diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_rtc.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_rtc.h | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_rtc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_rtc.h new file mode 100644 index 0000000000..49a44fa159 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_hal_rtc.h @@ -0,0 +1,570 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_rtc.h + * @author MCD Application Team + * @version V1.0.0 + * @date 15-December-2014 + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_RTC_H +#define __STM32F1xx_HAL_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/** @addtogroup RTC_Private_Macros + * @{ + */ + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) (((PREDIV) <= (uint32_t)0xFFFFF) || ((PREDIV) == RTC_AUTO_1_SECOND)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59) +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) +#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12)) +#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31)) +#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A) +#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUTSOURCE_NONE) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_CALIBCLOCK) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_ALARM) || \ + ((__OUTPUT__) == RTC_OUTPUTSOURCE_SECOND)) + + +/** + * @} + */ + +/** @addtogroup RTC_Private_Constants + * @{ + */ +/** @defgroup RTC_Timeout_Value Default Timeout Value + * @{ + */ +#define RTC_TIMEOUT_VALUE 1000 +/** + * @} + */ + +/** @defgroup RTC_EXTI_Line_Event RTC EXTI Line event + * @{ + */ +#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +/** + * @} + */ + + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + +}RTC_TimeTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t Alarm; /*!< Specifies the alarm ID (only 1 alarm ID for STM32F1). + This parameter can be a value of @ref RTC_Alarms_Definitions */ +}RTC_AlarmTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */ + +}HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF or RTC_AUTO_1_SECOND + If RTC_AUTO_1_SECOND is selected, AsynchPrediv will be set automatically to get 1sec timebase */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC Tamper pin. + This parameter can be a value of @ref RTC_output_source_to_output_on_the_Tamper_pin */ + +}RTC_InitTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay (not necessary for HAL_RTC_SetDate). + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +}RTC_DateTypeDef; + +/** + * @brief Time Handle Structure definition + */ +typedef struct +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + RTC_DateTypeDef DateToUpdate; /*!< Current date set by user and updated automatically */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +}RTC_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Automatic_Prediv_1_Second Automatic calculation of prediv for 1sec timebase + * @{ + */ +#define RTC_AUTO_1_SECOND ((uint32_t)0xFFFFFFFF) + +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format + * @{ + */ +#define RTC_FORMAT_BIN ((uint32_t)0x000000000) +#define RTC_FORMAT_BCD ((uint32_t)0x000000001) + +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions Month Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) +#define RTC_MONTH_MARCH ((uint8_t)0x03) +#define RTC_MONTH_APRIL ((uint8_t)0x04) +#define RTC_MONTH_MAY ((uint8_t)0x05) +#define RTC_MONTH_JUNE ((uint8_t)0x06) +#define RTC_MONTH_JULY ((uint8_t)0x07) +#define RTC_MONTH_AUGUST ((uint8_t)0x08) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x00) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions Alarms Definitions + * @{ + */ +#define RTC_ALARM_A 0 /*!< Specify alarm ID (mainly for legacy purposes) */ + +/** + * @} + */ + + +/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin Output source to output on the Tamper pin + * @{ + */ + +#define RTC_OUTPUTSOURCE_NONE ((uint32_t)0x00000000) /*!< No output on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_CALIBCLOCK BKP_RTCCR_CCO /*!< RTC clock with a frequency divided by 64 on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_ALARM BKP_RTCCR_ASOE /*!< Alarm pulse signal on the TAMPER pin */ +#define RTC_OUTPUTSOURCE_SECOND (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Second pulse signal on the TAMPER pin */ + +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions Interrupts Definitions + * @{ + */ +#define RTC_IT_OW RTC_CRH_OWIE /*!< Overflow interrupt */ +#define RTC_IT_ALRA RTC_CRH_ALRIE /*!< Alarm interrupt */ +#define RTC_IT_SEC RTC_CRH_SECIE /*!< Second interrupt */ +#define RTC_IT_TAMP1 BKP_CSR_TPIE /*!< TAMPER Pin interrupt enable */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions Flags Definitions + * @{ + */ +#define RTC_FLAG_RTOFF RTC_CRL_RTOFF /*!< RTC Operation OFF flag */ +#define RTC_FLAG_RSF RTC_CRL_RSF /*!< Registers Synchronized flag */ +#define RTC_FLAG_OW RTC_CRL_OWF /*!< Overflow flag */ +#define RTC_FLAG_ALRAF RTC_CRL_ALRF /*!< Alarm flag */ +#define RTC_FLAG_SEC RTC_CRL_SECF /*!< Second flag */ +#define RTC_FLAG_TAMP1F BKP_CSR_TEF /*!< Tamper Interrupt Flag */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_Exported_macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__: RTC handle. + * @retval None + */ +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__: specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be checked + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET) + +/** + * @brief Get the selected RTC Alarm's flag status. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__: specifies the RTC handle. + * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CRL) & (__INTERRUPT__)) != RESET)? SET : RESET) + +/** + * @brief Clear the RTC Alarm's pending flags. + * @param __HANDLE__: specifies the RTC handle. + * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__) + +/** + * @brief Enable interrupt on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable interrupt on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Enable event on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable event on ALARM Exti Line 17. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief ALARM EXTI line configuration: set falling edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief Disable the ALARM Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) + + +/** + * @brief ALARM EXTI line configuration: set rising edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief Disable the ALARM Extended Interrupt Rising Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) + +/** + * @brief ALARM EXTI line configuration: set rising & falling edge trigger. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); + +/** + * @brief Disable the ALARM Extended Interrupt Rising & Falling Trigger. + * This parameter can be: + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()(); + +/** + * @brief Check whether the specified ALARM EXTI interrupt flag is set or not. + * @retval EXTI ALARM Line Status. + */ +#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & (RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Clear the ALARM EXTI flag. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = (RTC_EXTI_LINE_ALARM_EVENT)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None. + */ +#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RTC_EXTI_LINE_ALARM_EVENT) +/** + * @} + */ + +/* Include RTC HAL Extension module */ +#include "stm32f1xx_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_Exported_Functions + * @{ + */ + + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* RTC Time and Date functions ************************************************/ +/** @addtogroup RTC_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/* RTC Alarm functions ********************************************************/ +/** @addtogroup RTC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup RTC_Exported_Functions_Group4 + * @{ + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup RTC_Exported_Functions_Group5 + * @{ + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_RTC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |