diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_comp.h')
-rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_comp.h | 557 |
1 files changed, 557 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_comp.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_comp.h new file mode 100644 index 0000000000..df5e9d2c37 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_comp.h @@ -0,0 +1,557 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_comp.h + * @author MCD Application Team + * @version V1.2.0 + * @date 06-February-2015 + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0xx_HAL_COMP_H +#define __STM32L0xx_HAL_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l0xx_hal_def.h" + +/** @addtogroup STM32L0xx_HAL_Driver + * @{ + */ + +/** @defgroup COMP COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ + + /** @defgroup COMP_Init COMP init configuration structure + * @{ + */ +/** + * @brief COMP Init structure definition + */ + +typedef struct +{ + + uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. + This parameter can be a value of @ref COMP_InvertingInput */ + + uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. + This parameter can be a value of @ref COMP_NonInvertingInput */ + + uint32_t LPTIMConnection; /*!< Selects if the COMP connection to the LPTIM is established or not. + This parameter can be a value of @ref COMP_LPTIMConnection */ + + uint32_t OutputPol; /*!< Selects the output polarity of the comparator. + This parameter can be a value of @ref COMP_OutputPolarity */ + + uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator + to adjust the speed/consumption. + This parameter can be a value of @ref COMP_Mode */ + + uint32_t WindowMode; /*!< Selects the window mode of the comparator 2. + This parameter can be a value of @ref COMP_WindowMode */ + + uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). + This parameter can be a value of @ref COMP_TriggerMode */ + +}COMP_InitTypeDef; + +/** + * @} + */ + +/** @defgroup COMP_state COMP state definition + * @{ + */ +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ + HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ +}HAL_COMP_StateTypeDef; +/** + * @} + */ + +/** @defgroup COMP_handle COMP handler + * @{ + */ +/** + * @brief COMP Handle Structure definition + */ +typedef struct +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ +} COMP_HandleTypeDef; + +/** + * @} + */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_OutputPolarity COMP output polarity definitions + * @{ + */ +#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ +#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOLARITY /*!< COMP output on GPIO is inverted */ +#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ + ((POL) == COMP_OUTPUTPOL_INVERTED)) +/** + * @} + */ + + +/** @defgroup COMP_InvertingInput COMP inverting input definitions + * @{ + */ + +/* Inverting Input specific to COMP1 */ +#define COMP_INVERTINGINPUT_VREFINT ((uint32_t)0x00000000) /*!< VREFINT connected to comparator1 inverting input */ +#define COMP_INVERTINGINPUT_IO1 ((uint32_t)0x00000010) /*!< I/O1 connected to comparator inverting input (PA0) for COMP1 and (PA2) for COMP2*/ +#define COMP_INVERTINGINPUT_DAC1 ((uint32_t)0x00000020) /*!< DAC1_OUT (PA4) connected to comparator inverting input */ +#define COMP_INVERTINGINPUT_IO2 ((uint32_t)0x00000030) /*!< I/O2 (PA5) connected to comparator inverting input */ + +/* Inverting Input specific to COMP2 */ +#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000040) /*!< 1/4 VREFINT connected to comparator inverting input */ +#define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)0x00000050) /*!< 1/2 VREFINT connected to comparator inverting input */ +#define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)0x00000060) /*!< 3/4 VREFINT connected to comparator inverting input */ +#define COMP_INVERTINGINPUT_IO3 ((uint32_t)0x00000070) /*!< I/O3 (PB3) for COMP2 connected to comparator inverting input */ + + +#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_IO1) || \ + ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ + ((INPUT) == COMP_INVERTINGINPUT_IO2) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ + ((INPUT) == COMP_INVERTINGINPUT_IO3)) + +/** + * @} + */ + + +/** @defgroup COMP_NonInvertingInput COMP non inverting input definitions + * @{ + */ + +#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA3) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO2 ((uint32_t)0x00000100) /*!< I/O2 (PB4) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO3 ((uint32_t)0x00000200) /*!< I/O3 (PB5) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO4 ((uint32_t)0x00000300) /*!< I/O1 (PB6) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO5 ((uint32_t)0x00000400) /*!< I/O3 (PB7) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO6 ((uint32_t)0x00000500) /*!< I/O3 (PB7) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO7 ((uint32_t)0x00000600) /*!< I/O3 (PB7) connected to comparator non inverting input */ +#define COMP_NONINVERTINGINPUT_IO8 ((uint32_t)0x00000700) /*!< I/O3 (PB7) connected to comparator non inverting input */ + +#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO3) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO4) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO5) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO6) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO7) || \ + ((INPUT) == COMP_NONINVERTINGINPUT_IO8)) +/** + * @} + */ + + +/** @defgroup COMP_Mode COMP mode definition + * @{ + */ +/* Please refer to the electrical characteristics in the device datasheet for + the power consumption values */ +#define COMP_MODE_HIGHSPEED COMP_CSR_COMP2SPEED /*!< High Speed */ +#define COMP_MODE_LOWSPEED ((uint32_t)0x00000000) /*!< Low Speed */ + +#define IS_COMP_MODE(SPEED) (((SPEED) == COMP_MODE_HIGHSPEED) || \ + ((SPEED) == COMP_MODE_LOWSPEED)) +/** + * @} + */ + +/** @defgroup COMP_WindowMode COMP window mode definition + * @{ + */ +#define COMP_WINDOWMODE_DISABLE ((uint32_t)0x00000000) /*!< Window mode disabled (Plus input of comparator 1 connected to PA1)*/ +#define COMP_WINDOWMODE_ENABLE COMP_CSR_COMP1WM /*!< Window mode enabled: Plus input of comparator 1 shorted with Plus input of comparator 2 */ +#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \ + ((WINDOWMODE) == COMP_WINDOWMODE_ENABLE)) + +#if defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L082xx) || defined (STM32L083xx) +#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) ||\ + ((INSTANCE) == COMP2)) +#else +#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) ((INSTANCE) == COMP1) +#endif +/** + * @} + */ + +/** @defgroup COMP_LPTIMConnection COMP Low power timer connection definition + * @{ + */ +#define COMP_LPTIMCONNECTION_DISABLED ((uint32_t)0x00000000) /*!< COMPx signal is gated */ +#define COMP_LPTIMCONNECTION_ENABLED COMP_CSR_COMP1LPTIM1IN1 /*!< COMPx signal is connected to LPTIM */ +#define IS_COMP_LPTIMCONNECTION(LPTIMCONNECTION) (((LPTIMCONNECTION) == COMP_LPTIMCONNECTION_DISABLED) || \ + ((LPTIMCONNECTION) == COMP_LPTIMCONNECTION_ENABLED)) + +/** + * @} + */ + +/** @defgroup COMP_OutputLevel COMP output level definition + * @{ + */ +/* When output polarity is not inverted, comparator output is low when + the non-inverting input is at a lower voltage than the inverting input*/ +#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000) +/* When output polarity is not inverted, comparator output is high when + the non-inverting input is at a higher voltage than the inverting input */ +#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUTVALUE +/** + * @} + */ + +/* CSR register Mask */ +#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0xC0008779) + +#define COMP_LOCK_DISABLE ((uint32_t)0x00000000) +#define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK + +#define COMP_STATE_BIT_LOCK ((uint32_t)0x10) + +/** @defgroup COMP_TriggerMode COMP trigger mode definition + * @{ + */ +#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING)) +/** + * @} + */ + +/** @defgroup COMP_ExtiLineEvent COMP EXTI line definition + * @{ + */ + +#define COMP_EXTI_LINE_COMP2 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */ +#define COMP_EXTI_LINE_COMP1 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */ + + +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @brief Reset COMP handle state + * @param __HANDLE__: COMP handle. + * @retval None + */ + +/** @defgroup COMP_Exported_Macro COMP Exported Macro + * @{ + */ +/** + * @brief Reset the state machine associated to the handler + * @param __HANDLE__: COMP handle. + * @retval None. + */ + +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) + +/** + * @brief Enables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CSR |= (COMP_CSR_COMPxEN)) + +/** + * @brief Disables the specified comparator + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CSR &= ~(COMP_CSR_COMPxEN)) + +/** + * @brief Lock the specified comparator configuration + * @param __HANDLE__: COMP handle. + * @retval None. + */ +#define __HAL_COMP_LOCK(__HANDLE__) ((__HANDLE__)->Instance->CSR |= COMP_CSR_COMPxLOCK) + +/** @brief Checks whether the specified COMP flag is set or not. + * @param __HANDLE__: COMP handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg COMP_FLAG_LOCK: lock flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Enable the Exti Line rising edge trigger. + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the Exti Line rising edge trigger. + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the Exti Line falling edge trigger. + * @retval None. + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the Exti Line falling edge trigger. + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP1 EXTI line rising & falling edge trigger. + * @retval None. + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the COMP1 EXTI line rising & falling edge trigger. + * @retval None. + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Enable the COMP2 EXTI line rising & falling edge trigger. + * @retval None. + */ +#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the COMP2 EXTI line rising & falling edge trigger. + * @retval None. + */ +#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Get the specified EXTI line for a comparator instance + * @param __INSTANCE__: specifies the COMP instance. + * @retval value of @ref COMP_ExtiLineEvent + */ +#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \ + COMP_EXTI_LINE_COMP2) + +/** + * @brief Enable the COMP Exti Line. + * @retval None. + */ + +#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP Exti Line. + * @retval None. + */ + +#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Generate a software interrupt on the COMP EXTI line. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2) + + +/** + * @brief Enable the COMP EXTI Line in event mode + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Disable the COMP EXTI Line in event mode. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @retval The state of __FLAG__ (SET or RESET). + */ + +#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2) + +/** + * @brief Clear the COMP Exti flags. + * @retval None. + */ +#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1) +#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2) + + +/** + * @} + */ + +/* Include COMP HAL Extended module */ +#include "stm32l0xx_hal_comp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group2 I/O operation functions + * @{ + */ +/* I/O operation functions *****************************************************/ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); + +/* Callback in Interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0xx_HAL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |