) + +/*! @brief Format value for bitfield PIT_TCTRLn_TEN. */ +#define BF_PIT_TCTRLn_TEN(v) ((uint32_t)((uint32_t)(v) << BP_PIT_TCTRLn_TEN) & BM_PIT_TCTRLn_TEN) + +/*! @brief Set the TEN field to a new value. */ +#define BW_PIT_TCTRLn_TEN(x, n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_TEN) = (v)) +/*@}*/ + +/*! + * @name Register PIT_TCTRLn, field TIE[1] (RW) + * + * When an interrupt is pending, or, TFLGn[TIF] is set, enabling the interrupt + * will immediately cause an interrupt event. To avoid this, the associated + * TFLGn[TIF] must be cleared first. + * + * Values: + * - 0 - Interrupt requests from Timer n are disabled. + * - 1 - Interrupt will be requested whenever TIF is set. + */ +/*@{*/ +#define BP_PIT_TCTRLn_TIE (1U) /*!< Bit position for PIT_TCTRLn_TIE. */ +#define BM_PIT_TCTRLn_TIE (0x00000002U) /*!< Bit mask for PIT_TCTRLn_TIE. */ +#define BS_PIT_TCTRLn_TIE (1U) /*!< Bit field size in bits for PIT_TCTRLn_TIE. */ + +/*! @brief Read current value of the PIT_TCTRLn_TIE field. */ +#define BR_PIT_TCTRLn_TIE(x, n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_TIE)) + +/*! @brief Format value for bitfield PIT_TCTRLn_TIE. */ +#define BF_PIT_TCTRLn_TIE(v) ((uint32_t)((uint32_t)(v) << BP_PIT_TCTRLn_TIE) & BM_PIT_TCTRLn_TIE) + +/*! @brief Set the TIE field to a new value. */ +#define BW_PIT_TCTRLn_TIE(x, n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_TIE) = (v)) +/*@}*/ + +/*! + * @name Register PIT_TCTRLn, field CHN[2] (RW) + * + * When activated, Timer n-1 needs to expire before timer n can decrement by 1. + * Timer 0 cannot be chained. + * + * Values: + * - 0 - Timer is not chained. + * - 1 - Timer is chained to previous timer. For example, for Channel 2, if this + * field is set, Timer 2 is chained to Timer 1. + */ +/*@{*/ +#define BP_PIT_TCTRLn_CHN (2U) /*!< Bit position for PIT_TCTRLn_CHN. */ +#define BM_PIT_TCTRLn_CHN (0x00000004U) /*!< Bit mask for PIT_TCTRLn_CHN. */ +#define BS_PIT_TCTRLn_CHN (1U) /*!< Bit field size in bits for PIT_TCTRLn_CHN. */ + +/*! @brief Read current value of the PIT_TCTRLn_CHN field. */ +#define BR_PIT_TCTRLn_CHN(x, n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_CHN)) + +/*! @brief Format value for bitfield PIT_TCTRLn_CHN. */ +#define BF_PIT_TCTRLn_CHN(v) ((uint32_t)((uint32_t)(v) << BP_PIT_TCTRLn_CHN) & BM_PIT_TCTRLn_CHN) + +/*! @brief Set the CHN field to a new value. */ +#define BW_PIT_TCTRLn_CHN(x, n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(x, n), BP_PIT_TCTRLn_CHN) = (v)) +/*@}*/ +/******************************************************************************* + * HW_PIT_TFLGn - Timer Flag Register + ******************************************************************************/ + +/*! + * @brief HW_PIT_TFLGn - Timer Flag Register (RW) + * + * Reset value: 0x00000000U + * + * These registers hold the PIT interrupt flags. + */ +typedef union _hw_pit_tflgn +{ + uint32_t U; + struct _hw_pit_tflgn_bitfields + { + uint32_t TIF : 1; /*!< [0] Timer Interrupt Flag */ + uint32_t RESERVED0 : 31; /*!< [31:1] */ + } B; +} hw_pit_tflgn_t; + +/*! + * @name Constants and macros for entire PIT_TFLGn register + */ +/*@{*/ +#define HW_PIT_TFLGn_COUNT (4U) + +#define HW_PIT_TFLGn_ADDR(x, n) ((x) + 0x10CU + (0x10U * (n))) + +#define HW_PIT_TFLGn(x, n) (*(__IO hw_pit_tflgn_t *) HW_PIT_TFLGn_ADDR(x, n)) +#define HW_PIT_TFLGn_RD(x, n) (HW_PIT_TFLGn(x, n).U) +#define HW_PIT_TFLGn_WR(x, n, v) (HW_PIT_TFLGn(x, n).U = (v)) +#define HW_PIT_TFLGn_SET(x, n, v) (HW_PIT_TFLGn_WR(x, n, HW_PIT_TFLGn_RD(x, n) | (v))) +#define HW_PIT_TFLGn_CLR(x, n, v) (HW_PIT_TFLGn_WR(x, n, HW_PIT_TFLGn_RD(x, n) & ~(v))) +#define HW_PIT_TFLGn_TOG(x, n, v) (HW_PIT_TFLGn_WR(x, n, HW_PIT_TFLGn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PIT_TFLGn bitfields + */ + +/*! + * @name Register PIT_TFLGn, field TIF[0] (W1C) + * + * Sets to 1 at the end of the timer period. Writing 1 to this flag clears it. + * Writing 0 has no effect. If enabled, or, when TCTRLn[TIE] = 1, TIF causes an + * interrupt request. + * + * Values: + * - 0 - Timeout has not yet occurred. + * - 1 - Timeout has occurred. + */ +/*@{*/ +#define BP_PIT_TFLGn_TIF (0U) /*!< Bit position for PIT_TFLGn_TIF. */ +#define BM_PIT_TFLGn_TIF (0x00000001U) /*!< Bit mask for PIT_TFLGn_TIF. */ +#define BS_PIT_TFLGn_TIF (1U) /*!< Bit field size in bits for PIT_TFLGn_TIF. */ + +/*! @brief Read current value of the PIT_TFLGn_TIF field. */ +#define BR_PIT_TFLGn_TIF(x, n) (BITBAND_ACCESS32(HW_PIT_TFLGn_ADDR(x, n), BP_PIT_TFLGn_TIF)) + +/*! @brief Format value for bitfield PIT_TFLGn_TIF. */ +#define BF_PIT_TFLGn_TIF(v) ((uint32_t)((uint32_t)(v) << BP_PIT_TFLGn_TIF) & BM_PIT_TFLGn_TIF) + +/*! @brief Set the TIF field to a new value. */ +#define BW_PIT_TFLGn_TIF(x, n, v) (BITBAND_ACCESS32(HW_PIT_TFLGn_ADDR(x, n), BP_PIT_TFLGn_TIF) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_pit_t - module struct + ******************************************************************************/ +/*! + * @brief All PIT module registers. + */ +#pragma pack(1) +typedef struct _hw_pit +{ + __IO hw_pit_mcr_t MCR; /*!< [0x0] PIT Module Control Register */ + uint8_t _reserved0[252]; + struct { + __IO hw_pit_ldvaln_t LDVALn; /*!< [0x100] Timer Load Value Register */ + __I hw_pit_cvaln_t CVALn; /*!< [0x104] Current Timer Value Register */ + __IO hw_pit_tctrln_t TCTRLn; /*!< [0x108] Timer Control Register */ + __IO hw_pit_tflgn_t TFLGn; /*!< [0x10C] Timer Flag Register */ + } CHANNEL[4]; +} hw_pit_t; +#pragma pack() + +/*! @brief Macro to access all PIT registers. */ +/*! @param x PIT module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_PIT(PIT_BASE)</code>. */ +#define HW_PIT(x) (*(hw_pit_t *)(x)) + +#endif /* __HW_PIT_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pmc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pmc.h new file mode 100644 index 0000000000..ceb62974cd --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_pmc.h @@ -0,0 +1,572 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_PMC_REGISTERS_H__ +#define __HW_PMC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 PMC + * + * Power Management Controller + * + * Registers defined in this header file: + * - HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register + * - HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register + * - HW_PMC_REGSC - Regulator Status And Control register + * + * - hw_pmc_t - Struct containing all module registers. + */ + +#define HW_PMC_INSTANCE_COUNT (1U) /*!< Number of instances of the PMC module. */ + +/******************************************************************************* + * HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register + ******************************************************************************/ + +/*! + * @brief HW_PMC_LVDSC1 - Low Voltage Detect Status And Control 1 register (RW) + * + * Reset value: 0x10U + * + * This register contains status and control bits to support the low voltage + * detect function. This register should be written during the reset initialization + * program to set the desired controls even if the desired settings are the same + * as the reset settings. While the device is in the very low power or low + * leakage modes, the LVD system is disabled regardless of LVDSC1 settings. To protect + * systems that must have LVD always on, configure the Power Mode Protection + * (PMPROT) register of the SMC module (SMC_PMPROT) to disallow any very low power or + * low leakage modes from being enabled. See the device's data sheet for the + * exact LVD trip voltages. The LVDV bits are reset solely on a POR Only event. The + * register's other bits are reset on Chip Reset Not VLLS. For more information + * about these reset types, refer to the Reset section details. + */ +typedef union _hw_pmc_lvdsc1 +{ + uint8_t U; + struct _hw_pmc_lvdsc1_bitfields + { + uint8_t LVDV : 2; /*!< [1:0] Low-Voltage Detect Voltage Select */ + uint8_t RESERVED0 : 2; /*!< [3:2] */ + uint8_t LVDRE : 1; /*!< [4] Low-Voltage Detect Reset Enable */ + uint8_t LVDIE : 1; /*!< [5] Low-Voltage Detect Interrupt Enable */ + uint8_t LVDACK : 1; /*!< [6] Low-Voltage Detect Acknowledge */ + uint8_t LVDF : 1; /*!< [7] Low-Voltage Detect Flag */ + } B; +} hw_pmc_lvdsc1_t; + +/*! + * @name Constants and macros for entire PMC_LVDSC1 register + */ +/*@{*/ +#define HW_PMC_LVDSC1_ADDR(x) ((x) + 0x0U) + +#define HW_PMC_LVDSC1(x) (*(__IO hw_pmc_lvdsc1_t *) HW_PMC_LVDSC1_ADDR(x)) +#define HW_PMC_LVDSC1_RD(x) (HW_PMC_LVDSC1(x).U) +#define HW_PMC_LVDSC1_WR(x, v) (HW_PMC_LVDSC1(x).U = (v)) +#define HW_PMC_LVDSC1_SET(x, v) (HW_PMC_LVDSC1_WR(x, HW_PMC_LVDSC1_RD(x) | (v))) +#define HW_PMC_LVDSC1_CLR(x, v) (HW_PMC_LVDSC1_WR(x, HW_PMC_LVDSC1_RD(x) & ~(v))) +#define HW_PMC_LVDSC1_TOG(x, v) (HW_PMC_LVDSC1_WR(x, HW_PMC_LVDSC1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PMC_LVDSC1 bitfields + */ + +/*! + * @name Register PMC_LVDSC1, field LVDV[1:0] (RW) + * + * Selects the LVD trip point voltage (V LVD ). + * + * Values: + * - 00 - Low trip point selected (V LVD = V LVDL ) + * - 01 - High trip point selected (V LVD = V LVDH ) + * - 10 - Reserved + * - 11 - Reserved + */ +/*@{*/ +#define BP_PMC_LVDSC1_LVDV (0U) /*!< Bit position for PMC_LVDSC1_LVDV. */ +#define BM_PMC_LVDSC1_LVDV (0x03U) /*!< Bit mask for PMC_LVDSC1_LVDV. */ +#define BS_PMC_LVDSC1_LVDV (2U) /*!< Bit field size in bits for PMC_LVDSC1_LVDV. */ + +/*! @brief Read current value of the PMC_LVDSC1_LVDV field. */ +#define BR_PMC_LVDSC1_LVDV(x) (HW_PMC_LVDSC1(x).B.LVDV) + +/*! @brief Format value for bitfield PMC_LVDSC1_LVDV. */ +#define BF_PMC_LVDSC1_LVDV(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC1_LVDV) & BM_PMC_LVDSC1_LVDV) + +/*! @brief Set the LVDV field to a new value. */ +#define BW_PMC_LVDSC1_LVDV(x, v) (HW_PMC_LVDSC1_WR(x, (HW_PMC_LVDSC1_RD(x) & ~BM_PMC_LVDSC1_LVDV) | BF_PMC_LVDSC1_LVDV(v))) +/*@}*/ + +/*! + * @name Register PMC_LVDSC1, field LVDRE[4] (RW) + * + * This write-once bit enables LVDF events to generate a hardware reset. + * Additional writes are ignored. + * + * Values: + * - 0 - LVDF does not generate hardware resets + * - 1 - Force an MCU reset when LVDF = 1 + */ +/*@{*/ +#define BP_PMC_LVDSC1_LVDRE (4U) /*!< Bit position for PMC_LVDSC1_LVDRE. */ +#define BM_PMC_LVDSC1_LVDRE (0x10U) /*!< Bit mask for PMC_LVDSC1_LVDRE. */ +#define BS_PMC_LVDSC1_LVDRE (1U) /*!< Bit field size in bits for PMC_LVDSC1_LVDRE. */ + +/*! @brief Read current value of the PMC_LVDSC1_LVDRE field. */ +#define BR_PMC_LVDSC1_LVDRE(x) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDRE)) + +/*! @brief Format value for bitfield PMC_LVDSC1_LVDRE. */ +#define BF_PMC_LVDSC1_LVDRE(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC1_LVDRE) & BM_PMC_LVDSC1_LVDRE) + +/*! @brief Set the LVDRE field to a new value. */ +#define BW_PMC_LVDSC1_LVDRE(x, v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDRE) = (v)) +/*@}*/ + +/*! + * @name Register PMC_LVDSC1, field LVDIE[5] (RW) + * + * Enables hardware interrupt requests for LVDF. + * + * Values: + * - 0 - Hardware interrupt disabled (use polling) + * - 1 - Request a hardware interrupt when LVDF = 1 + */ +/*@{*/ +#define BP_PMC_LVDSC1_LVDIE (5U) /*!< Bit position for PMC_LVDSC1_LVDIE. */ +#define BM_PMC_LVDSC1_LVDIE (0x20U) /*!< Bit mask for PMC_LVDSC1_LVDIE. */ +#define BS_PMC_LVDSC1_LVDIE (1U) /*!< Bit field size in bits for PMC_LVDSC1_LVDIE. */ + +/*! @brief Read current value of the PMC_LVDSC1_LVDIE field. */ +#define BR_PMC_LVDSC1_LVDIE(x) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDIE)) + +/*! @brief Format value for bitfield PMC_LVDSC1_LVDIE. */ +#define BF_PMC_LVDSC1_LVDIE(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC1_LVDIE) & BM_PMC_LVDSC1_LVDIE) + +/*! @brief Set the LVDIE field to a new value. */ +#define BW_PMC_LVDSC1_LVDIE(x, v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDIE) = (v)) +/*@}*/ + +/*! + * @name Register PMC_LVDSC1, field LVDACK[6] (WORZ) + * + * This write-only field is used to acknowledge low voltage detection errors. + * Write 1 to clear LVDF. Reads always return 0. + */ +/*@{*/ +#define BP_PMC_LVDSC1_LVDACK (6U) /*!< Bit position for PMC_LVDSC1_LVDACK. */ +#define BM_PMC_LVDSC1_LVDACK (0x40U) /*!< Bit mask for PMC_LVDSC1_LVDACK. */ +#define BS_PMC_LVDSC1_LVDACK (1U) /*!< Bit field size in bits for PMC_LVDSC1_LVDACK. */ + +/*! @brief Format value for bitfield PMC_LVDSC1_LVDACK. */ +#define BF_PMC_LVDSC1_LVDACK(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC1_LVDACK) & BM_PMC_LVDSC1_LVDACK) + +/*! @brief Set the LVDACK field to a new value. */ +#define BW_PMC_LVDSC1_LVDACK(x, v) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDACK) = (v)) +/*@}*/ + +/*! + * @name Register PMC_LVDSC1, field LVDF[7] (RO) + * + * This read-only status field indicates a low-voltage detect event. + * + * Values: + * - 0 - Low-voltage event not detected + * - 1 - Low-voltage event detected + */ +/*@{*/ +#define BP_PMC_LVDSC1_LVDF (7U) /*!< Bit position for PMC_LVDSC1_LVDF. */ +#define BM_PMC_LVDSC1_LVDF (0x80U) /*!< Bit mask for PMC_LVDSC1_LVDF. */ +#define BS_PMC_LVDSC1_LVDF (1U) /*!< Bit field size in bits for PMC_LVDSC1_LVDF. */ + +/*! @brief Read current value of the PMC_LVDSC1_LVDF field. */ +#define BR_PMC_LVDSC1_LVDF(x) (BITBAND_ACCESS8(HW_PMC_LVDSC1_ADDR(x), BP_PMC_LVDSC1_LVDF)) +/*@}*/ + +/******************************************************************************* + * HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register + ******************************************************************************/ + +/*! + * @brief HW_PMC_LVDSC2 - Low Voltage Detect Status And Control 2 register (RW) + * + * Reset value: 0x00U + * + * This register contains status and control bits to support the low voltage + * warning function. While the device is in the very low power or low leakage modes, + * the LVD system is disabled regardless of LVDSC2 settings. See the device's + * data sheet for the exact LVD trip voltages. The LVW trip voltages depend on LVWV + * and LVDV. LVWV is reset solely on a POR Only event. The other fields of the + * register are reset on Chip Reset Not VLLS. For more information about these + * reset types, refer to the Reset section details. + */ +typedef union _hw_pmc_lvdsc2 +{ + uint8_t U; + struct _hw_pmc_lvdsc2_bitfields + { + uint8_t LVWV : 2; /*!< [1:0] Low-Voltage Warning Voltage Select */ + uint8_t RESERVED0 : 3; /*!< [4:2] */ + uint8_t LVWIE : 1; /*!< [5] Low-Voltage Warning Interrupt Enable */ + uint8_t LVWACK : 1; /*!< [6] Low-Voltage Warning Acknowledge */ + uint8_t LVWF : 1; /*!< [7] Low-Voltage Warning Flag */ + } B; +} hw_pmc_lvdsc2_t; + +/*! + * @name Constants and macros for entire PMC_LVDSC2 register + */ +/*@{*/ +#define HW_PMC_LVDSC2_ADDR(x) ((x) + 0x1U) + +#define HW_PMC_LVDSC2(x) (*(__IO hw_pmc_lvdsc2_t *) HW_PMC_LVDSC2_ADDR(x)) +#define HW_PMC_LVDSC2_RD(x) (HW_PMC_LVDSC2(x).U) +#define HW_PMC_LVDSC2_WR(x, v) (HW_PMC_LVDSC2(x).U = (v)) +#define HW_PMC_LVDSC2_SET(x, v) (HW_PMC_LVDSC2_WR(x, HW_PMC_LVDSC2_RD(x) | (v))) +#define HW_PMC_LVDSC2_CLR(x, v) (HW_PMC_LVDSC2_WR(x, HW_PMC_LVDSC2_RD(x) & ~(v))) +#define HW_PMC_LVDSC2_TOG(x, v) (HW_PMC_LVDSC2_WR(x, HW_PMC_LVDSC2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PMC_LVDSC2 bitfields + */ + +/*! + * @name Register PMC_LVDSC2, field LVWV[1:0] (RW) + * + * Selects the LVW trip point voltage (VLVW). The actual voltage for the warning + * depends on LVDSC1[LVDV]. + * + * Values: + * - 00 - Low trip point selected (VLVW = VLVW1) + * - 01 - Mid 1 trip point selected (VLVW = VLVW2) + * - 10 - Mid 2 trip point selected (VLVW = VLVW3) + * - 11 - High trip point selected (VLVW = VLVW4) + */ +/*@{*/ +#define BP_PMC_LVDSC2_LVWV (0U) /*!< Bit position for PMC_LVDSC2_LVWV. */ +#define BM_PMC_LVDSC2_LVWV (0x03U) /*!< Bit mask for PMC_LVDSC2_LVWV. */ +#define BS_PMC_LVDSC2_LVWV (2U) /*!< Bit field size in bits for PMC_LVDSC2_LVWV. */ + +/*! @brief Read current value of the PMC_LVDSC2_LVWV field. */ +#define BR_PMC_LVDSC2_LVWV(x) (HW_PMC_LVDSC2(x).B.LVWV) + +/*! @brief Format value for bitfield PMC_LVDSC2_LVWV. */ +#define BF_PMC_LVDSC2_LVWV(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC2_LVWV) & BM_PMC_LVDSC2_LVWV) + +/*! @brief Set the LVWV field to a new value. */ +#define BW_PMC_LVDSC2_LVWV(x, v) (HW_PMC_LVDSC2_WR(x, (HW_PMC_LVDSC2_RD(x) & ~BM_PMC_LVDSC2_LVWV) | BF_PMC_LVDSC2_LVWV(v))) +/*@}*/ + +/*! + * @name Register PMC_LVDSC2, field LVWIE[5] (RW) + * + * Enables hardware interrupt requests for LVWF. + * + * Values: + * - 0 - Hardware interrupt disabled (use polling) + * - 1 - Request a hardware interrupt when LVWF = 1 + */ +/*@{*/ +#define BP_PMC_LVDSC2_LVWIE (5U) /*!< Bit position for PMC_LVDSC2_LVWIE. */ +#define BM_PMC_LVDSC2_LVWIE (0x20U) /*!< Bit mask for PMC_LVDSC2_LVWIE. */ +#define BS_PMC_LVDSC2_LVWIE (1U) /*!< Bit field size in bits for PMC_LVDSC2_LVWIE. */ + +/*! @brief Read current value of the PMC_LVDSC2_LVWIE field. */ +#define BR_PMC_LVDSC2_LVWIE(x) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR(x), BP_PMC_LVDSC2_LVWIE)) + +/*! @brief Format value for bitfield PMC_LVDSC2_LVWIE. */ +#define BF_PMC_LVDSC2_LVWIE(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC2_LVWIE) & BM_PMC_LVDSC2_LVWIE) + +/*! @brief Set the LVWIE field to a new value. */ +#define BW_PMC_LVDSC2_LVWIE(x, v) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR(x), BP_PMC_LVDSC2_LVWIE) = (v)) +/*@}*/ + +/*! + * @name Register PMC_LVDSC2, field LVWACK[6] (WORZ) + * + * This write-only field is used to acknowledge low voltage warning errors. + * Write 1 to clear LVWF. Reads always return 0. + */ +/*@{*/ +#define BP_PMC_LVDSC2_LVWACK (6U) /*!< Bit position for PMC_LVDSC2_LVWACK. */ +#define BM_PMC_LVDSC2_LVWACK (0x40U) /*!< Bit mask for PMC_LVDSC2_LVWACK. */ +#define BS_PMC_LVDSC2_LVWACK (1U) /*!< Bit field size in bits for PMC_LVDSC2_LVWACK. */ + +/*! @brief Format value for bitfield PMC_LVDSC2_LVWACK. */ +#define BF_PMC_LVDSC2_LVWACK(v) ((uint8_t)((uint8_t)(v) << BP_PMC_LVDSC2_LVWACK) & BM_PMC_LVDSC2_LVWACK) + +/*! @brief Set the LVWACK field to a new value. */ +#define BW_PMC_LVDSC2_LVWACK(x, v) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR(x), BP_PMC_LVDSC2_LVWACK) = (v)) +/*@}*/ + +/*! + * @name Register PMC_LVDSC2, field LVWF[7] (RO) + * + * This read-only status field indicates a low-voltage warning event. LVWF is + * set when VSupply transitions below the trip point, or after reset and VSupply is + * already below VLVW. LVWF may be 1 after power-on reset, therefore, to use LVW + * interrupt function, before enabling LVWIE, LVWF must be cleared by writing + * LVWACK first. + * + * Values: + * - 0 - Low-voltage warning event not detected + * - 1 - Low-voltage warning event detected + */ +/*@{*/ +#define BP_PMC_LVDSC2_LVWF (7U) /*!< Bit position for PMC_LVDSC2_LVWF. */ +#define BM_PMC_LVDSC2_LVWF (0x80U) /*!< Bit mask for PMC_LVDSC2_LVWF. */ +#define BS_PMC_LVDSC2_LVWF (1U) /*!< Bit field size in bits for PMC_LVDSC2_LVWF. */ + +/*! @brief Read current value of the PMC_LVDSC2_LVWF field. */ +#define BR_PMC_LVDSC2_LVWF(x) (BITBAND_ACCESS8(HW_PMC_LVDSC2_ADDR(x), BP_PMC_LVDSC2_LVWF)) +/*@}*/ + +/******************************************************************************* + * HW_PMC_REGSC - Regulator Status And Control register + ******************************************************************************/ + +/*! + * @brief HW_PMC_REGSC - Regulator Status And Control register (RW) + * + * Reset value: 0x04U + * + * The PMC contains an internal voltage regulator. The voltage regulator design + * uses a bandgap reference that is also available through a buffer as input to + * certain internal peripherals, such as the CMP and ADC. The internal regulator + * provides a status bit (REGONS) indicating the regulator is in run regulation. + * This register is reset on Chip Reset Not VLLS and by reset types that trigger + * Chip Reset not VLLS. See the Reset section details for more information. + */ +typedef union _hw_pmc_regsc +{ + uint8_t U; + struct _hw_pmc_regsc_bitfields + { + uint8_t BGBE : 1; /*!< [0] Bandgap Buffer Enable */ + uint8_t RESERVED0 : 1; /*!< [1] */ + uint8_t REGONS : 1; /*!< [2] Regulator In Run Regulation Status */ + uint8_t ACKISO : 1; /*!< [3] Acknowledge Isolation */ + uint8_t BGEN : 1; /*!< [4] Bandgap Enable In VLPx Operation */ + uint8_t RESERVED1 : 3; /*!< [7:5] */ + } B; +} hw_pmc_regsc_t; + +/*! + * @name Constants and macros for entire PMC_REGSC register + */ +/*@{*/ +#define HW_PMC_REGSC_ADDR(x) ((x) + 0x2U) + +#define HW_PMC_REGSC(x) (*(__IO hw_pmc_regsc_t *) HW_PMC_REGSC_ADDR(x)) +#define HW_PMC_REGSC_RD(x) (HW_PMC_REGSC(x).U) +#define HW_PMC_REGSC_WR(x, v) (HW_PMC_REGSC(x).U = (v)) +#define HW_PMC_REGSC_SET(x, v) (HW_PMC_REGSC_WR(x, HW_PMC_REGSC_RD(x) | (v))) +#define HW_PMC_REGSC_CLR(x, v) (HW_PMC_REGSC_WR(x, HW_PMC_REGSC_RD(x) & ~(v))) +#define HW_PMC_REGSC_TOG(x, v) (HW_PMC_REGSC_WR(x, HW_PMC_REGSC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PMC_REGSC bitfields + */ + +/*! + * @name Register PMC_REGSC, field BGBE[0] (RW) + * + * Enables the bandgap buffer. + * + * Values: + * - 0 - Bandgap buffer not enabled + * - 1 - Bandgap buffer enabled + */ +/*@{*/ +#define BP_PMC_REGSC_BGBE (0U) /*!< Bit position for PMC_REGSC_BGBE. */ +#define BM_PMC_REGSC_BGBE (0x01U) /*!< Bit mask for PMC_REGSC_BGBE. */ +#define BS_PMC_REGSC_BGBE (1U) /*!< Bit field size in bits for PMC_REGSC_BGBE. */ + +/*! @brief Read current value of the PMC_REGSC_BGBE field. */ +#define BR_PMC_REGSC_BGBE(x) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_BGBE)) + +/*! @brief Format value for bitfield PMC_REGSC_BGBE. */ +#define BF_PMC_REGSC_BGBE(v) ((uint8_t)((uint8_t)(v) << BP_PMC_REGSC_BGBE) & BM_PMC_REGSC_BGBE) + +/*! @brief Set the BGBE field to a new value. */ +#define BW_PMC_REGSC_BGBE(x, v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_BGBE) = (v)) +/*@}*/ + +/*! + * @name Register PMC_REGSC, field REGONS[2] (RO) + * + * This read-only field provides the current status of the internal voltage + * regulator. + * + * Values: + * - 0 - Regulator is in stop regulation or in transition to/from it + * - 1 - Regulator is in run regulation + */ +/*@{*/ +#define BP_PMC_REGSC_REGONS (2U) /*!< Bit position for PMC_REGSC_REGONS. */ +#define BM_PMC_REGSC_REGONS (0x04U) /*!< Bit mask for PMC_REGSC_REGONS. */ +#define BS_PMC_REGSC_REGONS (1U) /*!< Bit field size in bits for PMC_REGSC_REGONS. */ + +/*! @brief Read current value of the PMC_REGSC_REGONS field. */ +#define BR_PMC_REGSC_REGONS(x) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_REGONS)) +/*@}*/ + +/*! + * @name Register PMC_REGSC, field ACKISO[3] (W1C) + * + * Reading this field indicates whether certain peripherals and the I/O pads are + * in a latched state as a result of having been in a VLLS mode. Writing 1 to + * this field when it is set releases the I/O pads and certain peripherals to their + * normal run mode state. After recovering from a VLLS mode, user should restore + * chip configuration before clearing ACKISO. In particular, pin configuration + * for enabled LLWU wakeup pins should be restored to avoid any LLWU flag from + * being falsely set when ACKISO is cleared. + * + * Values: + * - 0 - Peripherals and I/O pads are in normal run state. + * - 1 - Certain peripherals and I/O pads are in an isolated and latched state. + */ +/*@{*/ +#define BP_PMC_REGSC_ACKISO (3U) /*!< Bit position for PMC_REGSC_ACKISO. */ +#define BM_PMC_REGSC_ACKISO (0x08U) /*!< Bit mask for PMC_REGSC_ACKISO. */ +#define BS_PMC_REGSC_ACKISO (1U) /*!< Bit field size in bits for PMC_REGSC_ACKISO. */ + +/*! @brief Read current value of the PMC_REGSC_ACKISO field. */ +#define BR_PMC_REGSC_ACKISO(x) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_ACKISO)) + +/*! @brief Format value for bitfield PMC_REGSC_ACKISO. */ +#define BF_PMC_REGSC_ACKISO(v) ((uint8_t)((uint8_t)(v) << BP_PMC_REGSC_ACKISO) & BM_PMC_REGSC_ACKISO) + +/*! @brief Set the ACKISO field to a new value. */ +#define BW_PMC_REGSC_ACKISO(x, v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_ACKISO) = (v)) +/*@}*/ + +/*! + * @name Register PMC_REGSC, field BGEN[4] (RW) + * + * BGEN controls whether the bandgap is enabled in lower power modes of + * operation (VLPx, LLS, and VLLSx). When on-chip peripherals require the bandgap voltage + * reference in low power modes of operation, set BGEN to continue to enable the + * bandgap operation. When the bandgap voltage reference is not needed in low + * power modes, clear BGEN to avoid excess power consumption. + * + * Values: + * - 0 - Bandgap voltage reference is disabled in VLPx , LLS , and VLLSx modes. + * - 1 - Bandgap voltage reference is enabled in VLPx , LLS , and VLLSx modes. + */ +/*@{*/ +#define BP_PMC_REGSC_BGEN (4U) /*!< Bit position for PMC_REGSC_BGEN. */ +#define BM_PMC_REGSC_BGEN (0x10U) /*!< Bit mask for PMC_REGSC_BGEN. */ +#define BS_PMC_REGSC_BGEN (1U) /*!< Bit field size in bits for PMC_REGSC_BGEN. */ + +/*! @brief Read current value of the PMC_REGSC_BGEN field. */ +#define BR_PMC_REGSC_BGEN(x) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_BGEN)) + +/*! @brief Format value for bitfield PMC_REGSC_BGEN. */ +#define BF_PMC_REGSC_BGEN(v) ((uint8_t)((uint8_t)(v) << BP_PMC_REGSC_BGEN) & BM_PMC_REGSC_BGEN) + +/*! @brief Set the BGEN field to a new value. */ +#define BW_PMC_REGSC_BGEN(x, v) (BITBAND_ACCESS8(HW_PMC_REGSC_ADDR(x), BP_PMC_REGSC_BGEN) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_pmc_t - module struct + ******************************************************************************/ +/*! + * @brief All PMC module registers. + */ +#pragma pack(1) +typedef struct _hw_pmc +{ + __IO hw_pmc_lvdsc1_t LVDSC1; /*!< [0x0] Low Voltage Detect Status And Control 1 register */ + __IO hw_pmc_lvdsc2_t LVDSC2; /*!< [0x1] Low Voltage Detect Status And Control 2 register */ + __IO hw_pmc_regsc_t REGSC; /*!< [0x2] Regulator Status And Control register */ +} hw_pmc_t; +#pragma pack() + +/*! @brief Macro to access all PMC registers. */ +/*! @param x PMC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_PMC(PMC_BASE)</code>. */ +#define HW_PMC(x) (*(hw_pmc_t *)(x)) + +#endif /* __HW_PMC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_port.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_port.h new file mode 100644 index 0000000000..8c97a37ba3 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_port.h @@ -0,0 +1,892 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_PORT_REGISTERS_H__ +#define __HW_PORT_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 PORT + * + * Pin Control and Interrupts + * + * Registers defined in this header file: + * - HW_PORT_PCRn - Pin Control Register n + * - HW_PORT_GPCLR - Global Pin Control Low Register + * - HW_PORT_GPCHR - Global Pin Control High Register + * - HW_PORT_ISFR - Interrupt Status Flag Register + * - HW_PORT_DFER - Digital Filter Enable Register + * - HW_PORT_DFCR - Digital Filter Clock Register + * - HW_PORT_DFWR - Digital Filter Width Register + * + * - hw_port_t - Struct containing all module registers. + */ + +#define HW_PORT_INSTANCE_COUNT (5U) /*!< Number of instances of the PORT module. */ +#define HW_PORTA (0U) /*!< Instance number for PORTA. */ +#define HW_PORTB (1U) /*!< Instance number for PORTB. */ +#define HW_PORTC (2U) /*!< Instance number for PORTC. */ +#define HW_PORTD (3U) /*!< Instance number for PORTD. */ +#define HW_PORTE (4U) /*!< Instance number for PORTE. */ + +/******************************************************************************* + * HW_PORT_PCRn - Pin Control Register n + ******************************************************************************/ + +/*! + * @brief HW_PORT_PCRn - Pin Control Register n (RW) + * + * Reset value: 0x00000700U + * + * See the Signal Multiplexing and Pin Assignment chapter for the reset value of + * this device. See the GPIO Configuration section for details on the available + * functions for each pin. Do not modify pin configuration registers associated + * with pins not available in your selected package. All unbonded pins not + * available in your package will default to DISABLE state for lowest power consumption. + */ +typedef union _hw_port_pcrn +{ + uint32_t U; + struct _hw_port_pcrn_bitfields + { + uint32_t PS : 1; /*!< [0] Pull Select */ + uint32_t PE : 1; /*!< [1] Pull Enable */ + uint32_t SRE : 1; /*!< [2] Slew Rate Enable */ + uint32_t RESERVED0 : 1; /*!< [3] */ + uint32_t PFE : 1; /*!< [4] Passive Filter Enable */ + uint32_t ODE : 1; /*!< [5] Open Drain Enable */ + uint32_t DSE : 1; /*!< [6] Drive Strength Enable */ + uint32_t RESERVED1 : 1; /*!< [7] */ + uint32_t MUX : 3; /*!< [10:8] Pin Mux Control */ + uint32_t RESERVED2 : 4; /*!< [14:11] */ + uint32_t LK : 1; /*!< [15] Lock Register */ + uint32_t IRQC : 4; /*!< [19:16] Interrupt Configuration */ + uint32_t RESERVED3 : 4; /*!< [23:20] */ + uint32_t ISF : 1; /*!< [24] Interrupt Status Flag */ + uint32_t RESERVED4 : 7; /*!< [31:25] */ + } B; +} hw_port_pcrn_t; + +/*! + * @name Constants and macros for entire PORT_PCRn register + */ +/*@{*/ +#define HW_PORT_PCRn_COUNT (32U) + +#define HW_PORT_PCRn_ADDR(x, n) ((x) + 0x0U + (0x4U * (n))) + +#define HW_PORT_PCRn(x, n) (*(__IO hw_port_pcrn_t *) HW_PORT_PCRn_ADDR(x, n)) +#define HW_PORT_PCRn_RD(x, n) (HW_PORT_PCRn(x, n).U) +#define HW_PORT_PCRn_WR(x, n, v) (HW_PORT_PCRn(x, n).U = (v)) +#define HW_PORT_PCRn_SET(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) | (v))) +#define HW_PORT_PCRn_CLR(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) & ~(v))) +#define HW_PORT_PCRn_TOG(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PORT_PCRn bitfields + */ + +/*! + * @name Register PORT_PCRn, field PS[0] (RW) + * + * Pull configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Internal pulldown resistor is enabled on the corresponding pin, if the + * corresponding PE field is set. + * - 1 - Internal pullup resistor is enabled on the corresponding pin, if the + * corresponding PE field is set. + */ +/*@{*/ +#define BP_PORT_PCRn_PS (0U) /*!< Bit position for PORT_PCRn_PS. */ +#define BM_PORT_PCRn_PS (0x00000001U) /*!< Bit mask for PORT_PCRn_PS. */ +#define BS_PORT_PCRn_PS (1U) /*!< Bit field size in bits for PORT_PCRn_PS. */ + +/*! @brief Read current value of the PORT_PCRn_PS field. */ +#define BR_PORT_PCRn_PS(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PS)) + +/*! @brief Format value for bitfield PORT_PCRn_PS. */ +#define BF_PORT_PCRn_PS(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_PS) & BM_PORT_PCRn_PS) + +/*! @brief Set the PS field to a new value. */ +#define BW_PORT_PCRn_PS(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PS) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field PE[1] (RW) + * + * Pull configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Internal pullup or pulldown resistor is not enabled on the + * corresponding pin. + * - 1 - Internal pullup or pulldown resistor is enabled on the corresponding + * pin, if the pin is configured as a digital input. + */ +/*@{*/ +#define BP_PORT_PCRn_PE (1U) /*!< Bit position for PORT_PCRn_PE. */ +#define BM_PORT_PCRn_PE (0x00000002U) /*!< Bit mask for PORT_PCRn_PE. */ +#define BS_PORT_PCRn_PE (1U) /*!< Bit field size in bits for PORT_PCRn_PE. */ + +/*! @brief Read current value of the PORT_PCRn_PE field. */ +#define BR_PORT_PCRn_PE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PE)) + +/*! @brief Format value for bitfield PORT_PCRn_PE. */ +#define BF_PORT_PCRn_PE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_PE) & BM_PORT_PCRn_PE) + +/*! @brief Set the PE field to a new value. */ +#define BW_PORT_PCRn_PE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PE) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field SRE[2] (RW) + * + * Slew rate configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Fast slew rate is configured on the corresponding pin, if the pin is + * configured as a digital output. + * - 1 - Slow slew rate is configured on the corresponding pin, if the pin is + * configured as a digital output. + */ +/*@{*/ +#define BP_PORT_PCRn_SRE (2U) /*!< Bit position for PORT_PCRn_SRE. */ +#define BM_PORT_PCRn_SRE (0x00000004U) /*!< Bit mask for PORT_PCRn_SRE. */ +#define BS_PORT_PCRn_SRE (1U) /*!< Bit field size in bits for PORT_PCRn_SRE. */ + +/*! @brief Read current value of the PORT_PCRn_SRE field. */ +#define BR_PORT_PCRn_SRE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_SRE)) + +/*! @brief Format value for bitfield PORT_PCRn_SRE. */ +#define BF_PORT_PCRn_SRE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_SRE) & BM_PORT_PCRn_SRE) + +/*! @brief Set the SRE field to a new value. */ +#define BW_PORT_PCRn_SRE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_SRE) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field PFE[4] (RW) + * + * Passive filter configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Passive input filter is disabled on the corresponding pin. + * - 1 - Passive input filter is enabled on the corresponding pin, if the pin is + * configured as a digital input. Refer to the device data sheet for filter + * characteristics. + */ +/*@{*/ +#define BP_PORT_PCRn_PFE (4U) /*!< Bit position for PORT_PCRn_PFE. */ +#define BM_PORT_PCRn_PFE (0x00000010U) /*!< Bit mask for PORT_PCRn_PFE. */ +#define BS_PORT_PCRn_PFE (1U) /*!< Bit field size in bits for PORT_PCRn_PFE. */ + +/*! @brief Read current value of the PORT_PCRn_PFE field. */ +#define BR_PORT_PCRn_PFE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PFE)) + +/*! @brief Format value for bitfield PORT_PCRn_PFE. */ +#define BF_PORT_PCRn_PFE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_PFE) & BM_PORT_PCRn_PFE) + +/*! @brief Set the PFE field to a new value. */ +#define BW_PORT_PCRn_PFE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PFE) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field ODE[5] (RW) + * + * Open drain configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Open drain output is disabled on the corresponding pin. + * - 1 - Open drain output is enabled on the corresponding pin, if the pin is + * configured as a digital output. + */ +/*@{*/ +#define BP_PORT_PCRn_ODE (5U) /*!< Bit position for PORT_PCRn_ODE. */ +#define BM_PORT_PCRn_ODE (0x00000020U) /*!< Bit mask for PORT_PCRn_ODE. */ +#define BS_PORT_PCRn_ODE (1U) /*!< Bit field size in bits for PORT_PCRn_ODE. */ + +/*! @brief Read current value of the PORT_PCRn_ODE field. */ +#define BR_PORT_PCRn_ODE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ODE)) + +/*! @brief Format value for bitfield PORT_PCRn_ODE. */ +#define BF_PORT_PCRn_ODE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_ODE) & BM_PORT_PCRn_ODE) + +/*! @brief Set the ODE field to a new value. */ +#define BW_PORT_PCRn_ODE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ODE) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field DSE[6] (RW) + * + * Drive strength configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Low drive strength is configured on the corresponding pin, if pin is + * configured as a digital output. + * - 1 - High drive strength is configured on the corresponding pin, if pin is + * configured as a digital output. + */ +/*@{*/ +#define BP_PORT_PCRn_DSE (6U) /*!< Bit position for PORT_PCRn_DSE. */ +#define BM_PORT_PCRn_DSE (0x00000040U) /*!< Bit mask for PORT_PCRn_DSE. */ +#define BS_PORT_PCRn_DSE (1U) /*!< Bit field size in bits for PORT_PCRn_DSE. */ + +/*! @brief Read current value of the PORT_PCRn_DSE field. */ +#define BR_PORT_PCRn_DSE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_DSE)) + +/*! @brief Format value for bitfield PORT_PCRn_DSE. */ +#define BF_PORT_PCRn_DSE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_DSE) & BM_PORT_PCRn_DSE) + +/*! @brief Set the DSE field to a new value. */ +#define BW_PORT_PCRn_DSE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_DSE) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field MUX[10:8] (RW) + * + * Not all pins support all pin muxing slots. Unimplemented pin muxing slots are + * reserved and may result in configuring the pin for a different pin muxing + * slot. The corresponding pin is configured in the following pin muxing slot as + * follows: + * + * Values: + * - 000 - Pin disabled (analog). + * - 001 - Alternative 1 (GPIO). + * - 010 - Alternative 2 (chip-specific). + * - 011 - Alternative 3 (chip-specific). + * - 100 - Alternative 4 (chip-specific). + * - 101 - Alternative 5 (chip-specific). + * - 110 - Alternative 6 (chip-specific). + * - 111 - Alternative 7 (chip-specific). + */ +/*@{*/ +#define BP_PORT_PCRn_MUX (8U) /*!< Bit position for PORT_PCRn_MUX. */ +#define BM_PORT_PCRn_MUX (0x00000700U) /*!< Bit mask for PORT_PCRn_MUX. */ +#define BS_PORT_PCRn_MUX (3U) /*!< Bit field size in bits for PORT_PCRn_MUX. */ + +/*! @brief Read current value of the PORT_PCRn_MUX field. */ +#define BR_PORT_PCRn_MUX(x, n) (HW_PORT_PCRn(x, n).B.MUX) + +/*! @brief Format value for bitfield PORT_PCRn_MUX. */ +#define BF_PORT_PCRn_MUX(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_MUX) & BM_PORT_PCRn_MUX) + +/*! @brief Set the MUX field to a new value. */ +#define BW_PORT_PCRn_MUX(x, n, v) (HW_PORT_PCRn_WR(x, n, (HW_PORT_PCRn_RD(x, n) & ~BM_PORT_PCRn_MUX) | BF_PORT_PCRn_MUX(v))) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field LK[15] (RW) + * + * Values: + * - 0 - Pin Control Register fields [15:0] are not locked. + * - 1 - Pin Control Register fields [15:0] are locked and cannot be updated + * until the next system reset. + */ +/*@{*/ +#define BP_PORT_PCRn_LK (15U) /*!< Bit position for PORT_PCRn_LK. */ +#define BM_PORT_PCRn_LK (0x00008000U) /*!< Bit mask for PORT_PCRn_LK. */ +#define BS_PORT_PCRn_LK (1U) /*!< Bit field size in bits for PORT_PCRn_LK. */ + +/*! @brief Read current value of the PORT_PCRn_LK field. */ +#define BR_PORT_PCRn_LK(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_LK)) + +/*! @brief Format value for bitfield PORT_PCRn_LK. */ +#define BF_PORT_PCRn_LK(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_LK) & BM_PORT_PCRn_LK) + +/*! @brief Set the LK field to a new value. */ +#define BW_PORT_PCRn_LK(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_LK) = (v)) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field IRQC[19:16] (RW) + * + * The pin interrupt configuration is valid in all digital pin muxing modes. The + * corresponding pin is configured to generate interrupt/DMA request as follows: + * + * Values: + * - 0000 - Interrupt/DMA request disabled. + * - 0001 - DMA request on rising edge. + * - 0010 - DMA request on falling edge. + * - 0011 - DMA request on either edge. + * - 1000 - Interrupt when logic 0. + * - 1001 - Interrupt on rising-edge. + * - 1010 - Interrupt on falling-edge. + * - 1011 - Interrupt on either edge. + * - 1100 - Interrupt when logic 1. + */ +/*@{*/ +#define BP_PORT_PCRn_IRQC (16U) /*!< Bit position for PORT_PCRn_IRQC. */ +#define BM_PORT_PCRn_IRQC (0x000F0000U) /*!< Bit mask for PORT_PCRn_IRQC. */ +#define BS_PORT_PCRn_IRQC (4U) /*!< Bit field size in bits for PORT_PCRn_IRQC. */ + +/*! @brief Read current value of the PORT_PCRn_IRQC field. */ +#define BR_PORT_PCRn_IRQC(x, n) (HW_PORT_PCRn(x, n).B.IRQC) + +/*! @brief Format value for bitfield PORT_PCRn_IRQC. */ +#define BF_PORT_PCRn_IRQC(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_IRQC) & BM_PORT_PCRn_IRQC) + +/*! @brief Set the IRQC field to a new value. */ +#define BW_PORT_PCRn_IRQC(x, n, v) (HW_PORT_PCRn_WR(x, n, (HW_PORT_PCRn_RD(x, n) & ~BM_PORT_PCRn_IRQC) | BF_PORT_PCRn_IRQC(v))) +/*@}*/ + +/*! + * @name Register PORT_PCRn, field ISF[24] (W1C) + * + * The pin interrupt configuration is valid in all digital pin muxing modes. + * + * Values: + * - 0 - Configured interrupt is not detected. + * - 1 - Configured interrupt is detected. If the pin is configured to generate + * a DMA request, then the corresponding flag will be cleared automatically + * at the completion of the requested DMA transfer. Otherwise, the flag + * remains set until a logic 1 is written to the flag. If the pin is configured for + * a level sensitive interrupt and the pin remains asserted, then the flag + * is set again immediately after it is cleared. + */ +/*@{*/ +#define BP_PORT_PCRn_ISF (24U) /*!< Bit position for PORT_PCRn_ISF. */ +#define BM_PORT_PCRn_ISF (0x01000000U) /*!< Bit mask for PORT_PCRn_ISF. */ +#define BS_PORT_PCRn_ISF (1U) /*!< Bit field size in bits for PORT_PCRn_ISF. */ + +/*! @brief Read current value of the PORT_PCRn_ISF field. */ +#define BR_PORT_PCRn_ISF(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ISF)) + +/*! @brief Format value for bitfield PORT_PCRn_ISF. */ +#define BF_PORT_PCRn_ISF(v) ((uint32_t)((uint32_t)(v) << BP_PORT_PCRn_ISF) & BM_PORT_PCRn_ISF) + +/*! @brief Set the ISF field to a new value. */ +#define BW_PORT_PCRn_ISF(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ISF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_PORT_GPCLR - Global Pin Control Low Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_GPCLR - Global Pin Control Low Register (WORZ) + * + * Reset value: 0x00000000U + * + * Only 32-bit writes are supported to this register. + */ +typedef union _hw_port_gpclr +{ + uint32_t U; + struct _hw_port_gpclr_bitfields + { + uint32_t GPWD : 16; /*!< [15:0] Global Pin Write Data */ + uint32_t GPWE : 16; /*!< [31:16] Global Pin Write Enable */ + } B; +} hw_port_gpclr_t; + +/*! + * @name Constants and macros for entire PORT_GPCLR register + */ +/*@{*/ +#define HW_PORT_GPCLR_ADDR(x) ((x) + 0x80U) + +#define HW_PORT_GPCLR(x) (*(__O hw_port_gpclr_t *) HW_PORT_GPCLR_ADDR(x)) +#define HW_PORT_GPCLR_RD(x) (HW_PORT_GPCLR(x).U) +#define HW_PORT_GPCLR_WR(x, v) (HW_PORT_GPCLR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual PORT_GPCLR bitfields + */ + +/*! + * @name Register PORT_GPCLR, field GPWD[15:0] (WORZ) + * + * Write value that is written to all Pin Control Registers bits [15:0] that are + * selected by GPWE. + */ +/*@{*/ +#define BP_PORT_GPCLR_GPWD (0U) /*!< Bit position for PORT_GPCLR_GPWD. */ +#define BM_PORT_GPCLR_GPWD (0x0000FFFFU) /*!< Bit mask for PORT_GPCLR_GPWD. */ +#define BS_PORT_GPCLR_GPWD (16U) /*!< Bit field size in bits for PORT_GPCLR_GPWD. */ + +/*! @brief Format value for bitfield PORT_GPCLR_GPWD. */ +#define BF_PORT_GPCLR_GPWD(v) ((uint32_t)((uint32_t)(v) << BP_PORT_GPCLR_GPWD) & BM_PORT_GPCLR_GPWD) + +/*! @brief Set the GPWD field to a new value. */ +#define BW_PORT_GPCLR_GPWD(x, v) (HW_PORT_GPCLR_WR(x, (HW_PORT_GPCLR_RD(x) & ~BM_PORT_GPCLR_GPWD) | BF_PORT_GPCLR_GPWD(v))) +/*@}*/ + +/*! + * @name Register PORT_GPCLR, field GPWE[31:16] (WORZ) + * + * Selects which Pin Control Registers (15 through 0) bits [15:0] update with + * the value in GPWD. If a selected Pin Control Register is locked then the write + * to that register is ignored. + * + * Values: + * - 0 - Corresponding Pin Control Register is not updated with the value in + * GPWD. + * - 1 - Corresponding Pin Control Register is updated with the value in GPWD. + */ +/*@{*/ +#define BP_PORT_GPCLR_GPWE (16U) /*!< Bit position for PORT_GPCLR_GPWE. */ +#define BM_PORT_GPCLR_GPWE (0xFFFF0000U) /*!< Bit mask for PORT_GPCLR_GPWE. */ +#define BS_PORT_GPCLR_GPWE (16U) /*!< Bit field size in bits for PORT_GPCLR_GPWE. */ + +/*! @brief Format value for bitfield PORT_GPCLR_GPWE. */ +#define BF_PORT_GPCLR_GPWE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_GPCLR_GPWE) & BM_PORT_GPCLR_GPWE) + +/*! @brief Set the GPWE field to a new value. */ +#define BW_PORT_GPCLR_GPWE(x, v) (HW_PORT_GPCLR_WR(x, (HW_PORT_GPCLR_RD(x) & ~BM_PORT_GPCLR_GPWE) | BF_PORT_GPCLR_GPWE(v))) +/*@}*/ + +/******************************************************************************* + * HW_PORT_GPCHR - Global Pin Control High Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_GPCHR - Global Pin Control High Register (WORZ) + * + * Reset value: 0x00000000U + * + * Only 32-bit writes are supported to this register. + */ +typedef union _hw_port_gpchr +{ + uint32_t U; + struct _hw_port_gpchr_bitfields + { + uint32_t GPWD : 16; /*!< [15:0] Global Pin Write Data */ + uint32_t GPWE : 16; /*!< [31:16] Global Pin Write Enable */ + } B; +} hw_port_gpchr_t; + +/*! + * @name Constants and macros for entire PORT_GPCHR register + */ +/*@{*/ +#define HW_PORT_GPCHR_ADDR(x) ((x) + 0x84U) + +#define HW_PORT_GPCHR(x) (*(__O hw_port_gpchr_t *) HW_PORT_GPCHR_ADDR(x)) +#define HW_PORT_GPCHR_RD(x) (HW_PORT_GPCHR(x).U) +#define HW_PORT_GPCHR_WR(x, v) (HW_PORT_GPCHR(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual PORT_GPCHR bitfields + */ + +/*! + * @name Register PORT_GPCHR, field GPWD[15:0] (WORZ) + * + * Write value that is written to all Pin Control Registers bits [15:0] that are + * selected by GPWE. + */ +/*@{*/ +#define BP_PORT_GPCHR_GPWD (0U) /*!< Bit position for PORT_GPCHR_GPWD. */ +#define BM_PORT_GPCHR_GPWD (0x0000FFFFU) /*!< Bit mask for PORT_GPCHR_GPWD. */ +#define BS_PORT_GPCHR_GPWD (16U) /*!< Bit field size in bits for PORT_GPCHR_GPWD. */ + +/*! @brief Format value for bitfield PORT_GPCHR_GPWD. */ +#define BF_PORT_GPCHR_GPWD(v) ((uint32_t)((uint32_t)(v) << BP_PORT_GPCHR_GPWD) & BM_PORT_GPCHR_GPWD) + +/*! @brief Set the GPWD field to a new value. */ +#define BW_PORT_GPCHR_GPWD(x, v) (HW_PORT_GPCHR_WR(x, (HW_PORT_GPCHR_RD(x) & ~BM_PORT_GPCHR_GPWD) | BF_PORT_GPCHR_GPWD(v))) +/*@}*/ + +/*! + * @name Register PORT_GPCHR, field GPWE[31:16] (WORZ) + * + * Selects which Pin Control Registers (31 through 16) bits [15:0] update with + * the value in GPWD. If a selected Pin Control Register is locked then the write + * to that register is ignored. + * + * Values: + * - 0 - Corresponding Pin Control Register is not updated with the value in + * GPWD. + * - 1 - Corresponding Pin Control Register is updated with the value in GPWD. + */ +/*@{*/ +#define BP_PORT_GPCHR_GPWE (16U) /*!< Bit position for PORT_GPCHR_GPWE. */ +#define BM_PORT_GPCHR_GPWE (0xFFFF0000U) /*!< Bit mask for PORT_GPCHR_GPWE. */ +#define BS_PORT_GPCHR_GPWE (16U) /*!< Bit field size in bits for PORT_GPCHR_GPWE. */ + +/*! @brief Format value for bitfield PORT_GPCHR_GPWE. */ +#define BF_PORT_GPCHR_GPWE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_GPCHR_GPWE) & BM_PORT_GPCHR_GPWE) + +/*! @brief Set the GPWE field to a new value. */ +#define BW_PORT_GPCHR_GPWE(x, v) (HW_PORT_GPCHR_WR(x, (HW_PORT_GPCHR_RD(x) & ~BM_PORT_GPCHR_GPWE) | BF_PORT_GPCHR_GPWE(v))) +/*@}*/ + +/******************************************************************************* + * HW_PORT_ISFR - Interrupt Status Flag Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_ISFR - Interrupt Status Flag Register (W1C) + * + * Reset value: 0x00000000U + * + * The pin interrupt configuration is valid in all digital pin muxing modes. The + * Interrupt Status Flag for each pin is also visible in the corresponding Pin + * Control Register, and each flag can be cleared in either location. + */ +typedef union _hw_port_isfr +{ + uint32_t U; + struct _hw_port_isfr_bitfields + { + uint32_t ISF : 32; /*!< [31:0] Interrupt Status Flag */ + } B; +} hw_port_isfr_t; + +/*! + * @name Constants and macros for entire PORT_ISFR register + */ +/*@{*/ +#define HW_PORT_ISFR_ADDR(x) ((x) + 0xA0U) + +#define HW_PORT_ISFR(x) (*(__IO hw_port_isfr_t *) HW_PORT_ISFR_ADDR(x)) +#define HW_PORT_ISFR_RD(x) (HW_PORT_ISFR(x).U) +#define HW_PORT_ISFR_WR(x, v) (HW_PORT_ISFR(x).U = (v)) +#define HW_PORT_ISFR_SET(x, v) (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) | (v))) +#define HW_PORT_ISFR_CLR(x, v) (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) & ~(v))) +#define HW_PORT_ISFR_TOG(x, v) (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PORT_ISFR bitfields + */ + +/*! + * @name Register PORT_ISFR, field ISF[31:0] (W1C) + * + * Each bit in the field indicates the detection of the configured interrupt of + * the same number as the field. + * + * Values: + * - 0 - Configured interrupt is not detected. + * - 1 - Configured interrupt is detected. If the pin is configured to generate + * a DMA request, then the corresponding flag will be cleared automatically + * at the completion of the requested DMA transfer. Otherwise, the flag + * remains set until a logic 1 is written to the flag. If the pin is configured for + * a level sensitive interrupt and the pin remains asserted, then the flag + * is set again immediately after it is cleared. + */ +/*@{*/ +#define BP_PORT_ISFR_ISF (0U) /*!< Bit position for PORT_ISFR_ISF. */ +#define BM_PORT_ISFR_ISF (0xFFFFFFFFU) /*!< Bit mask for PORT_ISFR_ISF. */ +#define BS_PORT_ISFR_ISF (32U) /*!< Bit field size in bits for PORT_ISFR_ISF. */ + +/*! @brief Read current value of the PORT_ISFR_ISF field. */ +#define BR_PORT_ISFR_ISF(x) (HW_PORT_ISFR(x).U) + +/*! @brief Format value for bitfield PORT_ISFR_ISF. */ +#define BF_PORT_ISFR_ISF(v) ((uint32_t)((uint32_t)(v) << BP_PORT_ISFR_ISF) & BM_PORT_ISFR_ISF) + +/*! @brief Set the ISF field to a new value. */ +#define BW_PORT_ISFR_ISF(x, v) (HW_PORT_ISFR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_PORT_DFER - Digital Filter Enable Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_DFER - Digital Filter Enable Register (RW) + * + * Reset value: 0x00000000U + * + * The corresponding bit is read only for pins that do not support a digital + * filter. Refer to the Chapter of Signal Multiplexing and Signal Descriptions for + * the pins that support digital filter. The digital filter configuration is valid + * in all digital pin muxing modes. + */ +typedef union _hw_port_dfer +{ + uint32_t U; + struct _hw_port_dfer_bitfields + { + uint32_t DFE : 32; /*!< [31:0] Digital Filter Enable */ + } B; +} hw_port_dfer_t; + +/*! + * @name Constants and macros for entire PORT_DFER register + */ +/*@{*/ +#define HW_PORT_DFER_ADDR(x) ((x) + 0xC0U) + +#define HW_PORT_DFER(x) (*(__IO hw_port_dfer_t *) HW_PORT_DFER_ADDR(x)) +#define HW_PORT_DFER_RD(x) (HW_PORT_DFER(x).U) +#define HW_PORT_DFER_WR(x, v) (HW_PORT_DFER(x).U = (v)) +#define HW_PORT_DFER_SET(x, v) (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) | (v))) +#define HW_PORT_DFER_CLR(x, v) (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) & ~(v))) +#define HW_PORT_DFER_TOG(x, v) (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PORT_DFER bitfields + */ + +/*! + * @name Register PORT_DFER, field DFE[31:0] (RW) + * + * The digital filter configuration is valid in all digital pin muxing modes. + * The output of each digital filter is reset to zero at system reset and whenever + * the digital filter is disabled. Each bit in the field enables the digital + * filter of the same number as the field. + * + * Values: + * - 0 - Digital filter is disabled on the corresponding pin and output of the + * digital filter is reset to zero. + * - 1 - Digital filter is enabled on the corresponding pin, if the pin is + * configured as a digital input. + */ +/*@{*/ +#define BP_PORT_DFER_DFE (0U) /*!< Bit position for PORT_DFER_DFE. */ +#define BM_PORT_DFER_DFE (0xFFFFFFFFU) /*!< Bit mask for PORT_DFER_DFE. */ +#define BS_PORT_DFER_DFE (32U) /*!< Bit field size in bits for PORT_DFER_DFE. */ + +/*! @brief Read current value of the PORT_DFER_DFE field. */ +#define BR_PORT_DFER_DFE(x) (HW_PORT_DFER(x).U) + +/*! @brief Format value for bitfield PORT_DFER_DFE. */ +#define BF_PORT_DFER_DFE(v) ((uint32_t)((uint32_t)(v) << BP_PORT_DFER_DFE) & BM_PORT_DFER_DFE) + +/*! @brief Set the DFE field to a new value. */ +#define BW_PORT_DFER_DFE(x, v) (HW_PORT_DFER_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_PORT_DFCR - Digital Filter Clock Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_DFCR - Digital Filter Clock Register (RW) + * + * Reset value: 0x00000000U + * + * This register is read only for ports that do not support a digital filter. + * The digital filter configuration is valid in all digital pin muxing modes. + */ +typedef union _hw_port_dfcr +{ + uint32_t U; + struct _hw_port_dfcr_bitfields + { + uint32_t CS : 1; /*!< [0] Clock Source */ + uint32_t RESERVED0 : 31; /*!< [31:1] */ + } B; +} hw_port_dfcr_t; + +/*! + * @name Constants and macros for entire PORT_DFCR register + */ +/*@{*/ +#define HW_PORT_DFCR_ADDR(x) ((x) + 0xC4U) + +#define HW_PORT_DFCR(x) (*(__IO hw_port_dfcr_t *) HW_PORT_DFCR_ADDR(x)) +#define HW_PORT_DFCR_RD(x) (HW_PORT_DFCR(x).U) +#define HW_PORT_DFCR_WR(x, v) (HW_PORT_DFCR(x).U = (v)) +#define HW_PORT_DFCR_SET(x, v) (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) | (v))) +#define HW_PORT_DFCR_CLR(x, v) (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) & ~(v))) +#define HW_PORT_DFCR_TOG(x, v) (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PORT_DFCR bitfields + */ + +/*! + * @name Register PORT_DFCR, field CS[0] (RW) + * + * The digital filter configuration is valid in all digital pin muxing modes. + * Configures the clock source for the digital input filters. Changing the filter + * clock source must be done only when all digital filters are disabled. + * + * Values: + * - 0 - Digital filters are clocked by the bus clock. + * - 1 - Digital filters are clocked by the 1 kHz LPO clock. + */ +/*@{*/ +#define BP_PORT_DFCR_CS (0U) /*!< Bit position for PORT_DFCR_CS. */ +#define BM_PORT_DFCR_CS (0x00000001U) /*!< Bit mask for PORT_DFCR_CS. */ +#define BS_PORT_DFCR_CS (1U) /*!< Bit field size in bits for PORT_DFCR_CS. */ + +/*! @brief Read current value of the PORT_DFCR_CS field. */ +#define BR_PORT_DFCR_CS(x) (BITBAND_ACCESS32(HW_PORT_DFCR_ADDR(x), BP_PORT_DFCR_CS)) + +/*! @brief Format value for bitfield PORT_DFCR_CS. */ +#define BF_PORT_DFCR_CS(v) ((uint32_t)((uint32_t)(v) << BP_PORT_DFCR_CS) & BM_PORT_DFCR_CS) + +/*! @brief Set the CS field to a new value. */ +#define BW_PORT_DFCR_CS(x, v) (BITBAND_ACCESS32(HW_PORT_DFCR_ADDR(x), BP_PORT_DFCR_CS) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_PORT_DFWR - Digital Filter Width Register + ******************************************************************************/ + +/*! + * @brief HW_PORT_DFWR - Digital Filter Width Register (RW) + * + * Reset value: 0x00000000U + * + * This register is read only for ports that do not support a digital filter. + * The digital filter configuration is valid in all digital pin muxing modes. + */ +typedef union _hw_port_dfwr +{ + uint32_t U; + struct _hw_port_dfwr_bitfields + { + uint32_t FILT : 5; /*!< [4:0] Filter Length */ + uint32_t RESERVED0 : 27; /*!< [31:5] */ + } B; +} hw_port_dfwr_t; + +/*! + * @name Constants and macros for entire PORT_DFWR register + */ +/*@{*/ +#define HW_PORT_DFWR_ADDR(x) ((x) + 0xC8U) + +#define HW_PORT_DFWR(x) (*(__IO hw_port_dfwr_t *) HW_PORT_DFWR_ADDR(x)) +#define HW_PORT_DFWR_RD(x) (HW_PORT_DFWR(x).U) +#define HW_PORT_DFWR_WR(x, v) (HW_PORT_DFWR(x).U = (v)) +#define HW_PORT_DFWR_SET(x, v) (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) | (v))) +#define HW_PORT_DFWR_CLR(x, v) (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) & ~(v))) +#define HW_PORT_DFWR_TOG(x, v) (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual PORT_DFWR bitfields + */ + +/*! + * @name Register PORT_DFWR, field FILT[4:0] (RW) + * + * The digital filter configuration is valid in all digital pin muxing modes. + * Configures the maximum size of the glitches, in clock cycles, that the digital + * filter absorbs for the enabled digital filters. Glitches that are longer than + * this register setting will pass through the digital filter, and glitches that + * are equal to or less than this register setting are filtered. Changing the + * filter length must be done only after all filters are disabled. + */ +/*@{*/ +#define BP_PORT_DFWR_FILT (0U) /*!< Bit position for PORT_DFWR_FILT. */ +#define BM_PORT_DFWR_FILT (0x0000001FU) /*!< Bit mask for PORT_DFWR_FILT. */ +#define BS_PORT_DFWR_FILT (5U) /*!< Bit field size in bits for PORT_DFWR_FILT. */ + +/*! @brief Read current value of the PORT_DFWR_FILT field. */ +#define BR_PORT_DFWR_FILT(x) (HW_PORT_DFWR(x).B.FILT) + +/*! @brief Format value for bitfield PORT_DFWR_FILT. */ +#define BF_PORT_DFWR_FILT(v) ((uint32_t)((uint32_t)(v) << BP_PORT_DFWR_FILT) & BM_PORT_DFWR_FILT) + +/*! @brief Set the FILT field to a new value. */ +#define BW_PORT_DFWR_FILT(x, v) (HW_PORT_DFWR_WR(x, (HW_PORT_DFWR_RD(x) & ~BM_PORT_DFWR_FILT) | BF_PORT_DFWR_FILT(v))) +/*@}*/ + +/******************************************************************************* + * hw_port_t - module struct + ******************************************************************************/ +/*! + * @brief All PORT module registers. + */ +#pragma pack(1) +typedef struct _hw_port +{ + __IO hw_port_pcrn_t PCRn[32]; /*!< [0x0] Pin Control Register n */ + __O hw_port_gpclr_t GPCLR; /*!< [0x80] Global Pin Control Low Register */ + __O hw_port_gpchr_t GPCHR; /*!< [0x84] Global Pin Control High Register */ + uint8_t _reserved0[24]; + __IO hw_port_isfr_t ISFR; /*!< [0xA0] Interrupt Status Flag Register */ + uint8_t _reserved1[28]; + __IO hw_port_dfer_t DFER; /*!< [0xC0] Digital Filter Enable Register */ + __IO hw_port_dfcr_t DFCR; /*!< [0xC4] Digital Filter Clock Register */ + __IO hw_port_dfwr_t DFWR; /*!< [0xC8] Digital Filter Width Register */ +} hw_port_t; +#pragma pack() + +/*! @brief Macro to access all PORT registers. */ +/*! @param x PORT module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_PORT(PORTA_BASE)</code>. */ +#define HW_PORT(x) (*(hw_port_t *)(x)) + +#endif /* __HW_PORT_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rcm.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rcm.h new file mode 100644 index 0000000000..c9da9ba543 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rcm.h @@ -0,0 +1,1154 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_RCM_REGISTERS_H__ +#define __HW_RCM_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 RCM + * + * Reset Control Module + * + * Registers defined in this header file: + * - HW_RCM_SRS0 - System Reset Status Register 0 + * - HW_RCM_SRS1 - System Reset Status Register 1 + * - HW_RCM_RPFC - Reset Pin Filter Control register + * - HW_RCM_RPFW - Reset Pin Filter Width register + * - HW_RCM_MR - Mode Register + * - HW_RCM_SSRS0 - Sticky System Reset Status Register 0 + * - HW_RCM_SSRS1 - Sticky System Reset Status Register 1 + * + * - hw_rcm_t - Struct containing all module registers. + */ + +#define HW_RCM_INSTANCE_COUNT (1U) /*!< Number of instances of the RCM module. */ + +/******************************************************************************* + * HW_RCM_SRS0 - System Reset Status Register 0 + ******************************************************************************/ + +/*! + * @brief HW_RCM_SRS0 - System Reset Status Register 0 (RO) + * + * Reset value: 0x82U + * + * This register includes read-only status flags to indicate the source of the + * most recent reset. The reset state of these bits depends on what caused the MCU + * to reset. The reset value of this register depends on the reset source: POR + * (including LVD) - 0x82 LVD (without POR) - 0x02 VLLS mode wakeup due to RESET + * pin assertion - 0x41 VLLS mode wakeup due to other wakeup sources - 0x01 Other + * reset - a bit is set if its corresponding reset source caused the reset + */ +typedef union _hw_rcm_srs0 +{ + uint8_t U; + struct _hw_rcm_srs0_bitfields + { + uint8_t WAKEUP : 1; /*!< [0] Low Leakage Wakeup Reset */ + uint8_t LVD : 1; /*!< [1] Low-Voltage Detect Reset */ + uint8_t LOC : 1; /*!< [2] Loss-of-Clock Reset */ + uint8_t LOL : 1; /*!< [3] Loss-of-Lock Reset */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t WDOGb : 1; /*!< [5] Watchdog */ + uint8_t PIN : 1; /*!< [6] External Reset Pin */ + uint8_t POR : 1; /*!< [7] Power-On Reset */ + } B; +} hw_rcm_srs0_t; + +/*! + * @name Constants and macros for entire RCM_SRS0 register + */ +/*@{*/ +#define HW_RCM_SRS0_ADDR(x) ((x) + 0x0U) + +#define HW_RCM_SRS0(x) (*(__I hw_rcm_srs0_t *) HW_RCM_SRS0_ADDR(x)) +#define HW_RCM_SRS0_RD(x) (HW_RCM_SRS0(x).U) +/*@}*/ + +/* + * Constants & macros for individual RCM_SRS0 bitfields + */ + +/*! + * @name Register RCM_SRS0, field WAKEUP[0] (RO) + * + * Indicates a reset has been caused by an enabled LLWU module wakeup source + * while the chip was in a low leakage mode. In LLS mode, the RESET pin is the only + * wakeup source that can cause this reset. Any enabled wakeup source in a VLLSx + * mode causes a reset. This bit is cleared by any reset except WAKEUP. + * + * Values: + * - 0 - Reset not caused by LLWU module wakeup source + * - 1 - Reset caused by LLWU module wakeup source + */ +/*@{*/ +#define BP_RCM_SRS0_WAKEUP (0U) /*!< Bit position for RCM_SRS0_WAKEUP. */ +#define BM_RCM_SRS0_WAKEUP (0x01U) /*!< Bit mask for RCM_SRS0_WAKEUP. */ +#define BS_RCM_SRS0_WAKEUP (1U) /*!< Bit field size in bits for RCM_SRS0_WAKEUP. */ + +/*! @brief Read current value of the RCM_SRS0_WAKEUP field. */ +#define BR_RCM_SRS0_WAKEUP(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_WAKEUP)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field LVD[1] (RO) + * + * If PMC_LVDSC1[LVDRE] is set and the supply drops below the LVD trip voltage, + * an LVD reset occurs. This field is also set by POR. + * + * Values: + * - 0 - Reset not caused by LVD trip or POR + * - 1 - Reset caused by LVD trip or POR + */ +/*@{*/ +#define BP_RCM_SRS0_LVD (1U) /*!< Bit position for RCM_SRS0_LVD. */ +#define BM_RCM_SRS0_LVD (0x02U) /*!< Bit mask for RCM_SRS0_LVD. */ +#define BS_RCM_SRS0_LVD (1U) /*!< Bit field size in bits for RCM_SRS0_LVD. */ + +/*! @brief Read current value of the RCM_SRS0_LVD field. */ +#define BR_RCM_SRS0_LVD(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LVD)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field LOC[2] (RO) + * + * Indicates a reset has been caused by a loss of external clock. The MCG clock + * monitor must be enabled for a loss of clock to be detected. Refer to the + * detailed MCG description for information on enabling the clock monitor. + * + * Values: + * - 0 - Reset not caused by a loss of external clock. + * - 1 - Reset caused by a loss of external clock. + */ +/*@{*/ +#define BP_RCM_SRS0_LOC (2U) /*!< Bit position for RCM_SRS0_LOC. */ +#define BM_RCM_SRS0_LOC (0x04U) /*!< Bit mask for RCM_SRS0_LOC. */ +#define BS_RCM_SRS0_LOC (1U) /*!< Bit field size in bits for RCM_SRS0_LOC. */ + +/*! @brief Read current value of the RCM_SRS0_LOC field. */ +#define BR_RCM_SRS0_LOC(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LOC)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field LOL[3] (RO) + * + * Indicates a reset has been caused by a loss of lock in the MCG PLL. See the + * MCG description for information on the loss-of-clock event. + * + * Values: + * - 0 - Reset not caused by a loss of lock in the PLL + * - 1 - Reset caused by a loss of lock in the PLL + */ +/*@{*/ +#define BP_RCM_SRS0_LOL (3U) /*!< Bit position for RCM_SRS0_LOL. */ +#define BM_RCM_SRS0_LOL (0x08U) /*!< Bit mask for RCM_SRS0_LOL. */ +#define BS_RCM_SRS0_LOL (1U) /*!< Bit field size in bits for RCM_SRS0_LOL. */ + +/*! @brief Read current value of the RCM_SRS0_LOL field. */ +#define BR_RCM_SRS0_LOL(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_LOL)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field WDOG[5] (RO) + * + * Indicates a reset has been caused by the watchdog timer timing out. This + * reset source can be blocked by disabling the watchdog. + * + * Values: + * - 0 - Reset not caused by watchdog timeout + * - 1 - Reset caused by watchdog timeout + */ +/*@{*/ +#define BP_RCM_SRS0_WDOG (5U) /*!< Bit position for RCM_SRS0_WDOG. */ +#define BM_RCM_SRS0_WDOG (0x20U) /*!< Bit mask for RCM_SRS0_WDOG. */ +#define BS_RCM_SRS0_WDOG (1U) /*!< Bit field size in bits for RCM_SRS0_WDOG. */ + +/*! @brief Read current value of the RCM_SRS0_WDOG field. */ +#define BR_RCM_SRS0_WDOG(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_WDOG)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field PIN[6] (RO) + * + * Indicates a reset has been caused by an active-low level on the external + * RESET pin. + * + * Values: + * - 0 - Reset not caused by external reset pin + * - 1 - Reset caused by external reset pin + */ +/*@{*/ +#define BP_RCM_SRS0_PIN (6U) /*!< Bit position for RCM_SRS0_PIN. */ +#define BM_RCM_SRS0_PIN (0x40U) /*!< Bit mask for RCM_SRS0_PIN. */ +#define BS_RCM_SRS0_PIN (1U) /*!< Bit field size in bits for RCM_SRS0_PIN. */ + +/*! @brief Read current value of the RCM_SRS0_PIN field. */ +#define BR_RCM_SRS0_PIN(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_PIN)) +/*@}*/ + +/*! + * @name Register RCM_SRS0, field POR[7] (RO) + * + * Indicates a reset has been caused by the power-on detection logic. Because + * the internal supply voltage was ramping up at the time, the low-voltage reset + * (LVD) status bit is also set to indicate that the reset occurred while the + * internal supply was below the LVD threshold. + * + * Values: + * - 0 - Reset not caused by POR + * - 1 - Reset caused by POR + */ +/*@{*/ +#define BP_RCM_SRS0_POR (7U) /*!< Bit position for RCM_SRS0_POR. */ +#define BM_RCM_SRS0_POR (0x80U) /*!< Bit mask for RCM_SRS0_POR. */ +#define BS_RCM_SRS0_POR (1U) /*!< Bit field size in bits for RCM_SRS0_POR. */ + +/*! @brief Read current value of the RCM_SRS0_POR field. */ +#define BR_RCM_SRS0_POR(x) (BITBAND_ACCESS8(HW_RCM_SRS0_ADDR(x), BP_RCM_SRS0_POR)) +/*@}*/ + +/******************************************************************************* + * HW_RCM_SRS1 - System Reset Status Register 1 + ******************************************************************************/ + +/*! + * @brief HW_RCM_SRS1 - System Reset Status Register 1 (RO) + * + * Reset value: 0x00U + * + * This register includes read-only status flags to indicate the source of the + * most recent reset. The reset state of these bits depends on what caused the MCU + * to reset. The reset value of this register depends on the reset source: POR + * (including LVD) - 0x00 LVD (without POR) - 0x00 VLLS mode wakeup - 0x00 Other + * reset - a bit is set if its corresponding reset source caused the reset + */ +typedef union _hw_rcm_srs1 +{ + uint8_t U; + struct _hw_rcm_srs1_bitfields + { + uint8_t JTAG : 1; /*!< [0] JTAG Generated Reset */ + uint8_t LOCKUP : 1; /*!< [1] Core Lockup */ + uint8_t SW : 1; /*!< [2] Software */ + uint8_t MDM_AP : 1; /*!< [3] MDM-AP System Reset Request */ + uint8_t EZPT : 1; /*!< [4] EzPort Reset */ + uint8_t SACKERR : 1; /*!< [5] Stop Mode Acknowledge Error Reset */ + uint8_t RESERVED0 : 2; /*!< [7:6] */ + } B; +} hw_rcm_srs1_t; + +/*! + * @name Constants and macros for entire RCM_SRS1 register + */ +/*@{*/ +#define HW_RCM_SRS1_ADDR(x) ((x) + 0x1U) + +#define HW_RCM_SRS1(x) (*(__I hw_rcm_srs1_t *) HW_RCM_SRS1_ADDR(x)) +#define HW_RCM_SRS1_RD(x) (HW_RCM_SRS1(x).U) +/*@}*/ + +/* + * Constants & macros for individual RCM_SRS1 bitfields + */ + +/*! + * @name Register RCM_SRS1, field JTAG[0] (RO) + * + * Indicates a reset has been caused by JTAG selection of certain IR codes: + * EZPORT, EXTEST, HIGHZ, and CLAMP. + * + * Values: + * - 0 - Reset not caused by JTAG + * - 1 - Reset caused by JTAG + */ +/*@{*/ +#define BP_RCM_SRS1_JTAG (0U) /*!< Bit position for RCM_SRS1_JTAG. */ +#define BM_RCM_SRS1_JTAG (0x01U) /*!< Bit mask for RCM_SRS1_JTAG. */ +#define BS_RCM_SRS1_JTAG (1U) /*!< Bit field size in bits for RCM_SRS1_JTAG. */ + +/*! @brief Read current value of the RCM_SRS1_JTAG field. */ +#define BR_RCM_SRS1_JTAG(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_JTAG)) +/*@}*/ + +/*! + * @name Register RCM_SRS1, field LOCKUP[1] (RO) + * + * Indicates a reset has been caused by the ARM core indication of a LOCKUP + * event. + * + * Values: + * - 0 - Reset not caused by core LOCKUP event + * - 1 - Reset caused by core LOCKUP event + */ +/*@{*/ +#define BP_RCM_SRS1_LOCKUP (1U) /*!< Bit position for RCM_SRS1_LOCKUP. */ +#define BM_RCM_SRS1_LOCKUP (0x02U) /*!< Bit mask for RCM_SRS1_LOCKUP. */ +#define BS_RCM_SRS1_LOCKUP (1U) /*!< Bit field size in bits for RCM_SRS1_LOCKUP. */ + +/*! @brief Read current value of the RCM_SRS1_LOCKUP field. */ +#define BR_RCM_SRS1_LOCKUP(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_LOCKUP)) +/*@}*/ + +/*! + * @name Register RCM_SRS1, field SW[2] (RO) + * + * Indicates a reset has been caused by software setting of SYSRESETREQ bit in + * Application Interrupt and Reset Control Register in the ARM core. + * + * Values: + * - 0 - Reset not caused by software setting of SYSRESETREQ bit + * - 1 - Reset caused by software setting of SYSRESETREQ bit + */ +/*@{*/ +#define BP_RCM_SRS1_SW (2U) /*!< Bit position for RCM_SRS1_SW. */ +#define BM_RCM_SRS1_SW (0x04U) /*!< Bit mask for RCM_SRS1_SW. */ +#define BS_RCM_SRS1_SW (1U) /*!< Bit field size in bits for RCM_SRS1_SW. */ + +/*! @brief Read current value of the RCM_SRS1_SW field. */ +#define BR_RCM_SRS1_SW(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_SW)) +/*@}*/ + +/*! + * @name Register RCM_SRS1, field MDM_AP[3] (RO) + * + * Indicates a reset has been caused by the host debugger system setting of the + * System Reset Request bit in the MDM-AP Control Register. + * + * Values: + * - 0 - Reset not caused by host debugger system setting of the System Reset + * Request bit + * - 1 - Reset caused by host debugger system setting of the System Reset + * Request bit + */ +/*@{*/ +#define BP_RCM_SRS1_MDM_AP (3U) /*!< Bit position for RCM_SRS1_MDM_AP. */ +#define BM_RCM_SRS1_MDM_AP (0x08U) /*!< Bit mask for RCM_SRS1_MDM_AP. */ +#define BS_RCM_SRS1_MDM_AP (1U) /*!< Bit field size in bits for RCM_SRS1_MDM_AP. */ + +/*! @brief Read current value of the RCM_SRS1_MDM_AP field. */ +#define BR_RCM_SRS1_MDM_AP(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_MDM_AP)) +/*@}*/ + +/*! + * @name Register RCM_SRS1, field EZPT[4] (RO) + * + * Indicates a reset has been caused by EzPort receiving the RESET command while + * the device is in EzPort mode. + * + * Values: + * - 0 - Reset not caused by EzPort receiving the RESET command while the device + * is in EzPort mode + * - 1 - Reset caused by EzPort receiving the RESET command while the device is + * in EzPort mode + */ +/*@{*/ +#define BP_RCM_SRS1_EZPT (4U) /*!< Bit position for RCM_SRS1_EZPT. */ +#define BM_RCM_SRS1_EZPT (0x10U) /*!< Bit mask for RCM_SRS1_EZPT. */ +#define BS_RCM_SRS1_EZPT (1U) /*!< Bit field size in bits for RCM_SRS1_EZPT. */ + +/*! @brief Read current value of the RCM_SRS1_EZPT field. */ +#define BR_RCM_SRS1_EZPT(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_EZPT)) +/*@}*/ + +/*! + * @name Register RCM_SRS1, field SACKERR[5] (RO) + * + * Indicates that after an attempt to enter Stop mode, a reset has been caused + * by a failure of one or more peripherals to acknowledge within approximately one + * second to enter stop mode. + * + * Values: + * - 0 - Reset not caused by peripheral failure to acknowledge attempt to enter + * stop mode + * - 1 - Reset caused by peripheral failure to acknowledge attempt to enter stop + * mode + */ +/*@{*/ +#define BP_RCM_SRS1_SACKERR (5U) /*!< Bit position for RCM_SRS1_SACKERR. */ +#define BM_RCM_SRS1_SACKERR (0x20U) /*!< Bit mask for RCM_SRS1_SACKERR. */ +#define BS_RCM_SRS1_SACKERR (1U) /*!< Bit field size in bits for RCM_SRS1_SACKERR. */ + +/*! @brief Read current value of the RCM_SRS1_SACKERR field. */ +#define BR_RCM_SRS1_SACKERR(x) (BITBAND_ACCESS8(HW_RCM_SRS1_ADDR(x), BP_RCM_SRS1_SACKERR)) +/*@}*/ + +/******************************************************************************* + * HW_RCM_RPFC - Reset Pin Filter Control register + ******************************************************************************/ + +/*! + * @brief HW_RCM_RPFC - Reset Pin Filter Control register (RW) + * + * Reset value: 0x00U + * + * The reset values of bits 2-0 are for Chip POR only. They are unaffected by + * other reset types. The bus clock filter is reset when disabled or when entering + * stop mode. The LPO filter is reset when disabled . + */ +typedef union _hw_rcm_rpfc +{ + uint8_t U; + struct _hw_rcm_rpfc_bitfields + { + uint8_t RSTFLTSRW : 2; /*!< [1:0] Reset Pin Filter Select in Run and + * Wait Modes */ + uint8_t RSTFLTSS : 1; /*!< [2] Reset Pin Filter Select in Stop Mode */ + uint8_t RESERVED0 : 5; /*!< [7:3] */ + } B; +} hw_rcm_rpfc_t; + +/*! + * @name Constants and macros for entire RCM_RPFC register + */ +/*@{*/ +#define HW_RCM_RPFC_ADDR(x) ((x) + 0x4U) + +#define HW_RCM_RPFC(x) (*(__IO hw_rcm_rpfc_t *) HW_RCM_RPFC_ADDR(x)) +#define HW_RCM_RPFC_RD(x) (HW_RCM_RPFC(x).U) +#define HW_RCM_RPFC_WR(x, v) (HW_RCM_RPFC(x).U = (v)) +#define HW_RCM_RPFC_SET(x, v) (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) | (v))) +#define HW_RCM_RPFC_CLR(x, v) (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) & ~(v))) +#define HW_RCM_RPFC_TOG(x, v) (HW_RCM_RPFC_WR(x, HW_RCM_RPFC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RCM_RPFC bitfields + */ + +/*! + * @name Register RCM_RPFC, field RSTFLTSRW[1:0] (RW) + * + * Selects how the reset pin filter is enabled in run and wait modes. + * + * Values: + * - 00 - All filtering disabled + * - 01 - Bus clock filter enabled for normal operation + * - 10 - LPO clock filter enabled for normal operation + * - 11 - Reserved + */ +/*@{*/ +#define BP_RCM_RPFC_RSTFLTSRW (0U) /*!< Bit position for RCM_RPFC_RSTFLTSRW. */ +#define BM_RCM_RPFC_RSTFLTSRW (0x03U) /*!< Bit mask for RCM_RPFC_RSTFLTSRW. */ +#define BS_RCM_RPFC_RSTFLTSRW (2U) /*!< Bit field size in bits for RCM_RPFC_RSTFLTSRW. */ + +/*! @brief Read current value of the RCM_RPFC_RSTFLTSRW field. */ +#define BR_RCM_RPFC_RSTFLTSRW(x) (HW_RCM_RPFC(x).B.RSTFLTSRW) + +/*! @brief Format value for bitfield RCM_RPFC_RSTFLTSRW. */ +#define BF_RCM_RPFC_RSTFLTSRW(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFC_RSTFLTSRW) & BM_RCM_RPFC_RSTFLTSRW) + +/*! @brief Set the RSTFLTSRW field to a new value. */ +#define BW_RCM_RPFC_RSTFLTSRW(x, v) (HW_RCM_RPFC_WR(x, (HW_RCM_RPFC_RD(x) & ~BM_RCM_RPFC_RSTFLTSRW) | BF_RCM_RPFC_RSTFLTSRW(v))) +/*@}*/ + +/*! + * @name Register RCM_RPFC, field RSTFLTSS[2] (RW) + * + * Selects how the reset pin filter is enabled in Stop and VLPS modes , and also + * during LLS and VLLS modes. On exit from VLLS mode, this bit should be + * reconfigured before clearing PMC_REGSC[ACKISO]. + * + * Values: + * - 0 - All filtering disabled + * - 1 - LPO clock filter enabled + */ +/*@{*/ +#define BP_RCM_RPFC_RSTFLTSS (2U) /*!< Bit position for RCM_RPFC_RSTFLTSS. */ +#define BM_RCM_RPFC_RSTFLTSS (0x04U) /*!< Bit mask for RCM_RPFC_RSTFLTSS. */ +#define BS_RCM_RPFC_RSTFLTSS (1U) /*!< Bit field size in bits for RCM_RPFC_RSTFLTSS. */ + +/*! @brief Read current value of the RCM_RPFC_RSTFLTSS field. */ +#define BR_RCM_RPFC_RSTFLTSS(x) (BITBAND_ACCESS8(HW_RCM_RPFC_ADDR(x), BP_RCM_RPFC_RSTFLTSS)) + +/*! @brief Format value for bitfield RCM_RPFC_RSTFLTSS. */ +#define BF_RCM_RPFC_RSTFLTSS(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFC_RSTFLTSS) & BM_RCM_RPFC_RSTFLTSS) + +/*! @brief Set the RSTFLTSS field to a new value. */ +#define BW_RCM_RPFC_RSTFLTSS(x, v) (BITBAND_ACCESS8(HW_RCM_RPFC_ADDR(x), BP_RCM_RPFC_RSTFLTSS) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RCM_RPFW - Reset Pin Filter Width register + ******************************************************************************/ + +/*! + * @brief HW_RCM_RPFW - Reset Pin Filter Width register (RW) + * + * Reset value: 0x00U + * + * The reset values of the bits in the RSTFLTSEL field are for Chip POR only. + * They are unaffected by other reset types. + */ +typedef union _hw_rcm_rpfw +{ + uint8_t U; + struct _hw_rcm_rpfw_bitfields + { + uint8_t RSTFLTSEL : 5; /*!< [4:0] Reset Pin Filter Bus Clock Select */ + uint8_t RESERVED0 : 3; /*!< [7:5] */ + } B; +} hw_rcm_rpfw_t; + +/*! + * @name Constants and macros for entire RCM_RPFW register + */ +/*@{*/ +#define HW_RCM_RPFW_ADDR(x) ((x) + 0x5U) + +#define HW_RCM_RPFW(x) (*(__IO hw_rcm_rpfw_t *) HW_RCM_RPFW_ADDR(x)) +#define HW_RCM_RPFW_RD(x) (HW_RCM_RPFW(x).U) +#define HW_RCM_RPFW_WR(x, v) (HW_RCM_RPFW(x).U = (v)) +#define HW_RCM_RPFW_SET(x, v) (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) | (v))) +#define HW_RCM_RPFW_CLR(x, v) (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) & ~(v))) +#define HW_RCM_RPFW_TOG(x, v) (HW_RCM_RPFW_WR(x, HW_RCM_RPFW_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RCM_RPFW bitfields + */ + +/*! + * @name Register RCM_RPFW, field RSTFLTSEL[4:0] (RW) + * + * Selects the reset pin bus clock filter width. + * + * Values: + * - 00000 - Bus clock filter count is 1 + * - 00001 - Bus clock filter count is 2 + * - 00010 - Bus clock filter count is 3 + * - 00011 - Bus clock filter count is 4 + * - 00100 - Bus clock filter count is 5 + * - 00101 - Bus clock filter count is 6 + * - 00110 - Bus clock filter count is 7 + * - 00111 - Bus clock filter count is 8 + * - 01000 - Bus clock filter count is 9 + * - 01001 - Bus clock filter count is 10 + * - 01010 - Bus clock filter count is 11 + * - 01011 - Bus clock filter count is 12 + * - 01100 - Bus clock filter count is 13 + * - 01101 - Bus clock filter count is 14 + * - 01110 - Bus clock filter count is 15 + * - 01111 - Bus clock filter count is 16 + * - 10000 - Bus clock filter count is 17 + * - 10001 - Bus clock filter count is 18 + * - 10010 - Bus clock filter count is 19 + * - 10011 - Bus clock filter count is 20 + * - 10100 - Bus clock filter count is 21 + * - 10101 - Bus clock filter count is 22 + * - 10110 - Bus clock filter count is 23 + * - 10111 - Bus clock filter count is 24 + * - 11000 - Bus clock filter count is 25 + * - 11001 - Bus clock filter count is 26 + * - 11010 - Bus clock filter count is 27 + * - 11011 - Bus clock filter count is 28 + * - 11100 - Bus clock filter count is 29 + * - 11101 - Bus clock filter count is 30 + * - 11110 - Bus clock filter count is 31 + * - 11111 - Bus clock filter count is 32 + */ +/*@{*/ +#define BP_RCM_RPFW_RSTFLTSEL (0U) /*!< Bit position for RCM_RPFW_RSTFLTSEL. */ +#define BM_RCM_RPFW_RSTFLTSEL (0x1FU) /*!< Bit mask for RCM_RPFW_RSTFLTSEL. */ +#define BS_RCM_RPFW_RSTFLTSEL (5U) /*!< Bit field size in bits for RCM_RPFW_RSTFLTSEL. */ + +/*! @brief Read current value of the RCM_RPFW_RSTFLTSEL field. */ +#define BR_RCM_RPFW_RSTFLTSEL(x) (HW_RCM_RPFW(x).B.RSTFLTSEL) + +/*! @brief Format value for bitfield RCM_RPFW_RSTFLTSEL. */ +#define BF_RCM_RPFW_RSTFLTSEL(v) ((uint8_t)((uint8_t)(v) << BP_RCM_RPFW_RSTFLTSEL) & BM_RCM_RPFW_RSTFLTSEL) + +/*! @brief Set the RSTFLTSEL field to a new value. */ +#define BW_RCM_RPFW_RSTFLTSEL(x, v) (HW_RCM_RPFW_WR(x, (HW_RCM_RPFW_RD(x) & ~BM_RCM_RPFW_RSTFLTSEL) | BF_RCM_RPFW_RSTFLTSEL(v))) +/*@}*/ + +/******************************************************************************* + * HW_RCM_MR - Mode Register + ******************************************************************************/ + +/*! + * @brief HW_RCM_MR - Mode Register (RO) + * + * Reset value: 0x00U + * + * This register includes read-only status flags to indicate the state of the + * mode pins during the last Chip Reset. + */ +typedef union _hw_rcm_mr +{ + uint8_t U; + struct _hw_rcm_mr_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t EZP_MS : 1; /*!< [1] EZP_MS_B pin state */ + uint8_t RESERVED1 : 6; /*!< [7:2] */ + } B; +} hw_rcm_mr_t; + +/*! + * @name Constants and macros for entire RCM_MR register + */ +/*@{*/ +#define HW_RCM_MR_ADDR(x) ((x) + 0x7U) + +#define HW_RCM_MR(x) (*(__I hw_rcm_mr_t *) HW_RCM_MR_ADDR(x)) +#define HW_RCM_MR_RD(x) (HW_RCM_MR(x).U) +/*@}*/ + +/* + * Constants & macros for individual RCM_MR bitfields + */ + +/*! + * @name Register RCM_MR, field EZP_MS[1] (RO) + * + * Reflects the state of the EZP_MS pin during the last Chip Reset + * + * Values: + * - 0 - Pin deasserted (logic 1) + * - 1 - Pin asserted (logic 0) + */ +/*@{*/ +#define BP_RCM_MR_EZP_MS (1U) /*!< Bit position for RCM_MR_EZP_MS. */ +#define BM_RCM_MR_EZP_MS (0x02U) /*!< Bit mask for RCM_MR_EZP_MS. */ +#define BS_RCM_MR_EZP_MS (1U) /*!< Bit field size in bits for RCM_MR_EZP_MS. */ + +/*! @brief Read current value of the RCM_MR_EZP_MS field. */ +#define BR_RCM_MR_EZP_MS(x) (BITBAND_ACCESS8(HW_RCM_MR_ADDR(x), BP_RCM_MR_EZP_MS)) +/*@}*/ + +/******************************************************************************* + * HW_RCM_SSRS0 - Sticky System Reset Status Register 0 + ******************************************************************************/ + +/*! + * @brief HW_RCM_SSRS0 - Sticky System Reset Status Register 0 (RW) + * + * Reset value: 0x82U + * + * This register includes status flags to indicate all reset sources since the + * last POR, LVD or VLLS Wakeup that have not been cleared by software. Software + * can clear the status flags by writing a logic one to a flag. + */ +typedef union _hw_rcm_ssrs0 +{ + uint8_t U; + struct _hw_rcm_ssrs0_bitfields + { + uint8_t SWAKEUP : 1; /*!< [0] Sticky Low Leakage Wakeup Reset */ + uint8_t SLVD : 1; /*!< [1] Sticky Low-Voltage Detect Reset */ + uint8_t SLOC : 1; /*!< [2] Sticky Loss-of-Clock Reset */ + uint8_t SLOL : 1; /*!< [3] Sticky Loss-of-Lock Reset */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t SWDOG : 1; /*!< [5] Sticky Watchdog */ + uint8_t SPIN : 1; /*!< [6] Sticky External Reset Pin */ + uint8_t SPOR : 1; /*!< [7] Sticky Power-On Reset */ + } B; +} hw_rcm_ssrs0_t; + +/*! + * @name Constants and macros for entire RCM_SSRS0 register + */ +/*@{*/ +#define HW_RCM_SSRS0_ADDR(x) ((x) + 0x8U) + +#define HW_RCM_SSRS0(x) (*(__IO hw_rcm_ssrs0_t *) HW_RCM_SSRS0_ADDR(x)) +#define HW_RCM_SSRS0_RD(x) (HW_RCM_SSRS0(x).U) +#define HW_RCM_SSRS0_WR(x, v) (HW_RCM_SSRS0(x).U = (v)) +#define HW_RCM_SSRS0_SET(x, v) (HW_RCM_SSRS0_WR(x, HW_RCM_SSRS0_RD(x) | (v))) +#define HW_RCM_SSRS0_CLR(x, v) (HW_RCM_SSRS0_WR(x, HW_RCM_SSRS0_RD(x) & ~(v))) +#define HW_RCM_SSRS0_TOG(x, v) (HW_RCM_SSRS0_WR(x, HW_RCM_SSRS0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RCM_SSRS0 bitfields + */ + +/*! + * @name Register RCM_SSRS0, field SWAKEUP[0] (W1C) + * + * Indicates a reset has been caused by an enabled LLWU modulewakeup source + * while the chip was in a low leakage mode. In LLS mode, the RESET pin is the only + * wakeup source that can cause this reset. Any enabled wakeup source in a VLLSx + * mode causes a reset. + * + * Values: + * - 0 - Reset not caused by LLWU module wakeup source + * - 1 - Reset caused by LLWU module wakeup source + */ +/*@{*/ +#define BP_RCM_SSRS0_SWAKEUP (0U) /*!< Bit position for RCM_SSRS0_SWAKEUP. */ +#define BM_RCM_SSRS0_SWAKEUP (0x01U) /*!< Bit mask for RCM_SSRS0_SWAKEUP. */ +#define BS_RCM_SSRS0_SWAKEUP (1U) /*!< Bit field size in bits for RCM_SSRS0_SWAKEUP. */ + +/*! @brief Read current value of the RCM_SSRS0_SWAKEUP field. */ +#define BR_RCM_SSRS0_SWAKEUP(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SWAKEUP)) + +/*! @brief Format value for bitfield RCM_SSRS0_SWAKEUP. */ +#define BF_RCM_SSRS0_SWAKEUP(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SWAKEUP) & BM_RCM_SSRS0_SWAKEUP) + +/*! @brief Set the SWAKEUP field to a new value. */ +#define BW_RCM_SSRS0_SWAKEUP(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SWAKEUP) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SLVD[1] (W1C) + * + * If PMC_LVDSC1[LVDRE] is set and the supply drops below the LVD trip voltage, + * an LVD reset occurs. This field is also set by POR. + * + * Values: + * - 0 - Reset not caused by LVD trip or POR + * - 1 - Reset caused by LVD trip or POR + */ +/*@{*/ +#define BP_RCM_SSRS0_SLVD (1U) /*!< Bit position for RCM_SSRS0_SLVD. */ +#define BM_RCM_SSRS0_SLVD (0x02U) /*!< Bit mask for RCM_SSRS0_SLVD. */ +#define BS_RCM_SSRS0_SLVD (1U) /*!< Bit field size in bits for RCM_SSRS0_SLVD. */ + +/*! @brief Read current value of the RCM_SSRS0_SLVD field. */ +#define BR_RCM_SSRS0_SLVD(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLVD)) + +/*! @brief Format value for bitfield RCM_SSRS0_SLVD. */ +#define BF_RCM_SSRS0_SLVD(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SLVD) & BM_RCM_SSRS0_SLVD) + +/*! @brief Set the SLVD field to a new value. */ +#define BW_RCM_SSRS0_SLVD(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLVD) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SLOC[2] (W1C) + * + * Indicates a reset has been caused by a loss of external clock. The MCG clock + * monitor must be enabled for a loss of clock to be detected. Refer to the + * detailed MCG description for information on enabling the clock monitor. + * + * Values: + * - 0 - Reset not caused by a loss of external clock. + * - 1 - Reset caused by a loss of external clock. + */ +/*@{*/ +#define BP_RCM_SSRS0_SLOC (2U) /*!< Bit position for RCM_SSRS0_SLOC. */ +#define BM_RCM_SSRS0_SLOC (0x04U) /*!< Bit mask for RCM_SSRS0_SLOC. */ +#define BS_RCM_SSRS0_SLOC (1U) /*!< Bit field size in bits for RCM_SSRS0_SLOC. */ + +/*! @brief Read current value of the RCM_SSRS0_SLOC field. */ +#define BR_RCM_SSRS0_SLOC(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLOC)) + +/*! @brief Format value for bitfield RCM_SSRS0_SLOC. */ +#define BF_RCM_SSRS0_SLOC(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SLOC) & BM_RCM_SSRS0_SLOC) + +/*! @brief Set the SLOC field to a new value. */ +#define BW_RCM_SSRS0_SLOC(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLOC) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SLOL[3] (W1C) + * + * Indicates a reset has been caused by a loss of lock in the MCG PLL. See the + * MCG description for information on the loss-of-clock event. + * + * Values: + * - 0 - Reset not caused by a loss of lock in the PLL + * - 1 - Reset caused by a loss of lock in the PLL + */ +/*@{*/ +#define BP_RCM_SSRS0_SLOL (3U) /*!< Bit position for RCM_SSRS0_SLOL. */ +#define BM_RCM_SSRS0_SLOL (0x08U) /*!< Bit mask for RCM_SSRS0_SLOL. */ +#define BS_RCM_SSRS0_SLOL (1U) /*!< Bit field size in bits for RCM_SSRS0_SLOL. */ + +/*! @brief Read current value of the RCM_SSRS0_SLOL field. */ +#define BR_RCM_SSRS0_SLOL(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLOL)) + +/*! @brief Format value for bitfield RCM_SSRS0_SLOL. */ +#define BF_RCM_SSRS0_SLOL(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SLOL) & BM_RCM_SSRS0_SLOL) + +/*! @brief Set the SLOL field to a new value. */ +#define BW_RCM_SSRS0_SLOL(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SLOL) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SWDOG[5] (W1C) + * + * Indicates a reset has been caused by the watchdog timer timing out. This + * reset source can be blocked by disabling the watchdog. + * + * Values: + * - 0 - Reset not caused by watchdog timeout + * - 1 - Reset caused by watchdog timeout + */ +/*@{*/ +#define BP_RCM_SSRS0_SWDOG (5U) /*!< Bit position for RCM_SSRS0_SWDOG. */ +#define BM_RCM_SSRS0_SWDOG (0x20U) /*!< Bit mask for RCM_SSRS0_SWDOG. */ +#define BS_RCM_SSRS0_SWDOG (1U) /*!< Bit field size in bits for RCM_SSRS0_SWDOG. */ + +/*! @brief Read current value of the RCM_SSRS0_SWDOG field. */ +#define BR_RCM_SSRS0_SWDOG(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SWDOG)) + +/*! @brief Format value for bitfield RCM_SSRS0_SWDOG. */ +#define BF_RCM_SSRS0_SWDOG(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SWDOG) & BM_RCM_SSRS0_SWDOG) + +/*! @brief Set the SWDOG field to a new value. */ +#define BW_RCM_SSRS0_SWDOG(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SWDOG) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SPIN[6] (W1C) + * + * Indicates a reset has been caused by an active-low level on the external + * RESET pin. + * + * Values: + * - 0 - Reset not caused by external reset pin + * - 1 - Reset caused by external reset pin + */ +/*@{*/ +#define BP_RCM_SSRS0_SPIN (6U) /*!< Bit position for RCM_SSRS0_SPIN. */ +#define BM_RCM_SSRS0_SPIN (0x40U) /*!< Bit mask for RCM_SSRS0_SPIN. */ +#define BS_RCM_SSRS0_SPIN (1U) /*!< Bit field size in bits for RCM_SSRS0_SPIN. */ + +/*! @brief Read current value of the RCM_SSRS0_SPIN field. */ +#define BR_RCM_SSRS0_SPIN(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SPIN)) + +/*! @brief Format value for bitfield RCM_SSRS0_SPIN. */ +#define BF_RCM_SSRS0_SPIN(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SPIN) & BM_RCM_SSRS0_SPIN) + +/*! @brief Set the SPIN field to a new value. */ +#define BW_RCM_SSRS0_SPIN(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SPIN) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS0, field SPOR[7] (W1C) + * + * Indicates a reset has been caused by the power-on detection logic. Because + * the internal supply voltage was ramping up at the time, the low-voltage reset + * (LVD) status bit is also set to indicate that the reset occurred while the + * internal supply was below the LVD threshold. + * + * Values: + * - 0 - Reset not caused by POR + * - 1 - Reset caused by POR + */ +/*@{*/ +#define BP_RCM_SSRS0_SPOR (7U) /*!< Bit position for RCM_SSRS0_SPOR. */ +#define BM_RCM_SSRS0_SPOR (0x80U) /*!< Bit mask for RCM_SSRS0_SPOR. */ +#define BS_RCM_SSRS0_SPOR (1U) /*!< Bit field size in bits for RCM_SSRS0_SPOR. */ + +/*! @brief Read current value of the RCM_SSRS0_SPOR field. */ +#define BR_RCM_SSRS0_SPOR(x) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SPOR)) + +/*! @brief Format value for bitfield RCM_SSRS0_SPOR. */ +#define BF_RCM_SSRS0_SPOR(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS0_SPOR) & BM_RCM_SSRS0_SPOR) + +/*! @brief Set the SPOR field to a new value. */ +#define BW_RCM_SSRS0_SPOR(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS0_ADDR(x), BP_RCM_SSRS0_SPOR) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RCM_SSRS1 - Sticky System Reset Status Register 1 + ******************************************************************************/ + +/*! + * @brief HW_RCM_SSRS1 - Sticky System Reset Status Register 1 (RW) + * + * Reset value: 0x00U + * + * This register includes status flags to indicate all reset sources since the + * last POR, LVD or VLLS Wakeup that have not been cleared by software. Software + * can clear the status flags by writing a logic one to a flag. + */ +typedef union _hw_rcm_ssrs1 +{ + uint8_t U; + struct _hw_rcm_ssrs1_bitfields + { + uint8_t SJTAG : 1; /*!< [0] Sticky JTAG Generated Reset */ + uint8_t SLOCKUP : 1; /*!< [1] Sticky Core Lockup */ + uint8_t SSW : 1; /*!< [2] Sticky Software */ + uint8_t SMDM_AP : 1; /*!< [3] Sticky MDM-AP System Reset Request */ + uint8_t SEZPT : 1; /*!< [4] Sticky EzPort Reset */ + uint8_t SSACKERR : 1; /*!< [5] Sticky Stop Mode Acknowledge Error + * Reset */ + uint8_t RESERVED0 : 2; /*!< [7:6] */ + } B; +} hw_rcm_ssrs1_t; + +/*! + * @name Constants and macros for entire RCM_SSRS1 register + */ +/*@{*/ +#define HW_RCM_SSRS1_ADDR(x) ((x) + 0x9U) + +#define HW_RCM_SSRS1(x) (*(__IO hw_rcm_ssrs1_t *) HW_RCM_SSRS1_ADDR(x)) +#define HW_RCM_SSRS1_RD(x) (HW_RCM_SSRS1(x).U) +#define HW_RCM_SSRS1_WR(x, v) (HW_RCM_SSRS1(x).U = (v)) +#define HW_RCM_SSRS1_SET(x, v) (HW_RCM_SSRS1_WR(x, HW_RCM_SSRS1_RD(x) | (v))) +#define HW_RCM_SSRS1_CLR(x, v) (HW_RCM_SSRS1_WR(x, HW_RCM_SSRS1_RD(x) & ~(v))) +#define HW_RCM_SSRS1_TOG(x, v) (HW_RCM_SSRS1_WR(x, HW_RCM_SSRS1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RCM_SSRS1 bitfields + */ + +/*! + * @name Register RCM_SSRS1, field SJTAG[0] (W1C) + * + * Indicates a reset has been caused by JTAG selection of certain IR codes: + * EZPORT, EXTEST, HIGHZ, and CLAMP. + * + * Values: + * - 0 - Reset not caused by JTAG + * - 1 - Reset caused by JTAG + */ +/*@{*/ +#define BP_RCM_SSRS1_SJTAG (0U) /*!< Bit position for RCM_SSRS1_SJTAG. */ +#define BM_RCM_SSRS1_SJTAG (0x01U) /*!< Bit mask for RCM_SSRS1_SJTAG. */ +#define BS_RCM_SSRS1_SJTAG (1U) /*!< Bit field size in bits for RCM_SSRS1_SJTAG. */ + +/*! @brief Read current value of the RCM_SSRS1_SJTAG field. */ +#define BR_RCM_SSRS1_SJTAG(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SJTAG)) + +/*! @brief Format value for bitfield RCM_SSRS1_SJTAG. */ +#define BF_RCM_SSRS1_SJTAG(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SJTAG) & BM_RCM_SSRS1_SJTAG) + +/*! @brief Set the SJTAG field to a new value. */ +#define BW_RCM_SSRS1_SJTAG(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SJTAG) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS1, field SLOCKUP[1] (W1C) + * + * Indicates a reset has been caused by the ARM core indication of a LOCKUP + * event. + * + * Values: + * - 0 - Reset not caused by core LOCKUP event + * - 1 - Reset caused by core LOCKUP event + */ +/*@{*/ +#define BP_RCM_SSRS1_SLOCKUP (1U) /*!< Bit position for RCM_SSRS1_SLOCKUP. */ +#define BM_RCM_SSRS1_SLOCKUP (0x02U) /*!< Bit mask for RCM_SSRS1_SLOCKUP. */ +#define BS_RCM_SSRS1_SLOCKUP (1U) /*!< Bit field size in bits for RCM_SSRS1_SLOCKUP. */ + +/*! @brief Read current value of the RCM_SSRS1_SLOCKUP field. */ +#define BR_RCM_SSRS1_SLOCKUP(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SLOCKUP)) + +/*! @brief Format value for bitfield RCM_SSRS1_SLOCKUP. */ +#define BF_RCM_SSRS1_SLOCKUP(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SLOCKUP) & BM_RCM_SSRS1_SLOCKUP) + +/*! @brief Set the SLOCKUP field to a new value. */ +#define BW_RCM_SSRS1_SLOCKUP(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SLOCKUP) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS1, field SSW[2] (W1C) + * + * Indicates a reset has been caused by software setting of SYSRESETREQ bit in + * Application Interrupt and Reset Control Register in the ARM core. + * + * Values: + * - 0 - Reset not caused by software setting of SYSRESETREQ bit + * - 1 - Reset caused by software setting of SYSRESETREQ bit + */ +/*@{*/ +#define BP_RCM_SSRS1_SSW (2U) /*!< Bit position for RCM_SSRS1_SSW. */ +#define BM_RCM_SSRS1_SSW (0x04U) /*!< Bit mask for RCM_SSRS1_SSW. */ +#define BS_RCM_SSRS1_SSW (1U) /*!< Bit field size in bits for RCM_SSRS1_SSW. */ + +/*! @brief Read current value of the RCM_SSRS1_SSW field. */ +#define BR_RCM_SSRS1_SSW(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SSW)) + +/*! @brief Format value for bitfield RCM_SSRS1_SSW. */ +#define BF_RCM_SSRS1_SSW(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SSW) & BM_RCM_SSRS1_SSW) + +/*! @brief Set the SSW field to a new value. */ +#define BW_RCM_SSRS1_SSW(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SSW) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS1, field SMDM_AP[3] (W1C) + * + * Indicates a reset has been caused by the host debugger system setting of the + * System Reset Request bit in the MDM-AP Control Register. + * + * Values: + * - 0 - Reset not caused by host debugger system setting of the System Reset + * Request bit + * - 1 - Reset caused by host debugger system setting of the System Reset + * Request bit + */ +/*@{*/ +#define BP_RCM_SSRS1_SMDM_AP (3U) /*!< Bit position for RCM_SSRS1_SMDM_AP. */ +#define BM_RCM_SSRS1_SMDM_AP (0x08U) /*!< Bit mask for RCM_SSRS1_SMDM_AP. */ +#define BS_RCM_SSRS1_SMDM_AP (1U) /*!< Bit field size in bits for RCM_SSRS1_SMDM_AP. */ + +/*! @brief Read current value of the RCM_SSRS1_SMDM_AP field. */ +#define BR_RCM_SSRS1_SMDM_AP(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SMDM_AP)) + +/*! @brief Format value for bitfield RCM_SSRS1_SMDM_AP. */ +#define BF_RCM_SSRS1_SMDM_AP(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SMDM_AP) & BM_RCM_SSRS1_SMDM_AP) + +/*! @brief Set the SMDM_AP field to a new value. */ +#define BW_RCM_SSRS1_SMDM_AP(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SMDM_AP) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS1, field SEZPT[4] (W1C) + * + * Indicates a reset has been caused by EzPort receiving the RESET command while + * the device is in EzPort mode. + * + * Values: + * - 0 - Reset not caused by EzPort receiving the RESET command while the device + * is in EzPort mode + * - 1 - Reset caused by EzPort receiving the RESET command while the device is + * in EzPort mode + */ +/*@{*/ +#define BP_RCM_SSRS1_SEZPT (4U) /*!< Bit position for RCM_SSRS1_SEZPT. */ +#define BM_RCM_SSRS1_SEZPT (0x10U) /*!< Bit mask for RCM_SSRS1_SEZPT. */ +#define BS_RCM_SSRS1_SEZPT (1U) /*!< Bit field size in bits for RCM_SSRS1_SEZPT. */ + +/*! @brief Read current value of the RCM_SSRS1_SEZPT field. */ +#define BR_RCM_SSRS1_SEZPT(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SEZPT)) + +/*! @brief Format value for bitfield RCM_SSRS1_SEZPT. */ +#define BF_RCM_SSRS1_SEZPT(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SEZPT) & BM_RCM_SSRS1_SEZPT) + +/*! @brief Set the SEZPT field to a new value. */ +#define BW_RCM_SSRS1_SEZPT(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SEZPT) = (v)) +/*@}*/ + +/*! + * @name Register RCM_SSRS1, field SSACKERR[5] (W1C) + * + * Indicates that after an attempt to enter Stop mode, a reset has been caused + * by a failure of one or more peripherals to acknowledge within approximately one + * second to enter stop mode. + * + * Values: + * - 0 - Reset not caused by peripheral failure to acknowledge attempt to enter + * stop mode + * - 1 - Reset caused by peripheral failure to acknowledge attempt to enter stop + * mode + */ +/*@{*/ +#define BP_RCM_SSRS1_SSACKERR (5U) /*!< Bit position for RCM_SSRS1_SSACKERR. */ +#define BM_RCM_SSRS1_SSACKERR (0x20U) /*!< Bit mask for RCM_SSRS1_SSACKERR. */ +#define BS_RCM_SSRS1_SSACKERR (1U) /*!< Bit field size in bits for RCM_SSRS1_SSACKERR. */ + +/*! @brief Read current value of the RCM_SSRS1_SSACKERR field. */ +#define BR_RCM_SSRS1_SSACKERR(x) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SSACKERR)) + +/*! @brief Format value for bitfield RCM_SSRS1_SSACKERR. */ +#define BF_RCM_SSRS1_SSACKERR(v) ((uint8_t)((uint8_t)(v) << BP_RCM_SSRS1_SSACKERR) & BM_RCM_SSRS1_SSACKERR) + +/*! @brief Set the SSACKERR field to a new value. */ +#define BW_RCM_SSRS1_SSACKERR(x, v) (BITBAND_ACCESS8(HW_RCM_SSRS1_ADDR(x), BP_RCM_SSRS1_SSACKERR) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_rcm_t - module struct + ******************************************************************************/ +/*! + * @brief All RCM module registers. + */ +#pragma pack(1) +typedef struct _hw_rcm +{ + __I hw_rcm_srs0_t SRS0; /*!< [0x0] System Reset Status Register 0 */ + __I hw_rcm_srs1_t SRS1; /*!< [0x1] System Reset Status Register 1 */ + uint8_t _reserved0[2]; + __IO hw_rcm_rpfc_t RPFC; /*!< [0x4] Reset Pin Filter Control register */ + __IO hw_rcm_rpfw_t RPFW; /*!< [0x5] Reset Pin Filter Width register */ + uint8_t _reserved1[1]; + __I hw_rcm_mr_t MR; /*!< [0x7] Mode Register */ + __IO hw_rcm_ssrs0_t SSRS0; /*!< [0x8] Sticky System Reset Status Register 0 */ + __IO hw_rcm_ssrs1_t SSRS1; /*!< [0x9] Sticky System Reset Status Register 1 */ +} hw_rcm_t; +#pragma pack() + +/*! @brief Macro to access all RCM registers. */ +/*! @param x RCM module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_RCM(RCM_BASE)</code>. */ +#define HW_RCM(x) (*(hw_rcm_t *)(x)) + +#endif /* __HW_RCM_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfsys.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfsys.h new file mode 100644 index 0000000000..bcc4c095b0 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfsys.h @@ -0,0 +1,239 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_RFSYS_REGISTERS_H__ +#define __HW_RFSYS_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 RFSYS + * + * System register file + * + * Registers defined in this header file: + * - HW_RFSYS_REGn - Register file register + * + * - hw_rfsys_t - Struct containing all module registers. + */ + +#define HW_RFSYS_INSTANCE_COUNT (1U) /*!< Number of instances of the RFSYS module. */ + +/******************************************************************************* + * HW_RFSYS_REGn - Register file register + ******************************************************************************/ + +/*! + * @brief HW_RFSYS_REGn - Register file register (RW) + * + * Reset value: 0x00000000U + * + * Each register can be accessed as 8-, 16-, or 32-bits. + */ +typedef union _hw_rfsys_regn +{ + uint32_t U; + struct _hw_rfsys_regn_bitfields + { + uint32_t LL : 8; /*!< [7:0] */ + uint32_t LH : 8; /*!< [15:8] */ + uint32_t HL : 8; /*!< [23:16] */ + uint32_t HH : 8; /*!< [31:24] */ + } B; +} hw_rfsys_regn_t; + +/*! + * @name Constants and macros for entire RFSYS_REGn register + */ +/*@{*/ +#define HW_RFSYS_REGn_COUNT (8U) + +#define HW_RFSYS_REGn_ADDR(x, n) ((x) + 0x0U + (0x4U * (n))) + +#define HW_RFSYS_REGn(x, n) (*(__IO hw_rfsys_regn_t *) HW_RFSYS_REGn_ADDR(x, n)) +#define HW_RFSYS_REGn_RD(x, n) (HW_RFSYS_REGn(x, n).U) +#define HW_RFSYS_REGn_WR(x, n, v) (HW_RFSYS_REGn(x, n).U = (v)) +#define HW_RFSYS_REGn_SET(x, n, v) (HW_RFSYS_REGn_WR(x, n, HW_RFSYS_REGn_RD(x, n) | (v))) +#define HW_RFSYS_REGn_CLR(x, n, v) (HW_RFSYS_REGn_WR(x, n, HW_RFSYS_REGn_RD(x, n) & ~(v))) +#define HW_RFSYS_REGn_TOG(x, n, v) (HW_RFSYS_REGn_WR(x, n, HW_RFSYS_REGn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RFSYS_REGn bitfields + */ + +/*! + * @name Register RFSYS_REGn, field LL[7:0] (RW) + * + * Low lower byte + */ +/*@{*/ +#define BP_RFSYS_REGn_LL (0U) /*!< Bit position for RFSYS_REGn_LL. */ +#define BM_RFSYS_REGn_LL (0x000000FFU) /*!< Bit mask for RFSYS_REGn_LL. */ +#define BS_RFSYS_REGn_LL (8U) /*!< Bit field size in bits for RFSYS_REGn_LL. */ + +/*! @brief Read current value of the RFSYS_REGn_LL field. */ +#define BR_RFSYS_REGn_LL(x, n) (HW_RFSYS_REGn(x, n).B.LL) + +/*! @brief Format value for bitfield RFSYS_REGn_LL. */ +#define BF_RFSYS_REGn_LL(v) ((uint32_t)((uint32_t)(v) << BP_RFSYS_REGn_LL) & BM_RFSYS_REGn_LL) + +/*! @brief Set the LL field to a new value. */ +#define BW_RFSYS_REGn_LL(x, n, v) (HW_RFSYS_REGn_WR(x, n, (HW_RFSYS_REGn_RD(x, n) & ~BM_RFSYS_REGn_LL) | BF_RFSYS_REGn_LL(v))) +/*@}*/ + +/*! + * @name Register RFSYS_REGn, field LH[15:8] (RW) + * + * Low higher byte + */ +/*@{*/ +#define BP_RFSYS_REGn_LH (8U) /*!< Bit position for RFSYS_REGn_LH. */ +#define BM_RFSYS_REGn_LH (0x0000FF00U) /*!< Bit mask for RFSYS_REGn_LH. */ +#define BS_RFSYS_REGn_LH (8U) /*!< Bit field size in bits for RFSYS_REGn_LH. */ + +/*! @brief Read current value of the RFSYS_REGn_LH field. */ +#define BR_RFSYS_REGn_LH(x, n) (HW_RFSYS_REGn(x, n).B.LH) + +/*! @brief Format value for bitfield RFSYS_REGn_LH. */ +#define BF_RFSYS_REGn_LH(v) ((uint32_t)((uint32_t)(v) << BP_RFSYS_REGn_LH) & BM_RFSYS_REGn_LH) + +/*! @brief Set the LH field to a new value. */ +#define BW_RFSYS_REGn_LH(x, n, v) (HW_RFSYS_REGn_WR(x, n, (HW_RFSYS_REGn_RD(x, n) & ~BM_RFSYS_REGn_LH) | BF_RFSYS_REGn_LH(v))) +/*@}*/ + +/*! + * @name Register RFSYS_REGn, field HL[23:16] (RW) + * + * High lower byte + */ +/*@{*/ +#define BP_RFSYS_REGn_HL (16U) /*!< Bit position for RFSYS_REGn_HL. */ +#define BM_RFSYS_REGn_HL (0x00FF0000U) /*!< Bit mask for RFSYS_REGn_HL. */ +#define BS_RFSYS_REGn_HL (8U) /*!< Bit field size in bits for RFSYS_REGn_HL. */ + +/*! @brief Read current value of the RFSYS_REGn_HL field. */ +#define BR_RFSYS_REGn_HL(x, n) (HW_RFSYS_REGn(x, n).B.HL) + +/*! @brief Format value for bitfield RFSYS_REGn_HL. */ +#define BF_RFSYS_REGn_HL(v) ((uint32_t)((uint32_t)(v) << BP_RFSYS_REGn_HL) & BM_RFSYS_REGn_HL) + +/*! @brief Set the HL field to a new value. */ +#define BW_RFSYS_REGn_HL(x, n, v) (HW_RFSYS_REGn_WR(x, n, (HW_RFSYS_REGn_RD(x, n) & ~BM_RFSYS_REGn_HL) | BF_RFSYS_REGn_HL(v))) +/*@}*/ + +/*! + * @name Register RFSYS_REGn, field HH[31:24] (RW) + * + * High higher byte + */ +/*@{*/ +#define BP_RFSYS_REGn_HH (24U) /*!< Bit position for RFSYS_REGn_HH. */ +#define BM_RFSYS_REGn_HH (0xFF000000U) /*!< Bit mask for RFSYS_REGn_HH. */ +#define BS_RFSYS_REGn_HH (8U) /*!< Bit field size in bits for RFSYS_REGn_HH. */ + +/*! @brief Read current value of the RFSYS_REGn_HH field. */ +#define BR_RFSYS_REGn_HH(x, n) (HW_RFSYS_REGn(x, n).B.HH) + +/*! @brief Format value for bitfield RFSYS_REGn_HH. */ +#define BF_RFSYS_REGn_HH(v) ((uint32_t)((uint32_t)(v) << BP_RFSYS_REGn_HH) & BM_RFSYS_REGn_HH) + +/*! @brief Set the HH field to a new value. */ +#define BW_RFSYS_REGn_HH(x, n, v) (HW_RFSYS_REGn_WR(x, n, (HW_RFSYS_REGn_RD(x, n) & ~BM_RFSYS_REGn_HH) | BF_RFSYS_REGn_HH(v))) +/*@}*/ + +/******************************************************************************* + * hw_rfsys_t - module struct + ******************************************************************************/ +/*! + * @brief All RFSYS module registers. + */ +#pragma pack(1) +typedef struct _hw_rfsys +{ + __IO hw_rfsys_regn_t REGn[8]; /*!< [0x0] Register file register */ +} hw_rfsys_t; +#pragma pack() + +/*! @brief Macro to access all RFSYS registers. */ +/*! @param x RFSYS module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_RFSYS(RFSYS_BASE)</code>. */ +#define HW_RFSYS(x) (*(hw_rfsys_t *)(x)) + +#endif /* __HW_RFSYS_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfvbat.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfvbat.h new file mode 100644 index 0000000000..6b2fc876f1 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rfvbat.h @@ -0,0 +1,239 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_RFVBAT_REGISTERS_H__ +#define __HW_RFVBAT_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 RFVBAT + * + * VBAT register file + * + * Registers defined in this header file: + * - HW_RFVBAT_REGn - VBAT register file register + * + * - hw_rfvbat_t - Struct containing all module registers. + */ + +#define HW_RFVBAT_INSTANCE_COUNT (1U) /*!< Number of instances of the RFVBAT module. */ + +/******************************************************************************* + * HW_RFVBAT_REGn - VBAT register file register + ******************************************************************************/ + +/*! + * @brief HW_RFVBAT_REGn - VBAT register file register (RW) + * + * Reset value: 0x00000000U + * + * Each register can be accessed as 8-, 16-, or 32-bits. + */ +typedef union _hw_rfvbat_regn +{ + uint32_t U; + struct _hw_rfvbat_regn_bitfields + { + uint32_t LL : 8; /*!< [7:0] */ + uint32_t LH : 8; /*!< [15:8] */ + uint32_t HL : 8; /*!< [23:16] */ + uint32_t HH : 8; /*!< [31:24] */ + } B; +} hw_rfvbat_regn_t; + +/*! + * @name Constants and macros for entire RFVBAT_REGn register + */ +/*@{*/ +#define HW_RFVBAT_REGn_COUNT (8U) + +#define HW_RFVBAT_REGn_ADDR(x, n) ((x) + 0x0U + (0x4U * (n))) + +#define HW_RFVBAT_REGn(x, n) (*(__IO hw_rfvbat_regn_t *) HW_RFVBAT_REGn_ADDR(x, n)) +#define HW_RFVBAT_REGn_RD(x, n) (HW_RFVBAT_REGn(x, n).U) +#define HW_RFVBAT_REGn_WR(x, n, v) (HW_RFVBAT_REGn(x, n).U = (v)) +#define HW_RFVBAT_REGn_SET(x, n, v) (HW_RFVBAT_REGn_WR(x, n, HW_RFVBAT_REGn_RD(x, n) | (v))) +#define HW_RFVBAT_REGn_CLR(x, n, v) (HW_RFVBAT_REGn_WR(x, n, HW_RFVBAT_REGn_RD(x, n) & ~(v))) +#define HW_RFVBAT_REGn_TOG(x, n, v) (HW_RFVBAT_REGn_WR(x, n, HW_RFVBAT_REGn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RFVBAT_REGn bitfields + */ + +/*! + * @name Register RFVBAT_REGn, field LL[7:0] (RW) + * + * Low lower byte + */ +/*@{*/ +#define BP_RFVBAT_REGn_LL (0U) /*!< Bit position for RFVBAT_REGn_LL. */ +#define BM_RFVBAT_REGn_LL (0x000000FFU) /*!< Bit mask for RFVBAT_REGn_LL. */ +#define BS_RFVBAT_REGn_LL (8U) /*!< Bit field size in bits for RFVBAT_REGn_LL. */ + +/*! @brief Read current value of the RFVBAT_REGn_LL field. */ +#define BR_RFVBAT_REGn_LL(x, n) (HW_RFVBAT_REGn(x, n).B.LL) + +/*! @brief Format value for bitfield RFVBAT_REGn_LL. */ +#define BF_RFVBAT_REGn_LL(v) ((uint32_t)((uint32_t)(v) << BP_RFVBAT_REGn_LL) & BM_RFVBAT_REGn_LL) + +/*! @brief Set the LL field to a new value. */ +#define BW_RFVBAT_REGn_LL(x, n, v) (HW_RFVBAT_REGn_WR(x, n, (HW_RFVBAT_REGn_RD(x, n) & ~BM_RFVBAT_REGn_LL) | BF_RFVBAT_REGn_LL(v))) +/*@}*/ + +/*! + * @name Register RFVBAT_REGn, field LH[15:8] (RW) + * + * Low higher byte + */ +/*@{*/ +#define BP_RFVBAT_REGn_LH (8U) /*!< Bit position for RFVBAT_REGn_LH. */ +#define BM_RFVBAT_REGn_LH (0x0000FF00U) /*!< Bit mask for RFVBAT_REGn_LH. */ +#define BS_RFVBAT_REGn_LH (8U) /*!