diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal.h | 955 |
1 files changed, 955 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal.h new file mode 100644 index 0000000000..98a5acfbb1 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_hal.h @@ -0,0 +1,955 @@ +/** + ****************************************************************************** + * @file stm32l1xx_hal.h + * @author MCD Application Team + * @version V1.0.0 + * @date 5-September-2014 + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_HAL_H +#define __STM32L1xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal_conf.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Constants SYSCFG: SYStem ConFiG + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ + +#define SYSCFG_BOOT_MAINFLASH ((uint32_t)0x00000000) +#define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_0) +#if defined(FSMC_R_BASE) +#define SYSCFG_BOOT_FSMC ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_1) +#endif /* FSMC_R_BASE */ +#define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RI_Constants RI: Routing Interface + * @{ + */ + +/** @defgroup RI_InputCapture Input Capture + * @{ + */ + +#define RI_INPUTCAPTURE_IC1 RI_ICR_IC1 /*!< Input Capture 1 */ +#define RI_INPUTCAPTURE_IC2 RI_ICR_IC2 /*!< Input Capture 2 */ +#define RI_INPUTCAPTURE_IC3 RI_ICR_IC3 /*!< Input Capture 3 */ +#define RI_INPUTCAPTURE_IC4 RI_ICR_IC4 /*!< Input Capture 4 */ + +/** + * @} + */ + +/** @defgroup TIM_Select TIM Select + * @{ + */ + +#define TIM_SELECT_NONE ((uint32_t)0x00000000) /*!< None selected */ +#define TIM_SELECT_TIM2 ((uint32_t)RI_ICR_TIM_0) /*!< Timer 2 selected */ +#define TIM_SELECT_TIM3 ((uint32_t)RI_ICR_TIM_1) /*!< Timer 3 selected */ +#define TIM_SELECT_TIM4 ((uint32_t)RI_ICR_TIM) /*!< Timer 4 selected */ + +#define IS_RI_TIM(__TIM__) (((__TIM__) == TIM_SELECT_NONE) || \ + ((__TIM__) == TIM_SELECT_TIM2) || \ + ((__TIM__) == TIM_SELECT_TIM3) || \ + ((__TIM__) == TIM_SELECT_TIM4)) + +/** + * @} + */ + +/** @defgroup RI_InputCaptureRouting Input Capture Routing + * @{ + */ + /* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */ +#define RI_INPUTCAPTUREROUTING_0 ((uint32_t)0x00000000) /* PA0 PA1 PA2 PA3 */ +#define RI_INPUTCAPTUREROUTING_1 ((uint32_t)0x00000001) /* PA4 PA5 PA6 PA7 */ +#define RI_INPUTCAPTUREROUTING_2 ((uint32_t)0x00000002) /* PA8 PA9 PA10 PA11 */ +#define RI_INPUTCAPTUREROUTING_3 ((uint32_t)0x00000003) /* PA12 PA13 PA14 PA15 */ +#define RI_INPUTCAPTUREROUTING_4 ((uint32_t)0x00000004) /* PC0 PC1 PC2 PC3 */ +#define RI_INPUTCAPTUREROUTING_5 ((uint32_t)0x00000005) /* PC4 PC5 PC6 PC7 */ +#define RI_INPUTCAPTUREROUTING_6 ((uint32_t)0x00000006) /* PC8 PC9 PC10 PC11 */ +#define RI_INPUTCAPTUREROUTING_7 ((uint32_t)0x00000007) /* PC12 PC13 PC14 PC15 */ +#define RI_INPUTCAPTUREROUTING_8 ((uint32_t)0x00000008) /* PD0 PD1 PD2 PD3 */ +#define RI_INPUTCAPTUREROUTING_9 ((uint32_t)0x00000009) /* PD4 PD5 PD6 PD7 */ +#define RI_INPUTCAPTUREROUTING_10 ((uint32_t)0x0000000A) /* PD8 PD9 PD10 PD11 */ +#define RI_INPUTCAPTUREROUTING_11 ((uint32_t)0x0000000B) /* PD12 PD13 PD14 PD15 */ +#define RI_INPUTCAPTUREROUTING_12 ((uint32_t)0x0000000C) /* PE0 PE1 PE2 PE3 */ +#define RI_INPUTCAPTUREROUTING_13 ((uint32_t)0x0000000D) /* PE4 PE5 PE6 PE7 */ +#define RI_INPUTCAPTUREROUTING_14 ((uint32_t)0x0000000E) /* PE8 PE9 PE10 PE11 */ +#define RI_INPUTCAPTUREROUTING_15 ((uint32_t)0x0000000F) /* PE12 PE13 PE14 PE15 */ + +#define IS_RI_INPUTCAPTURE_ROUTING(__ROUTING__) (((__ROUTING__) == RI_INPUTCAPTUREROUTING_0) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_1) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_2) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_3) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_4) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_5) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_6) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_7) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_8) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_9) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_10) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_11) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_12) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_13) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_14) || \ + ((__ROUTING__) == RI_INPUTCAPTUREROUTING_15)) + +/** + * @} + */ + +/** @defgroup RI_IOSwitch IO Switch + * @{ + */ +#define RI_ASCR1_REGISTER ((uint32_t)0x80000000) +/* ASCR1 I/O switch: bit 31 is set to '1' to indicate that the mask is in ASCR1 register */ +#define RI_IOSWITCH_CH0 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_0) +#define RI_IOSWITCH_CH1 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_1) +#define RI_IOSWITCH_CH2 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_2) +#define RI_IOSWITCH_CH3 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_3) +#define RI_IOSWITCH_CH4 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_4) +#define RI_IOSWITCH_CH5 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_5) +#define RI_IOSWITCH_CH6 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_6) +#define RI_IOSWITCH_CH7 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_7) +#define RI_IOSWITCH_CH8 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_8) +#define RI_IOSWITCH_CH9 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_9) +#define RI_IOSWITCH_CH10 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_10) +#define RI_IOSWITCH_CH11 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_11) +#define RI_IOSWITCH_CH12 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_12) +#define RI_IOSWITCH_CH13 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_13) +#define RI_IOSWITCH_CH14 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_14) +#define RI_IOSWITCH_CH15 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_15) +#define RI_IOSWITCH_CH18 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_18) +#define RI_IOSWITCH_CH19 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_19) +#define RI_IOSWITCH_CH20 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_20) +#define RI_IOSWITCH_CH21 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_21) +#define RI_IOSWITCH_CH22 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_22) +#define RI_IOSWITCH_CH23 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_23) +#define RI_IOSWITCH_CH24 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_24) +#define RI_IOSWITCH_CH25 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_25) +#define RI_IOSWITCH_VCOMP ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_VCOMP) /* VCOMP (ADC channel 26) is an internal switch used to connect selected channel to COMP1 non inverting input */ +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH27 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_27) +#define RI_IOSWITCH_CH28 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_28) +#define RI_IOSWITCH_CH29 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_29) +#define RI_IOSWITCH_CH30 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_30) +#define RI_IOSWITCH_CH31 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_31) +#endif /* RI_ASCR2_CH1b */ + +/* ASCR2 IO switch: bit 31 is set to '0' to indicate that the mask is in ASCR2 register */ +#define RI_IOSWITCH_GR10_1 ((uint32_t)RI_ASCR2_GR10_1) +#define RI_IOSWITCH_GR10_2 ((uint32_t)RI_ASCR2_GR10_2) +#define RI_IOSWITCH_GR10_3 ((uint32_t)RI_ASCR2_GR10_3) +#define RI_IOSWITCH_GR10_4 ((uint32_t)RI_ASCR2_GR10_4) +#define RI_IOSWITCH_GR6_1 ((uint32_t)RI_ASCR2_GR6_1) +#define RI_IOSWITCH_GR6_2 ((uint32_t)RI_ASCR2_GR6_2) +#define RI_IOSWITCH_GR5_1 ((uint32_t)RI_ASCR2_GR5_1) +#define RI_IOSWITCH_GR5_2 ((uint32_t)RI_ASCR2_GR5_2) +#define RI_IOSWITCH_GR5_3 ((uint32_t)RI_ASCR2_GR5_3) +#define RI_IOSWITCH_GR4_1 ((uint32_t)RI_ASCR2_GR4_1) +#define RI_IOSWITCH_GR4_2 ((uint32_t)RI_ASCR2_GR4_2) +#define RI_IOSWITCH_GR4_3 ((uint32_t)RI_ASCR2_GR4_3) +#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3, Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH0b ((uint32_t)RI_ASCR2_CH0b) +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ +#define RI_IOSWITCH_CH1b ((uint32_t)RI_ASCR2_CH1b) +#define RI_IOSWITCH_CH2b ((uint32_t)RI_ASCR2_CH2b) +#define RI_IOSWITCH_CH3b ((uint32_t)RI_ASCR2_CH3b) +#define RI_IOSWITCH_CH6b ((uint32_t)RI_ASCR2_CH6b) +#define RI_IOSWITCH_CH7b ((uint32_t)RI_ASCR2_CH7b) +#define RI_IOSWITCH_CH8b ((uint32_t)RI_ASCR2_CH8b) +#define RI_IOSWITCH_CH9b ((uint32_t)RI_ASCR2_CH9b) +#define RI_IOSWITCH_CH10b ((uint32_t)RI_ASCR2_CH10b) +#define RI_IOSWITCH_CH11b ((uint32_t)RI_ASCR2_CH11b) +#define RI_IOSWITCH_CH12b ((uint32_t)RI_ASCR2_CH12b) +#endif /* RI_ASCR2_CH1b */ +#define RI_IOSWITCH_GR6_3 ((uint32_t)RI_ASCR2_GR6_3) +#define RI_IOSWITCH_GR6_4 ((uint32_t)RI_ASCR2_GR6_4) +#endif /* RI_ASCR2_CH0b */ + + +#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_CH27) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH28) || ((__IOSWITCH__) == RI_IOSWITCH_CH29) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH30) || ((__IOSWITCH__) == RI_IOSWITCH_CH31) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_4) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH0b) || ((__IOSWITCH__) == RI_IOSWITCH_CH1b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2b) || ((__IOSWITCH__) == RI_IOSWITCH_CH3b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6b) || ((__IOSWITCH__) == RI_IOSWITCH_CH7b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8b) || ((__IOSWITCH__) == RI_IOSWITCH_CH9b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10b) || ((__IOSWITCH__) == RI_IOSWITCH_CH11b) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12b)) + +#else /* !RI_ASCR2_CH1b */ + +#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || ((__IOSWITCH__) == RI_IOSWITCH_CH0b)) + +#else /* !RI_ASCR2_CH0b */ /* STM32L1 devices category Cat.1 and Cat.2 */ + +#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ + ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ + ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ + ((__IOSWITCH__) == RI_IOSWITCH_GR4_3)) + +#endif /* RI_ASCR2_CH0b */ +#endif /* RI_ASCR2_CH1b */ + +/** + * @} + */ + +/** @defgroup RI_Pin PIN define + * @{ + */ +#define RI_PIN_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define RI_PIN_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define RI_PIN_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define RI_PIN_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define RI_PIN_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define RI_PIN_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define RI_PIN_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define RI_PIN_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define RI_PIN_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define RI_PIN_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define RI_PIN_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define RI_PIN_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define RI_PIN_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define RI_PIN_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define RI_PIN_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define RI_PIN_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define RI_PIN_ALL ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_RI_PIN(__PIN__) ((__PIN__) != (uint16_t)0x00) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Macros DBGMCU: Debug MCU + * @{ + */ + +/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode + * @brief Freeze/Unfreeze Peripherals in Debug mode + * @{ + */ + +/** + * @brief TIM2 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_FREEZE_TIM2_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_UNFREEZE_TIM2_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#endif + +/** + * @brief TIM3 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_FREEZE_TIM3_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_UNFREEZE_TIM3_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#endif + +/** + * @brief TIM4 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#define __HAL_FREEZE_TIM4_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#define __HAL_UNFREEZE_TIM4_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) +#endif + +/** + * @brief TIM5 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#define __HAL_FREEZE_TIM5_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#define __HAL_UNFREEZE_TIM5_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) +#endif + +/** + * @brief TIM6 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_FREEZE_TIM6_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_UNFREEZE_TIM6_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#endif + +/** + * @brief TIM7 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_FREEZE_TIM7_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_UNFREEZE_TIM7_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#endif + +/** + * @brief RTC Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_FREEZE_RTC_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_UNFREEZE_RTC_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#endif + +/** + * @brief WWDG Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_FREEZE_WWDG_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_UNFREEZE_WWDG_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#endif + +/** + * @brief IWDG Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_FREEZE_IWDG_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_UNFREEZE_IWDG_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#endif + +/** + * @brief I2C1 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) +#endif + +/** + * @brief I2C2 Peripherals Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) +#endif + +/** + * @brief TIM9 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#define __HAL_FREEZE_TIM9_DBGMCU() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#define __HAL_UNFREEZE_TIM9_DBGMCU() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) +#endif + +/** + * @brief TIM10 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#define __HAL_FREEZE_TIM10_DBGMCU() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#define __HAL_UNFREEZE_TIM10_DBGMCU() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) +#endif + +/** + * @brief TIM11 Peripherals Debug mode + */ +#if defined (DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#define __HAL_FREEZE_TIM11_DBGMCU() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#define __HAL_UNFREEZE_TIM11_DBGMCU() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) +#endif + +/** + * @brief Enables or disables the output of internal reference voltage + * (VREFINT) on I/O pin. + * The VREFINT output can be routed to any I/O in group 3: + * - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1). + * - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2). + * - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2), + * CH1b (PF11) or CH2b (PF12). + * Note: Comparator peripheral clock must be preliminarility enabled, + * either in COMP user function "HAL_COMP_MspInit()" (should be + * done if comparators are used) or by direct clock enable: + * Refer to macro "__COMP_CLK_ENABLE()". + * Note: In addition with this macro, Vrefint output buffer must be + * connected to the selected I/O pin. Refer to macro + * "__HAL_RI_IOSWITCH_CLOSE()". + * @note ENABLE: Internal reference voltage connected to I/O group 3 + * @note DISABLE: Internal reference voltage disconnected from I/O group 3 + * @retval None + */ +#define __HAL_VREFINT_OUT_ENABLE() SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) +#define __HAL_VREFINT_OUT_DISABLE() CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Macros SYSCFG: SYStem ConFiG + * @{ + */ + +/** @defgroup SYSCFG_BootModeConfig Boot Mode Configuration + * @{ + */ + +/** + * @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1) + +#if defined(FSMC_R_BASE) +/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 + */ +#define __HAL_REMAPMEMORY_FSMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) + +#endif /* FSMC_R_BASE */ + +/** + * @brief Returns the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values: + * @arg SYSCFG_BOOT_MAINFLASH + * @arg SYSCFG_BOOT_SYSTEMFLASH + * @arg SYSCFG_BOOT_FSMC (available only for STM32L151xD, STM32L152xD & STM32L162xD) + * @arg SYSCFG_BOOT_SRAM + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE) + +/** + * @} + */ + +/** @defgroup SYSCFG_USBConfig USB DP line Configuration + * @{ + */ + +/** + * @brief Control the internal pull-up on USB DP line. + */ +#define __HAL_SYSCFG_USBPULLUP_ENABLE() SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) + +#define __HAL_SYSCFG_USBPULLUP_DISABLE() CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RI_Macris RI: Routing Interface + * @{ + */ + +/** @defgroup RI_InputCaputureConfig Input Capture configuration + * @{ + */ + +/** + * @brief Configures the routing interface to map Input Capture 1 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * e.g. + * __HAL_RI_REMAP_INPUTCAPTURE1(TIM_SELECT_TIM2, RI_INPUTCAPTUREROUTING_1) + * allows routing of Input capture IC1 of TIM2 to PA4. + * For details about correspondence between RI_INPUTCAPTUREROUTING_x + * and I/O pins refer to the parameters' description in the header file + * or refer to the product reference manual. + * @note Input capture selection bits are not reset by this function. + * To reset input capture selection bits, use SYSCFG_RIDeInit() function. + * @note The I/O should be configured in alternate function mode (AF14) using + * GPIO_PinAFConfig() function. + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE1(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC1); \ + MODIFY_REG(RI->ICR, RI_ICR_IC1OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC1OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 2 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE2(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC2); \ + MODIFY_REG(RI->ICR, RI_ICR_IC2OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC2OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 3 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE3(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC3); \ + MODIFY_REG(RI->ICR, RI_ICR_IC3OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC3OS)); \ + }while(0) + +/** + * @brief Configures the routing interface to map Input Capture 4 of TIMx to a selected I/O pin. + * @param __TIMSELECT__: Timer select. + * This parameter can be one of the following values: + * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. + * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. + * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. + * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. + * @param __INPUT__: selects which pin to be routed to Input Capture. + * This parameter must be a value of @ref RI_InputCaptureRouting + * @retval None. + */ +#define __HAL_RI_REMAP_INPUTCAPTURE4(__TIMSELECT__, __INPUT__) \ + do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ + assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ + MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ + SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC4); \ + MODIFY_REG(RI->ICR, RI_ICR_IC4OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC4OS)); \ + }while(0) + +/** + * @} + */ + +/** @defgroup RI_SwitchControlConfig Switch Control configuration + * @{ + */ + +/** + * @brief Enable or disable the switch control mode. + * @note ENABLE: ADC analog switches closed if the corresponding + * I/O switch is also closed. + * When using COMP1, switch control mode must be enabled. + * @note DISABLE: ADC analog switches open or controlled by the ADC interface. + * When using the ADC for acquisition, switch control mode + * must be disabled. + * @note COMP1 comparator and ADC cannot be used at the same time since + * they share the ADC switch matrix. + * @retval None + */ +#define __HAL_RI_SWITCHCONTROLMODE_ENABLE() SET_BIT(RI->ASCR1, RI_ASCR1_SCM) + +#define __HAL_RI_SWITCHCONTROLMODE_DISABLE() CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM) + +/* + * @brief Close or Open the routing interface Input Output switches. + * @param __IOSWITCH__: selects the I/O analog switch number. + * This parameter must be a value of @ref RI_IOSwitch + * @retval None + */ +#define __HAL_RI_IOSWITCH_CLOSE(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ + if ((__IOSWITCH__) >> 31 != 0 ) \ + { \ + SET_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ + } \ + else \ + { \ + SET_BIT(RI->ASCR2, (__IOSWITCH__)); \ + } \ + }while(0) + +#define __HAL_RI_IOSWITCH_OPEN(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ + if ((__IOSWITCH__) >> 31 != 0 ) \ + { \ + CLEAR_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ + } \ + else \ + { \ + CLEAR_BIT(RI->ASCR2, (__IOSWITCH__)); \ + } \ + }while(0) + +#if defined (COMP_CSR_SW1) +/** + * @brief Close or open the internal switch COMP1_SW1. + * This switch connects I/O pin PC3 (can be used as ADC channel 13) + * and OPAMP3 ouput to ADC switch matrix (ADC channel VCOMP, channel + * 26) and COMP1 non-inverting input. + * Pin PC3 connection depends on another switch setting, refer to + * macro "__HAL_ADC_CHANNEL_SPEED_FAST()". + * @retval None. + */ +#define __HAL_RI_SWITCH_COMP1_SW1_CLOSE() SET_BIT(COMP->CSR, COMP_CSR_SW1) + +#define __HAL_RI_SWITCH_COMP1_SW1_OPEN() CLEAR_BIT(COMP->CSR, COMP_CSR_SW1) +#endif /* COMP_CSR_SW1 */ + +/** + * @} + */ + +/** @defgroup RI_HystConfig Hysteresis Activation and Deactivation + * @{ + */ + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports A + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTA_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR1, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTA_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR1, (__IOPIN__)); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports B + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTB_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTB_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports C + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTC_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR2, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTC_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR2, (__IOPIN__)); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports D + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTD_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTD_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ + } while(0) + +#if defined (GPIOE_BASE) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports E + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTE_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR3, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTE_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR3, (__IOPIN__)); \ + } while(0) + +#endif /* GPIOE_BASE */ + +#if defined(GPIOF_BASE) || defined(GPIOG_BASE) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports F + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTF_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTF_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ + } while(0) + +/** + * @brief Enable or disable Hysteresis of the input schmitt triger of Ports G + * When the I/Os are programmed in input mode by standard I/O port + * registers, the Schmitt trigger and the hysteresis are enabled by default. + * When hysteresis is disabled, it is possible to read the + * corresponding port with a trigger level of VDDIO/2. + * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. + * This parameter must be a value of @ref RI_Pin + * @retval None + */ +#define __HAL_RI_HYSTERIS_PORTG_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + CLEAR_BIT(RI->HYSCR4, (__IOPIN__)); \ + } while(0) + +#define __HAL_RI_HYSTERIS_PORTG_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ + SET_BIT(RI->HYSCR4, (__IOPIN__)); \ + } while(0) + +#endif /* GPIOF_BASE || GPIOG_BASE */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(__IO uint32_t Delay); +uint32_t HAL_GetTick(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +void HAL_EnableDBGSleepMode(void); +void HAL_DisableDBGSleepMode(void); +void HAL_EnableDBGStopMode(void); +void HAL_DisableDBGStopMode(void); +void HAL_EnableDBGStandbyMode(void); +void HAL_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |