diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_usart.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_usart.h | 588 |
1 files changed, 588 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_usart.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_usart.h new file mode 100644 index 0000000000..e9cb04f645 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_usart.h @@ -0,0 +1,588 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_usart.h + * @author MCD Application Team + * @version V1.1.0 + * @date 12-Sept-2014 + * @brief Header file of USART HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_USART_H +#define __STM32F3xx_HAL_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f3xx_hal_def.h" + +/** @addtogroup STM32F3xx_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USARTEx_Word_Length */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +}USART_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04 /*!< Error */ +}HAL_USART_StateTypeDef; + +/** + * @brief HAL USART Error Code structure definition + */ +typedef enum +{ + HAL_USART_ERROR_NONE = 0x00, /*!< No error */ + HAL_USART_ERROR_PE = 0x01, /*!< Parity error */ + HAL_USART_ERROR_NE = 0x02, /*!< Noise error */ + HAL_USART_ERROR_FE = 0x04, /*!< frame error */ + HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */ + HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */ +}HAL_USART_ErrorTypeDef; + +/** + * @brief USART clock sources definitions + */ +typedef enum +{ + USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ + USART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ + USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ + USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ + USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ + USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */ +}USART_ClockSourceTypeDef; + + +/** + * @brief USART handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< USART communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< USART Tx Transfer size */ + + uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< USART Rx Transfer size */ + + uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ + + uint16_t Mask; /*!< USART Rx RDR register mask */ + + DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_USART_StateTypeDef State; /*!< USART communication state */ + + HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */ + +}USART_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_1 ((uint32_t)0x0000) +#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) +#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) +#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \ + ((STOPBITS) == USART_STOPBITS_0_5) || \ + ((STOPBITS) == USART_STOPBITS_1_5) || \ + ((STOPBITS) == USART_STOPBITS_2)) +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE ((uint32_t)0x0000) +#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \ + ((PARITY) == USART_PARITY_EVEN) || \ + ((PARITY) == USART_PARITY_ODD)) +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX ((uint32_t)USART_CR1_RE) +#define USART_MODE_TX ((uint32_t)USART_CR1_TE) +#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) +#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLED ((uint32_t)0x0000) +#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \ + ((CLOCK) == USART_CLOCK_ENABLED)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW ((uint32_t)0x0000) +#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) +#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH)) +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE ((uint32_t)0x0000) +#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) +#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE)) +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE ((uint32_t)0x0000) +#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \ + ((LASTBIT) == USART_LASTBIT_ENABLE)) +/** + * @} + */ + + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define USART_FLAG_REACK ((uint32_t)0x00400000) +#define USART_FLAG_TEACK ((uint32_t)0x00200000) +#define USART_FLAG_BUSY ((uint32_t)0x00010000) +#define USART_FLAG_CTS ((uint32_t)0x00000400) +#define USART_FLAG_CTSIF ((uint32_t)0x00000200) +#define USART_FLAG_LBDF ((uint32_t)0x00000100) +#define USART_FLAG_TXE ((uint32_t)0x00000080) +#define USART_FLAG_TC ((uint32_t)0x00000040) +#define USART_FLAG_RXNE ((uint32_t)0x00000020) +#define USART_FLAG_IDLE ((uint32_t)0x00000010) +#define USART_FLAG_ORE ((uint32_t)0x00000008) +#define USART_FLAG_NE ((uint32_t)0x00000004) +#define USART_FLAG_FE ((uint32_t)0x00000002) +#define USART_FLAG_PE ((uint32_t)0x00000001) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_ERR ((uint16_t)0x0060) + +#define USART_IT_ORE ((uint16_t)0x0300) +#define USART_IT_NE ((uint16_t)0x0200) +#define USART_IT_FE ((uint16_t)0x0100) +/** + * @} + */ + +/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags + * @{ + */ +#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +/** + * @} + */ + +/** @defgroup USART_Request_Parameters USART Request Parameters + * @{ + */ +#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \ + ((PARAM) == USART_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/** @defgroup USART_Interruption_Mask USART interruptions flag mask + * @{ + */ +#define USART_IT_MASK ((uint16_t)0x001F) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + +/** @brief Reset USART handle state + * @param __HANDLE__: USART handle. + * @retval None + */ +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) + + +/** @brief Checks whether the specified USART flag is set or not. + * @param __HANDLE__: specifies the USART Handle + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_REACK: Receive enable ackowledge flag + * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag + * @arg USART_FLAG_BUSY: Busy flag + * @arg USART_FLAG_CTS: CTS Change flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enables the specified USART interrupt. + * @param __HANDLE__: specifies the USART Handle + * @param __INTERRUPT__: specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Disables the specified USART interrupt. + * @param __HANDLE__: specifies the USART Handle. + * @param __INTERRUPT__: specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK)))) + + +/** @brief Checks whether the specified USART interrupt has occurred or not. + * @param __HANDLE__: specifies the USART Handle + * @param __IT__: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) + +/** @brief Checks whether the specified USART interrupt source is enabled. + * @param __HANDLE__: specifies the USART Handle. + * @param __IT__: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \ + (((uint16_t)(__IT__)) & USART_IT_MASK))) + + +/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__: specifies the USART Handle. + * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg USART_CLEAR_PEF: Parity Error Clear Flag + * @arg USART_CLEAR_FEF: Framing Error Clear Flag + * @arg USART_CLEAR_NEF: Noise detected Clear Flag + * @arg USART_CLEAR_OREF: OverRun Error Clear Flag + * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag + * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag + * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific USART request flag. + * @param __HANDLE__: specifies the USART Handle. + * @param __REQ__: specifies the request flag to set + * This parameter can be one of the following values: + * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request + * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request + * + * @retval None + */ +#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable USART + * @param __HANDLE__: specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable USART + * @param __HANDLE__: specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + + +/** @brief Check USART Baud rate + * @param BAUDRATE: Baudrate specified by the user + * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval Test result (TRUE or FALSE) + */ +#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001) + +/** + * @} + */ + +/* Include USART HAL Extended module */ +#include "stm32f3xx_hal_usart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart); +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 Input and Output operation functions + * @brief USART Transmit/Receive functions + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group3 Peripheral Control functions + * @brief USART control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_USART_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |