1 files changed, 64 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/Makefile b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/Makefile
new file mode 100644
index 0000000000..8a12ddc047
--- /dev/null
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/testusbhostFAT/Makefile
@@ -0,0 +1,64 @@
+#
+# These are set for a mega 1280 + quadram plus my serial patch.
+# If you lack quadram, or want to disable LFN, just change _FS_TINY=1 _USE_LFN=0
+#
+# If your board is a mega 2560 comment out the following two lines
+BOARD = mega
+
+BOARD_SUB = mega.menu.cpu.atmega1280
+PROGRAMMER = arduino
+
+# ...and then uncomment out the following two lines
+#BOARD_SUB = mega.menu.cpu.atmega2560
+#PROGRAMMER = wiring
+
+#BOARD = teensypp2
+#BOARD = teensy3
+#BOARD = teensy31
+
+# set your Arduino tty port here
+PORT = /dev/ttyUSB0
+
+EXTRA_FLAGS = -D _USE_LFN=3
+
+# change to 0 if you have quadram to take advantage of caching FAT
+EXTRA_FLAGS += -D _FS_TINY=1
+
+
+EXTRA_FLAGS += -D _MAX_SS=512
+
+
+# Don't worry if you don't have external RAM, xmem2 detects this situation.
+# You *WILL* be wanting to get some kind of external ram on your mega in order to
+# do anything that is intense.
+EXTRA_FLAGS += -D EXT_RAM_STACK=1
+EXTRA_FLAGS += -D EXT_RAM_HEAP=1
+
+
+# These are no longer needed for the demo to work.
+# In the event you need more ram, uncomment these 3 lines.
+#EXTRA_FLAGS += -D DISABLE_SERIAL1
+#EXTRA_FLAGS += -D DISABLE_SERIAL2
+#EXTRA_FLAGS += -D DISABLE_SERIAL3
+
+#
+# Advanced debug on Serial3
+#
+
+# uncomment the next two to enable debug on Serial3
+EXTRA_FLAGS += -D USB_HOST_SERIAL=Serial3
+#EXTRA_FLAGS += -D DEBUG_USB_HOST
+
+# The following are the libraries used.
+LIB_DIRS += ../../
+LIB_DIRS += ../testusbhostFAT/xmem2
+LIB_DIRS += ../testusbhostFAT/generic_storage
+LIB_DIRS += ../testusbhostFAT/RTClib
+LIB_DIRS += $(ARD_HOME)/libraries/Wire
+LIB_DIRS += $(ARD_HOME)/libraries/Wire/utility
+LIB_DIRS += $(ARD_HOME)/hardware/arduino/$(BUILD_ARCH)/libraries/Wire
+LIB_DIRS += $(ARD_HOME)/hardware/arduino/$(BUILD_ARCH)/libraries/Wire/utility
+LIB_DIRS += $(ARD_HOME)/hardware/arduino/$(BUILD_ARCH)/libraries/SPI
+
+# And finally, the part that brings everything together for you.
+include Arduino_Makefile_master/_Makefile.master