1 files changed, 295 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/serial_api.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/serial_api.c
new file mode 100644
index 0000000000..6c3b01815a
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/serial_api.c
@@ -0,0 +1,295 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+// math.h required for floating point operations for baud rate calculation
+#include <math.h>
+
+#include <string.h>
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "clk_freqs.h"
+#include "PeripheralPins.h"
+
+//Devices either user UART0 or UARTLP
+#ifndef UARTLP_BASES
+    #define UARTLP_C2_RE_MASK        UART0_C2_RE_MASK
+    #define UARTLP_C2_TE_MASK        UART0_C2_TE_MASK
+    #define UARTLP_BDH_SBNS_MASK    UART0_BDH_SBNS_MASK
+    #define    UARTLP_BDH_SBNS_SHIFT    UART0_BDH_SBNS_SHIFT
+    #define UARTLP_S1_TDRE_MASK        UART0_S1_TDRE_MASK
+    #define UARTLP_S1_OR_MASK        UART0_S1_OR_MASK
+    #define UARTLP_C2_RIE_MASK        UART0_C2_RIE_MASK
+    #define UARTLP_C2_TIE_MASK        UART0_C2_TIE_MASK
+    #define UARTLP_C2_SBK_MASK        UART0_C2_SBK_MASK
+    #define UARTLP_S1_RDRF_MASK        UART0_S1_RDRF_MASK
+#endif
+
+#ifdef UART2
+    #define UART_NUM        3
+#else
+    #define UART_NUM        1
+#endif
+
+/******************************************************************************
+ * INITIALIZATION
+ ******************************************************************************/
+
+static uint32_t serial_irq_ids[UART_NUM] = {0};
+static uart_irq_handler irq_handler;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+void serial_init(serial_t *obj, PinName tx, PinName rx) {
+    // determine the UART to use
+    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+    UARTName uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+    MBED_ASSERT((int)uart != NC);
+
+    obj->uart = (UARTLP_Type *)uart;
+    // enable clk
+    switch (uart) {
+        case UART_0: if (mcgpllfll_frequency() != 0)                    //PLL/FLL is selected
+                        SIM->SOPT2 |= (1<<SIM_SOPT2_UART0SRC_SHIFT);
+                     else
+                        SIM->SOPT2 |= (2<<SIM_SOPT2_UART0SRC_SHIFT);
+                     SIM->SCGC4 |= SIM_SCGC4_UART0_MASK; break;
+    #if UART_NUM > 1
+        case UART_1: SIM->SCGC4 |= SIM_SCGC4_UART1_MASK; break;
+        case UART_2: SIM->SCGC4 |= SIM_SCGC4_UART2_MASK; break;
+    #endif
+    }
+    // Disable UART before changing registers
+    obj->uart->C2 &= ~(UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK);
+    
+    switch (uart) {
+        case UART_0: obj->index = 0; break;
+    #if UART_NUM > 1
+        case UART_1: obj->index = 1; break;
+        case UART_2: obj->index = 2; break;
+    #endif
+    }
+
+    // set default baud rate and format
+    serial_baud  (obj, 9600);
+    serial_format(obj, 8, ParityNone, 1);
+
+    // pinout the chosen uart
+    pinmap_pinout(tx, PinMap_UART_TX);
+    pinmap_pinout(rx, PinMap_UART_RX);
+
+    // set rx/tx pins in PullUp mode
+    if (tx != NC) {
+        pin_mode(tx, PullUp);
+    }
+    if (rx != NC) {
+        pin_mode(rx, PullUp);
+    }
+
+    obj->uart->C2 |= (UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK);
+
+    if (uart == STDIO_UART) {
+        stdio_uart_inited = 1;
+        memcpy(&stdio_uart, obj, sizeof(serial_t));
+    }
+}
+
+void serial_free(serial_t *obj) {
+    serial_irq_ids[obj->index] = 0;
+}
+
+// serial_baud
+//
+// set the baud rate, taking in to account the current SystemFrequency
+void serial_baud(serial_t *obj, int baudrate) {
+    
+    // save C2 state
+    uint8_t c2_state = (obj->uart->C2 & (UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK));
+    
+    // Disable UART before changing registers
+    obj->uart->C2 &= ~(UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK);
+    
+    uint32_t PCLK;
+    if (obj->uart == UART0) {
+        if (mcgpllfll_frequency() != 0)
+            PCLK = mcgpllfll_frequency();
+        else
+            PCLK = extosc_frequency();
+    } else
+        PCLK = bus_frequency();
+
+    // First we check to see if the basic divide with no DivAddVal/MulVal
+    // ratio gives us an integer result. If it does, we set DivAddVal = 0,
+    // MulVal = 1. Otherwise, we search the valid ratio value range to find
+    // the closest match. This could be more elegant, using search methods
+    // and/or lookup tables, but the brute force method is not that much
+    // slower, and is more maintainable.
+    uint16_t DL = PCLK / (16 * baudrate);
+
+    // set BDH and BDL
+    obj->uart->BDH = (obj->uart->BDH & ~(0x1f)) | ((DL >> 8) & 0x1f);
+    obj->uart->BDL = (obj->uart->BDL & ~(0xff)) | ((DL >> 0) & 0xff);
+    
+    // restore C2 state
+    obj->uart->C2 |= c2_state;
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
+    MBED_ASSERT((stop_bits == 1) || (stop_bits == 2));
+    MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) || (parity == ParityEven));
+    MBED_ASSERT(data_bits == 8); // TODO: Support other number of data bits (also in the write method!)
+
+    // save C2 state
+    uint8_t c2_state = (obj->uart->C2 & (UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK));
+    
+    // Disable UART before changing registers
+    obj->uart->C2 &= ~(UARTLP_C2_RE_MASK | UARTLP_C2_TE_MASK);
+    
+
+    uint8_t parity_enable, parity_select;
+    switch (parity) {
+        case ParityNone: parity_enable = 0; parity_select = 0; break;
+        case ParityOdd : parity_enable = 1; parity_select = 1; data_bits++; break;
+        case ParityEven: parity_enable = 1; parity_select = 0; data_bits++; break;
+        default:
+            break;
+    }
+
+    stop_bits -= 1;
+
+    // data bits, parity and parity mode
+    obj->uart->C1 = ((parity_enable << 1)
+                  |  (parity_select << 0));
+    
+    // stop bits
+    obj->uart->BDH &= ~UARTLP_BDH_SBNS_MASK;
+    obj->uart->BDH |= (stop_bits << UARTLP_BDH_SBNS_SHIFT);
+    
+    // restore C2 state
+    obj->uart->C2 |= c2_state;
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+static inline void uart_irq(uint8_t status, uint32_t index) {
+    if (serial_irq_ids[index] != 0) {
+        if (status & UARTLP_S1_TDRE_MASK)
+            irq_handler(serial_irq_ids[index], TxIrq);
+
+        if (status & UARTLP_S1_RDRF_MASK)
+            irq_handler(serial_irq_ids[index], RxIrq);
+    }
+}
+
+void uart0_irq() {
+    uart_irq(UART0->S1, 0);
+    if (UART0->S1 & UARTLP_S1_OR_MASK)
+        UART0->S1 |= UARTLP_S1_OR_MASK;
+}
+#if UART_NUM > 1
+void uart1_irq() {uart_irq(UART1->S1, 1);}
+void uart2_irq() {uart_irq(UART2->S1, 2);}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
+    irq_handler = handler;
+    serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
+    IRQn_Type irq_n = (IRQn_Type)0;
+    uint32_t vector = 0;
+    switch ((int)obj->uart) {
+        case UART_0: irq_n=UART0_IRQn; vector = (uint32_t)&uart0_irq; break;
+        #if UART_NUM > 1
+        case UART_1: irq_n=UART1_IRQn; vector = (uint32_t)&uart1_irq; break;
+        case UART_2: irq_n=UART2_IRQn; vector = (uint32_t)&uart2_irq; break;
+        #endif
+    }
+
+    if (enable) {
+        switch (irq) {
+            case RxIrq: obj->uart->C2 |= (UARTLP_C2_RIE_MASK); break;
+            case TxIrq: obj->uart->C2 |= (UARTLP_C2_TIE_MASK); break;
+        }
+        NVIC_SetVector(irq_n, vector);
+        NVIC_EnableIRQ(irq_n);
+
+    } else { // disable
+        int all_disabled = 0;
+        SerialIrq other_irq = (irq == RxIrq) ? (TxIrq) : (RxIrq);
+        switch (irq) {
+            case RxIrq: obj->uart->C2 &= ~(UARTLP_C2_RIE_MASK); break;
+            case TxIrq: obj->uart->C2 &= ~(UARTLP_C2_TIE_MASK); break;
+        }
+        switch (other_irq) {
+            case RxIrq: all_disabled = (obj->uart->C2 & (UARTLP_C2_RIE_MASK)) == 0; break;
+            case TxIrq: all_disabled = (obj->uart->C2 & (UARTLP_C2_TIE_MASK)) == 0; break;
+        }
+        if (all_disabled)
+            NVIC_DisableIRQ(irq_n);
+    }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+int serial_getc(serial_t *obj) {
+    while (!serial_readable(obj));
+    return obj->uart->D;
+}
+
+void serial_putc(serial_t *obj, int c) {
+    while (!serial_writable(obj));
+    obj->uart->D = c;
+}
+
+int serial_readable(serial_t *obj) {
+    // check overrun
+    if (obj->uart->S1 &  UARTLP_S1_OR_MASK) {
+        obj->uart->S1 |= UARTLP_S1_OR_MASK;
+    }
+    return (obj->uart->S1 & UARTLP_S1_RDRF_MASK);
+}
+
+int serial_writable(serial_t *obj) {
+    // check overrun
+    if (obj->uart->S1 &  UARTLP_S1_OR_MASK) {
+        obj->uart->S1 |= UARTLP_S1_OR_MASK;
+    }
+    return (obj->uart->S1 & UARTLP_S1_TDRE_MASK);
+}
+
+void serial_clear(serial_t *obj) {
+}
+
+void serial_pinout_tx(PinName tx) {
+    pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj) {
+    obj->uart->C2 |= UARTLP_C2_SBK_MASK;
+}
+
+void serial_break_clear(serial_t *obj) {
+    obj->uart->C2 &= ~UARTLP_C2_SBK_MASK;
+}
+