summaryrefslogtreecommitdiff
path: root/tmk_core/protocol
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol')
-rw-r--r--tmk_core/protocol/bluefruit.mk18
-rw-r--r--tmk_core/protocol/bluefruit/main.c47
-rw-r--r--tmk_core/protocol/pjrc.mk35
-rw-r--r--tmk_core/protocol/pjrc/MEMO.txt25
-rw-r--r--tmk_core/protocol/pjrc/main.c72
-rw-r--r--tmk_core/protocol/pjrc/pjrc.c58
-rw-r--r--tmk_core/protocol/pjrc/pjrc.h25
-rw-r--r--tmk_core/protocol/pjrc/usb.c970
-rw-r--r--tmk_core/protocol/pjrc/usb.h131
-rw-r--r--tmk_core/protocol/pjrc/usb_debug.c98
-rw-r--r--tmk_core/protocol/pjrc/usb_debug.h39
-rw-r--r--tmk_core/protocol/pjrc/usb_extra.c62
-rw-r--r--tmk_core/protocol/pjrc/usb_extra.h44
-rw-r--r--tmk_core/protocol/pjrc/usb_keyboard.c114
-rw-r--r--tmk_core/protocol/pjrc/usb_keyboard.h38
-rw-r--r--tmk_core/protocol/pjrc/usb_mouse.c83
-rw-r--r--tmk_core/protocol/pjrc/usb_mouse.h47
17 files changed, 1 insertions, 1905 deletions
diff --git a/tmk_core/protocol/bluefruit.mk b/tmk_core/protocol/bluefruit.mk
index e1c5fff77f..13a0693c57 100644
--- a/tmk_core/protocol/bluefruit.mk
+++ b/tmk_core/protocol/bluefruit.mk
@@ -1,27 +1,11 @@
BLUEFRUIT_DIR = protocol/bluefruit
-PJRC_DIR = protocol/pjrc
SRC += $(BLUEFRUIT_DIR)/main.c \
$(BLUEFRUIT_DIR)/bluefruit.c \
- serial_uart.c \
- $(PJRC_DIR)/pjrc.c \
- $(PJRC_DIR)/usb_keyboard.c \
- $(PJRC_DIR)/usb_debug.c \
- $(PJRC_DIR)/usb.c
-
-# Option modules
-ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
- SRC += $(PJRC_DIR)/usb_mouse.c
-endif
-
-ifdef EXTRAKEY_ENABLE
- SRC += $(PJRC_DIR)/usb_extra.c
-endif
+ serial_uart.c
# Search Path
VPATH += $(TMK_DIR)/$(BLUEFRUIT_DIR)
#VPATH += $(TMK_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only
-VPATH += $(TMK_DIR)/$(PJRC_DIR)
OPT_DEFS += -DPROTOCOL_BLUEFRUIT
-OPT_DEFS += -DPROTOCOL_PJRC
diff --git a/tmk_core/protocol/bluefruit/main.c b/tmk_core/protocol/bluefruit/main.c
index 3adcab4f42..aca46206d5 100644
--- a/tmk_core/protocol/bluefruit/main.c
+++ b/tmk_core/protocol/bluefruit/main.c
@@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <util/delay.h>
#include "../serial.h"
#include "keyboard.h"
-#include "usb.h"
#include "host.h"
#include "timer.h"
#include "print.h"
@@ -32,14 +31,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "sendchar.h"
#include "suspend.h"
#include "bluefruit.h"
-#include "pjrc.h"
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-#define HOST_DRIVER_NOT_SET 0
-#define BLUEFRUIT_HOST_DRIVER 1
-#define PJRC_HOST_DRIVER 2
-
int main(void) {
CPU_PRESCALE(0);
@@ -51,27 +45,11 @@ int main(void) {
print_set_sendchar(sendchar);
- // usb_init();
- // _delay_ms(2000);
- // while (!usb_configured()) /* wait */
-
keyboard_setup();
dprintf("Initializing keyboard...\n");
keyboard_init();
- // This implementation is pretty simplistic... if the USB connection
- // is not configured, choose the Bluefruit, otherwise use USB
- // Definitely would prefer to have this driven by an input pin and make
- // it switch dynamically - BCG
- // if (!usb_configured()) {
-
- // // Send power to Bluefruit... Adafruit says it takes 27 mA, I think
- // // the pins should provide 40 mA, but just in case I switch the
- // // Bluefruit using a transistor - BCG
- // DDRB = _BV(PB6);
- // PORTB |= _BV(PB6);
-
dprintf("Setting host driver to bluefruit...\n");
host_set_driver(bluefruit_driver());
@@ -106,29 +84,4 @@ int main(void) {
while (1) {
keyboard_task();
}
-
- // } else {
-
- // // I'm not smart enough to get this done with LUFA - BCG
- // dprintf("Setting host driver to PJRC...\n");
- // host_set_driver(pjrc_driver());
- // #ifdef SLEEP_LED_ENABLE
- // sleep_led_init();
- // #endif
- // // wait an extra second for the PC's operating system
- // // to load drivers and do whatever it does to actually
- // // be ready for input
- // _delay_ms(1000);
- // PORTB = ~_BV(PB0);
- // dprintf("Starting main loop");
- // while (1) {
- // while (suspend) {
- // suspend_power_down();
- // if (remote_wakeup && suspend_wakeup_condition()) {
- // usb_remote_wakeup();
- // }
- // }
- // keyboard_task();
- // }
- // }
}
diff --git a/tmk_core/protocol/pjrc.mk b/tmk_core/protocol/pjrc.mk
deleted file mode 100644
index 7c0c1fa851..0000000000
--- a/tmk_core/protocol/pjrc.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-PJRC_DIR = protocol/pjrc
-
-SRC += $(PJRC_DIR)/main.c \
- $(PJRC_DIR)/pjrc.c \
- $(PJRC_DIR)/usb_keyboard.c \
- $(PJRC_DIR)/usb_debug.c \
- $(PJRC_DIR)/usb.c
-
-# Option modules
-ifdef MOUSEKEY_ENABLE
- SRC += $(PJRC_DIR)/usb_mouse.c
-endif
-
-ifdef ADB_MOUSE_ENABLE
- SRC += $(PJRC_DIR)/usb_mouse.c
-endif
-
-ifdef PS2_MOUSE_ENABLE
- SRC += $(PJRC_DIR)/usb_mouse.c
-endif
-
-ifdef EXTRAKEY_ENABLE
- SRC += $(PJRC_DIR)/usb_extra.c
-endif
-
-
-ifdef POINTING_DEVICE_ENABLE
- SRC += $(PJRC_DIR)/usb_mouse.c
-endif
-
-# Search Path
-VPATH += $(TMK_DIR)/$(PJRC_DIR)
-
-# This indicates using LUFA stack
-OPT_DEFS += -DPROTOCOL_PJRC
diff --git a/tmk_core/protocol/pjrc/MEMO.txt b/tmk_core/protocol/pjrc/MEMO.txt
deleted file mode 100644
index b0f0598313..0000000000
--- a/tmk_core/protocol/pjrc/MEMO.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Endpoint configuration
-----------------------
-0 Control endpoint
-1 keyboard
-2 mouse
-3 debug
-4 extra key(consumer/system)
-5 nkro keyboard(supported only on ATmega32U4/16U4 and AT90USB64/128)
-
-
-ATmega32U4/16U4, AT90USB64/128
-• Endpoint 0:programmable size FIFO up to 64 bytes, default control endpoint
-• Endpoints 1 programmable size FIFO up to 256 bytes in ping-pong mode.
-• Endpoints 2 to 6: programmable size FIFO up to 64 bytes in ping-pong mode.
-
-AT90USB82/162, ATmega8U2/16U2/32U2
-• Endpoint 0:programmable size FIFO up to 64 bytes, default control endpoint
-• Endpoints 1 and 2: programmable size FIFO up to 64 bytes.
-• Endpoints 3 and 4: programmable size FIFO up to 64 bytes with ping-pong mode.
-
-ping-pong mode means double buffer feature.
-
-
-NOTE: ATmega8U2/16U2/32U2 is not supported with PJRC stack at this time.
-TODO: Macro definition for ATmega8U2/16U2/32U2 in usb.h
diff --git a/tmk_core/protocol/pjrc/main.c b/tmk_core/protocol/pjrc/main.c
deleted file mode 100644
index d16051c5f8..0000000000
--- a/tmk_core/protocol/pjrc/main.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Keyboard example with debug channel, for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2008 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/wdt.h>
-#include <util/delay.h>
-#include "keyboard.h"
-#include "usb.h"
-#include "matrix.h"
-#include "print.h"
-#include "debug.h"
-#include "sendchar.h"
-#include "util.h"
-#include "suspend.h"
-#include "host.h"
-#include "pjrc.h"
-
-#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-
-int main(void) {
- // set for 16 MHz clock
- CPU_PRESCALE(0);
-
- keyboard_setup();
-
- // Initialize the USB, and then wait for the host to set configuration.
- // If the Teensy is powered without a PC connected to the USB port,
- // this will wait forever.
- usb_init();
- while (!usb_configured()) /* wait */
- ;
-
- print_set_sendchar(sendchar);
-
- keyboard_init();
- host_set_driver(pjrc_driver());
-#ifdef SLEEP_LED_ENABLE
- sleep_led_init();
-#endif
- while (1) {
- while (suspend) {
- suspend_power_down();
- if (remote_wakeup && suspend_wakeup_condition()) {
- usb_remote_wakeup();
- }
- }
-
- keyboard_task();
- }
-}
diff --git a/tmk_core/protocol/pjrc/pjrc.c b/tmk_core/protocol/pjrc/pjrc.c
deleted file mode 100644
index 60932f59e8..0000000000
--- a/tmk_core/protocol/pjrc/pjrc.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include "usb_keyboard.h"
-#include "usb_mouse.h"
-#include "usb_extra.h"
-#include "host_driver.h"
-#include "pjrc.h"
-
-/*------------------------------------------------------------------*
- * Host driver
- *------------------------------------------------------------------*/
-static uint8_t keyboard_leds(void);
-static void send_keyboard(report_keyboard_t *report);
-static void send_mouse(report_mouse_t *report);
-static void send_system(uint16_t data);
-static void send_consumer(uint16_t data);
-
-static host_driver_t driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer};
-
-host_driver_t *pjrc_driver(void) { return &driver; }
-
-static uint8_t keyboard_leds(void) { return usb_keyboard_leds; }
-
-static void send_keyboard(report_keyboard_t *report) { usb_keyboard_send_report(report); }
-
-static void send_mouse(report_mouse_t *report) {
-#ifdef MOUSE_ENABLE
- usb_mouse_send(report->x, report->y, report->v, report->h, report->buttons);
-#endif
-}
-
-static void send_system(uint16_t data) {
-#ifdef EXTRAKEY_ENABLE
- usb_extra_system_send(data);
-#endif
-}
-
-static void send_consumer(uint16_t data) {
-#ifdef EXTRAKEY_ENABLE
- usb_extra_consumer_send(data);
-#endif
-}
diff --git a/tmk_core/protocol/pjrc/pjrc.h b/tmk_core/protocol/pjrc/pjrc.h
deleted file mode 100644
index 08a1ede186..0000000000
--- a/tmk_core/protocol/pjrc/pjrc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef PJRC_H
-#define PJRC_H
-
-#include "host_driver.h"
-
-host_driver_t *pjrc_driver(void);
-
-#endif
diff --git a/tmk_core/protocol/pjrc/usb.c b/tmk_core/protocol/pjrc/usb.c
deleted file mode 100644
index 22fbcfdcd4..0000000000
--- a/tmk_core/protocol/pjrc/usb.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-#include "usb.h"
-#include "usb_keyboard.h"
-#include "usb_mouse.h"
-#include "usb_debug.h"
-#include "usb_extra.h"
-#include "led.h"
-#include "print.h"
-#include "util.h"
-#ifdef SLEEP_LED_ENABLE
-# include "sleep_led.h"
-#endif
-#include "suspend.h"
-#include "action.h"
-#include "action_util.h"
-
-#ifdef NKRO_ENABLE
-# include "keycode_config.h"
-
-extern keymap_config_t keymap_config;
-#endif
-
-/**************************************************************************
- *
- * Configurable Options
- *
- **************************************************************************/
-
-// You can change these to give your code its own name.
-#ifndef MANUFACTURER
-# define STR_MANUFACTURER L"t.m.k."
-#else
-# define STR_MANUFACTURER LSTR(MANUFACTURER)
-#endif
-#ifndef PRODUCT
-# define STR_PRODUCT L"t.m.k. keyboard"
-#else
-# define STR_PRODUCT LSTR(PRODUCT)
-#endif
-
-// Mac OS-X and Linux automatically load the correct drivers. On
-// Windows, even though the driver is supplied by Microsoft, an
-// INF file is needed to load the driver. These numbers need to
-// match the INF file.
-#ifndef VENDOR_ID
-# define VENDOR_ID 0xFEED
-#endif
-
-#ifndef PRODUCT_ID
-# define PRODUCT_ID 0xBABE
-#endif
-
-#ifndef DEVICE_VER
-# define DEVICE_VER 0x0100
-#endif
-
-// USB devices are supposed to implment a halt feature, which is
-// rarely (if ever) used. If you comment this line out, the halt
-// code will be removed, saving 102 bytes of space (gcc 4.3.0).
-// This is not strictly USB compliant, but works with all major
-// operating systems.
-#define SUPPORT_ENDPOINT_HALT
-
-/**************************************************************************
- *
- * Endpoint Buffer Configuration
- *
- **************************************************************************/
-
-#define ENDPOINT0_SIZE 32
-
-bool remote_wakeup = false;
-bool suspend = false;
-
-// 0:control endpoint is enabled automatically by controller.
-static const uint8_t PROGMEM endpoint_config_table[] = {
- // enable, UECFG0X(type, direction), UECFG1X(size, bank, allocation)
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD_SIZE) | KBD_BUFFER, // 1
-#ifdef MOUSE_ENABLE
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(MOUSE_SIZE) | MOUSE_BUFFER, // 2
-#else
- 0, // 2
-#endif
-#ifdef CONSOLE_ENABLE
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER, // 3
-#else
- 0,
-#endif
-#ifdef EXTRAKEY_ENABLE
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(EXTRA_SIZE) | EXTRA_BUFFER, // 4
-#else
- 0, // 4
-#endif
-#ifdef NKRO_ENABLE
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD2_SIZE) | KBD2_BUFFER, // 5
-#else
- 0, // 5
-#endif
- 0, // 6
-};
-
-/**************************************************************************
- *
- * Descriptor Data
- *
- **************************************************************************/
-
-// Descriptors are the data that your computer reads when it auto-detects
-// this USB device (called "enumeration" in USB lingo). The most commonly
-// changed items are editable at the top of this file. Changing things
-// in here should only be done by those who've read chapter 9 of the USB
-// spec and relevant portions of any USB class specifications!
-
-static const uint8_t PROGMEM device_descriptor[] = {
- 18, // bLength
- 1, // bDescriptorType
- 0x00,
- 0x02, // bcdUSB
- 0, // bDeviceClass
- 0, // bDeviceSubClass
- 0, // bDeviceProtocol
- ENDPOINT0_SIZE, // bMaxPacketSize0
- LSB(VENDOR_ID),
- MSB(VENDOR_ID), // idVendor
- LSB(PRODUCT_ID),
- MSB(PRODUCT_ID), // idProduct
- LSB(DEVICE_VER),
- MSB(DEVICE_VER), // bcdDevice
- 1, // iManufacturer
- 2, // iProduct
- 0, // iSerialNumber
- 1 // bNumConfigurations
-};
-
-// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
-static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
- 0x05, 0x01, // Usage Page (Generic Desktop),
- 0x09, 0x06, // Usage (Keyboard),
- 0xA1, 0x01, // Collection (Application),
- 0x75, 0x01, // Report Size (1),
- 0x95, 0x08, // Report Count (8),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0xE0, // Usage Minimum (224),
- 0x29, 0xE7, // Usage Maximum (231),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x01, // Logical Maximum (1),
- 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x08, // Report Size (8),
- 0x81, 0x03, // Input (Constant), ;Reserved byte
- 0x95, 0x05, // Report Count (5),
- 0x75, 0x01, // Report Size (1),
- 0x05, 0x08, // Usage Page (LEDs),
- 0x19, 0x01, // Usage Minimum (1),
- 0x29, 0x05, // Usage Maximum (5),
- 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x03, // Report Size (3),
- 0x91, 0x03, // Output (Constant), ;LED report padding
- 0x95, KBD_REPORT_KEYS, // Report Count (),
- 0x75, 0x08, // Report Size (8),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0xFF, // Logical Maximum(255),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0x00, // Usage Minimum (0),
- 0x29, 0xFF, // Usage Maximum (255),
- 0x81, 0x00, // Input (Data, Array),
- 0xc0 // End Collection
-};
-#ifdef NKRO_ENABLE
-static const uint8_t PROGMEM keyboard2_hid_report_desc[] = {
- 0x05, 0x01, // Usage Page (Generic Desktop),
- 0x09, 0x06, // Usage (Keyboard),
- 0xA1, 0x01, // Collection (Application),
- // bitmap of modifiers
- 0x75, 0x01, // Report Size (1),
- 0x95, 0x08, // Report Count (8),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0xE0, // Usage Minimum (224),
- 0x29, 0xE7, // Usage Maximum (231),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x01, // Logical Maximum (1),
- 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
- // LED output report
- 0x95, 0x05, // Report Count (5),
- 0x75, 0x01, // Report Size (1),
- 0x05, 0x08, // Usage Page (LEDs),
- 0x19, 0x01, // Usage Minimum (1),
- 0x29, 0x05, // Usage Maximum (5),
- 0x91, 0x02, // Output (Data, Variable, Absolute),
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x03, // Report Size (3),
- 0x91, 0x03, // Output (Constant),
- // bitmap of keys
- 0x95, KBD2_REPORT_KEYS * 8, // Report Count (),
- 0x75, 0x01, // Report Size (1),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x01, // Logical Maximum(1),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0x00, // Usage Minimum (0),
- 0x29, KBD2_REPORT_KEYS * 8 - 1, // Usage Maximum (),
- 0x81, 0x02, // Input (Data, Variable, Absolute),
- 0xc0 // End Collection
-};
-#endif
-
-#ifdef MOUSE_ENABLE
-// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
-// http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521
-// http://www.keil.com/forum/15671/
-// http://www.microsoft.com/whdc/device/input/wheel.mspx
-static const uint8_t PROGMEM mouse_hid_report_desc[] = {
- /* mouse */
- 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
- 0x09, 0x02, // USAGE (Mouse)
- 0xa1, 0x01, // COLLECTION (Application)
- // 0x85, REPORT_ID_MOUSE, // REPORT_ID (1)
- 0x09, 0x01, // USAGE (Pointer)
- 0xa1, 0x00, // COLLECTION (Physical)
- // ---------------------------- Buttons
- 0x05, 0x09, // USAGE_PAGE (Button)
- 0x19, 0x01, // USAGE_MINIMUM (Button 1)
- 0x29, 0x05, // USAGE_MAXIMUM (Button 5)
- 0x15, 0x00, // LOGICAL_MINIMUM (0)
- 0x25, 0x01, // LOGICAL_MAXIMUM (1)
- 0x75, 0x01, // REPORT_SIZE (1)
- 0x95, 0x05, // REPORT_COUNT (5)
- 0x81, 0x02, // INPUT (Data,Var,Abs)
- 0x75, 0x03, // REPORT_SIZE (3)
- 0x95, 0x01, // REPORT_COUNT (1)
- 0x81, 0x03, // INPUT (Cnst,Var,Abs)
- // ---------------------------- X,Y position
- 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
- 0x09, 0x30, // USAGE (X)
- 0x09, 0x31, // USAGE (Y)
- 0x15, 0x81, // LOGICAL_MINIMUM (-127)
- 0x25, 0x7f, // LOGICAL_MAXIMUM (127)
- 0x75, 0x08, // REPORT_SIZE (8)
- 0x95, 0x02, // REPORT_COUNT (2)
- 0x81, 0x06, // INPUT (Data,Var,Rel)
- // ---------------------------- Vertical wheel
- 0x09, 0x38, // USAGE (Wheel)
- 0x15, 0x81, // LOGICAL_MINIMUM (-127)
- 0x25, 0x7f, // LOGICAL_MAXIMUM (127)
- 0x35, 0x00, // PHYSICAL_MINIMUM (0) - reset physical
- 0x45, 0x00, // PHYSICAL_MAXIMUM (0)
- 0x75, 0x08, // REPORT_SIZE (8)
- 0x95, 0x01, // REPORT_COUNT (1)
- 0x81, 0x06, // INPUT (Data,Var,Rel)
- // ---------------------------- Horizontal wheel
- 0x05, 0x0c, // USAGE_PAGE (Consumer Devices)
- 0x0a, 0x38, 0x02, // USAGE (AC Pan)
- 0x15, 0x81, // LOGICAL_MINIMUM (-127)
- 0x25, 0x7f, // LOGICAL_MAXIMUM (127)
- 0x75, 0x08, // REPORT_SIZE (8)
- 0x95, 0x01, // REPORT_COUNT (1)
- 0x81, 0x06, // INPUT (Data,Var,Rel)
- 0xc0, // END_COLLECTION
- 0xc0, // END_COLLECTION
-};
-#endif
-
-static const uint8_t PROGMEM debug_hid_report_desc[] = {
- 0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined)
- 0x09, 0x74, // Usage 0x74
- 0xA1, 0x53, // Collection 0x53
- 0x75, 0x08, // report size = 8 bits
- 0x15, 0x00, // logical minimum = 0
- 0x26, 0xFF, 0x00, // logical maximum = 255
- 0x95, DEBUG_TX_SIZE, // report count
- 0x09, 0x75, // usage
- 0x81, 0x02, // Input (array)
- 0xC0 // end collection
-};
-
-#ifdef EXTRAKEY_ENABLE
-// audio controls & system controls
-// http://www.microsoft.com/whdc/archive/w2kbd.mspx
-static const uint8_t PROGMEM extra_hid_report_desc[] = {
- /* system control */
- 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
- 0x09, 0x80, // USAGE (System Control)
- 0xa1, 0x01, // COLLECTION (Application)
- 0x85, REPORT_ID_SYSTEM, // REPORT_ID (2)
- 0x15, 0x01, // LOGICAL_MINIMUM (0x1)
- 0x25, 0xb7, // LOGICAL_MAXIMUM (0xb7)
- 0x19, 0x01, // USAGE_MINIMUM (0x1)
- 0x29, 0xb7, // USAGE_MAXIMUM (0xb7)
- 0x75, 0x10, // REPORT_SIZE (16)
- 0x95, 0x01, // REPORT_COUNT (1)
- 0x81, 0x00, // INPUT (Data,Array,Abs)
- 0xc0, // END_COLLECTION
- /* consumer */
- 0x05, 0x0c, // USAGE_PAGE (Consumer Devices)
- 0x09, 0x01, // USAGE (Consumer Control)
- 0xa1, 0x01, // COLLECTION (Application)
- 0x85, REPORT_ID_CONSUMER, // REPORT_ID (3)
- 0x15, 0x01, // LOGICAL_MINIMUM (0x1)
- 0x26, 0x9c, 0x02, // LOGICAL_MAXIMUM (0x29c)
- 0x19, 0x01, // USAGE_MINIMUM (0x1)
- 0x2a, 0x9c, 0x02, // USAGE_MAXIMUM (0x29c)
- 0x75, 0x10, // REPORT_SIZE (16)
- 0x95, 0x01, // REPORT_COUNT (1)
- 0x81, 0x00, // INPUT (Data,Array,Abs)
- 0xc0, // END_COLLECTION
-};
-#endif
-
-#define KBD_HID_DESC_NUM 0
-#define KBD_HID_DESC_OFFSET (9 + (9 + 9 + 7) * KBD_HID_DESC_NUM + 9)
-
-#ifdef MOUSE_ENABLE
-# define MOUSE_HID_DESC_NUM (KBD_HID_DESC_NUM + 1)
-# define MOUSE_HID_DESC_OFFSET (9 + (9 + 9 + 7) * MOUSE_HID_DESC_NUM + 9)
-#else
-# define MOUSE_HID_DESC_NUM (KBD_HID_DESC_NUM + 0)
-#endif
-
-#ifdef CONSOLE_ENABLE
-# define DEBUG_HID_DESC_NUM (MOUSE_HID_DESC_NUM + 1)
-# define DEBUG_HID_DESC_OFFSET (9 + (9 + 9 + 7) * DEBUG_HID_DESC_NUM + 9)
-#else
-# define DEBUG_HID_DESC_NUM (MOUSE_HID_DESC_NUM + 0)
-#endif
-
-#ifdef EXTRAKEY_ENABLE
-# define EXTRA_HID_DESC_NUM (DEBUG_HID_DESC_NUM + 1)
-# define EXTRA_HID_DESC_OFFSET (9 + (9 + 9 + 7) * EXTRA_HID_DESC_NUM + 9)
-#else
-# define EXTRA_HID_DESC_NUM (DEBUG_HID_DESC_NUM + 0)
-#endif
-
-#ifdef NKRO_ENABLE
-# define KBD2_HID_DESC_NUM (EXTRA_HID_DESC_NUM + 1)
-# define KBD2_HID_DESC_OFFSET (9 + (9 + 9 + 7) * EXTRA_HID_DESC_NUM + 9)
-#else
-# define KBD2_HID_DESC_NUM (EXTRA_HID_DESC_NUM + 0)
-#endif
-
-#define NUM_INTERFACES (KBD2_HID_DESC_NUM + 1)
-#define CONFIG1_DESC_SIZE (9 + (9 + 9 + 7) * NUM_INTERFACES)
-static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
- // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
- 9, // bLength;
- 2, // bDescriptorType;
- LSB(CONFIG1_DESC_SIZE), // wTotalLength
- MSB(CONFIG1_DESC_SIZE),
- NUM_INTERFACES, // bNumInterfaces
- 1, // bConfigurationValue
- 0, // iConfiguration
- 0xA0, // bmAttributes
- 50, // bMaxPower
-
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- KBD_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x01, // bInterfaceSubClass (0x01 = Boot)
- 0x01, // bInterfaceProtocol (0x01 = Keyboard)
- 0, // iInterface
- // HID descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(keyboard_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- KBD_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- KBD_SIZE, 0, // wMaxPacketSize
- 10, // bInterval
-
-#ifdef MOUSE_ENABLE
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- MOUSE_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- // ThinkPad T23 BIOS doesn't work with boot mouse.
- 0x00, // bInterfaceSubClass (0x01 = Boot)
- 0x00, // bInterfaceProtocol (0x02 = Mouse)
- /*
- 0x01, // bInterfaceSubClass (0x01 = Boot)
- 0x02, // bInterfaceProtocol (0x02 = Mouse)
- */
- 0, // iInterface
- // HID descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(mouse_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- MOUSE_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- MOUSE_SIZE, 0, // wMaxPacketSize
- 1, // bInterval
-#endif
-
-#ifdef CONSOLE_ENABLE
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- DEBUG_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x00, // bInterfaceSubClass
- 0x00, // bInterfaceProtocol
- 0, // iInterface
- // HID descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(debug_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- DEBUG_TX_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- DEBUG_TX_SIZE, 0, // wMaxPacketSize
- 1, // bInterval
-#endif
-
-#ifdef EXTRAKEY_ENABLE
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- EXTRA_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x00, // bInterfaceSubClass
- 0x00, // bInterfaceProtocol
- 0, // iInterface
- // HID descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(extra_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- EXTRA_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- EXTRA_SIZE, 0, // wMaxPacketSize
- 10, // bInterval
-#endif
-
-#ifdef NKRO_ENABLE
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- KBD2_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x00, // bInterfaceSubClass (0x01 = Boot)
- 0x00, // bInterfaceProtocol (0x01 = Keyboard)
- 0, // iInterface
- // HID descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(keyboard2_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- KBD2_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- KBD2_SIZE, 0, // wMaxPacketSize
- 1, // bInterval
-#endif
-};
-
-// If you're desperate for a little extra code memory, these strings
-// can be completely removed if iManufacturer, iProduct, iSerialNumber
-// in the device desciptor are changed to zeros.
-struct usb_string_descriptor_struct {
- uint8_t bLength;
- uint8_t bDescriptorType;
- int16_t wString[];
-};
-static const struct usb_string_descriptor_struct PROGMEM string0 = {4, 3, {0x0409}};
-static const struct usb_string_descriptor_struct PROGMEM string1 = {sizeof(STR_MANUFACTURER), 3, STR_MANUFACTURER};
-static const struct usb_string_descriptor_struct PROGMEM string2 = {sizeof(STR_PRODUCT), 3, STR_PRODUCT};
-
-// This table defines which descriptor data is sent for each specific
-// request from the host (in wValue and wIndex).
-static const struct descriptor_list_struct {
- uint16_t wValue; // descriptor type
- uint16_t wIndex;
- const uint8_t *addr;
- uint8_t length;
-} PROGMEM descriptor_list[] = {
- // DEVICE descriptor
- {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
- // CONFIGURATION descriptor
- {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
- // HID/REPORT descriptors
- {0x2100, KBD_INTERFACE, config1_descriptor + KBD_HID_DESC_OFFSET, 9},
- {0x2200, KBD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
-#ifdef MOUSE_ENABLE
- {0x2100, MOUSE_INTERFACE, config1_descriptor + MOUSE_HID_DESC_OFFSET, 9},
- {0x2200, MOUSE_INTERFACE, mouse_hid_report_desc, sizeof(mouse_hid_report_desc)},
-#endif
-#ifdef CONSOLE_ENABLE
- {0x2100, DEBUG_INTERFACE, config1_descriptor + DEBUG_HID_DESC_OFFSET, 9},
- {0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)},
-#endif
-#ifdef EXTRAKEY_ENABLE
- {0x2100, EXTRA_INTERFACE, config1_descriptor + EXTRA_HID_DESC_OFFSET, 9},
- {0x2200, EXTRA_INTERFACE, extra_hid_report_desc, sizeof(extra_hid_report_desc)},
-#endif
-#ifdef NKRO_ENABLE
- {0x2100, KBD2_INTERFACE, config1_descriptor + KBD2_HID_DESC_OFFSET, 9},
- {0x2200, KBD2_INTERFACE, keyboard2_hid_report_desc, sizeof(keyboard2_hid_report_desc)},
-#endif
- // STRING descriptors
- {0x0300, 0x0000, (const uint8_t *)&string0, 4},
- {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
- {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}};
-#define NUM_DESC_LIST (sizeof(descriptor_list) / sizeof(struct descriptor_list_struct))
-
-/**************************************************************************
- *
- * Variables - these are the only non-stack RAM usage
- *
- **************************************************************************/
-
-// zero when we are not configured, non-zero when enumerated
-static volatile uint8_t usb_configuration = 0;
-
-/**************************************************************************
- *
- * Public Functions - these are the API intended for the user
- *
- **************************************************************************/
-
-// initialize USB
-void usb_init(void) {
- HW_CONFIG();
- USB_FREEZE(); // enable USB
- PLL_CONFIG(); // config PLL
- while (!(PLLCSR & (1 << PLOCK)))
- ; // wait for PLL lock
- USB_CONFIG(); // start USB clock
- UDCON = 0; // enable attach resistor
- usb_configuration = 0;
- suspend = false;
- UDIEN = (1 << EORSTE) | (1 << SOFE) | (1 << SUSPE) | (1 << WAKEUPE);
- sei();
-}
-
-// return 0 if the USB is not configured, or the configuration
-// number selected by the HOST
-uint8_t usb_configured(void) { return usb_configuration && !suspend; }
-
-void usb_remote_wakeup(void) {
- UDCON |= (1 << RMWKUP);
- while (UDCON & (1 << RMWKUP))
- ;
-}
-
-/**************************************************************************
- *
- * Private Functions - not intended for general user consumption....
- *
- **************************************************************************/
-
-// USB Device Interrupt - handle all device-level events
-// the transmit buffer flushing is triggered by the start of frame
-//
-ISR(USB_GEN_vect) {
- uint8_t intbits, t;
- static uint8_t div4 = 0;
-
- intbits = UDINT;
- UDINT = 0;
- if ((intbits & (1 << SUSPI)) && (UDIEN & (1 << SUSPE)) && usb_configuration) {
-#ifdef SLEEP_LED_ENABLE
- sleep_led_enable();
-#endif
- UDIEN &= ~(1 << SUSPE);
- UDIEN |= (1 << WAKEUPE);
- suspend = true;
- }
- if ((intbits & (1 << WAKEUPI)) && (UDIEN & (1 << WAKEUPE)) && usb_configuration) {
- suspend_wakeup_init();
-#ifdef SLEEP_LED_ENABLE
- sleep_led_disable();
- // NOTE: converters may not accept this
- led_set(host_keyboard_leds());
-#endif
-
- UDIEN |= (1 << SUSPE);
- UDIEN &= ~(1 << WAKEUPE);
- suspend = false;
- }
- if (intbits & (1 << EORSTI)) {
- UENUM = 0;
- UECONX = 1;
- UECFG0X = EP_TYPE_CONTROL;
- UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
- UEIENX = (1 << RXSTPE);
- usb_configuration = 0;
- }
- if ((intbits & (1 << SOFI)) && usb_configuration) {
- t = debug_flush_timer;
- if (t) {
- debug_flush_timer = --t;
- if (!t) {
- UENUM = DEBUG_TX_ENDPOINT;
- while ((UEINTX & (1 << RWAL))) {
- UEDATX = 0;
- }
- UEINTX = 0x3A;
- }
- }
- /* TODO: should keep IDLE rate on each keyboard interface */
-#ifdef NKRO_ENABLE
- if (!keymap_config.nkro && keyboard_idle && (++div4 & 3) == 0) {
-#else
- if (keyboard_idle && (++div4 & 3) == 0) {
-#endif
- UENUM = KBD_ENDPOINT;
- if (UEINTX & (1 << RWAL)) {
- usb_keyboard_idle_count++;
- if (usb_keyboard_idle_count == keyboard_idle) {
- usb_keyboard_idle_count = 0;
- /* TODO: fix keyboard_report inconsistency */
- /* To avoid Mac SET_IDLE behaviour.
- UEDATX = keyboard_report_prev->mods;
- UEDATX = 0;
- uint8_t keys = keyboard_protocol ? KBD_REPORT_KEYS : 6;
- for (uint8_t i=0; i<keys; i++) {
- UEDATX = keyboard_report_prev->keys[i];
- }
- UEINTX = 0x3A;
- */
- }
- }
- }
- }
-}
-
-// Misc functions to wait for ready and send/receive packets
-static inline void usb_wait_in_ready(void) {
- while (!(UEINTX & (1 << TXINI)))
- ;
-}
-static inline void usb_send_in(void) { UEINTX = ~(1 << TXINI); }
-static inline void usb_wait_receive_out(void) {
- while (!(UEINTX & (1 << RXOUTI)))
- ;
-}
-static inline void usb_ack_out(void) { UEINTX = ~(1 << RXOUTI); }
-
-// USB Endpoint Interrupt - endpoint 0 is handled here. The
-// other endpoints are manipulated by the user-callable
-// functions, and the start-of-frame interrupt.
-//
-ISR(USB_COM_vect) {
- uint8_t intbits;
- const uint8_t *list;
- const uint8_t *cfg;
- uint8_t i, n, len, en;
- uint8_t bmRequestType;
- uint8_t bRequest;
- uint16_t wValue;
- uint16_t wIndex;
- uint16_t wLength;
- uint16_t desc_val;
- const uint8_t *desc_addr;
- uint8_t desc_length;
-
- UENUM = 0;
- intbits = UEINTX;
- if (intbits & (1 << RXSTPI)) {
- bmRequestType = UEDATX;
- bRequest = UEDATX;
- wValue = UEDATX;
- wValue |= (UEDATX << 8);
- wIndex = UEDATX;
- wIndex |= (UEDATX << 8);
- wLength = UEDATX;
- wLength |= (UEDATX << 8);
- UEINTX = ~((1 << RXSTPI) | (1 << RXOUTI) | (1 << TXINI));
- if (bRequest == GET_DESCRIPTOR) {
- list = (const uint8_t *)descriptor_list;
- for (i = 0;; i++) {
- if (i >= NUM_DESC_LIST) {
- UECONX = (1 << STALLRQ) | (1 << EPEN); // stall
- return;
- }
- desc_val = pgm_read_word(list);
- if (desc_val != wValue) {
- list += sizeof(struct descriptor_list_struct);
- continue;
- }
- list += 2;
- desc_val = pgm_read_word(list);
- if (desc_val != wIndex) {
- list += sizeof(struct descriptor_list_struct) - 2;
- continue;
- }
- list += 2;
- desc_addr = (const uint8_t *)pgm_read_word(list);
- list += 2;
- desc_length = pgm_read_byte(list);
- break;
- }
- len = (wLength < 256) ? wLength : 255;
- if (len > desc_length) len = desc_length;
- do {
- // wait for host ready for IN packet
- do {
- i = UEINTX;
- } while (!(i & ((1 << TXINI) | (1 << RXOUTI))));
- if (i & (1 << RXOUTI)) return; // abort
- // send IN packet
- n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
- for (i = n; i; i--) {
- UEDATX = pgm_read_byte(desc_addr++);
- }
- len -= n;
- usb_send_in();
- } while (len || n == ENDPOINT0_SIZE);
- return;
- }
- if (bRequest == SET_ADDRESS) {
- usb_send_in();
- usb_wait_in_ready();
- UDADDR = wValue | (1 << ADDEN);
- return;
- }
- if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
- usb_configuration = wValue;
- usb_send_in();
- cfg = endpoint_config_table;
- for (i = 1; i <= MAX_ENDPOINT; i++) {
- UENUM = i;
- en = pgm_read_byte(cfg++);
- if (en) {
- UECONX = (1 << EPEN);
- UECFG0X = pgm_read_byte(cfg++);
- UECFG1X = pgm_read_byte(cfg++);
- } else {
- UECONX = 0;
- }
- }
- UERST = UERST_MASK;
- UERST = 0;
- return;
- }
- if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
- usb_wait_in_ready();
- UEDATX = usb_configuration;
- usb_send_in();
- return;
- }
-
- if (bRequest == GET_STATUS) {
- usb_wait_in_ready();
- i = 0;
-#ifdef SUPPORT_ENDPOINT_HALT
- if (bmRequestType == 0x82) {
- UENUM = wIndex;
- if (UECONX & (1 << STALLRQ)) i = 1;
- UENUM = 0;
- }
-#endif
- UEDATX = i;
- UEDATX = 0;
- usb_send_in();
- return;
- }
- if (bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE) {
-#ifdef SUPPORT_ENDPOINT_HALT
- if (bmRequestType == 0x02 && wValue == ENDPOINT_HALT) {
- i = wIndex & 0x7F;
- if (i >= 1 && i <= MAX_ENDPOINT) {
- usb_send_in();
- UENUM = i;
- if (bRequest == SET_FEATURE) {
- UECONX = (1 << STALLRQ) | (1 << EPEN);
- } else {
- UECONX = (1 << STALLRQC) | (1 << RSTDT) | (1 << EPEN);
- UERST = (1 << i);
- UERST = 0;
- }
- return;
- }
- }
-#endif
- if (bmRequestType == 0x00 && wValue == DEVICE_REMOTE_WAKEUP) {
- if (bRequest == SET_FEATURE) {
- remote_wakeup = true;
- } else {
- remote_wakeup = false;
- }
- usb_send_in();
- return;
- }
- }
- if (wIndex == KBD_INTERFACE) {
- if (bmRequestType == 0xA1) {
- if (bRequest == HID_GET_REPORT) {
- usb_wait_in_ready();
- UEDATX = keyboard_report->mods;
- UEDATX = 0;
- for (i = 0; i < 6; i++) {
- UEDATX = keyboard_report->keys[i];
- }
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_IDLE) {
- usb_wait_in_ready();
- UEDATX = keyboard_idle;
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_PROTOCOL) {
- usb_wait_in_ready();
- UEDATX = keyboard_protocol;
- usb_send_in();
- return;
- }
- }
- if (bmRequestType == 0x21) {
- if (bRequest == HID_SET_REPORT) {
- usb_wait_receive_out();
- usb_keyboard_leds = UEDATX;
- usb_ack_out();
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_IDLE) {
- keyboard_idle = (wValue >> 8);
- usb_keyboard_idle_count = 0;
- // usb_wait_in_ready();
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_PROTOCOL) {
- keyboard_protocol = wValue;
-#ifdef NKRO_ENABLE
- keymap_config.nkro = !!keyboard_protocol;
-#endif
- clear_keyboard();
- // usb_wait_in_ready();
- usb_send_in();
- return;
- }
- }
- }
-#ifdef MOUSE_ENABLE
- if (wIndex == MOUSE_INTERFACE) {
- if (bmRequestType == 0xA1) {
- if (bRequest == HID_GET_REPORT) {
- if (wValue == HID_REPORT_INPUT) {
- usb_wait_in_ready();
- UEDATX = 0;
- UEDATX = 0;
- UEDATX = 0;
- UEDATX = 0;
- usb_send_in();
- return;
- }
- if (wValue == HID_REPORT_FEATURE) {
- usb_wait_in_ready();
- UEDATX = 0x05;
- usb_send_in();
- return;
- }
- }
- if (bRequest == HID_GET_PROTOCOL) {
- usb_wait_in_ready();
- UEDATX = usb_mouse_protocol;
- usb_send_in();
- return;
- }
- }
- if (bmRequestType == 0x21) {
- if (bRequest == HID_SET_PROTOCOL) {
- usb_mouse_protocol = wValue;
- usb_send_in();
- return;
- }
- }
- }
-#endif
- if (wIndex == DEBUG_INTERFACE) {
- if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) {
- len = wLength;
- do {
- // wait for host ready for IN packet
- do {
- i = UEINTX;
- } while (!(i & ((1 << TXINI) | (1 << RXOUTI))));
- if (i & (1 << RXOUTI)) return; // abort
- // send IN packet
- n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
- for (i = n; i; i--) {
- UEDATX = 0;
- }
- len -= n;
- usb_send_in();
- } while (len || n == ENDPOINT0_SIZE);
- return;
- }
- }
- }
- UECONX = (1 << STALLRQ) | (1 << EPEN); // stall
-}
diff --git a/tmk_core/protocol/pjrc/usb.h b/tmk_core/protocol/pjrc/usb.h
deleted file mode 100644
index 50654dccf7..0000000000
--- a/tmk_core/protocol/pjrc/usb.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_H
-#define USB_H 1
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-
-extern bool remote_wakeup;
-extern bool suspend;
-
-void usb_init(void); // initialize everything
-uint8_t usb_configured(void); // is the USB port configured
-void usb_remote_wakeup(void);
-
-#define EP_TYPE_CONTROL 0x00
-#define EP_TYPE_BULK_IN 0x81
-#define EP_TYPE_BULK_OUT 0x80
-#define EP_TYPE_INTERRUPT_IN 0xC1
-#define EP_TYPE_INTERRUPT_OUT 0xC0
-#define EP_TYPE_ISOCHRONOUS_IN 0x41
-#define EP_TYPE_ISOCHRONOUS_OUT 0x40
-
-#define EP_SINGLE_BUFFER 0x02
-#define EP_DOUBLE_BUFFER 0x06
-
-#define EP_SIZE(s) ((s) == 64 ? 0x30 : ((s) == 32 ? 0x20 : ((s) == 16 ? 0x10 : 0x00)))
-
-#if defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)
-# define MAX_ENDPOINT 4
-# define UERST_MASK 0x1E
-#else
-# define MAX_ENDPOINT 6
-# define UERST_MASK 0x7E
-#endif
-
-#define LSB(n) (n & 255)
-#define MSB(n) ((n >> 8) & 255)
-
-#if defined(__AVR_AT90USB162__)
-# define HW_CONFIG()
-# define PLL_CONFIG() (PLLCSR = ((1 << PLLE) | (1 << PLLP0)))
-# define USB_CONFIG() (USBCON = (1 << USBE))
-# define USB_FREEZE() (USBCON = ((1 << USBE) | (1 << FRZCLK)))
-#elif defined(__AVR_ATmega32U4__)
-# define HW_CONFIG() (UHWCON = 0x01)
-# define PLL_CONFIG() (PLLCSR = 0x12)
-# define USB_CONFIG() (USBCON = ((1 << USBE) | (1 << OTGPADE)))
-# define USB_FREEZE() (USBCON = ((1 << USBE) | (1 << FRZCLK)))
-#elif defined(__AVR_AT90USB646__)
-# define HW_CONFIG() (UHWCON = 0x81)
-# define PLL_CONFIG() (PLLCSR = 0x1A)
-# define USB_CONFIG() (USBCON = ((1 << USBE) | (1 << OTGPADE)))
-# define USB_FREEZE() (USBCON = ((1 << USBE) | (1 << FRZCLK)))
-#elif defined(__AVR_AT90USB1286__)
-# define HW_CONFIG() (UHWCON = 0x81)
-# define PLL_CONFIG() (PLLCSR = 0x16)
-# define USB_CONFIG() (USBCON = ((1 << USBE) | (1 << OTGPADE)))
-# define USB_FREEZE() (USBCON = ((1 << USBE) | (1 << FRZCLK)))
-#endif
-
-// standard control endpoint request types
-#define GET_STATUS 0
-#define CLEAR_FEATURE 1
-#define SET_FEATURE 3
-#define SET_ADDRESS 5
-#define GET_DESCRIPTOR 6
-#define GET_CONFIGURATION 8
-#define SET_CONFIGURATION 9
-#define GET_INTERFACE 10
-#define SET_INTERFACE 11
-// HID (human interface device)
-#define HID_GET_REPORT 1
-#define HID_GET_IDLE 2
-#define HID_GET_PROTOCOL 3
-#define HID_SET_REPORT 9
-#define HID_SET_IDLE 10
-#define HID_SET_PROTOCOL 11
-#define HID_REPORT_INPUT 1
-#define HID_REPORT_OUTPUT 2
-#define HID_REPORT_FEATURE 3
-// CDC (communication class device)
-#define CDC_SET_LINE_CODING 0x20
-#define CDC_GET_LINE_CODING 0x21
-#define CDC_SET_CONTROL_LINE_STATE 0x22
-// HID feature selectors
-#define DEVICE_REMOTE_WAKEUP 1
-#define ENDPOINT_HALT 0
-#define TEST_MODE 2
-
-/*------------------------------------------------------------------*
- * Keyboard descriptor setting
- *------------------------------------------------------------------*/
-#define KBD_INTERFACE 0
-#define KBD_ENDPOINT 1
-#define KBD_SIZE 8
-#define KBD_BUFFER EP_SINGLE_BUFFER
-#define KBD_REPORT_KEYS (KBD_SIZE - 2)
-
-// secondary keyboard
-#ifdef NKRO_ENABLE
-# define KBD2_INTERFACE 4
-# define KBD2_ENDPOINT 5
-# define KBD2_SIZE 16
-# define KBD2_BUFFER EP_DOUBLE_BUFFER
-# define KBD2_REPORT_KEYS (KBD2_SIZE - 1)
-#endif
-
-#endif
diff --git a/tmk_core/protocol/pjrc/usb_debug.c b/tmk_core/protocol/pjrc/usb_debug.c
deleted file mode 100644
index 7e78d96c35..0000000000
--- a/tmk_core/protocol/pjrc/usb_debug.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <avr/interrupt.h>
-#include "sendchar.h"
-#include "usb_debug.h"
-
-// the time remaining before we transmit any partially full
-// packet, or send a zero length packet.
-volatile uint8_t debug_flush_timer = 0;
-
-int8_t sendchar(uint8_t c) {
- static uint8_t previous_timeout = 0;
- uint8_t timeout, intr_state;
-
- // if we're not online (enumerated and configured), error
- if (!usb_configured()) return -1;
- // interrupts are disabled so these functions can be
- // used from the main program or interrupt context,
- // even both in the same program!
- intr_state = SREG;
- cli();
- UENUM = DEBUG_TX_ENDPOINT;
- // if we gave up due to timeout before, don't wait again
- if (previous_timeout) {
- if (!(UEINTX & (1 << RWAL))) {
- SREG = intr_state;
- return -1;
- }
- previous_timeout = 0;
- }
- // wait for the FIFO to be ready to accept data
- timeout = UDFNUML + 4;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1 << RWAL)) break;
- SREG = intr_state;
- // have we waited too long?
- if (UDFNUML == timeout) {
- previous_timeout = 1;
- return -1;
- }
- // has the USB gone offline?
- if (!usb_configured()) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = DEBUG_TX_ENDPOINT;
- }
- // actually write the byte into the FIFO
- UEDATX = c;
- // if this completed a packet, transmit it now!
- if (!(UEINTX & (1 << RWAL))) {
- UEINTX = 0x3A;
- debug_flush_timer = 0;
- } else {
- debug_flush_timer = 2;
- }
- SREG = intr_state;
- return 0;
-}
-
-// immediately transmit any buffered output.
-void usb_debug_flush_output(void) {
- uint8_t intr_state;
-
- intr_state = SREG;
- cli();
- if (debug_flush_timer) {
- UENUM = DEBUG_TX_ENDPOINT;
- while ((UEINTX & (1 << RWAL))) {
- UEDATX = 0;
- }
- UEINTX = 0x3A;
- debug_flush_timer = 0;
- }
- SREG = intr_state;
-}
diff --git a/tmk_core/protocol/pjrc/usb_debug.h b/tmk_core/protocol/pjrc/usb_debug.h
deleted file mode 100644
index efe075fa97..0000000000
--- a/tmk_core/protocol/pjrc/usb_debug.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_DEBUG_H
-#define USB_DEBUG_H 1
-
-#include <stdint.h>
-#include "usb.h"
-
-#define DEBUG_INTERFACE 2
-#define DEBUG_TX_ENDPOINT 3
-#define DEBUG_TX_SIZE 32
-#define DEBUG_TX_BUFFER EP_DOUBLE_BUFFER
-
-extern volatile uint8_t debug_flush_timer;
-
-void usb_debug_flush_output(void); // immediately transmit any buffered output
-
-#endif
diff --git a/tmk_core/protocol/pjrc/usb_extra.c b/tmk_core/protocol/pjrc/usb_extra.c
deleted file mode 100644
index 1745e651c7..0000000000
--- a/tmk_core/protocol/pjrc/usb_extra.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <util/delay.h>
-#include <avr/interrupt.h>
-#include "host.h"
-#include "usb_extra.h"
-
-int8_t usb_extra_send(uint8_t report_id, uint16_t data) {
- uint8_t intr_state, timeout;
-
- if (!usb_configured()) return -1;
- intr_state = SREG;
- cli();
- UENUM = EXTRA_ENDPOINT;
- timeout = UDFNUML + 50;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1 << RWAL)) break;
- SREG = intr_state;
- // has the USB gone offline?
- if (!usb_configured()) return -1;
- // have we waited too long?
- if (UDFNUML == timeout) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = EXTRA_ENDPOINT;
- }
-
- UEDATX = report_id;
- UEDATX = data & 0xFF;
- UEDATX = (data >> 8) & 0xFF;
-
- UEINTX = 0x3A;
- SREG = intr_state;
- return 0;
-}
-
-int8_t usb_extra_consumer_send(uint16_t bits) { return usb_extra_send(REPORT_ID_CONSUMER, bits); }
-
-int8_t usb_extra_system_send(uint16_t bits) { return usb_extra_send(REPORT_ID_SYSTEM, bits); }
diff --git a/tmk_core/protocol/pjrc/usb_extra.h b/tmk_core/protocol/pjrc/usb_extra.h
deleted file mode 100644
index 674d582ac2..0000000000
--- a/tmk_core/protocol/pjrc/usb_extra.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_EXTRA_H
-#define USB_EXTRA_H 1
-/*
- * Enhanced keyboard features for Windows:
- * Audio control and System control
- *
- * http://www.microsoft.com/whdc/archive/w2kbd.mspx
- */
-
-#include <stdint.h>
-#include "usb.h"
-
-#define EXTRA_INTERFACE 3
-#define EXTRA_ENDPOINT 4
-#define EXTRA_SIZE 8
-#define EXTRA_BUFFER EP_DOUBLE_BUFFER
-
-int8_t usb_extra_consumer_send(uint16_t bits);
-int8_t usb_extra_system_send(uint16_t bits);
-
-#endif
diff --git a/tmk_core/protocol/pjrc/usb_keyboard.c b/tmk_core/protocol/pjrc/usb_keyboard.c
deleted file mode 100644
index 31856d0fda..0000000000
--- a/tmk_core/protocol/pjrc/usb_keyboard.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "usb_keyboard.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "host.h"
-
-#ifdef NKRO_ENABLE
-# include "keycode_config.h"
-
-extern keymap_config_t keymap_config;
-#endif
-
-// protocol setting from the host. We use exactly the same report
-// either way, so this variable only stores the setting since we
-// are required to be able to report which setting is in use.
-uint8_t keyboard_protocol = 1;
-
-// the idle configuration, how often we send the report to the
-// host (ms * 4) even when it hasn't changed
-// Windows and Linux set 0 while OS X sets 6(24ms) by SET_IDLE request.
-uint8_t keyboard_idle = 125;
-
-// count until idle timeout
-uint8_t usb_keyboard_idle_count = 0;
-
-// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
-volatile uint8_t usb_keyboard_leds = 0;
-
-static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, uint8_t keys_start, uint8_t keys_end);
-
-int8_t usb_keyboard_send_report(report_keyboard_t *report) {
- int8_t result = 0;
-
-#ifdef NKRO_ENABLE
- if (keymap_config.nkro)
- result = send_report(report, KBD2_ENDPOINT, 0, KBD2_SIZE);
- else
-#endif
- {
- result = send_report(report, KBD_ENDPOINT, 0, KBD_SIZE);
- }
-
- if (result) return result;
- usb_keyboard_idle_count = 0;
- usb_keyboard_print_report(report);
- return 0;
-}
-
-void usb_keyboard_print_report(report_keyboard_t *report) {
- if (!debug_keyboard) return;
- print("keys: ");
- for (int i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
- phex(report->keys[i]);
- print(" ");
- }
- print(" mods: ");
- phex(report->mods);
- print("\n");
-}
-
-static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, uint8_t keys_start, uint8_t keys_end) {
- uint8_t intr_state, timeout;
-
- if (!usb_configured()) return -1;
- intr_state = SREG;
- cli();
- UENUM = endpoint;
- timeout = UDFNUML + 50;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1 << RWAL)) break;
- SREG = intr_state;
- // has the USB gone offline?
- if (!usb_configured()) return -1;
- // have we waited too long?
- if (UDFNUML == timeout) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = endpoint;
- }
- for (uint8_t i = keys_start; i < keys_end; i++) {
- UEDATX = report->raw[i];
- }
- UEINTX = 0x3A;
- SREG = intr_state;
- return 0;
-}
diff --git a/tmk_core/protocol/pjrc/usb_keyboard.h b/tmk_core/protocol/pjrc/usb_keyboard.h
deleted file mode 100644
index 919685fde4..0000000000
--- a/tmk_core/protocol/pjrc/usb_keyboard.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_KEYBOARD_H
-#define USB_KEYBOARD_H 1
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "usb.h"
-#include "host.h"
-
-extern uint8_t usb_keyboard_idle_count;
-extern volatile uint8_t usb_keyboard_leds;
-
-int8_t usb_keyboard_send_report(report_keyboard_t *report);
-void usb_keyboard_print_report(report_keyboard_t *report);
-
-#endif
diff --git a/tmk_core/protocol/pjrc/usb_mouse.c b/tmk_core/protocol/pjrc/usb_mouse.c
deleted file mode 100644
index 9e3639571c..0000000000
--- a/tmk_core/protocol/pjrc/usb_mouse.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* USB Mouse Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_mouse.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "usb_mouse.h"
-#include "print.h"
-#include "debug.h"
-
-uint8_t usb_mouse_protocol = 1;
-
-int8_t usb_mouse_send(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons) {
- uint8_t intr_state, timeout;
-
- if (!usb_configured()) return -1;
- if (x == -128) x = -127;
- if (y == -128) y = -127;
- if (wheel_v == -128) wheel_v = -127;
- if (wheel_h == -128) wheel_h = -127;
- intr_state = SREG;
- cli();
- UENUM = MOUSE_ENDPOINT;
- timeout = UDFNUML + 50;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1 << RWAL)) break;
- SREG = intr_state;
- // has the USB gone offline?
- if (!usb_configured()) return -1;
- // have we waited too long?
- if (UDFNUML == timeout) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = MOUSE_ENDPOINT;
- }
- UEDATX = buttons;
- UEDATX = x;
- UEDATX = y;
- if (usb_mouse_protocol) {
- UEDATX = wheel_v;
- UEDATX = wheel_h;
- }
-
- UEINTX = 0x3A;
- SREG = intr_state;
- return 0;
-}
-
-void usb_mouse_print(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons) {
- if (!debug_mouse) return;
- print("usb_mouse[btn|x y v h]: ");
- phex(buttons);
- print("|");
- phex(x);
- print(" ");
- phex(y);
- print(" ");
- phex(wheel_v);
- print(" ");
- phex(wheel_h);
- print("\n");
-}
diff --git a/tmk_core/protocol/pjrc/usb_mouse.h b/tmk_core/protocol/pjrc/usb_mouse.h
deleted file mode 100644
index ba7df230de..0000000000
--- a/tmk_core/protocol/pjrc/usb_mouse.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* USB Mouse Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_mouse.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef USB_MOUSE_H
-#define USB_MOUSE_H 1
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "usb.h"
-
-#define MOUSE_INTERFACE 1
-#define MOUSE_ENDPOINT 2
-#define MOUSE_SIZE 8
-#define MOUSE_BUFFER EP_SINGLE_BUFFER
-
-#define MOUSE_BTN1 (1 << 0)
-#define MOUSE_BTN2 (1 << 1)
-#define MOUSE_BTN3 (1 << 2)
-#define MOUSE_BTN4 (1 << 3)
-#define MOUSE_BTN5 (1 << 4)
-
-extern uint8_t usb_mouse_protocol;
-
-int8_t usb_mouse_send(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons);
-void usb_mouse_print(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons);
-
-#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 17:31:58 +0000