diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_comp.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_comp.h | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_comp.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_comp.h new file mode 100644 index 0000000000..9edfb0fea9 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F3/stm32f3xx_hal_comp.h @@ -0,0 +1,275 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_comp.h + * @author MCD Application Team + * @version V1.1.0 + * @date 12-Sept-2014 + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_COMP_H +#define __STM32F3xx_HAL_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f3xx_hal_def.h" + +/** @addtogroup STM32F3xx_HAL_Driver + * @{ + */ + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ +/** + * @brief COMP Init structure definition + */ + +typedef struct +{ + + uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. + This parameter can be a value of @ref COMPEx_InvertingInput */ + + uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. + This parameter can be a value of @ref COMPEx_NonInvertingInput + Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */ + + uint32_t Output; /*!< Selects the output redirection of the comparator. + This parameter can be a value of @ref COMPEx_Output */ + + uint32_t OutputPol; /*!< Selects the output polarity of the comparator. + This parameter can be a value of @ref COMP_OutputPolarity */ + + uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. + This parameter can be a value of @ref COMPEx_Hysteresis + Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */ + + uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator. + This parameter can be a value of @ref COMPEx_BlankingSrce + Note: Not available on STM32F373xB/C and STM32F378xx devices */ + + uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator + to adjust the speed/consumption. + This parameter can be a value of @ref COMPEx_Mode + Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */ + + uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2, 4 or 6 if available). + This parameter can be a value of @ref COMPEx_WindowMode */ + + uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). + This parameter can be a value of @ref COMP_TriggerMode */ + +}COMP_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ + HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ +}HAL_COMP_StateTypeDef; + + +/** + * @brief PPP Handle Structure definition + */ +typedef struct +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ + +}COMP_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_OutputPolarity COMP Output Polarity + * @{ + */ +#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ +#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */ +#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ + ((POL) == COMP_OUTPUTPOL_INVERTED)) +/** + * @} + */ + +/** @defgroup COMP_OutputLevel COMP Output Level + * @{ + */ +/* When output polarity is not inverted, comparator output is low when + the non-inverting input is at a lower voltage than the inverting input*/ +#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000) +/* When output polarity is not inverted, comparator output is high when + the non-inverting input is at a higher voltage than the inverting input */ +#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT +/** + * @} + */ + +/** @defgroup COMP_TriggerMode COMP Trigger Mode + * @{ + */ +#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ + ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING)) +/** + * @} + */ + +#define COMP_LOCK_DISABLE ((uint32_t)0x00000000) +#define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK + +#define COMP_STATE_BIT_LOCK ((uint32_t)0x10) + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup COMP_Exported_Macros COMP Exported Macros + * @{ + */ + +/** @brief Reset COMP handle state + * @param __HANDLE__: COMP handle. + * @retval None + */ +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) +/** + * @} + */ + +/* Include COMP HAL Extended module */ +#include "stm32f3xx_hal_comp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @addtogroup COMP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @addtogroup COMP_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); + +/* Callback in Interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_COMP_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |