diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE')
19 files changed, 9304 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/startup_stm32l152xe.s b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/startup_stm32l152xe.s new file mode 100644 index 0000000000..c8427bfbc9 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/startup_stm32l152xe.s @@ -0,0 +1,325 @@ +; STM32L152RE Ultra Low Power High-density Devices vector table for MDK ARM_MICRO toolchain +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp + +Stack_Mem SPACE Stack_Size +__initial_sp EQU 0x20014000 ; Top of RAM (80 KB) + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000400 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit + +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit EQU (__initial_sp - Stack_Size) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp + DCD RTC_WKUP_IRQHandler ; RTC Wakeup + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD DAC_IRQHandler ; DAC + DCD COMP_IRQHandler ; COMP through EXTI Line + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD LCD_IRQHandler ; LCD + DCD TIM9_IRQHandler ; TIM9 + DCD TIM10_IRQHandler ; TIM10 + DCD TIM11_IRQHandler ; TIM11 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD 0 ; Reserved + DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT DAC_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT TIM9_IRQHandler [WEAK] + EXPORT TIM10_IRQHandler [WEAK] + EXPORT TIM11_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USB_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT COMP_ACQ_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +DAC_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +LCD_IRQHandler +TIM9_IRQHandler +TIM10_IRQHandler +TIM11_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USB_FS_WKUP_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +COMP_ACQ_IRQHandler + + B . + + ENDP + + ALIGN + END diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l152re.sct b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l152re.sct new file mode 100644 index 0000000000..89bb049bd6 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l152re.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32L152RE: 512KB FLASH + 80KB SRAM +LR_IROM1 0x08000000 0x80000 { ; load region size_region + + ER_IROM1 0x08000000 0x80000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 73 vectors = 292 bytes (0x124) to be reserved in RAM + RW_IRAM1 (0x20000000+0x124) (0x14000-0x124) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.cpp b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.cpp new file mode 100644 index 0000000000..bb665909b9 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <rt_misc.h> +#include <stdint.h> + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/startup_stm32l152xe.s b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/startup_stm32l152xe.s new file mode 100644 index 0000000000..d1bf1611a2 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/startup_stm32l152xe.s @@ -0,0 +1,298 @@ +; STM32L152RE Ultra Low Power High-density Devices vector table for MDK ARM_STD toolchain +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +__initial_sp EQU 0x20014000 ; Top of RAM (80 KB) + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp + DCD RTC_WKUP_IRQHandler ; RTC Wakeup + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD DAC_IRQHandler ; DAC + DCD COMP_IRQHandler ; COMP through EXTI Line + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD LCD_IRQHandler ; LCD + DCD TIM9_IRQHandler ; TIM9 + DCD TIM10_IRQHandler ; TIM10 + DCD TIM11_IRQHandler ; TIM11 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD 0 ; Reserved + DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT DAC_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT LCD_IRQHandler [WEAK] + EXPORT TIM9_IRQHandler [WEAK] + EXPORT TIM10_IRQHandler [WEAK] + EXPORT TIM11_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT USB_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT COMP_ACQ_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +DAC_IRQHandler +COMP_IRQHandler +EXTI9_5_IRQHandler +LCD_IRQHandler +TIM9_IRQHandler +TIM10_IRQHandler +TIM11_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +USB_FS_WKUP_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +COMP_ACQ_IRQHandler + + B . + + ENDP + + ALIGN + END diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l152re.sct b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l152re.sct new file mode 100644 index 0000000000..89bb049bd6 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l152re.sct @@ -0,0 +1,45 @@ +; Scatter-Loading Description File +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Copyright (c) 2014, STMicroelectronics +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; +; 1. Redistributions of source code must retain the above copyright notice, +; this list of conditions and the following disclaimer. +; 2. Redistributions in binary form must reproduce the above copyright notice, +; this list of conditions and the following disclaimer in the documentation +; and/or other materials provided with the distribution. +; 3. Neither the name of STMicroelectronics nor the names of its contributors +; may be used to endorse or promote products derived from this software +; without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +; STM32L152RE: 512KB FLASH + 80KB SRAM +LR_IROM1 0x08000000 0x80000 { ; load region size_region + + ER_IROM1 0x08000000 0x80000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + + ; 73 vectors = 292 bytes (0x124) to be reserved in RAM + RW_IRAM1 (0x20000000+0x124) (0x14000-0x124) { ; RW data + .ANY (+RW +ZI) + } + +} + diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.cpp b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.cpp new file mode 100644 index 0000000000..bb665909b9 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.cpp @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library - stackheap + * Setup a fixed single stack/heap memory model, + * between the top of the RW/ZI region and the stackpointer + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <rt_misc.h> +#include <stdint.h> + +extern char Image$$RW_IRAM1$$ZI$$Limit[]; + +extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) { + uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit; + uint32_t sp_limit = __current_sp(); + + zi_limit = (zi_limit + 7) & ~0x7; // ensure zi_limit is 8-byte aligned + + struct __initial_stackheap r; + r.heap_base = zi_limit; + r.heap_limit = sp_limit; + return r; +} + +#ifdef __cplusplus +} +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE.ld b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE.ld new file mode 100644 index 0000000000..59bc2aad23 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE.ld @@ -0,0 +1,156 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + /* 512KB FLASH, 80KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292 + * bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138 + */ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512k + RAM (rwx) : ORIGIN = 0x2000013C, LENGTH = 0x14000-0x13C +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * _estack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text*) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + _sidata = .; + + .data : AT (__etext) + { + __data_start__ = .; + _sdata = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + _edata = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + _sbss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + _ebss = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + _estack = __StackTop; + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/startup_stm32l152xe.s b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/startup_stm32l152xe.s new file mode 100644 index 0000000000..d37ec08c9c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/startup_stm32l152xe.s @@ -0,0 +1,427 @@ +/** + ****************************************************************************** + * @file startup_stm32l152xe.s + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief STM32L152XE Devices vector table for + * Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word DAC_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word LCD_IRQHandler + .word TIM9_IRQHandler + .word TIM10_IRQHandler + .word TIM11_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USB_FS_WKUP_IRQHandler + .word TIM6_IRQHandler + .word TIM7_IRQHandler + .word 0 + .word TIM5_IRQHandler + .word SPI3_IRQHandler + .word UART4_IRQHandler + .word UART5_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word 0 + .word COMP_ACQ_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32L152XE devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_STAMP_IRQHandler + .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak DAC_IRQHandler + .thumb_set DAC_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak TIM9_IRQHandler + .thumb_set TIM9_IRQHandler,Default_Handler + + .weak TIM10_IRQHandler + .thumb_set TIM10_IRQHandler,Default_Handler + + .weak TIM11_IRQHandler + .thumb_set TIM11_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USB_FS_WKUP_IRQHandler + .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM6_IRQHandler + .thumb_set TIM6_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak COMP_ACQ_IRQHandler + .thumb_set COMP_ACQ_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/startup_stm32l152xe.s b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/startup_stm32l152xe.s new file mode 100644 index 0000000000..9b956b65e7 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/startup_stm32l152xe.s @@ -0,0 +1,546 @@ +;/******************** (C) COPYRIGHT 2014 STMicroelectronics ******************** +;* File Name : startup_stm32l152xe.s +;* Author : MCD Application Team +;* Version : V2.0.0 +;* Date : 5-September-2014 +;* Description : STM32L152XE Devices vector for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == __iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Configure the system clock +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_STAMP_IRQHandler ; Tamper and Time Stamp + DCD RTC_WKUP_IRQHandler ; RTC Wakeup + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD DAC_IRQHandler ; DAC + DCD COMP_IRQHandler ; COMP through EXTI Line + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD LCD_IRQHandler ; LCD + DCD TIM9_IRQHandler ; TIM9 + DCD TIM10_IRQHandler ; TIM10 + DCD TIM11_IRQHandler ; TIM11 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USB_FS_WKUP_IRQHandler ; USB FS Wakeup from suspend + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD 0 ; Reserved + DCD COMP_ACQ_IRQHandler ; Comparator Channel Acquisition + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:REORDER:NOROOT(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +NMI_Handler + B NMI_Handler + + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Handler + B HardFault_Handler + + + PUBWEAK MemManage_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +MemManage_Handler + B MemManage_Handler + + + PUBWEAK BusFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BusFault_Handler + B BusFault_Handler + + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UsageFault_Handler + B UsageFault_Handler + + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SVC_Handler + B SVC_Handler + + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DebugMon_Handler + B DebugMon_Handler + + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PendSV_Handler + B PendSV_Handler + + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +PVD_IRQHandler + B PVD_IRQHandler + + + PUBWEAK TAMPER_STAMP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TAMPER_STAMP_IRQHandler + B TAMPER_STAMP_IRQHandler + + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RCC_IRQHandler + B RCC_IRQHandler + + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + + PUBWEAK USB_HP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USB_HP_IRQHandler + B USB_HP_IRQHandler + + + PUBWEAK USB_LP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USB_LP_IRQHandler + B USB_LP_IRQHandler + + + PUBWEAK DAC_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DAC_IRQHandler + B DAC_IRQHandler + + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +COMP_IRQHandler + B COMP_IRQHandler + + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + + PUBWEAK LCD_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +LCD_IRQHandler + B LCD_IRQHandler + + + PUBWEAK TIM9_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM9_IRQHandler + B TIM9_IRQHandler + + + PUBWEAK TIM10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM10_IRQHandler + B TIM10_IRQHandler + + + PUBWEAK TIM11_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM11_IRQHandler + B TIM11_IRQHandler + + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART1_IRQHandler + B USART1_IRQHandler + + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART2_IRQHandler + B USART2_IRQHandler + + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USART3_IRQHandler + B USART3_IRQHandler + + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + + PUBWEAK USB_FS_WKUP_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +USB_FS_WKUP_IRQHandler + B USB_FS_WKUP_IRQHandler + + + PUBWEAK TIM6_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM6_IRQHandler + B TIM6_IRQHandler + + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +UART4_IRQHandler + B UART4_IRQHandler + + + PUBWEAK UART5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +UART5_IRQHandler + B UART5_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + + PUBWEAK COMP_ACQ_IRQHandler + SECTION .text:CODE:REORDER:NOROOT(1) +COMP_ACQ_IRQHandler + B COMP_ACQ_IRQHandler + + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l152xe.icf b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l152xe.icf new file mode 100644 index 0000000000..9e1721e17c --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l152xe.icf @@ -0,0 +1,31 @@ +/* [ROM = 64kb = 0x10000] */ +define symbol __intvec_start__ = 0x08000000; +define symbol __region_ROM_start__ = 0x08000000; +define symbol __region_ROM_end__ = 0x0807FFFF; + +/* [RAM = 80kb = 0x14000] Vector table dynamic copy: 73 vectors = 292 bytes (0x124) to be reserved in RAM */ +define symbol __NVIC_start__ = 0x20000000; +define symbol __NVIC_end__ = 0x20000127; /* Add 4 more bytes to be aligned on 8 bytes */ +define symbol __region_RAM_start__ = 0x20000128; +define symbol __region_RAM_end__ = 0x20013FFF; + +/* Memory regions */ +define memory mem with size = 4G; +define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__]; +define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__]; + +/* Stack and Heap */ +/*Heap 1/4 of ram and stack 1/8*/ +define symbol __size_cstack__ = 0x2800; +define symbol __size_heap__ = 0x5000; +define block CSTACK with alignment = 8, size = __size_cstack__ { }; +define block HEAP with alignment = 8, size = __size_heap__ { }; +define block STACKHEAP with fixed order { block HEAP, block CSTACK }; + +initialize by copy with packing = zeros { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, block STACKHEAP }; diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis.h new file mode 100644 index 0000000000..8c32259ba3 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis.h @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32l1xx.h" +#include "cmsis_nvic.h" + +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.c new file mode 100644 index 0000000000..2da63fc9af --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.c @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "cmsis_nvic.h" + +#define NVIC_RAM_VECTOR_ADDRESS (0x20000000) // Vectors positioned at start of RAM +#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000) // Initial vector position in flash + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) { + uint32_t *vectors = (uint32_t *)SCB->VTOR; + uint32_t i; + + // Copy and switch to dynamic vectors if the first time called + if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) { + uint32_t *old_vectors = vectors; + vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS; + for (i=0; i<NVIC_NUM_VECTORS; i++) { + vectors[i] = old_vectors[i]; + } + SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS; + } + vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector; +} + +uint32_t NVIC_GetVector(IRQn_Type IRQn) { + uint32_t *vectors = (uint32_t*)SCB->VTOR; + return vectors[IRQn + NVIC_USER_IRQ_OFFSET]; +} diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.h new file mode 100644 index 0000000000..2911892ec3 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/cmsis_nvic.h @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * CMSIS-style functionality to support dynamic vectors + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_NVIC_H +#define MBED_CMSIS_NVIC_H + +// STM32L152RE +// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F +// MCU Peripherals: 57 vectors = 228 bytes from 0x40 to 0x123 +// Total: 73 vectors = 292 bytes (0x124) to be reserved in RAM +#define NVIC_NUM_VECTORS 73 +#define NVIC_USER_IRQ_OFFSET 16 + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector); +uint32_t NVIC_GetVector(IRQn_Type IRQn); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.c new file mode 100644 index 0000000000..ec96c6ce0d --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.c @@ -0,0 +1,121 @@ +/** + ****************************************************************************** + * @file hal_tick.c + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#include "hal_tick.h" + +TIM_HandleTypeDef TimMasterHandle; +uint32_t PreviousVal = 0; + +void us_ticker_irq_handler(void); + +void timer_irq_handler(void) { + // Channel 1 for mbed timeout + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) { + us_ticker_irq_handler(); + } + + // Channel 2 for HAL tick + if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) { + __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2); + uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle); + if ((val - PreviousVal) >= HAL_TICK_DELAY) { + // Increment HAL variable + HAL_IncTick(); + // Prepare next interrupt + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY); + PreviousVal = val; +#if 0 // For DEBUG only + HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6); +#endif + } + } +} + +// Reconfigure the HAL tick using a standard timer instead of systick. +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) { + // Enable timer clock + TIM_MST_RCC; + + // Reset timer + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; + + // Update the SystemCoreClock variable + SystemCoreClockUpdate(); + + // Configure time base + TimMasterHandle.Instance = TIM_MST; + TimMasterHandle.Init.Period = 0xFFFFFFFF; + TimMasterHandle.Init.Prescaler = (uint32_t)(SystemCoreClock / 1000000) - 1; // 1 us tick + TimMasterHandle.Init.ClockDivision = 0; + TimMasterHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + HAL_TIM_OC_Init(&TimMasterHandle); + + NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler); + NVIC_EnableIRQ(TIM_MST_IRQ); + + // Channel 1 for mbed timeout + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1); + + // Channel 2 for HAL tick + HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2); + PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle); + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY); + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); + +#if 0 // For DEBUG only + __GPIOB_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); +#endif + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.h new file mode 100644 index 0000000000..ee23af91ec --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/hal_tick.h @@ -0,0 +1,60 @@ +/** + ****************************************************************************** + * @file hal_tick.h + * @author MCD Application Team + * @brief Initialization of HAL tick + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +#ifndef __HAL_TICK_H +#define __HAL_TICK_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stm32l1xx.h" +#include "cmsis_nvic.h" + +#define TIM_MST TIM5 +#define TIM_MST_IRQ TIM5_IRQn +#define TIM_MST_RCC __TIM5_CLK_ENABLE() + +#define TIM_MST_RESET_ON __TIM5_FORCE_RESET() +#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET() + +#define HAL_TICK_DELAY (1000) // 1 ms + +#ifdef __cplusplus +} +#endif + +#endif // __HAL_TICK_H + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l152xe.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l152xe.h new file mode 100644 index 0000000000..127727d316 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l152xe.h @@ -0,0 +1,6016 @@ +/** + ****************************************************************************** + * @file stm32l152xe.h + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32L1xx devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral’s registers hardware + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l152xe + * @{ + */ + +#ifndef __STM32L152xE_H +#define __STM32L152xE_H + +#ifdef __cplusplus + extern "C" { +#endif + + + /** @addtogroup Configuration_section_for_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */ +#define __MPU_PRESENT 1 /*!< STM32L1xx provides MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32L1xx uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32L1xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ + + /*!< Interrupt Number Definition */ +typedef enum +{ +/****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32L specific Interrupt Numbers ***********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ + USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ + DAC_IRQn = 21, /*!< DAC Interrupt */ + COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + LCD_IRQn = 24, /*!< LCD Interrupt */ + TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ + TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ + TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ + TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ + TIM5_IRQn = 46, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 47, /*!< SPI3 global Interrupt */ + UART4_IRQn = 48, /*!< UART4 global Interrupt */ + UART5_IRQn = 49, /*!< UART5 global Interrupt */ + DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */ + COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32l1xx.h" +#include <stdint.h> + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ + __IO uint32_t SMPR0; /*!< ADC sample time register 0, Address offset: 0x5C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ +} ADC_Common_TypeDef; + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */ + __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ +typedef struct +{ + __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */ + __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */ + __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */ + __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */ + __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */ + __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */ + __IO uint32_t OBR; /*!< Option byte register, Address offset: 0x1c */ + __IO uint32_t WRPR1; /*!< Write protection register 1, Address offset: 0x20 */ + uint32_t RESERVED[23]; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t WRPR2; /*!< Write protection register 2, Address offset: 0x80 */ + __IO uint32_t WRPR3; /*!< Write protection register 3, Address offset: 0x84 */ + __IO uint32_t WRPR4; /*!< Write protection register 4, Address offset: 0x88 */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ +typedef struct +{ + __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */ + __IO uint32_t USER; /*!< user register, Address offset: 0x04 */ + __IO uint32_t WRP01; /*!< write protection register 0 1, Address offset: 0x08 */ + __IO uint32_t WRP23; /*!< write protection register 2 3, Address offset: 0x0C */ + __IO uint32_t WRP45; /*!< write protection register 4 5, Address offset: 0x10 */ + __IO uint32_t WRP67; /*!< write protection register 6 7, Address offset: 0x14 */ + __IO uint32_t WRP89; /*!< write protection register 8 9, Address offset: 0x18 */ + __IO uint32_t WRP1011; /*!< write protection register 10 11, Address offset: 0x1C */ + uint32_t RESERVED[24]; /*!< Reserved, 0x20 -> 0x7C */ + __IO uint32_t WRP1213; /*!< write protection register 12 13, Address offset: 0x80 */ + __IO uint32_t WRP1415; /*!< write protection register 14 15, Address offset: 0x84 */ +} OB_TypeDef; + +/** + * @brief Operational Amplifier (OPAMP) + */ +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + +/** + * @brief General Purpose IO + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function register, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */ +} GPIO_TypeDef; + +/** + * @brief SysTem Configuration + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ + __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */ + __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ + __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ + __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ + __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ +} IWDG_TypeDef; + +/** + * @brief LCD + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ + __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ + __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ + __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ +} LCD_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ + __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */ + __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */ + __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */ + __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */ +} RCC_TypeDef; + +/** + * @brief Routing Interface + */ + +typedef struct +{ + __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */ + __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */ + __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */ + __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */ + __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */ + __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */ + __IO uint32_t HYSCR4; /*!< RI Hysteresis control register, Address offset: 0x18 */ + __IO uint32_t ASMR1; /*!< RI Analog switch mode register 1, Address offset: 0x1C */ + __IO uint32_t CMR1; /*!< RI Channel mask register 1, Address offset: 0x20 */ + __IO uint32_t CICR1; /*!< RI Channel Iden for capture register 1, Address offset: 0x24 */ + __IO uint32_t ASMR2; /*!< RI Analog switch mode register 2, Address offset: 0x28 */ + __IO uint32_t CMR2; /*!< RI Channel mask register 2, Address offset: 0x2C */ + __IO uint32_t CICR2; /*!< RI Channel Iden for capture register 2, Address offset: 0x30 */ + __IO uint32_t ASMR3; /*!< RI Analog switch mode register 3, Address offset: 0x34 */ + __IO uint32_t CMR3; /*!< RI Channel mask register 3, Address offset: 0x38 */ + __IO uint32_t CICR3; /*!< RI Channel Iden for capture register 3, Address offset: 0x3C */ + __IO uint32_t ASMR4; /*!< RI Analog switch mode register 4, Address offset: 0x40 */ + __IO uint32_t CMR4; /*!< RI Channel mask register 4, Address offset: 0x44 */ + __IO uint32_t CICR4; /*!< RI Channel Iden for capture register 4, Address offset: 0x48 */ + __IO uint32_t ASMR5; /*!< RI Analog switch mode register 5, Address offset: 0x4C */ + __IO uint32_t CMR5; /*!< RI Channel mask register 5, Address offset: 0x50 */ + __IO uint32_t CICR5; /*!< RI Channel Iden for capture register 5, Address offset: 0x54 */ +} RI_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + uint32_t RESERVED7; /*!< Reserved, 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief TIM + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + uint32_t RESERVED12; /*!< Reserved, 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + uint32_t RESERVED17; /*!< Reserved, 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ +} TIM_TypeDef; +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ +} USB_TypeDef; + +/** + * @brief Window WATCHDOG + */ +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define FLASH_EEPROM_BASE ((uint32_t)(FLASH_BASE + 0x80000)) /*!< FLASH EEPROM base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ +#define FLASH_BANK2_BASE ((uint32_t)0x08040000) /*!< FLASH BANK2 base address in the alias region */ +#define FLASH_BANK1_END ((uint32_t)0x0803FFFF) /*!< Program end FLASH BANK1 address */ +#define FLASH_BANK2_END ((uint32_t)0x0807FFFF) /*!< Program end FLASH BANK2 address */ +#define FLASH_EEPROM_END ((uint32_t)0x08083FFF) /*!< FLASH EEPROM end address (16KB) */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400) +#define LCD_BASE (APB1PERIPH_BASE + 0x00002400) +#define RTC_BASE (APB1PERIPH_BASE + 0x00002800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x00004400) +#define USART3_BASE (APB1PERIPH_BASE + 0x00004800) +#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x00005000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800) + +/* USB device FS */ +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */ + +/* USB device FS SRAM */ +#define PWR_BASE (APB1PERIPH_BASE + 0x00007000) +#define DAC_BASE (APB1PERIPH_BASE + 0x00007400) +#define COMP_BASE (APB1PERIPH_BASE + 0x00007C00) +#define RI_BASE (APB1PERIPH_BASE + 0x00007C04) +#define OPAMP_BASE (APB1PERIPH_BASE + 0x00007C5C) + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400) +#define TIM9_BASE (APB2PERIPH_BASE + 0x00000800) +#define TIM10_BASE (APB2PERIPH_BASE + 0x00000C00) +#define TIM11_BASE (APB2PERIPH_BASE + 0x00001000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x00002400) +#define ADC_BASE (APB2PERIPH_BASE + 0x00002700) +#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000) +#define USART1_BASE (APB2PERIPH_BASE + 0x00003800) + +/*!< AHB peripherals */ +#define GPIOA_BASE (AHBPERIPH_BASE + 0x00000000) +#define GPIOB_BASE (AHBPERIPH_BASE + 0x00000400) +#define GPIOC_BASE (AHBPERIPH_BASE + 0x00000800) +#define GPIOD_BASE (AHBPERIPH_BASE + 0x00000C00) +#define GPIOE_BASE (AHBPERIPH_BASE + 0x00001000) +#define GPIOH_BASE (AHBPERIPH_BASE + 0x00001400) +#define GPIOF_BASE (AHBPERIPH_BASE + 0x00001800) +#define GPIOG_BASE (AHBPERIPH_BASE + 0x00001C00) +#define CRC_BASE (AHBPERIPH_BASE + 0x00003000) +#define RCC_BASE (AHBPERIPH_BASE + 0x00003800) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00003C00) /*!< FLASH registers base address */ +#define OB_BASE ((uint32_t)0x1FF80000) /*!< FLASH Option Bytes base address */ +#define DMA1_BASE (AHBPERIPH_BASE + 0x00006000) +#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x00006400) +#define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058) +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define LCD ((LCD_TypeDef *) LCD_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +/* USB device FS */ +#define USB ((USB_TypeDef *) USB_BASE) +/* USB device FS SRAM */ +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define COMP ((COMP_TypeDef *) COMP_BASE) +#define COMP1 ((COMP_TypeDef *) COMP_BASE) +#define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000001)) +#define RI ((RI_TypeDef *) RI_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP2 ((OPAMP_TypeDef *) (OPAMP_BASE + 0x00000001)) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + + /** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ +/******************************************************************************/ +/* */ +/* Analog to Digital Converter (ADC) */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint32_t)0x00000001) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint32_t)0x00000002) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint32_t)0x00000010) /*!< Regular channel Start flag */ +#define ADC_SR_OVR ((uint32_t)0x00000020) /*!< Overrun flag */ +#define ADC_SR_ADONS ((uint32_t)0x00000040) /*!< ADC ON status */ +#define ADC_SR_RCNR ((uint32_t)0x00000100) /*!< Regular channel not ready flag */ +#define ADC_SR_JCNR ((uint32_t)0x00000200) /*!< Injected channel not ready flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_PDD ((uint32_t)0x00010000) /*!< Power Down during Delay phase */ +#define ADC_CR1_PDI ((uint32_t)0x00020000) /*!< Power Down during Idle phase */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + +#define ADC_CR1_RES ((uint32_t)0x03000000) /*!< RES[1:0] bits (Resolution) */ +#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */ + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */ + +#define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */ +#define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define ADC_CR2_DELS_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define ADC_CR2_DELS_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!< DMA disable selection (Single ADC) */ +#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!< End of conversion selection */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!< JEXTSEL[3:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!< JEXTEN[1:0] bits (External Trigger Conversion mode for injected channels) */ +#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!< Start Conversion of injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!< EXTSEL[3:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */ +#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!< Start Conversion of regular channels */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP20 ((uint32_t)0x00000007) /*!< SMP20[2:0] bits (Channel 20 Sample time selection) */ +#define ADC_SMPR1_SMP20_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP20_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP20_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP21 ((uint32_t)0x00000038) /*!< SMP21[2:0] bits (Channel 21 Sample time selection) */ +#define ADC_SMPR1_SMP21_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP21_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP21_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP22 ((uint32_t)0x000001C0) /*!< SMP22[2:0] bits (Channel 22 Sample time selection) */ +#define ADC_SMPR1_SMP22_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP22_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP22_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP23 ((uint32_t)0x00000E00) /*!< SMP23[2:0] bits (Channel 23 Sample time selection) */ +#define ADC_SMPR1_SMP23_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP23_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP23_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP24 ((uint32_t)0x00007000) /*!< SMP24[2:0] bits (Channel 24 Sample time selection) */ +#define ADC_SMPR1_SMP24_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP24_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP24_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP25 ((uint32_t)0x00038000) /*!< SMP25[2:0] bits (Channel 25 Sample time selection) */ +#define ADC_SMPR1_SMP25_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */ +#define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */ +#define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */ +#define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */ +#define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< SMP18[2:0] bits (Channel 18 Sample time selection) */ +#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP19 ((uint32_t)0x38000000) /*!< SMP19[2:0] bits (Channel 19 Sample time selection) */ +#define ADC_SMPR2_SMP19_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP19_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP19_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR3 register *******************/ +#define ADC_SMPR3_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR3_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR3_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR3_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR3_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR3_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR3_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR3_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR3_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR3_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR3_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR3_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR3_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR3_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR3_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint32_t)0x00000FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_L ((uint32_t)0x01F00000) /*!< L[4:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR1_L_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */ +#define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */ +#define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ27_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ27_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */ +#define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */ +#define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */ +#define ADC_SQR2_SQ19_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ19_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ19_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ19_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ19_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ20 ((uint32_t)0x000003E0) /*!< SQ20[4:0] bits (20th conversion in regular sequence) */ +#define ADC_SQR2_SQ20_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ20_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ20_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ20_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ20_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ21 ((uint32_t)0x00007C00) /*!< SQ21[4:0] bits (21th conversion in regular sequence) */ +#define ADC_SQR2_SQ21_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ21_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ21_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ21_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ21_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ22 ((uint32_t)0x000F8000) /*!< SQ22[4:0] bits (22th conversion in regular sequence) */ +#define ADC_SQR2_SQ22_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ22_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ22_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ22_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ22_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ23 ((uint32_t)0x01F00000) /*!< SQ23[4:0] bits (23th conversion in regular sequence) */ +#define ADC_SQR2_SQ23_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ23_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ23_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ23_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ23_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ24 ((uint32_t)0x3E000000) /*!< SQ24[4:0] bits (24th conversion in regular sequence) */ +#define ADC_SQR2_SQ24_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ24_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ24_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ24_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ24_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR3_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR3_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR3_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR3_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ17 ((uint32_t)0x01F00000) /*!< SQ17[4:0] bits (17th conversion in regular sequence) */ +#define ADC_SQR3_SQ17_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ17_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ17_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ17_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ17_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ18 ((uint32_t)0x3E000000) /*!< SQ18[4:0] bits (18th conversion in regular sequence) */ +#define ADC_SQR3_SQ18_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ18_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ18_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ18_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ18_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR4 register *******************/ +#define ADC_SQR4_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR4_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR4_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR4_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR4_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR4_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR4_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR4_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR4_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR4_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR4_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR4_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR4_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR4_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR4_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR4_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR4_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR4_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR4_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR4_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR4_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR4_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR4_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR4_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR4_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR4_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR4_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR4_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR4_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR4_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR4_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR4_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR4_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR4_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR4_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR4_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR5 register *******************/ +#define ADC_SQR5_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR5_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR5_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR5_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR5_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR5_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR5_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR5_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR5_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR5_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR5_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR5_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR5_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR5_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR5_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR5_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR5_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR5_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR5_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR5_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR5_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR5_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR5_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR5_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR5_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR5_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR5_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR5_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR5_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR5_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR5_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR5_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR5_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR5_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR5_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR5_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ + +/****************** Bit definition for ADC_SMPR0 register *******************/ +#define ADC_SMPR0_SMP30 ((uint32_t)0x00000007) /*!< SMP30[2:0] bits (Channel 30 Sample time selection) */ +#define ADC_SMPR0_SMP30_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR0_SMP30_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR0_SMP30_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR0_SMP31 ((uint32_t)0x00000038) /*!< SMP31[2:0] bits (Channel 31 Sample time selection) */ +#define ADC_SMPR0_SMP31_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR0_SMP31_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR0_SMP31_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +/******************* Bit definition for ADC_CSR register ********************/ +#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */ +#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!< ADC1 End of conversion */ +#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!< ADC1 Injected channel end of conversion */ +#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!< ADC1 Injected channel Start flag */ +#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!< ADC1 Regular channel Start flag */ +#define ADC_CSR_OVR1 ((uint32_t)0x00000020) /*!< ADC1 overrun flag */ +#define ADC_CSR_ADONS1 ((uint32_t)0x00000040) /*!< ADON status of ADC1 */ + +/******************* Bit definition for ADC_CCR register ********************/ +#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/ +#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/******************************************************************************/ +/* */ +/* Analog Comparators (COMP) */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for COMP_CSR register ********************/ +#define COMP_CSR_10KPU ((uint32_t)0x00000001) /*!< 10K pull-up resistor */ +#define COMP_CSR_400KPU ((uint32_t)0x00000002) /*!< 400K pull-up resistor */ +#define COMP_CSR_10KPD ((uint32_t)0x00000004) /*!< 10K pull-down resistor */ +#define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */ +#define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */ +#define COMP_CSR_SW1 ((uint32_t)0x00000020) /*!< SW1 analog switch enable */ +#define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */ + +#define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */ +#define COMP_CSR_CMP2OUT ((uint32_t)0x00002000) /*!< Comparator 2 ouput */ +#define COMP_CSR_VREFOUTEN ((uint32_t)0x00010000) /*!< Comparator Vref Enable */ +#define COMP_CSR_WNDWE ((uint32_t)0x00020000) /*!< Window mode enable */ +#define COMP_CSR_INSEL ((uint32_t)0x001C0000) /*!< INSEL[2:0] Inversion input Selection */ +#define COMP_CSR_INSEL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define COMP_CSR_INSEL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define COMP_CSR_INSEL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define COMP_CSR_OUTSEL ((uint32_t)0x00E00000) /*!< OUTSEL[2:0] comparator 2 output redirection */ +#define COMP_CSR_OUTSEL_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */ +#define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */ +#define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */ + +#define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */ +#define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */ +#define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */ + +/******************************************************************************/ +/* */ +/* Operational Amplifier (OPAMP) */ +/* */ +/******************************************************************************/ +/******************* Bit definition for OPAMP_CSR register ******************/ +#define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */ +#define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */ +#define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */ +#define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */ +#define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */ +#define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */ +#define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */ +#define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */ +#define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */ +#define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */ +#define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */ +#define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */ +#define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */ +#define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */ +#define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */ +#define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */ +#define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */ +#define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */ +#define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */ +#define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */ +#define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */ +#define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */ + +/******************* Bit definition for OPAMP_OTR register ******************/ +#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */ +#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */ +#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */ +#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */ +#define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */ + +/******************* Bit definition for OPAMP_LPOTR register ****************/ +#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */ +#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */ +#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */ +#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */ + +/******************************************************************************/ +/* */ +/* CRC calculation unit (CRC) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint32_t)0x000000FF) /*!< General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter (DAC) */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */ +#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA Interrupt enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */ +#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun interrupt enable */ +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!<DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!<DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!<DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!<DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!<DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!<DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!<DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!<DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint_t)0x00000FFF) /*!<DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* Debug MCU (DBGMCU) */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/****************** Bit definition for DBGMCU_APB1_FZ register **************/ + +#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Counter stopped when Core is halted */ +#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) /*!< SMBUS timeout mode stopped when Core is halted */ + +/****************** Bit definition for DBGMCU_APB2_FZ register **************/ + +#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00000004) /*!< TIM9 counter stopped when core is halted */ +#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00000008) /*!< TIM10 counter stopped when core is halted */ +#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00000010) /*!< TIM11 counter stopped when core is halted */ + +/******************************************************************************/ +/* */ +/* DMA Controller (DMA) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR register *******************/ +#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable*/ +#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */ +#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */ +#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */ +#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */ +#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */ + +#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller (EXTI) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ +#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */ +#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */ +#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */ +#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ +#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */ +#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */ +#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */ +#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ +#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */ +#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */ +#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */ +#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ +#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */ +#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */ +#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */ +#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ +#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */ +#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */ +#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */ +#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */ +#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */ +#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */ +#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */ +#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit 23 */ + +/******************************************************************************/ +/* */ +/* FLASH, DATA EEPROM and Option Bytes Registers */ +/* (FLASH, DATA_EEPROM, OB) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< Latency */ +#define FLASH_ACR_PRFTEN ((uint32_t)0x00000002) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_ACC64 ((uint32_t)0x00000004) /*!< Access 64 bits */ +#define FLASH_ACR_SLEEP_PD ((uint32_t)0x00000008) /*!< Flash mode during sleep mode */ +#define FLASH_ACR_RUN_PD ((uint32_t)0x00000010) /*!< Flash mode during RUN mode */ + +/******************* Bit definition for FLASH_PECR register ******************/ +#define FLASH_PECR_PELOCK ((uint32_t)0x00000001) /*!< FLASH_PECR and Flash data Lock */ +#define FLASH_PECR_PRGLOCK ((uint32_t)0x00000002) /*!< Program matrix Lock */ +#define FLASH_PECR_OPTLOCK ((uint32_t)0x00000004) /*!< Option byte matrix Lock */ +#define FLASH_PECR_PROG ((uint32_t)0x00000008) /*!< Program matrix selection */ +#define FLASH_PECR_DATA ((uint32_t)0x00000010) /*!< Data matrix selection */ +#define FLASH_PECR_FTDW ((uint32_t)0x00000100) /*!< Fixed Time Data write for Word/Half Word/Byte programming */ +#define FLASH_PECR_ERASE ((uint32_t)0x00000200) /*!< Page erasing mode */ +#define FLASH_PECR_FPRG ((uint32_t)0x00000400) /*!< Fast Page/Half Page programming mode */ +#define FLASH_PECR_PARALLBANK ((uint32_t)0x00008000) /*!< Parallel Bank mode */ +#define FLASH_PECR_EOPIE ((uint32_t)0x00010000) /*!< End of programming interrupt */ +#define FLASH_PECR_ERRIE ((uint32_t)0x00020000) /*!< Error interrupt */ +#define FLASH_PECR_OBL_LAUNCH ((uint32_t)0x00040000) /*!< Launch the option byte loading */ + +/****************** Bit definition for FLASH_PDKEYR register ******************/ +#define FLASH_PDKEYR_PDKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */ + +/****************** Bit definition for FLASH_PEKEYR register ******************/ +#define FLASH_PEKEYR_PEKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */ + +/****************** Bit definition for FLASH_PRGKEYR register ******************/ +#define FLASH_PRGKEYR_PRGKEYR ((uint32_t)0xFFFFFFFF) /*!< Program matrix Key */ + +/****************** Bit definition for FLASH_OPTKEYR register ******************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option bytes matrix Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */ +#define FLASH_SR_EOP ((uint32_t)0x00000002) /*!< End Of Programming*/ +#define FLASH_SR_ENDHV ((uint32_t)0x00000004) /*!< End of high voltage */ +#define FLASH_SR_READY ((uint32_t)0x00000008) /*!< Flash ready after low power mode */ + +#define FLASH_SR_WRPERR ((uint32_t)0x00000100) /*!< Write protected error */ +#define FLASH_SR_PGAERR ((uint32_t)0x00000200) /*!< Programming Alignment Error */ +#define FLASH_SR_SIZERR ((uint32_t)0x00000400) /*!< Size error */ +#define FLASH_SR_OPTVERR ((uint32_t)0x00000800) /*!< Option validity error */ +#define FLASH_SR_OPTVERRUSR ((uint32_t)0x00001000) /*!< Option User validity error */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_RDPRT ((uint32_t)0x000000FF) /*!< Read Protection */ +#define FLASH_OBR_BOR_LEV ((uint32_t)0x000F0000) /*!< BOR_LEV[3:0] Brown Out Reset Threshold Level*/ +#define FLASH_OBR_USER ((uint32_t)0x00F00000) /*!< User Option Bytes */ +#define FLASH_OBR_IWDG_SW ((uint32_t)0x00100000) /*!< IWDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint32_t)0x00200000) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00400000) /*!< nRST_STDBY */ +#define FLASH_OBR_nRST_BFB2 ((uint32_t)0x00800000) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR1_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ +#define FLASH_WRPR2_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ +#define FLASH_WRPR3_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ +#define FLASH_WRPR4_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/******************************************************************************/ +/* */ +/* General Purpose I/O */ +/* */ +/******************************************************************************/ +/****************** Bits definition for GPIO_MODER register *****************/ +#define GPIO_MODER_MODER0 ((uint32_t)0x00000003) +#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001) +#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002) + +#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C) +#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004) +#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008) + +#define GPIO_MODER_MODER2 ((uint32_t)0x00000030) +#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010) +#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020) + +#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0) +#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040) +#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080) + +#define GPIO_MODER_MODER4 ((uint32_t)0x00000300) +#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100) +#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200) + +#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00) +#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400) +#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800) + +#define GPIO_MODER_MODER6 ((uint32_t)0x00003000) +#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000) +#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000) + +#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000) +#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000) +#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000) + +#define GPIO_MODER_MODER8 ((uint32_t)0x00030000) +#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000) +#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000) + +#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000) +#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000) +#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000) + +#define GPIO_MODER_MODER10 ((uint32_t)0x00300000) +#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000) +#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000) + +#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000) +#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000) +#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000) + +#define GPIO_MODER_MODER12 ((uint32_t)0x03000000) +#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000) +#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000) + +#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000) +#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000) +#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000) + +#define GPIO_MODER_MODER14 ((uint32_t)0x30000000) +#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000) +#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000) + +#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000) +#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000) +#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000) + +/****************** Bits definition for GPIO_OTYPER register ****************/ +#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001) +#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002) +#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004) +#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008) +#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010) +#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020) +#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040) +#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080) +#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100) +#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200) +#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400) +#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800) +#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000) +#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000) +#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000) +#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000) + +/****************** Bits definition for GPIO_OSPEEDR register ***************/ +#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003) +#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001) +#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002) + +#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C) +#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004) +#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008) + +#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030) +#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010) +#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020) + +#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0) +#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040) +#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080) + +#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300) +#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100) +#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200) + +#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00) +#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400) +#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800) + +#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000) +#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000) +#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000) + +#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000) +#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000) +#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000) + +#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000) +#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000) +#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000) + +#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000) +#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000) +#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000) + +#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000) +#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000) +#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000) + +#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000) +#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000) +#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000) + +#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000) +#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000) +#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000) + +#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000) +#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000) +#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000) + +#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000) +#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000) +#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000) + +#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000) +#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000) +#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000) + +/****************** Bits definition for GPIO_PUPDR register *****************/ +#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003) +#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001) +#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002) + +#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C) +#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004) +#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008) + +#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030) +#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010) +#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020) + +#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0) +#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040) +#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080) + +#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300) +#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100) +#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200) + +#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00) +#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400) +#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800) + +#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000) +#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000) +#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000) + +#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000) +#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000) +#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000) + +#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000) +#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000) +#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000) + +#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000) +#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000) +#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000) + +#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000) +#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000) +#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000) + +#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000) +#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000) +#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000) + +#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000) +#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000) +#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000) + +#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000) +#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000) +#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000) + +#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000) +#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000) +#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000) +#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000) +#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000) +#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000) + +/****************** Bits definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001) +#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002) +#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004) +#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008) +#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010) +#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020) +#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040) +#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080) +#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100) +#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200) +#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400) +#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800) +#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000) +#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000) +#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000) +#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000) + +/****************** Bits definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001) +#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002) +#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004) +#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008) +#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010) +#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020) +#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040) +#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080) +#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100) +#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200) +#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400) +#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800) +#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000) +#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000) +#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000) +#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000) + +/****************** Bits definition for GPIO_BSRR register ******************/ +#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001) +#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002) +#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004) +#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008) +#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010) +#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020) +#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040) +#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080) +#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100) +#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200) +#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400) +#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800) +#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000) +#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000) +#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000) +#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000) +#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000) +#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000) +#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000) +#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000) +#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000) +#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000) +#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000) +#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000) +#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000) +#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000) +#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000) +#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000) +#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000) +#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000) +#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000) +#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000) + +/****************** Bit definition for GPIO_LCKR register ********************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) + +/****************** Bit definition for GPIO_AFRL register ********************/ +#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F) +#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0) +#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00) +#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000) +#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000) +#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000) +#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000) +#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000) + +/****************** Bit definition for GPIO_AFRH register ********************/ +#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F) +#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0) +#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00) +#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000) +#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000) +#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000) +#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000) +#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000) + +/****************** Bit definition for GPIO_BRR register *********************/ +#define GPIO_BRR_BR_0 ((uint32_t)0x00000001) +#define GPIO_BRR_BR_1 ((uint32_t)0x00000002) +#define GPIO_BRR_BR_2 ((uint32_t)0x00000004) +#define GPIO_BRR_BR_3 ((uint32_t)0x00000008) +#define GPIO_BRR_BR_4 ((uint32_t)0x00000010) +#define GPIO_BRR_BR_5 ((uint32_t)0x00000020) +#define GPIO_BRR_BR_6 ((uint32_t)0x00000040) +#define GPIO_BRR_BR_7 ((uint32_t)0x00000080) +#define GPIO_BRR_BR_8 ((uint32_t)0x00000100) +#define GPIO_BRR_BR_9 ((uint32_t)0x00000200) +#define GPIO_BRR_BR_10 ((uint32_t)0x00000400) +#define GPIO_BRR_BR_11 ((uint32_t)0x00000800) +#define GPIO_BRR_BR_12 ((uint32_t)0x00001000) +#define GPIO_BRR_BR_13 ((uint32_t)0x00002000) +#define GPIO_BRR_BR_14 ((uint32_t)0x00004000) +#define GPIO_BRR_BR_15 ((uint32_t)0x00008000) + + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface (I2C) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint32_t)0x00000100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint32_t)0x00000800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint32_t)0x000000FF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint32_t)0x00000001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint32_t)0x00000400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint32_t)0x00008000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG (IWDG) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint32_t)0x0000FFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint32_t)0x00000007) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint32_t)0x00000FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint32_t)0x00000001) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint32_t)0x00000002) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* LCD Controller (LCD) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for LCD_CR register *********************/ +#define LCD_CR_LCDEN ((uint32_t)0x00000001) /*!< LCD Enable Bit */ +#define LCD_CR_VSEL ((uint32_t)0x00000002) /*!< Voltage source selector Bit */ + +#define LCD_CR_DUTY ((uint32_t)0x0000001C) /*!< DUTY[2:0] bits (Duty selector) */ +#define LCD_CR_DUTY_0 ((uint32_t)0x00000004) /*!< Duty selector Bit 0 */ +#define LCD_CR_DUTY_1 ((uint32_t)0x00000008) /*!< Duty selector Bit 1 */ +#define LCD_CR_DUTY_2 ((uint32_t)0x00000010) /*!< Duty selector Bit 2 */ + +#define LCD_CR_BIAS ((uint32_t)0x00000060) /*!< BIAS[1:0] bits (Bias selector) */ +#define LCD_CR_BIAS_0 ((uint32_t)0x00000020) /*!< Bias selector Bit 0 */ +#define LCD_CR_BIAS_1 ((uint32_t)0x00000040) /*!< Bias selector Bit 1 */ + +#define LCD_CR_MUX_SEG ((uint32_t)0x00000080) /*!< Mux Segment Enable Bit */ + +/******************* Bit definition for LCD_FCR register ********************/ +#define LCD_FCR_HD ((uint32_t)0x00000001) /*!< High Drive Enable Bit */ +#define LCD_FCR_SOFIE ((uint32_t)0x00000002) /*!< Start of Frame Interrupt Enable Bit */ +#define LCD_FCR_UDDIE ((uint32_t)0x00000008) /*!< Update Display Done Interrupt Enable Bit */ + +#define LCD_FCR_PON ((uint32_t)0x00000070) /*!< PON[2:0] bits (Puls ON Duration) */ +#define LCD_FCR_PON_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define LCD_FCR_PON_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define LCD_FCR_PON_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define LCD_FCR_DEAD ((uint32_t)0x00000380) /*!< DEAD[2:0] bits (DEAD Time) */ +#define LCD_FCR_DEAD_0 ((uint32_t)0x00000080) /*!< Bit 0 */ +#define LCD_FCR_DEAD_1 ((uint32_t)0x00000100) /*!< Bit 1 */ +#define LCD_FCR_DEAD_2 ((uint32_t)0x00000200) /*!< Bit 2 */ + +#define LCD_FCR_CC ((uint32_t)0x00001C00) /*!< CC[2:0] bits (Contrast Control) */ +#define LCD_FCR_CC_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define LCD_FCR_CC_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define LCD_FCR_CC_2 ((uint32_t)0x00001000) /*!< Bit 2 */ + +#define LCD_FCR_BLINKF ((uint32_t)0x0000E000) /*!< BLINKF[2:0] bits (Blink Frequency) */ +#define LCD_FCR_BLINKF_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define LCD_FCR_BLINKF_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define LCD_FCR_BLINKF_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define LCD_FCR_BLINK ((uint32_t)0x00030000) /*!< BLINK[1:0] bits (Blink Enable) */ +#define LCD_FCR_BLINK_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define LCD_FCR_BLINK_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define LCD_FCR_DIV ((uint32_t)0x003C0000) /*!< DIV[3:0] bits (Divider) */ +#define LCD_FCR_PS ((uint32_t)0x03C00000) /*!< PS[3:0] bits (Prescaler) */ + +/******************* Bit definition for LCD_SR register *********************/ +#define LCD_SR_ENS ((uint32_t)0x00000001) /*!< LCD Enabled Bit */ +#define LCD_SR_SOF ((uint32_t)0x00000002) /*!< Start Of Frame Flag Bit */ +#define LCD_SR_UDR ((uint32_t)0x00000004) /*!< Update Display Request Bit */ +#define LCD_SR_UDD ((uint32_t)0x00000008) /*!< Update Display Done Flag Bit */ +#define LCD_SR_RDY ((uint32_t)0x00000010) /*!< Ready Flag Bit */ +#define LCD_SR_FCRSR ((uint32_t)0x00000020) /*!< LCD FCR Register Synchronization Flag Bit */ + +/******************* Bit definition for LCD_CLR register ********************/ +#define LCD_CLR_SOFC ((uint32_t)0x00000002) /*!< Start Of Frame Flag Clear Bit */ +#define LCD_CLR_UDDC ((uint32_t)0x00000008) /*!< Update Display Done Flag Clear Bit */ + +/******************* Bit definition for LCD_RAM register ********************/ +#define LCD_RAM_SEGMENT_DATA ((uint32_t)0xFFFFFFFF) /*!< Segment Data Bits */ + +/******************************************************************************/ +/* */ +/* Power Control (PWR) */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPSDSR ((uint32_t)0x00000001) /*!< Low-power deepsleep/sleep/low power run */ +#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */ +#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */ +#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */ +#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */ +#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */ +#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */ +#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */ +#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */ + +#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */ +#define PWR_CR_ULP ((uint32_t)0x00000200) /*!< Ultra Low Power mode */ +#define PWR_CR_FWU ((uint32_t)0x00000400) /*!< Fast wakeup */ + +#define PWR_CR_VOS ((uint32_t)0x00001800) /*!< VOS[1:0] bits (Voltage scaling range selection) */ +#define PWR_CR_VOS_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define PWR_CR_VOS_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define PWR_CR_LPRUN ((uint32_t)0x00004000) /*!< Low power run mode */ + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */ +#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */ +#define PWR_CSR_VOSF ((uint32_t)0x00000010) /*!< Voltage Scaling select flag */ +#define PWR_CSR_REGLPF ((uint32_t)0x00000020) /*!< Regulator LP flag */ + +#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */ +#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */ +#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control (RCC) */ +/* */ +/******************************************************************************/ +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ + +#define RCC_CR_MSION ((uint32_t)0x00000100) /*!< Internal Multi Speed clock enable */ +#define RCC_CR_MSIRDY ((uint32_t)0x00000200) /*!< Internal Multi Speed clock ready flag */ + +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ + +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ +#define RCC_CR_CSSON ((uint32_t)0x10000000) /*!< Clock Security System enable */ + +#define RCC_CR_RTCPRE ((uint32_t)0x60000000) /*!< RTC/LCD Prescaler */ +#define RCC_CR_RTCPRE_0 ((uint32_t)0x20000000) /*!< Bit0 */ +#define RCC_CR_RTCPRE_1 ((uint32_t)0x40000000) /*!< Bit1 */ + +/******************** Bit definition for RCC_ICSCR register *****************/ +#define RCC_ICSCR_HSICAL ((uint32_t)0x000000FF) /*!< Internal High Speed clock Calibration */ +#define RCC_ICSCR_HSITRIM ((uint32_t)0x00001F00) /*!< Internal High Speed clock trimming */ + +#define RCC_ICSCR_MSIRANGE ((uint32_t)0x0000E000) /*!< Internal Multi Speed clock Range */ +#define RCC_ICSCR_MSIRANGE_0 ((uint32_t)0x00000000) /*!< Internal Multi Speed clock Range 65.536 KHz */ +#define RCC_ICSCR_MSIRANGE_1 ((uint32_t)0x00002000) /*!< Internal Multi Speed clock Range 131.072 KHz */ +#define RCC_ICSCR_MSIRANGE_2 ((uint32_t)0x00004000) /*!< Internal Multi Speed clock Range 262.144 KHz */ +#define RCC_ICSCR_MSIRANGE_3 ((uint32_t)0x00006000) /*!< Internal Multi Speed clock Range 524.288 KHz */ +#define RCC_ICSCR_MSIRANGE_4 ((uint32_t)0x00008000) /*!< Internal Multi Speed clock Range 1.048 MHz */ +#define RCC_ICSCR_MSIRANGE_5 ((uint32_t)0x0000A000) /*!< Internal Multi Speed clock Range 2.097 MHz */ +#define RCC_ICSCR_MSIRANGE_6 ((uint32_t)0x0000C000) /*!< Internal Multi Speed clock Range 4.194 MHz */ +#define RCC_ICSCR_MSICAL ((uint32_t)0x00FF0000) /*!< Internal Multi Speed clock Calibration */ +#define RCC_ICSCR_MSITRIM ((uint32_t)0xFF000000) /*!< Internal Multi Speed clock trimming */ + +/******************** Bit definition for RCC_CFGR register ******************/ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +/*!< SW configuration */ +#define RCC_CFGR_SW_MSI ((uint32_t)0x00000000) /*!< MSI selected as system clock */ +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000001) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000002) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000003) /*!< PLL selected as system clock */ + +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS_MSI ((uint32_t)0x00000000) /*!< MSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000004) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000008) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x0000000C) /*!< PLL used as system clock */ + +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< PLL entry clock source*/ +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLSRC_HSI ((uint32_t)0x00000000) /*!< HSI as PLL entry clock source */ +#define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE as PLL entry clock source */ + + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00000000) /*!< PLL input clock * 3 */ +#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00040000) /*!< PLL input clock * 4 */ +#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00080000) /*!< PLL input clock * 6 */ +#define RCC_CFGR_PLLMUL8 ((uint32_t)0x000C0000) /*!< PLL input clock * 8 */ +#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00100000) /*!< PLL input clock * 12 */ +#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00140000) /*!< PLL input clock * 16 */ +#define RCC_CFGR_PLLMUL24 ((uint32_t)0x00180000) /*!< PLL input clock * 24 */ +#define RCC_CFGR_PLLMUL32 ((uint32_t)0x001C0000) /*!< PLL input clock * 32 */ +#define RCC_CFGR_PLLMUL48 ((uint32_t)0x00200000) /*!< PLL input clock * 48 */ + +/*!< PLLDIV configuration */ +#define RCC_CFGR_PLLDIV ((uint32_t)0x00C00000) /*!< PLLDIV[1:0] bits (PLL Output Division) */ +#define RCC_CFGR_PLLDIV_0 ((uint32_t)0x00400000) /*!< Bit0 */ +#define RCC_CFGR_PLLDIV_1 ((uint32_t)0x00800000) /*!< Bit1 */ + + +/*!< PLLDIV configuration */ +#define RCC_CFGR_PLLDIV1 ((uint32_t)0x00000000) /*!< PLL clock output = CKVCO / 1 */ +#define RCC_CFGR_PLLDIV2 ((uint32_t)0x00400000) /*!< PLL clock output = CKVCO / 2 */ +#define RCC_CFGR_PLLDIV3 ((uint32_t)0x00800000) /*!< PLL clock output = CKVCO / 3 */ +#define RCC_CFGR_PLLDIV4 ((uint32_t)0x00C00000) /*!< PLL clock output = CKVCO / 4 */ + + +#define RCC_CFGR_MCOSEL ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_CFGR_MCOSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define RCC_CFGR_MCOSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define RCC_CFGR_MCOSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +/*!< MCO configuration */ +#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x01000000) /*!< System clock selected */ +#define RCC_CFGR_MCO_HSI ((uint32_t)0x02000000) /*!< Internal 16 MHz RC oscillator clock selected */ +#define RCC_CFGR_MCO_MSI ((uint32_t)0x03000000) /*!< Internal Medium Speed RC oscillator clock selected */ +#define RCC_CFGR_MCO_HSE ((uint32_t)0x04000000) /*!< External 1-25 MHz oscillator clock selected */ +#define RCC_CFGR_MCO_PLL ((uint32_t)0x05000000) /*!< PLL clock divided */ +#define RCC_CFGR_MCO_LSI ((uint32_t)0x06000000) /*!< LSI selected */ +#define RCC_CFGR_MCO_LSE ((uint32_t)0x07000000) /*!< LSE selected */ + +#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCOPRE[2:0] bits (Microcontroller Clock Output Prescaler) */ +#define RCC_CFGR_MCOPRE_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define RCC_CFGR_MCOPRE_1 ((uint32_t)0x20000000) /*!< Bit 1 */ +#define RCC_CFGR_MCOPRE_2 ((uint32_t)0x40000000) /*!< Bit 2 */ + +/*!< MCO Prescaler configuration */ +#define RCC_CFGR_MCO_DIV1 ((uint32_t)0x00000000) /*!< MCO Clock divided by 1 */ +#define RCC_CFGR_MCO_DIV2 ((uint32_t)0x10000000) /*!< MCO Clock divided by 2 */ +#define RCC_CFGR_MCO_DIV4 ((uint32_t)0x20000000) /*!< MCO Clock divided by 4 */ +#define RCC_CFGR_MCO_DIV8 ((uint32_t)0x30000000) /*!< MCO Clock divided by 8 */ +#define RCC_CFGR_MCO_DIV16 ((uint32_t)0x40000000) /*!< MCO Clock divided by 16 */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_MSIRDYF ((uint32_t)0x00000020) /*!< MSI Ready Interrupt flag */ +#define RCC_CIR_LSECSS ((uint32_t)0x00000040) /*!< LSE CSS Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ + +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_MSIRDYIE ((uint32_t)0x00002000) /*!< MSI Ready Interrupt Enable */ +#define RCC_CIR_LSECSSIE ((uint32_t)0x00004000) /*!< LSE CSS Interrupt Enable */ + +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_MSIRDYC ((uint32_t)0x00200000) /*!< MSI Ready Interrupt Clear */ +#define RCC_CIR_LSECSSC ((uint32_t)0x00400000) /*!< LSE CSS Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +/***************** Bit definition for RCC_AHBRSTR register ******************/ +#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00000001) /*!< GPIO port A reset */ +#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00000002) /*!< GPIO port B reset */ +#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00000004) /*!< GPIO port C reset */ +#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00000008) /*!< GPIO port D reset */ +#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00000010) /*!< GPIO port E reset */ +#define RCC_AHBRSTR_GPIOHRST ((uint32_t)0x00000020) /*!< GPIO port H reset */ +#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00000040) /*!< GPIO port F reset */ +#define RCC_AHBRSTR_GPIOGRST ((uint32_t)0x00000080) /*!< GPIO port G reset */ +#define RCC_AHBRSTR_CRCRST ((uint32_t)0x00001000) /*!< CRC reset */ +#define RCC_AHBRSTR_FLITFRST ((uint32_t)0x00008000) /*!< FLITF reset */ +#define RCC_AHBRSTR_DMA1RST ((uint32_t)0x01000000) /*!< DMA1 reset */ +#define RCC_AHBRSTR_DMA2RST ((uint32_t)0x02000000) /*!< DMA2 reset */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< System Configuration SYSCFG reset */ +#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00000004) /*!< TIM9 reset */ +#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00000008) /*!< TIM10 reset */ +#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00000010) /*!< TIM11 reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC1 reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ +#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ +#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ +#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ +#define RCC_APB1RSTR_LCDRST ((uint32_t)0x00000200) /*!< LCD reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ +#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ +#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ +#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ +#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ +#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#define RCC_APB1RSTR_COMPRST ((uint32_t)0x80000000) /*!< Comparator interface reset */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00000001) /*!< GPIO port A clock enable */ +#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00000002) /*!< GPIO port B clock enable */ +#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00000004) /*!< GPIO port C clock enable */ +#define RCC_AHBENR_GPIODEN ((uint32_t)0x00000008) /*!< GPIO port D clock enable */ +#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00000010) /*!< GPIO port E clock enable */ +#define RCC_AHBENR_GPIOHEN ((uint32_t)0x00000020) /*!< GPIO port H clock enable */ +#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00000040) /*!< GPIO port F clock enable */ +#define RCC_AHBENR_GPIOGEN ((uint32_t)0x00000080) /*!< GPIO port G clock enable */ +#define RCC_AHBENR_CRCEN ((uint32_t)0x00001000) /*!< CRC clock enable */ +#define RCC_AHBENR_FLITFEN ((uint32_t)0x00008000) /*!< FLITF clock enable (has effect only when + the Flash memory is in power down mode) */ +#define RCC_AHBENR_DMA1EN ((uint32_t)0x01000000) /*!< DMA1 clock enable */ +#define RCC_AHBENR_DMA2EN ((uint32_t)0x02000000) /*!< DMA2 clock enable */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enable */ +#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00000004) /*!< TIM9 interface clock enable */ +#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00000008) /*!< TIM10 interface clock enable */ +#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC1 clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ +#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ +#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ +#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ +#define RCC_APB1ENR_LCDEN ((uint32_t)0x00000200) /*!< LCD clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ +#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ +#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ +#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ +#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ +#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#define RCC_APB1ENR_COMPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enable */ + +/****************** Bit definition for RCC_AHBLPENR register ****************/ +#define RCC_AHBLPENR_GPIOALPEN ((uint32_t)0x00000001) /*!< GPIO port A clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOBLPEN ((uint32_t)0x00000002) /*!< GPIO port B clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOCLPEN ((uint32_t)0x00000004) /*!< GPIO port C clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIODLPEN ((uint32_t)0x00000008) /*!< GPIO port D clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOELPEN ((uint32_t)0x00000010) /*!< GPIO port E clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOHLPEN ((uint32_t)0x00000020) /*!< GPIO port H clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOFLPEN ((uint32_t)0x00000040) /*!< GPIO port F clock enabled in sleep mode */ +#define RCC_AHBLPENR_GPIOGLPEN ((uint32_t)0x00000080) /*!< GPIO port G clock enabled in sleep mode */ +#define RCC_AHBLPENR_CRCLPEN ((uint32_t)0x00001000) /*!< CRC clock enabled in sleep mode */ +#define RCC_AHBLPENR_FLITFLPEN ((uint32_t)0x00008000) /*!< Flash Interface clock enabled in sleep mode + (has effect only when the Flash memory is + in power down mode) */ +#define RCC_AHBLPENR_SRAMLPEN ((uint32_t)0x00010000) /*!< SRAM clock enabled in sleep mode */ +#define RCC_AHBLPENR_DMA1LPEN ((uint32_t)0x01000000) /*!< DMA1 clock enabled in sleep mode */ +#define RCC_AHBLPENR_DMA2LPEN ((uint32_t)0x02000000) /*!< DMA2 clock enabled in sleep mode */ + +/****************** Bit definition for RCC_APB2LPENR register ***************/ +#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enabled in sleep mode */ +#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00000004) /*!< TIM9 interface clock enabled in sleep mode */ +#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00000008) /*!< TIM10 interface clock enabled in sleep mode */ +#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enabled in sleep mode */ +#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000200) /*!< ADC1 clock enabled in sleep mode */ +#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000) /*!< SPI1 clock enabled in sleep mode */ +#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00004000) /*!< USART1 clock enabled in sleep mode */ + +/***************** Bit definition for RCC_APB1LPENR register ****************/ +#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled in sleep mode */ +#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002) /*!< Timer 3 clock enabled in sleep mode */ +#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004) /*!< Timer 4 clock enabled in sleep mode */ +#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008) /*!< Timer 5 clock enabled in sleep mode */ +#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010) /*!< Timer 6 clock enabled in sleep mode */ +#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020) /*!< Timer 7 clock enabled in sleep mode */ +#define RCC_APB1LPENR_LCDLPEN ((uint32_t)0x00000200) /*!< LCD clock enabled in sleep mode */ +#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enabled in sleep mode */ +#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000) /*!< SPI 2 clock enabled in sleep mode */ +#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000) /*!< SPI 3 clock enabled in sleep mode */ +#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000) /*!< USART 2 clock enabled in sleep mode */ +#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000) /*!< USART 3 clock enabled in sleep mode */ +#define RCC_APB1LPENR_UART4LPEN ((uint32_t)0x00080000) /*!< UART 4 clock enabled in sleep mode */ +#define RCC_APB1LPENR_UART5LPEN ((uint32_t)0x00100000) /*!< UART 5 clock enabled in sleep mode */ +#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000) /*!< I2C 1 clock enabled in sleep mode */ +#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000) /*!< I2C 2 clock enabled in sleep mode */ +#define RCC_APB1LPENR_USBLPEN ((uint32_t)0x00800000) /*!< USB clock enabled in sleep mode */ +#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000) /*!< Power interface clock enabled in sleep mode */ +#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000) /*!< DAC interface clock enabled in sleep mode */ +#define RCC_APB1LPENR_COMPLPEN ((uint32_t)0x80000000) /*!< Comparator interface clock enabled in sleep mode*/ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ + +#define RCC_CSR_LSEON ((uint32_t)0x00000100) /*!< External Low Speed oscillator enable */ +#define RCC_CSR_LSERDY ((uint32_t)0x00000200) /*!< External Low Speed oscillator Ready */ +#define RCC_CSR_LSEBYP ((uint32_t)0x00000400) /*!< External Low Speed oscillator Bypass */ + +#define RCC_CSR_LSECSSON ((uint32_t)0x00000800) /*!< External Low Speed oscillator CSS Enable */ +#define RCC_CSR_LSECSSD ((uint32_t)0x00001000) /*!< External Low Speed oscillator CSS Detected */ + +#define RCC_CSR_RTCSEL ((uint32_t)0x00030000) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_CSR_RTCSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define RCC_CSR_RTCSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_CSR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_CSR_RTCSEL_LSE ((uint32_t)0x00010000) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_CSR_RTCSEL_LSI ((uint32_t)0x00020000) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_CSR_RTCSEL_HSE ((uint32_t)0x00030000) /*!< HSE oscillator clock divided by 2, 4, 8 or 16 by RTCPRE used as RTC clock */ + +#define RCC_CSR_RTCEN ((uint32_t)0x00400000) /*!< RTC clock enable */ +#define RCC_CSR_RTCRST ((uint32_t)0x00800000) /*!< RTC reset */ + +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< Option Bytes Loader reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock (RTC) */ +/* */ +/******************************************************************************/ +/******************** Bits definition for RTC_TR register *******************/ +#define RTC_TR_PM ((uint32_t)0x00400000) +#define RTC_TR_HT ((uint32_t)0x00300000) +#define RTC_TR_HT_0 ((uint32_t)0x00100000) +#define RTC_TR_HT_1 ((uint32_t)0x00200000) +#define RTC_TR_HU ((uint32_t)0x000F0000) +#define RTC_TR_HU_0 ((uint32_t)0x00010000) +#define RTC_TR_HU_1 ((uint32_t)0x00020000) +#define RTC_TR_HU_2 ((uint32_t)0x00040000) +#define RTC_TR_HU_3 ((uint32_t)0x00080000) +#define RTC_TR_MNT ((uint32_t)0x00007000) +#define RTC_TR_MNT_0 ((uint32_t)0x00001000) +#define RTC_TR_MNT_1 ((uint32_t)0x00002000) +#define RTC_TR_MNT_2 ((uint32_t)0x00004000) +#define RTC_TR_MNU ((uint32_t)0x00000F00) +#define RTC_TR_MNU_0 ((uint32_t)0x00000100) +#define RTC_TR_MNU_1 ((uint32_t)0x00000200) +#define RTC_TR_MNU_2 ((uint32_t)0x00000400) +#define RTC_TR_MNU_3 ((uint32_t)0x00000800) +#define RTC_TR_ST ((uint32_t)0x00000070) +#define RTC_TR_ST_0 ((uint32_t)0x00000010) +#define RTC_TR_ST_1 ((uint32_t)0x00000020) +#define RTC_TR_ST_2 ((uint32_t)0x00000040) +#define RTC_TR_SU ((uint32_t)0x0000000F) +#define RTC_TR_SU_0 ((uint32_t)0x00000001) +#define RTC_TR_SU_1 ((uint32_t)0x00000002) +#define RTC_TR_SU_2 ((uint32_t)0x00000004) +#define RTC_TR_SU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_DR register *******************/ +#define RTC_DR_YT ((uint32_t)0x00F00000) +#define RTC_DR_YT_0 ((uint32_t)0x00100000) +#define RTC_DR_YT_1 ((uint32_t)0x00200000) +#define RTC_DR_YT_2 ((uint32_t)0x00400000) +#define RTC_DR_YT_3 ((uint32_t)0x00800000) +#define RTC_DR_YU ((uint32_t)0x000F0000) +#define RTC_DR_YU_0 ((uint32_t)0x00010000) +#define RTC_DR_YU_1 ((uint32_t)0x00020000) +#define RTC_DR_YU_2 ((uint32_t)0x00040000) +#define RTC_DR_YU_3 ((uint32_t)0x00080000) +#define RTC_DR_WDU ((uint32_t)0x0000E000) +#define RTC_DR_WDU_0 ((uint32_t)0x00002000) +#define RTC_DR_WDU_1 ((uint32_t)0x00004000) +#define RTC_DR_WDU_2 ((uint32_t)0x00008000) +#define RTC_DR_MT ((uint32_t)0x00001000) +#define RTC_DR_MU ((uint32_t)0x00000F00) +#define RTC_DR_MU_0 ((uint32_t)0x00000100) +#define RTC_DR_MU_1 ((uint32_t)0x00000200) +#define RTC_DR_MU_2 ((uint32_t)0x00000400) +#define RTC_DR_MU_3 ((uint32_t)0x00000800) +#define RTC_DR_DT ((uint32_t)0x00000030) +#define RTC_DR_DT_0 ((uint32_t)0x00000010) +#define RTC_DR_DT_1 ((uint32_t)0x00000020) +#define RTC_DR_DU ((uint32_t)0x0000000F) +#define RTC_DR_DU_0 ((uint32_t)0x00000001) +#define RTC_DR_DU_1 ((uint32_t)0x00000002) +#define RTC_DR_DU_2 ((uint32_t)0x00000004) +#define RTC_DR_DU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_CR register *******************/ +#define RTC_CR_COE ((uint32_t)0x00800000) +#define RTC_CR_OSEL ((uint32_t)0x00600000) +#define RTC_CR_OSEL_0 ((uint32_t)0x00200000) +#define RTC_CR_OSEL_1 ((uint32_t)0x00400000) +#define RTC_CR_POL ((uint32_t)0x00100000) +#define RTC_CR_COSEL ((uint32_t)0x00080000) +#define RTC_CR_BCK ((uint32_t)0x00040000) +#define RTC_CR_SUB1H ((uint32_t)0x00020000) +#define RTC_CR_ADD1H ((uint32_t)0x00010000) +#define RTC_CR_TSIE ((uint32_t)0x00008000) +#define RTC_CR_WUTIE ((uint32_t)0x00004000) +#define RTC_CR_ALRBIE ((uint32_t)0x00002000) +#define RTC_CR_ALRAIE ((uint32_t)0x00001000) +#define RTC_CR_TSE ((uint32_t)0x00000800) +#define RTC_CR_WUTE ((uint32_t)0x00000400) +#define RTC_CR_ALRBE ((uint32_t)0x00000200) +#define RTC_CR_ALRAE ((uint32_t)0x00000100) +#define RTC_CR_DCE ((uint32_t)0x00000080) +#define RTC_CR_FMT ((uint32_t)0x00000040) +#define RTC_CR_BYPSHAD ((uint32_t)0x00000020) +#define RTC_CR_REFCKON ((uint32_t)0x00000010) +#define RTC_CR_TSEDGE ((uint32_t)0x00000008) +#define RTC_CR_WUCKSEL ((uint32_t)0x00000007) +#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001) +#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002) +#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004) + +/******************** Bits definition for RTC_ISR register ******************/ +#define RTC_ISR_RECALPF ((uint32_t)0x00010000) +#define RTC_ISR_TAMP3F ((uint32_t)0x00008000) +#define RTC_ISR_TAMP2F ((uint32_t)0x00004000) +#define RTC_ISR_TAMP1F ((uint32_t)0x00002000) +#define RTC_ISR_TSOVF ((uint32_t)0x00001000) +#define RTC_ISR_TSF ((uint32_t)0x00000800) +#define RTC_ISR_WUTF ((uint32_t)0x00000400) +#define RTC_ISR_ALRBF ((uint32_t)0x00000200) +#define RTC_ISR_ALRAF ((uint32_t)0x00000100) +#define RTC_ISR_INIT ((uint32_t)0x00000080) +#define RTC_ISR_INITF ((uint32_t)0x00000040) +#define RTC_ISR_RSF ((uint32_t)0x00000020) +#define RTC_ISR_INITS ((uint32_t)0x00000010) +#define RTC_ISR_SHPF ((uint32_t)0x00000008) +#define RTC_ISR_WUTWF ((uint32_t)0x00000004) +#define RTC_ISR_ALRBWF ((uint32_t)0x00000002) +#define RTC_ISR_ALRAWF ((uint32_t)0x00000001) + +/******************** Bits definition for RTC_PRER register *****************/ +#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000) +#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF) + +/******************** Bits definition for RTC_WUTR register *****************/ +#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF) + +/******************** Bits definition for RTC_CALIBR register ***************/ +#define RTC_CALIBR_DCS ((uint32_t)0x00000080) +#define RTC_CALIBR_DC ((uint32_t)0x0000001F) + +/******************** Bits definition for RTC_ALRMAR register ***************/ +#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000) +#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000) +#define RTC_ALRMAR_DT ((uint32_t)0x30000000) +#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000) +#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000) +#define RTC_ALRMAR_DU ((uint32_t)0x0F000000) +#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000) +#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000) +#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000) +#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000) +#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000) +#define RTC_ALRMAR_PM ((uint32_t)0x00400000) +#define RTC_ALRMAR_HT ((uint32_t)0x00300000) +#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000) +#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000) +#define RTC_ALRMAR_HU ((uint32_t)0x000F0000) +#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000) +#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000) +#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000) +#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000) +#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000) +#define RTC_ALRMAR_MNT ((uint32_t)0x00007000) +#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000) +#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000) +#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000) +#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00) +#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100) +#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200) +#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400) +#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800) +#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080) +#define RTC_ALRMAR_ST ((uint32_t)0x00000070) +#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010) +#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020) +#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040) +#define RTC_ALRMAR_SU ((uint32_t)0x0000000F) +#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001) +#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002) +#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004) +#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_ALRMBR register ***************/ +#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000) +#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000) +#define RTC_ALRMBR_DT ((uint32_t)0x30000000) +#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000) +#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000) +#define RTC_ALRMBR_DU ((uint32_t)0x0F000000) +#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000) +#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000) +#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000) +#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000) +#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000) +#define RTC_ALRMBR_PM ((uint32_t)0x00400000) +#define RTC_ALRMBR_HT ((uint32_t)0x00300000) +#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000) +#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000) +#define RTC_ALRMBR_HU ((uint32_t)0x000F0000) +#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000) +#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000) +#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000) +#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000) +#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000) +#define RTC_ALRMBR_MNT ((uint32_t)0x00007000) +#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000) +#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000) +#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000) +#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00) +#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100) +#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200) +#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400) +#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800) +#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080) +#define RTC_ALRMBR_ST ((uint32_t)0x00000070) +#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010) +#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020) +#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040) +#define RTC_ALRMBR_SU ((uint32_t)0x0000000F) +#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001) +#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002) +#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004) +#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_WPR register ******************/ +#define RTC_WPR_KEY ((uint32_t)0x000000FF) + +/******************** Bits definition for RTC_SSR register ******************/ +#define RTC_SSR_SS ((uint32_t)0x0000FFFF) + +/******************** Bits definition for RTC_SHIFTR register ***************/ +#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF) +#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000) + +/******************** Bits definition for RTC_TSTR register *****************/ +#define RTC_TSTR_PM ((uint32_t)0x00400000) +#define RTC_TSTR_HT ((uint32_t)0x00300000) +#define RTC_TSTR_HT_0 ((uint32_t)0x00100000) +#define RTC_TSTR_HT_1 ((uint32_t)0x00200000) +#define RTC_TSTR_HU ((uint32_t)0x000F0000) +#define RTC_TSTR_HU_0 ((uint32_t)0x00010000) +#define RTC_TSTR_HU_1 ((uint32_t)0x00020000) +#define RTC_TSTR_HU_2 ((uint32_t)0x00040000) +#define RTC_TSTR_HU_3 ((uint32_t)0x00080000) +#define RTC_TSTR_MNT ((uint32_t)0x00007000) +#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000) +#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000) +#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000) +#define RTC_TSTR_MNU ((uint32_t)0x00000F00) +#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100) +#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200) +#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400) +#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800) +#define RTC_TSTR_ST ((uint32_t)0x00000070) +#define RTC_TSTR_ST_0 ((uint32_t)0x00000010) +#define RTC_TSTR_ST_1 ((uint32_t)0x00000020) +#define RTC_TSTR_ST_2 ((uint32_t)0x00000040) +#define RTC_TSTR_SU ((uint32_t)0x0000000F) +#define RTC_TSTR_SU_0 ((uint32_t)0x00000001) +#define RTC_TSTR_SU_1 ((uint32_t)0x00000002) +#define RTC_TSTR_SU_2 ((uint32_t)0x00000004) +#define RTC_TSTR_SU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_TSDR register *****************/ +#define RTC_TSDR_WDU ((uint32_t)0x0000E000) +#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000) +#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000) +#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000) +#define RTC_TSDR_MT ((uint32_t)0x00001000) +#define RTC_TSDR_MU ((uint32_t)0x00000F00) +#define RTC_TSDR_MU_0 ((uint32_t)0x00000100) +#define RTC_TSDR_MU_1 ((uint32_t)0x00000200) +#define RTC_TSDR_MU_2 ((uint32_t)0x00000400) +#define RTC_TSDR_MU_3 ((uint32_t)0x00000800) +#define RTC_TSDR_DT ((uint32_t)0x00000030) +#define RTC_TSDR_DT_0 ((uint32_t)0x00000010) +#define RTC_TSDR_DT_1 ((uint32_t)0x00000020) +#define RTC_TSDR_DU ((uint32_t)0x0000000F) +#define RTC_TSDR_DU_0 ((uint32_t)0x00000001) +#define RTC_TSDR_DU_1 ((uint32_t)0x00000002) +#define RTC_TSDR_DU_2 ((uint32_t)0x00000004) +#define RTC_TSDR_DU_3 ((uint32_t)0x00000008) + +/******************** Bits definition for RTC_TSSSR register ****************/ +#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF) + +/******************** Bits definition for RTC_CAL register *****************/ +#define RTC_CALR_CALP ((uint32_t)0x00008000) +#define RTC_CALR_CALW8 ((uint32_t)0x00004000) +#define RTC_CALR_CALW16 ((uint32_t)0x00002000) +#define RTC_CALR_CALM ((uint32_t)0x000001FF) +#define RTC_CALR_CALM_0 ((uint32_t)0x00000001) +#define RTC_CALR_CALM_1 ((uint32_t)0x00000002) +#define RTC_CALR_CALM_2 ((uint32_t)0x00000004) +#define RTC_CALR_CALM_3 ((uint32_t)0x00000008) +#define RTC_CALR_CALM_4 ((uint32_t)0x00000010) +#define RTC_CALR_CALM_5 ((uint32_t)0x00000020) +#define RTC_CALR_CALM_6 ((uint32_t)0x00000040) +#define RTC_CALR_CALM_7 ((uint32_t)0x00000080) +#define RTC_CALR_CALM_8 ((uint32_t)0x00000100) + +/******************** Bits definition for RTC_TAFCR register ****************/ +#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000) +#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000) +#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000) +#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000) +#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000) +#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800) +#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800) +#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000) +#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700) +#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100) +#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200) +#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400) +#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080) +#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040) +#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020) +#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010) +#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008) +#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004) +#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002) +#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001) + +/******************** Bits definition for RTC_ALRMASSR register *************/ +#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000) +#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000) +#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000) +#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000) +#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000) +#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF) + +/******************** Bits definition for RTC_ALRMBSSR register *************/ +#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000) +#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000) +#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000) +#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000) +#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000) +#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF) + +/******************** Bits definition for RTC_BKP0R register ****************/ +#define RTC_BKP0R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP1R register ****************/ +#define RTC_BKP1R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP2R register ****************/ +#define RTC_BKP2R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP3R register ****************/ +#define RTC_BKP3R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP4R register ****************/ +#define RTC_BKP4R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP5R register ****************/ +#define RTC_BKP5R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP6R register ****************/ +#define RTC_BKP6R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP7R register ****************/ +#define RTC_BKP7R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP8R register ****************/ +#define RTC_BKP8R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP9R register ****************/ +#define RTC_BKP9R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP10R register ***************/ +#define RTC_BKP10R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP11R register ***************/ +#define RTC_BKP11R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP12R register ***************/ +#define RTC_BKP12R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP13R register ***************/ +#define RTC_BKP13R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP14R register ***************/ +#define RTC_BKP14R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP15R register ***************/ +#define RTC_BKP15R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP16R register ***************/ +#define RTC_BKP16R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP17R register ***************/ +#define RTC_BKP17R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP18R register ***************/ +#define RTC_BKP18R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP19R register ***************/ +#define RTC_BKP19R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP20R register ***************/ +#define RTC_BKP20R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP21R register ***************/ +#define RTC_BKP21R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP22R register ***************/ +#define RTC_BKP22R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP23R register ***************/ +#define RTC_BKP23R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP24R register ***************/ +#define RTC_BKP24R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP25R register ***************/ +#define RTC_BKP25R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP26R register ***************/ +#define RTC_BKP26R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP27R register ***************/ +#define RTC_BKP27R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP28R register ***************/ +#define RTC_BKP28R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP29R register ***************/ +#define RTC_BKP29R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP30R register ***************/ +#define RTC_BKP30R ((uint32_t)0xFFFFFFFF) + +/******************** Bits definition for RTC_BKP31R register ***************/ +#define RTC_BKP31R ((uint32_t)0xFFFFFFFF) + +/******************** Number of backup registers ******************************/ +#define RTC_BKP_NUMBER 32 + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface (SPI) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */ +#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame format */ +#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */ +#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */ +#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */ +#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* System Configuration (SYSCFG) */ +/* */ +/******************************************************************************/ +/***************** Bit definition for SYSCFG_MEMRMP register ****************/ +#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */ +#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define SYSCFG_MEMRMP_BOOT_MODE ((uint32_t)0x00000300) /*!< Boot mode Config */ +#define SYSCFG_MEMRMP_BOOT_MODE_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SYSCFG_MEMRMP_BOOT_MODE_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/***************** Bit definition for SYSCFG_PMC register *******************/ +#define SYSCFG_PMC_USB_PU ((uint32_t)0x00000001) /*!< SYSCFG PMC */ + +/***************** Bit definition for SYSCFG_EXTICR1 register ***************/ +#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x0000000F) /*!< EXTI 0 configuration */ +#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x000000F0) /*!< EXTI 1 configuration */ +#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x00000F00) /*!< EXTI 2 configuration */ +#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0x0000F000) /*!< EXTI 3 configuration */ + +/** + * @brief EXTI0 configuration + */ +#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x00000001) /*!< PB[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x00000002) /*!< PC[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x00000003) /*!< PD[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x00000004) /*!< PE[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x00000005) /*!< PH[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PF ((uint32_t)0x00000006) /*!< PF[0] pin */ +#define SYSCFG_EXTICR1_EXTI0_PG ((uint32_t)0x00000007) /*!< PG[0] pin */ + +/** + * @brief EXTI1 configuration + */ +#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x00000010) /*!< PB[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x00000020) /*!< PC[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x00000030) /*!< PD[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x00000040) /*!< PE[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x00000050) /*!< PH[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PF ((uint32_t)0x00000060) /*!< PF[1] pin */ +#define SYSCFG_EXTICR1_EXTI1_PG ((uint32_t)0x00000070) /*!< PG[1] pin */ + +/** + * @brief EXTI2 configuration + */ +#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x00000100) /*!< PB[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x00000200) /*!< PC[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x00000300) /*!< PD[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x00000400) /*!< PE[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x00000500) /*!< PH[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PF ((uint32_t)0x00000600) /*!< PF[2] pin */ +#define SYSCFG_EXTICR1_EXTI2_PG ((uint32_t)0x00000700) /*!< PG[2] pin */ + +/** + * @brief EXTI3 configuration + */ +#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x00001000) /*!< PB[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x00002000) /*!< PC[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x00003000) /*!< PD[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x00004000) /*!< PE[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PF ((uint32_t)0x00003000) /*!< PF[3] pin */ +#define SYSCFG_EXTICR1_EXTI3_PG ((uint32_t)0x00004000) /*!< PG[3] pin */ + +/***************** Bit definition for SYSCFG_EXTICR2 register *****************/ +#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x0000000F) /*!< EXTI 4 configuration */ +#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x000000F0) /*!< EXTI 5 configuration */ +#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x00000F00) /*!< EXTI 6 configuration */ +#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0x0000F000) /*!< EXTI 7 configuration */ + +/** + * @brief EXTI4 configuration + */ +#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x00000001) /*!< PB[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x00000002) /*!< PC[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x00000003) /*!< PD[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x00000004) /*!< PE[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PF ((uint32_t)0x00000006) /*!< PF[4] pin */ +#define SYSCFG_EXTICR2_EXTI4_PG ((uint32_t)0x00000007) /*!< PG[4] pin */ + +/** + * @brief EXTI5 configuration + */ +#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x00000010) /*!< PB[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x00000020) /*!< PC[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x00000030) /*!< PD[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x00000040) /*!< PE[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PF ((uint32_t)0x00000060) /*!< PF[5] pin */ +#define SYSCFG_EXTICR2_EXTI5_PG ((uint32_t)0x00000070) /*!< PG[5] pin */ + +/** + * @brief EXTI6 configuration + */ +#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x00000100) /*!< PB[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x00000200) /*!< PC[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x00000300) /*!< PD[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x00000400) /*!< PE[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PF ((uint32_t)0x00000600) /*!< PF[6] pin */ +#define SYSCFG_EXTICR2_EXTI6_PG ((uint32_t)0x00000700) /*!< PG[6] pin */ + +/** + * @brief EXTI7 configuration + */ +#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x00001000) /*!< PB[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x00002000) /*!< PC[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x00003000) /*!< PD[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x00004000) /*!< PE[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PF ((uint32_t)0x00006000) /*!< PF[7] pin */ +#define SYSCFG_EXTICR2_EXTI7_PG ((uint32_t)0x00007000) /*!< PG[7] pin */ + +/***************** Bit definition for SYSCFG_EXTICR3 register *****************/ +#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x0000000F) /*!< EXTI 8 configuration */ +#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x000000F0) /*!< EXTI 9 configuration */ +#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x00000F00) /*!< EXTI 10 configuration */ +#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0x0000F000) /*!< EXTI 11 configuration */ + +/** + * @brief EXTI8 configuration + */ +#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x00000001) /*!< PB[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x00000002) /*!< PC[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x00000003) /*!< PD[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x00000004) /*!< PE[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PF ((uint32_t)0x00000006) /*!< PF[8] pin */ +#define SYSCFG_EXTICR3_EXTI8_PG ((uint32_t)0x00000007) /*!< PG[8] pin */ + +/** + * @brief EXTI9 configuration + */ +#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x00000010) /*!< PB[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x00000020) /*!< PC[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x00000030) /*!< PD[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x00000040) /*!< PE[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PF ((uint32_t)0x00000060) /*!< PF[9] pin */ +#define SYSCFG_EXTICR3_EXTI9_PG ((uint32_t)0x00000070) /*!< PG[9] pin */ + +/** + * @brief EXTI10 configuration + */ +#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x00000100) /*!< PB[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x00000200) /*!< PC[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x00000300) /*!< PD[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x00000400) /*!< PE[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PF ((uint32_t)0x00000600) /*!< PF[10] pin */ +#define SYSCFG_EXTICR3_EXTI10_PG ((uint32_t)0x00000700) /*!< PG[10] pin */ + +/** + * @brief EXTI11 configuration + */ +#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x00001000) /*!< PB[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x00002000) /*!< PC[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x00003000) /*!< PD[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x00004000) /*!< PE[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PF ((uint32_t)0x00006000) /*!< PF[11] pin */ +#define SYSCFG_EXTICR3_EXTI11_PG ((uint32_t)0x00007000) /*!< PG[11] pin */ + +/***************** Bit definition for SYSCFG_EXTICR4 register *****************/ +#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x0000000F) /*!< EXTI 12 configuration */ +#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x000000F0) /*!< EXTI 13 configuration */ +#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x00000F00) /*!< EXTI 14 configuration */ +#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0x0000F000) /*!< EXTI 15 configuration */ + +/** + * @brief EXTI12 configuration + */ +#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x00000001) /*!< PB[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x00000002) /*!< PC[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x00000003) /*!< PD[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x00000004) /*!< PE[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PF ((uint32_t)0x00000006) /*!< PF[12] pin */ +#define SYSCFG_EXTICR4_EXTI12_PG ((uint32_t)0x00000007) /*!< PG[12] pin */ + +/** + * @brief EXTI13 configuration + */ +#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x00000010) /*!< PB[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x00000020) /*!< PC[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x00000030) /*!< PD[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x00000040) /*!< PE[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PF ((uint32_t)0x00000060) /*!< PF[13] pin */ +#define SYSCFG_EXTICR4_EXTI13_PG ((uint32_t)0x00000070) /*!< PG[13] pin */ + +/** + * @brief EXTI14 configuration + */ +#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x00000100) /*!< PB[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x00000200) /*!< PC[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x00000300) /*!< PD[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x00000400) /*!< PE[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PF ((uint32_t)0x00000600) /*!< PF[14] pin */ +#define SYSCFG_EXTICR4_EXTI14_PG ((uint32_t)0x00000700) /*!< PG[14] pin */ + +/** + * @brief EXTI15 configuration + */ +#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x00001000) /*!< PB[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x00002000) /*!< PC[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x00003000) /*!< PD[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x00004000) /*!< PE[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PF ((uint32_t)0x00006000) /*!< PF[15] pin */ +#define SYSCFG_EXTICR4_EXTI15_PG ((uint32_t)0x00007000) /*!< PG[15] pin */ + +/******************************************************************************/ +/* */ +/* Routing Interface (RI) */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RI_ICR register ********************/ +#define RI_ICR_IC1OS ((uint32_t)0x0000000F) /*!< IC1OS[3:0] bits (Input Capture 1 select bits) */ +#define RI_ICR_IC1OS_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ICR_IC1OS_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ICR_IC1OS_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ICR_IC1OS_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define RI_ICR_IC2OS ((uint32_t)0x000000F0) /*!< IC2OS[3:0] bits (Input Capture 2 select bits) */ +#define RI_ICR_IC2OS_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RI_ICR_IC2OS_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RI_ICR_IC2OS_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RI_ICR_IC2OS_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RI_ICR_IC3OS ((uint32_t)0x00000F00) /*!< IC3OS[3:0] bits (Input Capture 3 select bits) */ +#define RI_ICR_IC3OS_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RI_ICR_IC3OS_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RI_ICR_IC3OS_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define RI_ICR_IC3OS_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define RI_ICR_IC4OS ((uint32_t)0x0000F000) /*!< IC4OS[3:0] bits (Input Capture 4 select bits) */ +#define RI_ICR_IC4OS_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define RI_ICR_IC4OS_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define RI_ICR_IC4OS_2 ((uint32_t)0x00004000) /*!< Bit 2 */ +#define RI_ICR_IC4OS_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + +#define RI_ICR_TIM ((uint32_t)0x00030000) /*!< TIM[3:0] bits (Timers select bits) */ +#define RI_ICR_TIM_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define RI_ICR_TIM_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define RI_ICR_IC1 ((uint32_t)0x00040000) /*!< Input capture 1 */ +#define RI_ICR_IC2 ((uint32_t)0x00080000) /*!< Input capture 2 */ +#define RI_ICR_IC3 ((uint32_t)0x00100000) /*!< Input capture 3 */ +#define RI_ICR_IC4 ((uint32_t)0x00200000) /*!< Input capture 4 */ + +/******************** Bit definition for RI_ASCR1 register ********************/ +#define RI_ASCR1_CH ((uint32_t)0x7BFDFFFF) /*!< AS_CH[25:18] & AS_CH[15:0] bits ( Analog switches selection bits) */ +#define RI_ASCR1_CH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASCR1_CH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASCR1_CH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASCR1_CH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASCR1_CH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASCR1_CH_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASCR1_CH_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASCR1_CH_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASCR1_CH_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASCR1_CH_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASCR1_CH_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASCR1_CH_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASCR1_CH_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASCR1_CH_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASCR1_CH_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASCR1_CH_15 ((uint32_t)0x00008000) /*!< Bit 15 */ +#define RI_ASCR1_CH_31 ((uint32_t)0x00010000) /*!< Bit 16 */ +#define RI_ASCR1_CH_18 ((uint32_t)0x00040000) /*!< Bit 18 */ +#define RI_ASCR1_CH_19 ((uint32_t)0x00080000) /*!< Bit 19 */ +#define RI_ASCR1_CH_20 ((uint32_t)0x00100000) /*!< Bit 20 */ +#define RI_ASCR1_CH_21 ((uint32_t)0x00200000) /*!< Bit 21 */ +#define RI_ASCR1_CH_22 ((uint32_t)0x00400000) /*!< Bit 22 */ +#define RI_ASCR1_CH_23 ((uint32_t)0x00800000) /*!< Bit 23 */ +#define RI_ASCR1_CH_24 ((uint32_t)0x01000000) /*!< Bit 24 */ +#define RI_ASCR1_CH_25 ((uint32_t)0x02000000) /*!< Bit 25 */ +#define RI_ASCR1_VCOMP ((uint32_t)0x04000000) /*!< ADC analog switch selection for internal node to COMP1 */ +#define RI_ASCR1_CH_27 ((uint32_t)0x00400000) /*!< Bit 27 */ +#define RI_ASCR1_CH_28 ((uint32_t)0x00800000) /*!< Bit 28 */ +#define RI_ASCR1_CH_29 ((uint32_t)0x01000000) /*!< Bit 29 */ +#define RI_ASCR1_CH_30 ((uint32_t)0x02000000) /*!< Bit 30 */ +#define RI_ASCR1_SCM ((uint32_t)0x80000000) /*!< I/O Switch control mode */ + +/******************** Bit definition for RI_ASCR2 register ********************/ +#define RI_ASCR2_GR10_1 ((uint32_t)0x00000001) /*!< GR10-1 selection bit */ +#define RI_ASCR2_GR10_2 ((uint32_t)0x00000002) /*!< GR10-2 selection bit */ +#define RI_ASCR2_GR10_3 ((uint32_t)0x00000004) /*!< GR10-3 selection bit */ +#define RI_ASCR2_GR10_4 ((uint32_t)0x00000008) /*!< GR10-4 selection bit */ +#define RI_ASCR2_GR6_1 ((uint32_t)0x00000010) /*!< GR6-1 selection bit */ +#define RI_ASCR2_GR6_2 ((uint32_t)0x00000020) /*!< GR6-2 selection bit */ +#define RI_ASCR2_GR5_1 ((uint32_t)0x00000040) /*!< GR5-1 selection bit */ +#define RI_ASCR2_GR5_2 ((uint32_t)0x00000080) /*!< GR5-2 selection bit */ +#define RI_ASCR2_GR5_3 ((uint32_t)0x00000100) /*!< GR5-3 selection bit */ +#define RI_ASCR2_GR4_1 ((uint32_t)0x00000200) /*!< GR4-1 selection bit */ +#define RI_ASCR2_GR4_2 ((uint32_t)0x00000400) /*!< GR4-2 selection bit */ +#define RI_ASCR2_GR4_3 ((uint32_t)0x00000800) /*!< GR4-3 selection bit */ +#define RI_ASCR2_GR4_4 ((uint32_t)0x00008000) /*!< GR4-4 selection bit */ +#define RI_ASCR2_CH0b ((uint32_t)0x00010000) /*!< CH0b selection bit */ +#define RI_ASCR2_CH1b ((uint32_t)0x00020000) /*!< CH1b selection bit */ +#define RI_ASCR2_CH2b ((uint32_t)0x00040000) /*!< CH2b selection bit */ +#define RI_ASCR2_CH3b ((uint32_t)0x00080000) /*!< CH3b selection bit */ +#define RI_ASCR2_CH6b ((uint32_t)0x00100000) /*!< CH6b selection bit */ +#define RI_ASCR2_CH7b ((uint32_t)0x00200000) /*!< CH7b selection bit */ +#define RI_ASCR2_CH8b ((uint32_t)0x00400000) /*!< CH8b selection bit */ +#define RI_ASCR2_CH9b ((uint32_t)0x00800000) /*!< CH9b selection bit */ +#define RI_ASCR2_CH10b ((uint32_t)0x01000000) /*!< CH10b selection bit */ +#define RI_ASCR2_CH11b ((uint32_t)0x02000000) /*!< CH11b selection bit */ +#define RI_ASCR2_CH12b ((uint32_t)0x04000000) /*!< CH12b selection bit */ +#define RI_ASCR2_GR6_3 ((uint32_t)0x08000000) /*!< GR6-3 selection bit */ +#define RI_ASCR2_GR6_4 ((uint32_t)0x10000000) /*!< GR6-4 selection bit */ + +/******************** Bit definition for RI_HYSCR1 register ********************/ +#define RI_HYSCR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A Hysteresis selection */ +#define RI_HYSCR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_HYSCR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_HYSCR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_HYSCR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_HYSCR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_HYSCR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_HYSCR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_HYSCR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_HYSCR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_HYSCR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_HYSCR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_HYSCR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_HYSCR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_HYSCR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_HYSCR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_HYSCR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +#define RI_HYSCR1_PB ((uint32_t)0xFFFF0000) /*!< PB[15:0] Port B Hysteresis selection */ +#define RI_HYSCR1_PB_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define RI_HYSCR1_PB_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define RI_HYSCR1_PB_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define RI_HYSCR1_PB_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define RI_HYSCR1_PB_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define RI_HYSCR1_PB_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define RI_HYSCR1_PB_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define RI_HYSCR1_PB_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define RI_HYSCR1_PB_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define RI_HYSCR1_PB_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define RI_HYSCR1_PB_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define RI_HYSCR1_PB_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define RI_HYSCR1_PB_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define RI_HYSCR1_PB_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define RI_HYSCR1_PB_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define RI_HYSCR1_PB_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/******************** Bit definition for RI_HYSCR2 register ********************/ +#define RI_HYSCR2_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C Hysteresis selection */ +#define RI_HYSCR2_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_HYSCR2_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_HYSCR2_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_HYSCR2_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_HYSCR2_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_HYSCR2_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_HYSCR2_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_HYSCR2_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_HYSCR2_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_HYSCR2_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_HYSCR2_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_HYSCR2_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_HYSCR2_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_HYSCR2_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_HYSCR2_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_HYSCR2_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +#define RI_HYSCR2_PD ((uint32_t)0xFFFF0000) /*!< PD[15:0] Port D Hysteresis selection */ +#define RI_HYSCR2_PD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define RI_HYSCR2_PD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define RI_HYSCR2_PD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define RI_HYSCR2_PD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define RI_HYSCR2_PD_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define RI_HYSCR2_PD_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define RI_HYSCR2_PD_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define RI_HYSCR2_PD_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define RI_HYSCR2_PD_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define RI_HYSCR2_PD_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define RI_HYSCR2_PD_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define RI_HYSCR2_PD_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define RI_HYSCR2_PD_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define RI_HYSCR2_PD_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define RI_HYSCR2_PD_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define RI_HYSCR2_PD_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/******************** Bit definition for RI_HYSCR3 register ********************/ +#define RI_HYSCR3_PE ((uint32_t)0x0000FFFF) /*!< PE[15:0] Port E Hysteresis selection */ +#define RI_HYSCR3_PE_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_HYSCR3_PE_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_HYSCR3_PE_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_HYSCR3_PE_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_HYSCR3_PE_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_HYSCR3_PE_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_HYSCR3_PE_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_HYSCR3_PE_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_HYSCR3_PE_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_HYSCR3_PE_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_HYSCR3_PE_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_HYSCR3_PE_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_HYSCR3_PE_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_HYSCR3_PE_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_HYSCR3_PE_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_HYSCR3_PE_15 ((uint32_t)0x00008000) /*!< Bit 15 */ +#define RI_HYSCR3_PF ((uint32_t)0xFFFF0000) /*!< PF[15:0] Port F Hysteresis selection */ +#define RI_HYSCR3_PF_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define RI_HYSCR3_PF_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define RI_HYSCR3_PF_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define RI_HYSCR3_PF_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define RI_HYSCR3_PF_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define RI_HYSCR3_PF_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define RI_HYSCR3_PF_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define RI_HYSCR3_PF_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define RI_HYSCR3_PF_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define RI_HYSCR3_PF_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define RI_HYSCR3_PF_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define RI_HYSCR3_PF_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define RI_HYSCR3_PF_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define RI_HYSCR3_PF_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define RI_HYSCR3_PF_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define RI_HYSCR3_PF_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/******************** Bit definition for RI_HYSCR4 register ********************/ +#define RI_HYSCR4_PG ((uint32_t)0x0000FFFF) /*!< PG[15:0] Port G Hysteresis selection */ +#define RI_HYSCR4_PG_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_HYSCR4_PG_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_HYSCR4_PG_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_HYSCR4_PG_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_HYSCR4_PG_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_HYSCR4_PG_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_HYSCR4_PG_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_HYSCR4_PG_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_HYSCR4_PG_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_HYSCR4_PG_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_HYSCR4_PG_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_HYSCR4_PG_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_HYSCR4_PG_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_HYSCR4_PG_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_HYSCR4_PG_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_HYSCR4_PG_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_ASMR1 register ********************/ +#define RI_ASMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/ +#define RI_ASMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CMR1 register ********************/ +#define RI_CMR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/ +#define RI_CMR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CMR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CMR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CMR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CMR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CMR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CMR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CMR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CMR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CMR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CMR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CMR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CMR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CMR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CMR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CMR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CICR1 register ********************/ +#define RI_CICR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A selection*/ +#define RI_CICR1_PA_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CICR1_PA_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CICR1_PA_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CICR1_PA_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CICR1_PA_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CICR1_PA_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CICR1_PA_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CICR1_PA_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CICR1_PA_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CICR1_PA_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CICR1_PA_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CICR1_PA_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CICR1_PA_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CICR1_PA_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CICR1_PA_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CICR1_PA_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_ASMR2 register ********************/ +#define RI_ASMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */ +#define RI_ASMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CMR2 register ********************/ +#define RI_CMR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */ +#define RI_CMR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CMR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CMR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CMR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CMR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CMR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CMR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CMR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CMR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CMR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CMR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CMR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CMR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CMR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CMR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CMR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CICR2 register ********************/ +#define RI_CICR2_PB ((uint32_t)0x0000FFFF) /*!< PB[15:0] Port B selection */ +#define RI_CICR2_PB_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CICR2_PB_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CICR2_PB_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CICR2_PB_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CICR2_PB_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CICR2_PB_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CICR2_PB_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CICR2_PB_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CICR2_PB_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CICR2_PB_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CICR2_PB_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CICR2_PB_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CICR2_PB_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CICR2_PB_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CICR2_PB_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CICR2_PB_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_ASMR3 register ********************/ +#define RI_ASMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */ +#define RI_ASMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CMR3 register ********************/ +#define RI_CMR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */ +#define RI_CMR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CMR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CMR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CMR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CMR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CMR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CMR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CMR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CMR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CMR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CMR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CMR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CMR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CMR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CMR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CMR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CICR3 register ********************/ +#define RI_CICR3_PC ((uint32_t)0x0000FFFF) /*!< PC[15:0] Port C selection */ +#define RI_CICR3_PC_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CICR3_PC_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CICR3_PC_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CICR3_PC_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CICR3_PC_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CICR3_PC_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CICR3_PC_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CICR3_PC_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CICR3_PC_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CICR3_PC_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CICR3_PC_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CICR3_PC_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CICR3_PC_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CICR3_PC_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CICR3_PC_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CICR3_PC_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_ASMR4 register ********************/ +#define RI_ASMR4_PF ((uint32_t)0x0000FFFF) /*!< PF[15:0] Port F selection */ +#define RI_ASMR4_PF_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASMR4_PF_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASMR4_PF_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASMR4_PF_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASMR4_PF_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASMR4_PF_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASMR4_PF_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASMR4_PF_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASMR4_PF_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASMR4_PF_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASMR4_PF_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASMR4_PF_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASMR4_PF_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASMR4_PF_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASMR4_PF_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASMR4_PF_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CMR4 register ********************/ +#define RI_CMR4_PF ((uint32_t)0x0000FFFF) /*!< PF[15:0] Port F selection */ +#define RI_CMR4_PF_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CMR4_PF_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CMR4_PF_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CMR4_PF_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CMR4_PF_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CMR4_PF_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CMR4_PF_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CMR4_PF_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CMR4_PF_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CMR4_PF_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CMR4_PF_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CMR4_PF_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CMR4_PF_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CMR4_PF_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CMR4_PF_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CMR4_PF_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CICR4 register ********************/ +#define RI_CICR4_PF ((uint32_t)0x0000FFFF) /*!< PF[15:0] Port F selection */ +#define RI_CICR4_PF_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CICR4_PF_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CICR4_PF_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CICR4_PF_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CICR4_PF_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CICR4_PF_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CICR4_PF_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CICR4_PF_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CICR4_PF_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CICR4_PF_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CICR4_PF_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CICR4_PF_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CICR4_PF_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CICR4_PF_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CICR4_PF_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CICR4_PF_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_ASMR5 register ********************/ +#define RI_ASMR5_PG ((uint32_t)0x0000FFFF) /*!< PG[15:0] Port G selection */ +#define RI_ASMR5_PG_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_ASMR5_PG_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_ASMR5_PG_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_ASMR5_PG_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_ASMR5_PG_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_ASMR5_PG_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_ASMR5_PG_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_ASMR5_PG_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_ASMR5_PG_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_ASMR5_PG_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_ASMR5_PG_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_ASMR5_PG_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_ASMR5_PG_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_ASMR5_PG_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_ASMR5_PG_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_ASMR5_PG_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CMR5 register ********************/ +#define RI_CMR5_PG ((uint32_t)0x0000FFFF) /*!< PG[15:0] Port G selection */ +#define RI_CMR5_PG_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CMR5_PG_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CMR5_PG_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CMR5_PG_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CMR5_PG_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CMR5_PG_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CMR5_PG_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CMR5_PG_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CMR5_PG_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CMR5_PG_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CMR5_PG_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CMR5_PG_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CMR5_PG_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CMR5_PG_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CMR5_PG_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CMR5_PG_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************** Bit definition for RI_CICR5 register ********************/ +#define RI_CICR5_PG ((uint32_t)0x0000FFFF) /*!< PG[15:0] Port G selection */ +#define RI_CICR5_PG_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RI_CICR5_PG_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define RI_CICR5_PG_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define RI_CICR5_PG_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define RI_CICR5_PG_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define RI_CICR5_PG_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define RI_CICR5_PG_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define RI_CICR5_PG_7 ((uint32_t)0x00000080) /*!< Bit 7 */ +#define RI_CICR5_PG_8 ((uint32_t)0x00000100) /*!< Bit 8 */ +#define RI_CICR5_PG_9 ((uint32_t)0x00000200) /*!< Bit 9 */ +#define RI_CICR5_PG_10 ((uint32_t)0x00000400) /*!< Bit 10 */ +#define RI_CICR5_PG_11 ((uint32_t)0x00000800) /*!< Bit 11 */ +#define RI_CICR5_PG_12 ((uint32_t)0x00001000) /*!< Bit 12 */ +#define RI_CICR5_PG_13 ((uint32_t)0x00002000) /*!< Bit 13 */ +#define RI_CICR5_PG_14 ((uint32_t)0x00004000) /*!< Bit 14 */ +#define RI_CICR5_PG_15 ((uint32_t)0x00008000) /*!< Bit 15 */ + +/******************************************************************************/ +/* */ +/* Timers (TIM) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */ +#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */ +#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */ +#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */ +#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */ + +#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */ +#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */ + +#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */ + +#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */ + +#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */ + +#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */ + +#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */ + +#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */ + +#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */ +#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */ +#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */ +#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */ +#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */ +#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */ +#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */ +#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */ +#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint32_t)0x0000FFFF) /*!<Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint32_t)0x0000FFFF) /*!<actual auto-reload Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */ +#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */ +#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */ +#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */ + +#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */ +#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */ +#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */ +#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */ +#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */ + +/******************* Bit definition for TIM_OR register *********************/ +#define TIM_OR_TI1RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM Input 1 remap) */ +#define TIM_OR_TI1RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define TIM_OR_TI1RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */ + +#define TIM_OR_ETR_RMP ((uint32_t)0x00000004) /*!<ETR_RMP bit (TIM10/11 ETR remap)*/ +#define TIM_OR_TI1_RMP_RI ((uint32_t)0x00000008) /*!<TI1_RMP_RI bit (TIM10/11 Input 1 remap for Routing interface) */ + +/*----------------------------------------------------------------------------*/ +#define TIM9_OR_ITR1_RMP ((uint32_t)0x00000004) /*!<ITR1_RMP bit (TIM9 Internal trigger 1 remap) */ + +/*----------------------------------------------------------------------------*/ +#define TIM2_OR_ITR1_RMP ((uint32_t)0x00000001) /*!<ITR1_RMP bit (TIM2 Internal trigger 1 remap) */ + +/*----------------------------------------------------------------------------*/ +#define TIM3_OR_ITR2_RMP ((uint32_t)0x00000001) /*!<ITR2_RMP bit (TIM3 Internal trigger 2 remap) */ + +/*----------------------------------------------------------------------------*/ + + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint32_t)0x00000001) /*!< Parity Error */ +#define USART_SR_FE ((uint32_t)0x00000002) /*!< Framing Error */ +#define USART_SR_NE ((uint32_t)0x00000004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint32_t)0x00000200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint32_t)0x000001FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint32_t)0x00000001) /*!< Send Break */ +#define USART_CR1_RWU ((uint32_t)0x00000002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Wakeup method */ +#define USART_CR1_M ((uint32_t)0x00001000) /*!< Word length */ +#define USART_CR1_UE ((uint32_t)0x00002000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit mode */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint32_t)0x0000000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Universal Serial Bus (USB) */ +/* */ +/******************************************************************************/ + +/*!<Endpoint-specific registers */ + +#define USB_EP0R USB_BASE /*!< endpoint 0 register address */ +#define USB_EP1R (USB_BASE + 0x00000004) /*!< endpoint 1 register address */ +#define USB_EP2R (USB_BASE + 0x00000008) /*!< endpoint 2 register address */ +#define USB_EP3R (USB_BASE + 0x0000000C) /*!< endpoint 3 register address */ +#define USB_EP4R (USB_BASE + 0x00000010) /*!< endpoint 4 register address */ +#define USB_EP5R (USB_BASE + 0x00000014) /*!< endpoint 5 register address */ +#define USB_EP6R (USB_BASE + 0x00000018) /*!< endpoint 6 register address */ +#define USB_EP7R (USB_BASE + 0x0000001C) /*!< endpoint 7 register address */ + +/* bit positions */ +#define USB_EP_CTR_RX ((uint32_t)0x00008000) /*!< EndPoint Correct TRansfer RX */ +#define USB_EP_DTOG_RX ((uint32_t)0x00004000) /*!< EndPoint Data TOGGLE RX */ +#define USB_EPRX_STAT ((uint32_t)0x00003000) /*!< EndPoint RX STATus bit field */ +#define USB_EP_SETUP ((uint32_t)0x00000800) /*!< EndPoint SETUP */ +#define USB_EP_T_FIELD ((uint32_t)0x00000600) /*!< EndPoint TYPE */ +#define USB_EP_KIND ((uint32_t)0x00000100) /*!< EndPoint KIND */ +#define USB_EP_CTR_TX ((uint32_t)0x00000080) /*!< EndPoint Correct TRansfer TX */ +#define USB_EP_DTOG_TX ((uint32_t)0x00000040) /*!< EndPoint Data TOGGLE TX */ +#define USB_EPTX_STAT ((uint32_t)0x00000030) /*!< EndPoint TX STATus bit field */ +#define USB_EPADDR_FIELD ((uint32_t)0x0000000F) /*!< EndPoint ADDRess FIELD */ + +/* EndPoint REGister MASK (no toggle fields) */ +#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD) + /*!< EP_TYPE[1:0] EndPoint TYPE */ +#define USB_EP_TYPE_MASK ((uint32_t)0x00000600) /*!< EndPoint TYPE Mask */ +#define USB_EP_BULK ((uint32_t)0x00000000) /*!< EndPoint BULK */ +#define USB_EP_CONTROL ((uint32_t)0x00000200) /*!< EndPoint CONTROL */ +#define USB_EP_ISOCHRONOUS ((uint32_t)0x00000400) /*!< EndPoint ISOCHRONOUS */ +#define USB_EP_INTERRUPT ((uint32_t)0x00000600) /*!< EndPoint INTERRUPT */ +#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK) + +#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */ + /*!< STAT_TX[1:0] STATus for TX transfer */ +#define USB_EP_TX_DIS ((uint32_t)0x00000000) /*!< EndPoint TX DISabled */ +#define USB_EP_TX_STALL ((uint32_t)0x00000010) /*!< EndPoint TX STALLed */ +#define USB_EP_TX_NAK ((uint32_t)0x00000020) /*!< EndPoint TX NAKed */ +#define USB_EP_TX_VALID ((uint32_t)0x00000030) /*!< EndPoint TX VALID */ +#define USB_EPTX_DTOG1 ((uint32_t)0x00000010) /*!< EndPoint TX Data TOGgle bit1 */ +#define USB_EPTX_DTOG2 ((uint32_t)0x00000020) /*!< EndPoint TX Data TOGgle bit2 */ +#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK) + /*!< STAT_RX[1:0] STATus for RX transfer */ +#define USB_EP_RX_DIS ((uint32_t)0x00000000) /*!< EndPoint RX DISabled */ +#define USB_EP_RX_STALL ((uint32_t)0x00001000) /*!< EndPoint RX STALLed */ +#define USB_EP_RX_NAK ((uint32_t)0x00002000) /*!< EndPoint RX NAKed */ +#define USB_EP_RX_VALID ((uint32_t)0x00003000) /*!< EndPoint RX VALID */ +#define USB_EPRX_DTOG1 ((uint32_t)0x00001000) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOG2 ((uint32_t)0x00002000) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) + +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP0R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP1R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP2R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP3R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP4R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP5R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP6R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint32_t)0x0000000F) /*!<Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint32_t)0x00000030) /*!<STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint32_t)0x00000010) /*!<Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint32_t)0x00000020) /*!<Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint32_t)0x00000040) /*!<Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint32_t)0x00000080) /*!<Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint32_t)0x00000100) /*!<Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint32_t)0x00000600) /*!<EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint32_t)0x00000200) /*!<Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint32_t)0x00000400) /*!<Bit 1 */ + +#define USB_EP7R_SETUP ((uint32_t)0x00000800) /*!<Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint32_t)0x00003000) /*!<STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint32_t)0x00001000) /*!<Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint32_t)0x00002000) /*!<Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint32_t)0x00004000) /*!<Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint32_t)0x00008000) /*!<Correct Transfer for reception */ + +/*!<Common registers */ + +#define USB_CNTR (USB_BASE + 0x00000040) /*!< Control register */ +#define USB_ISTR (USB_BASE + 0x00000044) /*!< Interrupt status register */ +#define USB_FNR (USB_BASE + 0x00000048) /*!< Frame number register */ +#define USB_DADDR (USB_BASE + 0x0000004C) /*!< Device address register */ +#define USB_BTABLE (USB_BASE + 0x00000050) /*!< Buffer Table address register */ + + + +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint32_t)0x00000001) /*!<Force USB Reset */ +#define USB_CNTR_PDWN ((uint32_t)0x00000002) /*!<Power down */ +#define USB_CNTR_LP_MODE ((uint32_t)0x00000004) /*!<Low-power mode */ +#define USB_CNTR_FSUSP ((uint32_t)0x00000008) /*!<Force suspend */ +#define USB_CNTR_RESUME ((uint32_t)0x00000010) /*!<Resume request */ +#define USB_CNTR_ESOFM ((uint32_t)0x00000100) /*!<Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint32_t)0x00000200) /*!<Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint32_t)0x00000400) /*!<RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint32_t)0x00000800) /*!<Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint32_t)0x00001000) /*!<Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint32_t)0x00002000) /*!<Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint32_t)0x00008000) /*!<Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint32_t)0x0000000F) /*!<Endpoint Identifier */ +#define USB_ISTR_DIR ((uint32_t)0x00000010) /*!<Direction of transaction */ +#define USB_ISTR_ESOF ((uint32_t)0x00000100) /*!<Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint32_t)0x00000200) /*!<Start Of Frame */ +#define USB_ISTR_RESET ((uint32_t)0x00000400) /*!<USB RESET request */ +#define USB_ISTR_SUSP ((uint32_t)0x00000800) /*!<Suspend mode request */ +#define USB_ISTR_WKUP ((uint32_t)0x00001000) /*!<Wake up */ +#define USB_ISTR_ERR ((uint32_t)0x00002000) /*!<Error */ +#define USB_ISTR_PMAOVRM ((uint32_t)0x00004000) /*!<Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint32_t)0x00008000) /*!<Correct Transfer */ + +#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */ +#define USB_CLR_PMAOVRM (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/ +#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */ +#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */ +#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */ +#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */ +#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */ +#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */ + + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint32_t)0x000007FF) /*!<Frame Number */ +#define USB_FNR_LSOF ((uint32_t)0x00001800) /*!<Lost SOF */ +#define USB_FNR_LCK ((uint32_t)0x00002000) /*!<Locked */ +#define USB_FNR_RXDM ((uint32_t)0x00004000) /*!<Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint32_t)0x00008000) /*!<Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint32_t)0x0000007F) /*!<ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */ +#define USB_DADDR_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */ +#define USB_DADDR_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */ +#define USB_DADDR_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */ +#define USB_DADDR_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */ +#define USB_DADDR_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */ +#define USB_DADDR_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */ + +#define USB_DADDR_EF ((uint32_t)0x00000080) /*!<Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint32_t)0x0000FFF8) /*!<Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint32_t)0x0000FFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint32_t)0x0000000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint32_t)0x000003FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint32_t)0x0000FFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint32_t)0x000003FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint32_t)0x00007C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint32_t)0x00008000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG (WWDG) */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint32_t)0x0000007F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint32_t)0x00000040) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint32_t)0x00000080) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint32_t)0x0000007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint32_t)0x00000040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint32_t)0x00000180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint32_t)0x00000080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint32_t)0x00000100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint32_t)0x00000200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint32_t)0x00000001) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* SystemTick (SysTick) */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller (NVIC) */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint32_t)0x00000002) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint32_t)0x00000004) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint32_t)0x00000010) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint32_t)0x00000001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint32_t)0x00000002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint32_t)0x00000008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint32_t)0x00000010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint32_t)0x00000100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint32_t)0x00000200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint32_t)0x00000001) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint32_t)0x00000002) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint32_t)0x00000004) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint32_t)0x00000008) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint32_t)0x00000010) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ +/** + * @} + */ + + /** + * @} + */ +/** @addtogroup Exported_macro + * @{ + */ + +/****************************** ADC Instances *********************************/ +#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) + +/******************************** COMP Instances ******************************/ +#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \ + ((INSTANCE) == COMP2)) + +/****************************** CRC Instances *********************************/ +#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC) + +/****************************** DAC Instances *********************************/ +#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC) + +/****************************** DMA Instances *********************************/ +#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \ + ((INSTANCE) == DMA1_Channel2) || \ + ((INSTANCE) == DMA1_Channel3) || \ + ((INSTANCE) == DMA1_Channel4) || \ + ((INSTANCE) == DMA1_Channel5) || \ + ((INSTANCE) == DMA1_Channel6) || \ + ((INSTANCE) == DMA1_Channel7) || \ + ((INSTANCE) == DMA2_Channel1) || \ + ((INSTANCE) == DMA2_Channel2) || \ + ((INSTANCE) == DMA2_Channel3) || \ + ((INSTANCE) == DMA2_Channel4) || \ + ((INSTANCE) == DMA2_Channel5)) + +/******************************* GPIO Instances *******************************/ +#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ + ((INSTANCE) == GPIOB) || \ + ((INSTANCE) == GPIOC) || \ + ((INSTANCE) == GPIOD) || \ + ((INSTANCE) == GPIOE) || \ + ((INSTANCE) == GPIOF) || \ + ((INSTANCE) == GPIOG) || \ + ((INSTANCE) == GPIOH)) + +/**************************** GPIO Lock Instances *****************************/ +/* On L1, all GPIO Bank support the Lock mechanism */ +#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) + +/******************************** I2C Instances *******************************/ +#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \ + ((INSTANCE) == I2C2)) + +#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \ + ((INSTANCE) == SPI2) || \ + ((INSTANCE) == SPI3)) +/****************************** IWDG Instances ********************************/ +#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG) + +/****************************** OPAMP Instances *******************************/ +#define IS_OPAMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == OPAMP1) || \ + ((INSTANCE) == OPAMP2)) + +/****************************** RTC Instances *********************************/ +#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC) + +/******************************** SPI Instances *******************************/ +#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \ + ((INSTANCE) == SPI2) || \ + ((INSTANCE) == SPI3)) + +/****************************** TIM Instances *********************************/ +#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM6) || \ + ((INSTANCE) == TIM7) || \ + ((INSTANCE) == TIM9) || \ + ((INSTANCE) == TIM10) || \ + ((INSTANCE) == TIM11)) + +#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9) || \ + ((INSTANCE) == TIM10) || \ + ((INSTANCE) == TIM11)) + +#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5)) + +#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5)) + +#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9) || \ + ((INSTANCE) == TIM10) || \ + ((INSTANCE) == TIM11)) + +#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4)) + +#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5)) + +#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM6) || \ + ((INSTANCE) == TIM7) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE) ((INSTANCE) == TIM5) + +#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5)) + +#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \ + ((((INSTANCE) == TIM2) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4))) \ + || \ + (((INSTANCE) == TIM3) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4))) \ + || \ + (((INSTANCE) == TIM4) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4))) \ + || \ + (((INSTANCE) == TIM5) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2) || \ + ((CHANNEL) == TIM_CHANNEL_3) || \ + ((CHANNEL) == TIM_CHANNEL_4))) \ + || \ + (((INSTANCE) == TIM9) && \ + (((CHANNEL) == TIM_CHANNEL_1) || \ + ((CHANNEL) == TIM_CHANNEL_2))) \ + || \ + (((INSTANCE) == TIM10) && \ + (((CHANNEL) == TIM_CHANNEL_1))) \ + || \ + (((INSTANCE) == TIM11) && \ + (((CHANNEL) == TIM_CHANNEL_1)))) + +#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9) || \ + ((INSTANCE) == TIM10) || \ + ((INSTANCE) == TIM11)) + +#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM6) || \ + ((INSTANCE) == TIM7)) + +#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5)) + +#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM4) || \ + ((INSTANCE) == TIM5) || \ + ((INSTANCE) == TIM9)) + +#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \ + ((INSTANCE) == TIM3) || \ + ((INSTANCE) == TIM9) || \ + ((INSTANCE) == TIM10) || \ + ((INSTANCE) == TIM11)) + +/******************** USART Instances : Synchronous mode **********************/ +#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3)) + +/******************** UART Instances : Asynchronous mode **********************/ +#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3) || \ + ((INSTANCE) == UART4) || \ + ((INSTANCE) == UART5)) + +/******************** UART Instances : Half-Duplex mode **********************/ +#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3) || \ + ((INSTANCE) == UART4) || \ + ((INSTANCE) == UART5)) + +/******************** UART Instances : LIN mode **********************/ +#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3) || \ + ((INSTANCE) == UART4) || \ + ((INSTANCE) == UART5)) + +/****************** UART Instances : Hardware Flow control ********************/ +#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3)) + +/********************* UART Instances : Smard card mode ***********************/ +#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3)) + +/*********************** UART Instances : IRDA mode ***************************/ +#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3) || \ + ((INSTANCE) == UART4) || \ + ((INSTANCE) == UART5)) + +/***************** UART Instances : Multi-Processor mode **********************/ +#define IS_UART_MULTIPROCESSOR_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ + ((INSTANCE) == USART2) || \ + ((INSTANCE) == USART3) || \ + ((INSTANCE) == UART4) || \ + ((INSTANCE) == UART5)) + +/****************************** WWDG Instances ********************************/ +#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG) + + +/****************************** LCD Instances ********************************/ +#define IS_LCD_ALL_INSTANCE(INSTANCE) ((INSTANCE) == LCD) + +/****************************** USB Instances ********************************/ +#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB) + +/** + * @} + */ + +/******************************************************************************/ +/* For a painless codes migration between the STM32L1xx device product */ +/* lines, the aliases defined below are put in place to overcome the */ +/* differences in the interrupt handlers and IRQn definitions. */ +/* No need to update developed interrupt code when moving across */ +/* product lines within the same STM32L1 Family */ +/******************************************************************************/ + +/* Aliases for __IRQn */ + +/* Aliases for __IRQHandler */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L152xE_H */ + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l1xx.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l1xx.h new file mode 100644 index 0000000000..199a5517f8 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/stm32l1xx.h @@ -0,0 +1,247 @@ +/** + ****************************************************************************** + * @file stm32l1xx.h + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief CMSIS STM32L1xx Device Peripheral Access Layer Header File. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The STM32L1xx device used in the target application + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx + * @{ + */ + +#ifndef __STM32L1XX_H +#define __STM32L1XX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32L device used in your + application + */ + +#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \ + !defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xE) && \ + !defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xE) && \ + !defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xE) + /* #define STM32L100xB */ /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */ + /* #define STM32L100xBA */ /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */ + /* #define STM32L100xC */ /*!< STM32L100RC Devices */ + /* #define STM32L151xB */ /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */ + /* #define STM32L151xBA */ /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */ + /* #define STM32L151xC */ /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */ + /* #define STM32L151xCA */ /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */ + /* #define STM32L151xD */ /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */ + /* #define STM32L151xE */ /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */ + /* #define STM32L152xB */ /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */ + /* #define STM32L152xBA */ /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */ + /* #define STM32L152xC */ /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */ + /* #define STM32L152xCA */ /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */ + /* #define STM32L152xD */ /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */ +#define STM32L152xE /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */ + /* #define STM32L162xC */ /*!< STM32L162RC and STM32L162VC */ + /* #define STM32L162xCA */ /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */ + /* #define STM32L162xD */ /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */ + /* #define STM32L162xE */ /*!< STM32L162RE, STM32L162VE and STM32L162ZE */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ +#define USE_HAL_DRIVER +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V2.0.0 + */ +#define __STM32L1xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ +#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32L1xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32L1xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L1xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_HAL_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32L100xB) + #include "stm32l100xb.h" +#elif defined(STM32L100xBA) + #include "stm32l100xba.h" +#elif defined(STM32L100xC) + #include "stm32l100xc.h" +#elif defined(STM32L151xB) + #include "stm32l151xb.h" +#elif defined(STM32L151xBA) + #include "stm32l151xba.h" +#elif defined(STM32L151xC) + #include "stm32l151xc.h" +#elif defined(STM32L151xCA) + #include "stm32l151xca.h" +#elif defined(STM32L151xD) + #include "stm32l151xd.h" +#elif defined(STM32L151xE) + #include "stm32l151xe.h" +#elif defined(STM32L152xB) + #include "stm32l152xb.h" +#elif defined(STM32L152xBA) + #include "stm32l152xba.h" +#elif defined(STM32L152xC) + #include "stm32l152xc.h" +#elif defined(STM32L152xCA) + #include "stm32l152xca.h" +#elif defined(STM32L152xD) + #include "stm32l152xd.h" +#elif defined(STM32L152xE) + #include "stm32l152xe.h" +#elif defined(STM32L162xC) + #include "stm32l162xc.h" +#elif defined(STM32L162xCA) + #include "stm32l162xca.h" +#elif defined(STM32L162xD) + #include "stm32l162xd.h" +#elif defined(STM32L162xE) + #include "stm32l162xe.h" +#else + #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l1xx_hal.h" +#endif /* USE_HAL_DRIVER */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L1xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.c new file mode 100644 index 0000000000..b5b3a8d48b --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.c @@ -0,0 +1,604 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.c + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l1xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * This file configures the system clock as follows: + *----------------------------------------------------------------------------- + * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI + * | (external 8 MHz clock) | (internal 16 MHz) + * | 2- PLL_HSE_XTAL | + * | (external 8 MHz xtal) | + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 24 | 32 + *----------------------------------------------------------------------------- + * AHBCLK (MHz) | 24 | 32 + *----------------------------------------------------------------------------- + * APB1CLK (MHz) | 24 | 32 + *----------------------------------------------------------------------------- + * APB2CLK (MHz) | 24 | 32 + *----------------------------------------------------------------------------- + * USB capable (48 MHz precise clock) | YES | NO + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** @addtogroup STM32L1xx_System_Private_Includes + * @{ + */ + +#include "stm32l1xx.h" +#include "hal_tick.h" + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM32L152D_EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Macros + * @{ + */ + +/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */ +#define USE_PLL_HSE_EXTC (1) /* Use external clock */ +#define USE_PLL_HSE_XTAL (1) /* Use external xtal */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 32000000; /* Default with HSI. Will be updated if HSE is used */ +const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48}; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +uint8_t SetSysClock_PLL_HSI(void); + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /*!< Set MSION bit */ + RCC->CR |= (uint32_t)0x00000100; + + /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */ + RCC->CFGR &= (uint32_t)0x88FFC00C; + + /*!< Reset HSION, HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xEEFEFFFE; + + /*!< Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */ + RCC->CFGR &= (uint32_t)0xFF02FFFF; + + /*!< Disable all interrupts */ + RCC->CIR = 0x00000000; + +#ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM */ + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = 16000000; // At this stage the HSI is used as system clock + HAL_Init(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI + * value as defined by the MSI range. + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + case 0x04: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x08: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x0C: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmul = RCC->CFGR & RCC_CFGR_PLLMUL; + plldiv = RCC->CFGR & RCC_CFGR_PLLDIV; + pllmul = PLLMulTable[(pllmul >> 18)]; + plldiv = (plldiv >> 22) + 1; + + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + + if (pllsource == 0x00) + { + /* HSI oscillator clock selected as PLL clock entry */ + SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv); + } + else + { + /* HSE selected as PLL clock entry */ + SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv); + } + break; + default: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in SystemInit() function before jump to main. + * This function configures the external SRAM mounted on STM32L152D_EVAL board + * This SRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+------------------+------------------+ + + SRAM pins assignment + + +-------------------+--------------------+------------------+------------------+ + | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | + | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | + | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | + | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | + | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | + | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | + | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 | + | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+ + | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 | + | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 | + | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+ + | PD15 <-> FSMC_D1 |--------------------+ + +-------------------+ +*/ + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHBENR = 0x000080D8; + + /* Connect PDx pins to FSMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A0A; + /* Configure PDx pins speed to 40 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FSMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 40 MHz */ + GPIOE->OSPEEDR = 0xFFFFC00F; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FSMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 40 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FSMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x00000C00; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 40 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FSMC Configuration ------------------------------------------------------*/ + /* Enable the FSMC interface clock */ + RCC->AHBENR = 0x400080D8; + + /* Configure and enable Bank1_SRAM3 */ + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000300; + FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF; +/* + Bank1_SRAM3 is configured as follow: + + p.FSMC_AddressSetupTime = 0; + p.FSMC_AddressHoldTime = 0; + p.FSMC_DataSetupTime = 3; + p.FSMC_BusTurnAroundDuration = 0; + p.FSMC_CLKDivision = 0; + p.FSMC_DataLatency = 0; + p.FSMC_AccessMode = FSMC_AccessMode_A; + + FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3; + FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; + FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; + FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; + FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; + FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; + + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE); +*/ + +} +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +void SetSysClock(void) +{ + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ + #if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) + #endif + { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1); +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Used to gain time after DeepSleep in case HSI is used */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + return 0; + } + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI; + if (bypass == 0) + { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 8 MHz xtal on OSC_IN/OSC_OUT */ + } + else + { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 8 MHz clock on OSC_IN */ + } + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + // SYSCLK = 24 MHz ((8 MHz * 6) / 2) + // USBCLK = 48 MHz (8 MHz * 6) --> USB OK + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 24 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 24 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 24 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 24 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //if (bypass == 0) + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz + //else + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz + + return 1; // OK +} +#endif + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSI oscillator and activate PLL with HSI as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + // SYSCLK = 32 MHz ((16 MHz * 4) / 2) + // USBCLK = 64 MHz (16 MHz * 4) --> USB not possible + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4; + RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */ + while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {}; + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz + + return 1; // OK +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.h new file mode 100644 index 0000000000..62e216539a --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NUCLEO_L152RE/system_stm32l1xx.h @@ -0,0 +1,123 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.h + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief CMSIS Cortex-M3 Device System Source File for STM32L1xx devices. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32L1XX_H +#define __SYSTEM_STM32L1XX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32L1xx_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32L1xx_System_Exported_types + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetSysClockFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +extern void SetSysClock(void); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32L1XX_H */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |