1 files changed, 59 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/common/board.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/common/board.c
new file mode 100644
index 0000000000..9103236456
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/common/board.c
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "gpio_api.h"
+#include "wait_api.h"
+#include "toolchain.h"
+#include "mbed_interface.h"
+
+WEAK void mbed_die(void) {
+#ifndef NRF51_H
+	__disable_irq();	// dont allow interrupts to disturb the flash pattern
+#endif
+#if   (DEVICE_ERROR_RED == 1)
+    gpio_t led_red; gpio_init_out(&led_red, LED_RED);
+#elif (DEVICE_ERROR_PATTERN == 1)
+    gpio_t led_1; gpio_init_out(&led_1, LED1);
+    gpio_t led_2; gpio_init_out(&led_2, LED2);
+    gpio_t led_3; gpio_init_out(&led_3, LED3);
+    gpio_t led_4; gpio_init_out(&led_4, LED4);
+#endif
+
+    while (1) {
+#if   (DEVICE_ERROR_RED == 1)
+        gpio_write(&led_red, 1);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+        gpio_write(&led_1, 1);
+        gpio_write(&led_2, 0);
+        gpio_write(&led_3, 0);
+        gpio_write(&led_4, 1);
+#endif
+
+        wait_ms(150);
+
+#if   (DEVICE_ERROR_RED == 1)
+        gpio_write(&led_red, 0);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+        gpio_write(&led_1, 0);
+        gpio_write(&led_2, 1);
+        gpio_write(&led_3, 1);
+        gpio_write(&led_4, 0);
+#endif
+
+        wait_ms(150);
+    }
+}