1 files changed, 159 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/us_ticker.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/us_ticker.c
new file mode 100644
index 0000000000..93a1512b50
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/us_ticker.c
@@ -0,0 +1,159 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+#include "clk_freqs.h"
+
+#define PIT_TIMER           PIT->CHANNEL[0]
+#define PIT_TIMER_IRQ       PIT0_IRQn
+#define PIT_TICKER          PIT->CHANNEL[1]
+#define PIT_TICKER_IRQ      PIT1_IRQn
+
+static void timer_init(void);
+static void ticker_init(void);
+
+
+static int us_ticker_inited = 0;
+static uint32_t clk_mhz;
+
+void us_ticker_init(void) {
+    if (us_ticker_inited)
+        return;
+    us_ticker_inited = 1;
+    
+    SIM->SCGC6 |= SIM_SCGC6_PIT_MASK;   // Clock PIT
+    PIT->MCR = 0;                       // Enable PIT
+    
+    clk_mhz = bus_frequency() / 1000000;
+
+    timer_init();
+    ticker_init();
+}
+
+/******************************************************************************
+ * Timer for us timing.
+ *
+ * The K20D5M does not have a prescaler on its PIT timer nor the option
+ * to chain timers, which is why a software timer is required to get 32-bit
+ * word length.
+ ******************************************************************************/
+static volatile uint32_t msb_counter = 0;
+static uint32_t timer_ldval = 0;
+
+static void timer_isr(void) {
+    msb_counter++;
+    PIT_TIMER.TFLG = 1;
+}
+
+static void timer_init(void) {  
+    //CLZ counts the leading zeros, returning number of bits not used by clk_mhz
+    timer_ldval = clk_mhz << __CLZ(clk_mhz);
+
+    PIT_TIMER.LDVAL = timer_ldval;  // 1us
+    PIT_TIMER.TCTRL |= PIT_TCTRL_TIE_MASK;
+    PIT_TIMER.TCTRL |= PIT_TCTRL_TEN_MASK;  // Start timer 0
+
+    NVIC_SetVector(PIT_TIMER_IRQ, (uint32_t)timer_isr);
+    NVIC_EnableIRQ(PIT_TIMER_IRQ);
+}
+
+uint32_t us_ticker_read() {
+    if (!us_ticker_inited)
+        us_ticker_init();
+        
+    uint32_t retval;
+    __disable_irq(); 
+    retval = (timer_ldval - PIT_TIMER.CVAL) / clk_mhz; //Hardware bits
+    retval |= msb_counter << __CLZ(clk_mhz);           //Software bits
+    
+    if (PIT_TIMER.TFLG == 1) {                         //If overflow bit is set, force it to be handled
+        timer_isr();                                   //Handle IRQ, read again to make sure software/hardware bits are synced
+        NVIC_ClearPendingIRQ(PIT_TIMER_IRQ);
+        return us_ticker_read();
+    }
+
+    __enable_irq();
+    return retval;
+}
+
+/******************************************************************************
+ * Timer Event
+ *
+ * It schedules interrupts at given (32bit)us interval of time.
+ * It is implemented using PIT channel 1, since no prescaler is available,
+ * some bits are implemented in software.
+ ******************************************************************************/
+static void ticker_isr(void);
+
+static void ticker_init(void) {
+    /* Set interrupt handler */
+    NVIC_SetVector(PIT_TICKER_IRQ, (uint32_t)ticker_isr);
+    NVIC_EnableIRQ(PIT_TICKER_IRQ);
+}
+
+void us_ticker_disable_interrupt(void) {
+    PIT_TICKER.TCTRL &= ~PIT_TCTRL_TIE_MASK;
+}
+
+void us_ticker_clear_interrupt(void) {
+    // we already clear interrupt in lptmr_isr
+}
+
+static uint32_t us_ticker_int_counter = 0;
+
+inline static void ticker_set(uint32_t count) {
+    PIT_TICKER.TCTRL = 0;
+    PIT_TICKER.LDVAL = count;
+    PIT_TICKER.TCTRL = PIT_TCTRL_TIE_MASK | PIT_TCTRL_TEN_MASK;
+}
+
+static void ticker_isr(void) {
+    // Clear IRQ flag
+    PIT_TICKER.TFLG = 1;
+
+    if (us_ticker_int_counter > 0) {
+        ticker_set(0xFFFFFFFF);
+        us_ticker_int_counter--;
+    } else {
+        // This function is going to disable the interrupts if there are
+        // no other events in the queue
+        us_ticker_irq_handler();
+    }
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp) {
+    int delta = (int)((uint32_t)timestamp - us_ticker_read());
+    if (delta <= 0) {
+        // This event was in the past:
+        us_ticker_irq_handler();
+        return;
+    }
+
+    //Calculate how much falls outside the 32-bit after multiplying with clk_mhz
+    //We shift twice 16-bit to keep everything within the 32-bit variable
+    us_ticker_int_counter = (uint32_t)(delta >> 16);
+    us_ticker_int_counter *= clk_mhz;
+    us_ticker_int_counter >>= 16;
+    
+    uint32_t us_ticker_int_remainder = (uint32_t)delta * clk_mhz;
+    if (us_ticker_int_remainder == 0) {
+        ticker_set(0xFFFFFFFF);
+        us_ticker_int_counter--;
+    } else {
+        ticker_set(us_ticker_int_remainder);
+    }
+}