diff options
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303')
4 files changed, 0 insertions, 523 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gprs_terminal/pl2303_gprs_terminal.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gprs_terminal/pl2303_gprs_terminal.ino deleted file mode 100644 index 7c4c9f6cbe..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gprs_terminal/pl2303_gprs_terminal.ino +++ /dev/null @@ -1,101 +0,0 @@ -/* Arduino terminal for PL2303 USB to serial converter and DealeXtreme GPRS modem. */ -/* USB support */ -#include <usbhub.h> -/* CDC support */ -#include <cdcacm.h> -#include <cdcprolific.h> - -// Satisfy the IDE, which needs to see the include statment in the ino too. -#ifdef dobogusinclude -#include <spi4teensy3.h> -#include <SPI.h> -#endif - -class PLAsyncOper : public CDCAsyncOper -{ -public: - uint8_t OnInit(ACM *pacm); -}; - -uint8_t PLAsyncOper::OnInit(ACM *pacm) -{ - uint8_t rcode; - - // Set DTR = 1 - rcode = pacm->SetControlLineState(1); - - if (rcode) - { - ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode); - return rcode; - } - - LINE_CODING lc; - //lc.dwDTERate = 9600; - lc.dwDTERate = 115200; - lc.bCharFormat = 0; - lc.bParityType = 0; - lc.bDataBits = 8; - - rcode = pacm->SetLineCoding(&lc); - - if (rcode) - ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode); - - return rcode; -} -USB Usb; -//USBHub Hub(&Usb); -PLAsyncOper AsyncOper; -PL2303 Pl(&Usb, &AsyncOper); - -void setup() -{ - Serial.begin( 115200 ); -#if !defined(__MIPSEL__) - while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection -#endif - Serial.println("Start"); - - if (Usb.Init() == -1) - Serial.println("OSCOKIRQ failed to assert"); - - delay( 200 ); -} - -void loop() -{ - Usb.Task(); - - if( Usb.getUsbTaskState() == USB_STATE_RUNNING ) - { - uint8_t rcode; - - /* reading the keyboard */ - if(Serial.available()) { - uint8_t data= Serial.read(); - - /* sending to the phone */ - rcode = Pl.SndData(1, &data); - if (rcode) - ErrorMessage<uint8_t>(PSTR("SndData"), rcode); - }//if(Serial.available()... - - /* reading the converter */ - /* buffer size must be greater or equal to max.packet size */ - /* it it set to 64 (largest possible max.packet size) here, can be tuned down - for particular endpoint */ - uint8_t buf[64]; - uint16_t rcvd = 64; - rcode = Pl.RcvData(&rcvd, buf); - if (rcode && rcode != hrNAK) - ErrorMessage<uint8_t>(PSTR("Ret"), rcode); - - if( rcvd ) { //more than zero bytes received - for(uint16_t i=0; i < rcvd; i++ ) { - Serial.print((char)buf[i]); //printing on the screen - } - }//if( rcvd ... - }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING.. -} - diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino deleted file mode 100644 index e8c8a02230..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_gps/pl2303_gps.ino +++ /dev/null @@ -1,88 +0,0 @@ -/* USB Host to PL2303-based USB GPS unit interface */ -/* Navibee GM720 receiver - Sirf Star III */ -/* USB support */ -#include <usbhub.h> -/* CDC support */ -#include <cdcacm.h> -#include <cdcprolific.h> - -// Satisfy the IDE, which needs to see the include statment in the ino too. -#ifdef dobogusinclude -#include <spi4teensy3.h> -#include <SPI.h> -#endif - -class PLAsyncOper : public CDCAsyncOper { -public: - uint8_t OnInit(ACM *pacm); -}; - -uint8_t PLAsyncOper::OnInit(ACM *pacm) { - uint8_t rcode; - - // Set DTR = 1 - rcode = pacm->SetControlLineState(1); - - if(rcode) { - ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode); - return rcode; - } - - LINE_CODING lc; - lc.dwDTERate = 4800; //default serial speed of GPS unit - lc.bCharFormat = 0; - lc.bParityType = 0; - lc.bDataBits = 8; - - rcode = pacm->SetLineCoding(&lc); - - if(rcode) - ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode); - - return rcode; -} - -USB Usb; -USBHub Hub(&Usb); -PLAsyncOper AsyncOper; -PL2303 Pl(&Usb, &AsyncOper); -uint32_t read_delay; -#define READ_DELAY 100 - -void setup() { - Serial.begin(115200); -#if !defined(__MIPSEL__) - while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection -#endif - Serial.println("Start"); - - if(Usb.Init() == -1) - Serial.println("OSCOKIRQ failed to assert"); - - delay(200); -} - -void loop() { - uint8_t rcode; - uint8_t buf[64]; //serial buffer equals Max.packet size of bulk-IN endpoint - uint16_t rcvd = 64; - - Usb.Task(); - - if(Pl.isReady()) { - /* reading the GPS */ - if((long)(millis() - read_delay) >= 0L) { - read_delay += READ_DELAY; - rcode = Pl.RcvData(&rcvd, buf); - if(rcode && rcode != hrNAK) - ErrorMessage<uint8_t>(PSTR("Ret"), rcode); - if(rcvd) { //more than zero bytes received - for(uint16_t i = 0; i < rcvd; i++) { - Serial.print((char)buf[i]); //printing on the screen - }//for( uint16_t i=0; i < rcvd; i++... - }//if( rcvd - }//if( read_delay > millis()... - }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING.. -} - - diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_tinygps/pl2303_tinygps.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_tinygps/pl2303_tinygps.ino deleted file mode 100644 index d527eabe00..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_tinygps/pl2303_tinygps.ino +++ /dev/null @@ -1,217 +0,0 @@ -/* USB Host to PL2303-based USB GPS unit interface */ -/* Navibee GM720 receiver - Sirf Star III */ -/* Mikal Hart's TinyGPS library */ -/* test_with_gps_device library example modified for PL2302 access */ - -/* USB support */ -#include <usbhub.h> - -/* CDC support */ -#include <cdcacm.h> -#include <cdcprolific.h> - -#include <TinyGPS.h> - -// Satisfy the IDE, which needs to see the include statment in the ino too. -#ifdef dobogusinclude -#include <spi4teensy3.h> -#include <SPI.h> -#endif - -/* This sample code demonstrates the normal use of a TinyGPS object. - Modified to be used with USB Host Shield Library r2.0 - and USB Host Shield 2.0 -*/ - -class PLAsyncOper : public CDCAsyncOper -{ -public: - uint8_t OnInit(ACM *pacm); -}; - -uint8_t PLAsyncOper::OnInit(ACM *pacm) -{ - uint8_t rcode; - - // Set DTR = 1 - rcode = pacm->SetControlLineState(1); - - if (rcode) { - ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode); - return rcode; - } - - LINE_CODING lc; - lc.dwDTERate = 4800; //default serial speed of GPS unit - lc.bCharFormat = 0; - lc.bParityType = 0; - lc.bDataBits = 8; - - rcode = pacm->SetLineCoding(&lc); - - if (rcode) { - ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode); - } - - return rcode; -} - -USB Usb; -//USBHub Hub(&Usb); -PLAsyncOper AsyncOper; -PL2303 Pl(&Usb, &AsyncOper); -TinyGPS gps; - -void gpsdump(TinyGPS &gps); -bool feedgps(); -void printFloat(double f, int digits = 2); - -void setup() -{ - - Serial.begin(115200); -#if !defined(__MIPSEL__) - while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection -#endif - - Serial.print("Testing TinyGPS library v. "); Serial.println(TinyGPS::library_version()); - Serial.println("by Mikal Hart"); - Serial.println(); - Serial.print("Sizeof(gpsobject) = "); Serial.println(sizeof(TinyGPS)); - Serial.println(); - /* USB Initialization */ - if (Usb.Init() == -1) { - Serial.println("OSCOKIRQ failed to assert"); - } - - delay( 200 ); -} - -void loop() -{ - Usb.Task(); - - if( Pl.isReady()) { - - bool newdata = false; - unsigned long start = millis(); - - // Every 5 seconds we print an update - while (millis() - start < 5000) { - if( feedgps()) { - newdata = true; - } - }//while (millis()... - - if (newdata) { - Serial.println("Acquired Data"); - Serial.println("-------------"); - gpsdump(gps); - Serial.println("-------------"); - Serial.println(); - }//if( newdata... - }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING... -} - -void printFloat(double number, int digits) -{ - // Handle negative numbers - if (number < 0.0) - { - Serial.print('-'); - number = -number; - } - - // Round correctly so that print(1.999, 2) prints as "2.00" - double rounding = 0.5; - for (uint8_t i=0; i<digits; ++i) - rounding /= 10.0; - - number += rounding; - - // Extract the integer part of the number and print it - unsigned long int_part = (unsigned long)number; - double remainder = number - (double)int_part; - Serial.print(int_part); - - // Print the decimal point, but only if there are digits beyond - if (digits > 0) - Serial.print("."); - - // Extract digits from the remainder one at a time - while (digits-- > 0) - { - remainder *= 10.0; - int toPrint = int(remainder); - Serial.print(toPrint); - remainder -= toPrint; - } -} - -void gpsdump(TinyGPS &gps) -{ - long lat, lon; - float flat, flon; - unsigned long age, date, time, chars; - int year; - byte month, day, hour, minute, second, hundredths; - unsigned short sentences, failed; - - gps.get_position(&lat, &lon, &age); - Serial.print("Lat/Long(10^-5 deg): "); Serial.print(lat); Serial.print(", "); Serial.print(lon); - Serial.print(" Fix age: "); Serial.print(age); Serial.println("ms."); - - feedgps(); // If we don't feed the gps during this long routine, we may drop characters and get checksum errors - - gps.f_get_position(&flat, &flon, &age); - Serial.print("Lat/Long(float): "); printFloat(flat, 5); Serial.print(", "); printFloat(flon, 5); - Serial.print(" Fix age: "); Serial.print(age); Serial.println("ms."); - - feedgps(); - - gps.get_datetime(&date, &time, &age); - Serial.print("Date(ddmmyy): "); Serial.print(date); Serial.print(" Time(hhmmsscc): "); Serial.print(time); - Serial.print(" Fix age: "); Serial.print(age); Serial.println("ms."); - - feedgps(); - - gps.crack_datetime(&year, &month, &day, &hour, &minute, &second, &hundredths, &age); - Serial.print("Date: "); Serial.print(static_cast<int>(month)); Serial.print("/"); Serial.print(static_cast<int>(day)); Serial.print("/"); Serial.print(year); - Serial.print(" Time: "); Serial.print(static_cast<int>(hour)); Serial.print(":"); Serial.print(static_cast<int>(minute)); Serial.print(":"); Serial.print(static_cast<int>(second)); Serial.print("."); Serial.print(static_cast<int>(hundredths)); - Serial.print(" Fix age: "); Serial.print(age); Serial.println("ms."); - - feedgps(); - - Serial.print("Alt(cm): "); Serial.print(gps.altitude()); Serial.print(" Course(10^-2 deg): "); Serial.print(gps.course()); Serial.print(" Speed(10^-2 knots): "); Serial.println(gps.speed()); - Serial.print("Alt(float): "); printFloat(gps.f_altitude()); Serial.print(" Course(float): "); printFloat(gps.f_course()); Serial.println(); - Serial.print("Speed(knots): "); printFloat(gps.f_speed_knots()); Serial.print(" (mph): "); printFloat(gps.f_speed_mph()); - Serial.print(" (mps): "); printFloat(gps.f_speed_mps()); Serial.print(" (kmph): "); printFloat(gps.f_speed_kmph()); Serial.println(); - - feedgps(); - - gps.stats(&chars, &sentences, &failed); - Serial.print("Stats: characters: "); Serial.print(chars); Serial.print(" sentences: "); Serial.print(sentences); Serial.print(" failed checksum: "); Serial.println(failed); -} - -bool feedgps() -{ - uint8_t rcode; - uint8_t buf[64]; //serial buffer equals Max.packet size of bulk-IN endpoint - uint16_t rcvd = 64; - { - /* reading the GPS */ - rcode = Pl.RcvData(&rcvd, buf); - if (rcode && rcode != hrNAK) - ErrorMessage<uint8_t>(PSTR("Ret"), rcode); - rcode = false; - if( rcvd ) { //more than zero bytes received - for( uint16_t i=0; i < rcvd; i++ ) { - if( gps.encode((char)buf[i])) { //feed a character to gps object - rcode = true; - }//if( gps.encode(buf[i]... - }//for( uint16_t i=0; i < rcvd; i++... - }//if( rcvd... - } - return( rcode ); -} - diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_xbee_terminal/pl2303_xbee_terminal.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_xbee_terminal/pl2303_xbee_terminal.ino deleted file mode 100644 index 67b7dab603..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/pl2303/pl2303_xbee_terminal/pl2303_xbee_terminal.ino +++ /dev/null @@ -1,117 +0,0 @@ -/* Arduino terminal for PL2303 USB to serial converter and XBee radio. */ -/* Inserts linefeed after carriage return in data sent to and received from Xbee */ -/* USB support */ -#include <usbhub.h> -/* CDC support */ -#include <cdcacm.h> -#include <cdcprolific.h> - -// Satisfy the IDE, which needs to see the include statment in the ino too. -#ifdef dobogusinclude -#include <spi4teensy3.h> -#include <SPI.h> -#endif - -class PLAsyncOper : public CDCAsyncOper -{ -public: - uint8_t OnInit(ACM *pacm); -}; - -uint8_t PLAsyncOper::OnInit(ACM *pacm) -{ - uint8_t rcode; - - // Set DTR = 1 - rcode = pacm->SetControlLineState(1); - - if (rcode) - { - ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode); - return rcode; - } - - LINE_CODING lc; - lc.dwDTERate = 115200; - lc.bCharFormat = 0; - lc.bParityType = 0; - lc.bDataBits = 8; - - rcode = pacm->SetLineCoding(&lc); - - if (rcode) - ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode); - - return rcode; -} -USB Usb; -//USBHub Hub(&Usb); -PLAsyncOper AsyncOper; -PL2303 Pl(&Usb, &AsyncOper); - -void setup() -{ - Serial.begin( 115200 ); -#if !defined(__MIPSEL__) - while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection -#endif - Serial.println("Start"); - - if (Usb.Init() == -1) - Serial.println("OSCOKIRQ failed to assert"); - - delay( 200 ); -} - -void loop() -{ - Usb.Task(); - - if( Usb.getUsbTaskState() == USB_STATE_RUNNING ) - { - uint8_t rcode; - - /* reading the keyboard */ - if(Serial.available()) { - uint8_t data= Serial.read(); - - if ( data == '\r' ) { - Serial.print("\r\n"); //insert linefeed - } - else { - Serial.print( data ); //echo back to the screen - } - - /* sending to the phone */ - rcode = Pl.SndData(1, &data); - if (rcode) - ErrorMessage<uint8_t>(PSTR("SndData"), rcode); - }//if(Serial.available()... - - delay(50); - - /* reading the converter */ - /* buffer size must be greater or equal to max.packet size */ - /* it it set to 64 (largest possible max.packet size) here, can be tuned down - for particular endpoint */ - uint8_t buf[64]; - uint16_t rcvd = 64; - rcode = Pl.RcvData(&rcvd, buf); - if (rcode && rcode != hrNAK) - ErrorMessage<uint8_t>(PSTR("Ret"), rcode); - - if( rcvd ) { //more than zero bytes received - for(uint16_t i=0; i < rcvd; i++ ) { - if( buf[i] =='\r' ) { - Serial.print("\r\n"); //insert linefeed - } - else { - Serial.print((char)buf[i]); //printing on the screen - } - } - } - delay(10); - }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING.. -} - - |