2 files changed, 100 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0
deleted file mode 160000
-Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino
new file mode 100644
index 0000000000..f509cda890
--- /dev/null
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino
@@ -0,0 +1,100 @@
+#include <cdcacm.h>
+#include <usbhub.h>
+
+#include "pgmstrings.h"
+
+// Satisfy the IDE, which needs to see the include statment in the ino too.
+#ifdef dobogusinclude
+#include <spi4teensy3.h>
+#include <SPI.h>
+#endif
+
+class ACMAsyncOper : public CDCAsyncOper
+{
+public:
+    uint8_t OnInit(ACM *pacm);
+};
+
+uint8_t ACMAsyncOper::OnInit(ACM *pacm)
+{
+    uint8_t rcode;
+    // Set DTR = 1 RTS=1
+    rcode = pacm->SetControlLineState(3);
+
+    if (rcode)
+    {
+        ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
+        return rcode;
+    }
+
+    LINE_CODING	lc;
+    lc.dwDTERate	= 115200;
+    lc.bCharFormat	= 0;
+    lc.bParityType	= 0;
+    lc.bDataBits	= 8;
+
+    rcode = pacm->SetLineCoding(&lc);
+
+    if (rcode)
+        ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
+
+    return rcode;
+}
+
+USB     Usb;
+//USBHub     Hub(&Usb);
+ACMAsyncOper  AsyncOper;
+ACM           Acm(&Usb, &AsyncOper);
+
+void setup()
+{
+  Serial.begin( 115200 );
+#if !defined(__MIPSEL__)
+  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
+#endif
+  Serial.println("Start");
+
+  if (Usb.Init() == -1)
+      Serial.println("OSCOKIRQ failed to assert");
+
+  delay( 200 );
+}
+
+void loop()
+{
+    Usb.Task();
+
+    if( Acm.isReady()) {
+       uint8_t rcode;
+
+       /* reading the keyboard */
+       if(Serial.available()) {
+         uint8_t data= Serial.read();
+         /* sending to the phone */
+         rcode = Acm.SndData(1, &data);
+         if (rcode)
+            ErrorMessage<uint8_t>(PSTR("SndData"), rcode);
+       }//if(Serial.available()...
+
+       delay(50);
+
+        /* reading the phone */
+        /* buffer size must be greater or equal to max.packet size */
+        /* it it set to 64 (largest possible max.packet size) here, can be tuned down
+        for particular endpoint */
+        uint8_t  buf[64];
+        uint16_t rcvd = 64;
+        rcode = Acm.RcvData(&rcvd, buf);
+         if (rcode && rcode != hrNAK)
+            ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
+
+            if( rcvd ) { //more than zero bytes received
+              for(uint16_t i=0; i < rcvd; i++ ) {
+                Serial.print((char)buf[i]); //printing on the screen
+              }
+            }
+        delay(10);
+    }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..
+}
+
+