diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c')
-rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c | 695 |
1 files changed, 695 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c new file mode 100644 index 0000000000..88e46e7778 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_comp.c @@ -0,0 +1,695 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_comp.c + * @author MCD Application Team + * @version V1.2.0 + * @date 11-December-2014 + * @brief COMP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the COMP peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim +================================================================================ + ##### COMP Peripheral features ##### +================================================================================ + + [..] + The STM32F0xx device family integrates up to 2 analog comparators COMP1 and COMP2: + (#) The non inverting input and inverting input can be set to GPIO pins + as shown in table1. COMP Inputs below. + + (#) The COMP output is available using HAL_COMP_GetOutputLevel() + and can be set on GPIO pins. Refer to table 2. COMP Outputs below. + + (#) The COMP output can be redirected to embedded timers (TIM1, TIM2 and TIM3) + Refer to table 3. COMP Outputs redirection to embedded timers below. + + (#) The comparators COMP1 and COMP2 can be combined in window mode. + + (#) The comparators have interrupt capability with wake-up + from Sleep and Stop modes (through the EXTI controller): + (++) COMP1 is internally connected to EXTI Line 21 + (++) COMP2 is internally connected to EXTI Line 22 + From the corresponding IRQ handler, the right interrupt source can be retrieved with the + macro __HAL_COMP_EXTI_GET_FLAG(). Possible values are: + (++) COMP_EXTI_LINE_COMP1_EVENT + (++) COMP_EXTI_LINE_COMP2_EVENT + + +[..] Table 1. COMP Inputs for the STM32F05x, STM32F07x and STM32F09x devices + +--------------------------------------------------+ + | | | COMP1 | COMP2 | + |-----------------|----------------|---------------| + | | 1/4 VREFINT | OK | OK | + | | 1/2 VREFINT | OK | OK | + | | 3/4 VREFINT | OK | OK | + | Inverting Input | VREFINT | OK | OK | + | | DAC1 OUT (PA4) | OK | OK | + | | DAC2 OUT (PA5) | OK | OK | + | | IO1 | PA0 | PA2 | + |-----------------|----------------|-------|-------| + | Non Inverting | | PA1 | PA3 | + | Input | | | | + +--------------------------------------------------+ + + [..] Table 2. COMP Outputs for the STM32F05x, STM32F07x and STM32F09x devices + +---------------+ + | COMP1 | COMP2 | + |-------|-------| + | PA0 | PA2 | + | PA6 | PA7 | + | PA11 | PA12 | + +---------------+ + + [..] Table 3. COMP Outputs redirection to embedded timers for the STM32F05x, STM32F07x and STM32F09x devices + +---------------------------------+ + | COMP1 | COMP2 | + |----------------|----------------| + | TIM1 BKIN | TIM1 BKIN | + | | | + | TIM1 OCREFCLR | TIM1 OCREFCLR | + | | | + | TIM1 IC1 | TIM1 IC1 | + | | | + | TIM2 IC4 | TIM2 IC4 | + | | | + | TIM2 OCREFCLR | TIM2 OCREFCLR | + | | | + | TIM3 IC1 | TIM3 IC1 | + | | | + | TIM3 OCREFCLR | TIM3 OCREFCLR | + +---------------------------------+ + + ##### How to use this driver ##### +================================================================================ + [..] + This driver provides functions to configure and program the Comparators of STM32F05x, STM32F07x and STM32F09x devices. + + To use the comparator, perform the following steps: + + (#) Fill in the HAL_COMP_MspInit() to + (++) Configure the comparator input in analog mode using HAL_GPIO_Init() + (++) Configure the comparator output in alternate function mode using HAL_GPIO_Init() to map the comparator + output to the GPIO pin + (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and + selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator + interrupt vector using HAL_NVIC_EnableIRQ() function. + + (#) Configure the comparator using HAL_COMP_Init() function: + (++) Select the inverting input + (++) Select the non inverting input + (++) Select the output polarity + (++) Select the output redirection + (++) Select the hysteresis level + (++) Select the power mode + (++) Select the event/interrupt mode + + (#) Enable the comparator using HAL_COMP_Start() function or HAL_COMP_Start_IT() function for interrupt mode + + (#) Read the comparator output level with HAL_COMP_GetOutputLevel() + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal.h" + +#ifdef HAL_COMP_MODULE_ENABLED + +#if defined(STM32F051x8) || defined(STM32F058xx) || \ + defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \ + defined(STM32F091xC) || defined (STM32F098xx) + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @defgroup COMP COMP HAL Module Driver + * @brief COMP HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup COMP_Private_Constants COMP Private Constants + * @{ + */ +/* CSR register reset value */ +#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000) +/* CSR register masks */ +#define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF) +#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE) +/* CSR COMPx non inverting input mask */ +#define COMP_CSR_COMPxNONINSEL_MASK ((uint16_t)COMP_CSR_COMP1SW1) +/* CSR COMP2 shift */ +#define COMP_CSR_COMP1_SHIFT 0U +#define COMP_CSR_COMP2_SHIFT 16U +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions to initialize and de-initialize comparators + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the COMP according to the specified + * parameters in the COMP_InitTypeDef and create the associated handle. + * @note If the selected comparator is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + assert_param(IS_COMP_INVERTINGINPUT(hcomp->Init.InvertingInput)); + assert_param(IS_COMP_NONINVERTINGINPUT(hcomp->Init.NonInvertingInput)); + assert_param(IS_COMP_OUTPUT(hcomp->Init.Output)); + assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol)); + assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis)); + assert_param(IS_COMP_MODE(hcomp->Init.Mode)); + + if(hcomp->Init.NonInvertingInput == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED) + { + assert_param(IS_COMP_DAC1SWITCH_INSTANCE(hcomp->Instance)); + } + + if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED) + { + assert_param(IS_COMP_WINDOWMODE_INSTANCE(hcomp->Instance)); + } + + if(hcomp->State == HAL_COMP_STATE_RESET) + { + /* Init SYSCFG and the low level hardware to access comparators */ + __SYSCFG_CLK_ENABLE(); + + HAL_COMP_MspInit(hcomp); + } + + /* Set COMP parameters */ + /* Set COMPxINSEL bits according to hcomp->Init.InvertingInput value */ + /* Set COMPxOUTSEL bits according to hcomp->Init.Output value */ + /* Set COMPxPOL bit according to hcomp->Init.OutputPol value */ + /* Set COMPxHYST bits according to hcomp->Init.Hysteresis value */ + /* Set COMPxMODE bits according to hcomp->Init.Mode value */ + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + MODIFY_REG(COMP->CSR, + (uint32_t)(COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \ + COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \ + COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, + (hcomp->Init.InvertingInput | \ + hcomp->Init.NonInvertingInput | \ + hcomp->Init.Output | \ + hcomp->Init.OutputPol | \ + hcomp->Init.Hysteresis | \ + hcomp->Init.Mode) << regshift); + + if(hcomp->Init.WindowMode != COMP_WINDOWMODE_DISABLED) + { + COMP->CSR |= COMP_CSR_WNDWEN; + } + + /* Initialize the COMP state*/ + if(hcomp->State == HAL_COMP_STATE_RESET) + { + hcomp->State = HAL_COMP_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitializes the COMP peripheral + * @note Deinitialization can't be performed if the COMP configuration is locked. + * To unlock the configuration, perform a system reset. + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set COMP_CSR register to reset value for the corresponding COMP instance */ + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + MODIFY_REG(COMP->CSR, + COMP_CSR_RESET_PARAMETERS_MASK << regshift, + COMP_CSR_RESET_VALUE << regshift); + + /* DeInit the low level hardware: SYSCFG, GPIO, CLOCK and NVIC */ + HAL_COMP_MspDeInit(hcomp); + + hcomp->State = HAL_COMP_STATE_RESET; + } + + return status; +} + +/** + * @brief Initializes the COMP MSP. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_COMP_MspInit could be implenetd in the user file + */ +} + +/** + * @brief DeInitializes COMP MSP. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_COMP_MspDeInit could be implenetd in the user file + */ +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group2 I/O operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the COMP data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->State == HAL_COMP_STATE_READY) + { + /* Enable the selected comparator */ + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); + + hcomp->State = HAL_COMP_STATE_BUSY; + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Stop the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->State == HAL_COMP_STATE_BUSY) + { + /* Disable the selected comparator */ + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); + + hcomp->State = HAL_COMP_STATE_READY; + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Enables the interrupt and starts the comparator + * @param hcomp: COMP handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t extiline = 0; + + /* Check the parameter */ + assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode)); + + status = HAL_COMP_Start(hcomp); + if(status == HAL_OK) + { + /* Check the Exti Line output configuration */ + extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance); + /* Configure the rising edge */ + if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_RISING) != RESET) + { + __HAL_COMP_EXTI_RISING_IT_ENABLE(extiline); + } + else + { + __HAL_COMP_EXTI_RISING_IT_DISABLE(extiline); + } + /* Configure the falling edge */ + if((hcomp->Init.TriggerMode & COMP_TRIGGERMODE_IT_FALLING) != RESET) + { + __HAL_COMP_EXTI_FALLING_IT_ENABLE(extiline); + } + else + { + __HAL_COMP_EXTI_FALLING_IT_DISABLE(extiline); + } + /* Enable Exti interrupt mode */ + __HAL_COMP_EXTI_ENABLE_IT(extiline); + /* Clear COMP Exti pending bit */ + __HAL_COMP_EXTI_CLEAR_FLAG(extiline); + } + + return status; +} + +/** + * @brief Disable the interrupt and Stop the comparator + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the Exti Line interrupt mode */ + __HAL_COMP_EXTI_DISABLE_IT(__HAL_COMP_GET_EXTI_LINE(hcomp->Instance)); + + status = HAL_COMP_Stop(hcomp); + + return status; +} + +/** + * @brief Comparator IRQ Handler + * @param hcomp: COMP handle + * @retval HAL status + */ +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp) +{ + uint32_t extiline = __HAL_COMP_GET_EXTI_LINE(hcomp->Instance); + + /* Check COMP Exti flag */ + if(__HAL_COMP_EXTI_GET_FLAG(extiline) != RESET) + { + /* Clear COMP Exti pending bit */ + __HAL_COMP_EXTI_CLEAR_FLAG(extiline); + + /* COMP trigger user callback */ + HAL_COMP_TriggerCallback(hcomp); + } +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the COMP data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected comparator configuration. + * @param hcomp: COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the COMP handle allocation and lock status */ + if((hcomp == NULL) || ((hcomp->State & COMP_STATE_BIT_LOCK) != RESET)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set lock flag */ + hcomp->State |= COMP_STATE_BIT_LOCK; + + /* Set the lock bit corresponding to selected comparator */ + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); + } + + return status; +} + +/** + * @brief Return the output level (high or low) of the selected comparator. + * The output level depends on the selected polarity. + * If the polarity is not inverted: + * - Comparator output is low when the non-inverting input is at a lower + * voltage than the inverting input + * - Comparator output is high when the non-inverting input is at a higher + * voltage than the inverting input + * If the polarity is inverted: + * - Comparator output is high when the non-inverting input is at a lower + * voltage than the inverting input + * - Comparator output is low when the non-inverting input is at a higher + * voltage than the inverting input + * @param hcomp: COMP handle + * @retval Returns the selected comparator output level: COMP_OUTPUTLEVEL_LOW or COMP_OUTPUTLEVEL_HIGH. + * + */ +uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp) +{ + uint32_t level=0; + uint32_t regshift = COMP_CSR_COMP1_SHIFT; + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if(hcomp->Instance == COMP2) + { + regshift = COMP_CSR_COMP2_SHIFT; + } + level = READ_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxOUT << regshift); + + if(level != 0) + { + return(COMP_OUTPUTLEVEL_HIGH); + } + return(COMP_OUTPUTLEVEL_LOW); +} + +/** + * @brief Comparator callback. + * @param hcomp: COMP handle + * @retval None + */ +__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_TriggerCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the COMP state + * @param hcomp : COMP handle + * @retval HAL state + */ +uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp) +{ + /* Check the COMP handle allocation */ + if(hcomp == NULL) + { + return HAL_COMP_STATE_RESET; + } + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return hcomp->State; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F051x8 || STM32F058xx || */ + /* STM32F071xB || STM32F072xB || STM32F078xx || */ + /* STM32F091xC || defined (STM32F098xx) */ + +#endif /* HAL_COMP_MODULE_ENABLED */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |