diff options
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/settings.h')
| -rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/settings.h | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/settings.h b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/settings.h new file mode 100644 index 0000000000..5c060354ba --- /dev/null +++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/settings.h @@ -0,0 +1,139 @@ +/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#ifndef USB_HOST_SHIELD_SETTINGS_H +#define USB_HOST_SHIELD_SETTINGS_H +#include "macros.h" + +//////////////////////////////////////////////////////////////////////////////// +// DEBUGGING +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 to activate serial debugging */ +#define ENABLE_UHS_DEBUGGING 0 + +/* This can be used to select which serial port to use for debugging if + * multiple serial ports are available. + * For example Serial3. + */ +#ifndef USB_HOST_SERIAL +#define USB_HOST_SERIAL Serial +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Manual board activation +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */ +#define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually + +/* Set this to 1 if you are using a Black Widdow */ +#define USE_UHS_BLACK_WIDDOW 0 + +/* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */ +#define USE_XMEM_SPI_LOCK 0 + +//////////////////////////////////////////////////////////////////////////////// +// Wii IR camera +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 to activate code for the Wii IR camera */ +#define ENABLE_WII_IR_CAMERA 0 + +//////////////////////////////////////////////////////////////////////////////// +// MASS STORAGE +//////////////////////////////////////////////////////////////////////////////// +// <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>> +// Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives. +// Each LUN needs ~13 bytes to be able to track the state of each unit. +#ifndef MASS_MAX_SUPPORTED_LUN +#define MASS_MAX_SUPPORTED_LUN 8 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Set to 1 to use the faster spi4teensy3 driver. +//////////////////////////////////////////////////////////////////////////////// +#ifndef USE_SPI4TEENSY3 +#define USE_SPI4TEENSY3 1 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// AUTOMATIC Settings +//////////////////////////////////////////////////////////////////////////////// + +// No user serviceable parts below this line. +// DO NOT change anything below here unless you are a developer! + +#include "version_helper.h" + +#if defined(__GNUC__) && defined(__AVR__) +#ifndef GCC_VERSION +#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) +#endif +#if GCC_VERSION < 40602 // Test for GCC < 4.6.2 +#ifdef PROGMEM +#undef PROGMEM +#define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4 +#ifdef PSTR +#undef PSTR +#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source +#endif +#endif +#endif +#endif + +#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING +#define DEBUG_USB_HOST +#endif + +#if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA +#define WIICAMERA +#endif + +// To use some other locking (e.g. freertos), +// define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock. +// NOTE: NO argument is passed. You have to do this within your routine for +// whatever you are using to lock and unlock. +#if !defined(XMEM_ACQUIRE_SPI) +#if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API) +#include <xmem.h> +#else +#define XMEM_ACQUIRE_SPI() (void(0)) +#define XMEM_RELEASE_SPI() (void(0)) +#endif +#endif + +#if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP) +#include <xmem.h> +#else +#define EXT_RAM 0 +#endif + +#if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__)) +#define USING_SPI4TEENSY3 USE_SPI4TEENSY3 +#else +#define USING_SPI4TEENSY3 0 +#endif + +#if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3 +#include <SPI.h> // Use the Arduino SPI library for the Arduino Due, RedBearLab nRF51822, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available +#endif +#if defined(__PIC32MX__) || defined(__PIC32MZ__) +#include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library +#endif + +#endif /* SETTINGS_H */ |