diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_i2s_ex.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_i2s_ex.h | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_i2s_ex.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_i2s_ex.h new file mode 100644 index 0000000000..d5ec08f95e --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_i2s_ex.h @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_i2s_ex.h + * @author MCD Application Team + * @version V1.1.0 + * @date 12-Sept-2014 + * @brief Header file of I2S HAL Extended module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_I2S_EX_H +#define __STM32F3xx_HAL_I2S_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \ + defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \ + defined(STM32F373xC) || defined(STM32F378xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f3xx_hal_def.h" + +/** @addtogroup STM32F3xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2SEx I2S Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup I2SEx_Exported_Macros I2S Extended Exported Macros + * @{ + */ +#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) +#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE)) + +/** @brief Enable or disable the specified I2SExt peripheral. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE) +#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE) + +/** @brief Enable or disable the specified I2SExt interrupts. + * @param __HANDLE__: specifies the I2S Handle. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__)) +#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__)) + +/** @brief Checks if the specified I2SExt interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__: specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2SExt flag is set or not. + * @param __HANDLE__: specifies the I2S Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2SExt OVR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{(I2SxEXT((__HANDLE__)->Instance)->DR;\ + (I2SxEXT((__HANDLE__)->Instance)->SR;}while(0) +/** @brief Clears the I2SExt UDR pending flag. + * @param __HANDLE__: specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__)(I2SxEXT((__HANDLE__)->Instance)->SR) +#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx */ + /** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions + * @{ + */ + +#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) +/** @addtogroup I2SEx_Exported_Functions_Group1 Extended features functions + * @{ + */ + +/* Extended features functions ************************************************/ + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); +/** + * @} + */ +#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S I2S HAL module driver + * @{ + */ + +/** @addtogroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ +#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \ + defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) +/** @addtogroup I2S_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2S_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxRxCpltCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ +#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx */ + +/** @addtogroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */ + /* STM32F302xC || STM32F303xC || STM32F358xx || */ + /* STM32F301x8 || STM32F302x8 || STM32F318xx || */ + /* STM32F373xC || STM32F378xx */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F3xx_HAL_I2S_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |