diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_adc.h')
| -rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_adc.h | 951 |
1 files changed, 951 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_adc.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_adc.h new file mode 100644 index 0000000000..ee6dd66a49 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_adc.h @@ -0,0 +1,951 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_adc.h + * @author MCD Application Team + * @version V1.2.0 + * @date 11-December-2014 + * @brief Header file containing functions prototypes of ADC HAL library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_ADC_H +#define __STM32F0xx_HAL_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief Structure definition of ADC initialization and regular group + * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler') + * - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from ADC dedicated HSI RC oscillator 14MHz) and clock prescaler. + This parameter can be a value of @ref ADC_ClockPrescaler + Note: In case of usage of the ADC dedicated HSI RC oscillator, it must be preliminarily enabled at RCC top level. + Note: This parameter can be modified only if the ADC is disabled */ + uint32_t Resolution; /*!< Configures the ADC resolution. + This parameter can be a value of @ref ADC_Resolution */ + uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_Data_align */ + uint32_t ScanConvMode; /*!< Configures the sequencer of regular group. + This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts. + Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices): + If only 1 channel is set: Conversion is performed in single mode. + If several channels are set: Conversions are performed in sequence mode (ranks defined by each channel number: channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Scan direction can be set to forward (from channel 0 to channel 18) or backward (from channel 18 to channel 0). + This parameter can be a value of @ref ADC_Scan_mode */ + uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence. + This parameter can be a value of @ref ADC_EOCSelection. */ + uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous + conversion (for regular group) or previous sequence (for injected group) has been treated by user software. + This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications. + This parameter can be set to ENABLE or DISABLE. + Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer. + Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed + and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */ + uint32_t LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling). + This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait'). + This parameter can be set to ENABLE or DISABLE. + Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */ + uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group, + after the selected trigger occurred (software start or external trigger). + This parameter can be set to ENABLE or DISABLE. */ + uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded. + This parameter can be set to ENABLE or DISABLE + Note: Number of discontinuous ranks increment is fixed to one-by-one. */ + uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. + If set to ADC_SOFTWARE_START, external triggers are disabled. + This parameter can be a value of @ref ADC_External_trigger_source_Regular */ + uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group. + If trigger is set to ADC_SOFTWARE_START, this parameter is discarded. + This parameter can be a value of @ref ADC_External_trigger_edge_Regular */ + uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached) + or in Continuous mode (DMA transfer unlimited, whatever number of conversions). + Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached. + This parameter can be set to ENABLE or DISABLE. */ + uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten + This parameter has an effect on regular group only, including in DMA mode. + This parameter can be a value of @ref ADC_Overrun */ +}ADC_InitTypeDef; + +/** + * @brief Structure definition of ADC channel for regular group + * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled or enabled without conversion on going on regular group. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group. + This parameter can be a value of @ref ADC_channels + Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */ + uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer. + On STM32F0 devices, rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...). + Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer. + This parameter can be a value of @ref ADC_rank */ + uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles + Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_sampling_times + Caution: this setting impacts the entire regular group. Therefore, call of HAL_ADC_ConfigChannel() to configure a channel can impact the configuration of other channels previously set. + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */ +}ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition of ADC analog watchdog + * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state. + * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular group. + */ +typedef struct +{ + uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all/none channels. + This parameter can be a value of @ref ADC_analog_watchdog_mode. */ + uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog. + This parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored. + This parameter can be a value of @ref ADC_channels. */ + uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode. + This parameter can be set to ENABLE or DISABLE */ + uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ + uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */ +}ADC_AnalogWDGConfTypeDef; + +/** + * @brief HAL ADC state machine: ADC States structure definition + */ +typedef enum +{ + HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */ + HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */ + HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ + HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */ + HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */ + HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */ + HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */ + HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */ + HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */ + HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */ + HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */ + HAL_ADC_STATE_AWD = 0x06, /*!< ADC state analog watchdog */ + HAL_ADC_STATE_AWD2 = 0x07, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */ + HAL_ADC_STATE_AWD3 = 0x08, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */ +}HAL_ADC_StateTypeDef; + +/** + * @brief ADC handle Structure definition + */ +typedef struct +{ + ADC_TypeDef *Instance; /*!< Register base address */ + + ADC_InitTypeDef Init; /*!< ADC required parameters */ + + __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */ + + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + + HAL_LockTypeDef Lock; /*!< ADC locking object */ + + __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */ + + __IO uint32_t ErrorCode; /*!< ADC Error code */ +}ADC_HandleTypeDef; +/** + * @} + */ + + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ +#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking, + enable/disable, erroneous state */ +#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */ +#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */ + +/** + * @} + */ + +/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler + * @{ + */ +#define ADC_CLOCK_ASYNC ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated HSI */ + +#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */ +#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */ + +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 /* Obsolete naming, kept for compatibility with some other devices */ +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 /* Obsolete naming, kept for compatibility with some other devices */ + +#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC) || \ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \ + ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) ) + +/** + * @} + */ + +/** @defgroup ADC_Resolution ADC Resolution + * @{ + */ +#define ADC_RESOLUTION12b ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */ +#define ADC_RESOLUTION10b ((uint32_t)ADC_CFGR1_RES_0) /*!< ADC 10-bit resolution */ +#define ADC_RESOLUTION8b ((uint32_t)ADC_CFGR1_RES_1) /*!< ADC 8-bit resolution */ +#define ADC_RESOLUTION6b ((uint32_t)ADC_CFGR1_RES) /*!< ADC 6-bit resolution */ + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \ + ((RESOLUTION) == ADC_RESOLUTION10b) || \ + ((RESOLUTION) == ADC_RESOLUTION8b) || \ + ((RESOLUTION) == ADC_RESOLUTION6b) ) +/** + * @} + */ + +/** @defgroup ADC_Data_align ADC Data_align + * @{ + */ +#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000) +#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR1_ALIGN) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ + ((ALIGN) == ADC_DATAALIGN_LEFT) ) +/** + * @} + */ + +/** @defgroup ADC_Scan_mode ADC Scan mode + * @{ + */ +/* Note: Scan mode values must be compatible with other STM32 devices having */ +/* a configurable sequencer. */ +/* Scan direction setting values are defined by taking in account */ +/* already defined values for other STM32 devices: */ +/* ADC_SCAN_DISABLE ((uint32_t)0x00000000) */ +/* ADC_SCAN_ENABLE ((uint32_t)0x00000001) */ +/* Scan direction forward is considered as default setting equivalent */ +/* to scan enable. */ +/* Scan direction backward is considered as additional setting. */ +/* In case of migration from another STM32 device, the user will be */ +/* warned of change of setting choices with assert check. */ +#define ADC_SCAN_DIRECTION_FORWARD ((uint32_t)0x00000001) /*!< Scan direction forward: from channel 0 to channel 18 */ +#define ADC_SCAN_DIRECTION_BACKWARD ((uint32_t)0x00000002) /*!< Scan direction backward: from channel 18 to channel 0 */ + +#define ADC_SCAN_ENABLE ADC_SCAN_DIRECTION_FORWARD /* For compatibility with other STM32 devices */ + +#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DIRECTION_FORWARD) || \ + ((SCAN_MODE) == ADC_SCAN_DIRECTION_BACKWARD) ) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_edge_Regular ADC External trigger edge Regular + * @{ + */ +#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000) +#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR1_EXTEN_0) +#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR1_EXTEN_1) +#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR1_EXTEN) + +#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ + ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) ) +/** + * @} + */ + +/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular + * @{ + */ +/* List of external triggers with generic trigger name, sorted by trigger */ +/* name: */ + +/* External triggers of regular group for ADC1 */ +#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO +#define ADC_EXTERNALTRIGCONV_T1_CC4 ADC1_2_EXTERNALTRIG_T1_CC4 +#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO +#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO +#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO +#define ADC_SOFTWARE_START ((uint32_t)0x00000010) + +#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ + ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \ + ((REGTRIG) == ADC_SOFTWARE_START) ) +/** + * @} + */ + +/** @defgroup ADC_Internal_HAL_driver_Ext_trig_src_Regular ADC Internal HAL driver Ext trig src Regular + * @{ + */ + +/* List of external triggers of regular group for ADC1: */ +/* (used internally by HAL driver. To not use into HAL structure parameters) */ +#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)0x00000000) +#define ADC1_2_EXTERNALTRIG_T1_CC4 ((uint32_t)ADC_CFGR1_EXTSEL_0) +#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_1) +#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0)) +#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_2) + +/** + * @} + */ + +/** @defgroup ADC_EOCSelection ADC EOCSelection + * @{ + */ +#define EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC) +#define EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS) +#define EOC_SINGLE_SEQ_CONV ((uint32_t)(ADC_ISR_EOC | ADC_ISR_EOS)) /*!< reserved for future use */ + +#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == EOC_SINGLE_CONV) || \ + ((EOC_SELECTION) == EOC_SEQ_CONV) || \ + ((EOC_SELECTION) == EOC_SINGLE_SEQ_CONV) ) +/** + * @} + */ + +/** @defgroup ADC_Overrun ADC Overrun + * @{ + */ +#define OVR_DATA_OVERWRITTEN ((uint32_t)0x00000000) +#define OVR_DATA_PRESERVED ((uint32_t)0x00000001) + +#define IS_ADC_OVERRUN(OVR) (((OVR) == OVR_DATA_PRESERVED) || \ + ((OVR) == OVR_DATA_OVERWRITTEN) ) +/** + * @} + */ + +/** @defgroup ADC_channels ADC channels + * @{ + */ +/* Note: Depending on devices, some channels may not be available on package */ +/* pins. Refer to device datasheet for channels availability. */ +/* Note: Channels are used by bitfields for setting of channel selection */ +/* (register ADC_CHSELR) and used by number for setting of analog watchdog */ +/* channel (bits AWDCH in register ADC_CFGR1). */ +/* Channels are defined with decimal numbers and converted them to bitfields */ +/* when needed. */ +#define ADC_CHANNEL_0 ((uint32_t) 0x00000000) +#define ADC_CHANNEL_1 ((uint32_t) 0x00000001) +#define ADC_CHANNEL_2 ((uint32_t) 0x00000002) +#define ADC_CHANNEL_3 ((uint32_t) 0x00000003) +#define ADC_CHANNEL_4 ((uint32_t) 0x00000004) +#define ADC_CHANNEL_5 ((uint32_t) 0x00000005) +#define ADC_CHANNEL_6 ((uint32_t) 0x00000006) +#define ADC_CHANNEL_7 ((uint32_t) 0x00000007) +#define ADC_CHANNEL_8 ((uint32_t) 0x00000008) +#define ADC_CHANNEL_9 ((uint32_t) 0x00000009) +#define ADC_CHANNEL_10 ((uint32_t) 0x0000000A) +#define ADC_CHANNEL_11 ((uint32_t) 0x0000000B) +#define ADC_CHANNEL_12 ((uint32_t) 0x0000000C) +#define ADC_CHANNEL_13 ((uint32_t) 0x0000000D) +#define ADC_CHANNEL_14 ((uint32_t) 0x0000000E) +#define ADC_CHANNEL_15 ((uint32_t) 0x0000000F) +#define ADC_CHANNEL_16 ((uint32_t) 0x00000010) +#define ADC_CHANNEL_17 ((uint32_t) 0x00000011) +#define ADC_CHANNEL_18 ((uint32_t) 0x00000012) + +#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 +#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17 +#define ADC_CHANNEL_VBAT ADC_CHANNEL_18 + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \ + ((CHANNEL) == ADC_CHANNEL_1) || \ + ((CHANNEL) == ADC_CHANNEL_2) || \ + ((CHANNEL) == ADC_CHANNEL_3) || \ + ((CHANNEL) == ADC_CHANNEL_4) || \ + ((CHANNEL) == ADC_CHANNEL_5) || \ + ((CHANNEL) == ADC_CHANNEL_6) || \ + ((CHANNEL) == ADC_CHANNEL_7) || \ + ((CHANNEL) == ADC_CHANNEL_8) || \ + ((CHANNEL) == ADC_CHANNEL_9) || \ + ((CHANNEL) == ADC_CHANNEL_10) || \ + ((CHANNEL) == ADC_CHANNEL_11) || \ + ((CHANNEL) == ADC_CHANNEL_12) || \ + ((CHANNEL) == ADC_CHANNEL_13) || \ + ((CHANNEL) == ADC_CHANNEL_14) || \ + ((CHANNEL) == ADC_CHANNEL_15) || \ + ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \ + ((CHANNEL) == ADC_CHANNEL_VREFINT) || \ + ((CHANNEL) == ADC_CHANNEL_VBAT) ) +/** + * @} + */ + +/** @defgroup ADC_rank ADC rank + * @{ + */ +#define ADC_RANK_CHANNEL_NUMBER ((uint32_t)0x00001000) /*!< Enable the rank of the selected channels. Rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */ +#define ADC_RANK_NONE ((uint32_t)0x00001001) /*!< Disable the selected rank (selected channel) from sequencer */ + +#define IS_ADC_RANK(WATCHDOG) (((WATCHDOG) == ADC_RANK_CHANNEL_NUMBER) || \ + ((WATCHDOG) == ADC_RANK_NONE) ) +/** + * @} + */ + +/** @defgroup ADC_sampling_times ADC sampling times + * @{ + */ +#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */ +#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */ +#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */ +#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0)) /*!< Sampling time 28.5 ADC clock cycles */ +#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */ +#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0)) /*!< Sampling time 55.5 ADC clock cycles */ +#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1)) /*!< Sampling time 71.5 ADC clock cycles */ +#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR_SMP) /*!< Sampling time 239.5 ADC clock cycles */ + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \ + ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \ + ((TIME) == ADC_SAMPLETIME_239CYCLES_5) ) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode + * @{ + */ +#define ADC_ANALOGWATCHDOG_NONE ((uint32_t) 0x00000000) +#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN)) +#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR1_AWDEN) + + +#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) ) +/** + * @} + */ + +/** @defgroup ADC_Event_type ADC Event type + * @{ + */ +#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog 1 event */ +#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */ + +#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \ + ((EVENT) == OVR_EVENT) ) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition ADC interrupts definition + * @{ + */ +#define ADC_IT_AWD ADC_IER_AWDIE /*!< ADC Analog watchdog interrupt source */ +#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */ +#define ADC_IT_EOS ADC_IER_EOSEQIE /*!< ADC End of Regular sequence of Conversions interrupt source */ +#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of Sampling interrupt source */ +#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */ +/** + * @} + */ + +/** @defgroup ADC_flags_definition ADC flags definition + * @{ + */ +#define ADC_FLAG_AWD ADC_ISR_AWD /*!< ADC Analog watchdog flag */ +#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */ +#define ADC_FLAG_EOS ADC_ISR_EOSEQ /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */ +#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */ +#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */ + +#define ADC_FLAG_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC | \ + ADC_FLAG_EOSMP | ADC_FLAG_RDY ) + +/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */ +#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC) +/** + * @} + */ + +/** @defgroup ADC_range_verification ADC range verification + * in function of ADC resolution selected (12, 10, 8 or 6 bits) + * @{ + */ +#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \ + ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \ + (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \ + (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \ + (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))) ) +/** + * @} + */ + +/** @defgroup ADC_regular_rank_verification ADC regular rank verification + * @{ + */ +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16))) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ +/** @brief Reset ADC handle state + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET) + +/* Macro for internal HAL driver usage, and possibly can be used into code of */ +/* final user. */ + +/** + * @brief Verification of ADC state: enabled or disabled + * @param __HANDLE__: ADC handle + * @retval SET (ADC enabled) or RESET (ADC disabled) + */ +/* Note: If low power mode AutoPowerOff is enabled, power-on/off phases are */ +/* performed automatically by hardware and flag ADC_FLAG_RDY is not */ +/* set. */ +#define __HAL_ADC_IS_ENABLED(__HANDLE__) \ + (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \ + (((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) || \ + ((((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_AUTOFF) == ADC_CFGR1_AUTOFF) ) \ + ) ? SET : RESET) + +/** + * @brief Test if conversion trigger of regular group is software start + * or external trigger. + * @param __HANDLE__: ADC handle + * @retval SET (software start) or RESET (external trigger) + */ +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \ + (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == RESET) + +/** + * @brief Check if no conversion on going on regular group + * @param __HANDLE__: ADC handle + * @retval SET (conversion is on going) or RESET (no conversion is on going) + */ +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \ + (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \ + ) ? RESET : SET) + +/** + * @brief Returns resolution bits in CFGR1 register: RES[1:0]. + * Returned value is among parameters to @ref ADC_Resolution. + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_RES) + +/** + * @brief Returns ADC sample time bits in SMPR register: SMP[2:0]. + * Returned value is among parameters to @ref ADC_Resolution. + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_GET_SAMPLINGTIME(__HANDLE__) (((__HANDLE__)->Instance->SMPR) & ADC_SMPR_SMP) + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC interrupt source to check + * @retval State ofinterruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (( ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__) \ + )? SET : RESET \ + ) + +/** + * @brief Enable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) + +/** + * @brief Disable the ADC end of conversion interrupt. + * @param __HANDLE__: ADC handle + * @param __INTERRUPT__: ADC Interrupt + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) + +/** + * @brief Get the selected ADC's flag status. + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * @retval None + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the ADC's pending flags + * @param __HANDLE__: ADC handle + * @param __FLAG__: ADC flag + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__)) + +/** + * @brief Clear ADC error code (set it to error code: "no error") + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + + +/** + * @brief Configure the channel number into channel selection register + * @param _CHANNEL_: ADC Channel + * @retval None + */ +/* This function converts ADC channels from numbers (see defgroup ADC_channels) + to bitfields, to get the equivalence of CMSIS channels: + ADC_CHANNEL_0 ((uint32_t) ADC_CHSELR_CHSEL0) + ADC_CHANNEL_1 ((uint32_t) ADC_CHSELR_CHSEL1) + ADC_CHANNEL_2 ((uint32_t) ADC_CHSELR_CHSEL2) + ADC_CHANNEL_3 ((uint32_t) ADC_CHSELR_CHSEL3) + ADC_CHANNEL_4 ((uint32_t) ADC_CHSELR_CHSEL4) + ADC_CHANNEL_5 ((uint32_t) ADC_CHSELR_CHSEL5) + ADC_CHANNEL_6 ((uint32_t) ADC_CHSELR_CHSEL6) + ADC_CHANNEL_7 ((uint32_t) ADC_CHSELR_CHSEL7) + ADC_CHANNEL_8 ((uint32_t) ADC_CHSELR_CHSEL8) + ADC_CHANNEL_9 ((uint32_t) ADC_CHSELR_CHSEL9) + ADC_CHANNEL_10 ((uint32_t) ADC_CHSELR_CHSEL10) + ADC_CHANNEL_11 ((uint32_t) ADC_CHSELR_CHSEL11) + ADC_CHANNEL_12 ((uint32_t) ADC_CHSELR_CHSEL12) + ADC_CHANNEL_13 ((uint32_t) ADC_CHSELR_CHSEL13) + ADC_CHANNEL_14 ((uint32_t) ADC_CHSELR_CHSEL14) + ADC_CHANNEL_15 ((uint32_t) ADC_CHSELR_CHSEL15) + ADC_CHANNEL_16 ((uint32_t) ADC_CHSELR_CHSEL16) + ADC_CHANNEL_17 ((uint32_t) ADC_CHSELR_CHSEL17) + ADC_CHANNEL_18 ((uint32_t) ADC_CHSELR_CHSEL18) +*/ +#define __HAL_ADC_CHSELR_CHANNEL(_CHANNEL_) ( 1U << (_CHANNEL_)) + +/** + * @} + */ + +/** @defgroup ADC_Exported_Macro_internal_HAL_driver ADC Exported Macro internal HAL driver + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Set the Analog Watchdog 1 channel. + * @param _CHANNEL_: channel to be monitored by Analog Watchdog 1. + * @retval None + */ +#define __HAL_ADC_CFGR_AWDCH(_CHANNEL_) ((_CHANNEL_) << 26) + +/** + * @brief Enable ADC discontinuous conversion mode for regular group + * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode. + * @retval None + */ +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16) + +/** + * @brief Enable the ADC auto off mode. + * @param _AUTOOFF_: Auto off bit enable or disable. + * @retval None + */ +#define __HAL_ADC_CFGR1_AUTOOFF(_AUTOOFF_) ((_AUTOOFF_) << 15) + +/** + * @brief Enable the ADC auto delay mode. + * @param _AUTOWAIT_: Auto delay bit enable or disable. + * @retval None + */ +#define __HAL_ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) ((_AUTOWAIT_) << 14) + +/** + * @brief Enable ADC continuous conversion mode. + * @param _CONTINUOUS_MODE_: Continuous mode. + * @retval None + */ +#define __HAL_ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 13) + +/** + * @brief Enable ADC overrun mode. + * @param _OVERRUN_MODE_: Overrun mode. + * @retval Overun bit setting to be programmed into CFGR register + */ +/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */ +/* "OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it as the */ +/* default case to be compliant with other STM32 devices. */ +#define __HAL_ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \ + ( ( (_OVERRUN_MODE_) != (OVR_DATA_PRESERVED) \ + )? (ADC_CFGR1_OVRMOD) : (0x00000000) \ + ) + +/** + * @brief Enable ADC scan mode to convert multiple ranks with sequencer. + * @param _SCAN_MODE_: Scan conversion mode. + * @retval None + */ +#define __HAL_ADC_CFGR1_SCANDIR(_SCAN_MODE_) \ + ( ( (_SCAN_MODE_) == (ADC_SCAN_DIRECTION_BACKWARD) \ + )? (ADC_CFGR1_SCANDIR) : (0x00000000) \ + ) + +/** + * @brief Enable the ADC DMA continuous request. + * @param _DMACONTREQ_MODE_: DMA continuous request mode. + * @retval None + */ +#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1) + +/** + * @brief Configure the analog watchdog high threshold into register TR. + * @param _Threshold_: Threshold value + * @retval None + */ +#define __HAL_ADC_TRX_HIGHTHRESHOLD(_Threshold_) ((_Threshold_) << 16) + +/** + * @brief Enable the ADC peripheral + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN) + +/** + * @brief Verification of hardware constraints before ADC can be enabled + * @param __HANDLE__: ADC handle + * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled) + */ +#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \ + (( ( ((__HANDLE__)->Instance->CR) & \ + (ADC_CR_ADCAL | ADC_CR_ADSTP | \ + ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \ + ) == RESET \ + ) ? SET : RESET) + +/** + * @brief Disable the ADC peripheral + * @param __HANDLE__: ADC handle + * @retval None + */ +#define __HAL_ADC_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \ + __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \ + } while(0) + +/** + * @brief Verification of hardware constraints before ADC can be disabled + * @param __HANDLE__: ADC handle + * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled) + */ +#define __HAL_ADC_DISABLING_CONDITIONS(__HANDLE__) \ + (( ( ((__HANDLE__)->Instance->CR) & \ + (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \ + ) ? SET : RESET) + +/** + * @brief Shift the AWD threshold in function of the selected ADC resolution. + * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)) + * @param __HANDLE__: ADC handle + * @param _Threshold_: Value to be shifted + * @retval None + */ +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \ + ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3)*2)) + +/** + * @} + */ + +/* Include ADC HAL Extension module */ +#include "stm32f0xx_hal_adc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @{ + */ + + +/* Initialization and de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); +/** + * @} + */ + +/* IO operation functions *****************************************************/ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @{ + */ + + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/* Peripheral Control functions ***********************************************/ +/** @addtogroup ADC_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); +/** + * @} + */ + + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group4 + * @{ + */ +HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc); +uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F0xx_HAL_ADC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |