diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3XX/stm32f30x_dbgmcu.c')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3XX/stm32f30x_dbgmcu.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3XX/stm32f30x_dbgmcu.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3XX/stm32f30x_dbgmcu.c new file mode 100644 index 0000000000..a460bc9ef8 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3XX/stm32f30x_dbgmcu.c @@ -0,0 +1,223 @@ +/** + ****************************************************************************** + * @file stm32f30x_dbgmcu.c + * @author MCD Application Team + * @version V1.1.0 + * @date 27-February-2014 + * @brief This file provides firmware functions to manage the following + * functionalities of the Debug MCU (DBGMCU) peripheral: + * + Device and Revision ID management + * + Peripherals Configuration + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f30x_dbgmcu.h" + +/** @addtogroup STM32F30x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + +/** @defgroup DBGMCU_Group1 Device and Revision ID management functions + * @brief Device and Revision ID management functions + * +@verbatim + ============================================================================== + ##### Device and Revision ID management functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @} + */ + +/** @defgroup DBGMCU_Group2 Peripherals Configuration functions + * @brief Peripherals Configuration + * +@verbatim + ============================================================================== + ##### Peripherals Configuration functions ##### + ============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Configures low power mode behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode. + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode. + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode. + * @param NewState: new state of the specified low power mode in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + +/** + * @brief Configures APB1 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB1 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted. + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted. + * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted. + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted. + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted. + * @arg DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter are stopped when + * Core is halted. + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted. + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted. + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when + * Core is halted. + * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when + * Core is halted. + * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted. + * @param NewState: new state of the specified APB1 peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB1PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB1FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB1FZ &= ~DBGMCU_Periph; + } +} + +/** + * @brief Configures APB2 peripheral behavior when the MCU is in Debug mode. + * @param DBGMCU_Periph: specifies the APB2 peripheral. + * This parameter can be any combination of the following values: + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted. + * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted. + * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted. + * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted. + * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted. + * @param NewState: new state of the specified APB2 peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_APB2PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->APB2FZ |= DBGMCU_Periph; + } + else + { + DBGMCU->APB2FZ &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |