diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_comp.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_comp.h | 520 |
1 files changed, 520 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_comp.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_comp.h new file mode 100644 index 0000000000..daf8954e5f --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal_comp.h @@ -0,0 +1,520 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal_comp.h + * @author MCD Application Team + * @version V1.0.0 + * @date 5-September-2014 + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_COMP_H +#define __STM32L1xx_HAL_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_def.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ + +/** + * @brief COMP Init structure definition + */ +typedef struct +{ + + uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. + This parameter can be a value of @ref COMP_InvertingInput + Note: Inverting input can be changed on the fly, while comparator is running. + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded (On COMP1, inverting input is fixed to Vrefint). */ + + uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. + This parameter can be a value of @ref COMPEx_NonInvertingInput */ + + uint32_t Output; /*!< Selects the output redirection of the comparator. + This parameter can be a value of @ref COMP_Output + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded. */ + + uint32_t Mode; /*!< Selects the operating consumption mode of the comparator + to adjust the speed/consumption. + This parameter can be a value of @ref COMP_Mode + Note: This feature is available on COMP2 only. If COMP1 is selected, this parameter is discarded. */ + + uint32_t WindowMode; /*!< Selects the window mode of the 2 comparators. + If enabled, non-inverting inputs of the 2 comparators are connected together and are using inputs of COMP2 only (COMP1 non-inverting input is no more accessible, even from ADC channel VCOMP). + This parameter can be a value of @ref COMP_WindowMode + Note: This feature must be enabled from COMP2 instance. If COMP1 is selected, this parameter is discarded. */ + + uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator when using interruption on EXTI line (interrupt mode). + This parameter can be a value of @ref COMP_TriggerMode + Note: This feature is used with function "HAL_COMP_Start_IT()". In all other functions, this parameter is discarded. */ + + uint32_t NonInvertingInputPull; /*!< Selects the internal pulling resistor connected on non inverting input. + This parameter can be a value of @ref COMP_NonInvertingInputPull + Note: To avoid extra power consumption, only one resistor should be enabled at a time. + Note: This feature is available on COMP1 only. If COMP2 is selected, this parameter is discarded. */ + +}COMP_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ + HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ +}HAL_COMP_StateTypeDef; + +/** + * @brief COMP Handle Structure definition + */ +typedef struct +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ +} COMP_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_Output COMP Output + * @{ + */ +#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00000000) /*!< COMP2 output connected to TIM2 Input Capture 4 */ +#define COMP_OUTPUT_TIM2OCREFCLR ( COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM2 OCREF Clear */ +#define COMP_OUTPUT_TIM3IC4 ( COMP_CSR_OUTSEL_1 ) /*!< COMP2 output connected to TIM3 Input Capture 4 */ +#define COMP_OUTPUT_TIM3OCREFCLR ( COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM3 OCREF Clear */ +#define COMP_OUTPUT_TIM4IC4 (COMP_CSR_OUTSEL_2 ) /*!< COMP2 output connected to TIM4 Input Capture 4 */ +#define COMP_OUTPUT_TIM4OCREFCLR (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_0) /*!< COMP2 output connected to TIM4 OCREF Clear */ +#define COMP_OUTPUT_TIM10IC1 (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 ) /*!< COMP2 output connected to TIM10 Input Capture 1 */ +#define COMP_OUTPUT_NONE (COMP_CSR_OUTSEL_2 | COMP_CSR_OUTSEL_1 | COMP_CSR_OUTSEL_0) /*!< COMP2 output is not connected to other peripherals */ + +#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM3IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \ + ((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \ + ((OUTPUT) == COMP_OUTPUT_TIM10IC1) || \ + ((OUTPUT) == COMP_OUTPUT_NONE) ) +/** + * @} + */ + +/** @defgroup COMP_InvertingInput COMP InvertingInput + * @{ + */ +/* Inverting Input specific to COMP2 */ +#define COMP_INVERTINGINPUT_IO ( COMP_CSR_INSEL_0) /*!< External I/O (COMP2_INM connected to pin PB3) connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_VREFINT ( COMP_CSR_INSEL_1 ) /*!< VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_3_4VREFINT ( COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< 3/4 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_1_2VREFINT (COMP_CSR_INSEL_2 ) /*!< 1/2 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_1_4VREFINT (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_0) /*!< 1/4 VREFINT connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_DAC1 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 ) /*!< DAC_OUT1 (PA4) connected to comparator 2 inverting input */ +#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_INSEL_2 | COMP_CSR_INSEL_1 | COMP_CSR_INSEL_0) /*!< DAC2_OUT (PA5) connected to comparator 2 inverting input */ + +#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_IO) || \ + ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ + ((INPUT) == COMP_INVERTINGINPUT_DAC2) ) +/** + * @} + */ + +/** @defgroup COMP_Mode COMP Mode + * @{ + */ +/* Please refer to the electrical characteristics in the device datasheet for + the power consumption values */ +#define COMP_MODE_LOWSPEED ((uint32_t)0x00000000) /*!< Low Speed */ +#define COMP_MODE_HIGHSPEED COMP_CSR_SPEED /*!< High Speed */ + +#define IS_COMP_MODE(SPEED) (((SPEED) == COMP_MODE_LOWSPEED) || \ + ((SPEED) == COMP_MODE_HIGHSPEED)) +/** + * @} + */ + +/** @defgroup COMP_WindowMode COMP WindowMode + * @{ + */ +#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled: COMP1 non-inverting input is independant */ +#define COMP_WINDOWMODE_ENABLED COMP_CSR_WNDWE /*!< Window mode enabled: COMP1 non-inverting input is no more accessible, even from ADC channel VCOMP) (connected to COMP2 non-inverting input) */ + +#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \ + ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED)) +/** + * @} + */ + +/** @defgroup COMP_OutputLevel COMP OutputLevel + * @{ + */ +/* Comparator output is low when the non-inverting input is at a lower */ +/* voltage than the inverting input. */ +#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000) + +/* Comparator output is high when the non-inverting input is at a higher */ +/* voltage than the inverting input. */ +#define COMP_OUTPUTLEVEL_HIGH ((uint32_t)0x00000001) +/** + * @} + */ + +/** @defgroup COMP_TriggerMode COMP TriggerMode + * @{ + */ +#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING) ) +/** + * @} + */ + +/** @defgroup COMP_ExtiLineEvent COMP ExtiLineEvent + * @{ + */ +#define COMP_EXTI_LINE_COMP1_EVENT EXTI_RTSR_TR21 /*!< External interrupt line 21 Connected to COMP1 */ +#define COMP_EXTI_LINE_COMP2_EVENT EXTI_RTSR_TR22 /*!< External interrupt line 22 Connected to COMP2 */ + +/** + * @} + */ + +/** @defgroup COMP_NonInvertingInputPull COMP NonInvertingInputPull + * @{ + */ +#define COMP_NONINVERTINGINPUT_NOPULL ((uint32_t)0x00000000) /*!< No internal pull-up or pull-down resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_10KPU COMP_CSR_10KPU /*!< Internal 10kOhm pull-up resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_10KPD COMP_CSR_10KPD /*!< Internal 10kOhm pull-down resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_400KPU COMP_CSR_400KPU /*!< Internal 400kOhm pull-up resistor connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_400KPD COMP_CSR_400KPD /*!< Internal 400kOhm pull-down resistor connected to comparator non inverting input */ + +#define IS_COMP_NONINVERTINGINPUTPULL(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_NOPULL) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_10KPU) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_10KPD) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_400KPU) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_400KPD) ) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Macro COMP Exported Macro + * @{ + */ + +/** @brief Reset COMP handle state + * @param __HANDLE__: COMP handle. + * @retval None + */ +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) + +/** + * @brief Enables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_ENABLE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + SET_BIT(COMP->CSR, COMP_CSR_CMP1EN) \ + : \ + MODIFY_REG(COMP->CSR, COMP_CSR_INSEL, (__HANDLE__)->Init.InvertingInput ) \ + ) + +/** + * @brief Disables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_DISABLE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + CLEAR_BIT(COMP->CSR, COMP_CSR_CMP1EN) \ + : \ + CLEAR_BIT(COMP->CSR, COMP_CSR_INSEL) \ + ) + + +/** @brief Checks whether the specified COMP flag is set or not. + * @param __HANDLE__: specifies the COMP Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg COMP_FLAG_LOCK: lock flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->CSR, (__FLAG__)) == (__FLAG__)) + + +/** + * @brief Enable the Exti Line rising edge trigger. + * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (SET_BIT(EXTI->RTSR, (__EXTILINE__))) + +/** + * @brief Disable the Exti Line rising edge trigger. + * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (CLEAR_BIT(EXTI->RTSR, (__EXTILINE__))) + +/** + * @brief Enable the Exti Line falling edge trigger. + * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (SET_BIT(EXTI->FTSR, (__EXTILINE__))) + +/** + * @brief Disable the Exti Line falling edge trigger. + * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (CLEAR_BIT(EXTI->FTSR, (__EXTILINE__))) + +/** + * @brief Get the specified EXTI line for a comparator instance + * @param __INSTANCE__: specifies the COMP instance. + * @retval value of @ref COMP_ExtiLineEvent + */ +#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) \ + ( ( ((__INSTANCE__) == COMP1) \ + )? \ + (COMP_EXTI_LINE_COMP1_EVENT) \ + : \ + (COMP_EXTI_LINE_COMP2_EVENT) \ + ) + +/** + * @brief Enable the COMP Exti Line. + * @param __EXTILINE__: specifies the COMP Exti sources to be enabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (SET_BIT(EXTI->IMR, (__EXTILINE__))) + +/** + * @brief Disable the COMP Exti Line. + * @param __EXTILINE__: specifies the COMP Exti sources to be disabled. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (CLEAR_BIT(EXTI->IMR, (__EXTILINE__))) + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __FLAG__: specifies the COMP Exti sources to be checked. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval The state of __FLAG__ (SET or RESET). + */ +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (READ_BIT(EXTI->PR, (__FLAG__))) + +/** + * @brief Clear the COMP Exti flags. + * @param __FLAG__: specifies the COMP Exti sources to be cleared. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None. + */ +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTILINE__: specifies the COMP Exti sources to trig. + * This parameter can be a value of @ref COMP_ExtiLineEvent + * @retval None + */ +#define __HAL_COMP_EXTI_GENERATE_SWIT(__EXTILINE__) (SET_BIT(EXTI->SWIER, (__EXTILINE__))) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup COMP_Private_Macro COMP Private Macro + * @{ + */ + +/** + * @brief Select the COMP register CSR bit CMPxOUT corresponding to the + * selected COMP instance. + * @param __HANDLE__: COMP handle + * @retval Comparator register CSR bit COMP_CSR_CMP1OUT or COMP_CSR_CMP2OUT + */ +#define __COMP_CSR_CMPXOUT(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + (COMP_CSR_CMP1OUT) \ + : \ + (COMP_CSR_CMP2OUT) \ + ) + +/** + * @brief Verification of COMP state: enabled or disabled + * @param __HANDLE__: COMP handle + * @retval SET (COMP enabled) or RESET (COMP disabled) + */ +#define __COMP_IS_ENABLED(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == COMP1) \ + )? \ + (((READ_BIT(COMP->CSR , COMP_CSR_CMP1EN) == COMP_CSR_CMP1EN) \ + ) ? SET : RESET) \ + : \ + (((READ_BIT(COMP->CSR , COMP_CSR_INSEL) != RESET) \ + ) ? SET : RESET) \ + ) + +/** + * @} + */ + + +/* Include COMP HAL Extension module */ +#include "stm32l1xx_hal_comp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +/** @addtogroup COMP_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup COMP_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup COMP_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); + +/* Callback in Interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral State functions **************************************************/ +/** @addtogroup COMP_Exported_Functions_Group4 + * @{ + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |