diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c')
-rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c new file mode 100644 index 0000000000..cb98405feb --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/system_nrf51.c @@ -0,0 +1,134 @@ +/* Copyright (c) 2013, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* NOTE: Template files (including this one) are application specific and therefore expected to + be copied into the application project folder prior to its use! */ + +#include <stdint.h> +#include <stdbool.h> +#include "nrf.h" +#include "system_nrf51.h" + +/*lint ++flb "Enter library region" */ + +#define __SYSTEM_CLOCK (16000000UL) /*!< nRF51 devices use a fixed System Clock Frequency of 16MHz */ + +static bool is_manual_peripheral_setup_needed(void); +static bool is_disabled_in_debug_needed(void); + + +#if defined ( __CC_ARM ) + uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK; +#elif defined ( __ICCARM__ ) + __root uint32_t SystemCoreClock = __SYSTEM_CLOCK; +#elif defined ( __GNUC__ ) + uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK; +#endif + +void SystemCoreClockUpdate(void) +{ + SystemCoreClock = __SYSTEM_CLOCK; +} + +void SystemInit(void) +{ + /* If desired, switch off the unused RAM to lower consumption by the use of RAMON register. + It can also be done in the application main() function. */ + + /* Prepare the peripherals for use as indicated by the PAN 26 "System: Manual setup is required + to enable the use of peripherals" found at Product Anomaly document for your device found at + https://www.nordicsemi.com/. The side effect of executing these instructions in the devices + that do not need it is that the new peripherals in the second generation devices (LPCOMP for + example) will not be available. */ + if (is_manual_peripheral_setup_needed()) + { + *(uint32_t volatile *)0x40000504 = 0xC007FFDF; + *(uint32_t volatile *)0x40006C18 = 0x00008000; + } + + /* Disable PROTENSET registers under debug, as indicated by PAN 59 "MPU: Reset value of DISABLEINDEBUG + register is incorrect" found at Product Anomaly document four your device found at + https://www.nordicsemi.com/. There is no side effect of using these instruction if not needed. */ + if (is_disabled_in_debug_needed()) + { + NRF_MPU->DISABLEINDEBUG = MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos; + } + + // Start the external 32khz crystal oscillator. + +#if defined(TARGET_DELTA_DFCM_NNN40) || defined(TARGET_HRM1017) + NRF_CLOCK->LFCLKSRC = (CLOCK_LFCLKSRC_SRC_RC << CLOCK_LFCLKSRC_SRC_Pos); +#else + NRF_CLOCK->LFCLKSRC = (CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos); +#endif + NRF_CLOCK->EVENTS_LFCLKSTARTED = 0; + NRF_CLOCK->TASKS_LFCLKSTART = 1; + + // Wait for the external oscillator to start up. + while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0) { + // Do nothing. + } +} + +static bool is_manual_peripheral_setup_needed(void) +{ + if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)) + { + if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x00) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0)) + { + return true; + } + if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x10) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0)) + { + return true; + } + if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0)) + { + return true; + } + } + + return false; +} + +static bool is_disabled_in_debug_needed(void) +{ + if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)) + { + if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0)) + { + return true; + } + } + + return false; +} + +/*lint --flb "Leave library region" */ |