summaryrefslogtreecommitdiff
path: root/tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c')
-rw-r--r--tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c698
1 files changed, 698 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c b/tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c
new file mode 100644
index 0000000000..8f081a618f
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/USBHost/USBHost/TARGET_RENESAS/TARGET_RZ_A1H/usb0/src/userdef/usb0_host_dmacdrv.c
@@ -0,0 +1,698 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/*******************************************************************************
+* File Name : usb0_host_dmacdrv.c
+* $Rev: 1116 $
+* $Date:: 2014-07-09 16:29:19 +0900#$
+* Device(s) : RZ/A1H
+* Tool-Chain :
+* OS : None
+* H/W Platform :
+* Description : RZ/A1H R7S72100 USB Sample Program
+* Operation :
+* Limitations :
+*******************************************************************************/
+
+
+/*******************************************************************************
+Includes <System Includes> , "Project Includes"
+*******************************************************************************/
+#include "r_typedefs.h"
+#include "iodefine.h"
+#include "rza_io_regrw.h"
+#include "usb0_host_dmacdrv.h"
+
+
+/*******************************************************************************
+Typedef definitions
+*******************************************************************************/
+
+
+/*******************************************************************************
+Macro definitions
+*******************************************************************************/
+#define DMAC_INDEFINE (255) /* Macro definition when REQD bit is not used */
+
+/* ==== Request setting information for on-chip peripheral module ==== */
+typedef enum dmac_peri_req_reg_type
+{
+ DMAC_REQ_MID,
+ DMAC_REQ_RID,
+ DMAC_REQ_AM,
+ DMAC_REQ_LVL,
+ DMAC_REQ_REQD
+} dmac_peri_req_reg_type_t;
+
+
+/*******************************************************************************
+Imported global variables and functions (from other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Exported global variables and functions (to be accessed by other files)
+*******************************************************************************/
+
+
+/*******************************************************************************
+Private global variables and functions
+*******************************************************************************/
+/* ==== Prototype declaration ==== */
+
+/* ==== Global variable ==== */
+/* On-chip peripheral module request setting table */
+static const uint8_t usb0_host_dmac_peri_req_init_table[8][5] =
+{
+ /* MID,RID, AM,LVL,REQD */
+ { 32, 3, 2, 1, 1}, /* USB_0 channel 0 transmit FIFO empty */
+ { 32, 3, 2, 1, 0}, /* USB_0 channel 0 receive FIFO full */
+ { 33, 3, 2, 1, 1}, /* USB_0 channel 1 transmit FIFO empty */
+ { 33, 3, 2, 1, 0}, /* USB_0 channel 1 receive FIFO full */
+ { 34, 3, 2, 1, 1}, /* USB_1 channel 0 transmit FIFO empty */
+ { 34, 3, 2, 1, 0}, /* USB_1 channel 0 receive FIFO full */
+ { 35, 3, 2, 1, 1}, /* USB_1 channel 1 transmit FIFO empty */
+ { 35, 3, 2, 1, 0}, /* USB_1 channel 1 receive FIFO full */
+};
+
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC1_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 1.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 1 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t * trans_info : Setting information to DMAC
+* : : register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous
+* : : transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module
+* : : request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction : Setting value of CHCFG_n register
+* : : REQD bit
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC1_PeriReqInit (const dmac_transinfo_t * trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC1.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC1.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC1.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC1_CHCFG_n_DAD_SHIFT,
+ DMAC1_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC1_CHCFG_n_SAD_SHIFT,
+ DMAC1_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->dst_size,
+ DMAC1_CHCFG_n_DDS_SHIFT,
+ DMAC1_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ trans_info->src_size,
+ DMAC1_CHCFG_n_SDS_SHIFT,
+ DMAC1_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_DMS_SHIFT,
+ DMAC1_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_RSEL_SHIFT,
+ DMAC1_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_SBE_SHIFT,
+ DMAC1_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_DEM_SHIFT,
+ DMAC1_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_REN_SHIFT,
+ DMAC1_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_RSW_SHIFT,
+ DMAC1_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_REN_SHIFT,
+ DMAC1_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_RSW_SHIFT,
+ DMAC1_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_TM_SHIFT,
+ DMAC1_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_SEL_SHIFT,
+ DMAC1_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 1,
+ DMAC1_CHCFG_n_HIEN_SHIFT,
+ DMAC1_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ 0,
+ DMAC1_CHCFG_n_LOEN_SHIFT,
+ DMAC1_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC1_CHCFG_n_AM_SHIFT,
+ DMAC1_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC1_CHCFG_n_LVL_SHIFT,
+ DMAC1_CHCFG_n_LVL);
+ if (usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC1_CHCFG_n_REQD_SHIFT,
+ DMAC1_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC1.CHCFG_n,
+ req_direction,
+ DMAC1_CHCFG_n_REQD_SHIFT,
+ DMAC1_CHCFG_n_REQD);
+ }
+ RZA_IO_RegWrite_32(&DMAC01.DMARS,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC01_DMARS_CH1_RID_SHIFT,
+ DMAC01_DMARS_CH1_RID);
+ RZA_IO_RegWrite_32(&DMAC01.DMARS,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC01_DMARS_CH1_MID_SHIFT,
+ DMAC01_DMARS_CH1_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC1_Open
+* Description : Enables DMAC channel 1 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb0_host_DMAC1_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_EN_SHIFT,
+ DMAC1_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_TACT_SHIFT,
+ DMAC1_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_SWRST_SHIFT,
+ DMAC1_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC1.CHCTRL_n,
+ DMAC1_CHCTRL_n_SWRST_SHIFT,
+ DMAC1_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_SETEN_SHIFT,
+ DMAC1_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_STG_SHIFT,
+ DMAC1_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC1_Close
+* Description : Aborts DMAC channel 1 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC1_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC1.CHCTRL_n,
+ 1,
+ DMAC1_CHCTRL_n_CLREN_SHIFT,
+ DMAC1_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_TACT_SHIFT,
+ DMAC1_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_EN_SHIFT,
+ DMAC1_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC1.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC1_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 1 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 1 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC1_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC1.CHSTAT_n,
+ DMAC1_CHSTAT_n_SR_SHIFT,
+ DMAC1_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC1.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC1.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC1.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC1.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC1.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC1.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC2_PeriReqInit
+* Description : Sets the register mode for DMA mode and the on-chip peripheral
+* : module request for transfer request for DMAC channel 2.
+* : Executes DMAC initial setting using the DMA information
+* : specified by the argument *trans_info and the enabled/disabled
+* : continuous transfer specified by the argument continuation.
+* : Registers DMAC channel 2 interrupt handler function and sets
+* : the interrupt priority level. Then enables transfer completion
+* : interrupt.
+* Arguments : dmac_transinfo_t * trans_info : Setting information to DMAC
+* : : register
+* : uint32_t dmamode : DMA mode (only for DMAC_MODE_REGISTER)
+* : uint32_t continuation : Set continuous transfer to be valid
+* : : after DMA transfer has been completed
+* : DMAC_SAMPLE_CONTINUATION : Execute continuous transfer
+* : DMAC_SAMPLE_SINGLE : Do not execute continuous
+* : : transfer
+* : uint32_t request_factor : Factor for on-chip peripheral module
+* : : request
+* : DMAC_REQ_OSTM0TINT : OSTM_0 compare match
+* : DMAC_REQ_OSTM1TINT : OSTM_1 compare match
+* : DMAC_REQ_TGI0A : MTU2_0 input capture/compare match
+* : :
+* : uint32_t req_direction : Setting value of CHCFG_n register
+* : : REQD bit
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC2_PeriReqInit (const dmac_transinfo_t * trans_info, uint32_t dmamode, uint32_t continuation,
+ uint32_t request_factor, uint32_t req_direction)
+{
+ /* ==== Register mode ==== */
+ if (DMAC_MODE_REGISTER == dmamode)
+ {
+ /* ==== Next0 register set ==== */
+ DMAC2.N0SA_n = trans_info->src_addr; /* Start address of transfer source */
+ DMAC2.N0DA_n = trans_info->dst_addr; /* Start address of transfer destination */
+ DMAC2.N0TB_n = trans_info->count; /* Total transfer byte count */
+
+ /* DAD : Transfer destination address counting direction */
+ /* SAD : Transfer source address counting direction */
+ /* DDS : Transfer destination transfer size */
+ /* SDS : Transfer source transfer size */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->daddr_dir,
+ DMAC2_CHCFG_n_DAD_SHIFT,
+ DMAC2_CHCFG_n_DAD);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->saddr_dir,
+ DMAC2_CHCFG_n_SAD_SHIFT,
+ DMAC2_CHCFG_n_SAD);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->dst_size,
+ DMAC2_CHCFG_n_DDS_SHIFT,
+ DMAC2_CHCFG_n_DDS);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ trans_info->src_size,
+ DMAC2_CHCFG_n_SDS_SHIFT,
+ DMAC2_CHCFG_n_SDS);
+
+ /* DMS : Register mode */
+ /* RSEL : Select Next0 register set */
+ /* SBE : No discharge of buffer data when aborted */
+ /* DEM : No DMA interrupt mask */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_DMS_SHIFT,
+ DMAC2_CHCFG_n_DMS);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_RSEL_SHIFT,
+ DMAC2_CHCFG_n_RSEL);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_SBE_SHIFT,
+ DMAC2_CHCFG_n_SBE);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_DEM_SHIFT,
+ DMAC2_CHCFG_n_DEM);
+
+ /* ---- Continuous transfer ---- */
+ if (DMAC_SAMPLE_CONTINUATION == continuation)
+ {
+ /* REN : Execute continuous transfer */
+ /* RSW : Change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_REN_SHIFT,
+ DMAC2_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_RSW_SHIFT,
+ DMAC2_CHCFG_n_RSW);
+ }
+ /* ---- Single transfer ---- */
+ else
+ {
+ /* REN : Do not execute continuous transfer */
+ /* RSW : Do not change register set when DMA transfer is completed. */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_REN_SHIFT,
+ DMAC2_CHCFG_n_REN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_RSW_SHIFT,
+ DMAC2_CHCFG_n_RSW);
+ }
+
+ /* TM : Single transfer */
+ /* SEL : Channel setting */
+ /* HIEN, LOEN : On-chip peripheral module request */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_TM_SHIFT,
+ DMAC2_CHCFG_n_TM);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 2,
+ DMAC2_CHCFG_n_SEL_SHIFT,
+ DMAC2_CHCFG_n_SEL);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 1,
+ DMAC2_CHCFG_n_HIEN_SHIFT,
+ DMAC2_CHCFG_n_HIEN);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ 0,
+ DMAC2_CHCFG_n_LOEN_SHIFT,
+ DMAC2_CHCFG_n_LOEN);
+
+ /* ---- Set factor by specified on-chip peripheral module request ---- */
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_AM],
+ DMAC2_CHCFG_n_AM_SHIFT,
+ DMAC2_CHCFG_n_AM);
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_LVL],
+ DMAC2_CHCFG_n_LVL_SHIFT,
+ DMAC2_CHCFG_n_LVL);
+ if (usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD] != DMAC_INDEFINE)
+ {
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_REQD],
+ DMAC2_CHCFG_n_REQD_SHIFT,
+ DMAC2_CHCFG_n_REQD);
+ }
+ else
+ {
+ RZA_IO_RegWrite_32(&DMAC2.CHCFG_n,
+ req_direction,
+ DMAC2_CHCFG_n_REQD_SHIFT,
+ DMAC2_CHCFG_n_REQD);
+ }
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_RID],
+ DMAC23_DMARS_CH2_RID_SHIFT,
+ DMAC23_DMARS_CH2_RID);
+ RZA_IO_RegWrite_32(&DMAC23.DMARS,
+ usb0_host_dmac_peri_req_init_table[request_factor][DMAC_REQ_MID],
+ DMAC23_DMARS_CH2_MID_SHIFT,
+ DMAC23_DMARS_CH2_MID);
+
+ /* PR : Round robin mode */
+ RZA_IO_RegWrite_32(&DMAC07.DCTRL_0_7,
+ 1,
+ DMAC07_DCTRL_0_7_PR_SHIFT,
+ DMAC07_DCTRL_0_7_PR);
+ }
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC2_Open
+* Description : Enables DMAC channel 2 transfer.
+* Arguments : uint32_t req : DMAC request mode
+* Return Value : 0 : Succeeded in enabling DMA transfer
+* : -1 : Failed to enable DMA transfer (due to DMA operation)
+*******************************************************************************/
+int32_t usb0_host_DMAC2_Open (uint32_t req)
+{
+ int32_t ret;
+ volatile uint8_t dummy;
+
+ /* Transferable? */
+ if ((0 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_EN_SHIFT,
+ DMAC2_CHSTAT_n_EN)) &&
+ (0 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_TACT_SHIFT,
+ DMAC2_CHSTAT_n_TACT)))
+ {
+ /* Clear Channel Status Register */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_SWRST_SHIFT,
+ DMAC2_CHCTRL_n_SWRST);
+ dummy = RZA_IO_RegRead_32(&DMAC2.CHCTRL_n,
+ DMAC2_CHCTRL_n_SWRST_SHIFT,
+ DMAC2_CHCTRL_n_SWRST);
+ /* Enable DMA transfer */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_SETEN_SHIFT,
+ DMAC2_CHCTRL_n_SETEN);
+
+ /* ---- Request by software ---- */
+ if (DMAC_REQ_MODE_SOFT == req)
+ {
+ /* DMA transfer Request by software */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_STG_SHIFT,
+ DMAC2_CHCTRL_n_STG);
+ }
+
+ ret = 0;
+ }
+ else
+ {
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC2_Close
+* Description : Aborts DMAC channel 2 transfer. Returns the remaining transfer
+* : byte count at the time of DMA transfer abort to the argument
+* : *remain.
+* Arguments : uint32_t * remain : Remaining transfer byte count when
+* : : DMA transfer is aborted
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC2_Close (uint32_t * remain)
+{
+
+ /* ==== Abort transfer ==== */
+ RZA_IO_RegWrite_32(&DMAC2.CHCTRL_n,
+ 1,
+ DMAC2_CHCTRL_n_CLREN_SHIFT,
+ DMAC2_CHCTRL_n_CLREN);
+
+ while (1 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_TACT_SHIFT,
+ DMAC2_CHSTAT_n_TACT))
+ {
+ /* Loop until transfer is aborted */
+ }
+
+ while (1 == RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_EN_SHIFT,
+ DMAC2_CHSTAT_n_EN))
+ {
+ /* Loop until 0 is set in EN before checking the remaining transfer byte count */
+ }
+ /* ==== Obtain remaining transfer byte count ==== */
+ *remain = DMAC2.CRTB_n;
+}
+
+/*******************************************************************************
+* Function Name: usb0_host_DMAC2_Load_Set
+* Description : Sets the transfer source address, transfer destination
+* : address, and total transfer byte count respectively
+* : specified by the argument src_addr, dst_addr, and count to
+* : DMAC channel 2 as DMA transfer information.
+* : Sets the register set selected by the CHCFG_n register
+* : RSEL bit from the Next0 or Next1 register set.
+* : This function should be called when DMA transfer of DMAC
+* : channel 2 is aboted.
+* Arguments : uint32_t src_addr : Transfer source address
+* : uint32_t dst_addr : Transfer destination address
+* : uint32_t count : Total transfer byte count
+* Return Value : none
+*******************************************************************************/
+void usb0_host_DMAC2_Load_Set (uint32_t src_addr, uint32_t dst_addr, uint32_t count)
+{
+ uint8_t reg_set;
+
+ /* Obtain register set in use */
+ reg_set = RZA_IO_RegRead_32(&DMAC2.CHSTAT_n,
+ DMAC2_CHSTAT_n_SR_SHIFT,
+ DMAC2_CHSTAT_n_SR);
+
+ /* ==== Load ==== */
+ if (0 == reg_set)
+ {
+ /* ---- Next0 Register Set ---- */
+ DMAC2.N0SA_n = src_addr; /* Start address of transfer source */
+ DMAC2.N0DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC2.N0TB_n = count; /* Total transfer byte count */
+ }
+ else
+ {
+ /* ---- Next1 Register Set ---- */
+ DMAC2.N1SA_n = src_addr; /* Start address of transfer source */
+ DMAC2.N1DA_n = dst_addr; /* Start address of transfer destination */
+ DMAC2.N1TB_n = count; /* Total transfer byte count */
+ }
+}
+
+/* End of File */
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-08 03:17:18 +0000