< Bit field size in bits for RFVBAT_REGn_LH. */ + +/*! @brief Read current value of the RFVBAT_REGn_LH field. */ +#define BR_RFVBAT_REGn_LH(x, n) (HW_RFVBAT_REGn(x, n).B.LH) + +/*! @brief Format value for bitfield RFVBAT_REGn_LH. */ +#define BF_RFVBAT_REGn_LH(v) ((uint32_t)((uint32_t)(v) << BP_RFVBAT_REGn_LH) & BM_RFVBAT_REGn_LH) + +/*! @brief Set the LH field to a new value. */ +#define BW_RFVBAT_REGn_LH(x, n, v) (HW_RFVBAT_REGn_WR(x, n, (HW_RFVBAT_REGn_RD(x, n) & ~BM_RFVBAT_REGn_LH) | BF_RFVBAT_REGn_LH(v))) +/*@}*/ + +/*! + * @name Register RFVBAT_REGn, field HL[23:16] (RW) + * + * High lower byte + */ +/*@{*/ +#define BP_RFVBAT_REGn_HL (16U) /*!< Bit position for RFVBAT_REGn_HL. */ +#define BM_RFVBAT_REGn_HL (0x00FF0000U) /*!< Bit mask for RFVBAT_REGn_HL. */ +#define BS_RFVBAT_REGn_HL (8U) /*!< Bit field size in bits for RFVBAT_REGn_HL. */ + +/*! @brief Read current value of the RFVBAT_REGn_HL field. */ +#define BR_RFVBAT_REGn_HL(x, n) (HW_RFVBAT_REGn(x, n).B.HL) + +/*! @brief Format value for bitfield RFVBAT_REGn_HL. */ +#define BF_RFVBAT_REGn_HL(v) ((uint32_t)((uint32_t)(v) << BP_RFVBAT_REGn_HL) & BM_RFVBAT_REGn_HL) + +/*! @brief Set the HL field to a new value. */ +#define BW_RFVBAT_REGn_HL(x, n, v) (HW_RFVBAT_REGn_WR(x, n, (HW_RFVBAT_REGn_RD(x, n) & ~BM_RFVBAT_REGn_HL) | BF_RFVBAT_REGn_HL(v))) +/*@}*/ + +/*! + * @name Register RFVBAT_REGn, field HH[31:24] (RW) + * + * High higher byte + */ +/*@{*/ +#define BP_RFVBAT_REGn_HH (24U) /*!< Bit position for RFVBAT_REGn_HH. */ +#define BM_RFVBAT_REGn_HH (0xFF000000U) /*!< Bit mask for RFVBAT_REGn_HH. */ +#define BS_RFVBAT_REGn_HH (8U) /*!< Bit field size in bits for RFVBAT_REGn_HH. */ + +/*! @brief Read current value of the RFVBAT_REGn_HH field. */ +#define BR_RFVBAT_REGn_HH(x, n) (HW_RFVBAT_REGn(x, n).B.HH) + +/*! @brief Format value for bitfield RFVBAT_REGn_HH. */ +#define BF_RFVBAT_REGn_HH(v) ((uint32_t)((uint32_t)(v) << BP_RFVBAT_REGn_HH) & BM_RFVBAT_REGn_HH) + +/*! @brief Set the HH field to a new value. */ +#define BW_RFVBAT_REGn_HH(x, n, v) (HW_RFVBAT_REGn_WR(x, n, (HW_RFVBAT_REGn_RD(x, n) & ~BM_RFVBAT_REGn_HH) | BF_RFVBAT_REGn_HH(v))) +/*@}*/ + +/******************************************************************************* + * hw_rfvbat_t - module struct + ******************************************************************************/ +/*! + * @brief All RFVBAT module registers. + */ +#pragma pack(1) +typedef struct _hw_rfvbat +{ + __IO hw_rfvbat_regn_t REGn[8]; /*!< [0x0] VBAT register file register */ +} hw_rfvbat_t; +#pragma pack() + +/*! @brief Macro to access all RFVBAT registers. */ +/*! @param x RFVBAT module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_RFVBAT(RFVBAT_BASE)</code>. */ +#define HW_RFVBAT(x) (*(hw_rfvbat_t *)(x)) + +#endif /* __HW_RFVBAT_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rng.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rng.h new file mode 100644 index 0000000000..a0b13c986c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rng.h @@ -0,0 +1,587 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_RNG_REGISTERS_H__ +#define __HW_RNG_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 RNG + * + * Random Number Generator Accelerator + * + * Registers defined in this header file: + * - HW_RNG_CR - RNGA Control Register + * - HW_RNG_SR - RNGA Status Register + * - HW_RNG_ER - RNGA Entropy Register + * - HW_RNG_OR - RNGA Output Register + * + * - hw_rng_t - Struct containing all module registers. + */ + +#define HW_RNG_INSTANCE_COUNT (1U) /*!< Number of instances of the RNG module. */ + +/******************************************************************************* + * HW_RNG_CR - RNGA Control Register + ******************************************************************************/ + +/*! + * @brief HW_RNG_CR - RNGA Control Register (RW) + * + * Reset value: 0x00000000U + * + * Controls the operation of RNGA. + */ +typedef union _hw_rng_cr +{ + uint32_t U; + struct _hw_rng_cr_bitfields + { + uint32_t GO : 1; /*!< [0] Go */ + uint32_t HA : 1; /*!< [1] High Assurance */ + uint32_t INTM : 1; /*!< [2] Interrupt Mask */ + uint32_t CLRI : 1; /*!< [3] Clear Interrupt */ + uint32_t SLP : 1; /*!< [4] Sleep */ + uint32_t RESERVED0 : 27; /*!< [31:5] */ + } B; +} hw_rng_cr_t; + +/*! + * @name Constants and macros for entire RNG_CR register + */ +/*@{*/ +#define HW_RNG_CR_ADDR(x) ((x) + 0x0U) + +#define HW_RNG_CR(x) (*(__IO hw_rng_cr_t *) HW_RNG_CR_ADDR(x)) +#define HW_RNG_CR_RD(x) (HW_RNG_CR(x).U) +#define HW_RNG_CR_WR(x, v) (HW_RNG_CR(x).U = (v)) +#define HW_RNG_CR_SET(x, v) (HW_RNG_CR_WR(x, HW_RNG_CR_RD(x) | (v))) +#define HW_RNG_CR_CLR(x, v) (HW_RNG_CR_WR(x, HW_RNG_CR_RD(x) & ~(v))) +#define HW_RNG_CR_TOG(x, v) (HW_RNG_CR_WR(x, HW_RNG_CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RNG_CR bitfields + */ + +/*! + * @name Register RNG_CR, field GO[0] (RW) + * + * Specifies whether random-data generation and loading (into OR[RANDOUT]) is + * enabled.This field is sticky. You must reset RNGA to stop RNGA from loading + * OR[RANDOUT] with data. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_RNG_CR_GO (0U) /*!< Bit position for RNG_CR_GO. */ +#define BM_RNG_CR_GO (0x00000001U) /*!< Bit mask for RNG_CR_GO. */ +#define BS_RNG_CR_GO (1U) /*!< Bit field size in bits for RNG_CR_GO. */ + +/*! @brief Read current value of the RNG_CR_GO field. */ +#define BR_RNG_CR_GO(x) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_GO)) + +/*! @brief Format value for bitfield RNG_CR_GO. */ +#define BF_RNG_CR_GO(v) ((uint32_t)((uint32_t)(v) << BP_RNG_CR_GO) & BM_RNG_CR_GO) + +/*! @brief Set the GO field to a new value. */ +#define BW_RNG_CR_GO(x, v) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_GO) = (v)) +/*@}*/ + +/*! + * @name Register RNG_CR, field HA[1] (RW) + * + * Enables notification of security violations (via SR[SECV]). A security + * violation occurs when you read OR[RANDOUT] and SR[OREG_LVL]=0. This field is sticky. + * After enabling notification of security violations, you must reset RNGA to + * disable them again. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_RNG_CR_HA (1U) /*!< Bit position for RNG_CR_HA. */ +#define BM_RNG_CR_HA (0x00000002U) /*!< Bit mask for RNG_CR_HA. */ +#define BS_RNG_CR_HA (1U) /*!< Bit field size in bits for RNG_CR_HA. */ + +/*! @brief Read current value of the RNG_CR_HA field. */ +#define BR_RNG_CR_HA(x) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_HA)) + +/*! @brief Format value for bitfield RNG_CR_HA. */ +#define BF_RNG_CR_HA(v) ((uint32_t)((uint32_t)(v) << BP_RNG_CR_HA) & BM_RNG_CR_HA) + +/*! @brief Set the HA field to a new value. */ +#define BW_RNG_CR_HA(x, v) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_HA) = (v)) +/*@}*/ + +/*! + * @name Register RNG_CR, field INTM[2] (RW) + * + * Masks the triggering of an error interrupt to the interrupt controller when + * an OR underflow condition occurs. An OR underflow condition occurs when you + * read OR[RANDOUT] and SR[OREG_LVL]=0. See the Output Register (OR) description. + * + * Values: + * - 0 - Not masked + * - 1 - Masked + */ +/*@{*/ +#define BP_RNG_CR_INTM (2U) /*!< Bit position for RNG_CR_INTM. */ +#define BM_RNG_CR_INTM (0x00000004U) /*!< Bit mask for RNG_CR_INTM. */ +#define BS_RNG_CR_INTM (1U) /*!< Bit field size in bits for RNG_CR_INTM. */ + +/*! @brief Read current value of the RNG_CR_INTM field. */ +#define BR_RNG_CR_INTM(x) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_INTM)) + +/*! @brief Format value for bitfield RNG_CR_INTM. */ +#define BF_RNG_CR_INTM(v) ((uint32_t)((uint32_t)(v) << BP_RNG_CR_INTM) & BM_RNG_CR_INTM) + +/*! @brief Set the INTM field to a new value. */ +#define BW_RNG_CR_INTM(x, v) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_INTM) = (v)) +/*@}*/ + +/*! + * @name Register RNG_CR, field CLRI[3] (WORZ) + * + * Clears the interrupt by resetting the error-interrupt indicator (SR[ERRI]). + * + * Values: + * - 0 - Do not clear the interrupt. + * - 1 - Clear the interrupt. When you write 1 to this field, RNGA then resets + * the error-interrupt indicator (SR[ERRI]). This bit always reads as 0. + */ +/*@{*/ +#define BP_RNG_CR_CLRI (3U) /*!< Bit position for RNG_CR_CLRI. */ +#define BM_RNG_CR_CLRI (0x00000008U) /*!< Bit mask for RNG_CR_CLRI. */ +#define BS_RNG_CR_CLRI (1U) /*!< Bit field size in bits for RNG_CR_CLRI. */ + +/*! @brief Format value for bitfield RNG_CR_CLRI. */ +#define BF_RNG_CR_CLRI(v) ((uint32_t)((uint32_t)(v) << BP_RNG_CR_CLRI) & BM_RNG_CR_CLRI) + +/*! @brief Set the CLRI field to a new value. */ +#define BW_RNG_CR_CLRI(x, v) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_CLRI) = (v)) +/*@}*/ + +/*! + * @name Register RNG_CR, field SLP[4] (RW) + * + * Specifies whether RNGA is in Sleep or Normal mode. You can also enter Sleep + * mode by asserting the DOZE signal. + * + * Values: + * - 0 - Normal mode + * - 1 - Sleep (low-power) mode + */ +/*@{*/ +#define BP_RNG_CR_SLP (4U) /*!< Bit position for RNG_CR_SLP. */ +#define BM_RNG_CR_SLP (0x00000010U) /*!< Bit mask for RNG_CR_SLP. */ +#define BS_RNG_CR_SLP (1U) /*!< Bit field size in bits for RNG_CR_SLP. */ + +/*! @brief Read current value of the RNG_CR_SLP field. */ +#define BR_RNG_CR_SLP(x) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_SLP)) + +/*! @brief Format value for bitfield RNG_CR_SLP. */ +#define BF_RNG_CR_SLP(v) ((uint32_t)((uint32_t)(v) << BP_RNG_CR_SLP) & BM_RNG_CR_SLP) + +/*! @brief Set the SLP field to a new value. */ +#define BW_RNG_CR_SLP(x, v) (BITBAND_ACCESS32(HW_RNG_CR_ADDR(x), BP_RNG_CR_SLP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RNG_SR - RNGA Status Register + ******************************************************************************/ + +/*! + * @brief HW_RNG_SR - RNGA Status Register (RO) + * + * Reset value: 0x00010000U + * + * Indicates the status of RNGA. This register is read-only. + */ +typedef union _hw_rng_sr +{ + uint32_t U; + struct _hw_rng_sr_bitfields + { + uint32_t SECV : 1; /*!< [0] Security Violation */ + uint32_t LRS : 1; /*!< [1] Last Read Status */ + uint32_t ORU : 1; /*!< [2] Output Register Underflow */ + uint32_t ERRI : 1; /*!< [3] Error Interrupt */ + uint32_t SLP : 1; /*!< [4] Sleep */ + uint32_t RESERVED0 : 3; /*!< [7:5] */ + uint32_t OREG_LVL : 8; /*!< [15:8] Output Register Level */ + uint32_t OREG_SIZE : 8; /*!< [23:16] Output Register Size */ + uint32_t RESERVED1 : 8; /*!< [31:24] */ + } B; +} hw_rng_sr_t; + +/*! + * @name Constants and macros for entire RNG_SR register + */ +/*@{*/ +#define HW_RNG_SR_ADDR(x) ((x) + 0x4U) + +#define HW_RNG_SR(x) (*(__I hw_rng_sr_t *) HW_RNG_SR_ADDR(x)) +#define HW_RNG_SR_RD(x) (HW_RNG_SR(x).U) +/*@}*/ + +/* + * Constants & macros for individual RNG_SR bitfields + */ + +/*! + * @name Register RNG_SR, field SECV[0] (RO) + * + * Used only when high assurance is enabled (CR[HA]). Indicates that a security + * violation has occurred.This field is sticky. To clear SR[SECV], you must reset + * RNGA. + * + * Values: + * - 0 - No security violation + * - 1 - Security violation + */ +/*@{*/ +#define BP_RNG_SR_SECV (0U) /*!< Bit position for RNG_SR_SECV. */ +#define BM_RNG_SR_SECV (0x00000001U) /*!< Bit mask for RNG_SR_SECV. */ +#define BS_RNG_SR_SECV (1U) /*!< Bit field size in bits for RNG_SR_SECV. */ + +/*! @brief Read current value of the RNG_SR_SECV field. */ +#define BR_RNG_SR_SECV(x) (BITBAND_ACCESS32(HW_RNG_SR_ADDR(x), BP_RNG_SR_SECV)) +/*@}*/ + +/*! + * @name Register RNG_SR, field LRS[1] (RO) + * + * Indicates whether the most recent read of OR[RANDOUT] caused an OR underflow + * condition, regardless of whether the error interrupt is masked (CR[INTM]). An + * OR underflow condition occurs when you read OR[RANDOUT] and SR[OREG_LVL]=0. + * After you read this register, RNGA writes 0 to this field. + * + * Values: + * - 0 - No underflow + * - 1 - Underflow + */ +/*@{*/ +#define BP_RNG_SR_LRS (1U) /*!< Bit position for RNG_SR_LRS. */ +#define BM_RNG_SR_LRS (0x00000002U) /*!< Bit mask for RNG_SR_LRS. */ +#define BS_RNG_SR_LRS (1U) /*!< Bit field size in bits for RNG_SR_LRS. */ + +/*! @brief Read current value of the RNG_SR_LRS field. */ +#define BR_RNG_SR_LRS(x) (BITBAND_ACCESS32(HW_RNG_SR_ADDR(x), BP_RNG_SR_LRS)) +/*@}*/ + +/*! + * @name Register RNG_SR, field ORU[2] (RO) + * + * Indicates whether an OR underflow condition has occurred since you last read + * this register (SR) or RNGA was reset, regardless of whether the error + * interrupt is masked (CR[INTM]). An OR underflow condition occurs when you read + * OR[RANDOUT] and SR[OREG_LVL]=0. After you read this register, RNGA writes 0 to this + * field. + * + * Values: + * - 0 - No underflow + * - 1 - Underflow + */ +/*@{*/ +#define BP_RNG_SR_ORU (2U) /*!< Bit position for RNG_SR_ORU. */ +#define BM_RNG_SR_ORU (0x00000004U) /*!< Bit mask for RNG_SR_ORU. */ +#define BS_RNG_SR_ORU (1U) /*!< Bit field size in bits for RNG_SR_ORU. */ + +/*! @brief Read current value of the RNG_SR_ORU field. */ +#define BR_RNG_SR_ORU(x) (BITBAND_ACCESS32(HW_RNG_SR_ADDR(x), BP_RNG_SR_ORU)) +/*@}*/ + +/*! + * @name Register RNG_SR, field ERRI[3] (RO) + * + * Indicates whether an OR underflow condition has occurred since you last + * cleared the error interrupt (CR[CLRI]) or RNGA was reset, regardless of whether the + * error interrupt is masked (CR[INTM]). An OR underflow condition occurs when + * you read OR[RANDOUT] and SR[OREG_LVL]=0. After you reset the error-interrupt + * indicator (via CR[CLRI]), RNGA writes 0 to this field. + * + * Values: + * - 0 - No underflow + * - 1 - Underflow + */ +/*@{*/ +#define BP_RNG_SR_ERRI (3U) /*!< Bit position for RNG_SR_ERRI. */ +#define BM_RNG_SR_ERRI (0x00000008U) /*!< Bit mask for RNG_SR_ERRI. */ +#define BS_RNG_SR_ERRI (1U) /*!< Bit field size in bits for RNG_SR_ERRI. */ + +/*! @brief Read current value of the RNG_SR_ERRI field. */ +#define BR_RNG_SR_ERRI(x) (BITBAND_ACCESS32(HW_RNG_SR_ADDR(x), BP_RNG_SR_ERRI)) +/*@}*/ + +/*! + * @name Register RNG_SR, field SLP[4] (RO) + * + * Specifies whether RNGA is in Sleep or Normal mode. You can also enter Sleep + * mode by asserting the DOZE signal. + * + * Values: + * - 0 - Normal mode + * - 1 - Sleep (low-power) mode + */ +/*@{*/ +#define BP_RNG_SR_SLP (4U) /*!< Bit position for RNG_SR_SLP. */ +#define BM_RNG_SR_SLP (0x00000010U) /*!< Bit mask for RNG_SR_SLP. */ +#define BS_RNG_SR_SLP (1U) /*!< Bit field size in bits for RNG_SR_SLP. */ + +/*! @brief Read current value of the RNG_SR_SLP field. */ +#define BR_RNG_SR_SLP(x) (BITBAND_ACCESS32(HW_RNG_SR_ADDR(x), BP_RNG_SR_SLP)) +/*@}*/ + +/*! + * @name Register RNG_SR, field OREG_LVL[15:8] (RO) + * + * Indicates the number of random-data words that are in OR[RANDOUT], which + * indicates whether OR[RANDOUT] is valid.If you read OR[RANDOUT] when SR[OREG_LVL] + * is not 0, then the contents of a random number contained in OR[RANDOUT] are + * returned, and RNGA writes 0 to both OR[RANDOUT] and SR[OREG_LVL]. + * + * Values: + * - 0 - No words (empty) + * - 1 - One word (valid) + */ +/*@{*/ +#define BP_RNG_SR_OREG_LVL (8U) /*!< Bit position for RNG_SR_OREG_LVL. */ +#define BM_RNG_SR_OREG_LVL (0x0000FF00U) /*!< Bit mask for RNG_SR_OREG_LVL. */ +#define BS_RNG_SR_OREG_LVL (8U) /*!< Bit field size in bits for RNG_SR_OREG_LVL. */ + +/*! @brief Read current value of the RNG_SR_OREG_LVL field. */ +#define BR_RNG_SR_OREG_LVL(x) (HW_RNG_SR(x).B.OREG_LVL) +/*@}*/ + +/*! + * @name Register RNG_SR, field OREG_SIZE[23:16] (RO) + * + * Indicates the size of the Output (OR) register in terms of the number of + * 32-bit random-data words it can hold. + * + * Values: + * - 1 - One word (this value is fixed) + */ +/*@{*/ +#define BP_RNG_SR_OREG_SIZE (16U) /*!< Bit position for RNG_SR_OREG_SIZE. */ +#define BM_RNG_SR_OREG_SIZE (0x00FF0000U) /*!< Bit mask for RNG_SR_OREG_SIZE. */ +#define BS_RNG_SR_OREG_SIZE (8U) /*!< Bit field size in bits for RNG_SR_OREG_SIZE. */ + +/*! @brief Read current value of the RNG_SR_OREG_SIZE field. */ +#define BR_RNG_SR_OREG_SIZE(x) (HW_RNG_SR(x).B.OREG_SIZE) +/*@}*/ + +/******************************************************************************* + * HW_RNG_ER - RNGA Entropy Register + ******************************************************************************/ + +/*! + * @brief HW_RNG_ER - RNGA Entropy Register (WORZ) + * + * Reset value: 0x00000000U + * + * Specifies an entropy value that RNGA uses in addition to its ring oscillators + * to seed its pseudorandom algorithm. This is a write-only register; reads + * return all zeros. + */ +typedef union _hw_rng_er +{ + uint32_t U; + struct _hw_rng_er_bitfields + { + uint32_t EXT_ENT : 32; /*!< [31:0] External Entropy */ + } B; +} hw_rng_er_t; + +/*! + * @name Constants and macros for entire RNG_ER register + */ +/*@{*/ +#define HW_RNG_ER_ADDR(x) ((x) + 0x8U) + +#define HW_RNG_ER(x) (*(__O hw_rng_er_t *) HW_RNG_ER_ADDR(x)) +#define HW_RNG_ER_RD(x) (HW_RNG_ER(x).U) +#define HW_RNG_ER_WR(x, v) (HW_RNG_ER(x).U = (v)) +/*@}*/ + +/* + * Constants & macros for individual RNG_ER bitfields + */ + +/*! + * @name Register RNG_ER, field EXT_ENT[31:0] (WORZ) + * + * Specifies an entropy value that RNGA uses in addition to its ring oscillators + * to seed its pseudorandom algorithm.Specifying a value for this field is + * optional but recommended. You can write to this field at any time during operation. + */ +/*@{*/ +#define BP_RNG_ER_EXT_ENT (0U) /*!< Bit position for RNG_ER_EXT_ENT. */ +#define BM_RNG_ER_EXT_ENT (0xFFFFFFFFU) /*!< Bit mask for RNG_ER_EXT_ENT. */ +#define BS_RNG_ER_EXT_ENT (32U) /*!< Bit field size in bits for RNG_ER_EXT_ENT. */ + +/*! @brief Format value for bitfield RNG_ER_EXT_ENT. */ +#define BF_RNG_ER_EXT_ENT(v) ((uint32_t)((uint32_t)(v) << BP_RNG_ER_EXT_ENT) & BM_RNG_ER_EXT_ENT) + +/*! @brief Set the EXT_ENT field to a new value. */ +#define BW_RNG_ER_EXT_ENT(x, v) (HW_RNG_ER_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_RNG_OR - RNGA Output Register + ******************************************************************************/ + +/*! + * @brief HW_RNG_OR - RNGA Output Register (RO) + * + * Reset value: 0x00000000U + * + * Stores a random-data word generated by RNGA. + */ +typedef union _hw_rng_or +{ + uint32_t U; + struct _hw_rng_or_bitfields + { + uint32_t RANDOUT : 32; /*!< [31:0] Random Output */ + } B; +} hw_rng_or_t; + +/*! + * @name Constants and macros for entire RNG_OR register + */ +/*@{*/ +#define HW_RNG_OR_ADDR(x) ((x) + 0xCU) + +#define HW_RNG_OR(x) (*(__I hw_rng_or_t *) HW_RNG_OR_ADDR(x)) +#define HW_RNG_OR_RD(x) (HW_RNG_OR(x).U) +/*@}*/ + +/* + * Constants & macros for individual RNG_OR bitfields + */ + +/*! + * @name Register RNG_OR, field RANDOUT[31:0] (RO) + * + * Stores a random-data word generated by RNGA. This is a read-only field.Before + * reading RANDOUT, be sure it is valid (SR[OREG_LVL]=1). + * + * Values: + * - 0 - Invalid data (if you read this field when it is 0 and SR[OREG_LVL] is + * 0, RNGA then writes 1 to SR[ERRI], SR[ORU], and SR[LRS]; when the error + * interrupt is not masked (CR[INTM]=0), RNGA also asserts an error interrupt + * request to the interrupt controller). + */ +/*@{*/ +#define BP_RNG_OR_RANDOUT (0U) /*!< Bit position for RNG_OR_RANDOUT. */ +#define BM_RNG_OR_RANDOUT (0xFFFFFFFFU) /*!< Bit mask for RNG_OR_RANDOUT. */ +#define BS_RNG_OR_RANDOUT (32U) /*!< Bit field size in bits for RNG_OR_RANDOUT. */ + +/*! @brief Read current value of the RNG_OR_RANDOUT field. */ +#define BR_RNG_OR_RANDOUT(x) (HW_RNG_OR(x).U) +/*@}*/ + +/******************************************************************************* + * hw_rng_t - module struct + ******************************************************************************/ +/*! + * @brief All RNG module registers. + */ +#pragma pack(1) +typedef struct _hw_rng +{ + __IO hw_rng_cr_t CR; /*!< [0x0] RNGA Control Register */ + __I hw_rng_sr_t SR; /*!< [0x4] RNGA Status Register */ + __O hw_rng_er_t ER; /*!< [0x8] RNGA Entropy Register */ + __I hw_rng_or_t OR; /*!< [0xC] RNGA Output Register */ +} hw_rng_t; +#pragma pack() + +/*! @brief Macro to access all RNG registers. */ +/*! @param x RNG module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_RNG(RNG_BASE)</code>. */ +#define HW_RNG(x) (*(hw_rng_t *)(x)) + +#endif /* __HW_RNG_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rtc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rtc.h new file mode 100644 index 0000000000..4afd6616dc --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_rtc.h @@ -0,0 +1,1659 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_RTC_REGISTERS_H__ +#define __HW_RTC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 RTC + * + * Secure Real Time Clock + * + * Registers defined in this header file: + * - HW_RTC_TSR - RTC Time Seconds Register + * - HW_RTC_TPR - RTC Time Prescaler Register + * - HW_RTC_TAR - RTC Time Alarm Register + * - HW_RTC_TCR - RTC Time Compensation Register + * - HW_RTC_CR - RTC Control Register + * - HW_RTC_SR - RTC Status Register + * - HW_RTC_LR - RTC Lock Register + * - HW_RTC_IER - RTC Interrupt Enable Register + * - HW_RTC_WAR - RTC Write Access Register + * - HW_RTC_RAR - RTC Read Access Register + * + * - hw_rtc_t - Struct containing all module registers. + */ + +#define HW_RTC_INSTANCE_COUNT (1U) /*!< Number of instances of the RTC module. */ + +/******************************************************************************* + * HW_RTC_TSR - RTC Time Seconds Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_TSR - RTC Time Seconds Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_rtc_tsr +{ + uint32_t U; + struct _hw_rtc_tsr_bitfields + { + uint32_t TSR : 32; /*!< [31:0] Time Seconds Register */ + } B; +} hw_rtc_tsr_t; + +/*! + * @name Constants and macros for entire RTC_TSR register + */ +/*@{*/ +#define HW_RTC_TSR_ADDR(x) ((x) + 0x0U) + +#define HW_RTC_TSR(x) (*(__IO hw_rtc_tsr_t *) HW_RTC_TSR_ADDR(x)) +#define HW_RTC_TSR_RD(x) (HW_RTC_TSR(x).U) +#define HW_RTC_TSR_WR(x, v) (HW_RTC_TSR(x).U = (v)) +#define HW_RTC_TSR_SET(x, v) (HW_RTC_TSR_WR(x, HW_RTC_TSR_RD(x) | (v))) +#define HW_RTC_TSR_CLR(x, v) (HW_RTC_TSR_WR(x, HW_RTC_TSR_RD(x) & ~(v))) +#define HW_RTC_TSR_TOG(x, v) (HW_RTC_TSR_WR(x, HW_RTC_TSR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_TSR bitfields + */ + +/*! + * @name Register RTC_TSR, field TSR[31:0] (RW) + * + * When the time counter is enabled, the TSR is read only and increments once a + * second provided SR[TOF] or SR[TIF] are not set. The time counter will read as + * zero when SR[TOF] or SR[TIF] are set. When the time counter is disabled, the + * TSR can be read or written. Writing to the TSR when the time counter is + * disabled will clear the SR[TOF] and/or the SR[TIF]. Writing to TSR with zero is + * supported, but not recommended because TSR will read as zero when SR[TIF] or + * SR[TOF] are set (indicating the time is invalid). + */ +/*@{*/ +#define BP_RTC_TSR_TSR (0U) /*!< Bit position for RTC_TSR_TSR. */ +#define BM_RTC_TSR_TSR (0xFFFFFFFFU) /*!< Bit mask for RTC_TSR_TSR. */ +#define BS_RTC_TSR_TSR (32U) /*!< Bit field size in bits for RTC_TSR_TSR. */ + +/*! @brief Read current value of the RTC_TSR_TSR field. */ +#define BR_RTC_TSR_TSR(x) (HW_RTC_TSR(x).U) + +/*! @brief Format value for bitfield RTC_TSR_TSR. */ +#define BF_RTC_TSR_TSR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_TSR_TSR) & BM_RTC_TSR_TSR) + +/*! @brief Set the TSR field to a new value. */ +#define BW_RTC_TSR_TSR(x, v) (HW_RTC_TSR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_TPR - RTC Time Prescaler Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_TPR - RTC Time Prescaler Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_rtc_tpr +{ + uint32_t U; + struct _hw_rtc_tpr_bitfields + { + uint32_t TPR : 16; /*!< [15:0] Time Prescaler Register */ + uint32_t RESERVED0 : 16; /*!< [31:16] */ + } B; +} hw_rtc_tpr_t; + +/*! + * @name Constants and macros for entire RTC_TPR register + */ +/*@{*/ +#define HW_RTC_TPR_ADDR(x) ((x) + 0x4U) + +#define HW_RTC_TPR(x) (*(__IO hw_rtc_tpr_t *) HW_RTC_TPR_ADDR(x)) +#define HW_RTC_TPR_RD(x) (HW_RTC_TPR(x).U) +#define HW_RTC_TPR_WR(x, v) (HW_RTC_TPR(x).U = (v)) +#define HW_RTC_TPR_SET(x, v) (HW_RTC_TPR_WR(x, HW_RTC_TPR_RD(x) | (v))) +#define HW_RTC_TPR_CLR(x, v) (HW_RTC_TPR_WR(x, HW_RTC_TPR_RD(x) & ~(v))) +#define HW_RTC_TPR_TOG(x, v) (HW_RTC_TPR_WR(x, HW_RTC_TPR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_TPR bitfields + */ + +/*! + * @name Register RTC_TPR, field TPR[15:0] (RW) + * + * When the time counter is enabled, the TPR is read only and increments every + * 32.768 kHz clock cycle. The time counter will read as zero when SR[TOF] or + * SR[TIF] are set. When the time counter is disabled, the TPR can be read or + * written. The TSR[TSR] increments when bit 14 of the TPR transitions from a logic one + * to a logic zero. + */ +/*@{*/ +#define BP_RTC_TPR_TPR (0U) /*!< Bit position for RTC_TPR_TPR. */ +#define BM_RTC_TPR_TPR (0x0000FFFFU) /*!< Bit mask for RTC_TPR_TPR. */ +#define BS_RTC_TPR_TPR (16U) /*!< Bit field size in bits for RTC_TPR_TPR. */ + +/*! @brief Read current value of the RTC_TPR_TPR field. */ +#define BR_RTC_TPR_TPR(x) (HW_RTC_TPR(x).B.TPR) + +/*! @brief Format value for bitfield RTC_TPR_TPR. */ +#define BF_RTC_TPR_TPR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_TPR_TPR) & BM_RTC_TPR_TPR) + +/*! @brief Set the TPR field to a new value. */ +#define BW_RTC_TPR_TPR(x, v) (HW_RTC_TPR_WR(x, (HW_RTC_TPR_RD(x) & ~BM_RTC_TPR_TPR) | BF_RTC_TPR_TPR(v))) +/*@}*/ + +/******************************************************************************* + * HW_RTC_TAR - RTC Time Alarm Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_TAR - RTC Time Alarm Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_rtc_tar +{ + uint32_t U; + struct _hw_rtc_tar_bitfields + { + uint32_t TAR : 32; /*!< [31:0] Time Alarm Register */ + } B; +} hw_rtc_tar_t; + +/*! + * @name Constants and macros for entire RTC_TAR register + */ +/*@{*/ +#define HW_RTC_TAR_ADDR(x) ((x) + 0x8U) + +#define HW_RTC_TAR(x) (*(__IO hw_rtc_tar_t *) HW_RTC_TAR_ADDR(x)) +#define HW_RTC_TAR_RD(x) (HW_RTC_TAR(x).U) +#define HW_RTC_TAR_WR(x, v) (HW_RTC_TAR(x).U = (v)) +#define HW_RTC_TAR_SET(x, v) (HW_RTC_TAR_WR(x, HW_RTC_TAR_RD(x) | (v))) +#define HW_RTC_TAR_CLR(x, v) (HW_RTC_TAR_WR(x, HW_RTC_TAR_RD(x) & ~(v))) +#define HW_RTC_TAR_TOG(x, v) (HW_RTC_TAR_WR(x, HW_RTC_TAR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_TAR bitfields + */ + +/*! + * @name Register RTC_TAR, field TAR[31:0] (RW) + * + * When the time counter is enabled, the SR[TAF] is set whenever the TAR[TAR] + * equals the TSR[TSR] and the TSR[TSR] increments. Writing to the TAR clears the + * SR[TAF]. + */ +/*@{*/ +#define BP_RTC_TAR_TAR (0U) /*!< Bit position for RTC_TAR_TAR. */ +#define BM_RTC_TAR_TAR (0xFFFFFFFFU) /*!< Bit mask for RTC_TAR_TAR. */ +#define BS_RTC_TAR_TAR (32U) /*!< Bit field size in bits for RTC_TAR_TAR. */ + +/*! @brief Read current value of the RTC_TAR_TAR field. */ +#define BR_RTC_TAR_TAR(x) (HW_RTC_TAR(x).U) + +/*! @brief Format value for bitfield RTC_TAR_TAR. */ +#define BF_RTC_TAR_TAR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_TAR_TAR) & BM_RTC_TAR_TAR) + +/*! @brief Set the TAR field to a new value. */ +#define BW_RTC_TAR_TAR(x, v) (HW_RTC_TAR_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_TCR - RTC Time Compensation Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_TCR - RTC Time Compensation Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_rtc_tcr +{ + uint32_t U; + struct _hw_rtc_tcr_bitfields + { + uint32_t TCR : 8; /*!< [7:0] Time Compensation Register */ + uint32_t CIR : 8; /*!< [15:8] Compensation Interval Register */ + uint32_t TCV : 8; /*!< [23:16] Time Compensation Value */ + uint32_t CIC : 8; /*!< [31:24] Compensation Interval Counter */ + } B; +} hw_rtc_tcr_t; + +/*! + * @name Constants and macros for entire RTC_TCR register + */ +/*@{*/ +#define HW_RTC_TCR_ADDR(x) ((x) + 0xCU) + +#define HW_RTC_TCR(x) (*(__IO hw_rtc_tcr_t *) HW_RTC_TCR_ADDR(x)) +#define HW_RTC_TCR_RD(x) (HW_RTC_TCR(x).U) +#define HW_RTC_TCR_WR(x, v) (HW_RTC_TCR(x).U = (v)) +#define HW_RTC_TCR_SET(x, v) (HW_RTC_TCR_WR(x, HW_RTC_TCR_RD(x) | (v))) +#define HW_RTC_TCR_CLR(x, v) (HW_RTC_TCR_WR(x, HW_RTC_TCR_RD(x) & ~(v))) +#define HW_RTC_TCR_TOG(x, v) (HW_RTC_TCR_WR(x, HW_RTC_TCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_TCR bitfields + */ + +/*! + * @name Register RTC_TCR, field TCR[7:0] (RW) + * + * Configures the number of 32.768 kHz clock cycles in each second. This + * register is double buffered and writes do not take affect until the end of the + * current compensation interval. + * + * Values: + * - 10000000 - Time Prescaler Register overflows every 32896 clock cycles. + * - 11111111 - Time Prescaler Register overflows every 32769 clock cycles. + * - 0 - Time Prescaler Register overflows every 32768 clock cycles. + * - 1 - Time Prescaler Register overflows every 32767 clock cycles. + * - 1111111 - Time Prescaler Register overflows every 32641 clock cycles. + */ +/*@{*/ +#define BP_RTC_TCR_TCR (0U) /*!< Bit position for RTC_TCR_TCR. */ +#define BM_RTC_TCR_TCR (0x000000FFU) /*!< Bit mask for RTC_TCR_TCR. */ +#define BS_RTC_TCR_TCR (8U) /*!< Bit field size in bits for RTC_TCR_TCR. */ + +/*! @brief Read current value of the RTC_TCR_TCR field. */ +#define BR_RTC_TCR_TCR(x) (HW_RTC_TCR(x).B.TCR) + +/*! @brief Format value for bitfield RTC_TCR_TCR. */ +#define BF_RTC_TCR_TCR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_TCR_TCR) & BM_RTC_TCR_TCR) + +/*! @brief Set the TCR field to a new value. */ +#define BW_RTC_TCR_TCR(x, v) (HW_RTC_TCR_WR(x, (HW_RTC_TCR_RD(x) & ~BM_RTC_TCR_TCR) | BF_RTC_TCR_TCR(v))) +/*@}*/ + +/*! + * @name Register RTC_TCR, field CIR[15:8] (RW) + * + * Configures the compensation interval in seconds from 1 to 256 to control how + * frequently the TCR should adjust the number of 32.768 kHz cycles in each + * second. The value written should be one less than the number of seconds. For + * example, write zero to configure for a compensation interval of one second. This + * register is double buffered and writes do not take affect until the end of the + * current compensation interval. + */ +/*@{*/ +#define BP_RTC_TCR_CIR (8U) /*!< Bit position for RTC_TCR_CIR. */ +#define BM_RTC_TCR_CIR (0x0000FF00U) /*!< Bit mask for RTC_TCR_CIR. */ +#define BS_RTC_TCR_CIR (8U) /*!< Bit field size in bits for RTC_TCR_CIR. */ + +/*! @brief Read current value of the RTC_TCR_CIR field. */ +#define BR_RTC_TCR_CIR(x) (HW_RTC_TCR(x).B.CIR) + +/*! @brief Format value for bitfield RTC_TCR_CIR. */ +#define BF_RTC_TCR_CIR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_TCR_CIR) & BM_RTC_TCR_CIR) + +/*! @brief Set the CIR field to a new value. */ +#define BW_RTC_TCR_CIR(x, v) (HW_RTC_TCR_WR(x, (HW_RTC_TCR_RD(x) & ~BM_RTC_TCR_CIR) | BF_RTC_TCR_CIR(v))) +/*@}*/ + +/*! + * @name Register RTC_TCR, field TCV[23:16] (RO) + * + * Current value used by the compensation logic for the present second interval. + * Updated once a second if the CIC equals 0 with the contents of the TCR field. + * If the CIC does not equal zero then it is loaded with zero (compensation is + * not enabled for that second increment). + */ +/*@{*/ +#define BP_RTC_TCR_TCV (16U) /*!< Bit position for RTC_TCR_TCV. */ +#define BM_RTC_TCR_TCV (0x00FF0000U) /*!< Bit mask for RTC_TCR_TCV. */ +#define BS_RTC_TCR_TCV (8U) /*!< Bit field size in bits for RTC_TCR_TCV. */ + +/*! @brief Read current value of the RTC_TCR_TCV field. */ +#define BR_RTC_TCR_TCV(x) (HW_RTC_TCR(x).B.TCV) +/*@}*/ + +/*! + * @name Register RTC_TCR, field CIC[31:24] (RO) + * + * Current value of the compensation interval counter. If the compensation + * interval counter equals zero then it is loaded with the contents of the CIR. If the + * CIC does not equal zero then it is decremented once a second. + */ +/*@{*/ +#define BP_RTC_TCR_CIC (24U) /*!< Bit position for RTC_TCR_CIC. */ +#define BM_RTC_TCR_CIC (0xFF000000U) /*!< Bit mask for RTC_TCR_CIC. */ +#define BS_RTC_TCR_CIC (8U) /*!< Bit field size in bits for RTC_TCR_CIC. */ + +/*! @brief Read current value of the RTC_TCR_CIC field. */ +#define BR_RTC_TCR_CIC(x) (HW_RTC_TCR(x).B.CIC) +/*@}*/ + +/******************************************************************************* + * HW_RTC_CR - RTC Control Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_CR - RTC Control Register (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_rtc_cr +{ + uint32_t U; + struct _hw_rtc_cr_bitfields + { + uint32_t SWR : 1; /*!< [0] Software Reset */ + uint32_t WPE : 1; /*!< [1] Wakeup Pin Enable */ + uint32_t SUP : 1; /*!< [2] Supervisor Access */ + uint32_t UM : 1; /*!< [3] Update Mode */ + uint32_t WPS : 1; /*!< [4] Wakeup Pin Select */ + uint32_t RESERVED0 : 3; /*!< [7:5] */ + uint32_t OSCE : 1; /*!< [8] Oscillator Enable */ + uint32_t CLKO : 1; /*!< [9] Clock Output */ + uint32_t SC16P : 1; /*!< [10] Oscillator 16pF Load Configure */ + uint32_t SC8P : 1; /*!< [11] Oscillator 8pF Load Configure */ + uint32_t SC4P : 1; /*!< [12] Oscillator 4pF Load Configure */ + uint32_t SC2P : 1; /*!< [13] Oscillator 2pF Load Configure */ + uint32_t RESERVED1 : 18; /*!< [31:14] */ + } B; +} hw_rtc_cr_t; + +/*! + * @name Constants and macros for entire RTC_CR register + */ +/*@{*/ +#define HW_RTC_CR_ADDR(x) ((x) + 0x10U) + +#define HW_RTC_CR(x) (*(__IO hw_rtc_cr_t *) HW_RTC_CR_ADDR(x)) +#define HW_RTC_CR_RD(x) (HW_RTC_CR(x).U) +#define HW_RTC_CR_WR(x, v) (HW_RTC_CR(x).U = (v)) +#define HW_RTC_CR_SET(x, v) (HW_RTC_CR_WR(x, HW_RTC_CR_RD(x) | (v))) +#define HW_RTC_CR_CLR(x, v) (HW_RTC_CR_WR(x, HW_RTC_CR_RD(x) & ~(v))) +#define HW_RTC_CR_TOG(x, v) (HW_RTC_CR_WR(x, HW_RTC_CR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_CR bitfields + */ + +/*! + * @name Register RTC_CR, field SWR[0] (RW) + * + * Values: + * - 0 - No effect. + * - 1 - Resets all RTC registers except for the SWR bit and the RTC_WAR and + * RTC_RAR registers . The SWR bit is cleared by VBAT POR and by software + * explicitly clearing it. + */ +/*@{*/ +#define BP_RTC_CR_SWR (0U) /*!< Bit position for RTC_CR_SWR. */ +#define BM_RTC_CR_SWR (0x00000001U) /*!< Bit mask for RTC_CR_SWR. */ +#define BS_RTC_CR_SWR (1U) /*!< Bit field size in bits for RTC_CR_SWR. */ + +/*! @brief Read current value of the RTC_CR_SWR field. */ +#define BR_RTC_CR_SWR(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SWR)) + +/*! @brief Format value for bitfield RTC_CR_SWR. */ +#define BF_RTC_CR_SWR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SWR) & BM_RTC_CR_SWR) + +/*! @brief Set the SWR field to a new value. */ +#define BW_RTC_CR_SWR(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SWR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field WPE[1] (RW) + * + * The wakeup pin is optional and not available on all devices. + * + * Values: + * - 0 - Wakeup pin is disabled. + * - 1 - Wakeup pin is enabled and wakeup pin asserts if the RTC interrupt + * asserts or the wakeup pin is turned on. + */ +/*@{*/ +#define BP_RTC_CR_WPE (1U) /*!< Bit position for RTC_CR_WPE. */ +#define BM_RTC_CR_WPE (0x00000002U) /*!< Bit mask for RTC_CR_WPE. */ +#define BS_RTC_CR_WPE (1U) /*!< Bit field size in bits for RTC_CR_WPE. */ + +/*! @brief Read current value of the RTC_CR_WPE field. */ +#define BR_RTC_CR_WPE(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_WPE)) + +/*! @brief Format value for bitfield RTC_CR_WPE. */ +#define BF_RTC_CR_WPE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_WPE) & BM_RTC_CR_WPE) + +/*! @brief Set the WPE field to a new value. */ +#define BW_RTC_CR_WPE(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_WPE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field SUP[2] (RW) + * + * Values: + * - 0 - Non-supervisor mode write accesses are not supported and generate a bus + * error. + * - 1 - Non-supervisor mode write accesses are supported. + */ +/*@{*/ +#define BP_RTC_CR_SUP (2U) /*!< Bit position for RTC_CR_SUP. */ +#define BM_RTC_CR_SUP (0x00000004U) /*!< Bit mask for RTC_CR_SUP. */ +#define BS_RTC_CR_SUP (1U) /*!< Bit field size in bits for RTC_CR_SUP. */ + +/*! @brief Read current value of the RTC_CR_SUP field. */ +#define BR_RTC_CR_SUP(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SUP)) + +/*! @brief Format value for bitfield RTC_CR_SUP. */ +#define BF_RTC_CR_SUP(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SUP) & BM_RTC_CR_SUP) + +/*! @brief Set the SUP field to a new value. */ +#define BW_RTC_CR_SUP(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SUP) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field UM[3] (RW) + * + * Allows SR[TCE] to be written even when the Status Register is locked. When + * set, the SR[TCE] can always be written if the SR[TIF] or SR[TOF] are set or if + * the SR[TCE] is clear. + * + * Values: + * - 0 - Registers cannot be written when locked. + * - 1 - Registers can be written when locked under limited conditions. + */ +/*@{*/ +#define BP_RTC_CR_UM (3U) /*!< Bit position for RTC_CR_UM. */ +#define BM_RTC_CR_UM (0x00000008U) /*!< Bit mask for RTC_CR_UM. */ +#define BS_RTC_CR_UM (1U) /*!< Bit field size in bits for RTC_CR_UM. */ + +/*! @brief Read current value of the RTC_CR_UM field. */ +#define BR_RTC_CR_UM(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_UM)) + +/*! @brief Format value for bitfield RTC_CR_UM. */ +#define BF_RTC_CR_UM(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_UM) & BM_RTC_CR_UM) + +/*! @brief Set the UM field to a new value. */ +#define BW_RTC_CR_UM(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_UM) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field WPS[4] (RW) + * + * The wakeup pin is optional and not available on all devices. + * + * Values: + * - 0 - Wakeup pin asserts (active low, open drain) if the RTC interrupt + * asserts or the wakeup pin is turned on. + * - 1 - Wakeup pin instead outputs the RTC 32kHz clock, provided the wakeup pin + * is turned on and the 32kHz clock is output to other peripherals. + */ +/*@{*/ +#define BP_RTC_CR_WPS (4U) /*!< Bit position for RTC_CR_WPS. */ +#define BM_RTC_CR_WPS (0x00000010U) /*!< Bit mask for RTC_CR_WPS. */ +#define BS_RTC_CR_WPS (1U) /*!< Bit field size in bits for RTC_CR_WPS. */ + +/*! @brief Read current value of the RTC_CR_WPS field. */ +#define BR_RTC_CR_WPS(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_WPS)) + +/*! @brief Format value for bitfield RTC_CR_WPS. */ +#define BF_RTC_CR_WPS(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_WPS) & BM_RTC_CR_WPS) + +/*! @brief Set the WPS field to a new value. */ +#define BW_RTC_CR_WPS(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_WPS) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field OSCE[8] (RW) + * + * Values: + * - 0 - 32.768 kHz oscillator is disabled. + * - 1 - 32.768 kHz oscillator is enabled. After setting this bit, wait the + * oscillator startup time before enabling the time counter to allow the 32.768 + * kHz clock time to stabilize. + */ +/*@{*/ +#define BP_RTC_CR_OSCE (8U) /*!< Bit position for RTC_CR_OSCE. */ +#define BM_RTC_CR_OSCE (0x00000100U) /*!< Bit mask for RTC_CR_OSCE. */ +#define BS_RTC_CR_OSCE (1U) /*!< Bit field size in bits for RTC_CR_OSCE. */ + +/*! @brief Read current value of the RTC_CR_OSCE field. */ +#define BR_RTC_CR_OSCE(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_OSCE)) + +/*! @brief Format value for bitfield RTC_CR_OSCE. */ +#define BF_RTC_CR_OSCE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_OSCE) & BM_RTC_CR_OSCE) + +/*! @brief Set the OSCE field to a new value. */ +#define BW_RTC_CR_OSCE(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_OSCE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field CLKO[9] (RW) + * + * Values: + * - 0 - The 32 kHz clock is output to other peripherals. + * - 1 - The 32 kHz clock is not output to other peripherals. + */ +/*@{*/ +#define BP_RTC_CR_CLKO (9U) /*!< Bit position for RTC_CR_CLKO. */ +#define BM_RTC_CR_CLKO (0x00000200U) /*!< Bit mask for RTC_CR_CLKO. */ +#define BS_RTC_CR_CLKO (1U) /*!< Bit field size in bits for RTC_CR_CLKO. */ + +/*! @brief Read current value of the RTC_CR_CLKO field. */ +#define BR_RTC_CR_CLKO(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_CLKO)) + +/*! @brief Format value for bitfield RTC_CR_CLKO. */ +#define BF_RTC_CR_CLKO(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_CLKO) & BM_RTC_CR_CLKO) + +/*! @brief Set the CLKO field to a new value. */ +#define BW_RTC_CR_CLKO(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_CLKO) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field SC16P[10] (RW) + * + * Values: + * - 0 - Disable the load. + * - 1 - Enable the additional load. + */ +/*@{*/ +#define BP_RTC_CR_SC16P (10U) /*!< Bit position for RTC_CR_SC16P. */ +#define BM_RTC_CR_SC16P (0x00000400U) /*!< Bit mask for RTC_CR_SC16P. */ +#define BS_RTC_CR_SC16P (1U) /*!< Bit field size in bits for RTC_CR_SC16P. */ + +/*! @brief Read current value of the RTC_CR_SC16P field. */ +#define BR_RTC_CR_SC16P(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC16P)) + +/*! @brief Format value for bitfield RTC_CR_SC16P. */ +#define BF_RTC_CR_SC16P(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SC16P) & BM_RTC_CR_SC16P) + +/*! @brief Set the SC16P field to a new value. */ +#define BW_RTC_CR_SC16P(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC16P) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field SC8P[11] (RW) + * + * Values: + * - 0 - Disable the load. + * - 1 - Enable the additional load. + */ +/*@{*/ +#define BP_RTC_CR_SC8P (11U) /*!< Bit position for RTC_CR_SC8P. */ +#define BM_RTC_CR_SC8P (0x00000800U) /*!< Bit mask for RTC_CR_SC8P. */ +#define BS_RTC_CR_SC8P (1U) /*!< Bit field size in bits for RTC_CR_SC8P. */ + +/*! @brief Read current value of the RTC_CR_SC8P field. */ +#define BR_RTC_CR_SC8P(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC8P)) + +/*! @brief Format value for bitfield RTC_CR_SC8P. */ +#define BF_RTC_CR_SC8P(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SC8P) & BM_RTC_CR_SC8P) + +/*! @brief Set the SC8P field to a new value. */ +#define BW_RTC_CR_SC8P(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC8P) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field SC4P[12] (RW) + * + * Values: + * - 0 - Disable the load. + * - 1 - Enable the additional load. + */ +/*@{*/ +#define BP_RTC_CR_SC4P (12U) /*!< Bit position for RTC_CR_SC4P. */ +#define BM_RTC_CR_SC4P (0x00001000U) /*!< Bit mask for RTC_CR_SC4P. */ +#define BS_RTC_CR_SC4P (1U) /*!< Bit field size in bits for RTC_CR_SC4P. */ + +/*! @brief Read current value of the RTC_CR_SC4P field. */ +#define BR_RTC_CR_SC4P(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC4P)) + +/*! @brief Format value for bitfield RTC_CR_SC4P. */ +#define BF_RTC_CR_SC4P(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SC4P) & BM_RTC_CR_SC4P) + +/*! @brief Set the SC4P field to a new value. */ +#define BW_RTC_CR_SC4P(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC4P) = (v)) +/*@}*/ + +/*! + * @name Register RTC_CR, field SC2P[13] (RW) + * + * Values: + * - 0 - Disable the load. + * - 1 - Enable the additional load. + */ +/*@{*/ +#define BP_RTC_CR_SC2P (13U) /*!< Bit position for RTC_CR_SC2P. */ +#define BM_RTC_CR_SC2P (0x00002000U) /*!< Bit mask for RTC_CR_SC2P. */ +#define BS_RTC_CR_SC2P (1U) /*!< Bit field size in bits for RTC_CR_SC2P. */ + +/*! @brief Read current value of the RTC_CR_SC2P field. */ +#define BR_RTC_CR_SC2P(x) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC2P)) + +/*! @brief Format value for bitfield RTC_CR_SC2P. */ +#define BF_RTC_CR_SC2P(v) ((uint32_t)((uint32_t)(v) << BP_RTC_CR_SC2P) & BM_RTC_CR_SC2P) + +/*! @brief Set the SC2P field to a new value. */ +#define BW_RTC_CR_SC2P(x, v) (BITBAND_ACCESS32(HW_RTC_CR_ADDR(x), BP_RTC_CR_SC2P) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_SR - RTC Status Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_SR - RTC Status Register (RW) + * + * Reset value: 0x00000001U + */ +typedef union _hw_rtc_sr +{ + uint32_t U; + struct _hw_rtc_sr_bitfields + { + uint32_t TIF : 1; /*!< [0] Time Invalid Flag */ + uint32_t TOF : 1; /*!< [1] Time Overflow Flag */ + uint32_t TAF : 1; /*!< [2] Time Alarm Flag */ + uint32_t RESERVED0 : 1; /*!< [3] */ + uint32_t TCE : 1; /*!< [4] Time Counter Enable */ + uint32_t RESERVED1 : 27; /*!< [31:5] */ + } B; +} hw_rtc_sr_t; + +/*! + * @name Constants and macros for entire RTC_SR register + */ +/*@{*/ +#define HW_RTC_SR_ADDR(x) ((x) + 0x14U) + +#define HW_RTC_SR(x) (*(__IO hw_rtc_sr_t *) HW_RTC_SR_ADDR(x)) +#define HW_RTC_SR_RD(x) (HW_RTC_SR(x).U) +#define HW_RTC_SR_WR(x, v) (HW_RTC_SR(x).U = (v)) +#define HW_RTC_SR_SET(x, v) (HW_RTC_SR_WR(x, HW_RTC_SR_RD(x) | (v))) +#define HW_RTC_SR_CLR(x, v) (HW_RTC_SR_WR(x, HW_RTC_SR_RD(x) & ~(v))) +#define HW_RTC_SR_TOG(x, v) (HW_RTC_SR_WR(x, HW_RTC_SR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_SR bitfields + */ + +/*! + * @name Register RTC_SR, field TIF[0] (RO) + * + * The time invalid flag is set on VBAT POR or software reset. The TSR and TPR + * do not increment and read as zero when this bit is set. This bit is cleared by + * writing the TSR register when the time counter is disabled. + * + * Values: + * - 0 - Time is valid. + * - 1 - Time is invalid and time counter is read as zero. + */ +/*@{*/ +#define BP_RTC_SR_TIF (0U) /*!< Bit position for RTC_SR_TIF. */ +#define BM_RTC_SR_TIF (0x00000001U) /*!< Bit mask for RTC_SR_TIF. */ +#define BS_RTC_SR_TIF (1U) /*!< Bit field size in bits for RTC_SR_TIF. */ + +/*! @brief Read current value of the RTC_SR_TIF field. */ +#define BR_RTC_SR_TIF(x) (BITBAND_ACCESS32(HW_RTC_SR_ADDR(x), BP_RTC_SR_TIF)) +/*@}*/ + +/*! + * @name Register RTC_SR, field TOF[1] (RO) + * + * Time overflow flag is set when the time counter is enabled and overflows. The + * TSR and TPR do not increment and read as zero when this bit is set. This bit + * is cleared by writing the TSR register when the time counter is disabled. + * + * Values: + * - 0 - Time overflow has not occurred. + * - 1 - Time overflow has occurred and time counter is read as zero. + */ +/*@{*/ +#define BP_RTC_SR_TOF (1U) /*!< Bit position for RTC_SR_TOF. */ +#define BM_RTC_SR_TOF (0x00000002U) /*!< Bit mask for RTC_SR_TOF. */ +#define BS_RTC_SR_TOF (1U) /*!< Bit field size in bits for RTC_SR_TOF. */ + +/*! @brief Read current value of the RTC_SR_TOF field. */ +#define BR_RTC_SR_TOF(x) (BITBAND_ACCESS32(HW_RTC_SR_ADDR(x), BP_RTC_SR_TOF)) +/*@}*/ + +/*! + * @name Register RTC_SR, field TAF[2] (RO) + * + * Time alarm flag is set when the TAR[TAR] equals the TSR[TSR] and the TSR[TSR] + * increments. This bit is cleared by writing the TAR register. + * + * Values: + * - 0 - Time alarm has not occurred. + * - 1 - Time alarm has occurred. + */ +/*@{*/ +#define BP_RTC_SR_TAF (2U) /*!< Bit position for RTC_SR_TAF. */ +#define BM_RTC_SR_TAF (0x00000004U) /*!< Bit mask for RTC_SR_TAF. */ +#define BS_RTC_SR_TAF (1U) /*!< Bit field size in bits for RTC_SR_TAF. */ + +/*! @brief Read current value of the RTC_SR_TAF field. */ +#define BR_RTC_SR_TAF(x) (BITBAND_ACCESS32(HW_RTC_SR_ADDR(x), BP_RTC_SR_TAF)) +/*@}*/ + +/*! + * @name Register RTC_SR, field TCE[4] (RW) + * + * When time counter is disabled the TSR register and TPR register are + * writeable, but do not increment. When time counter is enabled the TSR register and TPR + * register are not writeable, but increment. + * + * Values: + * - 0 - Time counter is disabled. + * - 1 - Time counter is enabled. + */ +/*@{*/ +#define BP_RTC_SR_TCE (4U) /*!< Bit position for RTC_SR_TCE. */ +#define BM_RTC_SR_TCE (0x00000010U) /*!< Bit mask for RTC_SR_TCE. */ +#define BS_RTC_SR_TCE (1U) /*!< Bit field size in bits for RTC_SR_TCE. */ + +/*! @brief Read current value of the RTC_SR_TCE field. */ +#define BR_RTC_SR_TCE(x) (BITBAND_ACCESS32(HW_RTC_SR_ADDR(x), BP_RTC_SR_TCE)) + +/*! @brief Format value for bitfield RTC_SR_TCE. */ +#define BF_RTC_SR_TCE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_SR_TCE) & BM_RTC_SR_TCE) + +/*! @brief Set the TCE field to a new value. */ +#define BW_RTC_SR_TCE(x, v) (BITBAND_ACCESS32(HW_RTC_SR_ADDR(x), BP_RTC_SR_TCE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_LR - RTC Lock Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_LR - RTC Lock Register (RW) + * + * Reset value: 0x000000FFU + */ +typedef union _hw_rtc_lr +{ + uint32_t U; + struct _hw_rtc_lr_bitfields + { + uint32_t RESERVED0 : 3; /*!< [2:0] */ + uint32_t TCL : 1; /*!< [3] Time Compensation Lock */ + uint32_t CRL : 1; /*!< [4] Control Register Lock */ + uint32_t SRL : 1; /*!< [5] Status Register Lock */ + uint32_t LRL : 1; /*!< [6] Lock Register Lock */ + uint32_t RESERVED1 : 25; /*!< [31:7] */ + } B; +} hw_rtc_lr_t; + +/*! + * @name Constants and macros for entire RTC_LR register + */ +/*@{*/ +#define HW_RTC_LR_ADDR(x) ((x) + 0x18U) + +#define HW_RTC_LR(x) (*(__IO hw_rtc_lr_t *) HW_RTC_LR_ADDR(x)) +#define HW_RTC_LR_RD(x) (HW_RTC_LR(x).U) +#define HW_RTC_LR_WR(x, v) (HW_RTC_LR(x).U = (v)) +#define HW_RTC_LR_SET(x, v) (HW_RTC_LR_WR(x, HW_RTC_LR_RD(x) | (v))) +#define HW_RTC_LR_CLR(x, v) (HW_RTC_LR_WR(x, HW_RTC_LR_RD(x) & ~(v))) +#define HW_RTC_LR_TOG(x, v) (HW_RTC_LR_WR(x, HW_RTC_LR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_LR bitfields + */ + +/*! + * @name Register RTC_LR, field TCL[3] (RW) + * + * After being cleared, this bit can be set only by VBAT POR or software reset. + * + * Values: + * - 0 - Time Compensation Register is locked and writes are ignored. + * - 1 - Time Compensation Register is not locked and writes complete as normal. + */ +/*@{*/ +#define BP_RTC_LR_TCL (3U) /*!< Bit position for RTC_LR_TCL. */ +#define BM_RTC_LR_TCL (0x00000008U) /*!< Bit mask for RTC_LR_TCL. */ +#define BS_RTC_LR_TCL (1U) /*!< Bit field size in bits for RTC_LR_TCL. */ + +/*! @brief Read current value of the RTC_LR_TCL field. */ +#define BR_RTC_LR_TCL(x) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_TCL)) + +/*! @brief Format value for bitfield RTC_LR_TCL. */ +#define BF_RTC_LR_TCL(v) ((uint32_t)((uint32_t)(v) << BP_RTC_LR_TCL) & BM_RTC_LR_TCL) + +/*! @brief Set the TCL field to a new value. */ +#define BW_RTC_LR_TCL(x, v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_TCL) = (v)) +/*@}*/ + +/*! + * @name Register RTC_LR, field CRL[4] (RW) + * + * After being cleared, this bit can only be set by VBAT POR. + * + * Values: + * - 0 - Control Register is locked and writes are ignored. + * - 1 - Control Register is not locked and writes complete as normal. + */ +/*@{*/ +#define BP_RTC_LR_CRL (4U) /*!< Bit position for RTC_LR_CRL. */ +#define BM_RTC_LR_CRL (0x00000010U) /*!< Bit mask for RTC_LR_CRL. */ +#define BS_RTC_LR_CRL (1U) /*!< Bit field size in bits for RTC_LR_CRL. */ + +/*! @brief Read current value of the RTC_LR_CRL field. */ +#define BR_RTC_LR_CRL(x) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_CRL)) + +/*! @brief Format value for bitfield RTC_LR_CRL. */ +#define BF_RTC_LR_CRL(v) ((uint32_t)((uint32_t)(v) << BP_RTC_LR_CRL) & BM_RTC_LR_CRL) + +/*! @brief Set the CRL field to a new value. */ +#define BW_RTC_LR_CRL(x, v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_CRL) = (v)) +/*@}*/ + +/*! + * @name Register RTC_LR, field SRL[5] (RW) + * + * After being cleared, this bit can be set only by VBAT POR or software reset. + * + * Values: + * - 0 - Status Register is locked and writes are ignored. + * - 1 - Status Register is not locked and writes complete as normal. + */ +/*@{*/ +#define BP_RTC_LR_SRL (5U) /*!< Bit position for RTC_LR_SRL. */ +#define BM_RTC_LR_SRL (0x00000020U) /*!< Bit mask for RTC_LR_SRL. */ +#define BS_RTC_LR_SRL (1U) /*!< Bit field size in bits for RTC_LR_SRL. */ + +/*! @brief Read current value of the RTC_LR_SRL field. */ +#define BR_RTC_LR_SRL(x) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_SRL)) + +/*! @brief Format value for bitfield RTC_LR_SRL. */ +#define BF_RTC_LR_SRL(v) ((uint32_t)((uint32_t)(v) << BP_RTC_LR_SRL) & BM_RTC_LR_SRL) + +/*! @brief Set the SRL field to a new value. */ +#define BW_RTC_LR_SRL(x, v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_SRL) = (v)) +/*@}*/ + +/*! + * @name Register RTC_LR, field LRL[6] (RW) + * + * After being cleared, this bit can be set only by VBAT POR or software reset. + * + * Values: + * - 0 - Lock Register is locked and writes are ignored. + * - 1 - Lock Register is not locked and writes complete as normal. + */ +/*@{*/ +#define BP_RTC_LR_LRL (6U) /*!< Bit position for RTC_LR_LRL. */ +#define BM_RTC_LR_LRL (0x00000040U) /*!< Bit mask for RTC_LR_LRL. */ +#define BS_RTC_LR_LRL (1U) /*!< Bit field size in bits for RTC_LR_LRL. */ + +/*! @brief Read current value of the RTC_LR_LRL field. */ +#define BR_RTC_LR_LRL(x) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_LRL)) + +/*! @brief Format value for bitfield RTC_LR_LRL. */ +#define BF_RTC_LR_LRL(v) ((uint32_t)((uint32_t)(v) << BP_RTC_LR_LRL) & BM_RTC_LR_LRL) + +/*! @brief Set the LRL field to a new value. */ +#define BW_RTC_LR_LRL(x, v) (BITBAND_ACCESS32(HW_RTC_LR_ADDR(x), BP_RTC_LR_LRL) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_IER - RTC Interrupt Enable Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_IER - RTC Interrupt Enable Register (RW) + * + * Reset value: 0x00000007U + */ +typedef union _hw_rtc_ier +{ + uint32_t U; + struct _hw_rtc_ier_bitfields + { + uint32_t TIIE : 1; /*!< [0] Time Invalid Interrupt Enable */ + uint32_t TOIE : 1; /*!< [1] Time Overflow Interrupt Enable */ + uint32_t TAIE : 1; /*!< [2] Time Alarm Interrupt Enable */ + uint32_t RESERVED0 : 1; /*!< [3] */ + uint32_t TSIE : 1; /*!< [4] Time Seconds Interrupt Enable */ + uint32_t RESERVED1 : 2; /*!< [6:5] */ + uint32_t WPON : 1; /*!< [7] Wakeup Pin On */ + uint32_t RESERVED2 : 24; /*!< [31:8] */ + } B; +} hw_rtc_ier_t; + +/*! + * @name Constants and macros for entire RTC_IER register + */ +/*@{*/ +#define HW_RTC_IER_ADDR(x) ((x) + 0x1CU) + +#define HW_RTC_IER(x) (*(__IO hw_rtc_ier_t *) HW_RTC_IER_ADDR(x)) +#define HW_RTC_IER_RD(x) (HW_RTC_IER(x).U) +#define HW_RTC_IER_WR(x, v) (HW_RTC_IER(x).U = (v)) +#define HW_RTC_IER_SET(x, v) (HW_RTC_IER_WR(x, HW_RTC_IER_RD(x) | (v))) +#define HW_RTC_IER_CLR(x, v) (HW_RTC_IER_WR(x, HW_RTC_IER_RD(x) & ~(v))) +#define HW_RTC_IER_TOG(x, v) (HW_RTC_IER_WR(x, HW_RTC_IER_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_IER bitfields + */ + +/*! + * @name Register RTC_IER, field TIIE[0] (RW) + * + * Values: + * - 0 - Time invalid flag does not generate an interrupt. + * - 1 - Time invalid flag does generate an interrupt. + */ +/*@{*/ +#define BP_RTC_IER_TIIE (0U) /*!< Bit position for RTC_IER_TIIE. */ +#define BM_RTC_IER_TIIE (0x00000001U) /*!< Bit mask for RTC_IER_TIIE. */ +#define BS_RTC_IER_TIIE (1U) /*!< Bit field size in bits for RTC_IER_TIIE. */ + +/*! @brief Read current value of the RTC_IER_TIIE field. */ +#define BR_RTC_IER_TIIE(x) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TIIE)) + +/*! @brief Format value for bitfield RTC_IER_TIIE. */ +#define BF_RTC_IER_TIIE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_IER_TIIE) & BM_RTC_IER_TIIE) + +/*! @brief Set the TIIE field to a new value. */ +#define BW_RTC_IER_TIIE(x, v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TIIE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_IER, field TOIE[1] (RW) + * + * Values: + * - 0 - Time overflow flag does not generate an interrupt. + * - 1 - Time overflow flag does generate an interrupt. + */ +/*@{*/ +#define BP_RTC_IER_TOIE (1U) /*!< Bit position for RTC_IER_TOIE. */ +#define BM_RTC_IER_TOIE (0x00000002U) /*!< Bit mask for RTC_IER_TOIE. */ +#define BS_RTC_IER_TOIE (1U) /*!< Bit field size in bits for RTC_IER_TOIE. */ + +/*! @brief Read current value of the RTC_IER_TOIE field. */ +#define BR_RTC_IER_TOIE(x) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TOIE)) + +/*! @brief Format value for bitfield RTC_IER_TOIE. */ +#define BF_RTC_IER_TOIE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_IER_TOIE) & BM_RTC_IER_TOIE) + +/*! @brief Set the TOIE field to a new value. */ +#define BW_RTC_IER_TOIE(x, v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TOIE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_IER, field TAIE[2] (RW) + * + * Values: + * - 0 - Time alarm flag does not generate an interrupt. + * - 1 - Time alarm flag does generate an interrupt. + */ +/*@{*/ +#define BP_RTC_IER_TAIE (2U) /*!< Bit position for RTC_IER_TAIE. */ +#define BM_RTC_IER_TAIE (0x00000004U) /*!< Bit mask for RTC_IER_TAIE. */ +#define BS_RTC_IER_TAIE (1U) /*!< Bit field size in bits for RTC_IER_TAIE. */ + +/*! @brief Read current value of the RTC_IER_TAIE field. */ +#define BR_RTC_IER_TAIE(x) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TAIE)) + +/*! @brief Format value for bitfield RTC_IER_TAIE. */ +#define BF_RTC_IER_TAIE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_IER_TAIE) & BM_RTC_IER_TAIE) + +/*! @brief Set the TAIE field to a new value. */ +#define BW_RTC_IER_TAIE(x, v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TAIE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_IER, field TSIE[4] (RW) + * + * The seconds interrupt is an edge-sensitive interrupt with a dedicated + * interrupt vector. It is generated once a second and requires no software overhead + * (there is no corresponding status flag to clear). + * + * Values: + * - 0 - Seconds interrupt is disabled. + * - 1 - Seconds interrupt is enabled. + */ +/*@{*/ +#define BP_RTC_IER_TSIE (4U) /*!< Bit position for RTC_IER_TSIE. */ +#define BM_RTC_IER_TSIE (0x00000010U) /*!< Bit mask for RTC_IER_TSIE. */ +#define BS_RTC_IER_TSIE (1U) /*!< Bit field size in bits for RTC_IER_TSIE. */ + +/*! @brief Read current value of the RTC_IER_TSIE field. */ +#define BR_RTC_IER_TSIE(x) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TSIE)) + +/*! @brief Format value for bitfield RTC_IER_TSIE. */ +#define BF_RTC_IER_TSIE(v) ((uint32_t)((uint32_t)(v) << BP_RTC_IER_TSIE) & BM_RTC_IER_TSIE) + +/*! @brief Set the TSIE field to a new value. */ +#define BW_RTC_IER_TSIE(x, v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_TSIE) = (v)) +/*@}*/ + +/*! + * @name Register RTC_IER, field WPON[7] (RW) + * + * The wakeup pin is optional and not available on all devices. Whenever the + * wakeup pin is enabled and this bit is set, the wakeup pin will assert. + * + * Values: + * - 0 - No effect. + * - 1 - If the wakeup pin is enabled, then the wakeup pin will assert. + */ +/*@{*/ +#define BP_RTC_IER_WPON (7U) /*!< Bit position for RTC_IER_WPON. */ +#define BM_RTC_IER_WPON (0x00000080U) /*!< Bit mask for RTC_IER_WPON. */ +#define BS_RTC_IER_WPON (1U) /*!< Bit field size in bits for RTC_IER_WPON. */ + +/*! @brief Read current value of the RTC_IER_WPON field. */ +#define BR_RTC_IER_WPON(x) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_WPON)) + +/*! @brief Format value for bitfield RTC_IER_WPON. */ +#define BF_RTC_IER_WPON(v) ((uint32_t)((uint32_t)(v) << BP_RTC_IER_WPON) & BM_RTC_IER_WPON) + +/*! @brief Set the WPON field to a new value. */ +#define BW_RTC_IER_WPON(x, v) (BITBAND_ACCESS32(HW_RTC_IER_ADDR(x), BP_RTC_IER_WPON) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_WAR - RTC Write Access Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_WAR - RTC Write Access Register (RW) + * + * Reset value: 0x000000FFU + */ +typedef union _hw_rtc_war +{ + uint32_t U; + struct _hw_rtc_war_bitfields + { + uint32_t TSRW : 1; /*!< [0] Time Seconds Register Write */ + uint32_t TPRW : 1; /*!< [1] Time Prescaler Register Write */ + uint32_t TARW : 1; /*!< [2] Time Alarm Register Write */ + uint32_t TCRW : 1; /*!< [3] Time Compensation Register Write */ + uint32_t CRW : 1; /*!< [4] Control Register Write */ + uint32_t SRW : 1; /*!< [5] Status Register Write */ + uint32_t LRW : 1; /*!< [6] Lock Register Write */ + uint32_t IERW : 1; /*!< [7] Interrupt Enable Register Write */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_rtc_war_t; + +/*! + * @name Constants and macros for entire RTC_WAR register + */ +/*@{*/ +#define HW_RTC_WAR_ADDR(x) ((x) + 0x800U) + +#define HW_RTC_WAR(x) (*(__IO hw_rtc_war_t *) HW_RTC_WAR_ADDR(x)) +#define HW_RTC_WAR_RD(x) (HW_RTC_WAR(x).U) +#define HW_RTC_WAR_WR(x, v) (HW_RTC_WAR(x).U = (v)) +#define HW_RTC_WAR_SET(x, v) (HW_RTC_WAR_WR(x, HW_RTC_WAR_RD(x) | (v))) +#define HW_RTC_WAR_CLR(x, v) (HW_RTC_WAR_WR(x, HW_RTC_WAR_RD(x) & ~(v))) +#define HW_RTC_WAR_TOG(x, v) (HW_RTC_WAR_WR(x, HW_RTC_WAR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_WAR bitfields + */ + +/*! + * @name Register RTC_WAR, field TSRW[0] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Time Seconds Register are ignored. + * - 1 - Writes to the Time Seconds Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_TSRW (0U) /*!< Bit position for RTC_WAR_TSRW. */ +#define BM_RTC_WAR_TSRW (0x00000001U) /*!< Bit mask for RTC_WAR_TSRW. */ +#define BS_RTC_WAR_TSRW (1U) /*!< Bit field size in bits for RTC_WAR_TSRW. */ + +/*! @brief Read current value of the RTC_WAR_TSRW field. */ +#define BR_RTC_WAR_TSRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TSRW)) + +/*! @brief Format value for bitfield RTC_WAR_TSRW. */ +#define BF_RTC_WAR_TSRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_TSRW) & BM_RTC_WAR_TSRW) + +/*! @brief Set the TSRW field to a new value. */ +#define BW_RTC_WAR_TSRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TSRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field TPRW[1] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Time Prescaler Register are ignored. + * - 1 - Writes to the Time Prescaler Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_TPRW (1U) /*!< Bit position for RTC_WAR_TPRW. */ +#define BM_RTC_WAR_TPRW (0x00000002U) /*!< Bit mask for RTC_WAR_TPRW. */ +#define BS_RTC_WAR_TPRW (1U) /*!< Bit field size in bits for RTC_WAR_TPRW. */ + +/*! @brief Read current value of the RTC_WAR_TPRW field. */ +#define BR_RTC_WAR_TPRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TPRW)) + +/*! @brief Format value for bitfield RTC_WAR_TPRW. */ +#define BF_RTC_WAR_TPRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_TPRW) & BM_RTC_WAR_TPRW) + +/*! @brief Set the TPRW field to a new value. */ +#define BW_RTC_WAR_TPRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TPRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field TARW[2] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Time Alarm Register are ignored. + * - 1 - Writes to the Time Alarm Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_TARW (2U) /*!< Bit position for RTC_WAR_TARW. */ +#define BM_RTC_WAR_TARW (0x00000004U) /*!< Bit mask for RTC_WAR_TARW. */ +#define BS_RTC_WAR_TARW (1U) /*!< Bit field size in bits for RTC_WAR_TARW. */ + +/*! @brief Read current value of the RTC_WAR_TARW field. */ +#define BR_RTC_WAR_TARW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TARW)) + +/*! @brief Format value for bitfield RTC_WAR_TARW. */ +#define BF_RTC_WAR_TARW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_TARW) & BM_RTC_WAR_TARW) + +/*! @brief Set the TARW field to a new value. */ +#define BW_RTC_WAR_TARW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TARW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field TCRW[3] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Time Compensation Register are ignored. + * - 1 - Writes to the Time Compensation Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_TCRW (3U) /*!< Bit position for RTC_WAR_TCRW. */ +#define BM_RTC_WAR_TCRW (0x00000008U) /*!< Bit mask for RTC_WAR_TCRW. */ +#define BS_RTC_WAR_TCRW (1U) /*!< Bit field size in bits for RTC_WAR_TCRW. */ + +/*! @brief Read current value of the RTC_WAR_TCRW field. */ +#define BR_RTC_WAR_TCRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TCRW)) + +/*! @brief Format value for bitfield RTC_WAR_TCRW. */ +#define BF_RTC_WAR_TCRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_TCRW) & BM_RTC_WAR_TCRW) + +/*! @brief Set the TCRW field to a new value. */ +#define BW_RTC_WAR_TCRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_TCRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field CRW[4] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Control Register are ignored. + * - 1 - Writes to the Control Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_CRW (4U) /*!< Bit position for RTC_WAR_CRW. */ +#define BM_RTC_WAR_CRW (0x00000010U) /*!< Bit mask for RTC_WAR_CRW. */ +#define BS_RTC_WAR_CRW (1U) /*!< Bit field size in bits for RTC_WAR_CRW. */ + +/*! @brief Read current value of the RTC_WAR_CRW field. */ +#define BR_RTC_WAR_CRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_CRW)) + +/*! @brief Format value for bitfield RTC_WAR_CRW. */ +#define BF_RTC_WAR_CRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_CRW) & BM_RTC_WAR_CRW) + +/*! @brief Set the CRW field to a new value. */ +#define BW_RTC_WAR_CRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_CRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field SRW[5] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Status Register are ignored. + * - 1 - Writes to the Status Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_SRW (5U) /*!< Bit position for RTC_WAR_SRW. */ +#define BM_RTC_WAR_SRW (0x00000020U) /*!< Bit mask for RTC_WAR_SRW. */ +#define BS_RTC_WAR_SRW (1U) /*!< Bit field size in bits for RTC_WAR_SRW. */ + +/*! @brief Read current value of the RTC_WAR_SRW field. */ +#define BR_RTC_WAR_SRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_SRW)) + +/*! @brief Format value for bitfield RTC_WAR_SRW. */ +#define BF_RTC_WAR_SRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_SRW) & BM_RTC_WAR_SRW) + +/*! @brief Set the SRW field to a new value. */ +#define BW_RTC_WAR_SRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_SRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field LRW[6] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Lock Register are ignored. + * - 1 - Writes to the Lock Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_LRW (6U) /*!< Bit position for RTC_WAR_LRW. */ +#define BM_RTC_WAR_LRW (0x00000040U) /*!< Bit mask for RTC_WAR_LRW. */ +#define BS_RTC_WAR_LRW (1U) /*!< Bit field size in bits for RTC_WAR_LRW. */ + +/*! @brief Read current value of the RTC_WAR_LRW field. */ +#define BR_RTC_WAR_LRW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_LRW)) + +/*! @brief Format value for bitfield RTC_WAR_LRW. */ +#define BF_RTC_WAR_LRW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_LRW) & BM_RTC_WAR_LRW) + +/*! @brief Set the LRW field to a new value. */ +#define BW_RTC_WAR_LRW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_LRW) = (v)) +/*@}*/ + +/*! + * @name Register RTC_WAR, field IERW[7] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Writes to the Interupt Enable Register are ignored. + * - 1 - Writes to the Interrupt Enable Register complete as normal. + */ +/*@{*/ +#define BP_RTC_WAR_IERW (7U) /*!< Bit position for RTC_WAR_IERW. */ +#define BM_RTC_WAR_IERW (0x00000080U) /*!< Bit mask for RTC_WAR_IERW. */ +#define BS_RTC_WAR_IERW (1U) /*!< Bit field size in bits for RTC_WAR_IERW. */ + +/*! @brief Read current value of the RTC_WAR_IERW field. */ +#define BR_RTC_WAR_IERW(x) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_IERW)) + +/*! @brief Format value for bitfield RTC_WAR_IERW. */ +#define BF_RTC_WAR_IERW(v) ((uint32_t)((uint32_t)(v) << BP_RTC_WAR_IERW) & BM_RTC_WAR_IERW) + +/*! @brief Set the IERW field to a new value. */ +#define BW_RTC_WAR_IERW(x, v) (BITBAND_ACCESS32(HW_RTC_WAR_ADDR(x), BP_RTC_WAR_IERW) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_RTC_RAR - RTC Read Access Register + ******************************************************************************/ + +/*! + * @brief HW_RTC_RAR - RTC Read Access Register (RW) + * + * Reset value: 0x000000FFU + */ +typedef union _hw_rtc_rar +{ + uint32_t U; + struct _hw_rtc_rar_bitfields + { + uint32_t TSRR : 1; /*!< [0] Time Seconds Register Read */ + uint32_t TPRR : 1; /*!< [1] Time Prescaler Register Read */ + uint32_t TARR : 1; /*!< [2] Time Alarm Register Read */ + uint32_t TCRR : 1; /*!< [3] Time Compensation Register Read */ + uint32_t CRR : 1; /*!< [4] Control Register Read */ + uint32_t SRR : 1; /*!< [5] Status Register Read */ + uint32_t LRR : 1; /*!< [6] Lock Register Read */ + uint32_t IERR : 1; /*!< [7] Interrupt Enable Register Read */ + uint32_t RESERVED0 : 24; /*!< [31:8] */ + } B; +} hw_rtc_rar_t; + +/*! + * @name Constants and macros for entire RTC_RAR register + */ +/*@{*/ +#define HW_RTC_RAR_ADDR(x) ((x) + 0x804U) + +#define HW_RTC_RAR(x) (*(__IO hw_rtc_rar_t *) HW_RTC_RAR_ADDR(x)) +#define HW_RTC_RAR_RD(x) (HW_RTC_RAR(x).U) +#define HW_RTC_RAR_WR(x, v) (HW_RTC_RAR(x).U = (v)) +#define HW_RTC_RAR_SET(x, v) (HW_RTC_RAR_WR(x, HW_RTC_RAR_RD(x) | (v))) +#define HW_RTC_RAR_CLR(x, v) (HW_RTC_RAR_WR(x, HW_RTC_RAR_RD(x) & ~(v))) +#define HW_RTC_RAR_TOG(x, v) (HW_RTC_RAR_WR(x, HW_RTC_RAR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual RTC_RAR bitfields + */ + +/*! + * @name Register RTC_RAR, field TSRR[0] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Time Seconds Register are ignored. + * - 1 - Reads to the Time Seconds Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_TSRR (0U) /*!< Bit position for RTC_RAR_TSRR. */ +#define BM_RTC_RAR_TSRR (0x00000001U) /*!< Bit mask for RTC_RAR_TSRR. */ +#define BS_RTC_RAR_TSRR (1U) /*!< Bit field size in bits for RTC_RAR_TSRR. */ + +/*! @brief Read current value of the RTC_RAR_TSRR field. */ +#define BR_RTC_RAR_TSRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TSRR)) + +/*! @brief Format value for bitfield RTC_RAR_TSRR. */ +#define BF_RTC_RAR_TSRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_TSRR) & BM_RTC_RAR_TSRR) + +/*! @brief Set the TSRR field to a new value. */ +#define BW_RTC_RAR_TSRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TSRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field TPRR[1] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Time Pprescaler Register are ignored. + * - 1 - Reads to the Time Prescaler Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_TPRR (1U) /*!< Bit position for RTC_RAR_TPRR. */ +#define BM_RTC_RAR_TPRR (0x00000002U) /*!< Bit mask for RTC_RAR_TPRR. */ +#define BS_RTC_RAR_TPRR (1U) /*!< Bit field size in bits for RTC_RAR_TPRR. */ + +/*! @brief Read current value of the RTC_RAR_TPRR field. */ +#define BR_RTC_RAR_TPRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TPRR)) + +/*! @brief Format value for bitfield RTC_RAR_TPRR. */ +#define BF_RTC_RAR_TPRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_TPRR) & BM_RTC_RAR_TPRR) + +/*! @brief Set the TPRR field to a new value. */ +#define BW_RTC_RAR_TPRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TPRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field TARR[2] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Time Alarm Register are ignored. + * - 1 - Reads to the Time Alarm Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_TARR (2U) /*!< Bit position for RTC_RAR_TARR. */ +#define BM_RTC_RAR_TARR (0x00000004U) /*!< Bit mask for RTC_RAR_TARR. */ +#define BS_RTC_RAR_TARR (1U) /*!< Bit field size in bits for RTC_RAR_TARR. */ + +/*! @brief Read current value of the RTC_RAR_TARR field. */ +#define BR_RTC_RAR_TARR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TARR)) + +/*! @brief Format value for bitfield RTC_RAR_TARR. */ +#define BF_RTC_RAR_TARR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_TARR) & BM_RTC_RAR_TARR) + +/*! @brief Set the TARR field to a new value. */ +#define BW_RTC_RAR_TARR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TARR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field TCRR[3] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Time Compensation Register are ignored. + * - 1 - Reads to the Time Compensation Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_TCRR (3U) /*!< Bit position for RTC_RAR_TCRR. */ +#define BM_RTC_RAR_TCRR (0x00000008U) /*!< Bit mask for RTC_RAR_TCRR. */ +#define BS_RTC_RAR_TCRR (1U) /*!< Bit field size in bits for RTC_RAR_TCRR. */ + +/*! @brief Read current value of the RTC_RAR_TCRR field. */ +#define BR_RTC_RAR_TCRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TCRR)) + +/*! @brief Format value for bitfield RTC_RAR_TCRR. */ +#define BF_RTC_RAR_TCRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_TCRR) & BM_RTC_RAR_TCRR) + +/*! @brief Set the TCRR field to a new value. */ +#define BW_RTC_RAR_TCRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_TCRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field CRR[4] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Control Register are ignored. + * - 1 - Reads to the Control Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_CRR (4U) /*!< Bit position for RTC_RAR_CRR. */ +#define BM_RTC_RAR_CRR (0x00000010U) /*!< Bit mask for RTC_RAR_CRR. */ +#define BS_RTC_RAR_CRR (1U) /*!< Bit field size in bits for RTC_RAR_CRR. */ + +/*! @brief Read current value of the RTC_RAR_CRR field. */ +#define BR_RTC_RAR_CRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_CRR)) + +/*! @brief Format value for bitfield RTC_RAR_CRR. */ +#define BF_RTC_RAR_CRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_CRR) & BM_RTC_RAR_CRR) + +/*! @brief Set the CRR field to a new value. */ +#define BW_RTC_RAR_CRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_CRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field SRR[5] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Status Register are ignored. + * - 1 - Reads to the Status Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_SRR (5U) /*!< Bit position for RTC_RAR_SRR. */ +#define BM_RTC_RAR_SRR (0x00000020U) /*!< Bit mask for RTC_RAR_SRR. */ +#define BS_RTC_RAR_SRR (1U) /*!< Bit field size in bits for RTC_RAR_SRR. */ + +/*! @brief Read current value of the RTC_RAR_SRR field. */ +#define BR_RTC_RAR_SRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_SRR)) + +/*! @brief Format value for bitfield RTC_RAR_SRR. */ +#define BF_RTC_RAR_SRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_SRR) & BM_RTC_RAR_SRR) + +/*! @brief Set the SRR field to a new value. */ +#define BW_RTC_RAR_SRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_SRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field LRR[6] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Lock Register are ignored. + * - 1 - Reads to the Lock Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_LRR (6U) /*!< Bit position for RTC_RAR_LRR. */ +#define BM_RTC_RAR_LRR (0x00000040U) /*!< Bit mask for RTC_RAR_LRR. */ +#define BS_RTC_RAR_LRR (1U) /*!< Bit field size in bits for RTC_RAR_LRR. */ + +/*! @brief Read current value of the RTC_RAR_LRR field. */ +#define BR_RTC_RAR_LRR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_LRR)) + +/*! @brief Format value for bitfield RTC_RAR_LRR. */ +#define BF_RTC_RAR_LRR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_LRR) & BM_RTC_RAR_LRR) + +/*! @brief Set the LRR field to a new value. */ +#define BW_RTC_RAR_LRR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_LRR) = (v)) +/*@}*/ + +/*! + * @name Register RTC_RAR, field IERR[7] (RW) + * + * After being cleared, this bit is set only by system reset. It is not affected + * by VBAT POR or software reset. + * + * Values: + * - 0 - Reads to the Interrupt Enable Register are ignored. + * - 1 - Reads to the Interrupt Enable Register complete as normal. + */ +/*@{*/ +#define BP_RTC_RAR_IERR (7U) /*!< Bit position for RTC_RAR_IERR. */ +#define BM_RTC_RAR_IERR (0x00000080U) /*!< Bit mask for RTC_RAR_IERR. */ +#define BS_RTC_RAR_IERR (1U) /*!< Bit field size in bits for RTC_RAR_IERR. */ + +/*! @brief Read current value of the RTC_RAR_IERR field. */ +#define BR_RTC_RAR_IERR(x) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_IERR)) + +/*! @brief Format value for bitfield RTC_RAR_IERR. */ +#define BF_RTC_RAR_IERR(v) ((uint32_t)((uint32_t)(v) << BP_RTC_RAR_IERR) & BM_RTC_RAR_IERR) + +/*! @brief Set the IERR field to a new value. */ +#define BW_RTC_RAR_IERR(x, v) (BITBAND_ACCESS32(HW_RTC_RAR_ADDR(x), BP_RTC_RAR_IERR) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_rtc_t - module struct + ******************************************************************************/ +/*! + * @brief All RTC module registers. + */ +#pragma pack(1) +typedef struct _hw_rtc +{ + __IO hw_rtc_tsr_t TSR; /*!< [0x0] RTC Time Seconds Register */ + __IO hw_rtc_tpr_t TPR; /*!< [0x4] RTC Time Prescaler Register */ + __IO hw_rtc_tar_t TAR; /*!< [0x8] RTC Time Alarm Register */ + __IO hw_rtc_tcr_t TCR; /*!< [0xC] RTC Time Compensation Register */ + __IO hw_rtc_cr_t CR; /*!< [0x10] RTC Control Register */ + __IO hw_rtc_sr_t SR; /*!< [0x14] RTC Status Register */ + __IO hw_rtc_lr_t LR; /*!< [0x18] RTC Lock Register */ + __IO hw_rtc_ier_t IER; /*!< [0x1C] RTC Interrupt Enable Register */ + uint8_t _reserved0[2016]; + __IO hw_rtc_war_t WAR; /*!< [0x800] RTC Write Access Register */ + __IO hw_rtc_rar_t RAR; /*!< [0x804] RTC Read Access Register */ +} hw_rtc_t; +#pragma pack() + +/*! @brief Macro to access all RTC registers. */ +/*! @param x RTC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_RTC(RTC_BASE)</code>. */ +#define HW_RTC(x) (*(hw_rtc_t *)(x)) + +#endif /* __HW_RTC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_sim.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_sim.h new file mode 100644 index 0000000000..e476c5ca1b --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_sim.h @@ -0,0 +1,4023 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_SIM_REGISTERS_H__ +#define __HW_SIM_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 SIM + * + * System Integration Module + * + * Registers defined in this header file: + * - HW_SIM_SOPT1 - System Options Register 1 + * - HW_SIM_SOPT1CFG - SOPT1 Configuration Register + * - HW_SIM_SOPT2 - System Options Register 2 + * - HW_SIM_SOPT4 - System Options Register 4 + * - HW_SIM_SOPT5 - System Options Register 5 + * - HW_SIM_SOPT7 - System Options Register 7 + * - HW_SIM_SOPT8 - System Options Register 8 + * - HW_SIM_SDID - System Device Identification Register + * - HW_SIM_SCGC4 - System Clock Gating Control Register 4 + * - HW_SIM_SCGC5 - System Clock Gating Control Register 5 + * - HW_SIM_SCGC6 - System Clock Gating Control Register 6 + * - HW_SIM_SCGC7 - System Clock Gating Control Register 7 + * - HW_SIM_CLKDIV1 - System Clock Divider Register 1 + * - HW_SIM_CLKDIV2 - System Clock Divider Register 2 + * - HW_SIM_FCFG1 - Flash Configuration Register 1 + * - HW_SIM_FCFG2 - Flash Configuration Register 2 + * - HW_SIM_UIDH - Unique Identification Register High + * - HW_SIM_UIDMH - Unique Identification Register Mid-High + * - HW_SIM_UIDML - Unique Identification Register Mid Low + * - HW_SIM_UIDL - Unique Identification Register Low + * + * - hw_sim_t - Struct containing all module registers. + */ + +#define HW_SIM_INSTANCE_COUNT (1U) /*!< Number of instances of the SIM module. */ + +/******************************************************************************* + * HW_SIM_SOPT1 - System Options Register 1 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT1 - System Options Register 1 (RW) + * + * Reset value: 0x80000000U + * + * The SOPT1 register is only reset on POR or LVD. + */ +typedef union _hw_sim_sopt1 +{ + uint32_t U; + struct _hw_sim_sopt1_bitfields + { + uint32_t RESERVED0 : 12; /*!< [11:0] */ + uint32_t RAMSIZE : 4; /*!< [15:12] RAM size */ + uint32_t OSC32KOUT : 2; /*!< [17:16] 32K Oscillator Clock Output */ + uint32_t OSC32KSEL : 2; /*!< [19:18] 32K oscillator clock select */ + uint32_t RESERVED1 : 9; /*!< [28:20] */ + uint32_t USBVSTBY : 1; /*!< [29] USB voltage regulator in standby + * mode during VLPR and VLPW modes */ + uint32_t USBSSTBY : 1; /*!< [30] USB voltage regulator in standby + * mode during Stop, VLPS, LLS and VLLS modes. */ + uint32_t USBREGEN : 1; /*!< [31] USB voltage regulator enable */ + } B; +} hw_sim_sopt1_t; + +/*! + * @name Constants and macros for entire SIM_SOPT1 register + */ +/*@{*/ +#define HW_SIM_SOPT1_ADDR(x) ((x) + 0x0U) + +#define HW_SIM_SOPT1(x) (*(__IO hw_sim_sopt1_t *) HW_SIM_SOPT1_ADDR(x)) +#define HW_SIM_SOPT1_RD(x) (HW_SIM_SOPT1(x).U) +#define HW_SIM_SOPT1_WR(x, v) (HW_SIM_SOPT1(x).U = (v)) +#define HW_SIM_SOPT1_SET(x, v) (HW_SIM_SOPT1_WR(x, HW_SIM_SOPT1_RD(x) | (v))) +#define HW_SIM_SOPT1_CLR(x, v) (HW_SIM_SOPT1_WR(x, HW_SIM_SOPT1_RD(x) & ~(v))) +#define HW_SIM_SOPT1_TOG(x, v) (HW_SIM_SOPT1_WR(x, HW_SIM_SOPT1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT1 bitfields + */ + +/*! + * @name Register SIM_SOPT1, field RAMSIZE[15:12] (RO) + * + * This field specifies the amount of system RAM available on the device. + * + * Values: + * - 0001 - 8 KB + * - 0011 - 16 KB + * - 0100 - 24 KB + * - 0101 - 32 KB + * - 0110 - 48 KB + * - 0111 - 64 KB + * - 1000 - 96 KB + * - 1001 - 128 KB + * - 1011 - 256 KB + */ +/*@{*/ +#define BP_SIM_SOPT1_RAMSIZE (12U) /*!< Bit position for SIM_SOPT1_RAMSIZE. */ +#define BM_SIM_SOPT1_RAMSIZE (0x0000F000U) /*!< Bit mask for SIM_SOPT1_RAMSIZE. */ +#define BS_SIM_SOPT1_RAMSIZE (4U) /*!< Bit field size in bits for SIM_SOPT1_RAMSIZE. */ + +/*! @brief Read current value of the SIM_SOPT1_RAMSIZE field. */ +#define BR_SIM_SOPT1_RAMSIZE(x) (HW_SIM_SOPT1(x).B.RAMSIZE) +/*@}*/ + +/*! + * @name Register SIM_SOPT1, field OSC32KOUT[17:16] (RW) + * + * Outputs the ERCLK32K on the selected pin in all modes of operation (including + * LLS/VLLS and System Reset), overriding the existing pin mux configuration for + * that pin. This field is reset only on POR/LVD. + * + * Values: + * - 00 - ERCLK32K is not output. + * - 01 - ERCLK32K is output on PTE0. + * - 10 - ERCLK32K is output on PTE26. + * - 11 - Reserved. + */ +/*@{*/ +#define BP_SIM_SOPT1_OSC32KOUT (16U) /*!< Bit position for SIM_SOPT1_OSC32KOUT. */ +#define BM_SIM_SOPT1_OSC32KOUT (0x00030000U) /*!< Bit mask for SIM_SOPT1_OSC32KOUT. */ +#define BS_SIM_SOPT1_OSC32KOUT (2U) /*!< Bit field size in bits for SIM_SOPT1_OSC32KOUT. */ + +/*! @brief Read current value of the SIM_SOPT1_OSC32KOUT field. */ +#define BR_SIM_SOPT1_OSC32KOUT(x) (HW_SIM_SOPT1(x).B.OSC32KOUT) + +/*! @brief Format value for bitfield SIM_SOPT1_OSC32KOUT. */ +#define BF_SIM_SOPT1_OSC32KOUT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1_OSC32KOUT) & BM_SIM_SOPT1_OSC32KOUT) + +/*! @brief Set the OSC32KOUT field to a new value. */ +#define BW_SIM_SOPT1_OSC32KOUT(x, v) (HW_SIM_SOPT1_WR(x, (HW_SIM_SOPT1_RD(x) & ~BM_SIM_SOPT1_OSC32KOUT) | BF_SIM_SOPT1_OSC32KOUT(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT1, field OSC32KSEL[19:18] (RW) + * + * Selects the 32 kHz clock source (ERCLK32K) for LPTMR. This field is reset + * only on POR/LVD. + * + * Values: + * - 00 - System oscillator (OSC32KCLK) + * - 01 - Reserved + * - 10 - RTC 32.768kHz oscillator + * - 11 - LPO 1 kHz + */ +/*@{*/ +#define BP_SIM_SOPT1_OSC32KSEL (18U) /*!< Bit position for SIM_SOPT1_OSC32KSEL. */ +#define BM_SIM_SOPT1_OSC32KSEL (0x000C0000U) /*!< Bit mask for SIM_SOPT1_OSC32KSEL. */ +#define BS_SIM_SOPT1_OSC32KSEL (2U) /*!< Bit field size in bits for SIM_SOPT1_OSC32KSEL. */ + +/*! @brief Read current value of the SIM_SOPT1_OSC32KSEL field. */ +#define BR_SIM_SOPT1_OSC32KSEL(x) (HW_SIM_SOPT1(x).B.OSC32KSEL) + +/*! @brief Format value for bitfield SIM_SOPT1_OSC32KSEL. */ +#define BF_SIM_SOPT1_OSC32KSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1_OSC32KSEL) & BM_SIM_SOPT1_OSC32KSEL) + +/*! @brief Set the OSC32KSEL field to a new value. */ +#define BW_SIM_SOPT1_OSC32KSEL(x, v) (HW_SIM_SOPT1_WR(x, (HW_SIM_SOPT1_RD(x) & ~BM_SIM_SOPT1_OSC32KSEL) | BF_SIM_SOPT1_OSC32KSEL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT1, field USBVSTBY[29] (RW) + * + * Controls whether the USB voltage regulator is placed in standby mode during + * VLPR and VLPW modes. + * + * Values: + * - 0 - USB voltage regulator not in standby during VLPR and VLPW modes. + * - 1 - USB voltage regulator in standby during VLPR and VLPW modes. + */ +/*@{*/ +#define BP_SIM_SOPT1_USBVSTBY (29U) /*!< Bit position for SIM_SOPT1_USBVSTBY. */ +#define BM_SIM_SOPT1_USBVSTBY (0x20000000U) /*!< Bit mask for SIM_SOPT1_USBVSTBY. */ +#define BS_SIM_SOPT1_USBVSTBY (1U) /*!< Bit field size in bits for SIM_SOPT1_USBVSTBY. */ + +/*! @brief Read current value of the SIM_SOPT1_USBVSTBY field. */ +#define BR_SIM_SOPT1_USBVSTBY(x) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBVSTBY)) + +/*! @brief Format value for bitfield SIM_SOPT1_USBVSTBY. */ +#define BF_SIM_SOPT1_USBVSTBY(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1_USBVSTBY) & BM_SIM_SOPT1_USBVSTBY) + +/*! @brief Set the USBVSTBY field to a new value. */ +#define BW_SIM_SOPT1_USBVSTBY(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBVSTBY) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT1, field USBSSTBY[30] (RW) + * + * Controls whether the USB voltage regulator is placed in standby mode during + * Stop, VLPS, LLS and VLLS modes. + * + * Values: + * - 0 - USB voltage regulator not in standby during Stop, VLPS, LLS and VLLS + * modes. + * - 1 - USB voltage regulator in standby during Stop, VLPS, LLS and VLLS modes. + */ +/*@{*/ +#define BP_SIM_SOPT1_USBSSTBY (30U) /*!< Bit position for SIM_SOPT1_USBSSTBY. */ +#define BM_SIM_SOPT1_USBSSTBY (0x40000000U) /*!< Bit mask for SIM_SOPT1_USBSSTBY. */ +#define BS_SIM_SOPT1_USBSSTBY (1U) /*!< Bit field size in bits for SIM_SOPT1_USBSSTBY. */ + +/*! @brief Read current value of the SIM_SOPT1_USBSSTBY field. */ +#define BR_SIM_SOPT1_USBSSTBY(x) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBSSTBY)) + +/*! @brief Format value for bitfield SIM_SOPT1_USBSSTBY. */ +#define BF_SIM_SOPT1_USBSSTBY(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1_USBSSTBY) & BM_SIM_SOPT1_USBSSTBY) + +/*! @brief Set the USBSSTBY field to a new value. */ +#define BW_SIM_SOPT1_USBSSTBY(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBSSTBY) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT1, field USBREGEN[31] (RW) + * + * Controls whether the USB voltage regulator is enabled. + * + * Values: + * - 0 - USB voltage regulator is disabled. + * - 1 - USB voltage regulator is enabled. + */ +/*@{*/ +#define BP_SIM_SOPT1_USBREGEN (31U) /*!< Bit position for SIM_SOPT1_USBREGEN. */ +#define BM_SIM_SOPT1_USBREGEN (0x80000000U) /*!< Bit mask for SIM_SOPT1_USBREGEN. */ +#define BS_SIM_SOPT1_USBREGEN (1U) /*!< Bit field size in bits for SIM_SOPT1_USBREGEN. */ + +/*! @brief Read current value of the SIM_SOPT1_USBREGEN field. */ +#define BR_SIM_SOPT1_USBREGEN(x) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBREGEN)) + +/*! @brief Format value for bitfield SIM_SOPT1_USBREGEN. */ +#define BF_SIM_SOPT1_USBREGEN(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1_USBREGEN) & BM_SIM_SOPT1_USBREGEN) + +/*! @brief Set the USBREGEN field to a new value. */ +#define BW_SIM_SOPT1_USBREGEN(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1_ADDR(x), BP_SIM_SOPT1_USBREGEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT1CFG - SOPT1 Configuration Register + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT1CFG - SOPT1 Configuration Register (RW) + * + * Reset value: 0x00000000U + * + * The SOPT1CFG register is reset on System Reset not VLLS. + */ +typedef union _hw_sim_sopt1cfg +{ + uint32_t U; + struct _hw_sim_sopt1cfg_bitfields + { + uint32_t RESERVED0 : 24; /*!< [23:0] */ + uint32_t URWE : 1; /*!< [24] USB voltage regulator enable write + * enable */ + uint32_t UVSWE : 1; /*!< [25] USB voltage regulator VLP standby write + * enable */ + uint32_t USSWE : 1; /*!< [26] USB voltage regulator stop standby + * write enable */ + uint32_t RESERVED1 : 5; /*!< [31:27] */ + } B; +} hw_sim_sopt1cfg_t; + +/*! + * @name Constants and macros for entire SIM_SOPT1CFG register + */ +/*@{*/ +#define HW_SIM_SOPT1CFG_ADDR(x) ((x) + 0x4U) + +#define HW_SIM_SOPT1CFG(x) (*(__IO hw_sim_sopt1cfg_t *) HW_SIM_SOPT1CFG_ADDR(x)) +#define HW_SIM_SOPT1CFG_RD(x) (HW_SIM_SOPT1CFG(x).U) +#define HW_SIM_SOPT1CFG_WR(x, v) (HW_SIM_SOPT1CFG(x).U = (v)) +#define HW_SIM_SOPT1CFG_SET(x, v) (HW_SIM_SOPT1CFG_WR(x, HW_SIM_SOPT1CFG_RD(x) | (v))) +#define HW_SIM_SOPT1CFG_CLR(x, v) (HW_SIM_SOPT1CFG_WR(x, HW_SIM_SOPT1CFG_RD(x) & ~(v))) +#define HW_SIM_SOPT1CFG_TOG(x, v) (HW_SIM_SOPT1CFG_WR(x, HW_SIM_SOPT1CFG_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT1CFG bitfields + */ + +/*! + * @name Register SIM_SOPT1CFG, field URWE[24] (RW) + * + * Writing one to the URWE bit allows the SOPT1 USBREGEN bit to be written. This + * register bit clears after a write to USBREGEN. + * + * Values: + * - 0 - SOPT1 USBREGEN cannot be written. + * - 1 - SOPT1 USBREGEN can be written. + */ +/*@{*/ +#define BP_SIM_SOPT1CFG_URWE (24U) /*!< Bit position for SIM_SOPT1CFG_URWE. */ +#define BM_SIM_SOPT1CFG_URWE (0x01000000U) /*!< Bit mask for SIM_SOPT1CFG_URWE. */ +#define BS_SIM_SOPT1CFG_URWE (1U) /*!< Bit field size in bits for SIM_SOPT1CFG_URWE. */ + +/*! @brief Read current value of the SIM_SOPT1CFG_URWE field. */ +#define BR_SIM_SOPT1CFG_URWE(x) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_URWE)) + +/*! @brief Format value for bitfield SIM_SOPT1CFG_URWE. */ +#define BF_SIM_SOPT1CFG_URWE(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1CFG_URWE) & BM_SIM_SOPT1CFG_URWE) + +/*! @brief Set the URWE field to a new value. */ +#define BW_SIM_SOPT1CFG_URWE(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_URWE) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT1CFG, field UVSWE[25] (RW) + * + * Writing one to the UVSWE bit allows the SOPT1 USBVSTBY bit to be written. + * This register bit clears after a write to USBVSTBY. + * + * Values: + * - 0 - SOPT1 USBVSTBY cannot be written. + * - 1 - SOPT1 USBVSTBY can be written. + */ +/*@{*/ +#define BP_SIM_SOPT1CFG_UVSWE (25U) /*!< Bit position for SIM_SOPT1CFG_UVSWE. */ +#define BM_SIM_SOPT1CFG_UVSWE (0x02000000U) /*!< Bit mask for SIM_SOPT1CFG_UVSWE. */ +#define BS_SIM_SOPT1CFG_UVSWE (1U) /*!< Bit field size in bits for SIM_SOPT1CFG_UVSWE. */ + +/*! @brief Read current value of the SIM_SOPT1CFG_UVSWE field. */ +#define BR_SIM_SOPT1CFG_UVSWE(x) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_UVSWE)) + +/*! @brief Format value for bitfield SIM_SOPT1CFG_UVSWE. */ +#define BF_SIM_SOPT1CFG_UVSWE(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1CFG_UVSWE) & BM_SIM_SOPT1CFG_UVSWE) + +/*! @brief Set the UVSWE field to a new value. */ +#define BW_SIM_SOPT1CFG_UVSWE(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_UVSWE) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT1CFG, field USSWE[26] (RW) + * + * Writing one to the USSWE bit allows the SOPT1 USBSSTBY bit to be written. + * This register bit clears after a write to USBSSTBY. + * + * Values: + * - 0 - SOPT1 USBSSTBY cannot be written. + * - 1 - SOPT1 USBSSTBY can be written. + */ +/*@{*/ +#define BP_SIM_SOPT1CFG_USSWE (26U) /*!< Bit position for SIM_SOPT1CFG_USSWE. */ +#define BM_SIM_SOPT1CFG_USSWE (0x04000000U) /*!< Bit mask for SIM_SOPT1CFG_USSWE. */ +#define BS_SIM_SOPT1CFG_USSWE (1U) /*!< Bit field size in bits for SIM_SOPT1CFG_USSWE. */ + +/*! @brief Read current value of the SIM_SOPT1CFG_USSWE field. */ +#define BR_SIM_SOPT1CFG_USSWE(x) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_USSWE)) + +/*! @brief Format value for bitfield SIM_SOPT1CFG_USSWE. */ +#define BF_SIM_SOPT1CFG_USSWE(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT1CFG_USSWE) & BM_SIM_SOPT1CFG_USSWE) + +/*! @brief Set the USSWE field to a new value. */ +#define BW_SIM_SOPT1CFG_USSWE(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT1CFG_ADDR(x), BP_SIM_SOPT1CFG_USSWE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT2 - System Options Register 2 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT2 - System Options Register 2 (RW) + * + * Reset value: 0x00001000U + * + * SOPT2 contains the controls for selecting many of the module clock source + * options on this device. See the Clock Distribution chapter for more information + * including clocking diagrams and definitions of device clocks. + */ +typedef union _hw_sim_sopt2 +{ + uint32_t U; + struct _hw_sim_sopt2_bitfields + { + uint32_t RESERVED0 : 4; /*!< [3:0] */ + uint32_t RTCCLKOUTSEL : 1; /*!< [4] RTC clock out select */ + uint32_t CLKOUTSEL : 3; /*!< [7:5] CLKOUT select */ + uint32_t FBSL : 2; /*!< [9:8] FlexBus security level */ + uint32_t RESERVED1 : 2; /*!< [11:10] */ + uint32_t TRACECLKSEL : 1; /*!< [12] Debug trace clock select */ + uint32_t RESERVED2 : 3; /*!< [15:13] */ + uint32_t PLLFLLSEL : 2; /*!< [17:16] PLL/FLL clock select */ + uint32_t USBSRC : 1; /*!< [18] USB clock source select */ + uint32_t RESERVED3 : 7; /*!< [25:19] */ + uint32_t LPUARTSRC : 2; /*!< [27:26] LPUART clock source select */ + uint32_t RESERVED4 : 4; /*!< [31:28] */ + } B; +} hw_sim_sopt2_t; + +/*! + * @name Constants and macros for entire SIM_SOPT2 register + */ +/*@{*/ +#define HW_SIM_SOPT2_ADDR(x) ((x) + 0x1004U) + +#define HW_SIM_SOPT2(x) (*(__IO hw_sim_sopt2_t *) HW_SIM_SOPT2_ADDR(x)) +#define HW_SIM_SOPT2_RD(x) (HW_SIM_SOPT2(x).U) +#define HW_SIM_SOPT2_WR(x, v) (HW_SIM_SOPT2(x).U = (v)) +#define HW_SIM_SOPT2_SET(x, v) (HW_SIM_SOPT2_WR(x, HW_SIM_SOPT2_RD(x) | (v))) +#define HW_SIM_SOPT2_CLR(x, v) (HW_SIM_SOPT2_WR(x, HW_SIM_SOPT2_RD(x) & ~(v))) +#define HW_SIM_SOPT2_TOG(x, v) (HW_SIM_SOPT2_WR(x, HW_SIM_SOPT2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT2 bitfields + */ + +/*! + * @name Register SIM_SOPT2, field RTCCLKOUTSEL[4] (RW) + * + * Selects either the RTC 1 Hz clock or the 32.768kHz clock to be output on the + * RTC_CLKOUT pin. + * + * Values: + * - 0 - RTC 1 Hz clock is output on the RTC_CLKOUT pin. + * - 1 - RTC 32.768kHz clock is output on the RTC_CLKOUT pin. + */ +/*@{*/ +#define BP_SIM_SOPT2_RTCCLKOUTSEL (4U) /*!< Bit position for SIM_SOPT2_RTCCLKOUTSEL. */ +#define BM_SIM_SOPT2_RTCCLKOUTSEL (0x00000010U) /*!< Bit mask for SIM_SOPT2_RTCCLKOUTSEL. */ +#define BS_SIM_SOPT2_RTCCLKOUTSEL (1U) /*!< Bit field size in bits for SIM_SOPT2_RTCCLKOUTSEL. */ + +/*! @brief Read current value of the SIM_SOPT2_RTCCLKOUTSEL field. */ +#define BR_SIM_SOPT2_RTCCLKOUTSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_RTCCLKOUTSEL)) + +/*! @brief Format value for bitfield SIM_SOPT2_RTCCLKOUTSEL. */ +#define BF_SIM_SOPT2_RTCCLKOUTSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_RTCCLKOUTSEL) & BM_SIM_SOPT2_RTCCLKOUTSEL) + +/*! @brief Set the RTCCLKOUTSEL field to a new value. */ +#define BW_SIM_SOPT2_RTCCLKOUTSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_RTCCLKOUTSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field CLKOUTSEL[7:5] (RW) + * + * Selects the clock to output on the CLKOUT pin. + * + * Values: + * - 000 - FlexBus CLKOUT + * - 001 - Reserved + * - 010 - Flash clock + * - 011 - LPO clock (1 kHz) + * - 100 - MCGIRCLK + * - 101 - RTC 32.768kHz clock + * - 110 - OSCERCLK0 + * - 111 - IRC 48 MHz clock + */ +/*@{*/ +#define BP_SIM_SOPT2_CLKOUTSEL (5U) /*!< Bit position for SIM_SOPT2_CLKOUTSEL. */ +#define BM_SIM_SOPT2_CLKOUTSEL (0x000000E0U) /*!< Bit mask for SIM_SOPT2_CLKOUTSEL. */ +#define BS_SIM_SOPT2_CLKOUTSEL (3U) /*!< Bit field size in bits for SIM_SOPT2_CLKOUTSEL. */ + +/*! @brief Read current value of the SIM_SOPT2_CLKOUTSEL field. */ +#define BR_SIM_SOPT2_CLKOUTSEL(x) (HW_SIM_SOPT2(x).B.CLKOUTSEL) + +/*! @brief Format value for bitfield SIM_SOPT2_CLKOUTSEL. */ +#define BF_SIM_SOPT2_CLKOUTSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_CLKOUTSEL) & BM_SIM_SOPT2_CLKOUTSEL) + +/*! @brief Set the CLKOUTSEL field to a new value. */ +#define BW_SIM_SOPT2_CLKOUTSEL(x, v) (HW_SIM_SOPT2_WR(x, (HW_SIM_SOPT2_RD(x) & ~BM_SIM_SOPT2_CLKOUTSEL) | BF_SIM_SOPT2_CLKOUTSEL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field FBSL[9:8] (RW) + * + * If flash security is enabled, then this field affects what CPU operations can + * access off-chip via the FlexBus interface. This field has no effect if flash + * security is not enabled. + * + * Values: + * - 00 - All off-chip accesses (instruction and data) via the FlexBus are + * disallowed. + * - 01 - All off-chip accesses (instruction and data) via the FlexBus are + * disallowed. + * - 10 - Off-chip instruction accesses are disallowed. Data accesses are + * allowed. + * - 11 - Off-chip instruction accesses and data accesses are allowed. + */ +/*@{*/ +#define BP_SIM_SOPT2_FBSL (8U) /*!< Bit position for SIM_SOPT2_FBSL. */ +#define BM_SIM_SOPT2_FBSL (0x00000300U) /*!< Bit mask for SIM_SOPT2_FBSL. */ +#define BS_SIM_SOPT2_FBSL (2U) /*!< Bit field size in bits for SIM_SOPT2_FBSL. */ + +/*! @brief Read current value of the SIM_SOPT2_FBSL field. */ +#define BR_SIM_SOPT2_FBSL(x) (HW_SIM_SOPT2(x).B.FBSL) + +/*! @brief Format value for bitfield SIM_SOPT2_FBSL. */ +#define BF_SIM_SOPT2_FBSL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_FBSL) & BM_SIM_SOPT2_FBSL) + +/*! @brief Set the FBSL field to a new value. */ +#define BW_SIM_SOPT2_FBSL(x, v) (HW_SIM_SOPT2_WR(x, (HW_SIM_SOPT2_RD(x) & ~BM_SIM_SOPT2_FBSL) | BF_SIM_SOPT2_FBSL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field TRACECLKSEL[12] (RW) + * + * Selects the core/system clock or MCG output clock (MCGOUTCLK) as the trace + * clock source. + * + * Values: + * - 0 - MCGOUTCLK + * - 1 - Core/system clock + */ +/*@{*/ +#define BP_SIM_SOPT2_TRACECLKSEL (12U) /*!< Bit position for SIM_SOPT2_TRACECLKSEL. */ +#define BM_SIM_SOPT2_TRACECLKSEL (0x00001000U) /*!< Bit mask for SIM_SOPT2_TRACECLKSEL. */ +#define BS_SIM_SOPT2_TRACECLKSEL (1U) /*!< Bit field size in bits for SIM_SOPT2_TRACECLKSEL. */ + +/*! @brief Read current value of the SIM_SOPT2_TRACECLKSEL field. */ +#define BR_SIM_SOPT2_TRACECLKSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_TRACECLKSEL)) + +/*! @brief Format value for bitfield SIM_SOPT2_TRACECLKSEL. */ +#define BF_SIM_SOPT2_TRACECLKSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_TRACECLKSEL) & BM_SIM_SOPT2_TRACECLKSEL) + +/*! @brief Set the TRACECLKSEL field to a new value. */ +#define BW_SIM_SOPT2_TRACECLKSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_TRACECLKSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field PLLFLLSEL[17:16] (RW) + * + * Selects the high frequency clock for various peripheral clocking options. + * + * Values: + * - 00 - MCGFLLCLK clock + * - 01 - MCGPLLCLK clock + * - 10 - Reserved + * - 11 - IRC48 MHz clock + */ +/*@{*/ +#define BP_SIM_SOPT2_PLLFLLSEL (16U) /*!< Bit position for SIM_SOPT2_PLLFLLSEL. */ +#define BM_SIM_SOPT2_PLLFLLSEL (0x00030000U) /*!< Bit mask for SIM_SOPT2_PLLFLLSEL. */ +#define BS_SIM_SOPT2_PLLFLLSEL (2U) /*!< Bit field size in bits for SIM_SOPT2_PLLFLLSEL. */ + +/*! @brief Read current value of the SIM_SOPT2_PLLFLLSEL field. */ +#define BR_SIM_SOPT2_PLLFLLSEL(x) (HW_SIM_SOPT2(x).B.PLLFLLSEL) + +/*! @brief Format value for bitfield SIM_SOPT2_PLLFLLSEL. */ +#define BF_SIM_SOPT2_PLLFLLSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_PLLFLLSEL) & BM_SIM_SOPT2_PLLFLLSEL) + +/*! @brief Set the PLLFLLSEL field to a new value. */ +#define BW_SIM_SOPT2_PLLFLLSEL(x, v) (HW_SIM_SOPT2_WR(x, (HW_SIM_SOPT2_RD(x) & ~BM_SIM_SOPT2_PLLFLLSEL) | BF_SIM_SOPT2_PLLFLLSEL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field USBSRC[18] (RW) + * + * Selects the clock source for the USB 48 MHz clock. + * + * Values: + * - 0 - External bypass clock (USB_CLKIN). + * - 1 - MCGFLLCLK , or MCGPLLCLK , or IRC48M clock as selected by + * SOPT2[PLLFLLSEL], and then divided by the USB fractional divider as configured by + * SIM_CLKDIV2[USBFRAC, USBDIV]. + */ +/*@{*/ +#define BP_SIM_SOPT2_USBSRC (18U) /*!< Bit position for SIM_SOPT2_USBSRC. */ +#define BM_SIM_SOPT2_USBSRC (0x00040000U) /*!< Bit mask for SIM_SOPT2_USBSRC. */ +#define BS_SIM_SOPT2_USBSRC (1U) /*!< Bit field size in bits for SIM_SOPT2_USBSRC. */ + +/*! @brief Read current value of the SIM_SOPT2_USBSRC field. */ +#define BR_SIM_SOPT2_USBSRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_USBSRC)) + +/*! @brief Format value for bitfield SIM_SOPT2_USBSRC. */ +#define BF_SIM_SOPT2_USBSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_USBSRC) & BM_SIM_SOPT2_USBSRC) + +/*! @brief Set the USBSRC field to a new value. */ +#define BW_SIM_SOPT2_USBSRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT2_ADDR(x), BP_SIM_SOPT2_USBSRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT2, field LPUARTSRC[27:26] (RW) + * + * Selects the clock source for the LPUART transmit and receive clock. + * + * Values: + * - 00 - Clock disabled + * - 01 - MCGFLLCLK , or MCGPLLCLK , or IRC48M clock as selected by + * SOPT2[PLLFLLSEL]. + * - 10 - OSCERCLK clock + * - 11 - MCGIRCLK clock + */ +/*@{*/ +#define BP_SIM_SOPT2_LPUARTSRC (26U) /*!< Bit position for SIM_SOPT2_LPUARTSRC. */ +#define BM_SIM_SOPT2_LPUARTSRC (0x0C000000U) /*!< Bit mask for SIM_SOPT2_LPUARTSRC. */ +#define BS_SIM_SOPT2_LPUARTSRC (2U) /*!< Bit field size in bits for SIM_SOPT2_LPUARTSRC. */ + +/*! @brief Read current value of the SIM_SOPT2_LPUARTSRC field. */ +#define BR_SIM_SOPT2_LPUARTSRC(x) (HW_SIM_SOPT2(x).B.LPUARTSRC) + +/*! @brief Format value for bitfield SIM_SOPT2_LPUARTSRC. */ +#define BF_SIM_SOPT2_LPUARTSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT2_LPUARTSRC) & BM_SIM_SOPT2_LPUARTSRC) + +/*! @brief Set the LPUARTSRC field to a new value. */ +#define BW_SIM_SOPT2_LPUARTSRC(x, v) (HW_SIM_SOPT2_WR(x, (HW_SIM_SOPT2_RD(x) & ~BM_SIM_SOPT2_LPUARTSRC) | BF_SIM_SOPT2_LPUARTSRC(v))) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT4 - System Options Register 4 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT4 - System Options Register 4 (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_sopt4 +{ + uint32_t U; + struct _hw_sim_sopt4_bitfields + { + uint32_t FTM0FLT0 : 1; /*!< [0] FTM0 Fault 0 Select */ + uint32_t FTM0FLT1 : 1; /*!< [1] FTM0 Fault 1 Select */ + uint32_t RESERVED0 : 2; /*!< [3:2] */ + uint32_t FTM1FLT0 : 1; /*!< [4] FTM1 Fault 0 Select */ + uint32_t RESERVED1 : 3; /*!< [7:5] */ + uint32_t FTM2FLT0 : 1; /*!< [8] FTM2 Fault 0 Select */ + uint32_t RESERVED2 : 3; /*!< [11:9] */ + uint32_t FTM3FLT0 : 1; /*!< [12] FTM3 Fault 0 Select */ + uint32_t RESERVED3 : 5; /*!< [17:13] */ + uint32_t FTM1CH0SRC : 2; /*!< [19:18] FTM1 channel 0 input capture + * source select */ + uint32_t FTM2CH0SRC : 2; /*!< [21:20] FTM2 channel 0 input capture + * source select */ + uint32_t FTM2CH1SRC : 1; /*!< [22] FTM2 channel 1 input capture + * source select */ + uint32_t RESERVED4 : 1; /*!< [23] */ + uint32_t FTM0CLKSEL : 1; /*!< [24] FlexTimer 0 External Clock Pin + * Select */ + uint32_t FTM1CLKSEL : 1; /*!< [25] FTM1 External Clock Pin Select */ + uint32_t FTM2CLKSEL : 1; /*!< [26] FlexTimer 2 External Clock Pin + * Select */ + uint32_t FTM3CLKSEL : 1; /*!< [27] FlexTimer 3 External Clock Pin + * Select */ + uint32_t FTM0TRG0SRC : 1; /*!< [28] FlexTimer 0 Hardware Trigger 0 + * Source Select */ + uint32_t FTM0TRG1SRC : 1; /*!< [29] FlexTimer 0 Hardware Trigger 1 + * Source Select */ + uint32_t FTM3TRG0SRC : 1; /*!< [30] FlexTimer 3 Hardware Trigger 0 + * Source Select */ + uint32_t FTM3TRG1SRC : 1; /*!< [31] FlexTimer 3 Hardware Trigger 1 + * Source Select */ + } B; +} hw_sim_sopt4_t; + +/*! + * @name Constants and macros for entire SIM_SOPT4 register + */ +/*@{*/ +#define HW_SIM_SOPT4_ADDR(x) ((x) + 0x100CU) + +#define HW_SIM_SOPT4(x) (*(__IO hw_sim_sopt4_t *) HW_SIM_SOPT4_ADDR(x)) +#define HW_SIM_SOPT4_RD(x) (HW_SIM_SOPT4(x).U) +#define HW_SIM_SOPT4_WR(x, v) (HW_SIM_SOPT4(x).U = (v)) +#define HW_SIM_SOPT4_SET(x, v) (HW_SIM_SOPT4_WR(x, HW_SIM_SOPT4_RD(x) | (v))) +#define HW_SIM_SOPT4_CLR(x, v) (HW_SIM_SOPT4_WR(x, HW_SIM_SOPT4_RD(x) & ~(v))) +#define HW_SIM_SOPT4_TOG(x, v) (HW_SIM_SOPT4_WR(x, HW_SIM_SOPT4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT4 bitfields + */ + +/*! + * @name Register SIM_SOPT4, field FTM0FLT0[0] (RW) + * + * Selects the source of FTM0 fault 0. The pin source for fault 0 must be + * configured for the FTM module fault function through the appropriate pin control + * register in the port control module. + * + * Values: + * - 0 - FTM0_FLT0 pin + * - 1 - CMP0 out + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM0FLT0 (0U) /*!< Bit position for SIM_SOPT4_FTM0FLT0. */ +#define BM_SIM_SOPT4_FTM0FLT0 (0x00000001U) /*!< Bit mask for SIM_SOPT4_FTM0FLT0. */ +#define BS_SIM_SOPT4_FTM0FLT0 (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM0FLT0. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM0FLT0 field. */ +#define BR_SIM_SOPT4_FTM0FLT0(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0FLT0)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM0FLT0. */ +#define BF_SIM_SOPT4_FTM0FLT0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM0FLT0) & BM_SIM_SOPT4_FTM0FLT0) + +/*! @brief Set the FTM0FLT0 field to a new value. */ +#define BW_SIM_SOPT4_FTM0FLT0(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0FLT0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM0FLT1[1] (RW) + * + * Selects the source of FTM0 fault 1. The pin source for fault 1 must be + * configured for the FTM module fault function through the appropriate pin control + * register in the port control module. + * + * Values: + * - 0 - FTM0_FLT1 pin + * - 1 - CMP1 out + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM0FLT1 (1U) /*!< Bit position for SIM_SOPT4_FTM0FLT1. */ +#define BM_SIM_SOPT4_FTM0FLT1 (0x00000002U) /*!< Bit mask for SIM_SOPT4_FTM0FLT1. */ +#define BS_SIM_SOPT4_FTM0FLT1 (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM0FLT1. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM0FLT1 field. */ +#define BR_SIM_SOPT4_FTM0FLT1(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0FLT1)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM0FLT1. */ +#define BF_SIM_SOPT4_FTM0FLT1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM0FLT1) & BM_SIM_SOPT4_FTM0FLT1) + +/*! @brief Set the FTM0FLT1 field to a new value. */ +#define BW_SIM_SOPT4_FTM0FLT1(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0FLT1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM1FLT0[4] (RW) + * + * Selects the source of FTM1 fault 0. The pin source for fault 0 must be + * configured for the FTM module fault function through the appropriate pin control + * register in the port control module. + * + * Values: + * - 0 - FTM1_FLT0 pin + * - 1 - CMP0 out + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM1FLT0 (4U) /*!< Bit position for SIM_SOPT4_FTM1FLT0. */ +#define BM_SIM_SOPT4_FTM1FLT0 (0x00000010U) /*!< Bit mask for SIM_SOPT4_FTM1FLT0. */ +#define BS_SIM_SOPT4_FTM1FLT0 (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM1FLT0. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM1FLT0 field. */ +#define BR_SIM_SOPT4_FTM1FLT0(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM1FLT0)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM1FLT0. */ +#define BF_SIM_SOPT4_FTM1FLT0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM1FLT0) & BM_SIM_SOPT4_FTM1FLT0) + +/*! @brief Set the FTM1FLT0 field to a new value. */ +#define BW_SIM_SOPT4_FTM1FLT0(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM1FLT0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM2FLT0[8] (RW) + * + * Selects the source of FTM2 fault 0. The pin source for fault 0 must be + * configured for the FTM module fault function through the appropriate PORTx pin + * control register. + * + * Values: + * - 0 - FTM2_FLT0 pin + * - 1 - CMP0 out + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM2FLT0 (8U) /*!< Bit position for SIM_SOPT4_FTM2FLT0. */ +#define BM_SIM_SOPT4_FTM2FLT0 (0x00000100U) /*!< Bit mask for SIM_SOPT4_FTM2FLT0. */ +#define BS_SIM_SOPT4_FTM2FLT0 (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM2FLT0. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM2FLT0 field. */ +#define BR_SIM_SOPT4_FTM2FLT0(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2FLT0)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM2FLT0. */ +#define BF_SIM_SOPT4_FTM2FLT0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM2FLT0) & BM_SIM_SOPT4_FTM2FLT0) + +/*! @brief Set the FTM2FLT0 field to a new value. */ +#define BW_SIM_SOPT4_FTM2FLT0(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2FLT0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM3FLT0[12] (RW) + * + * Selects the source of FTM3 fault 0. The pin source for fault 0 must be + * configured for the FTM module fault function through the appropriate PORTx pin + * control register. + * + * Values: + * - 0 - FTM3_FLT0 pin + * - 1 - CMP0 out + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM3FLT0 (12U) /*!< Bit position for SIM_SOPT4_FTM3FLT0. */ +#define BM_SIM_SOPT4_FTM3FLT0 (0x00001000U) /*!< Bit mask for SIM_SOPT4_FTM3FLT0. */ +#define BS_SIM_SOPT4_FTM3FLT0 (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM3FLT0. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM3FLT0 field. */ +#define BR_SIM_SOPT4_FTM3FLT0(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3FLT0)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM3FLT0. */ +#define BF_SIM_SOPT4_FTM3FLT0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM3FLT0) & BM_SIM_SOPT4_FTM3FLT0) + +/*! @brief Set the FTM3FLT0 field to a new value. */ +#define BW_SIM_SOPT4_FTM3FLT0(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3FLT0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM1CH0SRC[19:18] (RW) + * + * Selects the source for FTM1 channel 0 input capture. When the FTM is not in + * input capture mode, clear this field. + * + * Values: + * - 00 - FTM1_CH0 signal + * - 01 - CMP0 output + * - 10 - CMP1 output + * - 11 - USB start of frame pulse + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM1CH0SRC (18U) /*!< Bit position for SIM_SOPT4_FTM1CH0SRC. */ +#define BM_SIM_SOPT4_FTM1CH0SRC (0x000C0000U) /*!< Bit mask for SIM_SOPT4_FTM1CH0SRC. */ +#define BS_SIM_SOPT4_FTM1CH0SRC (2U) /*!< Bit field size in bits for SIM_SOPT4_FTM1CH0SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM1CH0SRC field. */ +#define BR_SIM_SOPT4_FTM1CH0SRC(x) (HW_SIM_SOPT4(x).B.FTM1CH0SRC) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM1CH0SRC. */ +#define BF_SIM_SOPT4_FTM1CH0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM1CH0SRC) & BM_SIM_SOPT4_FTM1CH0SRC) + +/*! @brief Set the FTM1CH0SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM1CH0SRC(x, v) (HW_SIM_SOPT4_WR(x, (HW_SIM_SOPT4_RD(x) & ~BM_SIM_SOPT4_FTM1CH0SRC) | BF_SIM_SOPT4_FTM1CH0SRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM2CH0SRC[21:20] (RW) + * + * Selects the source for FTM2 channel 0 input capture. When the FTM is not in + * input capture mode, clear this field. + * + * Values: + * - 00 - FTM2_CH0 signal + * - 01 - CMP0 output + * - 10 - CMP1 output + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM2CH0SRC (20U) /*!< Bit position for SIM_SOPT4_FTM2CH0SRC. */ +#define BM_SIM_SOPT4_FTM2CH0SRC (0x00300000U) /*!< Bit mask for SIM_SOPT4_FTM2CH0SRC. */ +#define BS_SIM_SOPT4_FTM2CH0SRC (2U) /*!< Bit field size in bits for SIM_SOPT4_FTM2CH0SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM2CH0SRC field. */ +#define BR_SIM_SOPT4_FTM2CH0SRC(x) (HW_SIM_SOPT4(x).B.FTM2CH0SRC) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM2CH0SRC. */ +#define BF_SIM_SOPT4_FTM2CH0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM2CH0SRC) & BM_SIM_SOPT4_FTM2CH0SRC) + +/*! @brief Set the FTM2CH0SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM2CH0SRC(x, v) (HW_SIM_SOPT4_WR(x, (HW_SIM_SOPT4_RD(x) & ~BM_SIM_SOPT4_FTM2CH0SRC) | BF_SIM_SOPT4_FTM2CH0SRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM2CH1SRC[22] (RW) + * + * Values: + * - 0 - FTM2_CH1 signal + * - 1 - Exclusive OR of FTM2_CH1, FTM2_CH0 and FTM1_CH1. + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM2CH1SRC (22U) /*!< Bit position for SIM_SOPT4_FTM2CH1SRC. */ +#define BM_SIM_SOPT4_FTM2CH1SRC (0x00400000U) /*!< Bit mask for SIM_SOPT4_FTM2CH1SRC. */ +#define BS_SIM_SOPT4_FTM2CH1SRC (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM2CH1SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM2CH1SRC field. */ +#define BR_SIM_SOPT4_FTM2CH1SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2CH1SRC)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM2CH1SRC. */ +#define BF_SIM_SOPT4_FTM2CH1SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM2CH1SRC) & BM_SIM_SOPT4_FTM2CH1SRC) + +/*! @brief Set the FTM2CH1SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM2CH1SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2CH1SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM0CLKSEL[24] (RW) + * + * Selects the external pin used to drive the clock to the FTM0 module. The + * selected pin must also be configured for the FTM external clock function through + * the appropriate pin control register in the port control module. + * + * Values: + * - 0 - FTM_CLK0 pin + * - 1 - FTM_CLK1 pin + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM0CLKSEL (24U) /*!< Bit position for SIM_SOPT4_FTM0CLKSEL. */ +#define BM_SIM_SOPT4_FTM0CLKSEL (0x01000000U) /*!< Bit mask for SIM_SOPT4_FTM0CLKSEL. */ +#define BS_SIM_SOPT4_FTM0CLKSEL (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM0CLKSEL. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM0CLKSEL field. */ +#define BR_SIM_SOPT4_FTM0CLKSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0CLKSEL)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM0CLKSEL. */ +#define BF_SIM_SOPT4_FTM0CLKSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM0CLKSEL) & BM_SIM_SOPT4_FTM0CLKSEL) + +/*! @brief Set the FTM0CLKSEL field to a new value. */ +#define BW_SIM_SOPT4_FTM0CLKSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0CLKSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM1CLKSEL[25] (RW) + * + * Selects the external pin used to drive the clock to the FTM1 module. The + * selected pin must also be configured for the FTM external clock function through + * the appropriate pin control register in the port control module. + * + * Values: + * - 0 - FTM_CLK0 pin + * - 1 - FTM_CLK1 pin + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM1CLKSEL (25U) /*!< Bit position for SIM_SOPT4_FTM1CLKSEL. */ +#define BM_SIM_SOPT4_FTM1CLKSEL (0x02000000U) /*!< Bit mask for SIM_SOPT4_FTM1CLKSEL. */ +#define BS_SIM_SOPT4_FTM1CLKSEL (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM1CLKSEL. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM1CLKSEL field. */ +#define BR_SIM_SOPT4_FTM1CLKSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM1CLKSEL)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM1CLKSEL. */ +#define BF_SIM_SOPT4_FTM1CLKSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM1CLKSEL) & BM_SIM_SOPT4_FTM1CLKSEL) + +/*! @brief Set the FTM1CLKSEL field to a new value. */ +#define BW_SIM_SOPT4_FTM1CLKSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM1CLKSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM2CLKSEL[26] (RW) + * + * Selects the external pin used to drive the clock to the FTM2 module. The + * selected pin must also be configured for the FTM2 module external clock function + * through the appropriate pin control register in the port control module. + * + * Values: + * - 0 - FTM2 external clock driven by FTM_CLK0 pin. + * - 1 - FTM2 external clock driven by FTM_CLK1 pin. + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM2CLKSEL (26U) /*!< Bit position for SIM_SOPT4_FTM2CLKSEL. */ +#define BM_SIM_SOPT4_FTM2CLKSEL (0x04000000U) /*!< Bit mask for SIM_SOPT4_FTM2CLKSEL. */ +#define BS_SIM_SOPT4_FTM2CLKSEL (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM2CLKSEL. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM2CLKSEL field. */ +#define BR_SIM_SOPT4_FTM2CLKSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2CLKSEL)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM2CLKSEL. */ +#define BF_SIM_SOPT4_FTM2CLKSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM2CLKSEL) & BM_SIM_SOPT4_FTM2CLKSEL) + +/*! @brief Set the FTM2CLKSEL field to a new value. */ +#define BW_SIM_SOPT4_FTM2CLKSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM2CLKSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM3CLKSEL[27] (RW) + * + * Selects the external pin used to drive the clock to the FTM3 module. The + * selected pin must also be configured for the FTM3 module external clock function + * through the appropriate pin control register in the port control module. + * + * Values: + * - 0 - FTM3 external clock driven by FTM_CLK0 pin. + * - 1 - FTM3 external clock driven by FTM_CLK1 pin. + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM3CLKSEL (27U) /*!< Bit position for SIM_SOPT4_FTM3CLKSEL. */ +#define BM_SIM_SOPT4_FTM3CLKSEL (0x08000000U) /*!< Bit mask for SIM_SOPT4_FTM3CLKSEL. */ +#define BS_SIM_SOPT4_FTM3CLKSEL (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM3CLKSEL. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM3CLKSEL field. */ +#define BR_SIM_SOPT4_FTM3CLKSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3CLKSEL)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM3CLKSEL. */ +#define BF_SIM_SOPT4_FTM3CLKSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM3CLKSEL) & BM_SIM_SOPT4_FTM3CLKSEL) + +/*! @brief Set the FTM3CLKSEL field to a new value. */ +#define BW_SIM_SOPT4_FTM3CLKSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3CLKSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM0TRG0SRC[28] (RW) + * + * Selects the source of FTM0 hardware trigger 0. + * + * Values: + * - 0 - HSCMP0 output drives FTM0 hardware trigger 0 + * - 1 - FTM1 channel match drives FTM0 hardware trigger 0 + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM0TRG0SRC (28U) /*!< Bit position for SIM_SOPT4_FTM0TRG0SRC. */ +#define BM_SIM_SOPT4_FTM0TRG0SRC (0x10000000U) /*!< Bit mask for SIM_SOPT4_FTM0TRG0SRC. */ +#define BS_SIM_SOPT4_FTM0TRG0SRC (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM0TRG0SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM0TRG0SRC field. */ +#define BR_SIM_SOPT4_FTM0TRG0SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0TRG0SRC)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM0TRG0SRC. */ +#define BF_SIM_SOPT4_FTM0TRG0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM0TRG0SRC) & BM_SIM_SOPT4_FTM0TRG0SRC) + +/*! @brief Set the FTM0TRG0SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM0TRG0SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0TRG0SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM0TRG1SRC[29] (RW) + * + * Selects the source of FTM0 hardware trigger 1. + * + * Values: + * - 0 - PDB output trigger 1 drives FTM0 hardware trigger 1 + * - 1 - FTM2 channel match drives FTM0 hardware trigger 1 + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM0TRG1SRC (29U) /*!< Bit position for SIM_SOPT4_FTM0TRG1SRC. */ +#define BM_SIM_SOPT4_FTM0TRG1SRC (0x20000000U) /*!< Bit mask for SIM_SOPT4_FTM0TRG1SRC. */ +#define BS_SIM_SOPT4_FTM0TRG1SRC (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM0TRG1SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM0TRG1SRC field. */ +#define BR_SIM_SOPT4_FTM0TRG1SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0TRG1SRC)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM0TRG1SRC. */ +#define BF_SIM_SOPT4_FTM0TRG1SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM0TRG1SRC) & BM_SIM_SOPT4_FTM0TRG1SRC) + +/*! @brief Set the FTM0TRG1SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM0TRG1SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM0TRG1SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM3TRG0SRC[30] (RW) + * + * Selects the source of FTM3 hardware trigger 0. + * + * Values: + * - 0 - Reserved + * - 1 - FTM1 channel match drives FTM3 hardware trigger 0 + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM3TRG0SRC (30U) /*!< Bit position for SIM_SOPT4_FTM3TRG0SRC. */ +#define BM_SIM_SOPT4_FTM3TRG0SRC (0x40000000U) /*!< Bit mask for SIM_SOPT4_FTM3TRG0SRC. */ +#define BS_SIM_SOPT4_FTM3TRG0SRC (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM3TRG0SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM3TRG0SRC field. */ +#define BR_SIM_SOPT4_FTM3TRG0SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3TRG0SRC)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM3TRG0SRC. */ +#define BF_SIM_SOPT4_FTM3TRG0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM3TRG0SRC) & BM_SIM_SOPT4_FTM3TRG0SRC) + +/*! @brief Set the FTM3TRG0SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM3TRG0SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3TRG0SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT4, field FTM3TRG1SRC[31] (RW) + * + * Selects the source of FTM3 hardware trigger 1. + * + * Values: + * - 0 - Reserved + * - 1 - FTM2 channel match drives FTM3 hardware trigger 1 + */ +/*@{*/ +#define BP_SIM_SOPT4_FTM3TRG1SRC (31U) /*!< Bit position for SIM_SOPT4_FTM3TRG1SRC. */ +#define BM_SIM_SOPT4_FTM3TRG1SRC (0x80000000U) /*!< Bit mask for SIM_SOPT4_FTM3TRG1SRC. */ +#define BS_SIM_SOPT4_FTM3TRG1SRC (1U) /*!< Bit field size in bits for SIM_SOPT4_FTM3TRG1SRC. */ + +/*! @brief Read current value of the SIM_SOPT4_FTM3TRG1SRC field. */ +#define BR_SIM_SOPT4_FTM3TRG1SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3TRG1SRC)) + +/*! @brief Format value for bitfield SIM_SOPT4_FTM3TRG1SRC. */ +#define BF_SIM_SOPT4_FTM3TRG1SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT4_FTM3TRG1SRC) & BM_SIM_SOPT4_FTM3TRG1SRC) + +/*! @brief Set the FTM3TRG1SRC field to a new value. */ +#define BW_SIM_SOPT4_FTM3TRG1SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT4_ADDR(x), BP_SIM_SOPT4_FTM3TRG1SRC) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT5 - System Options Register 5 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT5 - System Options Register 5 (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_sopt5 +{ + uint32_t U; + struct _hw_sim_sopt5_bitfields + { + uint32_t UART0TXSRC : 2; /*!< [1:0] UART 0 transmit data source + * select */ + uint32_t UART0RXSRC : 2; /*!< [3:2] UART 0 receive data source select + * */ + uint32_t UART1TXSRC : 2; /*!< [5:4] UART 1 transmit data source + * select */ + uint32_t UART1RXSRC : 2; /*!< [7:6] UART 1 receive data source select + * */ + uint32_t RESERVED0 : 10; /*!< [17:8] */ + uint32_t LPUART0RXSRC : 2; /*!< [19:18] LPUART0 receive data source + * select */ + uint32_t RESERVED1 : 12; /*!< [31:20] */ + } B; +} hw_sim_sopt5_t; + +/*! + * @name Constants and macros for entire SIM_SOPT5 register + */ +/*@{*/ +#define HW_SIM_SOPT5_ADDR(x) ((x) + 0x1010U) + +#define HW_SIM_SOPT5(x) (*(__IO hw_sim_sopt5_t *) HW_SIM_SOPT5_ADDR(x)) +#define HW_SIM_SOPT5_RD(x) (HW_SIM_SOPT5(x).U) +#define HW_SIM_SOPT5_WR(x, v) (HW_SIM_SOPT5(x).U = (v)) +#define HW_SIM_SOPT5_SET(x, v) (HW_SIM_SOPT5_WR(x, HW_SIM_SOPT5_RD(x) | (v))) +#define HW_SIM_SOPT5_CLR(x, v) (HW_SIM_SOPT5_WR(x, HW_SIM_SOPT5_RD(x) & ~(v))) +#define HW_SIM_SOPT5_TOG(x, v) (HW_SIM_SOPT5_WR(x, HW_SIM_SOPT5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT5 bitfields + */ + +/*! + * @name Register SIM_SOPT5, field UART0TXSRC[1:0] (RW) + * + * Selects the source for the UART 0 transmit data. + * + * Values: + * - 00 - UART0_TX pin + * - 01 - UART0_TX pin modulated with FTM1 channel 0 output + * - 10 - UART0_TX pin modulated with FTM2 channel 0 output + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT5_UART0TXSRC (0U) /*!< Bit position for SIM_SOPT5_UART0TXSRC. */ +#define BM_SIM_SOPT5_UART0TXSRC (0x00000003U) /*!< Bit mask for SIM_SOPT5_UART0TXSRC. */ +#define BS_SIM_SOPT5_UART0TXSRC (2U) /*!< Bit field size in bits for SIM_SOPT5_UART0TXSRC. */ + +/*! @brief Read current value of the SIM_SOPT5_UART0TXSRC field. */ +#define BR_SIM_SOPT5_UART0TXSRC(x) (HW_SIM_SOPT5(x).B.UART0TXSRC) + +/*! @brief Format value for bitfield SIM_SOPT5_UART0TXSRC. */ +#define BF_SIM_SOPT5_UART0TXSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT5_UART0TXSRC) & BM_SIM_SOPT5_UART0TXSRC) + +/*! @brief Set the UART0TXSRC field to a new value. */ +#define BW_SIM_SOPT5_UART0TXSRC(x, v) (HW_SIM_SOPT5_WR(x, (HW_SIM_SOPT5_RD(x) & ~BM_SIM_SOPT5_UART0TXSRC) | BF_SIM_SOPT5_UART0TXSRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT5, field UART0RXSRC[3:2] (RW) + * + * Selects the source for the UART 0 receive data. + * + * Values: + * - 00 - UART0_RX pin + * - 01 - CMP0 + * - 10 - CMP1 + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT5_UART0RXSRC (2U) /*!< Bit position for SIM_SOPT5_UART0RXSRC. */ +#define BM_SIM_SOPT5_UART0RXSRC (0x0000000CU) /*!< Bit mask for SIM_SOPT5_UART0RXSRC. */ +#define BS_SIM_SOPT5_UART0RXSRC (2U) /*!< Bit field size in bits for SIM_SOPT5_UART0RXSRC. */ + +/*! @brief Read current value of the SIM_SOPT5_UART0RXSRC field. */ +#define BR_SIM_SOPT5_UART0RXSRC(x) (HW_SIM_SOPT5(x).B.UART0RXSRC) + +/*! @brief Format value for bitfield SIM_SOPT5_UART0RXSRC. */ +#define BF_SIM_SOPT5_UART0RXSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT5_UART0RXSRC) & BM_SIM_SOPT5_UART0RXSRC) + +/*! @brief Set the UART0RXSRC field to a new value. */ +#define BW_SIM_SOPT5_UART0RXSRC(x, v) (HW_SIM_SOPT5_WR(x, (HW_SIM_SOPT5_RD(x) & ~BM_SIM_SOPT5_UART0RXSRC) | BF_SIM_SOPT5_UART0RXSRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT5, field UART1TXSRC[5:4] (RW) + * + * Selects the source for the UART 1 transmit data. + * + * Values: + * - 00 - UART1_TX pin + * - 01 - UART1_TX pin modulated with FTM1 channel 0 output + * - 10 - UART1_TX pin modulated with FTM2 channel 0 output + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT5_UART1TXSRC (4U) /*!< Bit position for SIM_SOPT5_UART1TXSRC. */ +#define BM_SIM_SOPT5_UART1TXSRC (0x00000030U) /*!< Bit mask for SIM_SOPT5_UART1TXSRC. */ +#define BS_SIM_SOPT5_UART1TXSRC (2U) /*!< Bit field size in bits for SIM_SOPT5_UART1TXSRC. */ + +/*! @brief Read current value of the SIM_SOPT5_UART1TXSRC field. */ +#define BR_SIM_SOPT5_UART1TXSRC(x) (HW_SIM_SOPT5(x).B.UART1TXSRC) + +/*! @brief Format value for bitfield SIM_SOPT5_UART1TXSRC. */ +#define BF_SIM_SOPT5_UART1TXSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT5_UART1TXSRC) & BM_SIM_SOPT5_UART1TXSRC) + +/*! @brief Set the UART1TXSRC field to a new value. */ +#define BW_SIM_SOPT5_UART1TXSRC(x, v) (HW_SIM_SOPT5_WR(x, (HW_SIM_SOPT5_RD(x) & ~BM_SIM_SOPT5_UART1TXSRC) | BF_SIM_SOPT5_UART1TXSRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT5, field UART1RXSRC[7:6] (RW) + * + * Selects the source for the UART 1 receive data. + * + * Values: + * - 00 - UART1_RX pin + * - 01 - CMP0 + * - 10 - CMP1 + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT5_UART1RXSRC (6U) /*!< Bit position for SIM_SOPT5_UART1RXSRC. */ +#define BM_SIM_SOPT5_UART1RXSRC (0x000000C0U) /*!< Bit mask for SIM_SOPT5_UART1RXSRC. */ +#define BS_SIM_SOPT5_UART1RXSRC (2U) /*!< Bit field size in bits for SIM_SOPT5_UART1RXSRC. */ + +/*! @brief Read current value of the SIM_SOPT5_UART1RXSRC field. */ +#define BR_SIM_SOPT5_UART1RXSRC(x) (HW_SIM_SOPT5(x).B.UART1RXSRC) + +/*! @brief Format value for bitfield SIM_SOPT5_UART1RXSRC. */ +#define BF_SIM_SOPT5_UART1RXSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT5_UART1RXSRC) & BM_SIM_SOPT5_UART1RXSRC) + +/*! @brief Set the UART1RXSRC field to a new value. */ +#define BW_SIM_SOPT5_UART1RXSRC(x, v) (HW_SIM_SOPT5_WR(x, (HW_SIM_SOPT5_RD(x) & ~BM_SIM_SOPT5_UART1RXSRC) | BF_SIM_SOPT5_UART1RXSRC(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT5, field LPUART0RXSRC[19:18] (RW) + * + * Selects the source for the LPUART0 receive data. + * + * Values: + * - 00 - LPUART0_RX pin + * - 01 - CMP0 output + * - 10 - CMP1 output + * - 11 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT5_LPUART0RXSRC (18U) /*!< Bit position for SIM_SOPT5_LPUART0RXSRC. */ +#define BM_SIM_SOPT5_LPUART0RXSRC (0x000C0000U) /*!< Bit mask for SIM_SOPT5_LPUART0RXSRC. */ +#define BS_SIM_SOPT5_LPUART0RXSRC (2U) /*!< Bit field size in bits for SIM_SOPT5_LPUART0RXSRC. */ + +/*! @brief Read current value of the SIM_SOPT5_LPUART0RXSRC field. */ +#define BR_SIM_SOPT5_LPUART0RXSRC(x) (HW_SIM_SOPT5(x).B.LPUART0RXSRC) + +/*! @brief Format value for bitfield SIM_SOPT5_LPUART0RXSRC. */ +#define BF_SIM_SOPT5_LPUART0RXSRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT5_LPUART0RXSRC) & BM_SIM_SOPT5_LPUART0RXSRC) + +/*! @brief Set the LPUART0RXSRC field to a new value. */ +#define BW_SIM_SOPT5_LPUART0RXSRC(x, v) (HW_SIM_SOPT5_WR(x, (HW_SIM_SOPT5_RD(x) & ~BM_SIM_SOPT5_LPUART0RXSRC) | BF_SIM_SOPT5_LPUART0RXSRC(v))) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT7 - System Options Register 7 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT7 - System Options Register 7 (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_sopt7 +{ + uint32_t U; + struct _hw_sim_sopt7_bitfields + { + uint32_t ADC0TRGSEL : 4; /*!< [3:0] ADC0 trigger select */ + uint32_t ADC0PRETRGSEL : 1; /*!< [4] ADC0 pretrigger select */ + uint32_t RESERVED0 : 2; /*!< [6:5] */ + uint32_t ADC0ALTTRGEN : 1; /*!< [7] ADC0 alternate trigger enable */ + uint32_t ADC1TRGSEL : 4; /*!< [11:8] ADC1 trigger select */ + uint32_t ADC1PRETRGSEL : 1; /*!< [12] ADC1 pre-trigger select */ + uint32_t RESERVED1 : 2; /*!< [14:13] */ + uint32_t ADC1ALTTRGEN : 1; /*!< [15] ADC1 alternate trigger enable */ + uint32_t RESERVED2 : 16; /*!< [31:16] */ + } B; +} hw_sim_sopt7_t; + +/*! + * @name Constants and macros for entire SIM_SOPT7 register + */ +/*@{*/ +#define HW_SIM_SOPT7_ADDR(x) ((x) + 0x1018U) + +#define HW_SIM_SOPT7(x) (*(__IO hw_sim_sopt7_t *) HW_SIM_SOPT7_ADDR(x)) +#define HW_SIM_SOPT7_RD(x) (HW_SIM_SOPT7(x).U) +#define HW_SIM_SOPT7_WR(x, v) (HW_SIM_SOPT7(x).U = (v)) +#define HW_SIM_SOPT7_SET(x, v) (HW_SIM_SOPT7_WR(x, HW_SIM_SOPT7_RD(x) | (v))) +#define HW_SIM_SOPT7_CLR(x, v) (HW_SIM_SOPT7_WR(x, HW_SIM_SOPT7_RD(x) & ~(v))) +#define HW_SIM_SOPT7_TOG(x, v) (HW_SIM_SOPT7_WR(x, HW_SIM_SOPT7_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT7 bitfields + */ + +/*! + * @name Register SIM_SOPT7, field ADC0TRGSEL[3:0] (RW) + * + * Selects the ADC0 trigger source when alternative triggers are functional in + * stop and VLPS modes. . + * + * Values: + * - 0000 - PDB external trigger pin input (PDB0_EXTRG) + * - 0001 - High speed comparator 0 output + * - 0010 - High speed comparator 1 output + * - 0011 - Reserved + * - 0100 - PIT trigger 0 + * - 0101 - PIT trigger 1 + * - 0110 - PIT trigger 2 + * - 0111 - PIT trigger 3 + * - 1000 - FTM0 trigger + * - 1001 - FTM1 trigger + * - 1010 - FTM2 trigger + * - 1011 - FTM3 trigger + * - 1100 - RTC alarm + * - 1101 - RTC seconds + * - 1110 - Low-power timer (LPTMR) trigger + * - 1111 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC0TRGSEL (0U) /*!< Bit position for SIM_SOPT7_ADC0TRGSEL. */ +#define BM_SIM_SOPT7_ADC0TRGSEL (0x0000000FU) /*!< Bit mask for SIM_SOPT7_ADC0TRGSEL. */ +#define BS_SIM_SOPT7_ADC0TRGSEL (4U) /*!< Bit field size in bits for SIM_SOPT7_ADC0TRGSEL. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC0TRGSEL field. */ +#define BR_SIM_SOPT7_ADC0TRGSEL(x) (HW_SIM_SOPT7(x).B.ADC0TRGSEL) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC0TRGSEL. */ +#define BF_SIM_SOPT7_ADC0TRGSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC0TRGSEL) & BM_SIM_SOPT7_ADC0TRGSEL) + +/*! @brief Set the ADC0TRGSEL field to a new value. */ +#define BW_SIM_SOPT7_ADC0TRGSEL(x, v) (HW_SIM_SOPT7_WR(x, (HW_SIM_SOPT7_RD(x) & ~BM_SIM_SOPT7_ADC0TRGSEL) | BF_SIM_SOPT7_ADC0TRGSEL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT7, field ADC0PRETRGSEL[4] (RW) + * + * Selects the ADC0 pre-trigger source when alternative triggers are enabled + * through ADC0ALTTRGEN. + * + * Values: + * - 0 - Pre-trigger A + * - 1 - Pre-trigger B + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC0PRETRGSEL (4U) /*!< Bit position for SIM_SOPT7_ADC0PRETRGSEL. */ +#define BM_SIM_SOPT7_ADC0PRETRGSEL (0x00000010U) /*!< Bit mask for SIM_SOPT7_ADC0PRETRGSEL. */ +#define BS_SIM_SOPT7_ADC0PRETRGSEL (1U) /*!< Bit field size in bits for SIM_SOPT7_ADC0PRETRGSEL. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC0PRETRGSEL field. */ +#define BR_SIM_SOPT7_ADC0PRETRGSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC0PRETRGSEL)) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC0PRETRGSEL. */ +#define BF_SIM_SOPT7_ADC0PRETRGSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC0PRETRGSEL) & BM_SIM_SOPT7_ADC0PRETRGSEL) + +/*! @brief Set the ADC0PRETRGSEL field to a new value. */ +#define BW_SIM_SOPT7_ADC0PRETRGSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC0PRETRGSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT7, field ADC0ALTTRGEN[7] (RW) + * + * Enable alternative conversion triggers for ADC0. + * + * Values: + * - 0 - PDB trigger selected for ADC0. + * - 1 - Alternate trigger selected for ADC0. + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC0ALTTRGEN (7U) /*!< Bit position for SIM_SOPT7_ADC0ALTTRGEN. */ +#define BM_SIM_SOPT7_ADC0ALTTRGEN (0x00000080U) /*!< Bit mask for SIM_SOPT7_ADC0ALTTRGEN. */ +#define BS_SIM_SOPT7_ADC0ALTTRGEN (1U) /*!< Bit field size in bits for SIM_SOPT7_ADC0ALTTRGEN. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC0ALTTRGEN field. */ +#define BR_SIM_SOPT7_ADC0ALTTRGEN(x) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC0ALTTRGEN)) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC0ALTTRGEN. */ +#define BF_SIM_SOPT7_ADC0ALTTRGEN(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC0ALTTRGEN) & BM_SIM_SOPT7_ADC0ALTTRGEN) + +/*! @brief Set the ADC0ALTTRGEN field to a new value. */ +#define BW_SIM_SOPT7_ADC0ALTTRGEN(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC0ALTTRGEN) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT7, field ADC1TRGSEL[11:8] (RW) + * + * Selects the ADC1 trigger source when alternative triggers are functional in + * stop and VLPS modes. + * + * Values: + * - 0000 - PDB external trigger pin input (PDB0_EXTRG) + * - 0001 - High speed comparator 0 output + * - 0010 - High speed comparator 1 output + * - 0011 - Reserved + * - 0100 - PIT trigger 0 + * - 0101 - PIT trigger 1 + * - 0110 - PIT trigger 2 + * - 0111 - PIT trigger 3 + * - 1000 - FTM0 trigger + * - 1001 - FTM1 trigger + * - 1010 - FTM2 trigger + * - 1011 - FTM3 trigger + * - 1100 - RTC alarm + * - 1101 - RTC seconds + * - 1110 - Low-power timer (LPTMR) trigger + * - 1111 - Reserved + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC1TRGSEL (8U) /*!< Bit position for SIM_SOPT7_ADC1TRGSEL. */ +#define BM_SIM_SOPT7_ADC1TRGSEL (0x00000F00U) /*!< Bit mask for SIM_SOPT7_ADC1TRGSEL. */ +#define BS_SIM_SOPT7_ADC1TRGSEL (4U) /*!< Bit field size in bits for SIM_SOPT7_ADC1TRGSEL. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC1TRGSEL field. */ +#define BR_SIM_SOPT7_ADC1TRGSEL(x) (HW_SIM_SOPT7(x).B.ADC1TRGSEL) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC1TRGSEL. */ +#define BF_SIM_SOPT7_ADC1TRGSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC1TRGSEL) & BM_SIM_SOPT7_ADC1TRGSEL) + +/*! @brief Set the ADC1TRGSEL field to a new value. */ +#define BW_SIM_SOPT7_ADC1TRGSEL(x, v) (HW_SIM_SOPT7_WR(x, (HW_SIM_SOPT7_RD(x) & ~BM_SIM_SOPT7_ADC1TRGSEL) | BF_SIM_SOPT7_ADC1TRGSEL(v))) +/*@}*/ + +/*! + * @name Register SIM_SOPT7, field ADC1PRETRGSEL[12] (RW) + * + * Selects the ADC1 pre-trigger source when alternative triggers are enabled + * through ADC1ALTTRGEN. + * + * Values: + * - 0 - Pre-trigger A selected for ADC1. + * - 1 - Pre-trigger B selected for ADC1. + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC1PRETRGSEL (12U) /*!< Bit position for SIM_SOPT7_ADC1PRETRGSEL. */ +#define BM_SIM_SOPT7_ADC1PRETRGSEL (0x00001000U) /*!< Bit mask for SIM_SOPT7_ADC1PRETRGSEL. */ +#define BS_SIM_SOPT7_ADC1PRETRGSEL (1U) /*!< Bit field size in bits for SIM_SOPT7_ADC1PRETRGSEL. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC1PRETRGSEL field. */ +#define BR_SIM_SOPT7_ADC1PRETRGSEL(x) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC1PRETRGSEL)) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC1PRETRGSEL. */ +#define BF_SIM_SOPT7_ADC1PRETRGSEL(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC1PRETRGSEL) & BM_SIM_SOPT7_ADC1PRETRGSEL) + +/*! @brief Set the ADC1PRETRGSEL field to a new value. */ +#define BW_SIM_SOPT7_ADC1PRETRGSEL(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC1PRETRGSEL) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT7, field ADC1ALTTRGEN[15] (RW) + * + * Enable alternative conversion triggers for ADC1. + * + * Values: + * - 0 - PDB trigger selected for ADC1 + * - 1 - Alternate trigger selected for ADC1 as defined by ADC1TRGSEL. + */ +/*@{*/ +#define BP_SIM_SOPT7_ADC1ALTTRGEN (15U) /*!< Bit position for SIM_SOPT7_ADC1ALTTRGEN. */ +#define BM_SIM_SOPT7_ADC1ALTTRGEN (0x00008000U) /*!< Bit mask for SIM_SOPT7_ADC1ALTTRGEN. */ +#define BS_SIM_SOPT7_ADC1ALTTRGEN (1U) /*!< Bit field size in bits for SIM_SOPT7_ADC1ALTTRGEN. */ + +/*! @brief Read current value of the SIM_SOPT7_ADC1ALTTRGEN field. */ +#define BR_SIM_SOPT7_ADC1ALTTRGEN(x) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC1ALTTRGEN)) + +/*! @brief Format value for bitfield SIM_SOPT7_ADC1ALTTRGEN. */ +#define BF_SIM_SOPT7_ADC1ALTTRGEN(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT7_ADC1ALTTRGEN) & BM_SIM_SOPT7_ADC1ALTTRGEN) + +/*! @brief Set the ADC1ALTTRGEN field to a new value. */ +#define BW_SIM_SOPT7_ADC1ALTTRGEN(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT7_ADDR(x), BP_SIM_SOPT7_ADC1ALTTRGEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SOPT8 - System Options Register 8 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SOPT8 - System Options Register 8 (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_sopt8 +{ + uint32_t U; + struct _hw_sim_sopt8_bitfields + { + uint32_t FTM0SYNCBIT : 1; /*!< [0] FTM0 Hardware Trigger 0 Software + * Synchronization */ + uint32_t FTM1SYNCBIT : 1; /*!< [1] FTM1 Hardware Trigger 0 Software + * Synchronization */ + uint32_t FTM2SYNCBIT : 1; /*!< [2] FTM2 Hardware Trigger 0 Software + * Synchronization */ + uint32_t FTM3SYNCBIT : 1; /*!< [3] FTM3 Hardware Trigger 0 Software + * Synchronization */ + uint32_t RESERVED0 : 12; /*!< [15:4] */ + uint32_t FTM0OCH0SRC : 1; /*!< [16] FTM0 channel 0 output source */ + uint32_t FTM0OCH1SRC : 1; /*!< [17] FTM0 channel 1 output source */ + uint32_t FTM0OCH2SRC : 1; /*!< [18] FTM0 channel 2 output source */ + uint32_t FTM0OCH3SRC : 1; /*!< [19] FTM0 channel 3 output source */ + uint32_t FTM0OCH4SRC : 1; /*!< [20] FTM0 channel 4 output source */ + uint32_t FTM0OCH5SRC : 1; /*!< [21] FTM0 channel 5 output source */ + uint32_t FTM0OCH6SRC : 1; /*!< [22] FTM0 channel 6 output source */ + uint32_t FTM0OCH7SRC : 1; /*!< [23] FTM0 channel 7 output source */ + uint32_t FTM3OCH0SRC : 1; /*!< [24] FTM3 channel 0 output source */ + uint32_t FTM3OCH1SRC : 1; /*!< [25] FTM3 channel 1 output source */ + uint32_t FTM3OCH2SRC : 1; /*!< [26] FTM3 channel 2 output source */ + uint32_t FTM3OCH3SRC : 1; /*!< [27] FTM3 channel 3 output source */ + uint32_t FTM3OCH4SRC : 1; /*!< [28] FTM3 channel 4 output source */ + uint32_t FTM3OCH5SRC : 1; /*!< [29] FTM3 channel 5 output source */ + uint32_t FTM3OCH6SRC : 1; /*!< [30] FTM3 channel 6 output source */ + uint32_t FTM3OCH7SRC : 1; /*!< [31] FTM3 channel 7 output source */ + } B; +} hw_sim_sopt8_t; + +/*! + * @name Constants and macros for entire SIM_SOPT8 register + */ +/*@{*/ +#define HW_SIM_SOPT8_ADDR(x) ((x) + 0x101CU) + +#define HW_SIM_SOPT8(x) (*(__IO hw_sim_sopt8_t *) HW_SIM_SOPT8_ADDR(x)) +#define HW_SIM_SOPT8_RD(x) (HW_SIM_SOPT8(x).U) +#define HW_SIM_SOPT8_WR(x, v) (HW_SIM_SOPT8(x).U = (v)) +#define HW_SIM_SOPT8_SET(x, v) (HW_SIM_SOPT8_WR(x, HW_SIM_SOPT8_RD(x) | (v))) +#define HW_SIM_SOPT8_CLR(x, v) (HW_SIM_SOPT8_WR(x, HW_SIM_SOPT8_RD(x) & ~(v))) +#define HW_SIM_SOPT8_TOG(x, v) (HW_SIM_SOPT8_WR(x, HW_SIM_SOPT8_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SOPT8 bitfields + */ + +/*! + * @name Register SIM_SOPT8, field FTM0SYNCBIT[0] (RW) + * + * Values: + * - 0 - No effect + * - 1 - Write 1 to assert the TRIG0 input to FTM0, software must clear this bit + * to allow other trigger sources to assert. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0SYNCBIT (0U) /*!< Bit position for SIM_SOPT8_FTM0SYNCBIT. */ +#define BM_SIM_SOPT8_FTM0SYNCBIT (0x00000001U) /*!< Bit mask for SIM_SOPT8_FTM0SYNCBIT. */ +#define BS_SIM_SOPT8_FTM0SYNCBIT (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0SYNCBIT. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0SYNCBIT field. */ +#define BR_SIM_SOPT8_FTM0SYNCBIT(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0SYNCBIT)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0SYNCBIT. */ +#define BF_SIM_SOPT8_FTM0SYNCBIT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0SYNCBIT) & BM_SIM_SOPT8_FTM0SYNCBIT) + +/*! @brief Set the FTM0SYNCBIT field to a new value. */ +#define BW_SIM_SOPT8_FTM0SYNCBIT(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0SYNCBIT) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM1SYNCBIT[1] (RW) + * + * Values: + * - 0 - No effect. + * - 1 - Write 1 to assert the TRIG0 input to FTM1, software must clear this bit + * to allow other trigger sources to assert. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM1SYNCBIT (1U) /*!< Bit position for SIM_SOPT8_FTM1SYNCBIT. */ +#define BM_SIM_SOPT8_FTM1SYNCBIT (0x00000002U) /*!< Bit mask for SIM_SOPT8_FTM1SYNCBIT. */ +#define BS_SIM_SOPT8_FTM1SYNCBIT (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM1SYNCBIT. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM1SYNCBIT field. */ +#define BR_SIM_SOPT8_FTM1SYNCBIT(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM1SYNCBIT)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM1SYNCBIT. */ +#define BF_SIM_SOPT8_FTM1SYNCBIT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM1SYNCBIT) & BM_SIM_SOPT8_FTM1SYNCBIT) + +/*! @brief Set the FTM1SYNCBIT field to a new value. */ +#define BW_SIM_SOPT8_FTM1SYNCBIT(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM1SYNCBIT) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM2SYNCBIT[2] (RW) + * + * Values: + * - 0 - No effect. + * - 1 - Write 1 to assert the TRIG0 input to FTM2, software must clear this bit + * to allow other trigger sources to assert. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM2SYNCBIT (2U) /*!< Bit position for SIM_SOPT8_FTM2SYNCBIT. */ +#define BM_SIM_SOPT8_FTM2SYNCBIT (0x00000004U) /*!< Bit mask for SIM_SOPT8_FTM2SYNCBIT. */ +#define BS_SIM_SOPT8_FTM2SYNCBIT (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM2SYNCBIT. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM2SYNCBIT field. */ +#define BR_SIM_SOPT8_FTM2SYNCBIT(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM2SYNCBIT)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM2SYNCBIT. */ +#define BF_SIM_SOPT8_FTM2SYNCBIT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM2SYNCBIT) & BM_SIM_SOPT8_FTM2SYNCBIT) + +/*! @brief Set the FTM2SYNCBIT field to a new value. */ +#define BW_SIM_SOPT8_FTM2SYNCBIT(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM2SYNCBIT) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3SYNCBIT[3] (RW) + * + * Values: + * - 0 - No effect. + * - 1 - Write 1 to assert the TRIG0 input to FTM3, software must clear this bit + * to allow other trigger sources to assert. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3SYNCBIT (3U) /*!< Bit position for SIM_SOPT8_FTM3SYNCBIT. */ +#define BM_SIM_SOPT8_FTM3SYNCBIT (0x00000008U) /*!< Bit mask for SIM_SOPT8_FTM3SYNCBIT. */ +#define BS_SIM_SOPT8_FTM3SYNCBIT (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3SYNCBIT. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3SYNCBIT field. */ +#define BR_SIM_SOPT8_FTM3SYNCBIT(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3SYNCBIT)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3SYNCBIT. */ +#define BF_SIM_SOPT8_FTM3SYNCBIT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3SYNCBIT) & BM_SIM_SOPT8_FTM3SYNCBIT) + +/*! @brief Set the FTM3SYNCBIT field to a new value. */ +#define BW_SIM_SOPT8_FTM3SYNCBIT(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3SYNCBIT) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH0SRC[16] (RW) + * + * Values: + * - 0 - FTM0_CH0 pin is output of FTM0 channel 0 output + * - 1 - FTM0_CH0 pin is output of FTM0 channel 0 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH0SRC (16U) /*!< Bit position for SIM_SOPT8_FTM0OCH0SRC. */ +#define BM_SIM_SOPT8_FTM0OCH0SRC (0x00010000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH0SRC. */ +#define BS_SIM_SOPT8_FTM0OCH0SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH0SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH0SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH0SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH0SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH0SRC. */ +#define BF_SIM_SOPT8_FTM0OCH0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH0SRC) & BM_SIM_SOPT8_FTM0OCH0SRC) + +/*! @brief Set the FTM0OCH0SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH0SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH0SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH1SRC[17] (RW) + * + * Values: + * - 0 - FTM0_CH1 pin is output of FTM0 channel 1 output + * - 1 - FTM0_CH1 pin is output of FTM0 channel 1 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH1SRC (17U) /*!< Bit position for SIM_SOPT8_FTM0OCH1SRC. */ +#define BM_SIM_SOPT8_FTM0OCH1SRC (0x00020000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH1SRC. */ +#define BS_SIM_SOPT8_FTM0OCH1SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH1SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH1SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH1SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH1SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH1SRC. */ +#define BF_SIM_SOPT8_FTM0OCH1SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH1SRC) & BM_SIM_SOPT8_FTM0OCH1SRC) + +/*! @brief Set the FTM0OCH1SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH1SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH1SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH2SRC[18] (RW) + * + * Values: + * - 0 - FTM0_CH2 pin is output of FTM0 channel 2 output + * - 1 - FTM0_CH2 pin is output of FTM0 channel 2 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH2SRC (18U) /*!< Bit position for SIM_SOPT8_FTM0OCH2SRC. */ +#define BM_SIM_SOPT8_FTM0OCH2SRC (0x00040000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH2SRC. */ +#define BS_SIM_SOPT8_FTM0OCH2SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH2SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH2SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH2SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH2SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH2SRC. */ +#define BF_SIM_SOPT8_FTM0OCH2SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH2SRC) & BM_SIM_SOPT8_FTM0OCH2SRC) + +/*! @brief Set the FTM0OCH2SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH2SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH2SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH3SRC[19] (RW) + * + * Values: + * - 0 - FTM0_CH3 pin is output of FTM0 channel 3 output + * - 1 - FTM0_CH3 pin is output of FTM0 channel 3 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH3SRC (19U) /*!< Bit position for SIM_SOPT8_FTM0OCH3SRC. */ +#define BM_SIM_SOPT8_FTM0OCH3SRC (0x00080000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH3SRC. */ +#define BS_SIM_SOPT8_FTM0OCH3SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH3SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH3SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH3SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH3SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH3SRC. */ +#define BF_SIM_SOPT8_FTM0OCH3SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH3SRC) & BM_SIM_SOPT8_FTM0OCH3SRC) + +/*! @brief Set the FTM0OCH3SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH3SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH3SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH4SRC[20] (RW) + * + * Values: + * - 0 - FTM0_CH4 pin is output of FTM0 channel 4 output + * - 1 - FTM0_CH4 pin is output of FTM0 channel 4 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH4SRC (20U) /*!< Bit position for SIM_SOPT8_FTM0OCH4SRC. */ +#define BM_SIM_SOPT8_FTM0OCH4SRC (0x00100000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH4SRC. */ +#define BS_SIM_SOPT8_FTM0OCH4SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH4SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH4SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH4SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH4SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH4SRC. */ +#define BF_SIM_SOPT8_FTM0OCH4SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH4SRC) & BM_SIM_SOPT8_FTM0OCH4SRC) + +/*! @brief Set the FTM0OCH4SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH4SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH4SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH5SRC[21] (RW) + * + * Values: + * - 0 - FTM0_CH5 pin is output of FTM0 channel 5 output + * - 1 - FTM0_CH5 pin is output of FTM0 channel 5 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH5SRC (21U) /*!< Bit position for SIM_SOPT8_FTM0OCH5SRC. */ +#define BM_SIM_SOPT8_FTM0OCH5SRC (0x00200000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH5SRC. */ +#define BS_SIM_SOPT8_FTM0OCH5SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH5SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH5SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH5SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH5SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH5SRC. */ +#define BF_SIM_SOPT8_FTM0OCH5SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH5SRC) & BM_SIM_SOPT8_FTM0OCH5SRC) + +/*! @brief Set the FTM0OCH5SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH5SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH5SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH6SRC[22] (RW) + * + * Values: + * - 0 - FTM0_CH6 pin is output of FTM0 channel 6 output + * - 1 - FTM0_CH6 pin is output of FTM0 channel 6 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH6SRC (22U) /*!< Bit position for SIM_SOPT8_FTM0OCH6SRC. */ +#define BM_SIM_SOPT8_FTM0OCH6SRC (0x00400000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH6SRC. */ +#define BS_SIM_SOPT8_FTM0OCH6SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH6SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH6SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH6SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH6SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH6SRC. */ +#define BF_SIM_SOPT8_FTM0OCH6SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH6SRC) & BM_SIM_SOPT8_FTM0OCH6SRC) + +/*! @brief Set the FTM0OCH6SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH6SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH6SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM0OCH7SRC[23] (RW) + * + * Values: + * - 0 - FTM0_CH7 pin is output of FTM0 channel 7 output + * - 1 - FTM0_CH7 pin is output of FTM0 channel 7 output, modulated by FTM1 + * channel 1 output + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM0OCH7SRC (23U) /*!< Bit position for SIM_SOPT8_FTM0OCH7SRC. */ +#define BM_SIM_SOPT8_FTM0OCH7SRC (0x00800000U) /*!< Bit mask for SIM_SOPT8_FTM0OCH7SRC. */ +#define BS_SIM_SOPT8_FTM0OCH7SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM0OCH7SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM0OCH7SRC field. */ +#define BR_SIM_SOPT8_FTM0OCH7SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH7SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM0OCH7SRC. */ +#define BF_SIM_SOPT8_FTM0OCH7SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM0OCH7SRC) & BM_SIM_SOPT8_FTM0OCH7SRC) + +/*! @brief Set the FTM0OCH7SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM0OCH7SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM0OCH7SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH0SRC[24] (RW) + * + * Values: + * - 0 - FTM3_CH0 pin is output of FTM3 channel 0 output + * - 1 - FTM3_CH0 pin is output of FTM3 channel 0 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH0SRC (24U) /*!< Bit position for SIM_SOPT8_FTM3OCH0SRC. */ +#define BM_SIM_SOPT8_FTM3OCH0SRC (0x01000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH0SRC. */ +#define BS_SIM_SOPT8_FTM3OCH0SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH0SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH0SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH0SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH0SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH0SRC. */ +#define BF_SIM_SOPT8_FTM3OCH0SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH0SRC) & BM_SIM_SOPT8_FTM3OCH0SRC) + +/*! @brief Set the FTM3OCH0SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH0SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH0SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH1SRC[25] (RW) + * + * Values: + * - 0 - FTM3_CH1 pin is output of FTM3 channel 1 output + * - 1 - FTM3_CH1 pin is output of FTM3 channel 1 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH1SRC (25U) /*!< Bit position for SIM_SOPT8_FTM3OCH1SRC. */ +#define BM_SIM_SOPT8_FTM3OCH1SRC (0x02000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH1SRC. */ +#define BS_SIM_SOPT8_FTM3OCH1SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH1SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH1SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH1SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH1SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH1SRC. */ +#define BF_SIM_SOPT8_FTM3OCH1SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH1SRC) & BM_SIM_SOPT8_FTM3OCH1SRC) + +/*! @brief Set the FTM3OCH1SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH1SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH1SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH2SRC[26] (RW) + * + * Values: + * - 0 - FTM3_CH2 pin is output of FTM3 channel 2 output + * - 1 - FTM3_CH2 pin is output of FTM3 channel 2 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH2SRC (26U) /*!< Bit position for SIM_SOPT8_FTM3OCH2SRC. */ +#define BM_SIM_SOPT8_FTM3OCH2SRC (0x04000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH2SRC. */ +#define BS_SIM_SOPT8_FTM3OCH2SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH2SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH2SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH2SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH2SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH2SRC. */ +#define BF_SIM_SOPT8_FTM3OCH2SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH2SRC) & BM_SIM_SOPT8_FTM3OCH2SRC) + +/*! @brief Set the FTM3OCH2SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH2SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH2SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH3SRC[27] (RW) + * + * Values: + * - 0 - FTM3_CH3 pin is output of FTM3 channel 3 output + * - 1 - FTM3_CH3 pin is output of FTM3 channel 3 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH3SRC (27U) /*!< Bit position for SIM_SOPT8_FTM3OCH3SRC. */ +#define BM_SIM_SOPT8_FTM3OCH3SRC (0x08000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH3SRC. */ +#define BS_SIM_SOPT8_FTM3OCH3SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH3SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH3SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH3SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH3SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH3SRC. */ +#define BF_SIM_SOPT8_FTM3OCH3SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH3SRC) & BM_SIM_SOPT8_FTM3OCH3SRC) + +/*! @brief Set the FTM3OCH3SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH3SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH3SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH4SRC[28] (RW) + * + * Values: + * - 0 - FTM3_CH4 pin is output of FTM3 channel 4 output + * - 1 - FTM3_CH4 pin is output of FTM3 channel 4 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH4SRC (28U) /*!< Bit position for SIM_SOPT8_FTM3OCH4SRC. */ +#define BM_SIM_SOPT8_FTM3OCH4SRC (0x10000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH4SRC. */ +#define BS_SIM_SOPT8_FTM3OCH4SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH4SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH4SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH4SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH4SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH4SRC. */ +#define BF_SIM_SOPT8_FTM3OCH4SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH4SRC) & BM_SIM_SOPT8_FTM3OCH4SRC) + +/*! @brief Set the FTM3OCH4SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH4SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH4SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH5SRC[29] (RW) + * + * Values: + * - 0 - FTM3_CH5 pin is output of FTM3 channel 5 output + * - 1 - FTM3_CH5 pin is output of FTM3 channel 5 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH5SRC (29U) /*!< Bit position for SIM_SOPT8_FTM3OCH5SRC. */ +#define BM_SIM_SOPT8_FTM3OCH5SRC (0x20000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH5SRC. */ +#define BS_SIM_SOPT8_FTM3OCH5SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH5SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH5SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH5SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH5SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH5SRC. */ +#define BF_SIM_SOPT8_FTM3OCH5SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH5SRC) & BM_SIM_SOPT8_FTM3OCH5SRC) + +/*! @brief Set the FTM3OCH5SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH5SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH5SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH6SRC[30] (RW) + * + * Values: + * - 0 - FTM3_CH6 pin is output of FTM3 channel 6 output + * - 1 - FTM3_CH6 pin is output of FTM3 channel 6 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH6SRC (30U) /*!< Bit position for SIM_SOPT8_FTM3OCH6SRC. */ +#define BM_SIM_SOPT8_FTM3OCH6SRC (0x40000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH6SRC. */ +#define BS_SIM_SOPT8_FTM3OCH6SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH6SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH6SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH6SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH6SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH6SRC. */ +#define BF_SIM_SOPT8_FTM3OCH6SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH6SRC) & BM_SIM_SOPT8_FTM3OCH6SRC) + +/*! @brief Set the FTM3OCH6SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH6SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH6SRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SOPT8, field FTM3OCH7SRC[31] (RW) + * + * Values: + * - 0 - FTM3_CH7 pin is output of FTM3 channel 7 output + * - 1 - FTM3_CH7 pin is output of FTM3 channel 7 output modulated by FTM2 + * channel 1 output. + */ +/*@{*/ +#define BP_SIM_SOPT8_FTM3OCH7SRC (31U) /*!< Bit position for SIM_SOPT8_FTM3OCH7SRC. */ +#define BM_SIM_SOPT8_FTM3OCH7SRC (0x80000000U) /*!< Bit mask for SIM_SOPT8_FTM3OCH7SRC. */ +#define BS_SIM_SOPT8_FTM3OCH7SRC (1U) /*!< Bit field size in bits for SIM_SOPT8_FTM3OCH7SRC. */ + +/*! @brief Read current value of the SIM_SOPT8_FTM3OCH7SRC field. */ +#define BR_SIM_SOPT8_FTM3OCH7SRC(x) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH7SRC)) + +/*! @brief Format value for bitfield SIM_SOPT8_FTM3OCH7SRC. */ +#define BF_SIM_SOPT8_FTM3OCH7SRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SOPT8_FTM3OCH7SRC) & BM_SIM_SOPT8_FTM3OCH7SRC) + +/*! @brief Set the FTM3OCH7SRC field to a new value. */ +#define BW_SIM_SOPT8_FTM3OCH7SRC(x, v) (BITBAND_ACCESS32(HW_SIM_SOPT8_ADDR(x), BP_SIM_SOPT8_FTM3OCH7SRC) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SDID - System Device Identification Register + ******************************************************************************/ + +/*! + * @brief HW_SIM_SDID - System Device Identification Register (RO) + * + * Reset value: 0x00000E80U + */ +typedef union _hw_sim_sdid +{ + uint32_t U; + struct _hw_sim_sdid_bitfields + { + uint32_t PINID : 4; /*!< [3:0] Pincount identification */ + uint32_t FAMID : 3; /*!< [6:4] Kinetis family identification */ + uint32_t DIEID : 5; /*!< [11:7] Device Die ID */ + uint32_t REVID : 4; /*!< [15:12] Device revision number */ + uint32_t RESERVED0 : 4; /*!< [19:16] */ + uint32_t SERIESID : 4; /*!< [23:20] Kinetis Series ID */ + uint32_t SUBFAMID : 4; /*!< [27:24] Kinetis Sub-Family ID */ + uint32_t FAMILYID : 4; /*!< [31:28] Kinetis Family ID */ + } B; +} hw_sim_sdid_t; + +/*! + * @name Constants and macros for entire SIM_SDID register + */ +/*@{*/ +#define HW_SIM_SDID_ADDR(x) ((x) + 0x1024U) + +#define HW_SIM_SDID(x) (*(__I hw_sim_sdid_t *) HW_SIM_SDID_ADDR(x)) +#define HW_SIM_SDID_RD(x) (HW_SIM_SDID(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_SDID bitfields + */ + +/*! + * @name Register SIM_SDID, field PINID[3:0] (RO) + * + * Specifies the pincount of the device. + * + * Values: + * - 0000 - Reserved + * - 0001 - Reserved + * - 0010 - 32-pin + * - 0011 - Reserved + * - 0100 - 48-pin + * - 0101 - 64-pin + * - 0110 - 80-pin + * - 0111 - 81-pin or 121-pin + * - 1000 - 100-pin + * - 1001 - 121-pin + * - 1010 - 144-pin + * - 1011 - Custom pinout (WLCSP) + * - 1100 - 169-pin + * - 1101 - Reserved + * - 1110 - 256-pin + * - 1111 - Reserved + */ +/*@{*/ +#define BP_SIM_SDID_PINID (0U) /*!< Bit position for SIM_SDID_PINID. */ +#define BM_SIM_SDID_PINID (0x0000000FU) /*!< Bit mask for SIM_SDID_PINID. */ +#define BS_SIM_SDID_PINID (4U) /*!< Bit field size in bits for SIM_SDID_PINID. */ + +/*! @brief Read current value of the SIM_SDID_PINID field. */ +#define BR_SIM_SDID_PINID(x) (HW_SIM_SDID(x).B.PINID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field FAMID[6:4] (RO) + * + * This field is maintained for compatibility only, but has been superceded by + * the SERIESID, FAMILYID and SUBFAMID fields in this register. + * + * Values: + * - 000 - K1x Family (without tamper) + * - 001 - K2x Family (without tamper) + * - 010 - K3x Family or K1x/K6x Family (with tamper) + * - 011 - K4x Family or K2x Family (with tamper) + * - 100 - K6x Family (without tamper) + * - 101 - K7x Family + * - 110 - Reserved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SIM_SDID_FAMID (4U) /*!< Bit position for SIM_SDID_FAMID. */ +#define BM_SIM_SDID_FAMID (0x00000070U) /*!< Bit mask for SIM_SDID_FAMID. */ +#define BS_SIM_SDID_FAMID (3U) /*!< Bit field size in bits for SIM_SDID_FAMID. */ + +/*! @brief Read current value of the SIM_SDID_FAMID field. */ +#define BR_SIM_SDID_FAMID(x) (HW_SIM_SDID(x).B.FAMID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field DIEID[11:7] (RO) + * + * Specifies the silicon feature set identication number for the device. + */ +/*@{*/ +#define BP_SIM_SDID_DIEID (7U) /*!< Bit position for SIM_SDID_DIEID. */ +#define BM_SIM_SDID_DIEID (0x00000F80U) /*!< Bit mask for SIM_SDID_DIEID. */ +#define BS_SIM_SDID_DIEID (5U) /*!< Bit field size in bits for SIM_SDID_DIEID. */ + +/*! @brief Read current value of the SIM_SDID_DIEID field. */ +#define BR_SIM_SDID_DIEID(x) (HW_SIM_SDID(x).B.DIEID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field REVID[15:12] (RO) + * + * Specifies the silicon implementation number for the device. + */ +/*@{*/ +#define BP_SIM_SDID_REVID (12U) /*!< Bit position for SIM_SDID_REVID. */ +#define BM_SIM_SDID_REVID (0x0000F000U) /*!< Bit mask for SIM_SDID_REVID. */ +#define BS_SIM_SDID_REVID (4U) /*!< Bit field size in bits for SIM_SDID_REVID. */ + +/*! @brief Read current value of the SIM_SDID_REVID field. */ +#define BR_SIM_SDID_REVID(x) (HW_SIM_SDID(x).B.REVID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field SERIESID[23:20] (RO) + * + * Specifies the Kinetis series of the device. + * + * Values: + * - 0000 - Kinetis K series + * - 0001 - Kinetis L series + * - 0101 - Kinetis W series + * - 0110 - Kinetis V series + */ +/*@{*/ +#define BP_SIM_SDID_SERIESID (20U) /*!< Bit position for SIM_SDID_SERIESID. */ +#define BM_SIM_SDID_SERIESID (0x00F00000U) /*!< Bit mask for SIM_SDID_SERIESID. */ +#define BS_SIM_SDID_SERIESID (4U) /*!< Bit field size in bits for SIM_SDID_SERIESID. */ + +/*! @brief Read current value of the SIM_SDID_SERIESID field. */ +#define BR_SIM_SDID_SERIESID(x) (HW_SIM_SDID(x).B.SERIESID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field SUBFAMID[27:24] (RO) + * + * Specifies the Kinetis sub-family of the device. + * + * Values: + * - 0000 - Kx0 Subfamily + * - 0001 - Kx1 Subfamily (tamper detect) + * - 0010 - Kx2 Subfamily + * - 0011 - Kx3 Subfamily (tamper detect) + * - 0100 - Kx4 Subfamily + * - 0101 - Kx5 Subfamily (tamper detect) + * - 0110 - Kx6 Subfamily + */ +/*@{*/ +#define BP_SIM_SDID_SUBFAMID (24U) /*!< Bit position for SIM_SDID_SUBFAMID. */ +#define BM_SIM_SDID_SUBFAMID (0x0F000000U) /*!< Bit mask for SIM_SDID_SUBFAMID. */ +#define BS_SIM_SDID_SUBFAMID (4U) /*!< Bit field size in bits for SIM_SDID_SUBFAMID. */ + +/*! @brief Read current value of the SIM_SDID_SUBFAMID field. */ +#define BR_SIM_SDID_SUBFAMID(x) (HW_SIM_SDID(x).B.SUBFAMID) +/*@}*/ + +/*! + * @name Register SIM_SDID, field FAMILYID[31:28] (RO) + * + * Specifies the Kinetis family of the device. + * + * Values: + * - 0001 - K1x Family + * - 0010 - K2x Family + * - 0011 - K3x Family + * - 0100 - K4x Family + * - 0110 - K6x Family + * - 0111 - K7x Family + */ +/*@{*/ +#define BP_SIM_SDID_FAMILYID (28U) /*!< Bit position for SIM_SDID_FAMILYID. */ +#define BM_SIM_SDID_FAMILYID (0xF0000000U) /*!< Bit mask for SIM_SDID_FAMILYID. */ +#define BS_SIM_SDID_FAMILYID (4U) /*!< Bit field size in bits for SIM_SDID_FAMILYID. */ + +/*! @brief Read current value of the SIM_SDID_FAMILYID field. */ +#define BR_SIM_SDID_FAMILYID(x) (HW_SIM_SDID(x).B.FAMILYID) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SCGC4 - System Clock Gating Control Register 4 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SCGC4 - System Clock Gating Control Register 4 (RW) + * + * Reset value: 0xF0100030U + */ +typedef union _hw_sim_scgc4 +{ + uint32_t U; + struct _hw_sim_scgc4_bitfields + { + uint32_t RESERVED0 : 1; /*!< [0] */ + uint32_t EWMb : 1; /*!< [1] EWM Clock Gate Control */ + uint32_t RESERVED1 : 4; /*!< [5:2] */ + uint32_t I2C0b : 1; /*!< [6] I2C0 Clock Gate Control */ + uint32_t I2C1b : 1; /*!< [7] I2C1 Clock Gate Control */ + uint32_t RESERVED2 : 2; /*!< [9:8] */ + uint32_t UART0b : 1; /*!< [10] UART0 Clock Gate Control */ + uint32_t UART1b : 1; /*!< [11] UART1 Clock Gate Control */ + uint32_t UART2b : 1; /*!< [12] UART2 Clock Gate Control */ + uint32_t RESERVED3 : 5; /*!< [17:13] */ + uint32_t USBOTG : 1; /*!< [18] USB Clock Gate Control */ + uint32_t CMP : 1; /*!< [19] Comparator Clock Gate Control */ + uint32_t VREFb : 1; /*!< [20] VREF Clock Gate Control */ + uint32_t RESERVED4 : 11; /*!< [31:21] */ + } B; +} hw_sim_scgc4_t; + +/*! + * @name Constants and macros for entire SIM_SCGC4 register + */ +/*@{*/ +#define HW_SIM_SCGC4_ADDR(x) ((x) + 0x1034U) + +#define HW_SIM_SCGC4(x) (*(__IO hw_sim_scgc4_t *) HW_SIM_SCGC4_ADDR(x)) +#define HW_SIM_SCGC4_RD(x) (HW_SIM_SCGC4(x).U) +#define HW_SIM_SCGC4_WR(x, v) (HW_SIM_SCGC4(x).U = (v)) +#define HW_SIM_SCGC4_SET(x, v) (HW_SIM_SCGC4_WR(x, HW_SIM_SCGC4_RD(x) | (v))) +#define HW_SIM_SCGC4_CLR(x, v) (HW_SIM_SCGC4_WR(x, HW_SIM_SCGC4_RD(x) & ~(v))) +#define HW_SIM_SCGC4_TOG(x, v) (HW_SIM_SCGC4_WR(x, HW_SIM_SCGC4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SCGC4 bitfields + */ + +/*! + * @name Register SIM_SCGC4, field EWM[1] (RW) + * + * This bit controls the clock gate to the EWM module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_EWM (1U) /*!< Bit position for SIM_SCGC4_EWM. */ +#define BM_SIM_SCGC4_EWM (0x00000002U) /*!< Bit mask for SIM_SCGC4_EWM. */ +#define BS_SIM_SCGC4_EWM (1U) /*!< Bit field size in bits for SIM_SCGC4_EWM. */ + +/*! @brief Read current value of the SIM_SCGC4_EWM field. */ +#define BR_SIM_SCGC4_EWM(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_EWM)) + +/*! @brief Format value for bitfield SIM_SCGC4_EWM. */ +#define BF_SIM_SCGC4_EWM(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_EWM) & BM_SIM_SCGC4_EWM) + +/*! @brief Set the EWM field to a new value. */ +#define BW_SIM_SCGC4_EWM(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_EWM) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field I2C0[6] (RW) + * + * This bit controls the clock gate to the I 2 C0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_I2C0 (6U) /*!< Bit position for SIM_SCGC4_I2C0. */ +#define BM_SIM_SCGC4_I2C0 (0x00000040U) /*!< Bit mask for SIM_SCGC4_I2C0. */ +#define BS_SIM_SCGC4_I2C0 (1U) /*!< Bit field size in bits for SIM_SCGC4_I2C0. */ + +/*! @brief Read current value of the SIM_SCGC4_I2C0 field. */ +#define BR_SIM_SCGC4_I2C0(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_I2C0)) + +/*! @brief Format value for bitfield SIM_SCGC4_I2C0. */ +#define BF_SIM_SCGC4_I2C0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_I2C0) & BM_SIM_SCGC4_I2C0) + +/*! @brief Set the I2C0 field to a new value. */ +#define BW_SIM_SCGC4_I2C0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_I2C0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field I2C1[7] (RW) + * + * This bit controls the clock gate to the I 2 C1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_I2C1 (7U) /*!< Bit position for SIM_SCGC4_I2C1. */ +#define BM_SIM_SCGC4_I2C1 (0x00000080U) /*!< Bit mask for SIM_SCGC4_I2C1. */ +#define BS_SIM_SCGC4_I2C1 (1U) /*!< Bit field size in bits for SIM_SCGC4_I2C1. */ + +/*! @brief Read current value of the SIM_SCGC4_I2C1 field. */ +#define BR_SIM_SCGC4_I2C1(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_I2C1)) + +/*! @brief Format value for bitfield SIM_SCGC4_I2C1. */ +#define BF_SIM_SCGC4_I2C1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_I2C1) & BM_SIM_SCGC4_I2C1) + +/*! @brief Set the I2C1 field to a new value. */ +#define BW_SIM_SCGC4_I2C1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_I2C1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field UART0[10] (RW) + * + * This bit controls the clock gate to the UART0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_UART0 (10U) /*!< Bit position for SIM_SCGC4_UART0. */ +#define BM_SIM_SCGC4_UART0 (0x00000400U) /*!< Bit mask for SIM_SCGC4_UART0. */ +#define BS_SIM_SCGC4_UART0 (1U) /*!< Bit field size in bits for SIM_SCGC4_UART0. */ + +/*! @brief Read current value of the SIM_SCGC4_UART0 field. */ +#define BR_SIM_SCGC4_UART0(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART0)) + +/*! @brief Format value for bitfield SIM_SCGC4_UART0. */ +#define BF_SIM_SCGC4_UART0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_UART0) & BM_SIM_SCGC4_UART0) + +/*! @brief Set the UART0 field to a new value. */ +#define BW_SIM_SCGC4_UART0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field UART1[11] (RW) + * + * This bit controls the clock gate to the UART1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_UART1 (11U) /*!< Bit position for SIM_SCGC4_UART1. */ +#define BM_SIM_SCGC4_UART1 (0x00000800U) /*!< Bit mask for SIM_SCGC4_UART1. */ +#define BS_SIM_SCGC4_UART1 (1U) /*!< Bit field size in bits for SIM_SCGC4_UART1. */ + +/*! @brief Read current value of the SIM_SCGC4_UART1 field. */ +#define BR_SIM_SCGC4_UART1(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART1)) + +/*! @brief Format value for bitfield SIM_SCGC4_UART1. */ +#define BF_SIM_SCGC4_UART1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_UART1) & BM_SIM_SCGC4_UART1) + +/*! @brief Set the UART1 field to a new value. */ +#define BW_SIM_SCGC4_UART1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field UART2[12] (RW) + * + * This bit controls the clock gate to the UART2 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_UART2 (12U) /*!< Bit position for SIM_SCGC4_UART2. */ +#define BM_SIM_SCGC4_UART2 (0x00001000U) /*!< Bit mask for SIM_SCGC4_UART2. */ +#define BS_SIM_SCGC4_UART2 (1U) /*!< Bit field size in bits for SIM_SCGC4_UART2. */ + +/*! @brief Read current value of the SIM_SCGC4_UART2 field. */ +#define BR_SIM_SCGC4_UART2(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART2)) + +/*! @brief Format value for bitfield SIM_SCGC4_UART2. */ +#define BF_SIM_SCGC4_UART2(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_UART2) & BM_SIM_SCGC4_UART2) + +/*! @brief Set the UART2 field to a new value. */ +#define BW_SIM_SCGC4_UART2(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_UART2) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field USBOTG[18] (RW) + * + * This bit controls the clock gate to the USB module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_USBOTG (18U) /*!< Bit position for SIM_SCGC4_USBOTG. */ +#define BM_SIM_SCGC4_USBOTG (0x00040000U) /*!< Bit mask for SIM_SCGC4_USBOTG. */ +#define BS_SIM_SCGC4_USBOTG (1U) /*!< Bit field size in bits for SIM_SCGC4_USBOTG. */ + +/*! @brief Read current value of the SIM_SCGC4_USBOTG field. */ +#define BR_SIM_SCGC4_USBOTG(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_USBOTG)) + +/*! @brief Format value for bitfield SIM_SCGC4_USBOTG. */ +#define BF_SIM_SCGC4_USBOTG(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_USBOTG) & BM_SIM_SCGC4_USBOTG) + +/*! @brief Set the USBOTG field to a new value. */ +#define BW_SIM_SCGC4_USBOTG(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_USBOTG) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field CMP[19] (RW) + * + * This bit controls the clock gate to the comparator module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_CMP (19U) /*!< Bit position for SIM_SCGC4_CMP. */ +#define BM_SIM_SCGC4_CMP (0x00080000U) /*!< Bit mask for SIM_SCGC4_CMP. */ +#define BS_SIM_SCGC4_CMP (1U) /*!< Bit field size in bits for SIM_SCGC4_CMP. */ + +/*! @brief Read current value of the SIM_SCGC4_CMP field. */ +#define BR_SIM_SCGC4_CMP(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_CMP)) + +/*! @brief Format value for bitfield SIM_SCGC4_CMP. */ +#define BF_SIM_SCGC4_CMP(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_CMP) & BM_SIM_SCGC4_CMP) + +/*! @brief Set the CMP field to a new value. */ +#define BW_SIM_SCGC4_CMP(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_CMP) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC4, field VREF[20] (RW) + * + * This bit controls the clock gate to the VREF module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC4_VREF (20U) /*!< Bit position for SIM_SCGC4_VREF. */ +#define BM_SIM_SCGC4_VREF (0x00100000U) /*!< Bit mask for SIM_SCGC4_VREF. */ +#define BS_SIM_SCGC4_VREF (1U) /*!< Bit field size in bits for SIM_SCGC4_VREF. */ + +/*! @brief Read current value of the SIM_SCGC4_VREF field. */ +#define BR_SIM_SCGC4_VREF(x) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_VREF)) + +/*! @brief Format value for bitfield SIM_SCGC4_VREF. */ +#define BF_SIM_SCGC4_VREF(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC4_VREF) & BM_SIM_SCGC4_VREF) + +/*! @brief Set the VREF field to a new value. */ +#define BW_SIM_SCGC4_VREF(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC4_ADDR(x), BP_SIM_SCGC4_VREF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SCGC5 - System Clock Gating Control Register 5 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SCGC5 - System Clock Gating Control Register 5 (RW) + * + * Reset value: 0x00040182U + */ +typedef union _hw_sim_scgc5 +{ + uint32_t U; + struct _hw_sim_scgc5_bitfields + { + uint32_t LPTMR : 1; /*!< [0] Low Power Timer Access Control */ + uint32_t RESERVED0 : 8; /*!< [8:1] */ + uint32_t PORTAb : 1; /*!< [9] Port A Clock Gate Control */ + uint32_t PORTBb : 1; /*!< [10] Port B Clock Gate Control */ + uint32_t PORTCb : 1; /*!< [11] Port C Clock Gate Control */ + uint32_t PORTDb : 1; /*!< [12] Port D Clock Gate Control */ + uint32_t PORTEb : 1; /*!< [13] Port E Clock Gate Control */ + uint32_t RESERVED1 : 18; /*!< [31:14] */ + } B; +} hw_sim_scgc5_t; + +/*! + * @name Constants and macros for entire SIM_SCGC5 register + */ +/*@{*/ +#define HW_SIM_SCGC5_ADDR(x) ((x) + 0x1038U) + +#define HW_SIM_SCGC5(x) (*(__IO hw_sim_scgc5_t *) HW_SIM_SCGC5_ADDR(x)) +#define HW_SIM_SCGC5_RD(x) (HW_SIM_SCGC5(x).U) +#define HW_SIM_SCGC5_WR(x, v) (HW_SIM_SCGC5(x).U = (v)) +#define HW_SIM_SCGC5_SET(x, v) (HW_SIM_SCGC5_WR(x, HW_SIM_SCGC5_RD(x) | (v))) +#define HW_SIM_SCGC5_CLR(x, v) (HW_SIM_SCGC5_WR(x, HW_SIM_SCGC5_RD(x) & ~(v))) +#define HW_SIM_SCGC5_TOG(x, v) (HW_SIM_SCGC5_WR(x, HW_SIM_SCGC5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SCGC5 bitfields + */ + +/*! + * @name Register SIM_SCGC5, field LPTMR[0] (RW) + * + * This bit controls software access to the Low Power Timer module. + * + * Values: + * - 0 - Access disabled + * - 1 - Access enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_LPTMR (0U) /*!< Bit position for SIM_SCGC5_LPTMR. */ +#define BM_SIM_SCGC5_LPTMR (0x00000001U) /*!< Bit mask for SIM_SCGC5_LPTMR. */ +#define BS_SIM_SCGC5_LPTMR (1U) /*!< Bit field size in bits for SIM_SCGC5_LPTMR. */ + +/*! @brief Read current value of the SIM_SCGC5_LPTMR field. */ +#define BR_SIM_SCGC5_LPTMR(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_LPTMR)) + +/*! @brief Format value for bitfield SIM_SCGC5_LPTMR. */ +#define BF_SIM_SCGC5_LPTMR(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_LPTMR) & BM_SIM_SCGC5_LPTMR) + +/*! @brief Set the LPTMR field to a new value. */ +#define BW_SIM_SCGC5_LPTMR(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_LPTMR) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC5, field PORTA[9] (RW) + * + * This bit controls the clock gate to the Port A module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_PORTA (9U) /*!< Bit position for SIM_SCGC5_PORTA. */ +#define BM_SIM_SCGC5_PORTA (0x00000200U) /*!< Bit mask for SIM_SCGC5_PORTA. */ +#define BS_SIM_SCGC5_PORTA (1U) /*!< Bit field size in bits for SIM_SCGC5_PORTA. */ + +/*! @brief Read current value of the SIM_SCGC5_PORTA field. */ +#define BR_SIM_SCGC5_PORTA(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTA)) + +/*! @brief Format value for bitfield SIM_SCGC5_PORTA. */ +#define BF_SIM_SCGC5_PORTA(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_PORTA) & BM_SIM_SCGC5_PORTA) + +/*! @brief Set the PORTA field to a new value. */ +#define BW_SIM_SCGC5_PORTA(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTA) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC5, field PORTB[10] (RW) + * + * This bit controls the clock gate to the Port B module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_PORTB (10U) /*!< Bit position for SIM_SCGC5_PORTB. */ +#define BM_SIM_SCGC5_PORTB (0x00000400U) /*!< Bit mask for SIM_SCGC5_PORTB. */ +#define BS_SIM_SCGC5_PORTB (1U) /*!< Bit field size in bits for SIM_SCGC5_PORTB. */ + +/*! @brief Read current value of the SIM_SCGC5_PORTB field. */ +#define BR_SIM_SCGC5_PORTB(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTB)) + +/*! @brief Format value for bitfield SIM_SCGC5_PORTB. */ +#define BF_SIM_SCGC5_PORTB(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_PORTB) & BM_SIM_SCGC5_PORTB) + +/*! @brief Set the PORTB field to a new value. */ +#define BW_SIM_SCGC5_PORTB(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTB) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC5, field PORTC[11] (RW) + * + * This bit controls the clock gate to the Port C module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_PORTC (11U) /*!< Bit position for SIM_SCGC5_PORTC. */ +#define BM_SIM_SCGC5_PORTC (0x00000800U) /*!< Bit mask for SIM_SCGC5_PORTC. */ +#define BS_SIM_SCGC5_PORTC (1U) /*!< Bit field size in bits for SIM_SCGC5_PORTC. */ + +/*! @brief Read current value of the SIM_SCGC5_PORTC field. */ +#define BR_SIM_SCGC5_PORTC(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTC)) + +/*! @brief Format value for bitfield SIM_SCGC5_PORTC. */ +#define BF_SIM_SCGC5_PORTC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_PORTC) & BM_SIM_SCGC5_PORTC) + +/*! @brief Set the PORTC field to a new value. */ +#define BW_SIM_SCGC5_PORTC(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC5, field PORTD[12] (RW) + * + * This bit controls the clock gate to the Port D module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_PORTD (12U) /*!< Bit position for SIM_SCGC5_PORTD. */ +#define BM_SIM_SCGC5_PORTD (0x00001000U) /*!< Bit mask for SIM_SCGC5_PORTD. */ +#define BS_SIM_SCGC5_PORTD (1U) /*!< Bit field size in bits for SIM_SCGC5_PORTD. */ + +/*! @brief Read current value of the SIM_SCGC5_PORTD field. */ +#define BR_SIM_SCGC5_PORTD(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTD)) + +/*! @brief Format value for bitfield SIM_SCGC5_PORTD. */ +#define BF_SIM_SCGC5_PORTD(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_PORTD) & BM_SIM_SCGC5_PORTD) + +/*! @brief Set the PORTD field to a new value. */ +#define BW_SIM_SCGC5_PORTD(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTD) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC5, field PORTE[13] (RW) + * + * This bit controls the clock gate to the Port E module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC5_PORTE (13U) /*!< Bit position for SIM_SCGC5_PORTE. */ +#define BM_SIM_SCGC5_PORTE (0x00002000U) /*!< Bit mask for SIM_SCGC5_PORTE. */ +#define BS_SIM_SCGC5_PORTE (1U) /*!< Bit field size in bits for SIM_SCGC5_PORTE. */ + +/*! @brief Read current value of the SIM_SCGC5_PORTE field. */ +#define BR_SIM_SCGC5_PORTE(x) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTE)) + +/*! @brief Format value for bitfield SIM_SCGC5_PORTE. */ +#define BF_SIM_SCGC5_PORTE(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC5_PORTE) & BM_SIM_SCGC5_PORTE) + +/*! @brief Set the PORTE field to a new value. */ +#define BW_SIM_SCGC5_PORTE(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC5_ADDR(x), BP_SIM_SCGC5_PORTE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SCGC6 - System Clock Gating Control Register 6 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SCGC6 - System Clock Gating Control Register 6 (RW) + * + * Reset value: 0x40000001U + */ +typedef union _hw_sim_scgc6 +{ + uint32_t U; + struct _hw_sim_scgc6_bitfields + { + uint32_t FTF : 1; /*!< [0] Flash Memory Clock Gate Control */ + uint32_t DMAMUXb : 1; /*!< [1] DMA Mux Clock Gate Control */ + uint32_t RESERVED0 : 4; /*!< [5:2] */ + uint32_t FTM3b : 1; /*!< [6] FTM3 Clock Gate Control */ + uint32_t ADC1b : 1; /*!< [7] ADC1 Clock Gate Control */ + uint32_t DAC1b : 1; /*!< [8] DAC1 Clock Gate Control */ + uint32_t RNGA : 1; /*!< [9] RNGA Clock Gate Control */ + uint32_t LPUART0b : 1; /*!< [10] LPUART0 Clock Gate Control */ + uint32_t RESERVED1 : 1; /*!< [11] */ + uint32_t SPI0b : 1; /*!< [12] SPI0 Clock Gate Control */ + uint32_t SPI1b : 1; /*!< [13] SPI1 Clock Gate Control */ + uint32_t RESERVED2 : 1; /*!< [14] */ + uint32_t I2S : 1; /*!< [15] I2S Clock Gate Control */ + uint32_t RESERVED3 : 2; /*!< [17:16] */ + uint32_t CRC : 1; /*!< [18] CRC Clock Gate Control */ + uint32_t RESERVED4 : 3; /*!< [21:19] */ + uint32_t PDB : 1; /*!< [22] PDB Clock Gate Control */ + uint32_t PITb : 1; /*!< [23] PIT Clock Gate Control */ + uint32_t FTM0b : 1; /*!< [24] FTM0 Clock Gate Control */ + uint32_t FTM1b : 1; /*!< [25] FTM1 Clock Gate Control */ + uint32_t FTM2b : 1; /*!< [26] FTM2 Clock Gate Control */ + uint32_t ADC0b : 1; /*!< [27] ADC0 Clock Gate Control */ + uint32_t RESERVED5 : 1; /*!< [28] */ + uint32_t RTCb : 1; /*!< [29] RTC Access Control */ + uint32_t RESERVED6 : 1; /*!< [30] */ + uint32_t DAC0b : 1; /*!< [31] DAC0 Clock Gate Control */ + } B; +} hw_sim_scgc6_t; + +/*! + * @name Constants and macros for entire SIM_SCGC6 register + */ +/*@{*/ +#define HW_SIM_SCGC6_ADDR(x) ((x) + 0x103CU) + +#define HW_SIM_SCGC6(x) (*(__IO hw_sim_scgc6_t *) HW_SIM_SCGC6_ADDR(x)) +#define HW_SIM_SCGC6_RD(x) (HW_SIM_SCGC6(x).U) +#define HW_SIM_SCGC6_WR(x, v) (HW_SIM_SCGC6(x).U = (v)) +#define HW_SIM_SCGC6_SET(x, v) (HW_SIM_SCGC6_WR(x, HW_SIM_SCGC6_RD(x) | (v))) +#define HW_SIM_SCGC6_CLR(x, v) (HW_SIM_SCGC6_WR(x, HW_SIM_SCGC6_RD(x) & ~(v))) +#define HW_SIM_SCGC6_TOG(x, v) (HW_SIM_SCGC6_WR(x, HW_SIM_SCGC6_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SCGC6 bitfields + */ + +/*! + * @name Register SIM_SCGC6, field FTF[0] (RW) + * + * This bit controls the clock gate to the flash memory. Flash reads are still + * supported while the flash memory is clock gated, but entry into low power modes + * and HSRUN mode is blocked. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_FTF (0U) /*!< Bit position for SIM_SCGC6_FTF. */ +#define BM_SIM_SCGC6_FTF (0x00000001U) /*!< Bit mask for SIM_SCGC6_FTF. */ +#define BS_SIM_SCGC6_FTF (1U) /*!< Bit field size in bits for SIM_SCGC6_FTF. */ + +/*! @brief Read current value of the SIM_SCGC6_FTF field. */ +#define BR_SIM_SCGC6_FTF(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTF)) + +/*! @brief Format value for bitfield SIM_SCGC6_FTF. */ +#define BF_SIM_SCGC6_FTF(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_FTF) & BM_SIM_SCGC6_FTF) + +/*! @brief Set the FTF field to a new value. */ +#define BW_SIM_SCGC6_FTF(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTF) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field DMAMUX[1] (RW) + * + * This bit controls the clock gate to the DMA Mux module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_DMAMUX (1U) /*!< Bit position for SIM_SCGC6_DMAMUX. */ +#define BM_SIM_SCGC6_DMAMUX (0x00000002U) /*!< Bit mask for SIM_SCGC6_DMAMUX. */ +#define BS_SIM_SCGC6_DMAMUX (1U) /*!< Bit field size in bits for SIM_SCGC6_DMAMUX. */ + +/*! @brief Read current value of the SIM_SCGC6_DMAMUX field. */ +#define BR_SIM_SCGC6_DMAMUX(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DMAMUX)) + +/*! @brief Format value for bitfield SIM_SCGC6_DMAMUX. */ +#define BF_SIM_SCGC6_DMAMUX(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_DMAMUX) & BM_SIM_SCGC6_DMAMUX) + +/*! @brief Set the DMAMUX field to a new value. */ +#define BW_SIM_SCGC6_DMAMUX(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DMAMUX) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field FTM3[6] (RW) + * + * This bit controls the clock gate to the FTM3 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_FTM3 (6U) /*!< Bit position for SIM_SCGC6_FTM3. */ +#define BM_SIM_SCGC6_FTM3 (0x00000040U) /*!< Bit mask for SIM_SCGC6_FTM3. */ +#define BS_SIM_SCGC6_FTM3 (1U) /*!< Bit field size in bits for SIM_SCGC6_FTM3. */ + +/*! @brief Read current value of the SIM_SCGC6_FTM3 field. */ +#define BR_SIM_SCGC6_FTM3(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM3)) + +/*! @brief Format value for bitfield SIM_SCGC6_FTM3. */ +#define BF_SIM_SCGC6_FTM3(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_FTM3) & BM_SIM_SCGC6_FTM3) + +/*! @brief Set the FTM3 field to a new value. */ +#define BW_SIM_SCGC6_FTM3(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM3) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field ADC1[7] (RW) + * + * This bit controls the clock gate to the ADC1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_ADC1 (7U) /*!< Bit position for SIM_SCGC6_ADC1. */ +#define BM_SIM_SCGC6_ADC1 (0x00000080U) /*!< Bit mask for SIM_SCGC6_ADC1. */ +#define BS_SIM_SCGC6_ADC1 (1U) /*!< Bit field size in bits for SIM_SCGC6_ADC1. */ + +/*! @brief Read current value of the SIM_SCGC6_ADC1 field. */ +#define BR_SIM_SCGC6_ADC1(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_ADC1)) + +/*! @brief Format value for bitfield SIM_SCGC6_ADC1. */ +#define BF_SIM_SCGC6_ADC1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_ADC1) & BM_SIM_SCGC6_ADC1) + +/*! @brief Set the ADC1 field to a new value. */ +#define BW_SIM_SCGC6_ADC1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_ADC1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field DAC1[8] (RW) + * + * This bit controls the clock gate to the DAC1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_DAC1 (8U) /*!< Bit position for SIM_SCGC6_DAC1. */ +#define BM_SIM_SCGC6_DAC1 (0x00000100U) /*!< Bit mask for SIM_SCGC6_DAC1. */ +#define BS_SIM_SCGC6_DAC1 (1U) /*!< Bit field size in bits for SIM_SCGC6_DAC1. */ + +/*! @brief Read current value of the SIM_SCGC6_DAC1 field. */ +#define BR_SIM_SCGC6_DAC1(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DAC1)) + +/*! @brief Format value for bitfield SIM_SCGC6_DAC1. */ +#define BF_SIM_SCGC6_DAC1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_DAC1) & BM_SIM_SCGC6_DAC1) + +/*! @brief Set the DAC1 field to a new value. */ +#define BW_SIM_SCGC6_DAC1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DAC1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field RNGA[9] (RW) + * + * This bit controls the clock gate to the RNGA module. + */ +/*@{*/ +#define BP_SIM_SCGC6_RNGA (9U) /*!< Bit position for SIM_SCGC6_RNGA. */ +#define BM_SIM_SCGC6_RNGA (0x00000200U) /*!< Bit mask for SIM_SCGC6_RNGA. */ +#define BS_SIM_SCGC6_RNGA (1U) /*!< Bit field size in bits for SIM_SCGC6_RNGA. */ + +/*! @brief Read current value of the SIM_SCGC6_RNGA field. */ +#define BR_SIM_SCGC6_RNGA(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_RNGA)) + +/*! @brief Format value for bitfield SIM_SCGC6_RNGA. */ +#define BF_SIM_SCGC6_RNGA(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_RNGA) & BM_SIM_SCGC6_RNGA) + +/*! @brief Set the RNGA field to a new value. */ +#define BW_SIM_SCGC6_RNGA(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_RNGA) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field LPUART0[10] (RW) + * + * This bit controls the clock gate to the LPUART0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_LPUART0 (10U) /*!< Bit position for SIM_SCGC6_LPUART0. */ +#define BM_SIM_SCGC6_LPUART0 (0x00000400U) /*!< Bit mask for SIM_SCGC6_LPUART0. */ +#define BS_SIM_SCGC6_LPUART0 (1U) /*!< Bit field size in bits for SIM_SCGC6_LPUART0. */ + +/*! @brief Read current value of the SIM_SCGC6_LPUART0 field. */ +#define BR_SIM_SCGC6_LPUART0(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_LPUART0)) + +/*! @brief Format value for bitfield SIM_SCGC6_LPUART0. */ +#define BF_SIM_SCGC6_LPUART0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_LPUART0) & BM_SIM_SCGC6_LPUART0) + +/*! @brief Set the LPUART0 field to a new value. */ +#define BW_SIM_SCGC6_LPUART0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_LPUART0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field SPI0[12] (RW) + * + * This bit controls the clock gate to the SPI0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_SPI0 (12U) /*!< Bit position for SIM_SCGC6_SPI0. */ +#define BM_SIM_SCGC6_SPI0 (0x00001000U) /*!< Bit mask for SIM_SCGC6_SPI0. */ +#define BS_SIM_SCGC6_SPI0 (1U) /*!< Bit field size in bits for SIM_SCGC6_SPI0. */ + +/*! @brief Read current value of the SIM_SCGC6_SPI0 field. */ +#define BR_SIM_SCGC6_SPI0(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_SPI0)) + +/*! @brief Format value for bitfield SIM_SCGC6_SPI0. */ +#define BF_SIM_SCGC6_SPI0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_SPI0) & BM_SIM_SCGC6_SPI0) + +/*! @brief Set the SPI0 field to a new value. */ +#define BW_SIM_SCGC6_SPI0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_SPI0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field SPI1[13] (RW) + * + * This bit controls the clock gate to the SPI1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_SPI1 (13U) /*!< Bit position for SIM_SCGC6_SPI1. */ +#define BM_SIM_SCGC6_SPI1 (0x00002000U) /*!< Bit mask for SIM_SCGC6_SPI1. */ +#define BS_SIM_SCGC6_SPI1 (1U) /*!< Bit field size in bits for SIM_SCGC6_SPI1. */ + +/*! @brief Read current value of the SIM_SCGC6_SPI1 field. */ +#define BR_SIM_SCGC6_SPI1(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_SPI1)) + +/*! @brief Format value for bitfield SIM_SCGC6_SPI1. */ +#define BF_SIM_SCGC6_SPI1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_SPI1) & BM_SIM_SCGC6_SPI1) + +/*! @brief Set the SPI1 field to a new value. */ +#define BW_SIM_SCGC6_SPI1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_SPI1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field I2S[15] (RW) + * + * This bit controls the clock gate to the I 2 S module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_I2S (15U) /*!< Bit position for SIM_SCGC6_I2S. */ +#define BM_SIM_SCGC6_I2S (0x00008000U) /*!< Bit mask for SIM_SCGC6_I2S. */ +#define BS_SIM_SCGC6_I2S (1U) /*!< Bit field size in bits for SIM_SCGC6_I2S. */ + +/*! @brief Read current value of the SIM_SCGC6_I2S field. */ +#define BR_SIM_SCGC6_I2S(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_I2S)) + +/*! @brief Format value for bitfield SIM_SCGC6_I2S. */ +#define BF_SIM_SCGC6_I2S(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_I2S) & BM_SIM_SCGC6_I2S) + +/*! @brief Set the I2S field to a new value. */ +#define BW_SIM_SCGC6_I2S(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_I2S) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field CRC[18] (RW) + * + * This bit controls the clock gate to the CRC module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_CRC (18U) /*!< Bit position for SIM_SCGC6_CRC. */ +#define BM_SIM_SCGC6_CRC (0x00040000U) /*!< Bit mask for SIM_SCGC6_CRC. */ +#define BS_SIM_SCGC6_CRC (1U) /*!< Bit field size in bits for SIM_SCGC6_CRC. */ + +/*! @brief Read current value of the SIM_SCGC6_CRC field. */ +#define BR_SIM_SCGC6_CRC(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_CRC)) + +/*! @brief Format value for bitfield SIM_SCGC6_CRC. */ +#define BF_SIM_SCGC6_CRC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_CRC) & BM_SIM_SCGC6_CRC) + +/*! @brief Set the CRC field to a new value. */ +#define BW_SIM_SCGC6_CRC(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_CRC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field PDB[22] (RW) + * + * This bit controls the clock gate to the PDB module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_PDB (22U) /*!< Bit position for SIM_SCGC6_PDB. */ +#define BM_SIM_SCGC6_PDB (0x00400000U) /*!< Bit mask for SIM_SCGC6_PDB. */ +#define BS_SIM_SCGC6_PDB (1U) /*!< Bit field size in bits for SIM_SCGC6_PDB. */ + +/*! @brief Read current value of the SIM_SCGC6_PDB field. */ +#define BR_SIM_SCGC6_PDB(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_PDB)) + +/*! @brief Format value for bitfield SIM_SCGC6_PDB. */ +#define BF_SIM_SCGC6_PDB(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_PDB) & BM_SIM_SCGC6_PDB) + +/*! @brief Set the PDB field to a new value. */ +#define BW_SIM_SCGC6_PDB(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_PDB) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field PIT[23] (RW) + * + * This bit controls the clock gate to the PIT module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_PIT (23U) /*!< Bit position for SIM_SCGC6_PIT. */ +#define BM_SIM_SCGC6_PIT (0x00800000U) /*!< Bit mask for SIM_SCGC6_PIT. */ +#define BS_SIM_SCGC6_PIT (1U) /*!< Bit field size in bits for SIM_SCGC6_PIT. */ + +/*! @brief Read current value of the SIM_SCGC6_PIT field. */ +#define BR_SIM_SCGC6_PIT(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_PIT)) + +/*! @brief Format value for bitfield SIM_SCGC6_PIT. */ +#define BF_SIM_SCGC6_PIT(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_PIT) & BM_SIM_SCGC6_PIT) + +/*! @brief Set the PIT field to a new value. */ +#define BW_SIM_SCGC6_PIT(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_PIT) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field FTM0[24] (RW) + * + * This bit controls the clock gate to the FTM0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_FTM0 (24U) /*!< Bit position for SIM_SCGC6_FTM0. */ +#define BM_SIM_SCGC6_FTM0 (0x01000000U) /*!< Bit mask for SIM_SCGC6_FTM0. */ +#define BS_SIM_SCGC6_FTM0 (1U) /*!< Bit field size in bits for SIM_SCGC6_FTM0. */ + +/*! @brief Read current value of the SIM_SCGC6_FTM0 field. */ +#define BR_SIM_SCGC6_FTM0(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM0)) + +/*! @brief Format value for bitfield SIM_SCGC6_FTM0. */ +#define BF_SIM_SCGC6_FTM0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_FTM0) & BM_SIM_SCGC6_FTM0) + +/*! @brief Set the FTM0 field to a new value. */ +#define BW_SIM_SCGC6_FTM0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field FTM1[25] (RW) + * + * This bit controls the clock gate to the FTM1 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_FTM1 (25U) /*!< Bit position for SIM_SCGC6_FTM1. */ +#define BM_SIM_SCGC6_FTM1 (0x02000000U) /*!< Bit mask for SIM_SCGC6_FTM1. */ +#define BS_SIM_SCGC6_FTM1 (1U) /*!< Bit field size in bits for SIM_SCGC6_FTM1. */ + +/*! @brief Read current value of the SIM_SCGC6_FTM1 field. */ +#define BR_SIM_SCGC6_FTM1(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM1)) + +/*! @brief Format value for bitfield SIM_SCGC6_FTM1. */ +#define BF_SIM_SCGC6_FTM1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_FTM1) & BM_SIM_SCGC6_FTM1) + +/*! @brief Set the FTM1 field to a new value. */ +#define BW_SIM_SCGC6_FTM1(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM1) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field FTM2[26] (RW) + * + * This bit controls the clock gate to the FTM2 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_FTM2 (26U) /*!< Bit position for SIM_SCGC6_FTM2. */ +#define BM_SIM_SCGC6_FTM2 (0x04000000U) /*!< Bit mask for SIM_SCGC6_FTM2. */ +#define BS_SIM_SCGC6_FTM2 (1U) /*!< Bit field size in bits for SIM_SCGC6_FTM2. */ + +/*! @brief Read current value of the SIM_SCGC6_FTM2 field. */ +#define BR_SIM_SCGC6_FTM2(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM2)) + +/*! @brief Format value for bitfield SIM_SCGC6_FTM2. */ +#define BF_SIM_SCGC6_FTM2(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_FTM2) & BM_SIM_SCGC6_FTM2) + +/*! @brief Set the FTM2 field to a new value. */ +#define BW_SIM_SCGC6_FTM2(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_FTM2) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field ADC0[27] (RW) + * + * This bit controls the clock gate to the ADC0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_ADC0 (27U) /*!< Bit position for SIM_SCGC6_ADC0. */ +#define BM_SIM_SCGC6_ADC0 (0x08000000U) /*!< Bit mask for SIM_SCGC6_ADC0. */ +#define BS_SIM_SCGC6_ADC0 (1U) /*!< Bit field size in bits for SIM_SCGC6_ADC0. */ + +/*! @brief Read current value of the SIM_SCGC6_ADC0 field. */ +#define BR_SIM_SCGC6_ADC0(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_ADC0)) + +/*! @brief Format value for bitfield SIM_SCGC6_ADC0. */ +#define BF_SIM_SCGC6_ADC0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_ADC0) & BM_SIM_SCGC6_ADC0) + +/*! @brief Set the ADC0 field to a new value. */ +#define BW_SIM_SCGC6_ADC0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_ADC0) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field RTC[29] (RW) + * + * This bit controls software access and interrupts to the RTC module. + * + * Values: + * - 0 - Access and interrupts disabled + * - 1 - Access and interrupts enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_RTC (29U) /*!< Bit position for SIM_SCGC6_RTC. */ +#define BM_SIM_SCGC6_RTC (0x20000000U) /*!< Bit mask for SIM_SCGC6_RTC. */ +#define BS_SIM_SCGC6_RTC (1U) /*!< Bit field size in bits for SIM_SCGC6_RTC. */ + +/*! @brief Read current value of the SIM_SCGC6_RTC field. */ +#define BR_SIM_SCGC6_RTC(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_RTC)) + +/*! @brief Format value for bitfield SIM_SCGC6_RTC. */ +#define BF_SIM_SCGC6_RTC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_RTC) & BM_SIM_SCGC6_RTC) + +/*! @brief Set the RTC field to a new value. */ +#define BW_SIM_SCGC6_RTC(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_RTC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC6, field DAC0[31] (RW) + * + * This bit controls the clock gate to the DAC0 module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC6_DAC0 (31U) /*!< Bit position for SIM_SCGC6_DAC0. */ +#define BM_SIM_SCGC6_DAC0 (0x80000000U) /*!< Bit mask for SIM_SCGC6_DAC0. */ +#define BS_SIM_SCGC6_DAC0 (1U) /*!< Bit field size in bits for SIM_SCGC6_DAC0. */ + +/*! @brief Read current value of the SIM_SCGC6_DAC0 field. */ +#define BR_SIM_SCGC6_DAC0(x) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DAC0)) + +/*! @brief Format value for bitfield SIM_SCGC6_DAC0. */ +#define BF_SIM_SCGC6_DAC0(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC6_DAC0) & BM_SIM_SCGC6_DAC0) + +/*! @brief Set the DAC0 field to a new value. */ +#define BW_SIM_SCGC6_DAC0(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC6_ADDR(x), BP_SIM_SCGC6_DAC0) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_SCGC7 - System Clock Gating Control Register 7 + ******************************************************************************/ + +/*! + * @brief HW_SIM_SCGC7 - System Clock Gating Control Register 7 (RW) + * + * Reset value: 0x00000002U + */ +typedef union _hw_sim_scgc7 +{ + uint32_t U; + struct _hw_sim_scgc7_bitfields + { + uint32_t FLEXBUS : 1; /*!< [0] FlexBus Clock Gate Control */ + uint32_t DMA : 1; /*!< [1] DMA Clock Gate Control */ + uint32_t RESERVED0 : 30; /*!< [31:2] */ + } B; +} hw_sim_scgc7_t; + +/*! + * @name Constants and macros for entire SIM_SCGC7 register + */ +/*@{*/ +#define HW_SIM_SCGC7_ADDR(x) ((x) + 0x1040U) + +#define HW_SIM_SCGC7(x) (*(__IO hw_sim_scgc7_t *) HW_SIM_SCGC7_ADDR(x)) +#define HW_SIM_SCGC7_RD(x) (HW_SIM_SCGC7(x).U) +#define HW_SIM_SCGC7_WR(x, v) (HW_SIM_SCGC7(x).U = (v)) +#define HW_SIM_SCGC7_SET(x, v) (HW_SIM_SCGC7_WR(x, HW_SIM_SCGC7_RD(x) | (v))) +#define HW_SIM_SCGC7_CLR(x, v) (HW_SIM_SCGC7_WR(x, HW_SIM_SCGC7_RD(x) & ~(v))) +#define HW_SIM_SCGC7_TOG(x, v) (HW_SIM_SCGC7_WR(x, HW_SIM_SCGC7_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_SCGC7 bitfields + */ + +/*! + * @name Register SIM_SCGC7, field FLEXBUS[0] (RW) + * + * This bit controls the clock gate to the FlexBus module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC7_FLEXBUS (0U) /*!< Bit position for SIM_SCGC7_FLEXBUS. */ +#define BM_SIM_SCGC7_FLEXBUS (0x00000001U) /*!< Bit mask for SIM_SCGC7_FLEXBUS. */ +#define BS_SIM_SCGC7_FLEXBUS (1U) /*!< Bit field size in bits for SIM_SCGC7_FLEXBUS. */ + +/*! @brief Read current value of the SIM_SCGC7_FLEXBUS field. */ +#define BR_SIM_SCGC7_FLEXBUS(x) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR(x), BP_SIM_SCGC7_FLEXBUS)) + +/*! @brief Format value for bitfield SIM_SCGC7_FLEXBUS. */ +#define BF_SIM_SCGC7_FLEXBUS(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC7_FLEXBUS) & BM_SIM_SCGC7_FLEXBUS) + +/*! @brief Set the FLEXBUS field to a new value. */ +#define BW_SIM_SCGC7_FLEXBUS(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR(x), BP_SIM_SCGC7_FLEXBUS) = (v)) +/*@}*/ + +/*! + * @name Register SIM_SCGC7, field DMA[1] (RW) + * + * This bit controls the clock gate to the DMA module. + * + * Values: + * - 0 - Clock disabled + * - 1 - Clock enabled + */ +/*@{*/ +#define BP_SIM_SCGC7_DMA (1U) /*!< Bit position for SIM_SCGC7_DMA. */ +#define BM_SIM_SCGC7_DMA (0x00000002U) /*!< Bit mask for SIM_SCGC7_DMA. */ +#define BS_SIM_SCGC7_DMA (1U) /*!< Bit field size in bits for SIM_SCGC7_DMA. */ + +/*! @brief Read current value of the SIM_SCGC7_DMA field. */ +#define BR_SIM_SCGC7_DMA(x) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR(x), BP_SIM_SCGC7_DMA)) + +/*! @brief Format value for bitfield SIM_SCGC7_DMA. */ +#define BF_SIM_SCGC7_DMA(v) ((uint32_t)((uint32_t)(v) << BP_SIM_SCGC7_DMA) & BM_SIM_SCGC7_DMA) + +/*! @brief Set the DMA field to a new value. */ +#define BW_SIM_SCGC7_DMA(x, v) (BITBAND_ACCESS32(HW_SIM_SCGC7_ADDR(x), BP_SIM_SCGC7_DMA) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SIM_CLKDIV1 - System Clock Divider Register 1 + ******************************************************************************/ + +/*! + * @brief HW_SIM_CLKDIV1 - System Clock Divider Register 1 (RW) + * + * Reset value: 0x00010000U + * + * When updating CLKDIV1, update all fields using the one write command. + * Attempting to write an invalid clock ratio to the CLKDIV1 register will cause the + * write to be ignored. The maximum divide ratio that can be programmed between + * core/system clock and the other divided clocks is divide by 8. When OUTDIV1 equals + * 0000 (divide by 1), the other dividers cannot be set higher than 0111 (divide + * by 8). The CLKDIV1 register cannot be written to when the device is in VLPR + * mode. + */ +typedef union _hw_sim_clkdiv1 +{ + uint32_t U; + struct _hw_sim_clkdiv1_bitfields + { + uint32_t RESERVED0 : 16; /*!< [15:0] */ + uint32_t OUTDIV4 : 4; /*!< [19:16] Clock 4 output divider value */ + uint32_t OUTDIV3 : 4; /*!< [23:20] Clock 3 output divider value */ + uint32_t OUTDIV2 : 4; /*!< [27:24] Clock 2 output divider value */ + uint32_t OUTDIV1 : 4; /*!< [31:28] Clock 1 output divider value */ + } B; +} hw_sim_clkdiv1_t; + +/*! + * @name Constants and macros for entire SIM_CLKDIV1 register + */ +/*@{*/ +#define HW_SIM_CLKDIV1_ADDR(x) ((x) + 0x1044U) + +#define HW_SIM_CLKDIV1(x) (*(__IO hw_sim_clkdiv1_t *) HW_SIM_CLKDIV1_ADDR(x)) +#define HW_SIM_CLKDIV1_RD(x) (HW_SIM_CLKDIV1(x).U) +#define HW_SIM_CLKDIV1_WR(x, v) (HW_SIM_CLKDIV1(x).U = (v)) +#define HW_SIM_CLKDIV1_SET(x, v) (HW_SIM_CLKDIV1_WR(x, HW_SIM_CLKDIV1_RD(x) | (v))) +#define HW_SIM_CLKDIV1_CLR(x, v) (HW_SIM_CLKDIV1_WR(x, HW_SIM_CLKDIV1_RD(x) & ~(v))) +#define HW_SIM_CLKDIV1_TOG(x, v) (HW_SIM_CLKDIV1_WR(x, HW_SIM_CLKDIV1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_CLKDIV1 bitfields + */ + +/*! + * @name Register SIM_CLKDIV1, field OUTDIV4[19:16] (RW) + * + * This field sets the divide value for the flash clock from MCGOUTCLK. At the + * end of reset, it is loaded with either 0001 or 1111 depending on + * FTF_FOPT[LPBOOT]. The flash clock frequency must be an integer divide of the system clock + * frequency. + * + * Values: + * - 0000 - Divide-by-1. + * - 0001 - Divide-by-2. + * - 0010 - Divide-by-3. + * - 0011 - Divide-by-4. + * - 0100 - Divide-by-5. + * - 0101 - Divide-by-6. + * - 0110 - Divide-by-7. + * - 0111 - Divide-by-8. + * - 1000 - Divide-by-9. + * - 1001 - Divide-by-10. + * - 1010 - Divide-by-11. + * - 1011 - Divide-by-12. + * - 1100 - Divide-by-13. + * - 1101 - Divide-by-14. + * - 1110 - Divide-by-15. + * - 1111 - Divide-by-16. + */ +/*@{*/ +#define BP_SIM_CLKDIV1_OUTDIV4 (16U) /*!< Bit position for SIM_CLKDIV1_OUTDIV4. */ +#define BM_SIM_CLKDIV1_OUTDIV4 (0x000F0000U) /*!< Bit mask for SIM_CLKDIV1_OUTDIV4. */ +#define BS_SIM_CLKDIV1_OUTDIV4 (4U) /*!< Bit field size in bits for SIM_CLKDIV1_OUTDIV4. */ + +/*! @brief Read current value of the SIM_CLKDIV1_OUTDIV4 field. */ +#define BR_SIM_CLKDIV1_OUTDIV4(x) (HW_SIM_CLKDIV1(x).B.OUTDIV4) + +/*! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV4. */ +#define BF_SIM_CLKDIV1_OUTDIV4(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV1_OUTDIV4) & BM_SIM_CLKDIV1_OUTDIV4) + +/*! @brief Set the OUTDIV4 field to a new value. */ +#define BW_SIM_CLKDIV1_OUTDIV4(x, v) (HW_SIM_CLKDIV1_WR(x, (HW_SIM_CLKDIV1_RD(x) & ~BM_SIM_CLKDIV1_OUTDIV4) | BF_SIM_CLKDIV1_OUTDIV4(v))) +/*@}*/ + +/*! + * @name Register SIM_CLKDIV1, field OUTDIV3[23:20] (RW) + * + * This field sets the divide value for the FlexBus clock (external pin FB_CLK) + * from MCGOUTCLK. At the end of reset, it is loaded with either 0001 or 1111 + * depending on FTF_FOPT[LPBOOT]. The FlexBus clock frequency must be an integer + * divide of the system clock frequency. + * + * Values: + * - 0000 - Divide-by-1. + * - 0001 - Divide-by-2. + * - 0010 - Divide-by-3. + * - 0011 - Divide-by-4. + * - 0100 - Divide-by-5. + * - 0101 - Divide-by-6. + * - 0110 - Divide-by-7. + * - 0111 - Divide-by-8. + * - 1000 - Divide-by-9. + * - 1001 - Divide-by-10. + * - 1010 - Divide-by-11. + * - 1011 - Divide-by-12. + * - 1100 - Divide-by-13. + * - 1101 - Divide-by-14. + * - 1110 - Divide-by-15. + * - 1111 - Divide-by-16. + */ +/*@{*/ +#define BP_SIM_CLKDIV1_OUTDIV3 (20U) /*!< Bit position for SIM_CLKDIV1_OUTDIV3. */ +#define BM_SIM_CLKDIV1_OUTDIV3 (0x00F00000U) /*!< Bit mask for SIM_CLKDIV1_OUTDIV3. */ +#define BS_SIM_CLKDIV1_OUTDIV3 (4U) /*!< Bit field size in bits for SIM_CLKDIV1_OUTDIV3. */ + +/*! @brief Read current value of the SIM_CLKDIV1_OUTDIV3 field. */ +#define BR_SIM_CLKDIV1_OUTDIV3(x) (HW_SIM_CLKDIV1(x).B.OUTDIV3) + +/*! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV3. */ +#define BF_SIM_CLKDIV1_OUTDIV3(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV1_OUTDIV3) & BM_SIM_CLKDIV1_OUTDIV3) + +/*! @brief Set the OUTDIV3 field to a new value. */ +#define BW_SIM_CLKDIV1_OUTDIV3(x, v) (HW_SIM_CLKDIV1_WR(x, (HW_SIM_CLKDIV1_RD(x) & ~BM_SIM_CLKDIV1_OUTDIV3) | BF_SIM_CLKDIV1_OUTDIV3(v))) +/*@}*/ + +/*! + * @name Register SIM_CLKDIV1, field OUTDIV2[27:24] (RW) + * + * This field sets the divide value for the bus clock from MCGOUTCLK. At the end + * of reset, it is loaded with either 0000 or 0111 depending on + * FTF_FOPT[LPBOOT]. The bus clock frequency must be an integer divide of the core/system clock + * frequency. + * + * Values: + * - 0000 - Divide-by-1. + * - 0001 - Divide-by-2. + * - 0010 - Divide-by-3. + * - 0011 - Divide-by-4. + * - 0100 - Divide-by-5. + * - 0101 - Divide-by-6. + * - 0110 - Divide-by-7. + * - 0111 - Divide-by-8. + * - 1000 - Divide-by-9. + * - 1001 - Divide-by-10. + * - 1010 - Divide-by-11. + * - 1011 - Divide-by-12. + * - 1100 - Divide-by-13. + * - 1101 - Divide-by-14. + * - 1110 - Divide-by-15. + * - 1111 - Divide-by-16. + */ +/*@{*/ +#define BP_SIM_CLKDIV1_OUTDIV2 (24U) /*!< Bit position for SIM_CLKDIV1_OUTDIV2. */ +#define BM_SIM_CLKDIV1_OUTDIV2 (0x0F000000U) /*!< Bit mask for SIM_CLKDIV1_OUTDIV2. */ +#define BS_SIM_CLKDIV1_OUTDIV2 (4U) /*!< Bit field size in bits for SIM_CLKDIV1_OUTDIV2. */ + +/*! @brief Read current value of the SIM_CLKDIV1_OUTDIV2 field. */ +#define BR_SIM_CLKDIV1_OUTDIV2(x) (HW_SIM_CLKDIV1(x).B.OUTDIV2) + +/*! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV2. */ +#define BF_SIM_CLKDIV1_OUTDIV2(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV1_OUTDIV2) & BM_SIM_CLKDIV1_OUTDIV2) + +/*! @brief Set the OUTDIV2 field to a new value. */ +#define BW_SIM_CLKDIV1_OUTDIV2(x, v) (HW_SIM_CLKDIV1_WR(x, (HW_SIM_CLKDIV1_RD(x) & ~BM_SIM_CLKDIV1_OUTDIV2) | BF_SIM_CLKDIV1_OUTDIV2(v))) +/*@}*/ + +/*! + * @name Register SIM_CLKDIV1, field OUTDIV1[31:28] (RW) + * + * This field sets the divide value for the core/system clock from MCGOUTCLK. At + * the end of reset, it is loaded with either 0000 or 0111 depending on + * FTF_FOPT[LPBOOT]. + * + * Values: + * - 0000 - Divide-by-1. + * - 0001 - Divide-by-2. + * - 0010 - Divide-by-3. + * - 0011 - Divide-by-4. + * - 0100 - Divide-by-5. + * - 0101 - Divide-by-6. + * - 0110 - Divide-by-7. + * - 0111 - Divide-by-8. + * - 1000 - Divide-by-9. + * - 1001 - Divide-by-10. + * - 1010 - Divide-by-11. + * - 1011 - Divide-by-12. + * - 1100 - Divide-by-13. + * - 1101 - Divide-by-14. + * - 1110 - Divide-by-15. + * - 1111 - Divide-by-16. + */ +/*@{*/ +#define BP_SIM_CLKDIV1_OUTDIV1 (28U) /*!< Bit position for SIM_CLKDIV1_OUTDIV1. */ +#define BM_SIM_CLKDIV1_OUTDIV1 (0xF0000000U) /*!< Bit mask for SIM_CLKDIV1_OUTDIV1. */ +#define BS_SIM_CLKDIV1_OUTDIV1 (4U) /*!< Bit field size in bits for SIM_CLKDIV1_OUTDIV1. */ + +/*! @brief Read current value of the SIM_CLKDIV1_OUTDIV1 field. */ +#define BR_SIM_CLKDIV1_OUTDIV1(x) (HW_SIM_CLKDIV1(x).B.OUTDIV1) + +/*! @brief Format value for bitfield SIM_CLKDIV1_OUTDIV1. */ +#define BF_SIM_CLKDIV1_OUTDIV1(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV1_OUTDIV1) & BM_SIM_CLKDIV1_OUTDIV1) + +/*! @brief Set the OUTDIV1 field to a new value. */ +#define BW_SIM_CLKDIV1_OUTDIV1(x, v) (HW_SIM_CLKDIV1_WR(x, (HW_SIM_CLKDIV1_RD(x) & ~BM_SIM_CLKDIV1_OUTDIV1) | BF_SIM_CLKDIV1_OUTDIV1(v))) +/*@}*/ + +/******************************************************************************* + * HW_SIM_CLKDIV2 - System Clock Divider Register 2 + ******************************************************************************/ + +/*! + * @brief HW_SIM_CLKDIV2 - System Clock Divider Register 2 (RW) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_clkdiv2 +{ + uint32_t U; + struct _hw_sim_clkdiv2_bitfields + { + uint32_t USBFRAC : 1; /*!< [0] USB clock divider fraction */ + uint32_t USBDIV : 3; /*!< [3:1] USB clock divider divisor */ + uint32_t RESERVED0 : 28; /*!< [31:4] */ + } B; +} hw_sim_clkdiv2_t; + +/*! + * @name Constants and macros for entire SIM_CLKDIV2 register + */ +/*@{*/ +#define HW_SIM_CLKDIV2_ADDR(x) ((x) + 0x1048U) + +#define HW_SIM_CLKDIV2(x) (*(__IO hw_sim_clkdiv2_t *) HW_SIM_CLKDIV2_ADDR(x)) +#define HW_SIM_CLKDIV2_RD(x) (HW_SIM_CLKDIV2(x).U) +#define HW_SIM_CLKDIV2_WR(x, v) (HW_SIM_CLKDIV2(x).U = (v)) +#define HW_SIM_CLKDIV2_SET(x, v) (HW_SIM_CLKDIV2_WR(x, HW_SIM_CLKDIV2_RD(x) | (v))) +#define HW_SIM_CLKDIV2_CLR(x, v) (HW_SIM_CLKDIV2_WR(x, HW_SIM_CLKDIV2_RD(x) & ~(v))) +#define HW_SIM_CLKDIV2_TOG(x, v) (HW_SIM_CLKDIV2_WR(x, HW_SIM_CLKDIV2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_CLKDIV2 bitfields + */ + +/*! + * @name Register SIM_CLKDIV2, field USBFRAC[0] (RW) + * + * This field sets the fraction multiply value for the fractional clock divider + * when the MCGFLLCLK/MCGPLLCLK clock is the USB clock source (SOPT2[USBSRC] = + * 1). Divider output clock = Divider input clock * [ (USBFRAC+1) / (USBDIV+1) ] + */ +/*@{*/ +#define BP_SIM_CLKDIV2_USBFRAC (0U) /*!< Bit position for SIM_CLKDIV2_USBFRAC. */ +#define BM_SIM_CLKDIV2_USBFRAC (0x00000001U) /*!< Bit mask for SIM_CLKDIV2_USBFRAC. */ +#define BS_SIM_CLKDIV2_USBFRAC (1U) /*!< Bit field size in bits for SIM_CLKDIV2_USBFRAC. */ + +/*! @brief Read current value of the SIM_CLKDIV2_USBFRAC field. */ +#define BR_SIM_CLKDIV2_USBFRAC(x) (BITBAND_ACCESS32(HW_SIM_CLKDIV2_ADDR(x), BP_SIM_CLKDIV2_USBFRAC)) + +/*! @brief Format value for bitfield SIM_CLKDIV2_USBFRAC. */ +#define BF_SIM_CLKDIV2_USBFRAC(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV2_USBFRAC) & BM_SIM_CLKDIV2_USBFRAC) + +/*! @brief Set the USBFRAC field to a new value. */ +#define BW_SIM_CLKDIV2_USBFRAC(x, v) (BITBAND_ACCESS32(HW_SIM_CLKDIV2_ADDR(x), BP_SIM_CLKDIV2_USBFRAC) = (v)) +/*@}*/ + +/*! + * @name Register SIM_CLKDIV2, field USBDIV[3:1] (RW) + * + * This field sets the divide value for the fractional clock divider when the + * MCGFLLCLK/MCGPLLCLK clock is the USB clock source (SOPT2[USBSRC] = 1). Divider + * output clock = Divider input clock * [ (USBFRAC+1) / (USBDIV+1) ] + */ +/*@{*/ +#define BP_SIM_CLKDIV2_USBDIV (1U) /*!< Bit position for SIM_CLKDIV2_USBDIV. */ +#define BM_SIM_CLKDIV2_USBDIV (0x0000000EU) /*!< Bit mask for SIM_CLKDIV2_USBDIV. */ +#define BS_SIM_CLKDIV2_USBDIV (3U) /*!< Bit field size in bits for SIM_CLKDIV2_USBDIV. */ + +/*! @brief Read current value of the SIM_CLKDIV2_USBDIV field. */ +#define BR_SIM_CLKDIV2_USBDIV(x) (HW_SIM_CLKDIV2(x).B.USBDIV) + +/*! @brief Format value for bitfield SIM_CLKDIV2_USBDIV. */ +#define BF_SIM_CLKDIV2_USBDIV(v) ((uint32_t)((uint32_t)(v) << BP_SIM_CLKDIV2_USBDIV) & BM_SIM_CLKDIV2_USBDIV) + +/*! @brief Set the USBDIV field to a new value. */ +#define BW_SIM_CLKDIV2_USBDIV(x, v) (HW_SIM_CLKDIV2_WR(x, (HW_SIM_CLKDIV2_RD(x) & ~BM_SIM_CLKDIV2_USBDIV) | BF_SIM_CLKDIV2_USBDIV(v))) +/*@}*/ + +/******************************************************************************* + * HW_SIM_FCFG1 - Flash Configuration Register 1 + ******************************************************************************/ + +/*! + * @brief HW_SIM_FCFG1 - Flash Configuration Register 1 (RW) + * + * Reset value: 0x0F0F0F00U + * + * The EESIZE and DEPART filelds are not applicable. + */ +typedef union _hw_sim_fcfg1 +{ + uint32_t U; + struct _hw_sim_fcfg1_bitfields + { + uint32_t FLASHDIS : 1; /*!< [0] Flash Disable */ + uint32_t FLASHDOZE : 1; /*!< [1] Flash Doze */ + uint32_t RESERVED0 : 22; /*!< [23:2] */ + uint32_t PFSIZE : 4; /*!< [27:24] Program flash size */ + uint32_t RESERVED1 : 4; /*!< [31:28] */ + } B; +} hw_sim_fcfg1_t; + +/*! + * @name Constants and macros for entire SIM_FCFG1 register + */ +/*@{*/ +#define HW_SIM_FCFG1_ADDR(x) ((x) + 0x104CU) + +#define HW_SIM_FCFG1(x) (*(__IO hw_sim_fcfg1_t *) HW_SIM_FCFG1_ADDR(x)) +#define HW_SIM_FCFG1_RD(x) (HW_SIM_FCFG1(x).U) +#define HW_SIM_FCFG1_WR(x, v) (HW_SIM_FCFG1(x).U = (v)) +#define HW_SIM_FCFG1_SET(x, v) (HW_SIM_FCFG1_WR(x, HW_SIM_FCFG1_RD(x) | (v))) +#define HW_SIM_FCFG1_CLR(x, v) (HW_SIM_FCFG1_WR(x, HW_SIM_FCFG1_RD(x) & ~(v))) +#define HW_SIM_FCFG1_TOG(x, v) (HW_SIM_FCFG1_WR(x, HW_SIM_FCFG1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SIM_FCFG1 bitfields + */ + +/*! + * @name Register SIM_FCFG1, field FLASHDIS[0] (RW) + * + * Flash accesses are disabled (and generate a bus error) and the Flash memory + * is placed in a low power state. This bit should not be changed during VLP + * modes. Relocate the interrupt vectors out of Flash memory before disabling the + * Flash. + * + * Values: + * - 0 - Flash is enabled + * - 1 - Flash is disabled + */ +/*@{*/ +#define BP_SIM_FCFG1_FLASHDIS (0U) /*!< Bit position for SIM_FCFG1_FLASHDIS. */ +#define BM_SIM_FCFG1_FLASHDIS (0x00000001U) /*!< Bit mask for SIM_FCFG1_FLASHDIS. */ +#define BS_SIM_FCFG1_FLASHDIS (1U) /*!< Bit field size in bits for SIM_FCFG1_FLASHDIS. */ + +/*! @brief Read current value of the SIM_FCFG1_FLASHDIS field. */ +#define BR_SIM_FCFG1_FLASHDIS(x) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR(x), BP_SIM_FCFG1_FLASHDIS)) + +/*! @brief Format value for bitfield SIM_FCFG1_FLASHDIS. */ +#define BF_SIM_FCFG1_FLASHDIS(v) ((uint32_t)((uint32_t)(v) << BP_SIM_FCFG1_FLASHDIS) & BM_SIM_FCFG1_FLASHDIS) + +/*! @brief Set the FLASHDIS field to a new value. */ +#define BW_SIM_FCFG1_FLASHDIS(x, v) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR(x), BP_SIM_FCFG1_FLASHDIS) = (v)) +/*@}*/ + +/*! + * @name Register SIM_FCFG1, field FLASHDOZE[1] (RW) + * + * When set, Flash memory is disabled for the duration of Wait mode. An attempt + * by the DMA or other bus master to access the Flash when the Flash is disabled + * will result in a bus error. This bit should be clear during VLP modes. The + * Flash will be automatically enabled again at the end of Wait mode so interrupt + * vectors do not need to be relocated out of Flash memory. The wakeup time from + * Wait mode is extended when this bit is set. + * + * Values: + * - 0 - Flash remains enabled during Wait mode + * - 1 - Flash is disabled for the duration of Wait mode + */ +/*@{*/ +#define BP_SIM_FCFG1_FLASHDOZE (1U) /*!< Bit position for SIM_FCFG1_FLASHDOZE. */ +#define BM_SIM_FCFG1_FLASHDOZE (0x00000002U) /*!< Bit mask for SIM_FCFG1_FLASHDOZE. */ +#define BS_SIM_FCFG1_FLASHDOZE (1U) /*!< Bit field size in bits for SIM_FCFG1_FLASHDOZE. */ + +/*! @brief Read current value of the SIM_FCFG1_FLASHDOZE field. */ +#define BR_SIM_FCFG1_FLASHDOZE(x) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR(x), BP_SIM_FCFG1_FLASHDOZE)) + +/*! @brief Format value for bitfield SIM_FCFG1_FLASHDOZE. */ +#define BF_SIM_FCFG1_FLASHDOZE(v) ((uint32_t)((uint32_t)(v) << BP_SIM_FCFG1_FLASHDOZE) & BM_SIM_FCFG1_FLASHDOZE) + +/*! @brief Set the FLASHDOZE field to a new value. */ +#define BW_SIM_FCFG1_FLASHDOZE(x, v) (BITBAND_ACCESS32(HW_SIM_FCFG1_ADDR(x), BP_SIM_FCFG1_FLASHDOZE) = (v)) +/*@}*/ + +/*! + * @name Register SIM_FCFG1, field PFSIZE[27:24] (RO) + * + * This field specifies the amount of program flash memory available on the + * device . Undefined values are reserved. + * + * Values: + * - 0011 - 32 KB of program flash memory + * - 0101 - 64 KB of program flash memory + * - 0111 - 128 KB of program flash memory + * - 1001 - 256 KB of program flash memory + * - 1011 - 512 KB of program flash memory + * - 1101 - 1024 KB of program flash memory + * - 1111 - 512 KB of program flash memory + */ +/*@{*/ +#define BP_SIM_FCFG1_PFSIZE (24U) /*!< Bit position for SIM_FCFG1_PFSIZE. */ +#define BM_SIM_FCFG1_PFSIZE (0x0F000000U) /*!< Bit mask for SIM_FCFG1_PFSIZE. */ +#define BS_SIM_FCFG1_PFSIZE (4U) /*!< Bit field size in bits for SIM_FCFG1_PFSIZE. */ + +/*! @brief Read current value of the SIM_FCFG1_PFSIZE field. */ +#define BR_SIM_FCFG1_PFSIZE(x) (HW_SIM_FCFG1(x).B.PFSIZE) +/*@}*/ + +/******************************************************************************* + * HW_SIM_FCFG2 - Flash Configuration Register 2 + ******************************************************************************/ + +/*! + * @brief HW_SIM_FCFG2 - Flash Configuration Register 2 (RO) + * + * Reset value: 0x7FFF0000U + */ +typedef union _hw_sim_fcfg2 +{ + uint32_t U; + struct _hw_sim_fcfg2_bitfields + { + uint32_t RESERVED0 : 16; /*!< [15:0] */ + uint32_t MAXADDR1 : 7; /*!< [22:16] Max address block 1 */ + uint32_t RESERVED1 : 1; /*!< [23] */ + uint32_t MAXADDR0 : 7; /*!< [30:24] Max address block 0 */ + uint32_t RESERVED2 : 1; /*!< [31] */ + } B; +} hw_sim_fcfg2_t; + +/*! + * @name Constants and macros for entire SIM_FCFG2 register + */ +/*@{*/ +#define HW_SIM_FCFG2_ADDR(x) ((x) + 0x1050U) + +#define HW_SIM_FCFG2(x) (*(__I hw_sim_fcfg2_t *) HW_SIM_FCFG2_ADDR(x)) +#define HW_SIM_FCFG2_RD(x) (HW_SIM_FCFG2(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_FCFG2 bitfields + */ + +/*! + * @name Register SIM_FCFG2, field MAXADDR1[22:16] (RO) + * + * This field equals zero if there is only one program flash block, otherwise it + * equals the value of the MAXADDR0 field. For example, with MAXADDR0 = MAXADDR1 + * = 0x20 the first invalid address of flash block 1 is 0x4_0000 + 0x4_0000. + * This would be the MAXADDR1 value for a device with 512 KB program flash memory + * across two flash blocks and no FlexNVM. + */ +/*@{*/ +#define BP_SIM_FCFG2_MAXADDR1 (16U) /*!< Bit position for SIM_FCFG2_MAXADDR1. */ +#define BM_SIM_FCFG2_MAXADDR1 (0x007F0000U) /*!< Bit mask for SIM_FCFG2_MAXADDR1. */ +#define BS_SIM_FCFG2_MAXADDR1 (7U) /*!< Bit field size in bits for SIM_FCFG2_MAXADDR1. */ + +/*! @brief Read current value of the SIM_FCFG2_MAXADDR1 field. */ +#define BR_SIM_FCFG2_MAXADDR1(x) (HW_SIM_FCFG2(x).B.MAXADDR1) +/*@}*/ + +/*! + * @name Register SIM_FCFG2, field MAXADDR0[30:24] (RO) + * + * This field concatenated with 13 trailing zeros indicates the first invalid + * address of each program flash block. For example, if MAXADDR0 = 0x20 the first + * invalid address of flash block 0 is 0x0004_0000. This would be the MAXADDR0 + * value for a device with 256 KB program flash in flash block 0. + */ +/*@{*/ +#define BP_SIM_FCFG2_MAXADDR0 (24U) /*!< Bit position for SIM_FCFG2_MAXADDR0. */ +#define BM_SIM_FCFG2_MAXADDR0 (0x7F000000U) /*!< Bit mask for SIM_FCFG2_MAXADDR0. */ +#define BS_SIM_FCFG2_MAXADDR0 (7U) /*!< Bit field size in bits for SIM_FCFG2_MAXADDR0. */ + +/*! @brief Read current value of the SIM_FCFG2_MAXADDR0 field. */ +#define BR_SIM_FCFG2_MAXADDR0(x) (HW_SIM_FCFG2(x).B.MAXADDR0) +/*@}*/ + +/******************************************************************************* + * HW_SIM_UIDH - Unique Identification Register High + ******************************************************************************/ + +/*! + * @brief HW_SIM_UIDH - Unique Identification Register High (RO) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_uidh +{ + uint32_t U; + struct _hw_sim_uidh_bitfields + { + uint32_t UID : 32; /*!< [31:0] Unique Identification */ + } B; +} hw_sim_uidh_t; + +/*! + * @name Constants and macros for entire SIM_UIDH register + */ +/*@{*/ +#define HW_SIM_UIDH_ADDR(x) ((x) + 0x1054U) + +#define HW_SIM_UIDH(x) (*(__I hw_sim_uidh_t *) HW_SIM_UIDH_ADDR(x)) +#define HW_SIM_UIDH_RD(x) (HW_SIM_UIDH(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_UIDH bitfields + */ + +/*! + * @name Register SIM_UIDH, field UID[31:0] (RO) + * + * Unique identification for the device. + */ +/*@{*/ +#define BP_SIM_UIDH_UID (0U) /*!< Bit position for SIM_UIDH_UID. */ +#define BM_SIM_UIDH_UID (0xFFFFFFFFU) /*!< Bit mask for SIM_UIDH_UID. */ +#define BS_SIM_UIDH_UID (32U) /*!< Bit field size in bits for SIM_UIDH_UID. */ + +/*! @brief Read current value of the SIM_UIDH_UID field. */ +#define BR_SIM_UIDH_UID(x) (HW_SIM_UIDH(x).U) +/*@}*/ + +/******************************************************************************* + * HW_SIM_UIDMH - Unique Identification Register Mid-High + ******************************************************************************/ + +/*! + * @brief HW_SIM_UIDMH - Unique Identification Register Mid-High (RO) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_uidmh +{ + uint32_t U; + struct _hw_sim_uidmh_bitfields + { + uint32_t UID : 32; /*!< [31:0] Unique Identification */ + } B; +} hw_sim_uidmh_t; + +/*! + * @name Constants and macros for entire SIM_UIDMH register + */ +/*@{*/ +#define HW_SIM_UIDMH_ADDR(x) ((x) + 0x1058U) + +#define HW_SIM_UIDMH(x) (*(__I hw_sim_uidmh_t *) HW_SIM_UIDMH_ADDR(x)) +#define HW_SIM_UIDMH_RD(x) (HW_SIM_UIDMH(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_UIDMH bitfields + */ + +/*! + * @name Register SIM_UIDMH, field UID[31:0] (RO) + * + * Unique identification for the device. + */ +/*@{*/ +#define BP_SIM_UIDMH_UID (0U) /*!< Bit position for SIM_UIDMH_UID. */ +#define BM_SIM_UIDMH_UID (0xFFFFFFFFU) /*!< Bit mask for SIM_UIDMH_UID. */ +#define BS_SIM_UIDMH_UID (32U) /*!< Bit field size in bits for SIM_UIDMH_UID. */ + +/*! @brief Read current value of the SIM_UIDMH_UID field. */ +#define BR_SIM_UIDMH_UID(x) (HW_SIM_UIDMH(x).U) +/*@}*/ + +/******************************************************************************* + * HW_SIM_UIDML - Unique Identification Register Mid Low + ******************************************************************************/ + +/*! + * @brief HW_SIM_UIDML - Unique Identification Register Mid Low (RO) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_uidml +{ + uint32_t U; + struct _hw_sim_uidml_bitfields + { + uint32_t UID : 32; /*!< [31:0] Unique Identification */ + } B; +} hw_sim_uidml_t; + +/*! + * @name Constants and macros for entire SIM_UIDML register + */ +/*@{*/ +#define HW_SIM_UIDML_ADDR(x) ((x) + 0x105CU) + +#define HW_SIM_UIDML(x) (*(__I hw_sim_uidml_t *) HW_SIM_UIDML_ADDR(x)) +#define HW_SIM_UIDML_RD(x) (HW_SIM_UIDML(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_UIDML bitfields + */ + +/*! + * @name Register SIM_UIDML, field UID[31:0] (RO) + * + * Unique identification for the device. + */ +/*@{*/ +#define BP_SIM_UIDML_UID (0U) /*!< Bit position for SIM_UIDML_UID. */ +#define BM_SIM_UIDML_UID (0xFFFFFFFFU) /*!< Bit mask for SIM_UIDML_UID. */ +#define BS_SIM_UIDML_UID (32U) /*!< Bit field size in bits for SIM_UIDML_UID. */ + +/*! @brief Read current value of the SIM_UIDML_UID field. */ +#define BR_SIM_UIDML_UID(x) (HW_SIM_UIDML(x).U) +/*@}*/ + +/******************************************************************************* + * HW_SIM_UIDL - Unique Identification Register Low + ******************************************************************************/ + +/*! + * @brief HW_SIM_UIDL - Unique Identification Register Low (RO) + * + * Reset value: 0x00000000U + */ +typedef union _hw_sim_uidl +{ + uint32_t U; + struct _hw_sim_uidl_bitfields + { + uint32_t UID : 32; /*!< [31:0] Unique Identification */ + } B; +} hw_sim_uidl_t; + +/*! + * @name Constants and macros for entire SIM_UIDL register + */ +/*@{*/ +#define HW_SIM_UIDL_ADDR(x) ((x) + 0x1060U) + +#define HW_SIM_UIDL(x) (*(__I hw_sim_uidl_t *) HW_SIM_UIDL_ADDR(x)) +#define HW_SIM_UIDL_RD(x) (HW_SIM_UIDL(x).U) +/*@}*/ + +/* + * Constants & macros for individual SIM_UIDL bitfields + */ + +/*! + * @name Register SIM_UIDL, field UID[31:0] (RO) + * + * Unique identification for the device. + */ +/*@{*/ +#define BP_SIM_UIDL_UID (0U) /*!< Bit position for SIM_UIDL_UID. */ +#define BM_SIM_UIDL_UID (0xFFFFFFFFU) /*!< Bit mask for SIM_UIDL_UID. */ +#define BS_SIM_UIDL_UID (32U) /*!< Bit field size in bits for SIM_UIDL_UID. */ + +/*! @brief Read current value of the SIM_UIDL_UID field. */ +#define BR_SIM_UIDL_UID(x) (HW_SIM_UIDL(x).U) +/*@}*/ + +/******************************************************************************* + * hw_sim_t - module struct + ******************************************************************************/ +/*! + * @brief All SIM module registers. + */ +#pragma pack(1) +typedef struct _hw_sim +{ + __IO hw_sim_sopt1_t SOPT1; /*!< [0x0] System Options Register 1 */ + __IO hw_sim_sopt1cfg_t SOPT1CFG; /*!< [0x4] SOPT1 Configuration Register */ + uint8_t _reserved0[4092]; + __IO hw_sim_sopt2_t SOPT2; /*!< [0x1004] System Options Register 2 */ + uint8_t _reserved1[4]; + __IO hw_sim_sopt4_t SOPT4; /*!< [0x100C] System Options Register 4 */ + __IO hw_sim_sopt5_t SOPT5; /*!< [0x1010] System Options Register 5 */ + uint8_t _reserved2[4]; + __IO hw_sim_sopt7_t SOPT7; /*!< [0x1018] System Options Register 7 */ + __IO hw_sim_sopt8_t SOPT8; /*!< [0x101C] System Options Register 8 */ + uint8_t _reserved3[4]; + __I hw_sim_sdid_t SDID; /*!< [0x1024] System Device Identification Register */ + uint8_t _reserved4[12]; + __IO hw_sim_scgc4_t SCGC4; /*!< [0x1034] System Clock Gating Control Register 4 */ + __IO hw_sim_scgc5_t SCGC5; /*!< [0x1038] System Clock Gating Control Register 5 */ + __IO hw_sim_scgc6_t SCGC6; /*!< [0x103C] System Clock Gating Control Register 6 */ + __IO hw_sim_scgc7_t SCGC7; /*!< [0x1040] System Clock Gating Control Register 7 */ + __IO hw_sim_clkdiv1_t CLKDIV1; /*!< [0x1044] System Clock Divider Register 1 */ + __IO hw_sim_clkdiv2_t CLKDIV2; /*!< [0x1048] System Clock Divider Register 2 */ + __IO hw_sim_fcfg1_t FCFG1; /*!< [0x104C] Flash Configuration Register 1 */ + __I hw_sim_fcfg2_t FCFG2; /*!< [0x1050] Flash Configuration Register 2 */ + __I hw_sim_uidh_t UIDH; /*!< [0x1054] Unique Identification Register High */ + __I hw_sim_uidmh_t UIDMH; /*!< [0x1058] Unique Identification Register Mid-High */ + __I hw_sim_uidml_t UIDML; /*!< [0x105C] Unique Identification Register Mid Low */ + __I hw_sim_uidl_t UIDL; /*!< [0x1060] Unique Identification Register Low */ +} hw_sim_t; +#pragma pack() + +/*! @brief Macro to access all SIM registers. */ +/*! @param x SIM module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_SIM(SIM_BASE)</code>. */ +#define HW_SIM(x) (*(hw_sim_t *)(x)) + +#endif /* __HW_SIM_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_smc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_smc.h new file mode 100644 index 0000000000..b18565b003 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_smc.h @@ -0,0 +1,597 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_SMC_REGISTERS_H__ +#define __HW_SMC_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 SMC + * + * System Mode Controller + * + * Registers defined in this header file: + * - HW_SMC_PMPROT - Power Mode Protection register + * - HW_SMC_PMCTRL - Power Mode Control register + * - HW_SMC_STOPCTRL - Stop Control Register + * - HW_SMC_PMSTAT - Power Mode Status register + * + * - hw_smc_t - Struct containing all module registers. + */ + +#define HW_SMC_INSTANCE_COUNT (1U) /*!< Number of instances of the SMC module. */ + +/******************************************************************************* + * HW_SMC_PMPROT - Power Mode Protection register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMPROT - Power Mode Protection register (RW) + * + * Reset value: 0x00U + * + * This register provides protection for entry into any low-power run or stop + * mode. The enabling of the low-power run or stop mode occurs by configuring the + * Power Mode Control register (PMCTRL). The PMPROT register can be written only + * once after any system reset. If the MCU is configured for a disallowed or + * reserved power mode, the MCU remains in its current power mode. For example, if the + * MCU is in normal RUN mode and AVLP is 0, an attempt to enter VLPR mode using + * PMCTRL[RUNM] is blocked and PMCTRL[RUNM] remains 00b, indicating the MCU is + * still in Normal Run mode. This register is reset on Chip Reset not VLLS and by + * reset types that trigger Chip Reset not VLLS. It is unaffected by reset types + * that do not trigger Chip Reset not VLLS. See the Reset section details for more + * information. + */ +typedef union _hw_smc_pmprot +{ + uint8_t U; + struct _hw_smc_pmprot_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t AVLLS : 1; /*!< [1] Allow Very-Low-Leakage Stop Mode */ + uint8_t RESERVED1 : 1; /*!< [2] */ + uint8_t ALLS : 1; /*!< [3] Allow Low-Leakage Stop Mode */ + uint8_t RESERVED2 : 1; /*!< [4] */ + uint8_t AVLP : 1; /*!< [5] Allow Very-Low-Power Modes */ + uint8_t RESERVED3 : 1; /*!< [6] */ + uint8_t AHSRUN : 1; /*!< [7] Allow High Speed Run mode */ + } B; +} hw_smc_pmprot_t; + +/*! + * @name Constants and macros for entire SMC_PMPROT register + */ +/*@{*/ +#define HW_SMC_PMPROT_ADDR(x) ((x) + 0x0U) + +#define HW_SMC_PMPROT(x) (*(__IO hw_smc_pmprot_t *) HW_SMC_PMPROT_ADDR(x)) +#define HW_SMC_PMPROT_RD(x) (HW_SMC_PMPROT(x).U) +#define HW_SMC_PMPROT_WR(x, v) (HW_SMC_PMPROT(x).U = (v)) +#define HW_SMC_PMPROT_SET(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) | (v))) +#define HW_SMC_PMPROT_CLR(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) & ~(v))) +#define HW_SMC_PMPROT_TOG(x, v) (HW_SMC_PMPROT_WR(x, HW_SMC_PMPROT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMPROT bitfields + */ + +/*! + * @name Register SMC_PMPROT, field AVLLS[1] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write once + * bit allows the MCU to enter any very-low-leakage stop mode (VLLSx). + * + * Values: + * - 0 - Any VLLSx mode is not allowed + * - 1 - Any VLLSx mode is allowed + */ +/*@{*/ +#define BP_SMC_PMPROT_AVLLS (1U) /*!< Bit position for SMC_PMPROT_AVLLS. */ +#define BM_SMC_PMPROT_AVLLS (0x02U) /*!< Bit mask for SMC_PMPROT_AVLLS. */ +#define BS_SMC_PMPROT_AVLLS (1U) /*!< Bit field size in bits for SMC_PMPROT_AVLLS. */ + +/*! @brief Read current value of the SMC_PMPROT_AVLLS field. */ +#define BR_SMC_PMPROT_AVLLS(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLLS)) + +/*! @brief Format value for bitfield SMC_PMPROT_AVLLS. */ +#define BF_SMC_PMPROT_AVLLS(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_AVLLS) & BM_SMC_PMPROT_AVLLS) + +/*! @brief Set the AVLLS field to a new value. */ +#define BW_SMC_PMPROT_AVLLS(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLLS) = (v)) +/*@}*/ + +/*! + * @name Register SMC_PMPROT, field ALLS[3] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write-once + * field allows the MCU to enter any low-leakage stop mode (LLS). + * + * Values: + * - 0 - Any LLSx mode is not allowed + * - 1 - Any LLSx mode is allowed + */ +/*@{*/ +#define BP_SMC_PMPROT_ALLS (3U) /*!< Bit position for SMC_PMPROT_ALLS. */ +#define BM_SMC_PMPROT_ALLS (0x08U) /*!< Bit mask for SMC_PMPROT_ALLS. */ +#define BS_SMC_PMPROT_ALLS (1U) /*!< Bit field size in bits for SMC_PMPROT_ALLS. */ + +/*! @brief Read current value of the SMC_PMPROT_ALLS field. */ +#define BR_SMC_PMPROT_ALLS(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_ALLS)) + +/*! @brief Format value for bitfield SMC_PMPROT_ALLS. */ +#define BF_SMC_PMPROT_ALLS(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_ALLS) & BM_SMC_PMPROT_ALLS) + +/*! @brief Set the ALLS field to a new value. */ +#define BW_SMC_PMPROT_ALLS(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_ALLS) = (v)) +/*@}*/ + +/*! + * @name Register SMC_PMPROT, field AVLP[5] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write-once + * field allows the MCU to enter any very-low-power mode (VLPR, VLPW, and VLPS). + * + * Values: + * - 0 - VLPR, VLPW, and VLPS are not allowed. + * - 1 - VLPR, VLPW, and VLPS are allowed. + */ +/*@{*/ +#define BP_SMC_PMPROT_AVLP (5U) /*!< Bit position for SMC_PMPROT_AVLP. */ +#define BM_SMC_PMPROT_AVLP (0x20U) /*!< Bit mask for SMC_PMPROT_AVLP. */ +#define BS_SMC_PMPROT_AVLP (1U) /*!< Bit field size in bits for SMC_PMPROT_AVLP. */ + +/*! @brief Read current value of the SMC_PMPROT_AVLP field. */ +#define BR_SMC_PMPROT_AVLP(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLP)) + +/*! @brief Format value for bitfield SMC_PMPROT_AVLP. */ +#define BF_SMC_PMPROT_AVLP(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_AVLP) & BM_SMC_PMPROT_AVLP) + +/*! @brief Set the AVLP field to a new value. */ +#define BW_SMC_PMPROT_AVLP(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AVLP) = (v)) +/*@}*/ + +/*! + * @name Register SMC_PMPROT, field AHSRUN[7] (RW) + * + * Provided the appropriate control bits are set up in PMCTRL, this write-once + * field allows the MCU to enter High Speed Run mode (HSRUN). + * + * Values: + * - 0 - HSRUN is not allowed + * - 1 - HSRUN is allowed + */ +/*@{*/ +#define BP_SMC_PMPROT_AHSRUN (7U) /*!< Bit position for SMC_PMPROT_AHSRUN. */ +#define BM_SMC_PMPROT_AHSRUN (0x80U) /*!< Bit mask for SMC_PMPROT_AHSRUN. */ +#define BS_SMC_PMPROT_AHSRUN (1U) /*!< Bit field size in bits for SMC_PMPROT_AHSRUN. */ + +/*! @brief Read current value of the SMC_PMPROT_AHSRUN field. */ +#define BR_SMC_PMPROT_AHSRUN(x) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AHSRUN)) + +/*! @brief Format value for bitfield SMC_PMPROT_AHSRUN. */ +#define BF_SMC_PMPROT_AHSRUN(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMPROT_AHSRUN) & BM_SMC_PMPROT_AHSRUN) + +/*! @brief Set the AHSRUN field to a new value. */ +#define BW_SMC_PMPROT_AHSRUN(x, v) (BITBAND_ACCESS8(HW_SMC_PMPROT_ADDR(x), BP_SMC_PMPROT_AHSRUN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SMC_PMCTRL - Power Mode Control register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMCTRL - Power Mode Control register (RW) + * + * Reset value: 0x00U + * + * The PMCTRL register controls entry into low-power Run and Stop modes, + * provided that the selected power mode is allowed via an appropriate setting of the + * protection (PMPROT) register. This register is reset on Chip POR not VLLS and by + * reset types that trigger Chip POR not VLLS. It is unaffected by reset types + * that do not trigger Chip POR not VLLS. See the Reset section details for more + * information. + */ +typedef union _hw_smc_pmctrl +{ + uint8_t U; + struct _hw_smc_pmctrl_bitfields + { + uint8_t STOPM : 3; /*!< [2:0] Stop Mode Control */ + uint8_t STOPA : 1; /*!< [3] Stop Aborted */ + uint8_t RESERVED0 : 1; /*!< [4] */ + uint8_t RUNM : 2; /*!< [6:5] Run Mode Control */ + uint8_t RESERVED1 : 1; /*!< [7] */ + } B; +} hw_smc_pmctrl_t; + +/*! + * @name Constants and macros for entire SMC_PMCTRL register + */ +/*@{*/ +#define HW_SMC_PMCTRL_ADDR(x) ((x) + 0x1U) + +#define HW_SMC_PMCTRL(x) (*(__IO hw_smc_pmctrl_t *) HW_SMC_PMCTRL_ADDR(x)) +#define HW_SMC_PMCTRL_RD(x) (HW_SMC_PMCTRL(x).U) +#define HW_SMC_PMCTRL_WR(x, v) (HW_SMC_PMCTRL(x).U = (v)) +#define HW_SMC_PMCTRL_SET(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) | (v))) +#define HW_SMC_PMCTRL_CLR(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) & ~(v))) +#define HW_SMC_PMCTRL_TOG(x, v) (HW_SMC_PMCTRL_WR(x, HW_SMC_PMCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMCTRL bitfields + */ + +/*! + * @name Register SMC_PMCTRL, field STOPM[2:0] (RW) + * + * When written, controls entry into the selected stop mode when Sleep-Now or + * Sleep-On-Exit mode is entered with SLEEPDEEP=1 . Writes to this field are + * blocked if the protection level has not been enabled using the PMPROT register. + * After any system reset, this field is cleared by hardware on any successful write + * to the PMPROT register. When set to VLLSxor LLSx, the LLSM in the STOPCTRL + * register is used to further select the particular VLLSor LLS submode which will + * be entered. When set to STOP, the PSTOPO bits in the STOPCTRL register can be + * used to select a Partial Stop mode if desired. + * + * Values: + * - 000 - Normal Stop (STOP) + * - 001 - Reserved + * - 010 - Very-Low-Power Stop (VLPS) + * - 011 - Low-Leakage Stop (LLSx) + * - 100 - Very-Low-Leakage Stop (VLLSx) + * - 101 - Reserved + * - 110 - Reseved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SMC_PMCTRL_STOPM (0U) /*!< Bit position for SMC_PMCTRL_STOPM. */ +#define BM_SMC_PMCTRL_STOPM (0x07U) /*!< Bit mask for SMC_PMCTRL_STOPM. */ +#define BS_SMC_PMCTRL_STOPM (3U) /*!< Bit field size in bits for SMC_PMCTRL_STOPM. */ + +/*! @brief Read current value of the SMC_PMCTRL_STOPM field. */ +#define BR_SMC_PMCTRL_STOPM(x) (HW_SMC_PMCTRL(x).B.STOPM) + +/*! @brief Format value for bitfield SMC_PMCTRL_STOPM. */ +#define BF_SMC_PMCTRL_STOPM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMCTRL_STOPM) & BM_SMC_PMCTRL_STOPM) + +/*! @brief Set the STOPM field to a new value. */ +#define BW_SMC_PMCTRL_STOPM(x, v) (HW_SMC_PMCTRL_WR(x, (HW_SMC_PMCTRL_RD(x) & ~BM_SMC_PMCTRL_STOPM) | BF_SMC_PMCTRL_STOPM(v))) +/*@}*/ + +/*! + * @name Register SMC_PMCTRL, field STOPA[3] (RO) + * + * When set, this read-only status bit indicates an interrupt occured during the + * previous stop mode entry sequence, preventing the system from entering that + * mode. This field is cleared by reset or by hardware at the beginning of any + * stop mode entry sequence and is set if the sequence was aborted. + * + * Values: + * - 0 - The previous stop mode entry was successsful. + * - 1 - The previous stop mode entry was aborted. + */ +/*@{*/ +#define BP_SMC_PMCTRL_STOPA (3U) /*!< Bit position for SMC_PMCTRL_STOPA. */ +#define BM_SMC_PMCTRL_STOPA (0x08U) /*!< Bit mask for SMC_PMCTRL_STOPA. */ +#define BS_SMC_PMCTRL_STOPA (1U) /*!< Bit field size in bits for SMC_PMCTRL_STOPA. */ + +/*! @brief Read current value of the SMC_PMCTRL_STOPA field. */ +#define BR_SMC_PMCTRL_STOPA(x) (BITBAND_ACCESS8(HW_SMC_PMCTRL_ADDR(x), BP_SMC_PMCTRL_STOPA)) +/*@}*/ + +/*! + * @name Register SMC_PMCTRL, field RUNM[6:5] (RW) + * + * When written, causes entry into the selected run mode. Writes to this field + * are blocked if the protection level has not been enabled using the PMPROT + * register. RUNM may be set to VLPR only when PMSTAT=RUN. After being written to + * VLPR, RUNM should not be written back to RUN until PMSTAT=VLPR. RUNM may be set to + * HSRUN only when PMSTAT=RUN. After being programmed to HSRUN, RUNM should not + * be programmed back to RUN until PMSTAT=HSRUN. Also, stop mode entry should not + * be attempted while RUNM=HSRUN or PMSTAT=HSRUN. + * + * Values: + * - 00 - Normal Run mode (RUN) + * - 01 - Reserved + * - 10 - Very-Low-Power Run mode (VLPR) + * - 11 - High Speed Run mode (HSRUN) + */ +/*@{*/ +#define BP_SMC_PMCTRL_RUNM (5U) /*!< Bit position for SMC_PMCTRL_RUNM. */ +#define BM_SMC_PMCTRL_RUNM (0x60U) /*!< Bit mask for SMC_PMCTRL_RUNM. */ +#define BS_SMC_PMCTRL_RUNM (2U) /*!< Bit field size in bits for SMC_PMCTRL_RUNM. */ + +/*! @brief Read current value of the SMC_PMCTRL_RUNM field. */ +#define BR_SMC_PMCTRL_RUNM(x) (HW_SMC_PMCTRL(x).B.RUNM) + +/*! @brief Format value for bitfield SMC_PMCTRL_RUNM. */ +#define BF_SMC_PMCTRL_RUNM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_PMCTRL_RUNM) & BM_SMC_PMCTRL_RUNM) + +/*! @brief Set the RUNM field to a new value. */ +#define BW_SMC_PMCTRL_RUNM(x, v) (HW_SMC_PMCTRL_WR(x, (HW_SMC_PMCTRL_RD(x) & ~BM_SMC_PMCTRL_RUNM) | BF_SMC_PMCTRL_RUNM(v))) +/*@}*/ + +/******************************************************************************* + * HW_SMC_STOPCTRL - Stop Control Register + ******************************************************************************/ + +/*! + * @brief HW_SMC_STOPCTRL - Stop Control Register (RW) + * + * Reset value: 0x03U + * + * The STOPCTRL register provides various control bits allowing the user to fine + * tune power consumption during the stop mode selected by the STOPM field. This + * register is reset on Chip POR not VLLS and by reset types that trigger Chip + * POR not VLLS. It is unaffected by reset types that do not trigger Chip POR not + * VLLS. See the Reset section details for more information. + */ +typedef union _hw_smc_stopctrl +{ + uint8_t U; + struct _hw_smc_stopctrl_bitfields + { + uint8_t LLSM : 3; /*!< [2:0] LLS or VLLS Mode Control */ + uint8_t RESERVED0 : 2; /*!< [4:3] */ + uint8_t PORPO : 1; /*!< [5] POR Power Option */ + uint8_t PSTOPO : 2; /*!< [7:6] Partial Stop Option */ + } B; +} hw_smc_stopctrl_t; + +/*! + * @name Constants and macros for entire SMC_STOPCTRL register + */ +/*@{*/ +#define HW_SMC_STOPCTRL_ADDR(x) ((x) + 0x2U) + +#define HW_SMC_STOPCTRL(x) (*(__IO hw_smc_stopctrl_t *) HW_SMC_STOPCTRL_ADDR(x)) +#define HW_SMC_STOPCTRL_RD(x) (HW_SMC_STOPCTRL(x).U) +#define HW_SMC_STOPCTRL_WR(x, v) (HW_SMC_STOPCTRL(x).U = (v)) +#define HW_SMC_STOPCTRL_SET(x, v) (HW_SMC_STOPCTRL_WR(x, HW_SMC_STOPCTRL_RD(x) | (v))) +#define HW_SMC_STOPCTRL_CLR(x, v) (HW_SMC_STOPCTRL_WR(x, HW_SMC_STOPCTRL_RD(x) & ~(v))) +#define HW_SMC_STOPCTRL_TOG(x, v) (HW_SMC_STOPCTRL_WR(x, HW_SMC_STOPCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SMC_STOPCTRL bitfields + */ + +/*! + * @name Register SMC_STOPCTRL, field LLSM[2:0] (RW) + * + * This field controls which LLS or VLLS sub-mode to enter if STOPM=LLSx or + * VLLSx. + * + * Values: + * - 000 - VLLS0 if PMCTRL[STOPM]=VLLSx, LLS2 if PMCTRL[STOPM]=LLSx + * - 001 - VLLS1 if PMCTRL[STOPM]=VLLSx, LLS2 if PMCTRL[STOPM]=LLSx + * - 010 - VLLS2 if PMCTRL[STOPM]=VLLSx, LLS2 if PMCTRL[STOPM]=LLSx + * - 011 - VLLS3 if PMCTRL[STOPM]=VLLSx, LLS3 if PMCTRL[STOPM]=LLSx + * - 100 - Reserved + * - 101 - Reserved + * - 110 - Reserved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SMC_STOPCTRL_LLSM (0U) /*!< Bit position for SMC_STOPCTRL_LLSM. */ +#define BM_SMC_STOPCTRL_LLSM (0x07U) /*!< Bit mask for SMC_STOPCTRL_LLSM. */ +#define BS_SMC_STOPCTRL_LLSM (3U) /*!< Bit field size in bits for SMC_STOPCTRL_LLSM. */ + +/*! @brief Read current value of the SMC_STOPCTRL_LLSM field. */ +#define BR_SMC_STOPCTRL_LLSM(x) (HW_SMC_STOPCTRL(x).B.LLSM) + +/*! @brief Format value for bitfield SMC_STOPCTRL_LLSM. */ +#define BF_SMC_STOPCTRL_LLSM(v) ((uint8_t)((uint8_t)(v) << BP_SMC_STOPCTRL_LLSM) & BM_SMC_STOPCTRL_LLSM) + +/*! @brief Set the LLSM field to a new value. */ +#define BW_SMC_STOPCTRL_LLSM(x, v) (HW_SMC_STOPCTRL_WR(x, (HW_SMC_STOPCTRL_RD(x) & ~BM_SMC_STOPCTRL_LLSM) | BF_SMC_STOPCTRL_LLSM(v))) +/*@}*/ + +/*! + * @name Register SMC_STOPCTRL, field PORPO[5] (RW) + * + * This bit controls whether the POR detect circuit is enabled in VLLS0 mode. + * + * Values: + * - 0 - POR detect circuit is enabled in VLLS0 + * - 1 - POR detect circuit is disabled in VLLS0 + */ +/*@{*/ +#define BP_SMC_STOPCTRL_PORPO (5U) /*!< Bit position for SMC_STOPCTRL_PORPO. */ +#define BM_SMC_STOPCTRL_PORPO (0x20U) /*!< Bit mask for SMC_STOPCTRL_PORPO. */ +#define BS_SMC_STOPCTRL_PORPO (1U) /*!< Bit field size in bits for SMC_STOPCTRL_PORPO. */ + +/*! @brief Read current value of the SMC_STOPCTRL_PORPO field. */ +#define BR_SMC_STOPCTRL_PORPO(x) (BITBAND_ACCESS8(HW_SMC_STOPCTRL_ADDR(x), BP_SMC_STOPCTRL_PORPO)) + +/*! @brief Format value for bitfield SMC_STOPCTRL_PORPO. */ +#define BF_SMC_STOPCTRL_PORPO(v) ((uint8_t)((uint8_t)(v) << BP_SMC_STOPCTRL_PORPO) & BM_SMC_STOPCTRL_PORPO) + +/*! @brief Set the PORPO field to a new value. */ +#define BW_SMC_STOPCTRL_PORPO(x, v) (BITBAND_ACCESS8(HW_SMC_STOPCTRL_ADDR(x), BP_SMC_STOPCTRL_PORPO) = (v)) +/*@}*/ + +/*! + * @name Register SMC_STOPCTRL, field PSTOPO[7:6] (RW) + * + * These bits control whether a Partial Stop mode is entered when STOPM=STOP. + * When entering a Partial Stop mode from RUN mode, the PMC, MCG and flash remain + * fully powered, allowing the device to wakeup almost instantaneously at the + * expense of higher power consumption. In PSTOP2, only system clocks are gated + * allowing peripherals running on bus clock to remain fully functional. In PSTOP1, + * both system and bus clocks are gated. + * + * Values: + * - 00 - STOP - Normal Stop mode + * - 01 - PSTOP1 - Partial Stop with both system and bus clocks disabled + * - 10 - PSTOP2 - Partial Stop with system clock disabled and bus clock enabled + * - 11 - Reserved + */ +/*@{*/ +#define BP_SMC_STOPCTRL_PSTOPO (6U) /*!< Bit position for SMC_STOPCTRL_PSTOPO. */ +#define BM_SMC_STOPCTRL_PSTOPO (0xC0U) /*!< Bit mask for SMC_STOPCTRL_PSTOPO. */ +#define BS_SMC_STOPCTRL_PSTOPO (2U) /*!< Bit field size in bits for SMC_STOPCTRL_PSTOPO. */ + +/*! @brief Read current value of the SMC_STOPCTRL_PSTOPO field. */ +#define BR_SMC_STOPCTRL_PSTOPO(x) (HW_SMC_STOPCTRL(x).B.PSTOPO) + +/*! @brief Format value for bitfield SMC_STOPCTRL_PSTOPO. */ +#define BF_SMC_STOPCTRL_PSTOPO(v) ((uint8_t)((uint8_t)(v) << BP_SMC_STOPCTRL_PSTOPO) & BM_SMC_STOPCTRL_PSTOPO) + +/*! @brief Set the PSTOPO field to a new value. */ +#define BW_SMC_STOPCTRL_PSTOPO(x, v) (HW_SMC_STOPCTRL_WR(x, (HW_SMC_STOPCTRL_RD(x) & ~BM_SMC_STOPCTRL_PSTOPO) | BF_SMC_STOPCTRL_PSTOPO(v))) +/*@}*/ + +/******************************************************************************* + * HW_SMC_PMSTAT - Power Mode Status register + ******************************************************************************/ + +/*! + * @brief HW_SMC_PMSTAT - Power Mode Status register (RO) + * + * Reset value: 0x01U + * + * PMSTAT is a read-only, one-hot register which indicates the current power + * mode of the system. This register is reset on Chip POR not VLLS and by reset + * types that trigger Chip POR not VLLS. It is unaffected by reset types that do not + * trigger Chip POR not VLLS. See the Reset section details for more information. + */ +typedef union _hw_smc_pmstat +{ + uint8_t U; + struct _hw_smc_pmstat_bitfields + { + uint8_t PMSTAT : 8; /*!< [7:0] */ + } B; +} hw_smc_pmstat_t; + +/*! + * @name Constants and macros for entire SMC_PMSTAT register + */ +/*@{*/ +#define HW_SMC_PMSTAT_ADDR(x) ((x) + 0x3U) + +#define HW_SMC_PMSTAT(x) (*(__I hw_smc_pmstat_t *) HW_SMC_PMSTAT_ADDR(x)) +#define HW_SMC_PMSTAT_RD(x) (HW_SMC_PMSTAT(x).U) +/*@}*/ + +/* + * Constants & macros for individual SMC_PMSTAT bitfields + */ + +/*! + * @name Register SMC_PMSTAT, field PMSTAT[7:0] (RO) + * + * When debug is enabled, the PMSTAT will not update to STOP or VLPS When a + * PSTOP mode is enabled, the PMSTAT will not update to STOP or VLPS + */ +/*@{*/ +#define BP_SMC_PMSTAT_PMSTAT (0U) /*!< Bit position for SMC_PMSTAT_PMSTAT. */ +#define BM_SMC_PMSTAT_PMSTAT (0xFFU) /*!< Bit mask for SMC_PMSTAT_PMSTAT. */ +#define BS_SMC_PMSTAT_PMSTAT (8U) /*!< Bit field size in bits for SMC_PMSTAT_PMSTAT. */ + +/*! @brief Read current value of the SMC_PMSTAT_PMSTAT field. */ +#define BR_SMC_PMSTAT_PMSTAT(x) (HW_SMC_PMSTAT(x).U) +/*@}*/ + +/******************************************************************************* + * hw_smc_t - module struct + ******************************************************************************/ +/*! + * @brief All SMC module registers. + */ +#pragma pack(1) +typedef struct _hw_smc +{ + __IO hw_smc_pmprot_t PMPROT; /*!< [0x0] Power Mode Protection register */ + __IO hw_smc_pmctrl_t PMCTRL; /*!< [0x1] Power Mode Control register */ + __IO hw_smc_stopctrl_t STOPCTRL; /*!< [0x2] Stop Control Register */ + __I hw_smc_pmstat_t PMSTAT; /*!< [0x3] Power Mode Status register */ +} hw_smc_t; +#pragma pack() + +/*! @brief Macro to access all SMC registers. */ +/*! @param x SMC module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_SMC(SMC_BASE)</code>. */ +#define HW_SMC(x) (*(hw_smc_t *)(x)) + +#endif /* __HW_SMC_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_spi.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_spi.h new file mode 100644 index 0000000000..ff5a2b4297 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_spi.h @@ -0,0 +1,2239 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_SPI_REGISTERS_H__ +#define __HW_SPI_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 SPI + * + * Serial Peripheral Interface + * + * Registers defined in this header file: + * - HW_SPI_MCR - Module Configuration Register + * - HW_SPI_TCR - Transfer Count Register + * - HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode) + * - HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode) + * - HW_SPI_SR - Status Register + * - HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register + * - HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode + * - HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode + * - HW_SPI_POPR - POP RX FIFO Register + * - HW_SPI_TXFRn - Transmit FIFO Registers + * - HW_SPI_RXFRn - Receive FIFO Registers + * + * - hw_spi_t - Struct containing all module registers. + */ + +#define HW_SPI_INSTANCE_COUNT (2U) /*!< Number of instances of the SPI module. */ +#define HW_SPI0 (0U) /*!< Instance number for SPI0. */ +#define HW_SPI1 (1U) /*!< Instance number for SPI1. */ + +/******************************************************************************* + * HW_SPI_MCR - Module Configuration Register + ******************************************************************************/ + +/*! + * @brief HW_SPI_MCR - Module Configuration Register (RW) + * + * Reset value: 0x00004001U + * + * Contains bits to configure various attributes associated with the module + * operations. The HALT and MDIS bits can be changed at any time, but the effect + * takes place only on the next frame boundary. Only the HALT and MDIS bits in the + * MCR can be changed, while the module is in the Running state. + */ +typedef union _hw_spi_mcr +{ + uint32_t U; + struct _hw_spi_mcr_bitfields + { + uint32_t HALT : 1; /*!< [0] Halt */ + uint32_t RESERVED0 : 7; /*!< [7:1] */ + uint32_t SMPL_PT : 2; /*!< [9:8] Sample Point */ + uint32_t CLR_RXF : 1; /*!< [10] */ + uint32_t CLR_TXF : 1; /*!< [11] Clear TX FIFO */ + uint32_t DIS_RXF : 1; /*!< [12] Disable Receive FIFO */ + uint32_t DIS_TXF : 1; /*!< [13] Disable Transmit FIFO */ + uint32_t MDIS : 1; /*!< [14] Module Disable */ + uint32_t DOZE : 1; /*!< [15] Doze Enable */ + uint32_t PCSIS : 6; /*!< [21:16] Peripheral Chip Select x Inactive + * State */ + uint32_t RESERVED1 : 2; /*!< [23:22] */ + uint32_t ROOE : 1; /*!< [24] Receive FIFO Overflow Overwrite Enable */ + uint32_t PCSSE : 1; /*!< [25] Peripheral Chip Select Strobe Enable */ + uint32_t MTFE : 1; /*!< [26] Modified Timing Format Enable */ + uint32_t FRZ : 1; /*!< [27] Freeze */ + uint32_t DCONF : 2; /*!< [29:28] SPI Configuration. */ + uint32_t CONT_SCKE : 1; /*!< [30] Continuous SCK Enable */ + uint32_t MSTR : 1; /*!< [31] Master/Slave Mode Select */ + } B; +} hw_spi_mcr_t; + +/*! + * @name Constants and macros for entire SPI_MCR register + */ +/*@{*/ +#define HW_SPI_MCR_ADDR(x) ((x) + 0x0U) + +#define HW_SPI_MCR(x) (*(__IO hw_spi_mcr_t *) HW_SPI_MCR_ADDR(x)) +#define HW_SPI_MCR_RD(x) (HW_SPI_MCR(x).U) +#define HW_SPI_MCR_WR(x, v) (HW_SPI_MCR(x).U = (v)) +#define HW_SPI_MCR_SET(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) | (v))) +#define HW_SPI_MCR_CLR(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) & ~(v))) +#define HW_SPI_MCR_TOG(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_MCR bitfields + */ + +/*! + * @name Register SPI_MCR, field HALT[0] (RW) + * + * The HALT bit starts and stops frame transfers. See Start and Stop of Module + * transfers + * + * Values: + * - 0 - Start transfers. + * - 1 - Stop transfers. + */ +/*@{*/ +#define BP_SPI_MCR_HALT (0U) /*!< Bit position for SPI_MCR_HALT. */ +#define BM_SPI_MCR_HALT (0x00000001U) /*!< Bit mask for SPI_MCR_HALT. */ +#define BS_SPI_MCR_HALT (1U) /*!< Bit field size in bits for SPI_MCR_HALT. */ + +/*! @brief Read current value of the SPI_MCR_HALT field. */ +#define BR_SPI_MCR_HALT(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_HALT)) + +/*! @brief Format value for bitfield SPI_MCR_HALT. */ +#define BF_SPI_MCR_HALT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_HALT) & BM_SPI_MCR_HALT) + +/*! @brief Set the HALT field to a new value. */ +#define BW_SPI_MCR_HALT(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_HALT) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field SMPL_PT[9:8] (RW) + * + * Controls when the module master samples SIN in Modified Transfer Format. This + * field is valid only when CPHA bit in CTARn[CPHA] is 0. + * + * Values: + * - 00 - 0 protocol clock cycles between SCK edge and SIN sample + * - 01 - 1 protocol clock cycle between SCK edge and SIN sample + * - 10 - 2 protocol clock cycles between SCK edge and SIN sample + * - 11 - Reserved + */ +/*@{*/ +#define BP_SPI_MCR_SMPL_PT (8U) /*!< Bit position for SPI_MCR_SMPL_PT. */ +#define BM_SPI_MCR_SMPL_PT (0x00000300U) /*!< Bit mask for SPI_MCR_SMPL_PT. */ +#define BS_SPI_MCR_SMPL_PT (2U) /*!< Bit field size in bits for SPI_MCR_SMPL_PT. */ + +/*! @brief Read current value of the SPI_MCR_SMPL_PT field. */ +#define BR_SPI_MCR_SMPL_PT(x) (HW_SPI_MCR(x).B.SMPL_PT) + +/*! @brief Format value for bitfield SPI_MCR_SMPL_PT. */ +#define BF_SPI_MCR_SMPL_PT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_SMPL_PT) & BM_SPI_MCR_SMPL_PT) + +/*! @brief Set the SMPL_PT field to a new value. */ +#define BW_SPI_MCR_SMPL_PT(x, v) (HW_SPI_MCR_WR(x, (HW_SPI_MCR_RD(x) & ~BM_SPI_MCR_SMPL_PT) | BF_SPI_MCR_SMPL_PT(v))) +/*@}*/ + +/*! + * @name Register SPI_MCR, field CLR_RXF[10] (WORZ) + * + * Flushes the RX FIFO. Writing a 1 to CLR_RXF clears the RX Counter. The + * CLR_RXF bit is always read as zero. + * + * Values: + * - 0 - Do not clear the RX FIFO counter. + * - 1 - Clear the RX FIFO counter. + */ +/*@{*/ +#define BP_SPI_MCR_CLR_RXF (10U) /*!< Bit position for SPI_MCR_CLR_RXF. */ +#define BM_SPI_MCR_CLR_RXF (0x00000400U) /*!< Bit mask for SPI_MCR_CLR_RXF. */ +#define BS_SPI_MCR_CLR_RXF (1U) /*!< Bit field size in bits for SPI_MCR_CLR_RXF. */ + +/*! @brief Format value for bitfield SPI_MCR_CLR_RXF. */ +#define BF_SPI_MCR_CLR_RXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CLR_RXF) & BM_SPI_MCR_CLR_RXF) + +/*! @brief Set the CLR_RXF field to a new value. */ +#define BW_SPI_MCR_CLR_RXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CLR_RXF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field CLR_TXF[11] (WORZ) + * + * Flushes the TX FIFO. Writing a 1 to CLR_TXF clears the TX FIFO Counter. The + * CLR_TXF bit is always read as zero. + * + * Values: + * - 0 - Do not clear the TX FIFO counter. + * - 1 - Clear the TX FIFO counter. + */ +/*@{*/ +#define BP_SPI_MCR_CLR_TXF (11U) /*!< Bit position for SPI_MCR_CLR_TXF. */ +#define BM_SPI_MCR_CLR_TXF (0x00000800U) /*!< Bit mask for SPI_MCR_CLR_TXF. */ +#define BS_SPI_MCR_CLR_TXF (1U) /*!< Bit field size in bits for SPI_MCR_CLR_TXF. */ + +/*! @brief Format value for bitfield SPI_MCR_CLR_TXF. */ +#define BF_SPI_MCR_CLR_TXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CLR_TXF) & BM_SPI_MCR_CLR_TXF) + +/*! @brief Set the CLR_TXF field to a new value. */ +#define BW_SPI_MCR_CLR_TXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CLR_TXF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field DIS_RXF[12] (RW) + * + * When the RX FIFO is disabled, the receive part of the module operates as a + * simplified double-buffered SPI. This bit can only be written when the MDIS bit + * is cleared. + * + * Values: + * - 0 - RX FIFO is enabled. + * - 1 - RX FIFO is disabled. + */ +/*@{*/ +#define BP_SPI_MCR_DIS_RXF (12U) /*!< Bit position for SPI_MCR_DIS_RXF. */ +#define BM_SPI_MCR_DIS_RXF (0x00001000U) /*!< Bit mask for SPI_MCR_DIS_RXF. */ +#define BS_SPI_MCR_DIS_RXF (1U) /*!< Bit field size in bits for SPI_MCR_DIS_RXF. */ + +/*! @brief Read current value of the SPI_MCR_DIS_RXF field. */ +#define BR_SPI_MCR_DIS_RXF(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_RXF)) + +/*! @brief Format value for bitfield SPI_MCR_DIS_RXF. */ +#define BF_SPI_MCR_DIS_RXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DIS_RXF) & BM_SPI_MCR_DIS_RXF) + +/*! @brief Set the DIS_RXF field to a new value. */ +#define BW_SPI_MCR_DIS_RXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_RXF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field DIS_TXF[13] (RW) + * + * When the TX FIFO is disabled, the transmit part of the module operates as a + * simplified double-buffered SPI. This bit can be written only when the MDIS bit + * is cleared. + * + * Values: + * - 0 - TX FIFO is enabled. + * - 1 - TX FIFO is disabled. + */ +/*@{*/ +#define BP_SPI_MCR_DIS_TXF (13U) /*!< Bit position for SPI_MCR_DIS_TXF. */ +#define BM_SPI_MCR_DIS_TXF (0x00002000U) /*!< Bit mask for SPI_MCR_DIS_TXF. */ +#define BS_SPI_MCR_DIS_TXF (1U) /*!< Bit field size in bits for SPI_MCR_DIS_TXF. */ + +/*! @brief Read current value of the SPI_MCR_DIS_TXF field. */ +#define BR_SPI_MCR_DIS_TXF(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_TXF)) + +/*! @brief Format value for bitfield SPI_MCR_DIS_TXF. */ +#define BF_SPI_MCR_DIS_TXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DIS_TXF) & BM_SPI_MCR_DIS_TXF) + +/*! @brief Set the DIS_TXF field to a new value. */ +#define BW_SPI_MCR_DIS_TXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_TXF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field MDIS[14] (RW) + * + * Allows the clock to be stopped to the non-memory mapped logic in the module + * effectively putting it in a software-controlled power-saving state. The reset + * value of the MDIS bit is parameterized, with a default reset value of 0. When + * the module is used in Slave Mode, we recommend leaving this bit 0, because a + * slave doesn't have control over master transactions. + * + * Values: + * - 0 - Enables the module clocks. + * - 1 - Allows external logic to disable the module clocks. + */ +/*@{*/ +#define BP_SPI_MCR_MDIS (14U) /*!< Bit position for SPI_MCR_MDIS. */ +#define BM_SPI_MCR_MDIS (0x00004000U) /*!< Bit mask for SPI_MCR_MDIS. */ +#define BS_SPI_MCR_MDIS (1U) /*!< Bit field size in bits for SPI_MCR_MDIS. */ + +/*! @brief Read current value of the SPI_MCR_MDIS field. */ +#define BR_SPI_MCR_MDIS(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MDIS)) + +/*! @brief Format value for bitfield SPI_MCR_MDIS. */ +#define BF_SPI_MCR_MDIS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MDIS) & BM_SPI_MCR_MDIS) + +/*! @brief Set the MDIS field to a new value. */ +#define BW_SPI_MCR_MDIS(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MDIS) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field DOZE[15] (RW) + * + * Provides support for an externally controlled Doze mode power-saving + * mechanism. + * + * Values: + * - 0 - Doze mode has no effect on the module. + * - 1 - Doze mode disables the module. + */ +/*@{*/ +#define BP_SPI_MCR_DOZE (15U) /*!< Bit position for SPI_MCR_DOZE. */ +#define BM_SPI_MCR_DOZE (0x00008000U) /*!< Bit mask for SPI_MCR_DOZE. */ +#define BS_SPI_MCR_DOZE (1U) /*!< Bit field size in bits for SPI_MCR_DOZE. */ + +/*! @brief Read current value of the SPI_MCR_DOZE field. */ +#define BR_SPI_MCR_DOZE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DOZE)) + +/*! @brief Format value for bitfield SPI_MCR_DOZE. */ +#define BF_SPI_MCR_DOZE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DOZE) & BM_SPI_MCR_DOZE) + +/*! @brief Set the DOZE field to a new value. */ +#define BW_SPI_MCR_DOZE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DOZE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field PCSIS[21:16] (RW) + * + * Determines the inactive state of PCSx. + * + * Values: + * - 0 - The inactive state of PCSx is low. + * - 1 - The inactive state of PCSx is high. + */ +/*@{*/ +#define BP_SPI_MCR_PCSIS (16U) /*!< Bit position for SPI_MCR_PCSIS. */ +#define BM_SPI_MCR_PCSIS (0x003F0000U) /*!< Bit mask for SPI_MCR_PCSIS. */ +#define BS_SPI_MCR_PCSIS (6U) /*!< Bit field size in bits for SPI_MCR_PCSIS. */ + +/*! @brief Read current value of the SPI_MCR_PCSIS field. */ +#define BR_SPI_MCR_PCSIS(x) (HW_SPI_MCR(x).B.PCSIS) + +/*! @brief Format value for bitfield SPI_MCR_PCSIS. */ +#define BF_SPI_MCR_PCSIS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_PCSIS) & BM_SPI_MCR_PCSIS) + +/*! @brief Set the PCSIS field to a new value. */ +#define BW_SPI_MCR_PCSIS(x, v) (HW_SPI_MCR_WR(x, (HW_SPI_MCR_RD(x) & ~BM_SPI_MCR_PCSIS) | BF_SPI_MCR_PCSIS(v))) +/*@}*/ + +/*! + * @name Register SPI_MCR, field ROOE[24] (RW) + * + * In the RX FIFO overflow condition, configures the module to ignore the + * incoming serial data or overwrite existing data. If the RX FIFO is full and new data + * is received, the data from the transfer, generating the overflow, is ignored + * or shifted into the shift register. + * + * Values: + * - 0 - Incoming data is ignored. + * - 1 - Incoming data is shifted into the shift register. + */ +/*@{*/ +#define BP_SPI_MCR_ROOE (24U) /*!< Bit position for SPI_MCR_ROOE. */ +#define BM_SPI_MCR_ROOE (0x01000000U) /*!< Bit mask for SPI_MCR_ROOE. */ +#define BS_SPI_MCR_ROOE (1U) /*!< Bit field size in bits for SPI_MCR_ROOE. */ + +/*! @brief Read current value of the SPI_MCR_ROOE field. */ +#define BR_SPI_MCR_ROOE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_ROOE)) + +/*! @brief Format value for bitfield SPI_MCR_ROOE. */ +#define BF_SPI_MCR_ROOE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_ROOE) & BM_SPI_MCR_ROOE) + +/*! @brief Set the ROOE field to a new value. */ +#define BW_SPI_MCR_ROOE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_ROOE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field PCSSE[25] (RW) + * + * Enables the PCS5/ PCSS to operate as a PCS Strobe output signal. + * + * Values: + * - 0 - PCS5/ PCSS is used as the Peripheral Chip Select[5] signal. + * - 1 - PCS5/ PCSS is used as an active-low PCS Strobe signal. + */ +/*@{*/ +#define BP_SPI_MCR_PCSSE (25U) /*!< Bit position for SPI_MCR_PCSSE. */ +#define BM_SPI_MCR_PCSSE (0x02000000U) /*!< Bit mask for SPI_MCR_PCSSE. */ +#define BS_SPI_MCR_PCSSE (1U) /*!< Bit field size in bits for SPI_MCR_PCSSE. */ + +/*! @brief Read current value of the SPI_MCR_PCSSE field. */ +#define BR_SPI_MCR_PCSSE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_PCSSE)) + +/*! @brief Format value for bitfield SPI_MCR_PCSSE. */ +#define BF_SPI_MCR_PCSSE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_PCSSE) & BM_SPI_MCR_PCSSE) + +/*! @brief Set the PCSSE field to a new value. */ +#define BW_SPI_MCR_PCSSE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_PCSSE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field MTFE[26] (RW) + * + * Enables a modified transfer format to be used. + * + * Values: + * - 0 - Modified SPI transfer format disabled. + * - 1 - Modified SPI transfer format enabled. + */ +/*@{*/ +#define BP_SPI_MCR_MTFE (26U) /*!< Bit position for SPI_MCR_MTFE. */ +#define BM_SPI_MCR_MTFE (0x04000000U) /*!< Bit mask for SPI_MCR_MTFE. */ +#define BS_SPI_MCR_MTFE (1U) /*!< Bit field size in bits for SPI_MCR_MTFE. */ + +/*! @brief Read current value of the SPI_MCR_MTFE field. */ +#define BR_SPI_MCR_MTFE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MTFE)) + +/*! @brief Format value for bitfield SPI_MCR_MTFE. */ +#define BF_SPI_MCR_MTFE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MTFE) & BM_SPI_MCR_MTFE) + +/*! @brief Set the MTFE field to a new value. */ +#define BW_SPI_MCR_MTFE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MTFE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field FRZ[27] (RW) + * + * Enables transfers to be stopped on the next frame boundary when the device + * enters Debug mode. + * + * Values: + * - 0 - Do not halt serial transfers in Debug mode. + * - 1 - Halt serial transfers in Debug mode. + */ +/*@{*/ +#define BP_SPI_MCR_FRZ (27U) /*!< Bit position for SPI_MCR_FRZ. */ +#define BM_SPI_MCR_FRZ (0x08000000U) /*!< Bit mask for SPI_MCR_FRZ. */ +#define BS_SPI_MCR_FRZ (1U) /*!< Bit field size in bits for SPI_MCR_FRZ. */ + +/*! @brief Read current value of the SPI_MCR_FRZ field. */ +#define BR_SPI_MCR_FRZ(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_FRZ)) + +/*! @brief Format value for bitfield SPI_MCR_FRZ. */ +#define BF_SPI_MCR_FRZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_FRZ) & BM_SPI_MCR_FRZ) + +/*! @brief Set the FRZ field to a new value. */ +#define BW_SPI_MCR_FRZ(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_FRZ) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field DCONF[29:28] (RO) + * + * Selects among the different configurations of the module. + * + * Values: + * - 00 - SPI + * - 01 - Reserved + * - 10 - Reserved + * - 11 - Reserved + */ +/*@{*/ +#define BP_SPI_MCR_DCONF (28U) /*!< Bit position for SPI_MCR_DCONF. */ +#define BM_SPI_MCR_DCONF (0x30000000U) /*!< Bit mask for SPI_MCR_DCONF. */ +#define BS_SPI_MCR_DCONF (2U) /*!< Bit field size in bits for SPI_MCR_DCONF. */ + +/*! @brief Read current value of the SPI_MCR_DCONF field. */ +#define BR_SPI_MCR_DCONF(x) (HW_SPI_MCR(x).B.DCONF) +/*@}*/ + +/*! + * @name Register SPI_MCR, field CONT_SCKE[30] (RW) + * + * Enables the Serial Communication Clock (SCK) to run continuously. + * + * Values: + * - 0 - Continuous SCK disabled. + * - 1 - Continuous SCK enabled. + */ +/*@{*/ +#define BP_SPI_MCR_CONT_SCKE (30U) /*!< Bit position for SPI_MCR_CONT_SCKE. */ +#define BM_SPI_MCR_CONT_SCKE (0x40000000U) /*!< Bit mask for SPI_MCR_CONT_SCKE. */ +#define BS_SPI_MCR_CONT_SCKE (1U) /*!< Bit field size in bits for SPI_MCR_CONT_SCKE. */ + +/*! @brief Read current value of the SPI_MCR_CONT_SCKE field. */ +#define BR_SPI_MCR_CONT_SCKE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CONT_SCKE)) + +/*! @brief Format value for bitfield SPI_MCR_CONT_SCKE. */ +#define BF_SPI_MCR_CONT_SCKE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CONT_SCKE) & BM_SPI_MCR_CONT_SCKE) + +/*! @brief Set the CONT_SCKE field to a new value. */ +#define BW_SPI_MCR_CONT_SCKE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CONT_SCKE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_MCR, field MSTR[31] (RW) + * + * Enables either Master mode (if supported) or Slave mode (if supported) + * operation. + * + * Values: + * - 0 - Enables Slave mode + * - 1 - Enables Master mode + */ +/*@{*/ +#define BP_SPI_MCR_MSTR (31U) /*!< Bit position for SPI_MCR_MSTR. */ +#define BM_SPI_MCR_MSTR (0x80000000U) /*!< Bit mask for SPI_MCR_MSTR. */ +#define BS_SPI_MCR_MSTR (1U) /*!< Bit field size in bits for SPI_MCR_MSTR. */ + +/*! @brief Read current value of the SPI_MCR_MSTR field. */ +#define BR_SPI_MCR_MSTR(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MSTR)) + +/*! @brief Format value for bitfield SPI_MCR_MSTR. */ +#define BF_SPI_MCR_MSTR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MSTR) & BM_SPI_MCR_MSTR) + +/*! @brief Set the MSTR field to a new value. */ +#define BW_SPI_MCR_MSTR(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MSTR) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SPI_TCR - Transfer Count Register + ******************************************************************************/ + +/*! + * @brief HW_SPI_TCR - Transfer Count Register (RW) + * + * Reset value: 0x00000000U + * + * TCR contains a counter that indicates the number of SPI transfers made. The + * transfer counter is intended to assist in queue management. Do not write the + * TCR when the module is in the Running state. + */ +typedef union _hw_spi_tcr +{ + uint32_t U; + struct _hw_spi_tcr_bitfields + { + uint32_t RESERVED0 : 16; /*!< [15:0] */ + uint32_t SPI_TCNT : 16; /*!< [31:16] SPI Transfer Counter */ + } B; +} hw_spi_tcr_t; + +/*! + * @name Constants and macros for entire SPI_TCR register + */ +/*@{*/ +#define HW_SPI_TCR_ADDR(x) ((x) + 0x8U) + +#define HW_SPI_TCR(x) (*(__IO hw_spi_tcr_t *) HW_SPI_TCR_ADDR(x)) +#define HW_SPI_TCR_RD(x) (HW_SPI_TCR(x).U) +#define HW_SPI_TCR_WR(x, v) (HW_SPI_TCR(x).U = (v)) +#define HW_SPI_TCR_SET(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) | (v))) +#define HW_SPI_TCR_CLR(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) & ~(v))) +#define HW_SPI_TCR_TOG(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_TCR bitfields + */ + +/*! + * @name Register SPI_TCR, field SPI_TCNT[31:16] (RW) + * + * Counts the number of SPI transfers the module makes. The SPI_TCNT field + * increments every time the last bit of an SPI frame is transmitted. A value written + * to SPI_TCNT presets the counter to that value. SPI_TCNT is reset to zero at + * the beginning of the frame when the CTCNT field is set in the executing SPI + * command. The Transfer Counter wraps around; incrementing the counter past 65535 + * resets the counter to zero. + */ +/*@{*/ +#define BP_SPI_TCR_SPI_TCNT (16U) /*!< Bit position for SPI_TCR_SPI_TCNT. */ +#define BM_SPI_TCR_SPI_TCNT (0xFFFF0000U) /*!< Bit mask for SPI_TCR_SPI_TCNT. */ +#define BS_SPI_TCR_SPI_TCNT (16U) /*!< Bit field size in bits for SPI_TCR_SPI_TCNT. */ + +/*! @brief Read current value of the SPI_TCR_SPI_TCNT field. */ +#define BR_SPI_TCR_SPI_TCNT(x) (HW_SPI_TCR(x).B.SPI_TCNT) + +/*! @brief Format value for bitfield SPI_TCR_SPI_TCNT. */ +#define BF_SPI_TCR_SPI_TCNT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_TCR_SPI_TCNT) & BM_SPI_TCR_SPI_TCNT) + +/*! @brief Set the SPI_TCNT field to a new value. */ +#define BW_SPI_TCR_SPI_TCNT(x, v) (HW_SPI_TCR_WR(x, (HW_SPI_TCR_RD(x) & ~BM_SPI_TCR_SPI_TCNT) | BF_SPI_TCR_SPI_TCNT(v))) +/*@}*/ + +/******************************************************************************* + * HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode) + ******************************************************************************/ + +/*! + * @brief HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode) (RW) + * + * Reset value: 0x78000000U + * + * CTAR registers are used to define different transfer attributes. Do not write + * to the CTAR registers while the module is in the Running state. In Master + * mode, the CTAR registers define combinations of transfer attributes such as frame + * size, clock phase and polarity, data bit ordering, baud rate, and various + * delays. In slave mode, a subset of the bitfields in CTAR0 are used to set the + * slave transfer attributes. When the module is configured as an SPI master, the + * CTAS field in the command portion of the TX FIFO entry selects which of the CTAR + * registers is used. When the module is configured as an SPI bus slave, it uses + * the CTAR0 register. + */ +typedef union _hw_spi_ctarn +{ + uint32_t U; + struct _hw_spi_ctarn_bitfields + { + uint32_t BR : 4; /*!< [3:0] Baud Rate Scaler */ + uint32_t DT : 4; /*!< [7:4] Delay After Transfer Scaler */ + uint32_t ASC : 4; /*!< [11:8] After SCK Delay Scaler */ + uint32_t CSSCK : 4; /*!< [15:12] PCS to SCK Delay Scaler */ + uint32_t PBR : 2; /*!< [17:16] Baud Rate Prescaler */ + uint32_t PDT : 2; /*!< [19:18] Delay after Transfer Prescaler */ + uint32_t PASC : 2; /*!< [21:20] After SCK Delay Prescaler */ + uint32_t PCSSCK : 2; /*!< [23:22] PCS to SCK Delay Prescaler */ + uint32_t LSBFE : 1; /*!< [24] LSB First */ + uint32_t CPHA : 1; /*!< [25] Clock Phase */ + uint32_t CPOL : 1; /*!< [26] Clock Polarity */ + uint32_t FMSZ : 4; /*!< [30:27] Frame Size */ + uint32_t DBR : 1; /*!< [31] Double Baud Rate */ + } B; +} hw_spi_ctarn_t; + +/*! + * @name Constants and macros for entire SPI_CTARn register + */ +/*@{*/ +#define HW_SPI_CTARn_COUNT (2U) + +#define HW_SPI_CTARn_ADDR(x, n) ((x) + 0xCU + (0x4U * (n))) + +#define HW_SPI_CTARn(x, n) (*(__IO hw_spi_ctarn_t *) HW_SPI_CTARn_ADDR(x, n)) +#define HW_SPI_CTARn_RD(x, n) (HW_SPI_CTARn(x, n).U) +#define HW_SPI_CTARn_WR(x, n, v) (HW_SPI_CTARn(x, n).U = (v)) +#define HW_SPI_CTARn_SET(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) | (v))) +#define HW_SPI_CTARn_CLR(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) & ~(v))) +#define HW_SPI_CTARn_TOG(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_CTARn bitfields + */ + +/*! + * @name Register SPI_CTARn, field BR[3:0] (RW) + * + * Selects the scaler value for the baud rate. This field is used only in master + * mode. The prescaled protocol clock is divided by the Baud Rate Scaler to + * generate the frequency of the SCK. The baud rate is computed according to the + * following equation: SCK baud rate = (fP /PBR) x [(1+DBR)/BR] The following table + * lists the baud rate scaler values. Baud Rate Scaler CTARn[BR] Baud Rate Scaler + * Value 0000 2 0001 4 0010 6 0011 8 0100 16 0101 32 0110 64 0111 128 1000 256 + * 1001 512 1010 1024 1011 2048 1100 4096 1101 8192 1110 16384 1111 32768 + */ +/*@{*/ +#define BP_SPI_CTARn_BR (0U) /*!< Bit position for SPI_CTARn_BR. */ +#define BM_SPI_CTARn_BR (0x0000000FU) /*!< Bit mask for SPI_CTARn_BR. */ +#define BS_SPI_CTARn_BR (4U) /*!< Bit field size in bits for SPI_CTARn_BR. */ + +/*! @brief Read current value of the SPI_CTARn_BR field. */ +#define BR_SPI_CTARn_BR(x, n) (HW_SPI_CTARn(x, n).B.BR) + +/*! @brief Format value for bitfield SPI_CTARn_BR. */ +#define BF_SPI_CTARn_BR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_BR) & BM_SPI_CTARn_BR) + +/*! @brief Set the BR field to a new value. */ +#define BW_SPI_CTARn_BR(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_BR) | BF_SPI_CTARn_BR(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field DT[7:4] (RW) + * + * Selects the Delay after Transfer Scaler. This field is used only in master + * mode. The Delay after Transfer is the time between the negation of the PCS + * signal at the end of a frame and the assertion of PCS at the beginning of the next + * frame. In the Continuous Serial Communications Clock operation, the DT value + * is fixed to one SCK clock period, The Delay after Transfer is a multiple of the + * protocol clock period, and it is computed according to the following + * equation: tDT = (1/fP ) x PDT x DT See Delay Scaler Encoding table in CTARn[CSSCK] bit + * field description for scaler values. + */ +/*@{*/ +#define BP_SPI_CTARn_DT (4U) /*!< Bit position for SPI_CTARn_DT. */ +#define BM_SPI_CTARn_DT (0x000000F0U) /*!< Bit mask for SPI_CTARn_DT. */ +#define BS_SPI_CTARn_DT (4U) /*!< Bit field size in bits for SPI_CTARn_DT. */ + +/*! @brief Read current value of the SPI_CTARn_DT field. */ +#define BR_SPI_CTARn_DT(x, n) (HW_SPI_CTARn(x, n).B.DT) + +/*! @brief Format value for bitfield SPI_CTARn_DT. */ +#define BF_SPI_CTARn_DT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_DT) & BM_SPI_CTARn_DT) + +/*! @brief Set the DT field to a new value. */ +#define BW_SPI_CTARn_DT(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_DT) | BF_SPI_CTARn_DT(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field ASC[11:8] (RW) + * + * Selects the scaler value for the After SCK Delay. This field is used only in + * master mode. The After SCK Delay is the delay between the last edge of SCK and + * the negation of PCS. The delay is a multiple of the protocol clock period, + * and it is computed according to the following equation: t ASC = (1/fP) x PASC x + * ASC See Delay Scaler Encoding table in CTARn[CSSCK] bit field description for + * scaler values. Refer After SCK Delay (tASC ) for more details. + */ +/*@{*/ +#define BP_SPI_CTARn_ASC (8U) /*!< Bit position for SPI_CTARn_ASC. */ +#define BM_SPI_CTARn_ASC (0x00000F00U) /*!< Bit mask for SPI_CTARn_ASC. */ +#define BS_SPI_CTARn_ASC (4U) /*!< Bit field size in bits for SPI_CTARn_ASC. */ + +/*! @brief Read current value of the SPI_CTARn_ASC field. */ +#define BR_SPI_CTARn_ASC(x, n) (HW_SPI_CTARn(x, n).B.ASC) + +/*! @brief Format value for bitfield SPI_CTARn_ASC. */ +#define BF_SPI_CTARn_ASC(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_ASC) & BM_SPI_CTARn_ASC) + +/*! @brief Set the ASC field to a new value. */ +#define BW_SPI_CTARn_ASC(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_ASC) | BF_SPI_CTARn_ASC(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field CSSCK[15:12] (RW) + * + * Selects the scaler value for the PCS to SCK delay. This field is used only in + * master mode. The PCS to SCK Delay is the delay between the assertion of PCS + * and the first edge of the SCK. The delay is a multiple of the protocol clock + * period, and it is computed according to the following equation: t CSC = (1/fP ) + * x PCSSCK x CSSCK. The following table lists the delay scaler values. Delay + * Scaler Encoding Field Value Delay Scaler Value 0000 2 0001 4 0010 8 0011 16 0100 + * 32 0101 64 0110 128 0111 256 1000 512 1001 1024 1010 2048 1011 4096 1100 8192 + * 1101 16384 1110 32768 1111 65536 Refer PCS to SCK Delay (tCSC ) for more + * details. + */ +/*@{*/ +#define BP_SPI_CTARn_CSSCK (12U) /*!< Bit position for SPI_CTARn_CSSCK. */ +#define BM_SPI_CTARn_CSSCK (0x0000F000U) /*!< Bit mask for SPI_CTARn_CSSCK. */ +#define BS_SPI_CTARn_CSSCK (4U) /*!< Bit field size in bits for SPI_CTARn_CSSCK. */ + +/*! @brief Read current value of the SPI_CTARn_CSSCK field. */ +#define BR_SPI_CTARn_CSSCK(x, n) (HW_SPI_CTARn(x, n).B.CSSCK) + +/*! @brief Format value for bitfield SPI_CTARn_CSSCK. */ +#define BF_SPI_CTARn_CSSCK(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CSSCK) & BM_SPI_CTARn_CSSCK) + +/*! @brief Set the CSSCK field to a new value. */ +#define BW_SPI_CTARn_CSSCK(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_CSSCK) | BF_SPI_CTARn_CSSCK(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field PBR[17:16] (RW) + * + * Selects the prescaler value for the baud rate. This field is used only in + * master mode. The baud rate is the frequency of the SCK. The protocol clock is + * divided by the prescaler value before the baud rate selection takes place. See + * the BR field description for details on how to compute the baud rate. + * + * Values: + * - 00 - Baud Rate Prescaler value is 2. + * - 01 - Baud Rate Prescaler value is 3. + * - 10 - Baud Rate Prescaler value is 5. + * - 11 - Baud Rate Prescaler value is 7. + */ +/*@{*/ +#define BP_SPI_CTARn_PBR (16U) /*!< Bit position for SPI_CTARn_PBR. */ +#define BM_SPI_CTARn_PBR (0x00030000U) /*!< Bit mask for SPI_CTARn_PBR. */ +#define BS_SPI_CTARn_PBR (2U) /*!< Bit field size in bits for SPI_CTARn_PBR. */ + +/*! @brief Read current value of the SPI_CTARn_PBR field. */ +#define BR_SPI_CTARn_PBR(x, n) (HW_SPI_CTARn(x, n).B.PBR) + +/*! @brief Format value for bitfield SPI_CTARn_PBR. */ +#define BF_SPI_CTARn_PBR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PBR) & BM_SPI_CTARn_PBR) + +/*! @brief Set the PBR field to a new value. */ +#define BW_SPI_CTARn_PBR(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PBR) | BF_SPI_CTARn_PBR(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field PDT[19:18] (RW) + * + * Selects the prescaler value for the delay between the negation of the PCS + * signal at the end of a frame and the assertion of PCS at the beginning of the + * next frame. The PDT field is only used in master mode. See the DT field + * description for details on how to compute the Delay after Transfer. Refer Delay after + * Transfer (tDT ) for more details. + * + * Values: + * - 00 - Delay after Transfer Prescaler value is 1. + * - 01 - Delay after Transfer Prescaler value is 3. + * - 10 - Delay after Transfer Prescaler value is 5. + * - 11 - Delay after Transfer Prescaler value is 7. + */ +/*@{*/ +#define BP_SPI_CTARn_PDT (18U) /*!< Bit position for SPI_CTARn_PDT. */ +#define BM_SPI_CTARn_PDT (0x000C0000U) /*!< Bit mask for SPI_CTARn_PDT. */ +#define BS_SPI_CTARn_PDT (2U) /*!< Bit field size in bits for SPI_CTARn_PDT. */ + +/*! @brief Read current value of the SPI_CTARn_PDT field. */ +#define BR_SPI_CTARn_PDT(x, n) (HW_SPI_CTARn(x, n).B.PDT) + +/*! @brief Format value for bitfield SPI_CTARn_PDT. */ +#define BF_SPI_CTARn_PDT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PDT) & BM_SPI_CTARn_PDT) + +/*! @brief Set the PDT field to a new value. */ +#define BW_SPI_CTARn_PDT(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PDT) | BF_SPI_CTARn_PDT(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field PASC[21:20] (RW) + * + * Selects the prescaler value for the delay between the last edge of SCK and + * the negation of PCS. See the ASC field description for information on how to + * compute the After SCK Delay. Refer After SCK Delay (tASC ) for more details. + * + * Values: + * - 00 - Delay after Transfer Prescaler value is 1. + * - 01 - Delay after Transfer Prescaler value is 3. + * - 10 - Delay after Transfer Prescaler value is 5. + * - 11 - Delay after Transfer Prescaler value is 7. + */ +/*@{*/ +#define BP_SPI_CTARn_PASC (20U) /*!< Bit position for SPI_CTARn_PASC. */ +#define BM_SPI_CTARn_PASC (0x00300000U) /*!< Bit mask for SPI_CTARn_PASC. */ +#define BS_SPI_CTARn_PASC (2U) /*!< Bit field size in bits for SPI_CTARn_PASC. */ + +/*! @brief Read current value of the SPI_CTARn_PASC field. */ +#define BR_SPI_CTARn_PASC(x, n) (HW_SPI_CTARn(x, n).B.PASC) + +/*! @brief Format value for bitfield SPI_CTARn_PASC. */ +#define BF_SPI_CTARn_PASC(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PASC) & BM_SPI_CTARn_PASC) + +/*! @brief Set the PASC field to a new value. */ +#define BW_SPI_CTARn_PASC(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PASC) | BF_SPI_CTARn_PASC(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field PCSSCK[23:22] (RW) + * + * Selects the prescaler value for the delay between assertion of PCS and the + * first edge of the SCK. See the CSSCK field description for information on how to + * compute the PCS to SCK Delay. Refer PCS to SCK Delay (tCSC ) for more details. + * + * Values: + * - 00 - PCS to SCK Prescaler value is 1. + * - 01 - PCS to SCK Prescaler value is 3. + * - 10 - PCS to SCK Prescaler value is 5. + * - 11 - PCS to SCK Prescaler value is 7. + */ +/*@{*/ +#define BP_SPI_CTARn_PCSSCK (22U) /*!< Bit position for SPI_CTARn_PCSSCK. */ +#define BM_SPI_CTARn_PCSSCK (0x00C00000U) /*!< Bit mask for SPI_CTARn_PCSSCK. */ +#define BS_SPI_CTARn_PCSSCK (2U) /*!< Bit field size in bits for SPI_CTARn_PCSSCK. */ + +/*! @brief Read current value of the SPI_CTARn_PCSSCK field. */ +#define BR_SPI_CTARn_PCSSCK(x, n) (HW_SPI_CTARn(x, n).B.PCSSCK) + +/*! @brief Format value for bitfield SPI_CTARn_PCSSCK. */ +#define BF_SPI_CTARn_PCSSCK(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PCSSCK) & BM_SPI_CTARn_PCSSCK) + +/*! @brief Set the PCSSCK field to a new value. */ +#define BW_SPI_CTARn_PCSSCK(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PCSSCK) | BF_SPI_CTARn_PCSSCK(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field LSBFE[24] (RW) + * + * Specifies whether the LSB or MSB of the frame is transferred first. + * + * Values: + * - 0 - Data is transferred MSB first. + * - 1 - Data is transferred LSB first. + */ +/*@{*/ +#define BP_SPI_CTARn_LSBFE (24U) /*!< Bit position for SPI_CTARn_LSBFE. */ +#define BM_SPI_CTARn_LSBFE (0x01000000U) /*!< Bit mask for SPI_CTARn_LSBFE. */ +#define BS_SPI_CTARn_LSBFE (1U) /*!< Bit field size in bits for SPI_CTARn_LSBFE. */ + +/*! @brief Read current value of the SPI_CTARn_LSBFE field. */ +#define BR_SPI_CTARn_LSBFE(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_LSBFE)) + +/*! @brief Format value for bitfield SPI_CTARn_LSBFE. */ +#define BF_SPI_CTARn_LSBFE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_LSBFE) & BM_SPI_CTARn_LSBFE) + +/*! @brief Set the LSBFE field to a new value. */ +#define BW_SPI_CTARn_LSBFE(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_LSBFE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field CPHA[25] (RW) + * + * Selects which edge of SCK causes data to change and which edge causes data to + * be captured. This bit is used in both master and slave mode. For successful + * communication between serial devices, the devices must have identical clock + * phase settings. In Continuous SCK mode, the bit value is ignored and the + * transfers are done as if the CPHA bit is set to 1. + * + * Values: + * - 0 - Data is captured on the leading edge of SCK and changed on the + * following edge. + * - 1 - Data is changed on the leading edge of SCK and captured on the + * following edge. + */ +/*@{*/ +#define BP_SPI_CTARn_CPHA (25U) /*!< Bit position for SPI_CTARn_CPHA. */ +#define BM_SPI_CTARn_CPHA (0x02000000U) /*!< Bit mask for SPI_CTARn_CPHA. */ +#define BS_SPI_CTARn_CPHA (1U) /*!< Bit field size in bits for SPI_CTARn_CPHA. */ + +/*! @brief Read current value of the SPI_CTARn_CPHA field. */ +#define BR_SPI_CTARn_CPHA(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPHA)) + +/*! @brief Format value for bitfield SPI_CTARn_CPHA. */ +#define BF_SPI_CTARn_CPHA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CPHA) & BM_SPI_CTARn_CPHA) + +/*! @brief Set the CPHA field to a new value. */ +#define BW_SPI_CTARn_CPHA(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPHA) = (v)) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field CPOL[26] (RW) + * + * Selects the inactive state of the Serial Communications Clock (SCK). This bit + * is used in both master and slave mode. For successful communication between + * serial devices, the devices must have identical clock polarities. When the + * Continuous Selection Format is selected, switching between clock polarities + * without stopping the module can cause errors in the transfer due to the peripheral + * device interpreting the switch of clock polarity as a valid clock edge. In case + * of continous sck mode, when the module goes in low power mode(disabled), + * inactive state of sck is not guaranted. + * + * Values: + * - 0 - The inactive state value of SCK is low. + * - 1 - The inactive state value of SCK is high. + */ +/*@{*/ +#define BP_SPI_CTARn_CPOL (26U) /*!< Bit position for SPI_CTARn_CPOL. */ +#define BM_SPI_CTARn_CPOL (0x04000000U) /*!< Bit mask for SPI_CTARn_CPOL. */ +#define BS_SPI_CTARn_CPOL (1U) /*!< Bit field size in bits for SPI_CTARn_CPOL. */ + +/*! @brief Read current value of the SPI_CTARn_CPOL field. */ +#define BR_SPI_CTARn_CPOL(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPOL)) + +/*! @brief Format value for bitfield SPI_CTARn_CPOL. */ +#define BF_SPI_CTARn_CPOL(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CPOL) & BM_SPI_CTARn_CPOL) + +/*! @brief Set the CPOL field to a new value. */ +#define BW_SPI_CTARn_CPOL(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPOL) = (v)) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field FMSZ[30:27] (RW) + * + * The number of bits transferred per frame is equal to the FMSZ value plus 1. + * Regardless of the transmission mode, the minimum valid frame size value is 4. + */ +/*@{*/ +#define BP_SPI_CTARn_FMSZ (27U) /*!< Bit position for SPI_CTARn_FMSZ. */ +#define BM_SPI_CTARn_FMSZ (0x78000000U) /*!< Bit mask for SPI_CTARn_FMSZ. */ +#define BS_SPI_CTARn_FMSZ (4U) /*!< Bit field size in bits for SPI_CTARn_FMSZ. */ + +/*! @brief Read current value of the SPI_CTARn_FMSZ field. */ +#define BR_SPI_CTARn_FMSZ(x, n) (HW_SPI_CTARn(x, n).B.FMSZ) + +/*! @brief Format value for bitfield SPI_CTARn_FMSZ. */ +#define BF_SPI_CTARn_FMSZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_FMSZ) & BM_SPI_CTARn_FMSZ) + +/*! @brief Set the FMSZ field to a new value. */ +#define BW_SPI_CTARn_FMSZ(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_FMSZ) | BF_SPI_CTARn_FMSZ(v))) +/*@}*/ + +/*! + * @name Register SPI_CTARn, field DBR[31] (RW) + * + * Doubles the effective baud rate of the Serial Communications Clock (SCK). + * This field is used only in master mode. It effectively halves the Baud Rate + * division ratio, supporting faster frequencies, and odd division ratios for the + * Serial Communications Clock (SCK). When the DBR bit is set, the duty cycle of the + * Serial Communications Clock (SCK) depends on the value in the Baud Rate + * Prescaler and the Clock Phase bit as listed in the following table. See the BR field + * description for details on how to compute the baud rate. SPI SCK Duty Cycle + * DBR CPHA PBR SCK Duty Cycle 0 any any 50/50 1 0 00 50/50 1 0 01 33/66 1 0 10 + * 40/60 1 0 11 43/57 1 1 00 50/50 1 1 01 66/33 1 1 10 60/40 1 1 11 57/43 + * + * Values: + * - 0 - The baud rate is computed normally with a 50/50 duty cycle. + * - 1 - The baud rate is doubled with the duty cycle depending on the Baud Rate + * Prescaler. + */ +/*@{*/ +#define BP_SPI_CTARn_DBR (31U) /*!< Bit position for SPI_CTARn_DBR. */ +#define BM_SPI_CTARn_DBR (0x80000000U) /*!< Bit mask for SPI_CTARn_DBR. */ +#define BS_SPI_CTARn_DBR (1U) /*!< Bit field size in bits for SPI_CTARn_DBR. */ + +/*! @brief Read current value of the SPI_CTARn_DBR field. */ +#define BR_SPI_CTARn_DBR(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_DBR)) + +/*! @brief Format value for bitfield SPI_CTARn_DBR. */ +#define BF_SPI_CTARn_DBR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_DBR) & BM_SPI_CTARn_DBR) + +/*! @brief Set the DBR field to a new value. */ +#define BW_SPI_CTARn_DBR(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_DBR) = (v)) +/*@}*/ +/******************************************************************************* + * HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode) + ******************************************************************************/ + +/*! + * @brief HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode) (RW) + * + * Reset value: 0x78000000U + * + * When the module is configured as an SPI bus slave, the CTAR0 register is used. + */ +typedef union _hw_spi_ctarn_slave +{ + uint32_t U; + struct _hw_spi_ctarn_slave_bitfields + { + uint32_t RESERVED0 : 25; /*!< [24:0] */ + uint32_t CPHA : 1; /*!< [25] Clock Phase */ + uint32_t CPOL : 1; /*!< [26] Clock Polarity */ + uint32_t FMSZ : 5; /*!< [31:27] Frame Size */ + } B; +} hw_spi_ctarn_slave_t; + +/*! + * @name Constants and macros for entire SPI_CTARn_SLAVE register + */ +/*@{*/ +#define HW_SPI_CTARn_SLAVE_COUNT (1U) + +#define HW_SPI_CTARn_SLAVE_ADDR(x, n) ((x) + 0xCU + (0x4U * (n))) + +#define HW_SPI_CTARn_SLAVE(x, n) (*(__IO hw_spi_ctarn_slave_t *) HW_SPI_CTARn_SLAVE_ADDR(x, n)) +#define HW_SPI_CTARn_SLAVE_RD(x, n) (HW_SPI_CTARn_SLAVE(x, n).U) +#define HW_SPI_CTARn_SLAVE_WR(x, n, v) (HW_SPI_CTARn_SLAVE(x, n).U = (v)) +#define HW_SPI_CTARn_SLAVE_SET(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) | (v))) +#define HW_SPI_CTARn_SLAVE_CLR(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) & ~(v))) +#define HW_SPI_CTARn_SLAVE_TOG(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_CTARn_SLAVE bitfields + */ + +/*! + * @name Register SPI_CTARn_SLAVE, field CPHA[25] (RW) + * + * Selects which edge of SCK causes data to change and which edge causes data to + * be captured. This bit is used in both master and slave mode. For successful + * communication between serial devices, the devices must have identical clock + * phase settings. In Continuous SCK mode, the bit value is ignored and the + * transfers are done as if the CPHA bit is set to 1. + * + * Values: + * - 0 - Data is captured on the leading edge of SCK and changed on the + * following edge. + * - 1 - Data is changed on the leading edge of SCK and captured on the + * following edge. + */ +/*@{*/ +#define BP_SPI_CTARn_SLAVE_CPHA (25U) /*!< Bit position for SPI_CTARn_SLAVE_CPHA. */ +#define BM_SPI_CTARn_SLAVE_CPHA (0x02000000U) /*!< Bit mask for SPI_CTARn_SLAVE_CPHA. */ +#define BS_SPI_CTARn_SLAVE_CPHA (1U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_CPHA. */ + +/*! @brief Read current value of the SPI_CTARn_SLAVE_CPHA field. */ +#define BR_SPI_CTARn_SLAVE_CPHA(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPHA)) + +/*! @brief Format value for bitfield SPI_CTARn_SLAVE_CPHA. */ +#define BF_SPI_CTARn_SLAVE_CPHA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_CPHA) & BM_SPI_CTARn_SLAVE_CPHA) + +/*! @brief Set the CPHA field to a new value. */ +#define BW_SPI_CTARn_SLAVE_CPHA(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPHA) = (v)) +/*@}*/ + +/*! + * @name Register SPI_CTARn_SLAVE, field CPOL[26] (RW) + * + * Selects the inactive state of the Serial Communications Clock (SCK). In case + * of continous sck mode, when the module goes in low power mode(disabled), + * inactive state of sck is not guaranted. + * + * Values: + * - 0 - The inactive state value of SCK is low. + * - 1 - The inactive state value of SCK is high. + */ +/*@{*/ +#define BP_SPI_CTARn_SLAVE_CPOL (26U) /*!< Bit position for SPI_CTARn_SLAVE_CPOL. */ +#define BM_SPI_CTARn_SLAVE_CPOL (0x04000000U) /*!< Bit mask for SPI_CTARn_SLAVE_CPOL. */ +#define BS_SPI_CTARn_SLAVE_CPOL (1U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_CPOL. */ + +/*! @brief Read current value of the SPI_CTARn_SLAVE_CPOL field. */ +#define BR_SPI_CTARn_SLAVE_CPOL(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPOL)) + +/*! @brief Format value for bitfield SPI_CTARn_SLAVE_CPOL. */ +#define BF_SPI_CTARn_SLAVE_CPOL(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_CPOL) & BM_SPI_CTARn_SLAVE_CPOL) + +/*! @brief Set the CPOL field to a new value. */ +#define BW_SPI_CTARn_SLAVE_CPOL(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPOL) = (v)) +/*@}*/ + +/*! + * @name Register SPI_CTARn_SLAVE, field FMSZ[31:27] (RW) + * + * The number of bits transfered per frame is equal to the FMSZ field value plus + * 1. Note that the minimum valid value of frame size is 4. + */ +/*@{*/ +#define BP_SPI_CTARn_SLAVE_FMSZ (27U) /*!< Bit position for SPI_CTARn_SLAVE_FMSZ. */ +#define BM_SPI_CTARn_SLAVE_FMSZ (0xF8000000U) /*!< Bit mask for SPI_CTARn_SLAVE_FMSZ. */ +#define BS_SPI_CTARn_SLAVE_FMSZ (5U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_FMSZ. */ + +/*! @brief Read current value of the SPI_CTARn_SLAVE_FMSZ field. */ +#define BR_SPI_CTARn_SLAVE_FMSZ(x, n) (HW_SPI_CTARn_SLAVE(x, n).B.FMSZ) + +/*! @brief Format value for bitfield SPI_CTARn_SLAVE_FMSZ. */ +#define BF_SPI_CTARn_SLAVE_FMSZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_FMSZ) & BM_SPI_CTARn_SLAVE_FMSZ) + +/*! @brief Set the FMSZ field to a new value. */ +#define BW_SPI_CTARn_SLAVE_FMSZ(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, (HW_SPI_CTARn_SLAVE_RD(x, n) & ~BM_SPI_CTARn_SLAVE_FMSZ) | BF_SPI_CTARn_SLAVE_FMSZ(v))) +/*@}*/ + +/******************************************************************************* + * HW_SPI_SR - Status Register + ******************************************************************************/ + +/*! + * @brief HW_SPI_SR - Status Register (RW) + * + * Reset value: 0x02000000U + * + * SR contains status and flag bits. The bits reflect the status of the module + * and indicate the occurrence of events that can generate interrupt or DMA + * requests. Software can clear flag bits in the SR by writing a 1 to them. Writing a 0 + * to a flag bit has no effect. This register may not be writable in Module + * Disable mode due to the use of power saving mechanisms. + */ +typedef union _hw_spi_sr +{ + uint32_t U; + struct _hw_spi_sr_bitfields + { + uint32_t POPNXTPTR : 4; /*!< [3:0] Pop Next Pointer */ + uint32_t RXCTR : 4; /*!< [7:4] RX FIFO Counter */ + uint32_t TXNXTPTR : 4; /*!< [11:8] Transmit Next Pointer */ + uint32_t TXCTR : 4; /*!< [15:12] TX FIFO Counter */ + uint32_t RESERVED0 : 1; /*!< [16] */ + uint32_t RFDF : 1; /*!< [17] Receive FIFO Drain Flag */ + uint32_t RESERVED1 : 1; /*!< [18] */ + uint32_t RFOF : 1; /*!< [19] Receive FIFO Overflow Flag */ + uint32_t RESERVED2 : 5; /*!< [24:20] */ + uint32_t TFFF : 1; /*!< [25] Transmit FIFO Fill Flag */ + uint32_t RESERVED3 : 1; /*!< [26] */ + uint32_t TFUF : 1; /*!< [27] Transmit FIFO Underflow Flag */ + uint32_t EOQF : 1; /*!< [28] End of Queue Flag */ + uint32_t RESERVED4 : 1; /*!< [29] */ + uint32_t TXRXS : 1; /*!< [30] TX and RX Status */ + uint32_t TCF : 1; /*!< [31] Transfer Complete Flag */ + } B; +} hw_spi_sr_t; + +/*! + * @name Constants and macros for entire SPI_SR register + */ +/*@{*/ +#define HW_SPI_SR_ADDR(x) ((x) + 0x2CU) + +#define HW_SPI_SR(x) (*(__IO hw_spi_sr_t *) HW_SPI_SR_ADDR(x)) +#define HW_SPI_SR_RD(x) (HW_SPI_SR(x).U) +#define HW_SPI_SR_WR(x, v) (HW_SPI_SR(x).U = (v)) +#define HW_SPI_SR_SET(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) | (v))) +#define HW_SPI_SR_CLR(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) & ~(v))) +#define HW_SPI_SR_TOG(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_SR bitfields + */ + +/*! + * @name Register SPI_SR, field POPNXTPTR[3:0] (RO) + * + * Contains a pointer to the RX FIFO entry to be returned when the POPR is read. + * The POPNXTPTR is updated when the POPR is read. + */ +/*@{*/ +#define BP_SPI_SR_POPNXTPTR (0U) /*!< Bit position for SPI_SR_POPNXTPTR. */ +#define BM_SPI_SR_POPNXTPTR (0x0000000FU) /*!< Bit mask for SPI_SR_POPNXTPTR. */ +#define BS_SPI_SR_POPNXTPTR (4U) /*!< Bit field size in bits for SPI_SR_POPNXTPTR. */ + +/*! @brief Read current value of the SPI_SR_POPNXTPTR field. */ +#define BR_SPI_SR_POPNXTPTR(x) (HW_SPI_SR(x).B.POPNXTPTR) +/*@}*/ + +/*! + * @name Register SPI_SR, field RXCTR[7:4] (RO) + * + * Indicates the number of entries in the RX FIFO. The RXCTR is decremented + * every time the POPR is read. The RXCTR is incremented every time data is + * transferred from the shift register to the RX FIFO. + */ +/*@{*/ +#define BP_SPI_SR_RXCTR (4U) /*!< Bit position for SPI_SR_RXCTR. */ +#define BM_SPI_SR_RXCTR (0x000000F0U) /*!< Bit mask for SPI_SR_RXCTR. */ +#define BS_SPI_SR_RXCTR (4U) /*!< Bit field size in bits for SPI_SR_RXCTR. */ + +/*! @brief Read current value of the SPI_SR_RXCTR field. */ +#define BR_SPI_SR_RXCTR(x) (HW_SPI_SR(x).B.RXCTR) +/*@}*/ + +/*! + * @name Register SPI_SR, field TXNXTPTR[11:8] (RO) + * + * Indicates which TX FIFO entry is transmitted during the next transfer. The + * TXNXTPTR field is updated every time SPI data is transferred from the TX FIFO to + * the shift register. + */ +/*@{*/ +#define BP_SPI_SR_TXNXTPTR (8U) /*!< Bit position for SPI_SR_TXNXTPTR. */ +#define BM_SPI_SR_TXNXTPTR (0x00000F00U) /*!< Bit mask for SPI_SR_TXNXTPTR. */ +#define BS_SPI_SR_TXNXTPTR (4U) /*!< Bit field size in bits for SPI_SR_TXNXTPTR. */ + +/*! @brief Read current value of the SPI_SR_TXNXTPTR field. */ +#define BR_SPI_SR_TXNXTPTR(x) (HW_SPI_SR(x).B.TXNXTPTR) +/*@}*/ + +/*! + * @name Register SPI_SR, field TXCTR[15:12] (RO) + * + * Indicates the number of valid entries in the TX FIFO. The TXCTR is + * incremented every time the PUSHR is written. The TXCTR is decremented every time an SPI + * command is executed and the SPI data is transferred to the shift register. + */ +/*@{*/ +#define BP_SPI_SR_TXCTR (12U) /*!< Bit position for SPI_SR_TXCTR. */ +#define BM_SPI_SR_TXCTR (0x0000F000U) /*!< Bit mask for SPI_SR_TXCTR. */ +#define BS_SPI_SR_TXCTR (4U) /*!< Bit field size in bits for SPI_SR_TXCTR. */ + +/*! @brief Read current value of the SPI_SR_TXCTR field. */ +#define BR_SPI_SR_TXCTR(x) (HW_SPI_SR(x).B.TXCTR) +/*@}*/ + +/*! + * @name Register SPI_SR, field RFDF[17] (W1C) + * + * Provides a method for the module to request that entries be removed from the + * RX FIFO. The bit is set while the RX FIFO is not empty. The RFDF bit can be + * cleared by writing 1 to it or by acknowledgement from the DMA controller when + * the RX FIFO is empty. + * + * Values: + * - 0 - RX FIFO is empty. + * - 1 - RX FIFO is not empty. + */ +/*@{*/ +#define BP_SPI_SR_RFDF (17U) /*!< Bit position for SPI_SR_RFDF. */ +#define BM_SPI_SR_RFDF (0x00020000U) /*!< Bit mask for SPI_SR_RFDF. */ +#define BS_SPI_SR_RFDF (1U) /*!< Bit field size in bits for SPI_SR_RFDF. */ + +/*! @brief Read current value of the SPI_SR_RFDF field. */ +#define BR_SPI_SR_RFDF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFDF)) + +/*! @brief Format value for bitfield SPI_SR_RFDF. */ +#define BF_SPI_SR_RFDF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_RFDF) & BM_SPI_SR_RFDF) + +/*! @brief Set the RFDF field to a new value. */ +#define BW_SPI_SR_RFDF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFDF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field RFOF[19] (W1C) + * + * Indicates an overflow condition in the RX FIFO. The field is set when the RX + * FIFO and shift register are full and a transfer is initiated. The bit remains + * set until it is cleared by writing a 1 to it. + * + * Values: + * - 0 - No Rx FIFO overflow. + * - 1 - Rx FIFO overflow has occurred. + */ +/*@{*/ +#define BP_SPI_SR_RFOF (19U) /*!< Bit position for SPI_SR_RFOF. */ +#define BM_SPI_SR_RFOF (0x00080000U) /*!< Bit mask for SPI_SR_RFOF. */ +#define BS_SPI_SR_RFOF (1U) /*!< Bit field size in bits for SPI_SR_RFOF. */ + +/*! @brief Read current value of the SPI_SR_RFOF field. */ +#define BR_SPI_SR_RFOF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFOF)) + +/*! @brief Format value for bitfield SPI_SR_RFOF. */ +#define BF_SPI_SR_RFOF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_RFOF) & BM_SPI_SR_RFOF) + +/*! @brief Set the RFOF field to a new value. */ +#define BW_SPI_SR_RFOF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFOF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field TFFF[25] (W1C) + * + * Provides a method for the module to request more entries to be added to the + * TX FIFO. The TFFF bit is set while the TX FIFO is not full. The TFFF bit can be + * cleared by writing 1 to it or by acknowledgement from the DMA controller to + * the TX FIFO full request. + * + * Values: + * - 0 - TX FIFO is full. + * - 1 - TX FIFO is not full. + */ +/*@{*/ +#define BP_SPI_SR_TFFF (25U) /*!< Bit position for SPI_SR_TFFF. */ +#define BM_SPI_SR_TFFF (0x02000000U) /*!< Bit mask for SPI_SR_TFFF. */ +#define BS_SPI_SR_TFFF (1U) /*!< Bit field size in bits for SPI_SR_TFFF. */ + +/*! @brief Read current value of the SPI_SR_TFFF field. */ +#define BR_SPI_SR_TFFF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFFF)) + +/*! @brief Format value for bitfield SPI_SR_TFFF. */ +#define BF_SPI_SR_TFFF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TFFF) & BM_SPI_SR_TFFF) + +/*! @brief Set the TFFF field to a new value. */ +#define BW_SPI_SR_TFFF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFFF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field TFUF[27] (W1C) + * + * Indicates an underflow condition in the TX FIFO. The transmit underflow + * condition is detected only for SPI blocks operating in Slave mode and SPI + * configuration. TFUF is set when the TX FIFO of the module operating in SPI Slave mode + * is empty and an external SPI master initiates a transfer. The TFUF bit remains + * set until cleared by writing 1 to it. + * + * Values: + * - 0 - No TX FIFO underflow. + * - 1 - TX FIFO underflow has occurred. + */ +/*@{*/ +#define BP_SPI_SR_TFUF (27U) /*!< Bit position for SPI_SR_TFUF. */ +#define BM_SPI_SR_TFUF (0x08000000U) /*!< Bit mask for SPI_SR_TFUF. */ +#define BS_SPI_SR_TFUF (1U) /*!< Bit field size in bits for SPI_SR_TFUF. */ + +/*! @brief Read current value of the SPI_SR_TFUF field. */ +#define BR_SPI_SR_TFUF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFUF)) + +/*! @brief Format value for bitfield SPI_SR_TFUF. */ +#define BF_SPI_SR_TFUF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TFUF) & BM_SPI_SR_TFUF) + +/*! @brief Set the TFUF field to a new value. */ +#define BW_SPI_SR_TFUF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFUF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field EOQF[28] (W1C) + * + * Indicates that the last entry in a queue has been transmitted when the module + * is in Master mode. The EOQF bit is set when the TX FIFO entry has the EOQ bit + * set in the command halfword and the end of the transfer is reached. The EOQF + * bit remains set until cleared by writing a 1 to it. When the EOQF bit is set, + * the TXRXS bit is automatically cleared. + * + * Values: + * - 0 - EOQ is not set in the executing command. + * - 1 - EOQ is set in the executing SPI command. + */ +/*@{*/ +#define BP_SPI_SR_EOQF (28U) /*!< Bit position for SPI_SR_EOQF. */ +#define BM_SPI_SR_EOQF (0x10000000U) /*!< Bit mask for SPI_SR_EOQF. */ +#define BS_SPI_SR_EOQF (1U) /*!< Bit field size in bits for SPI_SR_EOQF. */ + +/*! @brief Read current value of the SPI_SR_EOQF field. */ +#define BR_SPI_SR_EOQF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_EOQF)) + +/*! @brief Format value for bitfield SPI_SR_EOQF. */ +#define BF_SPI_SR_EOQF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_EOQF) & BM_SPI_SR_EOQF) + +/*! @brief Set the EOQF field to a new value. */ +#define BW_SPI_SR_EOQF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_EOQF) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field TXRXS[30] (W1C) + * + * Reflects the run status of the module. + * + * Values: + * - 0 - Transmit and receive operations are disabled (The module is in Stopped + * state). + * - 1 - Transmit and receive operations are enabled (The module is in Running + * state). + */ +/*@{*/ +#define BP_SPI_SR_TXRXS (30U) /*!< Bit position for SPI_SR_TXRXS. */ +#define BM_SPI_SR_TXRXS (0x40000000U) /*!< Bit mask for SPI_SR_TXRXS. */ +#define BS_SPI_SR_TXRXS (1U) /*!< Bit field size in bits for SPI_SR_TXRXS. */ + +/*! @brief Read current value of the SPI_SR_TXRXS field. */ +#define BR_SPI_SR_TXRXS(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TXRXS)) + +/*! @brief Format value for bitfield SPI_SR_TXRXS. */ +#define BF_SPI_SR_TXRXS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TXRXS) & BM_SPI_SR_TXRXS) + +/*! @brief Set the TXRXS field to a new value. */ +#define BW_SPI_SR_TXRXS(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TXRXS) = (v)) +/*@}*/ + +/*! + * @name Register SPI_SR, field TCF[31] (W1C) + * + * Indicates that all bits in a frame have been shifted out. TCF remains set + * until it is cleared by writing a 1 to it. + * + * Values: + * - 0 - Transfer not complete. + * - 1 - Transfer complete. + */ +/*@{*/ +#define BP_SPI_SR_TCF (31U) /*!< Bit position for SPI_SR_TCF. */ +#define BM_SPI_SR_TCF (0x80000000U) /*!< Bit mask for SPI_SR_TCF. */ +#define BS_SPI_SR_TCF (1U) /*!< Bit field size in bits for SPI_SR_TCF. */ + +/*! @brief Read current value of the SPI_SR_TCF field. */ +#define BR_SPI_SR_TCF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TCF)) + +/*! @brief Format value for bitfield SPI_SR_TCF. */ +#define BF_SPI_SR_TCF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TCF) & BM_SPI_SR_TCF) + +/*! @brief Set the TCF field to a new value. */ +#define BW_SPI_SR_TCF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TCF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register + ******************************************************************************/ + +/*! + * @brief HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register (RW) + * + * Reset value: 0x00000000U + * + * RSER controls DMA and interrupt requests. Do not write to the RSER while the + * module is in the Running state. + */ +typedef union _hw_spi_rser +{ + uint32_t U; + struct _hw_spi_rser_bitfields + { + uint32_t RESERVED0 : 16; /*!< [15:0] */ + uint32_t RFDF_DIRS : 1; /*!< [16] Receive FIFO Drain DMA or Interrupt + * Request Select */ + uint32_t RFDF_RE : 1; /*!< [17] Receive FIFO Drain Request Enable */ + uint32_t RESERVED1 : 1; /*!< [18] */ + uint32_t RFOF_RE : 1; /*!< [19] Receive FIFO Overflow Request Enable + * */ + uint32_t RESERVED2 : 4; /*!< [23:20] */ + uint32_t TFFF_DIRS : 1; /*!< [24] Transmit FIFO Fill DMA or Interrupt + * Request Select */ + uint32_t TFFF_RE : 1; /*!< [25] Transmit FIFO Fill Request Enable */ + uint32_t RESERVED3 : 1; /*!< [26] */ + uint32_t TFUF_RE : 1; /*!< [27] Transmit FIFO Underflow Request + * Enable */ + uint32_t EOQF_RE : 1; /*!< [28] Finished Request Enable */ + uint32_t RESERVED4 : 2; /*!< [30:29] */ + uint32_t TCF_RE : 1; /*!< [31] Transmission Complete Request Enable */ + } B; +} hw_spi_rser_t; + +/*! + * @name Constants and macros for entire SPI_RSER register + */ +/*@{*/ +#define HW_SPI_RSER_ADDR(x) ((x) + 0x30U) + +#define HW_SPI_RSER(x) (*(__IO hw_spi_rser_t *) HW_SPI_RSER_ADDR(x)) +#define HW_SPI_RSER_RD(x) (HW_SPI_RSER(x).U) +#define HW_SPI_RSER_WR(x, v) (HW_SPI_RSER(x).U = (v)) +#define HW_SPI_RSER_SET(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) | (v))) +#define HW_SPI_RSER_CLR(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) & ~(v))) +#define HW_SPI_RSER_TOG(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_RSER bitfields + */ + +/*! + * @name Register SPI_RSER, field RFDF_DIRS[16] (RW) + * + * Selects between generating a DMA request or an interrupt request. When the + * RFDF flag bit in the SR is set, and the RFDF_RE bit in the RSER is set, the + * RFDF_DIRS bit selects between generating an interrupt request or a DMA request. + * + * Values: + * - 0 - Interrupt request. + * - 1 - DMA request. + */ +/*@{*/ +#define BP_SPI_RSER_RFDF_DIRS (16U) /*!< Bit position for SPI_RSER_RFDF_DIRS. */ +#define BM_SPI_RSER_RFDF_DIRS (0x00010000U) /*!< Bit mask for SPI_RSER_RFDF_DIRS. */ +#define BS_SPI_RSER_RFDF_DIRS (1U) /*!< Bit field size in bits for SPI_RSER_RFDF_DIRS. */ + +/*! @brief Read current value of the SPI_RSER_RFDF_DIRS field. */ +#define BR_SPI_RSER_RFDF_DIRS(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_DIRS)) + +/*! @brief Format value for bitfield SPI_RSER_RFDF_DIRS. */ +#define BF_SPI_RSER_RFDF_DIRS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFDF_DIRS) & BM_SPI_RSER_RFDF_DIRS) + +/*! @brief Set the RFDF_DIRS field to a new value. */ +#define BW_SPI_RSER_RFDF_DIRS(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_DIRS) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field RFDF_RE[17] (RW) + * + * Enables the RFDF flag in the SR to generate a request. The RFDF_DIRS bit + * selects between generating an interrupt request or a DMA request. + * + * Values: + * - 0 - RFDF interrupt or DMA requests are disabled. + * - 1 - RFDF interrupt or DMA requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_RFDF_RE (17U) /*!< Bit position for SPI_RSER_RFDF_RE. */ +#define BM_SPI_RSER_RFDF_RE (0x00020000U) /*!< Bit mask for SPI_RSER_RFDF_RE. */ +#define BS_SPI_RSER_RFDF_RE (1U) /*!< Bit field size in bits for SPI_RSER_RFDF_RE. */ + +/*! @brief Read current value of the SPI_RSER_RFDF_RE field. */ +#define BR_SPI_RSER_RFDF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_RFDF_RE. */ +#define BF_SPI_RSER_RFDF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFDF_RE) & BM_SPI_RSER_RFDF_RE) + +/*! @brief Set the RFDF_RE field to a new value. */ +#define BW_SPI_RSER_RFDF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_RE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field RFOF_RE[19] (RW) + * + * Enables the RFOF flag in the SR to generate an interrupt request. + * + * Values: + * - 0 - RFOF interrupt requests are disabled. + * - 1 - RFOF interrupt requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_RFOF_RE (19U) /*!< Bit position for SPI_RSER_RFOF_RE. */ +#define BM_SPI_RSER_RFOF_RE (0x00080000U) /*!< Bit mask for SPI_RSER_RFOF_RE. */ +#define BS_SPI_RSER_RFOF_RE (1U) /*!< Bit field size in bits for SPI_RSER_RFOF_RE. */ + +/*! @brief Read current value of the SPI_RSER_RFOF_RE field. */ +#define BR_SPI_RSER_RFOF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFOF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_RFOF_RE. */ +#define BF_SPI_RSER_RFOF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFOF_RE) & BM_SPI_RSER_RFOF_RE) + +/*! @brief Set the RFOF_RE field to a new value. */ +#define BW_SPI_RSER_RFOF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFOF_RE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field TFFF_DIRS[24] (RW) + * + * Selects between generating a DMA request or an interrupt request. When + * SR[TFFF] and RSER[TFFF_RE] are set, this field selects between generating an + * interrupt request or a DMA request. + * + * Values: + * - 0 - TFFF flag generates interrupt requests. + * - 1 - TFFF flag generates DMA requests. + */ +/*@{*/ +#define BP_SPI_RSER_TFFF_DIRS (24U) /*!< Bit position for SPI_RSER_TFFF_DIRS. */ +#define BM_SPI_RSER_TFFF_DIRS (0x01000000U) /*!< Bit mask for SPI_RSER_TFFF_DIRS. */ +#define BS_SPI_RSER_TFFF_DIRS (1U) /*!< Bit field size in bits for SPI_RSER_TFFF_DIRS. */ + +/*! @brief Read current value of the SPI_RSER_TFFF_DIRS field. */ +#define BR_SPI_RSER_TFFF_DIRS(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_DIRS)) + +/*! @brief Format value for bitfield SPI_RSER_TFFF_DIRS. */ +#define BF_SPI_RSER_TFFF_DIRS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFFF_DIRS) & BM_SPI_RSER_TFFF_DIRS) + +/*! @brief Set the TFFF_DIRS field to a new value. */ +#define BW_SPI_RSER_TFFF_DIRS(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_DIRS) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field TFFF_RE[25] (RW) + * + * Enables the TFFF flag in the SR to generate a request. The TFFF_DIRS bit + * selects between generating an interrupt request or a DMA request. + * + * Values: + * - 0 - TFFF interrupts or DMA requests are disabled. + * - 1 - TFFF interrupts or DMA requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_TFFF_RE (25U) /*!< Bit position for SPI_RSER_TFFF_RE. */ +#define BM_SPI_RSER_TFFF_RE (0x02000000U) /*!< Bit mask for SPI_RSER_TFFF_RE. */ +#define BS_SPI_RSER_TFFF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TFFF_RE. */ + +/*! @brief Read current value of the SPI_RSER_TFFF_RE field. */ +#define BR_SPI_RSER_TFFF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_TFFF_RE. */ +#define BF_SPI_RSER_TFFF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFFF_RE) & BM_SPI_RSER_TFFF_RE) + +/*! @brief Set the TFFF_RE field to a new value. */ +#define BW_SPI_RSER_TFFF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_RE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field TFUF_RE[27] (RW) + * + * Enables the TFUF flag in the SR to generate an interrupt request. + * + * Values: + * - 0 - TFUF interrupt requests are disabled. + * - 1 - TFUF interrupt requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_TFUF_RE (27U) /*!< Bit position for SPI_RSER_TFUF_RE. */ +#define BM_SPI_RSER_TFUF_RE (0x08000000U) /*!< Bit mask for SPI_RSER_TFUF_RE. */ +#define BS_SPI_RSER_TFUF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TFUF_RE. */ + +/*! @brief Read current value of the SPI_RSER_TFUF_RE field. */ +#define BR_SPI_RSER_TFUF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFUF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_TFUF_RE. */ +#define BF_SPI_RSER_TFUF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFUF_RE) & BM_SPI_RSER_TFUF_RE) + +/*! @brief Set the TFUF_RE field to a new value. */ +#define BW_SPI_RSER_TFUF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFUF_RE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field EOQF_RE[28] (RW) + * + * Enables the EOQF flag in the SR to generate an interrupt request. + * + * Values: + * - 0 - EOQF interrupt requests are disabled. + * - 1 - EOQF interrupt requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_EOQF_RE (28U) /*!< Bit position for SPI_RSER_EOQF_RE. */ +#define BM_SPI_RSER_EOQF_RE (0x10000000U) /*!< Bit mask for SPI_RSER_EOQF_RE. */ +#define BS_SPI_RSER_EOQF_RE (1U) /*!< Bit field size in bits for SPI_RSER_EOQF_RE. */ + +/*! @brief Read current value of the SPI_RSER_EOQF_RE field. */ +#define BR_SPI_RSER_EOQF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_EOQF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_EOQF_RE. */ +#define BF_SPI_RSER_EOQF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_EOQF_RE) & BM_SPI_RSER_EOQF_RE) + +/*! @brief Set the EOQF_RE field to a new value. */ +#define BW_SPI_RSER_EOQF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_EOQF_RE) = (v)) +/*@}*/ + +/*! + * @name Register SPI_RSER, field TCF_RE[31] (RW) + * + * Enables TCF flag in the SR to generate an interrupt request. + * + * Values: + * - 0 - TCF interrupt requests are disabled. + * - 1 - TCF interrupt requests are enabled. + */ +/*@{*/ +#define BP_SPI_RSER_TCF_RE (31U) /*!< Bit position for SPI_RSER_TCF_RE. */ +#define BM_SPI_RSER_TCF_RE (0x80000000U) /*!< Bit mask for SPI_RSER_TCF_RE. */ +#define BS_SPI_RSER_TCF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TCF_RE. */ + +/*! @brief Read current value of the SPI_RSER_TCF_RE field. */ +#define BR_SPI_RSER_TCF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TCF_RE)) + +/*! @brief Format value for bitfield SPI_RSER_TCF_RE. */ +#define BF_SPI_RSER_TCF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TCF_RE) & BM_SPI_RSER_TCF_RE) + +/*! @brief Set the TCF_RE field to a new value. */ +#define BW_SPI_RSER_TCF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TCF_RE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode + ******************************************************************************/ + +/*! + * @brief HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode (RW) + * + * Reset value: 0x00000000U + * + * Specifies data to be transferred to the TX FIFO. An 8- or 16-bit write access + * transfers all 32 bits to the TX FIFO. In Master mode, the register transfers + * 16 bits of data and 16 bits of command information. In Slave mode, all 32 bits + * can be used as data, supporting up to 32-bit frame operation. A read access + * of PUSHR returns the topmost TX FIFO entry. When the module is disabled, + * writing to this register does not update the FIFO. Therefore, any reads performed + * while the module is disabled return the last PUSHR write performed while the + * module was still enabled. + */ +typedef union _hw_spi_pushr +{ + uint32_t U; + struct _hw_spi_pushr_bitfields + { + uint32_t TXDATA : 16; /*!< [15:0] Transmit Data */ + uint32_t PCS : 6; /*!< [21:16] */ + uint32_t RESERVED0 : 4; /*!< [25:22] */ + uint32_t CTCNT : 1; /*!< [26] Clear Transfer Counter */ + uint32_t EOQ : 1; /*!< [27] End Of Queue */ + uint32_t CTAS : 3; /*!< [30:28] Clock and Transfer Attributes Select + * */ + uint32_t CONT : 1; /*!< [31] Continuous Peripheral Chip Select Enable + * */ + } B; +} hw_spi_pushr_t; + +/*! + * @name Constants and macros for entire SPI_PUSHR register + */ +/*@{*/ +#define HW_SPI_PUSHR_ADDR(x) ((x) + 0x34U) + +#define HW_SPI_PUSHR(x) (*(__IO hw_spi_pushr_t *) HW_SPI_PUSHR_ADDR(x)) +#define HW_SPI_PUSHR_RD(x) (HW_SPI_PUSHR(x).U) +#define HW_SPI_PUSHR_WR(x, v) (HW_SPI_PUSHR(x).U = (v)) +#define HW_SPI_PUSHR_SET(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) | (v))) +#define HW_SPI_PUSHR_CLR(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) & ~(v))) +#define HW_SPI_PUSHR_TOG(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_PUSHR bitfields + */ + +/*! + * @name Register SPI_PUSHR, field TXDATA[15:0] (RW) + * + * Holds SPI data to be transferred according to the associated SPI command. + */ +/*@{*/ +#define BP_SPI_PUSHR_TXDATA (0U) /*!< Bit position for SPI_PUSHR_TXDATA. */ +#define BM_SPI_PUSHR_TXDATA (0x0000FFFFU) /*!< Bit mask for SPI_PUSHR_TXDATA. */ +#define BS_SPI_PUSHR_TXDATA (16U) /*!< Bit field size in bits for SPI_PUSHR_TXDATA. */ + +/*! @brief Read current value of the SPI_PUSHR_TXDATA field. */ +#define BR_SPI_PUSHR_TXDATA(x) (HW_SPI_PUSHR(x).B.TXDATA) + +/*! @brief Format value for bitfield SPI_PUSHR_TXDATA. */ +#define BF_SPI_PUSHR_TXDATA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_TXDATA) & BM_SPI_PUSHR_TXDATA) + +/*! @brief Set the TXDATA field to a new value. */ +#define BW_SPI_PUSHR_TXDATA(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_TXDATA) | BF_SPI_PUSHR_TXDATA(v))) +/*@}*/ + +/*! + * @name Register SPI_PUSHR, field PCS[21:16] (RW) + * + * Select which PCS signals are to be asserted for the transfer. Refer to the + * chip configuration details for the number of PCS signals used in this MCU. + * + * Values: + * - 0 - Negate the PCS[x] signal. + * - 1 - Assert the PCS[x] signal. + */ +/*@{*/ +#define BP_SPI_PUSHR_PCS (16U) /*!< Bit position for SPI_PUSHR_PCS. */ +#define BM_SPI_PUSHR_PCS (0x003F0000U) /*!< Bit mask for SPI_PUSHR_PCS. */ +#define BS_SPI_PUSHR_PCS (6U) /*!< Bit field size in bits for SPI_PUSHR_PCS. */ + +/*! @brief Read current value of the SPI_PUSHR_PCS field. */ +#define BR_SPI_PUSHR_PCS(x) (HW_SPI_PUSHR(x).B.PCS) + +/*! @brief Format value for bitfield SPI_PUSHR_PCS. */ +#define BF_SPI_PUSHR_PCS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_PCS) & BM_SPI_PUSHR_PCS) + +/*! @brief Set the PCS field to a new value. */ +#define BW_SPI_PUSHR_PCS(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_PCS) | BF_SPI_PUSHR_PCS(v))) +/*@}*/ + +/*! + * @name Register SPI_PUSHR, field CTCNT[26] (RW) + * + * Clears the TCNT field in the TCR register. The TCNT field is cleared before + * the module starts transmitting the current SPI frame. + * + * Values: + * - 0 - Do not clear the TCR[TCNT] field. + * - 1 - Clear the TCR[TCNT] field. + */ +/*@{*/ +#define BP_SPI_PUSHR_CTCNT (26U) /*!< Bit position for SPI_PUSHR_CTCNT. */ +#define BM_SPI_PUSHR_CTCNT (0x04000000U) /*!< Bit mask for SPI_PUSHR_CTCNT. */ +#define BS_SPI_PUSHR_CTCNT (1U) /*!< Bit field size in bits for SPI_PUSHR_CTCNT. */ + +/*! @brief Read current value of the SPI_PUSHR_CTCNT field. */ +#define BR_SPI_PUSHR_CTCNT(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CTCNT)) + +/*! @brief Format value for bitfield SPI_PUSHR_CTCNT. */ +#define BF_SPI_PUSHR_CTCNT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CTCNT) & BM_SPI_PUSHR_CTCNT) + +/*! @brief Set the CTCNT field to a new value. */ +#define BW_SPI_PUSHR_CTCNT(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CTCNT) = (v)) +/*@}*/ + +/*! + * @name Register SPI_PUSHR, field EOQ[27] (RW) + * + * Host software uses this bit to signal to the module that the current SPI + * transfer is the last in a queue. At the end of the transfer, the EOQF bit in the + * SR is set. + * + * Values: + * - 0 - The SPI data is not the last data to transfer. + * - 1 - The SPI data is the last data to transfer. + */ +/*@{*/ +#define BP_SPI_PUSHR_EOQ (27U) /*!< Bit position for SPI_PUSHR_EOQ. */ +#define BM_SPI_PUSHR_EOQ (0x08000000U) /*!< Bit mask for SPI_PUSHR_EOQ. */ +#define BS_SPI_PUSHR_EOQ (1U) /*!< Bit field size in bits for SPI_PUSHR_EOQ. */ + +/*! @brief Read current value of the SPI_PUSHR_EOQ field. */ +#define BR_SPI_PUSHR_EOQ(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_EOQ)) + +/*! @brief Format value for bitfield SPI_PUSHR_EOQ. */ +#define BF_SPI_PUSHR_EOQ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_EOQ) & BM_SPI_PUSHR_EOQ) + +/*! @brief Set the EOQ field to a new value. */ +#define BW_SPI_PUSHR_EOQ(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_EOQ) = (v)) +/*@}*/ + +/*! + * @name Register SPI_PUSHR, field CTAS[30:28] (RW) + * + * Selects which CTAR to use in master mode to specify the transfer attributes + * for the associated SPI frame. In SPI Slave mode, CTAR0 is used. See the chip + * configuration details to determine how many CTARs this device has. You should + * not program a value in this field for a register that is not present. + * + * Values: + * - 000 - CTAR0 + * - 001 - CTAR1 + * - 010 - Reserved + * - 011 - Reserved + * - 100 - Reserved + * - 101 - Reserved + * - 110 - Reserved + * - 111 - Reserved + */ +/*@{*/ +#define BP_SPI_PUSHR_CTAS (28U) /*!< Bit position for SPI_PUSHR_CTAS. */ +#define BM_SPI_PUSHR_CTAS (0x70000000U) /*!< Bit mask for SPI_PUSHR_CTAS. */ +#define BS_SPI_PUSHR_CTAS (3U) /*!< Bit field size in bits for SPI_PUSHR_CTAS. */ + +/*! @brief Read current value of the SPI_PUSHR_CTAS field. */ +#define BR_SPI_PUSHR_CTAS(x) (HW_SPI_PUSHR(x).B.CTAS) + +/*! @brief Format value for bitfield SPI_PUSHR_CTAS. */ +#define BF_SPI_PUSHR_CTAS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CTAS) & BM_SPI_PUSHR_CTAS) + +/*! @brief Set the CTAS field to a new value. */ +#define BW_SPI_PUSHR_CTAS(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_CTAS) | BF_SPI_PUSHR_CTAS(v))) +/*@}*/ + +/*! + * @name Register SPI_PUSHR, field CONT[31] (RW) + * + * Selects a continuous selection format. The bit is used in SPI Master mode. + * The bit enables the selected PCS signals to remain asserted between transfers. + * + * Values: + * - 0 - Return PCSn signals to their inactive state between transfers. + * - 1 - Keep PCSn signals asserted between transfers. + */ +/*@{*/ +#define BP_SPI_PUSHR_CONT (31U) /*!< Bit position for SPI_PUSHR_CONT. */ +#define BM_SPI_PUSHR_CONT (0x80000000U) /*!< Bit mask for SPI_PUSHR_CONT. */ +#define BS_SPI_PUSHR_CONT (1U) /*!< Bit field size in bits for SPI_PUSHR_CONT. */ + +/*! @brief Read current value of the SPI_PUSHR_CONT field. */ +#define BR_SPI_PUSHR_CONT(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CONT)) + +/*! @brief Format value for bitfield SPI_PUSHR_CONT. */ +#define BF_SPI_PUSHR_CONT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CONT) & BM_SPI_PUSHR_CONT) + +/*! @brief Set the CONT field to a new value. */ +#define BW_SPI_PUSHR_CONT(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CONT) = (v)) +/*@}*/ +/******************************************************************************* + * HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode + ******************************************************************************/ + +/*! + * @brief HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode (RW) + * + * Reset value: 0x00000000U + * + * Specifies data to be transferred to the TX FIFO. An 8- or 16-bit write access + * to PUSHR transfers all 32 bits to the TX FIFO. In master mode, the register + * transfers 16 bits of data and 16 bits of command information to the TX FIFO. In + * slave mode, all 32 register bits can be used as data, supporting up to 32-bit + * SPI Frame operation. + */ +typedef union _hw_spi_pushr_slave +{ + uint32_t U; + struct _hw_spi_pushr_slave_bitfields + { + uint32_t TXDATA : 32; /*!< [31:0] Transmit Data */ + } B; +} hw_spi_pushr_slave_t; + +/*! + * @name Constants and macros for entire SPI_PUSHR_SLAVE register + */ +/*@{*/ +#define HW_SPI_PUSHR_SLAVE_ADDR(x) ((x) + 0x34U) + +#define HW_SPI_PUSHR_SLAVE(x) (*(__IO hw_spi_pushr_slave_t *) HW_SPI_PUSHR_SLAVE_ADDR(x)) +#define HW_SPI_PUSHR_SLAVE_RD(x) (HW_SPI_PUSHR_SLAVE(x).U) +#define HW_SPI_PUSHR_SLAVE_WR(x, v) (HW_SPI_PUSHR_SLAVE(x).U = (v)) +#define HW_SPI_PUSHR_SLAVE_SET(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) | (v))) +#define HW_SPI_PUSHR_SLAVE_CLR(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) & ~(v))) +#define HW_SPI_PUSHR_SLAVE_TOG(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual SPI_PUSHR_SLAVE bitfields + */ + +/*! + * @name Register SPI_PUSHR_SLAVE, field TXDATA[31:0] (RW) + * + * Holds SPI data to be transferred according to the associated SPI command. + */ +/*@{*/ +#define BP_SPI_PUSHR_SLAVE_TXDATA (0U) /*!< Bit position for SPI_PUSHR_SLAVE_TXDATA. */ +#define BM_SPI_PUSHR_SLAVE_TXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_PUSHR_SLAVE_TXDATA. */ +#define BS_SPI_PUSHR_SLAVE_TXDATA (32U) /*!< Bit field size in bits for SPI_PUSHR_SLAVE_TXDATA. */ + +/*! @brief Read current value of the SPI_PUSHR_SLAVE_TXDATA field. */ +#define BR_SPI_PUSHR_SLAVE_TXDATA(x) (HW_SPI_PUSHR_SLAVE(x).U) + +/*! @brief Format value for bitfield SPI_PUSHR_SLAVE_TXDATA. */ +#define BF_SPI_PUSHR_SLAVE_TXDATA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_SLAVE_TXDATA) & BM_SPI_PUSHR_SLAVE_TXDATA) + +/*! @brief Set the TXDATA field to a new value. */ +#define BW_SPI_PUSHR_SLAVE_TXDATA(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_SPI_POPR - POP RX FIFO Register + ******************************************************************************/ + +/*! + * @brief HW_SPI_POPR - POP RX FIFO Register (RO) + * + * Reset value: 0x00000000U + * + * POPR is used to read the RX FIFO. Eight- or sixteen-bit read accesses to the + * POPR have the same effect on the RX FIFO as 32-bit read accesses. A write to + * this register will generate a Transfer Error. + */ +typedef union _hw_spi_popr +{ + uint32_t U; + struct _hw_spi_popr_bitfields + { + uint32_t RXDATA : 32; /*!< [31:0] Received Data */ + } B; +} hw_spi_popr_t; + +/*! + * @name Constants and macros for entire SPI_POPR register + */ +/*@{*/ +#define HW_SPI_POPR_ADDR(x) ((x) + 0x38U) + +#define HW_SPI_POPR(x) (*(__I hw_spi_popr_t *) HW_SPI_POPR_ADDR(x)) +#define HW_SPI_POPR_RD(x) (HW_SPI_POPR(x).U) +/*@}*/ + +/* + * Constants & macros for individual SPI_POPR bitfields + */ + +/*! + * @name Register SPI_POPR, field RXDATA[31:0] (RO) + * + * Contains the SPI data from the RX FIFO entry to which the Pop Next Data + * Pointer points. + */ +/*@{*/ +#define BP_SPI_POPR_RXDATA (0U) /*!< Bit position for SPI_POPR_RXDATA. */ +#define BM_SPI_POPR_RXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_POPR_RXDATA. */ +#define BS_SPI_POPR_RXDATA (32U) /*!< Bit field size in bits for SPI_POPR_RXDATA. */ + +/*! @brief Read current value of the SPI_POPR_RXDATA field. */ +#define BR_SPI_POPR_RXDATA(x) (HW_SPI_POPR(x).U) +/*@}*/ + +/******************************************************************************* + * HW_SPI_TXFRn - Transmit FIFO Registers + ******************************************************************************/ + +/*! + * @brief HW_SPI_TXFRn - Transmit FIFO Registers (RO) + * + * Reset value: 0x00000000U + * + * TXFRn registers provide visibility into the TX FIFO for debugging purposes. + * Each register is an entry in the TX FIFO. The registers are read-only and + * cannot be modified. Reading the TXFRx registers does not alter the state of the TX + * FIFO. + */ +typedef union _hw_spi_txfrn +{ + uint32_t U; + struct _hw_spi_txfrn_bitfields + { + uint32_t TXDATA : 16; /*!< [15:0] Transmit Data */ + uint32_t TXCMD_TXDATA : 16; /*!< [31:16] Transmit Command or Transmit + * Data */ + } B; +} hw_spi_txfrn_t; + +/*! + * @name Constants and macros for entire SPI_TXFRn register + */ +/*@{*/ +#define HW_SPI_TXFRn_COUNT (4U) + +#define HW_SPI_TXFRn_ADDR(x, n) ((x) + 0x3CU + (0x4U * (n))) + +#define HW_SPI_TXFRn(x, n) (*(__I hw_spi_txfrn_t *) HW_SPI_TXFRn_ADDR(x, n)) +#define HW_SPI_TXFRn_RD(x, n) (HW_SPI_TXFRn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual SPI_TXFRn bitfields + */ + +/*! + * @name Register SPI_TXFRn, field TXDATA[15:0] (RO) + * + * Contains the SPI data to be shifted out. + */ +/*@{*/ +#define BP_SPI_TXFRn_TXDATA (0U) /*!< Bit position for SPI_TXFRn_TXDATA. */ +#define BM_SPI_TXFRn_TXDATA (0x0000FFFFU) /*!< Bit mask for SPI_TXFRn_TXDATA. */ +#define BS_SPI_TXFRn_TXDATA (16U) /*!< Bit field size in bits for SPI_TXFRn_TXDATA. */ + +/*! @brief Read current value of the SPI_TXFRn_TXDATA field. */ +#define BR_SPI_TXFRn_TXDATA(x, n) (HW_SPI_TXFRn(x, n).B.TXDATA) +/*@}*/ + +/*! + * @name Register SPI_TXFRn, field TXCMD_TXDATA[31:16] (RO) + * + * In Master mode the TXCMD field contains the command that sets the transfer + * attributes for the SPI data. In Slave mode, the TXDATA contains 16 MSB bits of + * the SPI data to be shifted out. + */ +/*@{*/ +#define BP_SPI_TXFRn_TXCMD_TXDATA (16U) /*!< Bit position for SPI_TXFRn_TXCMD_TXDATA. */ +#define BM_SPI_TXFRn_TXCMD_TXDATA (0xFFFF0000U) /*!< Bit mask for SPI_TXFRn_TXCMD_TXDATA. */ +#define BS_SPI_TXFRn_TXCMD_TXDATA (16U) /*!< Bit field size in bits for SPI_TXFRn_TXCMD_TXDATA. */ + +/*! @brief Read current value of the SPI_TXFRn_TXCMD_TXDATA field. */ +#define BR_SPI_TXFRn_TXCMD_TXDATA(x, n) (HW_SPI_TXFRn(x, n).B.TXCMD_TXDATA) +/*@}*/ + +/******************************************************************************* + * HW_SPI_RXFRn - Receive FIFO Registers + ******************************************************************************/ + +/*! + * @brief HW_SPI_RXFRn - Receive FIFO Registers (RO) + * + * Reset value: 0x00000000U + * + * RXFRn provide visibility into the RX FIFO for debugging purposes. Each + * register is an entry in the RX FIFO. The RXFR registers are read-only. Reading the + * RXFRx registers does not alter the state of the RX FIFO. + */ +typedef union _hw_spi_rxfrn +{ + uint32_t U; + struct _hw_spi_rxfrn_bitfields + { + uint32_t RXDATA : 32; /*!< [31:0] Receive Data */ + } B; +} hw_spi_rxfrn_t; + +/*! + * @name Constants and macros for entire SPI_RXFRn register + */ +/*@{*/ +#define HW_SPI_RXFRn_COUNT (4U) + +#define HW_SPI_RXFRn_ADDR(x, n) ((x) + 0x7CU + (0x4U * (n))) + +#define HW_SPI_RXFRn(x, n) (*(__I hw_spi_rxfrn_t *) HW_SPI_RXFRn_ADDR(x, n)) +#define HW_SPI_RXFRn_RD(x, n) (HW_SPI_RXFRn(x, n).U) +/*@}*/ + +/* + * Constants & macros for individual SPI_RXFRn bitfields + */ + +/*! + * @name Register SPI_RXFRn, field RXDATA[31:0] (RO) + * + * Contains the received SPI data. + */ +/*@{*/ +#define BP_SPI_RXFRn_RXDATA (0U) /*!< Bit position for SPI_RXFRn_RXDATA. */ +#define BM_SPI_RXFRn_RXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_RXFRn_RXDATA. */ +#define BS_SPI_RXFRn_RXDATA (32U) /*!< Bit field size in bits for SPI_RXFRn_RXDATA. */ + +/*! @brief Read current value of the SPI_RXFRn_RXDATA field. */ +#define BR_SPI_RXFRn_RXDATA(x, n) (HW_SPI_RXFRn(x, n).U) +/*@}*/ + +/* +** Start of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma push + #pragma anon_unions +#elif defined(__CWCC__) + #pragma push + #pragma cpp_extensions on +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=extended +#else + #error Not supported compiler type +#endif + +/******************************************************************************* + * hw_spi_t - module struct + ******************************************************************************/ +/*! + * @brief All SPI module registers. + */ +#pragma pack(1) +typedef struct _hw_spi +{ + __IO hw_spi_mcr_t MCR; /*!< [0x0] Module Configuration Register */ + uint8_t _reserved0[4]; + __IO hw_spi_tcr_t TCR; /*!< [0x8] Transfer Count Register */ + union { + __IO hw_spi_ctarn_t CTARn[2]; /*!< [0xC] Clock and Transfer Attributes Register (In Master Mode) */ + __IO hw_spi_ctarn_slave_t CTARn_SLAVE[1]; /*!< [0xC] Clock and Transfer Attributes Register (In Slave Mode) */ + }; + uint8_t _reserved1[24]; + __IO hw_spi_sr_t SR; /*!< [0x2C] Status Register */ + __IO hw_spi_rser_t RSER; /*!< [0x30] DMA/Interrupt Request Select and Enable Register */ + union { + __IO hw_spi_pushr_t PUSHR; /*!< [0x34] PUSH TX FIFO Register In Master Mode */ + __IO hw_spi_pushr_slave_t PUSHR_SLAVE; /*!< [0x34] PUSH TX FIFO Register In Slave Mode */ + }; + __I hw_spi_popr_t POPR; /*!< [0x38] POP RX FIFO Register */ + __I hw_spi_txfrn_t TXFRn[4]; /*!< [0x3C] Transmit FIFO Registers */ + uint8_t _reserved2[48]; + __I hw_spi_rxfrn_t RXFRn[4]; /*!< [0x7C] Receive FIFO Registers */ +} hw_spi_t; +#pragma pack() + +/*! @brief Macro to access all SPI registers. */ +/*! @param x SPI module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_SPI(SPI0_BASE)</code>. */ +#define HW_SPI(x) (*(hw_spi_t *)(x)) + +/* +** End of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma pop +#elif defined(__CWCC__) + #pragma pop +#elif defined(__GNUC__) + /* leave anonymous unions enabled */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=default +#else + #error Not supported compiler type +#endif + +#endif /* __HW_SPI_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_uart.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_uart.h new file mode 100644 index 0000000000..f11f043532 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_uart.h @@ -0,0 +1,4876 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_UART_REGISTERS_H__ +#define __HW_UART_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 UART + * + * Serial Communication Interface + * + * Registers defined in this header file: + * - HW_UART_BDH - UART Baud Rate Registers: High + * - HW_UART_BDL - UART Baud Rate Registers: Low + * - HW_UART_C1 - UART Control Register 1 + * - HW_UART_C2 - UART Control Register 2 + * - HW_UART_S1 - UART Status Register 1 + * - HW_UART_S2 - UART Status Register 2 + * - HW_UART_C3 - UART Control Register 3 + * - HW_UART_D - UART Data Register + * - HW_UART_MA1 - UART Match Address Registers 1 + * - HW_UART_MA2 - UART Match Address Registers 2 + * - HW_UART_C4 - UART Control Register 4 + * - HW_UART_C5 - UART Control Register 5 + * - HW_UART_ED - UART Extended Data Register + * - HW_UART_MODEM - UART Modem Register + * - HW_UART_IR - UART Infrared Register + * - HW_UART_PFIFO - UART FIFO Parameters + * - HW_UART_CFIFO - UART FIFO Control Register + * - HW_UART_SFIFO - UART FIFO Status Register + * - HW_UART_TWFIFO - UART FIFO Transmit Watermark + * - HW_UART_TCFIFO - UART FIFO Transmit Count + * - HW_UART_RWFIFO - UART FIFO Receive Watermark + * - HW_UART_RCFIFO - UART FIFO Receive Count + * - HW_UART_C7816 - UART 7816 Control Register + * - HW_UART_IE7816 - UART 7816 Interrupt Enable Register + * - HW_UART_IS7816 - UART 7816 Interrupt Status Register + * - HW_UART_WP7816 - UART 7816 Wait Parameter Register + * - HW_UART_WN7816 - UART 7816 Wait N Register + * - HW_UART_WF7816 - UART 7816 Wait FD Register + * - HW_UART_ET7816 - UART 7816 Error Threshold Register + * - HW_UART_TL7816 - UART 7816 Transmit Length Register + * - HW_UART_AP7816A_T0 - UART 7816 ATR Duration Timer Register A + * - HW_UART_AP7816B_T0 - UART 7816 ATR Duration Timer Register B + * - HW_UART_WP7816A_T0 - UART 7816 Wait Parameter Register A + * - HW_UART_WP7816B_T0 - UART 7816 Wait Parameter Register B + * - HW_UART_WP7816A_T1 - UART 7816 Wait Parameter Register A + * - HW_UART_WP7816B_T1 - UART 7816 Wait Parameter Register B + * - HW_UART_WGP7816_T1 - UART 7816 Wait and Guard Parameter Register + * - HW_UART_WP7816C_T1 - UART 7816 Wait Parameter Register C + * + * - hw_uart_t - Struct containing all module registers. + */ + +#define HW_UART_INSTANCE_COUNT (3U) /*!< Number of instances of the UART module. */ +#define HW_UART0 (0U) /*!< Instance number for UART0. */ +#define HW_UART1 (1U) /*!< Instance number for UART1. */ +#define HW_UART2 (2U) /*!< Instance number for UART2. */ + +/******************************************************************************* + * HW_UART_BDH - UART Baud Rate Registers: High + ******************************************************************************/ + +/*! + * @brief HW_UART_BDH - UART Baud Rate Registers: High (RW) + * + * Reset value: 0x00U + * + * This register, along with the BDL register, controls the prescale divisor for + * UART baud rate generation. To update the 13-bit baud rate setting + * (SBR[12:0]), first write to BDH to buffer the high half of the new value and then write + * to BDL. The working value in BDH does not change until BDL is written. BDL is + * reset to a nonzero value, but after reset, the baud rate generator remains + * disabled until the first time the receiver or transmitter is enabled, that is, + * when C2[RE] or C2[TE] is set. + */ +typedef union _hw_uart_bdh +{ + uint8_t U; + struct _hw_uart_bdh_bitfields + { + uint8_t SBR : 5; /*!< [4:0] UART Baud Rate Bits */ + uint8_t RESERVED0 : 1; /*!< [5] */ + uint8_t RXEDGIE : 1; /*!< [6] RxD Input Active Edge Interrupt Enable + * */ + uint8_t LBKDIE : 1; /*!< [7] LIN Break Detect Interrupt Enable */ + } B; +} hw_uart_bdh_t; + +/*! + * @name Constants and macros for entire UART_BDH register + */ +/*@{*/ +#define HW_UART_BDH_ADDR(x) ((x) + 0x0U) + +#define HW_UART_BDH(x) (*(__IO hw_uart_bdh_t *) HW_UART_BDH_ADDR(x)) +#define HW_UART_BDH_RD(x) (HW_UART_BDH(x).U) +#define HW_UART_BDH_WR(x, v) (HW_UART_BDH(x).U = (v)) +#define HW_UART_BDH_SET(x, v) (HW_UART_BDH_WR(x, HW_UART_BDH_RD(x) | (v))) +#define HW_UART_BDH_CLR(x, v) (HW_UART_BDH_WR(x, HW_UART_BDH_RD(x) & ~(v))) +#define HW_UART_BDH_TOG(x, v) (HW_UART_BDH_WR(x, HW_UART_BDH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_BDH bitfields + */ + +/*! + * @name Register UART_BDH, field SBR[4:0] (RW) + * + * The baud rate for the UART is determined by the 13 SBR fields. See Baud rate + * generation for details. The baud rate generator is disabled until C2[TE] or + * C2[RE] is set for the first time after reset.The baud rate generator is disabled + * when SBR = 0. Writing to BDH has no effect without writing to BDL, because + * writing to BDH puts the data in a temporary location until BDL is written. + */ +/*@{*/ +#define BP_UART_BDH_SBR (0U) /*!< Bit position for UART_BDH_SBR. */ +#define BM_UART_BDH_SBR (0x1FU) /*!< Bit mask for UART_BDH_SBR. */ +#define BS_UART_BDH_SBR (5U) /*!< Bit field size in bits for UART_BDH_SBR. */ + +/*! @brief Read current value of the UART_BDH_SBR field. */ +#define BR_UART_BDH_SBR(x) (HW_UART_BDH(x).B.SBR) + +/*! @brief Format value for bitfield UART_BDH_SBR. */ +#define BF_UART_BDH_SBR(v) ((uint8_t)((uint8_t)(v) << BP_UART_BDH_SBR) & BM_UART_BDH_SBR) + +/*! @brief Set the SBR field to a new value. */ +#define BW_UART_BDH_SBR(x, v) (HW_UART_BDH_WR(x, (HW_UART_BDH_RD(x) & ~BM_UART_BDH_SBR) | BF_UART_BDH_SBR(v))) +/*@}*/ + +/*! + * @name Register UART_BDH, field RXEDGIE[6] (RW) + * + * Enables the receive input active edge, RXEDGIF, to generate interrupt + * requests. + * + * Values: + * - 0 - Hardware interrupts from RXEDGIF disabled using polling. + * - 1 - RXEDGIF interrupt request enabled. + */ +/*@{*/ +#define BP_UART_BDH_RXEDGIE (6U) /*!< Bit position for UART_BDH_RXEDGIE. */ +#define BM_UART_BDH_RXEDGIE (0x40U) /*!< Bit mask for UART_BDH_RXEDGIE. */ +#define BS_UART_BDH_RXEDGIE (1U) /*!< Bit field size in bits for UART_BDH_RXEDGIE. */ + +/*! @brief Read current value of the UART_BDH_RXEDGIE field. */ +#define BR_UART_BDH_RXEDGIE(x) (BITBAND_ACCESS8(HW_UART_BDH_ADDR(x), BP_UART_BDH_RXEDGIE)) + +/*! @brief Format value for bitfield UART_BDH_RXEDGIE. */ +#define BF_UART_BDH_RXEDGIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_BDH_RXEDGIE) & BM_UART_BDH_RXEDGIE) + +/*! @brief Set the RXEDGIE field to a new value. */ +#define BW_UART_BDH_RXEDGIE(x, v) (BITBAND_ACCESS8(HW_UART_BDH_ADDR(x), BP_UART_BDH_RXEDGIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_BDH, field LBKDIE[7] (RW) + * + * Enables the LIN break detect flag, LBKDIF, to generate interrupt requests + * based on the state of LBKDDMAS. + * + * Values: + * - 0 - LBKDIF interrupt requests disabled. + * - 1 - LBKDIF interrupt requests enabled. + */ +/*@{*/ +#define BP_UART_BDH_LBKDIE (7U) /*!< Bit position for UART_BDH_LBKDIE. */ +#define BM_UART_BDH_LBKDIE (0x80U) /*!< Bit mask for UART_BDH_LBKDIE. */ +#define BS_UART_BDH_LBKDIE (1U) /*!< Bit field size in bits for UART_BDH_LBKDIE. */ + +/*! @brief Read current value of the UART_BDH_LBKDIE field. */ +#define BR_UART_BDH_LBKDIE(x) (BITBAND_ACCESS8(HW_UART_BDH_ADDR(x), BP_UART_BDH_LBKDIE)) + +/*! @brief Format value for bitfield UART_BDH_LBKDIE. */ +#define BF_UART_BDH_LBKDIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_BDH_LBKDIE) & BM_UART_BDH_LBKDIE) + +/*! @brief Set the LBKDIE field to a new value. */ +#define BW_UART_BDH_LBKDIE(x, v) (BITBAND_ACCESS8(HW_UART_BDH_ADDR(x), BP_UART_BDH_LBKDIE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_BDL - UART Baud Rate Registers: Low + ******************************************************************************/ + +/*! + * @brief HW_UART_BDL - UART Baud Rate Registers: Low (RW) + * + * Reset value: 0x04U + * + * This register, along with the BDH register, controls the prescale divisor for + * UART baud rate generation. To update the 13-bit baud rate setting, SBR[12:0], + * first write to BDH to buffer the high half of the new value and then write to + * BDL. The working value in BDH does not change until BDL is written. BDL is + * reset to a nonzero value, but after reset, the baud rate generator remains + * disabled until the first time the receiver or transmitter is enabled, that is, when + * C2[RE] or C2[TE] is set. + */ +typedef union _hw_uart_bdl +{ + uint8_t U; + struct _hw_uart_bdl_bitfields + { + uint8_t SBR : 8; /*!< [7:0] UART Baud Rate Bits */ + } B; +} hw_uart_bdl_t; + +/*! + * @name Constants and macros for entire UART_BDL register + */ +/*@{*/ +#define HW_UART_BDL_ADDR(x) ((x) + 0x1U) + +#define HW_UART_BDL(x) (*(__IO hw_uart_bdl_t *) HW_UART_BDL_ADDR(x)) +#define HW_UART_BDL_RD(x) (HW_UART_BDL(x).U) +#define HW_UART_BDL_WR(x, v) (HW_UART_BDL(x).U = (v)) +#define HW_UART_BDL_SET(x, v) (HW_UART_BDL_WR(x, HW_UART_BDL_RD(x) | (v))) +#define HW_UART_BDL_CLR(x, v) (HW_UART_BDL_WR(x, HW_UART_BDL_RD(x) & ~(v))) +#define HW_UART_BDL_TOG(x, v) (HW_UART_BDL_WR(x, HW_UART_BDL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_BDL bitfields + */ + +/*! + * @name Register UART_BDL, field SBR[7:0] (RW) + * + * The baud rate for the UART is determined by the 13 SBR fields. See Baud rate + * generation for details. The baud rate generator is disabled until C2[TE] or + * C2[RE] is set for the first time after reset.The baud rate generator is disabled + * when SBR = 0. Writing to BDH has no effect without writing to BDL, because + * writing to BDH puts the data in a temporary location until BDL is written. When + * the 1/32 narrow pulse width is selected for infrared (IrDA), the baud rate + * fields must be even, the least significant bit is 0. See MODEM register for more + * details. + */ +/*@{*/ +#define BP_UART_BDL_SBR (0U) /*!< Bit position for UART_BDL_SBR. */ +#define BM_UART_BDL_SBR (0xFFU) /*!< Bit mask for UART_BDL_SBR. */ +#define BS_UART_BDL_SBR (8U) /*!< Bit field size in bits for UART_BDL_SBR. */ + +/*! @brief Read current value of the UART_BDL_SBR field. */ +#define BR_UART_BDL_SBR(x) (HW_UART_BDL(x).U) + +/*! @brief Format value for bitfield UART_BDL_SBR. */ +#define BF_UART_BDL_SBR(v) ((uint8_t)((uint8_t)(v) << BP_UART_BDL_SBR) & BM_UART_BDL_SBR) + +/*! @brief Set the SBR field to a new value. */ +#define BW_UART_BDL_SBR(x, v) (HW_UART_BDL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_C1 - UART Control Register 1 + ******************************************************************************/ + +/*! + * @brief HW_UART_C1 - UART Control Register 1 (RW) + * + * Reset value: 0x00U + * + * This read/write register controls various optional features of the UART + * system. + */ +typedef union _hw_uart_c1 +{ + uint8_t U; + struct _hw_uart_c1_bitfields + { + uint8_t PT : 1; /*!< [0] Parity Type */ + uint8_t PE : 1; /*!< [1] Parity Enable */ + uint8_t ILT : 1; /*!< [2] Idle Line Type Select */ + uint8_t WAKE : 1; /*!< [3] Receiver Wakeup Method Select */ + uint8_t M : 1; /*!< [4] 9-bit or 8-bit Mode Select */ + uint8_t RSRC : 1; /*!< [5] Receiver Source Select */ + uint8_t UARTSWAI : 1; /*!< [6] UART Stops in Wait Mode */ + uint8_t LOOPS : 1; /*!< [7] Loop Mode Select */ + } B; +} hw_uart_c1_t; + +/*! + * @name Constants and macros for entire UART_C1 register + */ +/*@{*/ +#define HW_UART_C1_ADDR(x) ((x) + 0x2U) + +#define HW_UART_C1(x) (*(__IO hw_uart_c1_t *) HW_UART_C1_ADDR(x)) +#define HW_UART_C1_RD(x) (HW_UART_C1(x).U) +#define HW_UART_C1_WR(x, v) (HW_UART_C1(x).U = (v)) +#define HW_UART_C1_SET(x, v) (HW_UART_C1_WR(x, HW_UART_C1_RD(x) | (v))) +#define HW_UART_C1_CLR(x, v) (HW_UART_C1_WR(x, HW_UART_C1_RD(x) & ~(v))) +#define HW_UART_C1_TOG(x, v) (HW_UART_C1_WR(x, HW_UART_C1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C1 bitfields + */ + +/*! + * @name Register UART_C1, field PT[0] (RW) + * + * Determines whether the UART generates and checks for even parity or odd + * parity. With even parity, an even number of 1s clears the parity bit and an odd + * number of 1s sets the parity bit. With odd parity, an odd number of 1s clears the + * parity bit and an even number of 1s sets the parity bit. This field must be + * cleared when C7816[ISO_7816E] is set/enabled. + * + * Values: + * - 0 - Even parity. + * - 1 - Odd parity. + */ +/*@{*/ +#define BP_UART_C1_PT (0U) /*!< Bit position for UART_C1_PT. */ +#define BM_UART_C1_PT (0x01U) /*!< Bit mask for UART_C1_PT. */ +#define BS_UART_C1_PT (1U) /*!< Bit field size in bits for UART_C1_PT. */ + +/*! @brief Read current value of the UART_C1_PT field. */ +#define BR_UART_C1_PT(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_PT)) + +/*! @brief Format value for bitfield UART_C1_PT. */ +#define BF_UART_C1_PT(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_PT) & BM_UART_C1_PT) + +/*! @brief Set the PT field to a new value. */ +#define BW_UART_C1_PT(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_PT) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field PE[1] (RW) + * + * Enables the parity function. When parity is enabled, parity function inserts + * a parity bit in the bit position immediately preceding the stop bit. This + * field must be set when C7816[ISO_7816E] is set/enabled. + * + * Values: + * - 0 - Parity function disabled. + * - 1 - Parity function enabled. + */ +/*@{*/ +#define BP_UART_C1_PE (1U) /*!< Bit position for UART_C1_PE. */ +#define BM_UART_C1_PE (0x02U) /*!< Bit mask for UART_C1_PE. */ +#define BS_UART_C1_PE (1U) /*!< Bit field size in bits for UART_C1_PE. */ + +/*! @brief Read current value of the UART_C1_PE field. */ +#define BR_UART_C1_PE(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_PE)) + +/*! @brief Format value for bitfield UART_C1_PE. */ +#define BF_UART_C1_PE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_PE) & BM_UART_C1_PE) + +/*! @brief Set the PE field to a new value. */ +#define BW_UART_C1_PE(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_PE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field ILT[2] (RW) + * + * Determines when the receiver starts counting logic 1s as idle character bits. + * The count begins either after a valid start bit or after the stop bit. If the + * count begins after the start bit, then a string of logic 1s preceding the + * stop bit can cause false recognition of an idle character. Beginning the count + * after the stop bit avoids false idle character recognition, but requires + * properly synchronized transmissions. In case the UART is programmed with ILT = 1, a + * logic of 1'b0 is automatically shifted after a received stop bit, therefore + * resetting the idle count. In case the UART is programmed for IDLE line wakeup + * (RWU = 1 and WAKE = 0), ILT has no effect on when the receiver starts counting + * logic 1s as idle character bits. In idle line wakeup, an idle character is + * recognized at anytime the receiver sees 10, 11, or 12 1s depending on the M, PE, + * and C4[M10] fields. + * + * Values: + * - 0 - Idle character bit count starts after start bit. + * - 1 - Idle character bit count starts after stop bit. + */ +/*@{*/ +#define BP_UART_C1_ILT (2U) /*!< Bit position for UART_C1_ILT. */ +#define BM_UART_C1_ILT (0x04U) /*!< Bit mask for UART_C1_ILT. */ +#define BS_UART_C1_ILT (1U) /*!< Bit field size in bits for UART_C1_ILT. */ + +/*! @brief Read current value of the UART_C1_ILT field. */ +#define BR_UART_C1_ILT(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_ILT)) + +/*! @brief Format value for bitfield UART_C1_ILT. */ +#define BF_UART_C1_ILT(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_ILT) & BM_UART_C1_ILT) + +/*! @brief Set the ILT field to a new value. */ +#define BW_UART_C1_ILT(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_ILT) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field WAKE[3] (RW) + * + * Determines which condition wakes the UART: Address mark in the most + * significant bit position of a received data character, or An idle condition on the + * receive pin input signal. + * + * Values: + * - 0 - Idle line wakeup. + * - 1 - Address mark wakeup. + */ +/*@{*/ +#define BP_UART_C1_WAKE (3U) /*!< Bit position for UART_C1_WAKE. */ +#define BM_UART_C1_WAKE (0x08U) /*!< Bit mask for UART_C1_WAKE. */ +#define BS_UART_C1_WAKE (1U) /*!< Bit field size in bits for UART_C1_WAKE. */ + +/*! @brief Read current value of the UART_C1_WAKE field. */ +#define BR_UART_C1_WAKE(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_WAKE)) + +/*! @brief Format value for bitfield UART_C1_WAKE. */ +#define BF_UART_C1_WAKE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_WAKE) & BM_UART_C1_WAKE) + +/*! @brief Set the WAKE field to a new value. */ +#define BW_UART_C1_WAKE(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_WAKE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field M[4] (RW) + * + * This field must be set when C7816[ISO_7816E] is set/enabled. + * + * Values: + * - 0 - Normal-start + 8 data bits (MSB/LSB first as determined by MSBF) + stop. + * - 1 - Use-start + 9 data bits (MSB/LSB first as determined by MSBF) + stop. + */ +/*@{*/ +#define BP_UART_C1_M (4U) /*!< Bit position for UART_C1_M. */ +#define BM_UART_C1_M (0x10U) /*!< Bit mask for UART_C1_M. */ +#define BS_UART_C1_M (1U) /*!< Bit field size in bits for UART_C1_M. */ + +/*! @brief Read current value of the UART_C1_M field. */ +#define BR_UART_C1_M(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_M)) + +/*! @brief Format value for bitfield UART_C1_M. */ +#define BF_UART_C1_M(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_M) & BM_UART_C1_M) + +/*! @brief Set the M field to a new value. */ +#define BW_UART_C1_M(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_M) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field RSRC[5] (RW) + * + * This field has no meaning or effect unless the LOOPS field is set. When LOOPS + * is set, the RSRC field determines the source for the receiver shift register + * input. + * + * Values: + * - 0 - Selects internal loop back mode. The receiver input is internally + * connected to transmitter output. + * - 1 - Single wire UART mode where the receiver input is connected to the + * transmit pin input signal. + */ +/*@{*/ +#define BP_UART_C1_RSRC (5U) /*!< Bit position for UART_C1_RSRC. */ +#define BM_UART_C1_RSRC (0x20U) /*!< Bit mask for UART_C1_RSRC. */ +#define BS_UART_C1_RSRC (1U) /*!< Bit field size in bits for UART_C1_RSRC. */ + +/*! @brief Read current value of the UART_C1_RSRC field. */ +#define BR_UART_C1_RSRC(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_RSRC)) + +/*! @brief Format value for bitfield UART_C1_RSRC. */ +#define BF_UART_C1_RSRC(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_RSRC) & BM_UART_C1_RSRC) + +/*! @brief Set the RSRC field to a new value. */ +#define BW_UART_C1_RSRC(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_RSRC) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field UARTSWAI[6] (RW) + * + * Values: + * - 0 - UART clock continues to run in Wait mode. + * - 1 - UART clock freezes while CPU is in Wait mode. + */ +/*@{*/ +#define BP_UART_C1_UARTSWAI (6U) /*!< Bit position for UART_C1_UARTSWAI. */ +#define BM_UART_C1_UARTSWAI (0x40U) /*!< Bit mask for UART_C1_UARTSWAI. */ +#define BS_UART_C1_UARTSWAI (1U) /*!< Bit field size in bits for UART_C1_UARTSWAI. */ + +/*! @brief Read current value of the UART_C1_UARTSWAI field. */ +#define BR_UART_C1_UARTSWAI(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_UARTSWAI)) + +/*! @brief Format value for bitfield UART_C1_UARTSWAI. */ +#define BF_UART_C1_UARTSWAI(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_UARTSWAI) & BM_UART_C1_UARTSWAI) + +/*! @brief Set the UARTSWAI field to a new value. */ +#define BW_UART_C1_UARTSWAI(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_UARTSWAI) = (v)) +/*@}*/ + +/*! + * @name Register UART_C1, field LOOPS[7] (RW) + * + * When LOOPS is set, the RxD pin is disconnected from the UART and the + * transmitter output is internally connected to the receiver input. The transmitter and + * the receiver must be enabled to use the loop function. + * + * Values: + * - 0 - Normal operation. + * - 1 - Loop mode where transmitter output is internally connected to receiver + * input. The receiver input is determined by RSRC. + */ +/*@{*/ +#define BP_UART_C1_LOOPS (7U) /*!< Bit position for UART_C1_LOOPS. */ +#define BM_UART_C1_LOOPS (0x80U) /*!< Bit mask for UART_C1_LOOPS. */ +#define BS_UART_C1_LOOPS (1U) /*!< Bit field size in bits for UART_C1_LOOPS. */ + +/*! @brief Read current value of the UART_C1_LOOPS field. */ +#define BR_UART_C1_LOOPS(x) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_LOOPS)) + +/*! @brief Format value for bitfield UART_C1_LOOPS. */ +#define BF_UART_C1_LOOPS(v) ((uint8_t)((uint8_t)(v) << BP_UART_C1_LOOPS) & BM_UART_C1_LOOPS) + +/*! @brief Set the LOOPS field to a new value. */ +#define BW_UART_C1_LOOPS(x, v) (BITBAND_ACCESS8(HW_UART_C1_ADDR(x), BP_UART_C1_LOOPS) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_C2 - UART Control Register 2 + ******************************************************************************/ + +/*! + * @brief HW_UART_C2 - UART Control Register 2 (RW) + * + * Reset value: 0x00U + * + * This register can be read or written at any time. + */ +typedef union _hw_uart_c2 +{ + uint8_t U; + struct _hw_uart_c2_bitfields + { + uint8_t SBK : 1; /*!< [0] Send Break */ + uint8_t RWU : 1; /*!< [1] Receiver Wakeup Control */ + uint8_t RE : 1; /*!< [2] Receiver Enable */ + uint8_t TE : 1; /*!< [3] Transmitter Enable */ + uint8_t ILIE : 1; /*!< [4] Idle Line Interrupt Enable */ + uint8_t RIE : 1; /*!< [5] Receiver Full Interrupt or DMA Transfer + * Enable */ + uint8_t TCIE : 1; /*!< [6] Transmission Complete Interrupt Enable */ + uint8_t TIE : 1; /*!< [7] Transmitter Interrupt or DMA Transfer + * Enable. */ + } B; +} hw_uart_c2_t; + +/*! + * @name Constants and macros for entire UART_C2 register + */ +/*@{*/ +#define HW_UART_C2_ADDR(x) ((x) + 0x3U) + +#define HW_UART_C2(x) (*(__IO hw_uart_c2_t *) HW_UART_C2_ADDR(x)) +#define HW_UART_C2_RD(x) (HW_UART_C2(x).U) +#define HW_UART_C2_WR(x, v) (HW_UART_C2(x).U = (v)) +#define HW_UART_C2_SET(x, v) (HW_UART_C2_WR(x, HW_UART_C2_RD(x) | (v))) +#define HW_UART_C2_CLR(x, v) (HW_UART_C2_WR(x, HW_UART_C2_RD(x) & ~(v))) +#define HW_UART_C2_TOG(x, v) (HW_UART_C2_WR(x, HW_UART_C2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C2 bitfields + */ + +/*! + * @name Register UART_C2, field SBK[0] (RW) + * + * Toggling SBK sends one break character from the following: See Transmitting + * break characters for the number of logic 0s for the different configurations. + * Toggling implies clearing the SBK field before the break character has finished + * transmitting. As long as SBK is set, the transmitter continues to send + * complete break characters (10, 11, or 12 bits, or 13 or 14 bits). Ensure that C2[TE] + * is asserted atleast 1 clock before assertion of this bit. 10, 11, or 12 logic + * 0s if S2[BRK13] is cleared 13 or 14 logic 0s if S2[BRK13] is set. This field + * must be cleared when C7816[ISO_7816E] is set. + * + * Values: + * - 0 - Normal transmitter operation. + * - 1 - Queue break characters to be sent. + */ +/*@{*/ +#define BP_UART_C2_SBK (0U) /*!< Bit position for UART_C2_SBK. */ +#define BM_UART_C2_SBK (0x01U) /*!< Bit mask for UART_C2_SBK. */ +#define BS_UART_C2_SBK (1U) /*!< Bit field size in bits for UART_C2_SBK. */ + +/*! @brief Read current value of the UART_C2_SBK field. */ +#define BR_UART_C2_SBK(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_SBK)) + +/*! @brief Format value for bitfield UART_C2_SBK. */ +#define BF_UART_C2_SBK(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_SBK) & BM_UART_C2_SBK) + +/*! @brief Set the SBK field to a new value. */ +#define BW_UART_C2_SBK(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_SBK) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field RWU[1] (RW) + * + * This field can be set to place the UART receiver in a standby state. RWU + * automatically clears when an RWU event occurs, that is, an IDLE event when + * C1[WAKE] is clear or an address match when C1[WAKE] is set. This field must be + * cleared when C7816[ISO_7816E] is set. RWU must be set only with C1[WAKE] = 0 (wakeup + * on idle) if the channel is currently not idle. This can be determined by + * S2[RAF]. If the flag is set to wake up an IDLE event and the channel is already + * idle, it is possible that the UART will discard data. This is because the data + * must be received or a LIN break detected after an IDLE is detected before IDLE + * is allowed to reasserted. + * + * Values: + * - 0 - Normal operation. + * - 1 - RWU enables the wakeup function and inhibits further receiver interrupt + * requests. Normally, hardware wakes the receiver by automatically clearing + * RWU. + */ +/*@{*/ +#define BP_UART_C2_RWU (1U) /*!< Bit position for UART_C2_RWU. */ +#define BM_UART_C2_RWU (0x02U) /*!< Bit mask for UART_C2_RWU. */ +#define BS_UART_C2_RWU (1U) /*!< Bit field size in bits for UART_C2_RWU. */ + +/*! @brief Read current value of the UART_C2_RWU field. */ +#define BR_UART_C2_RWU(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RWU)) + +/*! @brief Format value for bitfield UART_C2_RWU. */ +#define BF_UART_C2_RWU(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_RWU) & BM_UART_C2_RWU) + +/*! @brief Set the RWU field to a new value. */ +#define BW_UART_C2_RWU(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RWU) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field RE[2] (RW) + * + * Enables the UART receiver. + * + * Values: + * - 0 - Receiver off. + * - 1 - Receiver on. + */ +/*@{*/ +#define BP_UART_C2_RE (2U) /*!< Bit position for UART_C2_RE. */ +#define BM_UART_C2_RE (0x04U) /*!< Bit mask for UART_C2_RE. */ +#define BS_UART_C2_RE (1U) /*!< Bit field size in bits for UART_C2_RE. */ + +/*! @brief Read current value of the UART_C2_RE field. */ +#define BR_UART_C2_RE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RE)) + +/*! @brief Format value for bitfield UART_C2_RE. */ +#define BF_UART_C2_RE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_RE) & BM_UART_C2_RE) + +/*! @brief Set the RE field to a new value. */ +#define BW_UART_C2_RE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field TE[3] (RW) + * + * Enables the UART transmitter. TE can be used to queue an idle preamble by + * clearing and then setting TE. When C7816[ISO_7816E] is set/enabled and + * C7816[TTYPE] = 1, this field is automatically cleared after the requested block has been + * transmitted. This condition is detected when TL7816[TLEN] = 0 and four + * additional characters are transmitted. + * + * Values: + * - 0 - Transmitter off. + * - 1 - Transmitter on. + */ +/*@{*/ +#define BP_UART_C2_TE (3U) /*!< Bit position for UART_C2_TE. */ +#define BM_UART_C2_TE (0x08U) /*!< Bit mask for UART_C2_TE. */ +#define BS_UART_C2_TE (1U) /*!< Bit field size in bits for UART_C2_TE. */ + +/*! @brief Read current value of the UART_C2_TE field. */ +#define BR_UART_C2_TE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TE)) + +/*! @brief Format value for bitfield UART_C2_TE. */ +#define BF_UART_C2_TE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_TE) & BM_UART_C2_TE) + +/*! @brief Set the TE field to a new value. */ +#define BW_UART_C2_TE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field ILIE[4] (RW) + * + * Enables the idle line flag, S1[IDLE], to generate interrupt requests + * + * Values: + * - 0 - IDLE interrupt requests disabled. + * - 1 - IDLE interrupt requests enabled. + */ +/*@{*/ +#define BP_UART_C2_ILIE (4U) /*!< Bit position for UART_C2_ILIE. */ +#define BM_UART_C2_ILIE (0x10U) /*!< Bit mask for UART_C2_ILIE. */ +#define BS_UART_C2_ILIE (1U) /*!< Bit field size in bits for UART_C2_ILIE. */ + +/*! @brief Read current value of the UART_C2_ILIE field. */ +#define BR_UART_C2_ILIE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_ILIE)) + +/*! @brief Format value for bitfield UART_C2_ILIE. */ +#define BF_UART_C2_ILIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_ILIE) & BM_UART_C2_ILIE) + +/*! @brief Set the ILIE field to a new value. */ +#define BW_UART_C2_ILIE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_ILIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field RIE[5] (RW) + * + * Enables S1[RDRF] to generate interrupt requests or DMA transfer requests, + * based on the state of C5[RDMAS]. + * + * Values: + * - 0 - RDRF interrupt and DMA transfer requests disabled. + * - 1 - RDRF interrupt or DMA transfer requests enabled. + */ +/*@{*/ +#define BP_UART_C2_RIE (5U) /*!< Bit position for UART_C2_RIE. */ +#define BM_UART_C2_RIE (0x20U) /*!< Bit mask for UART_C2_RIE. */ +#define BS_UART_C2_RIE (1U) /*!< Bit field size in bits for UART_C2_RIE. */ + +/*! @brief Read current value of the UART_C2_RIE field. */ +#define BR_UART_C2_RIE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RIE)) + +/*! @brief Format value for bitfield UART_C2_RIE. */ +#define BF_UART_C2_RIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_RIE) & BM_UART_C2_RIE) + +/*! @brief Set the RIE field to a new value. */ +#define BW_UART_C2_RIE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_RIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field TCIE[6] (RW) + * + * Enables the transmission complete flag, S1[TC], to generate interrupt + * requests . + * + * Values: + * - 0 - TC interrupt requests disabled. + * - 1 - TC interrupt requests enabled. + */ +/*@{*/ +#define BP_UART_C2_TCIE (6U) /*!< Bit position for UART_C2_TCIE. */ +#define BM_UART_C2_TCIE (0x40U) /*!< Bit mask for UART_C2_TCIE. */ +#define BS_UART_C2_TCIE (1U) /*!< Bit field size in bits for UART_C2_TCIE. */ + +/*! @brief Read current value of the UART_C2_TCIE field. */ +#define BR_UART_C2_TCIE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TCIE)) + +/*! @brief Format value for bitfield UART_C2_TCIE. */ +#define BF_UART_C2_TCIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_TCIE) & BM_UART_C2_TCIE) + +/*! @brief Set the TCIE field to a new value. */ +#define BW_UART_C2_TCIE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TCIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C2, field TIE[7] (RW) + * + * Enables S1[TDRE] to generate interrupt requests or DMA transfer requests, + * based on the state of C5[TDMAS]. If C2[TIE] and C5[TDMAS] are both set, then TCIE + * must be cleared, and D[D] must not be written unless servicing a DMA request. + * + * Values: + * - 0 - TDRE interrupt and DMA transfer requests disabled. + * - 1 - TDRE interrupt or DMA transfer requests enabled. + */ +/*@{*/ +#define BP_UART_C2_TIE (7U) /*!< Bit position for UART_C2_TIE. */ +#define BM_UART_C2_TIE (0x80U) /*!< Bit mask for UART_C2_TIE. */ +#define BS_UART_C2_TIE (1U) /*!< Bit field size in bits for UART_C2_TIE. */ + +/*! @brief Read current value of the UART_C2_TIE field. */ +#define BR_UART_C2_TIE(x) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TIE)) + +/*! @brief Format value for bitfield UART_C2_TIE. */ +#define BF_UART_C2_TIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C2_TIE) & BM_UART_C2_TIE) + +/*! @brief Set the TIE field to a new value. */ +#define BW_UART_C2_TIE(x, v) (BITBAND_ACCESS8(HW_UART_C2_ADDR(x), BP_UART_C2_TIE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_S1 - UART Status Register 1 + ******************************************************************************/ + +/*! + * @brief HW_UART_S1 - UART Status Register 1 (RO) + * + * Reset value: 0xC0U + * + * The S1 register provides inputs to the MCU for generation of UART interrupts + * or DMA requests. This register can also be polled by the MCU to check the + * status of its fields. To clear a flag, the status register should be read followed + * by a read or write to D register, depending on the interrupt flag type. Other + * instructions can be executed between the two steps as long the handling of + * I/O is not compromised, but the order of operations is important for flag + * clearing. When a flag is configured to trigger a DMA request, assertion of the + * associated DMA done signal from the DMA controller clears the flag. If the + * condition that results in the assertion of the flag, interrupt, or DMA request is not + * resolved prior to clearing the flag, the flag, and interrupt/DMA request, + * reasserts. For example, if the DMA or interrupt service routine fails to write + * sufficient data to the transmit buffer to raise it above the watermark level, the + * flag reasserts and generates another interrupt or DMA request. Reading an + * empty data register to clear one of the flags of the S1 register causes the FIFO + * pointers to become misaligned. A receive FIFO flush reinitializes the + * pointers. A better way to prevent this situation is to always leave one byte in FIFO + * and this byte will be read eventually in clearing the flag bit. + */ +typedef union _hw_uart_s1 +{ + uint8_t U; + struct _hw_uart_s1_bitfields + { + uint8_t PF : 1; /*!< [0] Parity Error Flag */ + uint8_t FE : 1; /*!< [1] Framing Error Flag */ + uint8_t NF : 1; /*!< [2] Noise Flag */ + uint8_t OR : 1; /*!< [3] Receiver Overrun Flag */ + uint8_t IDLE : 1; /*!< [4] Idle Line Flag */ + uint8_t RDRF : 1; /*!< [5] Receive Data Register Full Flag */ + uint8_t TC : 1; /*!< [6] Transmit Complete Flag */ + uint8_t TDRE : 1; /*!< [7] Transmit Data Register Empty Flag */ + } B; +} hw_uart_s1_t; + +/*! + * @name Constants and macros for entire UART_S1 register + */ +/*@{*/ +#define HW_UART_S1_ADDR(x) ((x) + 0x4U) + +#define HW_UART_S1(x) (*(__I hw_uart_s1_t *) HW_UART_S1_ADDR(x)) +#define HW_UART_S1_RD(x) (HW_UART_S1(x).U) +/*@}*/ + +/* + * Constants & macros for individual UART_S1 bitfields + */ + +/*! + * @name Register UART_S1, field PF[0] (RO) + * + * PF is set when PE is set and the parity of the received data does not match + * its parity bit. The PF is not set in the case of an overrun condition. When PF + * is set, it indicates only that a dataword was received with parity error since + * the last time it was cleared. There is no guarantee that the first dataword + * read from the receive buffer has a parity error or that there is only one + * dataword in the buffer that was received with a parity error, unless the receive + * buffer has a depth of one. To clear PF, read S1 and then read D., S2[LBKDE] is + * disabled, Within the receive buffer structure the received dataword is tagged + * if it is received with a parity error. This information is available by reading + * the ED register prior to reading the D register. + * + * Values: + * - 0 - No parity error detected since the last time this flag was cleared. If + * the receive buffer has a depth greater than 1, then there may be data in + * the receive buffer what was received with a parity error. + * - 1 - At least one dataword was received with a parity error since the last + * time this flag was cleared. + */ +/*@{*/ +#define BP_UART_S1_PF (0U) /*!< Bit position for UART_S1_PF. */ +#define BM_UART_S1_PF (0x01U) /*!< Bit mask for UART_S1_PF. */ +#define BS_UART_S1_PF (1U) /*!< Bit field size in bits for UART_S1_PF. */ + +/*! @brief Read current value of the UART_S1_PF field. */ +#define BR_UART_S1_PF(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_PF)) +/*@}*/ + +/*! + * @name Register UART_S1, field FE[1] (RO) + * + * FE is set when a logic 0 is accepted as the stop bit. FE does not set in the + * case of an overrun or while the LIN break detect feature is enabled (S2[LBKDE] + * = 1). FE inhibits further data reception until it is cleared. To clear FE, + * read S1 with FE set and then read D. The last data in the receive buffer + * represents the data that was received with the frame error enabled. Framing errors + * are not supported when 7816E is set/enabled. However, if this flag is set, data + * is still not received in 7816 mode. + * + * Values: + * - 0 - No framing error detected. + * - 1 - Framing error. + */ +/*@{*/ +#define BP_UART_S1_FE (1U) /*!< Bit position for UART_S1_FE. */ +#define BM_UART_S1_FE (0x02U) /*!< Bit mask for UART_S1_FE. */ +#define BS_UART_S1_FE (1U) /*!< Bit field size in bits for UART_S1_FE. */ + +/*! @brief Read current value of the UART_S1_FE field. */ +#define BR_UART_S1_FE(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_FE)) +/*@}*/ + +/*! + * @name Register UART_S1, field NF[2] (RO) + * + * NF is set when the UART detects noise on the receiver input. NF does not + * become set in the case of an overrun or while the LIN break detect feature is + * enabled (S2[LBKDE] = 1). When NF is set, it indicates only that a dataword has + * been received with noise since the last time it was cleared. There is no + * guarantee that the first dataword read from the receive buffer has noise or that there + * is only one dataword in the buffer that was received with noise unless the + * receive buffer has a depth of one. To clear NF, read S1 and then read D. + * + * Values: + * - 0 - No noise detected since the last time this flag was cleared. If the + * receive buffer has a depth greater than 1 then there may be data in the + * receiver buffer that was received with noise. + * - 1 - At least one dataword was received with noise detected since the last + * time the flag was cleared. + */ +/*@{*/ +#define BP_UART_S1_NF (2U) /*!< Bit position for UART_S1_NF. */ +#define BM_UART_S1_NF (0x04U) /*!< Bit mask for UART_S1_NF. */ +#define BS_UART_S1_NF (1U) /*!< Bit field size in bits for UART_S1_NF. */ + +/*! @brief Read current value of the UART_S1_NF field. */ +#define BR_UART_S1_NF(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_NF)) +/*@}*/ + +/*! + * @name Register UART_S1, field OR[3] (RO) + * + * OR is set when software fails to prevent the receive data register from + * overflowing with data. The OR bit is set immediately after the stop bit has been + * completely received for the dataword that overflows the buffer and all the other + * error flags (FE, NF, and PF) are prevented from setting. The data in the + * shift register is lost, but the data already in the UART data registers is not + * affected. If the OR flag is set, no data is stored in the data buffer even if + * sufficient room exists. Additionally, while the OR flag is set, the RDRF and IDLE + * flags are blocked from asserting, that is, transition from an inactive to an + * active state. To clear OR, read S1 when OR is set and then read D. See + * functional description for more details regarding the operation of the OR bit.If + * LBKDE is enabled and a LIN Break is detected, the OR field asserts if S2[LBKDIF] + * is not cleared before the next data character is received. In 7816 mode, it is + * possible to configure a NACK to be returned by programing C7816[ONACK]. + * + * Values: + * - 0 - No overrun has occurred since the last time the flag was cleared. + * - 1 - Overrun has occurred or the overrun flag has not been cleared since the + * last overrun occured. + */ +/*@{*/ +#define BP_UART_S1_OR (3U) /*!< Bit position for UART_S1_OR. */ +#define BM_UART_S1_OR (0x08U) /*!< Bit mask for UART_S1_OR. */ +#define BS_UART_S1_OR (1U) /*!< Bit field size in bits for UART_S1_OR. */ + +/*! @brief Read current value of the UART_S1_OR field. */ +#define BR_UART_S1_OR(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_OR)) +/*@}*/ + +/*! + * @name Register UART_S1, field IDLE[4] (RO) + * + * After the IDLE flag is cleared, a frame must be received (although not + * necessarily stored in the data buffer, for example if C2[RWU] is set), or a LIN + * break character must set the S2[LBKDIF] flag before an idle condition can set the + * IDLE flag. To clear IDLE, read UART status S1 with IDLE set and then read D. + * IDLE is set when either of the following appear on the receiver input: 10 + * consecutive logic 1s if C1[M] = 0 11 consecutive logic 1s if C1[M] = 1 and C4[M10] + * = 0 12 consecutive logic 1s if C1[M] = 1, C4[M10] = 1, and C1[PE] = 1 Idle + * detection is not supported when 7816E is set/enabled and hence this flag is + * ignored. When RWU is set and WAKE is cleared, an idle line condition sets the IDLE + * flag if RWUID is set, else the IDLE flag does not become set. + * + * Values: + * - 0 - Receiver input is either active now or has never become active since + * the IDLE flag was last cleared. + * - 1 - Receiver input has become idle or the flag has not been cleared since + * it last asserted. + */ +/*@{*/ +#define BP_UART_S1_IDLE (4U) /*!< Bit position for UART_S1_IDLE. */ +#define BM_UART_S1_IDLE (0x10U) /*!< Bit mask for UART_S1_IDLE. */ +#define BS_UART_S1_IDLE (1U) /*!< Bit field size in bits for UART_S1_IDLE. */ + +/*! @brief Read current value of the UART_S1_IDLE field. */ +#define BR_UART_S1_IDLE(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_IDLE)) +/*@}*/ + +/*! + * @name Register UART_S1, field RDRF[5] (RO) + * + * RDRF is set when the number of datawords in the receive buffer is equal to or + * more than the number indicated by RWFIFO[RXWATER]. A dataword that is in the + * process of being received is not included in the count. To clear RDRF, read S1 + * when RDRF is set and then read D. For more efficient interrupt and DMA + * operation, read all data except the final value from the buffer, using D/C3[T8]/ED. + * Then read S1 and the final data value, resulting in the clearing of the RDRF + * flag. Even if RDRF is set, data will continue to be received until an overrun + * condition occurs.RDRF is prevented from setting while S2[LBKDE] is set. + * Additionally, when S2[LBKDE] is set, the received datawords are stored in the receive + * buffer but over-write each other. + * + * Values: + * - 0 - The number of datawords in the receive buffer is less than the number + * indicated by RXWATER. + * - 1 - The number of datawords in the receive buffer is equal to or greater + * than the number indicated by RXWATER at some point in time since this flag + * was last cleared. + */ +/*@{*/ +#define BP_UART_S1_RDRF (5U) /*!< Bit position for UART_S1_RDRF. */ +#define BM_UART_S1_RDRF (0x20U) /*!< Bit mask for UART_S1_RDRF. */ +#define BS_UART_S1_RDRF (1U) /*!< Bit field size in bits for UART_S1_RDRF. */ + +/*! @brief Read current value of the UART_S1_RDRF field. */ +#define BR_UART_S1_RDRF(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_RDRF)) +/*@}*/ + +/*! + * @name Register UART_S1, field TC[6] (RO) + * + * TC is set when the transmit buffer is empty and no data, preamble, or break + * character is being transmitted. When TC is set, the transmit data output signal + * becomes idle (logic 1). TC is cleared by reading S1 with TC set and then + * doing one of the following: When C7816[ISO_7816E] is set/enabled, this field is + * set after any NACK signal has been received, but prior to any corresponding + * guard times expiring. Writing to D to transmit new data. Queuing a preamble by + * clearing and then setting C2[TE]. Queuing a break character by writing 1 to SBK + * in C2. + * + * Values: + * - 0 - Transmitter active (sending data, a preamble, or a break). + * - 1 - Transmitter idle (transmission activity complete). + */ +/*@{*/ +#define BP_UART_S1_TC (6U) /*!< Bit position for UART_S1_TC. */ +#define BM_UART_S1_TC (0x40U) /*!< Bit mask for UART_S1_TC. */ +#define BS_UART_S1_TC (1U) /*!< Bit field size in bits for UART_S1_TC. */ + +/*! @brief Read current value of the UART_S1_TC field. */ +#define BR_UART_S1_TC(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_TC)) +/*@}*/ + +/*! + * @name Register UART_S1, field TDRE[7] (RO) + * + * TDRE will set when the number of datawords in the transmit buffer (D and + * C3[T8])is equal to or less than the number indicated by TWFIFO[TXWATER]. A + * character that is in the process of being transmitted is not included in the count. + * To clear TDRE, read S1 when TDRE is set and then write to the UART data + * register (D). For more efficient interrupt servicing, all data except the final value + * to be written to the buffer must be written to D/C3[T8]. Then S1 can be read + * before writing the final data value, resulting in the clearing of the TRDE + * flag. This is more efficient because the TDRE reasserts until the watermark has + * been exceeded. So, attempting to clear the TDRE with every write will be + * ineffective until sufficient data has been written. + * + * Values: + * - 0 - The amount of data in the transmit buffer is greater than the value + * indicated by TWFIFO[TXWATER]. + * - 1 - The amount of data in the transmit buffer is less than or equal to the + * value indicated by TWFIFO[TXWATER] at some point in time since the flag + * has been cleared. + */ +/*@{*/ +#define BP_UART_S1_TDRE (7U) /*!< Bit position for UART_S1_TDRE. */ +#define BM_UART_S1_TDRE (0x80U) /*!< Bit mask for UART_S1_TDRE. */ +#define BS_UART_S1_TDRE (1U) /*!< Bit field size in bits for UART_S1_TDRE. */ + +/*! @brief Read current value of the UART_S1_TDRE field. */ +#define BR_UART_S1_TDRE(x) (BITBAND_ACCESS8(HW_UART_S1_ADDR(x), BP_UART_S1_TDRE)) +/*@}*/ + +/******************************************************************************* + * HW_UART_S2 - UART Status Register 2 + ******************************************************************************/ + +/*! + * @brief HW_UART_S2 - UART Status Register 2 (RW) + * + * Reset value: 0x00U + * + * The S2 register provides inputs to the MCU for generation of UART interrupts + * or DMA requests. Also, this register can be polled by the MCU to check the + * status of these bits. This register can be read or written at any time, with the + * exception of the MSBF and RXINV bits, which should be changed by the user only + * between transmit and receive packets. + */ +typedef union _hw_uart_s2 +{ + uint8_t U; + struct _hw_uart_s2_bitfields + { + uint8_t RAF : 1; /*!< [0] Receiver Active Flag */ + uint8_t LBKDE : 1; /*!< [1] LIN Break Detection Enable */ + uint8_t BRK13 : 1; /*!< [2] Break Transmit Character Length */ + uint8_t RWUID : 1; /*!< [3] Receive Wakeup Idle Detect */ + uint8_t RXINV : 1; /*!< [4] Receive Data Inversion */ + uint8_t MSBF : 1; /*!< [5] Most Significant Bit First */ + uint8_t RXEDGIF : 1; /*!< [6] RxD Pin Active Edge Interrupt Flag */ + uint8_t LBKDIF : 1; /*!< [7] LIN Break Detect Interrupt Flag */ + } B; +} hw_uart_s2_t; + +/*! + * @name Constants and macros for entire UART_S2 register + */ +/*@{*/ +#define HW_UART_S2_ADDR(x) ((x) + 0x5U) + +#define HW_UART_S2(x) (*(__IO hw_uart_s2_t *) HW_UART_S2_ADDR(x)) +#define HW_UART_S2_RD(x) (HW_UART_S2(x).U) +#define HW_UART_S2_WR(x, v) (HW_UART_S2(x).U = (v)) +#define HW_UART_S2_SET(x, v) (HW_UART_S2_WR(x, HW_UART_S2_RD(x) | (v))) +#define HW_UART_S2_CLR(x, v) (HW_UART_S2_WR(x, HW_UART_S2_RD(x) & ~(v))) +#define HW_UART_S2_TOG(x, v) (HW_UART_S2_WR(x, HW_UART_S2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_S2 bitfields + */ + +/*! + * @name Register UART_S2, field RAF[0] (RO) + * + * RAF is set when the UART receiver detects a logic 0 during the RT1 time + * period of the start bit search. RAF is cleared when the receiver detects an idle + * character when C7816[ISO7816E] is cleared/disabled. When C7816[ISO7816E] is + * enabled, the RAF is cleared if the C7816[TTYPE] = 0 expires or the C7816[TTYPE] = + * 1 expires.In case C7816[ISO7816E] is set and C7816[TTYPE] = 0, it is possible + * to configure the guard time to 12. However, if a NACK is required to be + * transmitted, the data transfer actually takes 13 ETU with the 13th ETU slot being a + * inactive buffer. Therefore, in this situation, the RAF may deassert one ETU + * prior to actually being inactive. + * + * Values: + * - 0 - UART receiver idle/inactive waiting for a start bit. + * - 1 - UART receiver active, RxD input not idle. + */ +/*@{*/ +#define BP_UART_S2_RAF (0U) /*!< Bit position for UART_S2_RAF. */ +#define BM_UART_S2_RAF (0x01U) /*!< Bit mask for UART_S2_RAF. */ +#define BS_UART_S2_RAF (1U) /*!< Bit field size in bits for UART_S2_RAF. */ + +/*! @brief Read current value of the UART_S2_RAF field. */ +#define BR_UART_S2_RAF(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RAF)) +/*@}*/ + +/*! + * @name Register UART_S2, field LBKDE[1] (RW) + * + * Enables the LIN Break detection feature. While LBKDE is set, S1[RDRF], + * S1[NF], S1[FE], and S1[PF] are prevented from setting. When LBKDE is set, see . + * Overrun operation LBKDE must be cleared when C7816[ISO7816E] is set. + * + * Values: + * - 0 - Break character detection is disabled. + * - 1 - Break character is detected at length of 11 bit times if C1[M] = 0 or + * 12 bits time if C1[M] = 1. + */ +/*@{*/ +#define BP_UART_S2_LBKDE (1U) /*!< Bit position for UART_S2_LBKDE. */ +#define BM_UART_S2_LBKDE (0x02U) /*!< Bit mask for UART_S2_LBKDE. */ +#define BS_UART_S2_LBKDE (1U) /*!< Bit field size in bits for UART_S2_LBKDE. */ + +/*! @brief Read current value of the UART_S2_LBKDE field. */ +#define BR_UART_S2_LBKDE(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_LBKDE)) + +/*! @brief Format value for bitfield UART_S2_LBKDE. */ +#define BF_UART_S2_LBKDE(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_LBKDE) & BM_UART_S2_LBKDE) + +/*! @brief Set the LBKDE field to a new value. */ +#define BW_UART_S2_LBKDE(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_LBKDE) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field BRK13[2] (RW) + * + * Determines whether the transmit break character is 10, 11, or 12 bits long, + * or 13 or 14 bits long. See for the length of the break character for the + * different configurations. The detection of a framing error is not affected by this + * field. Transmitting break characters + * + * Values: + * - 0 - Break character is 10, 11, or 12 bits long. + * - 1 - Break character is 13 or 14 bits long. + */ +/*@{*/ +#define BP_UART_S2_BRK13 (2U) /*!< Bit position for UART_S2_BRK13. */ +#define BM_UART_S2_BRK13 (0x04U) /*!< Bit mask for UART_S2_BRK13. */ +#define BS_UART_S2_BRK13 (1U) /*!< Bit field size in bits for UART_S2_BRK13. */ + +/*! @brief Read current value of the UART_S2_BRK13 field. */ +#define BR_UART_S2_BRK13(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_BRK13)) + +/*! @brief Format value for bitfield UART_S2_BRK13. */ +#define BF_UART_S2_BRK13(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_BRK13) & BM_UART_S2_BRK13) + +/*! @brief Set the BRK13 field to a new value. */ +#define BW_UART_S2_BRK13(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_BRK13) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field RWUID[3] (RW) + * + * When RWU is set and WAKE is cleared, this field controls whether the idle + * character that wakes the receiver sets S1[IDLE]. This field must be cleared when + * C7816[ISO7816E] is set/enabled. + * + * Values: + * - 0 - S1[IDLE] is not set upon detection of an idle character. + * - 1 - S1[IDLE] is set upon detection of an idle character. + */ +/*@{*/ +#define BP_UART_S2_RWUID (3U) /*!< Bit position for UART_S2_RWUID. */ +#define BM_UART_S2_RWUID (0x08U) /*!< Bit mask for UART_S2_RWUID. */ +#define BS_UART_S2_RWUID (1U) /*!< Bit field size in bits for UART_S2_RWUID. */ + +/*! @brief Read current value of the UART_S2_RWUID field. */ +#define BR_UART_S2_RWUID(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RWUID)) + +/*! @brief Format value for bitfield UART_S2_RWUID. */ +#define BF_UART_S2_RWUID(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_RWUID) & BM_UART_S2_RWUID) + +/*! @brief Set the RWUID field to a new value. */ +#define BW_UART_S2_RWUID(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RWUID) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field RXINV[4] (RW) + * + * Setting this field reverses the polarity of the received data input. In NRZ + * format, a one is represented by a mark and a zero is represented by a space for + * normal polarity, and the opposite for inverted polarity. In IrDA format, a + * zero is represented by short high pulse in the middle of a bit time remaining + * idle low for a one for normal polarity. A zero is represented by a short low + * pulse in the middle of a bit time remaining idle high for a one for inverted + * polarity. This field is automatically set when C7816[INIT] and C7816[ISO7816E] are + * enabled and an initial character is detected in T = 0 protocol mode. Setting + * RXINV inverts the RxD input for data bits, start and stop bits, break, and + * idle. When C7816[ISO7816E] is set/enabled, only the data bits and the parity bit + * are inverted. + * + * Values: + * - 0 - Receive data is not inverted. + * - 1 - Receive data is inverted. + */ +/*@{*/ +#define BP_UART_S2_RXINV (4U) /*!< Bit position for UART_S2_RXINV. */ +#define BM_UART_S2_RXINV (0x10U) /*!< Bit mask for UART_S2_RXINV. */ +#define BS_UART_S2_RXINV (1U) /*!< Bit field size in bits for UART_S2_RXINV. */ + +/*! @brief Read current value of the UART_S2_RXINV field. */ +#define BR_UART_S2_RXINV(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RXINV)) + +/*! @brief Format value for bitfield UART_S2_RXINV. */ +#define BF_UART_S2_RXINV(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_RXINV) & BM_UART_S2_RXINV) + +/*! @brief Set the RXINV field to a new value. */ +#define BW_UART_S2_RXINV(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RXINV) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field MSBF[5] (RW) + * + * Setting this field reverses the order of the bits that are transmitted and + * received on the wire. This field does not affect the polarity of the bits, the + * location of the parity bit, or the location of the start or stop bits. This + * field is automatically set when C7816[INIT] and C7816[ISO7816E] are enabled and + * an initial character is detected in T = 0 protocol mode. + * + * Values: + * - 0 - LSB (bit0) is the first bit that is transmitted following the start + * bit. Further, the first bit received after the start bit is identified as + * bit0. + * - 1 - MSB (bit8, bit7 or bit6) is the first bit that is transmitted following + * the start bit, depending on the setting of C1[M] and C1[PE]. Further, the + * first bit received after the start bit is identified as bit8, bit7, or + * bit6, depending on the setting of C1[M] and C1[PE]. + */ +/*@{*/ +#define BP_UART_S2_MSBF (5U) /*!< Bit position for UART_S2_MSBF. */ +#define BM_UART_S2_MSBF (0x20U) /*!< Bit mask for UART_S2_MSBF. */ +#define BS_UART_S2_MSBF (1U) /*!< Bit field size in bits for UART_S2_MSBF. */ + +/*! @brief Read current value of the UART_S2_MSBF field. */ +#define BR_UART_S2_MSBF(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_MSBF)) + +/*! @brief Format value for bitfield UART_S2_MSBF. */ +#define BF_UART_S2_MSBF(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_MSBF) & BM_UART_S2_MSBF) + +/*! @brief Set the MSBF field to a new value. */ +#define BW_UART_S2_MSBF(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_MSBF) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field RXEDGIF[6] (W1C) + * + * RXEDGIF is set when an active edge occurs on the RxD pin. The active edge is + * falling if RXINV = 0, and rising if RXINV=1. RXEDGIF is cleared by writing a 1 + * to it. See for additional details. RXEDGIF description The active edge is + * detected only in two wire mode and on receiving data coming from the RxD pin. + * + * Values: + * - 0 - No active edge on the receive pin has occurred. + * - 1 - An active edge on the receive pin has occurred. + */ +/*@{*/ +#define BP_UART_S2_RXEDGIF (6U) /*!< Bit position for UART_S2_RXEDGIF. */ +#define BM_UART_S2_RXEDGIF (0x40U) /*!< Bit mask for UART_S2_RXEDGIF. */ +#define BS_UART_S2_RXEDGIF (1U) /*!< Bit field size in bits for UART_S2_RXEDGIF. */ + +/*! @brief Read current value of the UART_S2_RXEDGIF field. */ +#define BR_UART_S2_RXEDGIF(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RXEDGIF)) + +/*! @brief Format value for bitfield UART_S2_RXEDGIF. */ +#define BF_UART_S2_RXEDGIF(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_RXEDGIF) & BM_UART_S2_RXEDGIF) + +/*! @brief Set the RXEDGIF field to a new value. */ +#define BW_UART_S2_RXEDGIF(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_RXEDGIF) = (v)) +/*@}*/ + +/*! + * @name Register UART_S2, field LBKDIF[7] (W1C) + * + * LBKDIF is set when LBKDE is set and a LIN break character is detected on the + * receiver input. The LIN break characters are 11 consecutive logic 0s if C1[M] + * = 0 or 12 consecutive logic 0s if C1[M] = 1. LBKDIF is set after receiving the + * last LIN break character. LBKDIF is cleared by writing a 1 to it. + * + * Values: + * - 0 - No LIN break character detected. + * - 1 - LIN break character detected. + */ +/*@{*/ +#define BP_UART_S2_LBKDIF (7U) /*!< Bit position for UART_S2_LBKDIF. */ +#define BM_UART_S2_LBKDIF (0x80U) /*!< Bit mask for UART_S2_LBKDIF. */ +#define BS_UART_S2_LBKDIF (1U) /*!< Bit field size in bits for UART_S2_LBKDIF. */ + +/*! @brief Read current value of the UART_S2_LBKDIF field. */ +#define BR_UART_S2_LBKDIF(x) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_LBKDIF)) + +/*! @brief Format value for bitfield UART_S2_LBKDIF. */ +#define BF_UART_S2_LBKDIF(v) ((uint8_t)((uint8_t)(v) << BP_UART_S2_LBKDIF) & BM_UART_S2_LBKDIF) + +/*! @brief Set the LBKDIF field to a new value. */ +#define BW_UART_S2_LBKDIF(x, v) (BITBAND_ACCESS8(HW_UART_S2_ADDR(x), BP_UART_S2_LBKDIF) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_C3 - UART Control Register 3 + ******************************************************************************/ + +/*! + * @brief HW_UART_C3 - UART Control Register 3 (RW) + * + * Reset value: 0x00U + * + * Writing R8 does not have any effect. TXDIR and TXINV can be changed only + * between transmit and receive packets. + */ +typedef union _hw_uart_c3 +{ + uint8_t U; + struct _hw_uart_c3_bitfields + { + uint8_t PEIE : 1; /*!< [0] Parity Error Interrupt Enable */ + uint8_t FEIE : 1; /*!< [1] Framing Error Interrupt Enable */ + uint8_t NEIE : 1; /*!< [2] Noise Error Interrupt Enable */ + uint8_t ORIE : 1; /*!< [3] Overrun Error Interrupt Enable */ + uint8_t TXINV : 1; /*!< [4] Transmit Data Inversion. */ + uint8_t TXDIR : 1; /*!< [5] Transmitter Pin Data Direction in + * Single-Wire mode */ + uint8_t T8 : 1; /*!< [6] Transmit Bit 8 */ + uint8_t R8 : 1; /*!< [7] Received Bit 8 */ + } B; +} hw_uart_c3_t; + +/*! + * @name Constants and macros for entire UART_C3 register + */ +/*@{*/ +#define HW_UART_C3_ADDR(x) ((x) + 0x6U) + +#define HW_UART_C3(x) (*(__IO hw_uart_c3_t *) HW_UART_C3_ADDR(x)) +#define HW_UART_C3_RD(x) (HW_UART_C3(x).U) +#define HW_UART_C3_WR(x, v) (HW_UART_C3(x).U = (v)) +#define HW_UART_C3_SET(x, v) (HW_UART_C3_WR(x, HW_UART_C3_RD(x) | (v))) +#define HW_UART_C3_CLR(x, v) (HW_UART_C3_WR(x, HW_UART_C3_RD(x) & ~(v))) +#define HW_UART_C3_TOG(x, v) (HW_UART_C3_WR(x, HW_UART_C3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C3 bitfields + */ + +/*! + * @name Register UART_C3, field PEIE[0] (RW) + * + * Enables the parity error flag, S1[PF], to generate interrupt requests. + * + * Values: + * - 0 - PF interrupt requests are disabled. + * - 1 - PF interrupt requests are enabled. + */ +/*@{*/ +#define BP_UART_C3_PEIE (0U) /*!< Bit position for UART_C3_PEIE. */ +#define BM_UART_C3_PEIE (0x01U) /*!< Bit mask for UART_C3_PEIE. */ +#define BS_UART_C3_PEIE (1U) /*!< Bit field size in bits for UART_C3_PEIE. */ + +/*! @brief Read current value of the UART_C3_PEIE field. */ +#define BR_UART_C3_PEIE(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_PEIE)) + +/*! @brief Format value for bitfield UART_C3_PEIE. */ +#define BF_UART_C3_PEIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_PEIE) & BM_UART_C3_PEIE) + +/*! @brief Set the PEIE field to a new value. */ +#define BW_UART_C3_PEIE(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_PEIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field FEIE[1] (RW) + * + * Enables the framing error flag, S1[FE], to generate interrupt requests. + * + * Values: + * - 0 - FE interrupt requests are disabled. + * - 1 - FE interrupt requests are enabled. + */ +/*@{*/ +#define BP_UART_C3_FEIE (1U) /*!< Bit position for UART_C3_FEIE. */ +#define BM_UART_C3_FEIE (0x02U) /*!< Bit mask for UART_C3_FEIE. */ +#define BS_UART_C3_FEIE (1U) /*!< Bit field size in bits for UART_C3_FEIE. */ + +/*! @brief Read current value of the UART_C3_FEIE field. */ +#define BR_UART_C3_FEIE(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_FEIE)) + +/*! @brief Format value for bitfield UART_C3_FEIE. */ +#define BF_UART_C3_FEIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_FEIE) & BM_UART_C3_FEIE) + +/*! @brief Set the FEIE field to a new value. */ +#define BW_UART_C3_FEIE(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_FEIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field NEIE[2] (RW) + * + * Enables the noise flag, S1[NF], to generate interrupt requests. + * + * Values: + * - 0 - NF interrupt requests are disabled. + * - 1 - NF interrupt requests are enabled. + */ +/*@{*/ +#define BP_UART_C3_NEIE (2U) /*!< Bit position for UART_C3_NEIE. */ +#define BM_UART_C3_NEIE (0x04U) /*!< Bit mask for UART_C3_NEIE. */ +#define BS_UART_C3_NEIE (1U) /*!< Bit field size in bits for UART_C3_NEIE. */ + +/*! @brief Read current value of the UART_C3_NEIE field. */ +#define BR_UART_C3_NEIE(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_NEIE)) + +/*! @brief Format value for bitfield UART_C3_NEIE. */ +#define BF_UART_C3_NEIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_NEIE) & BM_UART_C3_NEIE) + +/*! @brief Set the NEIE field to a new value. */ +#define BW_UART_C3_NEIE(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_NEIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field ORIE[3] (RW) + * + * Enables the overrun error flag, S1[OR], to generate interrupt requests. + * + * Values: + * - 0 - OR interrupts are disabled. + * - 1 - OR interrupt requests are enabled. + */ +/*@{*/ +#define BP_UART_C3_ORIE (3U) /*!< Bit position for UART_C3_ORIE. */ +#define BM_UART_C3_ORIE (0x08U) /*!< Bit mask for UART_C3_ORIE. */ +#define BS_UART_C3_ORIE (1U) /*!< Bit field size in bits for UART_C3_ORIE. */ + +/*! @brief Read current value of the UART_C3_ORIE field. */ +#define BR_UART_C3_ORIE(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_ORIE)) + +/*! @brief Format value for bitfield UART_C3_ORIE. */ +#define BF_UART_C3_ORIE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_ORIE) & BM_UART_C3_ORIE) + +/*! @brief Set the ORIE field to a new value. */ +#define BW_UART_C3_ORIE(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_ORIE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field TXINV[4] (RW) + * + * Setting this field reverses the polarity of the transmitted data output. In + * NRZ format, a one is represented by a mark and a zero is represented by a space + * for normal polarity, and the opposite for inverted polarity. In IrDA format, + * a zero is represented by short high pulse in the middle of a bit time + * remaining idle low for a one for normal polarity, and a zero is represented by short + * low pulse in the middle of a bit time remaining idle high for a one for + * inverted polarity. This field is automatically set when C7816[INIT] and + * C7816[ISO7816E] are enabled and an initial character is detected in T = 0 protocol mode. + * Setting TXINV inverts all transmitted values, including idle, break, start, and + * stop bits. In loop mode, if TXINV is set, the receiver gets the transmit + * inversion bit when RXINV is disabled. When C7816[ISO7816E] is set/enabled then only + * the transmitted data bits and parity bit are inverted. + * + * Values: + * - 0 - Transmit data is not inverted. + * - 1 - Transmit data is inverted. + */ +/*@{*/ +#define BP_UART_C3_TXINV (4U) /*!< Bit position for UART_C3_TXINV. */ +#define BM_UART_C3_TXINV (0x10U) /*!< Bit mask for UART_C3_TXINV. */ +#define BS_UART_C3_TXINV (1U) /*!< Bit field size in bits for UART_C3_TXINV. */ + +/*! @brief Read current value of the UART_C3_TXINV field. */ +#define BR_UART_C3_TXINV(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_TXINV)) + +/*! @brief Format value for bitfield UART_C3_TXINV. */ +#define BF_UART_C3_TXINV(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_TXINV) & BM_UART_C3_TXINV) + +/*! @brief Set the TXINV field to a new value. */ +#define BW_UART_C3_TXINV(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_TXINV) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field TXDIR[5] (RW) + * + * Determines whether the TXD pin is used as an input or output in the + * single-wire mode of operation. This field is relevant only to the single wire mode. + * When C7816[ISO7816E] is set/enabled and C7816[TTYPE] = 1, this field is + * automatically cleared after the requested block is transmitted. This condition is + * detected when TL7816[TLEN] = 0 and 4 additional characters are transmitted. + * Additionally, if C7816[ISO7816E] is set/enabled and C7816[TTYPE] = 0 and a NACK is + * being transmitted, the hardware automatically overrides this field as needed. In + * this situation, TXDIR does not reflect the temporary state associated with + * the NACK. + * + * Values: + * - 0 - TXD pin is an input in single wire mode. + * - 1 - TXD pin is an output in single wire mode. + */ +/*@{*/ +#define BP_UART_C3_TXDIR (5U) /*!< Bit position for UART_C3_TXDIR. */ +#define BM_UART_C3_TXDIR (0x20U) /*!< Bit mask for UART_C3_TXDIR. */ +#define BS_UART_C3_TXDIR (1U) /*!< Bit field size in bits for UART_C3_TXDIR. */ + +/*! @brief Read current value of the UART_C3_TXDIR field. */ +#define BR_UART_C3_TXDIR(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_TXDIR)) + +/*! @brief Format value for bitfield UART_C3_TXDIR. */ +#define BF_UART_C3_TXDIR(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_TXDIR) & BM_UART_C3_TXDIR) + +/*! @brief Set the TXDIR field to a new value. */ +#define BW_UART_C3_TXDIR(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_TXDIR) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field T8[6] (RW) + * + * T8 is the ninth data bit transmitted when the UART is configured for 9-bit + * data format, that is, if C1[M] = 1 or C4[M10] = 1. If the value of T8 is the + * same as in the previous transmission, T8 does not have to be rewritten. The same + * value is transmitted until T8 is rewritten. To correctly transmit the 9th bit, + * write UARTx_C3[T8] to the desired value, then write the UARTx_D register with + * the remaining data. + */ +/*@{*/ +#define BP_UART_C3_T8 (6U) /*!< Bit position for UART_C3_T8. */ +#define BM_UART_C3_T8 (0x40U) /*!< Bit mask for UART_C3_T8. */ +#define BS_UART_C3_T8 (1U) /*!< Bit field size in bits for UART_C3_T8. */ + +/*! @brief Read current value of the UART_C3_T8 field. */ +#define BR_UART_C3_T8(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_T8)) + +/*! @brief Format value for bitfield UART_C3_T8. */ +#define BF_UART_C3_T8(v) ((uint8_t)((uint8_t)(v) << BP_UART_C3_T8) & BM_UART_C3_T8) + +/*! @brief Set the T8 field to a new value. */ +#define BW_UART_C3_T8(x, v) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_T8) = (v)) +/*@}*/ + +/*! + * @name Register UART_C3, field R8[7] (RO) + * + * R8 is the ninth data bit received when the UART is configured for 9-bit data + * format, that is, if C1[M] = 1 or C4[M10] = 1. The R8 value corresponds to the + * current data value in the UARTx_D register. To read the 9th bit, read the + * value of UARTx_C3[R8], then read the UARTx_D register. + */ +/*@{*/ +#define BP_UART_C3_R8 (7U) /*!< Bit position for UART_C3_R8. */ +#define BM_UART_C3_R8 (0x80U) /*!< Bit mask for UART_C3_R8. */ +#define BS_UART_C3_R8 (1U) /*!< Bit field size in bits for UART_C3_R8. */ + +/*! @brief Read current value of the UART_C3_R8 field. */ +#define BR_UART_C3_R8(x) (BITBAND_ACCESS8(HW_UART_C3_ADDR(x), BP_UART_C3_R8)) +/*@}*/ + +/******************************************************************************* + * HW_UART_D - UART Data Register + ******************************************************************************/ + +/*! + * @brief HW_UART_D - UART Data Register (RW) + * + * Reset value: 0x00U + * + * This register is actually two separate registers. Reads return the contents + * of the read-only receive data register and writes go to the write-only transmit + * data register. In 8-bit or 9-bit data format, only UART data register (D) + * needs to be accessed to clear the S1[RDRF] bit (assuming receiver buffer level is + * less than RWFIFO[RXWATER]). The C3 register needs to be read, prior to the D + * register, only if the ninth bit of data needs to be captured. Similarly, the + * ED register needs to be read, prior to the D register, only if the additional + * flag data for the dataword needs to be captured. In the normal 8-bit mode (M + * bit cleared) if the parity is enabled, you get seven data bits and one parity + * bit. That one parity bit is loaded into the D register. So, for the data bits, + * mask off the parity bit from the value you read out of this register. When + * transmitting in 9-bit data format and using 8-bit write instructions, write first + * to transmit bit 8 in UART control register 3 (C3[T8]), then D. A write to + * C3[T8] stores the data in a temporary register. If D register is written first, + * and then the new data on data bus is stored in D, the temporary value written by + * the last write to C3[T8] gets stored in the C3[T8] register. + */ +typedef union _hw_uart_d +{ + uint8_t U; + struct _hw_uart_d_bitfields + { + uint8_t RT : 8; /*!< [7:0] */ + } B; +} hw_uart_d_t; + +/*! + * @name Constants and macros for entire UART_D register + */ +/*@{*/ +#define HW_UART_D_ADDR(x) ((x) + 0x7U) + +#define HW_UART_D(x) (*(__IO hw_uart_d_t *) HW_UART_D_ADDR(x)) +#define HW_UART_D_RD(x) (HW_UART_D(x).U) +#define HW_UART_D_WR(x, v) (HW_UART_D(x).U = (v)) +#define HW_UART_D_SET(x, v) (HW_UART_D_WR(x, HW_UART_D_RD(x) | (v))) +#define HW_UART_D_CLR(x, v) (HW_UART_D_WR(x, HW_UART_D_RD(x) & ~(v))) +#define HW_UART_D_TOG(x, v) (HW_UART_D_WR(x, HW_UART_D_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_D bitfields + */ + +/*! + * @name Register UART_D, field RT[7:0] (RW) + * + * Reads return the contents of the read-only receive data register and writes + * go to the write-only transmit data register. + */ +/*@{*/ +#define BP_UART_D_RT (0U) /*!< Bit position for UART_D_RT. */ +#define BM_UART_D_RT (0xFFU) /*!< Bit mask for UART_D_RT. */ +#define BS_UART_D_RT (8U) /*!< Bit field size in bits for UART_D_RT. */ + +/*! @brief Read current value of the UART_D_RT field. */ +#define BR_UART_D_RT(x) (HW_UART_D(x).U) + +/*! @brief Format value for bitfield UART_D_RT. */ +#define BF_UART_D_RT(v) ((uint8_t)((uint8_t)(v) << BP_UART_D_RT) & BM_UART_D_RT) + +/*! @brief Set the RT field to a new value. */ +#define BW_UART_D_RT(x, v) (HW_UART_D_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_MA1 - UART Match Address Registers 1 + ******************************************************************************/ + +/*! + * @brief HW_UART_MA1 - UART Match Address Registers 1 (RW) + * + * Reset value: 0x00U + * + * The MA1 and MA2 registers are compared to input data addresses when the most + * significant bit is set and the associated C4[MAEN] field is set. If a match + * occurs, the following data is transferred to the data register. If a match + * fails, the following data is discarded. These registers can be read and written at + * anytime. + */ +typedef union _hw_uart_ma1 +{ + uint8_t U; + struct _hw_uart_ma1_bitfields + { + uint8_t MA : 8; /*!< [7:0] Match Address */ + } B; +} hw_uart_ma1_t; + +/*! + * @name Constants and macros for entire UART_MA1 register + */ +/*@{*/ +#define HW_UART_MA1_ADDR(x) ((x) + 0x8U) + +#define HW_UART_MA1(x) (*(__IO hw_uart_ma1_t *) HW_UART_MA1_ADDR(x)) +#define HW_UART_MA1_RD(x) (HW_UART_MA1(x).U) +#define HW_UART_MA1_WR(x, v) (HW_UART_MA1(x).U = (v)) +#define HW_UART_MA1_SET(x, v) (HW_UART_MA1_WR(x, HW_UART_MA1_RD(x) | (v))) +#define HW_UART_MA1_CLR(x, v) (HW_UART_MA1_WR(x, HW_UART_MA1_RD(x) & ~(v))) +#define HW_UART_MA1_TOG(x, v) (HW_UART_MA1_WR(x, HW_UART_MA1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_MA1 bitfields + */ + +/*! + * @name Register UART_MA1, field MA[7:0] (RW) + */ +/*@{*/ +#define BP_UART_MA1_MA (0U) /*!< Bit position for UART_MA1_MA. */ +#define BM_UART_MA1_MA (0xFFU) /*!< Bit mask for UART_MA1_MA. */ +#define BS_UART_MA1_MA (8U) /*!< Bit field size in bits for UART_MA1_MA. */ + +/*! @brief Read current value of the UART_MA1_MA field. */ +#define BR_UART_MA1_MA(x) (HW_UART_MA1(x).U) + +/*! @brief Format value for bitfield UART_MA1_MA. */ +#define BF_UART_MA1_MA(v) ((uint8_t)((uint8_t)(v) << BP_UART_MA1_MA) & BM_UART_MA1_MA) + +/*! @brief Set the MA field to a new value. */ +#define BW_UART_MA1_MA(x, v) (HW_UART_MA1_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_MA2 - UART Match Address Registers 2 + ******************************************************************************/ + +/*! + * @brief HW_UART_MA2 - UART Match Address Registers 2 (RW) + * + * Reset value: 0x00U + * + * These registers can be read and written at anytime. The MA1 and MA2 registers + * are compared to input data addresses when the most significant bit is set and + * the associated C4[MAEN] field is set. If a match occurs, the following data + * is transferred to the data register. If a match fails, the following data is + * discarded. + */ +typedef union _hw_uart_ma2 +{ + uint8_t U; + struct _hw_uart_ma2_bitfields + { + uint8_t MA : 8; /*!< [7:0] Match Address */ + } B; +} hw_uart_ma2_t; + +/*! + * @name Constants and macros for entire UART_MA2 register + */ +/*@{*/ +#define HW_UART_MA2_ADDR(x) ((x) + 0x9U) + +#define HW_UART_MA2(x) (*(__IO hw_uart_ma2_t *) HW_UART_MA2_ADDR(x)) +#define HW_UART_MA2_RD(x) (HW_UART_MA2(x).U) +#define HW_UART_MA2_WR(x, v) (HW_UART_MA2(x).U = (v)) +#define HW_UART_MA2_SET(x, v) (HW_UART_MA2_WR(x, HW_UART_MA2_RD(x) | (v))) +#define HW_UART_MA2_CLR(x, v) (HW_UART_MA2_WR(x, HW_UART_MA2_RD(x) & ~(v))) +#define HW_UART_MA2_TOG(x, v) (HW_UART_MA2_WR(x, HW_UART_MA2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_MA2 bitfields + */ + +/*! + * @name Register UART_MA2, field MA[7:0] (RW) + */ +/*@{*/ +#define BP_UART_MA2_MA (0U) /*!< Bit position for UART_MA2_MA. */ +#define BM_UART_MA2_MA (0xFFU) /*!< Bit mask for UART_MA2_MA. */ +#define BS_UART_MA2_MA (8U) /*!< Bit field size in bits for UART_MA2_MA. */ + +/*! @brief Read current value of the UART_MA2_MA field. */ +#define BR_UART_MA2_MA(x) (HW_UART_MA2(x).U) + +/*! @brief Format value for bitfield UART_MA2_MA. */ +#define BF_UART_MA2_MA(v) ((uint8_t)((uint8_t)(v) << BP_UART_MA2_MA) & BM_UART_MA2_MA) + +/*! @brief Set the MA field to a new value. */ +#define BW_UART_MA2_MA(x, v) (HW_UART_MA2_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_C4 - UART Control Register 4 + ******************************************************************************/ + +/*! + * @brief HW_UART_C4 - UART Control Register 4 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_uart_c4 +{ + uint8_t U; + struct _hw_uart_c4_bitfields + { + uint8_t BRFA : 5; /*!< [4:0] Baud Rate Fine Adjust */ + uint8_t M10 : 1; /*!< [5] 10-bit Mode select */ + uint8_t MAEN2 : 1; /*!< [6] Match Address Mode Enable 2 */ + uint8_t MAEN1 : 1; /*!< [7] Match Address Mode Enable 1 */ + } B; +} hw_uart_c4_t; + +/*! + * @name Constants and macros for entire UART_C4 register + */ +/*@{*/ +#define HW_UART_C4_ADDR(x) ((x) + 0xAU) + +#define HW_UART_C4(x) (*(__IO hw_uart_c4_t *) HW_UART_C4_ADDR(x)) +#define HW_UART_C4_RD(x) (HW_UART_C4(x).U) +#define HW_UART_C4_WR(x, v) (HW_UART_C4(x).U = (v)) +#define HW_UART_C4_SET(x, v) (HW_UART_C4_WR(x, HW_UART_C4_RD(x) | (v))) +#define HW_UART_C4_CLR(x, v) (HW_UART_C4_WR(x, HW_UART_C4_RD(x) & ~(v))) +#define HW_UART_C4_TOG(x, v) (HW_UART_C4_WR(x, HW_UART_C4_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C4 bitfields + */ + +/*! + * @name Register UART_C4, field BRFA[4:0] (RW) + * + * This bit field is used to add more timing resolution to the average baud + * frequency, in increments of 1/32. See Baud rate generation for more information. + */ +/*@{*/ +#define BP_UART_C4_BRFA (0U) /*!< Bit position for UART_C4_BRFA. */ +#define BM_UART_C4_BRFA (0x1FU) /*!< Bit mask for UART_C4_BRFA. */ +#define BS_UART_C4_BRFA (5U) /*!< Bit field size in bits for UART_C4_BRFA. */ + +/*! @brief Read current value of the UART_C4_BRFA field. */ +#define BR_UART_C4_BRFA(x) (HW_UART_C4(x).B.BRFA) + +/*! @brief Format value for bitfield UART_C4_BRFA. */ +#define BF_UART_C4_BRFA(v) ((uint8_t)((uint8_t)(v) << BP_UART_C4_BRFA) & BM_UART_C4_BRFA) + +/*! @brief Set the BRFA field to a new value. */ +#define BW_UART_C4_BRFA(x, v) (HW_UART_C4_WR(x, (HW_UART_C4_RD(x) & ~BM_UART_C4_BRFA) | BF_UART_C4_BRFA(v))) +/*@}*/ + +/*! + * @name Register UART_C4, field M10[5] (RW) + * + * Causes a tenth, non-memory mapped bit to be part of the serial transmission. + * This tenth bit is generated and interpreted as a parity bit. The M10 field + * does not affect the LIN send or detect break behavior. If M10 is set, then both + * C1[M] and C1[PE] must also be set. This field must be cleared when + * C7816[ISO7816E] is set/enabled. See Data format (non ISO-7816) for more information. + * + * Values: + * - 0 - The parity bit is the ninth bit in the serial transmission. + * - 1 - The parity bit is the tenth bit in the serial transmission. + */ +/*@{*/ +#define BP_UART_C4_M10 (5U) /*!< Bit position for UART_C4_M10. */ +#define BM_UART_C4_M10 (0x20U) /*!< Bit mask for UART_C4_M10. */ +#define BS_UART_C4_M10 (1U) /*!< Bit field size in bits for UART_C4_M10. */ + +/*! @brief Read current value of the UART_C4_M10 field. */ +#define BR_UART_C4_M10(x) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_M10)) + +/*! @brief Format value for bitfield UART_C4_M10. */ +#define BF_UART_C4_M10(v) ((uint8_t)((uint8_t)(v) << BP_UART_C4_M10) & BM_UART_C4_M10) + +/*! @brief Set the M10 field to a new value. */ +#define BW_UART_C4_M10(x, v) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_M10) = (v)) +/*@}*/ + +/*! + * @name Register UART_C4, field MAEN2[6] (RW) + * + * See Match address operation for more information. + * + * Values: + * - 0 - All data received is transferred to the data buffer if MAEN1 is cleared. + * - 1 - All data received with the most significant bit cleared, is discarded. + * All data received with the most significant bit set, is compared with + * contents of MA2 register. If no match occurs, the data is discarded. If a + * match occurs, data is transferred to the data buffer. This field must be + * cleared when C7816[ISO7816E] is set/enabled. + */ +/*@{*/ +#define BP_UART_C4_MAEN2 (6U) /*!< Bit position for UART_C4_MAEN2. */ +#define BM_UART_C4_MAEN2 (0x40U) /*!< Bit mask for UART_C4_MAEN2. */ +#define BS_UART_C4_MAEN2 (1U) /*!< Bit field size in bits for UART_C4_MAEN2. */ + +/*! @brief Read current value of the UART_C4_MAEN2 field. */ +#define BR_UART_C4_MAEN2(x) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_MAEN2)) + +/*! @brief Format value for bitfield UART_C4_MAEN2. */ +#define BF_UART_C4_MAEN2(v) ((uint8_t)((uint8_t)(v) << BP_UART_C4_MAEN2) & BM_UART_C4_MAEN2) + +/*! @brief Set the MAEN2 field to a new value. */ +#define BW_UART_C4_MAEN2(x, v) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_MAEN2) = (v)) +/*@}*/ + +/*! + * @name Register UART_C4, field MAEN1[7] (RW) + * + * See Match address operation for more information. + * + * Values: + * - 0 - All data received is transferred to the data buffer if MAEN2 is cleared. + * - 1 - All data received with the most significant bit cleared, is discarded. + * All data received with the most significant bit set, is compared with + * contents of MA1 register. If no match occurs, the data is discarded. If match + * occurs, data is transferred to the data buffer. This field must be cleared + * when C7816[ISO7816E] is set/enabled. + */ +/*@{*/ +#define BP_UART_C4_MAEN1 (7U) /*!< Bit position for UART_C4_MAEN1. */ +#define BM_UART_C4_MAEN1 (0x80U) /*!< Bit mask for UART_C4_MAEN1. */ +#define BS_UART_C4_MAEN1 (1U) /*!< Bit field size in bits for UART_C4_MAEN1. */ + +/*! @brief Read current value of the UART_C4_MAEN1 field. */ +#define BR_UART_C4_MAEN1(x) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_MAEN1)) + +/*! @brief Format value for bitfield UART_C4_MAEN1. */ +#define BF_UART_C4_MAEN1(v) ((uint8_t)((uint8_t)(v) << BP_UART_C4_MAEN1) & BM_UART_C4_MAEN1) + +/*! @brief Set the MAEN1 field to a new value. */ +#define BW_UART_C4_MAEN1(x, v) (BITBAND_ACCESS8(HW_UART_C4_ADDR(x), BP_UART_C4_MAEN1) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_C5 - UART Control Register 5 + ******************************************************************************/ + +/*! + * @brief HW_UART_C5 - UART Control Register 5 (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_uart_c5 +{ + uint8_t U; + struct _hw_uart_c5_bitfields + { + uint8_t RESERVED0 : 5; /*!< [4:0] */ + uint8_t RDMAS : 1; /*!< [5] Receiver Full DMA Select */ + uint8_t RESERVED1 : 1; /*!< [6] */ + uint8_t TDMAS : 1; /*!< [7] Transmitter DMA Select */ + } B; +} hw_uart_c5_t; + +/*! + * @name Constants and macros for entire UART_C5 register + */ +/*@{*/ +#define HW_UART_C5_ADDR(x) ((x) + 0xBU) + +#define HW_UART_C5(x) (*(__IO hw_uart_c5_t *) HW_UART_C5_ADDR(x)) +#define HW_UART_C5_RD(x) (HW_UART_C5(x).U) +#define HW_UART_C5_WR(x, v) (HW_UART_C5(x).U = (v)) +#define HW_UART_C5_SET(x, v) (HW_UART_C5_WR(x, HW_UART_C5_RD(x) | (v))) +#define HW_UART_C5_CLR(x, v) (HW_UART_C5_WR(x, HW_UART_C5_RD(x) & ~(v))) +#define HW_UART_C5_TOG(x, v) (HW_UART_C5_WR(x, HW_UART_C5_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C5 bitfields + */ + +/*! + * @name Register UART_C5, field RDMAS[5] (RW) + * + * Configures the receiver data register full flag, S1[RDRF], to generate + * interrupt or DMA requests if C2[RIE] is set. If C2[RIE] is cleared, and S1[RDRF] is + * set, the RDRF DMA and RDFR interrupt request signals are not asserted, + * regardless of the state of RDMAS. + * + * Values: + * - 0 - If C2[RIE] and S1[RDRF] are set, the RDFR interrupt request signal is + * asserted to request an interrupt service. + * - 1 - If C2[RIE] and S1[RDRF] are set, the RDRF DMA request signal is + * asserted to request a DMA transfer. + */ +/*@{*/ +#define BP_UART_C5_RDMAS (5U) /*!< Bit position for UART_C5_RDMAS. */ +#define BM_UART_C5_RDMAS (0x20U) /*!< Bit mask for UART_C5_RDMAS. */ +#define BS_UART_C5_RDMAS (1U) /*!< Bit field size in bits for UART_C5_RDMAS. */ + +/*! @brief Read current value of the UART_C5_RDMAS field. */ +#define BR_UART_C5_RDMAS(x) (BITBAND_ACCESS8(HW_UART_C5_ADDR(x), BP_UART_C5_RDMAS)) + +/*! @brief Format value for bitfield UART_C5_RDMAS. */ +#define BF_UART_C5_RDMAS(v) ((uint8_t)((uint8_t)(v) << BP_UART_C5_RDMAS) & BM_UART_C5_RDMAS) + +/*! @brief Set the RDMAS field to a new value. */ +#define BW_UART_C5_RDMAS(x, v) (BITBAND_ACCESS8(HW_UART_C5_ADDR(x), BP_UART_C5_RDMAS) = (v)) +/*@}*/ + +/*! + * @name Register UART_C5, field TDMAS[7] (RW) + * + * Configures the transmit data register empty flag, S1[TDRE], to generate + * interrupt or DMA requests if C2[TIE] is set. If C2[TIE] is cleared, TDRE DMA and + * TDRE interrupt request signals are not asserted when the TDRE flag is set, + * regardless of the state of TDMAS. If C2[TIE] and TDMAS are both set, then C2[TCIE] + * must be cleared, and D must not be written unless a DMA request is being + * serviced. + * + * Values: + * - 0 - If C2[TIE] is set and the S1[TDRE] flag is set, the TDRE interrupt + * request signal is asserted to request interrupt service. + * - 1 - If C2[TIE] is set and the S1[TDRE] flag is set, the TDRE DMA request + * signal is asserted to request a DMA transfer. + */ +/*@{*/ +#define BP_UART_C5_TDMAS (7U) /*!< Bit position for UART_C5_TDMAS. */ +#define BM_UART_C5_TDMAS (0x80U) /*!< Bit mask for UART_C5_TDMAS. */ +#define BS_UART_C5_TDMAS (1U) /*!< Bit field size in bits for UART_C5_TDMAS. */ + +/*! @brief Read current value of the UART_C5_TDMAS field. */ +#define BR_UART_C5_TDMAS(x) (BITBAND_ACCESS8(HW_UART_C5_ADDR(x), BP_UART_C5_TDMAS)) + +/*! @brief Format value for bitfield UART_C5_TDMAS. */ +#define BF_UART_C5_TDMAS(v) ((uint8_t)((uint8_t)(v) << BP_UART_C5_TDMAS) & BM_UART_C5_TDMAS) + +/*! @brief Set the TDMAS field to a new value. */ +#define BW_UART_C5_TDMAS(x, v) (BITBAND_ACCESS8(HW_UART_C5_ADDR(x), BP_UART_C5_TDMAS) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_ED - UART Extended Data Register + ******************************************************************************/ + +/*! + * @brief HW_UART_ED - UART Extended Data Register (RO) + * + * Reset value: 0x00U + * + * This register contains additional information flags that are stored with a + * received dataword. This register may be read at any time but contains valid data + * only if there is a dataword in the receive FIFO. The data contained in this + * register represents additional information regarding the conditions on which a + * dataword was received. The importance of this data varies with the + * application, and in some cases maybe completely optional. These fields automatically + * update to reflect the conditions of the next dataword whenever D is read. If + * S1[NF] and S1[PF] have not been set since the last time the receive buffer was + * empty, the NOISY and PARITYE fields will be zero. + */ +typedef union _hw_uart_ed +{ + uint8_t U; + struct _hw_uart_ed_bitfields + { + uint8_t RESERVED0 : 6; /*!< [5:0] */ + uint8_t PARITYE : 1; /*!< [6] */ + uint8_t NOISY : 1; /*!< [7] */ + } B; +} hw_uart_ed_t; + +/*! + * @name Constants and macros for entire UART_ED register + */ +/*@{*/ +#define HW_UART_ED_ADDR(x) ((x) + 0xCU) + +#define HW_UART_ED(x) (*(__I hw_uart_ed_t *) HW_UART_ED_ADDR(x)) +#define HW_UART_ED_RD(x) (HW_UART_ED(x).U) +/*@}*/ + +/* + * Constants & macros for individual UART_ED bitfields + */ + +/*! + * @name Register UART_ED, field PARITYE[6] (RO) + * + * The current received dataword contained in D and C3[R8] was received with a + * parity error. + * + * Values: + * - 0 - The dataword was received without a parity error. + * - 1 - The dataword was received with a parity error. + */ +/*@{*/ +#define BP_UART_ED_PARITYE (6U) /*!< Bit position for UART_ED_PARITYE. */ +#define BM_UART_ED_PARITYE (0x40U) /*!< Bit mask for UART_ED_PARITYE. */ +#define BS_UART_ED_PARITYE (1U) /*!< Bit field size in bits for UART_ED_PARITYE. */ + +/*! @brief Read current value of the UART_ED_PARITYE field. */ +#define BR_UART_ED_PARITYE(x) (BITBAND_ACCESS8(HW_UART_ED_ADDR(x), BP_UART_ED_PARITYE)) +/*@}*/ + +/*! + * @name Register UART_ED, field NOISY[7] (RO) + * + * The current received dataword contained in D and C3[R8] was received with + * noise. + * + * Values: + * - 0 - The dataword was received without noise. + * - 1 - The data was received with noise. + */ +/*@{*/ +#define BP_UART_ED_NOISY (7U) /*!< Bit position for UART_ED_NOISY. */ +#define BM_UART_ED_NOISY (0x80U) /*!< Bit mask for UART_ED_NOISY. */ +#define BS_UART_ED_NOISY (1U) /*!< Bit field size in bits for UART_ED_NOISY. */ + +/*! @brief Read current value of the UART_ED_NOISY field. */ +#define BR_UART_ED_NOISY(x) (BITBAND_ACCESS8(HW_UART_ED_ADDR(x), BP_UART_ED_NOISY)) +/*@}*/ + +/******************************************************************************* + * HW_UART_MODEM - UART Modem Register + ******************************************************************************/ + +/*! + * @brief HW_UART_MODEM - UART Modem Register (RW) + * + * Reset value: 0x00U + * + * The MODEM register controls options for setting the modem configuration. + * RXRTSE, TXRTSPOL, TXRTSE, and TXCTSE must all be cleared when C7816[ISO7816EN] is + * enabled. This will cause the RTS to deassert during ISO-7816 wait times. The + * ISO-7816 protocol does not use the RTS and CTS signals. + */ +typedef union _hw_uart_modem +{ + uint8_t U; + struct _hw_uart_modem_bitfields + { + uint8_t TXCTSE : 1; /*!< [0] Transmitter clear-to-send enable */ + uint8_t TXRTSE : 1; /*!< [1] Transmitter request-to-send enable */ + uint8_t TXRTSPOL : 1; /*!< [2] Transmitter request-to-send polarity */ + uint8_t RXRTSE : 1; /*!< [3] Receiver request-to-send enable */ + uint8_t RESERVED0 : 4; /*!< [7:4] */ + } B; +} hw_uart_modem_t; + +/*! + * @name Constants and macros for entire UART_MODEM register + */ +/*@{*/ +#define HW_UART_MODEM_ADDR(x) ((x) + 0xDU) + +#define HW_UART_MODEM(x) (*(__IO hw_uart_modem_t *) HW_UART_MODEM_ADDR(x)) +#define HW_UART_MODEM_RD(x) (HW_UART_MODEM(x).U) +#define HW_UART_MODEM_WR(x, v) (HW_UART_MODEM(x).U = (v)) +#define HW_UART_MODEM_SET(x, v) (HW_UART_MODEM_WR(x, HW_UART_MODEM_RD(x) | (v))) +#define HW_UART_MODEM_CLR(x, v) (HW_UART_MODEM_WR(x, HW_UART_MODEM_RD(x) & ~(v))) +#define HW_UART_MODEM_TOG(x, v) (HW_UART_MODEM_WR(x, HW_UART_MODEM_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_MODEM bitfields + */ + +/*! + * @name Register UART_MODEM, field TXCTSE[0] (RW) + * + * TXCTSE controls the operation of the transmitter. TXCTSE can be set + * independently from the state of TXRTSE and RXRTSE. + * + * Values: + * - 0 - CTS has no effect on the transmitter. + * - 1 - Enables clear-to-send operation. The transmitter checks the state of + * CTS each time it is ready to send a character. If CTS is asserted, the + * character is sent. If CTS is deasserted, the signal TXD remains in the mark + * state and transmission is delayed until CTS is asserted. Changes in CTS as a + * character is being sent do not affect its transmission. + */ +/*@{*/ +#define BP_UART_MODEM_TXCTSE (0U) /*!< Bit position for UART_MODEM_TXCTSE. */ +#define BM_UART_MODEM_TXCTSE (0x01U) /*!< Bit mask for UART_MODEM_TXCTSE. */ +#define BS_UART_MODEM_TXCTSE (1U) /*!< Bit field size in bits for UART_MODEM_TXCTSE. */ + +/*! @brief Read current value of the UART_MODEM_TXCTSE field. */ +#define BR_UART_MODEM_TXCTSE(x) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXCTSE)) + +/*! @brief Format value for bitfield UART_MODEM_TXCTSE. */ +#define BF_UART_MODEM_TXCTSE(v) ((uint8_t)((uint8_t)(v) << BP_UART_MODEM_TXCTSE) & BM_UART_MODEM_TXCTSE) + +/*! @brief Set the TXCTSE field to a new value. */ +#define BW_UART_MODEM_TXCTSE(x, v) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXCTSE) = (v)) +/*@}*/ + +/*! + * @name Register UART_MODEM, field TXRTSE[1] (RW) + * + * Controls RTS before and after a transmission. + * + * Values: + * - 0 - The transmitter has no effect on RTS. + * - 1 - When a character is placed into an empty transmitter data buffer , RTS + * asserts one bit time before the start bit is transmitted. RTS deasserts + * one bit time after all characters in the transmitter data buffer and shift + * register are completely sent, including the last stop bit. (FIFO) (FIFO) + */ +/*@{*/ +#define BP_UART_MODEM_TXRTSE (1U) /*!< Bit position for UART_MODEM_TXRTSE. */ +#define BM_UART_MODEM_TXRTSE (0x02U) /*!< Bit mask for UART_MODEM_TXRTSE. */ +#define BS_UART_MODEM_TXRTSE (1U) /*!< Bit field size in bits for UART_MODEM_TXRTSE. */ + +/*! @brief Read current value of the UART_MODEM_TXRTSE field. */ +#define BR_UART_MODEM_TXRTSE(x) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXRTSE)) + +/*! @brief Format value for bitfield UART_MODEM_TXRTSE. */ +#define BF_UART_MODEM_TXRTSE(v) ((uint8_t)((uint8_t)(v) << BP_UART_MODEM_TXRTSE) & BM_UART_MODEM_TXRTSE) + +/*! @brief Set the TXRTSE field to a new value. */ +#define BW_UART_MODEM_TXRTSE(x, v) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXRTSE) = (v)) +/*@}*/ + +/*! + * @name Register UART_MODEM, field TXRTSPOL[2] (RW) + * + * Controls the polarity of the transmitter RTS. TXRTSPOL does not affect the + * polarity of the receiver RTS. RTS will remain negated in the active low state + * unless TXRTSE is set. + * + * Values: + * - 0 - Transmitter RTS is active low. + * - 1 - Transmitter RTS is active high. + */ +/*@{*/ +#define BP_UART_MODEM_TXRTSPOL (2U) /*!< Bit position for UART_MODEM_TXRTSPOL. */ +#define BM_UART_MODEM_TXRTSPOL (0x04U) /*!< Bit mask for UART_MODEM_TXRTSPOL. */ +#define BS_UART_MODEM_TXRTSPOL (1U) /*!< Bit field size in bits for UART_MODEM_TXRTSPOL. */ + +/*! @brief Read current value of the UART_MODEM_TXRTSPOL field. */ +#define BR_UART_MODEM_TXRTSPOL(x) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXRTSPOL)) + +/*! @brief Format value for bitfield UART_MODEM_TXRTSPOL. */ +#define BF_UART_MODEM_TXRTSPOL(v) ((uint8_t)((uint8_t)(v) << BP_UART_MODEM_TXRTSPOL) & BM_UART_MODEM_TXRTSPOL) + +/*! @brief Set the TXRTSPOL field to a new value. */ +#define BW_UART_MODEM_TXRTSPOL(x, v) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_TXRTSPOL) = (v)) +/*@}*/ + +/*! + * @name Register UART_MODEM, field RXRTSE[3] (RW) + * + * Allows the RTS output to control the CTS input of the transmitting device to + * prevent receiver overrun. Do not set both RXRTSE and TXRTSE. + * + * Values: + * - 0 - The receiver has no effect on RTS. + * - 1 - RTS is deasserted if the number of characters in the receiver data + * register (FIFO) is equal to or greater than RWFIFO[RXWATER]. RTS is asserted + * when the number of characters in the receiver data register (FIFO) is less + * than RWFIFO[RXWATER]. + */ +/*@{*/ +#define BP_UART_MODEM_RXRTSE (3U) /*!< Bit position for UART_MODEM_RXRTSE. */ +#define BM_UART_MODEM_RXRTSE (0x08U) /*!< Bit mask for UART_MODEM_RXRTSE. */ +#define BS_UART_MODEM_RXRTSE (1U) /*!< Bit field size in bits for UART_MODEM_RXRTSE. */ + +/*! @brief Read current value of the UART_MODEM_RXRTSE field. */ +#define BR_UART_MODEM_RXRTSE(x) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_RXRTSE)) + +/*! @brief Format value for bitfield UART_MODEM_RXRTSE. */ +#define BF_UART_MODEM_RXRTSE(v) ((uint8_t)((uint8_t)(v) << BP_UART_MODEM_RXRTSE) & BM_UART_MODEM_RXRTSE) + +/*! @brief Set the RXRTSE field to a new value. */ +#define BW_UART_MODEM_RXRTSE(x, v) (BITBAND_ACCESS8(HW_UART_MODEM_ADDR(x), BP_UART_MODEM_RXRTSE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_IR - UART Infrared Register + ******************************************************************************/ + +/*! + * @brief HW_UART_IR - UART Infrared Register (RW) + * + * Reset value: 0x00U + * + * The IR register controls options for setting the infrared configuration. + */ +typedef union _hw_uart_ir +{ + uint8_t U; + struct _hw_uart_ir_bitfields + { + uint8_t TNP : 2; /*!< [1:0] Transmitter narrow pulse */ + uint8_t IREN : 1; /*!< [2] Infrared enable */ + uint8_t RESERVED0 : 5; /*!< [7:3] */ + } B; +} hw_uart_ir_t; + +/*! + * @name Constants and macros for entire UART_IR register + */ +/*@{*/ +#define HW_UART_IR_ADDR(x) ((x) + 0xEU) + +#define HW_UART_IR(x) (*(__IO hw_uart_ir_t *) HW_UART_IR_ADDR(x)) +#define HW_UART_IR_RD(x) (HW_UART_IR(x).U) +#define HW_UART_IR_WR(x, v) (HW_UART_IR(x).U = (v)) +#define HW_UART_IR_SET(x, v) (HW_UART_IR_WR(x, HW_UART_IR_RD(x) | (v))) +#define HW_UART_IR_CLR(x, v) (HW_UART_IR_WR(x, HW_UART_IR_RD(x) & ~(v))) +#define HW_UART_IR_TOG(x, v) (HW_UART_IR_WR(x, HW_UART_IR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_IR bitfields + */ + +/*! + * @name Register UART_IR, field TNP[1:0] (RW) + * + * Enables whether the UART transmits a 1/16, 3/16, 1/32, or 1/4 narrow pulse. + * + * Values: + * - 00 - 3/16. + * - 01 - 1/16. + * - 10 - 1/32. + * - 11 - 1/4. + */ +/*@{*/ +#define BP_UART_IR_TNP (0U) /*!< Bit position for UART_IR_TNP. */ +#define BM_UART_IR_TNP (0x03U) /*!< Bit mask for UART_IR_TNP. */ +#define BS_UART_IR_TNP (2U) /*!< Bit field size in bits for UART_IR_TNP. */ + +/*! @brief Read current value of the UART_IR_TNP field. */ +#define BR_UART_IR_TNP(x) (HW_UART_IR(x).B.TNP) + +/*! @brief Format value for bitfield UART_IR_TNP. */ +#define BF_UART_IR_TNP(v) ((uint8_t)((uint8_t)(v) << BP_UART_IR_TNP) & BM_UART_IR_TNP) + +/*! @brief Set the TNP field to a new value. */ +#define BW_UART_IR_TNP(x, v) (HW_UART_IR_WR(x, (HW_UART_IR_RD(x) & ~BM_UART_IR_TNP) | BF_UART_IR_TNP(v))) +/*@}*/ + +/*! + * @name Register UART_IR, field IREN[2] (RW) + * + * Enables/disables the infrared modulation/demodulation. + * + * Values: + * - 0 - IR disabled. + * - 1 - IR enabled. + */ +/*@{*/ +#define BP_UART_IR_IREN (2U) /*!< Bit position for UART_IR_IREN. */ +#define BM_UART_IR_IREN (0x04U) /*!< Bit mask for UART_IR_IREN. */ +#define BS_UART_IR_IREN (1U) /*!< Bit field size in bits for UART_IR_IREN. */ + +/*! @brief Read current value of the UART_IR_IREN field. */ +#define BR_UART_IR_IREN(x) (BITBAND_ACCESS8(HW_UART_IR_ADDR(x), BP_UART_IR_IREN)) + +/*! @brief Format value for bitfield UART_IR_IREN. */ +#define BF_UART_IR_IREN(v) ((uint8_t)((uint8_t)(v) << BP_UART_IR_IREN) & BM_UART_IR_IREN) + +/*! @brief Set the IREN field to a new value. */ +#define BW_UART_IR_IREN(x, v) (BITBAND_ACCESS8(HW_UART_IR_ADDR(x), BP_UART_IR_IREN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_PFIFO - UART FIFO Parameters + ******************************************************************************/ + +/*! + * @brief HW_UART_PFIFO - UART FIFO Parameters (RW) + * + * Reset value: 0x00U + * + * This register provides the ability for the programmer to turn on and off FIFO + * functionality. It also provides the size of the FIFO that has been + * implemented. This register may be read at any time. This register must be written only + * when C2[RE] and C2[TE] are cleared/not set and when the data buffer/FIFO is + * empty. + */ +typedef union _hw_uart_pfifo +{ + uint8_t U; + struct _hw_uart_pfifo_bitfields + { + uint8_t RXFIFOSIZE : 3; /*!< [2:0] Receive FIFO. Buffer Depth */ + uint8_t RXFE : 1; /*!< [3] Receive FIFO Enable */ + uint8_t TXFIFOSIZE : 3; /*!< [6:4] Transmit FIFO. Buffer Depth */ + uint8_t TXFE : 1; /*!< [7] Transmit FIFO Enable */ + } B; +} hw_uart_pfifo_t; + +/*! + * @name Constants and macros for entire UART_PFIFO register + */ +/*@{*/ +#define HW_UART_PFIFO_ADDR(x) ((x) + 0x10U) + +#define HW_UART_PFIFO(x) (*(__IO hw_uart_pfifo_t *) HW_UART_PFIFO_ADDR(x)) +#define HW_UART_PFIFO_RD(x) (HW_UART_PFIFO(x).U) +#define HW_UART_PFIFO_WR(x, v) (HW_UART_PFIFO(x).U = (v)) +#define HW_UART_PFIFO_SET(x, v) (HW_UART_PFIFO_WR(x, HW_UART_PFIFO_RD(x) | (v))) +#define HW_UART_PFIFO_CLR(x, v) (HW_UART_PFIFO_WR(x, HW_UART_PFIFO_RD(x) & ~(v))) +#define HW_UART_PFIFO_TOG(x, v) (HW_UART_PFIFO_WR(x, HW_UART_PFIFO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_PFIFO bitfields + */ + +/*! + * @name Register UART_PFIFO, field RXFIFOSIZE[2:0] (RO) + * + * The maximum number of receive datawords that can be stored in the receive + * buffer before an overrun occurs. This field is read only. + * + * Values: + * - 000 - Receive FIFO/Buffer depth = 1 dataword. + * - 001 - Receive FIFO/Buffer depth = 4 datawords. + * - 010 - Receive FIFO/Buffer depth = 8 datawords. + * - 011 - Receive FIFO/Buffer depth = 16 datawords. + * - 100 - Receive FIFO/Buffer depth = 32 datawords. + * - 101 - Receive FIFO/Buffer depth = 64 datawords. + * - 110 - Receive FIFO/Buffer depth = 128 datawords. + * - 111 - Reserved. + */ +/*@{*/ +#define BP_UART_PFIFO_RXFIFOSIZE (0U) /*!< Bit position for UART_PFIFO_RXFIFOSIZE. */ +#define BM_UART_PFIFO_RXFIFOSIZE (0x07U) /*!< Bit mask for UART_PFIFO_RXFIFOSIZE. */ +#define BS_UART_PFIFO_RXFIFOSIZE (3U) /*!< Bit field size in bits for UART_PFIFO_RXFIFOSIZE. */ + +/*! @brief Read current value of the UART_PFIFO_RXFIFOSIZE field. */ +#define BR_UART_PFIFO_RXFIFOSIZE(x) (HW_UART_PFIFO(x).B.RXFIFOSIZE) +/*@}*/ + +/*! + * @name Register UART_PFIFO, field RXFE[3] (RW) + * + * When this field is set, the built in FIFO structure for the receive buffer is + * enabled. The size of the FIFO structure is indicated by the RXFIFOSIZE field. + * If this field is not set, the receive buffer operates as a FIFO of depth one + * dataword regardless of the value in RXFIFOSIZE. Both C2[TE] and C2[RE] must be + * cleared prior to changing this field. Additionally, TXFLUSH and RXFLUSH + * commands must be issued immediately after changing this field. + * + * Values: + * - 0 - Receive FIFO is not enabled. Buffer is depth 1. (Legacy support) + * - 1 - Receive FIFO is enabled. Buffer is depth indicted by RXFIFOSIZE. + */ +/*@{*/ +#define BP_UART_PFIFO_RXFE (3U) /*!< Bit position for UART_PFIFO_RXFE. */ +#define BM_UART_PFIFO_RXFE (0x08U) /*!< Bit mask for UART_PFIFO_RXFE. */ +#define BS_UART_PFIFO_RXFE (1U) /*!< Bit field size in bits for UART_PFIFO_RXFE. */ + +/*! @brief Read current value of the UART_PFIFO_RXFE field. */ +#define BR_UART_PFIFO_RXFE(x) (BITBAND_ACCESS8(HW_UART_PFIFO_ADDR(x), BP_UART_PFIFO_RXFE)) + +/*! @brief Format value for bitfield UART_PFIFO_RXFE. */ +#define BF_UART_PFIFO_RXFE(v) ((uint8_t)((uint8_t)(v) << BP_UART_PFIFO_RXFE) & BM_UART_PFIFO_RXFE) + +/*! @brief Set the RXFE field to a new value. */ +#define BW_UART_PFIFO_RXFE(x, v) (BITBAND_ACCESS8(HW_UART_PFIFO_ADDR(x), BP_UART_PFIFO_RXFE) = (v)) +/*@}*/ + +/*! + * @name Register UART_PFIFO, field TXFIFOSIZE[6:4] (RO) + * + * The maximum number of transmit datawords that can be stored in the transmit + * buffer. This field is read only. + * + * Values: + * - 000 - Transmit FIFO/Buffer depth = 1 dataword. + * - 001 - Transmit FIFO/Buffer depth = 4 datawords. + * - 010 - Transmit FIFO/Buffer depth = 8 datawords. + * - 011 - Transmit FIFO/Buffer depth = 16 datawords. + * - 100 - Transmit FIFO/Buffer depth = 32 datawords. + * - 101 - Transmit FIFO/Buffer depth = 64 datawords. + * - 110 - Transmit FIFO/Buffer depth = 128 datawords. + * - 111 - Reserved. + */ +/*@{*/ +#define BP_UART_PFIFO_TXFIFOSIZE (4U) /*!< Bit position for UART_PFIFO_TXFIFOSIZE. */ +#define BM_UART_PFIFO_TXFIFOSIZE (0x70U) /*!< Bit mask for UART_PFIFO_TXFIFOSIZE. */ +#define BS_UART_PFIFO_TXFIFOSIZE (3U) /*!< Bit field size in bits for UART_PFIFO_TXFIFOSIZE. */ + +/*! @brief Read current value of the UART_PFIFO_TXFIFOSIZE field. */ +#define BR_UART_PFIFO_TXFIFOSIZE(x) (HW_UART_PFIFO(x).B.TXFIFOSIZE) +/*@}*/ + +/*! + * @name Register UART_PFIFO, field TXFE[7] (RW) + * + * When this field is set, the built in FIFO structure for the transmit buffer + * is enabled. The size of the FIFO structure is indicated by TXFIFOSIZE. If this + * field is not set, the transmit buffer operates as a FIFO of depth one dataword + * regardless of the value in TXFIFOSIZE. Both C2[TE] and C2[RE] must be cleared + * prior to changing this field. Additionally, TXFLUSH and RXFLUSH commands must + * be issued immediately after changing this field. + * + * Values: + * - 0 - Transmit FIFO is not enabled. Buffer is depth 1. (Legacy support). + * - 1 - Transmit FIFO is enabled. Buffer is depth indicated by TXFIFOSIZE. + */ +/*@{*/ +#define BP_UART_PFIFO_TXFE (7U) /*!< Bit position for UART_PFIFO_TXFE. */ +#define BM_UART_PFIFO_TXFE (0x80U) /*!< Bit mask for UART_PFIFO_TXFE. */ +#define BS_UART_PFIFO_TXFE (1U) /*!< Bit field size in bits for UART_PFIFO_TXFE. */ + +/*! @brief Read current value of the UART_PFIFO_TXFE field. */ +#define BR_UART_PFIFO_TXFE(x) (BITBAND_ACCESS8(HW_UART_PFIFO_ADDR(x), BP_UART_PFIFO_TXFE)) + +/*! @brief Format value for bitfield UART_PFIFO_TXFE. */ +#define BF_UART_PFIFO_TXFE(v) ((uint8_t)((uint8_t)(v) << BP_UART_PFIFO_TXFE) & BM_UART_PFIFO_TXFE) + +/*! @brief Set the TXFE field to a new value. */ +#define BW_UART_PFIFO_TXFE(x, v) (BITBAND_ACCESS8(HW_UART_PFIFO_ADDR(x), BP_UART_PFIFO_TXFE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_CFIFO - UART FIFO Control Register + ******************************************************************************/ + +/*! + * @brief HW_UART_CFIFO - UART FIFO Control Register (RW) + * + * Reset value: 0x00U + * + * This register provides the ability to program various control fields for FIFO + * operation. This register may be read or written at any time. Note that + * writing to TXFLUSH and RXFLUSH may result in data loss and requires careful action + * to prevent unintended/unpredictable behavior. Therefore, it is recommended that + * TE and RE be cleared prior to flushing the corresponding FIFO. + */ +typedef union _hw_uart_cfifo +{ + uint8_t U; + struct _hw_uart_cfifo_bitfields + { + uint8_t RXUFE : 1; /*!< [0] Receive FIFO Underflow Interrupt Enable */ + uint8_t TXOFE : 1; /*!< [1] Transmit FIFO Overflow Interrupt Enable */ + uint8_t RXOFE : 1; /*!< [2] Receive FIFO Overflow Interrupt Enable */ + uint8_t RESERVED0 : 3; /*!< [5:3] */ + uint8_t RXFLUSH : 1; /*!< [6] Receive FIFO/Buffer Flush */ + uint8_t TXFLUSH : 1; /*!< [7] Transmit FIFO/Buffer Flush */ + } B; +} hw_uart_cfifo_t; + +/*! + * @name Constants and macros for entire UART_CFIFO register + */ +/*@{*/ +#define HW_UART_CFIFO_ADDR(x) ((x) + 0x11U) + +#define HW_UART_CFIFO(x) (*(__IO hw_uart_cfifo_t *) HW_UART_CFIFO_ADDR(x)) +#define HW_UART_CFIFO_RD(x) (HW_UART_CFIFO(x).U) +#define HW_UART_CFIFO_WR(x, v) (HW_UART_CFIFO(x).U = (v)) +#define HW_UART_CFIFO_SET(x, v) (HW_UART_CFIFO_WR(x, HW_UART_CFIFO_RD(x) | (v))) +#define HW_UART_CFIFO_CLR(x, v) (HW_UART_CFIFO_WR(x, HW_UART_CFIFO_RD(x) & ~(v))) +#define HW_UART_CFIFO_TOG(x, v) (HW_UART_CFIFO_WR(x, HW_UART_CFIFO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_CFIFO bitfields + */ + +/*! + * @name Register UART_CFIFO, field RXUFE[0] (RW) + * + * When this field is set, the RXUF flag generates an interrupt to the host. + * + * Values: + * - 0 - RXUF flag does not generate an interrupt to the host. + * - 1 - RXUF flag generates an interrupt to the host. + */ +/*@{*/ +#define BP_UART_CFIFO_RXUFE (0U) /*!< Bit position for UART_CFIFO_RXUFE. */ +#define BM_UART_CFIFO_RXUFE (0x01U) /*!< Bit mask for UART_CFIFO_RXUFE. */ +#define BS_UART_CFIFO_RXUFE (1U) /*!< Bit field size in bits for UART_CFIFO_RXUFE. */ + +/*! @brief Read current value of the UART_CFIFO_RXUFE field. */ +#define BR_UART_CFIFO_RXUFE(x) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_RXUFE)) + +/*! @brief Format value for bitfield UART_CFIFO_RXUFE. */ +#define BF_UART_CFIFO_RXUFE(v) ((uint8_t)((uint8_t)(v) << BP_UART_CFIFO_RXUFE) & BM_UART_CFIFO_RXUFE) + +/*! @brief Set the RXUFE field to a new value. */ +#define BW_UART_CFIFO_RXUFE(x, v) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_RXUFE) = (v)) +/*@}*/ + +/*! + * @name Register UART_CFIFO, field TXOFE[1] (RW) + * + * When this field is set, the TXOF flag generates an interrupt to the host. + * + * Values: + * - 0 - TXOF flag does not generate an interrupt to the host. + * - 1 - TXOF flag generates an interrupt to the host. + */ +/*@{*/ +#define BP_UART_CFIFO_TXOFE (1U) /*!< Bit position for UART_CFIFO_TXOFE. */ +#define BM_UART_CFIFO_TXOFE (0x02U) /*!< Bit mask for UART_CFIFO_TXOFE. */ +#define BS_UART_CFIFO_TXOFE (1U) /*!< Bit field size in bits for UART_CFIFO_TXOFE. */ + +/*! @brief Read current value of the UART_CFIFO_TXOFE field. */ +#define BR_UART_CFIFO_TXOFE(x) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_TXOFE)) + +/*! @brief Format value for bitfield UART_CFIFO_TXOFE. */ +#define BF_UART_CFIFO_TXOFE(v) ((uint8_t)((uint8_t)(v) << BP_UART_CFIFO_TXOFE) & BM_UART_CFIFO_TXOFE) + +/*! @brief Set the TXOFE field to a new value. */ +#define BW_UART_CFIFO_TXOFE(x, v) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_TXOFE) = (v)) +/*@}*/ + +/*! + * @name Register UART_CFIFO, field RXOFE[2] (RW) + * + * When this field is set, the RXOF flag generates an interrupt to the host. + * + * Values: + * - 0 - RXOF flag does not generate an interrupt to the host. + * - 1 - RXOF flag generates an interrupt to the host. + */ +/*@{*/ +#define BP_UART_CFIFO_RXOFE (2U) /*!< Bit position for UART_CFIFO_RXOFE. */ +#define BM_UART_CFIFO_RXOFE (0x04U) /*!< Bit mask for UART_CFIFO_RXOFE. */ +#define BS_UART_CFIFO_RXOFE (1U) /*!< Bit field size in bits for UART_CFIFO_RXOFE. */ + +/*! @brief Read current value of the UART_CFIFO_RXOFE field. */ +#define BR_UART_CFIFO_RXOFE(x) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_RXOFE)) + +/*! @brief Format value for bitfield UART_CFIFO_RXOFE. */ +#define BF_UART_CFIFO_RXOFE(v) ((uint8_t)((uint8_t)(v) << BP_UART_CFIFO_RXOFE) & BM_UART_CFIFO_RXOFE) + +/*! @brief Set the RXOFE field to a new value. */ +#define BW_UART_CFIFO_RXOFE(x, v) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_RXOFE) = (v)) +/*@}*/ + +/*! + * @name Register UART_CFIFO, field RXFLUSH[6] (WORZ) + * + * Writing to this field causes all data that is stored in the receive + * FIFO/buffer to be flushed. This does not affect data that is in the receive shift + * register. + * + * Values: + * - 0 - No flush operation occurs. + * - 1 - All data in the receive FIFO/buffer is cleared out. + */ +/*@{*/ +#define BP_UART_CFIFO_RXFLUSH (6U) /*!< Bit position for UART_CFIFO_RXFLUSH. */ +#define BM_UART_CFIFO_RXFLUSH (0x40U) /*!< Bit mask for UART_CFIFO_RXFLUSH. */ +#define BS_UART_CFIFO_RXFLUSH (1U) /*!< Bit field size in bits for UART_CFIFO_RXFLUSH. */ + +/*! @brief Format value for bitfield UART_CFIFO_RXFLUSH. */ +#define BF_UART_CFIFO_RXFLUSH(v) ((uint8_t)((uint8_t)(v) << BP_UART_CFIFO_RXFLUSH) & BM_UART_CFIFO_RXFLUSH) + +/*! @brief Set the RXFLUSH field to a new value. */ +#define BW_UART_CFIFO_RXFLUSH(x, v) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_RXFLUSH) = (v)) +/*@}*/ + +/*! + * @name Register UART_CFIFO, field TXFLUSH[7] (WORZ) + * + * Writing to this field causes all data that is stored in the transmit + * FIFO/buffer to be flushed. This does not affect data that is in the transmit shift + * register. + * + * Values: + * - 0 - No flush operation occurs. + * - 1 - All data in the transmit FIFO/Buffer is cleared out. + */ +/*@{*/ +#define BP_UART_CFIFO_TXFLUSH (7U) /*!< Bit position for UART_CFIFO_TXFLUSH. */ +#define BM_UART_CFIFO_TXFLUSH (0x80U) /*!< Bit mask for UART_CFIFO_TXFLUSH. */ +#define BS_UART_CFIFO_TXFLUSH (1U) /*!< Bit field size in bits for UART_CFIFO_TXFLUSH. */ + +/*! @brief Format value for bitfield UART_CFIFO_TXFLUSH. */ +#define BF_UART_CFIFO_TXFLUSH(v) ((uint8_t)((uint8_t)(v) << BP_UART_CFIFO_TXFLUSH) & BM_UART_CFIFO_TXFLUSH) + +/*! @brief Set the TXFLUSH field to a new value. */ +#define BW_UART_CFIFO_TXFLUSH(x, v) (BITBAND_ACCESS8(HW_UART_CFIFO_ADDR(x), BP_UART_CFIFO_TXFLUSH) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_SFIFO - UART FIFO Status Register + ******************************************************************************/ + +/*! + * @brief HW_UART_SFIFO - UART FIFO Status Register (RW) + * + * Reset value: 0xC0U + * + * This register provides status information regarding the transmit and receiver + * buffers/FIFOs, including interrupt information. This register may be written + * to or read at any time. + */ +typedef union _hw_uart_sfifo +{ + uint8_t U; + struct _hw_uart_sfifo_bitfields + { + uint8_t RXUF : 1; /*!< [0] Receiver Buffer Underflow Flag */ + uint8_t TXOF : 1; /*!< [1] Transmitter Buffer Overflow Flag */ + uint8_t RXOF : 1; /*!< [2] Receiver Buffer Overflow Flag */ + uint8_t RESERVED0 : 3; /*!< [5:3] */ + uint8_t RXEMPT : 1; /*!< [6] Receive Buffer/FIFO Empty */ + uint8_t TXEMPT : 1; /*!< [7] Transmit Buffer/FIFO Empty */ + } B; +} hw_uart_sfifo_t; + +/*! + * @name Constants and macros for entire UART_SFIFO register + */ +/*@{*/ +#define HW_UART_SFIFO_ADDR(x) ((x) + 0x12U) + +#define HW_UART_SFIFO(x) (*(__IO hw_uart_sfifo_t *) HW_UART_SFIFO_ADDR(x)) +#define HW_UART_SFIFO_RD(x) (HW_UART_SFIFO(x).U) +#define HW_UART_SFIFO_WR(x, v) (HW_UART_SFIFO(x).U = (v)) +#define HW_UART_SFIFO_SET(x, v) (HW_UART_SFIFO_WR(x, HW_UART_SFIFO_RD(x) | (v))) +#define HW_UART_SFIFO_CLR(x, v) (HW_UART_SFIFO_WR(x, HW_UART_SFIFO_RD(x) & ~(v))) +#define HW_UART_SFIFO_TOG(x, v) (HW_UART_SFIFO_WR(x, HW_UART_SFIFO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_SFIFO bitfields + */ + +/*! + * @name Register UART_SFIFO, field RXUF[0] (W1C) + * + * Indicates that more data has been read from the receive buffer than was + * present. This field will assert regardless of the value of CFIFO[RXUFE]. However, + * an interrupt will be issued to the host only if CFIFO[RXUFE] is set. This flag + * is cleared by writing a 1. + * + * Values: + * - 0 - No receive buffer underflow has occurred since the last time the flag + * was cleared. + * - 1 - At least one receive buffer underflow has occurred since the last time + * the flag was cleared. + */ +/*@{*/ +#define BP_UART_SFIFO_RXUF (0U) /*!< Bit position for UART_SFIFO_RXUF. */ +#define BM_UART_SFIFO_RXUF (0x01U) /*!< Bit mask for UART_SFIFO_RXUF. */ +#define BS_UART_SFIFO_RXUF (1U) /*!< Bit field size in bits for UART_SFIFO_RXUF. */ + +/*! @brief Read current value of the UART_SFIFO_RXUF field. */ +#define BR_UART_SFIFO_RXUF(x) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_RXUF)) + +/*! @brief Format value for bitfield UART_SFIFO_RXUF. */ +#define BF_UART_SFIFO_RXUF(v) ((uint8_t)((uint8_t)(v) << BP_UART_SFIFO_RXUF) & BM_UART_SFIFO_RXUF) + +/*! @brief Set the RXUF field to a new value. */ +#define BW_UART_SFIFO_RXUF(x, v) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_RXUF) = (v)) +/*@}*/ + +/*! + * @name Register UART_SFIFO, field TXOF[1] (W1C) + * + * Indicates that more data has been written to the transmit buffer than it can + * hold. This field will assert regardless of the value of CFIFO[TXOFE]. However, + * an interrupt will be issued to the host only if CFIFO[TXOFE] is set. This + * flag is cleared by writing a 1. + * + * Values: + * - 0 - No transmit buffer overflow has occurred since the last time the flag + * was cleared. + * - 1 - At least one transmit buffer overflow has occurred since the last time + * the flag was cleared. + */ +/*@{*/ +#define BP_UART_SFIFO_TXOF (1U) /*!< Bit position for UART_SFIFO_TXOF. */ +#define BM_UART_SFIFO_TXOF (0x02U) /*!< Bit mask for UART_SFIFO_TXOF. */ +#define BS_UART_SFIFO_TXOF (1U) /*!< Bit field size in bits for UART_SFIFO_TXOF. */ + +/*! @brief Read current value of the UART_SFIFO_TXOF field. */ +#define BR_UART_SFIFO_TXOF(x) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_TXOF)) + +/*! @brief Format value for bitfield UART_SFIFO_TXOF. */ +#define BF_UART_SFIFO_TXOF(v) ((uint8_t)((uint8_t)(v) << BP_UART_SFIFO_TXOF) & BM_UART_SFIFO_TXOF) + +/*! @brief Set the TXOF field to a new value. */ +#define BW_UART_SFIFO_TXOF(x, v) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_TXOF) = (v)) +/*@}*/ + +/*! + * @name Register UART_SFIFO, field RXOF[2] (W1C) + * + * Indicates that more data has been written to the receive buffer than it can + * hold. This field will assert regardless of the value of CFIFO[RXOFE]. However, + * an interrupt will be issued to the host only if CFIFO[RXOFE] is set. This flag + * is cleared by writing a 1. + * + * Values: + * - 0 - No receive buffer overflow has occurred since the last time the flag + * was cleared. + * - 1 - At least one receive buffer overflow has occurred since the last time + * the flag was cleared. + */ +/*@{*/ +#define BP_UART_SFIFO_RXOF (2U) /*!< Bit position for UART_SFIFO_RXOF. */ +#define BM_UART_SFIFO_RXOF (0x04U) /*!< Bit mask for UART_SFIFO_RXOF. */ +#define BS_UART_SFIFO_RXOF (1U) /*!< Bit field size in bits for UART_SFIFO_RXOF. */ + +/*! @brief Read current value of the UART_SFIFO_RXOF field. */ +#define BR_UART_SFIFO_RXOF(x) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_RXOF)) + +/*! @brief Format value for bitfield UART_SFIFO_RXOF. */ +#define BF_UART_SFIFO_RXOF(v) ((uint8_t)((uint8_t)(v) << BP_UART_SFIFO_RXOF) & BM_UART_SFIFO_RXOF) + +/*! @brief Set the RXOF field to a new value. */ +#define BW_UART_SFIFO_RXOF(x, v) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_RXOF) = (v)) +/*@}*/ + +/*! + * @name Register UART_SFIFO, field RXEMPT[6] (RO) + * + * Asserts when there is no data in the receive FIFO/Buffer. This field does not + * take into account data that is in the receive shift register. + * + * Values: + * - 0 - Receive buffer is not empty. + * - 1 - Receive buffer is empty. + */ +/*@{*/ +#define BP_UART_SFIFO_RXEMPT (6U) /*!< Bit position for UART_SFIFO_RXEMPT. */ +#define BM_UART_SFIFO_RXEMPT (0x40U) /*!< Bit mask for UART_SFIFO_RXEMPT. */ +#define BS_UART_SFIFO_RXEMPT (1U) /*!< Bit field size in bits for UART_SFIFO_RXEMPT. */ + +/*! @brief Read current value of the UART_SFIFO_RXEMPT field. */ +#define BR_UART_SFIFO_RXEMPT(x) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_RXEMPT)) +/*@}*/ + +/*! + * @name Register UART_SFIFO, field TXEMPT[7] (RO) + * + * Asserts when there is no data in the Transmit FIFO/buffer. This field does + * not take into account data that is in the transmit shift register. + * + * Values: + * - 0 - Transmit buffer is not empty. + * - 1 - Transmit buffer is empty. + */ +/*@{*/ +#define BP_UART_SFIFO_TXEMPT (7U) /*!< Bit position for UART_SFIFO_TXEMPT. */ +#define BM_UART_SFIFO_TXEMPT (0x80U) /*!< Bit mask for UART_SFIFO_TXEMPT. */ +#define BS_UART_SFIFO_TXEMPT (1U) /*!< Bit field size in bits for UART_SFIFO_TXEMPT. */ + +/*! @brief Read current value of the UART_SFIFO_TXEMPT field. */ +#define BR_UART_SFIFO_TXEMPT(x) (BITBAND_ACCESS8(HW_UART_SFIFO_ADDR(x), BP_UART_SFIFO_TXEMPT)) +/*@}*/ + +/******************************************************************************* + * HW_UART_TWFIFO - UART FIFO Transmit Watermark + ******************************************************************************/ + +/*! + * @brief HW_UART_TWFIFO - UART FIFO Transmit Watermark (RW) + * + * Reset value: 0x00U + * + * This register provides the ability to set a programmable threshold for + * notification of needing additional transmit data. This register may be read at any + * time but must be written only when C2[TE] is not set. Changing the value of the + * watermark will not clear the S1[TDRE] flag. + */ +typedef union _hw_uart_twfifo +{ + uint8_t U; + struct _hw_uart_twfifo_bitfields + { + uint8_t TXWATER : 8; /*!< [7:0] Transmit Watermark */ + } B; +} hw_uart_twfifo_t; + +/*! + * @name Constants and macros for entire UART_TWFIFO register + */ +/*@{*/ +#define HW_UART_TWFIFO_ADDR(x) ((x) + 0x13U) + +#define HW_UART_TWFIFO(x) (*(__IO hw_uart_twfifo_t *) HW_UART_TWFIFO_ADDR(x)) +#define HW_UART_TWFIFO_RD(x) (HW_UART_TWFIFO(x).U) +#define HW_UART_TWFIFO_WR(x, v) (HW_UART_TWFIFO(x).U = (v)) +#define HW_UART_TWFIFO_SET(x, v) (HW_UART_TWFIFO_WR(x, HW_UART_TWFIFO_RD(x) | (v))) +#define HW_UART_TWFIFO_CLR(x, v) (HW_UART_TWFIFO_WR(x, HW_UART_TWFIFO_RD(x) & ~(v))) +#define HW_UART_TWFIFO_TOG(x, v) (HW_UART_TWFIFO_WR(x, HW_UART_TWFIFO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_TWFIFO bitfields + */ + +/*! + * @name Register UART_TWFIFO, field TXWATER[7:0] (RW) + * + * When the number of datawords in the transmit FIFO/buffer is equal to or less + * than the value in this register field, an interrupt via S1[TDRE] or a DMA + * request via C5[TDMAS] is generated as determined by C5[TDMAS] and C2[TIE]. For + * proper operation, the value in TXWATER must be set to be less than the size of + * the transmit buffer/FIFO size as indicated by PFIFO[TXFIFOSIZE] and PFIFO[TXFE]. + */ +/*@{*/ +#define BP_UART_TWFIFO_TXWATER (0U) /*!< Bit position for UART_TWFIFO_TXWATER. */ +#define BM_UART_TWFIFO_TXWATER (0xFFU) /*!< Bit mask for UART_TWFIFO_TXWATER. */ +#define BS_UART_TWFIFO_TXWATER (8U) /*!< Bit field size in bits for UART_TWFIFO_TXWATER. */ + +/*! @brief Read current value of the UART_TWFIFO_TXWATER field. */ +#define BR_UART_TWFIFO_TXWATER(x) (HW_UART_TWFIFO(x).U) + +/*! @brief Format value for bitfield UART_TWFIFO_TXWATER. */ +#define BF_UART_TWFIFO_TXWATER(v) ((uint8_t)((uint8_t)(v) << BP_UART_TWFIFO_TXWATER) & BM_UART_TWFIFO_TXWATER) + +/*! @brief Set the TXWATER field to a new value. */ +#define BW_UART_TWFIFO_TXWATER(x, v) (HW_UART_TWFIFO_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_TCFIFO - UART FIFO Transmit Count + ******************************************************************************/ + +/*! + * @brief HW_UART_TCFIFO - UART FIFO Transmit Count (RO) + * + * Reset value: 0x00U + * + * This is a read only register that indicates how many datawords are currently + * in the transmit buffer/FIFO. It may be read at any time. + */ +typedef union _hw_uart_tcfifo +{ + uint8_t U; + struct _hw_uart_tcfifo_bitfields + { + uint8_t TXCOUNT : 8; /*!< [7:0] Transmit Counter */ + } B; +} hw_uart_tcfifo_t; + +/*! + * @name Constants and macros for entire UART_TCFIFO register + */ +/*@{*/ +#define HW_UART_TCFIFO_ADDR(x) ((x) + 0x14U) + +#define HW_UART_TCFIFO(x) (*(__I hw_uart_tcfifo_t *) HW_UART_TCFIFO_ADDR(x)) +#define HW_UART_TCFIFO_RD(x) (HW_UART_TCFIFO(x).U) +/*@}*/ + +/* + * Constants & macros for individual UART_TCFIFO bitfields + */ + +/*! + * @name Register UART_TCFIFO, field TXCOUNT[7:0] (RO) + * + * The value in this register indicates the number of datawords that are in the + * transmit FIFO/buffer. If a dataword is being transmitted, that is, in the + * transmit shift register, it is not included in the count. This value may be used + * in conjunction with PFIFO[TXFIFOSIZE] to calculate how much room is left in the + * transmit FIFO/buffer. + */ +/*@{*/ +#define BP_UART_TCFIFO_TXCOUNT (0U) /*!< Bit position for UART_TCFIFO_TXCOUNT. */ +#define BM_UART_TCFIFO_TXCOUNT (0xFFU) /*!< Bit mask for UART_TCFIFO_TXCOUNT. */ +#define BS_UART_TCFIFO_TXCOUNT (8U) /*!< Bit field size in bits for UART_TCFIFO_TXCOUNT. */ + +/*! @brief Read current value of the UART_TCFIFO_TXCOUNT field. */ +#define BR_UART_TCFIFO_TXCOUNT(x) (HW_UART_TCFIFO(x).U) +/*@}*/ + +/******************************************************************************* + * HW_UART_RWFIFO - UART FIFO Receive Watermark + ******************************************************************************/ + +/*! + * @brief HW_UART_RWFIFO - UART FIFO Receive Watermark (RW) + * + * Reset value: 0x01U + * + * This register provides the ability to set a programmable threshold for + * notification of the need to remove data from the receiver FIFO/buffer. This register + * may be read at any time but must be written only when C2[RE] is not asserted. + * Changing the value in this register will not clear S1[RDRF]. + */ +typedef union _hw_uart_rwfifo +{ + uint8_t U; + struct _hw_uart_rwfifo_bitfields + { + uint8_t RXWATER : 8; /*!< [7:0] Receive Watermark */ + } B; +} hw_uart_rwfifo_t; + +/*! + * @name Constants and macros for entire UART_RWFIFO register + */ +/*@{*/ +#define HW_UART_RWFIFO_ADDR(x) ((x) + 0x15U) + +#define HW_UART_RWFIFO(x) (*(__IO hw_uart_rwfifo_t *) HW_UART_RWFIFO_ADDR(x)) +#define HW_UART_RWFIFO_RD(x) (HW_UART_RWFIFO(x).U) +#define HW_UART_RWFIFO_WR(x, v) (HW_UART_RWFIFO(x).U = (v)) +#define HW_UART_RWFIFO_SET(x, v) (HW_UART_RWFIFO_WR(x, HW_UART_RWFIFO_RD(x) | (v))) +#define HW_UART_RWFIFO_CLR(x, v) (HW_UART_RWFIFO_WR(x, HW_UART_RWFIFO_RD(x) & ~(v))) +#define HW_UART_RWFIFO_TOG(x, v) (HW_UART_RWFIFO_WR(x, HW_UART_RWFIFO_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_RWFIFO bitfields + */ + +/*! + * @name Register UART_RWFIFO, field RXWATER[7:0] (RW) + * + * When the number of datawords in the receive FIFO/buffer is equal to or + * greater than the value in this register field, an interrupt via S1[RDRF] or a DMA + * request via C5[RDMAS] is generated as determined by C5[RDMAS] and C2[RIE]. For + * proper operation, the value in RXWATER must be set to be less than the receive + * FIFO/buffer size as indicated by PFIFO[RXFIFOSIZE] and PFIFO[RXFE] and must be + * greater than 0. + */ +/*@{*/ +#define BP_UART_RWFIFO_RXWATER (0U) /*!< Bit position for UART_RWFIFO_RXWATER. */ +#define BM_UART_RWFIFO_RXWATER (0xFFU) /*!< Bit mask for UART_RWFIFO_RXWATER. */ +#define BS_UART_RWFIFO_RXWATER (8U) /*!< Bit field size in bits for UART_RWFIFO_RXWATER. */ + +/*! @brief Read current value of the UART_RWFIFO_RXWATER field. */ +#define BR_UART_RWFIFO_RXWATER(x) (HW_UART_RWFIFO(x).U) + +/*! @brief Format value for bitfield UART_RWFIFO_RXWATER. */ +#define BF_UART_RWFIFO_RXWATER(v) ((uint8_t)((uint8_t)(v) << BP_UART_RWFIFO_RXWATER) & BM_UART_RWFIFO_RXWATER) + +/*! @brief Set the RXWATER field to a new value. */ +#define BW_UART_RWFIFO_RXWATER(x, v) (HW_UART_RWFIFO_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_RCFIFO - UART FIFO Receive Count + ******************************************************************************/ + +/*! + * @brief HW_UART_RCFIFO - UART FIFO Receive Count (RO) + * + * Reset value: 0x00U + * + * This is a read only register that indicates how many datawords are currently + * in the receive FIFO/buffer. It may be read at any time. + */ +typedef union _hw_uart_rcfifo +{ + uint8_t U; + struct _hw_uart_rcfifo_bitfields + { + uint8_t RXCOUNT : 8; /*!< [7:0] Receive Counter */ + } B; +} hw_uart_rcfifo_t; + +/*! + * @name Constants and macros for entire UART_RCFIFO register + */ +/*@{*/ +#define HW_UART_RCFIFO_ADDR(x) ((x) + 0x16U) + +#define HW_UART_RCFIFO(x) (*(__I hw_uart_rcfifo_t *) HW_UART_RCFIFO_ADDR(x)) +#define HW_UART_RCFIFO_RD(x) (HW_UART_RCFIFO(x).U) +/*@}*/ + +/* + * Constants & macros for individual UART_RCFIFO bitfields + */ + +/*! + * @name Register UART_RCFIFO, field RXCOUNT[7:0] (RO) + * + * The value in this register indicates the number of datawords that are in the + * receive FIFO/buffer. If a dataword is being received, that is, in the receive + * shift register, it is not included in the count. This value may be used in + * conjunction with PFIFO[RXFIFOSIZE] to calculate how much room is left in the + * receive FIFO/buffer. + */ +/*@{*/ +#define BP_UART_RCFIFO_RXCOUNT (0U) /*!< Bit position for UART_RCFIFO_RXCOUNT. */ +#define BM_UART_RCFIFO_RXCOUNT (0xFFU) /*!< Bit mask for UART_RCFIFO_RXCOUNT. */ +#define BS_UART_RCFIFO_RXCOUNT (8U) /*!< Bit field size in bits for UART_RCFIFO_RXCOUNT. */ + +/*! @brief Read current value of the UART_RCFIFO_RXCOUNT field. */ +#define BR_UART_RCFIFO_RXCOUNT(x) (HW_UART_RCFIFO(x).U) +/*@}*/ + +/******************************************************************************* + * HW_UART_C7816 - UART 7816 Control Register + ******************************************************************************/ + +/*! + * @brief HW_UART_C7816 - UART 7816 Control Register (RW) + * + * Reset value: 0x00U + * + * The C7816 register is the primary control register for ISO-7816 specific + * functionality. This register is specific to 7816 functionality and the values in + * this register have no effect on UART operation and should be ignored if + * ISO_7816E is not set/enabled. This register may be read at any time but values must + * be changed only when ISO_7816E is not set. + */ +typedef union _hw_uart_c7816 +{ + uint8_t U; + struct _hw_uart_c7816_bitfields + { + uint8_t ISO_7816E : 1; /*!< [0] ISO-7816 Functionality Enabled */ + uint8_t TTYPE : 1; /*!< [1] Transfer Type */ + uint8_t INIT : 1; /*!< [2] Detect Initial Character */ + uint8_t ANACK : 1; /*!< [3] Generate NACK on Error */ + uint8_t ONACK : 1; /*!< [4] Generate NACK on Overflow */ + uint8_t RESERVED0 : 3; /*!< [7:5] */ + } B; +} hw_uart_c7816_t; + +/*! + * @name Constants and macros for entire UART_C7816 register + */ +/*@{*/ +#define HW_UART_C7816_ADDR(x) ((x) + 0x18U) + +#define HW_UART_C7816(x) (*(__IO hw_uart_c7816_t *) HW_UART_C7816_ADDR(x)) +#define HW_UART_C7816_RD(x) (HW_UART_C7816(x).U) +#define HW_UART_C7816_WR(x, v) (HW_UART_C7816(x).U = (v)) +#define HW_UART_C7816_SET(x, v) (HW_UART_C7816_WR(x, HW_UART_C7816_RD(x) | (v))) +#define HW_UART_C7816_CLR(x, v) (HW_UART_C7816_WR(x, HW_UART_C7816_RD(x) & ~(v))) +#define HW_UART_C7816_TOG(x, v) (HW_UART_C7816_WR(x, HW_UART_C7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_C7816 bitfields + */ + +/*! + * @name Register UART_C7816, field ISO_7816E[0] (RW) + * + * Indicates that the UART is operating according to the ISO-7816 protocol. This + * field must be modified only when no transmit or receive is occurring. If this + * field is changed during a data transfer, the data being transmitted or + * received may be transferred incorrectly. + * + * Values: + * - 0 - ISO-7816 functionality is turned off/not enabled. + * - 1 - ISO-7816 functionality is turned on/enabled. + */ +/*@{*/ +#define BP_UART_C7816_ISO_7816E (0U) /*!< Bit position for UART_C7816_ISO_7816E. */ +#define BM_UART_C7816_ISO_7816E (0x01U) /*!< Bit mask for UART_C7816_ISO_7816E. */ +#define BS_UART_C7816_ISO_7816E (1U) /*!< Bit field size in bits for UART_C7816_ISO_7816E. */ + +/*! @brief Read current value of the UART_C7816_ISO_7816E field. */ +#define BR_UART_C7816_ISO_7816E(x) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ISO_7816E)) + +/*! @brief Format value for bitfield UART_C7816_ISO_7816E. */ +#define BF_UART_C7816_ISO_7816E(v) ((uint8_t)((uint8_t)(v) << BP_UART_C7816_ISO_7816E) & BM_UART_C7816_ISO_7816E) + +/*! @brief Set the ISO_7816E field to a new value. */ +#define BW_UART_C7816_ISO_7816E(x, v) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ISO_7816E) = (v)) +/*@}*/ + +/*! + * @name Register UART_C7816, field TTYPE[1] (RW) + * + * Indicates the transfer protocol being used. See ISO-7816 / smartcard support + * for more details. + * + * Values: + * - 0 - T = 0 per the ISO-7816 specification. + * - 1 - T = 1 per the ISO-7816 specification. + */ +/*@{*/ +#define BP_UART_C7816_TTYPE (1U) /*!< Bit position for UART_C7816_TTYPE. */ +#define BM_UART_C7816_TTYPE (0x02U) /*!< Bit mask for UART_C7816_TTYPE. */ +#define BS_UART_C7816_TTYPE (1U) /*!< Bit field size in bits for UART_C7816_TTYPE. */ + +/*! @brief Read current value of the UART_C7816_TTYPE field. */ +#define BR_UART_C7816_TTYPE(x) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_TTYPE)) + +/*! @brief Format value for bitfield UART_C7816_TTYPE. */ +#define BF_UART_C7816_TTYPE(v) ((uint8_t)((uint8_t)(v) << BP_UART_C7816_TTYPE) & BM_UART_C7816_TTYPE) + +/*! @brief Set the TTYPE field to a new value. */ +#define BW_UART_C7816_TTYPE(x, v) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_TTYPE) = (v)) +/*@}*/ + +/*! + * @name Register UART_C7816, field INIT[2] (RW) + * + * When this field is set, all received characters are searched for a valid + * initial character. If an invalid initial character is identified, and ANACK is + * set, a NACK is sent. All received data is discarded and error flags blocked + * (S1[NF], S1[OR], S1[FE], S1[PF], IS7816[WT], IS7816[CWT], IS7816[BWT], IS7816[ADT], + * IS7816[GTV]) until a valid initial character is detected. Upon detecting a + * valid initial character, the configuration values S2[MSBF], C3[TXINV], and + * S2[RXINV] are automatically updated to reflect the initial character that was + * received. The actual INIT data value is not stored in the receive buffer. + * Additionally, upon detection of a valid initial character, IS7816[INITD] is set and an + * interrupt issued as programmed by IE7816[INITDE]. When a valid initial + * character is detected, INIT is automatically cleared. This Initial Character Detect + * feature is supported only in T = 0 protocol mode. + * + * Values: + * - 0 - Normal operating mode. Receiver does not seek to identify initial + * character. + * - 1 - Receiver searches for initial character. + */ +/*@{*/ +#define BP_UART_C7816_INIT (2U) /*!< Bit position for UART_C7816_INIT. */ +#define BM_UART_C7816_INIT (0x04U) /*!< Bit mask for UART_C7816_INIT. */ +#define BS_UART_C7816_INIT (1U) /*!< Bit field size in bits for UART_C7816_INIT. */ + +/*! @brief Read current value of the UART_C7816_INIT field. */ +#define BR_UART_C7816_INIT(x) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_INIT)) + +/*! @brief Format value for bitfield UART_C7816_INIT. */ +#define BF_UART_C7816_INIT(v) ((uint8_t)((uint8_t)(v) << BP_UART_C7816_INIT) & BM_UART_C7816_INIT) + +/*! @brief Set the INIT field to a new value. */ +#define BW_UART_C7816_INIT(x, v) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_INIT) = (v)) +/*@}*/ + +/*! + * @name Register UART_C7816, field ANACK[3] (RW) + * + * When this field is set, the receiver automatically generates a NACK response + * if a parity error occurs or if INIT is set and an invalid initial character is + * detected. A NACK is generated only if TTYPE = 0. If ANACK is set, the UART + * attempts to retransmit the data indefinitely. To stop retransmission attempts, + * clear C2[TE] or ISO_7816E and do not set until S1[TC] sets C2[TE] again. + * + * Values: + * - 0 - No NACK is automatically generated. + * - 1 - A NACK is automatically generated if a parity error is detected or if + * an invalid initial character is detected. + */ +/*@{*/ +#define BP_UART_C7816_ANACK (3U) /*!< Bit position for UART_C7816_ANACK. */ +#define BM_UART_C7816_ANACK (0x08U) /*!< Bit mask for UART_C7816_ANACK. */ +#define BS_UART_C7816_ANACK (1U) /*!< Bit field size in bits for UART_C7816_ANACK. */ + +/*! @brief Read current value of the UART_C7816_ANACK field. */ +#define BR_UART_C7816_ANACK(x) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ANACK)) + +/*! @brief Format value for bitfield UART_C7816_ANACK. */ +#define BF_UART_C7816_ANACK(v) ((uint8_t)((uint8_t)(v) << BP_UART_C7816_ANACK) & BM_UART_C7816_ANACK) + +/*! @brief Set the ANACK field to a new value. */ +#define BW_UART_C7816_ANACK(x, v) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ANACK) = (v)) +/*@}*/ + +/*! + * @name Register UART_C7816, field ONACK[4] (RW) + * + * When this field is set, the receiver automatically generates a NACK response + * if a receive buffer overrun occurs, as indicated by S1[OR]. In many systems, + * this results in the transmitter resending the packet that overflowed until the + * retransmit threshold for that transmitter is reached. A NACK is generated only + * if TTYPE=0. This field operates independently of ANACK. See . Overrun NACK + * considerations + * + * Values: + * - 0 - The received data does not generate a NACK when the receipt of the data + * results in an overflow event. + * - 1 - If the receiver buffer overflows, a NACK is automatically sent on a + * received character. + */ +/*@{*/ +#define BP_UART_C7816_ONACK (4U) /*!< Bit position for UART_C7816_ONACK. */ +#define BM_UART_C7816_ONACK (0x10U) /*!< Bit mask for UART_C7816_ONACK. */ +#define BS_UART_C7816_ONACK (1U) /*!< Bit field size in bits for UART_C7816_ONACK. */ + +/*! @brief Read current value of the UART_C7816_ONACK field. */ +#define BR_UART_C7816_ONACK(x) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ONACK)) + +/*! @brief Format value for bitfield UART_C7816_ONACK. */ +#define BF_UART_C7816_ONACK(v) ((uint8_t)((uint8_t)(v) << BP_UART_C7816_ONACK) & BM_UART_C7816_ONACK) + +/*! @brief Set the ONACK field to a new value. */ +#define BW_UART_C7816_ONACK(x, v) (BITBAND_ACCESS8(HW_UART_C7816_ADDR(x), BP_UART_C7816_ONACK) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_IE7816 - UART 7816 Interrupt Enable Register + ******************************************************************************/ + +/*! + * @brief HW_UART_IE7816 - UART 7816 Interrupt Enable Register (RW) + * + * Reset value: 0x00U + * + * The IE7816 register controls which flags result in an interrupt being issued. + * This register is specific to 7816 functionality, the corresponding flags that + * drive the interrupts are not asserted when 7816E is not set/enabled. However, + * these flags may remain set if they are asserted while 7816E was set and not + * subsequently cleared. This register may be read or written to at any time. + */ +typedef union _hw_uart_ie7816 +{ + uint8_t U; + struct _hw_uart_ie7816_bitfields + { + uint8_t RXTE : 1; /*!< [0] Receive Threshold Exceeded Interrupt + * Enable */ + uint8_t TXTE : 1; /*!< [1] Transmit Threshold Exceeded Interrupt + * Enable */ + uint8_t GTVE : 1; /*!< [2] Guard Timer Violated Interrupt Enable */ + uint8_t ADTE : 1; /*!< [3] ATR Duration Timer Interrupt Enable */ + uint8_t INITDE : 1; /*!< [4] Initial Character Detected Interrupt + * Enable */ + uint8_t BWTE : 1; /*!< [5] Block Wait Timer Interrupt Enable */ + uint8_t CWTE : 1; /*!< [6] Character Wait Timer Interrupt Enable */ + uint8_t WTE : 1; /*!< [7] Wait Timer Interrupt Enable */ + } B; +} hw_uart_ie7816_t; + +/*! + * @name Constants and macros for entire UART_IE7816 register + */ +/*@{*/ +#define HW_UART_IE7816_ADDR(x) ((x) + 0x19U) + +#define HW_UART_IE7816(x) (*(__IO hw_uart_ie7816_t *) HW_UART_IE7816_ADDR(x)) +#define HW_UART_IE7816_RD(x) (HW_UART_IE7816(x).U) +#define HW_UART_IE7816_WR(x, v) (HW_UART_IE7816(x).U = (v)) +#define HW_UART_IE7816_SET(x, v) (HW_UART_IE7816_WR(x, HW_UART_IE7816_RD(x) | (v))) +#define HW_UART_IE7816_CLR(x, v) (HW_UART_IE7816_WR(x, HW_UART_IE7816_RD(x) & ~(v))) +#define HW_UART_IE7816_TOG(x, v) (HW_UART_IE7816_WR(x, HW_UART_IE7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_IE7816 bitfields + */ + +/*! + * @name Register UART_IE7816, field RXTE[0] (RW) + * + * Values: + * - 0 - The assertion of IS7816[RXT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[RXT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_RXTE (0U) /*!< Bit position for UART_IE7816_RXTE. */ +#define BM_UART_IE7816_RXTE (0x01U) /*!< Bit mask for UART_IE7816_RXTE. */ +#define BS_UART_IE7816_RXTE (1U) /*!< Bit field size in bits for UART_IE7816_RXTE. */ + +/*! @brief Read current value of the UART_IE7816_RXTE field. */ +#define BR_UART_IE7816_RXTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_RXTE)) + +/*! @brief Format value for bitfield UART_IE7816_RXTE. */ +#define BF_UART_IE7816_RXTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_RXTE) & BM_UART_IE7816_RXTE) + +/*! @brief Set the RXTE field to a new value. */ +#define BW_UART_IE7816_RXTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_RXTE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field TXTE[1] (RW) + * + * Values: + * - 0 - The assertion of IS7816[TXT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[TXT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_TXTE (1U) /*!< Bit position for UART_IE7816_TXTE. */ +#define BM_UART_IE7816_TXTE (0x02U) /*!< Bit mask for UART_IE7816_TXTE. */ +#define BS_UART_IE7816_TXTE (1U) /*!< Bit field size in bits for UART_IE7816_TXTE. */ + +/*! @brief Read current value of the UART_IE7816_TXTE field. */ +#define BR_UART_IE7816_TXTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_TXTE)) + +/*! @brief Format value for bitfield UART_IE7816_TXTE. */ +#define BF_UART_IE7816_TXTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_TXTE) & BM_UART_IE7816_TXTE) + +/*! @brief Set the TXTE field to a new value. */ +#define BW_UART_IE7816_TXTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_TXTE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field GTVE[2] (RW) + * + * Values: + * - 0 - The assertion of IS7816[GTV] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[GTV] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_GTVE (2U) /*!< Bit position for UART_IE7816_GTVE. */ +#define BM_UART_IE7816_GTVE (0x04U) /*!< Bit mask for UART_IE7816_GTVE. */ +#define BS_UART_IE7816_GTVE (1U) /*!< Bit field size in bits for UART_IE7816_GTVE. */ + +/*! @brief Read current value of the UART_IE7816_GTVE field. */ +#define BR_UART_IE7816_GTVE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_GTVE)) + +/*! @brief Format value for bitfield UART_IE7816_GTVE. */ +#define BF_UART_IE7816_GTVE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_GTVE) & BM_UART_IE7816_GTVE) + +/*! @brief Set the GTVE field to a new value. */ +#define BW_UART_IE7816_GTVE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_GTVE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field ADTE[3] (RW) + * + * Values: + * - 0 - The assertion of IS7816[ADT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[ADT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_ADTE (3U) /*!< Bit position for UART_IE7816_ADTE. */ +#define BM_UART_IE7816_ADTE (0x08U) /*!< Bit mask for UART_IE7816_ADTE. */ +#define BS_UART_IE7816_ADTE (1U) /*!< Bit field size in bits for UART_IE7816_ADTE. */ + +/*! @brief Read current value of the UART_IE7816_ADTE field. */ +#define BR_UART_IE7816_ADTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_ADTE)) + +/*! @brief Format value for bitfield UART_IE7816_ADTE. */ +#define BF_UART_IE7816_ADTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_ADTE) & BM_UART_IE7816_ADTE) + +/*! @brief Set the ADTE field to a new value. */ +#define BW_UART_IE7816_ADTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_ADTE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field INITDE[4] (RW) + * + * Values: + * - 0 - The assertion of IS7816[INITD] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[INITD] results in the generation of an + * interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_INITDE (4U) /*!< Bit position for UART_IE7816_INITDE. */ +#define BM_UART_IE7816_INITDE (0x10U) /*!< Bit mask for UART_IE7816_INITDE. */ +#define BS_UART_IE7816_INITDE (1U) /*!< Bit field size in bits for UART_IE7816_INITDE. */ + +/*! @brief Read current value of the UART_IE7816_INITDE field. */ +#define BR_UART_IE7816_INITDE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_INITDE)) + +/*! @brief Format value for bitfield UART_IE7816_INITDE. */ +#define BF_UART_IE7816_INITDE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_INITDE) & BM_UART_IE7816_INITDE) + +/*! @brief Set the INITDE field to a new value. */ +#define BW_UART_IE7816_INITDE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_INITDE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field BWTE[5] (RW) + * + * Values: + * - 0 - The assertion of IS7816[BWT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[BWT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_BWTE (5U) /*!< Bit position for UART_IE7816_BWTE. */ +#define BM_UART_IE7816_BWTE (0x20U) /*!< Bit mask for UART_IE7816_BWTE. */ +#define BS_UART_IE7816_BWTE (1U) /*!< Bit field size in bits for UART_IE7816_BWTE. */ + +/*! @brief Read current value of the UART_IE7816_BWTE field. */ +#define BR_UART_IE7816_BWTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_BWTE)) + +/*! @brief Format value for bitfield UART_IE7816_BWTE. */ +#define BF_UART_IE7816_BWTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_BWTE) & BM_UART_IE7816_BWTE) + +/*! @brief Set the BWTE field to a new value. */ +#define BW_UART_IE7816_BWTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_BWTE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field CWTE[6] (RW) + * + * Values: + * - 0 - The assertion of IS7816[CWT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[CWT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_CWTE (6U) /*!< Bit position for UART_IE7816_CWTE. */ +#define BM_UART_IE7816_CWTE (0x40U) /*!< Bit mask for UART_IE7816_CWTE. */ +#define BS_UART_IE7816_CWTE (1U) /*!< Bit field size in bits for UART_IE7816_CWTE. */ + +/*! @brief Read current value of the UART_IE7816_CWTE field. */ +#define BR_UART_IE7816_CWTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_CWTE)) + +/*! @brief Format value for bitfield UART_IE7816_CWTE. */ +#define BF_UART_IE7816_CWTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_CWTE) & BM_UART_IE7816_CWTE) + +/*! @brief Set the CWTE field to a new value. */ +#define BW_UART_IE7816_CWTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_CWTE) = (v)) +/*@}*/ + +/*! + * @name Register UART_IE7816, field WTE[7] (RW) + * + * Values: + * - 0 - The assertion of IS7816[WT] does not result in the generation of an + * interrupt. + * - 1 - The assertion of IS7816[WT] results in the generation of an interrupt. + */ +/*@{*/ +#define BP_UART_IE7816_WTE (7U) /*!< Bit position for UART_IE7816_WTE. */ +#define BM_UART_IE7816_WTE (0x80U) /*!< Bit mask for UART_IE7816_WTE. */ +#define BS_UART_IE7816_WTE (1U) /*!< Bit field size in bits for UART_IE7816_WTE. */ + +/*! @brief Read current value of the UART_IE7816_WTE field. */ +#define BR_UART_IE7816_WTE(x) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_WTE)) + +/*! @brief Format value for bitfield UART_IE7816_WTE. */ +#define BF_UART_IE7816_WTE(v) ((uint8_t)((uint8_t)(v) << BP_UART_IE7816_WTE) & BM_UART_IE7816_WTE) + +/*! @brief Set the WTE field to a new value. */ +#define BW_UART_IE7816_WTE(x, v) (BITBAND_ACCESS8(HW_UART_IE7816_ADDR(x), BP_UART_IE7816_WTE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_IS7816 - UART 7816 Interrupt Status Register + ******************************************************************************/ + +/*! + * @brief HW_UART_IS7816 - UART 7816 Interrupt Status Register (W1C) + * + * Reset value: 0x00U + * + * The IS7816 register provides a mechanism to read and clear the interrupt + * flags. All flags/interrupts are cleared by writing a 1 to the field location. + * Writing a 0 has no effect. All bits are "sticky", meaning they indicate that only + * the flag condition that occurred since the last time the bit was cleared, not + * that the condition currently exists. The status flags are set regardless of + * whether the corresponding field in the IE7816 is set or cleared. The IE7816 + * controls only if an interrupt is issued to the host processor. This register is + * specific to 7816 functionality and the values in this register have no affect on + * UART operation and should be ignored if 7816E is not set/enabled. This + * register may be read or written at anytime. + */ +typedef union _hw_uart_is7816 +{ + uint8_t U; + struct _hw_uart_is7816_bitfields + { + uint8_t RXT : 1; /*!< [0] Receive Threshold Exceeded Interrupt */ + uint8_t TXT : 1; /*!< [1] Transmit Threshold Exceeded Interrupt */ + uint8_t GTV : 1; /*!< [2] Guard Timer Violated Interrupt */ + uint8_t ADT : 1; /*!< [3] ATR Duration Time Interrupt */ + uint8_t INITD : 1; /*!< [4] Initial Character Detected Interrupt */ + uint8_t BWT : 1; /*!< [5] Block Wait Timer Interrupt */ + uint8_t CWT : 1; /*!< [6] Character Wait Timer Interrupt */ + uint8_t WT : 1; /*!< [7] Wait Timer Interrupt */ + } B; +} hw_uart_is7816_t; + +/*! + * @name Constants and macros for entire UART_IS7816 register + */ +/*@{*/ +#define HW_UART_IS7816_ADDR(x) ((x) + 0x1AU) + +#define HW_UART_IS7816(x) (*(__IO hw_uart_is7816_t *) HW_UART_IS7816_ADDR(x)) +#define HW_UART_IS7816_RD(x) (HW_UART_IS7816(x).U) +#define HW_UART_IS7816_WR(x, v) (HW_UART_IS7816(x).U = (v)) +#define HW_UART_IS7816_SET(x, v) (HW_UART_IS7816_WR(x, HW_UART_IS7816_RD(x) | (v))) +#define HW_UART_IS7816_CLR(x, v) (HW_UART_IS7816_WR(x, HW_UART_IS7816_RD(x) & ~(v))) +#define HW_UART_IS7816_TOG(x, v) (HW_UART_IS7816_WR(x, HW_UART_IS7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_IS7816 bitfields + */ + +/*! + * @name Register UART_IS7816, field RXT[0] (W1C) + * + * Indicates that there are more than ET7816[RXTHRESHOLD] consecutive NACKS + * generated in response to parity errors on received data. This flag requires ANACK + * to be set. Additionally, this flag asserts only when C7816[TTYPE] = 0. + * Clearing this field also resets the counter keeping track of consecutive NACKS. The + * UART will continue to attempt to receive data regardless of whether this flag + * is set. If 7816E is cleared/disabled, RE is cleared/disabled, C7816[TTYPE] = 1, + * or packet is received without needing to issue a NACK, the internal NACK + * detection counter is cleared and the count restarts from zero on the next + * transmitted NACK. This interrupt is cleared by writing 1. + * + * Values: + * - 0 - The number of consecutive NACKS generated as a result of parity errors + * and buffer overruns is less than or equal to the value in + * ET7816[RXTHRESHOLD]. + * - 1 - The number of consecutive NACKS generated as a result of parity errors + * and buffer overruns is greater than the value in ET7816[RXTHRESHOLD]. + */ +/*@{*/ +#define BP_UART_IS7816_RXT (0U) /*!< Bit position for UART_IS7816_RXT. */ +#define BM_UART_IS7816_RXT (0x01U) /*!< Bit mask for UART_IS7816_RXT. */ +#define BS_UART_IS7816_RXT (1U) /*!< Bit field size in bits for UART_IS7816_RXT. */ + +/*! @brief Read current value of the UART_IS7816_RXT field. */ +#define BR_UART_IS7816_RXT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_RXT)) + +/*! @brief Format value for bitfield UART_IS7816_RXT. */ +#define BF_UART_IS7816_RXT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_RXT) & BM_UART_IS7816_RXT) + +/*! @brief Set the RXT field to a new value. */ +#define BW_UART_IS7816_RXT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_RXT) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field TXT[1] (W1C) + * + * Indicates that the transmit NACK threshold has been exceeded as indicated by + * ET7816[TXTHRESHOLD]. Regardless of whether this flag is set, the UART + * continues to retransmit indefinitely. This flag asserts only when C7816[TTYPE] = 0. If + * 7816E is cleared/disabled, ANACK is cleared/disabled, C2[TE] is + * cleared/disabled, C7816[TTYPE] = 1, or packet is transferred without receiving a NACK, the + * internal NACK detection counter is cleared and the count restarts from zero on + * the next received NACK. This interrupt is cleared by writing 1. + * + * Values: + * - 0 - The number of retries and corresponding NACKS does not exceed the value + * in ET7816[TXTHRESHOLD]. + * - 1 - The number of retries and corresponding NACKS exceeds the value in + * ET7816[TXTHRESHOLD]. + */ +/*@{*/ +#define BP_UART_IS7816_TXT (1U) /*!< Bit position for UART_IS7816_TXT. */ +#define BM_UART_IS7816_TXT (0x02U) /*!< Bit mask for UART_IS7816_TXT. */ +#define BS_UART_IS7816_TXT (1U) /*!< Bit field size in bits for UART_IS7816_TXT. */ + +/*! @brief Read current value of the UART_IS7816_TXT field. */ +#define BR_UART_IS7816_TXT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_TXT)) + +/*! @brief Format value for bitfield UART_IS7816_TXT. */ +#define BF_UART_IS7816_TXT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_TXT) & BM_UART_IS7816_TXT) + +/*! @brief Set the TXT field to a new value. */ +#define BW_UART_IS7816_TXT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_TXT) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field GTV[2] (W1C) + * + * Indicates that one or more of the character guard time, block guard time, or + * guard time are violated. This interrupt is cleared by writing 1. + * + * Values: + * - 0 - A guard time (GT, CGT, or BGT) has not been violated. + * - 1 - A guard time (GT, CGT, or BGT) has been violated. + */ +/*@{*/ +#define BP_UART_IS7816_GTV (2U) /*!< Bit position for UART_IS7816_GTV. */ +#define BM_UART_IS7816_GTV (0x04U) /*!< Bit mask for UART_IS7816_GTV. */ +#define BS_UART_IS7816_GTV (1U) /*!< Bit field size in bits for UART_IS7816_GTV. */ + +/*! @brief Read current value of the UART_IS7816_GTV field. */ +#define BR_UART_IS7816_GTV(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_GTV)) + +/*! @brief Format value for bitfield UART_IS7816_GTV. */ +#define BF_UART_IS7816_GTV(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_GTV) & BM_UART_IS7816_GTV) + +/*! @brief Set the GTV field to a new value. */ +#define BW_UART_IS7816_GTV(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_GTV) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field ADT[3] (W1C) + * + * Indicates that the ATR duration time, the time between the leading edge of + * the TS character being received and the leading edge of the next response + * character, has exceeded the programmed value. This flag asserts only when + * C7816[TTYPE] = 0. This interrupt is cleared by writing 1. + * + * Values: + * - 0 - ATR Duration time (ADT) has not been violated. + * - 1 - ATR Duration time (ADT) has been violated. + */ +/*@{*/ +#define BP_UART_IS7816_ADT (3U) /*!< Bit position for UART_IS7816_ADT. */ +#define BM_UART_IS7816_ADT (0x08U) /*!< Bit mask for UART_IS7816_ADT. */ +#define BS_UART_IS7816_ADT (1U) /*!< Bit field size in bits for UART_IS7816_ADT. */ + +/*! @brief Read current value of the UART_IS7816_ADT field. */ +#define BR_UART_IS7816_ADT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_ADT)) + +/*! @brief Format value for bitfield UART_IS7816_ADT. */ +#define BF_UART_IS7816_ADT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_ADT) & BM_UART_IS7816_ADT) + +/*! @brief Set the ADT field to a new value. */ +#define BW_UART_IS7816_ADT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_ADT) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field INITD[4] (W1C) + * + * Indicates that a valid initial character is received. This interrupt is + * cleared by writing 1. + * + * Values: + * - 0 - A valid initial character has not been received. + * - 1 - A valid initial character has been received. + */ +/*@{*/ +#define BP_UART_IS7816_INITD (4U) /*!< Bit position for UART_IS7816_INITD. */ +#define BM_UART_IS7816_INITD (0x10U) /*!< Bit mask for UART_IS7816_INITD. */ +#define BS_UART_IS7816_INITD (1U) /*!< Bit field size in bits for UART_IS7816_INITD. */ + +/*! @brief Read current value of the UART_IS7816_INITD field. */ +#define BR_UART_IS7816_INITD(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_INITD)) + +/*! @brief Format value for bitfield UART_IS7816_INITD. */ +#define BF_UART_IS7816_INITD(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_INITD) & BM_UART_IS7816_INITD) + +/*! @brief Set the INITD field to a new value. */ +#define BW_UART_IS7816_INITD(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_INITD) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field BWT[5] (W1C) + * + * Indicates that the block wait time, the time between the leading edge of + * first received character of a block and the leading edge of the last character the + * previously transmitted block, has exceeded the programmed value. This flag + * asserts only when C7816[TTYPE] = 1.This interrupt is cleared by writing 1. + * + * Values: + * - 0 - Block wait time (BWT) has not been violated. + * - 1 - Block wait time (BWT) has been violated. + */ +/*@{*/ +#define BP_UART_IS7816_BWT (5U) /*!< Bit position for UART_IS7816_BWT. */ +#define BM_UART_IS7816_BWT (0x20U) /*!< Bit mask for UART_IS7816_BWT. */ +#define BS_UART_IS7816_BWT (1U) /*!< Bit field size in bits for UART_IS7816_BWT. */ + +/*! @brief Read current value of the UART_IS7816_BWT field. */ +#define BR_UART_IS7816_BWT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_BWT)) + +/*! @brief Format value for bitfield UART_IS7816_BWT. */ +#define BF_UART_IS7816_BWT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_BWT) & BM_UART_IS7816_BWT) + +/*! @brief Set the BWT field to a new value. */ +#define BW_UART_IS7816_BWT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_BWT) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field CWT[6] (W1C) + * + * Indicates that the character wait time, the time between the leading edges of + * two consecutive characters in a block, has exceeded the programmed value. + * This flag asserts only when C7816[TTYPE] = 1. This interrupt is cleared by + * writing 1. + * + * Values: + * - 0 - Character wait time (CWT) has not been violated. + * - 1 - Character wait time (CWT) has been violated. + */ +/*@{*/ +#define BP_UART_IS7816_CWT (6U) /*!< Bit position for UART_IS7816_CWT. */ +#define BM_UART_IS7816_CWT (0x40U) /*!< Bit mask for UART_IS7816_CWT. */ +#define BS_UART_IS7816_CWT (1U) /*!< Bit field size in bits for UART_IS7816_CWT. */ + +/*! @brief Read current value of the UART_IS7816_CWT field. */ +#define BR_UART_IS7816_CWT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_CWT)) + +/*! @brief Format value for bitfield UART_IS7816_CWT. */ +#define BF_UART_IS7816_CWT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_CWT) & BM_UART_IS7816_CWT) + +/*! @brief Set the CWT field to a new value. */ +#define BW_UART_IS7816_CWT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_CWT) = (v)) +/*@}*/ + +/*! + * @name Register UART_IS7816, field WT[7] (W1C) + * + * Indicates that the wait time, the time between the leading edge of a + * character being transmitted and the leading edge of the next response character, has + * exceeded the programmed value. This flag asserts only when C7816[TTYPE] = 0. + * This interrupt is cleared by writing 1. + * + * Values: + * - 0 - Wait time (WT) has not been violated. + * - 1 - Wait time (WT) has been violated. + */ +/*@{*/ +#define BP_UART_IS7816_WT (7U) /*!< Bit position for UART_IS7816_WT. */ +#define BM_UART_IS7816_WT (0x80U) /*!< Bit mask for UART_IS7816_WT. */ +#define BS_UART_IS7816_WT (1U) /*!< Bit field size in bits for UART_IS7816_WT. */ + +/*! @brief Read current value of the UART_IS7816_WT field. */ +#define BR_UART_IS7816_WT(x) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_WT)) + +/*! @brief Format value for bitfield UART_IS7816_WT. */ +#define BF_UART_IS7816_WT(v) ((uint8_t)((uint8_t)(v) << BP_UART_IS7816_WT) & BM_UART_IS7816_WT) + +/*! @brief Set the WT field to a new value. */ +#define BW_UART_IS7816_WT(x, v) (BITBAND_ACCESS8(HW_UART_IS7816_ADDR(x), BP_UART_IS7816_WT) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_WP7816 - UART 7816 Wait Parameter Register + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816 - UART 7816 Wait Parameter Register (RW) + * + * Reset value: 0x00U + * + * The WP7816 register contains the WTX variable used in the generation of the + * block wait timer. This register may be read at any time. This register must be + * written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816 +{ + uint8_t U; + struct _hw_uart_wp7816_bitfields + { + uint8_t WTX : 8; /*!< [7:0] Wait Time Multiplier (C7816[TTYPE] = 1) */ + } B; +} hw_uart_wp7816_t; + +/*! + * @name Constants and macros for entire UART_WP7816 register + */ +/*@{*/ +#define HW_UART_WP7816_ADDR(x) ((x) + 0x1BU) + +#define HW_UART_WP7816(x) (*(__IO hw_uart_wp7816_t *) HW_UART_WP7816_ADDR(x)) +#define HW_UART_WP7816_RD(x) (HW_UART_WP7816(x).U) +#define HW_UART_WP7816_WR(x, v) (HW_UART_WP7816(x).U = (v)) +#define HW_UART_WP7816_SET(x, v) (HW_UART_WP7816_WR(x, HW_UART_WP7816_RD(x) | (v))) +#define HW_UART_WP7816_CLR(x, v) (HW_UART_WP7816_WR(x, HW_UART_WP7816_RD(x) & ~(v))) +#define HW_UART_WP7816_TOG(x, v) (HW_UART_WP7816_WR(x, HW_UART_WP7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816 bitfields + */ + +/*! + * @name Register UART_WP7816, field WTX[7:0] (RW) + * + * Used to calculate the value used for the BWT counter. It represents a value + * between 0 and 255. This value is used only when C7816[TTYPE] = 1. See Wait time + * and guard time parameters. + */ +/*@{*/ +#define BP_UART_WP7816_WTX (0U) /*!< Bit position for UART_WP7816_WTX. */ +#define BM_UART_WP7816_WTX (0xFFU) /*!< Bit mask for UART_WP7816_WTX. */ +#define BS_UART_WP7816_WTX (8U) /*!< Bit field size in bits for UART_WP7816_WTX. */ + +/*! @brief Read current value of the UART_WP7816_WTX field. */ +#define BR_UART_WP7816_WTX(x) (HW_UART_WP7816(x).U) + +/*! @brief Format value for bitfield UART_WP7816_WTX. */ +#define BF_UART_WP7816_WTX(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816_WTX) & BM_UART_WP7816_WTX) + +/*! @brief Set the WTX field to a new value. */ +#define BW_UART_WP7816_WTX(x, v) (HW_UART_WP7816_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_WN7816 - UART 7816 Wait N Register + ******************************************************************************/ + +/*! + * @brief HW_UART_WN7816 - UART 7816 Wait N Register (RW) + * + * Reset value: 0x00U + * + * The WN7816 register contains a parameter that is used in the calculation of + * the guard time counter. This register may be read at any time. This register + * must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wn7816 +{ + uint8_t U; + struct _hw_uart_wn7816_bitfields + { + uint8_t GTN : 8; /*!< [7:0] Guard Band N */ + } B; +} hw_uart_wn7816_t; + +/*! + * @name Constants and macros for entire UART_WN7816 register + */ +/*@{*/ +#define HW_UART_WN7816_ADDR(x) ((x) + 0x1CU) + +#define HW_UART_WN7816(x) (*(__IO hw_uart_wn7816_t *) HW_UART_WN7816_ADDR(x)) +#define HW_UART_WN7816_RD(x) (HW_UART_WN7816(x).U) +#define HW_UART_WN7816_WR(x, v) (HW_UART_WN7816(x).U = (v)) +#define HW_UART_WN7816_SET(x, v) (HW_UART_WN7816_WR(x, HW_UART_WN7816_RD(x) | (v))) +#define HW_UART_WN7816_CLR(x, v) (HW_UART_WN7816_WR(x, HW_UART_WN7816_RD(x) & ~(v))) +#define HW_UART_WN7816_TOG(x, v) (HW_UART_WN7816_WR(x, HW_UART_WN7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WN7816 bitfields + */ + +/*! + * @name Register UART_WN7816, field GTN[7:0] (RW) + * + * Defines a parameter used in the calculation of GT, CGT, and BGT counters. The + * value represents an integer number between 0 and 255. See Wait time and guard + * time parameters . + */ +/*@{*/ +#define BP_UART_WN7816_GTN (0U) /*!< Bit position for UART_WN7816_GTN. */ +#define BM_UART_WN7816_GTN (0xFFU) /*!< Bit mask for UART_WN7816_GTN. */ +#define BS_UART_WN7816_GTN (8U) /*!< Bit field size in bits for UART_WN7816_GTN. */ + +/*! @brief Read current value of the UART_WN7816_GTN field. */ +#define BR_UART_WN7816_GTN(x) (HW_UART_WN7816(x).U) + +/*! @brief Format value for bitfield UART_WN7816_GTN. */ +#define BF_UART_WN7816_GTN(v) ((uint8_t)((uint8_t)(v) << BP_UART_WN7816_GTN) & BM_UART_WN7816_GTN) + +/*! @brief Set the GTN field to a new value. */ +#define BW_UART_WN7816_GTN(x, v) (HW_UART_WN7816_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_WF7816 - UART 7816 Wait FD Register + ******************************************************************************/ + +/*! + * @brief HW_UART_WF7816 - UART 7816 Wait FD Register (RW) + * + * Reset value: 0x01U + * + * The WF7816 contains parameters that are used in the generation of various + * counters including GT, CGT, BGT, WT, and BWT. This register may be read at any + * time. This register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wf7816 +{ + uint8_t U; + struct _hw_uart_wf7816_bitfields + { + uint8_t GTFD : 8; /*!< [7:0] FD Multiplier */ + } B; +} hw_uart_wf7816_t; + +/*! + * @name Constants and macros for entire UART_WF7816 register + */ +/*@{*/ +#define HW_UART_WF7816_ADDR(x) ((x) + 0x1DU) + +#define HW_UART_WF7816(x) (*(__IO hw_uart_wf7816_t *) HW_UART_WF7816_ADDR(x)) +#define HW_UART_WF7816_RD(x) (HW_UART_WF7816(x).U) +#define HW_UART_WF7816_WR(x, v) (HW_UART_WF7816(x).U = (v)) +#define HW_UART_WF7816_SET(x, v) (HW_UART_WF7816_WR(x, HW_UART_WF7816_RD(x) | (v))) +#define HW_UART_WF7816_CLR(x, v) (HW_UART_WF7816_WR(x, HW_UART_WF7816_RD(x) & ~(v))) +#define HW_UART_WF7816_TOG(x, v) (HW_UART_WF7816_WR(x, HW_UART_WF7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WF7816 bitfields + */ + +/*! + * @name Register UART_WF7816, field GTFD[7:0] (RW) + * + * Used as another multiplier in the calculation of BWT. This value represents a + * number between 1 and 255. The value of 0 is invalid. This value is not used + * in baud rate generation. See Wait time and guard time parameters and Baud rate + * generation . + */ +/*@{*/ +#define BP_UART_WF7816_GTFD (0U) /*!< Bit position for UART_WF7816_GTFD. */ +#define BM_UART_WF7816_GTFD (0xFFU) /*!< Bit mask for UART_WF7816_GTFD. */ +#define BS_UART_WF7816_GTFD (8U) /*!< Bit field size in bits for UART_WF7816_GTFD. */ + +/*! @brief Read current value of the UART_WF7816_GTFD field. */ +#define BR_UART_WF7816_GTFD(x) (HW_UART_WF7816(x).U) + +/*! @brief Format value for bitfield UART_WF7816_GTFD. */ +#define BF_UART_WF7816_GTFD(v) ((uint8_t)((uint8_t)(v) << BP_UART_WF7816_GTFD) & BM_UART_WF7816_GTFD) + +/*! @brief Set the GTFD field to a new value. */ +#define BW_UART_WF7816_GTFD(x, v) (HW_UART_WF7816_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_ET7816 - UART 7816 Error Threshold Register + ******************************************************************************/ + +/*! + * @brief HW_UART_ET7816 - UART 7816 Error Threshold Register (RW) + * + * Reset value: 0x00U + * + * The ET7816 register contains fields that determine the number of NACKs that + * must be received or transmitted before the host processor is notified. This + * register may be read at anytime. This register must be written to only when + * C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_et7816 +{ + uint8_t U; + struct _hw_uart_et7816_bitfields + { + uint8_t RXTHRESHOLD : 4; /*!< [3:0] Receive NACK Threshold */ + uint8_t TXTHRESHOLD : 4; /*!< [7:4] Transmit NACK Threshold */ + } B; +} hw_uart_et7816_t; + +/*! + * @name Constants and macros for entire UART_ET7816 register + */ +/*@{*/ +#define HW_UART_ET7816_ADDR(x) ((x) + 0x1EU) + +#define HW_UART_ET7816(x) (*(__IO hw_uart_et7816_t *) HW_UART_ET7816_ADDR(x)) +#define HW_UART_ET7816_RD(x) (HW_UART_ET7816(x).U) +#define HW_UART_ET7816_WR(x, v) (HW_UART_ET7816(x).U = (v)) +#define HW_UART_ET7816_SET(x, v) (HW_UART_ET7816_WR(x, HW_UART_ET7816_RD(x) | (v))) +#define HW_UART_ET7816_CLR(x, v) (HW_UART_ET7816_WR(x, HW_UART_ET7816_RD(x) & ~(v))) +#define HW_UART_ET7816_TOG(x, v) (HW_UART_ET7816_WR(x, HW_UART_ET7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_ET7816 bitfields + */ + +/*! + * @name Register UART_ET7816, field RXTHRESHOLD[3:0] (RW) + * + * The value written to this field indicates the maximum number of consecutive + * NACKs generated as a result of a parity error or receiver buffer overruns + * before the host processor is notified. After the counter exceeds that value in the + * field, the IS7816[RXT] is asserted. This field is meaningful only when + * C7816[TTYPE] = 0. The value read from this field represents the number of consecutive + * NACKs that have been transmitted since the last successful reception. This + * counter saturates at 4'hF and does not wrap around. Regardless of the number of + * NACKs sent, the UART continues to receive valid packets indefinitely. For + * additional information, see IS7816[RXT] field description. + */ +/*@{*/ +#define BP_UART_ET7816_RXTHRESHOLD (0U) /*!< Bit position for UART_ET7816_RXTHRESHOLD. */ +#define BM_UART_ET7816_RXTHRESHOLD (0x0FU) /*!< Bit mask for UART_ET7816_RXTHRESHOLD. */ +#define BS_UART_ET7816_RXTHRESHOLD (4U) /*!< Bit field size in bits for UART_ET7816_RXTHRESHOLD. */ + +/*! @brief Read current value of the UART_ET7816_RXTHRESHOLD field. */ +#define BR_UART_ET7816_RXTHRESHOLD(x) (HW_UART_ET7816(x).B.RXTHRESHOLD) + +/*! @brief Format value for bitfield UART_ET7816_RXTHRESHOLD. */ +#define BF_UART_ET7816_RXTHRESHOLD(v) ((uint8_t)((uint8_t)(v) << BP_UART_ET7816_RXTHRESHOLD) & BM_UART_ET7816_RXTHRESHOLD) + +/*! @brief Set the RXTHRESHOLD field to a new value. */ +#define BW_UART_ET7816_RXTHRESHOLD(x, v) (HW_UART_ET7816_WR(x, (HW_UART_ET7816_RD(x) & ~BM_UART_ET7816_RXTHRESHOLD) | BF_UART_ET7816_RXTHRESHOLD(v))) +/*@}*/ + +/*! + * @name Register UART_ET7816, field TXTHRESHOLD[7:4] (RW) + * + * The value written to this field indicates the maximum number of failed + * attempts (NACKs) a transmitted character can have before the host processor is + * notified. This field is meaningful only when C7816[TTYPE] = 0 and C7816[ANACK] = 1. + * The value read from this field represents the number of consecutive NACKs + * that have been received since the last successful transmission. This counter + * saturates at 4'hF and does not wrap around. Regardless of how many NACKs that are + * received, the UART continues to retransmit indefinitely. This flag only + * asserts when C7816[TTYPE] = 0. For additional information see the IS7816[TXT] field + * description. + * + * Values: + * - 0 - TXT asserts on the first NACK that is received. + * - 1 - TXT asserts on the second NACK that is received. + */ +/*@{*/ +#define BP_UART_ET7816_TXTHRESHOLD (4U) /*!< Bit position for UART_ET7816_TXTHRESHOLD. */ +#define BM_UART_ET7816_TXTHRESHOLD (0xF0U) /*!< Bit mask for UART_ET7816_TXTHRESHOLD. */ +#define BS_UART_ET7816_TXTHRESHOLD (4U) /*!< Bit field size in bits for UART_ET7816_TXTHRESHOLD. */ + +/*! @brief Read current value of the UART_ET7816_TXTHRESHOLD field. */ +#define BR_UART_ET7816_TXTHRESHOLD(x) (HW_UART_ET7816(x).B.TXTHRESHOLD) + +/*! @brief Format value for bitfield UART_ET7816_TXTHRESHOLD. */ +#define BF_UART_ET7816_TXTHRESHOLD(v) ((uint8_t)((uint8_t)(v) << BP_UART_ET7816_TXTHRESHOLD) & BM_UART_ET7816_TXTHRESHOLD) + +/*! @brief Set the TXTHRESHOLD field to a new value. */ +#define BW_UART_ET7816_TXTHRESHOLD(x, v) (HW_UART_ET7816_WR(x, (HW_UART_ET7816_RD(x) & ~BM_UART_ET7816_TXTHRESHOLD) | BF_UART_ET7816_TXTHRESHOLD(v))) +/*@}*/ + +/******************************************************************************* + * HW_UART_TL7816 - UART 7816 Transmit Length Register + ******************************************************************************/ + +/*! + * @brief HW_UART_TL7816 - UART 7816 Transmit Length Register (RW) + * + * Reset value: 0x00U + * + * The TL7816 register is used to indicate the number of characters contained in + * the block being transmitted. This register is used only when C7816[TTYPE] = + * 1. This register may be read at anytime. This register must be written only + * when C2[TE] is not enabled. + */ +typedef union _hw_uart_tl7816 +{ + uint8_t U; + struct _hw_uart_tl7816_bitfields + { + uint8_t TLEN : 8; /*!< [7:0] Transmit Length */ + } B; +} hw_uart_tl7816_t; + +/*! + * @name Constants and macros for entire UART_TL7816 register + */ +/*@{*/ +#define HW_UART_TL7816_ADDR(x) ((x) + 0x1FU) + +#define HW_UART_TL7816(x) (*(__IO hw_uart_tl7816_t *) HW_UART_TL7816_ADDR(x)) +#define HW_UART_TL7816_RD(x) (HW_UART_TL7816(x).U) +#define HW_UART_TL7816_WR(x, v) (HW_UART_TL7816(x).U = (v)) +#define HW_UART_TL7816_SET(x, v) (HW_UART_TL7816_WR(x, HW_UART_TL7816_RD(x) | (v))) +#define HW_UART_TL7816_CLR(x, v) (HW_UART_TL7816_WR(x, HW_UART_TL7816_RD(x) & ~(v))) +#define HW_UART_TL7816_TOG(x, v) (HW_UART_TL7816_WR(x, HW_UART_TL7816_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_TL7816 bitfields + */ + +/*! + * @name Register UART_TL7816, field TLEN[7:0] (RW) + * + * This value plus four indicates the number of characters contained in the + * block being transmitted. This register is automatically decremented by 1 for each + * character in the information field portion of the block. Additionally, this + * register is automatically decremented by 1 for the first character of a CRC in + * the epilogue field. Therefore, this register must be programmed with the number + * of bytes in the data packet if an LRC is being transmitted, and the number of + * bytes + 1 if a CRC is being transmitted. This register is not decremented for + * characters that are assumed to be part of the Prologue field, that is, the + * first three characters transmitted in a block, or the LRC or last CRC character + * in the Epilogue field, that is, the last character transmitted. This field + * must be programed or adjusted only when C2[TE] is cleared. + */ +/*@{*/ +#define BP_UART_TL7816_TLEN (0U) /*!< Bit position for UART_TL7816_TLEN. */ +#define BM_UART_TL7816_TLEN (0xFFU) /*!< Bit mask for UART_TL7816_TLEN. */ +#define BS_UART_TL7816_TLEN (8U) /*!< Bit field size in bits for UART_TL7816_TLEN. */ + +/*! @brief Read current value of the UART_TL7816_TLEN field. */ +#define BR_UART_TL7816_TLEN(x) (HW_UART_TL7816(x).U) + +/*! @brief Format value for bitfield UART_TL7816_TLEN. */ +#define BF_UART_TL7816_TLEN(v) ((uint8_t)((uint8_t)(v) << BP_UART_TL7816_TLEN) & BM_UART_TL7816_TLEN) + +/*! @brief Set the TLEN field to a new value. */ +#define BW_UART_TL7816_TLEN(x, v) (HW_UART_TL7816_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_AP7816A_T0 - UART 7816 ATR Duration Timer Register A + ******************************************************************************/ + +/*! + * @brief HW_UART_AP7816A_T0 - UART 7816 ATR Duration Timer Register A (RW) + * + * Reset value: 0x00U + * + * The AP7816A_T0 register contains variables used in the generation of the ATR + * Duration Timer. This register may be read at any time. This register must be + * written to only when C7816[ISO_7816E] is not set, except when writing 0 to + * clear the ADT Counter. The ADT Counter starts counting on detection of the + * complete TS Character. It must be noted that by this time, exactly 10 ETUs have + * elapsed since the start bit of the TS character. The user must take this into + * account while programming this register. + */ +typedef union _hw_uart_ap7816a_t0 +{ + uint8_t U; + struct _hw_uart_ap7816a_t0_bitfields + { + uint8_t ADTI_H : 8; /*!< [7:0] ATR Duration Time Integer High + * (C7816[TTYPE] = 0) */ + } B; +} hw_uart_ap7816a_t0_t; + +/*! + * @name Constants and macros for entire UART_AP7816A_T0 register + */ +/*@{*/ +#define HW_UART_AP7816A_T0_ADDR(x) ((x) + 0x3AU) + +#define HW_UART_AP7816A_T0(x) (*(__IO hw_uart_ap7816a_t0_t *) HW_UART_AP7816A_T0_ADDR(x)) +#define HW_UART_AP7816A_T0_RD(x) (HW_UART_AP7816A_T0(x).U) +#define HW_UART_AP7816A_T0_WR(x, v) (HW_UART_AP7816A_T0(x).U = (v)) +#define HW_UART_AP7816A_T0_SET(x, v) (HW_UART_AP7816A_T0_WR(x, HW_UART_AP7816A_T0_RD(x) | (v))) +#define HW_UART_AP7816A_T0_CLR(x, v) (HW_UART_AP7816A_T0_WR(x, HW_UART_AP7816A_T0_RD(x) & ~(v))) +#define HW_UART_AP7816A_T0_TOG(x, v) (HW_UART_AP7816A_T0_WR(x, HW_UART_AP7816A_T0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_AP7816A_T0 bitfields + */ + +/*! + * @name Register UART_AP7816A_T0, field ADTI_H[7:0] (RW) + * + * Used to calculate the value used for the ADT Counter. This register field + * provides the most significant byte of the 16 bit ATR Duration Time Integer field + * ADTI formed by {AP7816A_T0[ADTI_H], AP7816B_T0[ADTI_L]}. Programming a value + * of ADTI = 0 disables the ADT counter. This value is used only when C7816[TTYPE] + * = 0. See ATR Duration Time Counter. + */ +/*@{*/ +#define BP_UART_AP7816A_T0_ADTI_H (0U) /*!< Bit position for UART_AP7816A_T0_ADTI_H. */ +#define BM_UART_AP7816A_T0_ADTI_H (0xFFU) /*!< Bit mask for UART_AP7816A_T0_ADTI_H. */ +#define BS_UART_AP7816A_T0_ADTI_H (8U) /*!< Bit field size in bits for UART_AP7816A_T0_ADTI_H. */ + +/*! @brief Read current value of the UART_AP7816A_T0_ADTI_H field. */ +#define BR_UART_AP7816A_T0_ADTI_H(x) (HW_UART_AP7816A_T0(x).U) + +/*! @brief Format value for bitfield UART_AP7816A_T0_ADTI_H. */ +#define BF_UART_AP7816A_T0_ADTI_H(v) ((uint8_t)((uint8_t)(v) << BP_UART_AP7816A_T0_ADTI_H) & BM_UART_AP7816A_T0_ADTI_H) + +/*! @brief Set the ADTI_H field to a new value. */ +#define BW_UART_AP7816A_T0_ADTI_H(x, v) (HW_UART_AP7816A_T0_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_AP7816B_T0 - UART 7816 ATR Duration Timer Register B + ******************************************************************************/ + +/*! + * @brief HW_UART_AP7816B_T0 - UART 7816 ATR Duration Timer Register B (RW) + * + * Reset value: 0x00U + * + * The AP7816B_T0 register contains variables used in the generation of the ATR + * Duration Timer. This register may be read at any time. This register must be + * written to only when C7816[ISO_7816E] is not set, except when writing 0 to + * clear the ADT Counter. The ADT Counter starts counting on detection of the + * complete TS Character. It must be noted that by this time, exactly 10 ETUs have + * elapsed since the start bit of the TS character. The user must take this into + * account while programming this register. + */ +typedef union _hw_uart_ap7816b_t0 +{ + uint8_t U; + struct _hw_uart_ap7816b_t0_bitfields + { + uint8_t ADTI_L : 8; /*!< [7:0] ATR Duration Time Integer Low + * (C7816[TTYPE] = 0) */ + } B; +} hw_uart_ap7816b_t0_t; + +/*! + * @name Constants and macros for entire UART_AP7816B_T0 register + */ +/*@{*/ +#define HW_UART_AP7816B_T0_ADDR(x) ((x) + 0x3BU) + +#define HW_UART_AP7816B_T0(x) (*(__IO hw_uart_ap7816b_t0_t *) HW_UART_AP7816B_T0_ADDR(x)) +#define HW_UART_AP7816B_T0_RD(x) (HW_UART_AP7816B_T0(x).U) +#define HW_UART_AP7816B_T0_WR(x, v) (HW_UART_AP7816B_T0(x).U = (v)) +#define HW_UART_AP7816B_T0_SET(x, v) (HW_UART_AP7816B_T0_WR(x, HW_UART_AP7816B_T0_RD(x) | (v))) +#define HW_UART_AP7816B_T0_CLR(x, v) (HW_UART_AP7816B_T0_WR(x, HW_UART_AP7816B_T0_RD(x) & ~(v))) +#define HW_UART_AP7816B_T0_TOG(x, v) (HW_UART_AP7816B_T0_WR(x, HW_UART_AP7816B_T0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_AP7816B_T0 bitfields + */ + +/*! + * @name Register UART_AP7816B_T0, field ADTI_L[7:0] (RW) + * + * Used to calculate the value used for the ADT counter. This register field + * provides the least significant byte of the 16 bit ATR Duration Time Integer field + * ADTI formed by {AP7816A_T0[ADTI_H], AP7816B_T0[ADTI_L]}. Programming a value + * of ADTI = 0 disables the ADT counter. This value is used only when + * C7816[TTYPE] = 0. See ATR Duration Time Counter. + */ +/*@{*/ +#define BP_UART_AP7816B_T0_ADTI_L (0U) /*!< Bit position for UART_AP7816B_T0_ADTI_L. */ +#define BM_UART_AP7816B_T0_ADTI_L (0xFFU) /*!< Bit mask for UART_AP7816B_T0_ADTI_L. */ +#define BS_UART_AP7816B_T0_ADTI_L (8U) /*!< Bit field size in bits for UART_AP7816B_T0_ADTI_L. */ + +/*! @brief Read current value of the UART_AP7816B_T0_ADTI_L field. */ +#define BR_UART_AP7816B_T0_ADTI_L(x) (HW_UART_AP7816B_T0(x).U) + +/*! @brief Format value for bitfield UART_AP7816B_T0_ADTI_L. */ +#define BF_UART_AP7816B_T0_ADTI_L(v) ((uint8_t)((uint8_t)(v) << BP_UART_AP7816B_T0_ADTI_L) & BM_UART_AP7816B_T0_ADTI_L) + +/*! @brief Set the ADTI_L field to a new value. */ +#define BW_UART_AP7816B_T0_ADTI_L(x, v) (HW_UART_AP7816B_T0_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_WP7816A_T0 - UART 7816 Wait Parameter Register A + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816A_T0 - UART 7816 Wait Parameter Register A (RW) + * + * Reset value: 0x00U + * + * The WP7816A_T0 register contains constants used in the generation of various + * wait time counters. To save register space, this register is used differently + * when C7816[TTYPE] = 0 and C7816[TTYPE] = 1. This register may be read at any + * time. This register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816a_t0 +{ + uint8_t U; + struct _hw_uart_wp7816a_t0_bitfields + { + uint8_t WI_H : 8; /*!< [7:0] Wait Time Integer High (C7816[TTYPE] = + * 0) */ + } B; +} hw_uart_wp7816a_t0_t; + +/*! + * @name Constants and macros for entire UART_WP7816A_T0 register + */ +/*@{*/ +#define HW_UART_WP7816A_T0_ADDR(x) ((x) + 0x3CU) + +#define HW_UART_WP7816A_T0(x) (*(__IO hw_uart_wp7816a_t0_t *) HW_UART_WP7816A_T0_ADDR(x)) +#define HW_UART_WP7816A_T0_RD(x) (HW_UART_WP7816A_T0(x).U) +#define HW_UART_WP7816A_T0_WR(x, v) (HW_UART_WP7816A_T0(x).U = (v)) +#define HW_UART_WP7816A_T0_SET(x, v) (HW_UART_WP7816A_T0_WR(x, HW_UART_WP7816A_T0_RD(x) | (v))) +#define HW_UART_WP7816A_T0_CLR(x, v) (HW_UART_WP7816A_T0_WR(x, HW_UART_WP7816A_T0_RD(x) & ~(v))) +#define HW_UART_WP7816A_T0_TOG(x, v) (HW_UART_WP7816A_T0_WR(x, HW_UART_WP7816A_T0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816A_T0 bitfields + */ + +/*! + * @name Register UART_WP7816A_T0, field WI_H[7:0] (RW) + * + * Used to calculate the value used for the WT counter. This register field + * provides the most significant byte of the 16 bit Wait Time Integer field WI formed + * by {WP7816A_T0[WI_H], WP7816B_T0[WI_L]}. The value of WI = 0 is invalid and + * must not be programmed. This value is used only when C7816[TTYPE] = 0. See Wait + * time and guard time parameters. + */ +/*@{*/ +#define BP_UART_WP7816A_T0_WI_H (0U) /*!< Bit position for UART_WP7816A_T0_WI_H. */ +#define BM_UART_WP7816A_T0_WI_H (0xFFU) /*!< Bit mask for UART_WP7816A_T0_WI_H. */ +#define BS_UART_WP7816A_T0_WI_H (8U) /*!< Bit field size in bits for UART_WP7816A_T0_WI_H. */ + +/*! @brief Read current value of the UART_WP7816A_T0_WI_H field. */ +#define BR_UART_WP7816A_T0_WI_H(x) (HW_UART_WP7816A_T0(x).U) + +/*! @brief Format value for bitfield UART_WP7816A_T0_WI_H. */ +#define BF_UART_WP7816A_T0_WI_H(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816A_T0_WI_H) & BM_UART_WP7816A_T0_WI_H) + +/*! @brief Set the WI_H field to a new value. */ +#define BW_UART_WP7816A_T0_WI_H(x, v) (HW_UART_WP7816A_T0_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_UART_WP7816B_T0 - UART 7816 Wait Parameter Register B + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816B_T0 - UART 7816 Wait Parameter Register B (RW) + * + * Reset value: 0x14U + * + * The WP7816B_T0 register contains constants used in the generation of various + * wait time counters. To save register space, this register is used differently + * when C7816[TTYPE] = 0 and C7816[TTYPE] = 1. This register may be read at any + * time. This register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816b_t0 +{ + uint8_t U; + struct _hw_uart_wp7816b_t0_bitfields + { + uint8_t WI_L : 8; /*!< [7:0] Wait Time Integer Low (C7816[TTYPE] = 0) + * */ + } B; +} hw_uart_wp7816b_t0_t; + +/*! + * @name Constants and macros for entire UART_WP7816B_T0 register + */ +/*@{*/ +#define HW_UART_WP7816B_T0_ADDR(x) ((x) + 0x3DU) + +#define HW_UART_WP7816B_T0(x) (*(__IO hw_uart_wp7816b_t0_t *) HW_UART_WP7816B_T0_ADDR(x)) +#define HW_UART_WP7816B_T0_RD(x) (HW_UART_WP7816B_T0(x).U) +#define HW_UART_WP7816B_T0_WR(x, v) (HW_UART_WP7816B_T0(x).U = (v)) +#define HW_UART_WP7816B_T0_SET(x, v) (HW_UART_WP7816B_T0_WR(x, HW_UART_WP7816B_T0_RD(x) | (v))) +#define HW_UART_WP7816B_T0_CLR(x, v) (HW_UART_WP7816B_T0_WR(x, HW_UART_WP7816B_T0_RD(x) & ~(v))) +#define HW_UART_WP7816B_T0_TOG(x, v) (HW_UART_WP7816B_T0_WR(x, HW_UART_WP7816B_T0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816B_T0 bitfields + */ + +/*! + * @name Register UART_WP7816B_T0, field WI_L[7:0] (RW) + * + * Used to calculate the value used for the WT counter. This register field + * provides the least significant byte of the 16 bit Wait Time Integer field WI + * formed by {WP7816A_T0[WI_H], WP7816B_T0[WI_L]} . The value of WI = 0 is invalid and + * must not be programmed. This value is used only when C7816[TTYPE] = 0. See + * Wait time and guard time parameters. + */ +/*@{*/ +#define BP_UART_WP7816B_T0_WI_L (0U) /*!< Bit position for UART_WP7816B_T0_WI_L. */ +#define BM_UART_WP7816B_T0_WI_L (0xFFU) /*!< Bit mask for UART_WP7816B_T0_WI_L. */ +#define BS_UART_WP7816B_T0_WI_L (8U) /*!< Bit field size in bits for UART_WP7816B_T0_WI_L. */ + +/*! @brief Read current value of the UART_WP7816B_T0_WI_L field. */ +#define BR_UART_WP7816B_T0_WI_L(x) (HW_UART_WP7816B_T0(x).U) + +/*! @brief Format value for bitfield UART_WP7816B_T0_WI_L. */ +#define BF_UART_WP7816B_T0_WI_L(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816B_T0_WI_L) & BM_UART_WP7816B_T0_WI_L) + +/*! @brief Set the WI_L field to a new value. */ +#define BW_UART_WP7816B_T0_WI_L(x, v) (HW_UART_WP7816B_T0_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_UART_WP7816A_T1 - UART 7816 Wait Parameter Register A + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816A_T1 - UART 7816 Wait Parameter Register A (RW) + * + * Reset value: 0x00U + * + * The WP7816A_T1 register contains constants used in the generation of various + * wait time counters. To save register space, this register is used differently + * when C7816[TTYPE] = 0 and C7816[TTYPE] = 1. This register may be read at any + * time. This register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816a_t1 +{ + uint8_t U; + struct _hw_uart_wp7816a_t1_bitfields + { + uint8_t BWI_H : 8; /*!< [7:0] Block Wait Time Integer High + * (C7816[TTYPE] = 1) */ + } B; +} hw_uart_wp7816a_t1_t; + +/*! + * @name Constants and macros for entire UART_WP7816A_T1 register + */ +/*@{*/ +#define HW_UART_WP7816A_T1_ADDR(x) ((x) + 0x3CU) + +#define HW_UART_WP7816A_T1(x) (*(__IO hw_uart_wp7816a_t1_t *) HW_UART_WP7816A_T1_ADDR(x)) +#define HW_UART_WP7816A_T1_RD(x) (HW_UART_WP7816A_T1(x).U) +#define HW_UART_WP7816A_T1_WR(x, v) (HW_UART_WP7816A_T1(x).U = (v)) +#define HW_UART_WP7816A_T1_SET(x, v) (HW_UART_WP7816A_T1_WR(x, HW_UART_WP7816A_T1_RD(x) | (v))) +#define HW_UART_WP7816A_T1_CLR(x, v) (HW_UART_WP7816A_T1_WR(x, HW_UART_WP7816A_T1_RD(x) & ~(v))) +#define HW_UART_WP7816A_T1_TOG(x, v) (HW_UART_WP7816A_T1_WR(x, HW_UART_WP7816A_T1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816A_T1 bitfields + */ + +/*! + * @name Register UART_WP7816A_T1, field BWI_H[7:0] (RW) + * + * Used to calculate the value used for the BWT counter. This register field + * provides the most significant byte of the 16 bit Block Wait Time Integer field + * BWI formed by {WP7816A_T1[BWI_H], WP7816B_T1[BWI_L]}. The value of BWI = 0 is + * invalid and should not be programmed. This value is used only when C7816[TTYPE] + * = 1. See Wait time and guard time parameters. + */ +/*@{*/ +#define BP_UART_WP7816A_T1_BWI_H (0U) /*!< Bit position for UART_WP7816A_T1_BWI_H. */ +#define BM_UART_WP7816A_T1_BWI_H (0xFFU) /*!< Bit mask for UART_WP7816A_T1_BWI_H. */ +#define BS_UART_WP7816A_T1_BWI_H (8U) /*!< Bit field size in bits for UART_WP7816A_T1_BWI_H. */ + +/*! @brief Read current value of the UART_WP7816A_T1_BWI_H field. */ +#define BR_UART_WP7816A_T1_BWI_H(x) (HW_UART_WP7816A_T1(x).U) + +/*! @brief Format value for bitfield UART_WP7816A_T1_BWI_H. */ +#define BF_UART_WP7816A_T1_BWI_H(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816A_T1_BWI_H) & BM_UART_WP7816A_T1_BWI_H) + +/*! @brief Set the BWI_H field to a new value. */ +#define BW_UART_WP7816A_T1_BWI_H(x, v) (HW_UART_WP7816A_T1_WR(x, v)) +/*@}*/ +/******************************************************************************* + * HW_UART_WP7816B_T1 - UART 7816 Wait Parameter Register B + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816B_T1 - UART 7816 Wait Parameter Register B (RW) + * + * Reset value: 0x14U + * + * The WP7816B_T1 register contains constants used in the generation of various + * wait time counters. To save register space, this register is used differently + * when C7816[TTYPE] = 0 and C7816[TTYPE] = 1. This register may be read at any + * time. This register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816b_t1 +{ + uint8_t U; + struct _hw_uart_wp7816b_t1_bitfields + { + uint8_t BWI_L : 8; /*!< [7:0] Block Wait Time Integer Low + * (C7816[TTYPE] = 1) */ + } B; +} hw_uart_wp7816b_t1_t; + +/*! + * @name Constants and macros for entire UART_WP7816B_T1 register + */ +/*@{*/ +#define HW_UART_WP7816B_T1_ADDR(x) ((x) + 0x3DU) + +#define HW_UART_WP7816B_T1(x) (*(__IO hw_uart_wp7816b_t1_t *) HW_UART_WP7816B_T1_ADDR(x)) +#define HW_UART_WP7816B_T1_RD(x) (HW_UART_WP7816B_T1(x).U) +#define HW_UART_WP7816B_T1_WR(x, v) (HW_UART_WP7816B_T1(x).U = (v)) +#define HW_UART_WP7816B_T1_SET(x, v) (HW_UART_WP7816B_T1_WR(x, HW_UART_WP7816B_T1_RD(x) | (v))) +#define HW_UART_WP7816B_T1_CLR(x, v) (HW_UART_WP7816B_T1_WR(x, HW_UART_WP7816B_T1_RD(x) & ~(v))) +#define HW_UART_WP7816B_T1_TOG(x, v) (HW_UART_WP7816B_T1_WR(x, HW_UART_WP7816B_T1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816B_T1 bitfields + */ + +/*! + * @name Register UART_WP7816B_T1, field BWI_L[7:0] (RW) + * + * Used to calculate the value used for the BWT counter. This register field + * provides the least significant byte of the 16 bit Block Wait Time Integer field + * BWI formed by {WP7816A_T1[BWI_H], WP7816B_T1[BWI_L]}. The value of BWI = 0 is + * invalid and should not be programmed. This value is used only when C7816[TTYPE] + * = 1. See Wait time and guard time parameters. + */ +/*@{*/ +#define BP_UART_WP7816B_T1_BWI_L (0U) /*!< Bit position for UART_WP7816B_T1_BWI_L. */ +#define BM_UART_WP7816B_T1_BWI_L (0xFFU) /*!< Bit mask for UART_WP7816B_T1_BWI_L. */ +#define BS_UART_WP7816B_T1_BWI_L (8U) /*!< Bit field size in bits for UART_WP7816B_T1_BWI_L. */ + +/*! @brief Read current value of the UART_WP7816B_T1_BWI_L field. */ +#define BR_UART_WP7816B_T1_BWI_L(x) (HW_UART_WP7816B_T1(x).U) + +/*! @brief Format value for bitfield UART_WP7816B_T1_BWI_L. */ +#define BF_UART_WP7816B_T1_BWI_L(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816B_T1_BWI_L) & BM_UART_WP7816B_T1_BWI_L) + +/*! @brief Set the BWI_L field to a new value. */ +#define BW_UART_WP7816B_T1_BWI_L(x, v) (HW_UART_WP7816B_T1_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_UART_WGP7816_T1 - UART 7816 Wait and Guard Parameter Register + ******************************************************************************/ + +/*! + * @brief HW_UART_WGP7816_T1 - UART 7816 Wait and Guard Parameter Register (RW) + * + * Reset value: 0x06U + * + * The WGP7816_T1 register contains constants used in the generation of various + * wait and guard timer counters. This register may be read at any time. This + * register must be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wgp7816_t1 +{ + uint8_t U; + struct _hw_uart_wgp7816_t1_bitfields + { + uint8_t BGI : 4; /*!< [3:0] Block Guard Time Integer (C7816[TTYPE] = + * 1) */ + uint8_t CWI1 : 4; /*!< [7:4] Character Wait Time Integer 1 + * (C7816[TTYPE] = 1) */ + } B; +} hw_uart_wgp7816_t1_t; + +/*! + * @name Constants and macros for entire UART_WGP7816_T1 register + */ +/*@{*/ +#define HW_UART_WGP7816_T1_ADDR(x) ((x) + 0x3EU) + +#define HW_UART_WGP7816_T1(x) (*(__IO hw_uart_wgp7816_t1_t *) HW_UART_WGP7816_T1_ADDR(x)) +#define HW_UART_WGP7816_T1_RD(x) (HW_UART_WGP7816_T1(x).U) +#define HW_UART_WGP7816_T1_WR(x, v) (HW_UART_WGP7816_T1(x).U = (v)) +#define HW_UART_WGP7816_T1_SET(x, v) (HW_UART_WGP7816_T1_WR(x, HW_UART_WGP7816_T1_RD(x) | (v))) +#define HW_UART_WGP7816_T1_CLR(x, v) (HW_UART_WGP7816_T1_WR(x, HW_UART_WGP7816_T1_RD(x) & ~(v))) +#define HW_UART_WGP7816_T1_TOG(x, v) (HW_UART_WGP7816_T1_WR(x, HW_UART_WGP7816_T1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WGP7816_T1 bitfields + */ + +/*! + * @name Register UART_WGP7816_T1, field BGI[3:0] (RW) + * + * Used to calculate the value used for the BGT counter. It represent a value + * between 0 and 15. This value is used only when C7816[TTYPE] = 1. See Wait time + * and guard time parameters . + */ +/*@{*/ +#define BP_UART_WGP7816_T1_BGI (0U) /*!< Bit position for UART_WGP7816_T1_BGI. */ +#define BM_UART_WGP7816_T1_BGI (0x0FU) /*!< Bit mask for UART_WGP7816_T1_BGI. */ +#define BS_UART_WGP7816_T1_BGI (4U) /*!< Bit field size in bits for UART_WGP7816_T1_BGI. */ + +/*! @brief Read current value of the UART_WGP7816_T1_BGI field. */ +#define BR_UART_WGP7816_T1_BGI(x) (HW_UART_WGP7816_T1(x).B.BGI) + +/*! @brief Format value for bitfield UART_WGP7816_T1_BGI. */ +#define BF_UART_WGP7816_T1_BGI(v) ((uint8_t)((uint8_t)(v) << BP_UART_WGP7816_T1_BGI) & BM_UART_WGP7816_T1_BGI) + +/*! @brief Set the BGI field to a new value. */ +#define BW_UART_WGP7816_T1_BGI(x, v) (HW_UART_WGP7816_T1_WR(x, (HW_UART_WGP7816_T1_RD(x) & ~BM_UART_WGP7816_T1_BGI) | BF_UART_WGP7816_T1_BGI(v))) +/*@}*/ + +/*! + * @name Register UART_WGP7816_T1, field CWI1[7:4] (RW) + * + * Used to calculate the value used for the CWT counter. It represents a value + * between 0 and 15. This value is used only when C7816[TTYPE] = 1. See Wait time + * and guard time parameters . + */ +/*@{*/ +#define BP_UART_WGP7816_T1_CWI1 (4U) /*!< Bit position for UART_WGP7816_T1_CWI1. */ +#define BM_UART_WGP7816_T1_CWI1 (0xF0U) /*!< Bit mask for UART_WGP7816_T1_CWI1. */ +#define BS_UART_WGP7816_T1_CWI1 (4U) /*!< Bit field size in bits for UART_WGP7816_T1_CWI1. */ + +/*! @brief Read current value of the UART_WGP7816_T1_CWI1 field. */ +#define BR_UART_WGP7816_T1_CWI1(x) (HW_UART_WGP7816_T1(x).B.CWI1) + +/*! @brief Format value for bitfield UART_WGP7816_T1_CWI1. */ +#define BF_UART_WGP7816_T1_CWI1(v) ((uint8_t)((uint8_t)(v) << BP_UART_WGP7816_T1_CWI1) & BM_UART_WGP7816_T1_CWI1) + +/*! @brief Set the CWI1 field to a new value. */ +#define BW_UART_WGP7816_T1_CWI1(x, v) (HW_UART_WGP7816_T1_WR(x, (HW_UART_WGP7816_T1_RD(x) & ~BM_UART_WGP7816_T1_CWI1) | BF_UART_WGP7816_T1_CWI1(v))) +/*@}*/ + +/******************************************************************************* + * HW_UART_WP7816C_T1 - UART 7816 Wait Parameter Register C + ******************************************************************************/ + +/*! + * @brief HW_UART_WP7816C_T1 - UART 7816 Wait Parameter Register C (RW) + * + * Reset value: 0x0BU + * + * The WP7816C_T1 register contains constants used in the generation of various + * wait timer counters. This register may be read at any time. This register must + * be written to only when C7816[ISO_7816E] is not set. + */ +typedef union _hw_uart_wp7816c_t1 +{ + uint8_t U; + struct _hw_uart_wp7816c_t1_bitfields + { + uint8_t CWI2 : 5; /*!< [4:0] Character Wait Time Integer 2 + * (C7816[TTYPE] = 1) */ + uint8_t RESERVED0 : 3; /*!< [7:5] */ + } B; +} hw_uart_wp7816c_t1_t; + +/*! + * @name Constants and macros for entire UART_WP7816C_T1 register + */ +/*@{*/ +#define HW_UART_WP7816C_T1_ADDR(x) ((x) + 0x3FU) + +#define HW_UART_WP7816C_T1(x) (*(__IO hw_uart_wp7816c_t1_t *) HW_UART_WP7816C_T1_ADDR(x)) +#define HW_UART_WP7816C_T1_RD(x) (HW_UART_WP7816C_T1(x).U) +#define HW_UART_WP7816C_T1_WR(x, v) (HW_UART_WP7816C_T1(x).U = (v)) +#define HW_UART_WP7816C_T1_SET(x, v) (HW_UART_WP7816C_T1_WR(x, HW_UART_WP7816C_T1_RD(x) | (v))) +#define HW_UART_WP7816C_T1_CLR(x, v) (HW_UART_WP7816C_T1_WR(x, HW_UART_WP7816C_T1_RD(x) & ~(v))) +#define HW_UART_WP7816C_T1_TOG(x, v) (HW_UART_WP7816C_T1_WR(x, HW_UART_WP7816C_T1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual UART_WP7816C_T1 bitfields + */ + +/*! + * @name Register UART_WP7816C_T1, field CWI2[4:0] (RW) + * + * Used to calculate the value used for the CWT counter. It represents a value + * between 0 and 31. This value is used only when C7816[TTYPE] = 1. See Wait time + * and guard time parameters . + */ +/*@{*/ +#define BP_UART_WP7816C_T1_CWI2 (0U) /*!< Bit position for UART_WP7816C_T1_CWI2. */ +#define BM_UART_WP7816C_T1_CWI2 (0x1FU) /*!< Bit mask for UART_WP7816C_T1_CWI2. */ +#define BS_UART_WP7816C_T1_CWI2 (5U) /*!< Bit field size in bits for UART_WP7816C_T1_CWI2. */ + +/*! @brief Read current value of the UART_WP7816C_T1_CWI2 field. */ +#define BR_UART_WP7816C_T1_CWI2(x) (HW_UART_WP7816C_T1(x).B.CWI2) + +/*! @brief Format value for bitfield UART_WP7816C_T1_CWI2. */ +#define BF_UART_WP7816C_T1_CWI2(v) ((uint8_t)((uint8_t)(v) << BP_UART_WP7816C_T1_CWI2) & BM_UART_WP7816C_T1_CWI2) + +/*! @brief Set the CWI2 field to a new value. */ +#define BW_UART_WP7816C_T1_CWI2(x, v) (HW_UART_WP7816C_T1_WR(x, (HW_UART_WP7816C_T1_RD(x) & ~BM_UART_WP7816C_T1_CWI2) | BF_UART_WP7816C_T1_CWI2(v))) +/*@}*/ + +/* +** Start of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma push + #pragma anon_unions +#elif defined(__CWCC__) + #pragma push + #pragma cpp_extensions on +#elif defined(__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=extended +#else + #error Not supported compiler type +#endif + +/******************************************************************************* + * hw_uart_t - module struct + ******************************************************************************/ +/*! + * @brief All UART module registers. + */ +#pragma pack(1) +typedef struct _hw_uart +{ + __IO hw_uart_bdh_t BDH; /*!< [0x0] UART Baud Rate Registers: High */ + __IO hw_uart_bdl_t BDL; /*!< [0x1] UART Baud Rate Registers: Low */ + __IO hw_uart_c1_t C1; /*!< [0x2] UART Control Register 1 */ + __IO hw_uart_c2_t C2; /*!< [0x3] UART Control Register 2 */ + __I hw_uart_s1_t S1; /*!< [0x4] UART Status Register 1 */ + __IO hw_uart_s2_t S2; /*!< [0x5] UART Status Register 2 */ + __IO hw_uart_c3_t C3; /*!< [0x6] UART Control Register 3 */ + __IO hw_uart_d_t D; /*!< [0x7] UART Data Register */ + __IO hw_uart_ma1_t MA1; /*!< [0x8] UART Match Address Registers 1 */ + __IO hw_uart_ma2_t MA2; /*!< [0x9] UART Match Address Registers 2 */ + __IO hw_uart_c4_t C4; /*!< [0xA] UART Control Register 4 */ + __IO hw_uart_c5_t C5; /*!< [0xB] UART Control Register 5 */ + __I hw_uart_ed_t ED; /*!< [0xC] UART Extended Data Register */ + __IO hw_uart_modem_t MODEM; /*!< [0xD] UART Modem Register */ + __IO hw_uart_ir_t IR; /*!< [0xE] UART Infrared Register */ + uint8_t _reserved0[1]; + __IO hw_uart_pfifo_t PFIFO; /*!< [0x10] UART FIFO Parameters */ + __IO hw_uart_cfifo_t CFIFO; /*!< [0x11] UART FIFO Control Register */ + __IO hw_uart_sfifo_t SFIFO; /*!< [0x12] UART FIFO Status Register */ + __IO hw_uart_twfifo_t TWFIFO; /*!< [0x13] UART FIFO Transmit Watermark */ + __I hw_uart_tcfifo_t TCFIFO; /*!< [0x14] UART FIFO Transmit Count */ + __IO hw_uart_rwfifo_t RWFIFO; /*!< [0x15] UART FIFO Receive Watermark */ + __I hw_uart_rcfifo_t RCFIFO; /*!< [0x16] UART FIFO Receive Count */ + uint8_t _reserved1[1]; + __IO hw_uart_c7816_t C7816; /*!< [0x18] UART 7816 Control Register */ + __IO hw_uart_ie7816_t IE7816; /*!< [0x19] UART 7816 Interrupt Enable Register */ + __IO hw_uart_is7816_t IS7816; /*!< [0x1A] UART 7816 Interrupt Status Register */ + __IO hw_uart_wp7816_t WP7816; /*!< [0x1B] UART 7816 Wait Parameter Register */ + __IO hw_uart_wn7816_t WN7816; /*!< [0x1C] UART 7816 Wait N Register */ + __IO hw_uart_wf7816_t WF7816; /*!< [0x1D] UART 7816 Wait FD Register */ + __IO hw_uart_et7816_t ET7816; /*!< [0x1E] UART 7816 Error Threshold Register */ + __IO hw_uart_tl7816_t TL7816; /*!< [0x1F] UART 7816 Transmit Length Register */ + uint8_t _reserved2[26]; + __IO hw_uart_ap7816a_t0_t AP7816A_T0; /*!< [0x3A] UART 7816 ATR Duration Timer Register A */ + __IO hw_uart_ap7816b_t0_t AP7816B_T0; /*!< [0x3B] UART 7816 ATR Duration Timer Register B */ + union { + struct { + __IO hw_uart_wp7816a_t0_t WP7816A_T0; /*!< [0x3C] UART 7816 Wait Parameter Register A */ + __IO hw_uart_wp7816b_t0_t WP7816B_T0; /*!< [0x3D] UART 7816 Wait Parameter Register B */ + } TYPE0; + struct { + __IO hw_uart_wp7816a_t1_t WP7816A_T1; /*!< [0x3C] UART 7816 Wait Parameter Register A */ + __IO hw_uart_wp7816b_t1_t WP7816B_T1; /*!< [0x3D] UART 7816 Wait Parameter Register B */ + } TYPE1; + }; + __IO hw_uart_wgp7816_t1_t WGP7816_T1; /*!< [0x3E] UART 7816 Wait and Guard Parameter Register */ + __IO hw_uart_wp7816c_t1_t WP7816C_T1; /*!< [0x3F] UART 7816 Wait Parameter Register C */ +} hw_uart_t; +#pragma pack() + +/*! @brief Macro to access all UART registers. */ +/*! @param x UART module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_UART(UART0_BASE)</code>. */ +#define HW_UART(x) (*(hw_uart_t *)(x)) + +/* +** End of section using anonymous unions +*/ + +#if defined(__ARMCC_VERSION) + #pragma pop +#elif defined(__CWCC__) + #pragma pop +#elif defined(__GNUC__) + /* leave anonymous unions enabled */ +#elif defined(__IAR_SYSTEMS_ICC__) + #pragma language=default +#else + #error Not supported compiler type +#endif + +#endif /* __HW_UART_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_usb.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_usb.h new file mode 100644 index 0000000000..c02b4a02a3 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_usb.h @@ -0,0 +1,3804 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_USB_REGISTERS_H__ +#define __HW_USB_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 USB + * + * Universal Serial Bus, OTG Capable Controller + * + * Registers defined in this header file: + * - HW_USB_PERID - Peripheral ID register + * - HW_USB_IDCOMP - Peripheral ID Complement register + * - HW_USB_REV - Peripheral Revision register + * - HW_USB_ADDINFO - Peripheral Additional Info register + * - HW_USB_OTGISTAT - OTG Interrupt Status register + * - HW_USB_OTGICR - OTG Interrupt Control register + * - HW_USB_OTGSTAT - OTG Status register + * - HW_USB_OTGCTL - OTG Control register + * - HW_USB_ISTAT - Interrupt Status register + * - HW_USB_INTEN - Interrupt Enable register + * - HW_USB_ERRSTAT - Error Interrupt Status register + * - HW_USB_ERREN - Error Interrupt Enable register + * - HW_USB_STAT - Status register + * - HW_USB_CTL - Control register + * - HW_USB_ADDR - Address register + * - HW_USB_BDTPAGE1 - BDT Page register 1 + * - HW_USB_FRMNUML - Frame Number register Low + * - HW_USB_FRMNUMH - Frame Number register High + * - HW_USB_TOKEN - Token register + * - HW_USB_SOFTHLD - SOF Threshold register + * - HW_USB_BDTPAGE2 - BDT Page Register 2 + * - HW_USB_BDTPAGE3 - BDT Page Register 3 + * - HW_USB_ENDPTn - Endpoint Control register + * - HW_USB_USBCTRL - USB Control register + * - HW_USB_OBSERVE - USB OTG Observe register + * - HW_USB_CONTROL - USB OTG Control register + * - HW_USB_USBTRC0 - USB Transceiver Control register 0 + * - HW_USB_USBFRMADJUST - Frame Adjust Register + * - HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control + * - HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register + * - HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status + * + * - hw_usb_t - Struct containing all module registers. + */ + +#define HW_USB_INSTANCE_COUNT (1U) /*!< Number of instances of the USB module. */ + +/******************************************************************************* + * HW_USB_PERID - Peripheral ID register + ******************************************************************************/ + +/*! + * @brief HW_USB_PERID - Peripheral ID register (RO) + * + * Reset value: 0x04U + * + * Reads back the value of 0x04. This value is defined for the USB peripheral. + */ +typedef union _hw_usb_perid +{ + uint8_t U; + struct _hw_usb_perid_bitfields + { + uint8_t ID : 6; /*!< [5:0] Peripheral Identification */ + uint8_t RESERVED0 : 2; /*!< [7:6] */ + } B; +} hw_usb_perid_t; + +/*! + * @name Constants and macros for entire USB_PERID register + */ +/*@{*/ +#define HW_USB_PERID_ADDR(x) ((x) + 0x0U) + +#define HW_USB_PERID(x) (*(__I hw_usb_perid_t *) HW_USB_PERID_ADDR(x)) +#define HW_USB_PERID_RD(x) (HW_USB_PERID(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_PERID bitfields + */ + +/*! + * @name Register USB_PERID, field ID[5:0] (RO) + * + * This field always reads 0x4h. + */ +/*@{*/ +#define BP_USB_PERID_ID (0U) /*!< Bit position for USB_PERID_ID. */ +#define BM_USB_PERID_ID (0x3FU) /*!< Bit mask for USB_PERID_ID. */ +#define BS_USB_PERID_ID (6U) /*!< Bit field size in bits for USB_PERID_ID. */ + +/*! @brief Read current value of the USB_PERID_ID field. */ +#define BR_USB_PERID_ID(x) (HW_USB_PERID(x).B.ID) +/*@}*/ + +/******************************************************************************* + * HW_USB_IDCOMP - Peripheral ID Complement register + ******************************************************************************/ + +/*! + * @brief HW_USB_IDCOMP - Peripheral ID Complement register (RO) + * + * Reset value: 0xFBU + * + * Reads back the complement of the Peripheral ID register. For the USB + * peripheral, the value is 0xFB. + */ +typedef union _hw_usb_idcomp +{ + uint8_t U; + struct _hw_usb_idcomp_bitfields + { + uint8_t NID : 6; /*!< [5:0] */ + uint8_t RESERVED0 : 2; /*!< [7:6] */ + } B; +} hw_usb_idcomp_t; + +/*! + * @name Constants and macros for entire USB_IDCOMP register + */ +/*@{*/ +#define HW_USB_IDCOMP_ADDR(x) ((x) + 0x4U) + +#define HW_USB_IDCOMP(x) (*(__I hw_usb_idcomp_t *) HW_USB_IDCOMP_ADDR(x)) +#define HW_USB_IDCOMP_RD(x) (HW_USB_IDCOMP(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_IDCOMP bitfields + */ + +/*! + * @name Register USB_IDCOMP, field NID[5:0] (RO) + * + * Ones' complement of PERID[ID]. bits. + */ +/*@{*/ +#define BP_USB_IDCOMP_NID (0U) /*!< Bit position for USB_IDCOMP_NID. */ +#define BM_USB_IDCOMP_NID (0x3FU) /*!< Bit mask for USB_IDCOMP_NID. */ +#define BS_USB_IDCOMP_NID (6U) /*!< Bit field size in bits for USB_IDCOMP_NID. */ + +/*! @brief Read current value of the USB_IDCOMP_NID field. */ +#define BR_USB_IDCOMP_NID(x) (HW_USB_IDCOMP(x).B.NID) +/*@}*/ + +/******************************************************************************* + * HW_USB_REV - Peripheral Revision register + ******************************************************************************/ + +/*! + * @brief HW_USB_REV - Peripheral Revision register (RO) + * + * Reset value: 0x33U + * + * Contains the revision number of the USB module. + */ +typedef union _hw_usb_rev +{ + uint8_t U; + struct _hw_usb_rev_bitfields + { + uint8_t REV : 8; /*!< [7:0] Revision */ + } B; +} hw_usb_rev_t; + +/*! + * @name Constants and macros for entire USB_REV register + */ +/*@{*/ +#define HW_USB_REV_ADDR(x) ((x) + 0x8U) + +#define HW_USB_REV(x) (*(__I hw_usb_rev_t *) HW_USB_REV_ADDR(x)) +#define HW_USB_REV_RD(x) (HW_USB_REV(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_REV bitfields + */ + +/*! + * @name Register USB_REV, field REV[7:0] (RO) + * + * Indicates the revision number of the USB Core. + */ +/*@{*/ +#define BP_USB_REV_REV (0U) /*!< Bit position for USB_REV_REV. */ +#define BM_USB_REV_REV (0xFFU) /*!< Bit mask for USB_REV_REV. */ +#define BS_USB_REV_REV (8U) /*!< Bit field size in bits for USB_REV_REV. */ + +/*! @brief Read current value of the USB_REV_REV field. */ +#define BR_USB_REV_REV(x) (HW_USB_REV(x).U) +/*@}*/ + +/******************************************************************************* + * HW_USB_ADDINFO - Peripheral Additional Info register + ******************************************************************************/ + +/*! + * @brief HW_USB_ADDINFO - Peripheral Additional Info register (RO) + * + * Reset value: 0x01U + * + * Reads back the value of the Host Enable bit. + */ +typedef union _hw_usb_addinfo +{ + uint8_t U; + struct _hw_usb_addinfo_bitfields + { + uint8_t IEHOST : 1; /*!< [0] */ + uint8_t RESERVED0 : 7; /*!< [7:1] */ + } B; +} hw_usb_addinfo_t; + +/*! + * @name Constants and macros for entire USB_ADDINFO register + */ +/*@{*/ +#define HW_USB_ADDINFO_ADDR(x) ((x) + 0xCU) + +#define HW_USB_ADDINFO(x) (*(__I hw_usb_addinfo_t *) HW_USB_ADDINFO_ADDR(x)) +#define HW_USB_ADDINFO_RD(x) (HW_USB_ADDINFO(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_ADDINFO bitfields + */ + +/*! + * @name Register USB_ADDINFO, field IEHOST[0] (RO) + * + * This bit is set if host mode is enabled. + */ +/*@{*/ +#define BP_USB_ADDINFO_IEHOST (0U) /*!< Bit position for USB_ADDINFO_IEHOST. */ +#define BM_USB_ADDINFO_IEHOST (0x01U) /*!< Bit mask for USB_ADDINFO_IEHOST. */ +#define BS_USB_ADDINFO_IEHOST (1U) /*!< Bit field size in bits for USB_ADDINFO_IEHOST. */ + +/*! @brief Read current value of the USB_ADDINFO_IEHOST field. */ +#define BR_USB_ADDINFO_IEHOST(x) (BITBAND_ACCESS8(HW_USB_ADDINFO_ADDR(x), BP_USB_ADDINFO_IEHOST)) +/*@}*/ + +/******************************************************************************* + * HW_USB_OTGISTAT - OTG Interrupt Status register + ******************************************************************************/ + +/*! + * @brief HW_USB_OTGISTAT - OTG Interrupt Status register (RW) + * + * Reset value: 0x00U + * + * Records changes of the ID sense and VBUS signals. Software can read this + * register to determine the event that triggers interrupt. Only bits that have + * changed since the last software read are set. Writing a one to a bit clears the + * associated interrupt. + */ +typedef union _hw_usb_otgistat +{ + uint8_t U; + struct _hw_usb_otgistat_bitfields + { + uint8_t AVBUSCHG : 1; /*!< [0] */ + uint8_t RESERVED0 : 1; /*!< [1] */ + uint8_t B_SESS_CHG : 1; /*!< [2] */ + uint8_t SESSVLDCHG : 1; /*!< [3] */ + uint8_t RESERVED1 : 1; /*!< [4] */ + uint8_t LINE_STATE_CHG : 1; /*!< [5] */ + uint8_t ONEMSEC : 1; /*!< [6] */ + uint8_t IDCHG : 1; /*!< [7] */ + } B; +} hw_usb_otgistat_t; + +/*! + * @name Constants and macros for entire USB_OTGISTAT register + */ +/*@{*/ +#define HW_USB_OTGISTAT_ADDR(x) ((x) + 0x10U) + +#define HW_USB_OTGISTAT(x) (*(__IO hw_usb_otgistat_t *) HW_USB_OTGISTAT_ADDR(x)) +#define HW_USB_OTGISTAT_RD(x) (HW_USB_OTGISTAT(x).U) +#define HW_USB_OTGISTAT_WR(x, v) (HW_USB_OTGISTAT(x).U = (v)) +#define HW_USB_OTGISTAT_SET(x, v) (HW_USB_OTGISTAT_WR(x, HW_USB_OTGISTAT_RD(x) | (v))) +#define HW_USB_OTGISTAT_CLR(x, v) (HW_USB_OTGISTAT_WR(x, HW_USB_OTGISTAT_RD(x) & ~(v))) +#define HW_USB_OTGISTAT_TOG(x, v) (HW_USB_OTGISTAT_WR(x, HW_USB_OTGISTAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_OTGISTAT bitfields + */ + +/*! + * @name Register USB_OTGISTAT, field AVBUSCHG[0] (RW) + * + * This bit is set when a change in VBUS is detected on an A device. + */ +/*@{*/ +#define BP_USB_OTGISTAT_AVBUSCHG (0U) /*!< Bit position for USB_OTGISTAT_AVBUSCHG. */ +#define BM_USB_OTGISTAT_AVBUSCHG (0x01U) /*!< Bit mask for USB_OTGISTAT_AVBUSCHG. */ +#define BS_USB_OTGISTAT_AVBUSCHG (1U) /*!< Bit field size in bits for USB_OTGISTAT_AVBUSCHG. */ + +/*! @brief Read current value of the USB_OTGISTAT_AVBUSCHG field. */ +#define BR_USB_OTGISTAT_AVBUSCHG(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_AVBUSCHG)) + +/*! @brief Format value for bitfield USB_OTGISTAT_AVBUSCHG. */ +#define BF_USB_OTGISTAT_AVBUSCHG(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_AVBUSCHG) & BM_USB_OTGISTAT_AVBUSCHG) + +/*! @brief Set the AVBUSCHG field to a new value. */ +#define BW_USB_OTGISTAT_AVBUSCHG(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_AVBUSCHG) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGISTAT, field B_SESS_CHG[2] (RW) + * + * This bit is set when a change in VBUS is detected on a B device. + */ +/*@{*/ +#define BP_USB_OTGISTAT_B_SESS_CHG (2U) /*!< Bit position for USB_OTGISTAT_B_SESS_CHG. */ +#define BM_USB_OTGISTAT_B_SESS_CHG (0x04U) /*!< Bit mask for USB_OTGISTAT_B_SESS_CHG. */ +#define BS_USB_OTGISTAT_B_SESS_CHG (1U) /*!< Bit field size in bits for USB_OTGISTAT_B_SESS_CHG. */ + +/*! @brief Read current value of the USB_OTGISTAT_B_SESS_CHG field. */ +#define BR_USB_OTGISTAT_B_SESS_CHG(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_B_SESS_CHG)) + +/*! @brief Format value for bitfield USB_OTGISTAT_B_SESS_CHG. */ +#define BF_USB_OTGISTAT_B_SESS_CHG(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_B_SESS_CHG) & BM_USB_OTGISTAT_B_SESS_CHG) + +/*! @brief Set the B_SESS_CHG field to a new value. */ +#define BW_USB_OTGISTAT_B_SESS_CHG(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_B_SESS_CHG) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGISTAT, field SESSVLDCHG[3] (RW) + * + * This bit is set when a change in VBUS is detected indicating a session valid + * or a session no longer valid. + */ +/*@{*/ +#define BP_USB_OTGISTAT_SESSVLDCHG (3U) /*!< Bit position for USB_OTGISTAT_SESSVLDCHG. */ +#define BM_USB_OTGISTAT_SESSVLDCHG (0x08U) /*!< Bit mask for USB_OTGISTAT_SESSVLDCHG. */ +#define BS_USB_OTGISTAT_SESSVLDCHG (1U) /*!< Bit field size in bits for USB_OTGISTAT_SESSVLDCHG. */ + +/*! @brief Read current value of the USB_OTGISTAT_SESSVLDCHG field. */ +#define BR_USB_OTGISTAT_SESSVLDCHG(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_SESSVLDCHG)) + +/*! @brief Format value for bitfield USB_OTGISTAT_SESSVLDCHG. */ +#define BF_USB_OTGISTAT_SESSVLDCHG(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_SESSVLDCHG) & BM_USB_OTGISTAT_SESSVLDCHG) + +/*! @brief Set the SESSVLDCHG field to a new value. */ +#define BW_USB_OTGISTAT_SESSVLDCHG(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_SESSVLDCHG) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGISTAT, field LINE_STATE_CHG[5] (RW) + * + * This interrupt is set when the USB line state (CTL[SE0] and CTL[JSTATE] bits) + * are stable without change for 1 millisecond, and the value of the line state + * is different from the last time when the line state was stable. It is set on + * transitions between SE0 and J-state, SE0 and K-state, and J-state and K-state. + * Changes in J-state while SE0 is true do not cause an interrupt. This interrupt + * can be used in detecting Reset, Resume, Connect, and Data Line Pulse + * signaling. + */ +/*@{*/ +#define BP_USB_OTGISTAT_LINE_STATE_CHG (5U) /*!< Bit position for USB_OTGISTAT_LINE_STATE_CHG. */ +#define BM_USB_OTGISTAT_LINE_STATE_CHG (0x20U) /*!< Bit mask for USB_OTGISTAT_LINE_STATE_CHG. */ +#define BS_USB_OTGISTAT_LINE_STATE_CHG (1U) /*!< Bit field size in bits for USB_OTGISTAT_LINE_STATE_CHG. */ + +/*! @brief Read current value of the USB_OTGISTAT_LINE_STATE_CHG field. */ +#define BR_USB_OTGISTAT_LINE_STATE_CHG(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_LINE_STATE_CHG)) + +/*! @brief Format value for bitfield USB_OTGISTAT_LINE_STATE_CHG. */ +#define BF_USB_OTGISTAT_LINE_STATE_CHG(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_LINE_STATE_CHG) & BM_USB_OTGISTAT_LINE_STATE_CHG) + +/*! @brief Set the LINE_STATE_CHG field to a new value. */ +#define BW_USB_OTGISTAT_LINE_STATE_CHG(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_LINE_STATE_CHG) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGISTAT, field ONEMSEC[6] (RW) + * + * This bit is set when the 1 millisecond timer expires. This bit stays asserted + * until cleared by software. The interrupt must be serviced every millisecond + * to avoid losing 1msec counts. + */ +/*@{*/ +#define BP_USB_OTGISTAT_ONEMSEC (6U) /*!< Bit position for USB_OTGISTAT_ONEMSEC. */ +#define BM_USB_OTGISTAT_ONEMSEC (0x40U) /*!< Bit mask for USB_OTGISTAT_ONEMSEC. */ +#define BS_USB_OTGISTAT_ONEMSEC (1U) /*!< Bit field size in bits for USB_OTGISTAT_ONEMSEC. */ + +/*! @brief Read current value of the USB_OTGISTAT_ONEMSEC field. */ +#define BR_USB_OTGISTAT_ONEMSEC(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_ONEMSEC)) + +/*! @brief Format value for bitfield USB_OTGISTAT_ONEMSEC. */ +#define BF_USB_OTGISTAT_ONEMSEC(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_ONEMSEC) & BM_USB_OTGISTAT_ONEMSEC) + +/*! @brief Set the ONEMSEC field to a new value. */ +#define BW_USB_OTGISTAT_ONEMSEC(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_ONEMSEC) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGISTAT, field IDCHG[7] (RW) + * + * This bit is set when a change in the ID Signal from the USB connector is + * sensed. + */ +/*@{*/ +#define BP_USB_OTGISTAT_IDCHG (7U) /*!< Bit position for USB_OTGISTAT_IDCHG. */ +#define BM_USB_OTGISTAT_IDCHG (0x80U) /*!< Bit mask for USB_OTGISTAT_IDCHG. */ +#define BS_USB_OTGISTAT_IDCHG (1U) /*!< Bit field size in bits for USB_OTGISTAT_IDCHG. */ + +/*! @brief Read current value of the USB_OTGISTAT_IDCHG field. */ +#define BR_USB_OTGISTAT_IDCHG(x) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_IDCHG)) + +/*! @brief Format value for bitfield USB_OTGISTAT_IDCHG. */ +#define BF_USB_OTGISTAT_IDCHG(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGISTAT_IDCHG) & BM_USB_OTGISTAT_IDCHG) + +/*! @brief Set the IDCHG field to a new value. */ +#define BW_USB_OTGISTAT_IDCHG(x, v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR(x), BP_USB_OTGISTAT_IDCHG) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_OTGICR - OTG Interrupt Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_OTGICR - OTG Interrupt Control register (RW) + * + * Reset value: 0x00U + * + * Enables the corresponding interrupt status bits defined in the OTG Interrupt + * Status Register. + */ +typedef union _hw_usb_otgicr +{ + uint8_t U; + struct _hw_usb_otgicr_bitfields + { + uint8_t AVBUSEN : 1; /*!< [0] A VBUS Valid Interrupt Enable */ + uint8_t RESERVED0 : 1; /*!< [1] */ + uint8_t BSESSEN : 1; /*!< [2] B Session END Interrupt Enable */ + uint8_t SESSVLDEN : 1; /*!< [3] Session Valid Interrupt Enable */ + uint8_t RESERVED1 : 1; /*!< [4] */ + uint8_t LINESTATEEN : 1; /*!< [5] Line State Change Interrupt Enable + * */ + uint8_t ONEMSECEN : 1; /*!< [6] One Millisecond Interrupt Enable */ + uint8_t IDEN : 1; /*!< [7] ID Interrupt Enable */ + } B; +} hw_usb_otgicr_t; + +/*! + * @name Constants and macros for entire USB_OTGICR register + */ +/*@{*/ +#define HW_USB_OTGICR_ADDR(x) ((x) + 0x14U) + +#define HW_USB_OTGICR(x) (*(__IO hw_usb_otgicr_t *) HW_USB_OTGICR_ADDR(x)) +#define HW_USB_OTGICR_RD(x) (HW_USB_OTGICR(x).U) +#define HW_USB_OTGICR_WR(x, v) (HW_USB_OTGICR(x).U = (v)) +#define HW_USB_OTGICR_SET(x, v) (HW_USB_OTGICR_WR(x, HW_USB_OTGICR_RD(x) | (v))) +#define HW_USB_OTGICR_CLR(x, v) (HW_USB_OTGICR_WR(x, HW_USB_OTGICR_RD(x) & ~(v))) +#define HW_USB_OTGICR_TOG(x, v) (HW_USB_OTGICR_WR(x, HW_USB_OTGICR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_OTGICR bitfields + */ + +/*! + * @name Register USB_OTGICR, field AVBUSEN[0] (RW) + * + * Values: + * - 0 - Disables the AVBUSCHG interrupt. + * - 1 - Enables the AVBUSCHG interrupt. + */ +/*@{*/ +#define BP_USB_OTGICR_AVBUSEN (0U) /*!< Bit position for USB_OTGICR_AVBUSEN. */ +#define BM_USB_OTGICR_AVBUSEN (0x01U) /*!< Bit mask for USB_OTGICR_AVBUSEN. */ +#define BS_USB_OTGICR_AVBUSEN (1U) /*!< Bit field size in bits for USB_OTGICR_AVBUSEN. */ + +/*! @brief Read current value of the USB_OTGICR_AVBUSEN field. */ +#define BR_USB_OTGICR_AVBUSEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_AVBUSEN)) + +/*! @brief Format value for bitfield USB_OTGICR_AVBUSEN. */ +#define BF_USB_OTGICR_AVBUSEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_AVBUSEN) & BM_USB_OTGICR_AVBUSEN) + +/*! @brief Set the AVBUSEN field to a new value. */ +#define BW_USB_OTGICR_AVBUSEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_AVBUSEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGICR, field BSESSEN[2] (RW) + * + * Values: + * - 0 - Disables the B_SESS_CHG interrupt. + * - 1 - Enables the B_SESS_CHG interrupt. + */ +/*@{*/ +#define BP_USB_OTGICR_BSESSEN (2U) /*!< Bit position for USB_OTGICR_BSESSEN. */ +#define BM_USB_OTGICR_BSESSEN (0x04U) /*!< Bit mask for USB_OTGICR_BSESSEN. */ +#define BS_USB_OTGICR_BSESSEN (1U) /*!< Bit field size in bits for USB_OTGICR_BSESSEN. */ + +/*! @brief Read current value of the USB_OTGICR_BSESSEN field. */ +#define BR_USB_OTGICR_BSESSEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_BSESSEN)) + +/*! @brief Format value for bitfield USB_OTGICR_BSESSEN. */ +#define BF_USB_OTGICR_BSESSEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_BSESSEN) & BM_USB_OTGICR_BSESSEN) + +/*! @brief Set the BSESSEN field to a new value. */ +#define BW_USB_OTGICR_BSESSEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_BSESSEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGICR, field SESSVLDEN[3] (RW) + * + * Values: + * - 0 - Disables the SESSVLDCHG interrupt. + * - 1 - Enables the SESSVLDCHG interrupt. + */ +/*@{*/ +#define BP_USB_OTGICR_SESSVLDEN (3U) /*!< Bit position for USB_OTGICR_SESSVLDEN. */ +#define BM_USB_OTGICR_SESSVLDEN (0x08U) /*!< Bit mask for USB_OTGICR_SESSVLDEN. */ +#define BS_USB_OTGICR_SESSVLDEN (1U) /*!< Bit field size in bits for USB_OTGICR_SESSVLDEN. */ + +/*! @brief Read current value of the USB_OTGICR_SESSVLDEN field. */ +#define BR_USB_OTGICR_SESSVLDEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_SESSVLDEN)) + +/*! @brief Format value for bitfield USB_OTGICR_SESSVLDEN. */ +#define BF_USB_OTGICR_SESSVLDEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_SESSVLDEN) & BM_USB_OTGICR_SESSVLDEN) + +/*! @brief Set the SESSVLDEN field to a new value. */ +#define BW_USB_OTGICR_SESSVLDEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_SESSVLDEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGICR, field LINESTATEEN[5] (RW) + * + * Values: + * - 0 - Disables the LINE_STAT_CHG interrupt. + * - 1 - Enables the LINE_STAT_CHG interrupt. + */ +/*@{*/ +#define BP_USB_OTGICR_LINESTATEEN (5U) /*!< Bit position for USB_OTGICR_LINESTATEEN. */ +#define BM_USB_OTGICR_LINESTATEEN (0x20U) /*!< Bit mask for USB_OTGICR_LINESTATEEN. */ +#define BS_USB_OTGICR_LINESTATEEN (1U) /*!< Bit field size in bits for USB_OTGICR_LINESTATEEN. */ + +/*! @brief Read current value of the USB_OTGICR_LINESTATEEN field. */ +#define BR_USB_OTGICR_LINESTATEEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_LINESTATEEN)) + +/*! @brief Format value for bitfield USB_OTGICR_LINESTATEEN. */ +#define BF_USB_OTGICR_LINESTATEEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_LINESTATEEN) & BM_USB_OTGICR_LINESTATEEN) + +/*! @brief Set the LINESTATEEN field to a new value. */ +#define BW_USB_OTGICR_LINESTATEEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_LINESTATEEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGICR, field ONEMSECEN[6] (RW) + * + * Values: + * - 0 - Diables the 1ms timer interrupt. + * - 1 - Enables the 1ms timer interrupt. + */ +/*@{*/ +#define BP_USB_OTGICR_ONEMSECEN (6U) /*!< Bit position for USB_OTGICR_ONEMSECEN. */ +#define BM_USB_OTGICR_ONEMSECEN (0x40U) /*!< Bit mask for USB_OTGICR_ONEMSECEN. */ +#define BS_USB_OTGICR_ONEMSECEN (1U) /*!< Bit field size in bits for USB_OTGICR_ONEMSECEN. */ + +/*! @brief Read current value of the USB_OTGICR_ONEMSECEN field. */ +#define BR_USB_OTGICR_ONEMSECEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_ONEMSECEN)) + +/*! @brief Format value for bitfield USB_OTGICR_ONEMSECEN. */ +#define BF_USB_OTGICR_ONEMSECEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_ONEMSECEN) & BM_USB_OTGICR_ONEMSECEN) + +/*! @brief Set the ONEMSECEN field to a new value. */ +#define BW_USB_OTGICR_ONEMSECEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_ONEMSECEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGICR, field IDEN[7] (RW) + * + * Values: + * - 0 - The ID interrupt is disabled + * - 1 - The ID interrupt is enabled + */ +/*@{*/ +#define BP_USB_OTGICR_IDEN (7U) /*!< Bit position for USB_OTGICR_IDEN. */ +#define BM_USB_OTGICR_IDEN (0x80U) /*!< Bit mask for USB_OTGICR_IDEN. */ +#define BS_USB_OTGICR_IDEN (1U) /*!< Bit field size in bits for USB_OTGICR_IDEN. */ + +/*! @brief Read current value of the USB_OTGICR_IDEN field. */ +#define BR_USB_OTGICR_IDEN(x) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_IDEN)) + +/*! @brief Format value for bitfield USB_OTGICR_IDEN. */ +#define BF_USB_OTGICR_IDEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGICR_IDEN) & BM_USB_OTGICR_IDEN) + +/*! @brief Set the IDEN field to a new value. */ +#define BW_USB_OTGICR_IDEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR(x), BP_USB_OTGICR_IDEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_OTGSTAT - OTG Status register + ******************************************************************************/ + +/*! + * @brief HW_USB_OTGSTAT - OTG Status register (RW) + * + * Reset value: 0x00U + * + * Displays the actual value from the external comparator outputs of the ID pin + * and VBUS. + */ +typedef union _hw_usb_otgstat +{ + uint8_t U; + struct _hw_usb_otgstat_bitfields + { + uint8_t AVBUSVLD : 1; /*!< [0] A VBUS Valid */ + uint8_t RESERVED0 : 1; /*!< [1] */ + uint8_t BSESSEND : 1; /*!< [2] B Session End */ + uint8_t SESS_VLD : 1; /*!< [3] Session Valid */ + uint8_t RESERVED1 : 1; /*!< [4] */ + uint8_t LINESTATESTABLE : 1; /*!< [5] */ + uint8_t ONEMSECEN : 1; /*!< [6] */ + uint8_t ID : 1; /*!< [7] */ + } B; +} hw_usb_otgstat_t; + +/*! + * @name Constants and macros for entire USB_OTGSTAT register + */ +/*@{*/ +#define HW_USB_OTGSTAT_ADDR(x) ((x) + 0x18U) + +#define HW_USB_OTGSTAT(x) (*(__IO hw_usb_otgstat_t *) HW_USB_OTGSTAT_ADDR(x)) +#define HW_USB_OTGSTAT_RD(x) (HW_USB_OTGSTAT(x).U) +#define HW_USB_OTGSTAT_WR(x, v) (HW_USB_OTGSTAT(x).U = (v)) +#define HW_USB_OTGSTAT_SET(x, v) (HW_USB_OTGSTAT_WR(x, HW_USB_OTGSTAT_RD(x) | (v))) +#define HW_USB_OTGSTAT_CLR(x, v) (HW_USB_OTGSTAT_WR(x, HW_USB_OTGSTAT_RD(x) & ~(v))) +#define HW_USB_OTGSTAT_TOG(x, v) (HW_USB_OTGSTAT_WR(x, HW_USB_OTGSTAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_OTGSTAT bitfields + */ + +/*! + * @name Register USB_OTGSTAT, field AVBUSVLD[0] (RW) + * + * Values: + * - 0 - The VBUS voltage is below the A VBUS Valid threshold. + * - 1 - The VBUS voltage is above the A VBUS Valid threshold. + */ +/*@{*/ +#define BP_USB_OTGSTAT_AVBUSVLD (0U) /*!< Bit position for USB_OTGSTAT_AVBUSVLD. */ +#define BM_USB_OTGSTAT_AVBUSVLD (0x01U) /*!< Bit mask for USB_OTGSTAT_AVBUSVLD. */ +#define BS_USB_OTGSTAT_AVBUSVLD (1U) /*!< Bit field size in bits for USB_OTGSTAT_AVBUSVLD. */ + +/*! @brief Read current value of the USB_OTGSTAT_AVBUSVLD field. */ +#define BR_USB_OTGSTAT_AVBUSVLD(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_AVBUSVLD)) + +/*! @brief Format value for bitfield USB_OTGSTAT_AVBUSVLD. */ +#define BF_USB_OTGSTAT_AVBUSVLD(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_AVBUSVLD) & BM_USB_OTGSTAT_AVBUSVLD) + +/*! @brief Set the AVBUSVLD field to a new value. */ +#define BW_USB_OTGSTAT_AVBUSVLD(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_AVBUSVLD) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGSTAT, field BSESSEND[2] (RW) + * + * Values: + * - 0 - The VBUS voltage is above the B session end threshold. + * - 1 - The VBUS voltage is below the B session end threshold. + */ +/*@{*/ +#define BP_USB_OTGSTAT_BSESSEND (2U) /*!< Bit position for USB_OTGSTAT_BSESSEND. */ +#define BM_USB_OTGSTAT_BSESSEND (0x04U) /*!< Bit mask for USB_OTGSTAT_BSESSEND. */ +#define BS_USB_OTGSTAT_BSESSEND (1U) /*!< Bit field size in bits for USB_OTGSTAT_BSESSEND. */ + +/*! @brief Read current value of the USB_OTGSTAT_BSESSEND field. */ +#define BR_USB_OTGSTAT_BSESSEND(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_BSESSEND)) + +/*! @brief Format value for bitfield USB_OTGSTAT_BSESSEND. */ +#define BF_USB_OTGSTAT_BSESSEND(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_BSESSEND) & BM_USB_OTGSTAT_BSESSEND) + +/*! @brief Set the BSESSEND field to a new value. */ +#define BW_USB_OTGSTAT_BSESSEND(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_BSESSEND) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGSTAT, field SESS_VLD[3] (RW) + * + * Values: + * - 0 - The VBUS voltage is below the B session valid threshold + * - 1 - The VBUS voltage is above the B session valid threshold. + */ +/*@{*/ +#define BP_USB_OTGSTAT_SESS_VLD (3U) /*!< Bit position for USB_OTGSTAT_SESS_VLD. */ +#define BM_USB_OTGSTAT_SESS_VLD (0x08U) /*!< Bit mask for USB_OTGSTAT_SESS_VLD. */ +#define BS_USB_OTGSTAT_SESS_VLD (1U) /*!< Bit field size in bits for USB_OTGSTAT_SESS_VLD. */ + +/*! @brief Read current value of the USB_OTGSTAT_SESS_VLD field. */ +#define BR_USB_OTGSTAT_SESS_VLD(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_SESS_VLD)) + +/*! @brief Format value for bitfield USB_OTGSTAT_SESS_VLD. */ +#define BF_USB_OTGSTAT_SESS_VLD(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_SESS_VLD) & BM_USB_OTGSTAT_SESS_VLD) + +/*! @brief Set the SESS_VLD field to a new value. */ +#define BW_USB_OTGSTAT_SESS_VLD(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_SESS_VLD) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGSTAT, field LINESTATESTABLE[5] (RW) + * + * Indicates that the internal signals that control the LINE_STATE_CHG field of + * OTGISTAT are stable for at least 1 millisecond. First read LINE_STATE_CHG + * field and then read this field. If this field reads as 1, then the value of + * LINE_STATE_CHG can be considered stable. + * + * Values: + * - 0 - The LINE_STAT_CHG bit is not yet stable. + * - 1 - The LINE_STAT_CHG bit has been debounced and is stable. + */ +/*@{*/ +#define BP_USB_OTGSTAT_LINESTATESTABLE (5U) /*!< Bit position for USB_OTGSTAT_LINESTATESTABLE. */ +#define BM_USB_OTGSTAT_LINESTATESTABLE (0x20U) /*!< Bit mask for USB_OTGSTAT_LINESTATESTABLE. */ +#define BS_USB_OTGSTAT_LINESTATESTABLE (1U) /*!< Bit field size in bits for USB_OTGSTAT_LINESTATESTABLE. */ + +/*! @brief Read current value of the USB_OTGSTAT_LINESTATESTABLE field. */ +#define BR_USB_OTGSTAT_LINESTATESTABLE(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_LINESTATESTABLE)) + +/*! @brief Format value for bitfield USB_OTGSTAT_LINESTATESTABLE. */ +#define BF_USB_OTGSTAT_LINESTATESTABLE(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_LINESTATESTABLE) & BM_USB_OTGSTAT_LINESTATESTABLE) + +/*! @brief Set the LINESTATESTABLE field to a new value. */ +#define BW_USB_OTGSTAT_LINESTATESTABLE(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_LINESTATESTABLE) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGSTAT, field ONEMSECEN[6] (RW) + * + * This bit is reserved for the 1ms count, but it is not useful to software. + */ +/*@{*/ +#define BP_USB_OTGSTAT_ONEMSECEN (6U) /*!< Bit position for USB_OTGSTAT_ONEMSECEN. */ +#define BM_USB_OTGSTAT_ONEMSECEN (0x40U) /*!< Bit mask for USB_OTGSTAT_ONEMSECEN. */ +#define BS_USB_OTGSTAT_ONEMSECEN (1U) /*!< Bit field size in bits for USB_OTGSTAT_ONEMSECEN. */ + +/*! @brief Read current value of the USB_OTGSTAT_ONEMSECEN field. */ +#define BR_USB_OTGSTAT_ONEMSECEN(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_ONEMSECEN)) + +/*! @brief Format value for bitfield USB_OTGSTAT_ONEMSECEN. */ +#define BF_USB_OTGSTAT_ONEMSECEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_ONEMSECEN) & BM_USB_OTGSTAT_ONEMSECEN) + +/*! @brief Set the ONEMSECEN field to a new value. */ +#define BW_USB_OTGSTAT_ONEMSECEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_ONEMSECEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGSTAT, field ID[7] (RW) + * + * Indicates the current state of the ID pin on the USB connector + * + * Values: + * - 0 - Indicates a Type A cable is plugged into the USB connector. + * - 1 - Indicates no cable is attached or a Type B cable is plugged into the + * USB connector. + */ +/*@{*/ +#define BP_USB_OTGSTAT_ID (7U) /*!< Bit position for USB_OTGSTAT_ID. */ +#define BM_USB_OTGSTAT_ID (0x80U) /*!< Bit mask for USB_OTGSTAT_ID. */ +#define BS_USB_OTGSTAT_ID (1U) /*!< Bit field size in bits for USB_OTGSTAT_ID. */ + +/*! @brief Read current value of the USB_OTGSTAT_ID field. */ +#define BR_USB_OTGSTAT_ID(x) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_ID)) + +/*! @brief Format value for bitfield USB_OTGSTAT_ID. */ +#define BF_USB_OTGSTAT_ID(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGSTAT_ID) & BM_USB_OTGSTAT_ID) + +/*! @brief Set the ID field to a new value. */ +#define BW_USB_OTGSTAT_ID(x, v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR(x), BP_USB_OTGSTAT_ID) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_OTGCTL - OTG Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_OTGCTL - OTG Control register (RW) + * + * Reset value: 0x00U + * + * Controls the operation of VBUS and Data Line termination resistors. + */ +typedef union _hw_usb_otgctl +{ + uint8_t U; + struct _hw_usb_otgctl_bitfields + { + uint8_t RESERVED0 : 2; /*!< [1:0] */ + uint8_t OTGEN : 1; /*!< [2] On-The-Go pullup/pulldown resistor enable + * */ + uint8_t RESERVED1 : 1; /*!< [3] */ + uint8_t DMLOW : 1; /*!< [4] D- Data Line pull-down resistor enable */ + uint8_t DPLOW : 1; /*!< [5] D+ Data Line pull-down resistor enable */ + uint8_t RESERVED2 : 1; /*!< [6] */ + uint8_t DPHIGH : 1; /*!< [7] D+ Data Line pullup resistor enable */ + } B; +} hw_usb_otgctl_t; + +/*! + * @name Constants and macros for entire USB_OTGCTL register + */ +/*@{*/ +#define HW_USB_OTGCTL_ADDR(x) ((x) + 0x1CU) + +#define HW_USB_OTGCTL(x) (*(__IO hw_usb_otgctl_t *) HW_USB_OTGCTL_ADDR(x)) +#define HW_USB_OTGCTL_RD(x) (HW_USB_OTGCTL(x).U) +#define HW_USB_OTGCTL_WR(x, v) (HW_USB_OTGCTL(x).U = (v)) +#define HW_USB_OTGCTL_SET(x, v) (HW_USB_OTGCTL_WR(x, HW_USB_OTGCTL_RD(x) | (v))) +#define HW_USB_OTGCTL_CLR(x, v) (HW_USB_OTGCTL_WR(x, HW_USB_OTGCTL_RD(x) & ~(v))) +#define HW_USB_OTGCTL_TOG(x, v) (HW_USB_OTGCTL_WR(x, HW_USB_OTGCTL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_OTGCTL bitfields + */ + +/*! + * @name Register USB_OTGCTL, field OTGEN[2] (RW) + * + * Values: + * - 0 - If USB_EN is 1 and HOST_MODE is 0 in the Control Register (CTL), then + * the D+ Data Line pull-up resistors are enabled. If HOST_MODE is 1 the D+ + * and D- Data Line pull-down resistors are engaged. + * - 1 - The pull-up and pull-down controls in this register are used. + */ +/*@{*/ +#define BP_USB_OTGCTL_OTGEN (2U) /*!< Bit position for USB_OTGCTL_OTGEN. */ +#define BM_USB_OTGCTL_OTGEN (0x04U) /*!< Bit mask for USB_OTGCTL_OTGEN. */ +#define BS_USB_OTGCTL_OTGEN (1U) /*!< Bit field size in bits for USB_OTGCTL_OTGEN. */ + +/*! @brief Read current value of the USB_OTGCTL_OTGEN field. */ +#define BR_USB_OTGCTL_OTGEN(x) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_OTGEN)) + +/*! @brief Format value for bitfield USB_OTGCTL_OTGEN. */ +#define BF_USB_OTGCTL_OTGEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGCTL_OTGEN) & BM_USB_OTGCTL_OTGEN) + +/*! @brief Set the OTGEN field to a new value. */ +#define BW_USB_OTGCTL_OTGEN(x, v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_OTGEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGCTL, field DMLOW[4] (RW) + * + * Values: + * - 0 - D- pulldown resistor is not enabled. + * - 1 - D- pulldown resistor is enabled. + */ +/*@{*/ +#define BP_USB_OTGCTL_DMLOW (4U) /*!< Bit position for USB_OTGCTL_DMLOW. */ +#define BM_USB_OTGCTL_DMLOW (0x10U) /*!< Bit mask for USB_OTGCTL_DMLOW. */ +#define BS_USB_OTGCTL_DMLOW (1U) /*!< Bit field size in bits for USB_OTGCTL_DMLOW. */ + +/*! @brief Read current value of the USB_OTGCTL_DMLOW field. */ +#define BR_USB_OTGCTL_DMLOW(x) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DMLOW)) + +/*! @brief Format value for bitfield USB_OTGCTL_DMLOW. */ +#define BF_USB_OTGCTL_DMLOW(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGCTL_DMLOW) & BM_USB_OTGCTL_DMLOW) + +/*! @brief Set the DMLOW field to a new value. */ +#define BW_USB_OTGCTL_DMLOW(x, v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DMLOW) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGCTL, field DPLOW[5] (RW) + * + * This bit should always be enabled together with bit 4 (DMLOW) + * + * Values: + * - 0 - D+ pulldown resistor is not enabled. + * - 1 - D+ pulldown resistor is enabled. + */ +/*@{*/ +#define BP_USB_OTGCTL_DPLOW (5U) /*!< Bit position for USB_OTGCTL_DPLOW. */ +#define BM_USB_OTGCTL_DPLOW (0x20U) /*!< Bit mask for USB_OTGCTL_DPLOW. */ +#define BS_USB_OTGCTL_DPLOW (1U) /*!< Bit field size in bits for USB_OTGCTL_DPLOW. */ + +/*! @brief Read current value of the USB_OTGCTL_DPLOW field. */ +#define BR_USB_OTGCTL_DPLOW(x) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DPLOW)) + +/*! @brief Format value for bitfield USB_OTGCTL_DPLOW. */ +#define BF_USB_OTGCTL_DPLOW(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGCTL_DPLOW) & BM_USB_OTGCTL_DPLOW) + +/*! @brief Set the DPLOW field to a new value. */ +#define BW_USB_OTGCTL_DPLOW(x, v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DPLOW) = (v)) +/*@}*/ + +/*! + * @name Register USB_OTGCTL, field DPHIGH[7] (RW) + * + * Values: + * - 0 - D+ pullup resistor is not enabled + * - 1 - D+ pullup resistor is enabled + */ +/*@{*/ +#define BP_USB_OTGCTL_DPHIGH (7U) /*!< Bit position for USB_OTGCTL_DPHIGH. */ +#define BM_USB_OTGCTL_DPHIGH (0x80U) /*!< Bit mask for USB_OTGCTL_DPHIGH. */ +#define BS_USB_OTGCTL_DPHIGH (1U) /*!< Bit field size in bits for USB_OTGCTL_DPHIGH. */ + +/*! @brief Read current value of the USB_OTGCTL_DPHIGH field. */ +#define BR_USB_OTGCTL_DPHIGH(x) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DPHIGH)) + +/*! @brief Format value for bitfield USB_OTGCTL_DPHIGH. */ +#define BF_USB_OTGCTL_DPHIGH(v) ((uint8_t)((uint8_t)(v) << BP_USB_OTGCTL_DPHIGH) & BM_USB_OTGCTL_DPHIGH) + +/*! @brief Set the DPHIGH field to a new value. */ +#define BW_USB_OTGCTL_DPHIGH(x, v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR(x), BP_USB_OTGCTL_DPHIGH) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_ISTAT - Interrupt Status register + ******************************************************************************/ + +/*! + * @brief HW_USB_ISTAT - Interrupt Status register (W1C) + * + * Reset value: 0x00U + * + * Contains fields for each of the interrupt sources within the USB Module. Each + * of these fields are qualified with their respective interrupt enable bits. + * All fields of this register are logically OR'd together along with the OTG + * Interrupt Status Register (OTGSTAT) to form a single interrupt source for the + * processor's interrupt controller. After an interrupt bit has been set it may only + * be cleared by writing a one to the respective interrupt bit. This register + * contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_istat +{ + uint8_t U; + struct _hw_usb_istat_bitfields + { + uint8_t USBRST : 1; /*!< [0] */ + uint8_t ERROR : 1; /*!< [1] */ + uint8_t SOFTOK : 1; /*!< [2] */ + uint8_t TOKDNE : 1; /*!< [3] */ + uint8_t SLEEP : 1; /*!< [4] */ + uint8_t RESUME : 1; /*!< [5] */ + uint8_t ATTACH : 1; /*!< [6] Attach Interrupt */ + uint8_t STALL : 1; /*!< [7] Stall Interrupt */ + } B; +} hw_usb_istat_t; + +/*! + * @name Constants and macros for entire USB_ISTAT register + */ +/*@{*/ +#define HW_USB_ISTAT_ADDR(x) ((x) + 0x80U) + +#define HW_USB_ISTAT(x) (*(__IO hw_usb_istat_t *) HW_USB_ISTAT_ADDR(x)) +#define HW_USB_ISTAT_RD(x) (HW_USB_ISTAT(x).U) +#define HW_USB_ISTAT_WR(x, v) (HW_USB_ISTAT(x).U = (v)) +#define HW_USB_ISTAT_SET(x, v) (HW_USB_ISTAT_WR(x, HW_USB_ISTAT_RD(x) | (v))) +#define HW_USB_ISTAT_CLR(x, v) (HW_USB_ISTAT_WR(x, HW_USB_ISTAT_RD(x) & ~(v))) +#define HW_USB_ISTAT_TOG(x, v) (HW_USB_ISTAT_WR(x, HW_USB_ISTAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_ISTAT bitfields + */ + +/*! + * @name Register USB_ISTAT, field USBRST[0] (W1C) + * + * This bit is set when the USB Module has decoded a valid USB reset. This + * informs the processor that it should write 0x00 into the address register and + * enable endpoint 0. USBRST is set after a USB reset has been detected for 2.5 + * microseconds. It is not asserted again until the USB reset condition has been + * removed and then reasserted. + */ +/*@{*/ +#define BP_USB_ISTAT_USBRST (0U) /*!< Bit position for USB_ISTAT_USBRST. */ +#define BM_USB_ISTAT_USBRST (0x01U) /*!< Bit mask for USB_ISTAT_USBRST. */ +#define BS_USB_ISTAT_USBRST (1U) /*!< Bit field size in bits for USB_ISTAT_USBRST. */ + +/*! @brief Read current value of the USB_ISTAT_USBRST field. */ +#define BR_USB_ISTAT_USBRST(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_USBRST)) + +/*! @brief Format value for bitfield USB_ISTAT_USBRST. */ +#define BF_USB_ISTAT_USBRST(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_USBRST) & BM_USB_ISTAT_USBRST) + +/*! @brief Set the USBRST field to a new value. */ +#define BW_USB_ISTAT_USBRST(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_USBRST) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field ERROR[1] (W1C) + * + * This bit is set when any of the error conditions within Error Interrupt + * Status (ERRSTAT) register occur. The processor must then read the ERRSTAT register + * to determine the source of the error. + */ +/*@{*/ +#define BP_USB_ISTAT_ERROR (1U) /*!< Bit position for USB_ISTAT_ERROR. */ +#define BM_USB_ISTAT_ERROR (0x02U) /*!< Bit mask for USB_ISTAT_ERROR. */ +#define BS_USB_ISTAT_ERROR (1U) /*!< Bit field size in bits for USB_ISTAT_ERROR. */ + +/*! @brief Read current value of the USB_ISTAT_ERROR field. */ +#define BR_USB_ISTAT_ERROR(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_ERROR)) + +/*! @brief Format value for bitfield USB_ISTAT_ERROR. */ +#define BF_USB_ISTAT_ERROR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_ERROR) & BM_USB_ISTAT_ERROR) + +/*! @brief Set the ERROR field to a new value. */ +#define BW_USB_ISTAT_ERROR(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_ERROR) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field SOFTOK[2] (W1C) + * + * This bit is set when the USB Module receives a Start Of Frame (SOF) token. In + * Host mode this field is set when the SOF threshold is reached, so that + * software can prepare for the next SOF. + */ +/*@{*/ +#define BP_USB_ISTAT_SOFTOK (2U) /*!< Bit position for USB_ISTAT_SOFTOK. */ +#define BM_USB_ISTAT_SOFTOK (0x04U) /*!< Bit mask for USB_ISTAT_SOFTOK. */ +#define BS_USB_ISTAT_SOFTOK (1U) /*!< Bit field size in bits for USB_ISTAT_SOFTOK. */ + +/*! @brief Read current value of the USB_ISTAT_SOFTOK field. */ +#define BR_USB_ISTAT_SOFTOK(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_SOFTOK)) + +/*! @brief Format value for bitfield USB_ISTAT_SOFTOK. */ +#define BF_USB_ISTAT_SOFTOK(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_SOFTOK) & BM_USB_ISTAT_SOFTOK) + +/*! @brief Set the SOFTOK field to a new value. */ +#define BW_USB_ISTAT_SOFTOK(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_SOFTOK) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field TOKDNE[3] (W1C) + * + * This bit is set when the current token being processed has completed. The + * processor must immediately read the STATUS (STAT) register to determine the + * EndPoint and BD used for this token. Clearing this bit (by writing a one) causes + * STAT to be cleared or the STAT holding register to be loaded into the STAT + * register. + */ +/*@{*/ +#define BP_USB_ISTAT_TOKDNE (3U) /*!< Bit position for USB_ISTAT_TOKDNE. */ +#define BM_USB_ISTAT_TOKDNE (0x08U) /*!< Bit mask for USB_ISTAT_TOKDNE. */ +#define BS_USB_ISTAT_TOKDNE (1U) /*!< Bit field size in bits for USB_ISTAT_TOKDNE. */ + +/*! @brief Read current value of the USB_ISTAT_TOKDNE field. */ +#define BR_USB_ISTAT_TOKDNE(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_TOKDNE)) + +/*! @brief Format value for bitfield USB_ISTAT_TOKDNE. */ +#define BF_USB_ISTAT_TOKDNE(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_TOKDNE) & BM_USB_ISTAT_TOKDNE) + +/*! @brief Set the TOKDNE field to a new value. */ +#define BW_USB_ISTAT_TOKDNE(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_TOKDNE) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field SLEEP[4] (W1C) + * + * This bit is set when the USB Module detects a constant idle on the USB bus + * for 3 ms. The sleep timer is reset by activity on the USB bus. + */ +/*@{*/ +#define BP_USB_ISTAT_SLEEP (4U) /*!< Bit position for USB_ISTAT_SLEEP. */ +#define BM_USB_ISTAT_SLEEP (0x10U) /*!< Bit mask for USB_ISTAT_SLEEP. */ +#define BS_USB_ISTAT_SLEEP (1U) /*!< Bit field size in bits for USB_ISTAT_SLEEP. */ + +/*! @brief Read current value of the USB_ISTAT_SLEEP field. */ +#define BR_USB_ISTAT_SLEEP(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_SLEEP)) + +/*! @brief Format value for bitfield USB_ISTAT_SLEEP. */ +#define BF_USB_ISTAT_SLEEP(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_SLEEP) & BM_USB_ISTAT_SLEEP) + +/*! @brief Set the SLEEP field to a new value. */ +#define BW_USB_ISTAT_SLEEP(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_SLEEP) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field RESUME[5] (W1C) + * + * This bit is set when a K-state is observed on the DP/DM signals for 2.5 us. + * When not in suspend mode this interrupt must be disabled. + */ +/*@{*/ +#define BP_USB_ISTAT_RESUME (5U) /*!< Bit position for USB_ISTAT_RESUME. */ +#define BM_USB_ISTAT_RESUME (0x20U) /*!< Bit mask for USB_ISTAT_RESUME. */ +#define BS_USB_ISTAT_RESUME (1U) /*!< Bit field size in bits for USB_ISTAT_RESUME. */ + +/*! @brief Read current value of the USB_ISTAT_RESUME field. */ +#define BR_USB_ISTAT_RESUME(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_RESUME)) + +/*! @brief Format value for bitfield USB_ISTAT_RESUME. */ +#define BF_USB_ISTAT_RESUME(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_RESUME) & BM_USB_ISTAT_RESUME) + +/*! @brief Set the RESUME field to a new value. */ +#define BW_USB_ISTAT_RESUME(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_RESUME) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field ATTACH[6] (W1C) + * + * This bit is set when the USB Module detects an attach of a USB device. This + * signal is only valid if HOSTMODEEN is true. This interrupt signifies that a + * peripheral is now present and must be configured; it is asserted if there have + * been no transitions on the USB for 2.5 us and the current bus state is not SE0." + */ +/*@{*/ +#define BP_USB_ISTAT_ATTACH (6U) /*!< Bit position for USB_ISTAT_ATTACH. */ +#define BM_USB_ISTAT_ATTACH (0x40U) /*!< Bit mask for USB_ISTAT_ATTACH. */ +#define BS_USB_ISTAT_ATTACH (1U) /*!< Bit field size in bits for USB_ISTAT_ATTACH. */ + +/*! @brief Read current value of the USB_ISTAT_ATTACH field. */ +#define BR_USB_ISTAT_ATTACH(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_ATTACH)) + +/*! @brief Format value for bitfield USB_ISTAT_ATTACH. */ +#define BF_USB_ISTAT_ATTACH(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_ATTACH) & BM_USB_ISTAT_ATTACH) + +/*! @brief Set the ATTACH field to a new value. */ +#define BW_USB_ISTAT_ATTACH(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_ATTACH) = (v)) +/*@}*/ + +/*! + * @name Register USB_ISTAT, field STALL[7] (W1C) + * + * In Target mode this bit is asserted when a STALL handshake is sent by the + * SIE. In Host mode this bit is set when the USB Module detects a STALL acknowledge + * during the handshake phase of a USB transaction.This interrupt can be used to + * determine whether the last USB transaction was completed successfully or + * stalled. + */ +/*@{*/ +#define BP_USB_ISTAT_STALL (7U) /*!< Bit position for USB_ISTAT_STALL. */ +#define BM_USB_ISTAT_STALL (0x80U) /*!< Bit mask for USB_ISTAT_STALL. */ +#define BS_USB_ISTAT_STALL (1U) /*!< Bit field size in bits for USB_ISTAT_STALL. */ + +/*! @brief Read current value of the USB_ISTAT_STALL field. */ +#define BR_USB_ISTAT_STALL(x) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_STALL)) + +/*! @brief Format value for bitfield USB_ISTAT_STALL. */ +#define BF_USB_ISTAT_STALL(v) ((uint8_t)((uint8_t)(v) << BP_USB_ISTAT_STALL) & BM_USB_ISTAT_STALL) + +/*! @brief Set the STALL field to a new value. */ +#define BW_USB_ISTAT_STALL(x, v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR(x), BP_USB_ISTAT_STALL) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_INTEN - Interrupt Enable register + ******************************************************************************/ + +/*! + * @brief HW_USB_INTEN - Interrupt Enable register (RW) + * + * Reset value: 0x00U + * + * Contains enable fields for each of the interrupt sources within the USB + * Module. Setting any of these bits enables the respective interrupt source in the + * ISTAT register. This register contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_inten +{ + uint8_t U; + struct _hw_usb_inten_bitfields + { + uint8_t USBRSTEN : 1; /*!< [0] USBRST Interrupt Enable */ + uint8_t ERROREN : 1; /*!< [1] ERROR Interrupt Enable */ + uint8_t SOFTOKEN : 1; /*!< [2] SOFTOK Interrupt Enable */ + uint8_t TOKDNEEN : 1; /*!< [3] TOKDNE Interrupt Enable */ + uint8_t SLEEPEN : 1; /*!< [4] SLEEP Interrupt Enable */ + uint8_t RESUMEEN : 1; /*!< [5] RESUME Interrupt Enable */ + uint8_t ATTACHEN : 1; /*!< [6] ATTACH Interrupt Enable */ + uint8_t STALLEN : 1; /*!< [7] STALL Interrupt Enable */ + } B; +} hw_usb_inten_t; + +/*! + * @name Constants and macros for entire USB_INTEN register + */ +/*@{*/ +#define HW_USB_INTEN_ADDR(x) ((x) + 0x84U) + +#define HW_USB_INTEN(x) (*(__IO hw_usb_inten_t *) HW_USB_INTEN_ADDR(x)) +#define HW_USB_INTEN_RD(x) (HW_USB_INTEN(x).U) +#define HW_USB_INTEN_WR(x, v) (HW_USB_INTEN(x).U = (v)) +#define HW_USB_INTEN_SET(x, v) (HW_USB_INTEN_WR(x, HW_USB_INTEN_RD(x) | (v))) +#define HW_USB_INTEN_CLR(x, v) (HW_USB_INTEN_WR(x, HW_USB_INTEN_RD(x) & ~(v))) +#define HW_USB_INTEN_TOG(x, v) (HW_USB_INTEN_WR(x, HW_USB_INTEN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_INTEN bitfields + */ + +/*! + * @name Register USB_INTEN, field USBRSTEN[0] (RW) + * + * Values: + * - 0 - Disables the USBRST interrupt. + * - 1 - Enables the USBRST interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_USBRSTEN (0U) /*!< Bit position for USB_INTEN_USBRSTEN. */ +#define BM_USB_INTEN_USBRSTEN (0x01U) /*!< Bit mask for USB_INTEN_USBRSTEN. */ +#define BS_USB_INTEN_USBRSTEN (1U) /*!< Bit field size in bits for USB_INTEN_USBRSTEN. */ + +/*! @brief Read current value of the USB_INTEN_USBRSTEN field. */ +#define BR_USB_INTEN_USBRSTEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_USBRSTEN)) + +/*! @brief Format value for bitfield USB_INTEN_USBRSTEN. */ +#define BF_USB_INTEN_USBRSTEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_USBRSTEN) & BM_USB_INTEN_USBRSTEN) + +/*! @brief Set the USBRSTEN field to a new value. */ +#define BW_USB_INTEN_USBRSTEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_USBRSTEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field ERROREN[1] (RW) + * + * Values: + * - 0 - Disables the ERROR interrupt. + * - 1 - Enables the ERROR interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_ERROREN (1U) /*!< Bit position for USB_INTEN_ERROREN. */ +#define BM_USB_INTEN_ERROREN (0x02U) /*!< Bit mask for USB_INTEN_ERROREN. */ +#define BS_USB_INTEN_ERROREN (1U) /*!< Bit field size in bits for USB_INTEN_ERROREN. */ + +/*! @brief Read current value of the USB_INTEN_ERROREN field. */ +#define BR_USB_INTEN_ERROREN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_ERROREN)) + +/*! @brief Format value for bitfield USB_INTEN_ERROREN. */ +#define BF_USB_INTEN_ERROREN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_ERROREN) & BM_USB_INTEN_ERROREN) + +/*! @brief Set the ERROREN field to a new value. */ +#define BW_USB_INTEN_ERROREN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_ERROREN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field SOFTOKEN[2] (RW) + * + * Values: + * - 0 - Disbles the SOFTOK interrupt. + * - 1 - Enables the SOFTOK interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_SOFTOKEN (2U) /*!< Bit position for USB_INTEN_SOFTOKEN. */ +#define BM_USB_INTEN_SOFTOKEN (0x04U) /*!< Bit mask for USB_INTEN_SOFTOKEN. */ +#define BS_USB_INTEN_SOFTOKEN (1U) /*!< Bit field size in bits for USB_INTEN_SOFTOKEN. */ + +/*! @brief Read current value of the USB_INTEN_SOFTOKEN field. */ +#define BR_USB_INTEN_SOFTOKEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_SOFTOKEN)) + +/*! @brief Format value for bitfield USB_INTEN_SOFTOKEN. */ +#define BF_USB_INTEN_SOFTOKEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_SOFTOKEN) & BM_USB_INTEN_SOFTOKEN) + +/*! @brief Set the SOFTOKEN field to a new value. */ +#define BW_USB_INTEN_SOFTOKEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_SOFTOKEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field TOKDNEEN[3] (RW) + * + * Values: + * - 0 - Disables the TOKDNE interrupt. + * - 1 - Enables the TOKDNE interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_TOKDNEEN (3U) /*!< Bit position for USB_INTEN_TOKDNEEN. */ +#define BM_USB_INTEN_TOKDNEEN (0x08U) /*!< Bit mask for USB_INTEN_TOKDNEEN. */ +#define BS_USB_INTEN_TOKDNEEN (1U) /*!< Bit field size in bits for USB_INTEN_TOKDNEEN. */ + +/*! @brief Read current value of the USB_INTEN_TOKDNEEN field. */ +#define BR_USB_INTEN_TOKDNEEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_TOKDNEEN)) + +/*! @brief Format value for bitfield USB_INTEN_TOKDNEEN. */ +#define BF_USB_INTEN_TOKDNEEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_TOKDNEEN) & BM_USB_INTEN_TOKDNEEN) + +/*! @brief Set the TOKDNEEN field to a new value. */ +#define BW_USB_INTEN_TOKDNEEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_TOKDNEEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field SLEEPEN[4] (RW) + * + * Values: + * - 0 - Disables the SLEEP interrupt. + * - 1 - Enables the SLEEP interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_SLEEPEN (4U) /*!< Bit position for USB_INTEN_SLEEPEN. */ +#define BM_USB_INTEN_SLEEPEN (0x10U) /*!< Bit mask for USB_INTEN_SLEEPEN. */ +#define BS_USB_INTEN_SLEEPEN (1U) /*!< Bit field size in bits for USB_INTEN_SLEEPEN. */ + +/*! @brief Read current value of the USB_INTEN_SLEEPEN field. */ +#define BR_USB_INTEN_SLEEPEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_SLEEPEN)) + +/*! @brief Format value for bitfield USB_INTEN_SLEEPEN. */ +#define BF_USB_INTEN_SLEEPEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_SLEEPEN) & BM_USB_INTEN_SLEEPEN) + +/*! @brief Set the SLEEPEN field to a new value. */ +#define BW_USB_INTEN_SLEEPEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_SLEEPEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field RESUMEEN[5] (RW) + * + * Values: + * - 0 - Disables the RESUME interrupt. + * - 1 - Enables the RESUME interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_RESUMEEN (5U) /*!< Bit position for USB_INTEN_RESUMEEN. */ +#define BM_USB_INTEN_RESUMEEN (0x20U) /*!< Bit mask for USB_INTEN_RESUMEEN. */ +#define BS_USB_INTEN_RESUMEEN (1U) /*!< Bit field size in bits for USB_INTEN_RESUMEEN. */ + +/*! @brief Read current value of the USB_INTEN_RESUMEEN field. */ +#define BR_USB_INTEN_RESUMEEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_RESUMEEN)) + +/*! @brief Format value for bitfield USB_INTEN_RESUMEEN. */ +#define BF_USB_INTEN_RESUMEEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_RESUMEEN) & BM_USB_INTEN_RESUMEEN) + +/*! @brief Set the RESUMEEN field to a new value. */ +#define BW_USB_INTEN_RESUMEEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_RESUMEEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field ATTACHEN[6] (RW) + * + * Values: + * - 0 - Disables the ATTACH interrupt. + * - 1 - Enables the ATTACH interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_ATTACHEN (6U) /*!< Bit position for USB_INTEN_ATTACHEN. */ +#define BM_USB_INTEN_ATTACHEN (0x40U) /*!< Bit mask for USB_INTEN_ATTACHEN. */ +#define BS_USB_INTEN_ATTACHEN (1U) /*!< Bit field size in bits for USB_INTEN_ATTACHEN. */ + +/*! @brief Read current value of the USB_INTEN_ATTACHEN field. */ +#define BR_USB_INTEN_ATTACHEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_ATTACHEN)) + +/*! @brief Format value for bitfield USB_INTEN_ATTACHEN. */ +#define BF_USB_INTEN_ATTACHEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_ATTACHEN) & BM_USB_INTEN_ATTACHEN) + +/*! @brief Set the ATTACHEN field to a new value. */ +#define BW_USB_INTEN_ATTACHEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_ATTACHEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_INTEN, field STALLEN[7] (RW) + * + * Values: + * - 0 - Diasbles the STALL interrupt. + * - 1 - Enables the STALL interrupt. + */ +/*@{*/ +#define BP_USB_INTEN_STALLEN (7U) /*!< Bit position for USB_INTEN_STALLEN. */ +#define BM_USB_INTEN_STALLEN (0x80U) /*!< Bit mask for USB_INTEN_STALLEN. */ +#define BS_USB_INTEN_STALLEN (1U) /*!< Bit field size in bits for USB_INTEN_STALLEN. */ + +/*! @brief Read current value of the USB_INTEN_STALLEN field. */ +#define BR_USB_INTEN_STALLEN(x) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_STALLEN)) + +/*! @brief Format value for bitfield USB_INTEN_STALLEN. */ +#define BF_USB_INTEN_STALLEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_INTEN_STALLEN) & BM_USB_INTEN_STALLEN) + +/*! @brief Set the STALLEN field to a new value. */ +#define BW_USB_INTEN_STALLEN(x, v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR(x), BP_USB_INTEN_STALLEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_ERRSTAT - Error Interrupt Status register + ******************************************************************************/ + +/*! + * @brief HW_USB_ERRSTAT - Error Interrupt Status register (RW) + * + * Reset value: 0x00U + * + * Contains enable bits for each of the error sources within the USB Module. + * Each of these bits are qualified with their respective error enable bits. All + * bits of this register are logically OR'd together and the result placed in the + * ERROR bit of the ISTAT register. After an interrupt bit has been set it may only + * be cleared by writing a one to the respective interrupt bit. Each bit is set + * as soon as the error condition is detected. Therefore, the interrupt does not + * typically correspond with the end of a token being processed. This register + * contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_errstat +{ + uint8_t U; + struct _hw_usb_errstat_bitfields + { + uint8_t PIDERR : 1; /*!< [0] */ + uint8_t CRC5EOF : 1; /*!< [1] */ + uint8_t CRC16 : 1; /*!< [2] */ + uint8_t DFN8 : 1; /*!< [3] */ + uint8_t BTOERR : 1; /*!< [4] */ + uint8_t DMAERR : 1; /*!< [5] */ + uint8_t RESERVED0 : 1; /*!< [6] */ + uint8_t BTSERR : 1; /*!< [7] */ + } B; +} hw_usb_errstat_t; + +/*! + * @name Constants and macros for entire USB_ERRSTAT register + */ +/*@{*/ +#define HW_USB_ERRSTAT_ADDR(x) ((x) + 0x88U) + +#define HW_USB_ERRSTAT(x) (*(__IO hw_usb_errstat_t *) HW_USB_ERRSTAT_ADDR(x)) +#define HW_USB_ERRSTAT_RD(x) (HW_USB_ERRSTAT(x).U) +#define HW_USB_ERRSTAT_WR(x, v) (HW_USB_ERRSTAT(x).U = (v)) +#define HW_USB_ERRSTAT_SET(x, v) (HW_USB_ERRSTAT_WR(x, HW_USB_ERRSTAT_RD(x) | (v))) +#define HW_USB_ERRSTAT_CLR(x, v) (HW_USB_ERRSTAT_WR(x, HW_USB_ERRSTAT_RD(x) & ~(v))) +#define HW_USB_ERRSTAT_TOG(x, v) (HW_USB_ERRSTAT_WR(x, HW_USB_ERRSTAT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_ERRSTAT bitfields + */ + +/*! + * @name Register USB_ERRSTAT, field PIDERR[0] (W1C) + * + * This bit is set when the PID check field fails. + */ +/*@{*/ +#define BP_USB_ERRSTAT_PIDERR (0U) /*!< Bit position for USB_ERRSTAT_PIDERR. */ +#define BM_USB_ERRSTAT_PIDERR (0x01U) /*!< Bit mask for USB_ERRSTAT_PIDERR. */ +#define BS_USB_ERRSTAT_PIDERR (1U) /*!< Bit field size in bits for USB_ERRSTAT_PIDERR. */ + +/*! @brief Read current value of the USB_ERRSTAT_PIDERR field. */ +#define BR_USB_ERRSTAT_PIDERR(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_PIDERR)) + +/*! @brief Format value for bitfield USB_ERRSTAT_PIDERR. */ +#define BF_USB_ERRSTAT_PIDERR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_PIDERR) & BM_USB_ERRSTAT_PIDERR) + +/*! @brief Set the PIDERR field to a new value. */ +#define BW_USB_ERRSTAT_PIDERR(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_PIDERR) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field CRC5EOF[1] (W1C) + * + * This error interrupt has two functions. When the USB Module is operating in + * peripheral mode (HOSTMODEEN=0), this interrupt detects CRC5 errors in the token + * packets generated by the host. If set the token packet was rejected due to a + * CRC5 error. When the USB Module is operating in host mode (HOSTMODEEN=1), this + * interrupt detects End Of Frame (EOF) error conditions. This occurs when the + * USB Module is transmitting or receiving data and the SOF counter reaches zero. + * This interrupt is useful when developing USB packet scheduling software to + * ensure that no USB transactions cross the start of the next frame. + */ +/*@{*/ +#define BP_USB_ERRSTAT_CRC5EOF (1U) /*!< Bit position for USB_ERRSTAT_CRC5EOF. */ +#define BM_USB_ERRSTAT_CRC5EOF (0x02U) /*!< Bit mask for USB_ERRSTAT_CRC5EOF. */ +#define BS_USB_ERRSTAT_CRC5EOF (1U) /*!< Bit field size in bits for USB_ERRSTAT_CRC5EOF. */ + +/*! @brief Read current value of the USB_ERRSTAT_CRC5EOF field. */ +#define BR_USB_ERRSTAT_CRC5EOF(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_CRC5EOF)) + +/*! @brief Format value for bitfield USB_ERRSTAT_CRC5EOF. */ +#define BF_USB_ERRSTAT_CRC5EOF(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_CRC5EOF) & BM_USB_ERRSTAT_CRC5EOF) + +/*! @brief Set the CRC5EOF field to a new value. */ +#define BW_USB_ERRSTAT_CRC5EOF(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_CRC5EOF) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field CRC16[2] (W1C) + * + * This bit is set when a data packet is rejected due to a CRC16 error. + */ +/*@{*/ +#define BP_USB_ERRSTAT_CRC16 (2U) /*!< Bit position for USB_ERRSTAT_CRC16. */ +#define BM_USB_ERRSTAT_CRC16 (0x04U) /*!< Bit mask for USB_ERRSTAT_CRC16. */ +#define BS_USB_ERRSTAT_CRC16 (1U) /*!< Bit field size in bits for USB_ERRSTAT_CRC16. */ + +/*! @brief Read current value of the USB_ERRSTAT_CRC16 field. */ +#define BR_USB_ERRSTAT_CRC16(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_CRC16)) + +/*! @brief Format value for bitfield USB_ERRSTAT_CRC16. */ +#define BF_USB_ERRSTAT_CRC16(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_CRC16) & BM_USB_ERRSTAT_CRC16) + +/*! @brief Set the CRC16 field to a new value. */ +#define BW_USB_ERRSTAT_CRC16(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_CRC16) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field DFN8[3] (W1C) + * + * This bit is set if the data field received was not 8 bits in length. USB + * Specification 1.0 requires that data fields be an integral number of bytes. If the + * data field was not an integral number of bytes, this bit is set. + */ +/*@{*/ +#define BP_USB_ERRSTAT_DFN8 (3U) /*!< Bit position for USB_ERRSTAT_DFN8. */ +#define BM_USB_ERRSTAT_DFN8 (0x08U) /*!< Bit mask for USB_ERRSTAT_DFN8. */ +#define BS_USB_ERRSTAT_DFN8 (1U) /*!< Bit field size in bits for USB_ERRSTAT_DFN8. */ + +/*! @brief Read current value of the USB_ERRSTAT_DFN8 field. */ +#define BR_USB_ERRSTAT_DFN8(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_DFN8)) + +/*! @brief Format value for bitfield USB_ERRSTAT_DFN8. */ +#define BF_USB_ERRSTAT_DFN8(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_DFN8) & BM_USB_ERRSTAT_DFN8) + +/*! @brief Set the DFN8 field to a new value. */ +#define BW_USB_ERRSTAT_DFN8(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_DFN8) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field BTOERR[4] (W1C) + * + * This bit is set when a bus turnaround timeout error occurs. The USB module + * contains a bus turnaround timer that keeps track of the amount of time elapsed + * between the token and data phases of a SETUP or OUT TOKEN or the data and + * handshake phases of a IN TOKEN. If more than 16 bit times are counted from the + * previous EOP before a transition from IDLE, a bus turnaround timeout error occurs. + */ +/*@{*/ +#define BP_USB_ERRSTAT_BTOERR (4U) /*!< Bit position for USB_ERRSTAT_BTOERR. */ +#define BM_USB_ERRSTAT_BTOERR (0x10U) /*!< Bit mask for USB_ERRSTAT_BTOERR. */ +#define BS_USB_ERRSTAT_BTOERR (1U) /*!< Bit field size in bits for USB_ERRSTAT_BTOERR. */ + +/*! @brief Read current value of the USB_ERRSTAT_BTOERR field. */ +#define BR_USB_ERRSTAT_BTOERR(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_BTOERR)) + +/*! @brief Format value for bitfield USB_ERRSTAT_BTOERR. */ +#define BF_USB_ERRSTAT_BTOERR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_BTOERR) & BM_USB_ERRSTAT_BTOERR) + +/*! @brief Set the BTOERR field to a new value. */ +#define BW_USB_ERRSTAT_BTOERR(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_BTOERR) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field DMAERR[5] (W1C) + * + * This bit is set if the USB Module has requested a DMA access to read a new + * BDT but has not been given the bus before it needs to receive or transmit data. + * If processing a TX transfer this would cause a transmit data underflow + * condition. If processing a RX transfer this would cause a receive data overflow + * condition. This interrupt is useful when developing device arbitration hardware for + * the microprocessor and the USB module to minimize bus request and bus grant + * latency. This bit is also set if a data packet to or from the host is larger + * than the buffer size allocated in the BDT. In this case the data packet is + * truncated as it is put in buffer memory. + */ +/*@{*/ +#define BP_USB_ERRSTAT_DMAERR (5U) /*!< Bit position for USB_ERRSTAT_DMAERR. */ +#define BM_USB_ERRSTAT_DMAERR (0x20U) /*!< Bit mask for USB_ERRSTAT_DMAERR. */ +#define BS_USB_ERRSTAT_DMAERR (1U) /*!< Bit field size in bits for USB_ERRSTAT_DMAERR. */ + +/*! @brief Read current value of the USB_ERRSTAT_DMAERR field. */ +#define BR_USB_ERRSTAT_DMAERR(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_DMAERR)) + +/*! @brief Format value for bitfield USB_ERRSTAT_DMAERR. */ +#define BF_USB_ERRSTAT_DMAERR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_DMAERR) & BM_USB_ERRSTAT_DMAERR) + +/*! @brief Set the DMAERR field to a new value. */ +#define BW_USB_ERRSTAT_DMAERR(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_DMAERR) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERRSTAT, field BTSERR[7] (W1C) + * + * This bit is set when a bit stuff error is detected. If set, the corresponding + * packet is rejected due to the error. + */ +/*@{*/ +#define BP_USB_ERRSTAT_BTSERR (7U) /*!< Bit position for USB_ERRSTAT_BTSERR. */ +#define BM_USB_ERRSTAT_BTSERR (0x80U) /*!< Bit mask for USB_ERRSTAT_BTSERR. */ +#define BS_USB_ERRSTAT_BTSERR (1U) /*!< Bit field size in bits for USB_ERRSTAT_BTSERR. */ + +/*! @brief Read current value of the USB_ERRSTAT_BTSERR field. */ +#define BR_USB_ERRSTAT_BTSERR(x) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_BTSERR)) + +/*! @brief Format value for bitfield USB_ERRSTAT_BTSERR. */ +#define BF_USB_ERRSTAT_BTSERR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERRSTAT_BTSERR) & BM_USB_ERRSTAT_BTSERR) + +/*! @brief Set the BTSERR field to a new value. */ +#define BW_USB_ERRSTAT_BTSERR(x, v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR(x), BP_USB_ERRSTAT_BTSERR) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_ERREN - Error Interrupt Enable register + ******************************************************************************/ + +/*! + * @brief HW_USB_ERREN - Error Interrupt Enable register (RW) + * + * Reset value: 0x00U + * + * Contains enable bits for each of the error interrupt sources within the USB + * module. Setting any of these bits enables the respective interrupt source in + * ERRSTAT. Each bit is set as soon as the error condition is detected. Therefore, + * the interrupt does not typically correspond with the end of a token being + * processed. This register contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_erren +{ + uint8_t U; + struct _hw_usb_erren_bitfields + { + uint8_t PIDERREN : 1; /*!< [0] PIDERR Interrupt Enable */ + uint8_t CRC5EOFEN : 1; /*!< [1] CRC5/EOF Interrupt Enable */ + uint8_t CRC16EN : 1; /*!< [2] CRC16 Interrupt Enable */ + uint8_t DFN8EN : 1; /*!< [3] DFN8 Interrupt Enable */ + uint8_t BTOERREN : 1; /*!< [4] BTOERR Interrupt Enable */ + uint8_t DMAERREN : 1; /*!< [5] DMAERR Interrupt Enable */ + uint8_t RESERVED0 : 1; /*!< [6] */ + uint8_t BTSERREN : 1; /*!< [7] BTSERR Interrupt Enable */ + } B; +} hw_usb_erren_t; + +/*! + * @name Constants and macros for entire USB_ERREN register + */ +/*@{*/ +#define HW_USB_ERREN_ADDR(x) ((x) + 0x8CU) + +#define HW_USB_ERREN(x) (*(__IO hw_usb_erren_t *) HW_USB_ERREN_ADDR(x)) +#define HW_USB_ERREN_RD(x) (HW_USB_ERREN(x).U) +#define HW_USB_ERREN_WR(x, v) (HW_USB_ERREN(x).U = (v)) +#define HW_USB_ERREN_SET(x, v) (HW_USB_ERREN_WR(x, HW_USB_ERREN_RD(x) | (v))) +#define HW_USB_ERREN_CLR(x, v) (HW_USB_ERREN_WR(x, HW_USB_ERREN_RD(x) & ~(v))) +#define HW_USB_ERREN_TOG(x, v) (HW_USB_ERREN_WR(x, HW_USB_ERREN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_ERREN bitfields + */ + +/*! + * @name Register USB_ERREN, field PIDERREN[0] (RW) + * + * Values: + * - 0 - Disables the PIDERR interrupt. + * - 1 - Enters the PIDERR interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_PIDERREN (0U) /*!< Bit position for USB_ERREN_PIDERREN. */ +#define BM_USB_ERREN_PIDERREN (0x01U) /*!< Bit mask for USB_ERREN_PIDERREN. */ +#define BS_USB_ERREN_PIDERREN (1U) /*!< Bit field size in bits for USB_ERREN_PIDERREN. */ + +/*! @brief Read current value of the USB_ERREN_PIDERREN field. */ +#define BR_USB_ERREN_PIDERREN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_PIDERREN)) + +/*! @brief Format value for bitfield USB_ERREN_PIDERREN. */ +#define BF_USB_ERREN_PIDERREN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_PIDERREN) & BM_USB_ERREN_PIDERREN) + +/*! @brief Set the PIDERREN field to a new value. */ +#define BW_USB_ERREN_PIDERREN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_PIDERREN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field CRC5EOFEN[1] (RW) + * + * Values: + * - 0 - Disables the CRC5/EOF interrupt. + * - 1 - Enables the CRC5/EOF interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_CRC5EOFEN (1U) /*!< Bit position for USB_ERREN_CRC5EOFEN. */ +#define BM_USB_ERREN_CRC5EOFEN (0x02U) /*!< Bit mask for USB_ERREN_CRC5EOFEN. */ +#define BS_USB_ERREN_CRC5EOFEN (1U) /*!< Bit field size in bits for USB_ERREN_CRC5EOFEN. */ + +/*! @brief Read current value of the USB_ERREN_CRC5EOFEN field. */ +#define BR_USB_ERREN_CRC5EOFEN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_CRC5EOFEN)) + +/*! @brief Format value for bitfield USB_ERREN_CRC5EOFEN. */ +#define BF_USB_ERREN_CRC5EOFEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_CRC5EOFEN) & BM_USB_ERREN_CRC5EOFEN) + +/*! @brief Set the CRC5EOFEN field to a new value. */ +#define BW_USB_ERREN_CRC5EOFEN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_CRC5EOFEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field CRC16EN[2] (RW) + * + * Values: + * - 0 - Disables the CRC16 interrupt. + * - 1 - Enables the CRC16 interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_CRC16EN (2U) /*!< Bit position for USB_ERREN_CRC16EN. */ +#define BM_USB_ERREN_CRC16EN (0x04U) /*!< Bit mask for USB_ERREN_CRC16EN. */ +#define BS_USB_ERREN_CRC16EN (1U) /*!< Bit field size in bits for USB_ERREN_CRC16EN. */ + +/*! @brief Read current value of the USB_ERREN_CRC16EN field. */ +#define BR_USB_ERREN_CRC16EN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_CRC16EN)) + +/*! @brief Format value for bitfield USB_ERREN_CRC16EN. */ +#define BF_USB_ERREN_CRC16EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_CRC16EN) & BM_USB_ERREN_CRC16EN) + +/*! @brief Set the CRC16EN field to a new value. */ +#define BW_USB_ERREN_CRC16EN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_CRC16EN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field DFN8EN[3] (RW) + * + * Values: + * - 0 - Disables the DFN8 interrupt. + * - 1 - Enables the DFN8 interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_DFN8EN (3U) /*!< Bit position for USB_ERREN_DFN8EN. */ +#define BM_USB_ERREN_DFN8EN (0x08U) /*!< Bit mask for USB_ERREN_DFN8EN. */ +#define BS_USB_ERREN_DFN8EN (1U) /*!< Bit field size in bits for USB_ERREN_DFN8EN. */ + +/*! @brief Read current value of the USB_ERREN_DFN8EN field. */ +#define BR_USB_ERREN_DFN8EN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_DFN8EN)) + +/*! @brief Format value for bitfield USB_ERREN_DFN8EN. */ +#define BF_USB_ERREN_DFN8EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_DFN8EN) & BM_USB_ERREN_DFN8EN) + +/*! @brief Set the DFN8EN field to a new value. */ +#define BW_USB_ERREN_DFN8EN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_DFN8EN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field BTOERREN[4] (RW) + * + * Values: + * - 0 - Disables the BTOERR interrupt. + * - 1 - Enables the BTOERR interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_BTOERREN (4U) /*!< Bit position for USB_ERREN_BTOERREN. */ +#define BM_USB_ERREN_BTOERREN (0x10U) /*!< Bit mask for USB_ERREN_BTOERREN. */ +#define BS_USB_ERREN_BTOERREN (1U) /*!< Bit field size in bits for USB_ERREN_BTOERREN. */ + +/*! @brief Read current value of the USB_ERREN_BTOERREN field. */ +#define BR_USB_ERREN_BTOERREN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_BTOERREN)) + +/*! @brief Format value for bitfield USB_ERREN_BTOERREN. */ +#define BF_USB_ERREN_BTOERREN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_BTOERREN) & BM_USB_ERREN_BTOERREN) + +/*! @brief Set the BTOERREN field to a new value. */ +#define BW_USB_ERREN_BTOERREN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_BTOERREN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field DMAERREN[5] (RW) + * + * Values: + * - 0 - Disables the DMAERR interrupt. + * - 1 - Enables the DMAERR interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_DMAERREN (5U) /*!< Bit position for USB_ERREN_DMAERREN. */ +#define BM_USB_ERREN_DMAERREN (0x20U) /*!< Bit mask for USB_ERREN_DMAERREN. */ +#define BS_USB_ERREN_DMAERREN (1U) /*!< Bit field size in bits for USB_ERREN_DMAERREN. */ + +/*! @brief Read current value of the USB_ERREN_DMAERREN field. */ +#define BR_USB_ERREN_DMAERREN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_DMAERREN)) + +/*! @brief Format value for bitfield USB_ERREN_DMAERREN. */ +#define BF_USB_ERREN_DMAERREN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_DMAERREN) & BM_USB_ERREN_DMAERREN) + +/*! @brief Set the DMAERREN field to a new value. */ +#define BW_USB_ERREN_DMAERREN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_DMAERREN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ERREN, field BTSERREN[7] (RW) + * + * Values: + * - 0 - Disables the BTSERR interrupt. + * - 1 - Enables the BTSERR interrupt. + */ +/*@{*/ +#define BP_USB_ERREN_BTSERREN (7U) /*!< Bit position for USB_ERREN_BTSERREN. */ +#define BM_USB_ERREN_BTSERREN (0x80U) /*!< Bit mask for USB_ERREN_BTSERREN. */ +#define BS_USB_ERREN_BTSERREN (1U) /*!< Bit field size in bits for USB_ERREN_BTSERREN. */ + +/*! @brief Read current value of the USB_ERREN_BTSERREN field. */ +#define BR_USB_ERREN_BTSERREN(x) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_BTSERREN)) + +/*! @brief Format value for bitfield USB_ERREN_BTSERREN. */ +#define BF_USB_ERREN_BTSERREN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ERREN_BTSERREN) & BM_USB_ERREN_BTSERREN) + +/*! @brief Set the BTSERREN field to a new value. */ +#define BW_USB_ERREN_BTSERREN(x, v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR(x), BP_USB_ERREN_BTSERREN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_STAT - Status register + ******************************************************************************/ + +/*! + * @brief HW_USB_STAT - Status register (RO) + * + * Reset value: 0x00U + * + * Reports the transaction status within the USB module. When the processor's + * interrupt controller has received a TOKDNE, interrupt the Status Register must + * be read to determine the status of the previous endpoint communication. The + * data in the status register is valid when TOKDNE interrupt is asserted. The + * Status register is actually a read window into a status FIFO maintained by the USB + * module. When the USB module uses a BD, it updates the Status register. If + * another USB transaction is performed before the TOKDNE interrupt is serviced, the + * USB module stores the status of the next transaction in the STAT FIFO. Thus + * STAT is actually a four byte FIFO that allows the processor core to process one + * transaction while the SIE is processing the next transaction. Clearing the + * TOKDNE bit in the ISTAT register causes the SIE to update STAT with the contents + * of the next STAT value. If the data in the STAT holding register is valid, the + * SIE immediately reasserts to TOKDNE interrupt. + */ +typedef union _hw_usb_stat +{ + uint8_t U; + struct _hw_usb_stat_bitfields + { + uint8_t RESERVED0 : 2; /*!< [1:0] */ + uint8_t ODD : 1; /*!< [2] */ + uint8_t TX : 1; /*!< [3] Transmit Indicator */ + uint8_t ENDP : 4; /*!< [7:4] */ + } B; +} hw_usb_stat_t; + +/*! + * @name Constants and macros for entire USB_STAT register + */ +/*@{*/ +#define HW_USB_STAT_ADDR(x) ((x) + 0x90U) + +#define HW_USB_STAT(x) (*(__I hw_usb_stat_t *) HW_USB_STAT_ADDR(x)) +#define HW_USB_STAT_RD(x) (HW_USB_STAT(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_STAT bitfields + */ + +/*! + * @name Register USB_STAT, field ODD[2] (RO) + * + * This bit is set if the last buffer descriptor updated was in the odd bank of + * the BDT. + */ +/*@{*/ +#define BP_USB_STAT_ODD (2U) /*!< Bit position for USB_STAT_ODD. */ +#define BM_USB_STAT_ODD (0x04U) /*!< Bit mask for USB_STAT_ODD. */ +#define BS_USB_STAT_ODD (1U) /*!< Bit field size in bits for USB_STAT_ODD. */ + +/*! @brief Read current value of the USB_STAT_ODD field. */ +#define BR_USB_STAT_ODD(x) (BITBAND_ACCESS8(HW_USB_STAT_ADDR(x), BP_USB_STAT_ODD)) +/*@}*/ + +/*! + * @name Register USB_STAT, field TX[3] (RO) + * + * Values: + * - 0 - The most recent transaction was a receive operation. + * - 1 - The most recent transaction was a transmit operation. + */ +/*@{*/ +#define BP_USB_STAT_TX (3U) /*!< Bit position for USB_STAT_TX. */ +#define BM_USB_STAT_TX (0x08U) /*!< Bit mask for USB_STAT_TX. */ +#define BS_USB_STAT_TX (1U) /*!< Bit field size in bits for USB_STAT_TX. */ + +/*! @brief Read current value of the USB_STAT_TX field. */ +#define BR_USB_STAT_TX(x) (BITBAND_ACCESS8(HW_USB_STAT_ADDR(x), BP_USB_STAT_TX)) +/*@}*/ + +/*! + * @name Register USB_STAT, field ENDP[7:4] (RO) + * + * This four-bit field encodes the endpoint address that received or transmitted + * the previous token. This allows the processor core to determine the BDT entry + * that was updated by the last USB transaction. + */ +/*@{*/ +#define BP_USB_STAT_ENDP (4U) /*!< Bit position for USB_STAT_ENDP. */ +#define BM_USB_STAT_ENDP (0xF0U) /*!< Bit mask for USB_STAT_ENDP. */ +#define BS_USB_STAT_ENDP (4U) /*!< Bit field size in bits for USB_STAT_ENDP. */ + +/*! @brief Read current value of the USB_STAT_ENDP field. */ +#define BR_USB_STAT_ENDP(x) (HW_USB_STAT(x).B.ENDP) +/*@}*/ + +/******************************************************************************* + * HW_USB_CTL - Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_CTL - Control register (RW) + * + * Reset value: 0x00U + * + * Provides various control and configuration information for the USB module. + */ +typedef union _hw_usb_ctl +{ + uint8_t U; + struct _hw_usb_ctl_bitfields + { + uint8_t USBENSOFEN : 1; /*!< [0] USB Enable */ + uint8_t ODDRST : 1; /*!< [1] */ + uint8_t RESUME : 1; /*!< [2] */ + uint8_t HOSTMODEEN : 1; /*!< [3] */ + uint8_t RESET : 1; /*!< [4] */ + uint8_t TXSUSPENDTOKENBUSY : 1; /*!< [5] */ + uint8_t SE0 : 1; /*!< [6] Live USB Single Ended Zero signal */ + uint8_t JSTATE : 1; /*!< [7] Live USB differential receiver JSTATE + * signal */ + } B; +} hw_usb_ctl_t; + +/*! + * @name Constants and macros for entire USB_CTL register + */ +/*@{*/ +#define HW_USB_CTL_ADDR(x) ((x) + 0x94U) + +#define HW_USB_CTL(x) (*(__IO hw_usb_ctl_t *) HW_USB_CTL_ADDR(x)) +#define HW_USB_CTL_RD(x) (HW_USB_CTL(x).U) +#define HW_USB_CTL_WR(x, v) (HW_USB_CTL(x).U = (v)) +#define HW_USB_CTL_SET(x, v) (HW_USB_CTL_WR(x, HW_USB_CTL_RD(x) | (v))) +#define HW_USB_CTL_CLR(x, v) (HW_USB_CTL_WR(x, HW_USB_CTL_RD(x) & ~(v))) +#define HW_USB_CTL_TOG(x, v) (HW_USB_CTL_WR(x, HW_USB_CTL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_CTL bitfields + */ + +/*! + * @name Register USB_CTL, field USBENSOFEN[0] (RW) + * + * Setting this bit enables the USB-FS to operate; clearing it disables the + * USB-FS. Setting the bit causes the SIE to reset all of its ODD bits to the BDTs. + * Therefore, setting this bit resets much of the logic in the SIE. When host mode + * is enabled, clearing this bit causes the SIE to stop sending SOF tokens. + * + * Values: + * - 0 - Disables the USB Module. + * - 1 - Enables the USB Module. + */ +/*@{*/ +#define BP_USB_CTL_USBENSOFEN (0U) /*!< Bit position for USB_CTL_USBENSOFEN. */ +#define BM_USB_CTL_USBENSOFEN (0x01U) /*!< Bit mask for USB_CTL_USBENSOFEN. */ +#define BS_USB_CTL_USBENSOFEN (1U) /*!< Bit field size in bits for USB_CTL_USBENSOFEN. */ + +/*! @brief Read current value of the USB_CTL_USBENSOFEN field. */ +#define BR_USB_CTL_USBENSOFEN(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_USBENSOFEN)) + +/*! @brief Format value for bitfield USB_CTL_USBENSOFEN. */ +#define BF_USB_CTL_USBENSOFEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_USBENSOFEN) & BM_USB_CTL_USBENSOFEN) + +/*! @brief Set the USBENSOFEN field to a new value. */ +#define BW_USB_CTL_USBENSOFEN(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_USBENSOFEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field ODDRST[1] (RW) + * + * Setting this bit to 1 resets all the BDT ODD ping/pong fields to 0, which + * then specifies the EVEN BDT bank. + */ +/*@{*/ +#define BP_USB_CTL_ODDRST (1U) /*!< Bit position for USB_CTL_ODDRST. */ +#define BM_USB_CTL_ODDRST (0x02U) /*!< Bit mask for USB_CTL_ODDRST. */ +#define BS_USB_CTL_ODDRST (1U) /*!< Bit field size in bits for USB_CTL_ODDRST. */ + +/*! @brief Read current value of the USB_CTL_ODDRST field. */ +#define BR_USB_CTL_ODDRST(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_ODDRST)) + +/*! @brief Format value for bitfield USB_CTL_ODDRST. */ +#define BF_USB_CTL_ODDRST(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_ODDRST) & BM_USB_CTL_ODDRST) + +/*! @brief Set the ODDRST field to a new value. */ +#define BW_USB_CTL_ODDRST(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_ODDRST) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field RESUME[2] (RW) + * + * When set to 1 this bit enables the USB Module to execute resume signaling. + * This allows the USB Module to perform remote wake-up. Software must set RESUME + * to 1 for the required amount of time and then clear it to 0. If the HOSTMODEEN + * bit is set, the USB module appends a Low Speed End of Packet to the Resume + * signaling when the RESUME bit is cleared. For more information on RESUME + * signaling see Section 7.1.4.5 of the USB specification version 1.0. + */ +/*@{*/ +#define BP_USB_CTL_RESUME (2U) /*!< Bit position for USB_CTL_RESUME. */ +#define BM_USB_CTL_RESUME (0x04U) /*!< Bit mask for USB_CTL_RESUME. */ +#define BS_USB_CTL_RESUME (1U) /*!< Bit field size in bits for USB_CTL_RESUME. */ + +/*! @brief Read current value of the USB_CTL_RESUME field. */ +#define BR_USB_CTL_RESUME(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_RESUME)) + +/*! @brief Format value for bitfield USB_CTL_RESUME. */ +#define BF_USB_CTL_RESUME(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_RESUME) & BM_USB_CTL_RESUME) + +/*! @brief Set the RESUME field to a new value. */ +#define BW_USB_CTL_RESUME(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_RESUME) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field HOSTMODEEN[3] (RW) + * + * When set to 1, this bit enables the USB Module to operate in Host mode. In + * host mode, the USB module performs USB transactions under the programmed control + * of the host processor. + */ +/*@{*/ +#define BP_USB_CTL_HOSTMODEEN (3U) /*!< Bit position for USB_CTL_HOSTMODEEN. */ +#define BM_USB_CTL_HOSTMODEEN (0x08U) /*!< Bit mask for USB_CTL_HOSTMODEEN. */ +#define BS_USB_CTL_HOSTMODEEN (1U) /*!< Bit field size in bits for USB_CTL_HOSTMODEEN. */ + +/*! @brief Read current value of the USB_CTL_HOSTMODEEN field. */ +#define BR_USB_CTL_HOSTMODEEN(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_HOSTMODEEN)) + +/*! @brief Format value for bitfield USB_CTL_HOSTMODEEN. */ +#define BF_USB_CTL_HOSTMODEEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_HOSTMODEEN) & BM_USB_CTL_HOSTMODEEN) + +/*! @brief Set the HOSTMODEEN field to a new value. */ +#define BW_USB_CTL_HOSTMODEEN(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_HOSTMODEEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field RESET[4] (RW) + * + * Setting this bit enables the USB Module to generate USB reset signaling. This + * allows the USB Module to reset USB peripherals. This control signal is only + * valid in Host mode (HOSTMODEEN=1). Software must set RESET to 1 for the + * required amount of time and then clear it to 0 to end reset signaling. For more + * information on reset signaling see Section 7.1.4.3 of the USB specification version + * 1.0. + */ +/*@{*/ +#define BP_USB_CTL_RESET (4U) /*!< Bit position for USB_CTL_RESET. */ +#define BM_USB_CTL_RESET (0x10U) /*!< Bit mask for USB_CTL_RESET. */ +#define BS_USB_CTL_RESET (1U) /*!< Bit field size in bits for USB_CTL_RESET. */ + +/*! @brief Read current value of the USB_CTL_RESET field. */ +#define BR_USB_CTL_RESET(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_RESET)) + +/*! @brief Format value for bitfield USB_CTL_RESET. */ +#define BF_USB_CTL_RESET(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_RESET) & BM_USB_CTL_RESET) + +/*! @brief Set the RESET field to a new value. */ +#define BW_USB_CTL_RESET(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_RESET) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field TXSUSPENDTOKENBUSY[5] (RW) + * + * In Host mode, TOKEN_BUSY is set when the USB module is busy executing a USB + * token. Software must not write more token commands to the Token Register when + * TOKEN_BUSY is set. Software should check this field before writing any tokens + * to the Token Register to ensure that token commands are not lost. In Target + * mode, TXD_SUSPEND is set when the SIE has disabled packet transmission and + * reception. Clearing this bit allows the SIE to continue token processing. This bit + * is set by the SIE when a SETUP Token is received allowing software to dequeue + * any pending packet transactions in the BDT before resuming token processing. + */ +/*@{*/ +#define BP_USB_CTL_TXSUSPENDTOKENBUSY (5U) /*!< Bit position for USB_CTL_TXSUSPENDTOKENBUSY. */ +#define BM_USB_CTL_TXSUSPENDTOKENBUSY (0x20U) /*!< Bit mask for USB_CTL_TXSUSPENDTOKENBUSY. */ +#define BS_USB_CTL_TXSUSPENDTOKENBUSY (1U) /*!< Bit field size in bits for USB_CTL_TXSUSPENDTOKENBUSY. */ + +/*! @brief Read current value of the USB_CTL_TXSUSPENDTOKENBUSY field. */ +#define BR_USB_CTL_TXSUSPENDTOKENBUSY(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_TXSUSPENDTOKENBUSY)) + +/*! @brief Format value for bitfield USB_CTL_TXSUSPENDTOKENBUSY. */ +#define BF_USB_CTL_TXSUSPENDTOKENBUSY(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_TXSUSPENDTOKENBUSY) & BM_USB_CTL_TXSUSPENDTOKENBUSY) + +/*! @brief Set the TXSUSPENDTOKENBUSY field to a new value. */ +#define BW_USB_CTL_TXSUSPENDTOKENBUSY(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_TXSUSPENDTOKENBUSY) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field SE0[6] (RW) + */ +/*@{*/ +#define BP_USB_CTL_SE0 (6U) /*!< Bit position for USB_CTL_SE0. */ +#define BM_USB_CTL_SE0 (0x40U) /*!< Bit mask for USB_CTL_SE0. */ +#define BS_USB_CTL_SE0 (1U) /*!< Bit field size in bits for USB_CTL_SE0. */ + +/*! @brief Read current value of the USB_CTL_SE0 field. */ +#define BR_USB_CTL_SE0(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_SE0)) + +/*! @brief Format value for bitfield USB_CTL_SE0. */ +#define BF_USB_CTL_SE0(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_SE0) & BM_USB_CTL_SE0) + +/*! @brief Set the SE0 field to a new value. */ +#define BW_USB_CTL_SE0(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_SE0) = (v)) +/*@}*/ + +/*! + * @name Register USB_CTL, field JSTATE[7] (RW) + * + * The polarity of this signal is affected by the current state of LSEN . + */ +/*@{*/ +#define BP_USB_CTL_JSTATE (7U) /*!< Bit position for USB_CTL_JSTATE. */ +#define BM_USB_CTL_JSTATE (0x80U) /*!< Bit mask for USB_CTL_JSTATE. */ +#define BS_USB_CTL_JSTATE (1U) /*!< Bit field size in bits for USB_CTL_JSTATE. */ + +/*! @brief Read current value of the USB_CTL_JSTATE field. */ +#define BR_USB_CTL_JSTATE(x) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_JSTATE)) + +/*! @brief Format value for bitfield USB_CTL_JSTATE. */ +#define BF_USB_CTL_JSTATE(v) ((uint8_t)((uint8_t)(v) << BP_USB_CTL_JSTATE) & BM_USB_CTL_JSTATE) + +/*! @brief Set the JSTATE field to a new value. */ +#define BW_USB_CTL_JSTATE(x, v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR(x), BP_USB_CTL_JSTATE) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_ADDR - Address register + ******************************************************************************/ + +/*! + * @brief HW_USB_ADDR - Address register (RW) + * + * Reset value: 0x00U + * + * Holds the unique USB address that the USB module decodes when in Peripheral + * mode (HOSTMODEEN=0). When operating in Host mode (HOSTMODEEN=1) the USB module + * transmits this address with a TOKEN packet. This enables the USB module to + * uniquely address any USB peripheral. In either mode, CTL[USBENSOFEN] must be 1. + * The Address register is reset to 0x00 after the reset input becomes active or + * the USB module decodes a USB reset signal. This action initializes the Address + * register to decode address 0x00 as required by the USB specification. + */ +typedef union _hw_usb_addr +{ + uint8_t U; + struct _hw_usb_addr_bitfields + { + uint8_t ADDR : 7; /*!< [6:0] USB Address */ + uint8_t LSEN : 1; /*!< [7] Low Speed Enable bit */ + } B; +} hw_usb_addr_t; + +/*! + * @name Constants and macros for entire USB_ADDR register + */ +/*@{*/ +#define HW_USB_ADDR_ADDR(x) ((x) + 0x98U) + +#define HW_USB_ADDR(x) (*(__IO hw_usb_addr_t *) HW_USB_ADDR_ADDR(x)) +#define HW_USB_ADDR_RD(x) (HW_USB_ADDR(x).U) +#define HW_USB_ADDR_WR(x, v) (HW_USB_ADDR(x).U = (v)) +#define HW_USB_ADDR_SET(x, v) (HW_USB_ADDR_WR(x, HW_USB_ADDR_RD(x) | (v))) +#define HW_USB_ADDR_CLR(x, v) (HW_USB_ADDR_WR(x, HW_USB_ADDR_RD(x) & ~(v))) +#define HW_USB_ADDR_TOG(x, v) (HW_USB_ADDR_WR(x, HW_USB_ADDR_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_ADDR bitfields + */ + +/*! + * @name Register USB_ADDR, field ADDR[6:0] (RW) + * + * Defines the USB address that the USB module decodes in peripheral mode, or + * transmits when in host mode. + */ +/*@{*/ +#define BP_USB_ADDR_ADDR (0U) /*!< Bit position for USB_ADDR_ADDR. */ +#define BM_USB_ADDR_ADDR (0x7FU) /*!< Bit mask for USB_ADDR_ADDR. */ +#define BS_USB_ADDR_ADDR (7U) /*!< Bit field size in bits for USB_ADDR_ADDR. */ + +/*! @brief Read current value of the USB_ADDR_ADDR field. */ +#define BR_USB_ADDR_ADDR(x) (HW_USB_ADDR(x).B.ADDR) + +/*! @brief Format value for bitfield USB_ADDR_ADDR. */ +#define BF_USB_ADDR_ADDR(v) ((uint8_t)((uint8_t)(v) << BP_USB_ADDR_ADDR) & BM_USB_ADDR_ADDR) + +/*! @brief Set the ADDR field to a new value. */ +#define BW_USB_ADDR_ADDR(x, v) (HW_USB_ADDR_WR(x, (HW_USB_ADDR_RD(x) & ~BM_USB_ADDR_ADDR) | BF_USB_ADDR_ADDR(v))) +/*@}*/ + +/*! + * @name Register USB_ADDR, field LSEN[7] (RW) + * + * Informs the USB module that the next token command written to the token + * register must be performed at low speed. This enables the USB module to perform the + * necessary preamble required for low-speed data transmissions. + */ +/*@{*/ +#define BP_USB_ADDR_LSEN (7U) /*!< Bit position for USB_ADDR_LSEN. */ +#define BM_USB_ADDR_LSEN (0x80U) /*!< Bit mask for USB_ADDR_LSEN. */ +#define BS_USB_ADDR_LSEN (1U) /*!< Bit field size in bits for USB_ADDR_LSEN. */ + +/*! @brief Read current value of the USB_ADDR_LSEN field. */ +#define BR_USB_ADDR_LSEN(x) (BITBAND_ACCESS8(HW_USB_ADDR_ADDR(x), BP_USB_ADDR_LSEN)) + +/*! @brief Format value for bitfield USB_ADDR_LSEN. */ +#define BF_USB_ADDR_LSEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ADDR_LSEN) & BM_USB_ADDR_LSEN) + +/*! @brief Set the LSEN field to a new value. */ +#define BW_USB_ADDR_LSEN(x, v) (BITBAND_ACCESS8(HW_USB_ADDR_ADDR(x), BP_USB_ADDR_LSEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_BDTPAGE1 - BDT Page register 1 + ******************************************************************************/ + +/*! + * @brief HW_USB_BDTPAGE1 - BDT Page register 1 (RW) + * + * Reset value: 0x00U + * + * Provides address bits 15 through 9 of the base address where the current + * Buffer Descriptor Table (BDT) resides in system memory. The 32-bit BDT Base + * Address is always aligned on 512-byte boundaries, so bits 8 through 0 of the base + * address are always zero. + */ +typedef union _hw_usb_bdtpage1 +{ + uint8_t U; + struct _hw_usb_bdtpage1_bitfields + { + uint8_t RESERVED0 : 1; /*!< [0] */ + uint8_t BDTBA : 7; /*!< [7:1] */ + } B; +} hw_usb_bdtpage1_t; + +/*! + * @name Constants and macros for entire USB_BDTPAGE1 register + */ +/*@{*/ +#define HW_USB_BDTPAGE1_ADDR(x) ((x) + 0x9CU) + +#define HW_USB_BDTPAGE1(x) (*(__IO hw_usb_bdtpage1_t *) HW_USB_BDTPAGE1_ADDR(x)) +#define HW_USB_BDTPAGE1_RD(x) (HW_USB_BDTPAGE1(x).U) +#define HW_USB_BDTPAGE1_WR(x, v) (HW_USB_BDTPAGE1(x).U = (v)) +#define HW_USB_BDTPAGE1_SET(x, v) (HW_USB_BDTPAGE1_WR(x, HW_USB_BDTPAGE1_RD(x) | (v))) +#define HW_USB_BDTPAGE1_CLR(x, v) (HW_USB_BDTPAGE1_WR(x, HW_USB_BDTPAGE1_RD(x) & ~(v))) +#define HW_USB_BDTPAGE1_TOG(x, v) (HW_USB_BDTPAGE1_WR(x, HW_USB_BDTPAGE1_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_BDTPAGE1 bitfields + */ + +/*! + * @name Register USB_BDTPAGE1, field BDTBA[7:1] (RW) + * + * Provides address bits 15 through 9 of the BDT base address. + */ +/*@{*/ +#define BP_USB_BDTPAGE1_BDTBA (1U) /*!< Bit position for USB_BDTPAGE1_BDTBA. */ +#define BM_USB_BDTPAGE1_BDTBA (0xFEU) /*!< Bit mask for USB_BDTPAGE1_BDTBA. */ +#define BS_USB_BDTPAGE1_BDTBA (7U) /*!< Bit field size in bits for USB_BDTPAGE1_BDTBA. */ + +/*! @brief Read current value of the USB_BDTPAGE1_BDTBA field. */ +#define BR_USB_BDTPAGE1_BDTBA(x) (HW_USB_BDTPAGE1(x).B.BDTBA) + +/*! @brief Format value for bitfield USB_BDTPAGE1_BDTBA. */ +#define BF_USB_BDTPAGE1_BDTBA(v) ((uint8_t)((uint8_t)(v) << BP_USB_BDTPAGE1_BDTBA) & BM_USB_BDTPAGE1_BDTBA) + +/*! @brief Set the BDTBA field to a new value. */ +#define BW_USB_BDTPAGE1_BDTBA(x, v) (HW_USB_BDTPAGE1_WR(x, (HW_USB_BDTPAGE1_RD(x) & ~BM_USB_BDTPAGE1_BDTBA) | BF_USB_BDTPAGE1_BDTBA(v))) +/*@}*/ + +/******************************************************************************* + * HW_USB_FRMNUML - Frame Number register Low + ******************************************************************************/ + +/*! + * @brief HW_USB_FRMNUML - Frame Number register Low (RW) + * + * Reset value: 0x00U + * + * The Frame Number registers (low and high) contain the 11-bit frame number. + * These registers are updated with the current frame number whenever a SOF TOKEN + * is received. + */ +typedef union _hw_usb_frmnuml +{ + uint8_t U; + struct _hw_usb_frmnuml_bitfields + { + uint8_t FRM : 8; /*!< [7:0] */ + } B; +} hw_usb_frmnuml_t; + +/*! + * @name Constants and macros for entire USB_FRMNUML register + */ +/*@{*/ +#define HW_USB_FRMNUML_ADDR(x) ((x) + 0xA0U) + +#define HW_USB_FRMNUML(x) (*(__IO hw_usb_frmnuml_t *) HW_USB_FRMNUML_ADDR(x)) +#define HW_USB_FRMNUML_RD(x) (HW_USB_FRMNUML(x).U) +#define HW_USB_FRMNUML_WR(x, v) (HW_USB_FRMNUML(x).U = (v)) +#define HW_USB_FRMNUML_SET(x, v) (HW_USB_FRMNUML_WR(x, HW_USB_FRMNUML_RD(x) | (v))) +#define HW_USB_FRMNUML_CLR(x, v) (HW_USB_FRMNUML_WR(x, HW_USB_FRMNUML_RD(x) & ~(v))) +#define HW_USB_FRMNUML_TOG(x, v) (HW_USB_FRMNUML_WR(x, HW_USB_FRMNUML_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_FRMNUML bitfields + */ + +/*! + * @name Register USB_FRMNUML, field FRM[7:0] (RW) + * + * This 8-bit field and the 3-bit field in the Frame Number Register High are + * used to compute the address where the current Buffer Descriptor Table (BDT) + * resides in system memory. + */ +/*@{*/ +#define BP_USB_FRMNUML_FRM (0U) /*!< Bit position for USB_FRMNUML_FRM. */ +#define BM_USB_FRMNUML_FRM (0xFFU) /*!< Bit mask for USB_FRMNUML_FRM. */ +#define BS_USB_FRMNUML_FRM (8U) /*!< Bit field size in bits for USB_FRMNUML_FRM. */ + +/*! @brief Read current value of the USB_FRMNUML_FRM field. */ +#define BR_USB_FRMNUML_FRM(x) (HW_USB_FRMNUML(x).U) + +/*! @brief Format value for bitfield USB_FRMNUML_FRM. */ +#define BF_USB_FRMNUML_FRM(v) ((uint8_t)((uint8_t)(v) << BP_USB_FRMNUML_FRM) & BM_USB_FRMNUML_FRM) + +/*! @brief Set the FRM field to a new value. */ +#define BW_USB_FRMNUML_FRM(x, v) (HW_USB_FRMNUML_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_FRMNUMH - Frame Number register High + ******************************************************************************/ + +/*! + * @brief HW_USB_FRMNUMH - Frame Number register High (RW) + * + * Reset value: 0x00U + * + * The Frame Number registers (low and high) contain the 11-bit frame number. + * These registers are updated with the current frame number whenever a SOF TOKEN + * is received. + */ +typedef union _hw_usb_frmnumh +{ + uint8_t U; + struct _hw_usb_frmnumh_bitfields + { + uint8_t FRM : 3; /*!< [2:0] */ + uint8_t RESERVED0 : 5; /*!< [7:3] */ + } B; +} hw_usb_frmnumh_t; + +/*! + * @name Constants and macros for entire USB_FRMNUMH register + */ +/*@{*/ +#define HW_USB_FRMNUMH_ADDR(x) ((x) + 0xA4U) + +#define HW_USB_FRMNUMH(x) (*(__IO hw_usb_frmnumh_t *) HW_USB_FRMNUMH_ADDR(x)) +#define HW_USB_FRMNUMH_RD(x) (HW_USB_FRMNUMH(x).U) +#define HW_USB_FRMNUMH_WR(x, v) (HW_USB_FRMNUMH(x).U = (v)) +#define HW_USB_FRMNUMH_SET(x, v) (HW_USB_FRMNUMH_WR(x, HW_USB_FRMNUMH_RD(x) | (v))) +#define HW_USB_FRMNUMH_CLR(x, v) (HW_USB_FRMNUMH_WR(x, HW_USB_FRMNUMH_RD(x) & ~(v))) +#define HW_USB_FRMNUMH_TOG(x, v) (HW_USB_FRMNUMH_WR(x, HW_USB_FRMNUMH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_FRMNUMH bitfields + */ + +/*! + * @name Register USB_FRMNUMH, field FRM[2:0] (RW) + * + * This 3-bit field and the 8-bit field in the Frame Number Register Low are + * used to compute the address where the current Buffer Descriptor Table (BDT) + * resides in system memory. + */ +/*@{*/ +#define BP_USB_FRMNUMH_FRM (0U) /*!< Bit position for USB_FRMNUMH_FRM. */ +#define BM_USB_FRMNUMH_FRM (0x07U) /*!< Bit mask for USB_FRMNUMH_FRM. */ +#define BS_USB_FRMNUMH_FRM (3U) /*!< Bit field size in bits for USB_FRMNUMH_FRM. */ + +/*! @brief Read current value of the USB_FRMNUMH_FRM field. */ +#define BR_USB_FRMNUMH_FRM(x) (HW_USB_FRMNUMH(x).B.FRM) + +/*! @brief Format value for bitfield USB_FRMNUMH_FRM. */ +#define BF_USB_FRMNUMH_FRM(v) ((uint8_t)((uint8_t)(v) << BP_USB_FRMNUMH_FRM) & BM_USB_FRMNUMH_FRM) + +/*! @brief Set the FRM field to a new value. */ +#define BW_USB_FRMNUMH_FRM(x, v) (HW_USB_FRMNUMH_WR(x, (HW_USB_FRMNUMH_RD(x) & ~BM_USB_FRMNUMH_FRM) | BF_USB_FRMNUMH_FRM(v))) +/*@}*/ + +/******************************************************************************* + * HW_USB_TOKEN - Token register + ******************************************************************************/ + +/*! + * @brief HW_USB_TOKEN - Token register (RW) + * + * Reset value: 0x00U + * + * Used to initiate USB transactions when in host mode (HOSTMODEEN=1). When the + * software needs to execute a USB transaction to a peripheral, it writes the + * TOKEN type and endpoint to this register. After this register has been written, + * the USB module begins the specified USB transaction to the address contained in + * the address register. The processor core must always check that the + * TOKEN_BUSY bit in the control register is not 1 before writing to the Token Register. + * This ensures that the token commands are not overwritten before they can be + * executed. The address register and endpoint control register 0 are also used when + * performing a token command and therefore must also be written before the + * Token Register. The address register is used to select the USB peripheral address + * transmitted by the token command. The endpoint control register determines the + * handshake and retry policies used during the transfer. + */ +typedef union _hw_usb_token +{ + uint8_t U; + struct _hw_usb_token_bitfields + { + uint8_t TOKENENDPT : 4; /*!< [3:0] */ + uint8_t TOKENPID : 4; /*!< [7:4] */ + } B; +} hw_usb_token_t; + +/*! + * @name Constants and macros for entire USB_TOKEN register + */ +/*@{*/ +#define HW_USB_TOKEN_ADDR(x) ((x) + 0xA8U) + +#define HW_USB_TOKEN(x) (*(__IO hw_usb_token_t *) HW_USB_TOKEN_ADDR(x)) +#define HW_USB_TOKEN_RD(x) (HW_USB_TOKEN(x).U) +#define HW_USB_TOKEN_WR(x, v) (HW_USB_TOKEN(x).U = (v)) +#define HW_USB_TOKEN_SET(x, v) (HW_USB_TOKEN_WR(x, HW_USB_TOKEN_RD(x) | (v))) +#define HW_USB_TOKEN_CLR(x, v) (HW_USB_TOKEN_WR(x, HW_USB_TOKEN_RD(x) & ~(v))) +#define HW_USB_TOKEN_TOG(x, v) (HW_USB_TOKEN_WR(x, HW_USB_TOKEN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_TOKEN bitfields + */ + +/*! + * @name Register USB_TOKEN, field TOKENENDPT[3:0] (RW) + * + * Holds the Endpoint address for the token command. The four bit value written + * must be a valid endpoint. + */ +/*@{*/ +#define BP_USB_TOKEN_TOKENENDPT (0U) /*!< Bit position for USB_TOKEN_TOKENENDPT. */ +#define BM_USB_TOKEN_TOKENENDPT (0x0FU) /*!< Bit mask for USB_TOKEN_TOKENENDPT. */ +#define BS_USB_TOKEN_TOKENENDPT (4U) /*!< Bit field size in bits for USB_TOKEN_TOKENENDPT. */ + +/*! @brief Read current value of the USB_TOKEN_TOKENENDPT field. */ +#define BR_USB_TOKEN_TOKENENDPT(x) (HW_USB_TOKEN(x).B.TOKENENDPT) + +/*! @brief Format value for bitfield USB_TOKEN_TOKENENDPT. */ +#define BF_USB_TOKEN_TOKENENDPT(v) ((uint8_t)((uint8_t)(v) << BP_USB_TOKEN_TOKENENDPT) & BM_USB_TOKEN_TOKENENDPT) + +/*! @brief Set the TOKENENDPT field to a new value. */ +#define BW_USB_TOKEN_TOKENENDPT(x, v) (HW_USB_TOKEN_WR(x, (HW_USB_TOKEN_RD(x) & ~BM_USB_TOKEN_TOKENENDPT) | BF_USB_TOKEN_TOKENENDPT(v))) +/*@}*/ + +/*! + * @name Register USB_TOKEN, field TOKENPID[7:4] (RW) + * + * Contains the token type executed by the USB module. + * + * Values: + * - 0001 - OUT Token. USB Module performs an OUT (TX) transaction. + * - 1001 - IN Token. USB Module performs an In (RX) transaction. + * - 1101 - SETUP Token. USB Module performs a SETUP (TX) transaction + */ +/*@{*/ +#define BP_USB_TOKEN_TOKENPID (4U) /*!< Bit position for USB_TOKEN_TOKENPID. */ +#define BM_USB_TOKEN_TOKENPID (0xF0U) /*!< Bit mask for USB_TOKEN_TOKENPID. */ +#define BS_USB_TOKEN_TOKENPID (4U) /*!< Bit field size in bits for USB_TOKEN_TOKENPID. */ + +/*! @brief Read current value of the USB_TOKEN_TOKENPID field. */ +#define BR_USB_TOKEN_TOKENPID(x) (HW_USB_TOKEN(x).B.TOKENPID) + +/*! @brief Format value for bitfield USB_TOKEN_TOKENPID. */ +#define BF_USB_TOKEN_TOKENPID(v) ((uint8_t)((uint8_t)(v) << BP_USB_TOKEN_TOKENPID) & BM_USB_TOKEN_TOKENPID) + +/*! @brief Set the TOKENPID field to a new value. */ +#define BW_USB_TOKEN_TOKENPID(x, v) (HW_USB_TOKEN_WR(x, (HW_USB_TOKEN_RD(x) & ~BM_USB_TOKEN_TOKENPID) | BF_USB_TOKEN_TOKENPID(v))) +/*@}*/ + +/******************************************************************************* + * HW_USB_SOFTHLD - SOF Threshold register + ******************************************************************************/ + +/*! + * @brief HW_USB_SOFTHLD - SOF Threshold register (RW) + * + * Reset value: 0x00U + * + * The SOF Threshold Register is used only in Host mode (HOSTMODEEN=1). When in + * Host mode, the 14-bit SOF counter counts the interval between SOF frames. The + * SOF must be transmitted every 1ms so therefore the SOF counter is loaded with + * a value of 12000. When the SOF counter reaches zero, a Start Of Frame (SOF) + * token is transmitted. The SOF threshold register is used to program the number + * of USB byte times before the SOF to stop initiating token packet transactions. + * This register must be set to a value that ensures that other packets are not + * actively being transmitted when the SOF time counts to zero. When the SOF + * counter reaches the threshold value, no more tokens are transmitted until after the + * SOF has been transmitted. The value programmed into the threshold register + * must reserve enough time to ensure the worst case transaction completes. In + * general the worst case transaction is an IN token followed by a data packet from + * the target followed by the response from the host. The actual time required is + * a function of the maximum packet size on the bus. Typical values for the SOF + * threshold are: 64-byte packets=74; 32-byte packets=42; 16-byte packets=26; + * 8-byte packets=18. + */ +typedef union _hw_usb_softhld +{ + uint8_t U; + struct _hw_usb_softhld_bitfields + { + uint8_t CNT : 8; /*!< [7:0] */ + } B; +} hw_usb_softhld_t; + +/*! + * @name Constants and macros for entire USB_SOFTHLD register + */ +/*@{*/ +#define HW_USB_SOFTHLD_ADDR(x) ((x) + 0xACU) + +#define HW_USB_SOFTHLD(x) (*(__IO hw_usb_softhld_t *) HW_USB_SOFTHLD_ADDR(x)) +#define HW_USB_SOFTHLD_RD(x) (HW_USB_SOFTHLD(x).U) +#define HW_USB_SOFTHLD_WR(x, v) (HW_USB_SOFTHLD(x).U = (v)) +#define HW_USB_SOFTHLD_SET(x, v) (HW_USB_SOFTHLD_WR(x, HW_USB_SOFTHLD_RD(x) | (v))) +#define HW_USB_SOFTHLD_CLR(x, v) (HW_USB_SOFTHLD_WR(x, HW_USB_SOFTHLD_RD(x) & ~(v))) +#define HW_USB_SOFTHLD_TOG(x, v) (HW_USB_SOFTHLD_WR(x, HW_USB_SOFTHLD_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_SOFTHLD bitfields + */ + +/*! + * @name Register USB_SOFTHLD, field CNT[7:0] (RW) + * + * Represents the SOF count threshold in byte times. + */ +/*@{*/ +#define BP_USB_SOFTHLD_CNT (0U) /*!< Bit position for USB_SOFTHLD_CNT. */ +#define BM_USB_SOFTHLD_CNT (0xFFU) /*!< Bit mask for USB_SOFTHLD_CNT. */ +#define BS_USB_SOFTHLD_CNT (8U) /*!< Bit field size in bits for USB_SOFTHLD_CNT. */ + +/*! @brief Read current value of the USB_SOFTHLD_CNT field. */ +#define BR_USB_SOFTHLD_CNT(x) (HW_USB_SOFTHLD(x).U) + +/*! @brief Format value for bitfield USB_SOFTHLD_CNT. */ +#define BF_USB_SOFTHLD_CNT(v) ((uint8_t)((uint8_t)(v) << BP_USB_SOFTHLD_CNT) & BM_USB_SOFTHLD_CNT) + +/*! @brief Set the CNT field to a new value. */ +#define BW_USB_SOFTHLD_CNT(x, v) (HW_USB_SOFTHLD_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_BDTPAGE2 - BDT Page Register 2 + ******************************************************************************/ + +/*! + * @brief HW_USB_BDTPAGE2 - BDT Page Register 2 (RW) + * + * Reset value: 0x00U + * + * Contains an 8-bit value used to compute the address where the current Buffer + * Descriptor Table (BDT) resides in system memory. + */ +typedef union _hw_usb_bdtpage2 +{ + uint8_t U; + struct _hw_usb_bdtpage2_bitfields + { + uint8_t BDTBA : 8; /*!< [7:0] */ + } B; +} hw_usb_bdtpage2_t; + +/*! + * @name Constants and macros for entire USB_BDTPAGE2 register + */ +/*@{*/ +#define HW_USB_BDTPAGE2_ADDR(x) ((x) + 0xB0U) + +#define HW_USB_BDTPAGE2(x) (*(__IO hw_usb_bdtpage2_t *) HW_USB_BDTPAGE2_ADDR(x)) +#define HW_USB_BDTPAGE2_RD(x) (HW_USB_BDTPAGE2(x).U) +#define HW_USB_BDTPAGE2_WR(x, v) (HW_USB_BDTPAGE2(x).U = (v)) +#define HW_USB_BDTPAGE2_SET(x, v) (HW_USB_BDTPAGE2_WR(x, HW_USB_BDTPAGE2_RD(x) | (v))) +#define HW_USB_BDTPAGE2_CLR(x, v) (HW_USB_BDTPAGE2_WR(x, HW_USB_BDTPAGE2_RD(x) & ~(v))) +#define HW_USB_BDTPAGE2_TOG(x, v) (HW_USB_BDTPAGE2_WR(x, HW_USB_BDTPAGE2_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_BDTPAGE2 bitfields + */ + +/*! + * @name Register USB_BDTPAGE2, field BDTBA[7:0] (RW) + * + * Provides address bits 23 through 16 of the BDT base address that defines the + * location of Buffer Descriptor Table resides in system memory. + */ +/*@{*/ +#define BP_USB_BDTPAGE2_BDTBA (0U) /*!< Bit position for USB_BDTPAGE2_BDTBA. */ +#define BM_USB_BDTPAGE2_BDTBA (0xFFU) /*!< Bit mask for USB_BDTPAGE2_BDTBA. */ +#define BS_USB_BDTPAGE2_BDTBA (8U) /*!< Bit field size in bits for USB_BDTPAGE2_BDTBA. */ + +/*! @brief Read current value of the USB_BDTPAGE2_BDTBA field. */ +#define BR_USB_BDTPAGE2_BDTBA(x) (HW_USB_BDTPAGE2(x).U) + +/*! @brief Format value for bitfield USB_BDTPAGE2_BDTBA. */ +#define BF_USB_BDTPAGE2_BDTBA(v) ((uint8_t)((uint8_t)(v) << BP_USB_BDTPAGE2_BDTBA) & BM_USB_BDTPAGE2_BDTBA) + +/*! @brief Set the BDTBA field to a new value. */ +#define BW_USB_BDTPAGE2_BDTBA(x, v) (HW_USB_BDTPAGE2_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_BDTPAGE3 - BDT Page Register 3 + ******************************************************************************/ + +/*! + * @brief HW_USB_BDTPAGE3 - BDT Page Register 3 (RW) + * + * Reset value: 0x00U + * + * Contains an 8-bit value used to compute the address where the current Buffer + * Descriptor Table (BDT) resides in system memory. + */ +typedef union _hw_usb_bdtpage3 +{ + uint8_t U; + struct _hw_usb_bdtpage3_bitfields + { + uint8_t BDTBA : 8; /*!< [7:0] */ + } B; +} hw_usb_bdtpage3_t; + +/*! + * @name Constants and macros for entire USB_BDTPAGE3 register + */ +/*@{*/ +#define HW_USB_BDTPAGE3_ADDR(x) ((x) + 0xB4U) + +#define HW_USB_BDTPAGE3(x) (*(__IO hw_usb_bdtpage3_t *) HW_USB_BDTPAGE3_ADDR(x)) +#define HW_USB_BDTPAGE3_RD(x) (HW_USB_BDTPAGE3(x).U) +#define HW_USB_BDTPAGE3_WR(x, v) (HW_USB_BDTPAGE3(x).U = (v)) +#define HW_USB_BDTPAGE3_SET(x, v) (HW_USB_BDTPAGE3_WR(x, HW_USB_BDTPAGE3_RD(x) | (v))) +#define HW_USB_BDTPAGE3_CLR(x, v) (HW_USB_BDTPAGE3_WR(x, HW_USB_BDTPAGE3_RD(x) & ~(v))) +#define HW_USB_BDTPAGE3_TOG(x, v) (HW_USB_BDTPAGE3_WR(x, HW_USB_BDTPAGE3_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_BDTPAGE3 bitfields + */ + +/*! + * @name Register USB_BDTPAGE3, field BDTBA[7:0] (RW) + * + * Provides address bits 31 through 24 of the BDT base address that defines the + * location of Buffer Descriptor Table resides in system memory. + */ +/*@{*/ +#define BP_USB_BDTPAGE3_BDTBA (0U) /*!< Bit position for USB_BDTPAGE3_BDTBA. */ +#define BM_USB_BDTPAGE3_BDTBA (0xFFU) /*!< Bit mask for USB_BDTPAGE3_BDTBA. */ +#define BS_USB_BDTPAGE3_BDTBA (8U) /*!< Bit field size in bits for USB_BDTPAGE3_BDTBA. */ + +/*! @brief Read current value of the USB_BDTPAGE3_BDTBA field. */ +#define BR_USB_BDTPAGE3_BDTBA(x) (HW_USB_BDTPAGE3(x).U) + +/*! @brief Format value for bitfield USB_BDTPAGE3_BDTBA. */ +#define BF_USB_BDTPAGE3_BDTBA(v) ((uint8_t)((uint8_t)(v) << BP_USB_BDTPAGE3_BDTBA) & BM_USB_BDTPAGE3_BDTBA) + +/*! @brief Set the BDTBA field to a new value. */ +#define BW_USB_BDTPAGE3_BDTBA(x, v) (HW_USB_BDTPAGE3_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_ENDPTn - Endpoint Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_ENDPTn - Endpoint Control register (RW) + * + * Reset value: 0x00U + * + * Contains the endpoint control bits for each of the 16 endpoints available + * within the USB module for a decoded address. The format for these registers is + * shown in the following figure. Endpoint 0 (ENDPT0) is associated with control + * pipe 0, which is required for all USB functions. Therefore, after a USBRST + * interrupt occurs the processor core should set ENDPT0 to contain 0x0D. In Host mode + * ENDPT0 is used to determine the handshake, retry and low speed + * characteristics of the host transfer. For Control, Bulk and Interrupt transfers, the EPHSHK + * bit should be 1. For Isochronous transfers it should be 0. Common values to + * use for ENDPT0 in host mode are 0x4D for Control, Bulk, and Interrupt transfers, + * and 0x4C for Isochronous transfers. + */ +typedef union _hw_usb_endptn +{ + uint8_t U; + struct _hw_usb_endptn_bitfields + { + uint8_t EPHSHK : 1; /*!< [0] */ + uint8_t EPSTALL : 1; /*!< [1] */ + uint8_t EPTXEN : 1; /*!< [2] */ + uint8_t EPRXEN : 1; /*!< [3] */ + uint8_t EPCTLDIS : 1; /*!< [4] */ + uint8_t RESERVED0 : 1; /*!< [5] */ + uint8_t RETRYDIS : 1; /*!< [6] */ + uint8_t HOSTWOHUB : 1; /*!< [7] */ + } B; +} hw_usb_endptn_t; + +/*! + * @name Constants and macros for entire USB_ENDPTn register + */ +/*@{*/ +#define HW_USB_ENDPTn_COUNT (16U) + +#define HW_USB_ENDPTn_ADDR(x, n) ((x) + 0xC0U + (0x4U * (n))) + +#define HW_USB_ENDPTn(x, n) (*(__IO hw_usb_endptn_t *) HW_USB_ENDPTn_ADDR(x, n)) +#define HW_USB_ENDPTn_RD(x, n) (HW_USB_ENDPTn(x, n).U) +#define HW_USB_ENDPTn_WR(x, n, v) (HW_USB_ENDPTn(x, n).U = (v)) +#define HW_USB_ENDPTn_SET(x, n, v) (HW_USB_ENDPTn_WR(x, n, HW_USB_ENDPTn_RD(x, n) | (v))) +#define HW_USB_ENDPTn_CLR(x, n, v) (HW_USB_ENDPTn_WR(x, n, HW_USB_ENDPTn_RD(x, n) & ~(v))) +#define HW_USB_ENDPTn_TOG(x, n, v) (HW_USB_ENDPTn_WR(x, n, HW_USB_ENDPTn_RD(x, n) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_ENDPTn bitfields + */ + +/*! + * @name Register USB_ENDPTn, field EPHSHK[0] (RW) + * + * When set this bit enables an endpoint to perform handshaking during a + * transaction to this endpoint. This bit is generally 1 unless the endpoint is + * Isochronous. + */ +/*@{*/ +#define BP_USB_ENDPTn_EPHSHK (0U) /*!< Bit position for USB_ENDPTn_EPHSHK. */ +#define BM_USB_ENDPTn_EPHSHK (0x01U) /*!< Bit mask for USB_ENDPTn_EPHSHK. */ +#define BS_USB_ENDPTn_EPHSHK (1U) /*!< Bit field size in bits for USB_ENDPTn_EPHSHK. */ + +/*! @brief Read current value of the USB_ENDPTn_EPHSHK field. */ +#define BR_USB_ENDPTn_EPHSHK(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPHSHK)) + +/*! @brief Format value for bitfield USB_ENDPTn_EPHSHK. */ +#define BF_USB_ENDPTn_EPHSHK(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_EPHSHK) & BM_USB_ENDPTn_EPHSHK) + +/*! @brief Set the EPHSHK field to a new value. */ +#define BW_USB_ENDPTn_EPHSHK(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPHSHK) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field EPSTALL[1] (RW) + * + * When set this bit indicates that the endpoint is called. This bit has + * priority over all other control bits in the EndPoint Enable Register, but it is only + * valid if EPTXEN=1 or EPRXEN=1. Any access to this endpoint causes the USB + * Module to return a STALL handshake. After an endpoint is stalled it requires + * intervention from the Host Controller. + */ +/*@{*/ +#define BP_USB_ENDPTn_EPSTALL (1U) /*!< Bit position for USB_ENDPTn_EPSTALL. */ +#define BM_USB_ENDPTn_EPSTALL (0x02U) /*!< Bit mask for USB_ENDPTn_EPSTALL. */ +#define BS_USB_ENDPTn_EPSTALL (1U) /*!< Bit field size in bits for USB_ENDPTn_EPSTALL. */ + +/*! @brief Read current value of the USB_ENDPTn_EPSTALL field. */ +#define BR_USB_ENDPTn_EPSTALL(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPSTALL)) + +/*! @brief Format value for bitfield USB_ENDPTn_EPSTALL. */ +#define BF_USB_ENDPTn_EPSTALL(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_EPSTALL) & BM_USB_ENDPTn_EPSTALL) + +/*! @brief Set the EPSTALL field to a new value. */ +#define BW_USB_ENDPTn_EPSTALL(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPSTALL) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field EPTXEN[2] (RW) + * + * This bit, when set, enables the endpoint for TX transfers. + */ +/*@{*/ +#define BP_USB_ENDPTn_EPTXEN (2U) /*!< Bit position for USB_ENDPTn_EPTXEN. */ +#define BM_USB_ENDPTn_EPTXEN (0x04U) /*!< Bit mask for USB_ENDPTn_EPTXEN. */ +#define BS_USB_ENDPTn_EPTXEN (1U) /*!< Bit field size in bits for USB_ENDPTn_EPTXEN. */ + +/*! @brief Read current value of the USB_ENDPTn_EPTXEN field. */ +#define BR_USB_ENDPTn_EPTXEN(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPTXEN)) + +/*! @brief Format value for bitfield USB_ENDPTn_EPTXEN. */ +#define BF_USB_ENDPTn_EPTXEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_EPTXEN) & BM_USB_ENDPTn_EPTXEN) + +/*! @brief Set the EPTXEN field to a new value. */ +#define BW_USB_ENDPTn_EPTXEN(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPTXEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field EPRXEN[3] (RW) + * + * This bit, when set, enables the endpoint for RX transfers. + */ +/*@{*/ +#define BP_USB_ENDPTn_EPRXEN (3U) /*!< Bit position for USB_ENDPTn_EPRXEN. */ +#define BM_USB_ENDPTn_EPRXEN (0x08U) /*!< Bit mask for USB_ENDPTn_EPRXEN. */ +#define BS_USB_ENDPTn_EPRXEN (1U) /*!< Bit field size in bits for USB_ENDPTn_EPRXEN. */ + +/*! @brief Read current value of the USB_ENDPTn_EPRXEN field. */ +#define BR_USB_ENDPTn_EPRXEN(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPRXEN)) + +/*! @brief Format value for bitfield USB_ENDPTn_EPRXEN. */ +#define BF_USB_ENDPTn_EPRXEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_EPRXEN) & BM_USB_ENDPTn_EPRXEN) + +/*! @brief Set the EPRXEN field to a new value. */ +#define BW_USB_ENDPTn_EPRXEN(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPRXEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field EPCTLDIS[4] (RW) + * + * This bit, when set, disables control (SETUP) transfers. When cleared, control + * transfers are enabled. This applies if and only if the EPRXEN and EPTXEN bits + * are also set. + */ +/*@{*/ +#define BP_USB_ENDPTn_EPCTLDIS (4U) /*!< Bit position for USB_ENDPTn_EPCTLDIS. */ +#define BM_USB_ENDPTn_EPCTLDIS (0x10U) /*!< Bit mask for USB_ENDPTn_EPCTLDIS. */ +#define BS_USB_ENDPTn_EPCTLDIS (1U) /*!< Bit field size in bits for USB_ENDPTn_EPCTLDIS. */ + +/*! @brief Read current value of the USB_ENDPTn_EPCTLDIS field. */ +#define BR_USB_ENDPTn_EPCTLDIS(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPCTLDIS)) + +/*! @brief Format value for bitfield USB_ENDPTn_EPCTLDIS. */ +#define BF_USB_ENDPTn_EPCTLDIS(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_EPCTLDIS) & BM_USB_ENDPTn_EPCTLDIS) + +/*! @brief Set the EPCTLDIS field to a new value. */ +#define BW_USB_ENDPTn_EPCTLDIS(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_EPCTLDIS) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field RETRYDIS[6] (RW) + * + * This is a Host mode only bit and is present in the control register for + * endpoint 0 (ENDPT0) only. When set this bit causes the host to not retry NAK'ed + * (Negative Acknowledgement) transactions. When a transaction is NAKed, the BDT PID + * field is updated with the NAK PID, and the TOKEN_DNE interrupt is set. When + * this bit is cleared, NAKed transactions are retried in hardware. This bit must + * be set when the host is attempting to poll an interrupt endpoint. + */ +/*@{*/ +#define BP_USB_ENDPTn_RETRYDIS (6U) /*!< Bit position for USB_ENDPTn_RETRYDIS. */ +#define BM_USB_ENDPTn_RETRYDIS (0x40U) /*!< Bit mask for USB_ENDPTn_RETRYDIS. */ +#define BS_USB_ENDPTn_RETRYDIS (1U) /*!< Bit field size in bits for USB_ENDPTn_RETRYDIS. */ + +/*! @brief Read current value of the USB_ENDPTn_RETRYDIS field. */ +#define BR_USB_ENDPTn_RETRYDIS(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_RETRYDIS)) + +/*! @brief Format value for bitfield USB_ENDPTn_RETRYDIS. */ +#define BF_USB_ENDPTn_RETRYDIS(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_RETRYDIS) & BM_USB_ENDPTn_RETRYDIS) + +/*! @brief Set the RETRYDIS field to a new value. */ +#define BW_USB_ENDPTn_RETRYDIS(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_RETRYDIS) = (v)) +/*@}*/ + +/*! + * @name Register USB_ENDPTn, field HOSTWOHUB[7] (RW) + * + * This is a Host mode only field and is present in the control register for + * endpoint 0 (ENDPT0) only. When set this bit allows the host to communicate to a + * directly connected low speed device. When cleared, the host produces the + * PRE_PID. It then switches to low-speed signaling when sending a token to a low speed + * device as required to communicate with a low speed device through a hub. + */ +/*@{*/ +#define BP_USB_ENDPTn_HOSTWOHUB (7U) /*!< Bit position for USB_ENDPTn_HOSTWOHUB. */ +#define BM_USB_ENDPTn_HOSTWOHUB (0x80U) /*!< Bit mask for USB_ENDPTn_HOSTWOHUB. */ +#define BS_USB_ENDPTn_HOSTWOHUB (1U) /*!< Bit field size in bits for USB_ENDPTn_HOSTWOHUB. */ + +/*! @brief Read current value of the USB_ENDPTn_HOSTWOHUB field. */ +#define BR_USB_ENDPTn_HOSTWOHUB(x, n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_HOSTWOHUB)) + +/*! @brief Format value for bitfield USB_ENDPTn_HOSTWOHUB. */ +#define BF_USB_ENDPTn_HOSTWOHUB(v) ((uint8_t)((uint8_t)(v) << BP_USB_ENDPTn_HOSTWOHUB) & BM_USB_ENDPTn_HOSTWOHUB) + +/*! @brief Set the HOSTWOHUB field to a new value. */ +#define BW_USB_ENDPTn_HOSTWOHUB(x, n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(x, n), BP_USB_ENDPTn_HOSTWOHUB) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_USBCTRL - USB Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_USBCTRL - USB Control register (RW) + * + * Reset value: 0xC0U + */ +typedef union _hw_usb_usbctrl +{ + uint8_t U; + struct _hw_usb_usbctrl_bitfields + { + uint8_t RESERVED0 : 6; /*!< [5:0] */ + uint8_t PDE : 1; /*!< [6] */ + uint8_t SUSP : 1; /*!< [7] */ + } B; +} hw_usb_usbctrl_t; + +/*! + * @name Constants and macros for entire USB_USBCTRL register + */ +/*@{*/ +#define HW_USB_USBCTRL_ADDR(x) ((x) + 0x100U) + +#define HW_USB_USBCTRL(x) (*(__IO hw_usb_usbctrl_t *) HW_USB_USBCTRL_ADDR(x)) +#define HW_USB_USBCTRL_RD(x) (HW_USB_USBCTRL(x).U) +#define HW_USB_USBCTRL_WR(x, v) (HW_USB_USBCTRL(x).U = (v)) +#define HW_USB_USBCTRL_SET(x, v) (HW_USB_USBCTRL_WR(x, HW_USB_USBCTRL_RD(x) | (v))) +#define HW_USB_USBCTRL_CLR(x, v) (HW_USB_USBCTRL_WR(x, HW_USB_USBCTRL_RD(x) & ~(v))) +#define HW_USB_USBCTRL_TOG(x, v) (HW_USB_USBCTRL_WR(x, HW_USB_USBCTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_USBCTRL bitfields + */ + +/*! + * @name Register USB_USBCTRL, field PDE[6] (RW) + * + * Enables the weak pulldowns on the USB transceiver. + * + * Values: + * - 0 - Weak pulldowns are disabled on D+ and D-. + * - 1 - Weak pulldowns are enabled on D+ and D-. + */ +/*@{*/ +#define BP_USB_USBCTRL_PDE (6U) /*!< Bit position for USB_USBCTRL_PDE. */ +#define BM_USB_USBCTRL_PDE (0x40U) /*!< Bit mask for USB_USBCTRL_PDE. */ +#define BS_USB_USBCTRL_PDE (1U) /*!< Bit field size in bits for USB_USBCTRL_PDE. */ + +/*! @brief Read current value of the USB_USBCTRL_PDE field. */ +#define BR_USB_USBCTRL_PDE(x) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR(x), BP_USB_USBCTRL_PDE)) + +/*! @brief Format value for bitfield USB_USBCTRL_PDE. */ +#define BF_USB_USBCTRL_PDE(v) ((uint8_t)((uint8_t)(v) << BP_USB_USBCTRL_PDE) & BM_USB_USBCTRL_PDE) + +/*! @brief Set the PDE field to a new value. */ +#define BW_USB_USBCTRL_PDE(x, v) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR(x), BP_USB_USBCTRL_PDE) = (v)) +/*@}*/ + +/*! + * @name Register USB_USBCTRL, field SUSP[7] (RW) + * + * Places the USB transceiver into the suspend state. + * + * Values: + * - 0 - USB transceiver is not in suspend state. + * - 1 - USB transceiver is in suspend state. + */ +/*@{*/ +#define BP_USB_USBCTRL_SUSP (7U) /*!< Bit position for USB_USBCTRL_SUSP. */ +#define BM_USB_USBCTRL_SUSP (0x80U) /*!< Bit mask for USB_USBCTRL_SUSP. */ +#define BS_USB_USBCTRL_SUSP (1U) /*!< Bit field size in bits for USB_USBCTRL_SUSP. */ + +/*! @brief Read current value of the USB_USBCTRL_SUSP field. */ +#define BR_USB_USBCTRL_SUSP(x) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR(x), BP_USB_USBCTRL_SUSP)) + +/*! @brief Format value for bitfield USB_USBCTRL_SUSP. */ +#define BF_USB_USBCTRL_SUSP(v) ((uint8_t)((uint8_t)(v) << BP_USB_USBCTRL_SUSP) & BM_USB_USBCTRL_SUSP) + +/*! @brief Set the SUSP field to a new value. */ +#define BW_USB_USBCTRL_SUSP(x, v) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR(x), BP_USB_USBCTRL_SUSP) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_OBSERVE - USB OTG Observe register + ******************************************************************************/ + +/*! + * @brief HW_USB_OBSERVE - USB OTG Observe register (RO) + * + * Reset value: 0x50U + * + * Provides visibility on the state of the pull-ups and pull-downs at the + * transceiver. Useful when interfacing to an external OTG control module via a serial + * interface. + */ +typedef union _hw_usb_observe +{ + uint8_t U; + struct _hw_usb_observe_bitfields + { + uint8_t RESERVED0 : 4; /*!< [3:0] */ + uint8_t DMPD : 1; /*!< [4] */ + uint8_t RESERVED1 : 1; /*!< [5] */ + uint8_t DPPD : 1; /*!< [6] */ + uint8_t DPPU : 1; /*!< [7] */ + } B; +} hw_usb_observe_t; + +/*! + * @name Constants and macros for entire USB_OBSERVE register + */ +/*@{*/ +#define HW_USB_OBSERVE_ADDR(x) ((x) + 0x104U) + +#define HW_USB_OBSERVE(x) (*(__I hw_usb_observe_t *) HW_USB_OBSERVE_ADDR(x)) +#define HW_USB_OBSERVE_RD(x) (HW_USB_OBSERVE(x).U) +/*@}*/ + +/* + * Constants & macros for individual USB_OBSERVE bitfields + */ + +/*! + * @name Register USB_OBSERVE, field DMPD[4] (RO) + * + * Provides observability of the D- Pulldown enable at the USB transceiver. + * + * Values: + * - 0 - D- pulldown disabled. + * - 1 - D- pulldown enabled. + */ +/*@{*/ +#define BP_USB_OBSERVE_DMPD (4U) /*!< Bit position for USB_OBSERVE_DMPD. */ +#define BM_USB_OBSERVE_DMPD (0x10U) /*!< Bit mask for USB_OBSERVE_DMPD. */ +#define BS_USB_OBSERVE_DMPD (1U) /*!< Bit field size in bits for USB_OBSERVE_DMPD. */ + +/*! @brief Read current value of the USB_OBSERVE_DMPD field. */ +#define BR_USB_OBSERVE_DMPD(x) (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR(x), BP_USB_OBSERVE_DMPD)) +/*@}*/ + +/*! + * @name Register USB_OBSERVE, field DPPD[6] (RO) + * + * Provides observability of the D+ Pulldown enable at the USB transceiver. + * + * Values: + * - 0 - D+ pulldown disabled. + * - 1 - D+ pulldown enabled. + */ +/*@{*/ +#define BP_USB_OBSERVE_DPPD (6U) /*!< Bit position for USB_OBSERVE_DPPD. */ +#define BM_USB_OBSERVE_DPPD (0x40U) /*!< Bit mask for USB_OBSERVE_DPPD. */ +#define BS_USB_OBSERVE_DPPD (1U) /*!< Bit field size in bits for USB_OBSERVE_DPPD. */ + +/*! @brief Read current value of the USB_OBSERVE_DPPD field. */ +#define BR_USB_OBSERVE_DPPD(x) (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR(x), BP_USB_OBSERVE_DPPD)) +/*@}*/ + +/*! + * @name Register USB_OBSERVE, field DPPU[7] (RO) + * + * Provides observability of the D+ Pullup enable at the USB transceiver. + * + * Values: + * - 0 - D+ pullup disabled. + * - 1 - D+ pullup enabled. + */ +/*@{*/ +#define BP_USB_OBSERVE_DPPU (7U) /*!< Bit position for USB_OBSERVE_DPPU. */ +#define BM_USB_OBSERVE_DPPU (0x80U) /*!< Bit mask for USB_OBSERVE_DPPU. */ +#define BS_USB_OBSERVE_DPPU (1U) /*!< Bit field size in bits for USB_OBSERVE_DPPU. */ + +/*! @brief Read current value of the USB_OBSERVE_DPPU field. */ +#define BR_USB_OBSERVE_DPPU(x) (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR(x), BP_USB_OBSERVE_DPPU)) +/*@}*/ + +/******************************************************************************* + * HW_USB_CONTROL - USB OTG Control register + ******************************************************************************/ + +/*! + * @brief HW_USB_CONTROL - USB OTG Control register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_usb_control +{ + uint8_t U; + struct _hw_usb_control_bitfields + { + uint8_t RESERVED0 : 4; /*!< [3:0] */ + uint8_t DPPULLUPNONOTG : 1; /*!< [4] */ + uint8_t RESERVED1 : 3; /*!< [7:5] */ + } B; +} hw_usb_control_t; + +/*! + * @name Constants and macros for entire USB_CONTROL register + */ +/*@{*/ +#define HW_USB_CONTROL_ADDR(x) ((x) + 0x108U) + +#define HW_USB_CONTROL(x) (*(__IO hw_usb_control_t *) HW_USB_CONTROL_ADDR(x)) +#define HW_USB_CONTROL_RD(x) (HW_USB_CONTROL(x).U) +#define HW_USB_CONTROL_WR(x, v) (HW_USB_CONTROL(x).U = (v)) +#define HW_USB_CONTROL_SET(x, v) (HW_USB_CONTROL_WR(x, HW_USB_CONTROL_RD(x) | (v))) +#define HW_USB_CONTROL_CLR(x, v) (HW_USB_CONTROL_WR(x, HW_USB_CONTROL_RD(x) & ~(v))) +#define HW_USB_CONTROL_TOG(x, v) (HW_USB_CONTROL_WR(x, HW_USB_CONTROL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_CONTROL bitfields + */ + +/*! + * @name Register USB_CONTROL, field DPPULLUPNONOTG[4] (RW) + * + * Provides control of the DP Pullup in USBOTG, if USB is configured in non-OTG + * device mode. + * + * Values: + * - 0 - DP Pullup in non-OTG device mode is not enabled. + * - 1 - DP Pullup in non-OTG device mode is enabled. + */ +/*@{*/ +#define BP_USB_CONTROL_DPPULLUPNONOTG (4U) /*!< Bit position for USB_CONTROL_DPPULLUPNONOTG. */ +#define BM_USB_CONTROL_DPPULLUPNONOTG (0x10U) /*!< Bit mask for USB_CONTROL_DPPULLUPNONOTG. */ +#define BS_USB_CONTROL_DPPULLUPNONOTG (1U) /*!< Bit field size in bits for USB_CONTROL_DPPULLUPNONOTG. */ + +/*! @brief Read current value of the USB_CONTROL_DPPULLUPNONOTG field. */ +#define BR_USB_CONTROL_DPPULLUPNONOTG(x) (BITBAND_ACCESS8(HW_USB_CONTROL_ADDR(x), BP_USB_CONTROL_DPPULLUPNONOTG)) + +/*! @brief Format value for bitfield USB_CONTROL_DPPULLUPNONOTG. */ +#define BF_USB_CONTROL_DPPULLUPNONOTG(v) ((uint8_t)((uint8_t)(v) << BP_USB_CONTROL_DPPULLUPNONOTG) & BM_USB_CONTROL_DPPULLUPNONOTG) + +/*! @brief Set the DPPULLUPNONOTG field to a new value. */ +#define BW_USB_CONTROL_DPPULLUPNONOTG(x, v) (BITBAND_ACCESS8(HW_USB_CONTROL_ADDR(x), BP_USB_CONTROL_DPPULLUPNONOTG) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_USBTRC0 - USB Transceiver Control register 0 + ******************************************************************************/ + +/*! + * @brief HW_USB_USBTRC0 - USB Transceiver Control register 0 (RW) + * + * Reset value: 0x00U + * + * Includes signals for basic operation of the on-chip USB Full Speed + * transceiver and configuration of the USB data connection that are not otherwise included + * in the USB Full Speed controller registers. + */ +typedef union _hw_usb_usbtrc0 +{ + uint8_t U; + struct _hw_usb_usbtrc0_bitfields + { + uint8_t USB_RESUME_INT : 1; /*!< [0] USB Asynchronous Interrupt */ + uint8_t SYNC_DET : 1; /*!< [1] Synchronous USB Interrupt Detect */ + uint8_t USB_CLK_RECOVERY_INT : 1; /*!< [2] Combined USB Clock + * Recovery interrupt status */ + uint8_t RESERVED0 : 2; /*!< [4:3] */ + uint8_t USBRESMEN : 1; /*!< [5] Asynchronous Resume Interrupt Enable + * */ + uint8_t RESERVED1 : 1; /*!< [6] */ + uint8_t USBRESET : 1; /*!< [7] USB Reset */ + } B; +} hw_usb_usbtrc0_t; + +/*! + * @name Constants and macros for entire USB_USBTRC0 register + */ +/*@{*/ +#define HW_USB_USBTRC0_ADDR(x) ((x) + 0x10CU) + +#define HW_USB_USBTRC0(x) (*(__IO hw_usb_usbtrc0_t *) HW_USB_USBTRC0_ADDR(x)) +#define HW_USB_USBTRC0_RD(x) (HW_USB_USBTRC0(x).U) +#define HW_USB_USBTRC0_WR(x, v) (HW_USB_USBTRC0(x).U = (v)) +#define HW_USB_USBTRC0_SET(x, v) (HW_USB_USBTRC0_WR(x, HW_USB_USBTRC0_RD(x) | (v))) +#define HW_USB_USBTRC0_CLR(x, v) (HW_USB_USBTRC0_WR(x, HW_USB_USBTRC0_RD(x) & ~(v))) +#define HW_USB_USBTRC0_TOG(x, v) (HW_USB_USBTRC0_WR(x, HW_USB_USBTRC0_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_USBTRC0 bitfields + */ + +/*! + * @name Register USB_USBTRC0, field USB_RESUME_INT[0] (RO) + * + * Values: + * - 0 - No interrupt was generated. + * - 1 - Interrupt was generated because of the USB asynchronous interrupt. + */ +/*@{*/ +#define BP_USB_USBTRC0_USB_RESUME_INT (0U) /*!< Bit position for USB_USBTRC0_USB_RESUME_INT. */ +#define BM_USB_USBTRC0_USB_RESUME_INT (0x01U) /*!< Bit mask for USB_USBTRC0_USB_RESUME_INT. */ +#define BS_USB_USBTRC0_USB_RESUME_INT (1U) /*!< Bit field size in bits for USB_USBTRC0_USB_RESUME_INT. */ + +/*! @brief Read current value of the USB_USBTRC0_USB_RESUME_INT field. */ +#define BR_USB_USBTRC0_USB_RESUME_INT(x) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR(x), BP_USB_USBTRC0_USB_RESUME_INT)) +/*@}*/ + +/*! + * @name Register USB_USBTRC0, field SYNC_DET[1] (RO) + * + * Values: + * - 0 - Synchronous interrupt has not been detected. + * - 1 - Synchronous interrupt has been detected. + */ +/*@{*/ +#define BP_USB_USBTRC0_SYNC_DET (1U) /*!< Bit position for USB_USBTRC0_SYNC_DET. */ +#define BM_USB_USBTRC0_SYNC_DET (0x02U) /*!< Bit mask for USB_USBTRC0_SYNC_DET. */ +#define BS_USB_USBTRC0_SYNC_DET (1U) /*!< Bit field size in bits for USB_USBTRC0_SYNC_DET. */ + +/*! @brief Read current value of the USB_USBTRC0_SYNC_DET field. */ +#define BR_USB_USBTRC0_SYNC_DET(x) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR(x), BP_USB_USBTRC0_SYNC_DET)) +/*@}*/ + +/*! + * @name Register USB_USBTRC0, field USB_CLK_RECOVERY_INT[2] (RO) + * + * This read-only field will be set to value high at 1'b1 when any of USB clock + * recovery interrupt conditions are detected and those interrupts are unmasked. + * For customer use the only unmasked USB clock recovery interrupt condition + * results from an overflow of the frequency trim setting values indicating that the + * frequency trim calculated is out of the adjustment range of the IRC48M output + * clock. To clear this bit after it has been set, Write 0xFF to register + * USB_CLK_RECOVER_INT_STATUS. + */ +/*@{*/ +#define BP_USB_USBTRC0_USB_CLK_RECOVERY_INT (2U) /*!< Bit position for USB_USBTRC0_USB_CLK_RECOVERY_INT. */ +#define BM_USB_USBTRC0_USB_CLK_RECOVERY_INT (0x04U) /*!< Bit mask for USB_USBTRC0_USB_CLK_RECOVERY_INT. */ +#define BS_USB_USBTRC0_USB_CLK_RECOVERY_INT (1U) /*!< Bit field size in bits for USB_USBTRC0_USB_CLK_RECOVERY_INT. */ + +/*! @brief Read current value of the USB_USBTRC0_USB_CLK_RECOVERY_INT field. */ +#define BR_USB_USBTRC0_USB_CLK_RECOVERY_INT(x) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR(x), BP_USB_USBTRC0_USB_CLK_RECOVERY_INT)) +/*@}*/ + +/*! + * @name Register USB_USBTRC0, field USBRESMEN[5] (RW) + * + * This bit, when set, allows the USB module to send an asynchronous wakeup + * event to the MCU upon detection of resume signaling on the USB bus. The MCU then + * re-enables clocks to the USB module. It is used for low-power suspend mode when + * USB module clocks are stopped or the USB transceiver is in Suspend mode. + * Async wakeup only works in device mode. + * + * Values: + * - 0 - USB asynchronous wakeup from suspend mode disabled. + * - 1 - USB asynchronous wakeup from suspend mode enabled. The asynchronous + * resume interrupt differs from the synchronous resume interrupt in that it + * asynchronously detects K-state using the unfiltered state of the D+ and D- + * pins. This interrupt should only be enabled when the Transceiver is + * suspended. + */ +/*@{*/ +#define BP_USB_USBTRC0_USBRESMEN (5U) /*!< Bit position for USB_USBTRC0_USBRESMEN. */ +#define BM_USB_USBTRC0_USBRESMEN (0x20U) /*!< Bit mask for USB_USBTRC0_USBRESMEN. */ +#define BS_USB_USBTRC0_USBRESMEN (1U) /*!< Bit field size in bits for USB_USBTRC0_USBRESMEN. */ + +/*! @brief Read current value of the USB_USBTRC0_USBRESMEN field. */ +#define BR_USB_USBTRC0_USBRESMEN(x) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR(x), BP_USB_USBTRC0_USBRESMEN)) + +/*! @brief Format value for bitfield USB_USBTRC0_USBRESMEN. */ +#define BF_USB_USBTRC0_USBRESMEN(v) ((uint8_t)((uint8_t)(v) << BP_USB_USBTRC0_USBRESMEN) & BM_USB_USBTRC0_USBRESMEN) + +/*! @brief Set the USBRESMEN field to a new value. */ +#define BW_USB_USBTRC0_USBRESMEN(x, v) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR(x), BP_USB_USBTRC0_USBRESMEN) = (v)) +/*@}*/ + +/*! + * @name Register USB_USBTRC0, field USBRESET[7] (WO) + * + * Generates a hard reset to USBOTG. After this bit is set and the reset occurs, + * this bit is automatically cleared. This bit is always read as zero. Wait two + * USB clock cycles after setting this bit. + * + * Values: + * - 0 - Normal USB module operation. + * - 1 - Returns the USB module to its reset state. + */ +/*@{*/ +#define BP_USB_USBTRC0_USBRESET (7U) /*!< Bit position for USB_USBTRC0_USBRESET. */ +#define BM_USB_USBTRC0_USBRESET (0x80U) /*!< Bit mask for USB_USBTRC0_USBRESET. */ +#define BS_USB_USBTRC0_USBRESET (1U) /*!< Bit field size in bits for USB_USBTRC0_USBRESET. */ + +/*! @brief Format value for bitfield USB_USBTRC0_USBRESET. */ +#define BF_USB_USBTRC0_USBRESET(v) ((uint8_t)((uint8_t)(v) << BP_USB_USBTRC0_USBRESET) & BM_USB_USBTRC0_USBRESET) +/*@}*/ + +/******************************************************************************* + * HW_USB_USBFRMADJUST - Frame Adjust Register + ******************************************************************************/ + +/*! + * @brief HW_USB_USBFRMADJUST - Frame Adjust Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_usb_usbfrmadjust +{ + uint8_t U; + struct _hw_usb_usbfrmadjust_bitfields + { + uint8_t ADJ : 8; /*!< [7:0] Frame Adjustment */ + } B; +} hw_usb_usbfrmadjust_t; + +/*! + * @name Constants and macros for entire USB_USBFRMADJUST register + */ +/*@{*/ +#define HW_USB_USBFRMADJUST_ADDR(x) ((x) + 0x114U) + +#define HW_USB_USBFRMADJUST(x) (*(__IO hw_usb_usbfrmadjust_t *) HW_USB_USBFRMADJUST_ADDR(x)) +#define HW_USB_USBFRMADJUST_RD(x) (HW_USB_USBFRMADJUST(x).U) +#define HW_USB_USBFRMADJUST_WR(x, v) (HW_USB_USBFRMADJUST(x).U = (v)) +#define HW_USB_USBFRMADJUST_SET(x, v) (HW_USB_USBFRMADJUST_WR(x, HW_USB_USBFRMADJUST_RD(x) | (v))) +#define HW_USB_USBFRMADJUST_CLR(x, v) (HW_USB_USBFRMADJUST_WR(x, HW_USB_USBFRMADJUST_RD(x) & ~(v))) +#define HW_USB_USBFRMADJUST_TOG(x, v) (HW_USB_USBFRMADJUST_WR(x, HW_USB_USBFRMADJUST_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_USBFRMADJUST bitfields + */ + +/*! + * @name Register USB_USBFRMADJUST, field ADJ[7:0] (RW) + * + * In Host mode, the frame adjustment is a twos complement number that adjusts + * the period of each USB frame in 12-MHz clock periods. A SOF is normally + * generated every 12,000 12-MHz clock cycles. The Frame Adjust Register can adjust this + * by -128 to +127 to compensate for inaccuracies in the USB 48-MHz clock. + * Changes to the ADJ bit take effect at the next start of the next frame. + */ +/*@{*/ +#define BP_USB_USBFRMADJUST_ADJ (0U) /*!< Bit position for USB_USBFRMADJUST_ADJ. */ +#define BM_USB_USBFRMADJUST_ADJ (0xFFU) /*!< Bit mask for USB_USBFRMADJUST_ADJ. */ +#define BS_USB_USBFRMADJUST_ADJ (8U) /*!< Bit field size in bits for USB_USBFRMADJUST_ADJ. */ + +/*! @brief Read current value of the USB_USBFRMADJUST_ADJ field. */ +#define BR_USB_USBFRMADJUST_ADJ(x) (HW_USB_USBFRMADJUST(x).U) + +/*! @brief Format value for bitfield USB_USBFRMADJUST_ADJ. */ +#define BF_USB_USBFRMADJUST_ADJ(v) ((uint8_t)((uint8_t)(v) << BP_USB_USBFRMADJUST_ADJ) & BM_USB_USBFRMADJUST_ADJ) + +/*! @brief Set the ADJ field to a new value. */ +#define BW_USB_USBFRMADJUST_ADJ(x, v) (HW_USB_USBFRMADJUST_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control + ******************************************************************************/ + +/*! + * @brief HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control (RW) + * + * Reset value: 0x00U + * + * Signals in this register control the crystal-less USB clock mode in which the + * internal IRC48M oscillator is tuned to match the clock extracted from the + * incoming USB data stream. The IRC48M internal oscillator module must be enabled + * in register USB_CLK_RECOVER_IRC_EN for this mode. + */ +typedef union _hw_usb_clk_recover_ctrl +{ + uint8_t U; + struct _hw_usb_clk_recover_ctrl_bitfields + { + uint8_t RESERVED0 : 5; /*!< [4:0] */ + uint8_t RESTART_IFRTRIM_EN : 1; /*!< [5] Restart from IFR trim value + * */ + uint8_t RESET_RESUME_ROUGH_EN : 1; /*!< [6] Reset/resume to rough + * phase enable */ + uint8_t CLOCK_RECOVER_EN : 1; /*!< [7] Crystal-less USB enable */ + } B; +} hw_usb_clk_recover_ctrl_t; + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_CTRL register + */ +/*@{*/ +#define HW_USB_CLK_RECOVER_CTRL_ADDR(x) ((x) + 0x140U) + +#define HW_USB_CLK_RECOVER_CTRL(x) (*(__IO hw_usb_clk_recover_ctrl_t *) HW_USB_CLK_RECOVER_CTRL_ADDR(x)) +#define HW_USB_CLK_RECOVER_CTRL_RD(x) (HW_USB_CLK_RECOVER_CTRL(x).U) +#define HW_USB_CLK_RECOVER_CTRL_WR(x, v) (HW_USB_CLK_RECOVER_CTRL(x).U = (v)) +#define HW_USB_CLK_RECOVER_CTRL_SET(x, v) (HW_USB_CLK_RECOVER_CTRL_WR(x, HW_USB_CLK_RECOVER_CTRL_RD(x) | (v))) +#define HW_USB_CLK_RECOVER_CTRL_CLR(x, v) (HW_USB_CLK_RECOVER_CTRL_WR(x, HW_USB_CLK_RECOVER_CTRL_RD(x) & ~(v))) +#define HW_USB_CLK_RECOVER_CTRL_TOG(x, v) (HW_USB_CLK_RECOVER_CTRL_WR(x, HW_USB_CLK_RECOVER_CTRL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_CLK_RECOVER_CTRL bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field RESTART_IFRTRIM_EN[5] (RW) + * + * IRC48 has a default trim fine value whose default value is factory trimmed + * (the IFR trim value). Clock recover block tracks the accuracy of the clock 48Mhz + * and keeps updating the trim fine value accordingly + * + * Values: + * - 0 - Trim fine adjustment always works based on the previous updated trim + * fine value (default) + * - 1 - Trim fine restarts from the IFR trim value whenever + * bus_reset/bus_resume is detected or module enable is desasserted + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (5U) /*!< Bit position for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. */ +#define BM_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (0x20U) /*!< Bit mask for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. */ +#define BS_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN field. */ +#define BR_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. */ +#define BF_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN) & BM_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN) + +/*! @brief Set the RESTART_IFRTRIM_EN field to a new value. */ +#define BW_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN) = (v)) +/*@}*/ + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field RESET_RESUME_ROUGH_EN[6] (RW) + * + * The clock recovery block tracks the IRC48Mhz to get an accurate 48Mhz clock. + * It has two phases after user enables clock_recover_en bit, rough phase and + * tracking phase. The step to fine tune the IRC 48Mhz by adjusting the trim fine + * value is different during these two phases. The step in rough phase is larger + * than that in tracking phase. Switch back to rough stage whenever USB bus reset + * or bus resume occurs. + * + * Values: + * - 0 - Always works in tracking phase after the 1st time rough to track + * transition (default) + * - 1 - Go back to rough stage whenever bus reset or bus resume occurs + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (6U) /*!< Bit position for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. */ +#define BM_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (0x40U) /*!< Bit mask for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. */ +#define BS_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN field. */ +#define BR_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. */ +#define BF_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN) & BM_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN) + +/*! @brief Set the RESET_RESUME_ROUGH_EN field to a new value. */ +#define BW_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN) = (v)) +/*@}*/ + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field CLOCK_RECOVER_EN[7] (RW) + * + * This bit must be enabled if user wants to use the crystal-less USB mode for + * the Full Speed USB controller and transceiver. This bit should not be set for + * USB host mode or OTG. + * + * Values: + * - 0 - Disable clock recovery block (default) + * - 1 - Enable clock recovery block + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (7U) /*!< Bit position for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. */ +#define BM_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (0x80U) /*!< Bit mask for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. */ +#define BS_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN field. */ +#define BR_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. */ +#define BF_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN) & BM_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN) + +/*! @brief Set the CLOCK_RECOVER_EN field to a new value. */ +#define BW_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR(x), BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register + ******************************************************************************/ + +/*! + * @brief HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register (RW) + * + * Reset value: 0x01U + * + * Controls basic operation of the on-chip IRC48M module used to produce nominal + * 48MHz clocks for USB crystal-less operation and other functions. See + * additional information about the IRC48M operation in the Clock Distribution chapter. + */ +typedef union _hw_usb_clk_recover_irc_en +{ + uint8_t U; + struct _hw_usb_clk_recover_irc_en_bitfields + { + uint8_t REG_EN : 1; /*!< [0] IRC48M regulator enable */ + uint8_t IRC_EN : 1; /*!< [1] IRC48M enable */ + uint8_t RESERVED0 : 6; /*!< [7:2] */ + } B; +} hw_usb_clk_recover_irc_en_t; + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_IRC_EN register + */ +/*@{*/ +#define HW_USB_CLK_RECOVER_IRC_EN_ADDR(x) ((x) + 0x144U) + +#define HW_USB_CLK_RECOVER_IRC_EN(x) (*(__IO hw_usb_clk_recover_irc_en_t *) HW_USB_CLK_RECOVER_IRC_EN_ADDR(x)) +#define HW_USB_CLK_RECOVER_IRC_EN_RD(x) (HW_USB_CLK_RECOVER_IRC_EN(x).U) +#define HW_USB_CLK_RECOVER_IRC_EN_WR(x, v) (HW_USB_CLK_RECOVER_IRC_EN(x).U = (v)) +#define HW_USB_CLK_RECOVER_IRC_EN_SET(x, v) (HW_USB_CLK_RECOVER_IRC_EN_WR(x, HW_USB_CLK_RECOVER_IRC_EN_RD(x) | (v))) +#define HW_USB_CLK_RECOVER_IRC_EN_CLR(x, v) (HW_USB_CLK_RECOVER_IRC_EN_WR(x, HW_USB_CLK_RECOVER_IRC_EN_RD(x) & ~(v))) +#define HW_USB_CLK_RECOVER_IRC_EN_TOG(x, v) (HW_USB_CLK_RECOVER_IRC_EN_WR(x, HW_USB_CLK_RECOVER_IRC_EN_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_CLK_RECOVER_IRC_EN bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_IRC_EN, field REG_EN[0] (RW) + * + * This bit is used to enable the local analog regulator for IRC48Mhz module. + * This bit must be set if user wants to use the crystal-less USB clock + * configuration. + * + * Values: + * - 0 - IRC48M local regulator is disabled + * - 1 - IRC48M local regulator is enabled (default) + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_IRC_EN_REG_EN (0U) /*!< Bit position for USB_CLK_RECOVER_IRC_EN_REG_EN. */ +#define BM_USB_CLK_RECOVER_IRC_EN_REG_EN (0x01U) /*!< Bit mask for USB_CLK_RECOVER_IRC_EN_REG_EN. */ +#define BS_USB_CLK_RECOVER_IRC_EN_REG_EN (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_IRC_EN_REG_EN. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_IRC_EN_REG_EN field. */ +#define BR_USB_CLK_RECOVER_IRC_EN_REG_EN(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR(x), BP_USB_CLK_RECOVER_IRC_EN_REG_EN)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_IRC_EN_REG_EN. */ +#define BF_USB_CLK_RECOVER_IRC_EN_REG_EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_IRC_EN_REG_EN) & BM_USB_CLK_RECOVER_IRC_EN_REG_EN) + +/*! @brief Set the REG_EN field to a new value. */ +#define BW_USB_CLK_RECOVER_IRC_EN_REG_EN(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR(x), BP_USB_CLK_RECOVER_IRC_EN_REG_EN) = (v)) +/*@}*/ + +/*! + * @name Register USB_CLK_RECOVER_IRC_EN, field IRC_EN[1] (RW) + * + * This bit is used to enable the on-chip IRC48Mhz module to generate clocks for + * crystal-less USB. It can only be used for FS USB device mode operation. This + * bit must be set before using the crystal-less USB clock configuration. + * + * Values: + * - 0 - Disable the IRC48M module (default) + * - 1 - Enable the IRC48M module + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_IRC_EN_IRC_EN (1U) /*!< Bit position for USB_CLK_RECOVER_IRC_EN_IRC_EN. */ +#define BM_USB_CLK_RECOVER_IRC_EN_IRC_EN (0x02U) /*!< Bit mask for USB_CLK_RECOVER_IRC_EN_IRC_EN. */ +#define BS_USB_CLK_RECOVER_IRC_EN_IRC_EN (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_IRC_EN_IRC_EN. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_IRC_EN_IRC_EN field. */ +#define BR_USB_CLK_RECOVER_IRC_EN_IRC_EN(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR(x), BP_USB_CLK_RECOVER_IRC_EN_IRC_EN)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_IRC_EN_IRC_EN. */ +#define BF_USB_CLK_RECOVER_IRC_EN_IRC_EN(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_IRC_EN_IRC_EN) & BM_USB_CLK_RECOVER_IRC_EN_IRC_EN) + +/*! @brief Set the IRC_EN field to a new value. */ +#define BW_USB_CLK_RECOVER_IRC_EN_IRC_EN(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR(x), BP_USB_CLK_RECOVER_IRC_EN_IRC_EN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status + ******************************************************************************/ + +/*! + * @brief HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status (W1C) + * + * Reset value: 0x00U + * + * A Write operation with value high at 1'b1 on any combination of individual + * bits will clear those bits. + */ +typedef union _hw_usb_clk_recover_int_status +{ + uint8_t U; + struct _hw_usb_clk_recover_int_status_bitfields + { + uint8_t RESERVED0 : 4; /*!< [3:0] */ + uint8_t OVF_ERROR : 1; /*!< [4] */ + uint8_t RESERVED1 : 3; /*!< [7:5] */ + } B; +} hw_usb_clk_recover_int_status_t; + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_INT_STATUS register + */ +/*@{*/ +#define HW_USB_CLK_RECOVER_INT_STATUS_ADDR(x) ((x) + 0x15CU) + +#define HW_USB_CLK_RECOVER_INT_STATUS(x) (*(__IO hw_usb_clk_recover_int_status_t *) HW_USB_CLK_RECOVER_INT_STATUS_ADDR(x)) +#define HW_USB_CLK_RECOVER_INT_STATUS_RD(x) (HW_USB_CLK_RECOVER_INT_STATUS(x).U) +#define HW_USB_CLK_RECOVER_INT_STATUS_WR(x, v) (HW_USB_CLK_RECOVER_INT_STATUS(x).U = (v)) +#define HW_USB_CLK_RECOVER_INT_STATUS_SET(x, v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(x, HW_USB_CLK_RECOVER_INT_STATUS_RD(x) | (v))) +#define HW_USB_CLK_RECOVER_INT_STATUS_CLR(x, v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(x, HW_USB_CLK_RECOVER_INT_STATUS_RD(x) & ~(v))) +#define HW_USB_CLK_RECOVER_INT_STATUS_TOG(x, v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(x, HW_USB_CLK_RECOVER_INT_STATUS_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual USB_CLK_RECOVER_INT_STATUS bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_INT_STATUS, field OVF_ERROR[4] (W1C) + * + * Indicates that the USB clock recovery algorithm has detected that the + * frequency trim adjustment needed for the IRC48M output clock is outside the available + * TRIM_FINE adjustment range for the IRC48M module. + * + * Values: + * - 0 - No interrupt is reported + * - 1 - Unmasked interrupt has been generated + */ +/*@{*/ +#define BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (4U) /*!< Bit position for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. */ +#define BM_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (0x10U) /*!< Bit mask for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. */ +#define BS_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (1U) /*!< Bit field size in bits for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. */ + +/*! @brief Read current value of the USB_CLK_RECOVER_INT_STATUS_OVF_ERROR field. */ +#define BR_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR(x) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_INT_STATUS_ADDR(x), BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR)) + +/*! @brief Format value for bitfield USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. */ +#define BF_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR(v) ((uint8_t)((uint8_t)(v) << BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR) & BM_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR) + +/*! @brief Set the OVF_ERROR field to a new value. */ +#define BW_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR(x, v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_INT_STATUS_ADDR(x), BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_usb_t - module struct + ******************************************************************************/ +/*! + * @brief All USB module registers. + */ +#pragma pack(1) +typedef struct _hw_usb +{ + __I hw_usb_perid_t PERID; /*!< [0x0] Peripheral ID register */ + uint8_t _reserved0[3]; + __I hw_usb_idcomp_t IDCOMP; /*!< [0x4] Peripheral ID Complement register */ + uint8_t _reserved1[3]; + __I hw_usb_rev_t REV; /*!< [0x8] Peripheral Revision register */ + uint8_t _reserved2[3]; + __I hw_usb_addinfo_t ADDINFO; /*!< [0xC] Peripheral Additional Info register */ + uint8_t _reserved3[3]; + __IO hw_usb_otgistat_t OTGISTAT; /*!< [0x10] OTG Interrupt Status register */ + uint8_t _reserved4[3]; + __IO hw_usb_otgicr_t OTGICR; /*!< [0x14] OTG Interrupt Control register */ + uint8_t _reserved5[3]; + __IO hw_usb_otgstat_t OTGSTAT; /*!< [0x18] OTG Status register */ + uint8_t _reserved6[3]; + __IO hw_usb_otgctl_t OTGCTL; /*!< [0x1C] OTG Control register */ + uint8_t _reserved7[99]; + __IO hw_usb_istat_t ISTAT; /*!< [0x80] Interrupt Status register */ + uint8_t _reserved8[3]; + __IO hw_usb_inten_t INTEN; /*!< [0x84] Interrupt Enable register */ + uint8_t _reserved9[3]; + __IO hw_usb_errstat_t ERRSTAT; /*!< [0x88] Error Interrupt Status register */ + uint8_t _reserved10[3]; + __IO hw_usb_erren_t ERREN; /*!< [0x8C] Error Interrupt Enable register */ + uint8_t _reserved11[3]; + __I hw_usb_stat_t STAT; /*!< [0x90] Status register */ + uint8_t _reserved12[3]; + __IO hw_usb_ctl_t CTL; /*!< [0x94] Control register */ + uint8_t _reserved13[3]; + __IO hw_usb_addr_t ADDR; /*!< [0x98] Address register */ + uint8_t _reserved14[3]; + __IO hw_usb_bdtpage1_t BDTPAGE1; /*!< [0x9C] BDT Page register 1 */ + uint8_t _reserved15[3]; + __IO hw_usb_frmnuml_t FRMNUML; /*!< [0xA0] Frame Number register Low */ + uint8_t _reserved16[3]; + __IO hw_usb_frmnumh_t FRMNUMH; /*!< [0xA4] Frame Number register High */ + uint8_t _reserved17[3]; + __IO hw_usb_token_t TOKEN; /*!< [0xA8] Token register */ + uint8_t _reserved18[3]; + __IO hw_usb_softhld_t SOFTHLD; /*!< [0xAC] SOF Threshold register */ + uint8_t _reserved19[3]; + __IO hw_usb_bdtpage2_t BDTPAGE2; /*!< [0xB0] BDT Page Register 2 */ + uint8_t _reserved20[3]; + __IO hw_usb_bdtpage3_t BDTPAGE3; /*!< [0xB4] BDT Page Register 3 */ + uint8_t _reserved21[11]; + struct { + __IO hw_usb_endptn_t ENDPTn; /*!< [0xC0] Endpoint Control register */ + uint8_t _reserved0[3]; + } ENDPOINT[16]; + __IO hw_usb_usbctrl_t USBCTRL; /*!< [0x100] USB Control register */ + uint8_t _reserved22[3]; + __I hw_usb_observe_t OBSERVE; /*!< [0x104] USB OTG Observe register */ + uint8_t _reserved23[3]; + __IO hw_usb_control_t CONTROL; /*!< [0x108] USB OTG Control register */ + uint8_t _reserved24[3]; + __IO hw_usb_usbtrc0_t USBTRC0; /*!< [0x10C] USB Transceiver Control register 0 */ + uint8_t _reserved25[7]; + __IO hw_usb_usbfrmadjust_t USBFRMADJUST; /*!< [0x114] Frame Adjust Register */ + uint8_t _reserved26[43]; + __IO hw_usb_clk_recover_ctrl_t CLK_RECOVER_CTRL; /*!< [0x140] USB Clock recovery control */ + uint8_t _reserved27[3]; + __IO hw_usb_clk_recover_irc_en_t CLK_RECOVER_IRC_EN; /*!< [0x144] IRC48M oscillator enable register */ + uint8_t _reserved28[23]; + __IO hw_usb_clk_recover_int_status_t CLK_RECOVER_INT_STATUS; /*!< [0x15C] Clock recovery separated interrupt status */ +} hw_usb_t; +#pragma pack() + +/*! @brief Macro to access all USB registers. */ +/*! @param x USB module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_USB(USB0_BASE)</code>. */ +#define HW_USB(x) (*(hw_usb_t *)(x)) + +#endif /* __HW_USB_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_vref.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_vref.h new file mode 100644 index 0000000000..c9030e9d62 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_vref.h @@ -0,0 +1,384 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_VREF_REGISTERS_H__ +#define __HW_VREF_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 VREF + * + * Voltage Reference + * + * Registers defined in this header file: + * - HW_VREF_TRM - VREF Trim Register + * - HW_VREF_SC - VREF Status and Control Register + * + * - hw_vref_t - Struct containing all module registers. + */ + +#define HW_VREF_INSTANCE_COUNT (1U) /*!< Number of instances of the VREF module. */ + +/******************************************************************************* + * HW_VREF_TRM - VREF Trim Register + ******************************************************************************/ + +/*! + * @brief HW_VREF_TRM - VREF Trim Register (RW) + * + * Reset value: 0x00U + * + * This register contains bits that contain the trim data for the Voltage + * Reference. + */ +typedef union _hw_vref_trm +{ + uint8_t U; + struct _hw_vref_trm_bitfields + { + uint8_t TRIM : 6; /*!< [5:0] Trim bits */ + uint8_t CHOPEN : 1; /*!< [6] Chop oscillator enable. When set, + * internal chopping operation is enabled and the internal analog offset will be + * minimized. */ + uint8_t RESERVED0 : 1; /*!< [7] */ + } B; +} hw_vref_trm_t; + +/*! + * @name Constants and macros for entire VREF_TRM register + */ +/*@{*/ +#define HW_VREF_TRM_ADDR(x) ((x) + 0x0U) + +#define HW_VREF_TRM(x) (*(__IO hw_vref_trm_t *) HW_VREF_TRM_ADDR(x)) +#define HW_VREF_TRM_RD(x) (HW_VREF_TRM(x).U) +#define HW_VREF_TRM_WR(x, v) (HW_VREF_TRM(x).U = (v)) +#define HW_VREF_TRM_SET(x, v) (HW_VREF_TRM_WR(x, HW_VREF_TRM_RD(x) | (v))) +#define HW_VREF_TRM_CLR(x, v) (HW_VREF_TRM_WR(x, HW_VREF_TRM_RD(x) & ~(v))) +#define HW_VREF_TRM_TOG(x, v) (HW_VREF_TRM_WR(x, HW_VREF_TRM_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual VREF_TRM bitfields + */ + +/*! + * @name Register VREF_TRM, field TRIM[5:0] (RW) + * + * These bits change the resulting VREF by approximately +/- 0.5 mV for each + * step. Min = minimum and max = maximum voltage reference output. For minimum and + * maximum voltage reference output values, refer to the Data Sheet for this chip. + * + * Values: + * - 000000 - Min + * - 111111 - Max + */ +/*@{*/ +#define BP_VREF_TRM_TRIM (0U) /*!< Bit position for VREF_TRM_TRIM. */ +#define BM_VREF_TRM_TRIM (0x3FU) /*!< Bit mask for VREF_TRM_TRIM. */ +#define BS_VREF_TRM_TRIM (6U) /*!< Bit field size in bits for VREF_TRM_TRIM. */ + +/*! @brief Read current value of the VREF_TRM_TRIM field. */ +#define BR_VREF_TRM_TRIM(x) (HW_VREF_TRM(x).B.TRIM) + +/*! @brief Format value for bitfield VREF_TRM_TRIM. */ +#define BF_VREF_TRM_TRIM(v) ((uint8_t)((uint8_t)(v) << BP_VREF_TRM_TRIM) & BM_VREF_TRM_TRIM) + +/*! @brief Set the TRIM field to a new value. */ +#define BW_VREF_TRM_TRIM(x, v) (HW_VREF_TRM_WR(x, (HW_VREF_TRM_RD(x) & ~BM_VREF_TRM_TRIM) | BF_VREF_TRM_TRIM(v))) +/*@}*/ + +/*! + * @name Register VREF_TRM, field CHOPEN[6] (RW) + * + * This bit is set during factory trimming of the VREF voltage. This bit should + * be written to 1 to achieve the performance stated in the data sheet. + * + * Values: + * - 0 - Chop oscillator is disabled. + * - 1 - Chop oscillator is enabled. + */ +/*@{*/ +#define BP_VREF_TRM_CHOPEN (6U) /*!< Bit position for VREF_TRM_CHOPEN. */ +#define BM_VREF_TRM_CHOPEN (0x40U) /*!< Bit mask for VREF_TRM_CHOPEN. */ +#define BS_VREF_TRM_CHOPEN (1U) /*!< Bit field size in bits for VREF_TRM_CHOPEN. */ + +/*! @brief Read current value of the VREF_TRM_CHOPEN field. */ +#define BR_VREF_TRM_CHOPEN(x) (BITBAND_ACCESS8(HW_VREF_TRM_ADDR(x), BP_VREF_TRM_CHOPEN)) + +/*! @brief Format value for bitfield VREF_TRM_CHOPEN. */ +#define BF_VREF_TRM_CHOPEN(v) ((uint8_t)((uint8_t)(v) << BP_VREF_TRM_CHOPEN) & BM_VREF_TRM_CHOPEN) + +/*! @brief Set the CHOPEN field to a new value. */ +#define BW_VREF_TRM_CHOPEN(x, v) (BITBAND_ACCESS8(HW_VREF_TRM_ADDR(x), BP_VREF_TRM_CHOPEN) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_VREF_SC - VREF Status and Control Register + ******************************************************************************/ + +/*! + * @brief HW_VREF_SC - VREF Status and Control Register (RW) + * + * Reset value: 0x00U + * + * This register contains the control bits used to enable the internal voltage + * reference and to select the buffer mode to be used. + */ +typedef union _hw_vref_sc +{ + uint8_t U; + struct _hw_vref_sc_bitfields + { + uint8_t MODE_LV : 2; /*!< [1:0] Buffer Mode selection */ + uint8_t VREFST : 1; /*!< [2] Internal Voltage Reference stable */ + uint8_t RESERVED0 : 2; /*!< [4:3] */ + uint8_t ICOMPEN : 1; /*!< [5] Second order curvature compensation + * enable */ + uint8_t REGEN : 1; /*!< [6] Regulator enable */ + uint8_t VREFEN : 1; /*!< [7] Internal Voltage Reference enable */ + } B; +} hw_vref_sc_t; + +/*! + * @name Constants and macros for entire VREF_SC register + */ +/*@{*/ +#define HW_VREF_SC_ADDR(x) ((x) + 0x1U) + +#define HW_VREF_SC(x) (*(__IO hw_vref_sc_t *) HW_VREF_SC_ADDR(x)) +#define HW_VREF_SC_RD(x) (HW_VREF_SC(x).U) +#define HW_VREF_SC_WR(x, v) (HW_VREF_SC(x).U = (v)) +#define HW_VREF_SC_SET(x, v) (HW_VREF_SC_WR(x, HW_VREF_SC_RD(x) | (v))) +#define HW_VREF_SC_CLR(x, v) (HW_VREF_SC_WR(x, HW_VREF_SC_RD(x) & ~(v))) +#define HW_VREF_SC_TOG(x, v) (HW_VREF_SC_WR(x, HW_VREF_SC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual VREF_SC bitfields + */ + +/*! + * @name Register VREF_SC, field MODE_LV[1:0] (RW) + * + * These bits select the buffer modes for the Voltage Reference module. + * + * Values: + * - 00 - Bandgap on only, for stabilization and startup + * - 01 - High power buffer mode enabled + * - 10 - Low-power buffer mode enabled + * - 11 - Reserved + */ +/*@{*/ +#define BP_VREF_SC_MODE_LV (0U) /*!< Bit position for VREF_SC_MODE_LV. */ +#define BM_VREF_SC_MODE_LV (0x03U) /*!< Bit mask for VREF_SC_MODE_LV. */ +#define BS_VREF_SC_MODE_LV (2U) /*!< Bit field size in bits for VREF_SC_MODE_LV. */ + +/*! @brief Read current value of the VREF_SC_MODE_LV field. */ +#define BR_VREF_SC_MODE_LV(x) (HW_VREF_SC(x).B.MODE_LV) + +/*! @brief Format value for bitfield VREF_SC_MODE_LV. */ +#define BF_VREF_SC_MODE_LV(v) ((uint8_t)((uint8_t)(v) << BP_VREF_SC_MODE_LV) & BM_VREF_SC_MODE_LV) + +/*! @brief Set the MODE_LV field to a new value. */ +#define BW_VREF_SC_MODE_LV(x, v) (HW_VREF_SC_WR(x, (HW_VREF_SC_RD(x) & ~BM_VREF_SC_MODE_LV) | BF_VREF_SC_MODE_LV(v))) +/*@}*/ + +/*! + * @name Register VREF_SC, field VREFST[2] (RO) + * + * This bit indicates that the bandgap reference within the Voltage Reference + * module has completed its startup and stabilization. + * + * Values: + * - 0 - The module is disabled or not stable. + * - 1 - The module is stable. + */ +/*@{*/ +#define BP_VREF_SC_VREFST (2U) /*!< Bit position for VREF_SC_VREFST. */ +#define BM_VREF_SC_VREFST (0x04U) /*!< Bit mask for VREF_SC_VREFST. */ +#define BS_VREF_SC_VREFST (1U) /*!< Bit field size in bits for VREF_SC_VREFST. */ + +/*! @brief Read current value of the VREF_SC_VREFST field. */ +#define BR_VREF_SC_VREFST(x) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_VREFST)) +/*@}*/ + +/*! + * @name Register VREF_SC, field ICOMPEN[5] (RW) + * + * This bit is set during factory trimming of the VREF voltage. This bit should + * be written to 1 to achieve the performance stated in the data sheet. + * + * Values: + * - 0 - Disabled + * - 1 - Enabled + */ +/*@{*/ +#define BP_VREF_SC_ICOMPEN (5U) /*!< Bit position for VREF_SC_ICOMPEN. */ +#define BM_VREF_SC_ICOMPEN (0x20U) /*!< Bit mask for VREF_SC_ICOMPEN. */ +#define BS_VREF_SC_ICOMPEN (1U) /*!< Bit field size in bits for VREF_SC_ICOMPEN. */ + +/*! @brief Read current value of the VREF_SC_ICOMPEN field. */ +#define BR_VREF_SC_ICOMPEN(x) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_ICOMPEN)) + +/*! @brief Format value for bitfield VREF_SC_ICOMPEN. */ +#define BF_VREF_SC_ICOMPEN(v) ((uint8_t)((uint8_t)(v) << BP_VREF_SC_ICOMPEN) & BM_VREF_SC_ICOMPEN) + +/*! @brief Set the ICOMPEN field to a new value. */ +#define BW_VREF_SC_ICOMPEN(x, v) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_ICOMPEN) = (v)) +/*@}*/ + +/*! + * @name Register VREF_SC, field REGEN[6] (RW) + * + * This bit is used to enable the internal 1.75 V regulator to produce a + * constant internal voltage supply in order to reduce the sensitivity to external + * supply noise and variation. If it is desired to keep the regulator enabled in very + * low power modes, refer to the Chip Configuration details for a description on + * how this can be achieved. This bit is set during factory trimming of the VREF + * voltage. This bit should be written to 1 to achieve the performance stated in + * the data sheet. + * + * Values: + * - 0 - Internal 1.75 V regulator is disabled. + * - 1 - Internal 1.75 V regulator is enabled. + */ +/*@{*/ +#define BP_VREF_SC_REGEN (6U) /*!< Bit position for VREF_SC_REGEN. */ +#define BM_VREF_SC_REGEN (0x40U) /*!< Bit mask for VREF_SC_REGEN. */ +#define BS_VREF_SC_REGEN (1U) /*!< Bit field size in bits for VREF_SC_REGEN. */ + +/*! @brief Read current value of the VREF_SC_REGEN field. */ +#define BR_VREF_SC_REGEN(x) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_REGEN)) + +/*! @brief Format value for bitfield VREF_SC_REGEN. */ +#define BF_VREF_SC_REGEN(v) ((uint8_t)((uint8_t)(v) << BP_VREF_SC_REGEN) & BM_VREF_SC_REGEN) + +/*! @brief Set the REGEN field to a new value. */ +#define BW_VREF_SC_REGEN(x, v) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_REGEN) = (v)) +/*@}*/ + +/*! + * @name Register VREF_SC, field VREFEN[7] (RW) + * + * This bit is used to enable the bandgap reference within the Voltage Reference + * module. After the VREF is enabled, turning off the clock to the VREF module + * via the corresponding clock gate register will not disable the VREF. VREF must + * be disabled via this VREFEN bit. + * + * Values: + * - 0 - The module is disabled. + * - 1 - The module is enabled. + */ +/*@{*/ +#define BP_VREF_SC_VREFEN (7U) /*!< Bit position for VREF_SC_VREFEN. */ +#define BM_VREF_SC_VREFEN (0x80U) /*!< Bit mask for VREF_SC_VREFEN. */ +#define BS_VREF_SC_VREFEN (1U) /*!< Bit field size in bits for VREF_SC_VREFEN. */ + +/*! @brief Read current value of the VREF_SC_VREFEN field. */ +#define BR_VREF_SC_VREFEN(x) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_VREFEN)) + +/*! @brief Format value for bitfield VREF_SC_VREFEN. */ +#define BF_VREF_SC_VREFEN(v) ((uint8_t)((uint8_t)(v) << BP_VREF_SC_VREFEN) & BM_VREF_SC_VREFEN) + +/*! @brief Set the VREFEN field to a new value. */ +#define BW_VREF_SC_VREFEN(x, v) (BITBAND_ACCESS8(HW_VREF_SC_ADDR(x), BP_VREF_SC_VREFEN) = (v)) +/*@}*/ + +/******************************************************************************* + * hw_vref_t - module struct + ******************************************************************************/ +/*! + * @brief All VREF module registers. + */ +#pragma pack(1) +typedef struct _hw_vref +{ + __IO hw_vref_trm_t TRM; /*!< [0x0] VREF Trim Register */ + __IO hw_vref_sc_t SC; /*!< [0x1] VREF Status and Control Register */ +} hw_vref_t; +#pragma pack() + +/*! @brief Macro to access all VREF registers. */ +/*! @param x VREF module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_VREF(VREF_BASE)</code>. */ +#define HW_VREF(x) (*(hw_vref_t *)(x)) + +#endif /* __HW_VREF_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_wdog.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_wdog.h new file mode 100644 index 0000000000..b33990791d --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/MK22F51212_wdog.h @@ -0,0 +1,1153 @@ +/* +** ################################################################### +** Compilers: Keil ARM C/C++ Compiler +** Freescale C/C++ for Embedded ARM +** GNU C Compiler +** IAR ANSI C/C++ Compiler for ARM +** +** Reference manual: K22P121M120SF7RM, Rev. 1, March 24, 2014 +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Extension to the CMSIS register access layer header. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_WDOG_REGISTERS_H__ +#define __HW_WDOG_REGISTERS_H__ + +#include "MK22F51212.h" +#include "fsl_bitaccess.h" + +/* + * MK22F51212 WDOG + * + * Generation 2008 Watchdog Timer + * + * Registers defined in this header file: + * - HW_WDOG_STCTRLH - Watchdog Status and Control Register High + * - HW_WDOG_STCTRLL - Watchdog Status and Control Register Low + * - HW_WDOG_TOVALH - Watchdog Time-out Value Register High + * - HW_WDOG_TOVALL - Watchdog Time-out Value Register Low + * - HW_WDOG_WINH - Watchdog Window Register High + * - HW_WDOG_WINL - Watchdog Window Register Low + * - HW_WDOG_REFRESH - Watchdog Refresh register + * - HW_WDOG_UNLOCK - Watchdog Unlock register + * - HW_WDOG_TMROUTH - Watchdog Timer Output Register High + * - HW_WDOG_TMROUTL - Watchdog Timer Output Register Low + * - HW_WDOG_RSTCNT - Watchdog Reset Count register + * - HW_WDOG_PRESC - Watchdog Prescaler register + * + * - hw_wdog_t - Struct containing all module registers. + */ + +#define HW_WDOG_INSTANCE_COUNT (1U) /*!< Number of instances of the WDOG module. */ + +/******************************************************************************* + * HW_WDOG_STCTRLH - Watchdog Status and Control Register High + ******************************************************************************/ + +/*! + * @brief HW_WDOG_STCTRLH - Watchdog Status and Control Register High (RW) + * + * Reset value: 0x01D3U + */ +typedef union _hw_wdog_stctrlh +{ + uint16_t U; + struct _hw_wdog_stctrlh_bitfields + { + uint16_t WDOGEN : 1; /*!< [0] */ + uint16_t CLKSRC : 1; /*!< [1] */ + uint16_t IRQRSTEN : 1; /*!< [2] */ + uint16_t WINEN : 1; /*!< [3] */ + uint16_t ALLOWUPDATE : 1; /*!< [4] */ + uint16_t DBGEN : 1; /*!< [5] */ + uint16_t STOPEN : 1; /*!< [6] */ + uint16_t WAITEN : 1; /*!< [7] */ + uint16_t RESERVED0 : 2; /*!< [9:8] */ + uint16_t TESTWDOG : 1; /*!< [10] */ + uint16_t TESTSEL : 1; /*!< [11] */ + uint16_t BYTESEL : 2; /*!< [13:12] */ + uint16_t DISTESTWDOG : 1; /*!< [14] */ + uint16_t RESERVED1 : 1; /*!< [15] */ + } B; +} hw_wdog_stctrlh_t; + +/*! + * @name Constants and macros for entire WDOG_STCTRLH register + */ +/*@{*/ +#define HW_WDOG_STCTRLH_ADDR(x) ((x) + 0x0U) + +#define HW_WDOG_STCTRLH(x) (*(__IO hw_wdog_stctrlh_t *) HW_WDOG_STCTRLH_ADDR(x)) +#define HW_WDOG_STCTRLH_RD(x) (HW_WDOG_STCTRLH(x).U) +#define HW_WDOG_STCTRLH_WR(x, v) (HW_WDOG_STCTRLH(x).U = (v)) +#define HW_WDOG_STCTRLH_SET(x, v) (HW_WDOG_STCTRLH_WR(x, HW_WDOG_STCTRLH_RD(x) | (v))) +#define HW_WDOG_STCTRLH_CLR(x, v) (HW_WDOG_STCTRLH_WR(x, HW_WDOG_STCTRLH_RD(x) & ~(v))) +#define HW_WDOG_STCTRLH_TOG(x, v) (HW_WDOG_STCTRLH_WR(x, HW_WDOG_STCTRLH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_STCTRLH bitfields + */ + +/*! + * @name Register WDOG_STCTRLH, field WDOGEN[0] (RW) + * + * Enables or disables the WDOG's operation. In the disabled state, the watchdog + * timer is kept in the reset state, but the other exception conditions can + * still trigger a reset/interrupt. A change in the value of this bit must be held + * for more than one WDOG_CLK cycle for the WDOG to be enabled or disabled. + * + * Values: + * - 0 - WDOG is disabled. + * - 1 - WDOG is enabled. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_WDOGEN (0U) /*!< Bit position for WDOG_STCTRLH_WDOGEN. */ +#define BM_WDOG_STCTRLH_WDOGEN (0x0001U) /*!< Bit mask for WDOG_STCTRLH_WDOGEN. */ +#define BS_WDOG_STCTRLH_WDOGEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_WDOGEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_WDOGEN field. */ +#define BR_WDOG_STCTRLH_WDOGEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WDOGEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_WDOGEN. */ +#define BF_WDOG_STCTRLH_WDOGEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_WDOGEN) & BM_WDOG_STCTRLH_WDOGEN) + +/*! @brief Set the WDOGEN field to a new value. */ +#define BW_WDOG_STCTRLH_WDOGEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WDOGEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field CLKSRC[1] (RW) + * + * Selects clock source for the WDOG timer and other internal timing operations. + * + * Values: + * - 0 - WDOG clock sourced from LPO . + * - 1 - WDOG clock sourced from alternate clock source. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_CLKSRC (1U) /*!< Bit position for WDOG_STCTRLH_CLKSRC. */ +#define BM_WDOG_STCTRLH_CLKSRC (0x0002U) /*!< Bit mask for WDOG_STCTRLH_CLKSRC. */ +#define BS_WDOG_STCTRLH_CLKSRC (1U) /*!< Bit field size in bits for WDOG_STCTRLH_CLKSRC. */ + +/*! @brief Read current value of the WDOG_STCTRLH_CLKSRC field. */ +#define BR_WDOG_STCTRLH_CLKSRC(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_CLKSRC)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_CLKSRC. */ +#define BF_WDOG_STCTRLH_CLKSRC(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_CLKSRC) & BM_WDOG_STCTRLH_CLKSRC) + +/*! @brief Set the CLKSRC field to a new value. */ +#define BW_WDOG_STCTRLH_CLKSRC(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_CLKSRC) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field IRQRSTEN[2] (RW) + * + * Used to enable the debug breadcrumbs feature. A change in this bit is updated + * immediately, as opposed to updating after WCT. + * + * Values: + * - 0 - WDOG time-out generates reset only. + * - 1 - WDOG time-out initially generates an interrupt. After WCT, it generates + * a reset. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_IRQRSTEN (2U) /*!< Bit position for WDOG_STCTRLH_IRQRSTEN. */ +#define BM_WDOG_STCTRLH_IRQRSTEN (0x0004U) /*!< Bit mask for WDOG_STCTRLH_IRQRSTEN. */ +#define BS_WDOG_STCTRLH_IRQRSTEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_IRQRSTEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_IRQRSTEN field. */ +#define BR_WDOG_STCTRLH_IRQRSTEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_IRQRSTEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_IRQRSTEN. */ +#define BF_WDOG_STCTRLH_IRQRSTEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_IRQRSTEN) & BM_WDOG_STCTRLH_IRQRSTEN) + +/*! @brief Set the IRQRSTEN field to a new value. */ +#define BW_WDOG_STCTRLH_IRQRSTEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_IRQRSTEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field WINEN[3] (RW) + * + * Enables Windowing mode. + * + * Values: + * - 0 - Windowing mode is disabled. + * - 1 - Windowing mode is enabled. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_WINEN (3U) /*!< Bit position for WDOG_STCTRLH_WINEN. */ +#define BM_WDOG_STCTRLH_WINEN (0x0008U) /*!< Bit mask for WDOG_STCTRLH_WINEN. */ +#define BS_WDOG_STCTRLH_WINEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_WINEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_WINEN field. */ +#define BR_WDOG_STCTRLH_WINEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WINEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_WINEN. */ +#define BF_WDOG_STCTRLH_WINEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_WINEN) & BM_WDOG_STCTRLH_WINEN) + +/*! @brief Set the WINEN field to a new value. */ +#define BW_WDOG_STCTRLH_WINEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WINEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field ALLOWUPDATE[4] (RW) + * + * Enables updates to watchdog write-once registers, after the reset-triggered + * initial configuration window (WCT) closes, through unlock sequence. + * + * Values: + * - 0 - No further updates allowed to WDOG write-once registers. + * - 1 - WDOG write-once registers can be unlocked for updating. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_ALLOWUPDATE (4U) /*!< Bit position for WDOG_STCTRLH_ALLOWUPDATE. */ +#define BM_WDOG_STCTRLH_ALLOWUPDATE (0x0010U) /*!< Bit mask for WDOG_STCTRLH_ALLOWUPDATE. */ +#define BS_WDOG_STCTRLH_ALLOWUPDATE (1U) /*!< Bit field size in bits for WDOG_STCTRLH_ALLOWUPDATE. */ + +/*! @brief Read current value of the WDOG_STCTRLH_ALLOWUPDATE field. */ +#define BR_WDOG_STCTRLH_ALLOWUPDATE(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_ALLOWUPDATE)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_ALLOWUPDATE. */ +#define BF_WDOG_STCTRLH_ALLOWUPDATE(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_ALLOWUPDATE) & BM_WDOG_STCTRLH_ALLOWUPDATE) + +/*! @brief Set the ALLOWUPDATE field to a new value. */ +#define BW_WDOG_STCTRLH_ALLOWUPDATE(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_ALLOWUPDATE) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field DBGEN[5] (RW) + * + * Enables or disables WDOG in Debug mode. + * + * Values: + * - 0 - WDOG is disabled in CPU Debug mode. + * - 1 - WDOG is enabled in CPU Debug mode. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_DBGEN (5U) /*!< Bit position for WDOG_STCTRLH_DBGEN. */ +#define BM_WDOG_STCTRLH_DBGEN (0x0020U) /*!< Bit mask for WDOG_STCTRLH_DBGEN. */ +#define BS_WDOG_STCTRLH_DBGEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_DBGEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_DBGEN field. */ +#define BR_WDOG_STCTRLH_DBGEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_DBGEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_DBGEN. */ +#define BF_WDOG_STCTRLH_DBGEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_DBGEN) & BM_WDOG_STCTRLH_DBGEN) + +/*! @brief Set the DBGEN field to a new value. */ +#define BW_WDOG_STCTRLH_DBGEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_DBGEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field STOPEN[6] (RW) + * + * Enables or disables WDOG in Stop mode. + * + * Values: + * - 0 - WDOG is disabled in CPU Stop mode. + * - 1 - WDOG is enabled in CPU Stop mode. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_STOPEN (6U) /*!< Bit position for WDOG_STCTRLH_STOPEN. */ +#define BM_WDOG_STCTRLH_STOPEN (0x0040U) /*!< Bit mask for WDOG_STCTRLH_STOPEN. */ +#define BS_WDOG_STCTRLH_STOPEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_STOPEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_STOPEN field. */ +#define BR_WDOG_STCTRLH_STOPEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_STOPEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_STOPEN. */ +#define BF_WDOG_STCTRLH_STOPEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_STOPEN) & BM_WDOG_STCTRLH_STOPEN) + +/*! @brief Set the STOPEN field to a new value. */ +#define BW_WDOG_STCTRLH_STOPEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_STOPEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field WAITEN[7] (RW) + * + * Enables or disables WDOG in Wait mode. + * + * Values: + * - 0 - WDOG is disabled in CPU Wait mode. + * - 1 - WDOG is enabled in CPU Wait mode. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_WAITEN (7U) /*!< Bit position for WDOG_STCTRLH_WAITEN. */ +#define BM_WDOG_STCTRLH_WAITEN (0x0080U) /*!< Bit mask for WDOG_STCTRLH_WAITEN. */ +#define BS_WDOG_STCTRLH_WAITEN (1U) /*!< Bit field size in bits for WDOG_STCTRLH_WAITEN. */ + +/*! @brief Read current value of the WDOG_STCTRLH_WAITEN field. */ +#define BR_WDOG_STCTRLH_WAITEN(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WAITEN)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_WAITEN. */ +#define BF_WDOG_STCTRLH_WAITEN(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_WAITEN) & BM_WDOG_STCTRLH_WAITEN) + +/*! @brief Set the WAITEN field to a new value. */ +#define BW_WDOG_STCTRLH_WAITEN(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_WAITEN) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field TESTWDOG[10] (RW) + * + * Puts the watchdog in the functional test mode. In this mode, the watchdog + * timer and the associated compare and reset generation logic is tested for correct + * operation. The clock for the timer is switched from the main watchdog clock + * to the fast clock input for watchdog functional test. The TESTSEL bit selects + * the test to be run. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_TESTWDOG (10U) /*!< Bit position for WDOG_STCTRLH_TESTWDOG. */ +#define BM_WDOG_STCTRLH_TESTWDOG (0x0400U) /*!< Bit mask for WDOG_STCTRLH_TESTWDOG. */ +#define BS_WDOG_STCTRLH_TESTWDOG (1U) /*!< Bit field size in bits for WDOG_STCTRLH_TESTWDOG. */ + +/*! @brief Read current value of the WDOG_STCTRLH_TESTWDOG field. */ +#define BR_WDOG_STCTRLH_TESTWDOG(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_TESTWDOG)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_TESTWDOG. */ +#define BF_WDOG_STCTRLH_TESTWDOG(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_TESTWDOG) & BM_WDOG_STCTRLH_TESTWDOG) + +/*! @brief Set the TESTWDOG field to a new value. */ +#define BW_WDOG_STCTRLH_TESTWDOG(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_TESTWDOG) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field TESTSEL[11] (RW) + * + * Effective only if TESTWDOG is set. Selects the test to be run on the watchdog + * timer. + * + * Values: + * - 0 - Quick test. The timer runs in normal operation. You can load a small + * time-out value to do a quick test. + * - 1 - Byte test. Puts the timer in the byte test mode where individual bytes + * of the timer are enabled for operation and are compared for time-out + * against the corresponding byte of the programmed time-out value. Select the + * byte through BYTESEL[1:0] for testing. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_TESTSEL (11U) /*!< Bit position for WDOG_STCTRLH_TESTSEL. */ +#define BM_WDOG_STCTRLH_TESTSEL (0x0800U) /*!< Bit mask for WDOG_STCTRLH_TESTSEL. */ +#define BS_WDOG_STCTRLH_TESTSEL (1U) /*!< Bit field size in bits for WDOG_STCTRLH_TESTSEL. */ + +/*! @brief Read current value of the WDOG_STCTRLH_TESTSEL field. */ +#define BR_WDOG_STCTRLH_TESTSEL(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_TESTSEL)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_TESTSEL. */ +#define BF_WDOG_STCTRLH_TESTSEL(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_TESTSEL) & BM_WDOG_STCTRLH_TESTSEL) + +/*! @brief Set the TESTSEL field to a new value. */ +#define BW_WDOG_STCTRLH_TESTSEL(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_TESTSEL) = (v)) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field BYTESEL[13:12] (RW) + * + * This 2-bit field selects the byte to be tested when the watchdog is in the + * byte test mode. + * + * Values: + * - 00 - Byte 0 selected + * - 01 - Byte 1 selected + * - 10 - Byte 2 selected + * - 11 - Byte 3 selected + */ +/*@{*/ +#define BP_WDOG_STCTRLH_BYTESEL (12U) /*!< Bit position for WDOG_STCTRLH_BYTESEL. */ +#define BM_WDOG_STCTRLH_BYTESEL (0x3000U) /*!< Bit mask for WDOG_STCTRLH_BYTESEL. */ +#define BS_WDOG_STCTRLH_BYTESEL (2U) /*!< Bit field size in bits for WDOG_STCTRLH_BYTESEL. */ + +/*! @brief Read current value of the WDOG_STCTRLH_BYTESEL field. */ +#define BR_WDOG_STCTRLH_BYTESEL(x) (HW_WDOG_STCTRLH(x).B.BYTESEL) + +/*! @brief Format value for bitfield WDOG_STCTRLH_BYTESEL. */ +#define BF_WDOG_STCTRLH_BYTESEL(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_BYTESEL) & BM_WDOG_STCTRLH_BYTESEL) + +/*! @brief Set the BYTESEL field to a new value. */ +#define BW_WDOG_STCTRLH_BYTESEL(x, v) (HW_WDOG_STCTRLH_WR(x, (HW_WDOG_STCTRLH_RD(x) & ~BM_WDOG_STCTRLH_BYTESEL) | BF_WDOG_STCTRLH_BYTESEL(v))) +/*@}*/ + +/*! + * @name Register WDOG_STCTRLH, field DISTESTWDOG[14] (RW) + * + * Allows the WDOG's functional test mode to be disabled permanently. After it + * is set, it can only be cleared by a reset. It cannot be unlocked for editing + * after it is set. + * + * Values: + * - 0 - WDOG functional test mode is not disabled. + * - 1 - WDOG functional test mode is disabled permanently until reset. + */ +/*@{*/ +#define BP_WDOG_STCTRLH_DISTESTWDOG (14U) /*!< Bit position for WDOG_STCTRLH_DISTESTWDOG. */ +#define BM_WDOG_STCTRLH_DISTESTWDOG (0x4000U) /*!< Bit mask for WDOG_STCTRLH_DISTESTWDOG. */ +#define BS_WDOG_STCTRLH_DISTESTWDOG (1U) /*!< Bit field size in bits for WDOG_STCTRLH_DISTESTWDOG. */ + +/*! @brief Read current value of the WDOG_STCTRLH_DISTESTWDOG field. */ +#define BR_WDOG_STCTRLH_DISTESTWDOG(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_DISTESTWDOG)) + +/*! @brief Format value for bitfield WDOG_STCTRLH_DISTESTWDOG. */ +#define BF_WDOG_STCTRLH_DISTESTWDOG(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLH_DISTESTWDOG) & BM_WDOG_STCTRLH_DISTESTWDOG) + +/*! @brief Set the DISTESTWDOG field to a new value. */ +#define BW_WDOG_STCTRLH_DISTESTWDOG(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLH_ADDR(x), BP_WDOG_STCTRLH_DISTESTWDOG) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_STCTRLL - Watchdog Status and Control Register Low + ******************************************************************************/ + +/*! + * @brief HW_WDOG_STCTRLL - Watchdog Status and Control Register Low (RW) + * + * Reset value: 0x0001U + */ +typedef union _hw_wdog_stctrll +{ + uint16_t U; + struct _hw_wdog_stctrll_bitfields + { + uint16_t RESERVED0 : 15; /*!< [14:0] */ + uint16_t INTFLG : 1; /*!< [15] */ + } B; +} hw_wdog_stctrll_t; + +/*! + * @name Constants and macros for entire WDOG_STCTRLL register + */ +/*@{*/ +#define HW_WDOG_STCTRLL_ADDR(x) ((x) + 0x2U) + +#define HW_WDOG_STCTRLL(x) (*(__IO hw_wdog_stctrll_t *) HW_WDOG_STCTRLL_ADDR(x)) +#define HW_WDOG_STCTRLL_RD(x) (HW_WDOG_STCTRLL(x).U) +#define HW_WDOG_STCTRLL_WR(x, v) (HW_WDOG_STCTRLL(x).U = (v)) +#define HW_WDOG_STCTRLL_SET(x, v) (HW_WDOG_STCTRLL_WR(x, HW_WDOG_STCTRLL_RD(x) | (v))) +#define HW_WDOG_STCTRLL_CLR(x, v) (HW_WDOG_STCTRLL_WR(x, HW_WDOG_STCTRLL_RD(x) & ~(v))) +#define HW_WDOG_STCTRLL_TOG(x, v) (HW_WDOG_STCTRLL_WR(x, HW_WDOG_STCTRLL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_STCTRLL bitfields + */ + +/*! + * @name Register WDOG_STCTRLL, field INTFLG[15] (RW) + * + * Interrupt flag. It is set when an exception occurs. IRQRSTEN = 1 is a + * precondition to set this flag. INTFLG = 1 results in an interrupt being issued + * followed by a reset, WCT later. The interrupt can be cleared by writing 1 to this + * bit. It also gets cleared on a system reset. + */ +/*@{*/ +#define BP_WDOG_STCTRLL_INTFLG (15U) /*!< Bit position for WDOG_STCTRLL_INTFLG. */ +#define BM_WDOG_STCTRLL_INTFLG (0x8000U) /*!< Bit mask for WDOG_STCTRLL_INTFLG. */ +#define BS_WDOG_STCTRLL_INTFLG (1U) /*!< Bit field size in bits for WDOG_STCTRLL_INTFLG. */ + +/*! @brief Read current value of the WDOG_STCTRLL_INTFLG field. */ +#define BR_WDOG_STCTRLL_INTFLG(x) (BITBAND_ACCESS16(HW_WDOG_STCTRLL_ADDR(x), BP_WDOG_STCTRLL_INTFLG)) + +/*! @brief Format value for bitfield WDOG_STCTRLL_INTFLG. */ +#define BF_WDOG_STCTRLL_INTFLG(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_STCTRLL_INTFLG) & BM_WDOG_STCTRLL_INTFLG) + +/*! @brief Set the INTFLG field to a new value. */ +#define BW_WDOG_STCTRLL_INTFLG(x, v) (BITBAND_ACCESS16(HW_WDOG_STCTRLL_ADDR(x), BP_WDOG_STCTRLL_INTFLG) = (v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_TOVALH - Watchdog Time-out Value Register High + ******************************************************************************/ + +/*! + * @brief HW_WDOG_TOVALH - Watchdog Time-out Value Register High (RW) + * + * Reset value: 0x004CU + */ +typedef union _hw_wdog_tovalh +{ + uint16_t U; + struct _hw_wdog_tovalh_bitfields + { + uint16_t TOVALHIGH : 16; /*!< [15:0] */ + } B; +} hw_wdog_tovalh_t; + +/*! + * @name Constants and macros for entire WDOG_TOVALH register + */ +/*@{*/ +#define HW_WDOG_TOVALH_ADDR(x) ((x) + 0x4U) + +#define HW_WDOG_TOVALH(x) (*(__IO hw_wdog_tovalh_t *) HW_WDOG_TOVALH_ADDR(x)) +#define HW_WDOG_TOVALH_RD(x) (HW_WDOG_TOVALH(x).U) +#define HW_WDOG_TOVALH_WR(x, v) (HW_WDOG_TOVALH(x).U = (v)) +#define HW_WDOG_TOVALH_SET(x, v) (HW_WDOG_TOVALH_WR(x, HW_WDOG_TOVALH_RD(x) | (v))) +#define HW_WDOG_TOVALH_CLR(x, v) (HW_WDOG_TOVALH_WR(x, HW_WDOG_TOVALH_RD(x) & ~(v))) +#define HW_WDOG_TOVALH_TOG(x, v) (HW_WDOG_TOVALH_WR(x, HW_WDOG_TOVALH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_TOVALH bitfields + */ + +/*! + * @name Register WDOG_TOVALH, field TOVALHIGH[15:0] (RW) + * + * Defines the upper 16 bits of the 32-bit time-out value for the watchdog + * timer. It is defined in terms of cycles of the watchdog clock. + */ +/*@{*/ +#define BP_WDOG_TOVALH_TOVALHIGH (0U) /*!< Bit position for WDOG_TOVALH_TOVALHIGH. */ +#define BM_WDOG_TOVALH_TOVALHIGH (0xFFFFU) /*!< Bit mask for WDOG_TOVALH_TOVALHIGH. */ +#define BS_WDOG_TOVALH_TOVALHIGH (16U) /*!< Bit field size in bits for WDOG_TOVALH_TOVALHIGH. */ + +/*! @brief Read current value of the WDOG_TOVALH_TOVALHIGH field. */ +#define BR_WDOG_TOVALH_TOVALHIGH(x) (HW_WDOG_TOVALH(x).U) + +/*! @brief Format value for bitfield WDOG_TOVALH_TOVALHIGH. */ +#define BF_WDOG_TOVALH_TOVALHIGH(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_TOVALH_TOVALHIGH) & BM_WDOG_TOVALH_TOVALHIGH) + +/*! @brief Set the TOVALHIGH field to a new value. */ +#define BW_WDOG_TOVALH_TOVALHIGH(x, v) (HW_WDOG_TOVALH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_TOVALL - Watchdog Time-out Value Register Low + ******************************************************************************/ + +/*! + * @brief HW_WDOG_TOVALL - Watchdog Time-out Value Register Low (RW) + * + * Reset value: 0x4B4CU + * + * The time-out value of the watchdog must be set to a minimum of four watchdog + * clock cycles. This is to take into account the delay in new settings taking + * effect in the watchdog clock domain. + */ +typedef union _hw_wdog_tovall +{ + uint16_t U; + struct _hw_wdog_tovall_bitfields + { + uint16_t TOVALLOW : 16; /*!< [15:0] */ + } B; +} hw_wdog_tovall_t; + +/*! + * @name Constants and macros for entire WDOG_TOVALL register + */ +/*@{*/ +#define HW_WDOG_TOVALL_ADDR(x) ((x) + 0x6U) + +#define HW_WDOG_TOVALL(x) (*(__IO hw_wdog_tovall_t *) HW_WDOG_TOVALL_ADDR(x)) +#define HW_WDOG_TOVALL_RD(x) (HW_WDOG_TOVALL(x).U) +#define HW_WDOG_TOVALL_WR(x, v) (HW_WDOG_TOVALL(x).U = (v)) +#define HW_WDOG_TOVALL_SET(x, v) (HW_WDOG_TOVALL_WR(x, HW_WDOG_TOVALL_RD(x) | (v))) +#define HW_WDOG_TOVALL_CLR(x, v) (HW_WDOG_TOVALL_WR(x, HW_WDOG_TOVALL_RD(x) & ~(v))) +#define HW_WDOG_TOVALL_TOG(x, v) (HW_WDOG_TOVALL_WR(x, HW_WDOG_TOVALL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_TOVALL bitfields + */ + +/*! + * @name Register WDOG_TOVALL, field TOVALLOW[15:0] (RW) + * + * Defines the lower 16 bits of the 32-bit time-out value for the watchdog + * timer. It is defined in terms of cycles of the watchdog clock. + */ +/*@{*/ +#define BP_WDOG_TOVALL_TOVALLOW (0U) /*!< Bit position for WDOG_TOVALL_TOVALLOW. */ +#define BM_WDOG_TOVALL_TOVALLOW (0xFFFFU) /*!< Bit mask for WDOG_TOVALL_TOVALLOW. */ +#define BS_WDOG_TOVALL_TOVALLOW (16U) /*!< Bit field size in bits for WDOG_TOVALL_TOVALLOW. */ + +/*! @brief Read current value of the WDOG_TOVALL_TOVALLOW field. */ +#define BR_WDOG_TOVALL_TOVALLOW(x) (HW_WDOG_TOVALL(x).U) + +/*! @brief Format value for bitfield WDOG_TOVALL_TOVALLOW. */ +#define BF_WDOG_TOVALL_TOVALLOW(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_TOVALL_TOVALLOW) & BM_WDOG_TOVALL_TOVALLOW) + +/*! @brief Set the TOVALLOW field to a new value. */ +#define BW_WDOG_TOVALL_TOVALLOW(x, v) (HW_WDOG_TOVALL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_WINH - Watchdog Window Register High + ******************************************************************************/ + +/*! + * @brief HW_WDOG_WINH - Watchdog Window Register High (RW) + * + * Reset value: 0x0000U + * + * You must set the Window Register value lower than the Time-out Value Register. + */ +typedef union _hw_wdog_winh +{ + uint16_t U; + struct _hw_wdog_winh_bitfields + { + uint16_t WINHIGH : 16; /*!< [15:0] */ + } B; +} hw_wdog_winh_t; + +/*! + * @name Constants and macros for entire WDOG_WINH register + */ +/*@{*/ +#define HW_WDOG_WINH_ADDR(x) ((x) + 0x8U) + +#define HW_WDOG_WINH(x) (*(__IO hw_wdog_winh_t *) HW_WDOG_WINH_ADDR(x)) +#define HW_WDOG_WINH_RD(x) (HW_WDOG_WINH(x).U) +#define HW_WDOG_WINH_WR(x, v) (HW_WDOG_WINH(x).U = (v)) +#define HW_WDOG_WINH_SET(x, v) (HW_WDOG_WINH_WR(x, HW_WDOG_WINH_RD(x) | (v))) +#define HW_WDOG_WINH_CLR(x, v) (HW_WDOG_WINH_WR(x, HW_WDOG_WINH_RD(x) & ~(v))) +#define HW_WDOG_WINH_TOG(x, v) (HW_WDOG_WINH_WR(x, HW_WDOG_WINH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_WINH bitfields + */ + +/*! + * @name Register WDOG_WINH, field WINHIGH[15:0] (RW) + * + * Defines the upper 16 bits of the 32-bit window for the windowed mode of + * operation of the watchdog. It is defined in terms of cycles of the watchdog clock. + * In this mode, the watchdog can be refreshed only when the timer has reached a + * value greater than or equal to this window length. A refresh outside this + * window resets the system or if IRQRSTEN is set, it interrupts and then resets the + * system. + */ +/*@{*/ +#define BP_WDOG_WINH_WINHIGH (0U) /*!< Bit position for WDOG_WINH_WINHIGH. */ +#define BM_WDOG_WINH_WINHIGH (0xFFFFU) /*!< Bit mask for WDOG_WINH_WINHIGH. */ +#define BS_WDOG_WINH_WINHIGH (16U) /*!< Bit field size in bits for WDOG_WINH_WINHIGH. */ + +/*! @brief Read current value of the WDOG_WINH_WINHIGH field. */ +#define BR_WDOG_WINH_WINHIGH(x) (HW_WDOG_WINH(x).U) + +/*! @brief Format value for bitfield WDOG_WINH_WINHIGH. */ +#define BF_WDOG_WINH_WINHIGH(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_WINH_WINHIGH) & BM_WDOG_WINH_WINHIGH) + +/*! @brief Set the WINHIGH field to a new value. */ +#define BW_WDOG_WINH_WINHIGH(x, v) (HW_WDOG_WINH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_WINL - Watchdog Window Register Low + ******************************************************************************/ + +/*! + * @brief HW_WDOG_WINL - Watchdog Window Register Low (RW) + * + * Reset value: 0x0010U + * + * You must set the Window Register value lower than the Time-out Value Register. + */ +typedef union _hw_wdog_winl +{ + uint16_t U; + struct _hw_wdog_winl_bitfields + { + uint16_t WINLOW : 16; /*!< [15:0] */ + } B; +} hw_wdog_winl_t; + +/*! + * @name Constants and macros for entire WDOG_WINL register + */ +/*@{*/ +#define HW_WDOG_WINL_ADDR(x) ((x) + 0xAU) + +#define HW_WDOG_WINL(x) (*(__IO hw_wdog_winl_t *) HW_WDOG_WINL_ADDR(x)) +#define HW_WDOG_WINL_RD(x) (HW_WDOG_WINL(x).U) +#define HW_WDOG_WINL_WR(x, v) (HW_WDOG_WINL(x).U = (v)) +#define HW_WDOG_WINL_SET(x, v) (HW_WDOG_WINL_WR(x, HW_WDOG_WINL_RD(x) | (v))) +#define HW_WDOG_WINL_CLR(x, v) (HW_WDOG_WINL_WR(x, HW_WDOG_WINL_RD(x) & ~(v))) +#define HW_WDOG_WINL_TOG(x, v) (HW_WDOG_WINL_WR(x, HW_WDOG_WINL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_WINL bitfields + */ + +/*! + * @name Register WDOG_WINL, field WINLOW[15:0] (RW) + * + * Defines the lower 16 bits of the 32-bit window for the windowed mode of + * operation of the watchdog. It is defined in terms of cycles of the pre-scaled + * watchdog clock. In this mode, the watchdog can be refreshed only when the timer + * reaches a value greater than or equal to this window length value. A refresh + * outside of this window resets the system or if IRQRSTEN is set, it interrupts and + * then resets the system. + */ +/*@{*/ +#define BP_WDOG_WINL_WINLOW (0U) /*!< Bit position for WDOG_WINL_WINLOW. */ +#define BM_WDOG_WINL_WINLOW (0xFFFFU) /*!< Bit mask for WDOG_WINL_WINLOW. */ +#define BS_WDOG_WINL_WINLOW (16U) /*!< Bit field size in bits for WDOG_WINL_WINLOW. */ + +/*! @brief Read current value of the WDOG_WINL_WINLOW field. */ +#define BR_WDOG_WINL_WINLOW(x) (HW_WDOG_WINL(x).U) + +/*! @brief Format value for bitfield WDOG_WINL_WINLOW. */ +#define BF_WDOG_WINL_WINLOW(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_WINL_WINLOW) & BM_WDOG_WINL_WINLOW) + +/*! @brief Set the WINLOW field to a new value. */ +#define BW_WDOG_WINL_WINLOW(x, v) (HW_WDOG_WINL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_REFRESH - Watchdog Refresh register + ******************************************************************************/ + +/*! + * @brief HW_WDOG_REFRESH - Watchdog Refresh register (RW) + * + * Reset value: 0xB480U + */ +typedef union _hw_wdog_refresh +{ + uint16_t U; + struct _hw_wdog_refresh_bitfields + { + uint16_t WDOGREFRESH : 16; /*!< [15:0] */ + } B; +} hw_wdog_refresh_t; + +/*! + * @name Constants and macros for entire WDOG_REFRESH register + */ +/*@{*/ +#define HW_WDOG_REFRESH_ADDR(x) ((x) + 0xCU) + +#define HW_WDOG_REFRESH(x) (*(__IO hw_wdog_refresh_t *) HW_WDOG_REFRESH_ADDR(x)) +#define HW_WDOG_REFRESH_RD(x) (HW_WDOG_REFRESH(x).U) +#define HW_WDOG_REFRESH_WR(x, v) (HW_WDOG_REFRESH(x).U = (v)) +#define HW_WDOG_REFRESH_SET(x, v) (HW_WDOG_REFRESH_WR(x, HW_WDOG_REFRESH_RD(x) | (v))) +#define HW_WDOG_REFRESH_CLR(x, v) (HW_WDOG_REFRESH_WR(x, HW_WDOG_REFRESH_RD(x) & ~(v))) +#define HW_WDOG_REFRESH_TOG(x, v) (HW_WDOG_REFRESH_WR(x, HW_WDOG_REFRESH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_REFRESH bitfields + */ + +/*! + * @name Register WDOG_REFRESH, field WDOGREFRESH[15:0] (RW) + * + * Watchdog refresh register. A sequence of 0xA602 followed by 0xB480 within 20 + * bus clock cycles written to this register refreshes the WDOG and prevents it + * from resetting the system. Writing a value other than the above mentioned + * sequence or if the sequence is longer than 20 bus cycles, resets the system, or if + * IRQRSTEN is set, it interrupts and then resets the system. + */ +/*@{*/ +#define BP_WDOG_REFRESH_WDOGREFRESH (0U) /*!< Bit position for WDOG_REFRESH_WDOGREFRESH. */ +#define BM_WDOG_REFRESH_WDOGREFRESH (0xFFFFU) /*!< Bit mask for WDOG_REFRESH_WDOGREFRESH. */ +#define BS_WDOG_REFRESH_WDOGREFRESH (16U) /*!< Bit field size in bits for WDOG_REFRESH_WDOGREFRESH. */ + +/*! @brief Read current value of the WDOG_REFRESH_WDOGREFRESH field. */ +#define BR_WDOG_REFRESH_WDOGREFRESH(x) (HW_WDOG_REFRESH(x).U) + +/*! @brief Format value for bitfield WDOG_REFRESH_WDOGREFRESH. */ +#define BF_WDOG_REFRESH_WDOGREFRESH(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_REFRESH_WDOGREFRESH) & BM_WDOG_REFRESH_WDOGREFRESH) + +/*! @brief Set the WDOGREFRESH field to a new value. */ +#define BW_WDOG_REFRESH_WDOGREFRESH(x, v) (HW_WDOG_REFRESH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_UNLOCK - Watchdog Unlock register + ******************************************************************************/ + +/*! + * @brief HW_WDOG_UNLOCK - Watchdog Unlock register (RW) + * + * Reset value: 0xD928U + */ +typedef union _hw_wdog_unlock +{ + uint16_t U; + struct _hw_wdog_unlock_bitfields + { + uint16_t WDOGUNLOCK : 16; /*!< [15:0] */ + } B; +} hw_wdog_unlock_t; + +/*! + * @name Constants and macros for entire WDOG_UNLOCK register + */ +/*@{*/ +#define HW_WDOG_UNLOCK_ADDR(x) ((x) + 0xEU) + +#define HW_WDOG_UNLOCK(x) (*(__IO hw_wdog_unlock_t *) HW_WDOG_UNLOCK_ADDR(x)) +#define HW_WDOG_UNLOCK_RD(x) (HW_WDOG_UNLOCK(x).U) +#define HW_WDOG_UNLOCK_WR(x, v) (HW_WDOG_UNLOCK(x).U = (v)) +#define HW_WDOG_UNLOCK_SET(x, v) (HW_WDOG_UNLOCK_WR(x, HW_WDOG_UNLOCK_RD(x) | (v))) +#define HW_WDOG_UNLOCK_CLR(x, v) (HW_WDOG_UNLOCK_WR(x, HW_WDOG_UNLOCK_RD(x) & ~(v))) +#define HW_WDOG_UNLOCK_TOG(x, v) (HW_WDOG_UNLOCK_WR(x, HW_WDOG_UNLOCK_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_UNLOCK bitfields + */ + +/*! + * @name Register WDOG_UNLOCK, field WDOGUNLOCK[15:0] (RW) + * + * Writing the unlock sequence values to this register to makes the watchdog + * write-once registers writable again. The required unlock sequence is 0xC520 + * followed by 0xD928 within 20 bus clock cycles. A valid unlock sequence opens a + * window equal in length to the WCT within which you can update the registers. + * Writing a value other than the above mentioned sequence or if the sequence is + * longer than 20 bus cycles, resets the system or if IRQRSTEN is set, it interrupts + * and then resets the system. The unlock sequence is effective only if + * ALLOWUPDATE is set. + */ +/*@{*/ +#define BP_WDOG_UNLOCK_WDOGUNLOCK (0U) /*!< Bit position for WDOG_UNLOCK_WDOGUNLOCK. */ +#define BM_WDOG_UNLOCK_WDOGUNLOCK (0xFFFFU) /*!< Bit mask for WDOG_UNLOCK_WDOGUNLOCK. */ +#define BS_WDOG_UNLOCK_WDOGUNLOCK (16U) /*!< Bit field size in bits for WDOG_UNLOCK_WDOGUNLOCK. */ + +/*! @brief Read current value of the WDOG_UNLOCK_WDOGUNLOCK field. */ +#define BR_WDOG_UNLOCK_WDOGUNLOCK(x) (HW_WDOG_UNLOCK(x).U) + +/*! @brief Format value for bitfield WDOG_UNLOCK_WDOGUNLOCK. */ +#define BF_WDOG_UNLOCK_WDOGUNLOCK(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_UNLOCK_WDOGUNLOCK) & BM_WDOG_UNLOCK_WDOGUNLOCK) + +/*! @brief Set the WDOGUNLOCK field to a new value. */ +#define BW_WDOG_UNLOCK_WDOGUNLOCK(x, v) (HW_WDOG_UNLOCK_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_TMROUTH - Watchdog Timer Output Register High + ******************************************************************************/ + +/*! + * @brief HW_WDOG_TMROUTH - Watchdog Timer Output Register High (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_wdog_tmrouth +{ + uint16_t U; + struct _hw_wdog_tmrouth_bitfields + { + uint16_t TIMEROUTHIGH : 16; /*!< [15:0] */ + } B; +} hw_wdog_tmrouth_t; + +/*! + * @name Constants and macros for entire WDOG_TMROUTH register + */ +/*@{*/ +#define HW_WDOG_TMROUTH_ADDR(x) ((x) + 0x10U) + +#define HW_WDOG_TMROUTH(x) (*(__IO hw_wdog_tmrouth_t *) HW_WDOG_TMROUTH_ADDR(x)) +#define HW_WDOG_TMROUTH_RD(x) (HW_WDOG_TMROUTH(x).U) +#define HW_WDOG_TMROUTH_WR(x, v) (HW_WDOG_TMROUTH(x).U = (v)) +#define HW_WDOG_TMROUTH_SET(x, v) (HW_WDOG_TMROUTH_WR(x, HW_WDOG_TMROUTH_RD(x) | (v))) +#define HW_WDOG_TMROUTH_CLR(x, v) (HW_WDOG_TMROUTH_WR(x, HW_WDOG_TMROUTH_RD(x) & ~(v))) +#define HW_WDOG_TMROUTH_TOG(x, v) (HW_WDOG_TMROUTH_WR(x, HW_WDOG_TMROUTH_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_TMROUTH bitfields + */ + +/*! + * @name Register WDOG_TMROUTH, field TIMEROUTHIGH[15:0] (RW) + * + * Shows the value of the upper 16 bits of the watchdog timer. + */ +/*@{*/ +#define BP_WDOG_TMROUTH_TIMEROUTHIGH (0U) /*!< Bit position for WDOG_TMROUTH_TIMEROUTHIGH. */ +#define BM_WDOG_TMROUTH_TIMEROUTHIGH (0xFFFFU) /*!< Bit mask for WDOG_TMROUTH_TIMEROUTHIGH. */ +#define BS_WDOG_TMROUTH_TIMEROUTHIGH (16U) /*!< Bit field size in bits for WDOG_TMROUTH_TIMEROUTHIGH. */ + +/*! @brief Read current value of the WDOG_TMROUTH_TIMEROUTHIGH field. */ +#define BR_WDOG_TMROUTH_TIMEROUTHIGH(x) (HW_WDOG_TMROUTH(x).U) + +/*! @brief Format value for bitfield WDOG_TMROUTH_TIMEROUTHIGH. */ +#define BF_WDOG_TMROUTH_TIMEROUTHIGH(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_TMROUTH_TIMEROUTHIGH) & BM_WDOG_TMROUTH_TIMEROUTHIGH) + +/*! @brief Set the TIMEROUTHIGH field to a new value. */ +#define BW_WDOG_TMROUTH_TIMEROUTHIGH(x, v) (HW_WDOG_TMROUTH_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_TMROUTL - Watchdog Timer Output Register Low + ******************************************************************************/ + +/*! + * @brief HW_WDOG_TMROUTL - Watchdog Timer Output Register Low (RW) + * + * Reset value: 0x0000U + * + * During Stop mode, the WDOG_TIMER_OUT will be caught at the pre-stop value of + * the watchdog timer. After exiting Stop mode, a maximum delay of 1 WDOG_CLK + * cycle + 3 bus clock cycles will occur before the WDOG_TIMER_OUT starts following + * the watchdog timer. + */ +typedef union _hw_wdog_tmroutl +{ + uint16_t U; + struct _hw_wdog_tmroutl_bitfields + { + uint16_t TIMEROUTLOW : 16; /*!< [15:0] */ + } B; +} hw_wdog_tmroutl_t; + +/*! + * @name Constants and macros for entire WDOG_TMROUTL register + */ +/*@{*/ +#define HW_WDOG_TMROUTL_ADDR(x) ((x) + 0x12U) + +#define HW_WDOG_TMROUTL(x) (*(__IO hw_wdog_tmroutl_t *) HW_WDOG_TMROUTL_ADDR(x)) +#define HW_WDOG_TMROUTL_RD(x) (HW_WDOG_TMROUTL(x).U) +#define HW_WDOG_TMROUTL_WR(x, v) (HW_WDOG_TMROUTL(x).U = (v)) +#define HW_WDOG_TMROUTL_SET(x, v) (HW_WDOG_TMROUTL_WR(x, HW_WDOG_TMROUTL_RD(x) | (v))) +#define HW_WDOG_TMROUTL_CLR(x, v) (HW_WDOG_TMROUTL_WR(x, HW_WDOG_TMROUTL_RD(x) & ~(v))) +#define HW_WDOG_TMROUTL_TOG(x, v) (HW_WDOG_TMROUTL_WR(x, HW_WDOG_TMROUTL_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_TMROUTL bitfields + */ + +/*! + * @name Register WDOG_TMROUTL, field TIMEROUTLOW[15:0] (RW) + * + * Shows the value of the lower 16 bits of the watchdog timer. + */ +/*@{*/ +#define BP_WDOG_TMROUTL_TIMEROUTLOW (0U) /*!< Bit position for WDOG_TMROUTL_TIMEROUTLOW. */ +#define BM_WDOG_TMROUTL_TIMEROUTLOW (0xFFFFU) /*!< Bit mask for WDOG_TMROUTL_TIMEROUTLOW. */ +#define BS_WDOG_TMROUTL_TIMEROUTLOW (16U) /*!< Bit field size in bits for WDOG_TMROUTL_TIMEROUTLOW. */ + +/*! @brief Read current value of the WDOG_TMROUTL_TIMEROUTLOW field. */ +#define BR_WDOG_TMROUTL_TIMEROUTLOW(x) (HW_WDOG_TMROUTL(x).U) + +/*! @brief Format value for bitfield WDOG_TMROUTL_TIMEROUTLOW. */ +#define BF_WDOG_TMROUTL_TIMEROUTLOW(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_TMROUTL_TIMEROUTLOW) & BM_WDOG_TMROUTL_TIMEROUTLOW) + +/*! @brief Set the TIMEROUTLOW field to a new value. */ +#define BW_WDOG_TMROUTL_TIMEROUTLOW(x, v) (HW_WDOG_TMROUTL_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_RSTCNT - Watchdog Reset Count register + ******************************************************************************/ + +/*! + * @brief HW_WDOG_RSTCNT - Watchdog Reset Count register (RW) + * + * Reset value: 0x0000U + */ +typedef union _hw_wdog_rstcnt +{ + uint16_t U; + struct _hw_wdog_rstcnt_bitfields + { + uint16_t RSTCNT : 16; /*!< [15:0] */ + } B; +} hw_wdog_rstcnt_t; + +/*! + * @name Constants and macros for entire WDOG_RSTCNT register + */ +/*@{*/ +#define HW_WDOG_RSTCNT_ADDR(x) ((x) + 0x14U) + +#define HW_WDOG_RSTCNT(x) (*(__IO hw_wdog_rstcnt_t *) HW_WDOG_RSTCNT_ADDR(x)) +#define HW_WDOG_RSTCNT_RD(x) (HW_WDOG_RSTCNT(x).U) +#define HW_WDOG_RSTCNT_WR(x, v) (HW_WDOG_RSTCNT(x).U = (v)) +#define HW_WDOG_RSTCNT_SET(x, v) (HW_WDOG_RSTCNT_WR(x, HW_WDOG_RSTCNT_RD(x) | (v))) +#define HW_WDOG_RSTCNT_CLR(x, v) (HW_WDOG_RSTCNT_WR(x, HW_WDOG_RSTCNT_RD(x) & ~(v))) +#define HW_WDOG_RSTCNT_TOG(x, v) (HW_WDOG_RSTCNT_WR(x, HW_WDOG_RSTCNT_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_RSTCNT bitfields + */ + +/*! + * @name Register WDOG_RSTCNT, field RSTCNT[15:0] (RW) + * + * Counts the number of times the watchdog resets the system. This register is + * reset only on a POR. Writing 1 to the bit to be cleared enables you to clear + * the contents of this register. + */ +/*@{*/ +#define BP_WDOG_RSTCNT_RSTCNT (0U) /*!< Bit position for WDOG_RSTCNT_RSTCNT. */ +#define BM_WDOG_RSTCNT_RSTCNT (0xFFFFU) /*!< Bit mask for WDOG_RSTCNT_RSTCNT. */ +#define BS_WDOG_RSTCNT_RSTCNT (16U) /*!< Bit field size in bits for WDOG_RSTCNT_RSTCNT. */ + +/*! @brief Read current value of the WDOG_RSTCNT_RSTCNT field. */ +#define BR_WDOG_RSTCNT_RSTCNT(x) (HW_WDOG_RSTCNT(x).U) + +/*! @brief Format value for bitfield WDOG_RSTCNT_RSTCNT. */ +#define BF_WDOG_RSTCNT_RSTCNT(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_RSTCNT_RSTCNT) & BM_WDOG_RSTCNT_RSTCNT) + +/*! @brief Set the RSTCNT field to a new value. */ +#define BW_WDOG_RSTCNT_RSTCNT(x, v) (HW_WDOG_RSTCNT_WR(x, v)) +/*@}*/ + +/******************************************************************************* + * HW_WDOG_PRESC - Watchdog Prescaler register + ******************************************************************************/ + +/*! + * @brief HW_WDOG_PRESC - Watchdog Prescaler register (RW) + * + * Reset value: 0x0400U + */ +typedef union _hw_wdog_presc +{ + uint16_t U; + struct _hw_wdog_presc_bitfields + { + uint16_t RESERVED0 : 8; /*!< [7:0] */ + uint16_t PRESCVAL : 3; /*!< [10:8] */ + uint16_t RESERVED1 : 5; /*!< [15:11] */ + } B; +} hw_wdog_presc_t; + +/*! + * @name Constants and macros for entire WDOG_PRESC register + */ +/*@{*/ +#define HW_WDOG_PRESC_ADDR(x) ((x) + 0x16U) + +#define HW_WDOG_PRESC(x) (*(__IO hw_wdog_presc_t *) HW_WDOG_PRESC_ADDR(x)) +#define HW_WDOG_PRESC_RD(x) (HW_WDOG_PRESC(x).U) +#define HW_WDOG_PRESC_WR(x, v) (HW_WDOG_PRESC(x).U = (v)) +#define HW_WDOG_PRESC_SET(x, v) (HW_WDOG_PRESC_WR(x, HW_WDOG_PRESC_RD(x) | (v))) +#define HW_WDOG_PRESC_CLR(x, v) (HW_WDOG_PRESC_WR(x, HW_WDOG_PRESC_RD(x) & ~(v))) +#define HW_WDOG_PRESC_TOG(x, v) (HW_WDOG_PRESC_WR(x, HW_WDOG_PRESC_RD(x) ^ (v))) +/*@}*/ + +/* + * Constants & macros for individual WDOG_PRESC bitfields + */ + +/*! + * @name Register WDOG_PRESC, field PRESCVAL[10:8] (RW) + * + * 3-bit prescaler for the watchdog clock source. A value of zero indicates no + * division of the input WDOG clock. The watchdog clock is divided by (PRESCVAL + + * 1) to provide the prescaled WDOG_CLK. + */ +/*@{*/ +#define BP_WDOG_PRESC_PRESCVAL (8U) /*!< Bit position for WDOG_PRESC_PRESCVAL. */ +#define BM_WDOG_PRESC_PRESCVAL (0x0700U) /*!< Bit mask for WDOG_PRESC_PRESCVAL. */ +#define BS_WDOG_PRESC_PRESCVAL (3U) /*!< Bit field size in bits for WDOG_PRESC_PRESCVAL. */ + +/*! @brief Read current value of the WDOG_PRESC_PRESCVAL field. */ +#define BR_WDOG_PRESC_PRESCVAL(x) (HW_WDOG_PRESC(x).B.PRESCVAL) + +/*! @brief Format value for bitfield WDOG_PRESC_PRESCVAL. */ +#define BF_WDOG_PRESC_PRESCVAL(v) ((uint16_t)((uint16_t)(v) << BP_WDOG_PRESC_PRESCVAL) & BM_WDOG_PRESC_PRESCVAL) + +/*! @brief Set the PRESCVAL field to a new value. */ +#define BW_WDOG_PRESC_PRESCVAL(x, v) (HW_WDOG_PRESC_WR(x, (HW_WDOG_PRESC_RD(x) & ~BM_WDOG_PRESC_PRESCVAL) | BF_WDOG_PRESC_PRESCVAL(v))) +/*@}*/ + +/******************************************************************************* + * hw_wdog_t - module struct + ******************************************************************************/ +/*! + * @brief All WDOG module registers. + */ +#pragma pack(1) +typedef struct _hw_wdog +{ + __IO hw_wdog_stctrlh_t STCTRLH; /*!< [0x0] Watchdog Status and Control Register High */ + __IO hw_wdog_stctrll_t STCTRLL; /*!< [0x2] Watchdog Status and Control Register Low */ + __IO hw_wdog_tovalh_t TOVALH; /*!< [0x4] Watchdog Time-out Value Register High */ + __IO hw_wdog_tovall_t TOVALL; /*!< [0x6] Watchdog Time-out Value Register Low */ + __IO hw_wdog_winh_t WINH; /*!< [0x8] Watchdog Window Register High */ + __IO hw_wdog_winl_t WINL; /*!< [0xA] Watchdog Window Register Low */ + __IO hw_wdog_refresh_t REFRESH; /*!< [0xC] Watchdog Refresh register */ + __IO hw_wdog_unlock_t UNLOCK; /*!< [0xE] Watchdog Unlock register */ + __IO hw_wdog_tmrouth_t TMROUTH; /*!< [0x10] Watchdog Timer Output Register High */ + __IO hw_wdog_tmroutl_t TMROUTL; /*!< [0x12] Watchdog Timer Output Register Low */ + __IO hw_wdog_rstcnt_t RSTCNT; /*!< [0x14] Watchdog Reset Count register */ + __IO hw_wdog_presc_t PRESC; /*!< [0x16] Watchdog Prescaler register */ +} hw_wdog_t; +#pragma pack() + +/*! @brief Macro to access all WDOG registers. */ +/*! @param x WDOG module instance base address. */ +/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, + * use the '&' operator, like <code>&HW_WDOG(WDOG_BASE)</code>. */ +#define HW_WDOG(x) (*(hw_wdog_t *)(x)) + +#endif /* __HW_WDOG_REGISTERS_H__ */ +/* EOF */ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/fsl_bitaccess.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/fsl_bitaccess.h new file mode 100644 index 0000000000..2efc27f135 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K22F/device/MK22F51212/fsl_bitaccess.h @@ -0,0 +1,526 @@ +/* +** ################################################################### +** Version: rev. 2.5, 2014-05-06 +** Build: b140604 +** +** Abstract: +** Register bit field access macros. +** +** Copyright (c) 2014 Freescale Semiconductor, Inc. +** All rights reserved. +** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** +** o Redistributions of source code must retain the above copyright notice, this list +** of conditions and the following disclaimer. +** +** o Redistributions in binary form must reproduce the above copyright notice, this +** list of conditions and the following disclaimer in the documentation and/or +** other materials provided with the distribution. +** +** o Neither the name of Freescale Semiconductor, Inc. nor the names of its +** contributors may be used to endorse or promote products derived from this +** software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +** http: www.freescale.com +** mail: support@freescale.com +** +** Revisions: +** - rev. 1.0 (2013-07-23) +** Initial version. +** - rev. 1.1 (2013-09-17) +** RM rev. 0.4 update. +** - rev. 2.0 (2013-10-29) +** Register accessor macros added to the memory map. +** Symbols for Processor Expert memory map compatibility added to the memory map. +** Startup file for gcc has been updated according to CMSIS 3.2. +** System initialization updated. +** - rev. 2.1 (2013-10-30) +** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled. +** - rev. 2.2 (2013-12-20) +** Update according to reference manual rev. 0.6, +** - rev. 2.3 (2014-01-13) +** Update according to reference manual rev. 0.61, +** - rev. 2.4 (2014-02-10) +** The declaration of clock configurations has been moved to separate header file system_MK22F51212.h +** - rev. 2.5 (2014-05-06) +** Update according to reference manual rev. 1.0, +** Update of system and startup files. +** Module access macro module_BASES replaced by module_BASE_PTRS. +** +** ################################################################### +*/ + + +#ifndef _FSL_BITACCESS_H +#define _FSL_BITACCESS_H 1 + +#include <stdint.h> +#include <stdlib.h> + +/** + * @brief Macro to access a single bit of a 32-bit peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_ACCESS32(Reg,Bit) (*((uint32_t volatile*)(0x42000000u + (32u*((uint32_t)(Reg) - (uint32_t)0x40000000u)) + (4u*((uint32_t)(Bit)))))) + +/** + * @brief Macro to access a single bit of a 16-bit peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_ACCESS16(Reg,Bit) (*((uint16_t volatile*)(0x42000000u + (32u*((uint32_t)(Reg) - (uint32_t)0x40000000u)) + (4u*((uint32_t)(Bit)))))) + +/** + * @brief Macro to access a single bit of an 8-bit peripheral register (bit band region + * 0x40000000 to 0x400FFFFF) using the bit-band alias region access. + * @param Reg Register to access. + * @param Bit Bit number to access. + * @return Value of the targeted bit in the bit band region. + */ +#define BITBAND_ACCESS8(Reg,Bit) (*((uint8_t volatile*)(0x42000000u + (32u*((uint32_t)(Reg) - (uint32_t)0x40000000u)) + (4u*((uint32_t)(Bit)))))) + +/* + * Macros for single instance registers + */ + +#define BF_SET(reg, field) HW_##reg##_SET(BM_##reg##_##field) +#define BF_CLR(reg, field) HW_##reg##_CLR(BM_##reg##_##field) +#define BF_TOG(reg, field) HW_##reg##_TOG(BM_##reg##_##field) + +#define BF_SETV(reg, field, v) HW_##reg##_SET(BF_##reg##_##field(v)) +#define BF_CLRV(reg, field, v) HW_##reg##_CLR(BF_##reg##_##field(v)) +#define BF_TOGV(reg, field, v) HW_##reg##_TOG(BF_##reg##_##field(v)) + +#define BV_FLD(reg, field, sym) BF_##reg##_##field(BV_##reg##_##field##__##sym) +#define BV_VAL(reg, field, sym) BV_##reg##_##field##__##sym + +#define BF_RD(reg, field) HW_##reg.B.field +#define BF_WR(reg, field, v) BW_##reg##_##field(v) + +#define BF_CS1(reg, f1, v1) \ + (HW_##reg##_CLR(BM_##reg##_##f1), \ + HW_##reg##_SET(BF_##reg##_##f1(v1))) + +#define BF_CS2(reg, f1, v1, f2, v2) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2))) + +#define BF_CS3(reg, f1, v1, f2, v2, f3, v3) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3))) + +#define BF_CS4(reg, f1, v1, f2, v2, f3, v3, f4, v4) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4))) + +#define BF_CS5(reg, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5))) + +#define BF_CS6(reg, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6))) + +#define BF_CS7(reg, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7))) + +#define BF_CS8(reg, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7, f8, v8) \ + (HW_##reg##_CLR(BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7 | \ + BM_##reg##_##f8), \ + HW_##reg##_SET(BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7) | \ + BF_##reg##_##f8(v8))) + +/* + * Macros for multiple instance registers + */ + +#define BF_SETn(reg, n, field) HW_##reg##_SET(n, BM_##reg##_##field) +#define BF_CLRn(reg, n, field) HW_##reg##_CLR(n, BM_##reg##_##field) +#define BF_TOGn(reg, n, field) HW_##reg##_TOG(n, BM_##reg##_##field) + +#define BF_SETVn(reg, n, field, v) HW_##reg##_SET(n, BF_##reg##_##field(v)) +#define BF_CLRVn(reg, n, field, v) HW_##reg##_CLR(n, BF_##reg##_##field(v)) +#define BF_TOGVn(reg, n, field, v) HW_##reg##_TOG(n, BF_##reg##_##field(v)) + +#define BV_FLDn(reg, n, field, sym) BF_##reg##_##field(BV_##reg##_##field##__##sym) +#define BV_VALn(reg, n, field, sym) BV_##reg##_##field##__##sym + +#define BF_RDn(reg, n, field) HW_##reg(n).B.field +#define BF_WRn(reg, n, field, v) BW_##reg##_##field(n, v) + +#define BF_CS1n(reg, n, f1, v1) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1)))) + +#define BF_CS2n(reg, n, f1, v1, f2, v2) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2)))) + +#define BF_CS3n(reg, n, f1, v1, f2, v2, f3, v3) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3)))) + +#define BF_CS4n(reg, n, f1, v1, f2, v2, f3, v3, f4, v4) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4)))) + +#define BF_CS5n(reg, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5)))) + +#define BF_CS6n(reg, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6)))) + +#define BF_CS7n(reg, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7)))) + +#define BF_CS8n(reg, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7, f8, v8) \ + (HW_##reg##_CLR(n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7 | \ + BM_##reg##_##f8)), \ + HW_##reg##_SET(n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7) | \ + BF_##reg##_##f8(v8)))) + +/* + * Macros for single instance MULTI-BLOCK registers + */ + +#define BFn_SET(reg, blk, field) HW_##reg##_SET(blk, BM_##reg##_##field) +#define BFn_CLR(reg, blk, field) HW_##reg##_CLR(blk, BM_##reg##_##field) +#define BFn_TOG(reg, blk, field) HW_##reg##_TOG(blk, BM_##reg##_##field) + +#define BFn_SETV(reg, blk, field, v) HW_##reg##_SET(blk, BF_##reg##_##field(v)) +#define BFn_CLRV(reg, blk, field, v) HW_##reg##_CLR(blk, BF_##reg##_##field(v)) +#define BFn_TOGV(reg, blk, field, v) HW_##reg##_TOG(blk, BF_##reg##_##field(v)) + +#define BVn_FLD(reg, field, sym) BF_##reg##_##field(BV_##reg##_##field##__##sym) +#define BVn_VAL(reg, field, sym) BV_##reg##_##field##__##sym + +#define BFn_RD(reg, blk, field) HW_##reg(blk).B.field +#define BFn_WR(reg, blk, field, v) BW_##reg##_##field(blk, v) + +#define BFn_CS1(reg, blk, f1, v1) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1))) + +#define BFn_CS2(reg, blk, f1, v1, f2, v2) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2))) + +#define BFn_CS3(reg, blk, f1, v1, f2, v2, f3, v3) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3))) + +#define BFn_CS4(reg, blk, f1, v1, f2, v2, f3, v3, f4, v4) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4))) + +#define BFn_CS5(reg, blk, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5))) + +#define BFn_CS6(reg, blk, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6))) + +#define BFn_CS7(reg, blk, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7))) + +#define BFn_CS8(reg, blk, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7, f8, v8) \ + (HW_##reg##_CLR(blk, BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7 | \ + BM_##reg##_##f8), \ + HW_##reg##_SET(blk, BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7) | \ + BF_##reg##_##f8(v8))) + +/* + * Macros for MULTI-BLOCK multiple instance registers + */ + +#define BFn_SETn(reg, blk, n, field) HW_##reg##_SET(blk, n, BM_##reg##_##field) +#define BFn_CLRn(reg, blk, n, field) HW_##reg##_CLR(blk, n, BM_##reg##_##field) +#define BFn_TOGn(reg, blk, n, field) HW_##reg##_TOG(blk, n, BM_##reg##_##field) + +#define BFn_SETVn(reg, blk, n, field, v) HW_##reg##_SET(blk, n, BF_##reg##_##field(v)) +#define BFn_CLRVn(reg, blk, n, field, v) HW_##reg##_CLR(blk, n, BF_##reg##_##field(v)) +#define BFn_TOGVn(reg, blk, n, field, v) HW_##reg##_TOG(blk, n, BF_##reg##_##field(v)) + +#define BVn_FLDn(reg, blk, n, field, sym) BF_##reg##_##field(BV_##reg##_##field##__##sym) +#define BVn_VALn(reg, blk, n, field, sym) BV_##reg##_##field##__##sym + +#define BFn_RDn(reg, blk, n, field) HW_##reg(n).B.field +#define BFn_WRn(reg, blk, n, field, v) BW_##reg##_##field(n, v) + +#define BFn_CS1n(reg, blk, n, f1, v1) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1)))) + +#define BFn_CS2n(reg, blk, n, f1, v1, f2, v2) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2)))) + +#define BFn_CS3n(reg, blk, n, f1, v1, f2, v2, f3, v3) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3)))) + +#define BFn_CS4n(reg, blk, n, f1, v1, f2, v2, f3, v3, f4, v4) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4)))) + +#define BFn_CS5n(reg, blk, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5)))) + +#define BFn_CS6n(reg, blk, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6)))) + +#define BFn_CS7n(reg, blk, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7)))) + +#define BFn_CS8n(reg, blk, n, f1, v1, f2, v2, f3, v3, f4, v4, f5, v5, f6, v6, f7, v7, f8, v8) \ + (HW_##reg##_CLR(blk, n, (BM_##reg##_##f1 | \ + BM_##reg##_##f2 | \ + BM_##reg##_##f3 | \ + BM_##reg##_##f4 | \ + BM_##reg##_##f5 | \ + BM_##reg##_##f6 | \ + BM_##reg##_##f7 | \ + BM_##reg##_##f8)), \ + HW_##reg##_SET(blk, n, (BF_##reg##_##f1(v1) | \ + BF_##reg##_##f2(v2) | \ + BF_##reg##_##f3(v3) | \ + BF_##reg##_##f4(v4) | \ + BF_##reg##_##f5(v5) | \ + BF_##reg##_##f6(v6) | \ + BF_##reg##_##f7(v7) | \ + BF_##reg##_##f8(v8)))) + +#endif /* _FSL_BITACCESS_H */ + +/******************************************************************************/ |