1 files changed, 85 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/PeripheralNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/PeripheralNames.h
new file mode 100644
index 0000000000..aa958daabe
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/PeripheralNames.h
@@ -0,0 +1,85 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    OSC32KCLK = 0,
+    RTC_CLKIN = 2
+} RTCName;
+
+typedef enum {
+    UART_0 = (int)UART0_BASE
+} UARTName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+typedef enum {
+    I2C_0 = (int)I2C0_BASE,
+    I2C_1 = -1
+} I2CName;
+
+typedef enum {
+    ADC0_SE0  =  0,
+    ADC0_SE1  =  1,
+    ADC0_SE2  =  2,
+    ADC0_SE3  =  3,
+    ADC0_SE4  =  4,
+    ADC0_SE5  =  5,
+    ADC0_SE6  =  6,
+    ADC0_SE7  =  7,
+    ADC0_SE8  =  8,
+    ADC0_SE9  =  9,
+    ADC0_SE10 =  10,
+    ADC0_SE11 =  11,
+    ADC0_SE12 =  12,
+    ADC0_SE13 =  13
+} ADCName;
+
+typedef enum {
+    DAC_0 = 0
+} DACName;
+
+typedef enum {
+    SPI_0 = (int)SPI0_BASE
+} SPIName;
+
+#define TPM_SHIFT   8
+typedef enum {
+    PWM_1  = (0 << TPM_SHIFT) | (0),  // TPM0 CH0
+    PWM_2  = (0 << TPM_SHIFT) | (1),  // TPM0 CH1
+    PWM_3  = (0 << TPM_SHIFT) | (2),  // TPM0 CH2
+    PWM_4  = (0 << TPM_SHIFT) | (3),  // TPM0 CH3
+    PWM_5  = (0 << TPM_SHIFT) | (4),  // TPM0 CH4
+    PWM_6  = (0 << TPM_SHIFT) | (5),  // TPM0 CH5
+
+    PWM_7  = (1 << TPM_SHIFT) | (0),  // TPM1 CH0
+    PWM_8  = (1 << TPM_SHIFT) | (1),  // TPM1 CH1
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif